Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-g2020b0bf9 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4576-cc2c646d39200973c-debug+ x86_64)
Out 
Using IGT_SRANDOM=1771521778 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.033s)
Dmesg
<6> [251.472677] Console: switching to colour dummy device 80x25
<6> [251.472855] [IGT] kms_force_connector_basic: executing
<7> [251.475800] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [251.475808] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.475811] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.480021] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [251.480057] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.480060] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.484253] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [251.484291] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.484293] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.488437] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<6> [251.488646] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [251.488937] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [251.488943] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.488947] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.489376] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.489482] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [251.489855] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.489954] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.489962] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.490059] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.496149] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.496155] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.496251] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] status updated from disconnected to connected
<7> [251.496290] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [251.496293] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.496295] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.496297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.496299] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.496301] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.496328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.496331] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.496459] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [251.496522] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [251.496815] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.496917] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [251.497293] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.497397] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.497403] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.497506] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.503587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.503596] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.503734] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [251.503737] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.503740] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.503742] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.503744] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.503745] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.503925] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:516:HDMI-A-1] EDID override set
<7> [251.503941] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.503943] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.504282] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:516:HDMI-A-1] ELD monitor IGT
<7> [251.504286] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:516:HDMI-A-1] ELD size 24, SAD count 0
<7> [251.504588] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [251.504709] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [251.505082] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0040 w(1)
<7> [251.505175] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [251.505265] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [251.505273] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [251.505278] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [251.505280] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [251.505283] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [251.505285] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.505287] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.505289] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.505376] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:HDMI-A-1] EDID override reset
<7> [251.505525] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.505528] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.505930] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.506018] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK on first message, retry
<7> [251.506388] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus dpb] NAK for addr: 0050 w(1)
<7> [251.506480] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.506486] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [251.506575] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus dpb. force bit now 1
<7> [251.512622] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpb
<7> [251.512627] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus dpb. force bit now 0
<7> [251.512709] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:516:HDMI-A-1] EDID changed, epoch counter 2
<7> [251.512746] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [251.512753] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [251.512759] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] probed modes:
<7> [251.512761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [251.512763] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [251.512765] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [251.512767] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [251.512768] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [251.512894] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [251.512899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.512902] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.517044] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] status updated from connected to disconnected
<7> [251.517051] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [251.517057] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [251.517104] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [251.517147] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.517149] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.521297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<6> [251.521544] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [251.524303] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [251.524308] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [251.524353] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [251.524356] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [251.524866] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [251.525255] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [251.525411] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [251.525565] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [251.525729] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [251.525735] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [251.525740] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [251.525744] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [251.525763] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [251.525896] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [251.526024] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [251.526659] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [251.526664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [251.526669] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [251.526675] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [251.526680] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [251.530873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [251.530877] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1]
<7> [251.530880] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-1]
<7> [251.531032] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1] disconnected
<7> [251.531035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [251.531037] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-2]
<7> [251.552036] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.573000] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.593962] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.614924] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.635883] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.656841] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.677797] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.698755] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.719718] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.740691] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.761660] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.782624] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.803586] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.824542] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.845497] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.866451] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.887410] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.908369] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.929357] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.950341] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.971325] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [251.992303] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.013269] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.034241] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.055214] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.076190] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.097149] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.118107] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.139063] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.160019] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.180978] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.201939] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.202045] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [252.202065] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [252.202103] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [252.202107] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:544:DP-3]
<7> [252.202263] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [252.202494] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [252.202501] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:553:DP-4]
<7> [252.202732] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [252.202737] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] enabled? yes
<7> [252.202741] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:516:HDMI-A-1] enabled? no
<7> [252.202745] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-1] enabled? no
<7> [252.202749] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:535:DP-2] enabled? no
<7> [252.202751] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:544:DP-3] enabled? no
<7> [252.202754] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:553:DP-4] enabled? no
<7> [252.202792] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [252.202809] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:eDP-1] found preferred mode: 3840x2160
<7> [252.202812] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 3840x2160 config
<7> [252.202834] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:150:pipe A] desired mode 3840x2160 set (0,0)
<7> [252.223061] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [252.223433] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:507:eDP-1] force updated from 0 to 0 or reprobing
<7> [252.223441] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [252.223447] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [252.223948] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [252.224295] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [252.224520] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [252.224678] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [252.224844] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [252.224851] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [252.224855] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [252.224860] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [252.224880] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [252.225020] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [252.225162] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [252.226007] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [252.226024] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [252.226035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [252.226133] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [252.226143] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [252.226863] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [252.227240] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [252.227472] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [252.227656] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [252.227790] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [252.227794] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [252.227797] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [252.227800] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [252.227812] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [252.227908] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [252.228002] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [252.228541] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [252.228544] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [252.228547] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [252.228670] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:507:eDP-1] EDID override reset
<7> [252.228693] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1]
<7> [252.228698] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:eDP-1]
<7> [252.229211] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [252.229520] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000
<7> [252.229678] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [252.229821] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 270000, 324000, 432000, 540000, 810000
<7> [252.229923] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Supported Monitor Refresh rate range is 0 Hz - 0 Hz
<7> [252.229926] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [252.229929] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD monitor
<7> [252.229931] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:507:eDP-1] ELD size 20, SAD count 0
<7> [252.229940] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] VRR capable: no
<7> [252.230036] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [252.230130] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:507:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [252.230661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:eDP-1] probed modes:
<7> [252.230664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 538600 3840 3888 3920 4000 2160 2163 2168 2244 0x48 0xa
<7> [252.230666] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 40 359070 3840 3888 3920 4000 2160 2163 2168 2244 0x40 0xa
<7> [252.230816] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:516:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [252.230823] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [252.230828] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [252.235016] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [252.235038] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [252.235041] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [252.239178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [252.239280] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:516:HDMI-A-1] EDID override reset
<7> [252.239294] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1]
<7> [252.239297] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:516:HDMI-A-1]
<7> [252.243500] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:516:HDMI-A-1] disconnected
<7> [252.243586] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:525:DP-1] EDID override reset
<7> [252.243600] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1]
<7> [252.243603] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-1]
<7> [252.243784] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-1] disconnected
<7> [252.243847] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:535:DP-2] EDID override reset
<7> [252.243857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2]
<7> [252.243859] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:535:DP-2]
<7> [252.264888] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.285894] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.306850] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.327808] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.348762] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.369716] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.390667] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.411618] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.432570] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.453522] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.474476] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.495431] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.516384] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.537335] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.558284] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.579264] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.600239] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.621199] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.642158] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.663116] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.684068] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.705026] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.725981] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.746935] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.767888] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.788843] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.809797] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.830752] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.851704] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.872657] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.893610] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.914567] xe 0000:00:02.0: [drm:intel_dp_aux_xfer [xe]] AUX USBC2/DDI TC2/PHY TC2: timeout (status 0x7d40023f)
<7> [252.914672] xe 0000:00:02.0: [drm:drm_dp_dpcd_access [drm_display_helper]] AUX USBC2/DDI TC2/PHY TC2: Too many retries, giving up. First error: -110
<7> [252.914690] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:535:DP-2] disconnected
<7> [252.914793] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:544:DP-3] EDID override reset
<7> [252.914809] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3]
<7> [252.914812] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:544:DP-3]
<7> [252.914978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:544:DP-3] disconnected
<7> [252.915044] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:553:DP-4] EDID override reset
<7> [252.915056] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4]
<7> [252.915058] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:553:DP-4]
<7> [252.915205] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:553:DP-4] disconnected
<7> [252.935396] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [252.935551] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [252.952087] Console: switching to colour frame buffer device 240x67
Created at 2026-02-19 17:31:10