Results for igt@kms_force_connector_basic@force-edid

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 0.03 seconds
Igt-Version 
IGT-Version: 2.3-gd9ef9597e (x86_64) (Linux: 6.19.0-rc2-lgci-xe-xe-4307-b4e44d7974614af6d+ x86_64)
Out 
Using IGT_SRANDOM=1766995893 for randomisation
Opened device: /dev/dri/card0
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.026s)
Err 
Starting subtest: force-edid
Subtest force-edid: SUCCESS (0.026s)
Dmesg
<6> [237.749948] Console: switching to colour dummy device 80x25
<6> [237.750518] [IGT] kms_force_connector_basic: executing
<7> [237.756056] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [237.756079] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.756094] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.760506] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [237.760605] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.760617] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.765001] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [237.765044] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.765052] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.769348] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [237.769835] [IGT] kms_force_connector_basic: starting subtest force-edid
<7> [237.770489] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 2 or reprobing
<7> [237.770517] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.770526] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.770980] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [237.771202] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [237.771585] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [237.771813] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [237.771835] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [237.772055] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [237.774329] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [237.774346] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [237.774601] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from disconnected to connected
<7> [237.774638] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [237.774775] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [237.774917] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [237.774927] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [237.774939] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [237.774948] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [237.774957] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [237.774965] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [237.775029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.775039] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.775474] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [237.775733] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [237.776133] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [237.776367] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [237.776385] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [237.776632] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [237.778920] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [237.778936] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [237.779301] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [237.779310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [237.779319] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [237.779327] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [237.779335] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [237.779343] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [237.779838] xe 0000:00:02.0: [drm:drm_edid_override_set] [CONNECTOR:550:HDMI-A-1] EDID override set
<7> [237.779888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.779899] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.780678] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD monitor IGT
<7> [237.780687] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:550:HDMI-A-1] ELD size 24, SAD count 0
<7> [237.780902] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [237.781167] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [237.781591] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0040 w(1)
<7> [237.781852] xe 0000:00:02.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [237.782136] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 (STALE)
<7> [237.782160] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5 (STALE)
<7> [237.782175] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [237.782185] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa
<7> [237.782195] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [237.782204] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [237.782213] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [237.782221] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [237.782516] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [237.782773] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.782784] xe 0000:00:02.0: [drm:intel_hdmi_force [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.783277] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [237.783612] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK on first message, retry
<7> [237.784021] xe 0000:00:02.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc4] NAK for addr: 0050 w(1)
<7> [237.784254] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [237.784273] xe 0000:00:02.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [237.784519] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc4. force bit now 1
<7> [237.786803] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc4
<7> [237.786820] xe 0000:00:02.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc4. force bit now 0
<7> [237.787056] xe 0000:00:02.0: [drm:drm_edid_connector_update] [CONNECTOR:550:HDMI-A-1] EDID changed, epoch counter 2
<7> [237.787197] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0xa (STALE)
<7> [237.787215] xe 0000:00:02.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5 (STALE)
<7> [237.787232] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] probed modes:
<7> [237.787240] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [237.787248] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [237.787256] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [237.787264] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "848x480": 60 33750 848 864 976 1088 480 486 494 517 0x40 0x5
<7> [237.787271] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [237.787621] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 2 to 0 or reprobing
<7> [237.787634] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.787646] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.791982] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] status updated from connected to disconnected
<7> [237.792003] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [237.792021] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [237.792133] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7> [237.792235] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.792245] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.796592] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<6> [237.797137] [IGT] kms_force_connector_basic: finished subtest force-edid, SUCCESS
<7> [237.799744] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [237.800817] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [237.810301] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7> [237.810316] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7> [237.810440] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [237.810454] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [237.811231] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [237.812491] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [237.812991] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [237.813272] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [237.813798] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [237.813811] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [237.813820] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [237.813827] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [237.813835] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [237.813872] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [237.814142] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [237.814408] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [237.815436] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [237.815448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [237.815459] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [237.815470] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [237.815480] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [237.815820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [237.815831] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [237.815840] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [237.816151] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [237.816161] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [237.816170] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [237.816477] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [237.816488] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.816509] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.820876] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [237.820887] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] enabled? yes
<7> [237.820897] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:DP-1] enabled? no
<7> [237.820905] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:532:DP-2] enabled? no
<7> [237.820912] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [237.820919] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-1] enabled? no
<7> [237.820974] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [237.821006] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:510:eDP-1] found preferred mode: 1920x1200
<7> [237.821014] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 1920x1200 config
<7> [237.821047] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:149:pipe A] desired mode 1920x1200 set (0,0)
<7> [237.826897] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7> [237.827753] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:510:eDP-1] force updated from 0 to 0 or reprobing
<7> [237.827768] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [237.827779] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [237.828530] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [237.829121] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [237.829389] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [237.829739] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [237.830052] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [237.830064] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [237.830072] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [237.830079] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [237.830087] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [237.830120] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [237.830383] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [237.830660] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [237.831687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [237.831698] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [237.831709] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [237.831773] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [237.831783] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [237.832456] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [237.832984] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [237.833246] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [237.833516] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [237.833814] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [237.833823] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [237.833830] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [237.833837] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [237.833844] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [237.833870] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [237.834128] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [237.834385] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [237.835439] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [237.835448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [237.835457] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [237.835706] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:510:eDP-1] EDID override reset
<7> [237.835748] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1]
<7> [237.835757] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:510:eDP-1]
<7> [237.836428] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [237.836970] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [237.837252] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000
<7> [237.837567] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000
<7> [237.837888] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Supported Monitor Refresh rate range is 30 Hz - 120 Hz
<7> [237.837898] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] DisplayID extension version 0x20, primary use 0x02
<7> [237.837905] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] Assigning EDID-1.4 digital sink color depth as 8 bpc.
<7> [237.837912] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD monitor
<7> [237.837919] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:510:eDP-1] ELD size 20, SAD count 0
<7> [237.837948] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] VRR capable: yes
<7> [237.838226] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [237.838517] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:510:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [237.839491] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:510:eDP-1] probed modes:
<7> [237.839512] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 120 317250 1920 1968 2000 2080 1200 1203 1209 1271 0x48 0xa
<7> [237.839521] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 317242 1920 1968 2000 2080 1200 1203 1209 2542 0x40 0xa
<7> [237.839763] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:519:DP-1] EDID override reset
<7> [237.839800] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1]
<7> [237.839809] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:519:DP-1]
<7> [237.840125] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:DP-1] disconnected
<7> [237.840333] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:532:DP-2] EDID override reset
<7> [237.840367] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2]
<7> [237.840375] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:532:DP-2]
<7> [237.840709] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:532:DP-2] disconnected
<7> [237.840901] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:541:DP-3] EDID override reset
<7> [237.840931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [237.840939] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [237.841216] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [237.841540] xe 0000:00:02.0: [drm:status_store] [CONNECTOR:550:HDMI-A-1] force updated from 0 to 0 or reprobing
<7> [237.841551] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.841560] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.844550] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [237.845077] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [237.845437] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [237.845884] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [237.845944] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.845953] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.850315] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [237.850547] xe 0000:00:02.0: [drm:drm_edid_override_reset] [CONNECTOR:550:HDMI-A-1] EDID override reset
<7> [237.850581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1]
<7> [237.850590] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-1]
<7> [237.854905] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-1] disconnected
<7> [237.857097] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [237.857435] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [237.860240] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [237.860683] [IGT] kms_force_connector_basic: exiting, ret=0
<6> [237.868790] Console: switching to colour frame buffer device 240x75
Created at 2025-12-29 08:23:01