Result:
i915_display_info2 igt_runner2 results2.json results2-xe-load.json guc_logs2.tar i915_display_info_post_exec2 boot2 dmesg2
| Detail | Value |
|---|---|
| Duration | 3.48 seconds |
| Hostname |
shard-lnl-3 |
| Igt-Version |
IGT-Version: 2.3-g6f7cf72fa (x86_64) (Linux: 6.19.0-rc4-lgci-xe-xe-4354-9e5d93261e35cda41+ x86_64) |
| Out |
Using IGT_SRANDOM=1767944895 for randomisation Opened device: /dev/dri/card0 Starting subtest: universal-plane-sanity Starting dynamic subtest: pipe-A-eDP-1 Dynamic subtest pipe-A-eDP-1: SUCCESS (0.751s) Starting dynamic subtest: pipe-B-eDP-1 Dynamic subtest pipe-B-eDP-1: SUCCESS (1.314s) Starting dynamic subtest: pipe-C-eDP-1 Dynamic subtest pipe-C-eDP-1: SUCCESS (1.409s) Subtest universal-plane-sanity: SUCCESS (3.484s) |
| Err |
Starting subtest: universal-plane-sanity Starting dynamic subtest: pipe-A-eDP-1 Dynamic subtest pipe-A-eDP-1: SUCCESS (0.751s) Starting dynamic subtest: pipe-B-eDP-1 Dynamic subtest pipe-B-eDP-1: SUCCESS (1.314s) Starting dynamic subtest: pipe-C-eDP-1 Dynamic subtest pipe-C-eDP-1: SUCCESS (1.409s) Subtest universal-plane-sanity: SUCCESS (3.484s) |
| Dmesg |
<6> [290.367540] Console: switching to colour dummy device 80x25
<6> [290.367796] [IGT] kms_universal_plane: executing
<7> [290.373404] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [290.373414] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [290.373554] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [290.373646] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [290.373857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [290.373859] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [290.373968] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [290.374077] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [290.374340] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [290.374343] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [290.374449] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [290.374528] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<7> [290.374791] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1]
<7> [290.374794] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:391:eDP-1]
<7> [290.375234] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [290.375544] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [290.375648] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [290.375750] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [290.375865] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [290.375869] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [290.375870] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [290.375871] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [290.375873] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [290.375874] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [290.375875] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD monitor
<5> [290.375877] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [290.375878] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:391:eDP-1] ELD size 20, SAD count 0
<5> [290.375880] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [290.375891] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] VRR capable: yes
<7> [290.375968] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [290.376054] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:391:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [290.376566] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [290.376568] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [290.376570] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [290.376628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:391:eDP-1] probed modes:
<7> [290.376632] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [290.376636] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [290.376650] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1]
<7> [290.376654] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:400:DP-1]
<7> [290.376803] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:400:DP-1] disconnected
<7> [290.376815] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2]
<7> [290.376818] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:412:DP-2]
<7> [290.376931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:412:DP-2] disconnected
<7> [290.376938] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3]
<7> [290.376940] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:420:DP-3]
<7> [290.377050] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:420:DP-3] disconnected
<6> [290.377333] [IGT] kms_universal_plane: starting subtest universal-plane-sanity
<6> [290.378200] [IGT] kms_universal_plane: starting dynamic subtest pipe-A-eDP-1
<7> [290.388497] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430]
<7> [290.413899] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [290.435529] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [290.467676] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.467799] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.573927] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]
<7> [290.574001] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:391:eDP-1]
<7> [290.594722] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [290.598872] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [290.624961] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [290.625500] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [290.625713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [290.625912] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84
<7> [290.626173] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85
<7> [290.757307] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x1
<7> [290.757584] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [290.776422] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 2780x1700->2880x1800 scaler_users = 0x1
<7> [290.776702] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [290.790577] [drm:__setplane_check] Invalid crtc for plane
<7> [290.790613] [drm:__setplane_check] Invalid crtc for plane
<7> [290.790653] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:431] from all active usage due to RMFB ioctl
<7> [290.790718] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:431] is removed
<7> [290.790751] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [290.791001] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [290.791283] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [290.791496] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [290.791747] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [290.791958] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [290.792278] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [290.792561] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [290.792838] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [290.793201] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [290.793481] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [290.793764] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [290.794465] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [290.833129] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]
<7> [290.833301] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [290.833645] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [290.833925] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [290.834229] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [290.834486] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [290.834736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [290.834980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [290.835255] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [290.835497] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [290.835789] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [290.836034] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [290.836264] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [290.836493] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [290.836747] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [290.836973] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [290.837228] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [290.837453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [290.837685] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [290.837907] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [290.838154] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [290.838427] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [290.838652] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [290.838895] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [290.839136] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [290.839355] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [290.839622] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [290.839842] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [290.840135] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [290.840364] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [290.840588] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [290.840804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [290.841054] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [290.841068] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [290.841264] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [290.841379] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [290.841474] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [290.841646] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [290.841707] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [290.841899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [290.842104] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [290.842290] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [290.842476] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [290.842688] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing DPLL 0
<7> [290.842938] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [290.843095] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [290.843260] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [290.843412] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 173855 kHz -> 0 kHz
<7> [290.843599] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [290.843765] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [290.843927] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [290.844133] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]
<7> [290.844288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [290.844433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [290.844576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [290.844733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [290.844896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [290.845049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [290.845232] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [290.845380] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [290.845677] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [290.845807] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [291.054349] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [291.055003] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [291.058425] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [291.058789] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [291.058861] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [291.059127] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [291.059339] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [291.111521] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [291.111948] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [291.120235] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [291.120652] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:149:pipe A]
<7> [291.120772] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [291.121263] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [291.121950] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [291.122394] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [291.122815] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [291.123112] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [291.123367] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [291.123611] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [291.123859] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [291.124119] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [291.124412] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [291.124651] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [291.124874] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [291.125123] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [291.125349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [291.125573] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [291.125793] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [291.126058] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [291.126396] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [291.126643] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [291.126881] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [291.127343] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [291.127737] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [291.127998] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [291.128399] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [291.128643] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [291.130431] [IGT] kms_universal_plane: finished subtest pipe-A-eDP-1, SUCCESS
<6> [291.133571] [IGT] kms_universal_plane: starting dynamic subtest pipe-B-eDP-1
<7> [291.137801] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:429]
<7> [291.147107] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [291.147342] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [291.147528] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [291.150806] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [291.151052] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [291.151189] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [291.151328] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [291.165616] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430]
<7> [291.195816] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [291.219010] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [291.219345] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [291.219821] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]
<7> [291.221381] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [291.221402] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:391:eDP-1]
<7> [291.221451] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [291.221556] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:268:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [291.221644] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [291.221736] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [291.221826] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:268:pipe B]
<7> [291.221914] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [291.222000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [291.222174] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [291.222283] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [291.222380] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [291.222466] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [291.222544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [291.222629] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [291.222713] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [291.222797] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [291.222880] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [291.222959] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [291.223052] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [291.223154] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [291.223256] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [291.223358] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [291.223441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [291.223521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [291.223602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [291.223687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [291.223772] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [291.223855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [291.223932] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [291.224007] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [291.224115] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [291.224210] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [291.224303] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [291.224387] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [291.224460] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [291.224530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [291.224599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [291.224668] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [291.224737] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [291.224805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [291.224874] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [291.224942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [291.225010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [291.225121] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [291.225220] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [291.225444] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [291.225503] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x2
<7> [291.225574] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [291.225629] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [291.225682] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [291.225735] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [291.225788] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [291.225840] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [291.225904] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 1390840 num active planes 1
<7> [291.225984] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [291.226083] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [291.226190] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [291.226290] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [291.226377] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [291.226458] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 0 kHz -> 173855 kHz
<7> [291.226564] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [291.226646] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [291.226727] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [291.226820] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:268:pipe B] allocated DPLL 0
<7> [291.226900] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:268:pipe B] reserving DPLL 0
<7> [291.226984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: yes [modeset]
<7> [291.227095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [291.227198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [291.227296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [291.227377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [291.227450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [291.227522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [291.227594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [291.227665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [291.227736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [291.227808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [291.227877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [291.227948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [291.228026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [291.228115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [291.228206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [291.228295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [291.228371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [291.228439] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [291.228507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [291.228575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [291.228644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [291.228716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [291.228788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [291.228859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [291.228930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [291.228999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [291.229179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [291.229271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [291.229360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [291.229432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [291.229500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [291.229568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [291.229636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [291.229704] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [291.229771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [291.229840] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [291.229908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [291.229975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [291.230063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [291.230153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [291.230243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [291.230333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [291.230418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [291.230501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [291.230578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [291.230652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [291.230720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [291.230788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [291.230859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [291.230930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [291.231007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [291.231123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [291.231213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [291.231301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [291.231379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [291.231447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [291.231514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [291.231581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [FB:429] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [291.231650] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [291.231717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [291.231785] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [291.231852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [291.231919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [291.231986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [291.232101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [291.234862] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [291.235001] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [291.235178] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [291.235293] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [291.235387] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [291.235469] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [291.235539] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [291.235607] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [291.235674] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [291.235740] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [291.235801] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [291.235860] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [291.235917] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [291.235974] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [291.236040] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [291.236110] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [291.236190] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [291.236276] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [291.236377] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [291.236531] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [291.236591] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [291.236697] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [291.238481] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:268:pipe B]
<7> [291.238592] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [291.240298] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [291.240382] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (381 ms remaining)
<7> [291.382096] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [291.382101] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [291.382116] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [291.630245] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [291.671119] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [291.671448] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [291.671757] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [291.708518] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [291.709087] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [291.709526] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [291.710095] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [291.884673] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [291.885015] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [291.885352] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [291.887366] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [291.888649] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [291.889442] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [291.890562] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [291.891687] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [291.892781] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [291.893096] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [291.894499] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [291.894773] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [291.895579] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B
<7> [291.895937] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [291.896212] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B
<7> [291.896553] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [291.912819] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [291.914455] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [291.914825] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [291.923261] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [291.947611] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B
<7> [291.949141] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [291.949436] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [291.949708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84
<7> [291.950045] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85
<7> [292.079518] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x40
<7> [292.079800] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [292.097218] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: staged scaling request for 2780x1700->2880x1800 scaler_users = 0x40
<7> [292.097570] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:268:pipe B] attached scaler id 1.0 to PLANE:152
<7> [292.112950] [drm:__setplane_check] Invalid crtc for plane
<7> [292.112991] [drm:__setplane_check] Invalid crtc for plane
<7> [292.113077] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:430] from all active usage due to RMFB ioctl
<7> [292.113160] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:152:plane 1B] because [FB:430] is removed
<7> [292.113203] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:268:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [292.113470] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:152:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [292.113689] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [292.113907] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.114196] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.114412] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:152:plane 1B] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [292.114676] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:268:pipe B] data rate 0 num active planes 0
<7> [292.114994] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [292.115363] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [292.115673] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [292.116047] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [292.116359] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [292.117062] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [292.155708] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [292.155898] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [292.156316] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [292.156663] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [292.156996] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [292.157368] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [292.157707] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [292.158030] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [292.158356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [292.158659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [292.158962] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [292.159299] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [292.159647] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [292.159978] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [292.160327] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [292.160619] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [292.160906] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [292.161279] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [292.161565] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [292.161899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [292.162213] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [292.162477] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [292.162739] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [292.163059] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [292.163067] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.163323] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [292.163378] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.163596] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [292.163644] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.163846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [292.164240] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [292.164459] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [292.164693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [292.164892] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [292.165099] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [292.165286] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [292.165500] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [292.165684] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [292.165859] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [292.166032] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [292.166227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [292.166401] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:268:pipe B] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [292.166559] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:268:pipe B] fastset requirement not met, forcing full modeset
<7> [292.166718] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:268:pipe B] releasing DPLL 0
<7> [292.166938] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [292.167110] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:268:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0
<7> [292.167278] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:262:cursor B] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [292.167426] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:268:pipe B] min cdclk: 173855 kHz -> 0 kHz
<7> [292.167586] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [292.167737] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [292.167885] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [292.168060] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [modeset]
<7> [292.168222] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:152:plane 1B] fb: [NOFB], visible: no
<7> [292.168378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:182:plane 2B] fb: [NOFB], visible: no
<7> [292.168521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:212:plane 3B] fb: [NOFB], visible: no
<7> [292.168642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:242:plane 4B] fb: [NOFB], visible: no
<7> [292.168763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:252:plane 5B] fb: [NOFB], visible: no
<7> [292.168883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:262:cursor B] fb: [NOFB], visible: no
<7> [292.169057] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.169207] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.169552] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [292.169722] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [292.374254] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [292.374742] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [292.380400] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [292.380717] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [292.380849] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [292.381055] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [292.381328] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [292.433422] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [292.433868] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [292.438197] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [292.438553] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:268:pipe B]
<7> [292.438615] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [292.439114] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [292.439795] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [292.440235] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [292.440654] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [292.440928] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [292.441220] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [292.441468] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [292.441709] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [292.441943] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [292.442211] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [292.442447] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [292.442738] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [292.442993] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [292.443280] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [292.443505] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [292.443725] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [292.443949] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [292.444284] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [292.444515] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [292.444744] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [292.445243] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [292.445645] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [292.446003] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [292.446318] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [292.446652] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [292.446886] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [292.448571] [IGT] kms_universal_plane: finished subtest pipe-B-eDP-1, SUCCESS
<6> [292.451042] [IGT] kms_universal_plane: starting dynamic subtest pipe-C-eDP-1
<7> [292.453891] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:429]
<7> [292.465077] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [292.465250] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [292.465365] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [292.465479] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [292.472619] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [292.472841] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [292.472952] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [292.473069] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [292.489922] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:430]
<7> [292.520664] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:431]
<7> [292.548374] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [292.548545] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [292.548822] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [292.550552] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:149:pipe A]
<7> [292.553019] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:268:pipe B]
<7> [292.555417] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [292.555456] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:391:eDP-1]
<7> [292.555551] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [292.555806] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:387:pipe C] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [292.555926] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [292.556057] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] PSR2 not supported in transcoder C
<7> [292.556172] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [292.556286] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:387:pipe C]
<7> [292.556402] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [292.556513] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [292.556624] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [292.556733] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [292.556841] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [292.556957] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [292.557097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [292.557212] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [292.557326] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [292.557444] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [292.557565] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [292.557675] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [292.557781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [292.557886] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [292.557989] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [292.558100] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [292.558204] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [292.558304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [292.558403] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [292.558503] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [292.558603] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [292.558710] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [292.558815] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [292.558918] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [292.559030] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [292.559137] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [292.559240] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [292.559345] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [292.559451] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [292.559557] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [292.559660] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [292.559767] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [292.559876] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [292.559983] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [292.560098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [292.560208] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [292.560316] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [292.560424] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [292.560535] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [292.560695] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xd (total dbuf slices 0xf), mbus joined? no->no
<7> [292.560802] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:387:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x0 -> 0x4
<7> [292.560938] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 0) -> ( 0 - 2003), size 0 -> 2003
<7> [292.561042] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:381:cursor C] ddb ( 0 - 0) -> (2003 - 2048), size 0 -> 45
<7> [292.561128] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [292.561206] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [292.561283] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [292.561358] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [292.561461] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 1390840 num active planes 1
<7> [292.561592] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [292.561722] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [292.561839] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [292.561952] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [292.562069] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [292.562203] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:387:pipe C] min cdclk: 0 kHz -> 173855 kHz
<7> [292.562341] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [292.562455] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [292.562569] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [292.562713] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:387:pipe C] allocated DPLL 0
<7> [292.562819] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:387:pipe C] reserving DPLL 0
<7> [292.562925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: yes [modeset]
<7> [292.563059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [292.563174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 30, dithering: 0
<7> [292.563286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [292.563394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [292.563503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [292.563612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [292.563720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [292.563831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [292.563941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [292.564062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [292.564174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [292.564286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [292.564398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [292.564512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [292.564626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [292.564739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [292.564846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [292.564954] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [292.565129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [292.565242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [292.565355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [292.565465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [292.565578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [292.565688] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [292.565800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [292.565915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [292.566064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [292.566178] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [292.566286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [292.566393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [292.566500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [292.566606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [292.566712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [292.566820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [292.566928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [292.567055] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [292.567166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [292.567274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [292.567380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [292.567488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [292.567603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [292.567717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [292.567822] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [292.567926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [292.568054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [292.568167] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [292.568272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [292.568385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [292.568498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [292.568609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [292.568728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [292.568844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [292.568956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [292.569095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [292.569215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [292.569334] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [292.569450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [292.569563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:271:plane 1C] fb: [FB:429] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [292.569693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [292.569800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [292.569907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [292.570031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [292.570144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [292.570253] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [292.570369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [292.573428] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [292.573618] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [292.573793] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [292.573921] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [292.574042] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [292.574163] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [292.574254] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [292.574337] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [292.574424] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [292.574514] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [292.574599] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [292.574680] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [292.574762] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [292.574843] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [292.574927] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [292.575025] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [292.575113] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [292.575192] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [292.575296] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [292.575485] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [292.575616] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [292.576938] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x4, on? 0) for [CRTC:387:pipe C]
<7> [292.577077] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [292.578776] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [292.578876] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (360 ms remaining)
<7> [292.942106] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [293.038267] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [293.038640] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [293.038943] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [293.075496] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [293.075899] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [293.076225] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [293.076758] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [293.247315] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [293.247891] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [293.248416] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [293.250855] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [293.252260] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [293.253141] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [293.254388] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [293.255636] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [293.256843] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [293.257287] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [293.258785] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [293.259170] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [293.259960] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [293.260513] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [293.260891] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe C
<7> [293.261381] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [293.263371] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 10600448 bytes of contiguous stolen space for FBC, limit: 2
<7> [293.263793] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:271:plane 1C]
<7> [293.277342] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [293.279094] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [293.279585] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]
<7> [293.312628] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe C
<7> [293.315835] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [293.316184] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [293.316394] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84
<7> [293.316590] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85
<7> [293.460907] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: staged scaling request for 2783x1705->2880x1800 scaler_users = 0x1000
<7> [293.461410] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:271
<7> [293.496976] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: staged scaling request for 2780x1700->2880x1800 scaler_users = 0x1000
<7> [293.497520] xe 0000:00:02.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:387:pipe C] attached scaler id 2.0 to PLANE:271
<7> [293.527684] [drm:__setplane_check] Invalid crtc for plane
<7> [293.527755] [drm:__setplane_check] Invalid crtc for plane
<7> [293.527836] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:430] from all active usage due to RMFB ioctl
<7> [293.527969] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:271:plane 1C] because [FB:430] is removed
<7> [293.528101] xe 0000:00:02.0: [drm:skl_update_scaler [xe]] [CRTC:387:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [293.528546] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:271:plane 1C] ddb ( 0 - 2003) -> ( 0 - 0), size 2003 -> 0
<7> [293.528842] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [293.529162] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [293.529441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] blocks 23, 300, 300, 300, 300, 300, 0, 0, 37, 70, 84 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [293.529713] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:271:plane 1C] min_ddb 27, 331, 331, 331, 331, 331, 0, 0, 38, 78, 85 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [293.530087] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:387:pipe C] data rate 0 num active planes 0
<7> [293.530559] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [293.531041] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [293.531485] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [293.531922] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [293.532400] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [293.533697] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [293.543841] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:271:plane 1C]
<7> [293.570252] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:387:pipe C]
<7> [293.570458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [293.570839] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [293.571228] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [293.571589] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [293.571942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [293.572341] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [293.572750] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [293.573110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [293.573462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [293.573789] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [293.574145] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [293.574533] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [293.574913] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [293.575332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [293.575663] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [293.575999] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [293.576296] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [293.576584] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [293.576866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [293.577157] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [293.577419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [293.577666] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [293.577926] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [293.578195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [293.578464] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [293.578686] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [293.578901] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [293.579135] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [293.579379] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [293.579595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [293.579798] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [293.579995] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [293.580220] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [293.580418] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [293.580598] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [293.580769] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [293.580961] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [293.581168] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:387:pipe C] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [293.581328] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:387:pipe C] fastset requirement not met, forcing full modeset
<7> [293.581487] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:387:pipe C] releasing DPLL 0
<7> [293.581690] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [293.581833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:387:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x0
<7> [293.582020] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:381:cursor C] ddb (2003 - 2048) -> ( 0 - 0), size 45 -> 0
<7> [293.582185] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:387:pipe C] min cdclk: 173855 kHz -> 0 kHz
<7> [293.582344] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [293.582494] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [293.582638] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [293.582819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:387:pipe C] enable: no [modeset]
<7> [293.582993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:271:plane 1C] fb: [NOFB], visible: no
<7> [293.583135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:301:plane 2C] fb: [NOFB], visible: no
<7> [293.583264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:331:plane 3C] fb: [NOFB], visible: no
<7> [293.583393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:361:plane 4C] fb: [NOFB], visible: no
<7> [293.583517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:371:plane 5C] fb: [NOFB], visible: no
<7> [293.583635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:381:cursor C] fb: [NOFB], visible: no
<7> [293.584211] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [293.584328] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [293.790160] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 0
<7> [293.790923] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [293.794346] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power off
<7> [293.794690] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [293.794792] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [293.795051] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [293.795365] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [293.847301] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [293.847726] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - short
<7> [293.850789] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [293.851145] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x4, on? 1) for [CRTC:387:pipe C]
<7> [293.851168] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [293.851552] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [293.852290] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [293.852647] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [293.853025] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [293.853266] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [293.853506] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [293.853735] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [293.853952] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [293.854254] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [293.854498] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [293.854735] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [293.854994] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [293.855227] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [293.855454] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [293.855679] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [293.855951] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [293.856226] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [293.856548] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [293.856785] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [293.857276] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [293.857659] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [293.858060] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:387:pipe C]
<7> [293.858409] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [293.858813] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [293.859122] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [293.860955] [IGT] kms_universal_plane: finished subtest pipe-C-eDP-1, SUCCESS
<6> [293.862066] [IGT] kms_universal_plane: finished subtest universal-plane-sanity, SUCCESS
<7> [293.863513] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:391:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [293.863834] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:390:DDI A/PHY A][CRTC:149:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [293.864140] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [293.864433] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [293.864694] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:390:DDI A/PHY A] [CRTC:149:pipe A]
<7> [293.864945] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [293.865227] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [293.865461] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [293.865684] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [293.865891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [293.866161] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [293.866372] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [293.866597] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [293.866819] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [293.867010] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [293.867186] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [293.867371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [293.867572] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [293.867736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [293.867893] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [293.868065] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [293.868213] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [293.868359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [293.868503] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [293.868642] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [293.868776] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [293.868912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [293.869061] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [293.869189] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [293.869317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [293.869445] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [293.869569] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [293.869687] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [293.869806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [293.869926] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [293.870121] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [293.870239] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [293.870355] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [293.870468] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [293.870575] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [293.870680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [293.870781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [293.870893] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [293.871024] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [293.871192] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [293.871282] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [293.871372] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [293.871449] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [293.871520] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [293.871593] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [293.871664] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [293.871733] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [293.871823] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1390840 num active planes 1
<7> [293.871923] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [293.872031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [293.872122] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [293.872209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [293.872296] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [293.872383] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [293.872489] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [293.872573] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [293.872653] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [293.872747] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated DPLL 0
<7> [293.872823] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving DPLL 0
<7> [293.872903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]
<7> [293.872988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [293.873069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [293.873152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [293.873235] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [293.873312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [293.873386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [293.873458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [293.873529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [293.873600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [293.873669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [293.873740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [293.873810] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [293.873879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [293.873948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [293.874041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [293.874132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [293.874221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [293.874309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [293.874382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [293.874457] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [293.874531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [293.874600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [293.874669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [293.874737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [293.874806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [293.874874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [293.874943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [293.875026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [293.875102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [293.875176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [293.875257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [293.875344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [293.875424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [293.875504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [293.875574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [293.875645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [293.875716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [293.875785] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [293.875854] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [293.875923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [293.876004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [293.876081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [293.876155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [293.876229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [293.876299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [293.876367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [293.876436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [293.876502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [293.876569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [293.876640] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [293.876717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [293.876792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [293.876865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [293.876931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [293.877019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [293.877032] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [293.877096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [293.877169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [293.877168] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [293.877242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:392] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [293.877274] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [293.877317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [293.877385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [293.877403] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [293.877453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [293.877522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [293.877594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [293.877666] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [293.877740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [293.877883] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [293.877977] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [293.878227] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [293.878390] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [293.878532] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [293.878621] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [293.878706] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [293.878784] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:390:DDI A/PHY A]
<7> [293.878849] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:399:DDI TC1/PHY TC1]
<7> [293.878912] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DP-MST A]
<7> [293.879093] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:402:DP-MST B]
<7> [293.879190] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST C]
<7> [293.879280] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DDI TC2/PHY TC2]
<7> [293.879349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DP-MST A]
<7> [293.879409] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:414:DP-MST B]
<7> [293.879469] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST C]
<7> [293.879531] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DDI TC3/PHY TC3]
<7> [293.879590] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DP-MST A]
<7> [293.879646] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:422:DP-MST B]
<7> [293.879702] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST C]
<7> [293.879779] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [293.879931] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [293.880007] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [293.880128] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [293.881114] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:149:pipe A]
<7> [293.881246] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [293.882952] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turn panel power on
<7> [293.883054] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power cycle (469 ms remaining)
<7> [293.886668] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [293.886876] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [293.886967] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [293.887099] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [294.358244] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [294.399199] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [294.399497] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 wait for panel power on
<7> [294.399734] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [294.436326] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [294.436726] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:390:DDI A/PHY A] - long
<7> [294.437021] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [294.437448] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:390:DDI A/PHY A]
<7> [294.608972] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [294.609340] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 turning VDD on
<7> [294.609636] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:390:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [294.611641] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [294.612973] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [294.613759] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [294.614935] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [294.616082] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [294.617127] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Clock recovery OK
<7> [294.617439] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [294.619004] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [294.619452] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:391:eDP-1][ENCODER:390:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [294.620220] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [294.620717] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [294.621096] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [294.621462] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:391:eDP-1] set backlight PWM = 4518
<7> [294.637615] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [294.639298] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:391:eDP-1]
<7> [294.639644] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [294.642731] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [294.643672] [IGT] kms_universal_plane: exiting, ret=0
<6> [294.654982] Console: switching to colour frame buffer device 180x56
<7> [294.705059] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [294.705410] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [294.705687] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
|