igt@xe_configfs@ctx-restore-mid-bb on shard-lnl@IGT

Detail	Value
Duration	15.21 seconds
Hostname	shard-lnl-7
Igt-Version	IGT-Version: 2.3-g15a597610 (x86_64) (Linux: 6.19.0-rc4-lgci-xe-xe-4360-e956f808452304862+ x86_64)
Out	Using IGT_SRANDOM=1768005386 for randomisation Opened device: /dev/dri/card0 Starting subtest: ctx-restore-mid-bb Test cmd-single Test cmd-single-multi-values Test cmd-multi Test reg-single Test reg-multi Subtest ctx-restore-mid-bb: SUCCESS (15.205s)
Err	Starting subtest: ctx-restore-mid-bb Subtest ctx-restore-mid-bb: SUCCESS (15.205s)
Dmesg	<6> [454.886721] Console: switching to colour dummy device 80x25 <6> [454.887200] [IGT] xe_configfs: executing <7> [454.900696] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [454.900885] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [454.906915] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [454.909815] [IGT] xe_configfs: starting subtest ctx-restore-mid-bb <7> [454.910145] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [454.910361] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [454.910571] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [454.910763] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [454.910950] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [454.911721] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [454.911775] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [454.911891] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [454.911996] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [454.912096] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [454.912191] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [454.912304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [454.912433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [454.912563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [454.912681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [454.912796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [454.912908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [454.913252] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [454.939982] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [454.942743] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [454.943114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [454.943444] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [454.943801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [454.944116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [454.944425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [454.944758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [454.945070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [454.945384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [454.945774] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [454.946058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [454.946370] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [454.946636] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [454.946874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [454.947110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [454.947338] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [454.947562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [454.947779] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [454.948012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [454.948210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [454.948449] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [454.948753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [454.948962] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [454.949151] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [454.949340] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [454.949516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [454.949768] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [454.949968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [454.950142] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [454.950316] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [454.950490] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [454.950750] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [454.950918] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [454.951076] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [454.951232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [454.951385] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [454.951585] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [454.951757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [454.951922] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [454.952066] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [454.952337] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [454.952453] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [454.952641] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [454.952786] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [454.952940] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [454.953078] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [454.953215] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [454.953384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [454.953549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [454.953697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [454.953824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [454.953947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [454.954080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [454.954213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [454.954535] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [454.954678] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [455.162785] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [455.164422] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [455.175071] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [455.175477] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [455.175957] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [455.227818] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [455.228382] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [455.236662] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [455.237001] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [455.237057] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [455.238175] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [455.238508] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [455.239823] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [455.240055] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [455.240253] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [455.240444] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [455.240716] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [455.240942] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [455.241142] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [455.241335] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [455.241537] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [455.241761] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [455.241954] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [455.242132] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [455.242341] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [455.242554] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [455.242859] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [455.243056] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [455.243246] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [455.243631] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [455.243946] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [455.244224] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [455.244447] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [455.244764] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [455.268451] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [455.268917] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [455.269329] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [455.269782] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [455.275944] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [455.280254] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [455.284859] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [455.290774] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [455.321655] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [455.327041] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [455.402820] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [455.404627] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [455.488263] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (249 ms remaining) <7> [455.746703] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [455.767185] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [455.802456] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <7> [455.804048] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker. <6> [455.925603] xe 0000:00:02.0: Found custom settings in configfs <6> [455.925680] xe 0000:00:02.0: vgaarb: deactivate vga console <7> [455.926751] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [455.927121] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [455.927128] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [455.927197] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:*) <7> [455.927258] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [455.928221] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [455.928347] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [455.928448] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [455.928559] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [455.928666] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [455.928725] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [455.928782] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [455.928837] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [455.928891] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [455.928954] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [455.929013] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [455.929086] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [455.929157] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [455.929228] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [455.929304] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [455.929400] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [455.929489] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [455.929578] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [455.929659] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [455.929735] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [455.929808] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [455.929880] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [455.929951] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [455.930021] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [455.930091] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [455.930161] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [455.930230] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [455.930305] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [455.930396] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [455.930484] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [455.930565] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [455.930639] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [455.930707] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [455.930775] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [455.930841] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [455.930907] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [455.930974] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [455.931041] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [455.931107] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [455.931174] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [455.931240] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [455.931306] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [455.931390] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [455.931707] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [455.931809] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [455.931902] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [455.931984] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [455.932055] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [455.932124] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [455.932197] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [455.932268] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [455.932350] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [455.932446] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [455.932535] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [455.932622] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [455.932697] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [455.932768] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [455.932845] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [455.932921] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [455.932989] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [455.933055] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [455.933125] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [455.933193] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [455.933261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [455.933328] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [455.933562] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [455.933636] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [455.933703] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [455.933768] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [455.933839] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [455.934175] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [455.934273] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [455.934539] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [455.934622] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [455.934734] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [455.934857] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [455.935005] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [455.935095] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [455.935169] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [455.935244] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [455.935351] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [455.935466] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [455.935585] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [455.935711] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [455.935823] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [455.935940] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [455.936427] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [455.937148] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [455.937242] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [455.937318] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [455.937419] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [455.937513] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [455.937607] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [455.937632] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [455.937699] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [455.937771] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [455.937776] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [455.937849] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [455.937850] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [455.937918] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [455.937924] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [455.937986] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [455.937998] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [455.938051] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [455.938071] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [455.938114] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [455.938144] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [455.938177] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [455.938217] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [455.938239] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [455.938300] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [455.938297] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [455.938378] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [455.938451] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [455.938441] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [455.938522] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [455.938541] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [455.938591] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [455.938638] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [455.938719] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [455.938793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [455.938865] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [455.938939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [455.939029] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [455.939115] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [455.939200] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [455.939284] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [455.939367] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [455.939456] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [455.939545] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [455.939634] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [455.943406] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7> [455.948933] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [455.949059] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [455.949168] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [455.949323] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [455.949493] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [455.949624] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [455.949744] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [455.949850] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [455.949958] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [455.950059] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [455.950159] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [455.950257] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [455.950359] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [455.950456] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [455.950557] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [455.950750] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [455.950837] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [455.950922] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [455.951008] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [455.951091] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <6> [455.951235] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [455.951204] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [455.951313] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [455.952345] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [455.952432] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [455.952539] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [455.962376] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [455.962491] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [455.962573] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [456.206342] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [456.218333] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [456.242310] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [456.278282] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [456.290279] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [456.350279] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [456.698198] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [456.698210] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [456.698212] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [456.698214] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [456.698216] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [456.698218] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [456.698220] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [456.698222] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [456.698223] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [456.698225] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [456.698282] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [456.698283] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [456.698284] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [456.698306] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [456.698389] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [456.710175] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [456.722180] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [456.722269] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [456.722351] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [456.722431] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [456.722514] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [456.722676] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [456.722752] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [456.722825] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [456.722889] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [456.722952] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [456.723046] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [456.723268] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [456.723392] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [456.723504] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [456.723883] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [456.723985] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [456.724073] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [456.724320] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [456.724435] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [456.724529] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [456.724860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [456.724944] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [456.725027] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [456.725093] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [456.725163] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [456.725228] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [456.725297] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [456.725362] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [456.725424] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [456.725486] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [456.725547] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [456.725608] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [456.725668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [456.725728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [456.725787] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [456.725846] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [456.725905] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [456.725963] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [456.726023] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [456.726085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [456.726147] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [456.726223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [456.726289] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [456.726351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [456.726412] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [456.726473] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [456.726534] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [456.726595] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [456.726650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [456.726706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [456.726760] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [456.726819] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [456.726886] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [456.726951] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [456.727015] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [456.727078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [456.727134] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [456.727206] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [456.727283] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [456.727359] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [456.727438] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [456.727517] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [456.727596] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [456.727670] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [456.727748] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [456.727816] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [456.727882] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [456.727944] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [456.728003] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [456.728060] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [456.728117] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [456.728186] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [456.728248] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [456.728309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [456.728369] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [456.728429] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [456.728488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [456.728543] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [456.728597] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [456.728651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [456.728705] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [456.728761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [456.728818] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [456.728875] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [456.728931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [456.728986] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [456.729040] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [456.729094] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [456.729148] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [456.729228] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [456.729286] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [456.729342] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [456.729400] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [456.729488] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [456.729568] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [456.729659] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [456.729763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [456.729838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [456.729912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [456.729985] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [456.731463] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [456.733721] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [456.733803] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [456.733853] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [456.733902] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [456.733949] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [456.733995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [456.734041] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [456.734087] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [456.734132] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [456.734207] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [456.734257] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [456.734306] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [456.734355] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [456.734405] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [456.734454] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [456.734537] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [456.745241] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [456.745964] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [456.746034] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [456.746084] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [456.746132] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [456.746208] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [456.746257] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [457.271140] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [457.271145] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [457.271146] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [457.271308] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [457.271402] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [457.271483] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [457.271549] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [457.271662] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [457.271762] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [457.271874] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [457.271933] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [457.271994] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [457.272073] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [457.273132] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [457.273201] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [457.273282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [457.273357] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [457.273421] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [457.273484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [457.273543] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [457.273603] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [457.273660] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [457.273715] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [457.273771] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [457.273826] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [457.273880] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [457.273933] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [457.273986] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [457.274045] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [457.274106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [457.274158] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [457.274214] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [457.274271] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [457.274323] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [457.274374] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [457.274426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [457.274477] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [457.274528] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [457.274578] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [457.274636] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [457.274694] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [457.274750] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [457.274807] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [457.274862] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [457.274917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [457.274974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [457.275036] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [457.275092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [457.275161] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [457.275234] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [457.275301] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [457.275358] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [457.275415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [457.275598] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [457.275652] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [457.275705] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [457.275757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [457.275887] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [457.275940] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [457.275991] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [457.276050] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [457.276199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [457.276269] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [457.276325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [457.276376] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [457.276429] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [457.276480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [457.276532] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [457.276829] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [457.276928] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [457.276977] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [457.277027] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [457.277075] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [457.277124] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [457.277180] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [457.277240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [457.277294] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [457.277339] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [457.277384] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [457.277428] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [457.277472] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [457.277516] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [457.277559] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [457.277623] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [457.277688] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [457.278125] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [457.280478] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [457.298002] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [457.309172] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [457.309528] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [457.310461] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [457.310555] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [457.310615] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [457.310671] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [457.310728] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [457.310784] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [457.310838] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [457.310895] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [457.310953] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [457.313301] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [457.313383] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [457.313444] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [457.315388] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [457.315474] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [457.317653] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [457.321917] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [457.322144] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [457.322253] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [457.322352] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [457.322447] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [457.322542] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [457.322638] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [457.322741] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [457.322854] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [457.322966] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [457.323126] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [457.323241] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [457.323343] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [457.323443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [457.324423] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [457.327290] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [457.328982] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [457.329230] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [457.329455] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [457.351274] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [457.351801] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [457.351988] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [457.352226] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [457.352381] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [457.352530] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [457.352701] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [457.352865] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [457.352871] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [457.352876] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [457.352880] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [457.352883] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [457.352888] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [457.352892] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [457.352897] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [457.352901] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [457.352906] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [457.353222] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [457.353420] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [457.353634] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [457.353831] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [457.354056] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [457.354289] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [457.354485] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [457.354681] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [457.354861] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [457.355091] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [457.355511] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [457.355681] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [457.355874] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [457.356147] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [457.356346] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [457.356544] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [457.356730] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [457.356928] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [457.357157] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [457.357375] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [457.357704] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [457.359688] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [457.359856] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [457.360037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [457.360197] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [457.360351] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [457.360511] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [457.360660] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [457.360845] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [457.361015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [457.361154] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [457.361296] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [457.361435] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [457.361572] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [457.361702] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [457.361829] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [457.361953] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [457.362099] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [457.362223] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [457.362344] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [457.362462] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [457.362591] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [457.362724] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [457.362838] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [457.362949] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [457.363079] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [457.363185] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [457.363286] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [457.363388] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [457.363486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [457.363597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [457.363723] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [457.363851] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [457.363956] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [457.364092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [457.364211] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [457.364308] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [457.364404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [457.364497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [457.364589] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [457.364680] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [457.365359] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [457.365462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [457.365560] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [457.365648] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [457.365731] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [457.365814] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [457.365894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [457.365972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [457.366067] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [457.366148] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [457.366227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [457.366305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [457.366838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [457.366918] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [457.366999] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [457.367822] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [457.367937] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [457.368000] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [457.368088] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [457.368148] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [457.368206] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [457.368263] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [457.368320] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [457.368377] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [457.368432] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [457.368486] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [457.368540] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [457.368593] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [457.368646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [457.368697] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [457.368781] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [457.368874] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [457.371014] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [457.391094] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [457.412286] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [457.412744] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [457.414302] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [457.414457] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [457.417897] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [457.418067] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [457.421865] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [457.422016] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [457.466076] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [457.467852] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [457.468331] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [457.468731] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [457.469145] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [457.469703] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [457.470047] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [457.470417] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [457.471692] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [457.472227] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [457.472735] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [457.473274] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [457.473718] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [457.474142] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [457.474520] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [457.474894] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [457.475336] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [457.475704] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [457.476163] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [457.476593] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [457.476990] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [457.477316] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [457.477637] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [457.478416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [457.478760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [457.479086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [457.479386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [457.479665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [457.480111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [457.480414] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [457.480677] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [457.481043] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [457.482198] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [457.482481] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [457.482704] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [457.490115] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [457.491580] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [457.491725] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [457.492068] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [457.492902] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [457.492969] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [457.493532] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [457.494203] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [457.494249] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [457.494680] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [457.495322] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [457.495358] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [457.495780] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [457.496692] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [457.496724] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [457.496729] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [457.506743] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [457.510750] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 <7> [457.512039] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [457.512172] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [457.512666] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [457.513898] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [457.514147] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [457.514274] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [457.514363] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [457.514471] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [457.514555] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [457.514629] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [457.514727] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [457.514804] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [457.514888] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [457.515324] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [457.515407] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [457.515484] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [457.515557] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [457.515765] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [457.515820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [457.515826] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [457.516310] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [457.516602] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [457.516703] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [457.516803] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [457.516911] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [457.516915] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [457.516917] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.516918] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [457.516921] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [457.516922] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.516924] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [457.516926] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.516927] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [457.516929] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.516946] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [457.517050] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [457.517149] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [457.517618] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [457.517630] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [457.517839] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [457.517842] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [457.517844] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.517891] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [457.517895] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [457.517899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [457.517903] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [457.517906] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [457.518091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [457.518096] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [457.518099] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [457.518221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [457.518225] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [457.518228] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [457.518346] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [457.518349] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [457.518352] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [457.518355] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [457.518357] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [457.518374] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [457.518387] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [457.518390] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [457.518402] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [457.518462] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [457.518468] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [457.525319] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [457.525764] fbcon: xedrmfb (fb0) is primary device <7> [457.526689] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [457.526804] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [457.526909] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [457.527037] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [457.527143] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [457.527247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [457.527347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [457.527447] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [457.527546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [457.527644] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [457.527742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [457.527838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [457.527932] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [457.528042] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [457.528137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [457.528230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [457.528323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [457.528415] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [457.528508] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [457.528600] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [457.528692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [457.528784] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [457.528876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [457.528975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [457.529068] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [457.529161] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [457.529256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [457.529348] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [457.529441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [457.529520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [457.529613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [457.529703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [457.529794] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [457.529883] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [457.529959] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [457.530064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [457.530153] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [457.530241] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [457.530321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [457.530395] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [457.530469] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [457.530542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [457.530617] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [457.530689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [457.530761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [457.530834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [457.530905] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [457.530983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [457.531069] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [457.531155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [457.531240] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [457.531324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [457.531410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [457.531498] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [457.531587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [457.531675] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [457.531757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [457.531830] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [457.531903] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [457.531986] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [457.532074] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [457.532160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [457.532246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [457.532333] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [457.532420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [457.532507] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [457.532594] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [457.532679] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [457.532764] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [457.532845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [457.532916] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [457.533034] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [457.533121] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [457.533330] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [457.533418] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [457.533509] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [457.533589] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [457.533661] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [457.533732] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [457.533803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [457.533873] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [457.533969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [457.534072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [457.534171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [457.534269] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [457.534365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [457.534459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [457.534556] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [457.534677] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [457.534775] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [457.534871] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [457.534970] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [457.535251] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [457.535368] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [457.535475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [457.535576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [457.535675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [457.535770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [457.535865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [457.535958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [457.536077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [457.536171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [457.536264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [457.536356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [457.536447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [457.536537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [457.536626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [457.536716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [457.536806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [457.536895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [457.536991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [457.537079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [457.537167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [457.537255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [457.537343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [457.537417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [457.537490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [457.537564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [457.537638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [457.537712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [457.537786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [457.537871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [457.537976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [457.538075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [457.538180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [457.538272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [457.538359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [457.538449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [457.538539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [457.538621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [457.538696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [457.538768] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [457.538841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [457.538926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [457.539032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [457.539120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [457.539205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [457.539290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [457.539376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [457.539463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [457.539549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [457.539628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [457.539698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [457.539769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [457.539852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [457.539935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [457.540034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [457.540118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [457.540202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [457.540280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [457.540350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [457.540420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [457.540490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [457.540562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [457.540633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [457.540705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [457.540775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [457.540844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [457.540914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [457.541001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [457.541257] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [457.541354] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [457.541456] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [457.541541] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [457.541624] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [457.541699] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [457.541783] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [457.541865] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [457.541946] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [457.542044] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [457.542123] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [457.542202] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [457.542280] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [457.542357] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [457.542440] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [457.542526] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [457.542600] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [457.542685] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [457.542827] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [457.542893] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [457.542995] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [457.543092] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [457.544235] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [457.544325] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [457.544415] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [457.553993] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [457.554139] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [457.554261] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <6> [457.577493] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [457.577851] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [457.600788] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [457.765959] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [457.767554] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [457.768571] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [457.769339] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [457.770484] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [457.771548] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [457.772794] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [457.773225] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [457.774774] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [457.775369] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [457.776330] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [457.776932] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [457.777422] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [457.777994] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [457.793775] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [457.796811] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [457.797337] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [457.798685] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [457.800949] Console: switching to colour frame buffer device 180x56 <6> [457.849693] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [457.849716] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [457.850273] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [457.850722] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [457.851194] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [457.851611] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [457.852040] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [457.852438] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [457.852824] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [457.853290] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [457.853676] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [457.854096] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [457.854547] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [457.854922] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [457.855280] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [457.855635] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [457.856022] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [457.856340] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [457.856679] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [457.857024] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [457.857339] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [457.857647] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [457.857948] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [457.859360] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [457.859572] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [457.859841] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [457.860146] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [457.860445] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [457.860461] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [457.860571] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [457.860585] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [457.863409] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [457.863615] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [457.863776] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [457.863950] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [457.864112] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [457.866428] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [457.866730] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [457.866839] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [457.867120] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [457.867439] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [457.867454] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [457.867460] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.867464] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [457.867473] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [457.867480] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.867486] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [457.867494] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.867498] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [457.867506] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.867539] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [457.867839] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [457.867901] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [457.868022] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [457.868530] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [457.868532] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [457.868533] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [457.868587] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [457.868591] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [457.868594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [457.868599] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [457.868603] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [457.868761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [457.868765] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [457.868768] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [457.868889] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [457.869146] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [457.869448] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [457.870351] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [457.870714] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [457.871127] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [457.871463] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [457.871968] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [457.871982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [457.871989] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [457.872220] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [457.872226] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [457.872232] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [457.872236] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [457.872240] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [457.872273] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [457.872292] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [457.872297] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [457.872321] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [457.877129] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [457.914674] Console: switching to colour dummy device 80x25 <7> [457.927151] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [457.927279] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [457.927613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [457.927934] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [457.928188] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [457.928481] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [457.928797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [457.929239] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [457.929631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [457.930058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [457.930457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [457.930826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [457.932134] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [457.943735] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [457.946354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [457.946857] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [457.947437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [457.947895] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [457.948324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [457.948798] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [457.949312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [457.949755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [457.950196] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [457.950646] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [457.951113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [457.951493] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [457.951933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [457.952320] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [457.952736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [457.953107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [457.953432] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [457.953758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [457.954185] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [457.954542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [457.954879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [457.955194] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [457.955490] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [457.955785] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [457.956268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [457.956624] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [457.957003] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [457.957266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [457.957516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [457.957766] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [457.958092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [457.958331] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [457.958558] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [457.958778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [457.959043] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [457.959244] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [457.959440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [457.959629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [457.959818] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [457.960034] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [457.960380] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [457.960584] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [457.960826] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [457.961100] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [457.961330] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [457.961548] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [457.961760] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [457.962061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [457.962316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [457.962548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [457.962782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [457.963037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [457.963284] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [457.963502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [457.963963] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [457.964155] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [458.013019] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [458.170125] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [458.170541] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [458.181245] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [458.181689] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [458.181649] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [458.182176] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [458.182670] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [458.233300] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [458.233639] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [458.233710] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [458.234127] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [458.234872] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [458.234824] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [458.235236] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [458.235579] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [458.235832] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [458.236046] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [458.235737] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [458.236254] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [458.236497] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [458.236707] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [458.236921] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [458.237135] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [458.237322] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [458.237496] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [458.237673] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [458.237930] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [458.238119] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [458.238299] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [458.238564] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [458.238769] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [458.239021] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [458.239478] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [458.239823] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [458.240122] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [458.240360] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [458.240652] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [458.268018] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [458.274637] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [458.275301] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [458.275889] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [458.276939] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [458.279039] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [458.289241] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [458.299055] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [458.338708] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [458.340175] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [458.413934] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [458.417427] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [458.502143] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (232 ms remaining) <7> [458.737791] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [458.748500] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [458.749817] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [458.757790] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [458.764145] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [458.792587] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <7> [458.796796] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker. <6> [458.858430] xe 0000:00:02.0: Found custom settings in configfs <6> [458.858500] xe 0000:00:02.0: vgaarb: deactivate vga console <7> [458.859883] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [458.860387] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [458.860398] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [458.860493] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [458.860576] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [458.861723] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [458.861882] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [458.861993] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [458.862108] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [458.862235] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [458.862313] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [458.862385] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [458.862456] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [458.862526] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [458.862623] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [458.862718] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [458.862818] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [458.862913] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [458.863006] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [458.863104] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [458.863224] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [458.863342] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [458.863458] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [458.863569] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [458.863685] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [458.863796] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [458.863908] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [458.864018] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [458.864128] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [458.864238] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [458.864347] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [458.864457] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [458.864566] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [458.864680] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [458.864790] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [458.864901] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [458.865010] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [458.865119] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [458.865228] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [458.865337] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [458.865447] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [458.865556] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [458.865709] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [458.865819] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [458.865929] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [458.866037] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [458.866145] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [458.866260] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [458.866658] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [458.866822] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [458.866960] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [458.867087] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [458.867211] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [458.867331] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [458.867456] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [458.867571] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [458.868677] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [458.868835] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [458.868958] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [458.869076] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [458.869192] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [458.869312] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [458.869428] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [458.869534] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [458.869657] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [458.869773] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [458.869895] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [458.870008] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [458.870118] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [458.870227] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [458.870333] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [458.870440] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [458.870544] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [458.870656] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [458.870786] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [458.870927] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [458.871067] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [458.871367] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [458.871487] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [458.871653] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [458.871792] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [458.871969] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [458.872094] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [458.872203] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [458.872314] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [458.872458] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [458.872603] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [458.872767] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [458.872911] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [458.873049] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [458.873189] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [458.873931] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [458.875632] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [458.875813] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [458.875912] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [458.876010] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [458.876106] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [458.876202] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [458.876310] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [458.876408] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [458.876502] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [458.876598] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [458.876715] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [458.876816] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [458.876913] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [458.877009] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [458.877078] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [458.877112] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [458.877206] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [458.877252] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [458.877303] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [458.877348] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [458.877398] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [458.877431] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [458.877492] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [458.877508] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [458.877582] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [458.877586] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [458.877670] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [458.877750] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [458.877825] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [458.877826] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [458.877898] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [458.877921] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [458.877970] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [458.878023] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [458.878041] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [458.878111] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [458.878117] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [458.878181] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [458.878211] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [458.878307] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [458.878405] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [458.878500] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [458.878595] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [458.878698] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [458.885243] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7> [458.890220] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [458.890327] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [458.890420] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <6> [458.890476] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [458.890540] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [458.890794] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [458.890923] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [458.891014] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [458.891098] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [458.891190] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [458.891276] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [458.891359] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [458.891436] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [458.891512] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [458.891588] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [458.891690] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [458.891798] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [458.891887] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [458.891972] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [458.892047] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [458.892115] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [458.892225] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [458.892334] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [458.893644] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [458.893731] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [458.893840] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [458.903681] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [458.903831] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [458.903912] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [459.141651] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [459.153631] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [459.177603] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [459.213584] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [459.225572] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [459.285576] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [459.633481] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [459.633494] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [459.633497] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [459.633498] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [459.633501] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [459.633502] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [459.633504] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [459.633506] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [459.633507] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [459.633509] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [459.633556] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [459.633557] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [459.633558] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [459.633577] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [459.633666] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [459.645462] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [459.657468] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [459.657569] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [459.657656] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [459.657737] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [459.657822] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [459.657995] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [459.658070] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [459.658143] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [459.658213] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [459.658275] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [459.658369] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [459.658601] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [459.658731] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [459.658854] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [459.659319] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [459.659464] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [459.659579] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [459.659820] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [459.659921] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [459.660010] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [459.660329] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [459.660423] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [459.660533] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [459.660619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [459.660691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [459.660762] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [459.660827] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [459.660890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [459.660952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [459.661014] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [459.661075] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [459.661136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [459.661198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [459.661268] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [459.661337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [459.661403] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [459.661476] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [459.661542] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [459.661609] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [459.661674] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [459.661736] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [459.661799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [459.661860] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [459.661922] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [459.661985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [459.662047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [459.662109] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [459.662173] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [459.662235] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [459.662300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [459.662366] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [459.662429] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [459.662511] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [459.662573] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [459.662641] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [459.662715] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [459.662789] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [459.662873] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [459.662977] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [459.663080] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [459.663179] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [459.663263] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [459.663340] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [459.663413] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [459.663513] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [459.663579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [459.663648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [459.663716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [459.663781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [459.663843] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [459.663916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [459.663989] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [459.664059] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [459.664128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [459.664196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [459.664258] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [459.664312] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [459.664366] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [459.664425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [459.664510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [459.664571] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [459.664634] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [459.664698] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [459.664759] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [459.664819] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [459.664878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [459.664936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [459.664990] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [459.665044] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [459.665103] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [459.665162] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [459.665219] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [459.665275] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [459.665359] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [459.665455] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [459.665880] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [459.665999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [459.666085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [459.666160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [459.666235] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [459.667704] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [459.669969] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [459.670055] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [459.670112] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [459.670165] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [459.670212] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [459.670259] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [459.670305] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [459.670350] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [459.670396] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [459.670449] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [459.670494] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [459.670542] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [459.670599] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [459.670647] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [459.670692] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [459.670769] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [459.681598] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [459.682252] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [459.682330] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [459.682384] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [459.682446] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [459.682495] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [459.682549] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [460.199370] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [460.199376] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [460.199377] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [460.199524] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [460.199617] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [460.199696] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [460.199761] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [460.199868] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [460.199962] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [460.200068] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [460.200126] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [460.200192] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [460.200257] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [460.201249] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [460.201339] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [460.201419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [460.201480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [460.201541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [460.201600] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [460.201656] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [460.201716] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [460.201773] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [460.201828] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [460.201884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [460.201939] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [460.201993] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [460.202046] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [460.202099] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [460.202152] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [460.202204] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [460.202256] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [460.202312] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [460.202364] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [460.202426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [460.202479] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [460.202535] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [460.202587] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [460.202639] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [460.202690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [460.202747] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [460.202805] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [460.202861] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [460.202919] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [460.202974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [460.203029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [460.203086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [460.203143] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [460.203200] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [460.203257] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [460.203321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [460.203382] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [460.203441] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [460.203503] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [460.203699] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [460.203764] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [460.203824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [460.203883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [460.204026] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [460.204088] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [460.204147] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [460.204199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [460.204332] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [460.204388] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [460.204443] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [460.204505] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [460.204562] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [460.204614] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [460.204666] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [460.204942] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [460.205037] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [460.205087] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [460.205135] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [460.205182] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [460.205229] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [460.205275] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [460.205335] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [460.205382] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [460.205429] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [460.205480] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [460.205528] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [460.205573] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [460.205617] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [460.205661] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [460.205725] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [460.205791] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [460.206205] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [460.208681] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [460.226597] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [460.237748] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [460.238104] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [460.239169] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [460.239256] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [460.239333] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [460.239389] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [460.239444] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [460.239498] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [460.239552] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [460.239607] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [460.239665] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [460.241760] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [460.241843] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [460.241904] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [460.243278] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [460.243385] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [460.245894] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [460.249769] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [460.249878] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [460.249980] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [460.250062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [460.250142] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [460.250223] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [460.250328] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [460.250410] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [460.250490] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [460.250569] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [460.250648] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [460.250727] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [460.250805] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [460.250883] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [460.251576] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [460.253359] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [460.254504] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [460.254625] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [460.254770] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [460.276404] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [460.276940] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [460.277139] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [460.277329] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [460.277485] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [460.277637] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [460.277828] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [460.278027] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [460.278033] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [460.278038] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [460.278043] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [460.278048] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [460.278053] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [460.278057] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [460.278061] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [460.278067] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [460.278072] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [460.278422] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [460.278651] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [460.278889] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [460.279109] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [460.279340] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [460.279572] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [460.279777] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [460.279986] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [460.280203] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [460.280474] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [460.280948] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [460.281139] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [460.281356] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [460.281562] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [460.281768] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [460.281953] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [460.282140] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [460.282346] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [460.282529] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [460.282753] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [460.283051] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [460.284862] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [460.285039] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [460.285187] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [460.285362] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [460.285501] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [460.285640] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [460.285770] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [460.285908] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [460.286035] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [460.286158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [460.286297] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [460.286423] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [460.286546] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [460.286663] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [460.286776] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [460.286904] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [460.287032] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [460.287146] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [460.287253] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [460.287395] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [460.287517] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [460.287642] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [460.287754] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [460.287855] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [460.287955] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [460.288051] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [460.288142] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [460.288242] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [460.288379] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [460.288490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [460.288593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [460.288691] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [460.288785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [460.288880] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [460.288972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [460.289064] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [460.289155] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [460.289245] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [460.289369] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [460.289454] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [460.290136] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [460.290221] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [460.290325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [460.290406] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [460.290482] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [460.290558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [460.290631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [460.290704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [460.290777] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [460.290851] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [460.290926] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [460.290997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [460.291629] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [460.291752] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [460.291854] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [460.292623] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [460.292743] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [460.292809] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [460.292871] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [460.292931] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [460.292987] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [460.293043] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [460.293098] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [460.293152] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [460.293205] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [460.293258] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [460.293337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [460.293391] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [460.293446] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [460.293503] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [460.293576] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [460.293657] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [460.295432] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [460.326647] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [460.347410] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [460.347936] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [460.350316] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [460.350684] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [460.356620] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [460.356912] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [460.361243] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [460.361556] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [460.407449] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [460.408691] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [460.408925] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [460.409136] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [460.409367] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [460.409711] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [460.409916] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [460.410087] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [460.410696] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [460.410965] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [460.411219] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [460.411538] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [460.411798] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [460.412058] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [460.412339] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [460.412626] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [460.412905] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [460.413177] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [460.413545] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [460.413836] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [460.414158] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [460.414463] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [460.414779] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [460.415389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [460.415699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [460.415977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [460.416266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [460.416569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [460.416931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [460.417209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [460.417532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [460.418026] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [460.418345] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [460.418697] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [460.419001] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [460.431292] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [460.432896] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [460.433046] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [460.433446] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [460.434198] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [460.434250] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [460.434718] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [460.435619] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [460.435679] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [460.436239] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [460.436889] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [460.436926] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [460.437399] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [460.438017] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [460.438051] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [460.438058] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [460.448679] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [460.452226] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17 <7> [460.452929] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [460.453062] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [460.453817] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [460.455089] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [460.455662] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [460.455735] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [460.455812] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [460.455890] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [460.456083] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [460.456286] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [460.456414] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [460.456516] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [460.456640] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [460.456736] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [460.456819] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [460.456922] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [460.457000] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [460.457163] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [460.457179] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [460.457195] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [460.458054] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [460.458380] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [460.458494] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [460.458599] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [460.458731] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [460.458740] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.458743] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.458745] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [460.458748] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [460.458751] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.458753] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [460.458756] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.458758] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [460.458760] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.458785] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [460.458889] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [460.458987] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [460.459465] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [460.459485] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [460.459592] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.459596] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.459598] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.459674] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [460.459680] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [460.459684] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [460.459689] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [460.459695] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [460.459838] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [460.459845] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [460.459849] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [460.459974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [460.459978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [460.459982] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [460.460107] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [460.460112] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [460.460116] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [460.460119] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [460.460122] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [460.460149] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [460.460169] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [460.460173] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [460.460191] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [460.460280] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [460.460291] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [460.493913] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [460.495166] fbcon: xedrmfb (fb0) is primary device <7> [460.496085] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [460.496200] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [460.496386] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [460.496519] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [460.496636] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [460.496736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [460.496840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [460.496966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [460.497111] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [460.497285] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [460.497433] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [460.497579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [460.497722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [460.497865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [460.498006] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [460.498153] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [460.498326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [460.498470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [460.498613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [460.498757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [460.498921] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [460.499082] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [460.499243] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [460.499402] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [460.499542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [460.499682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [460.499887] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [460.500036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [460.500177] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [460.500326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [460.500451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [460.500575] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [460.500695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [460.500817] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [460.500939] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [460.501080] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [460.501245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [460.501371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [460.501495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [460.501619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [460.501742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [460.501865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [460.501991] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [460.502116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [460.502264] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [460.502391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [460.502518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [460.502644] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [460.502770] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [460.502899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [460.503029] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [460.503162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [460.503338] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [460.503472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [460.503606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [460.503739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [460.503869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [460.503998] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [460.504126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [460.504270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [460.504397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [460.504523] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [460.504648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [460.504773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [460.504898] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [460.505014] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [460.505129] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [460.505266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [460.505383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [460.505500] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [460.505616] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [460.505732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [460.505849] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [460.506791] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [460.506971] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [460.507136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [460.507303] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [460.507434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [460.507561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [460.507686] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [460.507827] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [460.507975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [460.508082] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [460.508181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [460.508303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [460.508405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [460.508505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [460.508736] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [460.508865] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [460.508964] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [460.509045] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [460.509125] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [460.509229] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [460.509325] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [460.509428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [460.509529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [460.509620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [460.509695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [460.509769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [460.509842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [460.509914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [460.509986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [460.510057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [460.510129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [460.510200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [460.510302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [460.510398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [460.510494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [460.510574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [460.510646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [460.510718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [460.510790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [460.510861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [460.510931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [460.511001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [460.511070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [460.511139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [460.511208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [460.511313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [460.511403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [460.511491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [460.511568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [460.511642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [460.511708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [460.511775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [460.511842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [460.511908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [460.511975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [460.512041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [460.512108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [460.512175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [460.512258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [460.512344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [460.512429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [460.512514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [460.512582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [460.512647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [460.512712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [460.512776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [460.512841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [460.512905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [460.512970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [460.513034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [460.513099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [460.513163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [460.513232] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [460.513315] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [460.513401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [460.513489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [460.513567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [460.513635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [460.513704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <6> [460.513753] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [460.513772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [460.513850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [460.513920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [460.513969] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [460.513989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [460.514058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [460.514123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [460.514189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [460.514287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [460.514571] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [460.514946] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [460.515028] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [460.515101] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [460.515177] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [460.515261] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [460.515349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [460.515435] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [460.515521] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [460.515601] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [460.515666] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [460.515729] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [460.515790] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [460.515852] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [460.515912] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [460.515972] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [460.516029] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [460.516100] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [460.516236] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [460.516315] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [460.516424] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [460.516520] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [460.517418] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [460.517508] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [460.517595] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [460.527305] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [460.527443] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [460.527559] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [460.536534] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [460.737979] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [460.739784] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [460.740873] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [460.741741] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [460.742900] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [460.743923] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [460.745050] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [460.745430] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [460.746871] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [460.747222] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [460.748047] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [460.748551] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [460.748933] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [460.749416] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [460.765434] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [460.767206] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [460.767717] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [460.769281] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [460.771618] Console: switching to colour frame buffer device 180x56 <6> [460.821324] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [460.821352] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [460.821898] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [460.822467] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [460.822970] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [460.823493] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [460.823944] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [460.824452] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [460.824916] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [460.825364] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [460.825807] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [460.826219] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [460.826608] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [460.826959] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [460.827318] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [460.827639] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [460.827958] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [460.828293] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [460.828583] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [460.828850] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [460.829103] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [460.829404] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [460.829638] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [460.830869] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [460.831087] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [460.831395] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [460.831680] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [460.831953] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [460.832228] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [460.832464] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [460.832699] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [460.832919] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [460.838058] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [460.839947] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [460.840329] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [460.840640] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [460.840968] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [460.841316] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [460.841621] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [460.841936] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [460.865682] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [460.865717] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [460.866609] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [460.866645] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [460.867690] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [460.868275] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [460.868659] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [460.869015] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [460.869767] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [460.869787] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.869795] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.869799] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [460.869810] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [460.869818] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.869825] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [460.869856] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.869861] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [460.869871] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.869957] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [460.870388] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [460.870757] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [460.872275] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.872286] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.872295] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.872516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [460.872555] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [460.872573] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [460.872590] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [460.872607] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [460.873379] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [460.873404] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [460.873425] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [460.873998] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [460.874013] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [460.874025] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [460.874584] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [460.874598] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [460.874613] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [460.874624] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [460.874634] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [460.875049] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [460.875110] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [460.875136] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [460.875245] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [460.883165] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [460.898616] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [460.898645] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [460.898822] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [460.898843] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [460.901269] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [460.902410] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [460.903060] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [460.903511] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [460.903963] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [460.903981] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.903988] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.903992] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [460.904001] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [460.904007] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.904013] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [460.904020] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.904025] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [460.904032] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.904077] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [460.904342] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [460.904584] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [460.905299] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.905306] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [460.905311] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [460.905448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [460.905459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [460.905467] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [460.905478] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [460.905488] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [460.905738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [460.905749] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [460.905757] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [460.906245] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [460.906271] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [460.906292] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [460.906928] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [460.906948] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [460.906964] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [460.906977] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [460.906988] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [460.907093] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [460.907197] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [460.907215] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [460.907284] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [460.915529] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [460.944850] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <6> [460.988934] Console: switching to colour dummy device 80x25 <7> [460.998862] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [460.999031] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [460.999576] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [460.999966] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [461.000747] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [461.001128] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [461.001550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [461.002031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [461.002570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [461.003030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [461.003561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [461.003996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [461.005272] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [461.015477] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [461.021030] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [461.021311] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [461.021530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [461.021733] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [461.021942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [461.022173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [461.022341] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [461.022509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [461.022669] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [461.022823] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [461.022975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [461.023146] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [461.023287] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [461.023425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [461.023557] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [461.023687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [461.023818] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [461.024066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [461.024450] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [461.024732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [461.025010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [461.025356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [461.025633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [461.025907] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [461.026044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [461.026443] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [461.026580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [461.026714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [461.026847] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [461.026984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [461.027124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [461.027228] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [461.027332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [461.027430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [461.027527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [461.027622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [461.027715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [461.027807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [461.027899] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [461.027988] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [461.028309] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [461.028400] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [461.028516] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [461.028602] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [461.028692] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [461.028775] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [461.028857] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [461.028952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [461.029029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [461.029119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [461.029215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [461.029309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [461.029402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [461.029489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [461.029692] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [461.029779] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [461.233206] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [461.233631] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [461.254135] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [461.254624] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [461.255111] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [461.306387] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [461.306704] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [461.306984] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [461.307952] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [461.308037] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [461.308376] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [461.308824] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [461.309165] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [461.309287] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [461.309430] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [461.309685] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [461.309953] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [461.310330] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [461.310598] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [461.310861] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [461.311157] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [461.311432] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [461.311682] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [461.311929] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [461.312213] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [461.312458] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [461.312790] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [461.313063] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [461.313353] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [461.313832] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [461.314386] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [461.314786] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [461.315220] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [461.315641] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [461.347476] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [461.347972] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [461.348397] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [461.348809] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [461.355488] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [461.361811] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [461.373617] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [461.381341] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [461.427012] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [461.427526] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [461.496375] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [461.498946] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [461.574834] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (232 ms remaining) <7> [461.808998] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [461.885230] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [461.886051] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [461.894558] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [461.900388] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [461.913105] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <7> [461.919606] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker. <6> [461.980480] xe 0000:00:02.0: Found custom settings in configfs <6> [461.980518] xe 0000:00:02.0: vgaarb: deactivate vga console <7> [461.981975] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [461.982397] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [461.982406] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [461.982495] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [461.982565] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [461.983587] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [461.983727] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [461.983840] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [461.983953] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [461.984064] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [461.984146] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [461.984224] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [461.984299] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [461.984361] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [461.984433] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [461.984506] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [461.984599] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [461.984691] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [461.984774] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [461.984868] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [461.984978] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [461.985085] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [461.985181] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [461.985262] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [461.985344] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [461.985426] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [461.985505] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [461.985580] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [461.985651] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [461.985722] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [461.985799] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [461.985897] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [461.985990] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [461.986069] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [461.986147] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [461.986237] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [461.986325] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [461.986411] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [461.986485] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [461.986558] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [461.986625] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [461.986699] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [461.986773] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [461.986865] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [461.986953] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [461.987041] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [461.987127] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [461.987209] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [461.987590] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [461.987691] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [461.987780] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [461.987909] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [461.988006] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [461.988109] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [461.988194] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [461.988273] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [461.988347] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [461.988432] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [461.988507] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [461.988583] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [461.988674] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [461.988766] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [461.988880] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [461.988968] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [461.989055] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [461.989148] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [461.989232] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [461.989308] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [461.989381] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [461.989462] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [461.989545] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [461.989628] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [461.989709] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [461.989780] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [461.989882] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [461.990003] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [461.990129] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [461.990384] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [461.990481] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [461.990623] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [461.990727] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [461.990871] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [461.991000] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [461.991101] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [461.991197] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [461.991298] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [461.991405] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [461.991514] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [461.991646] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [461.991757] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [461.991874] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [461.992346] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [461.993509] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [461.993620] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [461.993696] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [461.993769] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [461.993856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [461.993956] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [461.994067] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [461.994155] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [461.994230] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [461.994306] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [461.994382] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [461.994459] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [461.994529] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [461.994598] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [461.994675] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [461.994748] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [461.994831] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [461.994921] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [461.995010] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [461.995100] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [461.995176] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [461.995268] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [461.995365] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [461.995456] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [461.995526] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [461.995596] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [461.995665] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [461.995740] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [461.995818] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [461.995902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [461.996408] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [461.996522] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [461.996590] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [461.996652] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [461.996713] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [461.996774] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [461.996860] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [461.996934] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [461.997004] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [461.997074] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [461.997143] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [461.997202] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [461.997257] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [461.997311] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [462.007361] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <6> [462.008735] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [462.013638] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [462.013744] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [462.013839] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [462.013969] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [462.014116] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [462.014237] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [462.014331] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [462.014421] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [462.014515] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [462.014601] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [462.014686] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [462.014770] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [462.014874] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [462.014978] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [462.015087] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [462.015191] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [462.015273] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [462.015353] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [462.015430] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [462.015507] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [462.015615] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [462.015721] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [462.016824] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [462.016906] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [462.017016] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [462.026854] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [462.027007] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [462.027106] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [462.268816] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [462.280792] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [462.304774] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [462.340744] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [462.352738] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [462.413741] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [462.761639] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [462.761654] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [462.761657] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [462.761658] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [462.761661] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [462.761663] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [462.761665] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [462.761667] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [462.761668] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [462.761671] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [462.761730] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [462.761731] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [462.761732] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [462.761754] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [462.761863] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [462.773648] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [462.785620] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [462.785726] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [462.785816] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [462.785899] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [462.785984] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [462.786169] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [462.786249] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [462.786324] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [462.786398] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [462.786464] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [462.786561] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [462.786809] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [462.786950] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [462.787074] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [462.787621] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [462.787737] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [462.787832] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [462.788057] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [462.788160] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [462.788248] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [462.788566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [462.788673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [462.788774] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [462.788840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [462.788906] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [462.788971] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [462.789035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [462.789098] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [462.789161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [462.789227] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [462.789294] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [462.789363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [462.789431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [462.789499] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [462.789567] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [462.789645] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [462.789708] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [462.789770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [462.789831] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [462.789892] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [462.789952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [462.790013] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [462.790074] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [462.790132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [462.790188] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [462.790242] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [462.790297] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [462.790355] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [462.790415] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [462.790474] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [462.790533] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [462.790595] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [462.790656] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [462.790726] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [462.790788] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [462.790845] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [462.790902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [462.790967] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [462.791044] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [462.791115] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [462.791188] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [462.791268] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [462.791350] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [462.791425] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [462.791504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [462.791575] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [462.791655] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [462.791719] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [462.791778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [462.791837] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [462.791896] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [462.791955] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [462.792013] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [462.792070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [462.792128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [462.792186] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [462.792245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [462.792304] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [462.792363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [462.792425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [462.792488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [462.792550] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [462.792625] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [462.792681] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [462.792740] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [462.792796] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [462.792853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [462.792912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [462.792975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [462.793041] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [462.793104] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [462.793164] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [462.793217] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [462.793294] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [462.793370] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [462.793462] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [462.793565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [462.793652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [462.793741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [462.793819] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [462.795294] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [462.797569] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [462.797671] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [462.797734] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [462.797783] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [462.797830] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [462.797876] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [462.797922] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [462.797968] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [462.798013] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [462.798058] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [462.798103] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [462.798148] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [462.798192] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [462.798236] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [462.798282] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [462.798358] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [462.809758] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [462.810449] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [462.810530] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [462.810600] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [462.810648] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [462.810696] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [462.810748] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [463.333921] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [463.333926] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [463.333927] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [463.334118] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [463.334214] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [463.334302] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [463.334372] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [463.334516] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [463.334645] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [463.334791] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [463.334867] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [463.334939] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [463.335005] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [463.336033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [463.336122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [463.336198] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [463.336266] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [463.336330] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [463.336394] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [463.336465] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [463.336532] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [463.336608] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [463.336676] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [463.336732] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [463.336787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [463.336842] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [463.336896] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [463.336950] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [463.337004] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [463.337062] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [463.337124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [463.337184] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [463.337244] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [463.337304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [463.337363] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [463.337421] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [463.337501] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [463.337553] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [463.337605] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [463.337665] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [463.337725] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [463.337782] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [463.337840] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [463.337895] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [463.337950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [463.338008] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [463.338066] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [463.338123] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [463.338179] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [463.338235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [463.338294] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [463.338352] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [463.338408] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [463.338619] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [463.338682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [463.338742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [463.338800] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [463.338943] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [463.338997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [463.339049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [463.339100] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [463.339228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [463.339283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [463.339336] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [463.339389] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [463.339446] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [463.339497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [463.339554] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [463.339856] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [463.339945] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [463.339993] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [463.340040] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [463.340086] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [463.340132] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [463.340178] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [463.340223] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [463.340267] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [463.340312] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [463.340355] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [463.340399] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [463.340451] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [463.340495] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [463.340540] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [463.340620] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [463.340695] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [463.341076] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [463.342973] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [463.361225] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [463.372262] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [463.372623] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [463.373611] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [463.373705] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [463.373766] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [463.373821] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [463.373879] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [463.373936] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [463.373991] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [463.374046] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [463.374105] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [463.376067] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [463.376154] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [463.376215] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [463.377370] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [463.377476] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [463.380193] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [463.383691] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [463.383774] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [463.383826] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [463.383875] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [463.383922] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [463.383969] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [463.384015] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [463.384060] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [463.384106] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [463.384151] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [463.384196] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [463.384240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [463.384285] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [463.384329] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [463.384753] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [463.385993] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [463.386918] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [463.387005] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [463.387092] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [463.408737] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [463.409292] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [463.409538] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [463.409702] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [463.409852] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [463.410028] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [463.410197] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [463.410350] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [463.410354] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [463.410358] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [463.410361] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [463.410365] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [463.410369] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [463.410372] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [463.410376] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [463.410380] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [463.410384] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [463.410749] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [463.410950] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [463.411159] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [463.411349] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [463.411579] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [463.411766] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [463.411988] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [463.412181] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [463.412387] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [463.412616] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [463.413067] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [463.413215] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [463.413381] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [463.413575] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [463.413738] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [463.413917] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [463.414065] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [463.414215] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [463.414357] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [463.414518] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [463.414754] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [463.416188] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [463.416302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [463.416423] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [463.416538] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [463.416645] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [463.416755] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [463.416864] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [463.416978] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [463.417079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [463.417187] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [463.417295] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [463.417396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [463.417520] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [463.417616] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [463.417710] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [463.417803] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [463.417894] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [463.417993] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [463.418096] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [463.418198] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [463.418284] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [463.418370] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [463.418470] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [463.418553] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [463.418633] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [463.418712] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [463.418792] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [463.418880] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [463.418969] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [463.419067] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [463.419153] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [463.419238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [463.419317] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [463.419396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [463.419496] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [463.419575] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [463.419653] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [463.419729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [463.419804] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [463.419879] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [463.420539] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [463.420615] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [463.420686] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [463.420757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [463.420827] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [463.420894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [463.420959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [463.421024] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [463.421087] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [463.421150] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [463.421213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [463.421276] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [463.421801] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [463.421867] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [463.421932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [463.422682] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [463.422796] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [463.422853] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [463.422908] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [463.422962] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [463.423014] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [463.423066] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [463.423117] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [463.423168] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [463.423219] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [463.423268] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [463.423317] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [463.423366] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [463.423420] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [463.423468] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [463.423546] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [463.423628] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [463.426005] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [463.446161] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [463.467434] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [463.467934] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [463.469458] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [463.469614] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [463.473231] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [463.473467] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [463.476843] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [463.477045] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [463.522514] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [463.523344] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [463.523628] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [463.523848] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [463.524058] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [463.524449] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [463.524622] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [463.524803] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [463.525344] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [463.525661] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [463.525928] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [463.526235] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [463.526510] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [463.526819] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [463.527079] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [463.527388] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [463.527647] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [463.527883] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [463.528113] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [463.528339] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [463.528605] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [463.528866] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [463.529085] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [463.529653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [463.529922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [463.530185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [463.530470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [463.530744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [463.531114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [463.531408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [463.531676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [463.532094] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [463.532434] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [463.532731] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [463.533058] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [463.548604] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [463.551023] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [463.551303] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [463.552221] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [463.553532] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [463.553602] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [463.554226] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [463.555220] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [463.555273] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [463.555900] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [463.556857] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [463.556920] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [463.557569] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [463.558509] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [463.558554] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [463.558562] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [463.573285] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [463.578409] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18 <7> [463.579240] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [463.579472] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [463.580266] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [463.582176] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [463.583309] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [463.583422] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [463.583500] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [463.583574] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [463.583841] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [463.583936] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [463.584121] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [463.584228] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [463.584359] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [463.584468] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [463.584565] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [463.584686] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [463.584780] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [463.585311] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [463.585325] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [463.585338] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [463.585846] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [463.586177] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [463.586285] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [463.586404] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [463.586532] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [463.586538] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [463.586540] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.586541] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [463.586544] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [463.586546] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.586548] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [463.586551] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.586552] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [463.586555] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.586570] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [463.586671] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [463.586770] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [463.587235] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [463.587249] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [463.587326] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [463.587328] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [463.587330] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.587391] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [463.587395] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [463.587399] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [463.587403] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [463.587407] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [463.587536] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [463.587540] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [463.587543] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [463.587663] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [463.587667] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [463.587670] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [463.587788] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [463.587792] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [463.587795] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [463.587798] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [463.587801] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [463.587822] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [463.587837] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [463.587841] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [463.587854] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [463.587922] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [463.587929] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [463.594511] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [463.595727] fbcon: xedrmfb (fb0) is primary device <7> [463.596445] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [463.596574] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [463.596679] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [463.596779] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [463.596869] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [463.596959] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [463.597040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [463.597116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [463.597192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [463.597273] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [463.597355] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [463.597470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [463.597566] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [463.597661] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [463.597756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [463.597854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [463.597968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [463.598082] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [463.598198] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [463.598314] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [463.598500] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [463.598632] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [463.598752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [463.598881] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [463.599010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [463.599138] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [463.599271] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [463.599421] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [463.599551] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [463.599681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [463.599826] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [463.599937] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [463.600020] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [463.600100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [463.600181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [463.600262] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [463.600342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [463.600453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [463.600542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [463.600630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [463.600715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [463.600798] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [463.600878] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [463.600951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [463.601024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [463.601098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [463.601170] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [463.601241] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [463.601313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [463.601406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [463.601493] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [463.601579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [463.601665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [463.601751] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [463.601855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [463.602007] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [463.602160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [463.602313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [463.602488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [463.602640] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [463.602791] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [463.602943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [463.603100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [463.603276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [463.603473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [463.603630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [463.603786] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [463.603940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [463.604094] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [463.604249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [463.604524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [463.604708] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [463.604871] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [463.605100] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [463.605229] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [463.605373] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [463.605504] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [463.605630] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [463.605753] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [463.605876] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [463.606021] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [463.606210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [463.606408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [463.606588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [463.606766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [463.606940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [463.607140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [463.607314] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [463.607547] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [463.607722] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [463.607894] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [463.608063] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [463.608293] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [463.608478] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [463.608673] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [463.608870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [463.609045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [463.609212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [463.609386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [463.609548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [463.609706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [463.609864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [463.610037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [463.610193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [463.610348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [463.610545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [463.610700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [463.610855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [463.611008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [463.611161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [463.611312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [463.611513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [463.611675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [463.611818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [463.611970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [463.612112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [463.612254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [463.612403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [463.612546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [463.612687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [463.612830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [463.612973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [463.613137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [463.613291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [463.613462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [463.613613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [463.613761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [463.613911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [463.614059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [463.614206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [463.614365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [463.614510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [463.614653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [463.614795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [463.614936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [463.615098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [463.615267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [463.615441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [463.615586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [463.615757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [463.615927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [463.616075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [463.616224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [463.616408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [463.616573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [463.616729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [463.616875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [463.617019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [463.617166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [463.617312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [463.617496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [463.617648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [463.617812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [463.617967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [463.618034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [463.618099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [463.618163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [463.618228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [463.618292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [463.618363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [463.618709] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [463.619427] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [463.619547] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [463.619646] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [463.619737] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [463.619811] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [463.619883] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [463.619954] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [463.620025] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [463.620107] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [463.620188] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [463.620268] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [463.620348] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [463.620444] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [463.620523] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [463.620600] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [463.620671] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [463.620751] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [463.620896] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [463.620957] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [463.621046] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [463.621125] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [463.622038] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [463.622123] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [463.622224] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [463.632433] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [463.632562] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [463.632671] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <6> [463.634157] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [463.634660] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [463.657209] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [463.841028] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [463.843449] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [463.845081] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [463.846690] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [463.848746] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [463.850635] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [463.852485] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [463.853421] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [463.857171] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [463.858031] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [463.859810] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [463.860980] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [463.861607] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [463.862315] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [463.877801] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [463.879948] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [463.881049] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [463.882633] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [463.886255] Console: switching to colour frame buffer device 180x56 <6> [463.933649] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [463.933670] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [463.934212] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [463.934799] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [463.935284] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [463.935727] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [463.936195] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [463.936685] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [463.937166] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [463.937633] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [463.938004] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [463.938425] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [463.938822] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [463.939178] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [463.939640] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [463.939958] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [463.940283] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [463.940597] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [463.940946] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [463.941361] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [463.941706] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [463.942052] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [463.942415] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [463.944238] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [463.944791] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [463.944841] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [463.945295] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [463.945651] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [463.946185] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [463.946025] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [463.946513] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [463.946331] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [463.946924] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [463.947336] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [463.947717] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [463.948088] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [463.951759] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [463.953593] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [463.954303] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [463.955180] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [463.955528] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [463.957677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [463.957724] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [463.957742] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.957753] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [463.957777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [463.957797] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.957811] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [463.957888] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.957899] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [463.957920] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.958181] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [463.958131] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [463.958727] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [463.959080] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [463.959210] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [463.959798] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [463.959825] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [463.961139] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [463.962352] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [463.963424] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <5> [463.968112] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [463.968135] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [463.968149] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [463.968761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [463.968857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [463.968896] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [463.968927] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [463.968954] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [463.969835] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [463.969864] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [463.969881] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [463.970331] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [463.970348] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [463.970361] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [463.970759] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [463.970775] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [463.970791] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [463.970802] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [463.970813] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [463.973971] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [463.974129] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [463.974157] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [463.974473] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [464.031285] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [464.061032] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [464.061059] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [464.061219] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [464.061287] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [464.062139] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [464.062813] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [464.063288] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [464.063704] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [464.064176] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [464.064198] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [464.064209] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [464.064216] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [464.064247] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [464.064261] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [464.064270] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [464.064281] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [464.064288] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [464.064298] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [464.064348] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [464.064732] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [464.065109] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [464.066446] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [464.066457] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [464.066465] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [464.066664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [464.066677] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [464.066690] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [464.066703] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [464.066715] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [464.067123] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [464.067138] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [464.067149] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [464.067580] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [464.067594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [464.067608] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [464.068073] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [464.068087] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [464.068100] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [464.068111] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [464.068122] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [464.068189] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [464.068261] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [464.068277] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [464.068336] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [464.077953] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [464.078500] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [464.081528] Console: switching to colour dummy device 80x25 <7> [464.084850] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [464.085167] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [464.085845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [464.086145] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [464.086572] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [464.086785] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [464.087290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [464.087980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [464.088679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [464.089348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [464.089999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [464.091131] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [464.093609] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [464.111031] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [464.113016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [464.113319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [464.113517] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [464.113708] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [464.113944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [464.114332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [464.114684] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [464.115041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [464.115448] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [464.115838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [464.116201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [464.116628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [464.117000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [464.117451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [464.117815] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [464.118259] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [464.118626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [464.119028] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [464.119439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [464.119792] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [464.120349] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [464.120696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [464.121000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [464.121269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [464.121508] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [464.121744] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [464.121966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [464.122162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [464.122408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [464.122614] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [464.122863] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [464.123145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [464.123467] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [464.123715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [464.123957] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [464.124154] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [464.124398] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [464.124643] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [464.124855] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [464.125053] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [464.125558] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [464.125719] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [464.125965] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [464.126220] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [464.126470] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [464.126710] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [464.126970] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [464.127223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [464.127433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [464.127607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [464.127779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [464.127951] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [464.128137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [464.128400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [464.128811] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [464.128984] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [464.336476] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [464.336945] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [464.347735] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [464.348212] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [464.348664] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [464.399833] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [464.400190] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [464.400618] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [464.401321] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [464.401343] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [464.401677] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [464.402008] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [464.402255] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [464.402456] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [464.402391] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [464.402652] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [464.402844] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [464.403042] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [464.403318] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [464.403517] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [464.403714] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [464.403915] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [464.404115] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [464.404363] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [464.404566] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [464.404780] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [464.405084] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [464.405353] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [464.405568] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [464.405999] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [464.406443] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [464.406768] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [464.407026] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [464.407384] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [464.434772] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [464.439762] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [464.441089] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [464.441709] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [464.442263] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [464.442839] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [464.449522] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [464.459812] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [464.498057] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [464.500238] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [464.574774] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [464.577050] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [464.650275] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (250 ms remaining) <7> [464.904078] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [464.984101] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [464.985004] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [464.991183] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [464.995744] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [465.021582] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <7> [465.029014] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker. <6> [465.084416] xe 0000:00:02.0: Found custom settings in configfs <6> [465.084489] xe 0000:00:02.0: vgaarb: deactivate vga console <7> [465.085914] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [465.086488] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [465.086503] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [465.086608] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [465.086694] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [465.088018] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [465.088188] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [465.088296] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [465.088409] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [465.088516] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [465.088596] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [465.088673] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [465.088749] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [465.088824] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [465.088916] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [465.089014] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [465.089123] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [465.089221] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [465.089318] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [465.089419] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [465.089540] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [465.089658] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [465.089775] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [465.089886] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [465.090048] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [465.090166] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [465.090278] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [465.090391] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [465.090503] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [465.090616] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [465.090728] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [465.090840] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [465.090959] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [465.091077] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [465.091189] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [465.091298] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [465.091407] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [465.091516] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [465.091624] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [465.091734] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [465.091845] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [465.091962] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [465.092079] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [465.092192] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [465.092307] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [465.092421] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [465.092534] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [465.092652] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [465.093179] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [465.093315] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [465.093417] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [465.093511] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [465.093599] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [465.093682] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [465.093764] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [465.093848] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [465.093935] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [465.094038] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [465.094143] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [465.094241] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [465.094319] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [465.094400] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [465.094484] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [465.094556] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [465.094627] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [465.094696] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [465.094771] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [465.094842] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [465.094915] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [465.095059] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [465.095160] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [465.095258] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [465.095336] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [465.095407] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [465.095481] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [465.095570] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [465.095668] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [465.095927] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [465.096026] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [465.096174] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [465.096313] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [465.096453] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [465.096545] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [465.096622] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [465.096698] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [465.096797] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [465.096902] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [465.097032] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [465.097159] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [465.097285] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [465.097394] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [465.097805] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [465.098373] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [465.098462] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [465.098542] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [465.098619] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [465.098695] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [465.098770] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [465.098851] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [465.098929] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [465.099017] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [465.099108] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [465.099198] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [465.099277] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [465.099354] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [465.099432] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [465.099517] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [465.099594] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [465.099671] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [465.099747] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [465.099824] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [465.099901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [465.100032] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [465.100131] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [465.100236] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [465.100327] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [465.100407] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [465.100486] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [465.100565] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [465.100646] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [465.100729] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [465.100812] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [465.102193] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [465.102358] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [465.102513] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [465.102580] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [465.102643] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [465.102705] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [465.102765] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [465.102824] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [465.102883] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [465.102960] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [465.103036] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [465.103111] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [465.103186] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [465.103253] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <6> [465.112599] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [465.120438] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <7> [465.128639] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [465.128737] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [465.128822] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [465.128936] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [465.129052] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [465.129156] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [465.129248] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [465.129326] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [465.129407] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [465.129486] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [465.129564] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [465.129639] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [465.129712] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [465.129785] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [465.129863] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [465.129956] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [465.130036] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [465.130119] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [465.130203] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [465.130282] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [465.130377] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [465.130467] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [465.131764] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [465.131833] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [465.131931] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [465.141962] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [465.142254] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [465.142477] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [465.380906] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [465.392892] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [465.416869] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [465.452840] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [465.464833] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [465.524831] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [465.873725] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [465.873739] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [465.873741] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [465.873743] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [465.873746] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [465.873749] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [465.873751] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [465.873753] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [465.873754] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [465.873756] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [465.873813] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [465.873815] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [465.873816] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [465.873833] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [465.873925] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [465.885702] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [465.897708] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [465.897805] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [465.897891] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [465.897976] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [465.898064] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [465.898256] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [465.898331] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [465.898403] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [465.898474] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [465.898539] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [465.898633] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [465.898873] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [465.899013] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [465.899140] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [465.899587] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [465.899700] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [465.899797] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [465.900045] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [465.900146] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [465.900237] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [465.900556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [465.900643] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [465.900739] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [465.900812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [465.900880] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [465.900945] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [465.901010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [465.901073] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [465.901137] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [465.901200] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [465.901262] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [465.901324] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [465.901388] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [465.901453] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [465.901516] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [465.901580] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [465.901642] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [465.901713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [465.901776] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [465.901842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [465.901903] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [465.901962] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [465.902023] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [465.902080] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [465.902137] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [465.902193] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [465.902249] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [465.902307] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [465.902365] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [465.902426] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [465.902486] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [465.902546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [465.902608] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [465.902663] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [465.902733] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [465.902792] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [465.902853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [465.902914] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [465.902985] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [465.903054] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [465.903127] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [465.903200] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [465.903273] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [465.903342] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [465.903417] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [465.903481] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [465.903545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [465.903607] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [465.903665] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [465.903739] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [465.903800] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [465.903860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [465.903916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [465.903971] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [465.904030] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [465.904088] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [465.904142] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [465.904196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [465.904253] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [465.904310] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [465.904366] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [465.904423] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [465.904478] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [465.904533] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [465.904588] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [465.904642] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [465.904704] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [465.904758] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [465.904817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [465.904878] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [465.904931] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [465.904983] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [465.905037] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [465.905114] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [465.905190] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [465.905282] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [465.905385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [465.905461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [465.905534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [465.905607] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [465.907059] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [465.909342] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [465.909417] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [465.909473] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [465.909524] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [465.909572] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [465.909618] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [465.909664] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [465.909732] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [465.909781] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [465.909831] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [465.909878] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [465.909922] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [465.909967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [465.910012] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [465.910057] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [465.910132] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [465.920790] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [465.921536] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [465.921612] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [465.921680] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [465.921735] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [465.921789] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [465.921838] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [466.443429] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [466.443436] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [466.443437] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [466.443630] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [466.443739] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [466.443835] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [466.443909] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [466.444034] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [466.444140] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [466.444265] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [466.444334] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [466.444407] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [466.444476] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [466.445426] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [466.445487] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [466.445565] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [466.445639] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [466.445701] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [466.445768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [466.445831] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [466.445896] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [466.445956] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [466.446016] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [466.446075] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [466.446131] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [466.446185] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [466.446239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [466.446292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [466.446344] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [466.446396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [466.446447] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [466.446499] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [466.446565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [466.446622] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [466.446689] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [466.446752] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [466.446809] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [466.446865] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [466.446920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [466.446981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [466.447043] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [466.447102] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [466.447159] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [466.447214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [466.447268] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [466.447324] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [466.447380] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [466.447435] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [466.447490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [466.447555] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [466.447624] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [466.447700] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [466.447774] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [466.447971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [466.448049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [466.448117] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [466.448178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [466.448321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [466.448381] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [466.448440] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [466.448496] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [466.448646] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [466.448720] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [466.448785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [466.448843] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [466.448902] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [466.448959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [466.449015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [466.449304] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [466.449396] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [466.449445] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [466.449494] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [466.449557] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [466.449606] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [466.449657] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [466.449718] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [466.449776] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [466.449824] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [466.449872] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [466.449919] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [466.449967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [466.450015] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [466.450062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [466.450128] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [466.450199] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [466.450608] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [466.452970] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [466.470241] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [466.481297] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [466.481603] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [466.482634] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [466.482723] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [466.482785] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [466.482842] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [466.482901] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [466.482959] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [466.483014] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [466.483072] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [466.483133] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [466.485193] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [466.485280] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [466.485344] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [466.487150] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [466.487235] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [466.489916] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [466.494309] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [466.494448] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [466.494602] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [466.494695] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [466.494786] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [466.494875] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [466.494963] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [466.495052] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [466.495141] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [466.495241] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [466.495347] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [466.495446] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [466.495563] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [466.495650] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [466.496360] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [466.498533] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [466.499926] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [466.500086] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [466.500332] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [466.521824] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [466.522341] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [466.522603] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [466.522776] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [466.522937] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [466.523096] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [466.523255] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [466.523452] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [466.523458] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [466.523464] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [466.523470] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [466.523477] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [466.523482] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [466.523498] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [466.523502] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [466.523506] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [466.523511] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [466.523897] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [466.524126] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [466.524378] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [466.524699] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [466.524953] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [466.525176] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [466.525400] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [466.525658] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [466.525914] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [466.526132] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [466.526670] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [466.526881] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [466.527110] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [466.527333] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [466.527567] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [466.527783] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [466.527999] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [466.528215] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [466.528424] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [466.528673] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [466.528992] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [466.531058] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [466.531225] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [466.531390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [466.531564] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [466.531714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [466.531877] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [466.532020] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [466.532174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [466.532318] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [466.532458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [466.532634] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [466.532775] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [466.532915] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [466.533045] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [466.533172] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [466.533292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [466.533428] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [466.533587] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [466.533705] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [466.533821] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [466.533938] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [466.534056] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [466.534165] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [466.534289] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [466.534414] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [466.534534] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [466.534634] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [466.534749] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [466.534858] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [466.534968] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [466.535078] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [466.535184] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [466.535285] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [466.535384] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [466.535497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [466.535596] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [466.535695] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [466.535793] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [466.535889] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [466.535980] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [466.536658] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [466.536756] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [466.536843] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [466.536928] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [466.537011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [466.537089] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [466.537167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [466.537243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [466.537319] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [466.537396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [466.537473] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [466.537573] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [466.538098] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [466.538173] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [466.538245] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [466.539111] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [466.539248] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [466.539311] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [466.539369] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [466.539424] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [466.539478] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [466.539559] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [466.539611] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [466.539663] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [466.539714] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [466.539765] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [466.539815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [466.539865] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [466.539912] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [466.539959] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [466.540042] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [466.540134] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [466.542287] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [466.561556] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [466.583002] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [466.583522] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [466.585412] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [466.585655] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [466.589589] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [466.589785] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [466.593582] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [466.593805] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [466.639606] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [466.640372] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [466.640673] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [466.640887] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [466.641088] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [466.641445] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [466.641697] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [466.641866] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [466.642437] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [466.642785] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [466.643020] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [466.643285] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [466.643515] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [466.643730] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [466.643947] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [466.644166] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [466.644436] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [466.644701] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [466.644924] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [466.645128] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [466.645327] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [466.645543] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [466.645748] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [466.646233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [466.646502] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [466.646747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [466.646977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [466.647199] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [466.647501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [466.647752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [466.647995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [466.648352] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [466.648767] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [466.649389] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [466.649882] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [466.669076] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [466.672693] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [466.673109] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [466.674080] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [466.676515] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [466.676703] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [466.677872] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [466.679386] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [466.679512] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [466.680139] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [466.681242] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [466.681309] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [466.682024] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [466.683277] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [466.683369] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [466.683384] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [466.698279] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [466.701115] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19 <7> [466.702075] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [466.702202] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [466.702576] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [466.704118] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [466.704405] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [466.705218] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [466.705323] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [466.705420] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [466.705536] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [466.705778] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [466.705897] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [466.705989] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [466.706095] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [466.706188] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [466.706278] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [466.706396] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [466.707282] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [466.707517] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [466.707535] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [466.707544] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [466.708063] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [466.708366] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [466.708496] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [466.708589] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [466.708704] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [466.708709] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [466.708711] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [466.708713] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [466.708715] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [466.708718] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [466.708720] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [466.708722] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [466.708724] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [466.708726] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [466.708744] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [466.708849] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [466.708957] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [466.709448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [466.709464] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [466.709558] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [466.709561] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [466.709564] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [466.709619] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [466.709624] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [466.709628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [466.709633] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [466.709638] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [466.709783] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [466.709788] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [466.709792] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [466.709931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [466.709936] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [466.709939] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [466.710076] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [466.710080] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [466.710083] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [466.710087] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [466.710089] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [466.710111] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [466.710128] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [466.710132] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [466.710147] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [466.710224] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [466.710231] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [466.717301] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [466.717834] fbcon: xedrmfb (fb0) is primary device <7> [466.718481] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [466.718614] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [466.718724] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [466.718844] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [466.718952] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [466.719047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [466.719134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [466.719218] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [466.719300] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [466.719383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [466.719485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [466.719581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [466.719676] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [466.719770] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [466.719865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [466.719966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [466.720065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [466.720162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [466.720261] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [466.720359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [466.720470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [466.720570] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [466.720671] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [466.720773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [466.720889] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [466.721000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [466.721104] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [466.721206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [466.721306] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [466.721407] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [466.721526] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [466.721622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [466.721716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [466.721808] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [466.721901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [466.721992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [466.722083] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [466.722174] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [466.722266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [466.722359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [466.722464] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [466.722556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [466.722647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [466.722738] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [466.722828] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [466.722913] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [466.722986] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [466.723058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [466.723132] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [466.723204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [466.723276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [466.723347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [466.723418] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [466.723519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [466.723608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [466.723695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [466.723781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [466.723866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [466.723948] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [466.724023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [466.724098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [466.724174] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [466.724251] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [466.724328] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [466.724405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [466.724509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [466.724599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [466.724687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [466.724775] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [466.724858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [466.724941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [466.725024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [466.725108] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [466.725239] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [466.725316] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [466.725395] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [466.725485] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [466.725561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [466.725636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [466.725713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [466.725789] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [466.725887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [466.725988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [466.726086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [466.726182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [466.726263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [466.726345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [466.726431] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [466.726546] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [466.726644] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [466.726741] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [466.726835] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [466.726945] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [466.727026] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [466.727110] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [466.727194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [466.727276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [466.727356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [466.727443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [466.727540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [466.727637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [466.727734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [466.727829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [466.727923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [466.728014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [466.728104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [466.728194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [466.728275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [466.728354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [466.728439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [466.728530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [466.728619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [466.728708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [466.728797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [466.728876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [466.728949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [466.729022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [466.729096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [466.729171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [466.729259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [466.729350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [466.729514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [466.729604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [466.729691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [466.729778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [466.729866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [466.729953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [466.730040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [466.730127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [466.730213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [466.730302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [466.730388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [466.730490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [466.730577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [466.730663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [466.730749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [466.730835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [466.730931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [466.731022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [466.731111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [466.731200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [466.731290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [466.731389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [466.731507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [466.731598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [466.731686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [466.731763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [466.731836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [466.731908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [466.731980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [466.732052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [466.732124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [466.732196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [466.732270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [466.732343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [466.732415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [466.732519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [466.732605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [466.732690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [466.732775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [466.733024] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [466.733147] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [466.733254] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [466.733347] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [466.733458] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [466.733545] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [466.733631] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [466.733714] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [466.733795] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [466.733877] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [466.733957] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [466.734036] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [466.734113] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [466.734190] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [466.734263] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [466.734327] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [466.734390] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [466.734485] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [466.734644] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [466.734721] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [466.734825] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [466.734905] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [466.735810] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [466.735883] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [466.735969] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [466.745453] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <6> [466.745555] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [466.745551] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [466.745655] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [466.745835] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [466.768537] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [466.957783] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [466.960012] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [466.961229] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [466.962236] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [466.964652] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [466.965943] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [466.967164] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [466.967605] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [466.969235] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [466.969840] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [466.970837] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [466.971429] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [466.971864] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [466.972366] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [466.988324] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [466.990136] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [466.990600] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [466.991953] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [466.994163] Console: switching to colour frame buffer device 180x56 <6> [467.043347] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [467.043370] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [467.043853] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [467.044348] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [467.044783] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [467.045202] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [467.045719] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [467.046143] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [467.046618] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [467.046991] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [467.047386] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [467.047738] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [467.048091] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [467.048502] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [467.048868] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [467.049189] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [467.049536] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [467.049866] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [467.050154] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [467.050473] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [467.050791] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [467.051058] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [467.051310] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [467.053137] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [467.053311] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [467.053564] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [467.053780] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [467.053984] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [467.054176] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [467.054368] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [467.054550] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [467.054723] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [467.058310] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [467.059416] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [467.059547] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [467.059673] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [467.059793] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [467.059911] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [467.060027] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [467.060143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [467.088612] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [467.088666] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [467.090178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [467.090233] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [467.092147] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [467.093086] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [467.093713] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [467.094237] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [467.095221] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [467.095245] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [467.095255] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.095261] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [467.095274] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [467.095283] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.095291] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [467.095334] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.095342] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [467.095353] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.095439] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [467.095815] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [467.096193] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [467.097504] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [467.097514] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [467.097519] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.097679] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [467.097706] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [467.097718] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [467.097730] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [467.097742] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [467.098434] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [467.098461] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [467.098479] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [467.098966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [467.098975] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [467.098985] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [467.099300] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [467.099319] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [467.099327] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [467.099333] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [467.099338] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [467.099631] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [467.099674] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [467.099682] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [467.099759] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [467.106086] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [467.121493] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [467.121515] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [467.121643] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [467.121661] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [467.122542] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [467.123228] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [467.123691] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [467.124120] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [467.124729] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [467.124748] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [467.124756] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.124761] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [467.124773] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [467.124782] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.124789] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [467.124799] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.124805] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [467.124815] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.124863] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [467.125261] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [467.125657] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [467.126514] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [467.126521] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [467.126527] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [467.126676] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [467.126688] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [467.126702] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [467.126714] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [467.126724] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [467.127106] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [467.127120] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [467.127129] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [467.127603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [467.127615] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [467.127623] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [467.127964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [467.127972] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [467.127979] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [467.127985] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [467.127991] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [467.128032] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [467.128058] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [467.128064] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [467.128100] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [467.155360] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [467.178032] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <6> [467.211249] Console: switching to colour dummy device 80x25 <7> [467.221692] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [467.221839] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [467.222211] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [467.222618] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [467.222931] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [467.223325] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [467.223713] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [467.224190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [467.225042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [467.225553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [467.226032] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [467.226472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [467.227668] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [467.238340] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [467.243547] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [467.244047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [467.244607] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [467.245107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [467.245603] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [467.246039] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [467.246512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [467.246930] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [467.247335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [467.247757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [467.248133] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [467.248593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [467.248973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [467.249342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [467.249690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [467.250037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [467.250413] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [467.250813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [467.251153] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [467.251604] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [467.251999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [467.252498] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [467.252864] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [467.253193] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [467.253647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [467.254010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [467.254527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [467.254870] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [467.255196] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [467.255633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [467.255928] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [467.256220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [467.256569] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [467.256845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [467.257109] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [467.257409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [467.257732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [467.257997] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [467.258300] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [467.258571] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [467.259015] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [467.259283] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [467.259610] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [467.259886] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [467.260204] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [467.260550] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [467.260875] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [467.261212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [467.261569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [467.261874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [467.262137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [467.262432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [467.262662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [467.262884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [467.263418] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [467.263623] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [467.471326] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [467.471734] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [467.492126] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [467.492502] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [467.492795] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [467.544967] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [467.546023] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [467.553254] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [467.554281] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [467.554355] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [467.555741] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [467.556287] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [467.556823] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [467.557201] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [467.557524] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [467.557845] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [467.558205] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [467.558578] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [467.558885] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [467.559191] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [467.559476] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [467.559819] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [467.560145] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [467.560522] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [467.560807] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [467.561078] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [467.561490] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [467.561822] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [467.562093] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [467.562641] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [467.563074] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [467.563533] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [467.563831] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [467.564229] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [467.585351] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [467.585880] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [467.586348] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [467.586840] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [467.597988] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [467.604430] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [467.612376] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [467.622528] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [467.660567] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [467.661521] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [467.736950] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [467.742951] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [467.806859] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (247 ms remaining) <7> [468.063298] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [468.113335] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [468.114102] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [468.119870] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [468.124869] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [468.141880] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <7> [468.148586] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker. <6> [468.207866] xe 0000:00:02.0: Found custom settings in configfs <6> [468.207906] xe 0000:00:02.0: vgaarb: deactivate vga console <7> [468.208792] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [468.209209] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [468.209220] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [468.209309] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [468.209391] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [468.210404] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [468.210527] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [468.210618] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [468.210710] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [468.210794] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [468.210856] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [468.210915] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [468.211000] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [468.211075] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [468.211170] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [468.211259] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [468.211368] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [468.211456] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [468.211551] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [468.211638] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [468.211729] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [468.211812] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [468.211892] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [468.211977] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [468.212073] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [468.212170] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [468.212264] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [468.212341] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [468.212414] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [468.212485] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [468.212557] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [468.212628] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [468.212699] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [468.212770] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [468.212840] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [468.212911] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [468.212989] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [468.213083] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [468.213176] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [468.213271] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [468.213345] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [468.213422] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [468.213498] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [468.213575] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [468.213651] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [468.213722] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [468.213792] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [468.213867] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [468.214228] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [468.214347] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [468.214449] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [468.214539] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [468.214620] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [468.214692] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [468.214767] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [468.214838] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [468.214907] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [468.214994] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [468.215089] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [468.215182] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [468.215272] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [468.215346] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [468.215419] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [468.215487] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [468.215554] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [468.215622] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [468.215696] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [468.215769] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [468.215846] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [468.215923] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [468.216273] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [468.216377] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [468.216450] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [468.216517] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [468.216592] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [468.216777] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [468.216876] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [468.217142] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [468.217255] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [468.217378] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [468.217494] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [468.217633] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [468.217722] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [468.217795] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [468.217869] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [468.217979] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [468.218106] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [468.218232] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [468.218355] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [468.218471] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [468.218584] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [468.219018] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [468.219718] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [468.219817] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [468.219892] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [468.219973] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [468.220068] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [468.220161] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [468.220262] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [468.220334] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [468.220403] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [468.220472] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [468.220541] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [468.220609] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [468.220677] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [468.220744] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [468.220818] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [468.220884] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [468.220951] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [468.221054] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [468.221142] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [468.221229] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [468.221304] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [468.221373] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [468.221448] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [468.221517] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [468.221586] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [468.221655] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [468.221722] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [468.221793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [468.221866] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [468.221938] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [468.222487] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [468.222601] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [468.222663] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [468.222721] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [468.222777] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [468.222832] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [468.222885] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [468.222937] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [468.223011] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [468.223079] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [468.223146] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [468.223213] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [468.223275] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [468.223330] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [468.231842] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <6> [468.235111] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [468.236722] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [468.236827] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [468.236919] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [468.237050] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [468.237183] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [468.237304] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [468.237413] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [468.237518] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [468.237627] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [468.237725] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [468.237828] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [468.237930] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [468.238042] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [468.238141] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [468.238242] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [468.238351] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [468.238427] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [468.238493] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [468.238556] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [468.238619] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [468.238711] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [468.238800] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [468.239964] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [468.240051] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [468.240159] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [468.250539] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [468.250662] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [468.250735] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [468.491954] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [468.503946] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [468.527912] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [468.563880] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [468.575871] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [468.635874] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [468.983757] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [468.983770] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [468.983773] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [468.983774] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [468.983777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [468.983779] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [468.983780] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [468.983783] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [468.983784] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [468.983786] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [468.983843] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [468.983844] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [468.983845] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [468.983867] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [468.983953] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [468.995734] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [469.007734] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [469.007839] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [469.007932] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [469.008023] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [469.008109] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [469.008295] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [469.008371] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [469.008444] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [469.008515] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [469.008586] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [469.008679] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [469.008933] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [469.009076] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [469.009194] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [469.009700] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [469.009828] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [469.009926] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [469.010143] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [469.010244] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [469.010331] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [469.010656] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [469.010753] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [469.010849] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [469.010936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [469.011005] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [469.011070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [469.011134] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [469.011196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [469.011259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [469.011321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [469.011383] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [469.011445] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [469.011506] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [469.011566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [469.011627] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [469.011687] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [469.011757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [469.011828] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [469.011909] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [469.011974] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [469.012037] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [469.012099] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [469.012162] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [469.012219] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [469.012276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [469.012332] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [469.012388] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [469.012446] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [469.012502] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [469.012557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [469.012611] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [469.012667] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [469.012733] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [469.012790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [469.012866] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [469.012938] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [469.013002] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [469.013065] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [469.013136] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [469.013212] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [469.013291] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [469.013370] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [469.013448] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [469.013522] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [469.013600] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [469.013661] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [469.013728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [469.013790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [469.013853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [469.013924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [469.013984] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [469.014042] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [469.014100] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [469.014156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [469.014212] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [469.014268] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [469.014322] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [469.014377] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [469.014431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [469.014485] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [469.014538] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [469.014592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [469.014646] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [469.014700] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [469.014772] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [469.014836] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [469.014905] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [469.014966] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [469.015021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [469.015078] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [469.015130] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [469.015182] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [469.015232] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [469.015310] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [469.015392] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [469.015491] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [469.015603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [469.015685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [469.015773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [469.015851] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [469.017361] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [469.019625] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [469.019716] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [469.019766] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [469.019823] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [469.019877] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [469.019924] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [469.019971] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [469.020016] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [469.020062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [469.020107] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [469.020152] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [469.020197] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [469.020242] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [469.020285] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [469.020330] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [469.020406] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [469.031839] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [469.032528] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [469.032608] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [469.032662] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [469.032726] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [469.032773] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [469.032830] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [469.529018] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [469.529024] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [469.529026] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [469.529174] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [469.529267] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [469.529346] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [469.529411] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [469.529514] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [469.529639] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [469.529758] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [469.529840] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [469.529927] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [469.529995] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [469.530945] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [469.531012] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [469.531079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [469.531142] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [469.531203] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [469.531265] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [469.531326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [469.531390] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [469.531450] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [469.531508] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [469.531584] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [469.531646] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [469.531702] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [469.531760] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [469.531813] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [469.531866] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [469.531917] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [469.531969] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [469.532021] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [469.532072] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [469.532125] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [469.532177] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [469.532229] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [469.532281] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [469.532333] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [469.532384] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [469.532441] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [469.532500] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [469.532562] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [469.532620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [469.532676] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [469.532739] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [469.532800] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [469.532857] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [469.532913] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [469.532971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [469.533028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [469.533088] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [469.533147] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [469.533205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [469.533390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [469.533453] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [469.533514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [469.533585] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [469.533720] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [469.533781] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [469.533834] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [469.533885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [469.534011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [469.534065] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [469.534120] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [469.534174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [469.534228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [469.534280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [469.534331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [469.534609] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [469.534704] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [469.534763] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [469.534819] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [469.534866] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [469.534913] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [469.534959] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [469.535005] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [469.535050] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [469.535096] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [469.535140] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [469.535185] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [469.535229] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [469.535273] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [469.535317] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [469.535379] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [469.535448] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [469.535850] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [469.538168] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [469.555538] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [469.566687] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [469.567072] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [469.568124] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [469.568235] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [469.568296] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [469.568350] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [469.568406] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [469.568460] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [469.568513] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [469.568607] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [469.568669] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [469.570674] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [469.570759] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [469.570820] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [469.572628] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [469.572702] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [469.574816] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [469.578294] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [469.578395] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [469.578475] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [469.578574] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [469.578650] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [469.578727] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [469.578803] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [469.578878] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [469.578953] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [469.579027] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [469.579100] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [469.579175] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [469.579245] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [469.579315] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [469.579897] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [469.581433] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [469.582423] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [469.582520] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [469.582651] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [469.603642] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [469.604191] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [469.604378] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [469.604561] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [469.604715] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [469.604867] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [469.605043] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [469.605222] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [469.605227] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [469.605231] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [469.605235] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [469.605240] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [469.605245] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [469.605250] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [469.605255] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [469.605260] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [469.605265] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [469.605632] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [469.605848] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [469.606075] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [469.606283] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [469.606495] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [469.606798] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [469.607034] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [469.607230] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [469.607417] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [469.607639] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [469.608162] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [469.608341] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [469.608543] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [469.608732] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [469.608931] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [469.609107] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [469.609284] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [469.609459] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [469.609655] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [469.609851] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [469.610118] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [469.611721] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [469.611859] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [469.611993] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [469.612122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [469.612240] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [469.612361] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [469.612479] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [469.612629] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [469.612743] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [469.612858] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [469.612977] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [469.613086] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [469.613193] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [469.613300] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [469.613403] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [469.613524] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [469.613632] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [469.613730] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [469.613827] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [469.613924] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [469.614019] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [469.614110] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [469.614200] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [469.614290] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [469.614378] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [469.614466] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [469.614570] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [469.614656] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [469.614743] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [469.614841] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [469.614938] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [469.615029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [469.615118] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [469.615205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [469.615298] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [469.615396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [469.615497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [469.615606] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [469.615687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [469.615768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [469.616406] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [469.616486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [469.616581] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [469.616660] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [469.616735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [469.616806] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [469.616879] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [469.616950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [469.617019] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [469.617087] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [469.617155] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [469.617222] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [469.617824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [469.617894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [469.617964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [469.618726] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [469.618834] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [469.618893] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [469.618950] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [469.619008] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [469.619062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [469.619116] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [469.619170] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [469.619222] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [469.619273] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [469.619325] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [469.619376] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [469.619425] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [469.619475] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [469.619537] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [469.619609] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [469.619689] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [469.621754] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [469.641312] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [469.662435] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [469.662904] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [469.664536] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [469.664689] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [469.668269] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [469.668451] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [469.672364] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [469.672534] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [469.717574] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [469.719593] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [469.720229] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [469.720852] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [469.721352] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [469.722129] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [469.722515] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [469.722920] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [469.723966] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [469.724512] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [469.725078] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [469.725694] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [469.726190] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [469.726762] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [469.727243] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [469.727775] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [469.728288] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [469.728809] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [469.729320] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [469.729816] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [469.730263] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [469.730668] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [469.731013] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [469.731831] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [469.732204] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [469.732578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [469.732934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [469.733251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [469.733665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [469.733965] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [469.734243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [469.735083] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [469.735359] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [469.735666] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [469.735927] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [469.743776] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [469.745403] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [469.745579] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [469.746008] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [469.746799] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [469.746849] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [469.747345] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [469.748052] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [469.748109] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [469.749181] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [469.749902] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [469.749940] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [469.750362] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [469.750999] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [469.751026] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [469.751031] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [469.760819] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [469.764710] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20 <7> [469.765666] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [469.765815] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [469.766206] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [469.767555] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [469.767797] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [469.767907] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7> [469.767994] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [469.768101] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [469.768198] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7> [469.768291] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [469.768414] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [469.768489] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [469.768588] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [469.768675] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [469.768728] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7> [469.768757] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [469.768837] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [469.768959] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [469.769006] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [469.769011] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [469.769454] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [469.770088] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [469.770199] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [469.770304] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [469.770410] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [469.770414] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [469.770416] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [469.770417] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [469.770420] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [469.770421] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [469.770423] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [469.770425] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [469.770426] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [469.770428] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [469.770446] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [469.770554] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [469.770655] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [469.771167] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [469.771182] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [469.771262] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [469.771264] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [469.771266] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [469.771321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [469.771326] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [469.771330] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [469.771335] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [469.771341] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [469.771497] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [469.771501] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [469.771505] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [469.771631] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [469.771635] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [469.771639] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [469.771757] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [469.771761] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [469.771765] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [469.771768] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [469.771771] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [469.771791] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [469.771806] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [469.771809] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [469.771824] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [469.771890] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [469.771897] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [469.778840] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [469.779367] fbcon: xedrmfb (fb0) is primary device <7> [469.780167] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [469.780292] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [469.780396] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [469.780502] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [469.780613] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [469.780721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [469.780828] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [469.780933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [469.781037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [469.781139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [469.781241] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [469.781341] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [469.781429] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [469.781553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [469.781651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [469.781748] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [469.781845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [469.781941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [469.782037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [469.782132] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [469.782229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [469.782310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [469.782391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [469.782476] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [469.782571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [469.782664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [469.782758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [469.782846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [469.782923] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [469.783006] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [469.783096] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [469.783186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [469.783276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [469.783365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [469.783454] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [469.783563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [469.783651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [469.783740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [469.783829] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [469.783918] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [469.783998] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [469.784084] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [469.784172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [469.784260] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [469.784348] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [469.784435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [469.784541] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [469.784629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [469.784716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [469.784802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [469.784890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [469.784967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [469.785040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [469.785114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [469.785190] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [469.785265] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [469.785339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [469.785414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [469.785503] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [469.785591] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [469.785680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [469.785768] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [469.785855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [469.785929] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [469.786003] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [469.786076] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [469.786149] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [469.786221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [469.786294] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [469.786367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [469.786440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [469.786534] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [469.786623] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [469.786763] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [469.786847] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [469.786934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [469.787009] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [469.787088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [469.787160] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [469.787232] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [469.787302] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [469.787380] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [469.787481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [469.787594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [469.787693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [469.787791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [469.787880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [469.787960] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [469.788063] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [469.788146] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [469.788226] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [469.788305] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [469.788402] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [469.788490] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [469.788588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [469.788686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [469.788782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [469.788879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [469.788961] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [469.789041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [469.789119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [469.789197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [469.789275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [469.789352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [469.789424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [469.789671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [469.789762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [469.789851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [469.789940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [469.790028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [469.790116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [469.790202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [469.790289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [469.790370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [469.790444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [469.790544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [469.790632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [469.790720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [469.790806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [469.790893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [469.790971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [469.791043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [469.791115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [469.791187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [469.791269] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [469.791367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [469.791468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [469.791557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [469.791641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [469.791728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [469.791818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [469.791907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [469.791996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [469.792079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [469.792152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [469.792226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [469.792300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [469.792373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [469.792446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [469.792547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [469.792634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [469.792721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [469.792807] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [469.792892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [469.792977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [469.793063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [469.793147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [469.793227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [469.793298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [469.793369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [469.793436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [469.793523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [469.793608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [469.793694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [469.793776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [469.793844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [469.793915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [469.793985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [469.794055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [469.794128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [469.794337] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [469.794462] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [469.794573] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [469.794665] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [469.794762] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [469.794849] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [469.794933] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [469.795016] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [469.795098] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [469.795178] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [469.795245] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [469.795312] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [469.795377] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [469.795443] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [469.795533] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [469.795615] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [469.795696] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [469.795794] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [469.795955] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [469.796029] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [469.796124] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [469.796202] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [469.797162] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [469.797247] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [469.797345] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [469.806493] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [469.806626] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [469.806741] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <6> [469.830520] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [469.830845] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [469.853776] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [470.014578] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [470.016192] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [470.017164] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [470.017843] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [470.018882] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [470.019823] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [470.020874] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [470.021163] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [470.022589] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [470.022867] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [470.023642] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [470.024004] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [470.024271] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [470.024612] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [470.040917] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [470.042624] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [470.043045] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [470.044471] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [470.046783] Console: switching to colour frame buffer device 180x56 <6> [470.096728] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [470.096750] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [470.097294] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [470.097890] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [470.098401] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [470.098886] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [470.099391] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [470.099862] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [470.100383] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [470.100839] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [470.101249] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [470.101725] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [470.102109] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [470.102491] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [470.102892] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [470.103205] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [470.103548] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [470.103858] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [470.104137] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [470.104455] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [470.104708] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [470.104954] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [470.105187] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [470.106391] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [470.106558] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [470.106771] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [470.106986] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [470.107193] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [470.109313] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [470.109788] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [470.110013] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [470.110171] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [470.113888] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <6> [470.115026] [IGT] xe_configfs: finished subtest ctx-restore-mid-bb, SUCCESS <6> [470.115397] [IGT] xe_configfs: exiting, ret=0 <7> [470.115532] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [470.115656] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [470.115788] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [470.115927] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [470.116050] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [470.116167] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [470.116280] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [470.124294] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [470.124330] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [470.125140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [470.125163] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [470.126281] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [470.126688] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [470.126899] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [470.127405] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [470.128044] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [470.128054] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [470.128058] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.128060] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [470.128065] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [470.128068] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.128071] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [470.128083] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.128085] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [470.128089] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.128134] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [470.128297] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [470.128500] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [470.129143] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [470.129146] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [470.129149] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.129231] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [470.129246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [470.129252] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [470.129258] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [470.129264] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [470.129516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [470.129522] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [470.129526] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [470.129683] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [470.129687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [470.129691] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [470.129849] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [470.129859] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [470.129868] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [470.129877] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [470.129886] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [470.130220] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [470.130272] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [470.130281] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [470.130399] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [470.141742] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [470.157691] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [470.157716] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [470.157890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [470.157911] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [470.158961] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [470.159717] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [470.160231] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [470.160713] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [470.161192] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [470.161207] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [470.161214] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.161217] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [470.161227] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [470.161234] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.161239] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [470.161248] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.161252] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [470.161260] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.161302] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [470.161733] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [470.162107] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [470.163034] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [470.163042] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [470.163048] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [470.163228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [470.163241] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [470.163255] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [470.163268] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [470.163282] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [470.163731] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [470.163746] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [470.163758] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [470.164138] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [470.164151] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [470.164162] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [470.164588] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [470.164601] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [470.164611] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [470.164620] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [470.164627] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [470.164698] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [470.164738] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [470.164750] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [470.164801] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [470.174318] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <6> [470.198308] Console: switching to colour dummy device 80x25 <7> [470.207845] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed <7> [470.208203] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0 <7> [470.209021] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [470.209610] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [470.210203] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [470.211685] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [470.212546] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [470.213608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [470.214316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [470.214956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [470.215984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [470.217031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [470.220239] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2 <7> [470.224172] xe 0000:00:02.0: [drm:drm_client_release] fbdev <7> [470.226805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no) <7> [470.227360] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [470.227817] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1) <7> [470.228256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0) <7> [470.228777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0) <7> [470.229204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000) <7> [470.229670] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0) <7> [470.230093] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0) <7> [470.230577] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0) <7> [470.230973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0) <7> [470.231446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0) <7> [470.231891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0) <7> [470.232275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0) <7> [470.232720] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0) <7> [470.233082] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0) <7> [470.233435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0) <7> [470.233771] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0) <7> [470.234159] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0) <7> [470.234530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0) <7> [470.234931] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0) <7> [470.235262] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0) <7> [470.235703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0) <7> [470.236029] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0) <7> [470.236368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0) <7> [470.236696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0) <7> [470.237025] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0) <7> [470.237363] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0) <7> [470.237688] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0) <7> [470.238008] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0) <7> [470.238336] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0) <7> [470.238654] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0) <7> [470.238974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0) <7> [470.239292] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0) <7> [470.239739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0) <7> [470.240062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0) <7> [470.240515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0) <7> [470.240833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0) <7> [470.241147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0) <7> [470.241609] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [470.241935] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0 <7> [470.242576] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [470.242964] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0 <7> [470.243451] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0 <7> [470.243838] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz <7> [470.244246] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [470.244905] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz <7> [470.245289] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [470.245777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset] <7> [470.246144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no <7> [470.246488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [470.246798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [470.247090] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [470.247431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [470.247765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [470.248390] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7> [470.248641] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7> [470.270774] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [470.454475] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0 <7> [470.455073] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [470.458637] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off <7> [470.459078] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time <7> [470.459560] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7> [470.510808] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [470.511108] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A] <7> [470.511538] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7> [470.512309] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7> [470.512699] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7> [470.512613] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short <7> [470.513028] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [470.513270] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [470.513470] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [470.513668] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [470.513864] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [470.513838] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [470.514062] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [470.514272] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [470.514507] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [470.514697] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [470.514881] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [470.515055] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [470.515243] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [470.515428] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [470.515602] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [470.515867] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [470.516061] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [470.516264] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [470.516634] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [470.516946] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [470.517234] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [470.517500] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <7> [470.517785] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [470.551957] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7> [470.552476] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long <7> [470.552896] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7> [470.553157] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs <7> [470.553405] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A] <7> [470.561461] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs <7> [470.570531] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs <7> [470.582584] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs <7> [470.617247] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [470.617968] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [470.692068] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [470.695501] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [470.747314] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (264 ms remaining) <7> [471.014178] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7> [471.045274] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [471.046430] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [471.053357] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [471.058897] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7> [471.082296] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR <7> [471.086808] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker. <6> [471.138492] xe 0000:00:02.0: vgaarb: deactivate vga console <7> [471.139499] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error <6> [471.139938] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7> [471.139946] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7> [471.140095] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:) <7> [471.140178] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7> [471.141038] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7> [471.141172] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7> [471.141284] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7> [471.141387] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7> [471.141479] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7> [471.141546] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7> [471.141605] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7> [471.141663] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7> [471.141719] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7> [471.141785] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7> [471.141846] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7> [471.141922] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7> [471.141998] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7> [471.142198] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7> [471.142309] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7> [471.142425] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7> [471.142521] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7> [471.142609] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7> [471.142688] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7> [471.142762] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7> [471.142835] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [471.142908] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [471.142979] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7> [471.143067] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [471.143160] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [471.143253] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [471.143343] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7> [471.143418] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [471.143488] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [471.143558] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [471.143628] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7> [471.143697] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [471.143766] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [471.143836] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [471.143904] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7> [471.143973] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [471.144053] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [471.144143] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [471.144232] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7> [471.144321] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7> [471.144395] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7> [471.144463] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7> [471.144536] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7> [471.144865] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7> [471.144962] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7> [471.145064] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7> [471.145163] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7> [471.145272] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7> [471.145373] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7> [471.145465] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7> [471.145540] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7> [471.145609] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7> [471.145701] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7> [471.145775] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7> [471.145848] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7> [471.145921] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7> [471.145995] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7> [471.146099] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7> [471.146201] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7> [471.146300] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7> [471.146378] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7> [471.146461] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [471.146533] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [471.146603] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7> [471.146675] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7> [471.146743] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7> [471.146811] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [471.146878] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [471.146945] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7> [471.147024] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7> [471.147137] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [471.147264] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7> [471.147536] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [471.147620] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os <7> [471.147742] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [471.147868] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [471.148019] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7> [471.148132] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [471.148238] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [471.148336] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7> [471.148458] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [471.148573] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [471.148675] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [471.148782] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7> [471.148890] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7> [471.148997] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7> [471.149805] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7> [471.150665] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7> [471.150778] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7> [471.150865] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7> [471.150949] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7> [471.151039] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7> [471.151152] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7> [471.151273] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7> [471.151373] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7> [471.151457] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7> [471.151532] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7> [471.151606] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7> [471.151680] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7> [471.151755] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7> [471.151826] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7> [471.151902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7> [471.151972] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7> [471.152094] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7> [471.152186] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7> [471.152277] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7> [471.152358] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7> [471.152369] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7> [471.152428] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7> [471.152491] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7> [471.152496] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7> [471.152563] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7> [471.152568] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7> [471.152629] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7> [471.152636] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7> [471.152692] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7> [471.152702] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7> [471.152754] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7> [471.152769] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7> [471.152815] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7> [471.152835] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7> [471.152873] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7> [471.152901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7> [471.152931] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7> [471.152967] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7> [471.152989] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7> [471.153044] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7> [471.153069] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7> [471.153146] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7> [471.153221] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7> [471.153295] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7> [471.161598] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available. <6> [471.164553] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7> [471.166376] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [471.166505] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7> [471.166614] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7> [471.166737] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT) <7> [471.166857] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A] <7> [471.166958] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7> [471.167083] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7> [471.167188] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7> [471.167299] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7> [471.167401] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7> [471.167486] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7> [471.167584] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7> [471.167683] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7> [471.167781] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7> [471.167873] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0 <7> [471.167987] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0 <7> [471.168289] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [471.168386] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [471.168479] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [471.168570] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [471.168690] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [471.168908] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7> [471.170023] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on <7> [471.170113] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [471.170238] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060 <7> [471.180059] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [471.180185] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [471.180272] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled <7> [471.418994] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [471.430980] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7> [471.454960] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7> [471.490925] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7> [471.502920] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7> [471.562917] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [471.913800] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [471.913815] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [471.913817] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [471.913819] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [471.913821] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [471.913823] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [471.913824] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [471.913826] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [471.913827] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [471.913829] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [471.913872] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [471.913873] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [471.913874] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [471.913894] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [471.914022] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [471.925780] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms) <7> [471.937782] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0 <7> [471.937886] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless <7> [471.937976] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz <7> [471.938062] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0) <7> [471.938151] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000 <7> [471.938331] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7> [471.938410] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7> [471.938485] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7> [471.938557] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7> [471.938621] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7> [471.938715] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7> [471.938955] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7> [471.939089] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [471.939206] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1] <7> [471.939674] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7> [471.939799] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [471.939892] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2] <7> [471.940127] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7> [471.940228] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7> [471.940316] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3] <7> [471.940659] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled <7> [471.940765] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled <7> [471.940854] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled <7> [471.940924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A <7> [471.940996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A <7> [471.941062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A <7> [471.941126] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A <7> [471.941189] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A <7> [471.941252] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A <7> [471.941315] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B <7> [471.941376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B <7> [471.941438] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B <7> [471.941504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B <7> [471.941572] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B <7> [471.941650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B <7> [471.941727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C <7> [471.941815] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C <7> [471.941878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C <7> [471.941944] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C <7> [471.942011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C <7> [471.942078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C <7> [471.942145] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A <7> [471.942211] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [471.942274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7> [471.942337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A <7> [471.942400] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B <7> [471.942462] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C <7> [471.942526] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [471.942587] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7> [471.942648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A <7> [471.942718] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B <7> [471.942804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C <7> [471.942879] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7> [471.942940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7> [471.943003] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A <7> [471.943065] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B <7> [471.943127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C <7> [471.943193] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0 <7> [471.943270] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [471.943347] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7> [471.943427] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7> [471.943505] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7> [471.943580] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7> [471.943648] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7> [471.943725] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled <7> [471.943803] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled <7> [471.943866] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled <7> [471.943929] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled <7> [471.943989] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz <7> [471.944053] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz <7> [471.944116] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz <7> [471.944180] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz <7> [471.944243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz <7> [471.944304] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz <7> [471.944367] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz <7> [471.944428] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz <7> [471.944488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz <7> [471.944542] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz <7> [471.944597] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz <7> [471.944652] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz <7> [471.944712] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz <7> [471.944800] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz <7> [471.944860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz <7> [471.944919] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz <7> [471.944979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz <7> [471.945040] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz <7> [471.945102] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz <7> [471.945163] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz <7> [471.945223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz <7> [471.945288] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [471.945346] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [471.945403] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no <7> [471.945459] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0 <7> [471.945542] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7> [471.945618] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7> [471.945717] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no <7> [471.945841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state] <7> [471.945924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state] <7> [471.946007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state] <7> [471.946089] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <6> [471.947593] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [471.949905] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [471.949992] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7> [471.950054] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7> [471.950105] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [471.950153] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [471.950200] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [471.950247] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [471.950293] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [471.950339] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [471.950385] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [471.950430] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [471.950475] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [471.950520] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [471.950564] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [471.950610] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [471.950686] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7> [471.961895] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [471.962587] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [471.962667] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7> [471.962723] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7> [471.962798] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7> [471.962853] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7> [471.962908] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6> [472.478095] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6> [472.478101] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6> [472.478102] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7> [472.478248] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7> [472.478345] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [472.478432] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [472.478502] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [472.478661] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7> [472.478792] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7> [472.478919] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7> [472.478993] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7> [472.479062] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7> [472.479127] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7> [472.480097] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7> [472.480182] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7> [472.480258] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7> [472.480326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7> [472.480391] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7> [472.480455] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7> [472.480518] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7> [472.480590] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7> [472.480650] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7> [472.480706] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7> [472.480762] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7> [472.480818] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7> [472.480873] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7> [472.480927] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7> [472.480980] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7> [472.481033] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7> [472.481087] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7> [472.481141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7> [472.481195] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7> [472.481247] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7> [472.481301] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7> [472.481353] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7> [472.481406] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7> [472.481457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7> [472.481508] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7> [472.481559] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7> [472.481632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7> [472.481692] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7> [472.481752] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7> [472.481810] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7> [472.481865] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7> [472.481920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7> [472.481978] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7> [472.482037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7> [472.482094] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7> [472.482152] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7> [472.482208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7> [472.482267] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7> [472.482326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7> [472.482383] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7> [472.482554] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7> [472.482620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7> [472.482674] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7> [472.482729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7> [472.482875] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7> [472.482930] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7> [472.482983] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7> [472.483034] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7> [472.483161] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7> [472.483214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7> [472.483268] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7> [472.483321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7> [472.483375] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7> [472.483427] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7> [472.483478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7> [472.483764] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7> [472.483855] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7 <7> [472.483903] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7> [472.483949] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7> [472.483995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7> [472.484042] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2 <7> [472.484088] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7> [472.484134] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7> [472.484179] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7> [472.484224] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7> [472.484269] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7> [472.484313] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7> [472.484357] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7> [472.484402] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7> [472.484445] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7> [472.484510] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7> [472.484589] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7> [472.485002] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe] <7> [472.487183] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7> [472.504549] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7> [472.515735] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7> [472.516148] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7> [472.517369] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7> [472.517456] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7> [472.517514] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7> [472.517587] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7> [472.517644] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7> [472.517698] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7> [472.517750] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7> [472.517806] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7> [472.517865] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000\|0x18000 <7> [472.519980] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7> [472.520064] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e\|0x606 <7> [472.520125] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7> [472.521673] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7> [472.521751] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6> [472.525047] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7> [472.529241] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [472.529386] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [472.529497] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7> [472.529629] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [472.529724] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [472.529817] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [472.529911] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [472.530004] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [472.530097] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [472.530189] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [472.530283] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [472.530377] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [472.530471] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [472.530669] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6> [472.531486] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6> [472.533459] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6> [472.534812] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7> [472.534974] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7> [472.535169] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7> [472.556843] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [472.557368] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [472.557592] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7> [472.557751] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7> [472.557904] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7> [472.558050] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7> [472.558214] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6> [472.558369] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6> [472.558375] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6> [472.558379] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6> [472.558383] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6> [472.558388] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6> [472.558392] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6> [472.558397] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6> [472.558401] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6> [472.558406] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6> [472.558411] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7> [472.558772] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7> [472.559001] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [472.559248] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [472.559518] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [472.559795] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [472.560007] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [472.560219] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [472.560480] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [472.560721] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [472.560977] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [472.561460] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7> [472.561688] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access <7> [472.561897] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access <7> [472.562103] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access <7> [472.562311] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access <7> [472.562508] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access <7> [472.562754] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access <7> [472.562960] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access <7> [472.563153] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access <7> [472.563346] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access <7> [472.563672] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7> [472.565616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7> [472.565799] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7> [472.565976] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7> [472.566140] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7> [472.566301] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7> [472.566454] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7> [472.566633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7> [472.566823] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7> [472.566996] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7> [472.567150] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7> [472.567297] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7> [472.567442] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7> [472.567590] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7> [472.567727] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7> [472.567862] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7> [472.568001] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7> [472.568124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7> [472.568246] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7> [472.568367] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7> [472.568486] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7> [472.568628] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7> [472.568747] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7> [472.568870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7> [472.568979] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7> [472.569090] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7> [472.569194] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7> [472.569298] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7> [472.569401] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7> [472.569498] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7> [472.569633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7> [472.569748] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7> [472.569862] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c <7> [472.569970] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1 <7> [472.570073] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0 <7> [472.570178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c <7> [472.570280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1 <7> [472.570382] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0 <7> [472.570478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c <7> [472.570587] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1 <7> [472.570681] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0 <7> [472.571350] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7> [472.571445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7> [472.571536] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7> [472.571655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c <7> [472.571740] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1 <7> [472.571824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0 <7> [472.571916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c <7> [472.572011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1 <7> [472.572107] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0 <7> [472.572192] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c <7> [472.572274] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1 <7> [472.572351] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0 <7> [472.572884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7> [472.572962] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7> [472.573037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7> [472.573808] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7> [472.573930] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7 <7> [472.573993] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7> [472.574053] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7> [472.574111] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7> [472.574168] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016 <7> [472.574223] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7> [472.574277] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7> [472.574330] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7> [472.574383] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7> [472.574436] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7> [472.574488] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7> [472.574546] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7> [472.574596] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7> [472.574646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7> [472.574733] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7> [472.574829] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7> [472.576983] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe] <7> [472.596294] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7> [472.617664] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7> [472.618181] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7> [472.620259] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7> [472.620445] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [472.624684] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7> [472.624914] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [472.629384] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7> [472.629691] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7> [472.675402] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7> [472.677257] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [472.677908] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [472.678474] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [472.679029] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7> [472.679838] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7> [472.680295] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7> [472.680765] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7> [472.682135] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008 <7> [472.682802] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108 <7> [472.683398] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208 <7> [472.683989] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308 <7> [472.684553] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8 <7> [472.685100] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008 <7> [472.685691] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108 <7> [472.686232] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208 <7> [472.686784] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308 <7> [472.687294] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8 <7> [472.687773] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008 <7> [472.688205] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108 <7> [472.688661] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208 <7> [472.689080] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308 <7> [472.689457] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8 <7> [472.690643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400 <7> [472.691109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400 <7> [472.691526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [472.691892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400 <7> [472.692250] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0 <7> [472.692744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset] <7> [472.693083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset] <7> [472.693397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset] <7> [472.693872] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071) <7> [472.694202] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [472.694528] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B] <7> [472.694797] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C] <7> [472.706249] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs <7> [472.707583] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered <7> [472.707751] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7> [472.708215] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7> [472.709317] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event <7> [472.709395] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs <7> [472.710055] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7> [472.710997] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event <7> [472.711069] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs <7> [472.711717] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7> [472.712661] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event <7> [472.712720] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs <7> [472.713318] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7> [472.714271] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event <6> [472.714322] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7> [472.714331] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6> [472.731713] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6> [472.736741] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21 <7> [472.737635] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7> [472.737785] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384 <6> [472.739667] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7> [472.742291] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping <7> [472.742413] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping <7> [472.742508] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping <7> [472.742587] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7> [472.742827] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [472.742896] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [472.742905] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [472.743513] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [472.743828] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [472.743944] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [472.744055] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [472.744187] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [472.744195] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [472.744199] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [472.744201] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [472.744204] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [472.744207] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [472.744209] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [472.744212] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [472.744215] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [472.744218] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [472.744243] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [472.744356] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [472.744466] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7> [472.744974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected <7> [472.744994] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5> [472.745083] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [472.745086] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [472.745088] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [472.745155] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [472.745159] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [472.745163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [472.745168] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [472.745173] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [472.745513] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [472.745639] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] status updated from unknown to disconnected <7> [472.745649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [472.745663] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [472.745668] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [472.745791] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [472.745890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] status updated from unknown to disconnected <7> [472.745897] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [472.745905] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [472.745909] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [472.746033] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7> [472.746134] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] status updated from unknown to disconnected <7> [472.746140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [472.746148] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [472.746153] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [472.746156] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [472.746160] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [472.746186] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [472.746205] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [472.746210] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7> [472.746667] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [472.746877] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [472.747080] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [472.747206] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [472.747409] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7> [472.747419] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7> [472.779828] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000 <6> [472.780641] fbcon: xedrmfb (fb0) is primary device <6> [472.781954] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7> [472.782092] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7> [472.782233] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000 <7> [472.782272] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7> [472.782348] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7> [472.782485] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7> [472.782601] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A] <7> [472.782714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes) <7> [472.782825] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [472.782934] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0) <7> [472.783041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4) <7> [472.783146] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288) <7> [472.783252] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100) <7> [472.783356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1) <7> [472.783457] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880) <7> [472.783589] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040) <7> [472.783690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880) <7> [472.783787] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040) <7> [472.783885] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928) <7> [472.783980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960) <7> [472.784074] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800) <7> [472.784170] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800) <7> [472.784266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803) <7> [472.784347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809) <7> [472.784427] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906) <7> [472.784560] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906) <7> [472.784662] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880) <7> [472.784763] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040) <7> [472.784848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880) <7> [472.784927] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040) <7> [472.785002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928) <7> [472.785075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960) <7> [472.785147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800) <7> [472.785220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800) <7> [472.785291] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803) <7> [472.785361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809) <7> [472.785431] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906) <7> [472.785530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906) <7> [472.785622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1) <7> [472.785712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2) <7> [472.785797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8) <7> [472.785868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state <7> [472.785937] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7> [472.786005] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [472.786079] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0 <7> [472.786153] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000 <7> [472.786227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [472.786297] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000 <7> [472.786364] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000 <7> [472.786431] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000 <7> [472.786520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000 <7> [472.786607] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000 <7> [472.786695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000 <7> [472.786777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000 <7> [472.786846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000 <7> [472.786912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000 <7> [472.786978] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000 <7> [472.787044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000 <7> [472.787113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [472.787183] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7> [472.787255] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [472.787335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [472.787426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7> [472.787555] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7> [472.787648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7> [472.787740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [472.787848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [472.787940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [472.788023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [472.788100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [472.788175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30) <7> [472.788250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710) <7> [472.788320] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710) <7> [472.788393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000) <7> [472.788485] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [472.788913] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [472.788978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [472.789040] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7> [472.789098] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7> [472.789157] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [472.789213] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7> [472.789269] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7> [472.789326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7> [472.789404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1 <7> [472.789700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7> [472.789810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7> [472.789900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [472.789979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7> [472.790054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7> [472.790132] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz <7> [472.790226] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz <7> [472.790303] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing <7> [472.790377] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz <7> [472.790456] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0 <7> [472.790586] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0 <7> [472.790682] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0 <7> [472.790780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [472.790882] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7> [472.790980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7> [472.791064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [472.791137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [472.791210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [472.791281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [472.791352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7> [472.791423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [472.791509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7> [472.791601] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [472.791691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7> [472.791779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [472.791848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7> [472.791917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7> [472.791986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7> [472.792059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7> [472.792127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7> [472.792196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7> [472.792265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7> [472.792333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [472.792401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [472.792479] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7> [472.792566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7> [472.792653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0 <7> [472.792740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [472.792816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [472.792883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [472.792949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [472.793016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7> [472.793084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7> [472.793149] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7> [472.793215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [472.793283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [472.793352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [472.793420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7> [472.793525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7> [472.793615] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7> [472.793704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7> [472.793791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7> [472.793878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7> [472.793957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7> [472.794025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7> [472.794091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7> [472.794158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7> [472.794223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [472.794289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [472.794354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [472.794419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [472.794502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [472.794587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [472.794671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [472.794755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [472.794824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [472.794888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [472.794952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [472.795017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [472.795081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [472.795145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [472.795211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [472.795275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7> [472.795340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [472.795405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [472.795480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [472.795568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [472.795665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [472.795949] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7> [472.796054] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7> [472.796139] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no) <7> [472.796214] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7> [472.796292] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A] <7> [472.796358] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1] <7> [472.796423] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A] <7> [472.796500] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B] <7> [472.796585] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C] <7> [472.796666] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2] <7> [472.796747] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A] <7> [472.796814] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B] <7> [472.796874] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C] <7> [472.796934] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3] <7> [472.796994] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A] <7> [472.797053] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B] <7> [472.797112] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C] <7> [472.797189] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [472.797324] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *) <7> [472.797385] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7> [472.797483] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [472.797580] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7> [472.798494] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on <7> [472.798583] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining) <7> [472.798687] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068 <7> [472.804848] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7> [472.808511] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [472.808610] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on <7> [472.808709] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b <7> [473.018428] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7> [473.020095] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7> [473.021187] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates <7> [473.022047] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7> [473.023165] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [473.024171] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7> [473.025281] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK <7> [473.025628] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7> [473.027086] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7> [473.027441] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7> [473.028168] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [473.028663] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7> [473.028949] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7> [473.029264] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518 <7> [473.045443] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7> [473.046890] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1] <7> [473.047203] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [473.048368] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp <6> [473.050401] Console: switching to colour frame buffer device 180x56 <6> [473.101748] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7> [473.101774] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7> [473.102330] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7> [473.102910] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7> [473.103392] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7> [473.103893] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7> [473.104376] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7> [473.104808] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7> [473.105233] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7> [473.105753] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7> [473.106225] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7> [473.106713] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7> [473.107084] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7> [473.107470] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7> [473.107867] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7> [473.108194] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7> [473.108556] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7> [473.108911] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7> [473.109227] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7> [473.109584] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7> [473.109901] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7> [473.110240] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7> [473.110560] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7> [473.112152] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [473.112183] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [473.112392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [473.112288] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7> [473.112418] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [473.112697] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7> [473.113157] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7> [473.113636] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7> [473.114025] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [473.114351] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [473.114701] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [473.115008] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [473.115292] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [473.116040] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [473.116679] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [473.117145] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [473.117771] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [473.118338] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [473.118379] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [473.118389] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.118395] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [473.118406] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [473.118416] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.118424] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [473.118434] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.118440] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [473.118451] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.118527] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [473.119005] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [473.119616] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [473.120998] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [473.121012] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [473.121020] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.121415] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [473.121439] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [473.121463] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [473.121487] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [473.121512] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [473.122182] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [473.122207] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [473.122224] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [473.122919] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [473.122944] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [473.122826] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7> [473.122965] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [473.124053] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [473.124077] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [473.124096] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [473.124111] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [473.124124] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [473.124237] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [473.124306] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [473.124323] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [473.124437] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [473.129757] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [473.130108] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [473.145978] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [473.146053] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7> [473.178868] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7> [473.178907] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7> [473.179226] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] <7> [473.179270] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1] <7> [473.180381] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [473.180989] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [473.181548] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [473.182636] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7> [473.184023] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7> [473.184991] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [473.185874] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7> [473.186786] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5> [473.186819] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [473.186833] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.186840] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7> [473.186858] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5> [473.186873] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.186884] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor <5> [473.186900] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.186909] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0 <5> [473.186925] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.187172] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes <7> [473.187872] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7> [473.188458] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5> [473.189768] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [473.189780] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5> [473.189790] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7> [473.190140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes: <7> [473.190165] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7> [473.190191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7> [473.190216] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] <7> [473.190239] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1] <7> [473.190920] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected <7> [473.190941] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] <7> [473.190957] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2] <7> [473.191649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected <7> [473.191665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] <7> [473.191678] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3] <7> [473.192185] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected <7> [473.192204] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes <7> [473.192222] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no <7> [473.192236] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no <7> [473.192250] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no <7> [473.192374] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7> [473.192432] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800 <7> [473.192449] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7> [473.192517] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0) <7> [473.194999] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [473.195413] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [473.212815] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7> [473.218843] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7> [473.229398] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [473.230094] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [473.230776] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<6> [454.886721] Console: switching to colour dummy device 80x25

<7> [454.900696] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [454.900885] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [454.906915] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [454.909815] [IGT] xe_configfs: starting subtest ctx-restore-mid-bb

<7> [454.910145] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [454.910361] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [454.910571] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [454.910763] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [454.910950] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [454.911721] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [454.911775] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [454.911891] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [454.911996] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [454.912096] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [454.912191] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [454.912304] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [454.912433] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [454.912563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [454.912681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [454.912796] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [454.912908] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [454.913252] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [454.939982] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [454.942743] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [454.943114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [454.943444] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [454.943801] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [454.944116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [454.944425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [454.944758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [454.945070] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [454.945384] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [454.945774] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [454.946058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [454.946370] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [454.946636] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [454.946874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [454.947110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [454.947338] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [454.947562] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [454.947779] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [454.948012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [454.948210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [454.948449] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [454.948753] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [454.948962] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [454.949151] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [454.949340] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [454.949516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [454.949768] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [454.949968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [454.950142] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [454.950316] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [454.950490] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [454.950750] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [454.950918] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [454.951076] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [454.951232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [454.951385] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [454.951585] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [454.951757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [454.951922] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [454.952066] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [454.952337] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [454.952453] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [454.952641] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [454.952786] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [454.952940] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [454.953078] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [454.953215] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [454.953384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [454.953549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [454.953697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [454.953824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [454.953947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [454.954080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [454.954213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [454.954535] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [454.954678] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [455.162785] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [455.164422] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [455.175071] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [455.175477] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [455.175957] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [455.227818] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [455.228382] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [455.236662] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [455.237001] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [455.237057] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [455.238175] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [455.238508] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [455.239823] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [455.240055] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [455.240253] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [455.240444] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [455.240716] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [455.240942] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [455.241142] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [455.241335] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [455.241537] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [455.241761] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [455.241954] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [455.242132] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [455.242341] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [455.242554] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [455.242859] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [455.243056] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [455.243246] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [455.243631] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [455.243946] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [455.244224] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [455.244447] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [455.244764] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [455.268451] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [455.268917] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [455.269329] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [455.269782] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [455.275944] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [455.280254] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [455.284859] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [455.290774] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [455.321655] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [455.327041] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [455.402820] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [455.404627] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [455.488263] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (249 ms remaining)

<7> [455.746703] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [455.767185] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [455.802456] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<7> [455.804048] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker.

<6> [455.925603] xe 0000:00:02.0: Found custom settings in configfs

<6> [455.925680] xe 0000:00:02.0: vgaarb: deactivate vga console

<7> [455.926751] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error

<6> [455.927121] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [455.927128] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [455.927197] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [455.927258] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [455.928221] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [455.928347] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [455.928448] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [455.928559] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [455.928666] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [455.928725] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [455.928782] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [455.928837] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [455.928891] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [455.928954] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [455.929013] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [455.929086] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [455.929157] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [455.929228] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [455.929304] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [455.929400] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [455.929489] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [455.929578] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [455.929659] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [455.929735] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [455.929808] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [455.929880] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [455.929951] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [455.930021] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [455.930091] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [455.930161] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [455.930230] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [455.930305] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [455.930396] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [455.930484] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [455.930565] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [455.930639] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [455.930707] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [455.930775] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [455.930841] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [455.930907] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [455.930974] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [455.931041] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [455.931107] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [455.931174] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [455.931240] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [455.931306] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [455.931390] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [455.931707] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [455.931809] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [455.931902] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [455.931984] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [455.932055] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [455.932124] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [455.932197] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [455.932268] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [455.932350] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [455.932446] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [455.932535] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [455.932622] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [455.932697] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [455.932768] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [455.932845] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [455.932921] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [455.932989] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [455.933055] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [455.933125] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [455.933193] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [455.933261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [455.933328] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [455.933562] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [455.933636] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [455.933703] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [455.933768] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [455.933839] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [455.934175] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [455.934273] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [455.934539] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [455.934622] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [455.934734] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [455.934857] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [455.935005] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [455.935095] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [455.935169] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [455.935244] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [455.935351] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [455.935466] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [455.935585] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [455.935711] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [455.935823] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [455.935940] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [455.936427] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [455.937148] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [455.937242] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [455.937318] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [455.937419] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [455.937513] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [455.937607] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [455.937632] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [455.937699] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [455.937771] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [455.937776] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [455.937849] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [455.937850] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [455.937918] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [455.937924] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [455.937986] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [455.937998] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [455.938051] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [455.938071] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [455.938114] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [455.938144] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [455.938177] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [455.938217] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [455.938239] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [455.938300] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [455.938297] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [455.938378] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [455.938451] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [455.938441] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [455.938522] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [455.938541] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [455.938591] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [455.938638] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [455.938719] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [455.938793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [455.938865] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [455.938939] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [455.939029] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [455.939115] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [455.939200] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [455.939284] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [455.939367] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [455.939456] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [455.939545] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [455.939634] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [455.943406] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<7> [455.948933] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [455.949059] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [455.949168] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [455.949323] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [455.949493] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [455.949624] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [455.949744] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [455.949850] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [455.949958] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [455.950059] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [455.950159] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [455.950257] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [455.950359] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [455.950456] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [455.950557] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [455.950750] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [455.950837] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [455.950922] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [455.951008] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [455.951091] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<6> [455.951235] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [455.951204] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [455.951313] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [455.952345] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [455.952432] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [455.952539] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [455.962376] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [455.962491] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [455.962573] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [456.206342] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [456.218333] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [456.242310] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [456.278282] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [456.290279] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [456.350279] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [456.698198] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [456.698210] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [456.698212] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [456.698214] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [456.698216] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [456.698218] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [456.698220] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [456.698222] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [456.698223] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [456.698225] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [456.698282] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [456.698283] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [456.698284] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [456.698306] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [456.698389] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [456.710175] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [456.722180] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [456.722269] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [456.722351] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [456.722431] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [456.722514] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [456.722676] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [456.722752] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [456.722825] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [456.722889] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [456.722952] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [456.723046] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [456.723268] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [456.723392] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [456.723504] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [456.723883] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [456.723985] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [456.724073] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [456.724320] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [456.724435] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [456.724529] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [456.724860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [456.724944] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [456.725027] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [456.725093] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [456.725163] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [456.725228] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [456.725297] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [456.725362] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [456.725424] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [456.725486] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [456.725547] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [456.725608] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [456.725668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [456.725728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [456.725787] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [456.725846] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [456.725905] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [456.725963] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [456.726023] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [456.726085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [456.726147] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [456.726223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [456.726289] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [456.726351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [456.726412] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [456.726473] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [456.726534] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [456.726595] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [456.726650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [456.726706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [456.726760] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [456.726819] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [456.726886] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [456.726951] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [456.727015] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [456.727078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [456.727134] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [456.727206] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [456.727283] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [456.727359] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [456.727438] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [456.727517] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [456.727596] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [456.727670] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [456.727748] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [456.727816] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [456.727882] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [456.727944] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [456.728003] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [456.728060] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [456.728117] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [456.728186] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [456.728248] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [456.728309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [456.728369] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [456.728429] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [456.728488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [456.728543] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [456.728597] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [456.728651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [456.728705] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [456.728761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [456.728818] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [456.728875] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [456.728931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [456.728986] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [456.729040] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [456.729094] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [456.729148] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [456.729228] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [456.729286] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [456.729342] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [456.729400] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [456.729488] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [456.729568] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [456.729659] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [456.729763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [456.729838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [456.729912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [456.729985] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [456.731463] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [456.733721] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [456.733803] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [456.733853] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [456.733902] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [456.733949] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [456.733995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [456.734041] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [456.734087] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [456.734132] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [456.734207] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [456.734257] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [456.734306] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [456.734355] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [456.734405] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [456.734454] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [456.734537] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [456.745241] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [456.745964] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [456.746034] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [456.746084] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [456.746132] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [456.746208] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [456.746257] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [457.271140] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [457.271145] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [457.271146] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [457.271308] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [457.271402] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [457.271483] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [457.271549] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [457.271662] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [457.271762] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [457.271874] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [457.271933] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [457.271994] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [457.272073] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [457.273132] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [457.273201] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [457.273282] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [457.273357] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [457.273421] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [457.273484] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [457.273543] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [457.273603] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [457.273660] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [457.273715] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [457.273771] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [457.273826] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [457.273880] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [457.273933] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [457.273986] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [457.274045] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [457.274106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [457.274158] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [457.274214] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [457.274271] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [457.274323] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [457.274374] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [457.274426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [457.274477] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [457.274528] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [457.274578] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [457.274636] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [457.274694] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [457.274750] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [457.274807] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [457.274862] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [457.274917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [457.274974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [457.275036] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [457.275092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [457.275161] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [457.275234] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [457.275301] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [457.275358] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [457.275415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [457.275598] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [457.275652] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [457.275705] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [457.275757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [457.275887] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [457.275940] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [457.275991] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [457.276050] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [457.276199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [457.276269] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [457.276325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [457.276376] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [457.276429] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [457.276480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [457.276532] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [457.276829] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [457.276928] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [457.276977] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [457.277027] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [457.277075] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [457.277124] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [457.277180] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [457.277240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [457.277294] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [457.277339] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [457.277384] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [457.277428] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [457.277472] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [457.277516] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [457.277559] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [457.277623] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [457.277688] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [457.278125] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [457.280478] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [457.298002] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [457.309172] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [457.309528] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [457.310461] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [457.310555] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [457.310615] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [457.310671] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [457.310728] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [457.310784] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [457.310838] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [457.310895] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [457.310953] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [457.313301] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [457.313383] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [457.313444] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [457.315388] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [457.315474] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [457.317653] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [457.321917] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [457.322144] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [457.322253] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [457.322352] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [457.322447] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [457.322542] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [457.322638] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [457.322741] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [457.322854] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [457.322966] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [457.323126] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [457.323241] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [457.323343] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [457.323443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [457.324423] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [457.327290] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [457.328982] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [457.329230] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [457.329455] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [457.351274] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [457.351801] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [457.351988] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [457.352226] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [457.352381] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [457.352530] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [457.352701] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [457.352865] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [457.352871] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [457.352876] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [457.352880] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [457.352883] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [457.352888] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [457.352892] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [457.352897] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [457.352901] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [457.352906] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [457.353222] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [457.353420] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [457.353634] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [457.353831] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [457.354056] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [457.354289] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [457.354485] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [457.354681] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [457.354861] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [457.355091] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [457.355511] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [457.355681] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [457.355874] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [457.356147] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [457.356346] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [457.356544] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [457.356730] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [457.356928] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [457.357157] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [457.357375] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [457.357704] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [457.359688] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [457.359856] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [457.360037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [457.360197] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [457.360351] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [457.360511] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [457.360660] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [457.360845] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [457.361015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [457.361154] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [457.361296] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [457.361435] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [457.361572] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [457.361702] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [457.361829] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [457.361953] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [457.362099] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [457.362223] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [457.362344] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [457.362462] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [457.362591] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [457.362724] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [457.362838] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [457.362949] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [457.363079] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [457.363185] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [457.363286] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [457.363388] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [457.363486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [457.363597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [457.363723] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [457.363851] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [457.363956] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [457.364092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [457.364211] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [457.364308] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [457.364404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [457.364497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [457.364589] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [457.364680] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [457.365359] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [457.365462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [457.365560] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [457.365648] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [457.365731] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [457.365814] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [457.365894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [457.365972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [457.366067] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [457.366148] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [457.366227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [457.366305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [457.366838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [457.366918] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [457.366999] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [457.367822] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [457.367937] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [457.368000] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [457.368088] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [457.368148] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [457.368206] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [457.368263] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [457.368320] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [457.368377] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [457.368432] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [457.368486] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [457.368540] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [457.368593] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [457.368646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [457.368697] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [457.368781] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [457.368874] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [457.371014] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [457.391094] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [457.412286] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [457.412744] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [457.414302] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [457.414457] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [457.417897] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [457.418067] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [457.421865] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [457.422016] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [457.466076] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [457.467852] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [457.468331] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [457.468731] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [457.469145] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [457.469703] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [457.470047] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [457.470417] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [457.471692] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [457.472227] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [457.472735] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [457.473274] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [457.473718] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [457.474142] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [457.474520] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [457.474894] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [457.475336] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [457.475704] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [457.476163] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [457.476593] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [457.476990] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [457.477316] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [457.477637] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [457.478416] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [457.478760] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [457.479086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [457.479386] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [457.479665] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [457.480111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [457.480414] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [457.480677] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [457.481043] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [457.482198] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [457.482481] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [457.482704] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [457.490115] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [457.491580] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [457.491725] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [457.492068] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [457.492902] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [457.492969] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [457.493532] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [457.494203] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [457.494249] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [457.494680] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [457.495322] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [457.495358] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [457.495780] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [457.496692] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [457.496724] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [457.496729] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [457.506743] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [457.510750] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16

<7> [457.512039] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [457.512172] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [457.512666] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [457.513898] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [457.514147] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [457.514274] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [457.514363] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [457.514471] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [457.514555] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [457.514629] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [457.514727] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [457.514804] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [457.514888] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [457.515324] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [457.515407] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [457.515484] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [457.515557] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [457.515765] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [457.515820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [457.515826] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [457.516310] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [457.516602] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [457.516703] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [457.516803] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [457.516911] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [457.516915] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [457.516917] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.516918] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [457.516921] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [457.516922] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.516924] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [457.516926] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.516927] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [457.516929] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.516946] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [457.517050] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [457.517149] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [457.517618] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [457.517630] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [457.517839] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [457.517842] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [457.517844] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.517891] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [457.517895] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [457.517899] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [457.517903] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [457.517906] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [457.518091] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [457.518096] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [457.518099] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [457.518221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [457.518225] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [457.518228] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [457.518346] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [457.518349] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [457.518352] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [457.518355] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [457.518357] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [457.518374] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [457.518387] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [457.518390] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [457.518402] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [457.518462] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [457.518468] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [457.525319] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [457.525764] fbcon: xedrmfb (fb0) is primary device

<7> [457.526689] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [457.526804] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [457.526909] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [457.527037] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [457.527143] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [457.527247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [457.527347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [457.527447] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [457.527546] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [457.527644] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [457.527742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [457.527838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [457.527932] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [457.528042] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [457.528137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [457.528230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [457.528323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [457.528415] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [457.528508] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [457.528600] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [457.528692] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [457.528784] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [457.528876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [457.528975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [457.529068] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [457.529161] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [457.529256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [457.529348] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [457.529441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [457.529520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [457.529613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [457.529703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [457.529794] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [457.529883] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [457.529959] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [457.530064] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [457.530153] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [457.530241] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [457.530321] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [457.530395] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [457.530469] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [457.530542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [457.530617] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [457.530689] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [457.530761] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [457.530834] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [457.530905] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [457.530983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [457.531069] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [457.531155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [457.531240] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [457.531324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [457.531410] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [457.531498] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [457.531587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [457.531675] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [457.531757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [457.531830] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [457.531903] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [457.531986] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [457.532074] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [457.532160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [457.532246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [457.532333] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [457.532420] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [457.532507] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [457.532594] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [457.532679] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [457.532764] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [457.532845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [457.532916] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [457.533034] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [457.533121] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [457.533330] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [457.533418] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [457.533509] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [457.533589] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [457.533661] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [457.533732] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [457.533803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [457.533873] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [457.533969] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [457.534072] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [457.534171] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [457.534269] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [457.534365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [457.534459] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [457.534556] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [457.534677] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [457.534775] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [457.534871] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [457.534970] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [457.535251] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [457.535368] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [457.535475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [457.535576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [457.535675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [457.535770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [457.535865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [457.535958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [457.536077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [457.536171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [457.536264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [457.536356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [457.536447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [457.536537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [457.536626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [457.536716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [457.536806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [457.536895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [457.536991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [457.537079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [457.537167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [457.537255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [457.537343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [457.537417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [457.537490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [457.537564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [457.537638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [457.537712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [457.537786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [457.537871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [457.537976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [457.538075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [457.538180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [457.538272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [457.538359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [457.538449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [457.538539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [457.538621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [457.538696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [457.538768] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [457.538841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [457.538926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [457.539032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [457.539120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [457.539205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [457.539290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [457.539376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [457.539463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [457.539549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [457.539628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [457.539698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [457.539769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [457.539852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [457.539935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [457.540034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [457.540118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [457.540202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [457.540280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [457.540350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [457.540420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [457.540490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [457.540562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [457.540633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [457.540705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [457.540775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [457.540844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [457.540914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [457.541001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [457.541257] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [457.541354] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [457.541456] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [457.541541] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [457.541624] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [457.541699] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [457.541783] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [457.541865] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [457.541946] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [457.542044] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [457.542123] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [457.542202] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [457.542280] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [457.542357] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [457.542440] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [457.542526] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [457.542600] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [457.542685] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [457.542827] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [457.542893] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [457.542995] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [457.543092] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [457.544235] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [457.544325] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [457.544415] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [457.553993] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [457.554139] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [457.554261] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<6> [457.577493] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [457.577851] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [457.600788] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [457.765959] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [457.767554] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [457.768571] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [457.769339] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [457.770484] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [457.771548] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [457.772794] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [457.773225] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [457.774774] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [457.775369] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [457.776330] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [457.776932] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [457.777422] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [457.777994] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [457.793775] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [457.796811] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [457.797337] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [457.798685] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [457.800949] Console: switching to colour frame buffer device 180x56

<6> [457.849693] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [457.849716] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [457.850273] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [457.850722] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [457.851194] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [457.851611] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [457.852040] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [457.852438] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [457.852824] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [457.853290] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [457.853676] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [457.854096] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [457.854547] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [457.854922] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [457.855280] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [457.855635] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [457.856022] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [457.856340] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [457.856679] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [457.857024] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [457.857339] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [457.857647] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [457.857948] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [457.859360] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [457.859572] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [457.859841] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [457.860146] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [457.860445] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [457.860461] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [457.860571] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [457.860585] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [457.863409] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [457.863615] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [457.863776] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [457.863950] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [457.864112] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [457.866428] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [457.866730] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [457.866839] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [457.867120] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [457.867439] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [457.867454] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [457.867460] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.867464] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [457.867473] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [457.867480] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.867486] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [457.867494] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.867498] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [457.867506] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.867539] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [457.867839] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [457.867901] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [457.868022] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [457.868530] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [457.868532] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [457.868533] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [457.868587] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [457.868591] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [457.868594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [457.868599] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [457.868603] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [457.868761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [457.868765] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [457.868768] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [457.868889] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [457.869146] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [457.869448] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [457.870351] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [457.870714] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [457.871127] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [457.871463] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [457.871968] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [457.871982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [457.871989] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [457.872220] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [457.872226] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [457.872232] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [457.872236] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [457.872240] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [457.872273] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [457.872292] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [457.872297] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [457.872321] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [457.877129] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [457.914674] Console: switching to colour dummy device 80x25

<7> [457.927151] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [457.927279] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [457.927613] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [457.927934] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [457.928188] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [457.928481] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [457.928797] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [457.929239] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [457.929631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [457.930058] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [457.930457] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [457.930826] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [457.932134] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [457.943735] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [457.946354] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [457.946857] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [457.947437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [457.947895] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [457.948324] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [457.948798] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [457.949312] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [457.949755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [457.950196] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [457.950646] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [457.951113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [457.951493] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [457.951933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [457.952320] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [457.952736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [457.953107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [457.953432] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [457.953758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [457.954185] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [457.954542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [457.954879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [457.955194] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [457.955490] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [457.955785] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [457.956268] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [457.956624] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [457.957003] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [457.957266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [457.957516] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [457.957766] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [457.958092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [457.958331] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [457.958558] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [457.958778] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [457.959043] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [457.959244] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [457.959440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [457.959629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [457.959818] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [457.960034] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [457.960380] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [457.960584] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [457.960826] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [457.961100] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [457.961330] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [457.961548] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [457.961760] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [457.962061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [457.962316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [457.962548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [457.962782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [457.963037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [457.963284] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [457.963502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [457.963963] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [457.964155] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [458.013019] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [458.170125] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [458.170541] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [458.181245] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [458.181689] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [458.181649] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [458.182176] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [458.182670] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [458.233300] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [458.233639] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [458.233710] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [458.234127] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [458.234872] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [458.234824] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [458.235236] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [458.235579] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [458.235832] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [458.236046] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [458.235737] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [458.236254] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [458.236497] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [458.236707] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [458.236921] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [458.237135] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [458.237322] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [458.237496] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [458.237673] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [458.237930] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [458.238119] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [458.238299] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [458.238564] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [458.238769] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [458.239021] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [458.239478] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [458.239823] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [458.240122] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [458.240360] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [458.240652] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [458.268018] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [458.274637] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [458.275301] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [458.275889] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [458.276939] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [458.279039] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [458.289241] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [458.299055] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [458.338708] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [458.340175] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [458.413934] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [458.417427] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [458.502143] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (232 ms remaining)

<7> [458.737791] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [458.748500] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [458.749817] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [458.757790] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [458.764145] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [458.792587] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<7> [458.796796] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker.

<6> [458.858430] xe 0000:00:02.0: Found custom settings in configfs

<6> [458.858500] xe 0000:00:02.0: vgaarb: deactivate vga console

<7> [458.859883] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error

<6> [458.860387] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [458.860398] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [458.860493] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [458.860576] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [458.861723] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [458.861882] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [458.861993] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [458.862108] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [458.862235] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [458.862313] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [458.862385] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [458.862456] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [458.862526] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [458.862623] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [458.862718] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [458.862818] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [458.862913] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [458.863006] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [458.863104] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [458.863224] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [458.863342] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [458.863458] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [458.863569] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [458.863685] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [458.863796] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [458.863908] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [458.864018] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [458.864128] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [458.864238] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [458.864347] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [458.864457] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [458.864566] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [458.864680] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [458.864790] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [458.864901] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [458.865010] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [458.865119] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [458.865228] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [458.865337] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [458.865447] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [458.865556] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [458.865709] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [458.865819] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [458.865929] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [458.866037] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [458.866145] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [458.866260] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [458.866658] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [458.866822] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [458.866960] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [458.867087] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [458.867211] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [458.867331] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [458.867456] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [458.867571] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [458.868677] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [458.868835] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [458.868958] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [458.869076] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [458.869192] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [458.869312] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [458.869428] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [458.869534] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [458.869657] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [458.869773] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [458.869895] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [458.870008] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [458.870118] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [458.870227] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [458.870333] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [458.870440] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [458.870544] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [458.870656] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [458.870786] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [458.870927] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [458.871067] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [458.871367] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [458.871487] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [458.871653] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [458.871792] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [458.871969] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [458.872094] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [458.872203] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [458.872314] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [458.872458] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [458.872603] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [458.872767] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [458.872911] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [458.873049] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [458.873189] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [458.873931] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [458.875632] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [458.875813] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [458.875912] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [458.876010] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [458.876106] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [458.876202] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [458.876310] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [458.876408] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [458.876502] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [458.876598] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [458.876715] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [458.876816] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [458.876913] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [458.877009] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [458.877078] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [458.877112] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [458.877206] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [458.877252] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [458.877303] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [458.877348] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [458.877398] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [458.877431] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [458.877492] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [458.877508] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [458.877582] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [458.877586] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [458.877670] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [458.877750] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [458.877825] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [458.877826] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [458.877898] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [458.877921] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [458.877970] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [458.878023] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [458.878041] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [458.878111] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [458.878117] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [458.878181] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [458.878211] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [458.878307] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [458.878405] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [458.878500] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [458.878595] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [458.878698] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [458.885243] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<7> [458.890220] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [458.890327] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [458.890420] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<6> [458.890476] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [458.890540] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [458.890794] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [458.890923] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [458.891014] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [458.891098] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [458.891190] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [458.891276] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [458.891359] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [458.891436] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [458.891512] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [458.891588] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [458.891690] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [458.891798] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [458.891887] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [458.891972] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [458.892047] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [458.892115] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [458.892225] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [458.892334] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [458.893644] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [458.893731] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [458.893840] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [458.903681] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [458.903831] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [458.903912] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [459.141651] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [459.153631] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [459.177603] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [459.213584] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [459.225572] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [459.285576] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [459.633481] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [459.633494] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [459.633497] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [459.633498] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [459.633501] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [459.633502] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [459.633504] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [459.633506] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [459.633507] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [459.633509] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [459.633556] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [459.633557] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [459.633558] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [459.633577] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [459.633666] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [459.645462] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [459.657468] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [459.657569] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [459.657656] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [459.657737] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [459.657822] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [459.657995] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [459.658070] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [459.658143] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [459.658213] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [459.658275] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [459.658369] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [459.658601] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [459.658731] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [459.658854] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [459.659319] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [459.659464] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [459.659579] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [459.659820] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [459.659921] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [459.660010] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [459.660329] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [459.660423] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [459.660533] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [459.660619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [459.660691] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [459.660762] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [459.660827] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [459.660890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [459.660952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [459.661014] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [459.661075] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [459.661136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [459.661198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [459.661268] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [459.661337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [459.661403] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [459.661476] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [459.661542] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [459.661609] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [459.661674] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [459.661736] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [459.661799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [459.661860] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [459.661922] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [459.661985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [459.662047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [459.662109] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [459.662173] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [459.662235] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [459.662300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [459.662366] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [459.662429] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [459.662511] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [459.662573] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [459.662641] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [459.662715] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [459.662789] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [459.662873] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [459.662977] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [459.663080] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [459.663179] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [459.663263] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [459.663340] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [459.663413] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [459.663513] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [459.663579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [459.663648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [459.663716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [459.663781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [459.663843] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [459.663916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [459.663989] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [459.664059] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [459.664128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [459.664196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [459.664258] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [459.664312] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [459.664366] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [459.664425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [459.664510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [459.664571] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [459.664634] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [459.664698] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [459.664759] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [459.664819] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [459.664878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [459.664936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [459.664990] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [459.665044] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [459.665103] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [459.665162] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [459.665219] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [459.665275] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [459.665359] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [459.665455] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [459.665880] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [459.665999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [459.666085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [459.666160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [459.666235] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [459.667704] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [459.669969] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [459.670055] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [459.670112] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [459.670165] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [459.670212] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [459.670259] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [459.670305] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [459.670350] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [459.670396] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [459.670449] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [459.670494] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [459.670542] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [459.670599] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [459.670647] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [459.670692] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [459.670769] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [459.681598] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [459.682252] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [459.682330] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [459.682384] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [459.682446] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [459.682495] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [459.682549] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [460.199370] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [460.199376] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [460.199377] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [460.199524] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [460.199617] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [460.199696] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [460.199761] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [460.199868] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [460.199962] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [460.200068] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [460.200126] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [460.200192] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [460.200257] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [460.201249] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [460.201339] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [460.201419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [460.201480] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [460.201541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [460.201600] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [460.201656] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [460.201716] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [460.201773] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [460.201828] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [460.201884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [460.201939] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [460.201993] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [460.202046] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [460.202099] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [460.202152] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [460.202204] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [460.202256] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [460.202312] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [460.202364] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [460.202426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [460.202479] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [460.202535] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [460.202587] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [460.202639] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [460.202690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [460.202747] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [460.202805] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [460.202861] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [460.202919] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [460.202974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [460.203029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [460.203086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [460.203143] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [460.203200] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [460.203257] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [460.203321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [460.203382] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [460.203441] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [460.203503] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [460.203699] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [460.203764] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [460.203824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [460.203883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [460.204026] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [460.204088] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [460.204147] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [460.204199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [460.204332] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [460.204388] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [460.204443] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [460.204505] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [460.204562] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [460.204614] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [460.204666] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [460.204942] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [460.205037] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [460.205087] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [460.205135] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [460.205182] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [460.205229] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [460.205275] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [460.205335] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [460.205382] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [460.205429] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [460.205480] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [460.205528] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [460.205573] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [460.205617] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [460.205661] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [460.205725] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [460.205791] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [460.206205] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [460.208681] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [460.226597] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [460.237748] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [460.238104] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [460.239169] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [460.239256] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [460.239333] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [460.239389] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [460.239444] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [460.239498] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [460.239552] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [460.239607] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [460.239665] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [460.241760] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [460.241843] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [460.241904] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [460.243278] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [460.243385] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [460.245894] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [460.249769] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [460.249878] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [460.249980] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [460.250062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [460.250142] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [460.250223] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [460.250328] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [460.250410] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [460.250490] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [460.250569] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [460.250648] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [460.250727] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [460.250805] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [460.250883] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [460.251576] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [460.253359] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [460.254504] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [460.254625] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [460.254770] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [460.276404] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [460.276940] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [460.277139] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [460.277329] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [460.277485] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [460.277637] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [460.277828] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [460.278027] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [460.278033] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [460.278038] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [460.278043] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [460.278048] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [460.278053] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [460.278057] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [460.278061] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [460.278067] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [460.278072] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [460.278422] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [460.278651] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [460.278889] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [460.279109] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [460.279340] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [460.279572] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [460.279777] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [460.279986] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [460.280203] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [460.280474] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [460.280948] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [460.281139] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [460.281356] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [460.281562] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [460.281768] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [460.281953] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [460.282140] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [460.282346] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [460.282529] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [460.282753] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [460.283051] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [460.284862] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [460.285039] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [460.285187] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [460.285362] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [460.285501] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [460.285640] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [460.285770] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [460.285908] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [460.286035] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [460.286158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [460.286297] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [460.286423] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [460.286546] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [460.286663] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [460.286776] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [460.286904] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [460.287032] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [460.287146] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [460.287253] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [460.287395] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [460.287517] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [460.287642] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [460.287754] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [460.287855] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [460.287955] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [460.288051] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [460.288142] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [460.288242] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [460.288379] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [460.288490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [460.288593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [460.288691] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [460.288785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [460.288880] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [460.288972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [460.289064] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [460.289155] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [460.289245] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [460.289369] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [460.289454] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [460.290136] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [460.290221] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [460.290325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [460.290406] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [460.290482] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [460.290558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [460.290631] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [460.290704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [460.290777] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [460.290851] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [460.290926] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [460.290997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [460.291629] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [460.291752] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [460.291854] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [460.292623] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [460.292743] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [460.292809] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [460.292871] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [460.292931] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [460.292987] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [460.293043] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [460.293098] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [460.293152] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [460.293205] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [460.293258] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [460.293337] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [460.293391] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [460.293446] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [460.293503] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [460.293576] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [460.293657] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [460.295432] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [460.326647] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [460.347410] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [460.347936] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [460.350316] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [460.350684] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [460.356620] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [460.356912] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [460.361243] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [460.361556] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [460.407449] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [460.408691] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [460.408925] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [460.409136] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [460.409367] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [460.409711] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [460.409916] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [460.410087] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [460.410696] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [460.410965] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [460.411219] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [460.411538] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [460.411798] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [460.412058] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [460.412339] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [460.412626] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [460.412905] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [460.413177] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [460.413545] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [460.413836] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [460.414158] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [460.414463] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [460.414779] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [460.415389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [460.415699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [460.415977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [460.416266] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [460.416569] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [460.416931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [460.417209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [460.417532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [460.418026] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [460.418345] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [460.418697] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [460.419001] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [460.431292] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [460.432896] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [460.433046] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [460.433446] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [460.434198] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [460.434250] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [460.434718] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [460.435619] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [460.435679] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [460.436239] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [460.436889] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [460.436926] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [460.437399] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [460.438017] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [460.438051] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [460.438058] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [460.448679] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [460.452226] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17

<7> [460.452929] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [460.453062] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [460.453817] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [460.455089] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [460.455662] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [460.455735] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [460.455812] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [460.455890] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [460.456083] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [460.456286] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [460.456414] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [460.456516] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [460.456640] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [460.456736] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [460.456819] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [460.456922] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [460.457000] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [460.457163] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [460.457179] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [460.457195] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [460.458054] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [460.458380] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [460.458494] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [460.458599] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [460.458731] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [460.458740] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.458743] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.458745] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [460.458748] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [460.458751] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.458753] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [460.458756] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.458758] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [460.458760] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.458785] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [460.458889] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [460.458987] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [460.459465] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [460.459485] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [460.459592] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.459596] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.459598] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.459674] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [460.459680] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [460.459684] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [460.459689] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [460.459695] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [460.459838] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [460.459845] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [460.459849] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [460.459974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [460.459978] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [460.459982] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [460.460107] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [460.460112] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [460.460116] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [460.460119] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [460.460122] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [460.460149] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [460.460169] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [460.460173] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [460.460191] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [460.460280] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [460.460291] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [460.493913] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [460.495166] fbcon: xedrmfb (fb0) is primary device

<7> [460.496085] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [460.496200] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [460.496386] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [460.496519] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [460.496636] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [460.496736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [460.496840] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [460.496966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [460.497111] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [460.497285] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [460.497433] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [460.497579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [460.497722] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [460.497865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [460.498006] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [460.498153] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [460.498326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [460.498470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [460.498613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [460.498757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [460.498921] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [460.499082] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [460.499243] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [460.499402] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [460.499542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [460.499682] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [460.499887] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [460.500036] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [460.500177] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [460.500326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [460.500451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [460.500575] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [460.500695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [460.500817] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [460.500939] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [460.501080] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [460.501245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [460.501371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [460.501495] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [460.501619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [460.501742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [460.501865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [460.501991] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [460.502116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [460.502264] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [460.502391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [460.502518] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [460.502644] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [460.502770] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [460.502899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [460.503029] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [460.503162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [460.503338] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [460.503472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [460.503606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [460.503739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [460.503869] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [460.503998] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [460.504126] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [460.504270] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [460.504397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [460.504523] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [460.504648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [460.504773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [460.504898] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [460.505014] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [460.505129] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [460.505266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [460.505383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [460.505500] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [460.505616] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [460.505732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [460.505849] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [460.506791] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [460.506971] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [460.507136] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [460.507303] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [460.507434] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [460.507561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [460.507686] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [460.507827] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [460.507975] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [460.508082] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [460.508181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [460.508303] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [460.508405] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [460.508505] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [460.508736] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [460.508865] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [460.508964] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [460.509045] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [460.509125] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [460.509229] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [460.509325] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [460.509428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [460.509529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [460.509620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [460.509695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [460.509769] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [460.509842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [460.509914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [460.509986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [460.510057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [460.510129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [460.510200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [460.510302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [460.510398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [460.510494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [460.510574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [460.510646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [460.510718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [460.510790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [460.510861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [460.510931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [460.511001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [460.511070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [460.511139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [460.511208] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [460.511313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [460.511403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [460.511491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [460.511568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [460.511642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [460.511708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [460.511775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [460.511842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [460.511908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [460.511975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [460.512041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [460.512108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [460.512175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [460.512258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [460.512344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [460.512429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [460.512514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [460.512582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [460.512647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [460.512712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [460.512776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [460.512841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [460.512905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [460.512970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [460.513034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [460.513099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [460.513163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [460.513232] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [460.513315] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [460.513401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [460.513489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [460.513567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [460.513635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [460.513704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<6> [460.513753] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [460.513772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [460.513850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [460.513920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [460.513969] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [460.513989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [460.514058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [460.514123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [460.514189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [460.514287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [460.514571] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [460.514946] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [460.515028] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [460.515101] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [460.515177] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [460.515261] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [460.515349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [460.515435] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [460.515521] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [460.515601] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [460.515666] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [460.515729] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [460.515790] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [460.515852] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [460.515912] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [460.515972] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [460.516029] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [460.516100] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [460.516236] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [460.516315] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [460.516424] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [460.516520] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [460.517418] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [460.517508] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [460.517595] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [460.527305] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [460.527443] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [460.527559] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [460.536534] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [460.737979] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [460.739784] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [460.740873] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [460.741741] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [460.742900] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [460.743923] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [460.745050] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [460.745430] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [460.746871] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [460.747222] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [460.748047] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [460.748551] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [460.748933] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [460.749416] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [460.765434] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [460.767206] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [460.767717] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [460.769281] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [460.771618] Console: switching to colour frame buffer device 180x56

<6> [460.821324] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [460.821352] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [460.821898] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [460.822467] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [460.822970] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [460.823493] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [460.823944] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [460.824452] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [460.824916] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [460.825364] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [460.825807] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [460.826219] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [460.826608] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [460.826959] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [460.827318] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [460.827639] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [460.827958] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [460.828293] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [460.828583] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [460.828850] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [460.829103] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [460.829404] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [460.829638] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [460.830869] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [460.831087] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [460.831395] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [460.831680] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [460.831953] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [460.832228] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [460.832464] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [460.832699] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [460.832919] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [460.838058] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [460.839947] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [460.840329] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [460.840640] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [460.840968] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [460.841316] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [460.841621] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [460.841936] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [460.865682] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [460.865717] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [460.866609] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [460.866645] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [460.867690] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [460.868275] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [460.868659] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [460.869015] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [460.869767] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [460.869787] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.869795] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.869799] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [460.869810] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [460.869818] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.869825] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [460.869856] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.869861] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [460.869871] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.869957] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [460.870388] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [460.870757] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [460.872275] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.872286] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.872295] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.872516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [460.872555] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [460.872573] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [460.872590] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [460.872607] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [460.873379] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [460.873404] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [460.873425] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [460.873998] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [460.874013] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [460.874025] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [460.874584] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [460.874598] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [460.874613] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [460.874624] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [460.874634] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [460.875049] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [460.875110] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [460.875136] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [460.875245] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [460.883165] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [460.898616] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [460.898645] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [460.898822] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [460.898843] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [460.901269] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [460.902410] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [460.903060] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [460.903511] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [460.903963] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [460.903981] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.903988] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.903992] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [460.904001] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [460.904007] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.904013] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [460.904020] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.904025] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [460.904032] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.904077] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [460.904342] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [460.904584] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [460.905299] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.905306] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [460.905311] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [460.905448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [460.905459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [460.905467] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [460.905478] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [460.905488] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [460.905738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [460.905749] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [460.905757] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [460.906245] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [460.906271] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [460.906292] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [460.906928] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [460.906948] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [460.906964] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [460.906977] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [460.906988] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [460.907093] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [460.907197] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [460.907215] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [460.907284] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [460.915529] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [460.944850] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<6> [460.988934] Console: switching to colour dummy device 80x25

<7> [460.998862] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [460.999031] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [460.999576] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [460.999966] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [461.000747] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [461.001128] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [461.001550] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [461.002031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [461.002570] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [461.003030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [461.003561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [461.003996] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [461.005272] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [461.015477] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [461.021030] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [461.021311] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [461.021530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [461.021733] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [461.021942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [461.022173] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [461.022341] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [461.022509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [461.022669] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [461.022823] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [461.022975] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [461.023146] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [461.023287] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [461.023425] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [461.023557] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [461.023687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [461.023818] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [461.024066] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [461.024450] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [461.024732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [461.025010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [461.025356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [461.025633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [461.025907] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [461.026044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [461.026443] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [461.026580] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [461.026714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [461.026847] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [461.026984] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [461.027124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [461.027228] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [461.027332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [461.027430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [461.027527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [461.027622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [461.027715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [461.027807] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [461.027899] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [461.027988] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [461.028309] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [461.028400] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [461.028516] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [461.028602] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [461.028692] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [461.028775] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [461.028857] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [461.028952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [461.029029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [461.029119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [461.029215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [461.029309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [461.029402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [461.029489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [461.029692] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [461.029779] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [461.233206] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [461.233631] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [461.254135] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [461.254624] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [461.255111] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [461.306387] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [461.306704] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [461.306984] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [461.307952] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [461.308037] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [461.308376] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [461.308824] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [461.309165] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [461.309287] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [461.309430] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [461.309685] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [461.309953] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [461.310330] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [461.310598] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [461.310861] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [461.311157] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [461.311432] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [461.311682] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [461.311929] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [461.312213] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [461.312458] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [461.312790] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [461.313063] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [461.313353] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [461.313832] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [461.314386] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [461.314786] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [461.315220] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [461.315641] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [461.347476] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [461.347972] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [461.348397] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [461.348809] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [461.355488] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [461.361811] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [461.373617] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [461.381341] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [461.427012] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [461.427526] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [461.496375] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [461.498946] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [461.574834] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (232 ms remaining)

<7> [461.808998] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [461.885230] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [461.886051] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [461.894558] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [461.900388] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [461.913105] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<7> [461.919606] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker.

<6> [461.980480] xe 0000:00:02.0: Found custom settings in configfs

<6> [461.980518] xe 0000:00:02.0: vgaarb: deactivate vga console

<7> [461.981975] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error

<6> [461.982397] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [461.982406] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [461.982495] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [461.982565] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [461.983587] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [461.983727] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [461.983840] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [461.983953] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [461.984064] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [461.984146] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [461.984224] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [461.984299] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [461.984361] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [461.984433] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [461.984506] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [461.984599] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [461.984691] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [461.984774] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [461.984868] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [461.984978] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [461.985085] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [461.985181] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [461.985262] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [461.985344] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [461.985426] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [461.985505] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [461.985580] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [461.985651] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [461.985722] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [461.985799] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [461.985897] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [461.985990] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [461.986069] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [461.986147] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [461.986237] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [461.986325] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [461.986411] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [461.986485] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [461.986558] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [461.986625] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [461.986699] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [461.986773] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [461.986865] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [461.986953] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [461.987041] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [461.987127] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [461.987209] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [461.987590] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [461.987691] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [461.987780] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [461.987909] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [461.988006] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [461.988109] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [461.988194] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [461.988273] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [461.988347] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [461.988432] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [461.988507] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [461.988583] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [461.988674] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [461.988766] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [461.988880] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [461.988968] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [461.989055] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [461.989148] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [461.989232] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [461.989308] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [461.989381] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [461.989462] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [461.989545] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [461.989628] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [461.989709] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [461.989780] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [461.989882] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [461.990003] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [461.990129] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [461.990384] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [461.990481] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [461.990623] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [461.990727] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [461.990871] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [461.991000] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [461.991101] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [461.991197] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [461.991298] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [461.991405] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [461.991514] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [461.991646] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [461.991757] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [461.991874] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [461.992346] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [461.993509] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [461.993620] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [461.993696] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [461.993769] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [461.993856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [461.993956] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [461.994067] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [461.994155] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [461.994230] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [461.994306] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [461.994382] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [461.994459] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [461.994529] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [461.994598] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [461.994675] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [461.994748] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [461.994831] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [461.994921] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [461.995010] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [461.995100] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [461.995176] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [461.995268] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [461.995365] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [461.995456] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [461.995526] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [461.995596] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [461.995665] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [461.995740] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [461.995818] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [461.995902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [461.996408] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [461.996522] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [461.996590] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [461.996652] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [461.996713] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [461.996774] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [461.996860] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [461.996934] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [461.997004] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [461.997074] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [461.997143] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [461.997202] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [461.997257] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [461.997311] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [462.007361] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<6> [462.008735] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [462.013638] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [462.013744] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [462.013839] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [462.013969] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [462.014116] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [462.014237] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [462.014331] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [462.014421] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [462.014515] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [462.014601] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [462.014686] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [462.014770] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [462.014874] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [462.014978] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [462.015087] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [462.015191] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [462.015273] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [462.015353] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [462.015430] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [462.015507] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [462.015615] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [462.015721] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [462.016824] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [462.016906] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [462.017016] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [462.026854] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [462.027007] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [462.027106] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [462.268816] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [462.280792] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [462.304774] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [462.340744] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [462.352738] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [462.413741] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [462.761639] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [462.761654] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [462.761657] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [462.761658] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [462.761661] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [462.761663] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [462.761665] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [462.761667] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [462.761668] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [462.761671] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [462.761730] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [462.761731] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [462.761732] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [462.761754] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [462.761863] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [462.773648] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [462.785620] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [462.785726] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [462.785816] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [462.785899] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [462.785984] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [462.786169] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [462.786249] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [462.786324] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [462.786398] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [462.786464] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [462.786561] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [462.786809] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [462.786950] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [462.787074] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [462.787621] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [462.787737] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [462.787832] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [462.788057] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [462.788160] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [462.788248] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [462.788566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [462.788673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [462.788774] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [462.788840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [462.788906] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [462.788971] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [462.789035] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [462.789098] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [462.789161] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [462.789227] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [462.789294] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [462.789363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [462.789431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [462.789499] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [462.789567] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [462.789645] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [462.789708] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [462.789770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [462.789831] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [462.789892] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [462.789952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [462.790013] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [462.790074] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [462.790132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [462.790188] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [462.790242] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [462.790297] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [462.790355] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [462.790415] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [462.790474] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [462.790533] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [462.790595] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [462.790656] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [462.790726] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [462.790788] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [462.790845] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [462.790902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [462.790967] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [462.791044] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [462.791115] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [462.791188] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [462.791268] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [462.791350] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [462.791425] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [462.791504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [462.791575] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [462.791655] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [462.791719] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [462.791778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [462.791837] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [462.791896] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [462.791955] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [462.792013] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [462.792070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [462.792128] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [462.792186] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [462.792245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [462.792304] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [462.792363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [462.792425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [462.792488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [462.792550] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [462.792625] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [462.792681] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [462.792740] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [462.792796] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [462.792853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [462.792912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [462.792975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [462.793041] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [462.793104] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [462.793164] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [462.793217] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [462.793294] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [462.793370] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [462.793462] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [462.793565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [462.793652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [462.793741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [462.793819] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [462.795294] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [462.797569] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [462.797671] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [462.797734] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [462.797783] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [462.797830] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [462.797876] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [462.797922] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [462.797968] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [462.798013] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [462.798058] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [462.798103] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [462.798148] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [462.798192] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [462.798236] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [462.798282] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [462.798358] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [462.809758] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [462.810449] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [462.810530] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [462.810600] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [462.810648] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [462.810696] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [462.810748] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [463.333921] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [463.333926] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [463.333927] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [463.334118] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [463.334214] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [463.334302] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [463.334372] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [463.334516] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [463.334645] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [463.334791] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [463.334867] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [463.334939] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [463.335005] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [463.336033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [463.336122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [463.336198] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [463.336266] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [463.336330] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [463.336394] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [463.336465] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [463.336532] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [463.336608] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [463.336676] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [463.336732] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [463.336787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [463.336842] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [463.336896] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [463.336950] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [463.337004] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [463.337062] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [463.337124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [463.337184] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [463.337244] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [463.337304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [463.337363] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [463.337421] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [463.337501] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [463.337553] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [463.337605] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [463.337665] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [463.337725] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [463.337782] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [463.337840] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [463.337895] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [463.337950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [463.338008] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [463.338066] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [463.338123] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [463.338179] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [463.338235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [463.338294] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [463.338352] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [463.338408] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [463.338619] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [463.338682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [463.338742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [463.338800] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [463.338943] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [463.338997] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [463.339049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [463.339100] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [463.339228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [463.339283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [463.339336] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [463.339389] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [463.339446] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [463.339497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [463.339554] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [463.339856] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [463.339945] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [463.339993] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [463.340040] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [463.340086] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [463.340132] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [463.340178] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [463.340223] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [463.340267] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [463.340312] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [463.340355] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [463.340399] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [463.340451] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [463.340495] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [463.340540] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [463.340620] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [463.340695] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [463.341076] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [463.342973] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [463.361225] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [463.372262] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [463.372623] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [463.373611] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [463.373705] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [463.373766] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [463.373821] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [463.373879] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [463.373936] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [463.373991] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [463.374046] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [463.374105] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [463.376067] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [463.376154] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [463.376215] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [463.377370] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [463.377476] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [463.380193] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [463.383691] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [463.383774] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [463.383826] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [463.383875] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [463.383922] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [463.383969] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [463.384015] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [463.384060] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [463.384106] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [463.384151] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [463.384196] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [463.384240] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [463.384285] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [463.384329] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [463.384753] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [463.385993] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [463.386918] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [463.387005] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [463.387092] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [463.408737] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [463.409292] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [463.409538] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [463.409702] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [463.409852] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [463.410028] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [463.410197] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [463.410350] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [463.410354] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [463.410358] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [463.410361] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [463.410365] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [463.410369] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [463.410372] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [463.410376] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [463.410380] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [463.410384] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [463.410749] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [463.410950] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [463.411159] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [463.411349] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [463.411579] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [463.411766] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [463.411988] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [463.412181] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [463.412387] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [463.412616] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [463.413067] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [463.413215] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [463.413381] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [463.413575] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [463.413738] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [463.413917] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [463.414065] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [463.414215] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [463.414357] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [463.414518] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [463.414754] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [463.416188] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [463.416302] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [463.416423] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [463.416538] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [463.416645] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [463.416755] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [463.416864] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [463.416978] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [463.417079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [463.417187] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [463.417295] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [463.417396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [463.417520] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [463.417616] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [463.417710] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [463.417803] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [463.417894] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [463.417993] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [463.418096] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [463.418198] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [463.418284] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [463.418370] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [463.418470] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [463.418553] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [463.418633] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [463.418712] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [463.418792] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [463.418880] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [463.418969] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [463.419067] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [463.419153] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [463.419238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [463.419317] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [463.419396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [463.419496] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [463.419575] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [463.419653] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [463.419729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [463.419804] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [463.419879] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [463.420539] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [463.420615] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [463.420686] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [463.420757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [463.420827] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [463.420894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [463.420959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [463.421024] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [463.421087] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [463.421150] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [463.421213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [463.421276] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [463.421801] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [463.421867] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [463.421932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [463.422682] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [463.422796] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [463.422853] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [463.422908] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [463.422962] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [463.423014] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [463.423066] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [463.423117] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [463.423168] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [463.423219] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [463.423268] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [463.423317] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [463.423366] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [463.423420] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [463.423468] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [463.423546] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [463.423628] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [463.426005] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [463.446161] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [463.467434] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [463.467934] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [463.469458] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [463.469614] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [463.473231] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [463.473467] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [463.476843] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [463.477045] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [463.522514] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [463.523344] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [463.523628] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [463.523848] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [463.524058] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [463.524449] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [463.524622] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [463.524803] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [463.525344] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [463.525661] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [463.525928] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [463.526235] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [463.526510] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [463.526819] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [463.527079] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [463.527388] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [463.527647] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [463.527883] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [463.528113] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [463.528339] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [463.528605] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [463.528866] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [463.529085] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [463.529653] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [463.529922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [463.530185] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [463.530470] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [463.530744] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [463.531114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [463.531408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [463.531676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [463.532094] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [463.532434] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [463.532731] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [463.533058] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [463.548604] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [463.551023] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [463.551303] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [463.552221] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [463.553532] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [463.553602] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [463.554226] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [463.555220] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [463.555273] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [463.555900] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [463.556857] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [463.556920] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [463.557569] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [463.558509] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [463.558554] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [463.558562] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [463.573285] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [463.578409] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input18

<7> [463.579240] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [463.579472] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [463.580266] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [463.582176] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [463.583309] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [463.583422] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [463.583500] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [463.583574] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [463.583841] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [463.583936] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [463.584121] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [463.584228] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [463.584359] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [463.584468] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [463.584565] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [463.584686] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [463.584780] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [463.585311] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [463.585325] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [463.585338] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [463.585846] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [463.586177] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [463.586285] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [463.586404] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [463.586532] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [463.586538] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [463.586540] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.586541] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [463.586544] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [463.586546] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.586548] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [463.586551] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.586552] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [463.586555] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.586570] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [463.586671] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [463.586770] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [463.587235] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [463.587249] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [463.587326] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [463.587328] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [463.587330] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.587391] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [463.587395] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [463.587399] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [463.587403] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [463.587407] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [463.587536] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [463.587540] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [463.587543] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [463.587663] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [463.587667] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [463.587670] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [463.587788] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [463.587792] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [463.587795] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [463.587798] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [463.587801] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [463.587822] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [463.587837] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [463.587841] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [463.587854] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [463.587922] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [463.587929] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [463.594511] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [463.595727] fbcon: xedrmfb (fb0) is primary device

<7> [463.596445] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [463.596574] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [463.596679] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [463.596779] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [463.596869] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [463.596959] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [463.597040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [463.597116] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [463.597192] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [463.597273] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [463.597355] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [463.597470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [463.597566] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [463.597661] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [463.597756] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [463.597854] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [463.597968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [463.598082] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [463.598198] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [463.598314] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [463.598500] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [463.598632] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [463.598752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [463.598881] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [463.599010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [463.599138] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [463.599271] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [463.599421] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [463.599551] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [463.599681] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [463.599826] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [463.599937] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [463.600020] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [463.600100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [463.600181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [463.600262] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [463.600342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [463.600453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [463.600542] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [463.600630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [463.600715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [463.600798] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [463.600878] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [463.600951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [463.601024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [463.601098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [463.601170] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [463.601241] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [463.601313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [463.601406] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [463.601493] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [463.601579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [463.601665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [463.601751] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [463.601855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [463.602007] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [463.602160] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [463.602313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [463.602488] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [463.602640] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [463.602791] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [463.602943] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [463.603100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [463.603276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [463.603473] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [463.603630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [463.603786] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [463.603940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [463.604094] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [463.604249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [463.604524] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [463.604708] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [463.604871] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [463.605100] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [463.605229] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [463.605373] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [463.605504] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [463.605630] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [463.605753] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [463.605876] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [463.606021] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [463.606210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [463.606408] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [463.606588] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [463.606766] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [463.606940] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [463.607140] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [463.607314] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [463.607547] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [463.607722] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [463.607894] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [463.608063] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [463.608293] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [463.608478] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [463.608673] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [463.608870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [463.609045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [463.609212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [463.609386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [463.609548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [463.609706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [463.609864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [463.610037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [463.610193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [463.610348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [463.610545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [463.610700] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [463.610855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [463.611008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [463.611161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [463.611312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [463.611513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [463.611675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [463.611818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [463.611970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [463.612112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [463.612254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [463.612403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [463.612546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [463.612687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [463.612830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [463.612973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [463.613137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [463.613291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [463.613462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [463.613613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [463.613761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [463.613911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [463.614059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [463.614206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [463.614365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [463.614510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [463.614653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [463.614795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [463.614936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [463.615098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [463.615267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [463.615441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [463.615586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [463.615757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [463.615927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [463.616075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [463.616224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [463.616408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [463.616573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [463.616729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [463.616875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [463.617019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [463.617166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [463.617312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [463.617496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [463.617648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [463.617812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [463.617967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [463.618034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [463.618099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [463.618163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [463.618228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [463.618292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [463.618363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [463.618709] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [463.619427] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [463.619547] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [463.619646] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [463.619737] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [463.619811] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [463.619883] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [463.619954] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [463.620025] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [463.620107] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [463.620188] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [463.620268] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [463.620348] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [463.620444] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [463.620523] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [463.620600] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [463.620671] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [463.620751] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [463.620896] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [463.620957] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [463.621046] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [463.621125] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [463.622038] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [463.622123] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [463.622224] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [463.632433] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [463.632562] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [463.632671] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<6> [463.634157] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [463.634660] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [463.657209] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [463.841028] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [463.843449] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [463.845081] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [463.846690] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [463.848746] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [463.850635] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [463.852485] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [463.853421] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [463.857171] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [463.858031] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [463.859810] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [463.860980] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [463.861607] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [463.862315] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [463.877801] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [463.879948] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [463.881049] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [463.882633] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [463.886255] Console: switching to colour frame buffer device 180x56

<6> [463.933649] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [463.933670] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [463.934212] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [463.934799] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [463.935284] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [463.935727] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [463.936195] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [463.936685] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [463.937166] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [463.937633] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [463.938004] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [463.938425] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [463.938822] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [463.939178] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [463.939640] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [463.939958] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [463.940283] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [463.940597] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [463.940946] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [463.941361] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [463.941706] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [463.942052] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [463.942415] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [463.944238] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [463.944791] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [463.944841] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [463.945295] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [463.945651] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [463.946185] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [463.946025] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [463.946513] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [463.946331] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [463.946924] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [463.947336] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [463.947717] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [463.948088] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [463.951759] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [463.953593] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [463.954303] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [463.955180] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [463.955528] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [463.957677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [463.957724] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [463.957742] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.957753] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [463.957777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [463.957797] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.957811] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [463.957888] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.957899] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [463.957920] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.958181] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [463.958131] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [463.958727] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [463.959080] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [463.959210] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [463.959798] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [463.959825] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [463.961139] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [463.962352] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [463.963424] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<5> [463.968112] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [463.968135] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [463.968149] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [463.968761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [463.968857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [463.968896] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [463.968927] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [463.968954] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [463.969835] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [463.969864] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [463.969881] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [463.970331] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [463.970348] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [463.970361] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [463.970759] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [463.970775] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [463.970791] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [463.970802] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [463.970813] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [463.973971] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [463.974129] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [463.974157] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [463.974473] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [464.031285] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [464.061032] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [464.061059] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [464.061219] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [464.061287] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [464.062139] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [464.062813] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [464.063288] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [464.063704] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [464.064176] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [464.064198] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [464.064209] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [464.064216] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [464.064247] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [464.064261] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [464.064270] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [464.064281] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [464.064288] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [464.064298] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [464.064348] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [464.064732] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [464.065109] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [464.066446] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [464.066457] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [464.066465] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [464.066664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [464.066677] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [464.066690] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [464.066703] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [464.066715] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [464.067123] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [464.067138] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [464.067149] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [464.067580] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [464.067594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [464.067608] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [464.068073] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [464.068087] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [464.068100] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [464.068111] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [464.068122] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [464.068189] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [464.068261] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [464.068277] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [464.068336] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [464.077953] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [464.078500] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [464.081528] Console: switching to colour dummy device 80x25

<7> [464.084850] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [464.085167] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [464.085845] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [464.086145] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [464.086572] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [464.086785] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [464.087290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [464.087980] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [464.088679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [464.089348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [464.089999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [464.091131] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [464.093609] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [464.111031] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [464.113016] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [464.113319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [464.113517] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [464.113708] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [464.113944] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [464.114332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [464.114684] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [464.115041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [464.115448] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [464.115838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [464.116201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [464.116628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [464.117000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [464.117451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [464.117815] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [464.118259] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [464.118626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [464.119028] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [464.119439] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [464.119792] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [464.120349] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [464.120696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [464.121000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [464.121269] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [464.121508] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [464.121744] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [464.121966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [464.122162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [464.122408] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [464.122614] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [464.122863] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [464.123145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [464.123467] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [464.123715] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [464.123957] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [464.124154] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [464.124398] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [464.124643] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [464.124855] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [464.125053] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [464.125558] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [464.125719] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [464.125965] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [464.126220] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [464.126470] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [464.126710] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [464.126970] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [464.127223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [464.127433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [464.127607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [464.127779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [464.127951] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [464.128137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [464.128400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [464.128811] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [464.128984] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [464.336476] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [464.336945] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [464.347735] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [464.348212] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [464.348664] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [464.399833] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [464.400190] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [464.400618] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [464.401321] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [464.401343] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [464.401677] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [464.402008] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [464.402255] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [464.402456] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [464.402391] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [464.402652] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [464.402844] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [464.403042] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [464.403318] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [464.403517] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [464.403714] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [464.403915] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [464.404115] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [464.404363] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [464.404566] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [464.404780] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [464.405084] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [464.405353] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [464.405568] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [464.405999] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [464.406443] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [464.406768] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [464.407026] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [464.407384] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [464.434772] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [464.439762] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [464.441089] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [464.441709] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [464.442263] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [464.442839] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [464.449522] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [464.459812] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [464.498057] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [464.500238] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [464.574774] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [464.577050] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [464.650275] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (250 ms remaining)

<7> [464.904078] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [464.984101] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [464.985004] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [464.991183] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [464.995744] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [465.021582] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<7> [465.029014] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker.

<6> [465.084416] xe 0000:00:02.0: Found custom settings in configfs

<6> [465.084489] xe 0000:00:02.0: vgaarb: deactivate vga console

<7> [465.085914] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error

<6> [465.086488] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [465.086503] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [465.086608] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [465.086694] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [465.088018] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [465.088188] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [465.088296] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [465.088409] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [465.088516] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [465.088596] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [465.088673] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [465.088749] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [465.088824] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [465.088916] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [465.089014] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [465.089123] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [465.089221] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [465.089318] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [465.089419] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [465.089540] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [465.089658] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [465.089775] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [465.089886] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [465.090048] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [465.090166] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [465.090278] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [465.090391] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [465.090503] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [465.090616] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [465.090728] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [465.090840] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [465.090959] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [465.091077] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [465.091189] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [465.091298] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [465.091407] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [465.091516] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [465.091624] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [465.091734] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [465.091845] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [465.091962] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [465.092079] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [465.092192] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [465.092307] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [465.092421] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [465.092534] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [465.092652] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [465.093179] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [465.093315] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [465.093417] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [465.093511] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [465.093599] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [465.093682] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [465.093764] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [465.093848] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [465.093935] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [465.094038] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [465.094143] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [465.094241] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [465.094319] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [465.094400] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [465.094484] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [465.094556] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [465.094627] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [465.094696] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [465.094771] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [465.094842] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [465.094915] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [465.095059] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [465.095160] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [465.095258] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [465.095336] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [465.095407] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [465.095481] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [465.095570] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [465.095668] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [465.095927] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [465.096026] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [465.096174] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [465.096313] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [465.096453] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [465.096545] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [465.096622] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [465.096698] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [465.096797] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [465.096902] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [465.097032] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [465.097159] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [465.097285] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [465.097394] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [465.097805] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [465.098373] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [465.098462] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [465.098542] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [465.098619] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [465.098695] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [465.098770] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [465.098851] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [465.098929] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [465.099017] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [465.099108] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [465.099198] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [465.099277] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [465.099354] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [465.099432] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [465.099517] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [465.099594] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [465.099671] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [465.099747] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [465.099824] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [465.099901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [465.100032] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [465.100131] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [465.100236] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [465.100327] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [465.100407] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [465.100486] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [465.100565] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [465.100646] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [465.100729] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [465.100812] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [465.102193] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [465.102358] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [465.102513] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [465.102580] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [465.102643] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [465.102705] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [465.102765] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [465.102824] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [465.102883] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [465.102960] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [465.103036] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [465.103111] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [465.103186] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [465.103253] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<6> [465.112599] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [465.120438] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<7> [465.128639] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [465.128737] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [465.128822] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [465.128936] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [465.129052] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [465.129156] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [465.129248] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [465.129326] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [465.129407] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [465.129486] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [465.129564] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [465.129639] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [465.129712] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [465.129785] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [465.129863] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [465.129956] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [465.130036] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [465.130119] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [465.130203] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [465.130282] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [465.130377] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [465.130467] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [465.131764] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [465.131833] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [465.131931] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [465.141962] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [465.142254] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [465.142477] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [465.380906] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [465.392892] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [465.416869] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [465.452840] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [465.464833] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [465.524831] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [465.873725] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [465.873739] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [465.873741] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [465.873743] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [465.873746] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [465.873749] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [465.873751] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [465.873753] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [465.873754] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [465.873756] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [465.873813] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [465.873815] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [465.873816] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [465.873833] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [465.873925] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [465.885702] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [465.897708] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [465.897805] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [465.897891] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [465.897976] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [465.898064] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [465.898256] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [465.898331] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [465.898403] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [465.898474] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [465.898539] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [465.898633] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [465.898873] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [465.899013] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [465.899140] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [465.899587] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [465.899700] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [465.899797] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [465.900045] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [465.900146] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [465.900237] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [465.900556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [465.900643] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [465.900739] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [465.900812] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [465.900880] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [465.900945] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [465.901010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [465.901073] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [465.901137] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [465.901200] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [465.901262] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [465.901324] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [465.901388] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [465.901453] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [465.901516] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [465.901580] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [465.901642] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [465.901713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [465.901776] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [465.901842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [465.901903] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [465.901962] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [465.902023] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [465.902080] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [465.902137] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [465.902193] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [465.902249] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [465.902307] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [465.902365] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [465.902426] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [465.902486] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [465.902546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [465.902608] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [465.902663] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [465.902733] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [465.902792] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [465.902853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [465.902914] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [465.902985] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [465.903054] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [465.903127] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [465.903200] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [465.903273] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [465.903342] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [465.903417] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [465.903481] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [465.903545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [465.903607] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [465.903665] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [465.903739] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [465.903800] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [465.903860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [465.903916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [465.903971] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [465.904030] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [465.904088] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [465.904142] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [465.904196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [465.904253] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [465.904310] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [465.904366] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [465.904423] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [465.904478] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [465.904533] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [465.904588] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [465.904642] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [465.904704] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [465.904758] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [465.904817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [465.904878] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [465.904931] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [465.904983] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [465.905037] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [465.905114] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [465.905190] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [465.905282] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [465.905385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [465.905461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [465.905534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [465.905607] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [465.907059] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [465.909342] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [465.909417] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [465.909473] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [465.909524] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [465.909572] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [465.909618] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [465.909664] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [465.909732] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [465.909781] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [465.909831] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [465.909878] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [465.909922] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [465.909967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [465.910012] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [465.910057] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [465.910132] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [465.920790] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [465.921536] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [465.921612] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [465.921680] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [465.921735] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [465.921789] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [465.921838] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [466.443429] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [466.443436] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [466.443437] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [466.443630] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [466.443739] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [466.443835] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [466.443909] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [466.444034] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [466.444140] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [466.444265] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [466.444334] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [466.444407] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [466.444476] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [466.445426] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [466.445487] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [466.445565] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [466.445639] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [466.445701] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [466.445768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [466.445831] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [466.445896] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [466.445956] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [466.446016] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [466.446075] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [466.446131] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [466.446185] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [466.446239] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [466.446292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [466.446344] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [466.446396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [466.446447] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [466.446499] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [466.446565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [466.446622] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [466.446689] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [466.446752] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [466.446809] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [466.446865] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [466.446920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [466.446981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [466.447043] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [466.447102] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [466.447159] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [466.447214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [466.447268] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [466.447324] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [466.447380] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [466.447435] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [466.447490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [466.447555] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [466.447624] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [466.447700] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [466.447774] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [466.447971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [466.448049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [466.448117] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [466.448178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [466.448321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [466.448381] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [466.448440] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [466.448496] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [466.448646] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [466.448720] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [466.448785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [466.448843] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [466.448902] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [466.448959] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [466.449015] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [466.449304] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [466.449396] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [466.449445] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [466.449494] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [466.449557] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [466.449606] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [466.449657] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [466.449718] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [466.449776] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [466.449824] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [466.449872] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [466.449919] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [466.449967] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [466.450015] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [466.450062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [466.450128] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [466.450199] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [466.450608] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [466.452970] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [466.470241] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [466.481297] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [466.481603] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [466.482634] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [466.482723] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [466.482785] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [466.482842] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [466.482901] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [466.482959] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [466.483014] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [466.483072] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [466.483133] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [466.485193] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [466.485280] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [466.485344] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [466.487150] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [466.487235] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [466.489916] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [466.494309] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [466.494448] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [466.494602] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [466.494695] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [466.494786] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [466.494875] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [466.494963] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [466.495052] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [466.495141] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [466.495241] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [466.495347] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [466.495446] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [466.495563] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [466.495650] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [466.496360] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [466.498533] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [466.499926] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [466.500086] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [466.500332] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [466.521824] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [466.522341] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [466.522603] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [466.522776] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [466.522937] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [466.523096] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [466.523255] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [466.523452] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [466.523458] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [466.523464] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [466.523470] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [466.523477] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [466.523482] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [466.523498] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [466.523502] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [466.523506] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [466.523511] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [466.523897] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [466.524126] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [466.524378] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [466.524699] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [466.524953] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [466.525176] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [466.525400] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [466.525658] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [466.525914] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [466.526132] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [466.526670] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [466.526881] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [466.527110] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [466.527333] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [466.527567] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [466.527783] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [466.527999] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [466.528215] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [466.528424] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [466.528673] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [466.528992] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [466.531058] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [466.531225] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [466.531390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [466.531564] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [466.531714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [466.531877] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [466.532020] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [466.532174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [466.532318] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [466.532458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [466.532634] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [466.532775] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [466.532915] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [466.533045] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [466.533172] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [466.533292] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [466.533428] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [466.533587] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [466.533705] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [466.533821] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [466.533938] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [466.534056] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [466.534165] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [466.534289] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [466.534414] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [466.534534] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [466.534634] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [466.534749] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [466.534858] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [466.534968] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [466.535078] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [466.535184] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [466.535285] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [466.535384] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [466.535497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [466.535596] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [466.535695] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [466.535793] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [466.535889] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [466.535980] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [466.536658] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [466.536756] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [466.536843] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [466.536928] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [466.537011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [466.537089] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [466.537167] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [466.537243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [466.537319] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [466.537396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [466.537473] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [466.537573] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [466.538098] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [466.538173] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [466.538245] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [466.539111] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [466.539248] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [466.539311] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [466.539369] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [466.539424] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [466.539478] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [466.539559] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [466.539611] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [466.539663] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [466.539714] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [466.539765] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [466.539815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [466.539865] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [466.539912] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [466.539959] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [466.540042] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [466.540134] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [466.542287] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [466.561556] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [466.583002] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [466.583522] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [466.585412] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [466.585655] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [466.589589] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [466.589785] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [466.593582] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [466.593805] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [466.639606] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [466.640372] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [466.640673] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [466.640887] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [466.641088] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [466.641445] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [466.641697] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [466.641866] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [466.642437] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [466.642785] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [466.643020] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [466.643285] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [466.643515] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [466.643730] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [466.643947] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [466.644166] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [466.644436] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [466.644701] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [466.644924] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [466.645128] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [466.645327] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [466.645543] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [466.645748] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [466.646233] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [466.646502] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [466.646747] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [466.646977] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [466.647199] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [466.647501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [466.647752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [466.647995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [466.648352] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [466.648767] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [466.649389] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [466.649882] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [466.669076] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [466.672693] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [466.673109] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [466.674080] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [466.676515] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [466.676703] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [466.677872] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [466.679386] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [466.679512] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [466.680139] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [466.681242] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [466.681309] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [466.682024] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [466.683277] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [466.683369] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [466.683384] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [466.698279] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [466.701115] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19

<7> [466.702075] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [466.702202] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [466.702576] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [466.704118] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [466.704405] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [466.705218] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [466.705323] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [466.705420] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [466.705536] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [466.705778] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [466.705897] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [466.705989] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [466.706095] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [466.706188] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [466.706278] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [466.706396] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [466.707282] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [466.707517] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [466.707535] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [466.707544] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [466.708063] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [466.708366] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [466.708496] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [466.708589] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [466.708704] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [466.708709] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [466.708711] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [466.708713] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [466.708715] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [466.708718] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [466.708720] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [466.708722] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [466.708724] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [466.708726] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [466.708744] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [466.708849] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [466.708957] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [466.709448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [466.709464] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [466.709558] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [466.709561] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [466.709564] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [466.709619] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [466.709624] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [466.709628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [466.709633] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [466.709638] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [466.709783] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [466.709788] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [466.709792] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [466.709931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [466.709936] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [466.709939] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [466.710076] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [466.710080] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [466.710083] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [466.710087] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [466.710089] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [466.710111] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [466.710128] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [466.710132] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [466.710147] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [466.710224] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [466.710231] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [466.717301] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [466.717834] fbcon: xedrmfb (fb0) is primary device

<7> [466.718481] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [466.718614] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [466.718724] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [466.718844] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [466.718952] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [466.719047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [466.719134] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [466.719218] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [466.719300] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [466.719383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [466.719485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [466.719581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [466.719676] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [466.719770] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [466.719865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [466.719966] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [466.720065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [466.720162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [466.720261] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [466.720359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [466.720470] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [466.720570] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [466.720671] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [466.720773] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [466.720889] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [466.721000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [466.721104] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [466.721206] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [466.721306] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [466.721407] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [466.721526] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [466.721622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [466.721716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [466.721808] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [466.721901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [466.721992] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [466.722083] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [466.722174] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [466.722266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [466.722359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [466.722464] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [466.722556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [466.722647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [466.722738] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [466.722828] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [466.722913] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [466.722986] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [466.723058] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [466.723132] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [466.723204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [466.723276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [466.723347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [466.723418] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [466.723519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [466.723608] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [466.723695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [466.723781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [466.723866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [466.723948] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [466.724023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [466.724098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [466.724174] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [466.724251] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [466.724328] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [466.724405] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [466.724509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [466.724599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [466.724687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [466.724775] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [466.724858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [466.724941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [466.725024] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [466.725108] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [466.725239] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [466.725316] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [466.725395] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [466.725485] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [466.725561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [466.725636] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [466.725713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [466.725789] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [466.725887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [466.725988] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [466.726086] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [466.726182] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [466.726263] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [466.726345] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [466.726431] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [466.726546] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [466.726644] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [466.726741] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [466.726835] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [466.726945] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [466.727026] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [466.727110] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [466.727194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [466.727276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [466.727356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [466.727443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [466.727540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [466.727637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [466.727734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [466.727829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [466.727923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [466.728014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [466.728104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [466.728194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [466.728275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [466.728354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [466.728439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [466.728530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [466.728619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [466.728708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [466.728797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [466.728876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [466.728949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [466.729022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [466.729096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [466.729171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [466.729259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [466.729350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [466.729514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [466.729604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [466.729691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [466.729778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [466.729866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [466.729953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [466.730040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [466.730127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [466.730213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [466.730302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [466.730388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [466.730490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [466.730577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [466.730663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [466.730749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [466.730835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [466.730931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [466.731022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [466.731111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [466.731200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [466.731290] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [466.731389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [466.731507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [466.731598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [466.731686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [466.731763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [466.731836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [466.731908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [466.731980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [466.732052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [466.732124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [466.732196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [466.732270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [466.732343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [466.732415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [466.732519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [466.732605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [466.732690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [466.732775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [466.733024] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [466.733147] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [466.733254] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [466.733347] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [466.733458] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [466.733545] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [466.733631] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [466.733714] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [466.733795] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [466.733877] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [466.733957] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [466.734036] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [466.734113] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [466.734190] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [466.734263] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [466.734327] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [466.734390] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [466.734485] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [466.734644] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [466.734721] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [466.734825] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [466.734905] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [466.735810] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [466.735883] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [466.735969] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [466.745453] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<6> [466.745555] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [466.745551] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [466.745655] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [466.745835] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [466.768537] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [466.957783] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [466.960012] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [466.961229] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [466.962236] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [466.964652] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [466.965943] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [466.967164] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [466.967605] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [466.969235] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [466.969840] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [466.970837] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [466.971429] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [466.971864] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [466.972366] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [466.988324] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [466.990136] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [466.990600] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [466.991953] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [466.994163] Console: switching to colour frame buffer device 180x56

<6> [467.043347] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [467.043370] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [467.043853] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [467.044348] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [467.044783] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [467.045202] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [467.045719] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [467.046143] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [467.046618] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [467.046991] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [467.047386] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [467.047738] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [467.048091] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [467.048502] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [467.048868] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [467.049189] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [467.049536] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [467.049866] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [467.050154] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [467.050473] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [467.050791] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [467.051058] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [467.051310] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [467.053137] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [467.053311] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [467.053564] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [467.053780] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [467.053984] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [467.054176] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [467.054368] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [467.054550] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [467.054723] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [467.058310] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [467.059416] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [467.059547] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [467.059673] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [467.059793] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [467.059911] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [467.060027] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [467.060143] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [467.088612] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [467.088666] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [467.090178] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [467.090233] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [467.092147] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [467.093086] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [467.093713] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [467.094237] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [467.095221] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [467.095245] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [467.095255] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.095261] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [467.095274] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [467.095283] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.095291] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [467.095334] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.095342] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [467.095353] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.095439] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [467.095815] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [467.096193] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [467.097504] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [467.097514] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [467.097519] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.097679] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [467.097706] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [467.097718] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [467.097730] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [467.097742] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [467.098434] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [467.098461] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [467.098479] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [467.098966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [467.098975] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [467.098985] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [467.099300] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [467.099319] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [467.099327] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [467.099333] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [467.099338] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [467.099631] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [467.099674] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [467.099682] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [467.099759] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [467.106086] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [467.121493] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [467.121515] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [467.121643] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [467.121661] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [467.122542] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [467.123228] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [467.123691] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [467.124120] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [467.124729] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [467.124748] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [467.124756] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.124761] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [467.124773] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [467.124782] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.124789] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [467.124799] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.124805] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [467.124815] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.124863] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [467.125261] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [467.125657] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [467.126514] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [467.126521] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [467.126527] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [467.126676] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [467.126688] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [467.126702] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [467.126714] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [467.126724] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [467.127106] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [467.127120] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [467.127129] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [467.127603] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [467.127615] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [467.127623] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [467.127964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [467.127972] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [467.127979] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [467.127985] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [467.127991] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [467.128032] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [467.128058] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [467.128064] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [467.128100] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [467.155360] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [467.178032] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<6> [467.211249] Console: switching to colour dummy device 80x25

<7> [467.221692] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [467.221839] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [467.222211] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [467.222618] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [467.222931] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [467.223325] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [467.223713] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [467.224190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [467.225042] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [467.225553] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [467.226032] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [467.226472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [467.227668] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [467.238340] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [467.243547] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [467.244047] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [467.244607] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [467.245107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [467.245603] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [467.246039] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [467.246512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [467.246930] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [467.247335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [467.247757] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [467.248133] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [467.248593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [467.248973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [467.249342] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [467.249690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [467.250037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [467.250413] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [467.250813] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [467.251153] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [467.251604] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [467.251999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [467.252498] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [467.252864] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [467.253193] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [467.253647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [467.254010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [467.254527] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [467.254870] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [467.255196] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [467.255633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [467.255928] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [467.256220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [467.256569] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [467.256845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [467.257109] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [467.257409] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [467.257732] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [467.257997] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [467.258300] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [467.258571] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [467.259015] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [467.259283] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [467.259610] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [467.259886] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [467.260204] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [467.260550] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [467.260875] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [467.261212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [467.261569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [467.261874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [467.262137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [467.262432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [467.262662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [467.262884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [467.263418] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [467.263623] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [467.471326] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [467.471734] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [467.492126] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [467.492502] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [467.492795] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [467.544967] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [467.546023] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [467.553254] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [467.554281] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [467.554355] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [467.555741] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [467.556287] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [467.556823] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [467.557201] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [467.557524] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [467.557845] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [467.558205] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [467.558578] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [467.558885] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [467.559191] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [467.559476] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [467.559819] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [467.560145] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [467.560522] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [467.560807] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [467.561078] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [467.561490] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [467.561822] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [467.562093] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [467.562641] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [467.563074] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [467.563533] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [467.563831] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [467.564229] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [467.585351] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [467.585880] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [467.586348] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [467.586840] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [467.597988] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [467.604430] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [467.612376] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [467.622528] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [467.660567] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [467.661521] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [467.736950] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [467.742951] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [467.806859] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (247 ms remaining)

<7> [468.063298] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [468.113335] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [468.114102] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [468.119870] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [468.124869] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [468.141880] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<7> [468.148586] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker.

<6> [468.207866] xe 0000:00:02.0: Found custom settings in configfs

<6> [468.207906] xe 0000:00:02.0: vgaarb: deactivate vga console

<7> [468.208792] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error

<6> [468.209209] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [468.209220] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [468.209309] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [468.209391] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [468.210404] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [468.210527] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [468.210618] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [468.210710] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [468.210794] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [468.210856] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [468.210915] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [468.211000] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [468.211075] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [468.211170] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [468.211259] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [468.211368] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [468.211456] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [468.211551] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [468.211638] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [468.211729] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [468.211812] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [468.211892] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [468.211977] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [468.212073] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [468.212170] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [468.212264] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [468.212341] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [468.212414] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [468.212485] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [468.212557] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [468.212628] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [468.212699] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [468.212770] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [468.212840] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [468.212911] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [468.212989] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [468.213083] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [468.213176] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [468.213271] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [468.213345] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [468.213422] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [468.213498] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [468.213575] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [468.213651] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [468.213722] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [468.213792] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [468.213867] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [468.214228] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [468.214347] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [468.214449] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [468.214539] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [468.214620] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [468.214692] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [468.214767] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [468.214838] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [468.214907] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [468.214994] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [468.215089] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [468.215182] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [468.215272] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [468.215346] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [468.215419] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [468.215487] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [468.215554] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [468.215622] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [468.215696] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [468.215769] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [468.215846] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [468.215923] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [468.216273] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [468.216377] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [468.216450] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [468.216517] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [468.216592] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [468.216777] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [468.216876] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [468.217142] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [468.217255] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [468.217378] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [468.217494] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [468.217633] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [468.217722] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [468.217795] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [468.217869] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [468.217979] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [468.218106] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [468.218232] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [468.218355] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [468.218471] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [468.218584] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [468.219018] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [468.219718] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [468.219817] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [468.219892] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [468.219973] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [468.220068] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [468.220161] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [468.220262] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [468.220334] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [468.220403] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [468.220472] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [468.220541] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [468.220609] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [468.220677] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [468.220744] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [468.220818] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [468.220884] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [468.220951] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [468.221054] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [468.221142] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [468.221229] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [468.221304] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [468.221373] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [468.221448] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [468.221517] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [468.221586] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [468.221655] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [468.221722] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [468.221793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [468.221866] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [468.221938] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [468.222487] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [468.222601] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [468.222663] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [468.222721] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [468.222777] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [468.222832] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [468.222885] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [468.222937] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [468.223011] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [468.223079] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [468.223146] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [468.223213] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [468.223275] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [468.223330] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [468.231842] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<6> [468.235111] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [468.236722] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [468.236827] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [468.236919] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [468.237050] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [468.237183] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [468.237304] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [468.237413] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [468.237518] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [468.237627] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [468.237725] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [468.237828] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [468.237930] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [468.238042] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [468.238141] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [468.238242] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [468.238351] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [468.238427] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [468.238493] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [468.238556] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [468.238619] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [468.238711] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [468.238800] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [468.239964] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [468.240051] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [468.240159] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [468.250539] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [468.250662] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [468.250735] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [468.491954] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [468.503946] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [468.527912] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [468.563880] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [468.575871] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [468.635874] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [468.983757] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [468.983770] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [468.983773] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [468.983774] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [468.983777] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [468.983779] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [468.983780] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [468.983783] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [468.983784] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [468.983786] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [468.983843] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [468.983844] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [468.983845] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [468.983867] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [468.983953] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [468.995734] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [469.007734] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [469.007839] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [469.007932] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [469.008023] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [469.008109] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [469.008295] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [469.008371] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [469.008444] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [469.008515] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [469.008586] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [469.008679] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [469.008933] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [469.009076] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [469.009194] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [469.009700] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [469.009828] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [469.009926] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [469.010143] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [469.010244] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [469.010331] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [469.010656] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [469.010753] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [469.010849] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [469.010936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [469.011005] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [469.011070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [469.011134] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [469.011196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [469.011259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [469.011321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [469.011383] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [469.011445] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [469.011506] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [469.011566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [469.011627] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [469.011687] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [469.011757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [469.011828] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [469.011909] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [469.011974] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [469.012037] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [469.012099] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [469.012162] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [469.012219] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [469.012276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [469.012332] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [469.012388] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [469.012446] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [469.012502] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [469.012557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [469.012611] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [469.012667] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [469.012733] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [469.012790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [469.012866] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [469.012938] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [469.013002] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [469.013065] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [469.013136] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [469.013212] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [469.013291] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [469.013370] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [469.013448] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [469.013522] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [469.013600] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [469.013661] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [469.013728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [469.013790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [469.013853] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [469.013924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [469.013984] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [469.014042] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [469.014100] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [469.014156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [469.014212] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [469.014268] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [469.014322] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [469.014377] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [469.014431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [469.014485] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [469.014538] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [469.014592] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [469.014646] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [469.014700] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [469.014772] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [469.014836] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [469.014905] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [469.014966] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [469.015021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [469.015078] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [469.015130] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [469.015182] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [469.015232] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [469.015310] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [469.015392] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [469.015491] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [469.015603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [469.015685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [469.015773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [469.015851] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [469.017361] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [469.019625] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [469.019716] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [469.019766] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [469.019823] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [469.019877] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [469.019924] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [469.019971] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [469.020016] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [469.020062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [469.020107] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [469.020152] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [469.020197] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [469.020242] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [469.020285] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [469.020330] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [469.020406] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [469.031839] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [469.032528] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [469.032608] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [469.032662] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [469.032726] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [469.032773] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [469.032830] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [469.529018] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [469.529024] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [469.529026] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [469.529174] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [469.529267] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [469.529346] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [469.529411] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [469.529514] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [469.529639] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [469.529758] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [469.529840] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [469.529927] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [469.529995] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [469.530945] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [469.531012] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [469.531079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [469.531142] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [469.531203] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [469.531265] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [469.531326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [469.531390] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [469.531450] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [469.531508] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [469.531584] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [469.531646] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [469.531702] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [469.531760] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [469.531813] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [469.531866] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [469.531917] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [469.531969] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [469.532021] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [469.532072] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [469.532125] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [469.532177] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [469.532229] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [469.532281] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [469.532333] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [469.532384] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [469.532441] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [469.532500] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [469.532562] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [469.532620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [469.532676] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [469.532739] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [469.532800] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [469.532857] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [469.532913] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [469.532971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [469.533028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [469.533088] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [469.533147] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [469.533205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [469.533390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [469.533453] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [469.533514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [469.533585] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [469.533720] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [469.533781] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [469.533834] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [469.533885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [469.534011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [469.534065] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [469.534120] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [469.534174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [469.534228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [469.534280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [469.534331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [469.534609] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [469.534704] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [469.534763] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [469.534819] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [469.534866] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [469.534913] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [469.534959] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [469.535005] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [469.535050] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [469.535096] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [469.535140] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [469.535185] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [469.535229] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [469.535273] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [469.535317] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [469.535379] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [469.535448] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [469.535850] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [469.538168] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [469.555538] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [469.566687] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [469.567072] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [469.568124] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [469.568235] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [469.568296] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [469.568350] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [469.568406] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [469.568460] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [469.568513] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [469.568607] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [469.568669] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [469.570674] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [469.570759] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [469.570820] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [469.572628] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [469.572702] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [469.574816] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [469.578294] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [469.578395] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [469.578475] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [469.578574] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [469.578650] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [469.578727] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [469.578803] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [469.578878] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [469.578953] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [469.579027] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [469.579100] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [469.579175] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [469.579245] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [469.579315] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [469.579897] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [469.581433] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [469.582423] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [469.582520] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [469.582651] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [469.603642] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [469.604191] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [469.604378] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [469.604561] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [469.604715] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [469.604867] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [469.605043] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [469.605222] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [469.605227] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [469.605231] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [469.605235] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [469.605240] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [469.605245] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [469.605250] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [469.605255] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [469.605260] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [469.605265] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [469.605632] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [469.605848] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [469.606075] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [469.606283] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [469.606495] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [469.606798] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [469.607034] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [469.607230] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [469.607417] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [469.607639] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [469.608162] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [469.608341] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [469.608543] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [469.608732] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [469.608931] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [469.609107] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [469.609284] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [469.609459] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [469.609655] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [469.609851] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [469.610118] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [469.611721] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [469.611859] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [469.611993] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [469.612122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [469.612240] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [469.612361] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [469.612479] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [469.612629] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [469.612743] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [469.612858] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [469.612977] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [469.613086] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [469.613193] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [469.613300] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [469.613403] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [469.613524] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [469.613632] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [469.613730] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [469.613827] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [469.613924] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [469.614019] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [469.614110] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [469.614200] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [469.614290] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [469.614378] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [469.614466] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [469.614570] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [469.614656] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [469.614743] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [469.614841] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [469.614938] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [469.615029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [469.615118] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [469.615205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [469.615298] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [469.615396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [469.615497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [469.615606] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [469.615687] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [469.615768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [469.616406] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [469.616486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [469.616581] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [469.616660] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [469.616735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [469.616806] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [469.616879] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [469.616950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [469.617019] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [469.617087] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [469.617155] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [469.617222] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [469.617824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [469.617894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [469.617964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [469.618726] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [469.618834] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [469.618893] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [469.618950] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [469.619008] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [469.619062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [469.619116] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [469.619170] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [469.619222] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [469.619273] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [469.619325] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [469.619376] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [469.619425] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [469.619475] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [469.619537] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [469.619609] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [469.619689] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [469.621754] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [469.641312] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [469.662435] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [469.662904] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [469.664536] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [469.664689] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [469.668269] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [469.668451] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [469.672364] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [469.672534] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [469.717574] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [469.719593] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [469.720229] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [469.720852] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [469.721352] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [469.722129] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [469.722515] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [469.722920] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [469.723966] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [469.724512] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [469.725078] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [469.725694] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [469.726190] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [469.726762] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [469.727243] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [469.727775] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [469.728288] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [469.728809] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [469.729320] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [469.729816] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [469.730263] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [469.730668] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [469.731013] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [469.731831] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [469.732204] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [469.732578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [469.732934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [469.733251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [469.733665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [469.733965] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [469.734243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [469.735083] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [469.735359] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [469.735666] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [469.735927] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [469.743776] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [469.745403] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [469.745579] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [469.746008] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [469.746799] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [469.746849] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [469.747345] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [469.748052] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [469.748109] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [469.749181] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [469.749902] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [469.749940] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [469.750362] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [469.750999] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [469.751026] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [469.751031] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [469.760819] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [469.764710] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20

<7> [469.765666] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [469.765815] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [469.766206] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [469.767555] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [469.767797] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [469.767907] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:400:DP-1] status updated from unknown to disconnected (epoch counter 0->1)

<7> [469.767994] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [469.768101] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [469.768198] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:412:DP-2] status updated from unknown to disconnected (epoch counter 0->1)

<7> [469.768291] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [469.768414] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [469.768489] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [469.768588] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [469.768675] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [469.768728] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:420:DP-3] status updated from unknown to disconnected (epoch counter 0->1)

<7> [469.768757] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [469.768837] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [469.768959] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [469.769006] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [469.769011] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [469.769454] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [469.770088] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [469.770199] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [469.770304] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [469.770410] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [469.770414] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [469.770416] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [469.770417] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [469.770420] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [469.770421] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [469.770423] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [469.770425] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [469.770426] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [469.770428] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [469.770446] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [469.770554] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [469.770655] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [469.771167] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [469.771182] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [469.771262] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [469.771264] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [469.771266] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [469.771321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [469.771326] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [469.771330] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [469.771335] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [469.771341] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [469.771497] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [469.771501] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [469.771505] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [469.771631] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [469.771635] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [469.771639] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [469.771757] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [469.771761] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [469.771765] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [469.771768] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [469.771771] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [469.771791] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [469.771806] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [469.771809] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [469.771824] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [469.771890] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [469.771897] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [469.778840] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [469.779367] fbcon: xedrmfb (fb0) is primary device

<7> [469.780167] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [469.780292] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [469.780396] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [469.780502] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [469.780613] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [469.780721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [469.780828] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [469.780933] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [469.781037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [469.781139] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [469.781241] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [469.781341] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [469.781429] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [469.781553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [469.781651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [469.781748] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [469.781845] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [469.781941] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [469.782037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [469.782132] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [469.782229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [469.782310] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [469.782391] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [469.782476] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [469.782571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [469.782664] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [469.782758] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [469.782846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [469.782923] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [469.783006] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [469.783096] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [469.783186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [469.783276] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [469.783365] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [469.783454] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [469.783563] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [469.783651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [469.783740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [469.783829] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [469.783918] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [469.783998] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [469.784084] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [469.784172] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [469.784260] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [469.784348] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [469.784435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [469.784541] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [469.784629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [469.784716] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [469.784802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [469.784890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [469.784967] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [469.785040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [469.785114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [469.785190] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [469.785265] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [469.785339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [469.785414] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [469.785503] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [469.785591] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [469.785680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [469.785768] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [469.785855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [469.785929] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [469.786003] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [469.786076] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [469.786149] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [469.786221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [469.786294] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [469.786367] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [469.786440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [469.786534] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [469.786623] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [469.786763] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [469.786847] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [469.786934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [469.787009] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [469.787088] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [469.787160] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [469.787232] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [469.787302] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [469.787380] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [469.787481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [469.787594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [469.787693] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [469.787791] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [469.787880] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [469.787960] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [469.788063] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [469.788146] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [469.788226] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [469.788305] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [469.788402] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [469.788490] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [469.788588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [469.788686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [469.788782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [469.788879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [469.788961] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [469.789041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [469.789119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [469.789197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [469.789275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [469.789352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [469.789424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [469.789671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [469.789762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [469.789851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [469.789940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [469.790028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [469.790116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [469.790202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [469.790289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [469.790370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [469.790444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [469.790544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [469.790632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [469.790720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [469.790806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [469.790893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [469.790971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [469.791043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [469.791115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [469.791187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [469.791269] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [469.791367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [469.791468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [469.791557] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [469.791641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [469.791728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [469.791818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [469.791907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [469.791996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [469.792079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [469.792152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [469.792226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [469.792300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [469.792373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [469.792446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [469.792547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [469.792634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [469.792721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [469.792807] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [469.792892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [469.792977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [469.793063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [469.793147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [469.793227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [469.793298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [469.793369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [469.793436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [469.793523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [469.793608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [469.793694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [469.793776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [469.793844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [469.793915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [469.793985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [469.794055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [469.794128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [469.794337] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [469.794462] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [469.794573] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [469.794665] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [469.794762] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [469.794849] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [469.794933] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [469.795016] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [469.795098] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [469.795178] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [469.795245] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [469.795312] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [469.795377] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [469.795443] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [469.795533] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [469.795615] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [469.795696] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [469.795794] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [469.795955] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [469.796029] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [469.796124] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [469.796202] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [469.797162] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [469.797247] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [469.797345] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [469.806493] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [469.806626] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [469.806741] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<6> [469.830520] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [469.830845] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [469.853776] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [470.014578] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [470.016192] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [470.017164] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [470.017843] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [470.018882] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [470.019823] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [470.020874] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [470.021163] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [470.022589] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [470.022867] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [470.023642] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [470.024004] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [470.024271] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [470.024612] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [470.040917] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [470.042624] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [470.043045] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [470.044471] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [470.046783] Console: switching to colour frame buffer device 180x56

<6> [470.096728] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [470.096750] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [470.097294] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [470.097890] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [470.098401] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [470.098886] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [470.099391] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [470.099862] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [470.100383] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [470.100839] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [470.101249] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [470.101725] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [470.102109] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [470.102491] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [470.102892] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [470.103205] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [470.103548] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [470.103858] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [470.104137] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [470.104455] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [470.104708] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [470.104954] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [470.105187] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [470.106391] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [470.106558] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [470.106771] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [470.106986] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [470.107193] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [470.109313] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [470.109788] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [470.110013] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [470.110171] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [470.113888] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<6> [470.115026] [IGT] xe_configfs: finished subtest ctx-restore-mid-bb, SUCCESS

<6> [470.115397] [IGT] xe_configfs: exiting, ret=0

<7> [470.115532] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [470.115656] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [470.115788] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [470.115927] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [470.116050] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [470.116167] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [470.116280] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [470.124294] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [470.124330] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [470.125140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [470.125163] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [470.126281] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [470.126688] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [470.126899] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [470.127405] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [470.128044] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [470.128054] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [470.128058] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.128060] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [470.128065] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [470.128068] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.128071] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [470.128083] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.128085] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [470.128089] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.128134] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [470.128297] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [470.128500] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [470.129143] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [470.129146] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [470.129149] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.129231] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [470.129246] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [470.129252] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [470.129258] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [470.129264] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [470.129516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [470.129522] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [470.129526] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [470.129683] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [470.129687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [470.129691] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [470.129849] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [470.129859] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [470.129868] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [470.129877] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [470.129886] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [470.130220] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [470.130272] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [470.130281] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [470.130399] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [470.141742] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [470.157691] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [470.157716] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [470.157890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [470.157911] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [470.158961] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [470.159717] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [470.160231] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [470.160713] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [470.161192] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [470.161207] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [470.161214] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.161217] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [470.161227] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [470.161234] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.161239] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [470.161248] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.161252] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [470.161260] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.161302] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [470.161733] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [470.162107] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [470.163034] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [470.163042] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [470.163048] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [470.163228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [470.163241] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [470.163255] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [470.163268] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [470.163282] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [470.163731] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [470.163746] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [470.163758] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [470.164138] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [470.164151] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [470.164162] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [470.164588] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [470.164601] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [470.164611] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [470.164620] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [470.164627] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [470.164698] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [470.164738] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [470.164750] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [470.164801] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [470.174318] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<6> [470.198308] Console: switching to colour dummy device 80x25

<7> [470.207845] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:392] is removed

<7> [470.208203] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0

<7> [470.209021] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [470.209610] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [470.210203] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [470.211685] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [470.212546] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [470.213608] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [470.214316] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [470.214956] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [470.215984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [470.217031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [470.220239] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2

<7> [470.224172] xe 0000:00:02.0: [drm:drm_client_release] fbdev

<7> [470.226805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)

<7> [470.227360] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [470.227817] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)

<7> [470.228256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)

<7> [470.228777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)

<7> [470.229204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)

<7> [470.229670] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)

<7> [470.230093] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)

<7> [470.230577] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)

<7> [470.230973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)

<7> [470.231446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)

<7> [470.231891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)

<7> [470.232275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)

<7> [470.232720] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)

<7> [470.233082] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)

<7> [470.233435] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)

<7> [470.233771] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)

<7> [470.234159] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)

<7> [470.234530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)

<7> [470.234931] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)

<7> [470.235262] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)

<7> [470.235703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)

<7> [470.236029] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)

<7> [470.236368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)

<7> [470.236696] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)

<7> [470.237025] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)

<7> [470.237363] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)

<7> [470.237688] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)

<7> [470.238008] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)

<7> [470.238336] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)

<7> [470.238654] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)

<7> [470.238974] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)

<7> [470.239292] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)

<7> [470.239739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)

<7> [470.240062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)

<7> [470.240515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)

<7> [470.240833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)

<7> [470.241147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)

<7> [470.241609] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [470.241935] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0

<7> [470.242576] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [470.242964] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0

<7> [470.243451] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0

<7> [470.243838] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz

<7> [470.244246] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [470.244905] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz

<7> [470.245289] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [470.245777] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]

<7> [470.246144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no

<7> [470.246488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [470.246798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [470.247090] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [470.247431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [470.247765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [470.248390] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM

<7> [470.248641] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]

<7> [470.270774] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [470.454475] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0

<7> [470.455073] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [470.458637] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off

<7> [470.459078] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time

<7> [470.459560] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060

<7> [470.510808] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [470.511108] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]

<7> [470.511538] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000

<7> [470.512309] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0

<7> [470.512699] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A

<7> [470.512613] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short

<7> [470.513028] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [470.513270] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [470.513470] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [470.513668] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [470.513864] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [470.513838] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [470.514062] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [470.514272] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [470.514507] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [470.514697] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [470.514881] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [470.515055] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [470.515243] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [470.515428] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [470.515602] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [470.515867] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [470.516061] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [470.516264] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [470.516634] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [470.516946] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [470.517234] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [470.517500] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<7> [470.517785] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [470.551957] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010

<7> [470.552476] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long

<7> [470.552896] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10

<7> [470.553157] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:391:eDP-1] removing connector from sysfs

<7> [470.553405] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]

<7> [470.561461] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:400:DP-1] removing connector from sysfs

<7> [470.570531] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:412:DP-2] removing connector from sysfs

<7> [470.582584] xe 0000:00:02.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:420:DP-3] removing connector from sysfs

<7> [470.617247] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [470.617968] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [470.692068] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [470.695501] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [470.747314] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (264 ms remaining)

<7> [471.014178] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060

<7> [471.045274] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [471.046430] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [471.053357] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [471.058897] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4

<7> [471.082296] xe 0000:00:02.0: [drm:__xe_driver_flr [xe]] Triggering Driver-FLR

<7> [471.086808] xe 0000:00:02.0: [drm:drm_pagemap_shrinker_fini [drm_gpusvm_helper]] Destroying dpagemap shrinker.

<6> [471.138492] xe 0000:00:02.0: vgaarb: deactivate vga console

<7> [471.139499] xe 0000:00:02.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error

<6> [471.139938] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0

<7> [471.139946] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0

<7> [471.140095] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)

<7> [471.140178] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)

<7> [471.141038] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes

<7> [471.141172] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display

<7> [471.141284] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)

<7> [471.141387] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018

<7> [471.141479] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0

<7> [471.141546] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported

<7> [471.141605] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported

<7> [471.141663] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported

<7> [471.141719] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present

<7> [471.141785] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)

<7> [471.141846] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5

<7> [471.141922] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8

<7> [471.141998] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4

<7> [471.142198] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0

<7> [471.142309] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152

<7> [471.142425] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296

<7> [471.142521] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392

<7> [471.142609] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520

<7> [471.142688] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400

<7> [471.142762] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800

<7> [471.142835] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [471.142908] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [471.142979] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400

<7> [471.143067] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [471.143160] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [471.143253] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [471.143343] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400

<7> [471.143418] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [471.143488] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [471.143558] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [471.143628] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400

<7> [471.143697] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [471.143766] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [471.143836] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [471.143904] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400

<7> [471.143973] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [471.144053] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [471.144143] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [471.144232] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400

<7> [471.144321] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800

<7> [471.144395] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400

<7> [471.144463] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544

<7> [471.144536] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz

<7> [471.144865] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz

<7> [471.144962] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262

<7> [471.145064] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)

<7> [471.145163] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)

<7> [471.145272] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)

<7> [471.145373] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)

<7> [471.145465] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848)

<7> [471.145540] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)

<7> [471.145609] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers

<7> [471.145701] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)

<7> [471.145775] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366)

<7> [471.145848] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)

<7> [471.145921] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)

<7> [471.145995] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)

<7> [471.146099] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)

<7> [471.146201] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0

<7> [471.146300] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2

<7> [471.146378] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806

<7> [471.146461] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [471.146533] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [471.146603] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6

<7> [471.146675] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping

<7> [471.146743] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0

<7> [471.146811] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [471.146878] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [471.146945] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0

<7> [471.147024] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a

<7> [471.147137] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [471.147264] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1

<7> [471.147536] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 19200 kHz, VCO 0 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [471.147620] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Sanitizing cdclk programmed by pre-os

<7> [471.147742] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [471.147868] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [471.148019] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.

<7> [471.148132] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [471.148238] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [471.148336] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00

<7> [471.148458] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [471.148573] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [471.148675] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [471.148782] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C

<7> [471.148890] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D

<7> [471.148997] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC

<7> [471.149805] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin

<7> [471.150665] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:

<7> [471.150778] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0

<7> [471.150865] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)

<7> [471.150949] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)

<7> [471.151039] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)

<7> [471.151152] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP)

<7> [471.151273] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:

<7> [471.151373] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0

<7> [471.151457] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)

<7> [471.151532] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)

<7> [471.151606] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [471.151680] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)

<7> [471.151755] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)

<7> [471.151826] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)

<7> [471.151902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:

<7> [471.151972] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0

<7> [471.152094] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)

<7> [471.152186] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)

<7> [471.152277] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [471.152358] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)

<7> [471.152369] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1

<7> [471.152428] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)

<7> [471.152491] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us

<7> [471.152496] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)

<7> [471.152563] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided

<7> [471.152568] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:

<7> [471.152629] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec)

<7> [471.152636] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0

<7> [471.152692] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec)

<7> [471.152702] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)

<7> [471.152754] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec)

<7> [471.152769] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)

<7> [471.152815] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec)

<7> [471.152835] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)

<7> [471.152873] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec)

<7> [471.152901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)

<7> [471.152931] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec)

<7> [471.152967] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)

<7> [471.152989] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec)

<7> [471.153044] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)

<7> [471.153069] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec)

<7> [471.153146] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec)

<7> [471.153221] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec)

<7> [471.153295] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec)

<7> [471.161598] xe 0000:00:02.0: [drm:intel_crtc_init [xe]] 3 display pipes available.

<6> [471.164553] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29)

<7> [471.166376] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [471.166505] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz

<7> [471.166614] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz

<7> [471.166737] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:390:DDI A/PHY A] Using AUX CH A (VBT)

<7> [471.166857] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:390:DDI A/PHY A]

<7> [471.166958] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2

<7> [471.167083] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2

<7> [471.167188] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless

<7> [471.167299] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa

<7> [471.167401] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300

<7> [471.167486] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002

<7> [471.167584] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName

<7> [471.167683] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz

<7> [471.167781] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0

<7> [471.167873] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:390:DDI A/PHY A] initial power sequencer: PPS 0

<7> [471.167987] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 0 backlight_on 0 backlight_off 0 power_down 0 power_cycle 0

<7> [471.168289] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [471.168386] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [471.168479] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [471.168570] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [471.168690] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [471.168908] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A

<7> [471.170023] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on

<7> [471.170113] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [471.170238] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060

<7> [471.180059] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [471.180185] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [471.180272] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 panel power wasn't enabled

<7> [471.418994] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [471.430980] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000

<7> [471.454960] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e

<7> [471.490925] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3

<7> [471.502920] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported

<7> [471.562917] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [471.913800] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [471.913815] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [471.913817] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [471.913819] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [471.913821] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [471.913823] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [471.913824] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [471.913826] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [471.913827] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [471.913829] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [471.913872] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [471.913873] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [471.913874] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [471.913894] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [471.914022] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:391:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [471.925780] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:391:eDP-1] Performing OUI wait (0 ms)

<7> [471.937782] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:391:eDP-1] Detected unsupported HDR backlight interface version 0

<7> [471.937886] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:391:eDP-1] DRRS type: seamless

<7> [471.937976] xe 0000:00:02.0: [drm:get_vbt_pwm_freq [xe]] VBT defined backlight frequency 200 Hz

<7> [471.938062] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:391:eDP-1] Using native PCH PWM for backlight control (controller=0)

<7> [471.938151] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:391:eDP-1] backlight initialized, disabled, brightness 0/192000

<7> [471.938331] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 2000 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000

<7> [471.938410] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000

<7> [471.938485] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100

<7> [471.938557] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500

<7> [471.938621] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200

<7> [471.938715] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60

<7> [471.938955] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:399:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)

<7> [471.939089] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [471.939206] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:399:DDI TC1/PHY TC1]

<7> [471.939674] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:411:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)

<7> [471.939799] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [471.939892] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:411:DDI TC2/PHY TC2]

<7> [471.940127] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:419:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)

<7> [471.940228] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)

<7> [471.940316] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:419:DDI TC3/PHY TC3]

<7> [471.940659] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled

<7> [471.940765] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled

<7> [471.940854] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] hw state readout: disabled

<7> [471.940924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A

<7> [471.940996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A

<7> [471.941062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A

<7> [471.941126] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A

<7> [471.941189] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A

<7> [471.941252] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A

<7> [471.941315] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B

<7> [471.941376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B

<7> [471.941438] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B

<7> [471.941504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B

<7> [471.941572] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B

<7> [471.941650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B

<7> [471.941727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] hw state readout: disabled, pipe C

<7> [471.941815] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] hw state readout: disabled, pipe C

<7> [471.941878] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] hw state readout: disabled, pipe C

<7> [471.941944] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] hw state readout: disabled, pipe C

<7> [471.942011] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] hw state readout: disabled, pipe C

<7> [471.942078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] hw state readout: disabled, pipe C

<7> [471.942145] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:390:DDI A/PHY A] hw state readout: disabled, pipe A

<7> [471.942211] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [471.942274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:399:DDI TC1/PHY TC1] hw state readout: disabled, pipe A

<7> [471.942337] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:401:DP-MST A] hw state readout: disabled, pipe A

<7> [471.942400] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:402:DP-MST B] hw state readout: disabled, pipe B

<7> [471.942462] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:403:DP-MST C] hw state readout: disabled, pipe C

<7> [471.942526] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [471.942587] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:411:DDI TC2/PHY TC2] hw state readout: disabled, pipe A

<7> [471.942648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:413:DP-MST A] hw state readout: disabled, pipe A

<7> [471.942718] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:414:DP-MST B] hw state readout: disabled, pipe B

<7> [471.942804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:415:DP-MST C] hw state readout: disabled, pipe C

<7> [471.942879] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4

<7> [471.942940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:419:DDI TC3/PHY TC3] hw state readout: disabled, pipe A

<7> [471.943003] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:421:DP-MST A] hw state readout: disabled, pipe A

<7> [471.943065] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:422:DP-MST B] hw state readout: disabled, pipe B

<7> [471.943127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:423:DP-MST C] hw state readout: disabled, pipe C

<7> [471.943193] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0

<7> [471.943270] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [471.943347] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1

<7> [471.943427] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0

<7> [471.943505] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0

<7> [471.943580] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0

<7> [471.943648] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0

<7> [471.943725] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:391:eDP-1] hw state readout: disabled

<7> [471.943803] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:400:DP-1] hw state readout: disabled

<7> [471.943866] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:412:DP-2] hw state readout: disabled

<7> [471.943929] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:420:DP-3] hw state readout: disabled

<7> [471.943989] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz

<7> [471.944053] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz

<7> [471.944116] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz

<7> [471.944180] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz

<7> [471.944243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz

<7> [471.944304] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz

<7> [471.944367] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz

<7> [471.944428] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz

<7> [471.944488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz

<7> [471.944542] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz

<7> [471.944597] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz

<7> [471.944652] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz

<7> [471.944712] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz

<7> [471.944800] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz

<7> [471.944860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:271:plane 1C] min_cdclk 0 kHz

<7> [471.944919] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:301:plane 2C] min_cdclk 0 kHz

<7> [471.944979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:331:plane 3C] min_cdclk 0 kHz

<7> [471.945040] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:361:plane 4C] min_cdclk 0 kHz

<7> [471.945102] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:371:plane 5C] min_cdclk 0 kHz

<7> [471.945163] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:381:cursor C] min_cdclk 0 kHz

<7> [471.945223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:387:pipe C] min_cdclk 0 kHz

<7> [471.945288] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [471.945346] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [471.945403] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:387:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no

<7> [471.945459] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0

<7> [471.945542] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0

<7> [471.945618] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0

<7> [471.945717] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: disabled, Transcoder A secondary: no, Transcoder B secondary: no

<7> [471.945841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]

<7> [471.945924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]

<7> [471.946007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [setup_hw_state]

<7> [471.946089] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling

<6> [471.947593] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [471.949905] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [471.949992] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000

<7> [471.950054] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000

<7> [471.950105] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [471.950153] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [471.950200] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [471.950247] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [471.950293] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [471.950339] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [471.950385] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [471.950430] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [471.950475] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [471.950520] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [471.950564] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [471.950610] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [471.950686] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)

<7> [471.961895] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [471.962587] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [471.962667] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f

<7> [471.962723] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f

<7> [471.962798] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff

<7> [471.962853] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16

<7> [471.962908] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff

<6> [472.478095] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off

<6> [472.478101] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off

<6> [472.478102] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off

<7> [472.478248] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine

<7> [472.478345] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [472.478432] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [472.478502] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [472.478661] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine

<7> [472.478792] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine

<7> [472.478919] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine

<7> [472.478993] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access

<7> [472.479062] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access

<7> [472.479127] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access

<7> [472.480097] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs

<7> [472.480182] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000

<7> [472.480258] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000

<7> [472.480326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440

<7> [472.480391] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000

<7> [472.480455] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000

<7> [472.480518] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f

<7> [472.480590] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1

<7> [472.480650] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16

<7> [472.480706] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc

<7> [472.480762] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c

<7> [472.480818] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130

<7> [472.480873] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c

<7> [472.480927] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100

<7> [472.480980] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100

<7> [472.481033] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100

<7> [472.481087] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100

<7> [472.481141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100

<7> [472.481195] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100

<7> [472.481247] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100

<7> [472.481301] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100

<7> [472.481353] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100

<7> [472.481406] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100

<7> [472.481457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100

<7> [472.481508] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100

<7> [472.481559] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs

<7> [472.481632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000

<7> [472.481692] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306

<7> [472.481752] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080

<7> [472.481810] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc

<7> [472.481865] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01

<7> [472.481920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c

<7> [472.481978] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040

<7> [472.482037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200

<7> [472.482094] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000

<7> [472.482152] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840

<7> [472.482208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002

<7> [472.482267] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400

<7> [472.482326] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000

<7> [472.482383] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000

<7> [472.482554] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs

<7> [472.482620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000

<7> [472.482674] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306

<7> [472.482729] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080

<7> [472.482875] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs

<7> [472.482930] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000

<7> [472.482983] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306

<7> [472.483034] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080

<7> [472.483161] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs

<7> [472.483214] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000

<7> [472.483268] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306

<7> [472.483321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080

<7> [472.483375] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc

<7> [472.483427] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01

<7> [472.483478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c

<7> [472.483764] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled

<7> [472.483855] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x004543f7

<7> [472.483903] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800

<7> [472.483949] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014

<7> [472.483995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001

<7> [472.484042] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ad2

<7> [472.484088] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004

<7> [472.484134] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000

<7> [472.484179] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000

<7> [472.484224] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000

<7> [472.484269] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000

<7> [472.484313] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000

<7> [472.484357] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000

<7> [472.484402] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000

<7> [472.484445] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000

<7> [472.484510] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs

<7> [472.484589] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells

<7> [472.485002] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xe19000 for xe_guc_buf_cache_init_with_size [xe]

<7> [472.487183] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs.

<7> [472.504549] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)

<7> [472.515735] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034

<7> [472.516148] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled

<7> [472.517369] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords

<7> [472.517456] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400

<7> [472.517514] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040

<7> [472.517587] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020

<7> [472.517644] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240

<7> [472.517698] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000

<7> [472.517750] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420

<7> [472.517806] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000

<7> [472.517865] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000

<7> [472.519980] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords

<7> [472.520064] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606

<7> [472.520125] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<7> [472.521673] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords

<7> [472.521751] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04

<6> [472.525047] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0

<7> [472.529241] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [472.529386] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [472.529497] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000

<7> [472.529629] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [472.529724] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [472.529817] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [472.529911] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [472.530004] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [472.530097] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [472.530189] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [472.530283] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [472.530377] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [472.530471] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [472.530669] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<6> [472.531486] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13

<6> [472.533459] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429

<6> [472.534812] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])

<7> [472.534974] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K

<7> [472.535169] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)

<7> [472.556843] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [472.557368] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [472.557592] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000

<7> [472.557751] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000

<7> [472.557904] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000

<7> [472.558050] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16

<7> [472.558214] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f

<6> [472.558369] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off

<6> [472.558375] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off

<6> [472.558379] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off

<6> [472.558383] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off

<6> [472.558388] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off

<6> [472.558392] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off

<6> [472.558397] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off

<6> [472.558401] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off

<6> [472.558406] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off

<6> [472.558411] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off

<7> [472.558772] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine

<7> [472.559001] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [472.559248] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [472.559518] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [472.559795] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [472.560007] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [472.560219] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [472.560480] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [472.560721] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [472.560977] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [472.561460] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine

<7> [472.561688] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access

<7> [472.561897] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access

<7> [472.562103] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access

<7> [472.562311] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access

<7> [472.562508] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access

<7> [472.562754] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access

<7> [472.562960] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access

<7> [472.563153] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access

<7> [472.563346] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access

<7> [472.563672] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine

<7> [472.565616] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs

<7> [472.565799] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000

<7> [472.565976] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000

<7> [472.566140] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440

<7> [472.566301] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000

<7> [472.566454] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000

<7> [472.566633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f

<7> [472.566823] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020

<7> [472.566996] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000

<7> [472.567150] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008

<7> [472.567297] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1

<7> [472.567442] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16

<7> [472.567590] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc

<7> [472.567727] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c

<7> [472.567862] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130

<7> [472.568001] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c

<7> [472.568124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100

<7> [472.568246] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100

<7> [472.568367] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100

<7> [472.568486] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100

<7> [472.568628] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100

<7> [472.568747] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100

<7> [472.568870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100

<7> [472.568979] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100

<7> [472.569090] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100

<7> [472.569194] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100

<7> [472.569298] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100

<7> [472.569401] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100

<7> [472.569498] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs

<7> [472.569633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000

<7> [472.569748] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000

<7> [472.569862] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c

<7> [472.569970] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1

<7> [472.570073] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0

<7> [472.570178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c

<7> [472.570280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1

<7> [472.570382] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0

<7> [472.570478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c

<7> [472.570587] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1

<7> [472.570681] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0

<7> [472.571350] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs

<7> [472.571445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000

<7> [472.571536] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000

<7> [472.571655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c

<7> [472.571740] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1

<7> [472.571824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0

<7> [472.571916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c

<7> [472.572011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1

<7> [472.572107] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0

<7> [472.572192] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c

<7> [472.572274] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1

<7> [472.572351] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0

<7> [472.572884] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs

<7> [472.572962] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000

<7> [472.573037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000

<7> [472.573808] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled

<7> [472.573930] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00ef63f7

<7> [472.573993] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000

<7> [472.574053] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014

<7> [472.574111] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001

<7> [472.574168] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00002016

<7> [472.574223] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004

<7> [472.574277] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000

<7> [472.574330] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000

<7> [472.574383] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000

<7> [472.574436] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000

<7> [472.574488] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000

<7> [472.574546] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000

<7> [472.574596] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000

<7> [472.574646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000

<7> [472.574733] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs

<7> [472.574829] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells

<7> [472.576983] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1a84000 for xe_guc_buf_cache_init_with_size [xe]

<7> [472.596294] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056)

<7> [472.617664] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034

<7> [472.618181] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled

<7> [472.620259] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords

<7> [472.620445] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [472.624684] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords

<7> [472.624914] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [472.629384] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords

<7> [472.629691] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04

<7> [472.675402] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC

<7> [472.677257] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [472.677908] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [472.678474] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [472.679029] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536

<7> [472.679838] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0

<7> [472.680295] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:

<7> [472.680765] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0

<7> [472.682135] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008

<7> [472.682802] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108

<7> [472.683398] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208

<7> [472.683989] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308

<7> [472.684553] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8

<7> [472.685100] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008

<7> [472.685691] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108

<7> [472.686232] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208

<7> [472.686784] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308

<7> [472.687294] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8

<7> [472.687773] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 0: start 0x52008

<7> [472.688205] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 1: start 0x52108

<7> [472.688661] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 2: start 0x52208

<7> [472.689080] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 3: start 0x52308

<7> [472.689457] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:387:pipe C] FQ 4: start 0x523c8

<7> [472.690643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400

<7> [472.691109] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400

<7> [472.691526] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [472.691892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400

<7> [472.692250] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0

<7> [472.692744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]

<7> [472.693083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]

<7> [472.693397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [fastset]

<7> [472.693872] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800010 0x9a00071)

<7> [472.694202] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [472.694528] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]

<7> [472.694797] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]

<7> [472.706249] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:391:eDP-1] adding connector to sysfs

<7> [472.707583] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:391:eDP-1] backlight device intel_backlight registered

<7> [472.707751] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:391:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes

<7> [472.708215] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1

<7> [472.709317] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:391:eDP-1] generating connector hotplug event

<7> [472.709395] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:400:DP-1] adding connector to sysfs

<7> [472.710055] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1

<7> [472.710997] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:400:DP-1] generating connector hotplug event

<7> [472.711069] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:412:DP-2] adding connector to sysfs

<7> [472.711717] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2

<7> [472.712661] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:412:DP-2] generating connector hotplug event

<7> [472.712720] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:420:DP-3] adding connector to sysfs

<7> [472.713318] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3

<7> [472.714271] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:420:DP-3] generating connector hotplug event

<6> [472.714322] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0

<7> [472.714331] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected

<6> [472.731713] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)

<6> [472.736741] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input21

<7> [472.737635] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)

<7> [472.737785] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384

<6> [472.739667] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])

<7> [472.742291] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping

<7> [472.742413] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping

<7> [472.742508] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:387:pipe C] not active, skipping

<7> [472.742587] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config

<7> [472.742827] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [472.742896] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [472.742905] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [472.743513] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [472.743828] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [472.743944] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [472.744055] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [472.744187] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [472.744195] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [472.744199] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [472.744201] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [472.744204] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [472.744207] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [472.744209] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [472.744212] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [472.744215] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [472.744218] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [472.744243] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [472.744356] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [472.744466] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<7> [472.744974] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] status updated from unknown to connected

<7> [472.744994] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<5> [472.745083] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [472.745086] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [472.745088] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [472.745155] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [472.745159] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [472.745163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [472.745168] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [472.745173] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [472.745513] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [472.745639] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] status updated from unknown to disconnected

<7> [472.745649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [472.745663] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [472.745668] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [472.745791] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [472.745890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] status updated from unknown to disconnected

<7> [472.745897] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [472.745905] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [472.745909] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [472.746033] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4

<7> [472.746134] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] status updated from unknown to disconnected

<7> [472.746140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [472.746148] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [472.746153] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [472.746156] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [472.746160] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [472.746186] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [472.746205] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [472.746210] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config

<7> [472.746667] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [472.746877] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [472.747080] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [472.747206] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [472.747409] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane

<7> [472.747419] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one

<7> [472.779828] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01ea5000

<6> [472.780641] fbcon: xedrmfb (fb0) is primary device

<6> [472.781954] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0

<7> [472.782092] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)

<7> [472.782233] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000

<7> [472.782272] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed

<7> [472.782348] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000

<7> [472.782485] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0

<7> [472.782601] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]

<7> [472.782714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)

<7> [472.782825] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [472.782934] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)

<7> [472.783041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)

<7> [472.783146] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)

<7> [472.783252] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)

<7> [472.783356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)

<7> [472.783457] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)

<7> [472.783589] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)

<7> [472.783690] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)

<7> [472.783787] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)

<7> [472.783885] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)

<7> [472.783980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)

<7> [472.784074] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)

<7> [472.784170] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)

<7> [472.784266] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)

<7> [472.784347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)

<7> [472.784427] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)

<7> [472.784560] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)

<7> [472.784662] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)

<7> [472.784763] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)

<7> [472.784848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)

<7> [472.784927] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)

<7> [472.785002] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)

<7> [472.785075] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)

<7> [472.785147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)

<7> [472.785220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)

<7> [472.785291] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)

<7> [472.785361] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)

<7> [472.785431] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)

<7> [472.785530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)

<7> [472.785622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)

<7> [472.785712] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)

<7> [472.785797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)

<7> [472.785868] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dpll_hw_state

<7> [472.785937] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:

<7> [472.786005] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [472.786079] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 0

<7> [472.786153] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000

<7> [472.786227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [472.786297] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000

<7> [472.786364] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000

<7> [472.786431] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000

<7> [472.786520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000

<7> [472.786607] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000

<7> [472.786695] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000

<7> [472.786777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000

<7> [472.786846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000

<7> [472.786912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000

<7> [472.786978] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000

<7> [472.787044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000

<7> [472.787113] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [472.787183] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:

<7> [472.787255] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [472.787335] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [472.787426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.

<7> [472.787555] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:

<7> [472.787648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21

<7> [472.787740] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [472.787848] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [472.787940] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [472.788023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [472.788100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [472.788175] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)

<7> [472.788250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)

<7> [472.788320] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)

<7> [472.788393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)

<7> [472.788485] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [472.788913] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [472.788978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [472.789040] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051

<7> [472.789098] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45

<7> [472.789157] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [472.789213] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0

<7> [472.789269] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87

<7> [472.789326] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88

<7> [472.789404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1

<7> [472.789700] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400

<7> [472.789810] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400

<7> [472.789900] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [472.789979] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400

<7> [472.790054] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461

<7> [472.790132] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz

<7> [472.790226] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz

<7> [472.790303] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing

<7> [472.790377] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz

<7> [472.790456] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0

<7> [472.790586] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0

<7> [472.790682] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0

<7> [472.790780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [472.790882] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB

<7> [472.790980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0

<7> [472.791064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [472.791137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [472.791210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [472.791281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [472.791352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64

<7> [472.791423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [472.791509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled

<7> [472.791601] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [472.791691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled

<7> [472.791779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [472.791848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4

<7> [472.791917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14

<7> [472.791986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB

<7> [472.792059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB

<7> [472.792127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0

<7> [472.792196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range

<7> [472.792265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined

<7> [472.792333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [472.792401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [472.792479] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97

<7> [472.792566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906

<7> [472.792653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0

<7> [472.792740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [472.792816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [472.792883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [472.792949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [472.793016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa

<7> [472.793084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855

<7> [472.793149] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0

<7> [472.793215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [472.793283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [472.793352] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [472.793420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no

<7> [472.793525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,

<7> [472.793615] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.

<7> [472.793704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:

<7> [472.793791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21

<7> [472.793878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1

<7> [472.793957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0

<7> [472.794025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0

<7> [472.794091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1

<7> [472.794158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23

<7> [472.794223] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [472.794289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [472.794354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [472.794419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [472.794502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [472.794587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [472.794671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [472.794755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [472.794824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [472.794888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [472.794952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [472.795017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [472.795081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [472.795145] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [472.795211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [472.795275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0

<7> [472.795340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [472.795405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [472.795480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [472.795568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [472.795665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [472.795949] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)

<7> [472.796054] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0

<7> [472.796139] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)

<7> [472.796214] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480

<7> [472.796292] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]

<7> [472.796358] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]

<7> [472.796423] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]

<7> [472.796500] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]

<7> [472.796585] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]

<7> [472.796666] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]

<7> [472.796747] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]

<7> [472.796814] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]

<7> [472.796874] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]

<7> [472.796934] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]

<7> [472.796994] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]

<7> [472.797053] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]

<7> [472.797112] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]

<7> [472.797189] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [472.797324] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [472.797385] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)

<7> [472.797483] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [472.797580] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0

<7> [472.798494] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on

<7> [472.798583] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (0 ms remaining)

<7> [472.798687] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000068

<7> [472.804848] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC

<7> [472.808511] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [472.808610] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on

<7> [472.808709] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x0000006b

<7> [473.018428] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete

<7> [473.020095] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80

<7> [473.021187] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates

<7> [473.022047] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05

<7> [473.023165] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [473.024171] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1

<7> [473.025281] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK

<7> [473.025628] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4

<7> [473.027086] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful

<7> [473.027441] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4

<7> [473.028168] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [473.028663] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]

<7> [473.028949] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A

<7> [473.029264] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518

<7> [473.045443] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2

<7> [473.046890] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]

<7> [473.047203] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [473.048368] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 18 bpp

<6> [473.050401] Console: switching to colour frame buffer device 180x56

<6> [473.101748] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device

<7> [473.101774] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20

<7> [473.102330] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0

<7> [473.102910] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no

<7> [473.103392] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes

<7> [473.103893] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes

<7> [473.104376] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes

<7> [473.104808] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes

<7> [473.105233] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes

<7> [473.105753] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes

<7> [473.106225] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no

<7> [473.106713] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes

<7> [473.107084] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no

<7> [473.107470] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes

<7> [473.107867] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no

<7> [473.108194] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes

<7> [473.108556] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no

<7> [473.108911] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no

<7> [473.109227] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no

<7> [473.109584] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes

<7> [473.109901] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes

<7> [473.110240] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes

<7> [473.110560] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz

<7> [473.112152] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [473.112183] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [473.112392] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [473.112288] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device

<7> [473.112418] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [473.112697] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC

<7> [473.113157] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D

<7> [473.113636] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C

<7> [473.114025] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [473.114351] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [473.114701] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [473.115008] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [473.115292] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [473.116040] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [473.116679] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [473.117145] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [473.117771] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [473.118338] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [473.118379] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [473.118389] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.118395] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [473.118406] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [473.118416] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.118424] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [473.118434] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.118440] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [473.118451] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.118527] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [473.119005] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [473.119616] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [473.120998] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [473.121012] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [473.121020] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.121415] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [473.121439] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [473.121463] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [473.121487] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [473.121512] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [473.122182] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [473.122207] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [473.122224] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [473.122919] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [473.122944] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [473.122826] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no

<7> [473.122965] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [473.124053] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [473.124077] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [473.124096] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [473.124111] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [473.124124] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [473.124237] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [473.124306] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [473.124323] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [473.124437] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [473.129757] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [473.130108] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [473.145978] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [473.146053] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event

<7> [473.178868] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]

<7> [473.178907] xe 0000:00:02.0: [drm:drm_client_modeset_probe]

<7> [473.179226] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]

<7> [473.179270] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]

<7> [473.180381] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [473.180989] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [473.181548] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [473.182636] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00

<7> [473.184023] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000

<7> [473.184991] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [473.185874] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000

<7> [473.186786] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz

<5> [473.186819] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [473.186833] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.186840] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00

<7> [473.186858] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.

<5> [473.186873] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.186884] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor

<5> [473.186900] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.186909] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0

<5> [473.186925] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.187172] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes

<7> [473.187872] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps

<7> [473.188458] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no

<5> [473.189768] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [473.189780] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<5> [473.189790] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)

<7> [473.190140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:

<7> [473.190165] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa

<7> [473.190191] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa

<7> [473.190216] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]

<7> [473.190239] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]

<7> [473.190920] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected

<7> [473.190941] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]

<7> [473.190957] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]

<7> [473.191649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected

<7> [473.191665] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]

<7> [473.191678] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]

<7> [473.192185] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected

<7> [473.192204] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] enabled? yes

<7> [473.192222] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:400:DP-1] enabled? no

<7> [473.192236] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:412:DP-2] enabled? no

<7> [473.192250] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:420:DP-3] enabled? no

<7> [473.192374] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration

<7> [473.192432] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:391:eDP-1] found preferred mode: 2880x1800

<7> [473.192449] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config

<7> [473.192517] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 2880x1800 set (0,0)

<7> [473.194999] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [473.195413] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [473.212815] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0

<7> [473.218843] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed

<7> [473.229398] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [473.230094] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [473.230776] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

Results for igt@xe_configfs@ctx-restore-mid-bb