igt@kms_plane_scaling@plane-upscale-20x20-with-modifiers@pipe-b on shard-lnl@IGT

Detail	Value
Duration	1.64 seconds
Hostname	shard-lnl-5
Igt-Version	IGT-Version: 2.3-g2020b0bf9 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4576-cc2c646d39200973c-debug+ x86_64)
Out	Starting dynamic subtest: pipe-B Trying on eDP-1 Dynamic subtest pipe-B: SUCCESS (1.638s)
Err	Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (1.638s)
Dmesg	<6> [325.229477] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B <7> [325.232862] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431] <7> [325.235044] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:392:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [325.235526] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:391:DDI A/PHY A][CRTC:269:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [325.235921] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000 <7> [325.236337] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [325.236732] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:391:DDI A/PHY A] [CRTC:269:pipe B] <7> [325.237095] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [325.237459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [325.237796] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [325.238101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [325.238478] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [325.238764] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [325.239033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [325.239303] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [325.239551] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [325.239846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [325.240075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [325.240309] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [325.240546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [325.240755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [325.240961] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [325.241155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [325.241405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [325.241606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [325.241806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [325.241980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [325.242150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [325.242361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [325.242524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [325.242681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [325.242833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [325.242985] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [325.243130] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [325.243280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [325.243420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [325.243558] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [325.243691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [325.243824] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [325.243951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [325.244078] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [325.244204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [325.244321] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [325.244425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [325.244520] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [325.244552] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [325.244676] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [325.244685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [325.244796] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [325.244915] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.enable (expected no, found yes) <7> [325.245033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [325.245150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1) <7> [325.245259] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in lane_count (expected 0, found 4) <7> [325.245393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [325.245529] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [325.245634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [325.245741] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [325.245845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [325.245960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [325.246079] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [325.246191] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [325.246306] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [325.246425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [325.246518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [325.246610] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [325.246702] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [325.246788] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [325.246879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [325.246970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [325.247063] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [325.247151] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [325.247238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [325.247345] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [325.247449] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [325.247543] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [325.247626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [325.247704] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [325.247779] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [325.247854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [325.247928] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [325.248002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [325.248075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [325.248148] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [325.248221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [325.248295] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [325.248384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [325.248473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in port_clock (expected 0, found 432000) <7> [325.248561] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset <7> [325.248638] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0 <7> [325.248721] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: staged scaling request for 20x20->2880x1800 scaler_users = 0x40 <7> [325.248800] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2 <7> [325.248861] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2 <7> [325.248924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [325.248982] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [325.249037] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:263:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [325.249091] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [325.249143] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [325.249199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [325.249254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [325.249346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [325.249469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [325.249588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [325.249677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [325.249757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [325.249838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [325.249929] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [325.250016] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:269:pipe B] min cdclk: 0 kHz -> 173855 kHz <7> [325.250136] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated DPLL 0 <7> [325.250208] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving DPLL 0 <7> [325.250282] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:153 <7> [325.250346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [modeset] <7> [325.250453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [NOFB], visible: no <7> [325.250559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [325.250645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [325.250722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [325.250805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [325.250887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [325.250969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset] <7> [325.251050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [325.251128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0 <7> [325.251202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [325.251278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [325.251365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [325.251459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [325.251552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [325.251634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [325.251717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [325.251799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [325.251881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [325.251953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [325.252025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [325.252097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [325.252170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [325.252247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [325.252343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [325.252448] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [325.252555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [325.252635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [325.252706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [325.252776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [325.252848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [325.252921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [325.252995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [325.253072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [325.253150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [325.253224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [325.253309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [325.253406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [325.253508] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [325.253607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0 <7> [325.253685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [325.253754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [325.253824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [325.253895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no, <7> [325.253970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [325.254043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [325.254112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [325.254181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [325.254250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [325.254338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [325.254440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [325.254546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [325.254635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [325.254718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [325.254791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [325.254862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [325.254932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [325.255006] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [325.255082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [325.255157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [325.255239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [325.255333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [325.255424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [325.255515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [325.255603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [325.255674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:431] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [325.255744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0 <7> [325.255811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 20.000000x20.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [325.255879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no <7> [325.255948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no <7> [325.256018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no <7> [325.256089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no <7> [325.256160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no <7> [325.256350] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [325.256494] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [325.256657] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [325.256783] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [325.256918] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [325.257098] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [325.257191] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [325.459560] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 0 <7> [325.460136] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [325.481205] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power off <7> [325.481621] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [325.481734] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power off time <7> [325.482137] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [325.482140] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7> [325.533383] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [325.533780] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [325.533892] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7> [325.534132] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [325.534458] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short <7> [325.534909] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A] <7> [325.535243] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [325.535761] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [325.536311] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:391:DDI A/PHY A] <7> [325.536644] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DDI TC1/PHY TC1] <7> [325.536937] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST A] <7> [325.537240] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST B] <7> [325.537578] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST C] <7> [325.537895] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DDI TC2/PHY TC2] <7> [325.538192] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST A] <7> [325.538539] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST B] <7> [325.538861] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST C] <7> [325.539184] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DDI TC3/PHY TC3] <7> [325.539591] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST A] <7> [325.539908] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST B] <7> [325.540221] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST C] <7> [325.540601] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:401:DP-1] <7> [325.540932] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:413:DP-2] <7> [325.541256] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:421:DP-3] <7> [325.541712] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [325.542079] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [325.543430] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:269:pipe B] <7> [325.543935] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [325.546471] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power on <7> [325.546779] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining) <7> [325.571123] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [325.571394] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7> [325.571654] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [325.572184] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7> [325.779343] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [325.779361] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [325.779378] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [326.035329] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [326.142283] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [326.142759] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power on <7> [326.143168] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7> [326.179379] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [326.179813] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long <7> [326.180123] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7> [326.180552] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A] <7> [326.354003] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [326.354444] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on <7> [326.354765] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7> [326.356869] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [326.358447] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [326.359319] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [326.360535] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [326.361939] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [326.363193] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Clock recovery OK <7> [326.363626] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [326.365099] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [326.365474] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [326.366293] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [326.366769] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [326.367121] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B <7> [326.367599] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 13892 <7> [326.383648] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [326.384124] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [326.384726] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [326.385137] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.386833] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:392:eDP-1] <7> [326.387204] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B] <7> [326.391106] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B <7> [326.391536] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl <7> [326.391640] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:431] is removed <7> [326.391700] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.392025] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.392389] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.392654] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.392962] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.393247] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.393542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.393959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.394324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.394722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.395040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.395438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.396319] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.401393] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.401602] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: staged scaling request for 20x20->2880x1800 scaler_users = 0x40 <7> [326.401862] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.402048] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.402213] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.402428] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.402587] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.402793] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.403017] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.403227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.403417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.403605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.403785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.404004] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:153 <7> [326.416862] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.418484] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.418548] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:432] is removed <7> [326.418585] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.418907] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.419312] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.419629] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.419803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.419992] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.420195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.420517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.420745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.420960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.421162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.421392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.421889] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.434498] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.434676] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: staged scaling request for 20x20->2880x1800 scaler_users = 0x40 <7> [326.434951] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.435184] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.435460] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [326.435662] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 <7> [326.435866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 <7> [326.436104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.436406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.436670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.436915] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.437157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.437429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.437700] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:153 <7> [326.450183] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.451774] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.451882] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:432] is removed <7> [326.451939] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.452382] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.452668] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.452854] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.453016] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.453208] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.453444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.453678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.453900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.454113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.454343] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.454544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.454979] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.467768] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.467965] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80 <7> [326.468306] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.468514] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.468704] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.468877] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.469078] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.469344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.469633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.469856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.470072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.470295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.470496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.470735] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:183 <7> [326.483494] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.485189] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.485336] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:432] is removed <7> [326.485410] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.485698] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.485878] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.486050] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.486198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.486411] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.486597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.486817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.487020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.487234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.487430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.487649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.488079] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.500808] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.500978] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80 <7> [326.501193] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.501441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.501619] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.501789] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.501988] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.502246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.502517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.502755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.502979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.503246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.503460] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.503705] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:183 <7> [326.516841] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.518395] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.518466] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:432] is removed <7> [326.518507] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.518792] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.519029] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.519292] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.519561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.519782] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.519976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.520227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.520461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.520682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.520902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.521151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.521653] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.534544] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.534724] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80 <7> [326.535035] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.535317] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.535538] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [326.535750] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 <7> [326.535988] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 <7> [326.536274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.536649] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80 <7> [326.536843] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.537016] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.537202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [326.537416] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 <7> [326.537570] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 <7> [326.537730] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.537968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.538194] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.538453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.538674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.538882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.539170] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:183 <7> [326.550178] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.551695] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.551792] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:432] is removed <7> [326.551841] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.552173] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.552494] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.552673] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.552795] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.552911] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.553045] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.553266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.553452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.553619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.553773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.553923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.554292] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.567739] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.567963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: staged scaling request for 20x20->2880x1800 scaler_users = 0x100 <7> [326.568364] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.568635] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.568838] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.569033] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.569282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.569495] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.569748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.569992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.570244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.570475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.570689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.570952] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:213 <7> [326.583480] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.585264] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.585353] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:432] is removed <7> [326.585405] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.585728] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.585918] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.586088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.586310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.586503] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.586740] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.587003] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.587253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.587471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.587712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.587937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.588488] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.600905] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.601061] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: staged scaling request for 20x20->2880x1800 scaler_users = 0x100 <7> [326.601382] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.601577] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.601744] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.601907] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.602098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.602328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.602545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.602753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.602967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.603224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.603426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.603662] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:213 <7> [326.616825] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.618359] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.618421] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:432] is removed <7> [326.618457] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.618720] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.618988] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.619282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.619536] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.619738] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.619939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.620202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.620522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.620780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.621026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.621319] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.621829] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.634616] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.634797] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: staged scaling request for 20x20->2880x1800 scaler_users = 0x100 <7> [326.635106] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.635450] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.635677] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [326.635883] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 <7> [326.636111] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 <7> [326.636432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.636724] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.636987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.637274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.637512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.637749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.638027] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:213 <7> [326.650154] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.651635] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.651693] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:432] is removed <7> [326.651731] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.652073] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.652455] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.652741] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.652913] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.653079] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.653282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.653528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.653755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.653972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.654184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.654424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.654928] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.668024] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.668303] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200 <7> [326.668607] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.668823] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.669031] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.669268] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.669471] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.669703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.669991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.670280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.670606] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.670868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.671120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.671437] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:243 <7> [326.683475] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.685279] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.685374] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:432] is removed <7> [326.685428] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.685742] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.685934] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.686128] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.686374] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.686565] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.686822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.687107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.687399] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.687664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.687952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.688190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.688764] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.701267] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.701467] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200 <7> [326.701755] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.701979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.702224] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.702445] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.702707] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.702953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.703279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.703543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.703793] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.704054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.704297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.704578] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:243 <7> [326.716796] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.718311] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.718369] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:432] is removed <7> [326.718404] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.718628] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.718893] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.719162] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.719578] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.719799] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.720016] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.720283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.720535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.720778] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.721006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.721254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.721792] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.734612] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.734823] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200 <7> [326.735136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.735472] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.735714] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [326.735948] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 <7> [326.736163] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 <7> [326.736468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.736764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.737034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.737332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.737601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.737842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.738130] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:243 <7> [326.750144] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.752020] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.752116] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:432] is removed <7> [326.752171] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.752601] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.752856] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.753048] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.753251] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.753428] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.753628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.753865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.754094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.754349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.754572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.754789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.755338] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.768176] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.768503] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400 <7> [326.768797] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.769023] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.769320] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.769560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.769750] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.769959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.770331] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400 <7> [326.770526] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.770696] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.770882] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.771057] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.771260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.771417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.771633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.771845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.772040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.772279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.772469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.772701] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:253 <7> [326.783433] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.785068] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.785182] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:432] is removed <7> [326.785287] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.785680] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.785817] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.785943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.786066] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.786182] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.786352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.786530] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.786701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.786862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.787015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.787164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.787558] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.800937] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.801107] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400 <7> [326.801420] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.801635] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.801808] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.801975] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.802134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.802352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.802667] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400 <7> [326.802837] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.802979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.803119] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 <7> [326.803314] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 <7> [326.803464] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 <7> [326.803622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.803835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.804036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.804275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.804462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.804643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.804899] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:253 <7> [326.816810] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.818645] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.818735] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:432] is removed <7> [326.818790] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.819156] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.819555] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.819746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.819874] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.819999] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.820140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.820347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.820532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.820706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.820874] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.821039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.821446] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [326.834242] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432] <7> [326.834399] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400 <7> [326.834596] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [326.834757] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [326.834915] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 <7> [326.835111] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 <7> [326.835359] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 <7> [326.835586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1 <7> [326.835904] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [326.836145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [326.836413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.836649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [326.836912] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [326.837181] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:253 <7> [326.850115] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [326.851746] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl <7> [326.851825] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:432] is removed <7> [326.851871] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0 <7> [326.852162] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [326.852516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [326.852708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.852852] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.852996] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [326.853157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0 <7> [326.853404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [326.853610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [326.853814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.854010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [326.854211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [326.854615] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <6> [326.868123] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

<6> [325.229477] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B

<7> [325.232862] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]

<7> [325.235044] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:392:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [325.235526] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:391:DDI A/PHY A][CRTC:269:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [325.235921] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000

<7> [325.236337] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [325.236732] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:391:DDI A/PHY A] [CRTC:269:pipe B]

<7> [325.237095] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [325.237459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [325.237796] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [325.238101] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [325.238478] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [325.238764] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [325.239033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [325.239303] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [325.239551] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [325.239846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [325.240075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [325.240309] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [325.240546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [325.240755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [325.240961] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [325.241155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [325.241405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [325.241606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [325.241806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [325.241980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [325.242150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [325.242361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [325.242524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [325.242681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [325.242833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [325.242985] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [325.243130] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [325.243280] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [325.243420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [325.243558] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [325.243691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [325.243824] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [325.243951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [325.244078] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [325.244204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [325.244321] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [325.244425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [325.244520] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [325.244552] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [325.244676] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [325.244685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [325.244796] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [325.244915] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.enable (expected no, found yes)

<7> [325.245033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [325.245150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)

<7> [325.245259] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in lane_count (expected 0, found 4)

<7> [325.245393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [325.245529] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [325.245634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [325.245741] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [325.245845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [325.245960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [325.246079] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [325.246191] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [325.246306] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [325.246425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [325.246518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [325.246610] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [325.246702] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [325.246788] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [325.246879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [325.246970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [325.247063] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [325.247151] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [325.247238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [325.247345] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [325.247449] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [325.247543] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [325.247626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [325.247704] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [325.247779] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [325.247854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [325.247928] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [325.248002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [325.248075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [325.248148] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [325.248221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [325.248295] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [325.248384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [325.248473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [325.248561] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset

<7> [325.248638] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing DPLL 0

<7> [325.248721] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: staged scaling request for 20x20->2880x1800 scaler_users = 0x40

<7> [325.248800] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2

<7> [325.248861] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2

<7> [325.248924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [325.248982] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [325.249037] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:263:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [325.249091] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [325.249143] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [325.249199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [325.249254] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [325.249346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [325.249469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [325.249588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [325.249677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [325.249757] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [325.249838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [325.249929] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [325.250016] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:269:pipe B] min cdclk: 0 kHz -> 173855 kHz

<7> [325.250136] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:269:pipe B] allocated DPLL 0

<7> [325.250208] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:269:pipe B] reserving DPLL 0

<7> [325.250282] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:153

<7> [325.250346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [modeset]

<7> [325.250453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [NOFB], visible: no

<7> [325.250559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [325.250645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [325.250722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [325.250805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [325.250887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [325.250969] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: yes [modeset]

<7> [325.251050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [325.251128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0

<7> [325.251202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [325.251278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [325.251365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [325.251459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [325.251552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [325.251634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [325.251717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [325.251799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [325.251881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [325.251953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [325.252025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [325.252097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [325.252170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [325.252247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [325.252343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [325.252448] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [325.252555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [325.252635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [325.252706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [325.252776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [325.252848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [325.252921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [325.252995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [325.253072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [325.253150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [325.253224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [325.253309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [325.253406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [325.253508] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [325.253607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0

<7> [325.253685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [325.253754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [325.253824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [325.253895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,

<7> [325.253970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [325.254043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [325.254112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [325.254181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [325.254250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [325.254338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [325.254440] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [325.254546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [325.254635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [325.254718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [325.254791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [325.254862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [325.254932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [325.255006] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [325.255082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [325.255157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [325.255239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [325.255333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [325.255424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [325.255515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [325.255603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [325.255674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [FB:431] 20x20 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [325.255744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0

<7> [325.255811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 20.000000x20.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [325.255879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no

<7> [325.255948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no

<7> [325.256018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no

<7> [325.256089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no

<7> [325.256160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no

<7> [325.256350] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [325.256494] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [325.256657] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [325.256783] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [325.256918] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [325.257098] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [325.257191] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [325.459560] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 0

<7> [325.460136] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [325.481205] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power off

<7> [325.481621] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [325.481734] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [325.482137] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [325.482140] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short

<7> [325.533383] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [325.533780] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [325.533892] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A]

<7> [325.534132] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [325.534458] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short

<7> [325.534909] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A]

<7> [325.535243] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [325.535761] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [325.536311] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:391:DDI A/PHY A]

<7> [325.536644] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DDI TC1/PHY TC1]

<7> [325.536937] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST A]

<7> [325.537240] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST B]

<7> [325.537578] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST C]

<7> [325.537895] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DDI TC2/PHY TC2]

<7> [325.538192] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST A]

<7> [325.538539] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST B]

<7> [325.538861] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST C]

<7> [325.539184] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DDI TC3/PHY TC3]

<7> [325.539591] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST A]

<7> [325.539908] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST B]

<7> [325.540221] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST C]

<7> [325.540601] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:401:DP-1]

<7> [325.540932] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:413:DP-2]

<7> [325.541256] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:421:DP-3]

<7> [325.541712] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [325.542079] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [325.543430] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:269:pipe B]

<7> [325.543935] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [325.546471] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power on

<7> [325.546779] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining)

<7> [325.571123] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [325.571394] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long

<7> [325.571654] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [325.572184] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A]

<7> [325.779343] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [325.779361] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [325.779378] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [326.035329] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [326.142283] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [326.142759] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power on

<7> [326.143168] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063

<7> [326.179379] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [326.179813] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long

<7> [326.180123] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20

<7> [326.180552] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A]

<7> [326.354003] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [326.354444] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on

<7> [326.354765] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b

<7> [326.356869] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [326.358447] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [326.359319] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [326.360535] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [326.361939] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [326.363193] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Clock recovery OK

<7> [326.363626] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [326.365099] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [326.365474] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [326.366293] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [326.366769] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [326.367121] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B

<7> [326.367599] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 13892

<7> [326.383648] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [326.384124] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [326.384726] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [326.385137] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.386833] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:392:eDP-1]

<7> [326.387204] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B]

<7> [326.391106] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B

<7> [326.391536] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl

<7> [326.391640] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:431] is removed

<7> [326.391700] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.392025] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.392389] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.392654] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.392962] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.393247] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.393542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.393959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.394324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.394722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.395040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.395438] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.396319] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.401393] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.401602] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: staged scaling request for 20x20->2880x1800 scaler_users = 0x40

<7> [326.401862] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.402048] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.402213] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.402428] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.402587] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.402793] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.403017] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.403227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.403417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.403605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.403785] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.404004] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:153

<7> [326.416862] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.418484] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.418548] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:432] is removed

<7> [326.418585] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.418907] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.419312] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.419629] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.419803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.419992] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.420195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.420517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.420745] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.420960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.421162] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.421392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.421889] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.434498] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.434676] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: staged scaling request for 20x20->2880x1800 scaler_users = 0x40

<7> [326.434951] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.435184] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.435460] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [326.435662] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19

<7> [326.435866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20

<7> [326.436104] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.436406] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.436670] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.436915] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.437157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.437429] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.437700] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:153

<7> [326.450183] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.451774] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.451882] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:153:plane 1B] because [FB:432] is removed

<7> [326.451939] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.452382] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:153:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.452668] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.452854] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.453016] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.453208] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:153:plane 1B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.453444] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.453678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.453900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.454113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.454343] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.454544] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.454979] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.467768] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.467965] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80

<7> [326.468306] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.468514] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.468704] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.468877] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.469078] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.469344] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.469633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.469856] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.470072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.470295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.470496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.470735] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:183

<7> [326.483494] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.485189] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.485336] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:432] is removed

<7> [326.485410] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.485698] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.485878] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.486050] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.486198] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.486411] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.486597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.486817] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.487020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.487234] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.487430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.487649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.488079] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.500808] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.500978] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80

<7> [326.501193] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.501441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.501619] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.501789] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.501988] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.502246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.502517] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.502755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.502979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.503246] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.503460] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.503705] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:183

<7> [326.516841] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.518395] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.518466] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:432] is removed

<7> [326.518507] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.518792] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.519029] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.519292] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.519561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.519782] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.519976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.520227] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.520461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.520682] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.520902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.521151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.521653] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.534544] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.534724] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80

<7> [326.535035] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.535317] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.535538] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [326.535750] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19

<7> [326.535988] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20

<7> [326.536274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.536649] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: staged scaling request for 20x20->2880x1800 scaler_users = 0x80

<7> [326.536843] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.537016] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.537202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [326.537416] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19

<7> [326.537570] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20

<7> [326.537730] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.537968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.538194] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.538453] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.538674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.538882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.539170] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:183

<7> [326.550178] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.551695] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.551792] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:183:plane 2B] because [FB:432] is removed

<7> [326.551841] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.552173] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:183:plane 2B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.552494] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.552673] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.552795] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.552911] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:183:plane 2B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.553045] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.553266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.553452] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.553619] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.553773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.553923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.554292] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.567739] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.567963] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: staged scaling request for 20x20->2880x1800 scaler_users = 0x100

<7> [326.568364] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.568635] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.568838] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.569033] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.569282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.569495] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.569748] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.569992] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.570244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.570475] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.570689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.570952] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:213

<7> [326.583480] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.585264] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.585353] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:432] is removed

<7> [326.585405] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.585728] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.585918] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.586088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.586310] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.586503] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.586740] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.587003] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.587253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.587471] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.587712] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.587937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.588488] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.600905] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.601061] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: staged scaling request for 20x20->2880x1800 scaler_users = 0x100

<7> [326.601382] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.601577] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.601744] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.601907] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.602098] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.602328] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.602545] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.602753] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.602967] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.603224] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.603426] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.603662] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:213

<7> [326.616825] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.618359] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.618421] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:432] is removed

<7> [326.618457] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.618720] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.618988] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.619282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.619536] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.619738] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.619939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.620202] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.620522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.620780] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.621026] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.621319] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.621829] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.634616] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.634797] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: staged scaling request for 20x20->2880x1800 scaler_users = 0x100

<7> [326.635106] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.635450] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.635677] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [326.635883] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19

<7> [326.636111] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20

<7> [326.636432] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.636724] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.636987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.637274] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.637512] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.637749] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.638027] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:213

<7> [326.650154] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.651635] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.651693] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:213:plane 3B] because [FB:432] is removed

<7> [326.651731] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.652073] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:213:plane 3B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.652455] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.652741] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.652913] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.653079] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:213:plane 3B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.653282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.653528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.653755] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.653972] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.654184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.654424] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.654928] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.668024] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.668303] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200

<7> [326.668607] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.668823] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.669031] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.669268] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.669471] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.669703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.669991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.670280] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.670606] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.670868] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.671120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.671437] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:243

<7> [326.683475] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.685279] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.685374] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:432] is removed

<7> [326.685428] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.685742] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.685934] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.686128] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.686374] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.686565] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.686822] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.687107] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.687399] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.687664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.687952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.688190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.688764] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.701267] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.701467] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200

<7> [326.701755] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.701979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.702224] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.702445] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.702707] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.702953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.703279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.703543] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.703793] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.704054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.704297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.704578] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:243

<7> [326.716796] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.718311] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.718369] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:432] is removed

<7> [326.718404] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.718628] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.718893] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.719162] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.719578] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.719799] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.720016] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.720283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.720535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.720778] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.721006] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.721254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.721792] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.734612] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.734823] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: staged scaling request for 20x20->2880x1800 scaler_users = 0x200

<7> [326.735136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.735472] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.735714] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [326.735948] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19

<7> [326.736163] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20

<7> [326.736468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.736764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.737034] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.737332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.737601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.737842] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.738130] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:243

<7> [326.750144] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.752020] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.752116] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:243:plane 4B] because [FB:432] is removed

<7> [326.752171] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.752601] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:243:plane 4B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.752856] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.753048] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.753251] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.753428] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:243:plane 4B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.753628] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.753865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.754094] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.754349] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.754572] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.754789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.755338] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.768176] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.768503] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400

<7> [326.768797] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.769023] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.769320] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.769560] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.769750] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.769959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.770331] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400

<7> [326.770526] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.770696] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.770882] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.771057] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.771260] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.771417] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.771633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.771845] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.772040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.772279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.772469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.772701] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:253

<7> [326.783433] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.785068] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.785182] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:432] is removed

<7> [326.785287] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.785680] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.785817] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.785943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.786066] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.786182] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.786352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.786530] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.786701] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.786862] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.787015] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.787164] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.787558] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.800937] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.801107] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400

<7> [326.801420] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.801635] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.801808] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.801975] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.802134] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.802352] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.802667] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400

<7> [326.802837] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.802979] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.803119] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0

<7> [326.803314] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33

<7> [326.803464] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34

<7> [326.803622] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.803835] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.804036] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.804275] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.804462] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.804643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.804899] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:253

<7> [326.816810] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.818645] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.818735] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:432] is removed

<7> [326.818790] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.819156] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.819555] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.819746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 9, 13, 13, 13, 13, 13, 0, 0, 0, 9, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.819874] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 19, 27, 27, 27, 27, 27, 0, 0, 33, 19, 33 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.819999] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 22, 31, 31, 31, 31, 31, 0, 0, 34, 22, 34 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.820140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.820347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.820532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.820706] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.820874] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.821039] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.821446] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [326.834242] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]

<7> [326.834399] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: staged scaling request for 20x20->2880x1800 scaler_users = 0x400

<7> [326.834596] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [326.834757] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [326.834915] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0

<7> [326.835111] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19

<7> [326.835359] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20

<7> [326.835586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 1390840 num active planes 1

<7> [326.835904] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [326.836145] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [326.836413] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.836649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [326.836912] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [326.837181] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:269:pipe B] attached scaler id 1.0 to PLANE:253

<7> [326.850115] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [326.851746] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl

<7> [326.851825] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:253:plane 5B] because [FB:432] is removed

<7> [326.851871] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:269:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0

<7> [326.852162] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:253:plane 5B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [326.852516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [326.852708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.852852] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] blocks 3, 8, 8, 8, 8, 8, 0, 0, 19, 3, 19 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.852996] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:253:plane 5B] min_ddb 5, 11, 11, 11, 11, 11, 0, 0, 20, 5, 20 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [326.853157] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:269:pipe B] data rate 0 num active planes 0

<7> [326.853404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [326.853610] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [326.853814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.854010] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [326.854211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [326.854615] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<6> [326.868123] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS

Results for igt@kms_plane_scaling@plane-upscale-20x20-with-modifiers@pipe-b