Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-g611f1cac6 (x86_64) (Linux: 7.0.0-rc3-lgci-xe-xe-4711-721db23a9c232926f-debug+ x86_64)
Out 
Using IGT_SRANDOM=1773385284 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.027s)
Dmesg
<6> [246.182023] Console: switching to colour dummy device 80x25
<6> [246.182712] [IGT] kms_force_connector_basic: executing
<7> [246.188759] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [246.188782] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.188795] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.193252] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.193334] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.193344] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.197774] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.197820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.197827] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.202156] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<6> [246.202592] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [246.203274] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [246.203288] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.203295] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.203739] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.204007] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [246.204410] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.204644] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.204665] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [246.204893] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [246.207291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.207306] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [246.207535] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] status updated from disconnected to connected
<7> [246.207665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [246.207673] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [246.207681] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [246.207688] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [246.207695] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [246.207702] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [246.207730] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [246.207864] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [246.207929] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.207937] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.208766] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.209040] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [246.209453] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.209695] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.209714] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [246.209955] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [246.212299] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.212319] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [246.212700] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [246.212709] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [246.212718] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [246.212726] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [246.212734] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [246.212741] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [246.213259] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:551:HDMI-A-1] EDID override set
<7> [246.213310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.213319] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.213896] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:551:HDMI-A-1] ELD monitor IGT
<7> [246.213907] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:551:HDMI-A-1] ELD size 24, SAD count 0
<7> [246.214119] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [246.214369] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [246.214778] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [246.215037] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [246.215333] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [246.215357] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [246.215372] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [246.215380] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [246.215387] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [246.215394] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [246.215400] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [246.215407] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [246.215690] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:HDMI-A-1] EDID override reset
<7> [246.215951] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.215959] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.216526] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.216787] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [246.217229] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [246.217476] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.217492] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [246.217735] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [246.220063] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [246.220078] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [246.220326] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:551:HDMI-A-1] EDID changed, epoch counter 2
<7> [246.220480] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [246.220505] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [246.220525] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] probed modes:
<7> [246.220532] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [246.220539] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [246.220545] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [246.220551] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [246.220558] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [246.220898] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [246.220908] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.220917] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.225354] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] status updated from connected to disconnected
<7> [246.225374] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.225438] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [246.225559] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [246.225623] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.225632] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.230007] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<6> [246.230536] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [246.232972] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [246.234082] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [246.243140] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [246.243155] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [246.243277] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [246.243289] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [246.244025] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.244891] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [246.245301] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [246.245637] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [246.245972] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [246.246002] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [246.246011] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [246.246020] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [246.246028] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [246.246067] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [246.246353] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.246641] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.247407] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [246.247418] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [246.247428] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [246.247437] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]
<7> [246.247447] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]
<7> [246.247797] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected
<7> [246.247806] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [246.247813] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]
<7> [246.248175] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [246.248184] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [246.248192] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [246.248524] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [246.248533] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.248540] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.252901] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.252910] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:511:eDP-1] enabled? yes
<7> [246.252918] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:DP-1] enabled? no
<7> [246.252924] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:DP-2] enabled? no
<7> [246.252929] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [246.252935] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:551:HDMI-A-1] enabled? no
<7> [246.253007] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [246.253037] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:511:eDP-1] found preferred mode: 1920x1200
<7> [246.253045] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [246.253093] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 1920x1200 set (0,0)
<7> [246.259847] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [246.261268] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:511:eDP-1] force updated from 0 to 0 or reprobing
<7> [246.261278] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [246.261286] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [246.262033] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.262597] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [246.262933] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [246.263311] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [246.263629] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [246.263641] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [246.263650] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [246.263659] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [246.263669] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [246.263700] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [246.264006] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.264332] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.265071] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [246.265080] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [246.265089] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [246.265146] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [246.265154] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [246.265849] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.266423] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [246.266730] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [246.267036] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [246.267349] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [246.267360] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [246.267368] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [246.267376] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [246.267385] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [246.267416] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [246.267692] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.268161] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.268940] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [246.268948] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [246.268957] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [246.269190] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:511:eDP-1] EDID override reset
<7> [246.269230] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1]
<7> [246.269239] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:511:eDP-1]
<7> [246.269931] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [246.270526] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [246.270807] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [246.271148] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [246.271456] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [246.271466] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [246.271474] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [246.271483] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD monitor
<7> [246.271492] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:511:eDP-1] ELD size 20, SAD count 0
<7> [246.271519] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] VRR capable: yes
<7> [246.271790] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [246.272074] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:511:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [246.272781] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:511:eDP-1] probed modes:
<7> [246.272787] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [246.272795] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [246.273023] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:520:DP-1] EDID override reset
<7> [246.273066] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1]
<7> [246.273075] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:520:DP-1]
<7> [246.273395] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:DP-1] disconnected
<7> [246.273605] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:533:DP-2] EDID override reset
<7> [246.273644] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2]
<7> [246.273651] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:533:DP-2]
<7> [246.273962] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:DP-2] disconnected
<7> [246.274173] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:542:DP-3] EDID override reset
<7> [246.274208] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [246.274215] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [246.274525] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [246.274834] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:551:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [246.274843] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.274851] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.278028] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [246.278360] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [246.278655] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [246.279229] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.279281] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.279287] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.283597] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.283775] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:551:HDMI-A-1] EDID override reset
<7> [246.283807] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1]
<7> [246.283814] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:551:HDMI-A-1]
<7> [246.288212] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:551:HDMI-A-1] disconnected
<7> [246.290046] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [246.290345] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [246.293157] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [246.293811] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [246.301575] Console: switching to colour frame buffer device 240x75
Created at 2026-03-13 07:10:53