<5>[ 0.000000] Linux version 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Jan 20 00:59:17 UTC 2026 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000382] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000383] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004894] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004903] e820: update [mem 0x68ff8000-0x68ff8fff] usable ==> reserved <6>[ 0.004920] Using GB pages for direct mapping <6>[ 0.005541] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005542] printk: early log buf free: 258784(98%) <6>[ 0.005542] Secure boot disabled <6>[ 0.005544] ACPI: Early table checksum verification disabled <6>[ 0.005547] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005550] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005554] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005557] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005558] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005560] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005561] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005563] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005564] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005565] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005566] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005568] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005569] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005571] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005572] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005573] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005575] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005576] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005577] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005579] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005580] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005581] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005584] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005585] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005587] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005588] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005589] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005590] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005592] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005593] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005594] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005596] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005597] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005598] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005600] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005601] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005602] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005603] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005605] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005606] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005607] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005609] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005610] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005611] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005613] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005614] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005615] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005617] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005618] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005619] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005620] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005620] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005623] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005626] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005626] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005627] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005627] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005628] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005629] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005630] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005630] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005630] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005630] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005631] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005631] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005631] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005633] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005633] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005633] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005634] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005705] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005909] No NUMA configuration found <6>[ 0.005909] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005914] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006028] Zone ranges: <6>[ 0.006028] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006029] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006030] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006031] Device empty <6>[ 0.006031] Movable zone start for each node <6>[ 0.006032] Early memory node ranges <6>[ 0.006032] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006033] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006034] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006034] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006035] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006040] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006055] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007653] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035610] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035619] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036105] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.036112] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036161] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036163] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036164] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036166] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036167] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036179] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036185] TSC deadline timer available <6>[ 0.036187] CPU topo: Max. logical packages: 1 <6>[ 0.036187] CPU topo: Max. logical dies: 1 <6>[ 0.036187] CPU topo: Max. dies per package: 1 <6>[ 0.036189] CPU topo: Max. threads per core: 1 <6>[ 0.036189] CPU topo: Num. cores per package: 8 <6>[ 0.036190] CPU topo: Num. threads per package: 8 <6>[ 0.036190] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036202] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036203] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036204] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.036205] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036206] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036207] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036208] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036209] Booting paravirtualized kernel on bare hardware <6>[ 0.036211] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036220] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036552] percpu: Embedded 87 pages/cpu s233472 r8192 d114688 u524288 <7>[ 0.036556] pcpu-alloc: s233472 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036558] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036571] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036667] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036685] random: crng init done <6>[ 0.038494] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039404] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039463] software IO TLB: area num 8. <6>[ 0.046867] Fallback order for Node 0: 0 <6>[ 0.046870] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046871] Policy zone: Normal <6>[ 0.046880] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046881] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046884] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047804] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079956] ********************************************************** <4>[ 0.079957] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079958] ** ** <4>[ 0.079958] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079958] ** via the console, logs, and other interfaces. This ** <4>[ 0.079958] ** might reduce the security of your system. ** <4>[ 0.079958] ** ** <4>[ 0.079959] ** If you see this message and you are not debugging ** <4>[ 0.079959] ** the kernel, report this immediately to your system ** <4>[ 0.079959] ** administrator! ** <4>[ 0.079959] ** ** <4>[ 0.079959] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079960] ** ** <4>[ 0.079960] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079960] ********************************************************** <6>[ 0.081051] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089396] ftrace: allocating 61070 entries in 240 pages <6>[ 0.089398] ftrace: allocated 240 pages with 4 groups <6>[ 0.090802] Dynamic Preempt: voluntary <6>[ 0.091288] Running RCU self tests <6>[ 0.091288] Running RCU synchronous self tests <6>[ 0.091289] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.091289] rcu: RCU lockdep checking is enabled. <6>[ 0.091289] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.091290] Trampoline variant of Tasks RCU enabled. <6>[ 0.091290] Rude variant of Tasks RCU enabled. <6>[ 0.091291] Tracing variant of Tasks RCU enabled. <6>[ 0.091291] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.091291] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091355] Running RCU synchronous self tests <6>[ 0.091360] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091363] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091366] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101946] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102409] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102825] Console: colour dummy device 80x25 <6>[ 0.102834] printk: legacy console [tty0] enabled <6>[ 0.103977] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103985] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103988] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103992] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103995] ... CLASSHASH_SIZE: 4096 <6>[ 0.103999] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.104003] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.104006] ... CHAINHASH_SIZE: 262144 <6>[ 0.104010] memory used by lock dependency info: 54145 kB <6>[ 0.104014] memory used for stack traces: 4224 kB <6>[ 0.104018] per task-struct memory footprint: 1920 bytes <6>[ 0.104068] ACPI: Core revision 20250807 <6>[ 0.104912] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104975] APIC: Switch to symmetric I/O mode setup <6>[ 0.104980] DMAR: Host address width 38 <6>[ 0.104984] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.105014] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105048] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.105067] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105091] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.105114] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105147] DMAR: SATC flags: 0x1 <6>[ 0.105155] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105161] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105165] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107206] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112325] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112344] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112421] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112427] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112606] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112611] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112620] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112631] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112638] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112644] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.112649] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112657] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112674] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112681] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112687] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112692] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112698] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112705] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112712] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112717] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112723] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112729] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112734] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113338] Freeing SMP alternatives memory: 56K <6>[ 0.113338] pid_max: default: 32768 minimum: 301 <6>[ 0.113338] landlock: Up and running. <6>[ 0.113338] Yama: becoming mindful. <6>[ 0.113338] AppArmor: AppArmor initialized <6>[ 0.113338] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113338] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113338] Running RCU synchronous self tests <6>[ 0.113338] Running RCU synchronous self tests <6>[ 0.113338] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113338] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113338] core: cpu_core PMU driver: <6>[ 0.113338] ... version: 6 <6>[ 0.113338] ... bit width: 48 <6>[ 0.113338] ... generic counters: 10 <6>[ 0.113338] ... generic bitmap: 00000000000003ff <6>[ 0.113343] ... fixed-purpose counters: 4 <6>[ 0.113347] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.113351] ... value mask: 0000ffffffffffff <6>[ 0.113356] ... max period: 00007fffffffffff <6>[ 0.113360] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113436] signal: max sigframe size: 3632 <6>[ 0.113462] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113559] rcu: Hierarchical SRCU implementation. <6>[ 0.113563] rcu: Max phase no-delay instances is 400. <6>[ 0.113709] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115564] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115830] smp: Bringing up secondary CPUs ... <6>[ 0.116172] smpboot: x86: Booting SMP configuration: <6>[ 0.116178] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010746] core: The event 0x5d0 is not supported as an auto-counter reload event. <6>[ 0.010746] core: cpu_atom PMU driver: <6>[ 0.010746] ... version: 6 <6>[ 0.010746] ... bit width: 48 <6>[ 0.010746] ... generic counters: 8 <6>[ 0.010746] ... generic bitmap: 00000000000000ff <6>[ 0.010746] ... fixed-purpose counters: 6 <6>[ 0.010746] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010746] ... value mask: 0000ffffffffffff <6>[ 0.010746] ... max period: 00007fffffffffff <6>[ 0.010746] ... global_ctrl mask: 00000077000000ff <6>[ 0.122370] smp: Brought up 1 node, 8 CPUs <6>[ 0.122619] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.124553] Memory: 32357584K/33158528K available (25570K kernel code, 5608K rwdata, 9672K rodata, 5724K init, 68176K bss, 777220K reserved, 0K cma-reserved) <6>[ 0.125636] devtmpfs: initialized <6>[ 0.125636] x86/mm: Memory block size: 128MB <6>[ 0.146574] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.147445] Running RCU synchronous self tests <6>[ 0.147458] Running RCU synchronous self tests <6>[ 0.148373] Running RCU Tasks wait API self tests <6>[ 0.148542] Running RCU Tasks Rude wait API self tests <6>[ 0.148542] Running RCU Tasks Trace wait API self tests <6>[ 0.162402] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.162681] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.162759] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.164237] PM: RTC time: 06:47:46, date: 2026-01-20 <6>[ 0.164982] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.165997] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.166297] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.166573] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.166628] audit: initializing netlink subsys (disabled) <5>[ 0.166668] audit: type=2000 audit(1768891666.054:1): state=initialized audit_enabled=0 res=1 <6>[ 0.167720] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.167722] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.167728] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.167733] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.167737] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.167772] cpuidle: using governor ladder <6>[ 0.167772] cpuidle: using governor menu <6>[ 0.167772] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.168594] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.168623] PCI: Using configuration type 1 for base access <6>[ 0.168753] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.170387] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.170395] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.170403] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.170409] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.176157] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.176213] raid6: using avx2x2 recovery algorithm <6>[ 0.177839] fbcon: Taking over console <6>[ 0.178035] ACPI: Added _OSI(Module Device) <6>[ 0.178041] ACPI: Added _OSI(Processor Device) <6>[ 0.178045] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.181373] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.669058] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.693743] ACPI: EC: EC started <6>[ 0.693770] ACPI: EC: interrupt blocked <6>[ 0.701678] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.701692] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.789554] Callback from call_rcu_tasks() invoked. <6>[ 1.017128] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.017150] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.052210] ACPI: Interpreter enabled <6>[ 1.052303] ACPI: PM: (supports S0 S4 S5) <6>[ 1.052307] ACPI: Using IOAPIC for interrupt routing <6>[ 1.060000] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.060025] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.090853] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.090924] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.165588] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.166259] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.173817] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.624941] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.638192] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.775669] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.777245] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.785578] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.795030] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.795296] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.795553] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.068640] ACPI: \_TZ_.FN00: New power resource <6>[ 2.069577] ACPI: \_TZ_.FN01: New power resource <6>[ 2.070441] ACPI: \_TZ_.FN02: New power resource <6>[ 2.071290] ACPI: \_TZ_.FN03: New power resource <6>[ 2.072737] ACPI: \_TZ_.FN04: New power resource <6>[ 2.075012] ACPI: \PIN_: New power resource <6>[ 2.080933] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.080963] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.086229] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.100786] PCI host bridge to bus 0000:00 <6>[ 2.100847] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.100861] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.100873] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.100887] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.100905] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.100922] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.106136] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.107172] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.107268] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.107281] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.107295] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.107531] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.108640] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.108673] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.111086] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.111121] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.111132] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.112551] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.112592] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.112607] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.112627] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.112744] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.112846] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.119944] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.119991] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.120006] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.120026] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.120147] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.120235] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.126875] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.126921] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.126936] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.126957] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.127083] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.127170] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.133970] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.134014] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.134031] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.134501] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.134533] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.134545] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.135243] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.135298] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.135377] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.137954] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.138009] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.138021] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.138089] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.138095] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.140509] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.140564] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.140576] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.140642] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.140649] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.143155] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.143217] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.143295] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.147319] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.147415] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.147535] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.148286] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.148344] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.148422] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.151571] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.151640] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.151653] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.152091] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.152199] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.175766] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.175864] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.198029] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.198130] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.211404] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.211500] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.231244] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.231432] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.231588] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.236152] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.236191] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.236202] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.236214] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.236338] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.236338] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.248975] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.249092] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.249134] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.249515] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.249736] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.258323] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.260682] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.260735] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.260749] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.260822] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.261450] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.261529] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.261543] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.262850] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.263034] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.263545] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.263727] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.263893] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.264086] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.264158] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.264168] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.264178] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.264343] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.264347] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.264989] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.266842] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.267926] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.267984] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.269172] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.269239] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.691084] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 2.691102] Low-power S0 idle used by default for system suspend <6>[ 2.791917] ACPI: EC: interrupt unblocked <6>[ 2.791940] ACPI: EC: event unblocked <6>[ 2.792339] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 2.792339] ACPI: EC: GPE=0x6e <6>[ 2.792339] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 2.792339] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 2.794611] iommu: Default domain type: Translated <6>[ 2.794611] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 2.797163] SCSI subsystem initialized <7>[ 2.797399] libata version 3.00 loaded. <6>[ 2.797521] ACPI: bus type USB registered <6>[ 2.797630] usbcore: registered new interface driver usbfs <6>[ 2.797682] usbcore: registered new interface driver hub <6>[ 2.797725] usbcore: registered new device driver usb <6>[ 2.797865] pps_core: LinuxPPS API ver. 1 registered <6>[ 2.797869] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 2.797891] PTP clock support registered <6>[ 2.798615] EDAC MC: Ver: 3.0.0 <6>[ 2.800528] efivars: Registered efivars operations <6>[ 2.803794] NetLabel: Initializing <6>[ 2.803806] NetLabel: domain hash size = 128 <6>[ 2.803817] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 2.803974] NetLabel: unlabeled traffic allowed by default <6>[ 2.804012] mctp: management component transport protocol core <6>[ 2.804024] NET: Registered PF_MCTP protocol family <6>[ 2.804135] PCI: Using ACPI for IRQ routing <7>[ 2.842668] PCI: pci_cache_line_size set to 64 bytes <6>[ 2.842940] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 2.843076] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 2.843100] e820: reserve RAM buffer [mem 0x68ff8000-0x6bffffff] <7>[ 2.843107] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 2.843112] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 2.843117] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 2.843853] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 2.843853] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 2.843853] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 2.843853] vgaarb: loaded <7>[ 2.847456] Monitor-Mwait will be used to enter C-1 state <7>[ 2.847481] Monitor-Mwait will be used to enter C-2 state <7>[ 2.847481] Monitor-Mwait will be used to enter C-3 state <6>[ 2.854774] clocksource: Switched to clocksource tsc-early <5>[ 2.856655] VFS: Disk quotas dquot_6.6.0 <6>[ 2.856715] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 2.858901] AppArmor: AppArmor Filesystem Enabled <6>[ 2.859296] pnp: PnP ACPI init <6>[ 2.860849] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 2.860871] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 2.862980] system 00:02: [io 0x06a4] has been reserved <6>[ 2.863000] system 00:02: [io 0x06a0] has been reserved <6>[ 2.893647] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 2.893673] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 2.893693] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 2.893706] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 2.893722] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 2.893739] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 2.893766] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 2.893780] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 2.899058] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 2.903691] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 2.903986] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 2.910921] pnp: PnP ACPI: found 8 devices <6>[ 2.926710] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 2.927707] NET: Registered PF_INET protocol family <6>[ 2.928008] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 2.931230] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 2.931557] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 2.931844] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 2.933218] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 2.935300] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 2.935968] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 2.937574] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 2.939249] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 2.939353] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 2.939370] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 2.939384] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 2.939454] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 2.939463] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 2.939472] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 2.939483] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 2.939515] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 2.939540] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 2.939563] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 2.939587] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 2.939629] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.939643] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 2.939656] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.939667] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.939682] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.939699] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 2.939710] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.939722] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.939737] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.939745] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 2.939780] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.939791] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.939807] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.939815] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.939825] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.939840] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.939877] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.939924] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 2.939932] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 2.939940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 2.939948] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 2.939957] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.939967] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 2.939974] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 2.939982] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.939992] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 2.940000] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 2.940008] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.940017] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 2.940025] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 2.940033] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.940043] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 2.940050] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 2.940058] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 2.941462] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 2.943489] PCI: CLS 0 bytes, default 64 <6>[ 2.943613] DMAR: No RMRR found <6>[ 2.943626] DMAR: No ATSR found <6>[ 2.943631] DMAR: dmar1: Using Queued invalidation <6>[ 2.943640] DMAR: dmar0: Using Queued invalidation <6>[ 2.943648] DMAR: dmar2: Using Queued invalidation <6>[ 2.944880] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 2.944989] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 2.945090] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 2.945176] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 2.950163] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 2.952190] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 2.952292] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 2.952385] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 2.952478] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 2.952599] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 2.952657] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 2.952714] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 2.952822] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 2.952920] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 2.953021] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 2.953082] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 2.953205] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 2.953266] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 2.953324] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 2.953383] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 2.953480] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 2.953561] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 2.953673] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 2.953798] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 2.953859] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 2.953919] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 2.953982] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 2.954066] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 2.954175] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 2.966688] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 2.966707] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 2.966716] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 2.972270] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 2.972490] clocksource: Switched to clocksource tsc <6>[ 2.972689] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 2.980914] Initialise system trusted keyrings <5>[ 2.981016] Key type blacklist registered <6>[ 2.981477] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 2.993427] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 2.993575] ntfs3: Enabled Linux POSIX ACLs support <6>[ 2.993582] ntfs3: Read-only LZX/Xpress compression included <5>[ 2.994193] integrity: Platform Keyring initialized <5>[ 2.994216] integrity: Machine keyring initialized <6>[ 3.000645] xor: automatically using best checksumming function avx <5>[ 3.000657] Key type asymmetric registered <5>[ 3.000670] Asymmetric key parser 'x509' registered <6>[ 3.000803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 3.001141] io scheduler mq-deadline registered <6>[ 3.002377] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 3.004108] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 3.004738] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 3.006058] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 3.006613] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 3.007891] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 3.008432] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 3.009594] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 3.010138] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 3.011681] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 3.012302] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 3.014333] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 3.014577] ACPI: button: Lid Switch [LID0] <6>[ 3.014886] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 3.015097] ACPI: button: Sleep Button [SLPB] <6>[ 3.015365] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 3.015851] ACPI: button: Power Button [PWRB] <6>[ 3.119811] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 3.119834] ACPI: thermal: Thermal Zone [TZ00] (44 C) <6>[ 3.121622] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 3.121890] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 3.122891] ACPI: battery: Slot [BAT0] (battery present) <6>[ 3.145027] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 3.161966] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 3.165298] hpet_acpi_add: no address or irqs in _CRS <6>[ 3.165474] Linux agpgart interface v0.103 <6>[ 3.166406] ACPI: bus type drm_connector registered <7>[ 3.167377] initcall simpledrm_platform_driver_init blacklisted <6>[ 3.188825] loop: module loaded <6>[ 3.236594] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 3.346017] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 3.442472] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 3.529169] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 3.697215] Key type psk registered <6>[ 3.701455] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 3.702978] nvme nvme0: pci function 0000:80:00.0 <6>[ 3.703666] tun: Universal TUN/TAP device driver, 1.6 <6>[ 3.707039] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 3.707254] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 3.709865] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 3.713352] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 3.713392] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 3.713422] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 3.714993] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 3.715166] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.715242] usb usb1: Product: xHCI Host Controller <6>[ 3.715292] usb usb1: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.715317] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 3.717859] hub 1-0:1.0: USB hub found <6>[ 3.718003] hub 1-0:1.0: 1 port detected <6>[ 3.724719] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 3.724742] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.724770] usb usb2: Product: xHCI Host Controller <6>[ 3.724783] usb usb2: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.724803] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 3.726795] hub 2-0:1.0: USB hub found <6>[ 3.726881] hub 2-0:1.0: 3 ports detected <6>[ 3.736833] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 3.748455] nvme0n1: p1 p2 <6>[ 3.772204] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 3.772255] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 3.774176] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 3.776434] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 3.776464] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 3.776488] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 3.776837] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.19 <6>[ 3.776855] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.776868] usb usb3: Product: xHCI Host Controller <6>[ 3.776877] usb usb3: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.776893] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 3.778691] hub 3-0:1.0: USB hub found <6>[ 3.778776] hub 3-0:1.0: 8 ports detected <6>[ 3.812448] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.19 <6>[ 3.812469] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 3.812480] usb usb4: Product: xHCI Host Controller <6>[ 3.812487] usb usb4: Manufacturer: Linux 6.19.0-rc6-lgci-xe-xe-4410-d5c98420766570dc0+ xhci-hcd <6>[ 3.812499] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 3.813347] hub 4-0:1.0: USB hub found <6>[ 3.813401] hub 4-0:1.0: 2 ports detected <6>[ 3.820616] usbcore: registered new interface driver usb-storage <6>[ 3.820854] usbcore: registered new interface driver usbserial_generic <6>[ 3.821012] usbserial: USB Serial support registered for generic <6>[ 3.821096] usbcore: registered new interface driver ftdi_sio <6>[ 3.821136] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 3.821213] usbcore: registered new interface driver pl2303 <6>[ 3.821255] usbserial: USB Serial support registered for pl2303 <6>[ 3.821413] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 3.821424] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 4.532940] i8042: Can't read CTR while initializing i8042 <3>[ 4.532954] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 4.533586] mousedev: PS/2 mouse device common for all mice <6>[ 4.534741] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 4.537524] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 4.537753] rtc_cmos rtc_cmos: setting system clock to 2026-01-20T06:47:51 UTC (1768891671) <6>[ 4.537955] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 4.538020] i2c_dev: i2c /dev entries driver <6>[ 4.546255] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 4.546292] softdog: soft_reboot_cmd= soft_active_on_boot=0 <6>[ 4.546319] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 4.546387] device-mapper: uevent: version 1.0.3 <6>[ 4.546933] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 4.546961] intel_pstate: Intel P-state driver initializing <6>[ 4.550029] Hybrid CPU capacity scaling enabled <6>[ 4.550337] processor cpu0: EM: created perf domain <6>[ 4.550532] processor cpu1: EM: created perf domain <6>[ 4.550720] processor cpu2: EM: created perf domain <6>[ 4.550915] processor cpu3: EM: created perf domain <6>[ 4.551095] processor cpu4: EM: created perf domain <6>[ 4.551280] processor cpu5: EM: created perf domain <6>[ 4.551459] processor cpu6: EM: created perf domain <6>[ 4.551636] processor cpu7: EM: created perf domain <6>[ 4.552494] intel_pstate: HWP enabled <6>[ 4.552500] sdhci: Secure Digital Host Controller Interface driver <6>[ 4.552506] sdhci: Copyright(c) Pierre Ossman <6>[ 4.552681] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 4.555447] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 4.556483] drop_monitor: Initializing network drop monitor service <6>[ 4.556726] NET: Registered PF_INET6 protocol family <6>[ 4.557920] Segment Routing with IPv6 <6>[ 4.557957] In-situ OAM (IOAM) with IPv6 <6>[ 4.558007] NET: Registered PF_PACKET protocol family <5>[ 4.558151] Key type dns_resolver registered <4>[ 4.561980] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 4.562360] microcode: Current revision: 0x00000124 <6>[ 4.562938] IPI shorthand broadcast: enabled <6>[ 4.577477] sched_clock: Marking stable (4567001907, 9746612)->(4633659781, -56911262) <6>[ 4.578228] registered taskstats version 1 <5>[ 4.579136] Loading compiled-in X.509 certificates <6>[ 4.623347] Demotion targets for Node 0: null <6>[ 4.623618] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 4.623628] kmemleak: Automatic memory scanning thread started <5>[ 4.623883] Key type .fscrypt registered <5>[ 4.623889] Key type fscrypt-provisioning registered <6>[ 4.627050] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 4.629376] Key type encrypted registered <6>[ 4.629385] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 4.629398] ima: No TPM chip found, activating TPM-bypass! <5>[ 4.629413] Loading compiled-in module X.509 certificates <5>[ 4.630010] Loaded X.509 cert 'Build time autogenerated kernel key: a39eba57f2e082a16a6d45bae7767645ea248723' <6>[ 4.630021] ima: Allocated hash algorithm: sha256 <6>[ 4.630063] ima: No architecture policies found <6>[ 4.630158] evm: Initialising EVM extended attributes: <6>[ 4.630162] evm: security.selinux <6>[ 4.630166] evm: security.SMACK64 <6>[ 4.630168] evm: security.SMACK64EXEC <6>[ 4.630171] evm: security.SMACK64TRANSMUTE <6>[ 4.630175] evm: security.SMACK64MMAP <6>[ 4.630178] evm: security.apparmor <6>[ 4.630180] evm: security.ima <6>[ 4.630183] evm: security.capability <6>[ 4.630186] evm: HMAC attrs: 0x1 <6>[ 4.632210] PM: Magic number: 10:342:772 <6>[ 4.632389] netconsole: network logging started <6>[ 4.632934] RAS: Correctable Errors collector initialized. <6>[ 4.633065] clk: Disabling unused clocks <6>[ 4.633074] PM: genpd: Disabling unused power domains <4>[ 4.633878] check access for rdinit=/init failed: -2, ignoring <6>[ 4.633886] md: Waiting for all devices to be available before autodetect <6>[ 4.633892] md: If you don't use raid, use raid=noautodetect <6>[ 4.633898] md: Autodetecting RAID arrays. <6>[ 4.633907] md: autorun ... <6>[ 4.633910] md: ... autorun DONE. <6>[ 4.681122] EXT4-fs (nvme0n1p2): mounted filesystem ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 ro with ordered data mode. Quota mode: none. <6>[ 4.681192] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 4.681735] devtmpfs: mounted <6>[ 4.699447] Freeing unused decrypted memory: 2036K <6>[ 4.700367] Freeing unused kernel image (initmem) memory: 5724K <6>[ 4.700390] Write protecting the kernel read-only data: 36864k <6>[ 4.701005] Freeing unused kernel image (text/rodata gap) memory: 1052K <6>[ 4.701165] Freeing unused kernel image (rodata/data gap) memory: 568K <6>[ 4.705730] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 4.721847] Run /sbin/init as init process <7>[ 4.721859] with arguments: <7>[ 4.721861] /sbin/init <7>[ 4.721863] with environment: <7>[ 4.721864] HOME=/ <7>[ 4.721865] TERM=linux <7>[ 4.768118] systemd[1]: Inserted module 'autofs4' <7>[ 4.794147] systemd[1]: systemd 255.4-1ubuntu8.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 4.794188] systemd[1]: Detected architecture x86-64. <7>[ 4.795399] systemd[1]: Hostname set to . <7>[ 5.018103] systemd[1]: Queued start job for default target graphical.target. <7>[ 5.042997] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 5.045213] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 5.046814] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 5.047067] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 5.047701] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 5.047818] systemd[1]: Expecting device dev-disk-by\x2duuid-47B0\x2dB6FF.device - /dev/disk/by-uuid/47B0-B6FF... <7>[ 5.047906] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 5.047993] systemd[1]: Reached target slices.target - Slice Units. <7>[ 5.048061] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 5.048123] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 5.048191] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 5.048415] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 5.048997] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 5.049284] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 5.049588] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 5.049853] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 5.050070] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 5.050433] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 5.050746] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 5.051337] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 5.051522] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.051827] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 5.052133] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 5.055391] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 5.058212] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 5.061157] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 5.063953] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 5.071137] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 5.074350] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 5.078137] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 5.081864] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 5.085415] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 5.089728] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 5.095440] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 5.100240] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 5.106924] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 5.109993] systemd-journald[209]: Collecting audit messages is disabled. <7>[ 5.112250] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 5.118158] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 5.118389] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 5.122098] pstore: Using crash dump compression: deflate <7>[ 5.123174] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 5.127052] pstore: Registered efi_pstore as persistent store backend <7>[ 5.129740] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 5.129855] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 5.129928] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 5.130800] fuse: init (API version 7.45) <7>[ 5.134029] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 5.140635] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 5.272247] EXT4-fs (nvme0n1p2): re-mounted ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 r/w. <6>[ 5.300943] Adding 8388604k swap on /swap.img. Priority:-1 extents:52 across:429129728k SS <7>[ 5.315500] systemd-journald[209]: Received client request to flush runtime journal. <7>[ 5.331723] systemd-journald[209]: /var/log/journal/834d840f209d4e2294628ae19454e8da/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 5.331742] systemd-journald[209]: Rotating system journal. <4>[ 6.025330] nvme nvme0: using unchecked data buffer <6>[ 6.174849] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 6.198134] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 6.236656] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 6.248936] intel-hid INTC107B:00: platform supports 5 button array <6>[ 6.264786] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <5>[ 6.313360] audit: type=1400 audit(1768891673.274:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=404 comm="apparmor_parser" <5>[ 6.313678] audit: type=1400 audit(1768891673.274:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=405 comm="apparmor_parser" <5>[ 6.314229] audit: type=1400 audit(1768891673.275:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=406 comm="apparmor_parser" <5>[ 6.314538] audit: type=1400 audit(1768891673.275:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=407 comm="apparmor_parser" <5>[ 6.319661] audit: type=1400 audit(1768891673.280:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=409 comm="apparmor_parser" <5>[ 6.321134] audit: type=1400 audit(1768891673.282:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=410 comm="apparmor_parser" <5>[ 6.322122] audit: type=1400 audit(1768891673.283:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=411 comm="apparmor_parser" <5>[ 6.323649] audit: type=1400 audit(1768891673.284:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=412 comm="apparmor_parser" <5>[ 6.325059] audit: type=1400 audit(1768891673.286:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=413 comm="apparmor_parser" <5>[ 6.326920] audit: type=1400 audit(1768891673.288:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=414 comm="apparmor_parser" <3>[ 6.372097] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 6.372383] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 6.581998] pci 0000:00:05.0: Setting to D3hot <6>[ 6.594005] pci 0000:00:0b.0: Setting to D3hot <6>[ 6.607618] intel_pmc_core INT33A1:00: initialized <6>[ 6.754647] ACPI: bus type thunderbolt registered <6>[ 6.758588] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 6.769188] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 6.769197] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 6.797302] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 6.812859] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 6.837078] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 6.871484] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 6.891181] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 6.905429] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer <6>[ 6.905436] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 6.905438] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 6.905439] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 6.905440] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 6.905441] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 6.908923] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 7.024602] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 9c:a2:f4:61:fe:e9, XID 541, IRQ 175 <6>[ 7.024608] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 7.048896] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 7.050704] intel_rapl_common: Found RAPL domain package <6>[ 7.050710] intel_rapl_common: Found RAPL domain dram <4>[ 7.071997] block nvme0n1: No UUID available providing old NGUID <6>[ 7.150078] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 7.151040] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.216560] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 7.217282] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.218510] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 7.221422] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.242694] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 7.242703] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 7.242705] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 7.385167] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.491584] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.496998] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.694690] intel_rapl_common: Found RAPL domain package <6>[ 7.694695] intel_rapl_common: Found RAPL domain core <6>[ 7.694697] intel_rapl_common: Found RAPL domain uncore <6>[ 7.694699] intel_rapl_common: Found RAPL domain dram <6>[ 7.694701] intel_rapl_common: Found RAPL domain psys <6>[ 7.747647] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.769009] loop0: detected capacity change from 0 to 8 <4>[ 7.796956] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 7.816518] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 7.827668] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 7.847981] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 7.848007] 0x000000000000-0x000002000000 : "BIOS" <6>[ 7.873195] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 7.944846] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 8.027639] Consider using thermal netlink events interface <6>[ 8.103132] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 8.235932] hid: raw HID events driver (C) Jiri Kosina <6>[ 8.242387] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 8.272972] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.279438] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.280841] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.280887] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.282552] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.282722] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.283970] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.285235] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.285352] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.286054] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.288295] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.292887] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.296117] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.297429] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.300084] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.302272] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.305611] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.305948] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 8.308424] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.309543] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.312603] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.312682] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 8.317331] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.386150] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.393057] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.396527] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.399902] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.404680] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.408911] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.413349] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.418070] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.422312] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.425072] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.428594] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.432977] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.437383] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.441715] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.446190] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.449619] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.454419] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.458088] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.463797] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.468133] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 8.497513] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 10.218774] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 10.218832] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 10.218869] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 11.257348] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 11.257388] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 11.257429] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 12.695147] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 18.514747] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.516683] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 37.592052] systemd-journald[209]: /var/log/journal/834d840f209d4e2294628ae19454e8da/user-1000.journal: Journal file uses a different sequence number ID, rotating. <4>[ 42.372816] hrtimer: interrupt took 29560 ns <6>[ 91.688409] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <7>[ 100.554900] [IGT] xe_module_load: executing <4>[ 100.554956] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 100.561191] [IGT] xe_module_load: starting subtest load <5>[ 100.837768] Setting dangerous option force_probe - tainting kernel <6>[ 100.841033] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 100.842704] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 100.842714] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 100.842852] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 100.842981] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 100.844851] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 100.845000] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 100.845111] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 100.845245] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 100.845391] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 100.845506] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 100.845597] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 100.845683] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 100.845769] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 100.845870] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 100.845971] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 100.846111] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 100.846246] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 100.846353] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 100.846460] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 100.846569] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 100.846675] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 100.846781] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 100.846881] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 100.847019] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 100.847164] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 100.847297] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 100.847398] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 100.847494] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 100.847590] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 100.847684] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 100.847779] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 100.847873] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 100.847976] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 100.848097] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 100.848218] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 100.848324] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 100.848413] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 100.848501] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 100.848587] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 100.848674] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 100.848761] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 100.848844] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 100.848929] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 100.849038] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 100.849145] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 100.849254] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 100.849347] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 100.849733] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 100.849850] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 100.849963] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 100.850090] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 100.850212] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 100.850311] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 100.850401] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 100.850496] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 100.850591] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 100.850694] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 100.850782] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 100.850865] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 100.850958] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 100.851075] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 100.851183] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 100.851285] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 100.851363] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 100.851442] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 100.851525] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 100.851613] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 100.851709] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 100.851809] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 100.851904] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 100.852032] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 100.852152] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 100.852270] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 100.852357] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 100.852469] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 100.852608] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 100.852735] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 100.852872] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 100.853050] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 100.853186] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 100.853304] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 100.853404] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 100.853536] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 100.853639] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 100.853653] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 100.853767] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 100.853866] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 100.853969] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 100.854226] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 100.854618] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 100.855609] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 100.855746] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 100.855850] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 100.855946] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 100.856070] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 100.856160] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 100.856249] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 100.856330] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 100.856410] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 100.856491] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 100.856569] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 100.856649] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 100.856729] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 100.856807] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 100.858350] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 100.858473] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 100.858589] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 100.858692] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 100.858793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 100.858894] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 100.859013] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 100.859135] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 100.859258] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 100.859383] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 100.859490] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 100.859601] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 100.859725] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 100.859847] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 100.859975] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 100.860102] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 100.860227] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 100.860350] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 100.860463] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 100.860582] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 100.860697] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 100.860810] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 100.860928] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 100.861065] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 100.861177] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 100.861287] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 100.861396] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 100.861511] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 100.861621] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 100.861728] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 100.863460] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 100.869648] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 100.869829] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 100.869994] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 100.870190] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:387:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 100.870394] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:387:DDI A/PHY A] <7>[ 100.870605] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 100.870747] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 100.870881] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 100.871017] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 100.871155] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 100.871287] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 100.871417] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 100.871545] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 100.871673] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 100.871808] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:387:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 100.872029] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 100.872162] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 100.872283] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 100.872401] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 100.872501] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <6>[ 100.872753] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 100.872713] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 100.872890] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 100.874112] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 100.874359] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 100.875517] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 100.875918] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 100.876347] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 100.876894] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 100.877496] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 100.879155] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 100.888336] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 100.888347] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 100.888349] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 100.888350] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 100.888353] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 100.888355] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 100.888356] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 100.888361] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 100.888362] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 100.888364] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 100.888403] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 100.888404] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 100.888405] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 100.888420] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 100.888562] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:388:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 100.888875] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:388:eDP-1] Performing OUI wait (0 ms) <7>[ 100.889262] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:388:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 100.889400] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:388:eDP-1] DRRS type: seamless <7>[ 100.889561] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:388:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 100.889729] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:388:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 100.889936] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 100.890074] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 100.890192] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 100.890307] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 100.890421] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 100.890551] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 100.890792] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:396:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 100.891000] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 100.891158] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:396:DDI TC1/PHY TC1] <7>[ 100.891563] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:408:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 100.891697] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 100.891827] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:408:DDI TC2/PHY TC2] <7>[ 100.892119] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:416:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 100.892279] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 100.892408] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:416:DDI TC3/PHY TC3] <7>[ 100.892902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] hw state readout: enabled <7>[ 100.893058] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] hw state readout: disabled <7>[ 100.893198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] hw state readout: disabled <7>[ 100.893296] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 100.893393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7>[ 100.893489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7>[ 100.893584] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7>[ 100.893677] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7>[ 100.893762] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7>[ 100.893851] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B <7>[ 100.893945] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B <7>[ 100.894067] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B <7>[ 100.894181] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B <7>[ 100.894291] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B <7>[ 100.894390] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B <7>[ 100.894478] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C <7>[ 100.894562] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C <7>[ 100.894648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C <7>[ 100.894732] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C <7>[ 100.894816] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C <7>[ 100.894899] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C <7>[ 100.895695] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 100.895818] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:387:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 100.895921] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 100.896036] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:396:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 100.896141] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:398:DP-MST A] hw state readout: disabled, pipe A <7>[ 100.896244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DP-MST B] hw state readout: disabled, pipe B <7>[ 100.896331] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:400:DP-MST C] hw state readout: disabled, pipe C <7>[ 100.896417] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 100.896504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:408:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 100.896587] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:410:DP-MST A] hw state readout: disabled, pipe A <7>[ 100.896668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DP-MST B] hw state readout: disabled, pipe B <7>[ 100.896749] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:412:DP-MST C] hw state readout: disabled, pipe C <7>[ 100.896832] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 100.896916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:416:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 100.897009] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:418:DP-MST A] hw state readout: disabled, pipe A <7>[ 100.897092] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DP-MST B] hw state readout: disabled, pipe B <7>[ 100.897175] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:420:DP-MST C] hw state readout: disabled, pipe C <7>[ 100.897295] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:388:eDP-1] hw state readout: enabled <7>[ 100.897394] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:397:DP-1] hw state readout: disabled <7>[ 100.897497] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:409:DP-2] hw state readout: disabled <7>[ 100.897598] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:417:DP-3] hw state readout: disabled <7>[ 100.897847] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 100.897926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7>[ 100.898030] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7>[ 100.898123] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7>[ 100.898214] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7>[ 100.898305] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7>[ 100.898400] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe A] min_cdclk 173855 kHz <7>[ 100.898474] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz <7>[ 100.898544] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz <7>[ 100.898621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz <7>[ 100.898701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz <7>[ 100.898780] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz <7>[ 100.898859] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz <7>[ 100.898936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:266:pipe B] min_cdclk 0 kHz <7>[ 100.899034] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz <7>[ 100.899126] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz <7>[ 100.899217] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz <7>[ 100.899307] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz <7>[ 100.899396] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz <7>[ 100.899484] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz <7>[ 100.899574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:384:pipe C] min_cdclk 0 kHz <7>[ 100.899801] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 100.899885] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:266:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 100.899977] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:384:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 100.900075] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 100.900213] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 100.900334] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 100.900470] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 100.900583] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 100.900829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [setup_hw_state] <7>[ 100.900947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 100.901100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 100.901236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 100.901346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 100.901450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 100.901546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 100.901652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 100.901760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 100.901868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 100.901976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 100.902094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 100.902214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 100.902322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 100.902436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 100.902550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 100.902665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 100.902763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 100.902854] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 100.902944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 100.903065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 100.903174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 100.903278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 100.903370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 100.903462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 100.903553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 100.903644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 100.903738] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 100.903836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x41eb0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 100.903925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 100.904041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 100.904155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 100.904266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 100.904375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 100.904463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 100.904550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 100.904639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 100.904728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 100.904814] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 100.904902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 100.905005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 100.905106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 100.905210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [setup_hw_state] <7>[ 100.905312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [setup_hw_state] <7>[ 100.905588] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:148:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 100.905691] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:148:pipe A] <6>[ 100.918189] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 100.921784] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 100.921904] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 100.922033] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 100.922148] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 100.922250] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 100.922349] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 100.922431] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 100.922503] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 100.922574] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 100.922648] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 100.922722] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 100.922796] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 100.922869] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 100.922940] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 100.923031] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 100.923152] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 100.934033] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 100.934849] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 100.935102] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000000ef <7>[ 100.935204] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000000ef <7>[ 100.935301] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 100.935388] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 100.935468] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 101.575922] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 101.575925] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 101.575926] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 101.576083] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 101.576212] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 101.576341] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 101.576455] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 101.576588] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 101.576713] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 101.576847] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 101.576935] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 101.577029] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 101.577119] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 101.578130] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 101.578238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 101.578353] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 101.578447] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 101.578537] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 101.578627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 101.578714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 101.578800] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 101.578886] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 101.578969] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 101.579063] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 101.579155] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 101.579250] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 101.579343] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 101.579423] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 101.579505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 101.579587] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 101.579670] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 101.579751] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 101.579832] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 101.579910] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 101.579986] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 101.580072] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 101.580154] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 101.580241] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 101.580328] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 101.580421] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 101.580507] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 101.580590] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 101.580672] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 101.580759] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 101.580837] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 101.580918] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 101.581000] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 101.581105] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 101.581189] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 101.581272] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 101.581359] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 101.581442] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 101.581524] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 101.581896] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 101.581970] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 101.582055] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 101.582129] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 101.582433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 101.582505] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 101.582579] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 101.582651] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 101.582945] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 101.583027] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 101.583109] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 101.583185] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 101.583262] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 101.583337] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 101.583412] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 101.583882] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 101.584034] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 101.584126] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 101.584216] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 101.584304] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 101.584389] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 101.584466] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 101.584542] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 101.584620] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 101.584710] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 101.584799] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 101.584885] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 101.584952] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 101.585024] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 101.585109] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 101.585216] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 101.585397] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 101.586471] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 101.589129] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 101.605048] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 101.616198] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 101.616543] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 101.617545] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 101.617688] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 101.617777] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 101.617867] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 101.617948] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 101.618035] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 101.618116] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 101.618202] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 101.618290] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 101.620316] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 101.620429] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 101.620519] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 101.622414] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 101.622514] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 101.625894] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 101.630140] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 101.630263] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 101.630361] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 101.630439] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 101.630516] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 101.630591] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 101.630665] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 101.630738] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 101.630811] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 101.630883] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 101.630956] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 101.631043] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 101.631138] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 101.631231] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 101.632378] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 101.634561] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 101.635548] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 101.635647] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 101.635770] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 101.657054] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 101.657510] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 101.657716] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 101.657897] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 101.658086] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 101.658253] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 101.658417] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 101.658582] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 101.658584] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 101.658586] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 101.658587] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 101.658589] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 101.658590] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 101.658592] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 101.658594] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 101.658595] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 101.658597] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 101.658684] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 101.658981] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 101.659274] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 101.660624] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 101.660806] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 101.660980] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 101.661166] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 101.661321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 101.661472] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 101.661617] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 101.661761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 101.661897] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 101.662029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 101.662160] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 101.662292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 101.662419] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 101.662544] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 101.662668] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 101.662787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 101.662904] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 101.663022] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 101.663139] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 101.663249] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 101.663357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 101.663463] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 101.663569] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 101.663667] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 101.663764] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 101.663856] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 101.663948] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 101.664045] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 101.664134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 101.664237] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 101.664343] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 101.665094] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 101.665216] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 101.665328] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 101.665812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 101.665912] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 101.666009] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 101.666623] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 101.666758] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 101.666850] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 101.666938] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 101.667031] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 101.667126] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 101.667221] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 101.667316] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 101.667397] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 101.667476] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 101.667555] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 101.667628] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 101.667701] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 101.667780] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 101.667864] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 101.667978] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 101.668119] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 101.669915] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 101.687799] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 101.708972] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 101.709496] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 101.710898] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 101.711171] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 101.713791] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 101.714045] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 101.717325] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 101.717631] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 101.760675] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 101.761649] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 101.762046] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 101.762406] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 101.762838] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 101.763766] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 101.764090] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 101.764376] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 101.765879] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 0: start 0x90008 <7>[ 101.766294] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 1: start 0x90108 <7>[ 101.766661] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 2: start 0x90208 <7>[ 101.767074] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 3: start 0x90308 <7>[ 101.767407] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe A] FQ 4: start 0x903c8 <7>[ 101.767738] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 0: start 0x98008 <7>[ 101.768049] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 1: start 0x98108 <7>[ 101.768367] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 2: start 0x98208 <7>[ 101.768642] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 3: start 0x98308 <7>[ 101.768912] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:266:pipe B] FQ 4: start 0x983c8 <7>[ 101.769198] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 0: start 0x52008 <7>[ 101.769481] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 1: start 0x52108 <7>[ 101.769743] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 2: start 0x52208 <7>[ 101.770051] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 3: start 0x52308 <7>[ 101.770310] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:384:pipe C] FQ 4: start 0x523c8 <7>[ 101.770971] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 101.771291] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:148:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 101.771582] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 101.771943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:266:pipe B] enable: no [fastset] <7>[ 101.772306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:384:pipe C] enable: no [fastset] <7>[ 101.773905] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 101.774182] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 101.781069] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:266:pipe B] <7>[ 101.781479] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:384:pipe C] <7>[ 101.791363] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:388:eDP-1] adding connector to sysfs <7>[ 101.796214] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:388:eDP-1] backlight device intel_backlight registered <7>[ 101.796639] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 101.797058] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:388:eDP-1] Panel prepare <7>[ 101.798125] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 101.801223] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:388:eDP-1] generating connector hotplug event <7>[ 101.801345] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:397:DP-1] adding connector to sysfs <7>[ 101.802381] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 101.803698] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:397:DP-1] generating connector hotplug event <7>[ 101.803762] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:409:DP-2] adding connector to sysfs <7>[ 101.804423] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 101.806634] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:409:DP-2] generating connector hotplug event <7>[ 101.806765] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:417:DP-3] adding connector to sysfs <7>[ 101.807899] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 101.809067] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:417:DP-3] generating connector hotplug event <6>[ 101.809129] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 101.809213] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 101.827260] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 101.832405] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 101.833693] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 101.833869] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 101.834298] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 101.834304] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 101.836341] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 101.836500] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 101.836540] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:266:pipe B] not active, skipping <7>[ 101.836712] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:384:pipe C] not active, skipping <7>[ 101.836778] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 101.836876] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 101.837533] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 101.837774] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:397:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 101.837976] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 101.838206] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 101.838401] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:409:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 101.838592] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 101.838819] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 101.839014] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:417:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 101.839497] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 101.839542] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 101.839773] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 101.840927] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 101.841377] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 101.841606] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 101.841791] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 101.842110] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 101.842118] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 101.842121] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 101.842123] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 101.842128] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 101.842132] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 101.842135] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 101.842141] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 101.842144] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 101.842148] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 101.842187] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 101.842396] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 101.842570] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 101.843261] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] status updated from unknown to connected <7>[ 101.843533] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 101.844292] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 101.844295] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 101.844298] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 101.844377] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 101.844386] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 101.844391] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 101.844396] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 101.844402] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 101.844646] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 101.844652] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 101.844657] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 101.844878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 101.844882] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 101.844886] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 101.845113] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 101.845117] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 101.845122] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 101.845125] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 101.845128] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 101.845245] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 101.845270] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 101.845275] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 101.845560] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 101.845846] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <6>[ 101.845773] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 101.845865] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 101.846654] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 101.851279] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 101.851941] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 101.851949] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 101.854691] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 101.855826] fbcon: xedrmfb (fb0) is primary device <7>[ 101.856920] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:388:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 101.857121] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:387:DDI A/PHY A][CRTC:148:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 101.857289] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 101.857433] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 101.857560] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:387:DDI A/PHY A] [CRTC:148:pipe A] <7>[ 101.857694] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 101.857827] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 101.857956] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 101.858102] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 101.858239] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 101.858373] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 101.858509] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 101.858631] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 101.858749] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 101.858873] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 101.859000] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 101.859144] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 101.859271] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 101.859393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 101.859519] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 101.859635] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 101.859751] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 101.859871] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 101.859992] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 101.860127] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 101.860249] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 101.860368] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 101.860486] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 101.860603] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 101.860728] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 101.860853] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:148:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 101.860976] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:148:pipe A] fastset requirement not met, forcing full modeset <7>[ 101.861144] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 101.861272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 101.861400] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 101.861516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 101.861621] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 101.861723] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 101.861816] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.861908] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.862015] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.862173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 101.862270] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.862363] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.862456] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.862556] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 101.862658] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.862749] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.862837] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.862926] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 101.863014] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.863123] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.863218] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.863312] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 101.863403] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.863493] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.863580] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:143:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 101.863689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:148:pipe A] data rate 1390840 num active planes 1 <7>[ 101.863848] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 101.863995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 101.864140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 101.864277] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 101.864410] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 101.864602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe A] enable: yes [modeset] <7>[ 101.864755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 101.864894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 101.865021] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 101.865169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 101.865294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 101.865416] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 101.865536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 101.865656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 101.865775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 101.865892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 101.866009] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 101.866142] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 101.866258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 101.866376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 101.866491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <6>[ 101.866648] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 101.866605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 101.866720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 101.866834] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 101.866946] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 101.867063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 101.867176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 101.867287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 101.867399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 101.867518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 101.867638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 101.867754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 101.867870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 101.867983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 101.868106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 101.868217] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 101.868323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 101.868318] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 101.868435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 101.868544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 101.868651] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 101.868757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 101.868863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 101.868968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 101.869087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 101.869193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 101.869299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 101.869402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 101.869510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 101.869620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 101.869733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 101.869845] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 101.869956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 101.870075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 101.870184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:389] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 101.870295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 101.870411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 101.870518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7>[ 101.870623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7>[ 101.870724] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7>[ 101.870823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7>[ 101.870923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7>[ 101.882334] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 101.882525] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 101.890780] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 101.892461] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 101.892724] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 101.892857] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 101.892977] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 101.893101] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 101.893209] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 101.893310] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 101.893408] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 101.893505] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 101.893601] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 101.893697] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 101.893792] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 101.893887] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 101.893984] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 101.894090] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 101.894186] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 101.894280] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 101.894375] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 101.894470] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 101.894563] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 101.894657] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 101.894752] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 101.894843] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 101.894935] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 101.895025] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 101.895121] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 101.895213] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 101.895304] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 101.895396] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 101.895485] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 101.895576] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 101.895666] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 101.895757] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 101.895848] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 101.895939] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 101.896028] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 101.900736] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 101.902560] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 101.904658] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 101.905339] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 102.089346] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 0 <7>[ 102.090842] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 102.101508] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power off <7>[ 102.101827] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 102.102038] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 102.102189] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 102.102653] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 102.154582] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 102.154914] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - short <7>[ 102.160105] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 102.160576] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 102.160526] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 102.161439] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 102.161433] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 102.161786] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:387:DDI A/PHY A] <7>[ 102.162137] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:396:DDI TC1/PHY TC1] <7>[ 102.162434] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:398:DP-MST A] <7>[ 102.162710] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DP-MST B] <7>[ 102.162974] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:400:DP-MST C] <7>[ 102.163261] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:408:DDI TC2/PHY TC2] <7>[ 102.163532] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST A] <7>[ 102.163788] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DP-MST B] <7>[ 102.164039] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:412:DP-MST C] <7>[ 102.164331] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DDI TC3/PHY TC3] <7>[ 102.164585] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST A] <7>[ 102.164831] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST B] <7>[ 102.165095] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DP-MST C] <7>[ 102.165441] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 102.167026] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turn panel power on <7>[ 102.167335] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining) <7>[ 102.189757] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 102.190073] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 102.190359] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 102.190625] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 102.299446] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 102.665332] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 102.735723] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 102.736059] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 102.736429] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 102.772517] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 102.772996] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:387:DDI A/PHY A] - long <7>[ 102.773382] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 102.773733] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:387:DDI A/PHY A] <7>[ 102.865853] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 102.865854] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 102.865913] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 102.943693] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 102.945741] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD on <7>[ 102.946074] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 102.948251] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 102.949469] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 102.950288] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 102.951317] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 102.952388] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 102.953297] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 102.953589] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 102.954903] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 102.955220] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:388:eDP-1][ENCODER:387:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 102.955956] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 102.956422] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 102.956733] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 102.957070] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:388:eDP-1] set backlight PWM = 192000 <7>[ 102.973406] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 102.975621] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:388:eDP-1] <7>[ 102.976043] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe A] <7>[ 102.977478] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 102.978852] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 102.980028] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <6>[ 102.981688] Console: switching to colour frame buffer device 180x56 <7>[ 102.981491] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:388:eDP-1] set backlight level = 13892 <6>[ 103.013860] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 103.013927] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 103.014349] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 103.014729] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 103.015093] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 103.015493] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 103.015842] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 103.016168] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 103.016491] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 103.016784] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 103.017070] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 103.017367] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 103.017626] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 103.017870] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 103.018108] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 103.018386] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 103.018609] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 103.018821] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 103.019027] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 103.019419] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 103.019615] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 103.019793] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 103.019969] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 103.020821] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 103.021051] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 103.021338] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 103.021609] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 103.021920] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 103.026811] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 103.026936] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 103.027212] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 103.027807] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 103.039940] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 103.039979] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 103.040733] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 103.040765] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 103.041640] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 103.042218] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 103.042517] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 103.042857] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 103.043745] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 103.043759] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 103.043763] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.043766] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 103.043771] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 103.043776] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.043779] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 103.043795] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.043798] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 103.043803] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.043843] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 103.044074] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 103.044336] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 103.045698] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 103.045707] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 103.045711] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.045873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 103.045899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 103.045910] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 103.045920] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 103.045930] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 103.046400] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 103.046670] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 103.046678] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 103.046683] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 103.046943] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 103.047137] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 103.047144] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 103.047149] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 103.047353] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 103.047516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 103.047521] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 103.047526] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 103.047529] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 103.047533] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 103.047686] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 103.047716] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 103.047721] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 103.047768] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 103.049492] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 103.049675] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 103.057529] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 103.074633] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 103.074661] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 103.075499] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] <7>[ 103.075528] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:388:eDP-1] <7>[ 103.076821] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 103.077575] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 103.077944] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 103.078301] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 103.078863] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 103.078875] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 103.078880] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.078883] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 103.078890] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 103.078895] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.078899] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD monitor <5>[ 103.078916] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.078920] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:388:eDP-1] ELD size 20, SAD count 0 <5>[ 103.078925] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.078975] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] VRR capable: yes <7>[ 103.079322] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 103.079630] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:388:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 103.080676] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 103.080683] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 103.080687] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 103.080836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:388:eDP-1] probed modes: <7>[ 103.080857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 103.080867] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 103.080878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] <7>[ 103.080886] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:397:DP-1] <7>[ 103.081289] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:397:DP-1] disconnected <7>[ 103.081300] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] <7>[ 103.081307] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:409:DP-2] <7>[ 103.081657] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:409:DP-2] disconnected <7>[ 103.081668] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] <7>[ 103.081677] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-3] <7>[ 103.082060] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-3] disconnected <7>[ 103.082070] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] enabled? yes <7>[ 103.082078] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:397:DP-1] enabled? no <7>[ 103.082085] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:409:DP-2] enabled? no <7>[ 103.082091] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:417:DP-3] enabled? no <7>[ 103.082337] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 103.082380] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:388:eDP-1] found preferred mode: 2880x1800 <7>[ 103.082387] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 103.082453] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:148:pipe A] desired mode 2880x1800 set (0,0) <7>[ 103.090865] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 103.092190] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 103.092563] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 103.092861] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 103.126903] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 103.127763] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 103.142227] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 103.142543] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 103.143083] [IGT] xe_module_load: exiting, ret=0 <7>[ 103.156940] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 103.158177] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 103.158622] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 103.159602] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 103.161445] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 103.163094] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 103.191218] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 103.191902] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 103.192505] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 104.146380] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 104.146422] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 104.146431] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 105.619350] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 turning VDD off <7>[ 105.620064] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:387:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067