Results for igt@xe_module_load@load

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

Detail	Value
Duration	7.14 seconds
Igt-Version	IGT-Version: 2.3-g4987fcaab (x86_64) (Linux: 6.19.0-lgci-xe-xe-4577-157c1f59af33fb9ac-debug+ x86_64)
Out	Using IGT_SRANDOM=1771560248 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (7.138s)
Err	Starting subtest: load Subtest load: SUCCESS (7.138s)
Dmesg	<6> [120.949672] [IGT] xe_module_load: executing <4> [120.949743] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <6> [120.954356] [IGT] xe_module_load: starting subtest load <5> [121.256454] Setting dangerous option force_probe - tainting kernel <6> [121.259270] xe 0000:00:02.0: vgaarb: deactivate vga console <7> [121.260379] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [121.260803] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [121.260812] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [121.260950] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7> [121.261079] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [121.263032] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [121.263182] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [121.263295] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [121.263411] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [121.263529] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [121.263627] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [121.263726] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [121.263836] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [121.263932] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [121.264043] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [121.264139] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [121.264246] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [121.264347] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [121.264446] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [121.264549] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [121.264663] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [121.264783] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [121.264903] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [121.265018] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [121.265133] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [121.265247] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [121.265361] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [121.265468] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [121.265570] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [121.265677] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [121.265797] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [121.265923] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [121.266056] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [121.266189] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [121.266296] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [121.266393] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [121.266494] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [121.266596] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [121.266697] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [121.266805] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [121.266924] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [121.267040] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [121.267148] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [121.267244] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [121.267341] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [121.267437] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [121.267529] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [121.267621] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [121.268036] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [121.268174] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [121.268306] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [121.268413] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [121.268519] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [121.268630] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [121.268738] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 850) <7> [121.268867] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [121.268982] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [121.269107] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [121.269239] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [121.269355] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [121.269450] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [121.269538] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [121.269632] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [121.269722] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [121.269858] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [121.269987] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [121.270108] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [121.270209] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [121.270308] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [121.270405] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [121.270497] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [121.270588] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [121.270673] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [121.270764] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [121.270890] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [121.271050] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [121.271224] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [121.271368] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3 <7> [121.271806] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [121.272013] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [121.272168] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [121.272288] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [121.272412] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [121.272555] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [121.272666] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [121.272802] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [121.272942] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [121.273094] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [121.273216] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [121.273349] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [121.273466] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [121.273707] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000) <7> [121.273808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [121.274246] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [121.275217] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [121.275350] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [121.275447] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [121.275536] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [121.275623] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [121.275715] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [121.275816] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [121.275932] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [121.276041] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [121.276134] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [121.276220] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [121.276305] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [121.276383] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [121.276457] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [121.278904] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [121.279060] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [121.279192] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [121.279313] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [121.279433] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [121.279552] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [121.279671] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [121.279798] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [121.279927] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [121.280054] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [121.280181] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [121.280304] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [121.280427] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [121.280552] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [121.280676] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [121.280816] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [121.280934] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [121.281053] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [121.281169] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [121.281282] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [121.281396] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [121.281516] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [121.281643] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [121.281761] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [121.281897] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [121.282014] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [121.282128] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [121.282241] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [121.282355] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [121.282466] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [121.287138] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7> [121.292012] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3 <7> [121.292175] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [121.292312] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [121.292482] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:391:DDI A/PHY A] Using AUX CH A (VBT) <6> [121.292625] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [121.292648] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:391:DDI A/PHY A] <7> [121.292848] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [121.293000] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [121.293152] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [121.293304] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [121.293448] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [121.293592] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [121.293731] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [121.293942] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [121.294078] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [121.294238] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:391:DDI A/PHY A] initial power sequencer: PPS 0 <7> [121.294410] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [121.294540] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [121.294648] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [121.294753] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [121.294885] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [121.295047] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [121.295177] xe 0000:00:02.0: [drm:pps_vdd_init [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 VDD left on by BIOS, adjusting state tracking <7> [121.295297] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [121.360783] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.425801] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.488792] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.551786] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.615787] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.680791] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.745789] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.809790] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.873793] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.936792] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [121.998794] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.063794] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.126794] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.187795] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.250797] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.314798] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.376799] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.439798] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.504800] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.567800] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.631802] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.695803] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.760804] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.820807] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.880806] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [122.940805] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.000808] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.060807] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.120808] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.180808] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.240810] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.300809] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.300932] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <7> [123.360812] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.420811] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.484814] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.544813] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.604814] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.664816] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.724815] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.784816] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.844817] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.904817] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [123.964820] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.024818] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.084819] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.144820] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.204822] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.264822] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.324822] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.384823] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.444824] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.504828] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.564825] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.624826] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.684826] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.744827] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.804836] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.864830] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.924829] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [124.984830] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.044831] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.104832] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.164832] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.224832] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.224958] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <7> [125.284833] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.344839] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.404835] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.464835] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.524835] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.584836] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.644837] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.704837] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.764838] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.824839] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.884840] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [125.944840] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.004841] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.064842] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.124843] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.184844] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.244844] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.304844] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.364845] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.424845] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.484845] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.544846] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.604847] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.664848] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.724848] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.784849] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.844849] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.904849] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [126.964850] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [127.024851] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [127.084851] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [127.144852] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX A/DDI A/PHY A: timeout (status 0x7d4c023f) <7> [127.144974] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX A/DDI A/PHY A: Too many retries, giving up. First error: -110 <6> [127.144991] xe 0000:00:02.0: [drm] [ENCODER:391:DDI A/PHY A] failed to retrieve link info, disabling eDP <7> [127.145004] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD off <7> [127.145163] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [127.145283] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [127.145833] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:391:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [127.146090] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [127.146271] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:391:DDI TC1/PHY TC1] <7> [127.146869] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:404:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [127.147039] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [127.147193] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:404:DDI TC2/PHY TC2] <7> [127.147550] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:412:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [127.147711] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [127.147872] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:412:DDI TC3/PHY TC3] <7> [127.148511] xe 0000:00:02.0: [drm:intel_vga_disable [xe]] VGA plane is disabled <6> [127.148657] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem <7> [127.148998] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: disabled <7> [127.149148] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] hw state readout: disabled <7> [127.149289] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] hw state readout: disabled <7> [127.149398] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A <7> [127.149504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A <7> [127.149609] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A <7> [127.149712] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A <7> [127.149815] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A <7> [127.149930] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A <7> [127.150033] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] hw state readout: disabled, pipe B <7> [127.150142] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] hw state readout: disabled, pipe B <7> [127.150245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] hw state readout: disabled, pipe B <7> [127.150346] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] hw state readout: disabled, pipe B <7> [127.150447] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] hw state readout: disabled, pipe B <7> [127.150549] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] hw state readout: disabled, pipe B <7> [127.150651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] hw state readout: disabled, pipe C <7> [127.150756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] hw state readout: disabled, pipe C <7> [127.150877] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] hw state readout: disabled, pipe C <7> [127.150982] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] hw state readout: disabled, pipe C <7> [127.151085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] hw state readout: disabled, pipe C <7> [127.151188] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] hw state readout: disabled, pipe C <7> [127.151299] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [127.151414] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:391:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [127.151524] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:393:DP-MST A] hw state readout: disabled, pipe A <7> [127.151629] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:394:DP-MST B] hw state readout: disabled, pipe B <7> [127.151732] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:395:DP-MST C] hw state readout: disabled, pipe C <7> [127.151836] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [127.151950] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:404:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [127.152057] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:406:DP-MST A] hw state readout: disabled, pipe A <7> [127.152161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:407:DP-MST B] hw state readout: disabled, pipe B <7> [127.152263] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:408:DP-MST C] hw state readout: disabled, pipe C <7> [127.152367] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [127.152469] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [127.152571] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST A] hw state readout: disabled, pipe A <7> [127.152670] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST B] hw state readout: disabled, pipe B <7> [127.152768] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DP-MST C] hw state readout: disabled, pipe C <7> [127.152874] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [127.152998] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [127.153120] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [127.153241] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [127.153361] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [127.153481] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [127.153595] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [127.153731] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:392:DP-1] hw state readout: disabled <7> [127.153854] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:405:DP-2] hw state readout: disabled <7> [127.153962] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:413:DP-3] hw state readout: disabled <7> [127.154064] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 0 kHz <7> [127.154164] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz <7> [127.154264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz <7> [127.154364] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz <7> [127.154464] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz <7> [127.154561] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz <7> [127.154659] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 0 kHz <7> [127.154756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:153:plane 1B] min_cdclk 0 kHz <7> [127.154879] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:183:plane 2B] min_cdclk 0 kHz <7> [127.154977] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:213:plane 3B] min_cdclk 0 kHz <7> [127.155075] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:243:plane 4B] min_cdclk 0 kHz <7> [127.155171] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:253:plane 5B] min_cdclk 0 kHz <7> [127.155267] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:263:cursor B] min_cdclk 0 kHz <7> [127.155363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:269:pipe B] min_cdclk 0 kHz <7> [127.155460] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:272:plane 1C] min_cdclk 0 kHz <7> [127.155556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:302:plane 2C] min_cdclk 0 kHz <7> [127.155653] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:332:plane 3C] min_cdclk 0 kHz <7> [127.155750] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:362:plane 4C] min_cdclk 0 kHz <7> [127.155853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:372:plane 5C] min_cdclk 0 kHz <7> [127.155949] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:382:cursor C] min_cdclk 0 kHz <7> [127.156046] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:388:pipe C] min_cdclk 0 kHz <7> [127.156148] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [127.156253] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:269:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [127.156355] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:388:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [127.156453] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [127.156598] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [127.156738] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [127.156927] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [127.157168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [setup_hw_state] <7> [127.157314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [setup_hw_state] <7> [127.157447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [setup_hw_state] <7> [127.157579] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [127.163481] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7> [127.168161] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004553f7 <7> [127.168338] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [127.168441] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [127.168533] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [127.168620] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad4 <7> [127.168704] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [127.168787] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [127.168889] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [127.168971] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [127.169053] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [127.169134] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [127.169215] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [127.169296] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [127.169378] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [127.169461] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [127.169609] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [127.180907] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [127.182073] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [127.182364] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,0000007f <7> [127.182473] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,0000007f <7> [127.182572] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [127.182665] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [127.182762] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [127.823024] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [127.823031] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [127.823033] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [127.823268] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [127.823430] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access <7> [127.823568] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access <7> [127.823690] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [127.823800] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [127.823921] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [127.824087] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [127.824436] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [127.824644] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [127.824747] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [127.824870] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [127.824980] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [127.826093] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [127.826193] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [127.826298] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [127.826390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [127.826474] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [127.826558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [127.826640] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [127.826721] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [127.826807] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [127.826903] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [127.826989] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [127.827091] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [127.827189] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [127.827273] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [127.827356] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [127.827438] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [127.827515] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [127.827590] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [127.827664] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [127.827738] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [127.827811] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [127.827900] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [127.827979] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [127.828062] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [127.828143] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [127.828226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [127.828317] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [127.828404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [127.828486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [127.828570] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210 <7> [127.828650] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8 <7> [127.828729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc <7> [127.828808] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01 <7> [127.828897] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c <7> [127.828981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [127.829070] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [127.829160] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [127.829243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [127.829326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [127.829414] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [127.829499] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [127.829581] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [127.829979] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [127.830074] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [127.830164] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [127.830248] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [127.830556] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [127.830632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [127.830706] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [127.830780] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [127.831243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [127.831321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [127.831404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [127.831488] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [127.831570] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [127.831649] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [127.831730] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [127.832295] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [127.832444] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004553f7 <7> [127.832533] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [127.832620] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [127.832706] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [127.832790] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad4 <7> [127.832889] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [127.832973] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [127.833054] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [127.833138] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [127.833214] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [127.833289] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [127.833361] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [127.833432] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [127.833502] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [127.833590] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [127.833866] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [127.835101] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe1b000 for xe_guc_buf_cache_init_with_size [xe] <7> [127.837985] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [127.854248] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152) <7> [127.865176] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [127.865500] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [127.866534] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4144 dwords <7> [127.866679] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [127.866778] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [127.866878] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [127.866965] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [127.867048] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [127.867136] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [127.867225] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [127.867311] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 (MCR) <7> [127.870666] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [127.870792] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [127.870917] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [127.873006] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [127.873120] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [127.877976] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.58.0 <7> [127.882662] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef93f7 <7> [127.882905] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [127.883087] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [127.883256] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [127.883419] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000201c <7> [127.883573] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [127.883745] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [127.883927] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [127.884068] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [127.884205] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [127.884358] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [127.884507] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [127.884651] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [127.884782] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [127.886317] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [127.889550] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [127.890968] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [127.891172] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [127.891430] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [127.912974] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [127.913501] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [127.913795] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000 <7> [127.914071] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000 <7> [127.914296] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [127.914536] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [127.914741] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [127.914978] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [127.914982] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [127.914985] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [127.914987] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [127.914989] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [127.914991] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [127.914993] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [127.914996] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [127.914998] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [127.915001] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [127.915275] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [127.915585] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [127.915919] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [127.916243] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [127.916550] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [127.916843] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [127.917170] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [127.917454] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [127.917729] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [127.918026] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [127.918504] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [127.918768] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [127.919061] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [127.919368] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [127.919630] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [127.919884] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [127.920132] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [127.920388] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [127.920678] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [127.920954] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [127.921260] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [127.922892] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [127.923091] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [127.923292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [127.923481] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [127.923657] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [127.923832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [127.924027] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [127.924189] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002 <7> [127.924346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [127.924492] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [127.924632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [127.924773] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [127.924943] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [127.925095] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [127.925245] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [127.925387] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [127.925524] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [127.925657] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [127.925787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [127.925929] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [127.926051] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [127.926168] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [127.926283] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [127.926394] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [127.926503] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [127.926610] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [127.926715] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [127.926819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [127.926936] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [127.927038] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [127.927155] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [127.927271] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [127.927381] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [127.927485] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [127.927588] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [127.927688] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [127.927785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [127.927885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [127.927981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [127.928071] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [127.928159] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [127.928603] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [127.928706] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [127.928801] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [127.928904] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [127.928994] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [127.929077] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [127.929157] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [127.929236] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [127.929315] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [127.929391] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [127.929463] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [127.929535] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [127.930214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [127.930299] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [127.930379] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [127.930920] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [127.931054] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef93f7 <7> [127.931137] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [127.931216] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [127.931293] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [127.931369] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000201c <7> [127.931444] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [127.931519] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [127.931592] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [127.931666] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [127.931741] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [127.931815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [127.931899] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [127.931983] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [127.932060] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [127.932147] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [127.932251] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [127.934121] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a88000 for xe_guc_buf_cache_init_with_size [xe] <7> [127.953757] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 49152) <7> [127.975173] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [127.975684] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [127.977082] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [127.977395] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [127.980244] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [127.980536] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [127.983879] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [127.984222] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [128.027893] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [128.028594] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [128.028951] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [128.029316] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [128.029653] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [128.030469] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [128.030810] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [128.031173] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [128.032668] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008 <7> [128.033056] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108 <7> [128.033394] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208 <7> [128.033720] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308 <7> [128.034066] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8 <7> [128.034382] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 0: start 0x98008 <7> [128.034690] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 1: start 0x98108 <7> [128.035021] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 2: start 0x98208 <7> [128.035323] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 3: start 0x98308 <7> [128.035621] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:269:pipe B] FQ 4: start 0x983c8 <7> [128.035979] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 0: start 0x52008 <7> [128.036274] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 1: start 0x52108 <7> [128.036566] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 2: start 0x52208 <7> [128.036863] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 3: start 0x52308 <7> [128.037164] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:388:pipe C] FQ 4: start 0x523c8 <7> [128.037845] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no <7> [128.038190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [128.038526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [128.038849] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [128.039228] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [128.039563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [128.039986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [fastset] <7> [128.040340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [fastset] <7> [128.040636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [fastset] <7> [128.041154] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d00071) <7> [128.041951] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [128.042373] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [128.042660] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7> [128.042926] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:388:pipe C] <7> [128.043172] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1803010 0x28d00071) <7> [128.053472] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:392:DP-1] adding connector to sysfs <7> [128.056030] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [128.059495] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:392:DP-1] generating connector hotplug event <7> [128.059615] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:405:DP-2] adding connector to sysfs <7> [128.060361] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [128.061454] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:405:DP-2] generating connector hotplug event <7> [128.061504] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:413:DP-3] adding connector to sysfs <7> [128.062090] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [128.062795] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:413:DP-3] generating connector hotplug event <6> [128.062825] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [128.062863] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 3 outputs detected <6> [128.071449] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [128.075040] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7> [128.076608] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [128.076692] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6> [128.076698] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7> [128.076779] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632 <7> [128.078267] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:150:pipe A] not active, skipping <7> [128.078395] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:269:pipe B] not active, skipping <7> [128.078515] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:388:pipe C] not active, skipping <7> [128.078634] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [128.078959] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:DP-1] <7> [128.079163] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [128.079336] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:392:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [128.079494] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:405:DP-2] <7> [128.079678] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [128.079860] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [128.079815] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:405:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [128.080705] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-3] <7> [128.080870] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [128.081003] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:413:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [128.081134] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [128.081177] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:DP-1] <7> [128.081226] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:DP-1] <7> [128.081552] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:DP-1] disconnected <7> [128.081583] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:405:DP-2] <7> [128.081586] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:405:DP-2] <7> [128.081771] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:405:DP-2] disconnected <7> [128.081774] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-3] <7> [128.081776] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-3] <7> [128.081956] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-3] disconnected <7> [128.081959] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [128.081963] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:DP-1] enabled? no <7> [128.081965] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:405:DP-2] enabled? no <7> [128.081966] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-3] enabled? no <7> [128.082050] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [128.082063] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [128.082116] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [128.082127] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [128.082773] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [128.082758] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [128.082976] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:DP-1] <7> [128.082906] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [128.082982] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:392:DP-1] <7> [128.083055] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [128.083174] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:392:DP-1] disconnected <7> [128.083178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:405:DP-2] <7> [128.083180] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:405:DP-2] <7> [128.083199] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [128.083331] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:405:DP-2] disconnected <7> [128.083334] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-3] <7> [128.083328] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [128.083336] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:413:DP-3] <7> [128.083494] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:413:DP-3] disconnected <7> [128.083496] xe 0000:00:02.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes <7> [128.083499] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:392:DP-1] enabled? no <7> [128.083501] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:405:DP-2] enabled? no <7> [128.083503] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:413:DP-3] enabled? no <7> [128.083465] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [128.083560] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [128.083569] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [128.083603] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6> [128.083610] xe 0000:00:02.0: [drm] Cannot find any crtc or sizes <7> [128.083634] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [128.083601] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [128.083732] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [128.083857] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [128.083983] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [128.084108] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [128.084229] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [128.084333] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [128.084439] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [128.084565] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [128.084689] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [128.084806] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [128.084958] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [128.085082] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [128.085204] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [128.085324] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [128.085428] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [128.086173] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [128.086288] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [128.086404] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [128.086514] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000) <7> [128.086633] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [128.086739] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [128.086894] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [128.087027] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [128.087167] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [128.087274] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [128.087383] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [128.089394] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [128.090660] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6> [128.090665] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6> [128.092150] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [128.092337] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [128.092826] [IGT] xe_module_load: finished subtest load, SUCCESS <7> [128.092789] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6> [128.093064] [IGT] xe_module_load: exiting, ret=0 <7> [128.093197] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

Created at 2026-02-20 04:14:49