<5>[ 0.000000] Linux version 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Jan 20 00:59:17 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem257: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000369] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000371] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004883] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004891] e820: update [mem 0x68ff8000-0x68ff8fff] usable ==> reserved <6>[ 0.004908] Using GB pages for direct mapping <6>[ 0.005542] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005543] printk: early log buf free: 258784(98%) <6>[ 0.005544] Secure boot disabled <6>[ 0.005545] ACPI: Early table checksum verification disabled <6>[ 0.005548] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005550] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005554] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005557] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005559] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005560] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005562] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005563] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005565] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005566] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005567] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005569] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005570] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005571] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005573] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005574] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005576] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005577] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005578] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005580] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005581] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005582] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005585] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005586] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005587] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005589] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005590] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005591] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005592] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005594] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005595] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005596] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005598] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005599] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005600] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005601] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005603] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005604] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005605] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005607] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005608] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005609] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005611] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005612] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005613] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005614] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005616] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005617] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005618] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005619] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005620] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005621] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005624] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005626] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005627] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005627] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005627] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005629] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005630] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005630] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005630] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005630] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005631] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005631] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005631] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005632] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005632] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005633] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005633] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005633] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005634] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005634] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005706] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005908] No NUMA configuration found <6>[ 0.005909] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005914] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006028] Zone ranges: <6>[ 0.006029] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006030] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006030] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006031] Device empty <6>[ 0.006032] Movable zone start for each node <6>[ 0.006032] Early memory node ranges <6>[ 0.006033] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006033] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006034] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006034] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006036] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006041] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006055] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007637] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035473] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035481] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.035973] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.035980] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036030] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036031] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036033] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036035] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036036] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036047] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036053] TSC deadline timer available <6>[ 0.036055] CPU topo: Max. logical packages: 1 <6>[ 0.036055] CPU topo: Max. logical dies: 1 <6>[ 0.036056] CPU topo: Max. dies per package: 1 <6>[ 0.036057] CPU topo: Max. threads per core: 1 <6>[ 0.036058] CPU topo: Num. cores per package: 8 <6>[ 0.036058] CPU topo: Num. threads per package: 8 <6>[ 0.036058] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036071] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036072] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036073] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.036074] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036075] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036076] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036077] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036078] Booting paravirtualized kernel on bare hardware <6>[ 0.036080] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036089] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036412] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036416] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036418] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036431] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036532] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036549] random: crng init done <6>[ 0.038375] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039278] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039339] software IO TLB: area num 8. <6>[ 0.046688] Fallback order for Node 0: 0 <6>[ 0.046691] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046692] Policy zone: Normal <6>[ 0.046701] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046702] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046705] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047625] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079246] ********************************************************** <4>[ 0.079247] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079248] ** ** <4>[ 0.079248] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079248] ** via the console, logs, and other interfaces. This ** <4>[ 0.079248] ** might reduce the security of your system. ** <4>[ 0.079249] ** ** <4>[ 0.079249] ** If you see this message and you are not debugging ** <4>[ 0.079249] ** the kernel, report this immediately to your system ** <4>[ 0.079249] ** administrator! ** <4>[ 0.079249] ** ** <4>[ 0.079250] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079250] ** ** <4>[ 0.079250] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079250] ********************************************************** <6>[ 0.080375] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.088771] ftrace: allocating 61070 entries in 240 pages <6>[ 0.088772] ftrace: allocated 240 pages with 4 groups <6>[ 0.090199] Dynamic Preempt: voluntary <6>[ 0.090691] Running RCU self tests <6>[ 0.090691] Running RCU synchronous self tests <6>[ 0.090692] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090692] rcu: RCU lockdep checking is enabled. <6>[ 0.090693] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090693] Trampoline variant of Tasks RCU enabled. <6>[ 0.090693] Rude variant of Tasks RCU enabled. <6>[ 0.090694] Tracing variant of Tasks RCU enabled. <6>[ 0.090694] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090694] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090759] Running RCU synchronous self tests <6>[ 0.090762] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090765] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090767] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101356] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.101818] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102233] Console: colour dummy device 80x25 <6>[ 0.102242] printk: legacy console [tty0] enabled <6>[ 0.103378] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103385] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103389] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103393] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103396] ... CLASSHASH_SIZE: 4096 <6>[ 0.103400] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103403] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103407] ... CHAINHASH_SIZE: 262144 <6>[ 0.103410] memory used by lock dependency info: 54145 kB <6>[ 0.103415] memory used for stack traces: 4224 kB <6>[ 0.103419] per task-struct memory footprint: 1920 bytes <6>[ 0.103469] ACPI: Core revision 20250807 <6>[ 0.104349] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104412] APIC: Switch to symmetric I/O mode setup <6>[ 0.104417] DMAR: Host address width 38 <6>[ 0.104421] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104454] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104486] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104504] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104529] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104551] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104585] DMAR: SATC flags: 0x1 <6>[ 0.104593] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104599] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104603] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.106646] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111821] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.111840] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.111917] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.111923] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112102] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112107] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112118] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112130] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112137] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112141] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.112146] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112153] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112169] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112175] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112180] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112184] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112190] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112196] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112203] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112208] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112213] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112218] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112222] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.112834] Freeing SMP alternatives memory: 56K <6>[ 0.112834] pid_max: default: 32768 minimum: 301 <6>[ 0.112834] landlock: Up and running. <6>[ 0.112834] Yama: becoming mindful. <6>[ 0.112834] AppArmor: AppArmor initialized <6>[ 0.112834] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112834] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112834] Running RCU synchronous self tests <6>[ 0.112834] Running RCU synchronous self tests <6>[ 0.112834] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.112834] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.112834] core: cpu_core PMU driver: <6>[ 0.112834] ... version: 6 <6>[ 0.112834] ... bit width: 48 <6>[ 0.112834] ... generic counters: 10 <6>[ 0.112834] ... generic bitmap: 00000000000003ff <6>[ 0.112839] ... fixed-purpose counters: 4 <6>[ 0.112843] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.112847] ... value mask: 0000ffffffffffff <6>[ 0.112851] ... max period: 00007fffffffffff <6>[ 0.112856] ... global_ctrl mask: 0001000f000003ff <6>[ 0.112926] signal: max sigframe size: 3632 <6>[ 0.112951] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113047] rcu: Hierarchical SRCU implementation. <6>[ 0.113051] rcu: Max phase no-delay instances is 400. <6>[ 0.113199] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115027] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115287] smp: Bringing up secondary CPUs ... <6>[ 0.115638] smpboot: x86: Booting SMP configuration: <6>[ 0.115644] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010829] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.010829] core: cpu_atom PMU driver: <6>[ 0.010829] ... version: 6 <6>[ 0.010829] ... bit width: 48 <6>[ 0.010829] ... generic counters: 8 <6>[ 0.010829] ... generic bitmap: 00000000000000ff <6>[ 0.010829] ... fixed-purpose counters: 6 <6>[ 0.010829] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010829] ... value mask: 0000ffffffffffff <6>[ 0.010829] ... max period: 00007fffffffffff <6>[ 0.010829] ... global_ctrl mask: 00000077000000ff <6>[ 0.120964] smp: Brought up 1 node, 8 CPUs <6>[ 0.122131] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.124007] Memory: 32357576K/33158528K available (25570K kernel code, 5608K rwdata, 9672K rodata, 5724K init, 68176K bss, 777224K reserved, 0K cma-reserved) <6>[ 0.124421] devtmpfs: initialized <6>[ 0.125066] x86/mm: Memory block size: 128MB <6>[ 0.146969] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.147458] Running RCU synchronous self tests <6>[ 0.147923] Running RCU synchronous self tests <6>[ 0.148862] Running RCU Tasks wait API self tests <6>[ 0.148947] Running RCU Tasks Rude wait API self tests <6>[ 0.148947] Running RCU Tasks Trace wait API self tests <6>[ 0.161897] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.162139] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.162211] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.163583] PM: RTC time: 06:13:52, date: 2026-01-20 <6>[ 0.164315] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.165317] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.165621] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.165900] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.165953] audit: initializing netlink subsys (disabled) <5>[ 0.166084] audit: type=2000 audit(1768889632.054:1): state=initialized audit_enabled=0 res=1 <6>[ 0.167060] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.167062] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.167068] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.167073] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.167077] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.167115] cpuidle: using governor ladder <6>[ 0.167115] cpuidle: using governor menu <6>[ 0.167115] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.167919] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.167949] PCI: Using configuration type 1 for base access <6>[ 0.168077] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.169880] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.169886] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.169891] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.169897] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.175139] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.175147] raid6: using avx2x2 recovery algorithm <6>[ 0.175657] fbcon: Taking over console <6>[ 0.175781] ACPI: Added _OSI(Module Device) <6>[ 0.175783] ACPI: Added _OSI(Processor Device) <6>[ 0.175783] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.180874] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.782319] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.795850] ACPI: EC: EC started <6>[ 0.795861] ACPI: EC: interrupt blocked <6>[ 0.798289] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.798294] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.900065] Callback from call_rcu_tasks() invoked. <6>[ 1.102617] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.102838] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.146315] ACPI: Interpreter enabled <6>[ 1.146501] ACPI: PM: (supports S0 S4 S5) <6>[ 1.146509] ACPI: Using IOAPIC for interrupt routing <6>[ 1.154278] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.154287] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.173054] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.173105] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.258221] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.258586] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.261578] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.608366] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.621763] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.758648] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.760427] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.768771] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.778069] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.778333] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.778585] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.078811] ACPI: \_TZ_.FN00: New power resource <6>[ 2.079431] ACPI: \_TZ_.FN01: New power resource <6>[ 2.080025] ACPI: \_TZ_.FN02: New power resource <6>[ 2.080559] ACPI: \_TZ_.FN03: New power resource <6>[ 2.081574] ACPI: \_TZ_.FN04: New power resource <6>[ 2.082958] ACPI: \PIN_: New power resource <6>[ 2.086363] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.086378] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.090846] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.120860] PCI host bridge to bus 0000:00 <6>[ 2.120948] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.120971] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.120990] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.121011] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.121032] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.121055] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.129847] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.131174] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.131310] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.131332] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.131354] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.131443] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.135208] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.135244] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.136909] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.136950] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.136961] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.138439] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.138491] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.138507] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.138530] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.138672] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.138775] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.146348] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.146395] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.146409] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.146430] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.146557] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.146631] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.151374] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.151426] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.151438] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.151456] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.151573] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.151638] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.155818] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.155855] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.155870] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.156112] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.156140] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.156148] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.156600] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.156653] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.156725] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.158313] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.158365] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.158373] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.158431] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.158435] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.160022] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.160074] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.160082] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.160141] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.160145] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.161448] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.161506] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.161575] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.164399] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.164492] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.164597] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.165064] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.165117] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.165185] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.167312] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.167376] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.167386] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.167723] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.167833] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.179454] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.179523] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.190679] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.190810] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.204335] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.204553] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.218032] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.218176] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.218339] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.223276] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.223325] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.223337] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.223348] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.223513] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.223602] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.228799] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.228904] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.228936] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.229278] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.229481] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.234321] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.235825] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.235964] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.235980] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.236384] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.236899] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.236969] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.236982] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.238178] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.238362] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.238799] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.238968] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.239139] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.239333] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.239407] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.239417] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.239427] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.239592] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.239596] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.240529] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.241917] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.242348] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.242405] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.243598] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.243665] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.698243] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.698255] Low-power S0 idle used by default for system suspend <6>[ 2.754536] ACPI: EC: interrupt unblocked <6>[ 2.754623] ACPI: EC: event unblocked <6>[ 2.754835] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.754835] ACPI: EC: GPE=0x6e <6>[ 2.754856] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.754956] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.760835] iommu: Default domain type: Translated <6>[ 2.760835] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.768341] SCSI subsystem initialized <7>[ 2.769935] libata version 3.00 loaded. <6>[ 2.770163] ACPI: bus type USB registered <6>[ 2.770293] usbcore: registered new interface driver usbfs <6>[ 2.770345] usbcore: registered new interface driver hub <6>[ 2.770399] usbcore: registered new device driver usb <6>[ 2.770553] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.770558] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.770579] PTP clock support registered <6>[ 2.771936] EDAC MC: Ver: 3.0.0 <6>[ 2.773027] efivars: Registered efivars operations <6>[ 2.776417] NetLabel: Initializing <6>[ 2.776428] NetLabel: domain hash size = 128 <6>[ 2.776438] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.776597] NetLabel: unlabeled traffic allowed by default <6>[ 2.776634] mctp: management component transport protocol core <6>[ 2.776647] NET: Registered PF_MCTP protocol family <6>[ 2.776751] PCI: Using ACPI for IRQ routing <7>[ 2.829583] PCI: pci_cache_line_size set to 64 bytes <6>[ 2.829862] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 2.830007] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 2.830024] e820: reserve RAM buffer [mem 0x68ff8000-0x6bffffff] <7>[ 2.830030] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 2.830036] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 2.830042] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 2.830900] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 2.830926] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 2.830938] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 2.830977] vgaarb: loaded <7>[ 2.834869] Monitor-Mwait will be used to enter C-1 state <7>[ 2.834970] Monitor-Mwait will be used to enter C-2 state <7>[ 2.834999] Monitor-Mwait will be used to enter C-3 state <6>[ 2.845143] clocksource: Switched to clocksource tsc-early <5>[ 2.846274] VFS: Disk quotas dquot_6.6.0 <6>[ 2.846309] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 2.848841] AppArmor: AppArmor Filesystem Enabled <6>[ 2.849182] pnp: PnP ACPI init <6>[ 2.851001] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 2.851024] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 2.854076] system 00:02: [io 0x06a4] has been reserved <6>[ 2.854095] system 00:02: [io 0x06a0] has been reserved <6>[ 2.882551] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 2.882583] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 2.882601] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 2.882615] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 2.882631] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 2.882647] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 2.882661] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 2.882674] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 2.888394] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 2.892140] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 2.892413] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 2.900614] pnp: PnP ACPI: found 8 devices <6>[ 2.916890] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 2.917298] NET: Registered PF_INET protocol family <6>[ 2.917602] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 2.920794] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 2.921112] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 2.921350] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 2.922503] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 2.924579] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 2.925251] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 2.926871] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 2.928545] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 2.928643] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 2.928662] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 2.928677] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 2.928753] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 2.928763] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 2.928772] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 2.928783] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 2.928811] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 2.928842] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 2.928867] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 2.928892] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 2.928936] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.928950] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 2.928962] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.928974] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.928989] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.928999] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 2.929011] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.929022] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.929037] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.929046] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 2.929057] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.929068] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.929084] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.929092] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.929103] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.929117] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.929154] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.929200] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 2.929209] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 2.929217] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 2.929225] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 2.929234] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.929244] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 2.929251] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 2.929259] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.929269] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 2.929276] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 2.929284] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.929294] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 2.929301] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 2.929309] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.929319] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 2.929326] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 2.929334] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 2.930673] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 2.932821] PCI: CLS 0 bytes, default 64 <6>[ 2.932977] DMAR: No RMRR found <6>[ 2.932994] DMAR: No ATSR found <6>[ 2.933000] DMAR: dmar1: Using Queued invalidation <6>[ 2.933010] DMAR: dmar0: Using Queued invalidation <6>[ 2.933018] DMAR: dmar2: Using Queued invalidation <6>[ 2.934228] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 2.934342] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 2.934440] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 2.934527] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 2.939106] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 2.940666] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 2.940767] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 2.940871] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 2.940965] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 2.941080] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 2.941143] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 2.941202] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 2.941298] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 2.941389] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 2.941493] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 2.941555] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 2.941689] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 2.941750] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 2.941820] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 2.941885] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 2.941981] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 2.942067] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 2.942180] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 2.942307] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 2.942369] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 2.942431] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 2.942498] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 2.942589] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 2.942700] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 2.955242] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 2.955262] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 2.955270] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 2.963237] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 2.963588] clocksource: Switched to clocksource tsc <6>[ 2.963966] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 2.970762] Initialise system trusted keyrings <5>[ 2.970866] Key type blacklist registered <6>[ 2.971197] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 2.982303] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 2.982446] ntfs3: Enabled Linux POSIX ACLs support <6>[ 2.982453] ntfs3: Read-only LZX/Xpress compression included <5>[ 2.983060] integrity: Platform Keyring initialized <5>[ 2.983086] integrity: Machine keyring initialized <6>[ 2.989601] xor: automatically using best checksumming function avx <5>[ 2.989614] Key type asymmetric registered <5>[ 2.989629] Asymmetric key parser 'x509' registered <6>[ 2.989769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 2.990158] io scheduler mq-deadline registered <6>[ 2.991452] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 2.993296] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 2.993723] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 2.995014] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 2.995370] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 2.996623] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 2.996990] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 2.998134] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 2.998617] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.000204] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.000609] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.002724] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.002976] ACPI: button: Lid Switch [LID0] <6>[ 3.003275] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.003491] ACPI: button: Sleep Button [SLPB] <6>[ 3.003763] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.004252] ACPI: button: Power Button [PWRB] <6>[ 3.143058] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.143085] ACPI: thermal: Thermal Zone [TZ00] (48 C) <6>[ 3.144795] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.145451] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.146929] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.169067] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.185455] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.188637] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.188815] Linux agpgart interface v0.103 <6>[ 3.189808] ACPI: bus type drm_connector registered <7>[ 3.190819] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.217947] loop: module loaded <6>[ 3.287036] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.392759] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.567092] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.689772] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 3.822913] Key type psk registered <6>[ 3.831494] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 3.832645] tun: Universal TUN/TAP device driver, 1.6 <6>[ 3.833342] nvme nvme0: pci function 0000:80:00.0 <6>[ 3.834076] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 3.834229] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 3.836384] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 3.838824] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 3.838862] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 3.838884] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 3.839825] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 3.839885] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.839903] usb usb1: Product: xHCI Host Controller <6>[ 3.839916] usb usb1: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.839936] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 3.842649] hub 1-0:1.0: USB hub found <6>[ 3.842842] hub 1-0:1.0: 1 port detected <6>[ 3.849407] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 3.849431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.849449] usb usb2: Product: xHCI Host Controller <6>[ 3.849462] usb usb2: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.849481] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 3.851384] hub 2-0:1.0: USB hub found <6>[ 3.851460] hub 2-0:1.0: 3 ports detected <6>[ 3.879030] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 3.892207] nvme0n1: p1 p2 <6>[ 3.896020] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 3.896075] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 3.898369] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 3.901724] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 3.901759] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 3.901789] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 3.902132] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 3.902155] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.902172] usb usb3: Product: xHCI Host Controller <6>[ 3.902184] usb usb3: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.902204] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 3.903953] hub 3-0:1.0: USB hub found <6>[ 3.904028] hub 3-0:1.0: 8 ports detected <6>[ 3.955069] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 3.955092] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.955108] usb usb4: Product: xHCI Host Controller <6>[ 3.955119] usb usb4: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.955137] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 3.956799] hub 4-0:1.0: USB hub found <6>[ 3.956873] hub 4-0:1.0: 2 ports detected <6>[ 3.970822] usbcore: registered new interface driver usb-storage <6>[ 3.971198] usbcore: registered new interface driver usbserial_generic <6>[ 3.971341] usbserial: USB Serial support registered for generic <6>[ 3.971468] usbcore: registered new interface driver ftdi_sio <6>[ 3.971534] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 3.971656] usbcore: registered new interface driver pl2303 <6>[ 3.971722] usbserial: USB Serial support registered for pl2303 <6>[ 3.971956] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 3.971972] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 4.688418] i8042: Can't read CTR while initializing i8042 <3>[ 4.688437] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 4.690250] mousedev: PS/2 mouse device common for all mice <6>[ 4.693403] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 4.697279] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 4.697551] rtc_cmos rtc_cmos: setting system clock to 2026-01-20T06:13:56 UTC (1768889636) <6>[ 4.697931] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 4.698040] i2c_dev: i2c /dev entries driver <6>[ 4.705045] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 4.705069] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 4.705090] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 4.705158] device-mapper: uevent: version 1.0.3 <6>[ 4.706220] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 4.706252] intel_pstate: Intel P-state driver initializing <6>[ 4.710806] Hybrid CPU capacity scaling enabled <6>[ 4.711385] processor cpu0: EM: created perf domain <6>[ 4.711803] processor cpu1: EM: created perf domain <6>[ 4.712188] processor cpu2: EM: created perf domain <6>[ 4.712544] processor cpu3: EM: created perf domain <6>[ 4.712884] processor cpu4: EM: created perf domain <6>[ 4.713209] processor cpu5: EM: created perf domain <6>[ 4.713526] processor cpu6: EM: created perf domain <6>[ 4.713838] processor cpu7: EM: created perf domain <6>[ 4.714973] intel_pstate: HWP enabled <6>[ 4.714980] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.714987] sdhci: Copyright(c) Pierre Ossman <6>[ 4.715155] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.717858] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 4.718688] drop_monitor: Initializing network drop monitor service <6>[ 4.718893] NET: Registered PF_INET6 protocol family <6>[ 4.720084] Segment Routing with IPv6 <6>[ 4.720128] In-situ OAM (IOAM) with IPv6 <6>[ 4.720181] NET: Registered PF_PACKET protocol family <5>[ 4.720354] Key type dns_resolver registered <4>[ 4.724409] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 4.724751] microcode: Current revision: 0x00000124 <6>[ 4.725549] IPI shorthand broadcast: enabled <6>[ 4.746024] sched_clock: Marking stable (4736001177, 9829997)->(4802004107, -56172933) <6>[ 4.746941] registered taskstats version 1 <5>[ 4.748120] Loading compiled-in X.509 certificates <6>[ 4.791968] Demotion targets for Node 0: null <6>[ 4.792213] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 4.792261] kmemleak: Automatic memory scanning thread started <5>[ 4.792544] Key type .fscrypt registered <5>[ 4.792549] Key type fscrypt-provisioning registered <6>[ 4.795829] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 4.798730] Key type encrypted registered <6>[ 4.798741] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 4.798761] ima: No TPM chip found, activating TPM-bypass! <5>[ 4.798780] Loading compiled-in module X.509 certificates <5>[ 4.799436] Loaded X.509 cert 'Build time autogenerated kernel key: a39eba57f2e082a16a6d45bae7767645ea248723' <6>[ 4.799447] ima: Allocated hash algorithm: sha256 <6>[ 4.799493] ima: No architecture policies found <6>[ 4.799601] evm: Initialising EVM extended attributes: <6>[ 4.799605] evm: security.selinux <6>[ 4.799608] evm: security.SMACK64 <6>[ 4.799611] evm: security.SMACK64EXEC <6>[ 4.799614] evm: security.SMACK64TRANSMUTE <6>[ 4.799617] evm: security.SMACK64MMAP <6>[ 4.799620] evm: security.apparmor <6>[ 4.799623] evm: security.ima <6>[ 4.799625] evm: security.capability <6>[ 4.799628] evm: HMAC attrs: 0x1 <6>[ 4.802076] PM: Magic number: 10:274:216 <6>[ 4.802140] acpi device:67: hash matches <6>[ 4.802176] acpi device:3a: hash matches <6>[ 4.802288] netconsole: network logging started <6>[ 4.802860] RAS: Correctable Errors collector initialized. <6>[ 4.803044] clk: Disabling unused clocks <6>[ 4.803057] PM: genpd: Disabling unused power domains <4>[ 4.803607] check access for rdinit=/init failed: -2, ignoring <6>[ 4.803614] md: Waiting for all devices to be available before autodetect <6>[ 4.803619] md: If you don't use raid, use raid=noautodetect <6>[ 4.803624] md: Autodetecting RAID arrays. <6>[ 4.803632] md: autorun ... <6>[ 4.803635] md: ... autorun DONE. <6>[ 4.849948] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none. <6>[ 4.850021] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 4.850499] devtmpfs: mounted <6>[ 4.868617] Freeing unused decrypted memory: 2036K <6>[ 4.869546] Freeing unused kernel image (initmem) memory: 5724K <6>[ 4.869569] Write protecting the kernel read-only data: 36864k <6>[ 4.870195] Freeing unused kernel image (text/rodata gap) memory: 1052K <6>[ 4.870366] Freeing unused kernel image (rodata/data gap) memory: 568K <6>[ 4.875929] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 4.890942] Run /sbin/init as init process <7>[ 4.890950] with arguments: <7>[ 4.890952] /sbin/init <7>[ 4.890953] with environment: <7>[ 4.890953] HOME=/ <7>[ 4.890954] TERM=linux <7>[ 4.934178] systemd[1]: Inserted module 'autofs4' <7>[ 4.955854] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 4.955891] systemd[1]: Detected architecture x86-64. <7>[ 4.957342] systemd[1]: Hostname set to . <7>[ 5.185266] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.211350] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.213110] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.214658] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.214896] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.215521] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.215637] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8... <7>[ 5.215717] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.215798] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.215870] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.215933] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.216000] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.216223] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.216593] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.216899] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.217206] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.217452] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.217650] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.217958] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.218289] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.218561] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.218737] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.219022] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.219276] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.222542] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.225143] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.227772] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.230829] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.237539] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.241206] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.244943] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.248262] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.251665] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.254389] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.257462] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.263283] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.267683] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.268322] systemd-journald[205]: Collecting audit messages is disabled. <7>[ 5.271258] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.275476] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.275874] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 5.281249] pstore: Using crash dump compression: deflate <7>[ 5.282987] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.285619] pstore: Registered efi_pstore as persistent store backend <7>[ 5.289999] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.290145] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.290241] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.294336] fuse: init (API version 7.45) <7>[ 5.294685] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 5.301424] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.433777] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. <6>[ 5.464173] Adding 8388604k swap on /swap.img. Priority:-1 extents:66 across:274595840k SS <7>[ 5.471589] systemd-journald[205]: Received client request to flush runtime journal. <7>[ 5.488493] systemd-journald[205]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.488513] systemd-journald[205]: Rotating system journal. <4>[ 6.169997] nvme nvme0: using unchecked data buffer <6>[ 6.302926] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.320466] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.384632] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 6.397561] intel-hid INTC107B:00: platform supports 5 button array <5>[ 6.420296] audit: type=1400 audit(1768889638.220:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=404 comm="apparmor_parser" <5>[ 6.420492] audit: type=1400 audit(1768889638.221:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=406 comm="apparmor_parser" <5>[ 6.421045] audit: type=1400 audit(1768889638.222:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=405 comm="apparmor_parser" <5>[ 6.421280] audit: type=1400 audit(1768889638.222:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=407 comm="apparmor_parser" <6>[ 6.421303] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <5>[ 6.421989] audit: type=1400 audit(1768889638.223:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=408 comm="apparmor_parser" <5>[ 6.424434] audit: type=1400 audit(1768889638.225:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=409 comm="apparmor_parser" <5>[ 6.426138] audit: type=1400 audit(1768889638.227:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=410 comm="apparmor_parser" <5>[ 6.429265] audit: type=1400 audit(1768889638.230:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=412 comm="apparmor_parser" <5>[ 6.429546] audit: type=1400 audit(1768889638.230:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=411 comm="apparmor_parser" <5>[ 6.433461] audit: type=1400 audit(1768889638.234:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=413 comm="apparmor_parser" <3>[ 6.583294] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 6.583531] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 6.697877] pci 0000:00:05.0: Setting to D3hot <6>[ 6.709912] pci 0000:00:0b.0: Setting to D3hot <6>[ 6.722536] intel_pmc_core INT33A1:00: initialized <6>[ 6.867556] ACPI: bus type thunderbolt registered <6>[ 6.898091] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 6.911611] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 6.911619] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 6.916752] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 6.941189] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 6.978027] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 6.978435] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 6.991851] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 6.998596] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 7.054028] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 7.060146] intel_rapl_common: Found RAPL domain package <6>[ 7.060155] intel_rapl_common: Found RAPL domain dram <6>[ 7.090071] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 175 <6>[ 7.090078] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 7.104757] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 7.104763] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 7.104765] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 7.104766] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 7.104767] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 7.119186] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.120462] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 7.167820] block nvme0n1: No UUID available providing old NGUID <6>[ 7.196389] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.209527] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.344186] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 7.370513] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 7.370522] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 7.370524] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 7.375657] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.611378] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.617936] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.666212] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.792365] intel_rapl_common: Found RAPL domain package <6>[ 7.792372] intel_rapl_common: Found RAPL domain core <6>[ 7.792375] intel_rapl_common: Found RAPL domain dram <6>[ 7.792377] intel_rapl_common: Found RAPL domain psys <6>[ 7.853296] loop0: detected capacity change from 0 to 8 <4>[ 7.873117] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.915204] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 7.922767] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.922790] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.942512] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 7.970267] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.998384] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.071957] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 8.157497] Consider using thermal netlink events interface <6>[ 8.232111] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 8.386375] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.393012] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 8.424673] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.428058] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.429356] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.429616] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.431205] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.431520] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.432060] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.434052] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.434456] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.435203] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.436058] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.438173] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.441743] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.445367] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.446910] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.449363] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.451696] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.454761] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.455771] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.458630] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.459881] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.462309] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.462900] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.465978] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.530337] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.541697] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.549644] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.560019] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.562035] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.565357] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.570189] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.574082] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.578321] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.581388] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.585942] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.590130] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.593744] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.598594] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.603035] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.606593] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.610724] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.615208] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.620162] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.625357] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 10.303542] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 10.303728] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 10.303771] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 11.402243] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 11.402290] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 11.402349] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 13.345088] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 19.026942] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 19.028635] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 21.349008] systemd-journald[205]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 22.035677] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 52.514456] [IGT] xe_module_load: executing <4>[ 52.514507] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.519376] [IGT] xe_module_load: starting subtest load <5>[ 52.793105] Setting dangerous option force_probe - tainting kernel <6>[ 52.796113] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 52.797627] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 52.797636] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 52.797750] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 52.797854] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 52.799740] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 52.799864] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 52.799967] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 52.800080] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 52.800200] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 52.800310] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 52.800425] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 52.800523] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 52.800602] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 52.800697] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 52.800781] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 52.800887] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 52.800991] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 52.801092] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 52.801242] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 52.801401] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 52.801540] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 52.801649] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 52.801750] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 52.801850] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 52.801952] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.802051] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.802158] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 52.802280] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.802405] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.802522] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.802615] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 52.802707] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.802798] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.802887] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.802975] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 52.803063] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.803174] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.803289] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.803400] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 52.803494] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.803580] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.803664] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.803747] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 52.803833] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.803918] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.804003] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.804096] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 52.804463] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 52.804581] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 52.804684] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 52.804781] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 52.804882] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 52.804985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 52.805158] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 52.805290] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 52.805410] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 52.805510] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 52.805607] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 52.805696] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 52.805784] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 52.805873] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 52.805959] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 52.806041] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 52.806157] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 52.806265] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 52.806379] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.806477] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.806568] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.806656] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 52.806747] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 52.806840] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.806933] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.807015] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.807137] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 52.807278] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.807438] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 52.807575] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.807718] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 52.807889] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 52.808022] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 52.808148] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.808274] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.808414] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 52.808515] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 52.808530] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 52.808652] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 52.808759] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 52.808857] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 52.809125] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 52.809527] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 52.810321] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 52.810454] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 52.810549] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 52.810635] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 52.810720] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 52.810808] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 52.810889] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 52.810983] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 52.811071] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 52.811157] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 52.811243] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 52.811323] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 52.811400] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 52.811477] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 52.813244] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 52.813379] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 52.813497] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 52.813611] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 52.813713] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 52.813821] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 52.813963] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 52.814088] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 52.814213] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.814334] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 52.814455] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.814573] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 52.814690] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.814807] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 52.814938] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 52.815053] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 52.815169] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.815284] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 52.815396] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.815509] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 52.815621] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.815730] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 52.815852] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 52.815964] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 52.816075] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.816184] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 52.816257] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 52.816293] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.816401] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 52.816510] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.816620] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 52.821012] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.821175] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 52.821328] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 52.821529] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:387:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 52.821798] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:387:DDI A/PHY A] <7>[ 52.822015] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 52.822159] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 52.822299] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 52.822445] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 52.822600] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 52.822774] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 52.822911] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 52.823046] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 52.823179] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 52.823336] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:387:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 52.823533] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.823664] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.823786] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.823904] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.824010] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.824257] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.824528] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.825657] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.825965] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 52.827466] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <6>[ 52.827869] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 52.828100] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 52.828532] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 52.829104] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 52.829461] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 52.831149] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 52.840894] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 52.840904] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.840906] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.840907] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 52.840909] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 52.840911] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.840913] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 52.840917] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.840919] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 52.840921] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.840979] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.840981] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.840982] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.840997] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.841134] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.841485] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:388:eDP-1] Performing OUI wait (0 ms) <7>[ 52.841837] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:388:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 52.841975] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:388:eDP-1] DRRS type: seamless <7>[ 52.842131] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:388:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 52.842311] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:388:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 52.842501] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.842621] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.842725] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.842821] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.842915] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.843041] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.843264] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:396:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 52.843489] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.843638] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:396:DDI TC1/PHY TC1] <7>[ 52.843999] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:408:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 52.844143] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.844303] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:408:DDI TC2/PHY TC2] <7>[ 52.844592] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:416:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 52.844730] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.844855] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:416:DDI TC3/PHY TC3] <7>[ 52.845347] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] hw state readout: enabled <7>[ 52.845494] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] hw state readout: disabled <7>[ 52.845617] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] hw state readout: disabled <7>[ 52.845713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 52.845808] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 52.845899] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 52.845982] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 52.846069] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 52.846165] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 52.846270] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 52.846372] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 52.846469] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 52.846547] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 52.846630] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 52.846716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 52.846812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 52.846912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 52.847011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 52.847099] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 52.847201] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 52.847300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 52.848101] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 52.848243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:387:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 52.848361] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.848456] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:396:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 52.848538] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:398:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.848616] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.848695] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.848775] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.848853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:408:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 52.848928] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:410:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.849002] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.849093] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.849188] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.849289] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 52.849384] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:418:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.849477] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.849578] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.849703] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:388:eDP-1] hw state readout: enabled <7>[ 52.849790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:397:DP-1] hw state readout: disabled <7>[ 52.849868] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:409:DP-2] hw state readout: disabled <7>[ 52.849948] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:417:DP-3] hw state readout: disabled <7>[ 52.850122] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 52.850218] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 52.850313] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 52.850392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 52.850462] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 52.850536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 52.850620] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] min_cdclk 173855 kHz <7>[ 52.850701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 52.850782] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 52.850861] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 52.850936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 52.851007] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 52.851099] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 52.851190] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] min_cdclk 0 kHz <7>[ 52.851281] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 52.851365] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 52.851439] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 52.851512] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 52.851580] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 52.851647] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 52.851721] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] min_cdclk 0 kHz <7>[ 52.851952] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 52.852065] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:266:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.852167] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:384:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.852266] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 52.852383] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 52.852497] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 52.852639] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 52.852754] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 52.852997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [setup_hw_state] <7>[ 52.853151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 52.853285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 52.853395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 52.853491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 52.853592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 52.853696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 52.853798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 52.853900] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 52.854010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 52.854130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 52.854247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 52.854346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 52.854442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 52.854532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 52.854617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 52.854715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 52.854816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 52.854914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.855037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.855150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.855266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.855365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.855466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 52.855563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 52.855659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 52.855753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 52.855847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 52.855947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x41eb0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 52.856058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 52.856164] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 52.856261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.856350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.856438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.856526] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.856613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.856700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.856787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.856874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.856996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.857109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.857221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 52.857327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [setup_hw_state] <7>[ 52.857438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [setup_hw_state] <7>[ 52.857811] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:148:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 52.857933] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:148:pipe A] <6>[ 52.881958] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 52.885943] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 52.886068] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 52.886168] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 52.886276] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 52.886365] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 52.886448] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 52.886530] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 52.886608] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 52.886683] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 52.886758] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 52.886831] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 52.886904] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 52.886974] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 52.887043] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 52.887112] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 52.887234] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 52.898036] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 52.899376] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 52.899800] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7>[ 52.900006] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7>[ 52.900172] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 52.900325] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 52.900474] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.541266] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.541270] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.541272] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.541410] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.541538] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.541680] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.541805] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.541979] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.542156] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.542304] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.542399] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.542495] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.542594] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.543702] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.543824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.543950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.544046] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.544134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.544224] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.544310] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.544396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.544478] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.544565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.544660] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.544763] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.544868] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.544967] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.545060] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.545152] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.545244] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.545331] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.545416] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.545504] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.545601] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.545696] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.545787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.545875] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.545953] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.546029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.546111] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.546190] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.546271] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.546352] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 53.546431] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 53.546513] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 53.546603] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.546698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.546795] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.546889] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.546975] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.547058] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.547139] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.547221] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.547563] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.547648] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.547724] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.547799] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.548095] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.548176] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.548246] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.548317] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.548609] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.548699] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.548787] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.548870] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.548950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.549028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.549104] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.549569] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.549716] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 53.549810] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.549896] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.549989] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.550077] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 53.550160] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.550245] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.550322] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.550392] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.550472] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.550544] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.550620] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.550700] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.550776] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.550865] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.551050] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.552315] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.554961] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.570878] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 53.581754] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.582103] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.583185] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 53.583338] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 53.583422] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 53.583501] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 53.583581] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 53.583660] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 53.583737] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 53.583825] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 53.583911] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 53.586577] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.586667] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.586755] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.588606] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.588722] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.591914] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 53.595891] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 53.595989] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.596069] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 53.596146] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.596222] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 53.596297] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.596371] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.596443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.596554] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.596648] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.596741] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.596832] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.596906] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.596973] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 53.598142] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.600116] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.601019] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.601114] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.601226] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 53.622192] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.622666] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.622905] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 53.623129] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 53.623319] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 53.623525] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 53.623711] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 53.623884] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 53.623887] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 53.623889] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 53.623891] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 53.623892] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 53.623894] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 53.623896] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 53.623898] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 53.623901] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 53.623903] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 53.623996] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 53.624275] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 53.624550] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 53.626024] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 53.626220] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 53.626410] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 53.626589] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 53.626761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 53.626940] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 53.627099] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 53.627256] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 53.627401] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 53.627562] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 53.627724] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 53.627870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 53.628034] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.628172] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.628306] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.628434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.628564] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.628691] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.628819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.628978] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.629103] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.629221] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.629333] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.629443] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.629548] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.629650] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.629754] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.629858] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.629958] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 53.630069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 53.630180] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 53.630636] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 53.630761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 53.630888] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 53.631293] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 53.631395] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 53.631496] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 53.632055] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 53.632193] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 53.632290] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.632380] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 53.632469] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.632555] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 53.632638] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.632723] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.632815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.632897] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.632974] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.633048] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.633123] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.633195] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.633264] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 53.633352] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 53.633455] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 53.634636] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.651750] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 53.673004] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.673497] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.674936] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 53.675217] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.677897] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 53.678090] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.680673] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 53.680860] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.724152] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 53.725117] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.725446] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.725791] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.726180] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.726952] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 53.727240] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 53.727515] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 53.728992] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 0: start 0x90008 <7>[ 53.729352] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 1: start 0x90108 <7>[ 53.729691] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 2: start 0x90208 <7>[ 53.730050] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 3: start 0x90308 <7>[ 53.730370] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 4: start 0x903c8 <7>[ 53.730681] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 0: start 0x98008 <7>[ 53.730997] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 1: start 0x98108 <7>[ 53.731278] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 2: start 0x98208 <7>[ 53.731551] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 3: start 0x98308 <7>[ 53.731828] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 4: start 0x983c8 <7>[ 53.732129] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 0: start 0x52008 <7>[ 53.732398] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 1: start 0x52108 <7>[ 53.732666] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 2: start 0x52208 <7>[ 53.732983] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 3: start 0x52308 <7>[ 53.733247] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 4: start 0x523c8 <7>[ 53.733952] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 53.734225] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:148:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 53.734513] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 53.734837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [fastset] <7>[ 53.735223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [fastset] <7>[ 53.737060] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 53.737289] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 53.754161] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:266:pipe B] <7>[ 53.754576] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:384:pipe C] <7>[ 53.767103] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:388:eDP-1] adding connector to sysfs <7>[ 53.771942] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:388:eDP-1] backlight device intel_backlight registered <7>[ 53.772376] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 53.772691] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Panel prepare <7>[ 53.773593] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 53.775573] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:388:eDP-1] generating connector hotplug event <7>[ 53.775660] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:397:DP-1] adding connector to sysfs <7>[ 53.776257] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 53.777133] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:397:DP-1] generating connector hotplug event <7>[ 53.777182] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:409:DP-2] adding connector to sysfs <7>[ 53.777709] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 53.778438] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:409:DP-2] generating connector hotplug event <7>[ 53.778491] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:417:DP-3] adding connector to sysfs <7>[ 53.779204] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 53.779863] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:417:DP-3] generating connector hotplug event <6>[ 53.779952] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 53.779985] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 53.789418] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 53.792622] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 53.795434] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <7>[ 53.795339] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <6>[ 53.795444] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 53.795525] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 53.797777] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 53.797994] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.798179] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:397:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.798307] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 53.798347] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 53.798454] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.798497] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:266:pipe B] not active, skipping <7>[ 53.798606] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:384:pipe C] not active, skipping <7>[ 53.798596] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:409:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.798698] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 53.798707] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 53.798848] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.798967] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:417:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.799056] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.799076] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 53.799706] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 53.799731] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 53.801291] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.801678] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.801804] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.801908] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.802278] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.802287] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.802289] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.802291] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.802294] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.802297] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.802299] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 53.802305] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.802307] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 53.802310] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.802346] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 53.802467] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.802572] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.803291] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] status updated from unknown to connected <7>[ 53.803609] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 53.804050] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.804055] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.804057] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.804155] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 53.804166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.804170] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.804175] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 53.804181] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 53.804410] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 53.804417] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 53.804421] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 53.804567] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 53.804571] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 53.804575] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 53.804700] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 53.804704] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 53.804709] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 53.804712] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 53.804714] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 53.804924] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.804954] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 53.804958] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 53.804975] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.805119] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 53.805136] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <6>[ 53.828713] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 53.830676] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 53.830785] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <7>[ 53.831585] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:388:eDP-1] set backlight level = 13892 <7>[ 53.833032] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 53.834043] fbcon: xedrmfb (fb0) is primary device <7>[ 53.835084] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:388:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 53.835243] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:387:DDI A/PHY A][CRTC:148:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 53.835393] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 53.835551] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 53.835691] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:387:DDI A/PHY A] [CRTC:148:pipe A] <7>[ 53.835848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 53.835996] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 53.836143] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 53.836286] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 53.836408] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.836548] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.836688] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 53.836841] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.836988] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.837124] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.837258] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.837389] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.837516] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.837629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 53.837757] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 53.837890] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.838025] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 53.838158] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.838290] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.838420] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.838550] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.838678] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.838839] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.838975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 53.839112] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 53.839247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 53.839380] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] fastset requirement not met, forcing full modeset <7>[ 53.839945] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 53.840060] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 53.840164] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 53.840266] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 53.840382] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 53.840501] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.840599] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.840716] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.840810] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.840901] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.840989] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.841072] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.841150] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.841235] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.841318] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.841401] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.841498] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.841608] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.841741] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.841831] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.841916] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.842010] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.842104] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.842186] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.842269] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.842389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:148:pipe A] data rate 1390840 num active planes 1 <7>[ 53.842515] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 53.842663] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 53.842796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.842925] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.843051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 53.843243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [modeset] <7>[ 53.843381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.843502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 53.843622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.843749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.843875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.843989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.844086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 53.844186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.844288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.844394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.844512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 53.844645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.844765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 53.844887] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 53.845005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 53.845113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 53.845206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 53.845298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 53.845388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 53.845474] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.845593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 53.845713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 53.845837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.845952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.846069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.846186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.846302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.846410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.846494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 53.846623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.846733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.846860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.846948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.847029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 53.847111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 53.847191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.847271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.847350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.847429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.847524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.847622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.847731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.847840] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.847928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.848015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.848102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.848192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.848283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:389] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 53.848373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 53.848455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 53.848575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 53.848679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 53.848781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 53.848879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 53.848962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7>[ 53.853217] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 53.854896] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 53.855074] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 54.055446] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 0 <7>[ 54.056400] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.076370] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.076715] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.076810] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.077094] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.077295] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 54.129347] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.129682] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 54.135970] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.136363] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 54.136322] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.137151] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 54.137145] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.137772] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:387:DDI A/PHY A] <7>[ 54.138141] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:396:DDI TC1/PHY TC1] <7>[ 54.138420] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:398:DP-MST A] <7>[ 54.138693] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DP-MST B] <7>[ 54.138993] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DP-MST C] <7>[ 54.139266] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DDI TC2/PHY TC2] <7>[ 54.139531] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST A] <7>[ 54.139797] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DP-MST B] <7>[ 54.140099] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DP-MST C] <7>[ 54.140368] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DDI TC3/PHY TC3] <7>[ 54.140636] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST A] <7>[ 54.140891] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST B] <7>[ 54.141183] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DP-MST C] <7>[ 54.141460] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.142863] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power on <7>[ 54.143126] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining) <7>[ 54.162249] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.162562] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 54.162840] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 54.163138] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.260328] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 54.629645] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 54.709367] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.709705] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 54.710083] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 54.746600] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.747162] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 54.747581] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 54.748145] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 54.850502] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.850561] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.850685] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.920560] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.922634] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 54.922991] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 54.925134] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.926349] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 54.927152] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 54.928159] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 54.929258] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 54.930219] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 54.930494] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 54.931773] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 54.932074] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 54.932867] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 54.933301] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 54.933610] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 54.933948] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 13892 <7>[ 54.950272] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 54.952310] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:388:eDP-1] <7>[ 54.952749] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe A] <7>[ 54.954163] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 54.955499] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 54.957215] Console: switching to colour frame buffer device 180x56 <6>[ 55.004519] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 55.004589] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 55.005388] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 55.005856] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 55.006245] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 55.006624] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 55.007047] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 55.007442] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 55.007812] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 55.008194] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 55.008538] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 55.008911] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 55.009246] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 55.009579] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 55.009963] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 55.010296] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 55.010617] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 55.010950] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 55.011301] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 55.011581] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 55.011877] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 55.012131] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 55.012385] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 55.013388] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 55.013633] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 55.013953] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 55.014224] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 55.014500] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 55.014757] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 55.014980] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.015195] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.015905] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.016798] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.016866] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.018605] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 55.018677] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.019709] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.020171] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.020492] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.020787] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.021196] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 55.021671] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.021685] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.021690] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.021693] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.021700] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.021706] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.021710] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 55.021729] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.021733] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 55.021739] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.021793] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 55.022015] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.022111] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 55.022774] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 55.022782] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 55.022796] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.022800] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.022801] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.022882] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 55.023422] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.023434] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.023446] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 55.023457] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 55.023947] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.024247] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 55.024257] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 55.024263] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 55.024492] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.024665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 55.024672] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 55.024678] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 55.024888] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.025043] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 55.025047] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 55.025051] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 55.025054] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 55.025056] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 55.025328] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.025360] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 55.025364] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.025494] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <6>[ 55.025521] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 55.026437] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7>[ 55.029307] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 55.031623] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.032083] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.035953] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.035964] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 55.038177] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 55.038197] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 55.066762] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.066779] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.067016] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 55.067028] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 55.068735] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.068970] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.069618] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.069885] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.070248] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.070352] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.070447] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.071030] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.071039] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.071041] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.071042] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.071045] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.071047] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.071049] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 55.071058] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.071059] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 55.071062] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.071088] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 55.071183] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.071273] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.071861] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.071864] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.071865] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.071940] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 55.071951] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.071954] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.071959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 55.071964] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 55.072115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 55.072119] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 55.072122] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 55.072245] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 55.072249] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 55.072252] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 55.072371] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 55.072374] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 55.072379] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 55.072381] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 55.072384] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 55.072489] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.072512] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 55.072515] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.072550] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.073842] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.073993] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.079891] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.080092] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.080208] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.080318] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 55.080424] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.080529] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.080653] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.080765] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 55.080870] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.080978] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.081081] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.081185] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 55.081287] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.081390] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.081492] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.081602] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 55.081707] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.081807] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.081907] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.082007] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 55.082107] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.082206] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.082305] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.082405] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 55.082504] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.082607] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.082710] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.082809] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 55.082910] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.083009] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.083109] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.083208] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 55.083309] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.083410] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.083519] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.083626] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 55.084386] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6>[ 55.088856] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 55.091917] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 55.096528] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 55.102247] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 55.134108] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.134239] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.134425] [IGT] xe_module_load: exiting, ret=0 <7>[ 55.173583] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.173915] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.174140] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.110288] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.110412] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.110530] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.206927] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 57.566869] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD off <7>[ 57.567947] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067