Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-g246d93c1d (x86_64) (Linux: 7.0.0-rc3-lgci-xe-xe-4712-4082c266f2930288f-debug+ x86_64)
Out 
Using IGT_SRANDOM=1773394022 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.028s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.028s)
Dmesg
<6> [246.876247] Console: switching to colour dummy device 80x25
<6> [246.876964] [IGT] kms_force_connector_basic: executing
<7> [246.882221] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [246.882245] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.882259] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.886687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.886777] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.886787] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.891137] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.891180] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.891187] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.895537] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<6> [246.895976] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [246.896710] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [246.896722] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.896759] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.897212] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.897440] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [246.897822] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.898055] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.898082] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [246.898311] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [246.900761] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.900788] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [246.901063] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] status updated from disconnected to connected
<7> [246.901211] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [246.901220] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [246.901230] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [246.901238] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [246.901246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [246.901253] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [246.901286] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [246.901601] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [246.901683] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.901692] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.902155] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.902389] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [246.902758] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.902968] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.902983] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [246.903187] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [246.905445] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.905463] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [246.905964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [246.905974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [246.905983] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [246.905990] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [246.905996] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [246.906003] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [246.906518] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:551:HDMI-A-1] EDID override set
<7> [246.906570] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.906579] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.907442] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:551:HDMI-A-1] ELD monitor IGT
<7> [246.907453] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:551:HDMI-A-1] ELD size 24, SAD count 0
<7> [246.907665] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [246.907964] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [246.908384] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [246.908636] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [246.908969] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [246.908997] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [246.909013] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [246.909020] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [246.909027] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [246.909035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [246.909041] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [246.909048] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [246.909336] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:HDMI-A-1] EDID override reset
<7> [246.909669] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.909678] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.910379] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.910636] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [246.911089] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.911355] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.911374] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [246.911636] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [246.913978] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.913995] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [246.914257] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:551:HDMI-A-1] EDID changed, epoch counter 2
<7> [246.914418] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [246.914440] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [246.914457] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [246.914465] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [246.914472] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [246.914479] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [246.914486] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [246.914493] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [246.915056] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [246.915069] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.915079] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.919437] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] status updated from connected to disconnected
<7> [246.919457] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.919553] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.919562] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.919897] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [246.920043] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [246.923917] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<6> [246.924525] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [246.927238] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [246.928372] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [246.937536] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [246.937552] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [246.937675] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [246.937687] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [246.938876] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.939567] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [246.939986] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [246.940418] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [246.940924] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [246.940948] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [246.940962] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [246.940977] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [246.940991] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [246.941037] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [246.941390] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.941718] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.942617] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [246.942629] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [246.942641] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [246.942653] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]
<7> [246.942665] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]
<7> [246.943119] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected
<7> [246.943134] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [246.943146] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]
<7> [246.943539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [246.943549] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [246.943557] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [246.943968] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [246.943979] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.943988] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.948383] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.948393] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:511:eDP-1] enabled? yes
<7> [246.948402] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:DP-1] enabled? no
<7> [246.948409] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no
<7> [246.948414] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [246.948420] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-1] enabled? no
<7> [246.948483] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [246.948521] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:511:eDP-1] found preferred mode: 1920x1200
<7> [246.948528] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [246.948570] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 1920x1200 set (0,0)
<7> [246.954109] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [246.956048] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:511:eDP-1] force updated from 0 to 0 or reprobing
<7> [246.956062] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [246.956073] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [246.956863] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.957490] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [246.957944] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [246.958283] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [246.958666] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [246.958680] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [246.958691] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [246.958701] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [246.958712] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [246.958762] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [246.959103] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.959438] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.960257] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [246.960267] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [246.960277] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [246.960343] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [246.960353] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [246.961104] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.961696] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [246.962129] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [246.962420] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [246.962802] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [246.962814] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [246.962822] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [246.962831] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [246.962841] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [246.962873] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [246.963192] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.963532] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.964312] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [246.964320] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [246.964329] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [246.964560] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:511:eDP-1] EDID override reset
<7> [246.964603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [246.964611] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [246.965453] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.966000] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [246.966264] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [246.966526] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [246.966820] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [246.966831] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [246.966839] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [246.966848] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [246.966856] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [246.966887] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [246.967137] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.967398] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.968094] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [246.968102] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [246.968109] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [246.968323] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:520:DP-1] EDID override reset
<7> [246.968360] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]
<7> [246.968367] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]
<7> [246.968709] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected
<7> [246.968942] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:533:DP-2] EDID override reset
<7> [246.968979] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [246.968987] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]
<7> [246.969298] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [246.969495] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:DP-3] EDID override reset
<7> [246.969527] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [246.969534] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [246.969885] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [246.970191] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [246.970199] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.970207] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.971780] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [246.972369] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [246.972809] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [246.974519] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.974574] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.974582] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.978985] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.979159] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:HDMI-A-1] EDID override reset
<7> [246.979192] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.979199] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.983541] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.985269] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [246.985539] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [246.987381] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [246.987958] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [246.996236] Console: switching to colour frame buffer device 240x75
Created at 2026-03-13 09:37:22