Result:
i915_display_info10 igt_runner10 results10.json results10-xe-load.json guc_logs10.tar boot10 dmesg10
| Detail | Value |
|---|---|
| Duration | 1.84 seconds |
| Hostname |
shard-lnl-4 |
| Igt-Version |
IGT-Version: 2.3-gd3c67e0f1 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4575-c81e41f7aca96f583-debug+ x86_64) |
| Out |
Starting dynamic subtest: pipe-C Trying on eDP-1 Dynamic subtest pipe-C: SUCCESS (1.841s) Subtest plane-upscale-factor-0-25-with-modifiers: SUCCESS (4.014s) |
| Err |
Starting dynamic subtest: pipe-C Dynamic subtest pipe-C: SUCCESS (1.841s) Subtest plane-upscale-factor-0-25-with-modifiers: SUCCESS (4.014s) |
| Dmesg |
<6> [230.853187] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [230.857098] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [230.858723] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:392:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [230.859043] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:391:DDI A/PHY A][CRTC:388:pipe C] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [230.859278] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [230.859496] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] PSR2 not supported in transcoder C
<7> [230.859680] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:388:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [230.859906] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:391:DDI A/PHY A] [CRTC:388:pipe C]
<7> [230.860150] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [230.860351] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [230.860539] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [230.860724] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [230.861125] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [230.861297] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [230.861461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [230.861621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [230.861773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [230.861944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [230.862087] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [230.862224] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [230.862356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [230.862487] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [230.862615] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [230.862736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [230.862863] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [230.862978] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [230.863089] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [230.863199] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [230.863306] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [230.863409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [230.863512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [230.863614] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [230.863715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [230.863826] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [230.863970] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [230.864079] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [230.864172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [230.864265] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [230.864356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [230.864454] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [230.864556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [230.864657] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [230.864757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [230.864861] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [230.864960] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [230.865040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:269:pipe B] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [230.865119] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:269:pipe B] fastset requirement not met, forcing full modeset
<7> [230.865201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [230.865283] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [230.865364] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [230.865442] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [230.865521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [230.865599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [230.865676] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [230.865752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [230.865824] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [230.865932] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [230.866009] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [230.866100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [230.866192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [230.866292] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [230.866374] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [230.866453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [230.866530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [230.866599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [230.866667] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [230.866736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [230.866806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [230.866919] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [230.867010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [230.867099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [230.867182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [230.867249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [230.867316] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [230.867383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [230.867450] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [230.867521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [230.867594] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [230.867666] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [230.867738] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [230.867808] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [230.867931] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in dpll_hw_state
<7> [230.867921] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [230.868026] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [230.868078] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [230.868117] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [230.868207] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:
<7> [230.868203] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [230.868296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [230.868381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [230.868453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000
<7> [230.868521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000
<7> [230.868588] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000
<7> [230.868655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000
<7> [230.868723] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000
<7> [230.868791] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000
<7> [230.868888] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000
<7> [230.868987] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000
<7> [230.869089] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000
<7> [230.869181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000
<7> [230.869252] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [230.869317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [230.869383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [230.869448] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [230.869515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [230.869581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [230.869649] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [230.869719] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [230.869789] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [230.869883] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [230.869975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [230.870067] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [230.870156] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [230.870244] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [230.870317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [230.870386] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [230.870453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [230.870522] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:388:pipe C] fastset requirement not met, forcing full modeset
<7> [230.870594] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:269:pipe B] releasing DPLL 0
<7> [230.870686] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.12: staged scaling request for 720x450->2880x1800 scaler_users = 0x1000
<7> [230.870867] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [230.870963] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:269:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [230.871051] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:388:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [230.871139] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:263:cursor B] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [230.871210] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:272:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [230.871265] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:382:cursor C] ddb ( 0 - 0) -> (2003 - 2048), size 0 -> 45
<7> [230.871318] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [230.871373] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [230.871430] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [230.871484] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [230.871554] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [230.871638] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [230.871722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [230.871808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [230.871916] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [230.872021] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [230.872125] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:269:pipe B] min cdclk: 173855 kHz -> 0 kHz
<7> [230.872208] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:388:pipe C] min cdclk: 0 kHz -> 173855 kHz
<7> [230.872341] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:388:pipe C] allocated DPLL 0
<7> [230.872430] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:388:pipe C] reserving DPLL 0
<7> [230.872516] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:272
<7> [230.872582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:269:pipe B] enable: no [modeset]
<7> [230.872670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:153:plane 1B] fb: [NOFB], visible: no
<7> [230.872750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:183:plane 2B] fb: [NOFB], visible: no
<7> [230.872838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:213:plane 3B] fb: [NOFB], visible: no
<7> [230.872933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:243:plane 4B] fb: [NOFB], visible: no
<7> [230.873030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:253:plane 5B] fb: [NOFB], visible: no
<7> [230.873129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:263:cursor B] fb: [NOFB], visible: no
<7> [230.873212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: yes [modeset]
<7> [230.873286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [230.873359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [230.873433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [230.873512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [230.873592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [230.873669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [230.873746] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [230.873823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [230.873928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [230.874023] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [230.874126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [230.874210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [230.874293] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [230.874370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [230.874447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [230.874521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [230.874594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [230.874667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [230.874739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [230.874811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [230.874904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [230.875010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [230.875120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [230.875212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [230.875287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [230.875357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [230.875426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [230.875495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [230.875565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [230.875634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [230.875704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [230.875777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x1000, scaler_id: -1, scaling_filter: 0
<7> [230.875852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [230.875944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [230.876041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [230.876134] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [230.876212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [230.876282] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [230.876355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [230.876430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [230.876504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [230.876578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [230.876657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [230.876737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [230.876817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [230.876925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [230.877030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [230.877128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [230.877210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [230.877287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [230.877357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [230.877427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [230.877495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [230.877565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [230.877633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [230.877702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [230.877770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [230.877854] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:272:plane 1C] fb: [FB:432] 720x450 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [230.877946] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [230.878037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 720.000000x450.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [230.878129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:302:plane 2C] fb: [NOFB], visible: no
<7> [230.878216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:332:plane 3C] fb: [NOFB], visible: no
<7> [230.878291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:362:plane 4C] fb: [NOFB], visible: no
<7> [230.878371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:372:plane 5C] fb: [NOFB], visible: no
<7> [230.878463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:382:cursor C] fb: [NOFB], visible: no
<7> [230.878882] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [230.879007] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [230.879173] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [230.879321] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x82000000)
<7> [230.879502] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [230.879607] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [231.081115] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 0
<7> [231.081656] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [231.085209] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power off
<7> [231.085650] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [231.085644] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [231.086035] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short
<7> [231.086130] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [231.138101] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [231.138401] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short
<7> [231.146881] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [231.147421] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:269:pipe B]
<7> [231.147578] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A]
<7> [231.148198] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A]
<7> [231.149062] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [231.149586] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [231.150173] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:391:DDI A/PHY A]
<7> [231.150576] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DDI TC1/PHY TC1]
<7> [231.150971] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST A]
<7> [231.151320] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST B]
<7> [231.151716] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST C]
<7> [231.152106] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DDI TC2/PHY TC2]
<7> [231.152459] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST A]
<7> [231.152743] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST B]
<7> [231.153069] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST C]
<7> [231.153354] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DDI TC3/PHY TC3]
<7> [231.153638] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST A]
<7> [231.154015] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST B]
<7> [231.154307] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST C]
<7> [231.154590] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:401:DP-1]
<7> [231.154902] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:413:DP-2]
<7> [231.155192] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:421:DP-3]
<7> [231.155547] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [231.155898] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [231.156274] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [231.157970] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:388:pipe C]
<7> [231.158466] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [231.161032] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power on
<7> [231.161317] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining)
<7> [231.174149] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [231.174439] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long
<7> [231.174675] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [231.174965] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A]
<7> [231.657153] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [231.697959] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [231.698308] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power on
<7> [231.698600] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [231.734751] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [231.735362] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long
<7> [231.735859] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [231.736589] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A]
<7> [231.913009] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [231.913474] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on
<7> [231.913962] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [231.916274] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [231.917900] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [231.918839] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [231.920126] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [231.921583] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [231.922751] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Clock recovery OK
<7> [231.923161] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [231.924654] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [231.925073] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [231.925887] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [231.926402] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [231.926843] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe C
<7> [231.927388] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 4518
<7> [231.928621] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 2764800 bytes of contiguous stolen space for FBC, limit: 1
<7> [231.929013] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:272:plane 1C]
<7> [231.943139] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [231.943736] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [231.944300] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x8a000000)
<7> [231.944921] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:269:pipe B]
<7> [231.945355] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [231.946821] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:392:eDP-1]
<7> [231.947258] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:388:pipe C]
<7> [231.951209] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe C
<7> [231.951518] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [231.951607] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:272:plane 1C] because [FB:432] is removed
<7> [231.951676] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [231.952021] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:272:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [231.952230] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [231.952433] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [231.952642] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [231.952860] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [231.953080] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [231.953371] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [231.953641] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [231.953954] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [231.954208] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [231.954450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [231.955786] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [231.959842] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:272:plane 1C]
<7> [231.995331] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [231.995429] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.12: staged scaling request for 720x450->2880x1800 scaler_users = 0x1000
<7> [231.995538] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:272:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [231.995606] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [231.995671] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [231.995735] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [231.995875] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [231.995991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [231.996090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [231.996186] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [231.996279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [231.996369] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [231.996457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [231.996562] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:272
<7> [231.997148] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 3686400 bytes of contiguous stolen space for FBC, limit: 1
<7> [231.997248] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:272:plane 1C]
<7> [232.009853] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.011109] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.011158] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:272:plane 1C] because [FB:433] is removed
<7> [232.011197] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.011353] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:272:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.011468] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.011564] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.011656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.011745] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.011866] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.012000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.012126] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.012244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.012362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.012476] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.012784] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.026442] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:272:plane 1C]
<7> [232.045359] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.045713] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.12: staged scaling request for 720x450->2880x1800 scaler_users = 0x1000
<7> [232.046337] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:272:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.046746] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.047213] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [232.047628] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63
<7> [232.048088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64
<7> [232.048478] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.049038] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.049570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.050110] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.050621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.051099] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.051680] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:272
<7> [232.053433] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 3686400 bytes of contiguous stolen space for FBC, limit: 1
<7> [232.053763] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:272:plane 1C]
<7> [232.059882] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.061212] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.061272] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:272:plane 1C] because [FB:433] is removed
<7> [232.061316] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.061550] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:272:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.061773] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.062020] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.062202] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.062415] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:272:plane 1C] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.062620] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.062966] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.063220] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.063451] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.063677] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.063908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.064454] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.076455] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:272:plane 1C]
<7> [232.114489] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.114600] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.13: staged scaling request for 720x450->2880x1800 scaler_users = 0x2000
<7> [232.114705] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:302:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.114772] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.114858] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.114922] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.114990] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.115074] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.115178] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.115271] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.115362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.115449] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.115535] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.115660] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:302
<7> [232.116242] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 2764800 bytes of contiguous stolen space for FBC, limit: 1
<7> [232.116322] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:302:plane 2C]
<7> [232.126471] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.127558] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.127600] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:302:plane 2C] because [FB:433] is removed
<7> [232.127629] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.127747] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:302:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.128113] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.128394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.128694] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.128807] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.128906] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.129030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.129148] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.129263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.129376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.129485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.129780] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.143058] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:302:plane 2C]
<7> [232.161683] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.162050] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.13: staged scaling request for 720x450->2880x1800 scaler_users = 0x2000
<7> [232.162484] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:302:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.162849] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.163148] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.163437] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.163766] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.164203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.164601] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.165033] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.165375] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.165717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.166140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.166510] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:302
<7> [232.167916] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 3686400 bytes of contiguous stolen space for FBC, limit: 1
<7> [232.168167] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:302:plane 2C]
<7> [232.176470] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.178034] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.178229] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:302:plane 2C] because [FB:433] is removed
<7> [232.178311] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.178828] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:302:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.179111] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.179361] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.179584] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.179881] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.180141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.180524] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.180841] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.181137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.181407] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.181672] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.182385] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.193094] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:302:plane 2C]
<7> [232.230421] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.230520] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.13: staged scaling request for 720x450->2880x1800 scaler_users = 0x2000
<7> [232.230638] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:302:plane 2C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.230717] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.230799] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [232.230866] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63
<7> [232.230943] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64
<7> [232.231024] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.231122] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.231216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.231308] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.231398] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.231487] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.231608] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:302
<7> [232.232160] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 3686400 bytes of contiguous stolen space for FBC, limit: 1
<7> [232.232236] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:302:plane 2C]
<7> [232.243123] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.244308] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.244357] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:302:plane 2C] because [FB:433] is removed
<7> [232.244389] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.244512] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:302:plane 2C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.244607] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.244686] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.244885] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.245130] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:302:plane 2C] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.245396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.245684] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.245793] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.245900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.246004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.246108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.246409] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.259738] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:302:plane 2C]
<7> [232.300025] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.300147] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.14: staged scaling request for 720x450->2880x1800 scaler_users = 0x4000
<7> [232.300256] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:332:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.300325] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.300391] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.300456] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.300519] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.300593] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.300715] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.14: staged scaling request for 720x450->2880x1800 scaler_users = 0x4000
<7> [232.300795] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:332:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.300857] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.300921] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.300986] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.301048] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.301113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.301207] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.301297] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.301384] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.301469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.301553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.301660] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:332
<7> [232.302233] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 2764800 bytes of contiguous stolen space for FBC, limit: 1
<7> [232.302324] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:332:plane 3C]
<7> [232.309919] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.311287] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.311325] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:332:plane 3C] because [FB:433] is removed
<7> [232.311351] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.311459] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:332:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.311542] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.311619] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.311696] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.311774] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.311902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.312030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.312151] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.312269] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.312385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.312499] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.312790] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.326393] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:332:plane 3C]
<7> [232.345017] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.345318] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.14: staged scaling request for 720x450->2880x1800 scaler_users = 0x4000
<7> [232.345737] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:332:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.346189] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.346519] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.346919] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.347209] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.347586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.348071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.348477] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.348931] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.349304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.349689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.350141] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:332
<7> [232.351514] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 3686400 bytes of contiguous stolen space for FBC, limit: 1
<7> [232.351790] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:332:plane 3C]
<7> [232.359798] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.361396] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.361480] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:332:plane 3C] because [FB:433] is removed
<7> [232.361534] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.361958] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:332:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.362253] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.362525] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.362779] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.363131] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.363376] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.363708] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.364053] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.364361] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.364653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.365004] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.365640] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.376410] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:332:plane 3C]
<7> [232.417426] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.417530] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.14: staged scaling request for 720x450->2880x1800 scaler_users = 0x4000
<7> [232.417641] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:332:plane 3C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.417712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.417799] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [232.417883] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63
<7> [232.417954] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64
<7> [232.418040] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.418153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.418267] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.418370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.418463] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.418550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.418660] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:332
<7> [232.419189] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 3686400 bytes of contiguous stolen space for FBC, limit: 1
<7> [232.419282] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:332:plane 3C]
<7> [232.426414] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.427563] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.427600] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:332:plane 3C] because [FB:433] is removed
<7> [232.427628] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.427815] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:332:plane 3C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.428032] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.428243] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.428446] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.428656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:332:plane 3C] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.428736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.428865] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.428968] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.429071] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.429179] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.429286] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.429557] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.443013] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:332:plane 3C]
<7> [232.461532] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.462006] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.15: staged scaling request for 720x450->2880x1800 scaler_users = 0x8000
<7> [232.462431] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:362:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.462913] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.463236] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.463579] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.463960] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.464326] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.464795] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.465279] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.465680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.466075] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.466425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.466892] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:362
<7> [232.476415] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.478251] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.478365] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:362:plane 4C] because [FB:433] is removed
<7> [232.478430] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.478875] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:362:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.479146] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.479393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.479622] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.479872] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.480120] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.480425] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.480717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.481023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.481295] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.481560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.482122] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.515173] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.515273] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.15: staged scaling request for 720x450->2880x1800 scaler_users = 0x8000
<7> [232.515383] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:362:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.515455] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.515523] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.515591] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.515656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.515731] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.515852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.515959] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.516059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.516147] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.516233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.516352] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:362
<7> [232.526409] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.527475] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.527516] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:362:plane 4C] because [FB:433] is removed
<7> [232.527544] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.527647] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:362:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.527747] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.528029] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.528236] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.528467] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.528693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.528840] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.528950] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.529059] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.529166] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.529253] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.529518] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.544085] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.544227] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.15: staged scaling request for 720x450->2880x1800 scaler_users = 0x8000
<7> [232.544389] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:362:plane 4C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.544524] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.544656] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [232.544841] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63
<7> [232.544968] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64
<7> [232.545131] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.545346] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.545530] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.545721] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.545913] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.546083] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.546325] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:362
<7> [232.559722] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.561146] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.561228] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:362:plane 4C] because [FB:433] is removed
<7> [232.561278] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.561565] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:362:plane 4C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.561801] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.562000] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.562224] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.562422] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:362:plane 4C] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.562644] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.562957] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.563219] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.563469] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.563715] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.564031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.564570] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.577982] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.578279] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.16: staged scaling request for 720x450->2880x1800 scaler_users = 0x10000
<7> [232.578676] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:372:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.579080] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.579344] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.579599] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.579917] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.580229] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.580570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.580906] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.581252] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.581541] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.581813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.582129] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:372
<7> [232.593027] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.594509] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.594587] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:372:plane 5C] because [FB:433] is removed
<7> [232.594638] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.595304] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:372:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.595632] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.595967] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.596245] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.596457] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.596687] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.597020] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.597306] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.597599] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.597882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.598138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.598724] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.631241] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.631333] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.16: staged scaling request for 720x450->2880x1800 scaler_users = 0x10000
<7> [232.631443] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:372:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.631515] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.631583] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.631648] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36
<7> [232.631712] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37
<7> [232.631802] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.631892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.631987] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.632078] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.632167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.632258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.632378] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:372
<7> [232.642999] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.644197] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.644271] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:372:plane 5C] because [FB:433] is removed
<7> [232.644317] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.644534] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:372:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.644704] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.644837] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] lines 3, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.644914] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] blocks 19, 92, 92, 92, 92, 92, 0, 0, 33, 22, 36 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.644987] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] min_ddb 22, 103, 103, 103, 103, 103, 0, 0, 34, 26, 37 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.645070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.645188] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.645282] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.645372] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.645461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.645549] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.645794] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [232.660889] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.661083] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.16: staged scaling request for 720x450->2880x1800 scaler_users = 0x10000
<7> [232.661410] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:372:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.661612] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.661837] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [232.662026] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63
<7> [232.662242] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64
<7> [232.662473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.662912] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.16: staged scaling request for 720x450->2880x1800 scaler_users = 0x10000
<7> [232.663157] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:372:plane 5C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [232.663344] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.663522] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0
<7> [232.663699] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63
<7> [232.663928] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64
<7> [232.664141] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 1390840 num active planes 1
<7> [232.664440] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.664739] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.665084] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.665409] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.665703] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.666129] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:388:pipe C] attached scaler id 2.0 to PLANE:372
<7> [232.676379] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [232.677653] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:433] from all active usage due to RMFB ioctl
<7> [232.677730] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:372:plane 5C] because [FB:433] is removed
<7> [232.677840] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:388:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [232.678258] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:372:plane 5C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [232.678650] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [232.678847] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] lines 4, 13, 13, 13, 13, 13, 0, 0, 0, 4, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.679005] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] blocks 25, 79, 79, 79, 79, 79, 0, 0, 63, 25, 63 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.679187] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:372:plane 5C] min_ddb 49, 121, 121, 121, 121, 121, 0, 0, 64, 49, 64 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [232.679373] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:388:pipe C] data rate 0 num active planes 0
<7> [232.679594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [232.679808] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [232.679998] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.680184] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [232.680362] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [232.680822] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<6> [232.694590] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [232.695707] [IGT] kms_plane_scaling: finished subtest plane-upscale-factor-0-25-with-modifiers, SUCCESS
<7> [232.698019] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [232.699987] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:392:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [232.700513] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:391:DDI A/PHY A][CRTC:150:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [232.701021] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [232.701500] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [232.701946] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:391:DDI A/PHY A] [CRTC:150:pipe A]
<7> [232.702357] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [232.702719] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [232.703091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [232.703461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [232.703760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [232.704099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [232.704431] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [232.704707] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [232.705072] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [232.705399] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [232.705655] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [232.705919] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [232.706144] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [232.706399] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [232.706628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [232.706838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [232.707030] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [232.707250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [232.707445] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [232.707651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [232.707837] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [232.708003] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [232.708165] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [232.708319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [232.708472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [232.708626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [232.708780] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [232.708923] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [232.709065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [232.709201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [232.709336] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [232.709468] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [232.709613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [232.709764] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [232.709916] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [232.710039] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [232.710163] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [232.710287] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [232.710405] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset
<7> [232.710518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [232.710630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [232.710739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [232.710861] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [232.710979] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [232.711085] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [232.711187] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [232.711288] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [232.711386] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [232.711482] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [232.711576] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [232.711668] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [232.711761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [232.711963] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [232.712079] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [232.712175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [232.712264] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [232.712349] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [232.712434] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [232.712515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [232.712596] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [232.712677] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [232.712756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [232.712856] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [232.712947] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [232.713038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [232.713124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [232.713201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [232.713278] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [232.713366] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [232.713457] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [232.713547] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [232.713634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [232.713704] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [232.713775] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [232.713859] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [232.713947] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [232.714038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:388:pipe C] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [232.714120] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:388:pipe C] fastset requirement not met, forcing full modeset
<7> [232.714198] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:388:pipe C] releasing DPLL 0
<7> [232.714328] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [232.714424] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x4 -> 0x1
<7> [232.714511] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:388:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x1
<7> [232.714597] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [232.714668] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [232.714727] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [232.714794] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [232.714865] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [232.714940] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [232.715019] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:382:cursor C] ddb (2003 - 2048) -> ( 0 - 0), size 45 -> 0
<7> [232.715113] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 1390840 num active planes 1
<7> [232.715216] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [232.715305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [232.715392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.715478] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [232.715563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [232.715645] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:150:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [232.715723] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:388:pipe C] min cdclk: 173855 kHz -> 0 kHz
<7> [232.715867] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated DPLL 0
<7> [232.715988] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving DPLL 0
<7> [232.716100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]
<7> [232.716196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [232.716291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [232.716396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [232.716498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [232.716598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [232.716679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [232.716756] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [232.716863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [232.716964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [232.717067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [232.717156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [232.717238] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [232.717317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [232.717397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [232.717476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [232.717556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [232.717636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [232.717714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [232.717794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [232.717893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [232.717989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [232.718081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [232.718161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [232.718242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [232.718322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [232.718402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [232.718481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [232.718559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [232.718631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [232.718711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [232.718816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [232.718925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [232.719019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [232.719112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [232.719203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [232.719294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [232.719384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [232.719466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [232.719541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [232.719613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [232.719684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [232.719761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [232.719867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [232.719966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [232.720062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [232.720145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [232.720224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [232.720303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.720378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.720449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.720520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [232.720596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [232.720675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.720753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.720862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [232.720957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [232.721053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [232.721148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:393] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [232.721242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [232.721331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [232.721417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no
<7> [232.721493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no
<7> [232.721576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no
<7> [232.721672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no
<7> [232.721773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no
<7> [232.721866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:388:pipe C] enable: no [modeset]
<7> [232.721958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:272:plane 1C] fb: [NOFB], visible: no
<7> [232.722048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:302:plane 2C] fb: [NOFB], visible: no
<7> [232.722140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:332:plane 3C] fb: [NOFB], visible: no
<7> [232.722228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:362:plane 4C] fb: [NOFB], visible: no
<7> [232.722316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:372:plane 5C] fb: [NOFB], visible: no
<7> [232.722403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:382:cursor C] fb: [NOFB], visible: no
<7> [232.722554] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [232.722731] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x88000000)
<7> [232.722948] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [232.723065] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [232.928986] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 0
<7> [232.929501] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [232.950825] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power off
<7> [232.951288] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [232.951162] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [232.951688] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [232.951789] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short
<7> [233.003775] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [233.004320] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - short
<7> [233.011113] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [233.011606] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:388:pipe C]
<7> [233.011743] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A]
<7> [233.012320] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:391:DDI A/PHY A]
<7> [233.013272] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [233.013802] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [233.014380] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:391:DDI A/PHY A]
<7> [233.014748] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DDI TC1/PHY TC1]
<7> [233.015165] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST A]
<7> [233.015524] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST B]
<7> [233.015921] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST C]
<7> [233.016242] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DDI TC2/PHY TC2]
<7> [233.016597] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST A]
<7> [233.016978] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST B]
<7> [233.017276] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST C]
<7> [233.017578] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DDI TC3/PHY TC3]
<7> [233.017880] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST A]
<7> [233.018153] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST B]
<7> [233.018431] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST C]
<7> [233.018799] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [233.019305] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [233.019581] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [233.019956] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [233.021711] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:150:pipe A]
<7> [233.022276] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [233.024795] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turn panel power on
<7> [233.025153] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining)
<7> [233.039744] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [233.040085] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long
<7> [233.040404] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [233.040743] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A]
<7> [233.520905] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [233.592312] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [233.592650] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 wait for panel power on
<7> [233.593011] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [233.628934] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [233.629499] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:391:DDI A/PHY A] - long
<7> [233.629920] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [233.630340] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:391:DDI A/PHY A]
<7> [233.800639] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [233.801131] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 turning VDD on
<7> [233.801476] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:391:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [233.803874] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [233.805481] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [233.806476] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [233.807781] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [233.809171] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [233.810325] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Clock recovery OK
<7> [233.810716] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [233.812337] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [233.812718] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:392:eDP-1][ENCODER:391:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [233.813601] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [233.814120] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [233.814473] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [233.814943] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:392:eDP-1] set backlight PWM = 4518
<7> [233.831057] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [233.833003] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:392:eDP-1]
<7> [233.833466] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [233.836492] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [233.836943] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [233.837385] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [233.837870] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:388:pipe C]
<7> [233.838970] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [233.839915] [IGT] kms_plane_scaling: exiting, ret=0
<6> [233.848020] Console: switching to colour frame buffer device 180x56
<7> [233.864923] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [233.865543] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [233.866145] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [233.866620] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [233.867214] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [233.899893] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [233.900444] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [233.900990] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
|