igt@kms_flip@basic-flip-vs-wf_vblank@a-edp1 on bat-wcl-1@IGT

Detail	Value
Duration	2.30 seconds
Igt-Version	IGT-Version: 2.3-g13f307912 (x86_64) (Linux: 7.0.0-rc2-lgci-xe-xe-4680-2590b5b38b7b67f86-debug+ x86_64)
Out	Using IGT_SRANDOM=1773051432 for randomisation Opened device: /dev/dri/card0 Using monotonic timestamps Starting subtest: basic-flip-vs-wf_vblank Starting dynamic subtest: A-eDP1 3840x2400: 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa Expected frametime: 16666us; measured 16665.7us +- 2.651us accuracy 0.05% Event flip: expected 40, counted 40, passrate = 100.00%, encoder type 2 Event vblank: expected 40, counted 40, passrate = 100.00%, encoder type 2 Dynamic subtest A-eDP1: SUCCESS (2.301s)
Err	Starting subtest: basic-flip-vs-wf_vblank Starting dynamic subtest: A-eDP1 Dynamic subtest A-eDP1: SUCCESS (2.301s)
Dmesg	<6> [210.394775] Console: switching to colour dummy device 80x25 <6> [210.395104] [IGT] kms_flip: executing <7> [210.412434] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] <7> [210.412466] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:398:HDMI-A-1] <7> [210.416864] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] disconnected <7> [210.417631] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] <7> [210.417642] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:407:DP-1] <7> [210.418006] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [210.418272] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] disconnected <7> [210.418959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] <7> [210.418968] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:416:DP-2] <7> [210.419276] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [210.419523] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] disconnected <7> [210.420423] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:eDP-1] <7> [210.420431] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:389:eDP-1] <7> [210.421132] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [210.421633] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [210.421892] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [210.422145] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [210.422474] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz <7> [210.422490] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <7> [210.422498] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] ELD monitor <7> [210.422506] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] ELD size 20, SAD count 0 <7> [210.422549] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:389:eDP-1] VRR capable: yes <7> [210.422819] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:389:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [210.423082] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:389:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [210.425014] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:eDP-1] probed modes: <7> [210.425026] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa <7> [210.425072] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] <7> [210.425081] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:398:HDMI-A-1] <7> [210.429407] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] disconnected <7> [210.429474] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] <7> [210.429486] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:407:DP-1] <7> [210.430011] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] disconnected <7> [210.430043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] <7> [210.430052] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:416:DP-2] <7> [210.430375] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] disconnected <6> [210.431344] [IGT] kms_flip: starting subtest basic-flip-vs-wf_vblank <6> [210.434735] [IGT] kms_flip: starting dynamic subtest A-eDP1 <7> [210.437647] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:425] <7> [210.439520] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:426] <7> [210.640680] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [210.640975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [210.641363] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [210.641704] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [210.641994] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [210.642270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5788527/8388608 link 385901/524288, found tu 0, data 0/0 link 0/0) <7> [210.642546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [210.642835] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [210.643101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0) <7> [210.643366] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0) <7> [210.643648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0) <7> [210.643912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0) <7> [210.644173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0) <7> [210.644436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0) <7> [210.644722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2400, found 0) <7> [210.644987] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2403, found 0) <7> [210.645250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2408, found 0) <7> [210.645513] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2484, found 0) <7> [210.645794] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2484, found 0) <7> [210.646055] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0) <7> [210.646316] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0) <7> [210.646595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0) <7> [210.646858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0) <7> [210.647117] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0) <7> [210.647377] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0) <7> [210.647660] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2400, found 0) <7> [210.647921] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2403, found 0) <7> [210.648181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2408, found 0) <7> [210.648440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2484, found 0) <7> [210.648715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2484, found 0) <7> [210.648977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [210.649237] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [210.649497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [210.649773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no) <7> [210.650038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [210.650299] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 596199, found 0) <7> [210.650570] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 596199, found 0) <7> [210.650831] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 810000, found 0) <7> [210.651092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0) <7> [210.651354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in vrr.guardband (expected 82, found 0) <7> [210.651629] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [210.651898] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0 <7> [210.652287] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [210.652511] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [210.652795] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4015) -> ( 0 - 0), size 4015 -> 0 <7> [210.652997] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4015 - 4096) -> ( 0 - 0), size 81 -> 0 <7> [210.653190] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [210.653383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 24, 24, 24, 24, 24, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [210.653586] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 31, 744, 744, 744, 744, 744, 0, 0, 45, 93, 107 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [210.653771] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 36, 820, 820, 820, 820, 820, 0, 0, 46, 104, 108 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [210.653995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [210.654292] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 11765 required 0 qgv_peak_bw: 19200 <7> [210.654597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 18130 required 0 qgv_peak_bw: 19200 <7> [210.654881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 21065 required 0 qgv_peak_bw: 19200 <7> [210.655162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 22000 required 0 qgv_peak_bw: 19200 <7> [210.655450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 19200 for required data rate: 0 <7> [210.655750] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 298100 kHz -> 0 kHz <7> [210.656083] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 37263 kHz -> 0 kHz <7> [210.656372] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [210.656669] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [210.656952] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [210.657288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [modeset] <7> [210.657591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [210.657874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [210.658155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [210.658433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [210.658725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [210.659003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [210.659411] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [210.660390] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [210.660835] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [210.661837] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [210.662196] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [210.863866] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:389:eDP-1] set backlight PWM = 0 <7> [210.864534] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [210.884980] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 turn panel power off <7> [210.885377] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power off time <7> [210.885719] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [210.936081] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [210.936463] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [210.937706] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [210.937999] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:388:DDI A/PHY A] - long <7> [210.938280] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [210.938686] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:388:DDI A/PHY A] <7> [210.938749] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [210.939153] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [210.939640] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:388:DDI A/PHY A] <7> [210.939923] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:397:DDI B/PHY B] <7> [210.940180] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:406:DDI TC1/PHY TC1] <7> [210.940426] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DP-MST A] <7> [210.940672] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:409:DP-MST B] <7> [210.940903] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST C] <7> [210.941131] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DDI TC2/PHY TC2] <7> [210.941359] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST A] <7> [210.941603] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST B] <7> [210.941832] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST C] <7> [210.942059] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:389:eDP-1] <7> [210.942371] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [210.942616] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [210.942832] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [210.943244] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [210.943548] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x2a000000) <7> [210.943952] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [210.944226] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [210.944587] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [210.944844] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [210.946945] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B] <7> [210.947337] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C] <7> [210.947647] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A] <7> [210.947715] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:eDP-1] <7> [210.947902] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:389:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [210.948276] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:388:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 596200 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [210.948594] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2235750 available 3240000 <7> [210.948897] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [210.949201] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:388:DDI A/PHY A] [CRTC:150:pipe A] <7> [210.949513] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [210.949845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [210.950141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [210.950435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [210.950745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5788527/8388608 link 385901/524288) <7> [210.951040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [210.951331] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [210.951612] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840) <7> [210.951880] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000) <7> [210.952145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840) <7> [210.952410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000) <7> [210.952695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888) <7> [210.952962] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920) <7> [210.953231] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2400) <7> [210.953495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2403) <7> [210.953775] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2408) <7> [210.954040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2484) <7> [210.954303] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2484) <7> [210.954580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840) <7> [210.954844] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000) <7> [210.955106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840) <7> [210.955370] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000) <7> [210.955736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888) <7> [210.956002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920) <7> [210.956266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2400) <7> [210.956530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2403) <7> [210.956811] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2408) <7> [210.957075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2484) <7> [210.957337] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2484) <7> [210.957613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [210.957876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [210.958140] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [210.958405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes) <7> [210.958687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [210.958954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 596199) <7> [210.959220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 596199) <7> [210.959485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 810000) <7> [210.959764] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1) <7> [210.960031] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in vrr.guardband (expected 0, found 82) <7> [210.960296] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [210.960695] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [210.960900] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [210.961156] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4015), size 0 -> 4015 <7> [210.961345] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4015 - 4096), size 0 -> 81 <7> [210.961529] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [210.961732] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 24, 24, 24, 24, 24, 0, 0, 0, 4, 0 <7> [210.961916] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 120, 720, 720, 720, 720, 720, 0, 0, 255, 120, 255 <7> [210.962098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 241, 841, 841, 841, 841, 841, 0, 0, 256, 241, 256 <7> [210.962325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2384796 num active planes 1 <7> [210.962640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 11765 required 2505 qgv_peak_bw: 19200 <7> [210.962929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 18130 required 2505 qgv_peak_bw: 19200 <7> [210.963212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 21065 required 2505 qgv_peak_bw: 19200 <7> [210.963487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 22000 required 2505 qgv_peak_bw: 19200 <7> [210.963772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 19200 for required data rate: 2505 <7> [210.964045] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 298100 kHz <7> [210.964374] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 37263 kHz <7> [210.964683] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [210.964768] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [210.964957] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz <7> [210.965153] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [210.965229] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 1, actual 1 <7> [210.965463] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [210.965541] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0 <7> [210.965817] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0 <7> [210.966081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [210.966367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [210.966666] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [210.966949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [210.967228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [210.967507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [210.967800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [210.968081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5788527, data_n: 8388608, link_m: 385901, link_n: 524288, tu: 64 <7> [210.968363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [210.968667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [210.968944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [210.969221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [210.969500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [210.969795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [210.970074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [210.970351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [210.970643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [210.970918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [210.971196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [210.971474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [210.971769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [210.972048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [210.972326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 2484, vmax: 2484, flipline: 2484, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76 <7> [210.972618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 2402, vmax vblank: 2402, vmin vtotal: 2484, vmax vtotal: 2484 <7> [210.972896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [210.973175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa <7> [210.973453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa <7> [210.973751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa <7> [210.974031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2400": 60 596199 3840 3888 3920 4000 2400 2403 2408 2484 0x40 0xa <7> [210.974309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa <7> [210.974605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pipe src: 3840x2400+0+0, pixel rate 596199, min cdclk 298100 <7> [210.974884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 54, ips linetime: 0 <7> [210.975162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [210.975439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [210.975733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [210.976012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [210.976290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes, <7> [210.976583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1, <7> [210.976861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0. <7> [210.977137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [210.977417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [210.977707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1 <7> [210.977987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [210.978266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [210.978545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0 <7> [210.978838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23 <7> [210.979116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [210.979392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [210.979680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [210.979958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [210.980235] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [210.980511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [210.980802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [210.981078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [210.981353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [210.981645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [210.981920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [210.982196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [210.982473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [210.982765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:425] 3840x2400 format = XR24 little-endian (0x34325258) modifier = 0x100000000000009, visible: yes <7> [210.983047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [210.983324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 3840.000000x2400.000000+0.000000+0.000000 dst: 3840x2400+0+0 <7> [210.983619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [210.983899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [210.984176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [210.984454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [210.984749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [210.985851] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [210.986165] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [210.986607] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [210.986969] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x28000000) <7> [210.987280] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 1 <7> [210.987611] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [210.987857] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=768 <7> [210.988141] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:388:DDI A/PHY A] <7> [210.988371] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:397:DDI B/PHY B] <7> [210.988606] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:406:DDI TC1/PHY TC1] <7> [210.988827] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DP-MST A] <7> [210.989046] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:409:DP-MST B] <7> [210.989263] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST C] <7> [210.989480] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DDI TC2/PHY TC2] <7> [210.989719] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST A] <7> [210.989936] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST B] <7> [210.990151] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST C] <7> [210.990401] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [210.990782] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [210.990989] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [210.991249] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [210.992629] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [210.992959] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [210.994961] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 turn panel power on <7> [210.995209] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power cycle (442 ms remaining) <7> [211.439849] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [211.447744] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [211.447767] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [211.488266] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [211.488832] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power on <7> [211.489223] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [211.574615] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010 <7> [211.574996] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:388:DDI A/PHY A] - long <7> [211.575306] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [211.575937] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:388:DDI A/PHY A] <7> [211.696325] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [211.696886] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 turning VDD on <7> [211.697243] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [211.699383] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 41 00 00 01 c0 02 00 02 00 00 0b 80 <7> [211.700758] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [211.701503] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07 <7> [211.702604] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [211.703717] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [211.704753] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Clock recovery OK <7> [211.705071] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] 8.1 Gbps link rate without sink TPS4 support <7> [211.705386] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using DP training pattern TPS3 <7> [211.706929] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [211.707349] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Link Training passed at link rate = 810000, lane count = 4 <7> [211.708165] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [211.708687] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [211.709040] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [211.709442] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:389:eDP-1] Performing OUI wait (0 ms) <7> [211.710061] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:389:eDP-1] set backlight PWM = 13818 <7> [211.725685] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [211.727603] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:389:eDP-1] <7> [211.728044] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [211.748750] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [211.749305] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [211.749884] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [212.011177] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [212.011765] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [212.059753] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [212.060369] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [212.060999] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [212.194683] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [212.195343] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [212.226770] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [212.227476] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [212.228198] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [212.361266] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [212.361977] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [212.393781] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [212.394493] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [212.395227] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [212.528138] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [212.528838] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [212.559772] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [212.560474] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [212.561184] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [212.692759] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:426] from all active usage due to RMFB ioctl <7> [212.692952] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:426] is removed <7> [212.693128] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4015) -> ( 0 - 0), size 4015 -> 0 <7> [212.693739] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [212.694129] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 4, 24, 24, 24, 24, 24, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [212.694488] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 120, 720, 720, 720, 720, 720, 0, 0, 255, 120, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [212.694858] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 241, 841, 841, 841, 841, 841, 0, 0, 256, 241, 256 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [212.695268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [212.695864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 11765 required 0 qgv_peak_bw: 19200 <7> [212.696400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 18130 required 0 qgv_peak_bw: 19200 <7> [212.696950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 21065 required 0 qgv_peak_bw: 19200 <7> [212.697468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 22000 required 0 qgv_peak_bw: 19200 <7> [212.698019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 19200 for required data rate: 0 <7> [212.701847] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [212.702450] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [212.704647] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [212.736215] [IGT] kms_flip: finished subtest A-eDP1, SUCCESS

<6> [210.394775] Console: switching to colour dummy device 80x25

<7> [210.412434] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1]

<7> [210.412466] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:398:HDMI-A-1]

<7> [210.416864] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] disconnected

<7> [210.417631] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1]

<7> [210.417642] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:407:DP-1]

<7> [210.418006] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [210.418272] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] disconnected

<7> [210.418959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2]

<7> [210.418968] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:416:DP-2]

<7> [210.419276] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [210.419523] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] disconnected

<7> [210.420423] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:eDP-1]

<7> [210.420431] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:389:eDP-1]

<7> [210.421132] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [210.421633] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [210.421892] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [210.422145] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [210.422474] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz

<7> [210.422490] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<7> [210.422498] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] ELD monitor

<7> [210.422506] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:389:eDP-1] ELD size 20, SAD count 0

<7> [210.422549] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:389:eDP-1] VRR capable: yes

<7> [210.422819] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:389:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [210.423082] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:389:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [210.425014] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:389:eDP-1] probed modes:

<7> [210.425026] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa

<7> [210.425072] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1]

<7> [210.425081] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:398:HDMI-A-1]

<7> [210.429407] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:398:HDMI-A-1] disconnected

<7> [210.429474] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1]

<7> [210.429486] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:407:DP-1]

<7> [210.430011] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:407:DP-1] disconnected

<7> [210.430043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2]

<7> [210.430052] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:416:DP-2]

<7> [210.430375] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:416:DP-2] disconnected

<6> [210.431344] [IGT] kms_flip: starting subtest basic-flip-vs-wf_vblank

<6> [210.434735] [IGT] kms_flip: starting dynamic subtest A-eDP1

<7> [210.437647] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:425]

<7> [210.439520] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:426]

<7> [210.640680] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [210.640975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [210.641363] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [210.641704] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [210.641994] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [210.642270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5788527/8388608 link 385901/524288, found tu 0, data 0/0 link 0/0)

<7> [210.642546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [210.642835] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [210.643101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 3840, found 0)

<7> [210.643366] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 4000, found 0)

<7> [210.643648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 3840, found 0)

<7> [210.643912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 4000, found 0)

<7> [210.644173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 3888, found 0)

<7> [210.644436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 3920, found 0)

<7> [210.644722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 2400, found 0)

<7> [210.644987] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 2403, found 0)

<7> [210.645250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 2408, found 0)

<7> [210.645513] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 2484, found 0)

<7> [210.645794] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 2484, found 0)

<7> [210.646055] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 3840, found 0)

<7> [210.646316] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 4000, found 0)

<7> [210.646595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 3840, found 0)

<7> [210.646858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 4000, found 0)

<7> [210.647117] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 3888, found 0)

<7> [210.647377] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 3920, found 0)

<7> [210.647660] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 2400, found 0)

<7> [210.647921] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 2403, found 0)

<7> [210.648181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 2408, found 0)

<7> [210.648440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 2484, found 0)

<7> [210.648715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 2484, found 0)

<7> [210.648977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [210.649237] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [210.649497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [210.649773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)

<7> [210.650038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [210.650299] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 596199, found 0)

<7> [210.650570] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 596199, found 0)

<7> [210.650831] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 810000, found 0)

<7> [210.651092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)

<7> [210.651354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in vrr.guardband (expected 82, found 0)

<7> [210.651629] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [210.651898] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0

<7> [210.652287] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [210.652511] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [210.652795] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4015) -> ( 0 - 0), size 4015 -> 0

<7> [210.652997] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4015 - 4096) -> ( 0 - 0), size 81 -> 0

<7> [210.653190] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [210.653383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 24, 24, 24, 24, 24, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [210.653586] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 31, 744, 744, 744, 744, 744, 0, 0, 45, 93, 107 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [210.653771] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 36, 820, 820, 820, 820, 820, 0, 0, 46, 104, 108 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [210.653995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [210.654292] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 11765 required 0 qgv_peak_bw: 19200

<7> [210.654597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 18130 required 0 qgv_peak_bw: 19200

<7> [210.654881] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 21065 required 0 qgv_peak_bw: 19200

<7> [210.655162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 22000 required 0 qgv_peak_bw: 19200

<7> [210.655450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 19200 for required data rate: 0

<7> [210.655750] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 298100 kHz -> 0 kHz

<7> [210.656083] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 37263 kHz -> 0 kHz

<7> [210.656372] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [210.656669] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [210.656952] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [210.657288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [modeset]

<7> [210.657591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [210.657874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [210.658155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [210.658433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [210.658725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [210.659003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [210.659411] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [210.660390] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [210.660835] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [210.661837] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [210.662196] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [210.863866] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:389:eDP-1] set backlight PWM = 0

<7> [210.864534] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [210.884980] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 turn panel power off

<7> [210.885377] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [210.885719] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [210.936081] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [210.936463] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [210.937706] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [210.937999] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:388:DDI A/PHY A] - long

<7> [210.938280] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [210.938686] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:388:DDI A/PHY A]

<7> [210.938749] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [210.939153] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [210.939640] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:388:DDI A/PHY A]

<7> [210.939923] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:397:DDI B/PHY B]

<7> [210.940180] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:406:DDI TC1/PHY TC1]

<7> [210.940426] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DP-MST A]

<7> [210.940672] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:409:DP-MST B]

<7> [210.940903] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST C]

<7> [210.941131] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DDI TC2/PHY TC2]

<7> [210.941359] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST A]

<7> [210.941603] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST B]

<7> [210.941832] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST C]

<7> [210.942059] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:389:eDP-1]

<7> [210.942371] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [210.942616] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [210.942832] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [210.943244] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [210.943548] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x2a000000)

<7> [210.943952] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [210.944226] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [210.944587] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [210.944844] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [210.946945] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]

<7> [210.947337] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:386:pipe C]

<7> [210.947647] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:150:pipe A]

<7> [210.947715] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:389:eDP-1]

<7> [210.947902] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:389:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [210.948276] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:388:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 596200 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [210.948594] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2235750 available 3240000

<7> [210.948897] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [210.949201] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:388:DDI A/PHY A] [CRTC:150:pipe A]

<7> [210.949513] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [210.949845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [210.950141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [210.950435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [210.950745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5788527/8388608 link 385901/524288)

<7> [210.951040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [210.951331] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [210.951612] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 3840)

<7> [210.951880] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 4000)

<7> [210.952145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 3840)

<7> [210.952410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 4000)

<7> [210.952695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 3888)

<7> [210.952962] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 3920)

<7> [210.953231] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 2400)

<7> [210.953495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 2403)

<7> [210.953775] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 2408)

<7> [210.954040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 2484)

<7> [210.954303] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 2484)

<7> [210.954580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 3840)

<7> [210.954844] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 4000)

<7> [210.955106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 3840)

<7> [210.955370] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 4000)

<7> [210.955736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 3888)

<7> [210.956002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 3920)

<7> [210.956266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 2400)

<7> [210.956530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 2403)

<7> [210.956811] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 2408)

<7> [210.957075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 2484)

<7> [210.957337] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 2484)

<7> [210.957613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [210.957876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [210.958140] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [210.958405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)

<7> [210.958687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [210.958954] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 596199)

<7> [210.959220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 596199)

<7> [210.959485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 810000)

<7> [210.959764] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1)

<7> [210.960031] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in vrr.guardband (expected 0, found 82)

<7> [210.960296] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [210.960695] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [210.960900] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [210.961156] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4015), size 0 -> 4015

<7> [210.961345] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4015 - 4096), size 0 -> 81

<7> [210.961529] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [210.961732] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 24, 24, 24, 24, 24, 0, 0, 0, 4, 0

<7> [210.961916] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 120, 720, 720, 720, 720, 720, 0, 0, 255, 120, 255

<7> [210.962098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 241, 841, 841, 841, 841, 841, 0, 0, 256, 241, 256

<7> [210.962325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 2384796 num active planes 1

<7> [210.962640] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 11765 required 2505 qgv_peak_bw: 19200

<7> [210.962929] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 18130 required 2505 qgv_peak_bw: 19200

<7> [210.963212] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 21065 required 2505 qgv_peak_bw: 19200

<7> [210.963487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 22000 required 2505 qgv_peak_bw: 19200

<7> [210.963772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 19200 for required data rate: 2505

<7> [210.964045] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 298100 kHz

<7> [210.964374] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 37263 kHz

<7> [210.964683] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [210.964768] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [210.964957] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 307200 kHz, actual 307200 kHz

<7> [210.965153] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [210.965229] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 1, actual 1

<7> [210.965463] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [210.965541] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0

<7> [210.965817] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0

<7> [210.966081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [210.966367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [210.966666] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [210.966949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [210.967228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [210.967507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [210.967800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [210.968081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5788527, data_n: 8388608, link_m: 385901, link_n: 524288, tu: 64

<7> [210.968363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [210.968667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [210.968944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [210.969221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [210.969500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [210.969795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [210.970074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [210.970351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [210.970643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [210.970918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [210.971196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [210.971474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [210.971769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [210.972048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [210.972326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 2484, vmax: 2484, flipline: 2484, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76

<7> [210.972618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 2402, vmax vblank: 2402, vmin vtotal: 2484, vmax vtotal: 2484

<7> [210.972896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [210.973175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa

<7> [210.973453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa

<7> [210.973751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa

<7> [210.974031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2400": 60 596199 3840 3888 3920 4000 2400 2403 2408 2484 0x40 0xa

<7> [210.974309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa

<7> [210.974605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pipe src: 3840x2400+0+0, pixel rate 596199, min cdclk 298100

<7> [210.974884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 54, ips linetime: 0

<7> [210.975162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [210.975439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [210.975733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [210.976012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [210.976290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,

<7> [210.976583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,

<7> [210.976861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.

<7> [210.977137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [210.977417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [210.977707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1

<7> [210.977987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [210.978266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [210.978545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0

<7> [210.978838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23

<7> [210.979116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [210.979392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [210.979680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [210.979958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [210.980235] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [210.980511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [210.980802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [210.981078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [210.981353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [210.981645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [210.981920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [210.982196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [210.982473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [210.982765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:425] 3840x2400 format = XR24 little-endian (0x34325258) modifier = 0x100000000000009, visible: yes

<7> [210.983047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [210.983324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 3840.000000x2400.000000+0.000000+0.000000 dst: 3840x2400+0+0

<7> [210.983619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [210.983899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [210.984176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [210.984454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [210.984749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [210.985851] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [210.986165] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [210.986607] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [210.986969] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x28000000)

<7> [210.987280] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 307200 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 1

<7> [210.987611] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [210.987857] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=768

<7> [210.988141] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:388:DDI A/PHY A]

<7> [210.988371] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:397:DDI B/PHY B]

<7> [210.988606] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:406:DDI TC1/PHY TC1]

<7> [210.988827] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DP-MST A]

<7> [210.989046] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:409:DP-MST B]

<7> [210.989263] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST C]

<7> [210.989480] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DDI TC2/PHY TC2]

<7> [210.989719] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST A]

<7> [210.989936] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST B]

<7> [210.990151] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST C]

<7> [210.990401] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [210.990782] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [210.990989] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [210.991249] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [210.992629] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [210.992959] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [210.994961] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 turn panel power on

<7> [210.995209] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power cycle (442 ms remaining)

<7> [211.439849] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [211.447744] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [211.447767] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [211.488266] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [211.488832] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 wait for panel power on

<7> [211.489223] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [211.574615] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010

<7> [211.574996] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:388:DDI A/PHY A] - long

<7> [211.575306] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [211.575937] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:388:DDI A/PHY A]

<7> [211.696325] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [211.696886] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 turning VDD on

<7> [211.697243] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:388:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [211.699383] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 41 00 00 01 c0 02 00 02 00 00 0b 80

<7> [211.700758] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [211.701503] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07

<7> [211.702604] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [211.703717] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [211.704753] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Clock recovery OK

<7> [211.705071] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] 8.1 Gbps link rate without sink TPS4 support

<7> [211.705386] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Using DP training pattern TPS3

<7> [211.706929] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [211.707349] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:389:eDP-1][ENCODER:388:DDI A/PHY A][DPRX] Link Training passed at link rate = 810000, lane count = 4

<7> [211.708165] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [211.708687] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [211.709040] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [211.709442] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:389:eDP-1] Performing OUI wait (0 ms)

<7> [211.710061] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:389:eDP-1] set backlight PWM = 13818

<7> [211.725685] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [211.727603] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:389:eDP-1]

<7> [211.728044] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [211.748750] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [211.749305] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [211.749884] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [212.011177] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [212.011765] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [212.059753] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [212.060369] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [212.060999] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [212.194683] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [212.195343] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [212.226770] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [212.227476] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [212.228198] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [212.361266] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [212.361977] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [212.393781] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [212.394493] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [212.395227] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [212.528138] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [212.528838] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [212.559772] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [212.560474] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [212.561184] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [212.692759] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:426] from all active usage due to RMFB ioctl

<7> [212.692952] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:34:plane 1A] because [FB:426] is removed

<7> [212.693128] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4015) -> ( 0 - 0), size 4015 -> 0

<7> [212.693739] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [212.694129] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 4, 24, 24, 24, 24, 24, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [212.694488] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 120, 720, 720, 720, 720, 720, 0, 0, 255, 120, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [212.694858] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 241, 841, 841, 841, 841, 841, 0, 0, 256, 241, 256 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [212.695268] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [212.695864] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 11765 required 0 qgv_peak_bw: 19200

<7> [212.696400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 18130 required 0 qgv_peak_bw: 19200

<7> [212.696950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 21065 required 0 qgv_peak_bw: 19200

<7> [212.697468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 22000 required 0 qgv_peak_bw: 19200

<7> [212.698019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 19200 for required data rate: 0

<7> [212.701847] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [212.702450] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [212.704647] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [212.736215] [IGT] kms_flip: finished subtest A-eDP1, SUCCESS

Results for igt@kms_flip@basic-flip-vs-wf_vblank@a-edp1