Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-g246d93c1d (x86_64) (Linux: 7.0.0-rc3-lgci-xe-xe-4712-4082c266f2930288f-debug+ x86_64)
Out 
Using IGT_SRANDOM=1773394065 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.032s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.032s)
Dmesg
<6> [242.873490] Console: switching to colour dummy device 80x25
<6> [242.873678] [IGT] kms_force_connector_basic: executing
<7> [242.876986] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [242.876994] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.876998] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.881175] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [242.881209] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.881212] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.885361] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [242.885412] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.885415] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.889601] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<6> [242.889791] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [242.890027] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [242.890031] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.890034] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.890423] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [242.890512] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [242.890880] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [242.890962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [242.890970] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [242.891050] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [242.897104] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [242.897109] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [242.897188] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] status updated from disconnected to connected
<7> [242.897224] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [242.897226] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [242.897229] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [242.897232] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [242.897234] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [242.897236] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [242.897259] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.897262] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.897634] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [242.897717] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [242.898075] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [242.898156] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [242.898161] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [242.898240] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [242.898425] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [242.898472] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [242.904366] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [242.904373] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [242.904510] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [242.904513] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [242.904516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [242.904518] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [242.904522] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [242.904526] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [242.904719] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:516:HDMI-A-1] EDID override set
<7> [242.904737] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.904740] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.905058] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:516:HDMI-A-1] ELD monitor IGT
<7> [242.905063] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:516:HDMI-A-1] ELD size 24, SAD count 0
<7> [242.905351] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [242.905451] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [242.905816] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [242.905902] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [242.905994] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [242.906002] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [242.906008] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [242.906010] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [242.906013] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [242.906015] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [242.906018] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [242.906020] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [242.906107] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:HDMI-A-1] EDID override reset
<7> [242.906234] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.906237] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.906613] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [242.906694] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [242.907056] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [242.907138] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [242.907143] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [242.907223] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [242.913283] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [242.913288] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [242.913371] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:516:HDMI-A-1] EDID changed, epoch counter 2
<7> [242.913415] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [242.913422] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [242.913428] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [242.913431] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [242.913433] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [242.913436] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [242.913438] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [242.913440] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [242.913575] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [242.913579] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.913583] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.917716] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] status updated from connected to disconnected
<7> [242.917722] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [242.917742] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [242.917784] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [242.917806] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.917809] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.921964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<6> [242.922299] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [242.934045] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [242.934052] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [242.934099] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [242.934104] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [242.934595] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [242.934929] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [242.935224] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [242.935361] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [242.935532] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [242.935538] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [242.935542] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [242.935545] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [242.935560] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [242.935664] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [242.935749] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [242.936104] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [242.936107] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [242.936110] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [242.936113] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [242.936116] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [242.940285] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [242.940291] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1]
<7> [242.940294] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-1]
<7> [242.940480] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1] disconnected
<7> [242.940484] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [242.940487] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-2]
<7> [242.961503] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [242.982468] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.003437] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.024403] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.045363] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.066351] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.087337] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.108320] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.129313] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.150289] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.171259] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.192223] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.213193] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.234151] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.255107] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.276061] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.297021] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.317980] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.338938] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.359894] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.380850] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.401809] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.422767] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.443722] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.464677] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.485636] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.506595] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.527551] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.548506] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.569469] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.590427] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.611383] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.611492] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [243.611510] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [243.611548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [243.611552] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:544:DP-3]
<7> [243.611702] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [243.611951] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [243.611955] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:553:DP-4]
<7> [243.612101] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [243.612104] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes
<7> [243.612108] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:HDMI-A-1] enabled? no
<7> [243.612110] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-1] enabled? no
<7> [243.612112] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-2] enabled? no
<7> [243.612113] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:DP-3] enabled? no
<7> [243.612115] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:553:DP-4] enabled? no
<7> [243.612140] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [243.612152] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 3840x2160
<7> [243.612154] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [243.612171] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 3840x2160 set (0,0)
<7> [243.632025] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [243.632434] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:507:eDP-1] force updated from 0 to 0 or reprobing
<7> [243.632439] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [243.632443] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [243.632897] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [243.633315] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [243.633418] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [243.633508] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [243.633612] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [243.633617] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [243.633620] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [243.633623] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [243.633637] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [243.633724] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [243.633811] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [243.634163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [243.634166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [243.634170] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [243.634201] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [243.634204] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [243.634688] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [243.635134] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [243.635226] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [243.635401] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [243.635637] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [243.635645] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [243.635652] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [243.635658] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [243.635686] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [243.635834] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [243.635921] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [243.636262] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [243.636265] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [243.636268] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [243.636354] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:507:eDP-1] EDID override reset
<7> [243.636369] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [243.636380] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [243.636809] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [243.637106] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [243.637328] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [243.637559] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [243.637736] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [243.637740] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [243.637742] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [243.637745] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [243.637756] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [243.637841] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [243.637931] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [243.638271] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [243.638274] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [243.638277] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [243.638414] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [243.638418] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [243.638421] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [243.642582] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [243.642608] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [243.642611] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [243.646748] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [243.646852] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:HDMI-A-1] EDID override reset
<7> [243.646868] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [243.646871] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [243.651053] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [243.651208] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:525:DP-1] EDID override reset
<7> [243.651232] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1]
<7> [243.651237] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-1]
<7> [243.651506] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1] disconnected
<7> [243.651630] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-2] EDID override reset
<7> [243.651650] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [243.651654] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-2]
<7> [243.672731] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.693749] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.714756] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.735762] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.756765] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.777768] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.798770] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.819772] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.840772] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.861775] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.882776] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.903778] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.924779] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.945780] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.966783] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [243.987784] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.008785] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.029785] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.050791] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.071797] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.092805] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.113809] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.134813] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.155819] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.176828] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.197829] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.218829] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.239828] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.260827] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.281826] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.302826] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.323825] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [244.323968] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [244.323992] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [244.324152] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:DP-3] EDID override reset
<7> [244.324176] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [244.324181] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:544:DP-3]
<7> [244.324402] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [244.324520] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:553:DP-4] EDID override reset
<7> [244.324541] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [244.324545] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:553:DP-4]
<7> [244.324748] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [244.345332] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [244.345641] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [244.362035] Console: switching to colour frame buffer device 240x67
Created at 2026-03-13 09:37:21