igt@xe_pm@d3hot-mocs on shard-bmg@IGT

Detail	Value
Duration	3.29 seconds
Hostname	shard-bmg-2
Igt-Version	IGT-Version: 2.3-g90c27f636 (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4265-31985bb0a701138a0+ x86_64)
Out	Using IGT_SRANDOM=1766138896 for randomisation Opened device: /dev/dri/card0 Starting subtest: d3hot-mocs Subtest d3hot-mocs: SUCCESS (3.290s)
Err	Starting subtest: d3hot-mocs Subtest d3hot-mocs: SUCCESS (3.290s)
Dmesg	<6> [100.296458] Console: switching to colour dummy device 80x25 <6> [100.296581] [IGT] xe_pm: executing <6> [101.349823] [IGT] xe_pm: starting subtest d3hot-mocs <7> [101.354828] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [101.355500] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [101.356092] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [101.356655] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [101.357118] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [101.357217] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [101.357312] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [101.357482] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [101.357575] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [101.357667] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [101.357766] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [101.357860] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [101.357956] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [101.358056] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [101.358172] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [101.358251] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [101.358335] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [101.358468] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [101.358559] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [101.358648] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [101.358744] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [101.358837] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no) <7> [101.358929] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [101.359037] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [101.359138] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [101.359215] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2 <7> [101.359293] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2 <7> [101.359390] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0 <7> [101.359462] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0 <7> [101.359530] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [101.359599] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [101.359666] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [101.359731] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [101.359796] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037 <7> [101.359860] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59 <7> [101.359936] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0 <7> [101.360042] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [101.360130] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [101.360216] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [101.360317] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz <7> [101.360417] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2 <7> [101.360503] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2 <7> [101.360590] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [101.360691] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [101.360776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [101.360858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [101.360947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [101.361039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [101.361123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [101.361206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [101.361290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [101.361373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [101.361454] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [101.361535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [101.361616] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [101.361699] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [101.361785] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [101.361868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [101.361953] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [101.362041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [101.362128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [101.362209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [101.362291] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [101.362372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [101.362453] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [101.362534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [101.362615] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [101.362702] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [101.362788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [101.362872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [101.362966] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [101.363056] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [101.363138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [101.363219] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [101.363300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000 <7> [101.363381] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [101.363461] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [101.363542] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [101.363623] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [101.363703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [101.363784] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [101.363864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [101.363948] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [101.364034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [101.364125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [101.364208] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [101.364291] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [101.364372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [101.364453] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [101.364534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [101.364614] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [101.364694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [101.364775] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.364855] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.364936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.365034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [101.365114] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [101.365194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.365274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.365354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.365435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [101.365514] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [101.365595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [101.365676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [101.365756] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [101.365835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [101.365916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [101.366006] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [101.366095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [101.366917] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A] <7> [101.394278] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7> [101.395028] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7> [101.415193] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [101.418136] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A] <6> [101.419405] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [101.419310] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [101.420352] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2 <7> [101.421015] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [101.421344] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [101.421666] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [101.421991] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [101.422289] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [101.422586] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [101.422871] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [101.423177] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [101.423437] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [101.423707] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [101.423970] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [101.424207] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [101.424439] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [101.424671] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [101.424884] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [101.425116] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [101.426888] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B) <7> [101.427167] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [101.431564] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A <7> [101.432152] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2] <7> [101.432687] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [101.433774] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [101.434062] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [101.434362] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [101.434646] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [101.434924] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [101.435210] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [101.435536] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [101.435745] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [101.436049] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [101.436275] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [101.436514] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [101.436745] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [101.436973] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [101.437186] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [101.437472] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [101.437660] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [101.437859] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [101.438064] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no) <7> [101.438248] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [101.438380] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [101.438491] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no <7> [101.438576] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0 <7> [101.438675] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0 <7> [101.438755] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0 <7> [101.438836] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7> [101.438918] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [101.439007] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [101.439086] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7> [101.439173] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0 <7> [101.439278] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000 <7> [101.439379] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000 <7> [101.439476] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0 <7> [101.439583] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz <7> [101.439721] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3 <7> [101.439856] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3 <7> [101.439987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset] <7> [101.440122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [101.440252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [101.440379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [101.440501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [101.440609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [101.440714] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [101.440818] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [101.440919] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [101.441031] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [101.441033] xe 0000:03:00.0: colorspace: RGB <7> [101.441034] xe 0000:03:00.0: scan mode: Underscan <7> [101.441036] xe 0000:03:00.0: colorimetry: No Data <7> [101.441037] xe 0000:03:00.0: picture aspect: 16:9 <7> [101.441038] xe 0000:03:00.0: active aspect: Same as Picture <7> [101.441040] xe 0000:03:00.0: itc: No Data <7> [101.441041] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [101.441042] xe 0000:03:00.0: quantization range: Default <7> [101.441043] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [101.441044] xe 0000:03:00.0: video code: 16 <7> [101.441046] xe 0000:03:00.0: ycc quantization range: Full <7> [101.441047] xe 0000:03:00.0: hdmi content type: Graphics <7> [101.441048] xe 0000:03:00.0: pixel repeat: 0 <7> [101.441049] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [101.441051] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [101.441052] xe 0000:03:00.0: vendor: Intel <7> [101.441053] xe 0000:03:00.0: product: Discrete gfx <7> [101.441055] xe 0000:03:00.0: source device information: PC General (0x9) <7> [101.441056] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [101.441058] xe 0000:03:00.0: empty frame <7> [101.441059] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [101.441158] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [101.441257] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [101.441352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [101.441447] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [101.441541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [101.441637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [101.441731] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [101.441820] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [101.441909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [101.442006] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [101.442095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [101.442184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [101.442272] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [101.442360] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [101.442449] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [101.442537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [101.442625] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [101.442712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750 <7> [101.442800] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [101.442887] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [101.442980] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [101.443068] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [101.443156] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [101.443243] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [101.443331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [101.443419] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [101.443507] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [101.443595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [101.443682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [101.443771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [101.443858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [101.443950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [101.444041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [101.444128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [101.444216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [101.444304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.444393] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.444481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.444568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [101.444656] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [101.444744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.444831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.444919] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [101.445018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [101.445125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [101.445220] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no <7> [101.445308] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [101.445397] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [101.445485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [101.445574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [101.445664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [101.445757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [101.446422] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B] <7> [101.464992] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7> [101.465662] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B <7> [101.478390] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [101.487143] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B] <7> [101.489398] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3 <7> [101.490275] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [101.490764] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [101.491270] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [101.491738] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [101.492227] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [101.492675] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [101.493131] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [101.493535] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [101.493925] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [101.494349] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [101.494677] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [101.495012] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [101.495351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [101.495685] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [101.495999] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [101.496292] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [101.496804] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [101.497354] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: ) <7> [101.497804] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1 <7> [101.498592] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7> [101.498887] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7> [101.499380] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [101.499626] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <7> [101.522124] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [101.523135] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [101.523994] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [101.524782] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [101.525614] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [101.659546] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [101.660409] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [101.665252] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [101.669969] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [101.670562] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [101.671268] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [101.671963] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [101.676453] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [101.690856] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [101.693136] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [101.695071] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [101.700400] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [101.702159] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [101.712166] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [101.712361] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [101.712561] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [101.718854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.720848] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.722825] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.724835] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.726828] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.728856] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.730878] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.732918] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.737150] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.739234] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.741229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.743279] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.745267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.747274] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.749276] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.751248] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [101.753058] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [101.753072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [101.753077] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [101.753082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [101.753086] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [101.753091] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [101.753097] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [101.753103] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [101.753109] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [101.753135] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [101.753355] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [101.755001] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [101.755191] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [101.758068] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [101.758612] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [101.758702] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [101.759139] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [101.759226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [101.759230] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [101.759315] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [101.760666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [101.760669] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [101.760754] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [101.785952] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [101.785955] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [101.785957] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [101.785959] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [101.785961] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [101.785963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [101.785966] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [101.785968] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [101.785971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [101.786348] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [101.786435] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [101.786868] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [101.786964] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [101.786976] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [101.791141] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [101.866197] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [101.867158] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [101.867968] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [101.868702] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [101.869492] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <6> [101.974786] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0 <4> [101.974809] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID) <4> [101.974817] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000 <4> [101.974826] nvme 0000:05:00.0: [ 0] RxErr (First) <7> [101.987053] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [101.987692] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [101.992458] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [101.997219] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [101.997810] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [101.998548] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [101.999267] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [102.003494] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [102.017887] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [102.020265] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [102.022175] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [102.027596] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [102.029351] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [102.039290] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [102.039498] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [102.039700] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [102.046173] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.048203] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.050225] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.052259] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.054232] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.056291] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.058337] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.060297] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.064332] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.066346] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.068303] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.070305] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.072349] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.074353] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.076313] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.078347] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [102.080089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [102.080102] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [102.080106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [102.080110] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [102.080114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [102.080118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [102.080123] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [102.080128] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [102.080133] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [102.080157] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [102.080366] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [102.082046] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [102.082219] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [102.085014] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [102.085525] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [102.085614] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [102.086056] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [102.086146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [102.086150] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [102.086238] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [102.087587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [102.087590] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [102.087677] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [102.112783] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [102.112786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [102.112788] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [102.112790] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [102.112792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [102.112794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [102.112796] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [102.112799] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [102.112801] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [102.113176] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [102.113269] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [102.113711] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [102.113798] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [102.113809] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [102.117912] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [102.186222] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [102.187172] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [102.187962] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [102.188682] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [102.189463] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [103.008651] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [103.008781] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [103.013030] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [103.017380] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [103.017730] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [103.018313] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [103.018886] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [103.022012] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [103.032440] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [103.034072] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [103.035355] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [103.039307] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [103.040627] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [103.049752] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [103.050066] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [103.050274] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [103.055386] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.057206] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.059078] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.061060] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.063045] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.064957] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.066758] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.068590] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.072106] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.073996] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.075829] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.077824] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.079656] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.081625] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.083602] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.085610] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.087384] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [103.087402] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [103.087411] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [103.087419] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [103.087427] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [103.087435] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [103.087446] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [103.087455] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [103.087465] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [103.087504] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [103.087793] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [103.089086] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [103.089370] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [103.091636] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [103.092147] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [103.092236] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [103.092572] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [103.092664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [103.092668] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [103.092759] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [103.094005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [103.094008] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [103.094096] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [103.119058] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [103.119061] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [103.119063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [103.119065] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [103.119067] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [103.119069] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [103.119071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [103.119073] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [103.119075] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [103.119337] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [103.119416] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [103.119743] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [103.119822] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [103.119832] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [103.124063] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [103.194100] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [103.194977] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [103.195689] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [103.196401] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [103.197122] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [103.327076] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [103.327719] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [103.332403] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [103.337034] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [103.337676] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [103.338574] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [103.339504] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [103.343034] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [103.353824] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [103.355803] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [103.357284] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [103.361311] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [103.362645] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [103.372321] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [103.372548] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [103.372834] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [103.378926] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.380758] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.382760] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.384772] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.386783] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.388801] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.390818] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.392844] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.396815] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.398850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.400951] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.402818] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.404834] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.406880] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.408989] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.410849] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [103.412666] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [103.412694] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [103.412705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [103.412715] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [103.412725] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [103.412734] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [103.412747] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [103.412757] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [103.412769] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [103.412815] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [103.413099] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [103.414448] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [103.414843] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [103.417530] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [103.418146] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [103.418245] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [103.418583] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [103.418677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [103.418681] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [103.418767] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [103.420006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [103.420009] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [103.420096] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [103.445072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [103.445076] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [103.445078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [103.445080] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [103.445082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [103.445084] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [103.445087] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [103.445089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [103.445091] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [103.445248] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [103.445335] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [103.445660] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [103.445744] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [103.445755] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [103.449889] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [103.522257] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [103.523125] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7> [103.523780] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7> [103.524460] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7> [103.525104] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on <7> [104.344365] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on <7> [104.344997] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1] <7> [104.349573] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1] <7> [104.354294] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2] <7> [104.354978] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7> [104.355840] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7> [104.356823] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2 <7> [104.360736] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [104.371270] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [104.373130] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [104.374621] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000 <7> [104.378619] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11 <7> [104.379961] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST <7> [104.389653] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000 <7> [104.390084] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000 <7> [104.390200] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000 <7> [104.395607] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.397570] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.399548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.401549] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.403545] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.405542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.407409] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.409237] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.413040] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.415053] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.416917] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.418732] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.420714] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.422539] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.424393] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.426223] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer <7> [104.427788] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz <7> [104.427805] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30. <7> [104.427812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36. <7> [104.427817] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48. <7> [104.427823] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc. <7> [104.427828] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color. <7> [104.427836] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435 <7> [104.427843] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [104.427849] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3 <7> [104.427902] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no <7> [104.428256] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps <7> [104.429570] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 <7> [104.429798] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no <7> [104.432037] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2] <7> [104.432499] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [104.432693] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry <7> [104.433021] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1) <7> [104.433126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [104.433131] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging <7> [104.433217] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1 <7> [104.434463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2 <7> [104.434466] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0 <7> [104.434553] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3] <7> [104.459827] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz <7> [104.459831] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30. <7> [104.459833] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36. <7> [104.459835] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48. <7> [104.459837] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc. <7> [104.459839] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color. <7> [104.459842] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV <7> [104.459844] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0 <7> [104.459847] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3 <7> [104.460005] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [104.460100] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry <7> [104.460423] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1) <7> [104.460510] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6) <7> [104.460522] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3] <7> [104.464655] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4] <7> [104.468962] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [104.469072] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [104.469177] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [104.469277] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [104.469376] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [104.469475] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [104.469570] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [104.469698] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [104.469780] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [104.469978] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [104.470076] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [104.470169] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [104.470267] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [104.470363] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [104.470463] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [104.470559] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [104.470665] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [104.470744] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [104.470882] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000 <7> [104.470978] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000 <7> [104.471073] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [104.471168] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A] <7> [104.471263] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes) <7> [104.471356] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset <7> [104.471449] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2 <7> [104.471552] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7> [104.471632] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1 <7> [104.471726] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037 <7> [104.471800] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59 <7> [104.471881] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [104.471953] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [104.472024] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [104.472094] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [104.472176] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1 <7> [104.472275] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000 <7> [104.472370] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000 <7> [104.472461] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624 <7> [104.472565] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz <7> [104.472672] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2 <7> [104.472765] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2 <7> [104.472865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset] <7> [104.472964] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB <7> [104.473058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0 <7> [104.473153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [104.473247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [104.473339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [104.473431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [104.473522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64 <7> [104.473613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7> [104.473703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled <7> [104.473791] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7> [104.473883] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7> [104.473975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7> [104.474066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0 <7> [104.474162] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00 <7> [104.474253] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11 <7> [104.474343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00 <7> [104.474432] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [104.474521] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [104.474609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36 <7> [104.474698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125 <7> [104.474787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [104.474880] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [104.474969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [104.475058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [104.475146] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [104.475234] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [104.475322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [104.475410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [104.475498] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [104.475586] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [104.475673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [104.475762] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000 <7> [104.475849] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000 <7> [104.475950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [104.476045] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c <7> [104.476137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110 <7> [104.476227] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c <7> [104.476316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1 <7> [104.476404] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a <7> [104.476491] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81 <7> [104.476580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000 <7> [104.476668] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001 <7> [104.476756] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000 <7> [104.476844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [104.476943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000 <7> [104.477032] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00 <7> [104.477120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [104.477208] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [104.477295] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [104.477383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.477470] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.477559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.477647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [104.477735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [104.477822] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.477922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.478014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.478107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [104.478199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [104.478290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [104.478381] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [104.478470] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [104.478559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no <7> [104.478648] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no <7> [104.478735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no <7> [104.478824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no <7> [104.478921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no <7> [104.479322] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7> [104.479841] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <7> [104.480070] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [104.480160] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [104.480245] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [104.480328] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [104.480416] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [104.480501] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [104.480584] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [104.480664] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [104.480744] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [104.480824] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [104.480914] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [104.480993] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [104.481078] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [104.481161] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [104.481243] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [104.481322] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [104.481613] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7> [104.481773] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: ) <7> [104.482055] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes) <7> [104.482159] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A] <7> [104.482250] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2 <7> [104.487267] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [104.492364] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00 <7> [104.493458] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01 <7> [104.493844] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a <7> [104.495396] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7> [104.495971] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1 <7> [104.502819] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK <7> [104.503085] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3 <7> [104.509897] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful <7> [104.510261] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4 <7> [104.511876] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7> [104.529791] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD <7> [104.546462] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2] <7> [104.547315] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A] <7> [104.552144] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [104.552660] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [104.553252] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [104.553735] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [104.554237] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [104.554661] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [104.555195] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [104.555565] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [104.555911] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [104.556334] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [104.556490] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [104.556835] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <6> [104.557079] pcieport 0000:00:01.0: PME: Spurious native interrupt! <7> [104.557226] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [104.557554] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [104.557879] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [104.558175] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [104.558586] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [104.558879] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [104.559153] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [104.559416] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [104.559682] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [104.559972] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [104.560240] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [104.560444] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [104.560633] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [104.560948] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36) <7> [104.561143] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0 <7> [104.561359] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B] <7> [104.561573] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes) <7> [104.561763] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset <7> [104.561961] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3 <7> [104.562168] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no <7> [104.562327] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [104.562496] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3 <7> [104.562676] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989 <7> [104.562812] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59 <7> [104.562950] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989 <7> [104.563072] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59 <7> [104.563189] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0,wm1,wm2,wm3,wm4,wm5, wm6, wm7,twm,swm,stwm <7> [104.563304] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 <7> [104.563418] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 <7> [104.563531] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 <7> [104.563660] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1 <7> [104.563814] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000 <7> [104.563967] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000 <7> [104.564102] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248 <7> [104.564248] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz <7> [104.564390] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3 <7> [104.564522] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3 <7> [104.564652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset] <7> [104.564781] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB <7> [104.564912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0 <7> [104.565029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid> <7> [104.565145] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0 <7> [104.565258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7> [104.565366] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7> [104.565473] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71 <7> [104.565579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6 <7> [104.565684] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13 <7> [104.565686] xe 0000:03:00.0: colorspace: RGB <7> [104.565687] xe 0000:03:00.0: scan mode: Underscan <7> [104.565688] xe 0000:03:00.0: colorimetry: No Data <7> [104.565690] xe 0000:03:00.0: picture aspect: 16:9 <7> [104.565691] xe 0000:03:00.0: active aspect: Same as Picture <7> [104.565692] xe 0000:03:00.0: itc: No Data <7> [104.565693] xe 0000:03:00.0: extended colorimetry: xvYCC 601 <7> [104.565694] xe 0000:03:00.0: quantization range: Default <7> [104.565696] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling <7> [104.565697] xe 0000:03:00.0: video code: 16 <7> [104.565698] xe 0000:03:00.0: ycc quantization range: Full <7> [104.565699] xe 0000:03:00.0: hdmi content type: Graphics <7> [104.565701] xe 0000:03:00.0: pixel repeat: 0 <7> [104.565702] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0 <7> [104.565704] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25 <7> [104.565705] xe 0000:03:00.0: vendor: Intel <7> [104.565706] xe 0000:03:00.0: product: Discrete gfx <7> [104.565708] xe 0000:03:00.0: source device information: PC General (0x9) <7> [104.565709] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4 <7> [104.565711] xe 0000:03:00.0: empty frame <7> [104.565712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00 <7> [104.565811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51 <7> [104.565918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00 <7> [104.566014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7> [104.566110] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7> [104.566207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36 <7> [104.566303] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125 <7> [104.566399] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [104.566498] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5 <7> [104.566598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [104.566697] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 <7> [104.566793] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5 <7> [104.566896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000 <7> [104.566992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0 <7> [104.567088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7> [104.567184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7> [104.567279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7> [104.567373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no <7> [104.567469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750 <7> [104.567563] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000 <7> [104.567657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000 <7> [104.567751] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8 <7> [104.567844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20 <7> [104.567950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06 <7> [104.568044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c <7> [104.568138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000 <7> [104.568231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000 <7> [104.568327] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200 <7> [104.568424] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff <7> [104.568520] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400 <7> [104.568616] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000 <7> [104.568710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001 <7> [104.568803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00 <7> [104.568912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7> [104.569007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7> [104.569102] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7> [104.569201] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.569297] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.569394] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.569490] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7> [104.569586] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7> [104.569681] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.569777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.569875] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7> [104.569971] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7> [104.570066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7> [104.570163] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7> [104.570264] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7> [104.570362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0 <7> [104.570463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no <7> [104.570559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no <7> [104.570654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no <7> [104.570749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no <7> [104.570846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no <7> [104.571645] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7> [104.571804] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F] <7> [104.571910] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A] <7> [104.572002] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B] <7> [104.572095] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C] <7> [104.572185] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D] <7> [104.572275] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G] <7> [104.572361] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A] <7> [104.572446] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B] <7> [104.572530] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C] <7> [104.572613] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D] <7> [104.572696] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H] <7> [104.572787] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I] <7> [104.572880] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A] <7> [104.572971] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B] <7> [104.573062] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C] <7> [104.573150] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D] <7> [104.579205] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no) <7> [104.579512] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A) <7> [104.595951] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B] <7> [104.596117] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3 <7> [104.598653] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B <7> [104.617332] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 36 bytes ELD <7> [104.618106] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2 <7> [104.631599] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7> [104.633906] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000) <7> [104.634428] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N <7> [104.635371] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3] <7> [104.636134] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B] <6> [104.641445] [IGT] xe_pm: finished subtest d3hot-mocs, SUCCESS <7> [104.663841] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0 <6> [104.664528] [IGT] xe_pm: exiting, ret=0 <6> [104.685173] Console: switching to colour frame buffer device 240x67

<6> [100.296458] Console: switching to colour dummy device 80x25

<6> [101.349823] [IGT] xe_pm: starting subtest d3hot-mocs

<7> [101.354828] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [101.355500] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [101.356092] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [101.356655] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [101.357118] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [101.357217] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [101.357312] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [101.357482] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [101.357575] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [101.357667] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [101.357766] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [101.357860] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [101.357956] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [101.358056] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [101.358172] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [101.358251] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [101.358335] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [101.358468] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [101.358559] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [101.358648] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [101.358744] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [101.358837] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)

<7> [101.358929] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [101.359037] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [101.359138] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [101.359215] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x2

<7> [101.359293] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x2

<7> [101.359390] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0

<7> [101.359462] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0

<7> [101.359530] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [101.359599] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [101.359666] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [101.359731] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [101.359796] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037

<7> [101.359860] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59

<7> [101.359936] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0

<7> [101.360042] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [101.360130] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [101.360216] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [101.360317] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 9282 kHz

<7> [101.360417] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2

<7> [101.360503] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2

<7> [101.360590] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [101.360691] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [101.360776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [101.360858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [101.360947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [101.361039] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [101.361123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [101.361206] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [101.361290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [101.361373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [101.361454] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [101.361535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [101.361616] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [101.361699] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [101.361785] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [101.361868] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [101.361953] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [101.362041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [101.362128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [101.362209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [101.362291] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [101.362372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [101.362453] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [101.362534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [101.362615] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [101.362702] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [101.362788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [101.362872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [101.362966] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [101.363056] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [101.363138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [101.363219] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [101.363300] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000

<7> [101.363381] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [101.363461] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [101.363542] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [101.363623] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [101.363703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [101.363784] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [101.363864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [101.363948] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [101.364034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [101.364125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [101.364208] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [101.364291] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [101.364372] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [101.364453] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [101.364534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [101.364614] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [101.364694] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [101.364775] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.364855] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.364936] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.365034] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [101.365114] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [101.365194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.365274] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.365354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.365435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [101.365514] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [101.365595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [101.365676] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [101.365756] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [101.365835] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [101.365916] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [101.366006] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [101.366095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [101.366917] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A]

<7> [101.394278] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E

<7> [101.395028] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A

<7> [101.415193] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [101.418136] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A]

<6> [101.419405] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [101.419310] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [101.420352] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2

<7> [101.421015] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [101.421344] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [101.421666] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [101.421991] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [101.422289] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [101.422586] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [101.422871] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [101.423177] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [101.423437] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [101.423707] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [101.423970] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [101.424207] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [101.424439] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [101.424671] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [101.424884] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [101.425116] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [101.426888] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: B)

<7> [101.427167] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [101.431564] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A

<7> [101.432152] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]

<7> [101.432687] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [101.433774] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [101.434062] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [101.434362] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [101.434646] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [101.434924] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [101.435210] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [101.435536] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [101.435745] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [101.436049] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [101.436275] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [101.436514] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [101.436745] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [101.436973] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [101.437186] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [101.437472] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [101.437660] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [101.437859] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [101.438064] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)

<7> [101.438248] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [101.438380] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [101.438491] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no

<7> [101.438576] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0

<7> [101.438675] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0

<7> [101.438755] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0

<7> [101.438836] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm

<7> [101.438918] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [101.439007] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [101.439086] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0

<7> [101.439173] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0

<7> [101.439278] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000

<7> [101.439379] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000

<7> [101.439476] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0

<7> [101.439583] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 0 kHz

<7> [101.439721] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3

<7> [101.439856] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3

<7> [101.439987] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]

<7> [101.440122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [101.440252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [101.440379] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [101.440501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [101.440609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [101.440714] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [101.440818] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [101.440919] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [101.441031] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [101.441033] xe 0000:03:00.0: colorspace: RGB

<7> [101.441034] xe 0000:03:00.0: scan mode: Underscan

<7> [101.441036] xe 0000:03:00.0: colorimetry: No Data

<7> [101.441037] xe 0000:03:00.0: picture aspect: 16:9

<7> [101.441038] xe 0000:03:00.0: active aspect: Same as Picture

<7> [101.441040] xe 0000:03:00.0: itc: No Data

<7> [101.441041] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [101.441042] xe 0000:03:00.0: quantization range: Default

<7> [101.441043] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [101.441044] xe 0000:03:00.0: video code: 16

<7> [101.441046] xe 0000:03:00.0: ycc quantization range: Full

<7> [101.441047] xe 0000:03:00.0: hdmi content type: Graphics

<7> [101.441048] xe 0000:03:00.0: pixel repeat: 0

<7> [101.441049] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [101.441051] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [101.441052] xe 0000:03:00.0: vendor: Intel

<7> [101.441053] xe 0000:03:00.0: product: Discrete gfx

<7> [101.441055] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [101.441056] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [101.441059] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [101.441158] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [101.441257] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [101.441352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [101.441447] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [101.441541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [101.441637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [101.441731] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [101.441820] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [101.441909] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [101.442006] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [101.442095] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [101.442184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [101.442272] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [101.442360] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [101.442449] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [101.442537] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [101.442625] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [101.442712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750

<7> [101.442800] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [101.442887] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [101.442980] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [101.443068] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [101.443156] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [101.443243] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [101.443331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [101.443419] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [101.443507] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [101.443595] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [101.443682] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [101.443771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [101.443858] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [101.443950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [101.444041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [101.444128] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [101.444216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [101.444304] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.444393] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.444481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.444568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [101.444656] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [101.444744] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.444831] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.444919] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [101.445018] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [101.445125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [101.445220] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no

<7> [101.445308] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [101.445397] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [101.445485] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [101.445574] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [101.445664] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [101.445757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [101.446422] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B]

<7> [101.464992] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F

<7> [101.465662] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B

<7> [101.478390] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [101.487143] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B]

<7> [101.489398] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3

<7> [101.490275] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [101.490764] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [101.491270] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [101.491738] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [101.492227] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [101.492675] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [101.493131] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [101.493535] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [101.493925] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [101.494349] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [101.494677] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [101.495012] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [101.495351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [101.495685] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [101.495999] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [101.496292] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [101.496804] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [101.497354] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)

<7> [101.497804] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1

<7> [101.498592] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B

<7> [101.498887] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2

<7> [101.499380] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [101.499626] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<7> [101.522124] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [101.523135] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [101.523994] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [101.524782] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [101.525614] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [101.659546] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [101.660409] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [101.665252] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [101.669969] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [101.670562] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [101.671268] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [101.671963] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [101.676453] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [101.690856] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [101.693136] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [101.695071] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [101.700400] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [101.702159] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [101.712166] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [101.712361] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [101.712561] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [101.718854] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.720848] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.722825] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.724835] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.726828] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.728856] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.730878] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.732918] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.737150] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.739234] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.741229] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.743279] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.745267] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.747274] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.749276] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.751248] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [101.753058] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [101.753072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [101.753077] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [101.753082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [101.753086] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [101.753091] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [101.753097] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [101.753103] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [101.753109] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [101.753135] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [101.753355] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [101.755001] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [101.755191] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [101.758068] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [101.758612] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [101.758702] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [101.759139] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [101.759226] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [101.759230] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [101.759315] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [101.760666] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [101.760669] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [101.760754] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [101.785952] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [101.785955] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [101.785957] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [101.785959] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [101.785961] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [101.785963] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [101.785966] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [101.785968] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [101.785971] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [101.786348] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [101.786435] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [101.786868] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [101.786964] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [101.786976] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [101.791141] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [101.866197] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [101.867158] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [101.867968] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [101.868702] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [101.869492] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<6> [101.974786] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:05:00.0

<4> [101.974809] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)

<4> [101.974817] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000

<4> [101.974826] nvme 0000:05:00.0: [ 0] RxErr (First)

<7> [101.987053] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [101.987692] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [101.992458] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [101.997219] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [101.997810] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [101.998548] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [101.999267] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [102.003494] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [102.017887] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [102.020265] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [102.022175] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [102.027596] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [102.029351] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [102.039290] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [102.039498] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [102.039700] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [102.046173] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.048203] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.050225] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.052259] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.054232] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.056291] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.058337] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.060297] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.064332] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.066346] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.068303] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.070305] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.072349] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.074353] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.076313] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.078347] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [102.080089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [102.080102] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [102.080106] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [102.080110] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [102.080114] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [102.080118] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [102.080123] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [102.080128] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [102.080133] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [102.080157] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [102.080366] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [102.082046] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [102.082219] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [102.085014] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [102.085525] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [102.085614] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [102.086056] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [102.086146] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [102.086150] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [102.086238] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [102.087587] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [102.087590] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [102.087677] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [102.112783] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [102.112786] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [102.112788] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [102.112790] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [102.112792] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [102.112794] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [102.112796] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [102.112799] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [102.112801] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [102.113176] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [102.113269] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [102.113711] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [102.113798] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [102.113809] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [102.117912] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [102.186222] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [102.187172] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [102.187962] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [102.188682] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [102.189463] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [103.008651] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [103.008781] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [103.013030] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [103.017380] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [103.017730] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [103.018313] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [103.018886] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [103.022012] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [103.032440] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [103.034072] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [103.035355] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [103.039307] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [103.040627] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [103.049752] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [103.050066] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [103.050274] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [103.055386] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.057206] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.059078] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.061060] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.063045] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.064957] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.066758] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.068590] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.072106] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.073996] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.075829] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.077824] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.079656] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.081625] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.083602] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.085610] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.087384] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [103.087402] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [103.087411] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [103.087419] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [103.087427] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [103.087435] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [103.087446] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [103.087455] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [103.087465] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [103.087504] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [103.087793] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [103.089086] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [103.089370] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [103.091636] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [103.092147] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [103.092236] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [103.092572] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [103.092664] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [103.092668] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [103.092759] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [103.094005] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [103.094008] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [103.094096] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [103.119058] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [103.119061] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [103.119063] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [103.119065] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [103.119067] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [103.119069] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [103.119071] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [103.119073] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [103.119075] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [103.119337] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [103.119416] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [103.119743] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [103.119822] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [103.119832] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [103.124063] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [103.194100] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [103.194977] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [103.195689] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [103.196401] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [103.197122] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [103.327076] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [103.327719] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [103.332403] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [103.337034] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [103.337676] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [103.338574] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [103.339504] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [103.343034] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [103.353824] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [103.355803] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [103.357284] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [103.361311] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [103.362645] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [103.372321] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [103.372548] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [103.372834] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [103.378926] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.380758] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.382760] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.384772] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.386783] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.388801] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.390818] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.392844] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.396815] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.398850] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.400951] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.402818] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.404834] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.406880] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.408989] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.410849] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [103.412666] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [103.412694] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [103.412705] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [103.412715] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [103.412725] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [103.412734] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [103.412747] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [103.412757] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [103.412769] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [103.412815] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [103.413099] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [103.414448] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [103.414843] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [103.417530] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [103.418146] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [103.418245] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [103.418583] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [103.418677] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [103.418681] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [103.418767] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [103.420006] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [103.420009] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [103.420096] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [103.445072] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [103.445076] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [103.445078] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [103.445080] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [103.445082] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [103.445084] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [103.445087] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [103.445089] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [103.445091] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [103.445248] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [103.445335] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [103.445660] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [103.445744] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [103.445755] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [103.449889] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [103.522257] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [103.523125] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off

<7> [103.523780] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6

<7> [103.524460] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02

<7> [103.525104] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on

<7> [104.344365] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on

<7> [104.344997] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]

<7> [104.349573] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]

<7> [104.354294] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]

<7> [104.354978] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off

<7> [104.355840] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00

<7> [104.356823] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2

<7> [104.360736] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [104.371270] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [104.373130] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [104.374621] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 0.0 SW-rev 199.85 quirks 0x0000

<7> [104.378619] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11

<7> [104.379961] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST

<7> [104.389653] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000

<7> [104.390084] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000

<7> [104.390200] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000

<7> [104.395607] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.397570] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.399548] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.401549] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.403545] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.405542] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.407409] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.409237] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.413040] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.415053] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.416917] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.418732] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.420714] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.422539] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.424393] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.426223] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer

<7> [104.427788] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz

<7> [104.427805] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.

<7> [104.427812] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.

<7> [104.427817] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.

<7> [104.427823] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.

<7> [104.427828] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.

<7> [104.427836] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435

<7> [104.427843] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [104.427849] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3

<7> [104.427902] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no

<7> [104.428256] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps

<7> [104.429570] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00

<7> [104.429798] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no

<7> [104.432037] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]

<7> [104.432499] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [104.432693] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry

<7> [104.433021] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)

<7> [104.433126] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [104.433131] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging

<7> [104.433217] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1

<7> [104.434463] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2

<7> [104.434466] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0

<7> [104.434553] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [104.459827] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 0, max TMDS clock 590000 kHz

<7> [104.459831] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.

<7> [104.459833] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.

<7> [104.459835] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 48.

<7> [104.459837] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 16 bpc.

<7> [104.459839] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.

<7> [104.459842] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor Mi TV

<7> [104.459844] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0

<7> [104.459847] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 3

<7> [104.460005] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [104.460100] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry

<7> [104.460423] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)

<7> [104.460510] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)

<7> [104.460522] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]

<7> [104.464655] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]

<7> [104.468962] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [104.469072] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [104.469177] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [104.469277] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [104.469376] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [104.469475] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [104.469570] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [104.469698] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [104.469780] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [104.469978] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [104.470076] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [104.470169] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [104.470267] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [104.470363] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [104.470463] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [104.470559] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [104.470665] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [104.470744] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [104.470882] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000

<7> [104.470978] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000

<7> [104.471073] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [104.471168] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]

<7> [104.471263] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)

<7> [104.471356] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset

<7> [104.471449] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2

<7> [104.471552] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes

<7> [104.471632] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1

<7> [104.471726] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037

<7> [104.471800] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59

<7> [104.471881] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [104.471953] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [104.472024] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [104.472094] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [104.472176] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1

<7> [104.472275] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000

<7> [104.472370] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000

<7> [104.472461] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624

<7> [104.472565] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 9282 kHz

<7> [104.472672] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2

<7> [104.472765] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2

<7> [104.472865] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]

<7> [104.472964] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB

<7> [104.473058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0

<7> [104.473153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [104.473247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [104.473339] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [104.473431] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [104.473522] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64

<7> [104.473613] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0

<7> [104.473703] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled

<7> [104.473791] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled

<7> [104.473883] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled

<7> [104.473975] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0

<7> [104.474066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0

<7> [104.474162] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00

<7> [104.474253] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11

<7> [104.474343] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00

<7> [104.474432] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [104.474521] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [104.474609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36

<7> [104.474698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125

<7> [104.474787] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [104.474880] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [104.474969] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [104.475058] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [104.475146] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [104.475234] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [104.475322] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [104.475410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [104.475498] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [104.475586] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [104.475673] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [104.475762] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000

<7> [104.475849] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000

<7> [104.475950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [104.476045] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c

<7> [104.476137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110

<7> [104.476227] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c

<7> [104.476316] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1

<7> [104.476404] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a

<7> [104.476491] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81

<7> [104.476580] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000

<7> [104.476668] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001

<7> [104.476756] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000

<7> [104.476844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [104.476943] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000

<7> [104.477032] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00

<7> [104.477120] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [104.477208] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [104.477295] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [104.477383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.477470] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.477559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.477647] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [104.477735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [104.477822] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.477922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.478014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.478107] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [104.478199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [104.478290] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [104.478381] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [104.478470] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [104.478559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no

<7> [104.478648] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no

<7> [104.478735] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no

<7> [104.478824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no

<7> [104.478921] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no

<7> [104.479322] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A

<7> [104.479841] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2

<7> [104.480070] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [104.480160] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [104.480245] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [104.480328] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [104.480416] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [104.480501] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [104.480584] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [104.480664] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [104.480744] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [104.480824] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [104.480914] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [104.480993] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [104.481078] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [104.481161] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [104.481243] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [104.481322] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [104.481613] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf

<7> [104.481773] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)

<7> [104.482055] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)

<7> [104.482159] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A]

<7> [104.482250] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2

<7> [104.487267] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [104.492364] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00

<7> [104.493458] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01

<7> [104.493844] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a

<7> [104.495396] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0

<7> [104.495971] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1

<7> [104.502819] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK

<7> [104.503085] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3

<7> [104.509897] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful

<7> [104.510261] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4

<7> [104.511876] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A

<7> [104.529791] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD

<7> [104.546462] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]

<7> [104.547315] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]

<7> [104.552144] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [104.552660] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [104.553252] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [104.553735] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [104.554237] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [104.554661] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [104.555195] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [104.555565] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [104.555911] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [104.556334] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [104.556490] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [104.556835] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<6> [104.557079] pcieport 0000:00:01.0: PME: Spurious native interrupt!

<7> [104.557226] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [104.557554] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [104.557879] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [104.558175] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [104.558586] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [104.558879] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [104.559153] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [104.559416] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [104.559682] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [104.559972] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [104.560240] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [104.560444] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [104.560633] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [104.560948] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)

<7> [104.561143] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0

<7> [104.561359] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]

<7> [104.561573] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)

<7> [104.561763] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset

<7> [104.561961] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3

<7> [104.562168] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? yes->no

<7> [104.562327] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x3, ddb (0 - 4096) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [104.562496] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x1 -> 0x3

<7> [104.562676] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 1989), size 4037 -> 1989

<7> [104.562812] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> (1989 - 2048), size 59 -> 59

<7> [104.562950] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989

<7> [104.563072] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59

<7> [104.563189] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm

<7> [104.563304] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0

<7> [104.563418] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255

<7> [104.563531] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267

<7> [104.563660] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1

<7> [104.563814] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000

<7> [104.563967] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000

<7> [104.564102] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248

<7> [104.564248] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz

<7> [104.564390] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3

<7> [104.564522] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3

<7> [104.564652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]

<7> [104.564781] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB

<7> [104.564912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0

<7> [104.565029] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>

<7> [104.565145] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0

<7> [104.565258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0

<7> [104.565366] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0

<7> [104.565473] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71

<7> [104.565579] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6

<7> [104.565684] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13

<7> [104.565686] xe 0000:03:00.0: colorspace: RGB

<7> [104.565687] xe 0000:03:00.0: scan mode: Underscan

<7> [104.565688] xe 0000:03:00.0: colorimetry: No Data

<7> [104.565690] xe 0000:03:00.0: picture aspect: 16:9

<7> [104.565691] xe 0000:03:00.0: active aspect: Same as Picture

<7> [104.565692] xe 0000:03:00.0: itc: No Data

<7> [104.565693] xe 0000:03:00.0: extended colorimetry: xvYCC 601

<7> [104.565694] xe 0000:03:00.0: quantization range: Default

<7> [104.565696] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling

<7> [104.565697] xe 0000:03:00.0: video code: 16

<7> [104.565698] xe 0000:03:00.0: ycc quantization range: Full

<7> [104.565699] xe 0000:03:00.0: hdmi content type: Graphics

<7> [104.565701] xe 0000:03:00.0: pixel repeat: 0

<7> [104.565702] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0

<7> [104.565704] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25

<7> [104.565705] xe 0000:03:00.0: vendor: Intel

<7> [104.565706] xe 0000:03:00.0: product: Discrete gfx

<7> [104.565708] xe 0000:03:00.0: source device information: PC General (0x9)

<7> [104.565709] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4

<7> [104.565712] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 65 32 00 01 00 00 00 00 00 00 00 00

<7> [104.565811] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 4d 69 20 54 56 09 07 07 11 17 50 51

<7> [104.565918] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 07 00 00 00

<7> [104.566014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1

<7> [104.566110] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0

<7> [104.566207] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 41, vsync end: 36

<7> [104.566303] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125

<7> [104.566399] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [104.566498] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5

<7> [104.566598] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [104.566697] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5

<7> [104.566793] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5

<7> [104.566896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000

<7> [104.566992] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0

<7> [104.567088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0

<7> [104.567184] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no

<7> [104.567279] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0

<7> [104.567373] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no

<7> [104.567469] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750

<7> [104.567563] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000

<7> [104.567657] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000

<7> [104.567751] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8

<7> [104.567844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20

<7> [104.567950] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06

<7> [104.568044] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c

<7> [104.568138] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000

<7> [104.568231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000

<7> [104.568327] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200

<7> [104.568424] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff

<7> [104.568520] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400

<7> [104.568616] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000

<7> [104.568710] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001

<7> [104.568803] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00

<7> [104.568912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0

<7> [104.569007] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries

<7> [104.569102] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000

<7> [104.569201] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.569297] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.569394] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.569490] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000

<7> [104.569586] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000

<7> [104.569681] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.569777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.569875] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000

<7> [104.569971] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000

<7> [104.570066] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0

<7> [104.570163] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes

<7> [104.570264] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0

<7> [104.570362] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0

<7> [104.570463] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no

<7> [104.570559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no

<7> [104.570654] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no

<7> [104.570749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no

<7> [104.570846] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no

<7> [104.571645] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B

<7> [104.571804] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]

<7> [104.571910] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]

<7> [104.572002] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]

<7> [104.572095] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]

<7> [104.572185] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]

<7> [104.572275] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]

<7> [104.572361] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]

<7> [104.572446] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]

<7> [104.572530] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]

<7> [104.572613] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]

<7> [104.572696] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]

<7> [104.572787] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]

<7> [104.572880] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]

<7> [104.572971] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]

<7> [104.573062] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]

<7> [104.573150] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]

<7> [104.579205] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)

<7> [104.579512] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: A)

<7> [104.595951] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B]

<7> [104.596117] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3

<7> [104.598653] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B

<7> [104.617332] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 36 bytes ELD

<7> [104.618106] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2

<7> [104.631599] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010

<7> [104.633906] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)

<7> [104.634428] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N

<7> [104.635371] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]

<7> [104.636134] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]

<6> [104.641445] [IGT] xe_pm: finished subtest d3hot-mocs, SUCCESS

<7> [104.663841] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0

<6> [104.685173] Console: switching to colour frame buffer device 240x67

Results for igt@xe_pm@d3hot-mocs