Result:
i915_display_info8 igt_runner8 results8.json results8-xe-load.json guc_logs8.tar i915_display_info_post_exec8 boot8 dmesg8
| Detail | Value |
|---|---|
| Duration | 6.32 seconds |
| Hostname |
shard-lnl-4 |
| Igt-Version |
IGT-Version: 2.3-g0752778f5 (x86_64) (Linux: 6.19.0-rc6-lgci-xe-xe-4442-ab42b1c3fe4ce1ae5+ x86_64) |
| Out |
Using IGT_SRANDOM=1769214417 for randomisation Opened device: /dev/dri/card0 Starting subtest: seamless-rr-switch-virtual Default Mode: 2880x1800: 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa Starting dynamic subtest: pipe-A-eDP-1 Use HIGH_RR Mode as default 2880x1800: 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa Requested rate[0]: 8333333 ns (120.00 Hz), Expected rate between: 8264462 ns (121.00 Hz) to 8403361 ns (119.00 Hz) Completed 528 flips, 0 were in threshold for [(120 Hz) 8333333ns] Stack trace: #0 ../lib/igt_core.c:2075 __igt_fail_assert() #1 ../tests/kms_vrr.c:840 test_seamless_virtual_rr_basic() #2 ../tests/kms_vrr.c:1107 run_vrr_test.constprop.0() #3 ../tests/kms_vrr.c:1209 __igt_unique____real_main1151() #4 ../tests/kms_vrr.c:1151 main() #5 [__libc_init_first+0x8a] #6 [__libc_start_main+0x8b] #7 [_start+0x25] Dynamic subtest pipe-A-eDP-1: FAIL (6.322s) Subtest seamless-rr-switch-virtual: FAIL (6.633s) |
| Err |
Starting subtest: seamless-rr-switch-virtual
Starting dynamic subtest: pipe-A-eDP-1
(kms_vrr:9451) CRITICAL: Test assertion failure function test_seamless_virtual_rr_basic, file ../tests/kms_vrr.c:843:
(kms_vrr:9451) CRITICAL: Failed assertion: result > 75
(kms_vrr:9451) CRITICAL: Refresh rate (120 Hz) 8333333ns: Target threshold not reached, result was 0%
Dynamic subtest pipe-A-eDP-1 failed.
**** DEBUG ****
A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ae/430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8234000 (121.45 Hz)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_fb(431)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 431
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1af/431
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8234000 (121.45 Hz)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_fb(430)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ae/430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8234000 (121.45 Hz)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_fb(431)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 431
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1af/431
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8235000 (121.43 Hz)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_fb(430)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ae/430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8234000 (121.45 Hz)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_fb(431)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 431
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1af/431
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8235000 (121.43 Hz)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_fb(430)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ae/430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8234000 (121.45 Hz)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_fb(431)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 431
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1af/431
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8234000 (121.45 Hz)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_fb(430)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:9451) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:9451) igt_kms-DEBUG: display: commit {
(kms_vrr:9451) igt_kms-DEBUG: display: populating plane data: A.0, fb 430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1ae/430
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x95/149
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:9451) igt_kms-DEBUG: display: }
(kms_vrr:9451) DEBUG: event_ns - last_event_ns: 8235000 (121.43 Hz)
(kms_vrr:9451) INFO: Completed 528 flips, 0 were in threshold for [(120 Hz) 8333333ns]
(kms_vrr:9451) CRITICAL: Test assertion failure function test_seamless_virtual_rr_basic, file ../tests/kms_vrr.c:843:
(kms_vrr:9451) CRITICAL: Failed assertion: result > 75
(kms_vrr:9451) CRITICAL: Refresh rate (120 Hz) 8333333ns: Target threshold not reached, result was 0%
(kms_vrr:9451) igt_core-INFO: Stack trace:
(kms_vrr:9451) igt_core-INFO: #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_vrr:9451) igt_core-INFO: #1 ../tests/kms_vrr.c:840 test_seamless_virtual_rr_basic()
(kms_vrr:9451) igt_core-INFO: #2 ../tests/kms_vrr.c:1107 run_vrr_test.constprop.0()
(kms_vrr:9451) igt_core-INFO: #3 ../tests/kms_vrr.c:1209 __igt_unique____real_main1151()
(kms_vrr:9451) igt_core-INFO: #4 ../tests/kms_vrr.c:1151 main()
(kms_vrr:9451) igt_core-INFO: #5 [__libc_init_first+0x8a]
(kms_vrr:9451) igt_core-INFO: #6 [__libc_start_main+0x8b]
(kms_vrr:9451) igt_core-INFO: #7 [_start+0x25]
**** END ****
Dynamic subtest pipe-A-eDP-1: FAIL (6.322s)
Subtest seamless-rr-switch-virtual: FAIL (6.633s)
|
| Dmesg |
<6> [320.067594] Console: switching to colour dummy device 80x25
<6> [320.067876] [IGT] kms_vrr: executing
<7> [320.073378] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [320.073388] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [320.073530] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [320.073620] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [320.073846] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [320.073849] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [320.073957] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [320.074074] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [320.074349] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [320.074353] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [320.074483] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [320.074569] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<7> [320.074839] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]
<7> [320.074842] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]
<7> [320.075282] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [320.075590] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [320.075694] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [320.075796] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [320.075918] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [320.075922] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [320.075924] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [320.075925] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [320.075928] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [320.075930] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [320.075931] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor
<5> [320.075933] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [320.075935] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0
<5> [320.075937] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [320.075947] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes
<7> [320.076056] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [320.076154] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [320.076681] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [320.076683] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [320.076684] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [320.076738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:
<7> [320.076742] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [320.076746] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [320.076759] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [320.076763] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [320.076906] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [320.076918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [320.076921] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [320.077040] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [320.077048] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [320.077052] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [320.077194] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<6> [320.077462] [IGT] kms_vrr: starting subtest seamless-rr-switch-virtual
<6> [320.078499] [IGT] kms_vrr: starting dynamic subtest pipe-A-eDP-1
<7> [320.078969] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430]
<7> [320.098587] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [320.145088] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [320.145227] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 695310 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [320.145331] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 link rate required 2607413 available 3240000
<7> [320.145427] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [320.145513] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [320.145601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 64, data 6750791/8388608 link 450052/524288)
<7> [320.145688] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state
<7> [320.145773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [320.145911] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [320.146038] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [320.146159] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [320.146256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [320.146340] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [320.146423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [320.146520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [320.146616] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [320.146711] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [320.146791] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [320.146886] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [320.146980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [320.147073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,
<7> [320.147167] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 61440, rem: 0, den: 1,
<7> [320.147256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 210, tx_clk_div: 0.
<7> [320.147334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [320.147412] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [320.147488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [320.147564] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [320.147640] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [320.147715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [320.147790] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [320.147867] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 695309)
<7> [320.147971] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 695309)
<7> [320.148061] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 810000)
<7> [320.148149] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1)
<7> [320.148239] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [320.148327] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0
<7> [320.148454] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 4011), size 4051 -> 4011
<7> [320.148539] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> (4011 - 4096), size 45 -> 85
<7> [320.148605] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [320.148663] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 2, 25, 25, 25, 25, 25, 0, 0, 0, 5, 0
<7> [320.148723] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 49, 601, 601, 601, 601, 601, 0, 0, 63, 121, 135
<7> [320.148786] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 55, 663, 663, 663, 663, 663, 0, 0, 64, 135, 136
<7> [320.148861] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 2781236 num active planes 1
<7> [320.148970] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [320.149070] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [320.149168] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [320.149264] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [320.149353] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [320.149443] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 347655 kHz
<7> [320.149540] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 43457 kHz
<7> [320.149634] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via crawling and squashing
<7> [320.149725] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 360000 kHz, actual 360000 kHz
<7> [320.149816] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 1, actual 1
<7> [320.149921] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0
<7> [320.150040] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0
<7> [320.150140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]
<7> [320.150240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [320.150338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [320.150427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [320.150507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [320.150585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [320.150662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [320.150739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6750791, data_n: 8388608, link_m: 450052, link_n: 524288, tu: 64
<7> [320.150817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [320.150894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [320.150985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [320.151076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [320.151167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [320.151257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [320.151347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [320.151430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [320.151505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [320.151580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [320.151653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [320.151727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [320.151801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [320.151870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [320.151940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [320.152035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [320.152123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [320.152211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [320.152298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [320.152398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [320.152486] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 120 695309 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [320.152573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [320.152657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pipe src: 2880x1800+0+0, pixel rate 695309, min cdclk 347655
<7> [320.152730] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 35, ips linetime: 0
<7> [320.152800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [320.152875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [320.152950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [320.153115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [320.153220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,
<7> [320.153322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,
<7> [320.153411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.
<7> [320.153485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [320.153555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [320.153622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [320.153696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [320.153770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [320.153856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [320.153941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [320.154025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [320.154131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [320.154225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [320.154324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [320.154417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [320.154504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [320.154583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [320.154654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [320.154729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [320.154815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [320.154899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [320.154984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [320.155063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [320.155174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:430] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [320.155261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [320.155346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [320.155432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [320.155510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [320.155577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [320.155649] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [320.155720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [320.158140] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [320.158996] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [320.159294] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [320.160042] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [320.160175] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [320.370954] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [320.371444] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [320.377210] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [320.377647] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [320.377638] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [320.378117] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [320.378141] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [320.429183] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [320.429593] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]
<7> [320.429752] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [320.430270] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [320.430776] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [320.431215] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [320.431339] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [320.431685] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [320.432164] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1801071 0x16832a72)
<7> [320.432650] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 360000 kHz, VCO 960000 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 1
<7> [320.433161] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)
<7> [320.433559] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=900
<7> [320.433933] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [320.434299] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [320.434609] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [320.434910] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [320.435268] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [320.435663] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [320.435958] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [320.436248] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [320.436596] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [320.436921] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [320.437208] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [320.437528] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [320.437814] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [320.438093] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:400:DP-1]
<7> [320.438421] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:412:DP-2]
<7> [320.438764] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:420:DP-3]
<7> [320.439201] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [320.440459] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]
<7> [320.440849] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [320.442963] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [320.443243] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (487 ms remaining)
<7> [320.466608] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [320.466968] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [320.467261] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [320.467581] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [320.944509] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [321.043958] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [321.044335] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [321.044744] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [321.080704] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [321.081324] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [321.081833] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [321.082494] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [321.108044] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [321.108183] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [321.108307] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [321.257173] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [321.257639] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [321.257963] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [321.260143] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [321.261493] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [321.262302] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [321.263457] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [321.264628] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [321.265820] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [321.266301] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [321.267842] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [321.268179] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 810000, lane count = 4
<7> [321.269028] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [321.269614] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [321.270044] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [321.270519] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [321.278109] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [321.279901] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [321.280356] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [321.283903] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [323.848154] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD off
<7> [323.848337] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [326.395840] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [326.396001] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [326.396097] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6> [326.401198] [IGT] kms_vrr: finished subtest pipe-A-eDP-1, FAIL
<7> [326.401522] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [326.401622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [326.401709] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [326.401815] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [326.401928] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6750791/8388608 link 450052/524288, found tu 0, data 0/0 link 0/0)
<7> [326.402037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [326.402132] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [326.402211] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [326.402289] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [326.402366] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [326.402441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [326.402517] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [326.402591] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [326.402665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [326.402739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [326.402829] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [326.402924] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [326.403018] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [326.403105] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [326.403175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [326.403246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [326.403315] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [326.403385] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [326.403454] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [326.403524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [326.403593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [326.403662] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [326.403730] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [326.403803] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [326.403893] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [326.403982] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [326.404070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [326.404145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [326.404213] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [326.404281] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [326.404348] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 695309, found 0)
<7> [326.404416] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 695309, found 0)
<7> [326.404483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 810000, found 0)
<7> [326.404550] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)
<7> [326.404618] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [326.404686] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0
<7> [326.404791] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [326.404878] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [326.404975] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4011) -> ( 0 - 0), size 4011 -> 0
<7> [326.405047] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4011 - 4096) -> ( 0 - 0), size 85 -> 0
<7> [326.405112] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [326.405167] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 25, 25, 25, 25, 25, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [326.405221] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 49, 601, 601, 601, 601, 601, 0, 0, 63, 121, 135 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [326.405275] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 55, 663, 663, 663, 663, 663, 0, 0, 64, 135, 136 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [326.405342] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [326.405430] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [326.405518] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [326.405605] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [326.405683] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [326.405758] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [326.405836] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 347655 kHz -> 0 kHz
<7> [326.405934] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 43457 kHz -> 0 kHz
<7> [326.406023] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via crawling and squashing
<7> [326.406105] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [326.406180] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [326.406268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]
<7> [326.406344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [326.406419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [326.406493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [326.406567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [326.406641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [326.406715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [326.406823] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [326.406970] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [326.407120] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [326.411965] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [326.412107] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [326.412723] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [326.412830] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [326.621630] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [326.622311] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [326.633017] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [326.633456] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [326.633969] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [326.686132] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [326.686696] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [326.692389] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [326.692910] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]
<7> [326.693065] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [326.694425] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [326.694982] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [326.695622] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [326.696078] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [326.696529] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [326.696915] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [326.697372] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [326.697771] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [326.698131] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [326.698541] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [326.698895] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [326.699309] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [326.699651] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [326.699961] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [326.700282] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [326.700644] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [326.701049] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)
<7> [326.701436] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [326.701738] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [326.702256] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [326.702833] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [326.703234] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [326.703785] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [326.705440] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [326.711098] [IGT] kms_vrr: finished subtest seamless-rr-switch-virtual, FAIL
<7> [326.712171] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [326.712485] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [326.712755] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [326.713024] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [326.713293] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [326.713597] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [326.713866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [326.714124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [326.714422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [326.714659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [326.714880] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [326.715098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [326.715341] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [326.715580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [326.715804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [326.716012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [326.716191] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [326.716371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [326.716574] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [326.716766] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [326.716945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [326.717099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [326.717274] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [326.717640] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [326.717780] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [326.717944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [326.718108] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [326.718248] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [326.718382] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [326.718527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [326.718652] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [326.718770] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [326.718902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [326.719033] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [326.719144] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [326.719250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [326.719357] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [326.719468] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [326.719571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [326.719673] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state
<7> [326.719771] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [326.719868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [326.719963] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,
<7> [326.720056] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 61440, rem: 0, den: 1,
<7> [326.720147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 210, tx_clk_div: 0.
<7> [326.720237] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [326.720326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [326.720413] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [326.720511] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [326.720595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [326.720678] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [326.720760] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [326.720839] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [326.720916] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [326.720993] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [326.721071] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [326.721151] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [326.721230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [326.721308] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [326.721388] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [326.721464] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [326.721730] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [326.721820] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [326.721902] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [326.721977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [326.722047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [326.721977] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [326.722116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [326.722186] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [326.722187] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [326.722295] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [326.722313] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [326.722375] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [326.722442] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [326.722417] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [326.722517] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [326.722582] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [326.722638] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [326.722693] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [326.722749] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [326.722821] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [326.722911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [326.722991] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [326.723068] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [326.723144] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [326.723218] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [326.723292] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [326.723386] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz
<7> [326.723468] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [326.723568] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [326.723555] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [326.723651] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [326.723745] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0
<7> [326.723786] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [326.723823] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0
<7> [326.723903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]
<7> [326.723937] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [326.723982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [326.724060] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [326.724091] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [326.724135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [326.724208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [326.724280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [326.724351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [326.724422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [326.724492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [326.724578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [326.724656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [326.724733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [326.724810] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [326.724886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [326.724962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [326.725038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [326.725114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [326.725189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [326.725264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [326.725338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [326.725414] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [326.725489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [326.725585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [326.725674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [326.725762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [326.725850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [326.725923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [326.725991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [326.726058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [326.726131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [326.726204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [326.726277] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [326.726349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [326.726422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [326.726495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [326.726579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [326.726652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [326.726724] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [326.726797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [326.726869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [326.726941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [326.727012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [326.727078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [326.727144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [326.727210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [326.727280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [326.727351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [326.727423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [326.727494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [326.727578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [326.727653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [326.727727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [326.727801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [326.727875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [326.727948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [326.728021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [326.728094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [326.728167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [326.728236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [326.728304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [326.728371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [326.728441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [326.728513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [326.728595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [326.728667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [326.728739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [326.728864] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [326.728959] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [326.729197] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [326.729334] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [326.729474] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7> [326.729569] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [326.729673] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [326.729775] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [326.729875] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [326.729950] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [326.730020] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [326.730089] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [326.730156] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [326.730224] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [326.730291] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [326.730362] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [326.730425] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [326.730485] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [326.730545] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [326.730618] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [326.730680] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [326.730762] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [326.730914] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [326.730975] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [326.731083] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [326.732400] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]
<7> [326.732485] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [326.734162] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [326.734230] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (460 ms remaining)
<7> [327.203798] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [327.232048] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [327.232510] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [327.232976] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [327.268987] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [327.269705] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [327.270300] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [327.271094] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [327.442313] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [327.442739] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [327.443120] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [327.445403] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [327.446763] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [327.447706] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [327.449092] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [327.450398] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [327.451734] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [327.452187] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [327.453728] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [327.454141] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [327.455007] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [327.455591] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [327.455974] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [327.456484] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [327.472499] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [327.474516] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [327.475020] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [327.478587] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [327.479812] [IGT] kms_vrr: exiting, ret=98
<6> [327.490085] Console: switching to colour frame buffer device 180x56
<7> [327.540198] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [327.540734] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [327.541262] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
|