igt@xe_pm@d3hot-multiple-execs on shard-bmg@IGT

Detail	Value
Duration	4.44 seconds
Hostname	shard-bmg-1
Igt-Version	IGT-Version: 2.3-g30ecfbf68 (x86_64) (Linux: 6.19.0-lgci-xe-xe-4572-fc9512d31fa2c190f-debug+ x86_64)
Out	Using IGT_SRANDOM=1771423364 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-multiple-execs Subtest d3hot-multiple-execs: SUCCESS (4.442s)
Err	Starting subtest: d3hot-multiple-execs Subtest d3hot-multiple-execs: SUCCESS (4.442s)
Dmesg	<6> [478.412581] Console: switching to colour dummy device 80x25 <6> [478.412884] [IGT] xe_pm: executing <6> [478.460121] [IGT] xe_pm: starting subtest d3hot-multiple-execs <7> [478.461225] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [478.461473] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [478.461696] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [478.461955] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [478.462196] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [478.462430] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [478.462661] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [478.463075] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [478.463319] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [478.463548] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [478.463812] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [478.464074] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [478.464328] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [478.464574] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [478.464921] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [478.465148] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [478.465380] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [478.465812] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [478.466125] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [478.466593] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [478.466931] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [478.467228] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [478.467521] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [478.467797] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [478.468126] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [478.468350] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [478.468577] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [478.468861] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [478.469052] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [478.469236] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [478.469416] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [478.469599] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [478.469781] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [478.469953] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [478.470122] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [478.470307] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0 <7> [478.470527] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [478.470727] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [478.470954] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [478.471165] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [478.471382] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2 <7> [478.471565] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2 <7> [478.471740] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [478.472016] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [478.472196] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [478.472372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [478.472540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [478.472698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [478.472867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [478.473021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [478.473170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [478.473319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [478.473466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [478.473608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [478.473757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [478.473896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [478.474039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [478.474183] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [478.474321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [478.474455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [478.474579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [478.474702] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [478.474885] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [478.475029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [478.475152] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [478.475263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [478.475373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [478.475483] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [478.475593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [478.475698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [478.475815] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [478.475920] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [478.476022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [478.476122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [478.476221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [478.476320] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [478.476418] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [478.476516] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [478.476612] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [478.476704] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [478.476805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [478.476897] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [478.476987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [478.477077] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [478.477168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [478.477258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [478.477349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [478.477440] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [478.477530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [478.477621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [478.477713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [478.477816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [478.477915] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [478.478010] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000 <7> [478.478104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000 <7> [478.478198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0 <7> [478.478290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100 <7> [478.478383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [478.478475] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.478567] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.478657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.478753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [478.478845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [478.478936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [478.479029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [478.479120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [478.479211] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [478.479304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [478.479395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [478.479486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [478.480293] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A] <7> [478.512524] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [478.532581] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [478.535591] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A] <7> [478.537891] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [478.538595] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [478.539057] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [478.539455] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [478.539862] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [478.540221] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [478.540580] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [478.540969] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [478.541307] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [478.541637] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [478.541964] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [478.542264] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [478.542563] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [478.542870] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [478.543148] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [478.543439] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [478.543707] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [478.545852] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [478.546291] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [478.549291] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [478.549584] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000) <7> [478.549944] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2] <7> [478.550229] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [478.551101] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [478.551374] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [478.551633] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [478.551897] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [478.552126] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [478.552347] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [478.552683] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [478.552922] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [478.553128] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [478.553328] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [478.553535] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [478.553730] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [478.554035] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [478.554221] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [478.554393] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [478.554570] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [478.554737] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [478.554932] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [478.555120] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [478.555255] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [478.555408] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [478.555530] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [478.555651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [478.555783] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [478.555905] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [478.556017] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [478.556143] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0 <7> [478.556283] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [478.556419] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [478.556554] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [478.556691] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [478.556848] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3 <7> [478.556972] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3 <7> [478.557093] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [478.557216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [478.557336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [478.557455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [478.557569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [478.557680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [478.557803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [478.557911] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [478.558018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [478.558125] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [478.558126] xe 0000:03:00.0: colorspace: RGB <7> [478.558128] xe 0000:03:00.0: scan mode: Underscan <7> [478.558129] xe 0000:03:00.0: colorimetry: No Data <7> [478.558130] xe 0000:03:00.0: picture aspect: No Data <7> [478.558131] xe 0000:03:00.0: active aspect: Same as Picture <7> [478.558133] xe 0000:03:00.0: itc: No Data <7> [478.558134] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [478.558135] xe 0000:03:00.0: quantization range: Full <7> [478.558136] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [478.558137] xe 0000:03:00.0: video code: 0 <7> [478.558138] xe 0000:03:00.0: ycc quantization range: Full <7> [478.558139] xe 0000:03:00.0: hdmi content type: Graphics <7> [478.558140] xe 0000:03:00.0: pixel repeat: 0 <7> [478.558142] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [478.558143] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [478.558145] xe 0000:03:00.0: vendor: Intel <7> [478.558146] xe 0000:03:00.0: product: Discrete gfx <7> [478.558147] xe 0000:03:00.0: source device information: PC General (0x9) <7> [478.558148] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [478.558150] xe 0000:03:00.0: empty frame <7> [478.558151] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [478.558258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [478.558363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [478.558464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [478.558561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [478.558655] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [478.558747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [478.558856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [478.558964] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [478.559055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [478.559146] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [478.559237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [478.559328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [478.559418] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [478.559508] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [478.559615] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [478.559705] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [478.559805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [478.559896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [478.559986] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [478.560076] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [478.560167] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [478.560258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [478.560348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [478.560439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [478.560529] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [478.560619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [478.560710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [478.560812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [478.560902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [478.560991] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [478.561082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [478.561178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [478.561269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [478.561359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [478.561451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [478.561541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.561632] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.561721] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.561823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [478.561912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [478.562003] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.562094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.562186] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [478.562274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [478.562363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [478.562452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [478.562543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [478.562635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [478.562730] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [478.562865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [478.562959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [478.563050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [478.563543] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B] <7> [478.583153] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [478.603627] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B] <7> [478.606380] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [478.607212] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [478.607676] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [478.608206] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [478.608682] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [478.609178] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [478.609605] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [478.610074] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [478.610505] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [478.610983] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [478.611364] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [478.611730] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [478.612197] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [478.612572] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [478.612956] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [478.613304] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [478.613629] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [478.614221] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [478.614785] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [478.615293] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [478.616079] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [478.616366] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000) <7> [478.616663] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [478.616981] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3] <7> [478.617238] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [478.641998] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [478.643014] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [478.644005] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [478.644968] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [478.645919] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [478.753339] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [478.754367] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [478.759215] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [478.763644] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [478.764201] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [478.764854] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [478.765538] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [478.769709] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [478.783966] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [478.786218] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [478.788101] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [478.792540] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [478.794069] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [478.803893] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [478.804057] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [478.804210] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [478.810350] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.812255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.814155] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.816136] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.818120] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.820111] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.822104] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.824118] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.828034] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.830042] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.832062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.834088] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.836113] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.838072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.840101] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.842122] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [478.843868] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [478.843879] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [478.843884] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [478.843888] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [478.843891] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [478.843895] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [478.843900] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [478.843905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [478.843909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [478.843930] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [478.844112] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [478.845773] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [478.845952] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [478.848736] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [478.849236] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [478.849362] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [478.849840] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [478.849936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [478.849940] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [478.850027] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [478.851375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [478.851379] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [478.851470] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [478.876405] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [478.876409] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [478.876412] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [478.876414] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [478.876416] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [478.876418] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [478.876422] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [478.876424] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [478.876427] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [478.876796] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [478.876897] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [478.877333] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [478.877419] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [478.877430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [478.881556] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [478.954165] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [478.955199] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [478.956082] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [478.956905] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [478.957725] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [479.079581] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [479.080296] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [479.085356] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [479.089890] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [479.090279] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [479.090850] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [479.091539] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [479.095321] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [479.105998] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [479.107541] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [479.108880] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [479.112177] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [479.113242] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [479.122464] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [479.122661] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [479.122862] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [479.129077] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.131114] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.133083] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.135117] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.137138] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.139162] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.141155] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.143207] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.147407] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.149327] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.151259] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.153251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.155260] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.157255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.159250] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.161215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.162964] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [479.162977] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [479.162982] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [479.162986] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [479.162990] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [479.162995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [479.163001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [479.163006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [479.163011] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [479.163035] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [479.163245] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [479.164875] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [479.165043] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [479.167850] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [479.168343] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [479.168433] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [479.168874] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [479.168962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [479.168966] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [479.169054] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [479.170406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [479.170409] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [479.170497] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [479.195720] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [479.195725] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [479.195727] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [479.195730] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [479.195733] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [479.195735] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [479.195739] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [479.195742] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [479.195745] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [479.195900] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [479.196008] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [479.196444] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [479.196532] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.196544] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [479.200738] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [479.274187] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [479.275186] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [479.276007] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [479.276752] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [479.277545] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [479.334496] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [479.335194] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [479.339794] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [479.344414] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [479.344924] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [479.345520] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [479.346140] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [479.349291] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [479.357433] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [479.359053] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [479.360127] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [479.364115] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [479.365091] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [479.377815] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [479.378272] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [479.378385] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [479.385440] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.387378] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.389353] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.391277] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.393309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.395331] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.397342] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.399286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.403463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.405409] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.407385] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.409325] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.411336] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.413276] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.415328] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.417327] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.419025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [479.419042] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [479.419048] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [479.419054] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [479.419060] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [479.419066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [479.419073] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [479.419080] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [479.419087] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [479.419117] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [479.419382] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [479.421169] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [479.421390] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [479.424290] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [479.424845] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [479.424986] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [479.425428] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [479.425519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [479.425523] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [479.425616] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [479.426974] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [479.426978] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [479.427067] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [479.452056] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [479.452060] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [479.452062] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [479.452064] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [479.452066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [479.452069] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [479.452072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [479.452074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [479.452077] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [479.452441] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [479.452528] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [479.452961] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [479.453054] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.453065] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [479.457194] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [479.530130] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [479.531097] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [479.531855] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [479.532660] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [479.533412] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [479.571887] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [479.572582] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [479.577228] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [479.581754] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [479.582520] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [479.583262] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [479.584308] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [479.588183] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [479.598581] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [479.600435] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [479.602059] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [479.607144] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [479.609072] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [479.620950] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [479.621224] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [479.621478] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [479.628843] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.630879] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.632877] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.634881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.636937] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.638976] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.640993] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.643020] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.647003] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.649031] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.651053] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.653081] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.655109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.657291] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.659323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.661325] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.663053] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [479.663066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [479.663071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [479.663075] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [479.663080] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [479.663084] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [479.663090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [479.663095] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [479.663101] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [479.663124] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [479.663331] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [479.665065] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [479.665317] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [479.668229] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [479.668797] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [479.668943] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [479.669424] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [479.669559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [479.669564] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [479.669699] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [479.671118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [479.671123] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [479.671256] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [479.696256] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [479.696260] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [479.696263] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [479.696265] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [479.696267] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [479.696269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [479.696273] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [479.696275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [479.696278] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [479.696645] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [479.696738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [479.697180] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [479.697313] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.697330] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [479.701556] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [479.770171] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [479.771148] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [479.771956] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [479.772703] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [479.773486] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [479.821368] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [479.822016] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [479.826603] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [479.831156] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [479.831671] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [479.832379] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [479.833135] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [479.836819] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [479.845492] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [479.846459] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [479.847305] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [479.850678] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [479.851881] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [479.860810] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [479.860913] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [479.861044] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [479.867743] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.869706] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.871887] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.873912] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.875982] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.877992] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.880013] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.882071] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.886273] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.888455] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.890384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.892421] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.894416] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.896340] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.898383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.900342] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [479.902147] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [479.902165] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [479.902172] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [479.902178] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [479.902184] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [479.902190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [479.902198] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [479.902205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [479.902213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [479.902245] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [479.902533] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [479.904284] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [479.904515] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [479.907422] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [479.907988] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [479.908100] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [479.908570] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [479.908657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [479.908662] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [479.908748] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [479.910103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [479.910106] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [479.910195] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [479.935399] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [479.935403] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [479.935406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [479.935409] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [479.935412] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [479.935414] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [479.935418] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [479.935421] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [479.935425] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [479.935791] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [479.935882] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [479.936331] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [479.936420] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [479.936431] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [479.940549] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [480.010318] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [480.011246] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [480.012042] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [480.012733] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [480.013473] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [480.060807] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [480.061493] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [480.066318] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [480.071166] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [480.071673] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [480.072533] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [480.073333] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [480.076890] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [480.085796] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [480.087406] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [480.089104] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [480.094310] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [480.096122] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [480.107429] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [480.107667] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [480.107898] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [480.114533] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.116457] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.118383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.120388] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.122343] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.124393] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.126404] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.128370] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.132341] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.134347] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.136406] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.138347] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.140394] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.142378] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.144349] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.146393] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.148173] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [480.148187] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [480.148192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [480.148196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [480.148201] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [480.148205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [480.148211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [480.148217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [480.148222] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [480.148247] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [480.148460] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [480.150150] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [480.150400] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [480.153313] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [480.153901] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [480.154064] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [480.154546] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [480.154682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [480.154688] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [480.154821] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [480.156235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [480.156240] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [480.156370] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [480.181624] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [480.181628] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [480.181630] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [480.181633] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [480.181635] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [480.181637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [480.181640] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [480.181643] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [480.181646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [480.181798] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [480.181894] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [480.182356] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [480.182489] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [480.182506] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [480.186659] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [480.258194] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [480.259197] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [480.259969] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [480.260778] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [480.261589] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [480.305417] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [480.306083] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [480.310669] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [480.315246] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [480.315808] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [480.316526] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [480.317266] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [480.320563] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [480.329331] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [480.332803] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [480.336040] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [480.341791] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [480.343861] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [480.357304] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [480.357665] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [480.357778] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [480.365030] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.367113] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.369070] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.371096] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.373149] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.375207] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.377328] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.379319] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.383504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.385486] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.387954] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.390000] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.392070] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.394196] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.396529] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.398490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.400242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [480.400261] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [480.400268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [480.400275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [480.400281] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [480.400287] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [480.400296] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [480.400304] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [480.400312] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [480.400346] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [480.400568] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [480.402230] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [480.402476] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [480.405435] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [480.406013] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [480.406105] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [480.406547] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [480.406638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [480.406642] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [480.406728] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [480.408080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [480.408083] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [480.408173] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [480.433116] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [480.433119] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [480.433121] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [480.433124] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [480.433126] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [480.433128] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [480.433131] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [480.433134] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [480.433137] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [480.433515] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [480.433604] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [480.434045] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [480.434131] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [480.434142] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [480.438314] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [480.506302] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [480.507300] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [480.508119] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [480.508857] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [480.509642] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [480.546135] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [480.546770] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [480.551409] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [480.555922] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [480.556507] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [480.557497] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [480.558480] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [480.562303] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [480.573173] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [480.574991] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [480.576540] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [480.582126] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [480.584078] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [480.596255] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [480.596523] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [480.596749] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [480.603373] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.605464] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.607458] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.609463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.611467] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.613430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.615479] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.617473] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.621497] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.623483] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.625423] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.627403] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.629371] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.631335] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.633363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.635343] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.637307] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [480.637321] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [480.637327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [480.637332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [480.637337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [480.637342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [480.637349] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [480.637355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [480.637362] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [480.637387] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [480.637630] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [480.639375] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [480.639663] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [480.642609] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [480.643228] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [480.643365] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [480.643851] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [480.643983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [480.643989] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [480.644140] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [480.645551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [480.645556] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [480.645692] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [480.670692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [480.670695] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [480.670698] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [480.670700] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [480.670702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [480.670704] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [480.670708] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [480.670710] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [480.670713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [480.671089] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [480.671243] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [480.671725] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [480.671856] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [480.671873] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [480.676173] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [480.746342] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [480.747362] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [480.748174] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [480.748907] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [480.749697] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [480.791834] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [480.792502] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [480.797152] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [480.801687] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [480.802238] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [480.802875] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [480.803653] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [480.807438] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [480.816661] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [480.818175] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [480.819361] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [480.822541] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [480.823888] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [480.832400] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [480.832860] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [480.833015] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [480.839156] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.841226] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.843141] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.845015] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.847265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.849344] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.851223] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.853150] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.856885] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.858867] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.860861] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.862854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.864848] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.866733] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.868606] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.870482] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [480.872096] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [480.872115] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [480.872123] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [480.872130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [480.872136] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [480.872142] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [480.872151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [480.872159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [480.872167] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [480.872201] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [480.872454] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [480.873884] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [480.874275] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [480.876636] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [480.877199] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [480.877335] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [480.877711] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [480.877840] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [480.877846] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [480.877977] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [480.879285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [480.879290] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [480.879426] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [480.904464] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [480.904468] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [480.904470] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [480.904473] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [480.904475] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [480.904477] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [480.904481] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [480.904483] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [480.904486] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [480.904739] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [480.904833] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [480.905165] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [480.905307] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [480.905324] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [480.909510] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [480.978404] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [480.979300] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [480.979972] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [480.980642] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [480.981307] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [481.037151] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [481.037780] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [481.042440] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [481.046993] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [481.047762] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [481.048540] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [481.049323] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [481.053477] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [481.065307] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [481.066974] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [481.068611] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [481.073603] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [481.075404] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [481.085547] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [481.085771] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [481.085977] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [481.092193] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.094218] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.096235] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.098257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.100282] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.102320] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.104338] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.106360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.110561] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.112543] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.114497] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.116525] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.118525] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.120522] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.122533] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.124536] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.126244] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [481.126257] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [481.126262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [481.126267] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [481.126271] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [481.126276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [481.126284] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [481.126290] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [481.126296] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [481.126318] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [481.126522] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [481.128231] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [481.128481] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [481.131390] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [481.131962] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [481.132095] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [481.132602] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [481.132736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [481.132741] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [481.132872] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [481.134288] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [481.134292] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [481.134384] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [481.159336] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [481.159340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [481.159342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [481.159345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [481.159347] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [481.159349] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [481.159353] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [481.159355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [481.159358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [481.159725] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [481.159819] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [481.160256] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [481.160389] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [481.160406] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [481.164563] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [481.234507] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [481.235483] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [481.236309] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [481.237084] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [481.237886] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [481.285701] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [481.286430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [481.291031] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [481.295857] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [481.296553] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [481.297348] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [481.298099] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [481.301664] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [481.309922] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [481.311773] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [481.313456] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [481.316849] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [481.318263] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [481.326632] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [481.327065] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [481.327252] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [481.333307] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.335210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.336993] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.339000] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.341061] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.342932] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.345109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.347187] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.350940] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.352965] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.354995] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.356854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.358845] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.360900] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.362906] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.364929] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.366696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [481.366715] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [481.366724] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [481.366733] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [481.366742] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [481.366751] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [481.366763] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [481.366774] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [481.366786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [481.366831] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [481.367111] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [481.368544] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [481.368873] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [481.371363] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [481.371955] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [481.372047] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [481.372382] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [481.372471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [481.372476] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [481.372563] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [481.373802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [481.373805] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [481.373891] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [481.398942] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [481.398946] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [481.398948] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [481.398950] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [481.398952] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [481.398955] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [481.398958] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [481.398961] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [481.398963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [481.399126] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [481.399230] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [481.399566] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [481.399653] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [481.399664] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [481.403834] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [481.474356] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [481.475076] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [481.475786] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [481.476488] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [481.477110] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [481.532638] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [481.533291] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [481.538216] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [481.542859] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [481.543463] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [481.544358] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [481.545268] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [481.549453] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [481.559881] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [481.562082] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [481.563633] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [481.567237] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [481.568266] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [481.578831] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [481.579217] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [481.579365] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [481.587240] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.589335] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.592106] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.594423] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.596938] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.599206] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.601324] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.603402] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.607729] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.609777] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.611811] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.613766] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.615710] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.617660] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.619617] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.621607] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.623353] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [481.623370] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [481.623378] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [481.623385] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [481.623391] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [481.623397] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [481.623406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [481.623414] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [481.623422] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [481.623454] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [481.623760] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [481.625464] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [481.625706] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [481.628632] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [481.629185] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [481.629301] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [481.629741] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [481.629834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [481.629837] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [481.629927] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [481.631286] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [481.631290] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [481.631380] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [481.656840] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [481.656844] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [481.656846] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [481.656849] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [481.656851] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [481.656853] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [481.656857] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [481.656859] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [481.656862] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [481.657224] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [481.657319] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [481.657748] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [481.657835] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [481.657846] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [481.662055] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [481.730510] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [481.731486] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [481.732364] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [481.733126] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [481.733908] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [481.819907] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [481.820636] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [481.825229] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [481.829780] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [481.830333] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [481.830924] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [481.831736] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [481.835135] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [481.843919] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [481.845537] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [481.846617] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [481.849781] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [481.850770] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [481.860237] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [481.860498] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [481.860727] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [481.866592] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.868593] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.870638] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.872647] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.874660] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.876672] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.878668] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.880685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.884669] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.886661] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.888675] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.890668] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.892692] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.894706] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.896719] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.898697] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [481.900517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [481.900544] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [481.900556] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [481.900566] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [481.900576] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [481.900586] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [481.900599] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [481.900612] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [481.900624] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [481.900675] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [481.900936] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [481.902418] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [481.902804] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [481.905323] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [481.905892] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [481.905983] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [481.906311] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [481.906404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [481.906408] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [481.906497] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [481.907734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [481.907737] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [481.907826] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [481.932675] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [481.932679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [481.932681] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [481.932683] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [481.932686] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [481.932688] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [481.932691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [481.932694] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [481.932697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [481.932954] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [481.933049] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [481.933377] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [481.933466] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [481.933478] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [481.937709] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [482.010585] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [482.011449] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [482.012117] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [482.012830] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [482.013501] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [482.062197] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [482.062892] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [482.067590] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [482.072147] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [482.073095] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [482.073905] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [482.074836] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [482.078394] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.089127] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [482.090809] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.092727] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [482.098326] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [482.100323] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [482.112481] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [482.112771] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [482.112977] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [482.119573] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.121540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.123520] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.125542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.127595] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.129648] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.131679] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.133626] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.137685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.139657] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.141669] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.143676] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.145673] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.147686] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.149647] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.151691] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.153431] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [482.153445] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [482.153452] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [482.153457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [482.153461] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [482.153467] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [482.153473] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [482.153480] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [482.153486] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [482.153512] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [482.153755] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [482.155528] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [482.155818] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [482.158760] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [482.159356] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [482.159489] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [482.159971] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [482.160105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [482.160111] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [482.160241] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [482.161680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [482.161686] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [482.161815] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [482.186816] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [482.186819] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [482.186821] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [482.186824] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [482.186826] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [482.186828] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [482.186832] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [482.186834] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [482.186837] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [482.187204] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [482.187314] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [482.187819] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [482.187947] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [482.187964] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [482.192136] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [482.266564] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [482.267681] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [482.268623] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [482.269599] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [482.270568] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [482.340313] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [482.340976] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [482.345691] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [482.350243] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [482.350721] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [482.351317] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [482.351846] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [482.354886] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.362845] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [482.363995] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.364919] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [482.367564] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [482.368504] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [482.375419] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [482.375523] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [482.375617] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [482.380083] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.381902] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.383770] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.385626] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.387454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.389309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.391150] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.393020] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.396583] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.398440] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.400275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.402143] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.404019] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.406015] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.407842] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.409697] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.411306] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [482.411327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [482.411338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [482.411345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [482.411351] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [482.411357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [482.411365] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [482.411372] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [482.411379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [482.411409] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [482.411684] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [482.413120] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [482.413377] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [482.415616] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [482.416081] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [482.416187] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [482.416520] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [482.416610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [482.416615] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [482.416705] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [482.417954] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [482.417958] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [482.418047] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [482.443025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [482.443029] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [482.443031] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [482.443034] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [482.443036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [482.443038] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [482.443041] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [482.443044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [482.443047] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [482.443299] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [482.443426] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [482.443767] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [482.443853] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [482.443864] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [482.447977] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [482.522619] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [482.523506] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [482.524182] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [482.524866] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [482.525484] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [482.581289] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000 <7> [482.581966] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000 <7> [482.582584] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [482.583137] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A] <7> [482.583722] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [482.584260] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset <7> [482.584821] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2 <7> [482.585420] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [482.586129] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [482.586614] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [482.587111] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [482.587557] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [482.587984] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [482.588052] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [482.588120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [482.588188] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [482.588267] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1 <7> [482.588369] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [482.588463] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [482.588549] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [482.588646] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [482.588747] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2 <7> [482.588836] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2 <7> [482.588923] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset] <7> [482.589014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [482.589104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [482.589194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [482.589279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [482.589372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [482.589457] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [482.589541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [482.589624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [482.589708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [482.589793] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [482.589876] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [482.589958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [482.590040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [482.590123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [482.590205] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [482.590286] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [482.590375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [482.590456] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [482.590538] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [482.590620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [482.590701] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [482.590783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [482.590868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [482.590952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [482.591035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [482.591119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [482.591202] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [482.591284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [482.591384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [482.591475] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [482.591558] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [482.591641] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [482.591723] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [482.591804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [482.591886] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [482.591969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [482.592054] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [482.592137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [482.592220] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [482.592303] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [482.592400] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [482.592485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [482.592568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [482.592654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [482.592741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [482.592825] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [482.592910] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [482.592993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [482.593080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [482.593166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [482.593251] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000 <7> [482.593343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000 <7> [482.593427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0 <7> [482.593510] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100 <7> [482.593593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [482.593674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.593758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.593841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.593922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [482.594008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [482.594091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [482.594172] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [482.594260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [482.594354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no <7> [482.594439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no <7> [482.594523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no <7> [482.594607] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no <7> [482.594692] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no <7> [482.595359] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [482.595686] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [482.595805] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [482.596141] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000) <7> [482.596231] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [482.596579] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [482.596662] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [482.596743] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [482.596822] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [482.596900] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [482.596980] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [482.597057] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [482.597132] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [482.597209] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [482.597287] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [482.597372] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [482.597448] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [482.597524] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [482.597599] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [482.597675] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [482.597751] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [482.598038] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [482.598195] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [482.598477] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [482.598579] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A] <7> [482.598668] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [482.601263] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [482.606189] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.615669] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [482.617276] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.617718] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [482.619227] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [482.619787] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [482.627862] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [482.628101] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [482.636388] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [482.636801] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [482.638224] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [482.656152] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD <7> [482.672787] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2] <7> [482.673692] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A] <7> [482.678296] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1] <7> [482.682977] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1] <7> [482.687375] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2] <7> [482.690439] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.704874] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [482.707082] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [482.708997] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [482.714492] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [482.716244] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [482.725914] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [482.726105] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [482.726294] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [482.733741] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.735695] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.737720] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.738412] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [482.738825] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [482.741707] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.743739] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.745734] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.747752] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.749753] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.753783] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.755636] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.757693] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.759728] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.761744] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.763724] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.765765] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.767780] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [482.769494] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [482.769511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30. <7> [482.769517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36. <7> [482.769523] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48. <7> [482.769529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [482.769534] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color. <7> [482.769542] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435 <7> [482.769549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [482.769556] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3 <7> [482.769585] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no <7> [482.769858] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [482.771574] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [482.771789] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [482.774654] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2] <7> [482.775208] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [482.775300] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [482.775755] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [482.775848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [482.775853] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [482.775942] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [482.777291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [482.777295] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [482.777397] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3] <7> [482.802897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz <7> [482.802901] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30. <7> [482.802903] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36. <7> [482.802905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc. <7> [482.802907] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [482.802909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no <7> [482.802912] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850 <7> [482.802914] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [482.802917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1 <7> [482.803291] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [482.803385] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [482.803807] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [482.803885] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [482.803895] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3] <7> [482.808000] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4] <7> [482.812455] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [482.812552] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [482.812646] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [482.812740] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [482.812832] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [482.812924] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [482.813070] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [482.813166] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [482.813259] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [482.813359] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [482.813452] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [482.813543] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [482.813677] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [482.813770] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [482.813860] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [482.813949] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [482.814038] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [482.814126] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [482.814233] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [482.814315] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [482.814398] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [482.814539] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [482.814627] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [482.814716] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B] <7> [482.814808] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [482.814899] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset <7> [482.814987] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3 <7> [482.815087] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [482.815166] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [482.815236] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [482.815328] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [482.815417] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [482.815491] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [482.815560] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [482.815626] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [482.815693] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [482.815759] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [482.815824] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [482.815900] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1 <7> [482.815990] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [482.816079] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [482.816169] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [482.816268] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [482.816373] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3 <7> [482.816459] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3 <7> [482.816542] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset] <7> [482.816633] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [482.816738] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [482.816829] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [482.816917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [482.817002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [482.817087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [482.817171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [482.817254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [482.817343] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [482.817345] xe 0000:03:00.0: colorspace: RGB <7> [482.817346] xe 0000:03:00.0: scan mode: Underscan <7> [482.817347] xe 0000:03:00.0: colorimetry: No Data <7> [482.817348] xe 0000:03:00.0: picture aspect: No Data <7> [482.817349] xe 0000:03:00.0: active aspect: Same as Picture <7> [482.817350] xe 0000:03:00.0: itc: No Data <7> [482.817351] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [482.817352] xe 0000:03:00.0: quantization range: Full <7> [482.817353] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [482.817354] xe 0000:03:00.0: video code: 0 <7> [482.817355] xe 0000:03:00.0: ycc quantization range: Full <7> [482.817356] xe 0000:03:00.0: hdmi content type: Graphics <7> [482.817357] xe 0000:03:00.0: pixel repeat: 0 <7> [482.817358] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [482.817359] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [482.817361] xe 0000:03:00.0: vendor: Intel <7> [482.817362] xe 0000:03:00.0: product: Discrete gfx <7> [482.817363] xe 0000:03:00.0: source device information: PC General (0x9) <7> [482.817364] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [482.817365] xe 0000:03:00.0: empty frame <7> [482.817366] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00 <7> [482.817452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00 <7> [482.817537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [482.817621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [482.817705] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37 <7> [482.817788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [482.817871] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [482.817956] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [482.818042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9 <7> [482.818125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [482.818209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9 <7> [482.818293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9 <7> [482.818382] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [482.818464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [482.818548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [482.818630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [482.818712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [482.818795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [482.818883] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: <7> [482.818967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [482.819050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [482.819134] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [482.819218] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [482.819301] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [482.819392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [482.819480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [482.819562] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [482.819645] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [482.819728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [482.819811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [482.819896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [482.819979] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [482.820062] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [482.820146] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [482.820230] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [482.820313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [482.820408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.820496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.820578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.820661] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [482.820745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [482.820831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.820922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.821013] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [482.821103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [482.821193] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [482.821284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [482.821383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [482.821468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [482.821551] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no <7> [482.821635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no <7> [482.821725] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no <7> [482.821816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no <7> [482.821907] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no <7> [482.822463] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [482.822605] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000) <7> [482.822911] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F] <7> [482.822992] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A] <7> [482.823073] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B] <7> [482.823151] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C] <7> [482.823227] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D] <7> [482.823302] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G] <7> [482.823391] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A] <7> [482.823476] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B] <7> [482.823557] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C] <7> [482.823638] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D] <7> [482.823718] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H] <7> [482.823799] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I] <7> [482.823879] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A] <7> [482.823959] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B] <7> [482.824039] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C] <7> [482.824119] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D] <7> [482.838960] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [482.839241] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [482.855653] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B] <7> [482.855906] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [482.859010] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [482.877891] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 32 bytes ELD <7> [482.882532] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [482.894781] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [482.895457] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [482.896430] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3] <7> [482.897163] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <6> [482.903875] [IGT] xe_pm: finished subtest d3hot-multiple-execs, SUCCESS <7> [482.923613] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [482.924955] [IGT] xe_pm: exiting, ret=0 <6> [482.945888] Console: switching to colour frame buffer device 240x67

<6> [478.412581] Console: switching to colour dummy device 80x25

<6> [478.460121] [IGT] xe_pm: starting subtest d3hot-multiple-execs

<7> [478.461225] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [478.461473] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [478.461696] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [478.461955] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [478.462196] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [478.462430] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [478.462661] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [478.463075] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [478.463319] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [478.463548] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [478.463812] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [478.464074] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [478.464328] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [478.464574] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [478.464921] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [478.465148] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [478.465380] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [478.465812] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [478.466125] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [478.466593] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [478.466931] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [478.467228] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [478.467521] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [478.467797] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [478.468126] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [478.468350] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [478.468577] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [478.468861] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [478.469052] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [478.469236] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [478.469416] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [478.469599] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [478.469781] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [478.469953] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [478.470122] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [478.470307] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 0 num active planes 0

<7> [478.470527] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [478.470727] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [478.470954] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [478.471165] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [478.471382] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2

<7> [478.471565] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2

<7> [478.471740] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [478.472016] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [478.472196] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [478.472372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [478.472540] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [478.472698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [478.472867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [478.473021] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [478.473170] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [478.473319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [478.473466] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [478.473608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [478.473757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [478.473896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [478.474039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [478.474183] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [478.474321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [478.474455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [478.474579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [478.474702] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [478.474885] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [478.475029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [478.475152] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [478.475263] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [478.475373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [478.475483] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [478.475593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [478.475698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [478.475815] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [478.475920] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [478.476022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [478.476122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [478.476221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [478.476320] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [478.476418] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [478.476516] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [478.476612] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [478.476704] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [478.476805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [478.476897] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [478.476987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [478.477077] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [478.477168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [478.477258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [478.477349] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [478.477440] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [478.477530] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [478.477621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [478.477713] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [478.477816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [478.477915] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [478.478010] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000

<7> [478.478104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000

<7> [478.478198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0

<7> [478.478290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100

<7> [478.478383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [478.478475] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.478567] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.478657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.478753] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [478.478845] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [478.478936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [478.479029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [478.479120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [478.479211] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [478.479304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [478.479395] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [478.479486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [478.480293] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Disable audio codec on [CRTC:150:pipe A]

<7> [478.512524] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [478.532581] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [478.535591] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:150:pipe A]

<7> [478.537891] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [478.538595] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [478.539057] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [478.539455] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [478.539862] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [478.540221] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [478.540580] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [478.540969] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [478.541307] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [478.541637] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [478.541964] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [478.542264] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [478.542563] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [478.542870] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [478.543148] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [478.543439] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [478.543707] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [478.545852] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [478.546291] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [478.549291] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [478.549584] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa2000000)

<7> [478.549944] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]

<7> [478.550229] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [478.551101] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [478.551374] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [478.551633] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [478.551897] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [478.552126] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [478.552347] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [478.552683] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [478.552922] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [478.553128] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [478.553328] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [478.553535] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [478.553730] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [478.554035] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [478.554221] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [478.554393] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [478.554570] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [478.554737] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [478.554932] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [478.555120] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [478.555255] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [478.555408] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [478.555530] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [478.555651] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [478.555783] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [478.555905] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [478.556017] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [478.556143] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0

<7> [478.556283] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [478.556419] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [478.556554] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [478.556691] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [478.556848] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3

<7> [478.556972] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3

<7> [478.557093] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [478.557216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [478.557336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [478.557455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [478.557569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [478.557680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [478.557803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [478.557911] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [478.558018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [478.558125] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [478.558128] xe 0000:03:00.0: scan mode: Underscan

<7> [478.558129] xe 0000:03:00.0: colorimetry: No Data

<7> [478.558130] xe 0000:03:00.0: picture aspect: No Data

<7> [478.558131] xe 0000:03:00.0: active aspect: Same as Picture

<7> [478.558134] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [478.558135] xe 0000:03:00.0: quantization range: Full

<7> [478.558136] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [478.558138] xe 0000:03:00.0: ycc quantization range: Full

<7> [478.558139] xe 0000:03:00.0: hdmi content type: Graphics

<7> [478.558142] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [478.558143] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [478.558146] xe 0000:03:00.0: product: Discrete gfx

<7> [478.558147] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [478.558148] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [478.558151] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [478.558258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [478.558363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [478.558464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [478.558561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [478.558655] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [478.558747] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [478.558856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [478.558964] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [478.559055] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [478.559146] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [478.559237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [478.559328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [478.559418] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [478.559508] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [478.559615] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [478.559705] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [478.559805] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [478.559896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [478.559986] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [478.560076] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [478.560167] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [478.560258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [478.560348] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [478.560439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [478.560529] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [478.560619] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [478.560710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [478.560812] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [478.560902] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [478.560991] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [478.561082] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [478.561178] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [478.561269] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [478.561359] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [478.561451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [478.561541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.561632] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.561721] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.561823] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [478.561912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [478.562003] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.562094] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.562186] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [478.562274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [478.562363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [478.562452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [478.562543] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [478.562635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [478.562730] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [478.562865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [478.562959] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [478.563050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [478.563543] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Disable audio codec on [CRTC:268:pipe B]

<7> [478.583153] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [478.603627] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:268:pipe B]

<7> [478.606380] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [478.607212] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [478.607676] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [478.608206] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [478.608682] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [478.609178] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [478.609605] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [478.610074] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [478.610505] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [478.610983] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [478.611364] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [478.611730] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [478.612197] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [478.612572] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [478.612956] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [478.613304] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [478.613629] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [478.614221] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [478.614785] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [478.615293] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [478.616079] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [478.616366] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000)

<7> [478.616663] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [478.616981] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [478.617238] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [478.641998] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [478.643014] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [478.644005] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [478.644968] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [478.645919] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [478.753339] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [478.754367] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [478.759215] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [478.763644] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [478.764201] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [478.764854] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [478.765538] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [478.769709] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [478.783966] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [478.786218] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [478.788101] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [478.792540] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [478.794069] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [478.803893] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [478.804057] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [478.804210] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [478.810350] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.812255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.814155] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.816136] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.818120] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.820111] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.822104] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.824118] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.828034] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.830042] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.832062] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.834088] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.836113] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.838072] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.840101] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.842122] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [478.843868] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [478.843879] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [478.843884] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [478.843888] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [478.843891] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [478.843895] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [478.843900] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [478.843905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [478.843909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [478.843930] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [478.844112] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [478.845773] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [478.845952] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [478.848736] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [478.849236] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [478.849362] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [478.849840] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [478.849936] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [478.849940] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [478.850027] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [478.851375] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [478.851379] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [478.851470] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [478.876405] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [478.876409] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [478.876412] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [478.876414] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [478.876416] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [478.876418] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [478.876422] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [478.876424] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [478.876427] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [478.876796] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [478.876897] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [478.877333] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [478.877419] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [478.877430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [478.881556] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [478.954165] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [478.955199] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [478.956082] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [478.956905] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [478.957725] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [479.079581] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [479.080296] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [479.085356] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [479.089890] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [479.090279] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [479.090850] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [479.091539] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [479.095321] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [479.105998] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [479.107541] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [479.108880] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [479.112177] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [479.113242] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [479.122464] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [479.122661] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [479.122862] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [479.129077] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.131114] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.133083] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.135117] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.137138] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.139162] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.141155] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.143207] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.147407] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.149327] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.151259] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.153251] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.155260] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.157255] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.159250] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.161215] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.162964] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [479.162977] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [479.162982] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [479.162986] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [479.162990] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [479.162995] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [479.163001] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [479.163006] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [479.163011] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [479.163035] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [479.163245] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [479.164875] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [479.165043] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [479.167850] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [479.168343] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [479.168433] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [479.168874] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [479.168962] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [479.168966] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [479.169054] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [479.170406] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [479.170409] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [479.170497] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [479.195720] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [479.195725] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [479.195727] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [479.195730] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [479.195733] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [479.195735] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [479.195739] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [479.195742] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [479.195745] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [479.195900] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [479.196008] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [479.196444] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [479.196532] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.196544] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [479.200738] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [479.274187] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [479.275186] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [479.276007] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [479.276752] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [479.277545] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [479.334496] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [479.335194] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [479.339794] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [479.344414] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [479.344924] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [479.345520] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [479.346140] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [479.349291] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [479.357433] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [479.359053] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [479.360127] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [479.364115] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [479.365091] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [479.377815] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [479.378272] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [479.378385] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [479.385440] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.387378] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.389353] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.391277] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.393309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.395331] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.397342] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.399286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.403463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.405409] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.407385] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.409325] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.411336] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.413276] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.415328] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.417327] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.419025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [479.419042] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [479.419048] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [479.419054] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [479.419060] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [479.419066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [479.419073] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [479.419080] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [479.419087] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [479.419117] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [479.419382] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [479.421169] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [479.421390] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [479.424290] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [479.424845] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [479.424986] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [479.425428] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [479.425519] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [479.425523] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [479.425616] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [479.426974] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [479.426978] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [479.427067] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [479.452056] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [479.452060] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [479.452062] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [479.452064] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [479.452066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [479.452069] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [479.452072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [479.452074] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [479.452077] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [479.452441] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [479.452528] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [479.452961] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [479.453054] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.453065] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [479.457194] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [479.530130] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [479.531097] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [479.531855] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [479.532660] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [479.533412] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [479.571887] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [479.572582] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [479.577228] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [479.581754] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [479.582520] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [479.583262] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [479.584308] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [479.588183] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [479.598581] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [479.600435] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [479.602059] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [479.607144] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [479.609072] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [479.620950] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [479.621224] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [479.621478] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [479.628843] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.630879] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.632877] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.634881] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.636937] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.638976] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.640993] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.643020] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.647003] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.649031] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.651053] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.653081] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.655109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.657291] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.659323] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.661325] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.663053] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [479.663066] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [479.663071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [479.663075] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [479.663080] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [479.663084] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [479.663090] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [479.663095] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [479.663101] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [479.663124] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [479.663331] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [479.665065] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [479.665317] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [479.668229] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [479.668797] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [479.668943] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [479.669424] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [479.669559] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [479.669564] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [479.669699] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [479.671118] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [479.671123] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [479.671256] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [479.696256] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [479.696260] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [479.696263] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [479.696265] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [479.696267] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [479.696269] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [479.696273] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [479.696275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [479.696278] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [479.696645] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [479.696738] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [479.697180] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [479.697313] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.697330] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [479.701556] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [479.770171] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [479.771148] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [479.771956] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [479.772703] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [479.773486] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [479.821368] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [479.822016] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [479.826603] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [479.831156] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [479.831671] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [479.832379] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [479.833135] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [479.836819] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [479.845492] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [479.846459] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [479.847305] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [479.850678] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [479.851881] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [479.860810] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [479.860913] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [479.861044] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [479.867743] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.869706] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.871887] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.873912] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.875982] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.877992] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.880013] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.882071] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.886273] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.888455] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.890384] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.892421] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.894416] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.896340] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.898383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.900342] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [479.902147] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [479.902165] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [479.902172] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [479.902178] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [479.902184] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [479.902190] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [479.902198] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [479.902205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [479.902213] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [479.902245] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [479.902533] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [479.904284] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [479.904515] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [479.907422] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [479.907988] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [479.908100] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [479.908570] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [479.908657] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [479.908662] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [479.908748] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [479.910103] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [479.910106] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [479.910195] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [479.935399] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [479.935403] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [479.935406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [479.935409] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [479.935412] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [479.935414] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [479.935418] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [479.935421] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [479.935425] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [479.935791] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [479.935882] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [479.936331] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [479.936420] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [479.936431] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [479.940549] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [480.010318] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [480.011246] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [480.012042] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [480.012733] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [480.013473] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [480.060807] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [480.061493] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [480.066318] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [480.071166] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [480.071673] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [480.072533] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [480.073333] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [480.076890] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [480.085796] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [480.087406] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [480.089104] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [480.094310] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [480.096122] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [480.107429] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [480.107667] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [480.107898] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [480.114533] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.116457] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.118383] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.120388] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.122343] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.124393] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.126404] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.128370] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.132341] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.134347] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.136406] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.138347] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.140394] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.142378] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.144349] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.146393] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.148173] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [480.148187] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [480.148192] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [480.148196] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [480.148201] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [480.148205] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [480.148211] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [480.148217] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [480.148222] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [480.148247] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [480.148460] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [480.150150] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [480.150400] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [480.153313] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [480.153901] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [480.154064] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [480.154546] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [480.154682] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [480.154688] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [480.154821] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [480.156235] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [480.156240] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [480.156370] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [480.181624] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [480.181628] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [480.181630] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [480.181633] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [480.181635] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [480.181637] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [480.181640] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [480.181643] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [480.181646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [480.181798] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [480.181894] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [480.182356] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [480.182489] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [480.182506] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [480.186659] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [480.258194] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [480.259197] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [480.259969] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [480.260778] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [480.261589] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [480.305417] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [480.306083] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [480.310669] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [480.315246] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [480.315808] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [480.316526] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [480.317266] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [480.320563] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [480.329331] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [480.332803] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [480.336040] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [480.341791] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [480.343861] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [480.357304] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [480.357665] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [480.357778] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [480.365030] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.367113] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.369070] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.371096] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.373149] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.375207] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.377328] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.379319] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.383504] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.385486] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.387954] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.390000] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.392070] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.394196] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.396529] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.398490] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.400242] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [480.400261] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [480.400268] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [480.400275] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [480.400281] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [480.400287] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [480.400296] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [480.400304] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [480.400312] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [480.400346] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [480.400568] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [480.402230] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [480.402476] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [480.405435] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [480.406013] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [480.406105] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [480.406547] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [480.406638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [480.406642] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [480.406728] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [480.408080] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [480.408083] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [480.408173] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [480.433116] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [480.433119] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [480.433121] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [480.433124] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [480.433126] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [480.433128] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [480.433131] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [480.433134] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [480.433137] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [480.433515] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [480.433604] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [480.434045] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [480.434131] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [480.434142] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [480.438314] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [480.506302] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [480.507300] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [480.508119] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [480.508857] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [480.509642] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [480.546135] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [480.546770] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [480.551409] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [480.555922] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [480.556507] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [480.557497] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [480.558480] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [480.562303] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [480.573173] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [480.574991] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [480.576540] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [480.582126] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [480.584078] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [480.596255] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [480.596523] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [480.596749] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [480.603373] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.605464] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.607458] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.609463] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.611467] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.613430] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.615479] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.617473] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.621497] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.623483] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.625423] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.627403] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.629371] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.631335] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.633363] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.635343] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.637307] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [480.637321] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [480.637327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [480.637332] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [480.637337] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [480.637342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [480.637349] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [480.637355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [480.637362] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [480.637387] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [480.637630] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [480.639375] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [480.639663] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [480.642609] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [480.643228] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [480.643365] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [480.643851] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [480.643983] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [480.643989] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [480.644140] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [480.645551] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [480.645556] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [480.645692] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [480.670692] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [480.670695] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [480.670698] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [480.670700] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [480.670702] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [480.670704] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [480.670708] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [480.670710] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [480.670713] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [480.671089] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [480.671243] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [480.671725] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [480.671856] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [480.671873] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [480.676173] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [480.746342] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [480.747362] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [480.748174] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [480.748907] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [480.749697] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [480.791834] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [480.792502] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [480.797152] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [480.801687] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [480.802238] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [480.802875] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [480.803653] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [480.807438] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [480.816661] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [480.818175] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [480.819361] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [480.822541] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [480.823888] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [480.832400] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [480.832860] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [480.833015] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [480.839156] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.841226] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.843141] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.845015] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.847265] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.849344] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.851223] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.853150] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.856885] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.858867] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.860861] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.862854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.864848] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.866733] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.868606] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.870482] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [480.872096] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [480.872115] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [480.872123] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [480.872130] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [480.872136] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [480.872142] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [480.872151] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [480.872159] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [480.872167] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [480.872201] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [480.872454] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [480.873884] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [480.874275] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [480.876636] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [480.877199] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [480.877335] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [480.877711] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [480.877840] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [480.877846] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [480.877977] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [480.879285] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [480.879290] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [480.879426] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [480.904464] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [480.904468] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [480.904470] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [480.904473] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [480.904475] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [480.904477] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [480.904481] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [480.904483] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [480.904486] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [480.904739] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [480.904833] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [480.905165] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [480.905307] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [480.905324] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [480.909510] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [480.978404] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [480.979300] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [480.979972] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [480.980642] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [480.981307] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [481.037151] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [481.037780] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [481.042440] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [481.046993] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [481.047762] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [481.048540] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [481.049323] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [481.053477] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [481.065307] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [481.066974] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [481.068611] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [481.073603] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [481.075404] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [481.085547] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [481.085771] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [481.085977] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [481.092193] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.094218] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.096235] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.098257] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.100282] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.102320] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.104338] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.106360] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.110561] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.112543] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.114497] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.116525] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.118525] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.120522] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.122533] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.124536] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.126244] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [481.126257] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [481.126262] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [481.126267] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [481.126271] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [481.126276] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [481.126284] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [481.126290] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [481.126296] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [481.126318] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [481.126522] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [481.128231] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [481.128481] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [481.131390] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [481.131962] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [481.132095] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [481.132602] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [481.132736] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [481.132741] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [481.132872] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [481.134288] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [481.134292] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [481.134384] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [481.159336] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [481.159340] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [481.159342] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [481.159345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [481.159347] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [481.159349] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [481.159353] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [481.159355] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [481.159358] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [481.159725] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [481.159819] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [481.160256] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [481.160389] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [481.160406] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [481.164563] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [481.234507] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [481.235483] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [481.236309] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [481.237084] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [481.237886] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [481.285701] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [481.286430] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [481.291031] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [481.295857] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [481.296553] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [481.297348] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [481.298099] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [481.301664] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [481.309922] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [481.311773] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [481.313456] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [481.316849] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [481.318263] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [481.326632] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [481.327065] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [481.327252] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [481.333307] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.335210] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.336993] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.339000] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.341061] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.342932] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.345109] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.347187] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.350940] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.352965] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.354995] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.356854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.358845] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.360900] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.362906] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.364929] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.366696] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [481.366715] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [481.366724] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [481.366733] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [481.366742] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [481.366751] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [481.366763] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [481.366774] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [481.366786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [481.366831] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [481.367111] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [481.368544] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [481.368873] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [481.371363] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [481.371955] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [481.372047] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [481.372382] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [481.372471] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [481.372476] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [481.372563] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [481.373802] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [481.373805] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [481.373891] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [481.398942] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [481.398946] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [481.398948] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [481.398950] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [481.398952] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [481.398955] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [481.398958] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [481.398961] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [481.398963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [481.399126] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [481.399230] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [481.399566] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [481.399653] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [481.399664] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [481.403834] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [481.474356] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [481.475076] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [481.475786] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [481.476488] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [481.477110] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [481.532638] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [481.533291] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [481.538216] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [481.542859] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [481.543463] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [481.544358] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [481.545268] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [481.549453] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [481.559881] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [481.562082] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [481.563633] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [481.567237] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [481.568266] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [481.578831] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [481.579217] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [481.579365] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [481.587240] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.589335] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.592106] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.594423] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.596938] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.599206] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.601324] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.603402] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.607729] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.609777] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.611811] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.613766] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.615710] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.617660] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.619617] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.621607] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.623353] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [481.623370] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [481.623378] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [481.623385] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [481.623391] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [481.623397] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [481.623406] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [481.623414] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [481.623422] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [481.623454] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [481.623760] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [481.625464] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [481.625706] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [481.628632] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [481.629185] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [481.629301] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [481.629741] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [481.629834] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [481.629837] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [481.629927] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [481.631286] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [481.631290] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [481.631380] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [481.656840] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [481.656844] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [481.656846] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [481.656849] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [481.656851] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [481.656853] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [481.656857] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [481.656859] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [481.656862] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [481.657224] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [481.657319] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [481.657748] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [481.657835] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [481.657846] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [481.662055] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [481.730510] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [481.731486] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [481.732364] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [481.733126] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [481.733908] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [481.819907] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [481.820636] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [481.825229] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [481.829780] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [481.830333] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [481.830924] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [481.831736] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [481.835135] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [481.843919] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [481.845537] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [481.846617] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [481.849781] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [481.850770] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [481.860237] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [481.860498] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [481.860727] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [481.866592] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.868593] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.870638] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.872647] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.874660] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.876672] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.878668] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.880685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.884669] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.886661] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.888675] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.890668] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.892692] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.894706] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.896719] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.898697] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [481.900517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [481.900544] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [481.900556] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [481.900566] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [481.900576] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [481.900586] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [481.900599] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [481.900612] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [481.900624] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [481.900675] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [481.900936] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [481.902418] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [481.902804] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [481.905323] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [481.905892] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [481.905983] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [481.906311] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [481.906404] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [481.906408] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [481.906497] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [481.907734] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [481.907737] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [481.907826] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [481.932675] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [481.932679] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [481.932681] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [481.932683] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [481.932686] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [481.932688] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [481.932691] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [481.932694] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [481.932697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [481.932954] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [481.933049] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [481.933377] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [481.933466] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [481.933478] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [481.937709] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [482.010585] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [482.011449] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [482.012117] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [482.012830] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [482.013501] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [482.062197] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [482.062892] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [482.067590] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [482.072147] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [482.073095] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [482.073905] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [482.074836] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [482.078394] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.089127] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [482.090809] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.092727] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [482.098326] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [482.100323] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [482.112481] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [482.112771] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [482.112977] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [482.119573] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.121540] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.123520] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.125542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.127595] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.129648] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.131679] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.133626] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.137685] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.139657] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.141669] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.143676] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.145673] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.147686] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.149647] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.151691] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.153431] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [482.153445] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [482.153452] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [482.153457] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [482.153461] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [482.153467] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [482.153473] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [482.153480] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [482.153486] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [482.153512] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [482.153755] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [482.155528] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [482.155818] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [482.158760] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [482.159356] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [482.159489] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [482.159971] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [482.160105] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [482.160111] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [482.160241] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [482.161680] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [482.161686] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [482.161815] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [482.186816] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [482.186819] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [482.186821] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [482.186824] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [482.186826] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [482.186828] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [482.186832] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [482.186834] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [482.186837] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [482.187204] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [482.187314] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [482.187819] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [482.187947] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [482.187964] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [482.192136] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [482.266564] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [482.267681] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [482.268623] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [482.269599] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [482.270568] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [482.340313] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [482.340976] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [482.345691] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [482.350243] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [482.350721] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [482.351317] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [482.351846] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [482.354886] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.362845] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [482.363995] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.364919] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [482.367564] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [482.368504] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [482.375419] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [482.375523] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [482.375617] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [482.380083] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.381902] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.383770] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.385626] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.387454] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.389309] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.391150] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.393020] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.396583] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.398440] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.400275] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.402143] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.404019] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.406015] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.407842] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.409697] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.411306] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [482.411327] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [482.411338] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [482.411345] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [482.411351] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [482.411357] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [482.411365] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [482.411372] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [482.411379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [482.411409] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [482.411684] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [482.413120] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [482.413377] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [482.415616] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [482.416081] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [482.416187] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [482.416520] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [482.416610] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [482.416615] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [482.416705] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [482.417954] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [482.417958] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [482.418047] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [482.443025] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [482.443029] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [482.443031] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [482.443034] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [482.443036] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [482.443038] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [482.443041] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [482.443044] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [482.443047] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [482.443299] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [482.443426] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [482.443767] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [482.443853] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [482.443864] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [482.447977] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [482.522619] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [482.523506] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [482.524182] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [482.524866] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [482.525484] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [482.581289] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:525:DDI TC2/PHY G][CRTC:150:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 min link_bpp 18.0000 max link_bpp 36.0000

<7> [482.581966] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 HDR no link rate required 668250 available 1080000

<7> [482.582584] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [482.583137] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:525:DDI TC2/PHY G] [CRTC:150:pipe A]

<7> [482.583722] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:150:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [482.584260] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:150:pipe A] fastset requirement not met, forcing full modeset

<7> [482.584821] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:150:pipe A] releasing TC PLL 2

<7> [482.585420] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [482.586129] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [482.586614] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [482.587111] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [482.587557] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [482.587984] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [482.588052] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [482.588120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [482.588188] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:34:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [482.588267] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:150:pipe A] data rate 594000 num active planes 1

<7> [482.588369] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [482.588463] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [482.588549] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [482.588646] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [482.588747] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:150:pipe A] allocated TC PLL 2

<7> [482.588836] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:150:pipe A] reserving TC PLL 2

<7> [482.588923] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: yes [modeset]

<7> [482.589014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [482.589104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [482.589194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [482.589279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [482.589372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [482.589457] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [482.589541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [482.589624] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [482.589708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [482.589793] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [482.589876] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [482.589958] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [482.590040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [482.590123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [482.590205] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [482.590286] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [482.590375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [482.590456] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [482.590538] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [482.590620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [482.590701] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [482.590783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [482.590868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [482.590952] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [482.591035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [482.591119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [482.591202] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [482.591284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [482.591384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [482.591475] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [482.591558] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [482.591641] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [482.591723] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [482.591804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [482.591886] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [482.591969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [482.592054] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [482.592137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [482.592220] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [482.592303] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [482.592400] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [482.592485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [482.592568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [482.592654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [482.592741] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [482.592825] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [482.592910] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [482.592993] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x40000000 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [482.593080] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [482.593166] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [482.593251] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0db0 0x0000 0x0000

<7> [482.593343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0db0 0x0000

<7> [482.593427] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0db0

<7> [482.593510] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0100 0x0100 0x0100

<7> [482.593593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [482.593674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.593758] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.593841] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.593922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [482.594008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [482.594091] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:34:plane 1A] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [482.594172] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [482.594260] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [482.594354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:64:plane 2A] fb: [NOFB], visible: no

<7> [482.594439] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:94:plane 3A] fb: [NOFB], visible: no

<7> [482.594523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:124:plane 4A] fb: [NOFB], visible: no

<7> [482.594607] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:134:plane 5A] fb: [NOFB], visible: no

<7> [482.594692] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:144:cursor A] fb: [NOFB], visible: no

<7> [482.595359] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [482.595686] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [482.595805] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [482.596141] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)

<7> [482.596231] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [482.596579] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [482.596662] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [482.596743] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [482.596822] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [482.596900] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [482.596980] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [482.597057] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [482.597132] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [482.597209] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [482.597287] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [482.597372] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [482.597448] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [482.597524] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [482.597599] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [482.597675] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [482.597751] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [482.598038] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [482.598195] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [482.598477] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [482.598579] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:150:pipe A]

<7> [482.598668] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [482.601263] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [482.606189] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.615669] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [482.617276] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.617718] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [482.619227] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [482.619787] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [482.627862] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [482.628101] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [482.636388] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [482.636801] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [482.638224] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [482.656152] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G] Enable audio codec on [CRTC:150:pipe A], 40 bytes ELD

<7> [482.672787] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:526:DP-2]

<7> [482.673692] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]

<7> [482.678296] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]

<7> [482.682977] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]

<7> [482.687375] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]

<7> [482.690439] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.704874] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:526:DP-2][ENCODER:525:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [482.707082] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [482.708997] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [482.714492] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [482.716244] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:525:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [482.725914] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [482.726105] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [482.726294] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [482.733741] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.735695] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.737720] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.738412] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [482.738825] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [482.741707] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.743739] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.745734] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.747752] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.749753] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.753783] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.755636] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.757693] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.759728] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.761744] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.763724] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.765765] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.767780] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [482.769494] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [482.769511] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 30.

<7> [482.769517] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 36.

<7> [482.769523] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does deep color 48.

<7> [482.769529] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [482.769534] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [482.769542] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD monitor DPF90435

<7> [482.769549] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [482.769556] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:526:DP-2] ELD size 40, SAD count 3

<7> [482.769585] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] VRR capable: no

<7> [482.769858] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [482.771574] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [482.771789] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:526:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [482.774654] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]

<7> [482.775208] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [482.775300] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [482.775755] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [482.775848] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [482.775853] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [482.775942] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [482.777291] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [482.777295] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [482.777397] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [482.802897] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 340000 kHz

<7> [482.802901] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 30.

<7> [482.802903] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does deep color 36.

<7> [482.802905] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.

<7> [482.802907] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [482.802909] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no

<7> [482.802912] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD monitor 28E850

<7> [482.802914] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [482.802917] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:538:HDMI-A-3] ELD size 32, SAD count 1

<7> [482.803291] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [482.803385] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [482.803807] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [482.803885] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [482.803895] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]

<7> [482.808000] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]

<7> [482.812455] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [482.812552] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [482.812646] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [482.812740] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [482.812832] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [482.812924] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [482.813070] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [482.813166] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [482.813259] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [482.813359] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [482.813452] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [482.813543] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [482.813677] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [482.813770] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [482.813860] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [482.813949] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [482.814038] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [482.814126] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [482.814233] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [482.814315] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [482.814398] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [482.814539] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [482.814627] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [482.814716] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:537:DDI TC3/PHY H] [CRTC:268:pipe B]

<7> [482.814808] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [482.814899] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset

<7> [482.814987] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing TC PLL 3

<7> [482.815087] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [482.815166] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:150:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [482.815236] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [482.815328] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:34:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [482.815417] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:144:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [482.815491] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [482.815560] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [482.815626] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [482.815693] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [482.815759] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [482.815824] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [482.815900] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 594000 num active planes 1

<7> [482.815990] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [482.816079] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [482.816169] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [482.816268] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [482.816373] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated TC PLL 3

<7> [482.816459] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving TC PLL 3

<7> [482.816542] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]

<7> [482.816633] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [482.816738] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [482.816829] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [482.816917] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [482.817002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [482.817087] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [482.817171] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [482.817254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [482.817343] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [482.817346] xe 0000:03:00.0: scan mode: Underscan

<7> [482.817347] xe 0000:03:00.0: colorimetry: No Data

<7> [482.817348] xe 0000:03:00.0: picture aspect: No Data

<7> [482.817349] xe 0000:03:00.0: active aspect: Same as Picture

<7> [482.817351] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [482.817352] xe 0000:03:00.0: quantization range: Full

<7> [482.817353] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [482.817355] xe 0000:03:00.0: ycc quantization range: Full

<7> [482.817356] xe 0000:03:00.0: hdmi content type: Graphics

<7> [482.817358] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [482.817359] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [482.817362] xe 0000:03:00.0: product: Discrete gfx

<7> [482.817363] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [482.817364] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [482.817366] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 07 00 66 10 00 01 00 00 00 00 00 00 00 00

<7> [482.817452] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 05 e3 cd 0c 32 38 45 38 35 30 09 07 07 00 00 00

<7> [482.817537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [482.817621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [482.817705] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37

<7> [482.817788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [482.817871] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [482.817956] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [482.818042] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9

<7> [482.818125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [482.818209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9

<7> [482.818293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9

<7> [482.818382] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [482.818464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [482.818548] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [482.818630] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [482.818712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [482.818795] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [482.818883] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state:

<7> [482.818967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [482.819050] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [482.819134] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [482.819218] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [482.819301] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [482.819392] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [482.819480] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [482.819562] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [482.819645] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [482.819728] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [482.819811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [482.819896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [482.819979] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [482.820062] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [482.820146] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [482.820230] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [482.820313] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [482.820408] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.820496] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.820578] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.820661] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [482.820745] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [482.820831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.820922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.821013] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [482.821103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [482.821193] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [482.821284] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:554] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [482.821383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [482.821468] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [482.821551] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no

<7> [482.821635] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no

<7> [482.821725] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no

<7> [482.821816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no

<7> [482.821907] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no

<7> [482.822463] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [482.822605] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa0000000)

<7> [482.822911] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:506:DDI TC1/PHY F]

<7> [482.822992] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST A]

<7> [482.823073] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST B]

<7> [482.823151] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST C]

<7> [482.823227] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:511:DP-MST D]

<7> [482.823302] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:525:DDI TC2/PHY G]

<7> [482.823391] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST A]

<7> [482.823476] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST B]

<7> [482.823557] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST C]

<7> [482.823638] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:530:DP-MST D]

<7> [482.823718] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:537:DDI TC3/PHY H]

<7> [482.823799] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:541:DDI TC4/PHY I]

<7> [482.823879] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST A]

<7> [482.823959] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST B]

<7> [482.824039] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST C]

<7> [482.824119] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:546:DP-MST D]

<7> [482.838960] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [482.839241] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [482.855653] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:268:pipe B]

<7> [482.855906] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [482.859010] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [482.877891] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:538:HDMI-A-3][ENCODER:537:DDI TC3/PHY H] Enable audio codec on [CRTC:268:pipe B], 32 bytes ELD

<7> [482.882532] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [482.894781] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [482.895457] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [482.896430] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:538:HDMI-A-3]

<7> [482.897163] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<6> [482.903875] [IGT] xe_pm: finished subtest d3hot-multiple-execs, SUCCESS

<7> [482.923613] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [482.945888] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-multiple-execs