Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 1.31 seconds |
| Igt-Version |
IGT-Version: 2.3-g4987fcaab (x86_64) (Linux: 6.19.0-lgci-xe-xe-4577-157c1f59af33fb9ac-debug+ x86_64) |
| Out |
Using IGT_SRANDOM=1771560248 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (1.315s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (1.315s) |
| Dmesg |
<6> [129.081697] [IGT] xe_module_load: executing
<4> [129.081746] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [129.086724] [IGT] xe_module_load: starting subtest load
<6> [129.238556] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0
<4> [129.238562] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [129.238564] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [129.238566] nvme 0000:05:00.0: [ 0] RxErr (First)
<5> [129.426572] Setting dangerous option force_probe - tainting kernel
<6> [129.429995] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [129.431654] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<7> [129.431689] xe 0000:03:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [129.432767] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [129.432778] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [129.432888] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [129.432995] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [129.433097] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [129.436455] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000
<6> [129.436566] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [129.436568] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<6> [129.436570] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [129.436571] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<7> [129.436691] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [129.436835] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [129.436974] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [129.437299] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [129.437407] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [129.437513] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [129.437626] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [129.437733] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [129.437837] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [129.438156] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [129.438286] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [129.438400] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [129.438511] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [129.438826] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [129.439226] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [129.453145] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [129.453261] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [129.453369] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [129.453476] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [129.453582] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [129.453683] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [129.453784] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [129.453881] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [129.453989] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [129.454097] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [129.454195] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [129.454291] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [129.454388] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [129.454493] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [129.454594] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [129.454689] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [129.454783] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [129.454875] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [129.454995] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [129.455101] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [129.455199] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [129.455296] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [129.455391] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [129.455486] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [129.455578] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [129.455671] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [129.455764] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [129.455858] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [129.455963] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [129.456070] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [129.456405] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [129.456556] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [129.456897] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [129.457088] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [129.457484] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [129.457597] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.457912] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [129.458050] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [129.458371] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [129.458501] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [129.458612] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [129.458932] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [129.459036] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [129.459146] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [129.459246] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [129.459711] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [129.460389] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [129.461750] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [129.461884] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [129.462009] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [129.462115] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [129.462216] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [129.462289] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [129.462319] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [129.462430] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [129.462531] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [129.462629] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [129.462652] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [129.462727] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [129.462771] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [129.462825] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [129.462878] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [129.462930] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [129.462987] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [129.463032] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [129.463079] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [129.463128] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [129.463175] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [129.463233] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [129.463267] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [129.463335] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [129.463356] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [129.463434] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [129.463443] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [129.463528] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [129.463534] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [129.463612] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [129.463631] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [129.463700] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [129.463727] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [129.463796] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [129.463822] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [129.463888] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [129.463922] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [129.463987] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [129.464030] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [129.464076] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [129.464133] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [129.464162] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [129.464231] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [129.464328] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [129.464428] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [129.464523] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [129.464618] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [129.464718] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [129.469308] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<6> [129.475246] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [129.475709] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [129.475855] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [129.475981] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [129.476316] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:506:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [129.476458] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:506:DDI TC1/PHY F]
<7> [129.476999] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:506:DDI TC1/PHY F]
<7> [129.477126] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:506:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [129.477688] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [129.477831] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC2/PHY G]
<7> [129.478154] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:525:DDI TC2/PHY G]
<7> [129.478266] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:525:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [129.478669] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:537:DDI TC3/PHY H]
<7> [129.478768] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:537:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [129.479165] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [129.479295] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:541:DDI TC4/PHY I]
<7> [129.479583] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY I]
<7> [129.479697] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [129.480255] xe 0000:03:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [129.480417] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: disabled
<7> [129.480772] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled
<7> [129.480916] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] hw state readout: disabled
<7> [129.481253] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] hw state readout: disabled
<7> [129.481349] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A
<7> [129.481668] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A
<7> [129.481769] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A
<7> [129.481866] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A
<7> [129.482173] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A
<7> [129.482266] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A
<7> [129.482362] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B
<7> [129.482667] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B
<7> [129.482763] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B
<7> [129.482857] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B
<7> [129.483177] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B
<7> [129.483273] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B
<7> [129.483367] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C
<7> [129.483666] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C
<7> [129.483760] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C
<7> [129.483853] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C
<7> [129.484160] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C
<7> [129.484256] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] hw state readout: disabled, pipe C
<7> [129.484354] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D
<7> [129.484651] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D
<7> [129.484743] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D
<7> [129.484842] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D
<7> [129.485146] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D
<7> [129.485238] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] hw state readout: disabled, pipe D
<7> [129.485336] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:506:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [129.485429] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST A] hw state readout: disabled, pipe A
<7> [129.485519] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST B] hw state readout: disabled, pipe B
<7> [129.485609] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST C] hw state readout: disabled, pipe C
<7> [129.485698] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST D] hw state readout: disabled, pipe D
<7> [129.486003] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [129.486101] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A
<7> [129.486199] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B
<7> [129.486293] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C
<7> [129.486390] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D
<7> [129.486688] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [129.486782] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [129.486880] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST A] hw state readout: disabled, pipe A
<7> [129.486988] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST B] hw state readout: disabled, pipe B
<7> [129.487081] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST C] hw state readout: disabled, pipe C
<7> [129.487178] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST D] hw state readout: disabled, pipe D
<7> [129.487273] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [129.487392] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [129.487501] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [129.487810] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [129.487919] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [129.488017] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [129.488315] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [129.488425] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:507:DP-1] hw state readout: disabled
<7> [129.488541] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:520:HDMI-A-1] hw state readout: disabled
<7> [129.488852] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-2] hw state readout: disabled
<7> [129.488962] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:HDMI-A-2] hw state readout: disabled
<7> [129.489059] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:538:HDMI-A-3] hw state readout: disabled
<7> [129.489357] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:DP-3] hw state readout: disabled
<7> [129.489451] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:550:HDMI-A-4] hw state readout: disabled
<7> [129.489540] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 0 kHz
<7> [129.489631] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz
<7> [129.489730] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz
<7> [129.489825] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz
<7> [129.489921] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz
<7> [129.490012] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz
<7> [129.490109] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 0 kHz
<7> [129.490201] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz
<7> [129.490293] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz
<7> [129.490384] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz
<7> [129.490480] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz
<7> [129.490572] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz
<7> [129.490662] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz
<7> [129.490752] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz
<7> [129.490846] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] min_cdclk 0 kHz
<7> [129.491008] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] min_cdclk 0 kHz
<7> [129.491097] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] min_cdclk 0 kHz
<7> [129.491185] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] min_cdclk 0 kHz
<7> [129.491273] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] min_cdclk 0 kHz
<7> [129.491368] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] min_cdclk 0 kHz
<7> [129.491461] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] min_cdclk 0 kHz
<7> [129.491551] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] min_cdclk 0 kHz
<7> [129.491639] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] min_cdclk 0 kHz
<7> [129.491726] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] min_cdclk 0 kHz
<7> [129.491813] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] min_cdclk 0 kHz
<7> [129.491899] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] min_cdclk 0 kHz
<7> [129.491996] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] min_cdclk 0 kHz
<7> [129.492084] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] min_cdclk 0 kHz
<7> [129.492378] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [129.492487] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [129.492588] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [129.492681] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [129.492775] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [129.492899] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [129.493027] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [129.493138] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [129.493476] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [129.493662] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [setup_hw_state]
<7> [129.493779] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]
<7> [129.493887] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [setup_hw_state]
<7> [129.494003] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [setup_hw_state]
<7> [129.494106] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [129.499816] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [129.503065] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x006603f7
<7> [129.503169] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [129.503258] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [129.503342] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [129.503422] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000eea
<7> [129.503503] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [129.503585] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [129.503661] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [129.503737] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [129.503811] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [129.503883] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [129.503969] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [129.504045] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [129.504117] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [129.504190] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [129.504308] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [129.514918] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [129.515696] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [129.515950] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [129.516039] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [129.516121] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [129.516200] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [129.516277] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [129.600552] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [129.600554] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [129.600707] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [129.600810] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access
<7> [129.600917] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access
<7> [129.601031] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [129.601112] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [129.601195] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [129.601319] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [129.601436] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [129.601558] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [129.601635] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [129.601716] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [129.601792] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [129.601943] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [129.602038] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [129.602129] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [129.602208] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [129.603544] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [129.603634] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [129.603724] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [129.603808] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [129.603889] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [129.603988] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [129.604075] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [129.604159] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [129.604247] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [129.604325] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [129.604402] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [129.604478] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [129.604554] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [129.604633] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [129.604709] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [129.604781] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [129.604854] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [129.604945] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [129.605024] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [129.605101] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [129.605173] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [129.605242] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [129.605311] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [129.605381] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [129.605451] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [129.605520] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [129.605603] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [129.605684] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [129.605762] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [129.605844] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [129.605949] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [129.606072] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [129.606169] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [129.606256] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [129.606333] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [129.606411] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [129.606488] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [129.606564] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [129.606638] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [129.606718] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [129.606795] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [129.606872] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [129.606965] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [129.607286] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [129.607371] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [129.607452] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [129.607531] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [129.607847] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [129.607943] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [129.608025] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [129.608105] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [129.608409] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [129.608488] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [129.608565] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [129.608641] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [129.608718] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [129.608797] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [129.608880] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [129.609328] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [129.609450] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [129.609552] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [129.609645] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [129.609737] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [129.609824] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [129.609919] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [129.610629] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [129.614839] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x010823f7
<7> [129.614937] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [129.615029] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [129.615106] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [129.615184] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x0000232e
<7> [129.615261] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [129.615335] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [129.615405] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [129.615474] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [129.615542] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [129.615610] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [129.615678] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [129.615747] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [129.615814] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [129.615903] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [129.616103] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [129.617915] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [129.619580] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [129.620583] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [129.640707] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [129.651328] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [129.651651] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [129.652533] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [129.652671] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [129.652761] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [129.652847] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [129.652943] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [129.653026] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [129.653106] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [129.653185] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [129.653266] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [129.653349] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [129.655896] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [129.656004] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [129.656087] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [129.658161] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [129.658267] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [129.661737] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [129.663008] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [129.665111] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a1c3f7
<7> [129.665206] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [129.665291] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [129.665375] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [129.665454] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003662
<7> [129.665531] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [129.665605] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [129.665678] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [129.665752] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [129.665823] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [129.665895] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [129.665982] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [129.666054] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [129.666125] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [129.667563] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [129.668036] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [129.668168] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [129.678923] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [129.679443] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [129.679687] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [129.679907] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [129.680154] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [129.680353] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [129.680542] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [129.680734] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [129.680737] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [129.680740] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [129.680742] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [129.680744] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [129.680747] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [129.680749] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [129.680752] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [129.680756] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [129.681217] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [129.681457] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [129.681686] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [129.681896] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [129.682146] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [129.682341] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [129.682534] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [129.682722] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [129.682893] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [129.683092] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [129.683453] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [129.683631] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [129.683804] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [129.683969] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [129.684125] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [129.684272] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [129.684420] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [129.684571] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [129.684720] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [129.684864] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [129.685176] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [129.685306] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [129.685443] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [129.685571] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [129.685697] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [129.685819] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [129.685945] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [129.686063] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [129.686182] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [129.686306] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [129.686552] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [129.686667] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [129.686788] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [129.686919] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [129.687043] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [129.687155] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [129.687261] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [129.687368] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [129.687471] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [129.687580] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [129.688973] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [129.689072] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [129.689165] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [129.689258] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [129.689344] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [129.689430] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [129.689512] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [129.689594] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [129.689687] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [129.689772] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [129.689853] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [129.689954] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [129.690033] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [129.690109] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [129.690185] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [129.690261] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [129.690336] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [129.690412] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [129.690490] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [129.690570] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [129.690646] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [129.690720] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [129.690797] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [129.690877] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [129.690965] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [129.691041] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [129.691138] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [129.691232] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [129.691318] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [129.691399] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [129.691482] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [129.691568] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [129.691650] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [129.691729] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [129.691806] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [129.691886] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [129.691979] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [129.692186] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [129.692267] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [129.692352] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [129.692436] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [129.692514] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [129.692591] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [129.692667] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [129.692745] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [129.692829] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [129.692915] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [129.692996] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [129.693075] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [129.693272] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [129.693352] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [129.693430] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [129.693510] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [129.693586] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [129.693661] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [129.693736] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [129.693813] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [129.693896] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [129.693989] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [129.694068] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [129.694146] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [129.694349] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [129.694429] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [129.694508] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [129.694589] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [129.694670] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [129.694750] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [129.694826] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [129.694902] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [129.694991] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [129.695067] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [129.695142] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [129.695215] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [129.695664] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [129.698478] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024453f7
<7> [129.698577] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [129.698664] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [129.698745] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [129.698823] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004ab4
<7> [129.698903] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [129.699001] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [129.699077] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [129.699149] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [129.699223] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [129.699295] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [129.699367] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [129.699439] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [129.699511] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [129.699606] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [129.699705] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [129.701068] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a1c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [129.720215] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [129.730923] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [129.731263] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [129.731724] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [129.731820] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [129.733274] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [129.733369] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [129.744919] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [129.745645] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [129.745814] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [129.745994] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [129.746144] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [129.747715] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [129.747844] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [129.748361] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [129.748435] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [129.748580] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [129.748693] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [129.748790] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [129.749418] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008
<7> [129.749561] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108
<7> [129.749683] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208
<7> [129.749794] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308
<7> [129.749901] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8
<7> [129.750037] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008
<7> [129.750134] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108
<7> [129.750228] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208
<7> [129.750322] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308
<7> [129.750414] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8
<7> [129.750505] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 0: start 0x52008
<7> [129.750597] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 1: start 0x52108
<7> [129.750695] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 2: start 0x52208
<7> [129.750793] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 3: start 0x52308
<7> [129.750894] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 4: start 0x523c8
<7> [129.751012] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 0: start 0x59008
<7> [129.751136] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 1: start 0x59108
<7> [129.751259] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 2: start 0x59208
<7> [129.751359] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 3: start 0x59308
<7> [129.751451] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 4: start 0x593c8
<7> [129.751725] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [129.751878] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [129.752017] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [129.752133] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [129.752277] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [fastset]
<7> [129.752399] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]
<7> [129.752517] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [fastset]
<7> [129.752624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [fastset]
<7> [129.753404] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [129.753634] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [129.754195] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [129.754441] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [129.754591] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [129.754842] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [129.755112] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [129.755104] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [129.755645] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<5> [129.757608] Creating 4 MTD partitions on "xe.nvm.768":
<5> [129.757645] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [129.760423] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:DP-1] adding connector to sysfs
<7> [129.762190] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [129.765175] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:DP-1] generating connector hotplug event
<7> [129.765243] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:520:HDMI-A-1] adding connector to sysfs
<7> [129.765953] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:520:HDMI-A-1] generating connector hotplug event
<7> [129.766110] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-2] adding connector to sysfs
<7> [129.767170] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<5> [129.767818] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [129.767951] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-2] generating connector hotplug event
<7> [129.767991] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:HDMI-A-2] adding connector to sysfs
<7> [129.768291] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:HDMI-A-2] generating connector hotplug event
<7> [129.768333] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:538:HDMI-A-3] adding connector to sysfs
<7> [129.769635] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:538:HDMI-A-3] generating connector hotplug event
<7> [129.769748] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:DP-3] adding connector to sysfs
<7> [129.771334] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [129.773591] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:DP-3] generating connector hotplug event
<7> [129.773667] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:550:HDMI-A-4] adding connector to sysfs
<7> [129.774220] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:550:HDMI-A-4] generating connector hotplug event
<5> [129.776243] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<6> [129.777405] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [129.777846] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [129.778554] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [129.780094] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [129.780670] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<5> [129.784797] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<6> [129.785926] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [129.786033] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [129.786179] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [129.787668] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [129.788570] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:150:pipe A] not active, skipping
<7> [129.788832] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping
<7> [129.789060] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:386:pipe C] not active, skipping
<7> [129.789270] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:504:pipe D] not active, skipping
<7> [129.789475] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [129.790099] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [129.792189] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [129.792241] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:507:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [129.792384] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [129.796677] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:520:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [129.797687] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [129.802503] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [129.802952] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [129.807485] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [129.807854] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [129.812295] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:538:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [129.812653] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [129.817159] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [129.817473] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [129.821795] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:550:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [129.822276] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [129.822368] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [129.822428] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [129.826703] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [129.826756] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [129.826761] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [129.831399] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [129.831407] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [129.831410] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [129.835557] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [129.835562] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [129.835565] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [129.839919] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [129.839924] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [129.839927] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [129.844151] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] disconnected
<7> [129.844154] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [129.844157] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [129.848726] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [129.848735] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [129.848741] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [129.850934] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [129.853007] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [129.853013] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [129.853022] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-1] enabled? no
<7> [129.853026] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-1] enabled? no
<7> [129.853029] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [129.853032] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-2] enabled? no
<7> [129.853035] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-3] enabled? no
<7> [129.853038] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [129.853041] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-4] enabled? no
<7> [129.853167] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [129.853184] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [129.853260] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [129.853288] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<6> [129.853289] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [129.854236] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [129.854546] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [129.854983] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [129.854958] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [129.855093] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [129.855164] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [129.855171] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [129.855206] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [129.855313] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [129.855417] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [129.855519] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [129.855621] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [129.855723] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [129.855823] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [129.855935] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [129.856045] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [129.856141] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [129.856239] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [129.856340] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [129.856449] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [129.856554] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [129.856655] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [129.856756] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [129.856856] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [129.856977] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [129.857099] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [129.857207] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<3> [129.859023] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [129.859038] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<7> [129.859018] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [129.859200] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<7> [129.859307] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [129.859306] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x02000000)
<7> [129.859634] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [129.859929] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [129.860238] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [129.860521] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [129.861106] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [129.861345] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [129.861608] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [129.861646] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [129.861651] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [129.865948] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [129.865955] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [129.865959] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [129.870195] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [129.870199] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [129.870201] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<6> [129.874097] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [129.874329] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [129.874333] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [129.874336] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [129.874654] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [129.874833] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [129.874946] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [129.875339] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [129.875376] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [129.875637] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [129.875827] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [129.878468] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] disconnected
<7> [129.878473] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [129.878476] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [129.879098] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [129.882612] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [129.882618] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [129.882621] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [129.884544] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [129.885114] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [129.886545] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode
<7> [129.886591] xe 0000:0a:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<7> [129.886881] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [129.886882] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [129.886888] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [129.886896] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-1] enabled? no
<7> [129.886900] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-1] enabled? no
<7> [129.886903] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [129.886906] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-2] enabled? no
<7> [129.886909] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-3] enabled? no
<7> [129.886925] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [129.886928] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-4] enabled? no
<7> [129.887036] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [129.887186] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [129.887418] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [129.887492] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [129.887526] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [129.888109] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [129.888122] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [129.888274] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [129.888411] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [129.888559] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [129.892744] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [129.892841] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [129.892843] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [129.892845] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [129.892846] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [129.892995] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [129.893144] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [129.893269] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [129.893594] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [129.893703] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [129.893815] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [129.893937] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [129.894047] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [129.894166] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [129.894248] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [129.894496] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [129.894694] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [129.894854] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [129.894985] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [129.895289] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [129.895676] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [129.911853] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [129.911997] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [129.912275] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [129.912383] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [129.912487] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [129.912589] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [129.912690] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [129.912790] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [129.912886] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [129.913007] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [129.913137] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [129.913271] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [129.913371] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [129.913470] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [129.913568] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [129.913662] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [129.913756] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [129.913849] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [129.913957] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [129.914063] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [129.914163] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [129.914261] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [129.914356] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [129.914454] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [129.914556] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [129.914667] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [129.914765] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [129.914859] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [129.914964] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [129.915062] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [129.915389] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [129.915378] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [129.915532] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [129.915602] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [129.915741] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [129.915856] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [129.915873] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [129.915985] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [129.916087] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [129.916185] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [129.916282] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [129.916383] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [129.916483] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [129.916580] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [129.916675] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [129.916775] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [129.916874] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [129.916984] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [129.917078] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [129.917171] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [129.917264] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [129.917354] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [129.917447] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [129.917538] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [129.917636] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [129.917730] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [129.917823] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [129.917931] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [129.918030] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [129.918125] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [129.918224] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [129.918320] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [129.918413] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [129.918509] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [129.918608] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [129.918703] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [129.918797] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [129.918888] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [129.918992] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [129.919549] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [129.923179] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4
<6> [129.924671] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5
<6> [129.926546] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6
<6> [129.928666] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7
<7> [129.929139] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [129.929732] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [129.929992] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.930434] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [129.930785] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [129.931241] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [129.931478] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [129.931690] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [129.932122] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [129.932324] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [129.932732] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [129.932934] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [129.933381] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [129.934625] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [129.935595] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [129.935874] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [129.936244] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [129.936497] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [129.936509] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [129.936766] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [129.936891] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [129.937034] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [129.937115] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [129.937265] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [129.937293] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [129.937415] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [129.937565] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [129.937535] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [129.937708] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [129.937774] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [129.937845] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [129.937981] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [129.938021] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [129.938098] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [129.938205] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [129.938312] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [129.938256] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [129.938412] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [129.938512] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [129.938485] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [129.938620] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [129.938726] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [129.938714] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [129.938828] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [129.938947] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [129.938952] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [129.939193] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [129.939423] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [129.939650] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [129.939878] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [129.940159] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [129.940391] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [129.940625] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [129.940857] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [129.941109] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [129.941342] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [129.941574] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [129.941800] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [129.942060] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [129.942288] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [129.942511] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [129.942733] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [129.944914] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [129.952092] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [129.952237] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [129.952352] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [129.952590] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:506:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [129.953100] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:506:DDI TC1/PHY F]
<6> [129.953348] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [129.953648] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:506:DDI TC1/PHY F]
<7> [129.953772] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:506:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [129.954297] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [129.954437] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC2/PHY G]
<7> [129.954735] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:525:DDI TC2/PHY G]
<7> [129.954849] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:525:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [129.955274] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:537:DDI TC3/PHY H]
<7> [129.955380] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:537:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [129.955758] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [129.955900] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:541:DDI TC4/PHY I]
<7> [129.956255] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY I]
<7> [129.956371] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [129.956814] xe 0000:0a:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [129.957036] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: disabled
<7> [129.957389] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled
<7> [129.957542] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] hw state readout: disabled
<7> [129.957880] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] hw state readout: disabled
<7> [129.957999] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A
<7> [129.958292] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A
<7> [129.958394] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A
<7> [129.958503] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A
<7> [129.958804] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A
<7> [129.958907] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A
<7> [129.959021] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B
<7> [129.959313] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B
<7> [129.959412] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B
<7> [129.959510] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B
<7> [129.959797] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B
<7> [129.959895] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B
<7> [129.960004] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C
<7> [129.960293] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C
<7> [129.960392] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C
<7> [129.960489] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C
<7> [129.960784] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C
<7> [129.960889] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] hw state readout: disabled, pipe C
<7> [129.961004] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D
<7> [129.961290] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D
<7> [129.961388] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D
<7> [129.961490] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D
<7> [129.961781] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D
<7> [129.961883] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] hw state readout: disabled, pipe D
<7> [129.961995] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:506:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [129.962085] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST A] hw state readout: disabled, pipe A
<7> [129.962172] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST B] hw state readout: disabled, pipe B
<7> [129.962264] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST C] hw state readout: disabled, pipe C
<7> [129.962362] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST D] hw state readout: disabled, pipe D
<7> [129.962657] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [129.962754] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A
<7> [129.962847] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B
<7> [129.962944] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C
<7> [129.963033] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D
<7> [129.963325] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [129.963429] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [129.963523] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST A] hw state readout: disabled, pipe A
<7> [129.963613] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST B] hw state readout: disabled, pipe B
<7> [129.963702] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST C] hw state readout: disabled, pipe C
<7> [129.963789] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST D] hw state readout: disabled, pipe D
<7> [129.963878] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [129.964001] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [129.964110] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [129.964418] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [129.964533] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [129.964642] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [129.964944] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [129.965061] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:507:DP-4] hw state readout: disabled
<7> [129.965384] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:520:HDMI-A-5] hw state readout: disabled
<7> [129.965691] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-5] hw state readout: disabled
<7> [129.965800] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:HDMI-A-6] hw state readout: disabled
<7> [129.965907] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:538:HDMI-A-7] hw state readout: disabled
<7> [129.966266] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:DP-6] hw state readout: disabled
<7> [129.966408] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:550:HDMI-A-8] hw state readout: disabled
<7> [129.966507] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 0 kHz
<7> [129.966601] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz
<7> [129.966691] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz
<7> [129.966789] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz
<7> [129.966887] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz
<7> [129.966990] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz
<7> [129.967080] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 0 kHz
<7> [129.967169] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz
<7> [129.967267] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz
<7> [129.967362] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz
<7> [129.967459] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz
<7> [129.967554] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz
<7> [129.967644] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz
<7> [129.967733] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz
<7> [129.967822] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] min_cdclk 0 kHz
<7> [129.967917] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] min_cdclk 0 kHz
<7> [129.968006] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] min_cdclk 0 kHz
<7> [129.968097] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] min_cdclk 0 kHz
<7> [129.968194] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] min_cdclk 0 kHz
<7> [129.968287] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] min_cdclk 0 kHz
<7> [129.968376] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] min_cdclk 0 kHz
<7> [129.968469] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] min_cdclk 0 kHz
<7> [129.968565] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] min_cdclk 0 kHz
<7> [129.968657] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] min_cdclk 0 kHz
<7> [129.968744] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] min_cdclk 0 kHz
<7> [129.968830] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] min_cdclk 0 kHz
<7> [129.968924] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] min_cdclk 0 kHz
<7> [129.969014] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] min_cdclk 0 kHz
<7> [129.969305] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [129.969410] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [129.969509] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [129.969609] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [129.969701] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [129.969826] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [129.969948] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [129.970059] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [129.970381] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [129.970543] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [setup_hw_state]
<7> [129.970656] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]
<7> [129.970760] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [setup_hw_state]
<7> [129.970863] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [setup_hw_state]
<7> [129.970974] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [129.974424] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [129.977671] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x006603f7
<7> [129.977781] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [129.977865] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [129.977960] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [129.978037] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000eea
<7> [129.978112] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [129.978187] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [129.978260] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [129.978331] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [129.978403] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [129.978476] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [129.978547] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [129.978618] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [129.978688] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [129.978760] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [129.978888] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [129.989982] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [129.990761] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [129.990897] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [129.991002] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [129.991087] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [129.991167] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [129.991245] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [130.083459] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [130.083461] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [130.083594] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [130.083706] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access
<7> [130.083811] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access
<7> [130.083907] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [130.084016] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [130.084105] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<6> [130.084166] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0
<4> [130.084173] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
<4> [130.084174] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001000/00002000
<4> [130.084176] pcieport 0000:00:06.0: [12] Timeout
<7> [130.084233] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [130.084372] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [130.084509] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [130.084595] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [130.084688] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [130.084777] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [130.084922] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [130.085006] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [130.085092] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [130.085173] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<6> [130.086154] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0 (no details found
<6> [130.086159] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:00:06.0
<4> [130.086161] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
<4> [130.086162] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001100/00002000
<4> [130.086164] pcieport 0000:00:06.0: [ 8] Rollover
<4> [130.086165] pcieport 0000:00:06.0: [12] Timeout
<7> [130.086680] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [130.086785] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [130.086888] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [130.086995] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [130.087099] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [130.087193] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [130.087287] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [130.087379] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [130.087472] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [130.087559] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [130.087650] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [130.087737] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [130.087824] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [130.087911] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [130.088010] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [130.088095] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [130.088178] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [130.088262] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [130.088346] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [130.088429] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [130.088512] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [130.088595] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [130.088678] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [130.088762] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [130.088845] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [130.088938] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [130.089033] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [130.089124] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [130.089209] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [130.089295] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [130.089377] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [130.089457] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [130.089536] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [130.089615] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [130.089697] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [130.089785] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [130.089879] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [130.089981] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [130.090073] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [130.090168] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [130.090261] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [130.090354] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [130.090443] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [130.090800] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [130.090878] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [130.090972] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [130.091054] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [130.091416] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [130.091499] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [130.091578] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [130.091657] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [130.092013] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [130.092098] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [130.092180] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [130.092259] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [130.092338] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [130.092418] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [130.092501] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [130.092859] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [130.092952] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [130.093032] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [130.093110] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [130.093188] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [130.093264] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [130.093339] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [130.094033] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [130.098647] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x010823f7
<7> [130.098741] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [130.098824] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [130.098904] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [130.098997] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x0000232e
<7> [130.099075] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [130.099151] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [130.099230] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [130.099306] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [130.099381] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [130.099455] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [130.099528] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [130.099601] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [130.099674] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [130.099768] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [130.099868] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [130.102112] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [130.103286] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [130.105068] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [130.125741] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [130.136606] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [130.137010] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [130.137785] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [130.137884] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [130.137989] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [130.138070] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [130.138149] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [130.138228] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [130.138308] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [130.138385] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [130.138465] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [130.138547] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [130.140887] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [130.140993] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [130.141076] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [130.143226] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [130.143320] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [130.148159] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [130.149490] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [130.151574] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a1c3f7
<7> [130.151670] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [130.151756] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [130.151839] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [130.151927] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00003662
<7> [130.152014] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [130.152097] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [130.152177] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [130.152255] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [130.152331] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [130.152406] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [130.152482] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [130.152561] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [130.152639] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [130.153302] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [130.153763] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [130.153893] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [130.164937] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [130.165565] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [130.165818] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [130.166078] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [130.166305] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [130.166521] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [130.166729] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [130.166965] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [130.166969] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [130.166973] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [130.166976] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [130.166980] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [130.166983] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [130.166986] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [130.166989] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [130.167002] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [130.167548] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [130.167860] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [130.168235] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [130.168531] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [130.168822] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [130.169122] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [130.169396] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [130.169669] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [130.169940] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [130.170189] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [130.170686] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [130.170928] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [130.171156] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [130.171375] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [130.171586] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [130.171786] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [130.171997] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [130.172191] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [130.172370] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [130.172552] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [130.172949] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [130.173125] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [130.173316] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [130.173503] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [130.173682] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [130.173842] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [130.174030] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [130.174202] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [130.174363] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [130.174519] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [130.174826] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [130.175010] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [130.175167] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [130.175318] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [130.175473] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [130.175616] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [130.175753] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [130.175888] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [130.176033] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [130.176170] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [130.177667] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [130.177789] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [130.177907] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [130.178032] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [130.178143] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [130.178254] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [130.178363] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [130.178468] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [130.178577] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [130.178674] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [130.178767] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [130.178858] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [130.178954] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [130.179040] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [130.179125] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [130.179209] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [130.179293] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [130.179381] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [130.179468] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [130.179551] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [130.179628] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [130.179703] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [130.179777] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [130.179850] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [130.179932] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [130.180011] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [130.180104] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [130.180193] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [130.180280] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [130.180363] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [130.180444] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [130.180526] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [130.180605] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [130.180689] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [130.180772] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [130.180853] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [130.180933] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [130.181164] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [130.181245] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [130.181325] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [130.181405] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [130.181482] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [130.181561] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [130.181643] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [130.181722] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [130.181801] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [130.181879] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [130.181965] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [130.182049] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [130.182278] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [130.182360] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [130.182441] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [130.182519] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [130.182595] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [130.182678] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [130.182760] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [130.182838] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [130.182922] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [130.182999] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [130.183076] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [130.183158] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [130.183394] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [130.183484] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [130.183571] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [130.183654] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [130.183732] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [130.183809] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [130.183886] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [130.183974] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [130.184051] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [130.184133] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [130.184216] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [130.184296] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [130.184737] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [130.188406] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024453f7
<7> [130.188498] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [130.188579] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [130.188660] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [130.188739] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004ab4
<7> [130.188816] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [130.188889] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [130.188975] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [130.189052] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [130.189129] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [130.189203] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [130.189276] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [130.189348] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [130.189420] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [130.189513] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [130.189614] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [130.191072] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a1c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [130.211122] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [130.221943] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [130.222303] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [130.222760] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [130.222856] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [130.224969] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [130.225073] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [130.236929] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [130.237383] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [130.237579] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [130.237746] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [130.237907] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<5> [130.244770] Creating 4 MTD partitions on "xe.nvm.2560":
<5> [130.244786] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR"
<5> [130.253281] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC"
<5> [130.257839] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM"
<5> [130.263793] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM"
<7> [130.267970] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [130.270021] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [130.270185] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [130.270424] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [130.270474] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [130.270471] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [130.270597] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [130.270707] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [130.270838] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [130.271307] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008
<7> [130.271627] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108
<7> [130.271886] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208
<7> [130.272133] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308
<7> [130.272354] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8
<7> [130.272540] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008
<7> [130.272696] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108
<7> [130.272834] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208
<7> [130.272971] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308
<7> [130.273078] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8
<7> [130.273198] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 0: start 0x52008
<7> [130.273349] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 1: start 0x52108
<7> [130.273500] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 2: start 0x52208
<7> [130.273639] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 3: start 0x52308
<7> [130.273731] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 4: start 0x523c8
<7> [130.273822] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 0: start 0x59008
<7> [130.273953] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 1: start 0x59108
<7> [130.274062] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 2: start 0x59208
<7> [130.274162] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 3: start 0x59308
<7> [130.274250] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [130.274256] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 4: start 0x593c8
<7> [130.274545] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [130.274693] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [130.274846] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [130.275287] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [130.275613] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [fastset]
<7> [130.275814] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]
<7> [130.276022] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [fastset]
<7> [130.276202] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [fastset]
<7> [130.276830] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [130.277098] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [130.277432] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [130.277621] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [130.277783] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [130.278025] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [130.278272] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<6> [130.278619] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe])
<7> [130.279858] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [130.282637] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:DP-4] adding connector to sysfs
<7> [130.284166] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4
<7> [130.285313] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:DP-4] generating connector hotplug event
<7> [130.285366] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:520:HDMI-A-5] adding connector to sysfs
<7> [130.285688] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:520:HDMI-A-5] generating connector hotplug event
<7> [130.285733] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-5] adding connector to sysfs
<7> [130.286274] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5
<7> [130.287174] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-5] generating connector hotplug event
<7> [130.287220] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:HDMI-A-6] adding connector to sysfs
<7> [130.287501] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:HDMI-A-6] generating connector hotplug event
<7> [130.287542] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:538:HDMI-A-7] adding connector to sysfs
<7> [130.287781] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:538:HDMI-A-7] generating connector hotplug event
<7> [130.287814] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:DP-6] adding connector to sysfs
<7> [130.288249] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6
<7> [130.288854] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:DP-6] generating connector hotplug event
<7> [130.288892] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:550:HDMI-A-8] adding connector to sysfs
<7> [130.289219] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:550:HDMI-A-8] generating connector hotplug event
<6> [130.289248] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1
<7> [130.289338] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [130.289470] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [130.290305] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:150:pipe A] not active, skipping
<7> [130.290420] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping
<7> [130.290524] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:386:pipe C] not active, skipping
<7> [130.290622] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:504:pipe D] not active, skipping
<7> [130.290722] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [130.290907] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [130.291092] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [130.295270] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:507:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.295402] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [130.299569] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:520:HDMI-A-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.299683] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [130.303879] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.303994] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [130.308130] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:HDMI-A-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.308237] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<7> [130.312389] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:538:HDMI-A-7] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.312488] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<7> [130.316702] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:DP-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.316817] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [130.321029] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:550:HDMI-A-8] status updated from unknown to disconnected (epoch counter 0->1)
<7> [130.321307] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [130.321603] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4]
<7> [130.321607] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [130.325775] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4] disconnected
<7> [130.325780] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5]
<7> [130.325783] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [130.330031] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5] disconnected
<7> [130.330034] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5]
<7> [130.330036] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [130.334248] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5] disconnected
<7> [130.334251] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6]
<7> [130.334253] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [130.338442] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6] disconnected
<7> [130.338445] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7]
<7> [130.338448] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<7> [130.342603] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7] disconnected
<7> [130.342610] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6]
<7> [130.342613] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<7> [130.346769] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6] disconnected
<7> [130.346774] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8]
<7> [130.346777] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [130.350934] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8] disconnected
<7> [130.350938] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [130.350940] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-4] enabled? no
<7> [130.350942] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-5] enabled? no
<7> [130.350944] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-5] enabled? no
<7> [130.350945] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-6] enabled? no
<7> [130.350947] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-7] enabled? no
<7> [130.350949] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-6] enabled? no
<7> [130.350950] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-8] enabled? no
<7> [130.350969] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [130.350975] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [130.351011] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [130.351017] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [130.351950] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [130.351914] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [130.352062] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [130.352150] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4]
<7> [130.352156] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [130.352204] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [130.352317] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [130.352427] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [130.352537] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [130.352644] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [130.352748] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [130.352848] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [130.352956] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [130.353056] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [130.353158] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [130.353264] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [130.353366] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [130.353464] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [130.353563] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [130.353663] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [130.353768] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [130.353869] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [130.353982] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [130.354127] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [130.354260] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [130.356398] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4] disconnected
<7> [130.356404] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5]
<7> [130.356406] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [130.360557] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5] disconnected
<7> [130.360561] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5]
<7> [130.360563] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [130.364713] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5] disconnected
<7> [130.364717] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6]
<7> [130.364720] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [130.368886] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6] disconnected
<7> [130.368889] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7]
<7> [130.368892] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<6> [130.371053] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits
<7> [130.370970] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [130.371568] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [130.371732] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [130.371843] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [130.372611] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0
<7> [130.372649] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [130.373181] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7] disconnected
<7> [130.373184] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6]
<7> [130.373184] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [130.373187] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<7> [130.373416] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [130.376111] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [130.377331] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6] disconnected
<7> [130.377335] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8]
<7> [130.377337] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [130.379937] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [130.381727] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x02000000)
<7> [130.381934] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [130.382094] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [130.382239] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [130.382359] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [130.382498] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [130.382698] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [130.382914] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [130.383130] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.383329] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.383520] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.383734] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8] disconnected
<7> [130.383738] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [130.383744] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-4] enabled? no
<7> [130.383746] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-5] enabled? no
<7> [130.383748] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-5] enabled? no
<7> [130.383749] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-6] enabled? no
<7> [130.383751] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-7] enabled? no
<7> [130.383752] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-6] enabled? no
<7> [130.383754] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-8] enabled? no
<7> [130.383845] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [130.383857] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [130.383976] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [130.384017] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<6> [130.383971] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [130.384051] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [130.384059] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [130.384210] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [130.384335] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.384721] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.384876] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [130.385025] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [130.385045] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [130.389637] snd_hda_intel 0000:0b:00.0: Unknown capability 0
<7> [130.402005] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [130.402077] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [130.402273] [IGT] xe_module_load: exiting, ret=0
|