Result:
i915_display_info14 igt_runner14 results14.json results14-xe-load.json guc_logs14.tar i915_display_info_post_exec14 boot14 dmesg14
| Detail | Value |
|---|---|
| Duration | 4.14 seconds |
| Hostname |
shard-bmg-9 |
| Igt-Version |
IGT-Version: 2.3-g829d402dc (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4265-31985bb0a701138a0+ x86_64) |
| Out |
Using IGT_SRANDOM=1766130995 for randomisation Opened device: /dev/dri/card0 Starting subtest: plane-scaler-with-clipping-clamping-pixel-formats Starting dynamic subtest: pipe-A Trying on DP-2 Dynamic subtest pipe-A: SUCCESS (1.722s) Starting dynamic subtest: pipe-B Trying on DP-2 Dynamic subtest pipe-B: SUCCESS (1.802s) Starting dynamic subtest: pipe-C Trying on DP-2 Dynamic subtest pipe-C: SUCCESS (0.298s) Starting dynamic subtest: pipe-D Trying on DP-2 Dynamic subtest pipe-D: SUCCESS (0.302s) Subtest plane-scaler-with-clipping-clamping-pixel-formats: SUCCESS (4.137s) |
| Err |
Starting subtest: plane-scaler-with-clipping-clamping-pixel-formats Starting dynamic subtest: pipe-A Dynamic subtest pipe-A: SUCCESS (1.722s) Starting dynamic subtest: pipe-B Dynamic subtest pipe-B: SUCCESS (1.802s) Starting dynamic subtest: pipe-C Dynamic subtest pipe-C: SUCCESS (0.298s) Starting dynamic subtest: pipe-D Dynamic subtest pipe-D: SUCCESS (0.302s) Subtest plane-scaler-with-clipping-clamping-pixel-formats: SUCCESS (4.137s) |
| Dmesg |
<6> [109.931991] Console: switching to colour dummy device 80x25
<6> [109.932264] [IGT] kms_plane_scaling: executing
<7> [109.961050] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [109.961059] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [109.965196] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [109.965531] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [109.965534] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [109.969671] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [109.970211] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [109.970215] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [109.970483] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [109.970606] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [109.970860] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [109.970958] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [109.970962] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [109.971056] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [109.972205] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [109.972208] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [109.972294] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [109.972723] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [109.972727] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [109.976864] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [109.977209] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [109.977212] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [109.981341] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [109.981882] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [109.981886] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [109.986028] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [109.986045] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [109.986050] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [109.990246] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [109.990266] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [109.990273] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [109.990473] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [109.992593] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [109.996381] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [109.997174] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [109.997648] xe 0000:03:00.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DP branch: OUI 00-1c-f8 dev-ID 176GB0 HW-rev 1.0 SW-rev 7.85 quirks 0x0000
<7> [109.998795] xe 0000:03:00.0: [drm:drm_dp_read_downstream_info [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD DFP: 0b f0 02 11
<7> [109.999175] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [ENCODER:524:DDI TC2/PHY G] MST support: port: yes, sink: SST, modparam: yes -> enable: SST
<7> [110.002065] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000, 1000000
<7> [110.002162] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 270000, 540000
<7> [110.002255] xe 0000:03:00.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 270000, 540000
<7> [110.005612] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.006690] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.008058] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.009160] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.010605] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.012399] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.014193] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.015286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.016693] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.018488] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.020286] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.021381] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.023953] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.025740] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.027541] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.029327] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.030424] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.031864] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.033670] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.035470] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.037280] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.038381] xe 0000:03:00.0: [drm:drm_dp_i2c_do_msg [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: native defer
<7> [110.039618] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: DVI dual 0, max TMDS clock 300000 kHz
<7> [110.039636] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 30.
<7> [110.039646] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 36.
<7> [110.039656] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does deep color 48.
<7> [110.039665] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] Assigning HDMI sink color depth as 16 bpc.
<7> [110.039675] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI sink does YCRCB444 in deep color.
<7> [110.039688] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD monitor DPF90435
<7> [110.039697] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [110.039707] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:525:DP-2] ELD size 40, SAD count 3
<7> [110.039747] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] VRR capable: no
<7> [110.040063] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] DFP max bpc 12, max dotclock 0, TMDS clock 25000-600000, PCON Max FRL BW 0Gbps
<7> [110.040666] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [110.041056] xe 0000:03:00.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:525:DP-2] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? no, YCbCr 4:4:4->4:2:0 conversion? no
<7> [110.043212] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "2880x1800": 60 390000 2880 3056 3400 3440 1800 1808 1818 1890 0x40 0x5 (CLOCK_HIGH)
<7> [110.043219] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [110.043224] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [110.043228] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "720x576i": 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a (NO_INTERLACE)
<7> [110.043232] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 (NO_STEREO)
<7> [110.043237] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 (NO_STEREO)
<7> [110.043241] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [110.043245] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005 (NO_STEREO)
<7> [110.043249] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005 (NO_STEREO)
<7> [110.043253] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [110.043257] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 (NO_STEREO)
<7> [110.043261] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 (NO_STEREO)
<7> [110.043265] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [110.043270] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [110.043275] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [110.043279] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [110.043283] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [110.043287] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005 (NO_STEREO)
<7> [110.043291] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005 (NO_STEREO)
<7> [110.043295] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015 (NO_INTERLACE)
<7> [110.043299] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005 (NO_STEREO)
<7> [110.043303] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005 (NO_STEREO)
<7> [110.043307] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [110.043311] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5 (NO_420)
<7> [110.043317] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] probed modes:
<7> [110.043321] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [110.043324] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 297000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.043327] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 30 296703 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.043330] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [110.043333] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [110.043336] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.043339] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.043342] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5
<7> [110.043345] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [110.043348] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [110.043351] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x5
<7> [110.043354] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2224x1668": 60 245000 2224 2270 2302 2382 1668 1671 1677 1714 0x40 0x5
<7> [110.043357] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x5
<7> [110.043360] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
<7> [110.043363] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [110.043366] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [110.043369] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [110.043372] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [110.043375] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<7> [110.043378] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [110.043381] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [110.043384] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 25 74250 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<7> [110.043387] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<7> [110.043390] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<7> [110.043393] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x1200": 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
<7> [110.043396] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [110.043399] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [110.043402] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [110.043405] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [110.043408] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1366x768": 60 85500 1366 1436 1579 1792 768 771 774 798 0x40 0x5
<7> [110.043411] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [110.043414] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [110.043417] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [110.043420] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<7> [110.043423] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [110.043426] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [110.043429] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<7> [110.043432] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [110.043435] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [110.043438] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [110.043441] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [110.043480] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [110.043484] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [110.043768] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [110.043861] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK on first message, retry
<7> [110.044098] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc2] NAK for addr: 0050 w(1)
<7> [110.044185] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [110.044188] xe 0000:03:00.0: [drm:intel_hdmi_set_edid [xe]] HDMI GMBUS EDID read failed, retry using GPIO bit-banging
<7> [110.044274] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] enabling bit-banging on i915 gmbus tc2. force bit now 1
<7> [110.045419] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus tc2
<7> [110.045422] xe 0000:03:00.0: [drm:intel_gmbus_force_bit [xe]] disabling bit-banging on i915 gmbus tc2. force bit now 0
<7> [110.045507] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [110.045519] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [110.045524] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [110.070371] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: DVI dual 1, max TMDS clock 340000 kHz
<7> [110.070376] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 30.
<7> [110.070379] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does deep color 36.
<7> [110.070381] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] Assigning HDMI sink color depth as 12 bpc.
<7> [110.070383] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI sink does YCRCB444 in deep color.
<7> [110.070385] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HF-VSDB: max TMDS clock: 600000 KHz, HDMI 2.1 support: no, DSC 1.2 support: no
<7> [110.070389] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD monitor AOC28E850.HDR
<7> [110.070391] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
<7> [110.070394] xe 0000:03:00.0: [drm:update_display_info.part.0] [CONNECTOR:537:HDMI-A-3] ELD size 36, SAD count 1
<7> [110.070556] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [110.070652] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [110.070890] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0040 w(1)
<7> [110.070977] xe 0000:03:00.0: [drm:drm_dp_dual_mode_detect [drm_display_helper]] DP dual mode HDMI ID: (err -6)
<7> [110.071418] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [110.071424] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [110.071428] xe 0000:03:00.0: [drm:drm_mode_prune_invalid] Rejected mode: "1920x1080i": 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15 (NO_INTERLACE)
<7> [110.071434] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] probed modes:
<7> [110.071437] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9
<7> [110.071440] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 594000 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.071443] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 60 593407 4096 4184 4272 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.071446] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 50 594000 4096 5064 5152 5280 2160 2168 2178 2250 0x40 0x5
<7> [110.071449] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 297000 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [110.071452] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "4096x2160": 24 296703 4096 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [110.071454] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2162 2172 2250 0x40 0x5
<7> [110.071457] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 594000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.071460] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 60 593407 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.071463] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 50 594000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5
<7> [110.071466] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 3888 3920 4400 2160 2164 2170 2250 0x40 0x9
<7> [110.071468] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 297000 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.071471] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 30 296703 3840 4016 4104 4400 2160 2168 2178 2250 0x40 0x5
<7> [110.071474] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 25 297000 3840 4896 4984 5280 2160 2168 2178 2250 0x40 0x5
<7> [110.071476] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 297000 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [110.071479] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2160": 24 296703 3840 5116 5204 5500 2160 2168 2178 2250 0x40 0x5
<7> [110.071482] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 336720 2880 2928 2960 3040 1800 1803 1809 1846 0x40 0x9
<7> [110.071485] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1600": 60 268500 2560 2608 2640 2720 1600 1603 1609 1646 0x40 0x9
<7> [110.071487] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2560x1440": 60 241500 2560 2608 2640 2720 1440 1443 1449 1481 0x40 0x9
<7> [110.071490] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1200": 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x40 0x9
<7> [110.071493] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 297000 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [110.071495] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 120 296703 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [110.071498] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 75 220597 1920 2056 2264 2608 1080 1081 1084 1128 0x0 0x6
<7> [110.071501] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<7> [110.071503] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<7> [110.071506] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<7> [110.071509] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1680x1050": 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
<7> [110.071511] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
<7> [110.071514] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
<7> [110.071517] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 61 110809 1280 1360 1496 1712 1024 1025 1028 1061 0x0 0x6
<7> [110.071520] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1440x900": 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<7> [110.071522] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x800": 60 71000 1280 1328 1360 1440 800 803 809 823 0x40 0x9
<7> [110.071525] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [110.071528] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [110.071531] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<7> [110.071533] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<7> [110.071543] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5
<7> [110.071546] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
<7> [110.071549] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<7> [110.071552] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
<7> [110.071555] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
<7> [110.071558] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<7> [110.071561] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<7> [110.071564] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x576": 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<7> [110.071567] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<7> [110.071569] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "720x480": 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<7> [110.071572] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
<7> [110.071575] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<7> [110.071577] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [110.071580] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "640x480": 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<7> [110.071611] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [110.071615] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [110.075719] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [110.075734] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [110.075737] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [110.079854] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<6> [110.080175] [IGT] kms_plane_scaling: starting subtest plane-scaler-with-clipping-clamping-pixel-formats
<6> [110.080589] [IGT] kms_plane_scaling: starting dynamic subtest pipe-A
<7> [110.082977] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [110.083253] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [110.083366] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [110.083618] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [110.083705] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [110.083791] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [110.085501] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [110.085792] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [110.085887] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [110.086122] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [110.086210] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [110.086297] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [110.087982] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [110.088240] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [110.088331] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [110.088570] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [110.088658] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [110.088744] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [110.089610] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [110.090447] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [110.090559] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [110.090657] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [110.090756] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [110.090854] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in output_types (expected 0x00000040, found 0x00000000)
<7> [110.090949] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [110.091040] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [110.091132] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [110.091221] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [110.091312] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [110.091408] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [110.091499] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [110.091599] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [110.091695] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [110.091790] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1083, found 0)
<7> [110.091885] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1088, found 0)
<7> [110.091979] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [110.092072] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [110.092163] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [110.092254] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [110.092343] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [110.092434] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [110.092524] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [110.092626] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [110.092715] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [110.092806] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [110.092899] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1083, found 0)
<7> [110.092994] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1088, found 0)
<7> [110.093089] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [110.093181] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [110.093271] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [110.093361] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [110.093451] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [110.093577] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in has_hdmi_sink (expected yes, found no)
<7> [110.093682] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in has_infoframe (expected yes, found no)
<7> [110.093772] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [110.093863] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [110.093954] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [110.094044] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in port_clock (expected 222750, found 0)
<7> [110.094134] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in infoframes.enable (expected 0x00000071, found 0x00000000)
<7> [110.094224] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in infoframes.gcp (expected 0x00000006, found 0x00000000)
<7> [110.094314] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in avi infoframe
<7> [110.094402] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [110.094491] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
<7> [110.094492] xe 0000:03:00.0: colorspace: RGB
<7> [110.094493] xe 0000:03:00.0: scan mode: Underscan
<7> [110.094495] xe 0000:03:00.0: colorimetry: No Data
<7> [110.094496] xe 0000:03:00.0: picture aspect: No Data
<7> [110.094497] xe 0000:03:00.0: active aspect: Same as Picture
<7> [110.094498] xe 0000:03:00.0: itc: No Data
<7> [110.094499] xe 0000:03:00.0: extended colorimetry: xvYCC 601
<7> [110.094500] xe 0000:03:00.0: quantization range: Full
<7> [110.094501] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling
<7> [110.094502] xe 0000:03:00.0: video code: 0
<7> [110.094503] xe 0000:03:00.0: ycc quantization range: Full
<7> [110.094504] xe 0000:03:00.0: hdmi content type: Graphics
<7> [110.094505] xe 0000:03:00.0: pixel repeat: 0
<7> [110.094506] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0
<7> [110.094508] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [110.094605] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in spd infoframe
<7> [110.094697] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [110.094792] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25
<7> [110.094793] xe 0000:03:00.0: vendor: Intel
<7> [110.094794] xe 0000:03:00.0: product: Discrete gfx
<7> [110.094795] xe 0000:03:00.0: source device information: PC General (0x9)
<7> [110.094797] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [110.094888] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hdmi infoframe
<7> [110.094980] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [110.095069] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4
<7> [110.095071] xe 0000:03:00.0: empty frame
<7> [110.095072] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [110.095161] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset
<7> [110.095252] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 3
<7> [110.095357] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.095467] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [110.095553] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x3 -> 0x1
<7> [110.095632] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x3 -> 0x1
<7> [110.095710] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1989) -> ( 0 - 4037), size 1989 -> 4037
<7> [110.095783] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (1989 - 2048) -> (4037 - 4096), size 59 -> 59
<7> [110.095852] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.095927] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.096001] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.096075] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.096148] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [110.096227] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0
<7> [110.096302] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.096375] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.096447] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.096517] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.096613] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [110.096708] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [110.096800] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [110.096893] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [110.096983] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [110.097073] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:267:pipe B] min cdclk: 192000 kHz -> 0 kHz
<7> [110.097176] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 4641 kHz
<7> [110.097281] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.097364] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [modeset]
<7> [110.097461] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [NOFB], visible: no
<7> [110.097559] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no
<7> [110.097651] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no
<7> [110.097743] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no
<7> [110.097834] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no
<7> [110.097926] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no
<7> [110.098561] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Disable audio codec on [CRTC:267:pipe B]
<7> [110.122002] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [110.122399] xe 0000:03:00.0: [drm:intel_hdmi_handle_sink_scrambling [xe]] [CONNECTOR:537:HDMI-A-3] scrambling=no, TMDS bit clock ratio=1/10
<7> [110.122637] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1)
<7> [110.122727] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [110.122963] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1)
<7> [110.123046] xe 0000:03:00.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:537:HDMI-A-3] Failed to read TMDS config: -6
<7> [110.123057] xe 0000:03:00.0: [drm:intel_ddi_disable [xe]] [CONNECTOR:537:HDMI-A-3] Failed to reset sink scrambling/TMDS bit clock ratio
<7> [110.123209] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [110.142844] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 3 (active 0x2, on? 1) for [CRTC:267:pipe B]
<7> [110.144494] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 3
<7> [110.144973] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]
<7> [110.145302] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]
<7> [110.145647] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]
<7> [110.145968] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]
<7> [110.146282] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]
<7> [110.146596] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]
<7> [110.146915] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]
<7> [110.147213] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]
<7> [110.147491] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]
<7> [110.147800] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]
<7> [110.148068] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]
<7> [110.148353] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]
<7> [110.148643] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]
<7> [110.148900] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]
<7> [110.149156] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]
<7> [110.149400] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]
<7> [110.149650] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:506:DP-1]
<7> [110.149891] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [110.150116] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [110.150355] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [110.150603] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:541:DP-3]
<7> [110.150834] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [110.152388] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7> [110.152599] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [110.167884] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [110.168444] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [110.169023] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03071 0x28d10e72)
<7> [110.170606] xe 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [110.171115] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [110.171229] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:558] is removed
<7> [110.171296] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.171735] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.172052] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.172353] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.172697] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.173027] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.173341] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.173745] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.174080] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.174397] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.186154] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:554]
<7> [110.186367] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.186778] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.187058] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.187326] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.187618] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.187869] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.188134] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.188445] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.188557] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [110.188800] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.189079] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.189415] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 4641 kHz -> 9282 kHz
<7> [110.189711] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.201451] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:554] from all active usage due to RMFB ioctl
<7> [110.201568] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:554] is removed
<7> [110.201622] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.201947] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.202205] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.202448] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.202722] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.202948] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.203194] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.203487] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.203812] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.204069] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.220235] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.220583] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.221058] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.221430] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.221846] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.222194] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.222528] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.222888] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.223313] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.223715] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.224070] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.224493] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.234874] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.234967] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.235016] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.235363] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.235719] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.236010] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.236294] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.236586] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.236881] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.237224] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.237560] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.237858] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.254138] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.254485] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.255030] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.255406] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.255818] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.256147] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [110.256466] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [110.256874] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1188000 num active planes 1
<7> [110.257354] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.257704] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.257962] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.258206] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.258449] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [110.258723] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [110.258959] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1188000 num active planes 1
<7> [110.259260] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.259565] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.259837] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.260147] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz
<7> [110.260403] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.267987] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.268028] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.268053] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.268231] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.268377] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.268541] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.268678] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.268809] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.268956] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.269133] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.269299] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.269461] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.293654] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.293821] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.294080] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.294296] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.294490] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.294714] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.294893] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.295096] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [110.295364] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.295560] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.295712] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.295854] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.295990] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.296135] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.296282] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [110.296515] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.296658] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.296794] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.296924] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.297050] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.297172] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.297298] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [110.297450] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [110.297612] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [110.297751] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [110.297916] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.301290] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.301332] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.301356] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.301561] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.301696] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.301819] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.301936] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.302047] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.302169] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.302327] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.302471] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.302623] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.321804] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.322028] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.322357] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [110.322749] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [110.323028] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [110.323293] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.323513] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.323588] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [110.323661] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [110.323732] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.323802] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.323873] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [110.323943] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [110.324024] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 445500 num active planes 2
<7> [110.324153] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.324232] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [110.324318] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [110.324390] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [110.324461] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.324543] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.324618] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [110.324691] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [110.324763] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.324833] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.324903] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [110.324973] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [110.325047] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 445500 num active planes 2
<7> [110.325171] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.325255] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [110.325344] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [110.325420] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [110.325498] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.325573] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.325648] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [110.325721] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [110.325793] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.325866] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.325939] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [110.326010] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [110.326084] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 445500 num active planes 2
<7> [110.326181] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 468 qgv_peak_bw: 48000
<7> [110.326276] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 468 qgv_peak_bw: 48000
<7> [110.326371] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 468
<7> [110.326483] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.334527] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.334559] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.334582] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.334677] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1378) -> ( 0 - 0), size 1378 -> 0
<7> [110.334756] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1378 - 4037) -> ( 0 - 0), size 2659 -> 0
<7> [110.334832] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.334907] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.334979] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.335050] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.335120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.335190] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.335262] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.335335] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.335417] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.335531] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.335627] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.335720] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.355071] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.355216] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.355422] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:33:plane 1A] using Y plane [PLANE:123:plane 4A]
<7> [110.355710] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [110.355903] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [110.356093] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.356277] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.356455] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [110.356690] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [110.356854] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.357014] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.357179] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.357346] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.357551] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 891000 num active planes 2
<7> [110.357763] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 936 qgv_peak_bw: 48000
<7> [110.357962] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 936 qgv_peak_bw: 48000
<7> [110.358164] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 936
<7> [110.358390] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.367937] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.367990] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.368029] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.368231] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 1403) -> ( 0 - 0), size 1403 -> 0
<7> [110.368382] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1403 - 4037) -> ( 0 - 0), size 2634 -> 0
<7> [110.368550] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.368701] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.368854] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.369000] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.369141] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.369278] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.369418] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.369573] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.369725] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.369907] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.370084] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.370251] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.391217] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.391297] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.391416] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.391512] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.391594] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.391674] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.391754] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.391845] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.391953] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.392055] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.392155] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.392274] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.401492] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.401581] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.401645] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.401990] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.402269] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.402605] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.402863] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.403113] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.403396] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.403758] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.404058] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.404348] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.427401] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.427633] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.427950] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.428195] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.428421] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.428673] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.428878] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.429094] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.429331] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.429602] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.429829] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.430085] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.434617] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.434687] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.434728] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.434985] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.435189] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.435378] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.435587] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.435766] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.435963] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.436190] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.436407] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.436631] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.458515] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.458592] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.458687] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.458760] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.458828] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.458896] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.458964] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.459039] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.459130] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.459218] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.459301] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.459402] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.468057] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.468143] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.468189] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.468528] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.468838] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.469096] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.469364] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.469658] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.469924] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.470223] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.470524] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.470803] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.501667] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.501763] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1
<7> [110.501889] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.501987] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.502079] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.502167] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [110.502254] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [110.502355] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1188000 num active planes 1
<7> [110.502482] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.502586] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.502689] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.502810] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:33
<7> [110.518125] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.518198] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:33:plane 1A] because [FB:555] is removed
<7> [110.518238] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.0: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.518564] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.518773] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.518969] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.519159] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.519349] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.519594] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.519838] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.520062] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.520272] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.537747] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.538074] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.538448] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.538791] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.539060] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.539306] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.539570] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.539835] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [110.540242] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.540518] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.540735] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.540942] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.541143] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.541330] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.541558] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [110.541825] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [110.542054] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [110.542280] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [110.542566] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.551393] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.551476] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.551516] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.551750] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.551944] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.552127] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.552294] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.552480] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.552664] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.552876] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.553075] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.553262] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.569045] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.569198] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.569424] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.569640] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.569805] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.569954] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.570098] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.570254] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.570500] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.570659] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.570792] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.570919] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.571054] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.571180] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.571311] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.571526] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.571673] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.571801] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.571920] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.572036] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.572146] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.572267] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.572418] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.572578] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.572709] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.572871] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.584565] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.584589] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.584604] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.584701] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.584775] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.584844] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.584912] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.584979] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.585054] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.585144] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.585231] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.585315] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.601697] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.601767] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.601864] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.601938] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.602008] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.602076] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.602148] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.602225] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.602325] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.602420] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.602533] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.602706] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.617888] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.617913] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.617930] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.618031] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.618111] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.618186] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.618259] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.618335] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.618419] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.618547] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.618687] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.618822] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.635901] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.636074] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.636354] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.636630] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.636843] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.637050] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [110.637249] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [110.637490] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1188000 num active planes 1
<7> [110.637754] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.638001] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.638238] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.638537] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.651610] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.651726] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.651794] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.652256] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.652723] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.653110] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.653531] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.653929] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.654354] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.654937] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.655370] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.655848] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.675129] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.675210] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.675328] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.675408] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.675497] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.675574] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.675647] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.675730] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [110.675830] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [110.675927] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [110.676019] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [110.676129] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.684760] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.684848] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.684899] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.685238] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.685567] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.685850] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.686133] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.686416] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.686769] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.687115] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.687459] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.687834] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.701471] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [110.706568] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.706906] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.707386] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:63:plane 2A] using Y plane [PLANE:123:plane 4A]
<7> [110.708008] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [110.708495] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [110.708890] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.709289] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.709745] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [110.710171] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [110.710532] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.710957] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.711289] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [110.711635] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [110.712052] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 445500 num active planes 2
<7> [110.712468] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 468 qgv_peak_bw: 48000
<7> [110.712870] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 468 qgv_peak_bw: 48000
<7> [110.713209] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 468
<7> [110.713688] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.717897] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.717953] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.717991] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.718213] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 1378) -> ( 0 - 0), size 1378 -> 0
<7> [110.718380] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1378 - 4037) -> ( 0 - 0), size 2659 -> 0
<7> [110.718437] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [110.718565] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.718744] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.718881] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.719010] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.719138] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.719264] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.719390] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.719576] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.719750] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.719908] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.720054] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.720195] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.739732] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.739941] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.740229] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:63:plane 2A] using Y plane [PLANE:123:plane 4A]
<7> [110.740571] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [110.740809] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [110.741022] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.741228] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.741444] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [110.741635] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [110.741821] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.741999] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.742173] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.742344] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.742567] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 891000 num active planes 2
<7> [110.742796] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 936 qgv_peak_bw: 48000
<7> [110.743004] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 936 qgv_peak_bw: 48000
<7> [110.743203] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 936
<7> [110.743455] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.751340] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.751387] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.751437] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.751628] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 1403) -> ( 0 - 0), size 1403 -> 0
<7> [110.751777] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1403 - 4037) -> ( 0 - 0), size 2634 -> 0
<7> [110.751918] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.752056] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.752189] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.752316] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.752465] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.752593] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.752718] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.752844] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.752977] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.753137] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.753295] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.753483] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.775496] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.775661] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.775908] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.776103] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.776280] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.776490] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.776670] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.776858] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.777077] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.777272] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.777478] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.777705] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.784781] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.784849] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.784888] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.785167] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.785386] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.785641] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.785832] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.786020] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.786231] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.786500] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.786735] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.786961] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.810015] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.810184] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.810459] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.810659] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.810837] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.811000] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.811167] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.811354] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.811652] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.811823] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.811972] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.812118] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.812260] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.812399] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.812561] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.812813] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.812967] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.813099] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.813219] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.813339] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.813473] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.813598] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.813749] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.813894] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.814034] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.814202] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.817990] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.818035] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.818062] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.818252] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.818421] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.818552] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.818684] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.818809] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.818944] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.819098] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.819243] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.819388] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.841328] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.841510] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.841746] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.841931] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.842099] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.842267] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.842440] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.842619] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.842873] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.843033] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.843174] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.843310] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.843466] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.843592] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.843724] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.843938] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.844086] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.844216] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.844340] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.844475] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.844600] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.844725] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.844879] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.845021] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.845159] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.845325] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.851291] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.851325] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.851344] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.851502] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.851613] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.851714] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.851812] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.851905] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.852011] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.852132] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.852250] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.852367] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.880463] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.880563] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2
<7> [110.880706] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.880810] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.880910] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.881006] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [110.881099] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [110.881202] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1188000 num active planes 1
<7> [110.881323] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [110.881452] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [110.881566] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [110.881695] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:63
<7> [110.884637] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.884665] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:63:plane 2A] because [FB:555] is removed
<7> [110.884682] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.1: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.884805] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:63:plane 2A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.884904] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.884994] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.885082] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.885167] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 2A] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.885265] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.885377] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.885502] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.885608] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.903669] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.903913] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [110.904239] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.904559] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.904821] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.905076] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [110.905324] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [110.905711] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [110.906091] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [110.906464] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [110.906812] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [110.907228] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [110.918186] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.918298] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [110.918357] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.918873] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.919296] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.919775] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.920114] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.920464] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.920839] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.921253] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.921678] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.922058] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.936312] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.936649] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [110.937060] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.937430] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.937753] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.938069] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.938360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.938753] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.939145] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.939549] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.939892] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.940272] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [110.951420] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.951517] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [110.951563] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.951901] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.952195] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.952549] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.952830] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.953098] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.953416] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.953764] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.954090] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.954418] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [110.970139] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [110.970461] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [110.970904] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [110.971260] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [110.971656] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [110.971977] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [110.972286] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [110.972691] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [110.973056] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [110.973425] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [110.973761] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [110.974141] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [110.984737] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [110.984828] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [110.984881] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [110.985178] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [110.985458] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [110.985710] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.985975] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.986237] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [110.986538] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [110.986852] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [110.987150] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [110.987434] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.003476] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.003757] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.004199] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.004639] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.005050] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.005483] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [111.005826] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [111.006202] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1188000 num active planes 1
<7> [111.006687] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.007085] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.007485] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.007921] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [111.018057] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.018129] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [111.018171] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.018493] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.018764] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.019029] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.019289] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.019620] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.019883] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.020185] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.020533] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.020818] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.042871] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.042951] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.043075] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.043165] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.043242] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.043317] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.043425] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.043509] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.043609] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [111.043706] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [111.043799] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [111.043912] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [111.051426] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.051509] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [111.051557] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.051889] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.052201] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.052565] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.052884] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.053190] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.053565] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.053943] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.054294] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.054691] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.077927] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.078259] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.078953] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.079600] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:93:plane 3A] using Y plane [PLANE:123:plane 4A]
<7> [111.080194] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [111.080735] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [111.081156] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.081562] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.081858] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [111.082102] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [111.082342] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.082634] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.082854] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [111.083067] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [111.083297] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 445500 num active planes 2
<7> [111.083681] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.083897] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:93:plane 3A] using Y plane [PLANE:123:plane 4A]
<7> [111.084127] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [111.084307] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [111.084518] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.084683] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.084850] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [111.085017] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [111.085177] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.085333] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.085567] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [111.085751] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [111.085904] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 445500 num active planes 2
<7> [111.086096] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 468 qgv_peak_bw: 48000
<7> [111.086281] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 468 qgv_peak_bw: 48000
<7> [111.086479] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 468
<7> [111.086678] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [111.101412] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.101466] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [111.101503] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.101730] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 1378) -> ( 0 - 0), size 1378 -> 0
<7> [111.101912] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1378 - 4037) -> ( 0 - 0), size 2659 -> 0
<7> [111.102090] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.102268] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.102488] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.102778] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.103064] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.103333] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.103682] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.103935] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.104224] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.104547] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.104750] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.104947] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.124976] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.125035] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.125121] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:93:plane 3A] using Y plane [PLANE:123:plane 4A]
<7> [111.125212] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [111.125284] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [111.125360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.125436] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.125513] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [111.125588] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [111.125661] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.125732] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.125803] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.125874] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.125959] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 891000 num active planes 2
<7> [111.126085] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.126165] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:93:plane 3A] using Y plane [PLANE:123:plane 4A]
<7> [111.126251] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [111.126324] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [111.126406] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.126477] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.126549] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [111.126623] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [111.126695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.126765] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.126836] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.126904] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.126977] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 891000 num active planes 2
<7> [111.127099] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.127174] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:93:plane 3A] using Y plane [PLANE:123:plane 4A]
<7> [111.127260] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [111.127336] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [111.127431] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.127503] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.127573] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [111.127644] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [111.127713] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.127783] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.127853] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.127923] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.127997] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 891000 num active planes 2
<7> [111.128091] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 936 qgv_peak_bw: 48000
<7> [111.128185] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 936 qgv_peak_bw: 48000
<7> [111.128278] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 936
<7> [111.128394] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [111.134584] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.134608] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [111.134630] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.134724] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 1403) -> ( 0 - 0), size 1403 -> 0
<7> [111.134805] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb (1403 - 4037) -> ( 0 - 0), size 2634 -> 0
<7> [111.134885] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.134962] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.135037] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.135110] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.135182] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.135252] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.135322] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.135404] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.135486] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.135586] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.135681] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.135777] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.156160] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.156309] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.156561] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.156748] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.156925] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.157102] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.157271] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.157527] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.157685] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.157780] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.157876] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.157989] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [111.168034] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.168108] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [111.168152] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.168421] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.168635] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.168841] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.169043] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.169244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.169523] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.169775] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.170010] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.170253] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.201760] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.201942] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.202190] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.202411] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.202589] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.202758] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.202920] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.203106] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.203308] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.203525] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.203710] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.203931] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [111.218240] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.218397] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [111.218467] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.218924] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.219316] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.219754] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.220116] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.220502] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.220873] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.221270] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.221710] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.222063] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.247082] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.247220] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.247463] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.247610] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.247746] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.247873] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.247994] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.248124] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.248281] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.248449] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.248587] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.248753] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [111.251341] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.251379] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [111.251402] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.251550] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.251666] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.251772] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.251877] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.251978] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.252086] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.252214] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.252366] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.252492] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.279798] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.279888] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4
<7> [111.280025] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.280119] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.280209] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.280299] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [111.280406] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [111.280502] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 1188000 num active planes 1
<7> [111.280604] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [111.280704] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [111.280801] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [111.280918] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:93
<7> [111.284658] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.284688] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:93:plane 3A] because [FB:555] is removed
<7> [111.284705] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.2: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.284824] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:93:plane 3A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.284918] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.285006] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.285091] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.285174] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:93:plane 3A] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.285267] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.285410] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.285517] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.285621] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.303632] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.303898] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.304280] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.304635] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.304927] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.305225] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.305548] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.305878] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.306268] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [111.306708] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [111.307122] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [111.307634] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:123
<7> [111.318277] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.318434] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:123:plane 4A] because [FB:555] is removed
<7> [111.318525] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.318984] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.319399] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.319736] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.320041] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.320357] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.320699] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.321082] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.321459] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.321800] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.336568] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.336858] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.337295] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.337760] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.338149] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.338572] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.338930] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.339330] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.339770] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.340186] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.340613] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.341073] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:123
<7> [111.351554] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.351640] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:123:plane 4A] because [FB:555] is removed
<7> [111.351689] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.352057] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.352395] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.352685] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.352972] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.353241] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.353583] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.353928] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.354243] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.354577] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.370710] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.371013] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.371550] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.371973] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.372414] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.372752] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.373084] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.373498] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.374022] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.374379] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.374670] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.374907] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.374979] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.375055] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.375133] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.375258] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.375355] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.375433] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.375509] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.375584] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.375657] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.375734] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.375835] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.375930] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.376022] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.376133] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:123
<7> [111.384687] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.384748] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:123:plane 4A] because [FB:555] is removed
<7> [111.384783] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.385038] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.385250] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.385523] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.385751] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.385973] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.386224] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.386578] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.386881] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.387214] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.413906] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.414238] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.414831] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.415205] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.415608] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.415952] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.416265] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.416659] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.417129] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.417476] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.417730] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.417980] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.418216] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.418499] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.418737] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.419103] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.419356] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.419564] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.419752] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.419938] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.420120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.420325] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.420563] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [111.420778] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [111.420989] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [111.421230] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:123
<7> [111.434772] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.434837] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:123:plane 4A] because [FB:555] is removed
<7> [111.434874] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.435153] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.435406] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.435630] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.435848] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.436064] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.436300] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.436570] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.436817] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.437059] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.470339] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.470528] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.470771] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.470958] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.471130] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.471325] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.471500] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.471686] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.471888] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.472074] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.472257] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.472505] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:123
<7> [111.484958] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.485073] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:123:plane 4A] because [FB:555] is removed
<7> [111.485137] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.485671] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.486029] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.486421] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.486710] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.487055] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.487429] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.487771] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.488084] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.488417] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.509819] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.509885] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.509978] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.510054] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.510125] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.510193] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.510261] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.510363] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.510464] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.510561] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.510653] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.510765] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:123
<7> [111.518327] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.518444] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:123:plane 4A] because [FB:555] is removed
<7> [111.518501] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.518891] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.519194] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.519533] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.519804] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.520053] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.520373] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.520700] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.521004] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.521314] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.546042] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.546187] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8
<7> [111.546417] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.546585] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.546732] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.546869] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.547002] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.547146] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.547325] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.547489] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.547643] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.547819] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:123
<7> [111.551420] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.551466] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:123:plane 4A] because [FB:555] is removed
<7> [111.551491] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.3: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.551671] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:123:plane 4A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.551815] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.551941] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.552063] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.552183] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:123:plane 4A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.552356] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.552518] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.552663] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.552807] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.570239] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.570551] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.570928] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.571207] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.571529] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.571787] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.572021] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.572322] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.572623] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [111.572900] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [111.573164] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [111.573503] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:133
<7> [111.584941] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.585049] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:133:plane 5A] because [FB:555] is removed
<7> [111.585108] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.585636] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.585984] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.586283] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.586565] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.586835] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.587120] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.587481] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.587801] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.588096] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.603658] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.603986] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.604594] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.605009] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.605411] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.605765] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.606087] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.606468] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.606882] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.607239] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.607670] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.608100] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:133
<7> [111.618304] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.618440] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:133:plane 5A] because [FB:555] is removed
<7> [111.618494] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.618900] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.619269] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.619608] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.619935] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.620260] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.620599] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.620969] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.621344] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.621695] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.637196] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.637564] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.638085] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.638570] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.638953] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.639352] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.639695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.640059] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.640517] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.640900] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.641276] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.641705] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:133
<7> [111.651611] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.651698] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:133:plane 5A] because [FB:555] is removed
<7> [111.651747] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.652123] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.652507] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.652793] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.653069] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.653365] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.653665] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.653996] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.654328] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.654639] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.678003] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.678187] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.678489] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.678696] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.678880] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.679056] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.679224] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.679451] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.679734] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.679918] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.680075] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.680219] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.680401] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.680540] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.680686] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.680906] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.681046] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.681171] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.681315] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.681447] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.681575] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.681702] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 297000 num active planes 1
<7> [111.681855] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [111.681998] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [111.682136] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [111.682312] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:133
<7> [111.684683] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.684720] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:133:plane 5A] because [FB:555] is removed
<7> [111.684741] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.684898] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.685025] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.685138] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.685257] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.685363] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.685483] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.685619] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.685750] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.685876] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.709218] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.709373] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.709563] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.709712] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.709849] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.709978] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.710103] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.710270] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.710486] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.710621] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.710739] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.710850] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.710959] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.711065] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.711179] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.711368] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.711488] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.711594] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.711695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.711790] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.711884] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.711978] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.712101] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.712221] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.712355] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.712495] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:133
<7> [111.718022] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.718062] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:133:plane 5A] because [FB:555] is removed
<7> [111.718082] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.718263] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.718385] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.718494] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.718598] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.718699] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.718816] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.718945] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.719068] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.719187] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.743328] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.743456] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.743659] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.743812] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.743952] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.744092] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.744243] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.744394] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.744561] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.744717] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.744863] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.745038] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:133
<7> [111.751458] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.751518] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:133:plane 5A] because [FB:555] is removed
<7> [111.751550] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.751782] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.751973] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.752143] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.752361] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.752536] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.752723] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.752923] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.753110] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.753335] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.777656] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.777801] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10
<7> [111.778016] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.778167] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.778340] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.778482] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.778612] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.778749] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [111.778907] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.779058] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.779200] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.779409] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:149:pipe A] attached scaler id 0.0 to PLANE:133
<7> [111.784747] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.784798] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:133:plane 5A] because [FB:555] is removed
<7> [111.784826] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:149:pipe A] scaler_user index 0.4: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.785045] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:133:plane 5A] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.785254] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.785422] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.785570] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.785716] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:133:plane 5A] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.785867] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 0 num active planes 0
<7> [111.786044] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.786222] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.786396] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [111.803648] [IGT] kms_plane_scaling: finished subtest pipe-A, SUCCESS
<6> [111.805170] [IGT] kms_plane_scaling: starting dynamic subtest pipe-B
<7> [111.807662] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [111.811128] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.811930] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.812178] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.812595] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.812798] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.812996] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.815245] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.815893] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.816071] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.816402] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.816562] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.816716] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.818763] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.819256] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [111.820234] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.820367] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [111.820645] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [111.820765] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [111.820877] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [111.821916] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:555]
<7> [111.822765] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:267:pipe B] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000
<7> [111.822869] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000
<7> [111.822970] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [111.823070] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:267:pipe B]
<7> [111.823167] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [111.823300] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [111.823394] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [111.823491] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [111.823584] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 5190451/8388608 link 288358/524288, found tu 0, data 0/0 link 0/0)
<7> [111.823678] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)
<7> [111.823769] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [111.823859] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [111.823946] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [111.824036] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [111.824126] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [111.824220] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [111.824310] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [111.824397] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [111.824484] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [111.824572] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [111.824660] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [111.824749] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [111.824838] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [111.824927] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [111.825015] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [111.825104] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [111.825194] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [111.825307] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [111.825402] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [111.825494] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [111.825585] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [111.825677] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [111.825767] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [111.825858] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [111.825948] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [111.826037] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [111.826127] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [111.826222] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [111.826312] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [111.826404] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [111.826499] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [111.826591] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [111.826682] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 270000, found 0)
<7> [111.826772] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [111.826864] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [111.826954] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [111.827043] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [111.827132] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [111.827228] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5190451/8388608 link 288358/524288)
<7> [111.827318] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)
<7> [111.827406] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [111.827493] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.827580] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [111.827669] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.827757] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.827846] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.827934] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.828021] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.828110] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.828198] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.828301] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.828389] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.828477] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.828570] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [111.828655] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [111.828745] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [111.828833] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [111.828922] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [111.829009] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [111.829096] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [111.829182] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [111.829281] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [111.829371] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [111.829461] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [111.829551] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [111.829642] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [111.829737] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [111.829830] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [111.829921] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [111.830011] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in dpll_hw_state
<7> [111.830105] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [111.830198] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.830324] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 222750
<7> [111.830434] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [111.830544] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.830641] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x40e8
<7> [111.830729] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x7d20
<7> [111.830818] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0x0a06
<7> [111.830908] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0x8f1c
<7> [111.830998] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x0000
<7> [111.831094] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x0000
<7> [111.831189] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2200
<7> [111.831296] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0xffff
<7> [111.831388] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x0400
<7> [111.831478] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [111.831567] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0001
<7> [111.831656] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [111.831745] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [111.831834] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.831923] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 270000
<7> [111.832012] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [111.832101] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.832190] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x308c
<7> [111.832299] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x2110
<7> [111.832395] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0xcc9c
<7> [111.832487] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0xbfc1
<7> [111.832579] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x4b9a
<7> [111.832670] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x3f81
<7> [111.832760] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2000
<7> [111.832850] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0x0001
<7> [111.832939] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x5000
<7> [111.833027] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [111.833116] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [111.833212] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [111.833310] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [111.833403] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [111.833496] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [111.833588] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in port_clock (expected 0, found 270000)
<7> [111.833680] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset
<7> [111.833772] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:149:pipe A] releasing TC PLL 2
<7> [111.833874] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [111.833973] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x2
<7> [111.834069] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x1 -> 0x2
<7> [111.834168] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0
<7> [111.834263] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.834337] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (4037 - 4096), size 0 -> 59
<7> [111.834409] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.834482] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.834554] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [111.834625] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [111.834709] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [111.834807] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [111.834902] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [111.834994] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [111.835097] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 192000 kHz -> 0 kHz
<7> [111.835190] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:267:pipe B] min cdclk: 0 kHz -> 192000 kHz
<7> [111.835306] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 4641 kHz
<7> [111.835411] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 2
<7> [111.835507] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 2
<7> [111.835600] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [111.835680] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [modeset]
<7> [111.835777] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [NOFB], visible: no
<7> [111.835872] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [111.835967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [111.836061] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [111.836153] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [111.836256] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [111.836346] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]
<7> [111.836437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [111.836527] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0
<7> [111.836617] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [111.836706] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [111.836794] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [111.836881] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [111.836967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [111.837059] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [111.837145] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [111.837242] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [111.837331] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [111.837419] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [111.837507] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [111.837596] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [111.837684] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [111.837771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [111.837859] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [111.837947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [111.838035] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [111.838123] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [111.838219] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.838314] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [111.838407] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.838499] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [111.838590] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [111.838679] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000
<7> [111.838771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [111.838864] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40, scaler_id: -1, scaling_filter: 0
<7> [111.838954] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [111.839045] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [111.839135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [111.839231] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000
<7> [111.839321] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [111.839410] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [111.839498] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [111.839586] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [111.839674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [111.839761] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [111.839848] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [111.839935] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [111.840022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [111.840108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [111.840195] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [111.840296] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [111.840384] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [111.840477] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [111.840569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [111.840660] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [111.840749] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.840840] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.840929] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.841019] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.841108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.841196] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [111.841302] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.841391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.841481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [111.841569] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [111.841658] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [111.841748] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:555] 1920x1080 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes
<7> [111.841839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [111.841928] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1824.000000x988.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [111.842019] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no
<7> [111.842108] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no
<7> [111.842198] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no
<7> [111.842298] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no
<7> [111.842387] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no
<7> [111.842768] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [111.842909] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:149:pipe A]
<7> [111.867764] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [111.868072] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [111.887686] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [111.889761] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x1, on? 1) for [CRTC:149:pipe A]
<7> [111.891530] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [111.891904] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]
<7> [111.892169] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]
<7> [111.892459] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]
<7> [111.892724] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]
<7> [111.892981] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]
<7> [111.893251] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]
<7> [111.893505] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]
<7> [111.893745] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]
<7> [111.893992] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]
<7> [111.894248] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]
<7> [111.894474] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]
<7> [111.894696] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]
<7> [111.894921] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]
<7> [111.895128] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]
<7> [111.895351] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]
<7> [111.895559] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]
<7> [111.895767] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:506:DP-1]
<7> [111.895982] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [111.896187] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [111.896427] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [111.896628] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:541:DP-3]
<7> [111.896826] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [111.897043] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: yes)
<7> [111.897274] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x2, on? 0) for [CRTC:267:pipe B]
<7> [111.897479] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [111.901843] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [111.905590] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [111.906547] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [111.906999] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [111.907961] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [111.908727] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [111.914668] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [111.915048] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [111.920772] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [111.921263] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [111.922274] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B
<7> [111.939608] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [111.940405] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [111.941100] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:267:pipe B], 40 bytes ELD
<7> [111.956512] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]
<7> [111.957074] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [111.961780] xe 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe B
<7> [111.962307] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:555] from all active usage due to RMFB ioctl
<7> [111.962430] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:555] is removed
<7> [111.962500] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.962956] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.963394] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.963806] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.964214] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.964605] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.965041] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [111.965597] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.966034] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.966489] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [111.975315] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [111.975544] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [111.975900] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [111.976213] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [111.976474] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [111.976712] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [111.976948] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [111.977238] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [111.977525] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [111.977791] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [111.978052] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [111.978389] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 4641 kHz -> 9282 kHz
<7> [111.978644] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [111.990021] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [111.990111] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [111.990162] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [111.990634] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [111.990941] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [111.991241] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.991520] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.991780] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [111.992061] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [111.992428] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [111.992742] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [111.993028] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.008996] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.009367] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.009889] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.010371] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.010763] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.011135] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.011549] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.011956] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.012472] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.012866] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.013253] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.013683] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.023415] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.023507] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.023556] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.023920] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.024265] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.024567] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.024844] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.025116] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.025464] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.025803] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.026129] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.026509] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.028250] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [112.042390] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.042707] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.043476] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.044018] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.044536] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.044993] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [112.045470] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [112.046003] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 1188000 num active planes 1
<7> [112.046637] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [112.047251] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [112.047803] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [112.048463] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 9282 kHz -> 18563 kHz
<7> [112.048807] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.057057] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.057257] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.057349] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.057958] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.058480] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.058892] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.059315] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.059693] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.060099] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.060599] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.061075] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.061515] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.087757] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.088105] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.088653] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.088992] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.089321] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.089613] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.089894] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.090215] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [112.090634] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.090902] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.091137] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.091389] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.091603] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.091803] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.092014] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [112.092297] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [112.092538] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [112.092764] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [112.093030] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.106828] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.106932] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.106990] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.107463] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.107791] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.108106] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.108503] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.108804] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.109120] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.109534] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.109877] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.110225] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.132396] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.132582] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.132838] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:151:plane 1B] using Y plane [PLANE:241:plane 4B]
<7> [112.133105] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [112.133345] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [112.133545] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.133721] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.133896] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [112.134064] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [112.134257] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.134420] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.134576] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [112.134726] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [112.134903] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 445500 num active planes 2
<7> [112.135209] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.135374] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:151:plane 1B] using Y plane [PLANE:241:plane 4B]
<7> [112.135538] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [112.135673] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [112.135805] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.135939] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.136070] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [112.136213] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [112.136335] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.136453] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.136575] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [112.136689] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [112.136806] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 445500 num active planes 2
<7> [112.137002] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.137120] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:151:plane 1B] using Y plane [PLANE:241:plane 4B]
<7> [112.137268] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [112.137380] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [112.137487] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.137587] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.137693] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [112.137794] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [112.137892] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.137981] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.138072] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [112.138177] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [112.138270] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 445500 num active planes 2
<7> [112.138390] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 468 qgv_peak_bw: 48000
<7> [112.138508] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 468 qgv_peak_bw: 48000
<7> [112.138622] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 468
<7> [112.138755] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.139787] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.139813] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.139832] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.139939] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1378) -> ( 0 - 0), size 1378 -> 0
<7> [112.140026] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb (1378 - 4037) -> ( 0 - 0), size 2659 -> 0
<7> [112.140109] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.140205] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.140280] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.140353] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.140427] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.140500] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.140572] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.140643] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.140722] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.140822] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.140919] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.141010] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.159743] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.159846] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.160000] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:151:plane 1B] using Y plane [PLANE:241:plane 4B]
<7> [112.160179] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [112.160310] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [112.160433] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.160554] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.160673] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [112.160793] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [112.160917] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.161031] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.161159] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.161270] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.161396] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 891000 num active planes 2
<7> [112.161600] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.161734] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:151:plane 1B] using Y plane [PLANE:241:plane 4B]
<7> [112.161871] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [112.161982] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [112.162089] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.162214] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.162319] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [112.162421] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [112.162524] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.162627] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.162729] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.162827] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.162927] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 891000 num active planes 2
<7> [112.163091] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.163220] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:151:plane 1B] using Y plane [PLANE:241:plane 4B]
<7> [112.163342] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [112.163445] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [112.163537] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.163628] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.163723] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [112.163812] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [112.163901] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.163987] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.164074] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.164171] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.164260] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 891000 num active planes 2
<7> [112.164374] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 936 qgv_peak_bw: 48000
<7> [112.164485] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 936 qgv_peak_bw: 48000
<7> [112.164594] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 936
<7> [112.164723] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.173181] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.173209] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.173227] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.173323] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 1403) -> ( 0 - 0), size 1403 -> 0
<7> [112.173397] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb (1403 - 4037) -> ( 0 - 0), size 2634 -> 0
<7> [112.173465] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.173533] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.173598] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.173665] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.173732] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.173798] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.173863] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.173927] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.174004] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.174095] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.174202] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.174296] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.194916] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.195058] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.195323] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.195503] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.195673] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.195832] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.195984] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.196175] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.196369] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.196556] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.196734] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.196944] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.206679] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.206745] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.206781] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.207073] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.207361] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.207598] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.207805] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.208005] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.208264] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.208531] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.208773] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.209009] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.232893] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.232956] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.233056] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.233262] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.233617] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.233924] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.234270] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.234676] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.235084] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.235556] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.236069] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.236787] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.239870] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.239934] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.239971] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.240282] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.240535] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.240749] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.240958] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.241164] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.241416] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.241668] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.241902] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.242133] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.264732] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.264810] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.264943] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.265033] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.265134] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.265216] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.265295] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.265385] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.265490] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.265591] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.265692] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.265810] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.273468] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.273576] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.273635] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.274081] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.274531] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.274838] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.275157] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.275448] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.275757] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.276127] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.276477] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.276786] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.300590] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.300667] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40
<7> [112.300776] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.300861] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.300942] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.301018] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [112.301095] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [112.301200] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 1188000 num active planes 1
<7> [112.301300] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [112.301397] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [112.301491] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [112.301605] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:151
<7> [112.306570] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.306627] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:151:plane 1B] because [FB:558] is removed
<7> [112.306658] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.6: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.306878] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.307051] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.307240] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.307415] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.307562] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.307726] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.307919] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.308096] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.308299] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.325768] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.326058] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.326477] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.326757] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.327022] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.327326] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.327571] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.327839] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [112.328162] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [112.328445] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [112.328720] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [112.329036] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.340210] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.340332] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.340394] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.340848] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.341248] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.341566] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.341876] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.342233] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.342576] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.342944] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.343324] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.343656] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.358596] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.358968] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.359581] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.360003] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.360415] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.360782] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.361140] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.361494] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.362025] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.362439] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.362721] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.362992] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.363287] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.363546] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.363817] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.364152] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.364481] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.364754] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.365078] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.373276] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.373321] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.373346] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.373528] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.373684] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.373833] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.373977] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.374137] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.374311] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.374510] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.374706] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.374885] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.392384] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.392655] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.393074] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.393529] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.393890] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.394295] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.394633] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.395002] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.395582] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.395901] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.396135] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.396209] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.396279] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.396343] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.396415] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.396527] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.396603] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.396671] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.396736] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.396802] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.396866] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.396934] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.397024] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.397118] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.397208] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.397308] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.406458] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.406493] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.406513] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.406661] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.406795] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.406926] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.407053] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.407210] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.407356] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.407529] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.407696] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.407861] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.425178] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.425418] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.425801] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.426171] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.426488] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.426802] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [112.427145] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [112.427505] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 1188000 num active planes 1
<7> [112.427871] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [112.428264] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [112.428598] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [112.428985] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.439957] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.440034] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.440101] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.440436] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.440716] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.440968] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.441270] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.441524] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.441783] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.442105] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.442407] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.442684] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.467642] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.467817] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.468099] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.468311] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.468507] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.468689] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.468855] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.469168] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [112.469381] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [112.469581] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [112.469773] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [112.469993] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.473267] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.473322] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.473352] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.473571] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.473742] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.473890] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.474036] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.474210] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.474365] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.474551] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.474723] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.474887] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.496939] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.497129] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.497357] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:181:plane 2B] using Y plane [PLANE:241:plane 4B]
<7> [112.497592] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [112.497772] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [112.497952] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.498166] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.498330] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [112.498487] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [112.498634] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.498776] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.498921] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [112.499057] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [112.499244] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 445500 num active planes 2
<7> [112.499439] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 468 qgv_peak_bw: 48000
<7> [112.499624] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 468 qgv_peak_bw: 48000
<7> [112.499788] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 468
<7> [112.499990] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.506607] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.506666] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.506707] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.506962] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 1378) -> ( 0 - 0), size 1378 -> 0
<7> [112.507200] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb (1378 - 4037) -> ( 0 - 0), size 2659 -> 0
<7> [112.507400] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.507592] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.507772] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.507947] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.508141] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.508310] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.508461] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.508621] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.508794] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.508991] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.509194] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.509377] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.530923] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.531078] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.531281] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:181:plane 2B] using Y plane [PLANE:241:plane 4B]
<7> [112.531497] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [112.531657] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [112.531803] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.531941] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.532089] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [112.532226] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [112.532367] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.532506] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.532639] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.532768] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.532913] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 891000 num active planes 2
<7> [112.533098] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 936 qgv_peak_bw: 48000
<7> [112.533251] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 936 qgv_peak_bw: 48000
<7> [112.533400] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 936
<7> [112.533577] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.539948] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.540005] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.540043] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.540322] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 1403) -> ( 0 - 0), size 1403 -> 0
<7> [112.540521] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb (1403 - 4037) -> ( 0 - 0), size 2634 -> 0
<7> [112.540701] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.540868] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.541031] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.541210] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.541358] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.541506] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.541652] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.541798] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.541956] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.542150] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.542329] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.542499] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.564412] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.564561] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.564747] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.564894] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.565031] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.565188] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.565318] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.565469] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.565633] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.565790] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.565935] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.566125] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.573323] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.573387] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.573422] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.573694] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.573898] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.574141] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.574321] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.574503] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.574691] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.574906] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.575120] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.575316] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.601177] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.601514] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.602038] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.602543] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.602864] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.602932] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.603000] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.603094] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.603188] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.603276] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.603361] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.603461] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.606642] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.606733] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.606783] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.607211] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.607540] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.607823] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.608173] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.608496] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.608807] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.609182] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.609534] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.609839] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.635606] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.635756] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.635941] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.636109] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.636255] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.636400] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.636535] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.636680] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.636883] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.637014] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.637146] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.637251] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.637355] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.637458] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.637566] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.637701] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.637830] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.637957] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.638115] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.639833] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.639864] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.639882] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.640014] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.640142] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.640241] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.640337] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.640431] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.640532] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.640648] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.640759] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.640864] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.667576] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.667666] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.667795] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.667889] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.667977] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.668077] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [112.668163] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [112.668259] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 1188000 num active planes 1
<7> [112.668397] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.668487] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.668568] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.668647] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.668720] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [112.668792] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [112.668866] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 1188000 num active planes 1
<7> [112.668983] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80
<7> [112.669080] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.669152] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.669219] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.669290] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [112.669358] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [112.669429] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 1188000 num active planes 1
<7> [112.669519] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [112.669608] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [112.669694] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [112.669795] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:181
<7> [112.673157] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.673182] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:181:plane 2B] because [FB:558] is removed
<7> [112.673197] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.7: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.673297] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:181:plane 2B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.673377] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.673453] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.673528] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.673599] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:181:plane 2B] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.673679] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.673771] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.673858] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.673942] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.691901] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.692174] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.692477] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.692716] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.692952] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.693244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.693591] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.693882] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [112.694397] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.694694] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.694942] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.695255] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.695504] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.695750] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.696011] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [112.696503] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.696712] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.696782] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.696850] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.696918] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.696985] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.697067] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [112.697156] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [112.697242] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [112.697325] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [112.697428] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [112.706473] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.706512] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [112.706534] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.706696] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.706838] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.706971] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.707132] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.707261] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.707406] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.707581] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.707751] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.707963] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.724651] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.724899] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.725353] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.725662] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.725956] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.726293] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.726553] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.726835] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.727207] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.727536] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.727826] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.728196] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [112.739988] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.740124] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [112.740198] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.740551] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.740838] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.741139] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.741390] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.741636] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.741921] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.742263] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.742562] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.742849] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.758999] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.759348] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.759843] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.760334] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.760720] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.761141] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.761520] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.761950] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.762517] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.762981] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.763456] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.763962] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [112.773349] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.773430] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [112.773475] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.773820] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.774146] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.774413] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.774689] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.774949] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.775291] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.775625] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.775926] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.776255] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.792881] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.793396] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.794127] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.794686] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.795318] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.795859] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [112.796244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [112.796610] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 1188000 num active planes 1
<7> [112.796982] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [112.797413] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [112.797762] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [112.798196] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [112.806620] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.806693] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [112.806738] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.807097] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.807364] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.807618] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.807869] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.808144] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.808411] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.808722] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.809096] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.809515] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.831340] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.831444] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.831596] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.831718] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.831835] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.831951] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.832078] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.832212] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [112.832362] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [112.832509] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [112.832655] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [112.832832] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [112.840210] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.840359] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [112.840447] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.840935] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.841368] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.841773] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.842157] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.842519] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.842925] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.843390] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.843829] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.844260] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.866920] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.867408] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.868039] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:211:plane 3B] using Y plane [PLANE:241:plane 4B]
<7> [112.868638] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 1378), size 0 -> 1378
<7> [112.869143] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1378 - 4037), size 0 -> 2659
<7> [112.869574] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.869896] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.870205] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90
<7> [112.870460] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91
<7> [112.870690] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.870916] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.871196] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90
<7> [112.871431] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91
<7> [112.871664] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 445500 num active planes 2
<7> [112.871942] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 468 qgv_peak_bw: 48000
<7> [112.872239] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 468 qgv_peak_bw: 48000
<7> [112.872493] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 468
<7> [112.872778] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [112.890203] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.890390] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [112.890479] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.891050] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 1378) -> ( 0 - 0), size 1378 -> 0
<7> [112.891467] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb (1378 - 4037) -> ( 0 - 0), size 2659 -> 0
<7> [112.891858] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.892260] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.892616] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 8, 16, 46, 46, 86, 86, 86, 86, 22, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.892961] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 10, 19, 52, 52, 96, 96, 0, 0, 23, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.893338] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.893663] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.893956] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 5, 16, 46, 46, 86, 86, 86, 86, 19, 76, 90 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.894273] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 7, 19, 52, 52, 96, 96, 0, 0, 20, 85, 91 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.894631] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.895005] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.895325] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.895635] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.913148] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.913216] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.913310] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:211:plane 3B] using Y plane [PLANE:241:plane 4B]
<7> [112.913408] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [112.913488] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [112.913562] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.913635] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.913706] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [112.913775] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [112.913843] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.913912] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.913987] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.914062] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.914148] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 891000 num active planes 2
<7> [112.914281] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.914368] xe 0000:03:00.0: [drm:intel_plane_atomic_check [xe]] UV plane [PLANE:211:plane 3B] using Y plane [PLANE:241:plane 4B]
<7> [112.914460] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 1403), size 0 -> 1403
<7> [112.914538] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> (1403 - 4037), size 0 -> 2634
<7> [112.914616] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.914696] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.914773] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150
<7> [112.914849] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151
<7> [112.914923] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.915004] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.915079] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [112.915153] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [112.915232] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 891000 num active planes 2
<7> [112.915337] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 936 qgv_peak_bw: 48000
<7> [112.915438] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 936 qgv_peak_bw: 48000
<7> [112.915538] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 936
<7> [112.915655] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [112.923148] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.923175] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [112.923194] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.923311] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 1403) -> ( 0 - 0), size 1403 -> 0
<7> [112.923404] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb (1403 - 4037) -> ( 0 - 0), size 2634 -> 0
<7> [112.923490] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.923575] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 2, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.923653] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 14, 28, 82, 82, 154, 154, 154, 154, 28, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.923729] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 17, 32, 92, 92, 171, 171, 0, 0, 29, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.923805] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.923881] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.923957] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.924047] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.924135] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.924238] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.924338] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.924437] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.952015] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.952245] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.952583] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.952843] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.953102] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.953326] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.953545] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.953776] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.954143] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.954389] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.954600] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.954791] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.954980] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.955165] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.955358] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.955647] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.955827] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.956002] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.956158] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.956306] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.956466] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.956629] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.956821] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.957005] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.957183] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.957400] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [112.973411] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [112.973480] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [112.973520] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [112.973837] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [112.974120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [112.974362] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.974595] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.974823] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [112.975104] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [112.975415] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [112.975700] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [112.975976] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [112.998676] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [112.998752] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [112.998865] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [112.998949] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [112.999035] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [112.999109] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [112.999180] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [112.999260] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [112.999352] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [112.999453] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [112.999539] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [112.999641] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [113.006667] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.006769] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [113.006829] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.007211] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.007491] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.007744] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.008022] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.008285] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.008573] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.008879] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.009231] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.009523] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.031749] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.031814] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [113.031915] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.032005] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.032081] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.032158] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.032233] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.032313] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.032407] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.032499] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.032591] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.032699] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [113.040150] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.040247] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [113.040300] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.040707] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.041112] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.041421] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.041692] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.041979] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.042280] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.042633] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.042969] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.043283] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.076657] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.076802] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100
<7> [113.077021] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.077176] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.077326] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.077476] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465
<7> [113.077610] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498
<7> [113.077758] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 1188000 num active planes 1
<7> [113.077926] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [113.078107] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [113.078259] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [113.078437] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:211
<7> [113.090164] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.090268] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:211:plane 3B] because [FB:558] is removed
<7> [113.090320] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.8: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.090678] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:211:plane 3B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.090994] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.091258] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.091516] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] blocks 30, 91, 271, 271, 511, 511, 511, 511, 44, 451, 465 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.091752] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:211:plane 3B] min_ddb 34, 102, 300, 300, 564, 564, 0, 0, 45, 498, 498 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.092046] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.092357] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.092652] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.092912] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.109977] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.110363] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.110968] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.111437] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.111865] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.112332] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.112741] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.113229] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [113.113776] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.114360] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.114912] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.115585] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:241
<7> [113.123391] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.123467] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:241:plane 4B] because [FB:558] is removed
<7> [113.123511] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.123860] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.124181] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.124461] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.124734] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.125023] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.125322] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.125645] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.125953] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.126228] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.142364] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.142785] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.143462] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.143992] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.144470] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.144962] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.145434] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.145996] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.146282] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.146428] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.146572] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.146748] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:241
<7> [113.156865] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.157113] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:241:plane 4B] because [FB:558] is removed
<7> [113.157205] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.157744] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.158252] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.158707] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.159181] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.159635] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.160164] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.160770] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.161319] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.161838] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.176479] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.176902] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.177581] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.178125] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.178601] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.179115] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.179584] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.179959] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.180109] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.180256] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.180401] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.180577] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:241
<7> [113.190234] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.190387] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:241:plane 4B] because [FB:558] is removed
<7> [113.190483] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.191113] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.191570] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.192047] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.192504] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.192969] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.193479] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.194135] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.194736] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.195344] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.217091] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.217590] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.218304] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.218806] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.219348] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.219797] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.220242] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.220693] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [113.221368] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.221759] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.222126] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.222458] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.222762] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.223066] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.223361] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [113.223724] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.224076] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.224396] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.224765] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:241
<7> [113.240340] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.240491] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:241:plane 4B] because [FB:558] is removed
<7> [113.240584] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.241231] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.241710] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.242228] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.242684] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.243159] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.243705] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.244306] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.244839] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.245394] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.272304] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.272556] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.273007] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.273341] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.273664] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.274016] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.274340] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.274703] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.275322] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.275771] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.276234] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.276648] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.277070] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.277148] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.277229] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.277358] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.277451] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.277532] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.277613] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.277694] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.277771] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.277850] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.277962] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.278062] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.278162] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.278281] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:241
<7> [113.290003] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.290072] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:241:plane 4B] because [FB:558] is removed
<7> [113.290106] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.290355] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.290569] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.290778] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.291031] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.291235] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.291466] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.291733] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.292008] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.292256] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.313831] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.313917] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.314035] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.314124] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.314207] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.314286] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.314364] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.314449] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.314553] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.314656] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.314758] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.314876] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:241
<7> [113.323305] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.323396] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:241:plane 4B] because [FB:558] is removed
<7> [113.323449] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.323789] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.324119] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.324428] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.324715] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.325038] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.325337] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.325672] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.326006] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.326319] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.351008] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.351299] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200
<7> [113.351734] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.352136] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.352426] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.352714] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.353021] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.353334] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.353658] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.353973] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.354269] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.354615] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:241
<7> [113.356506] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.356572] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:241:plane 4B] because [FB:558] is removed
<7> [113.356608] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.9: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.356902] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:241:plane 4B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.357113] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.357309] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.357499] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.357676] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:241:plane 4B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.357865] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.358109] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.358318] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.358524] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.375112] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.375448] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.375988] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.376387] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.376746] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.377131] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.377486] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.377888] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [113.378280] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.378703] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.379040] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.379416] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:251
<7> [113.390168] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.390266] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:251:plane 5B] because [FB:558] is removed
<7> [113.390319] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.390764] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.391189] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.391533] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.391860] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.392244] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.392588] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.393007] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.393397] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.393751] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.408467] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.408763] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.409369] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.409814] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.410283] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.410671] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.411062] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.411480] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.411931] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.412354] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.412742] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.413218] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:251
<7> [113.423481] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.423578] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:251:plane 5B] because [FB:558] is removed
<7> [113.423630] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.424109] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.424435] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.424736] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.425078] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.425387] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.425703] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.426079] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.426401] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.426729] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.442412] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.442739] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.443378] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.443888] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.444314] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.444723] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.445155] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.445603] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.446106] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.446615] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.447032] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.447553] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:251
<7> [113.456630] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.456710] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:251:plane 5B] because [FB:558] is removed
<7> [113.456755] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.457126] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.457441] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.457695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.457997] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.458294] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.458570] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.458906] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.459221] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.459493] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.479912] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.480243] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.480757] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.481194] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.481551] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.481920] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.482231] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.482591] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 297000 num active planes 1
<7> [113.483000] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.483355] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.483692] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.484117] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:251
<7> [113.489919] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.489993] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:251:plane 5B] because [FB:558] is removed
<7> [113.490032] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.490308] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.490536] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.490757] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.491059] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.491290] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.491549] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.491837] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.492165] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.492433] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.515951] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.516160] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.516440] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.516653] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.516875] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.517071] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.517247] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.517437] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.517718] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.517934] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.518104] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.518256] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.518407] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.518552] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.518699] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.518885] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.519063] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.519228] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.519418] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:251
<7> [113.523111] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.523163] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:251:plane 5B] because [FB:558] is removed
<7> [113.523192] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.523398] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.523562] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.523709] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.523874] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.524019] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.524178] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.524356] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.524528] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.524690] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.547863] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.548028] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.548280] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.548466] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.548647] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.548819] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.549016] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.549192] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.549450] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.549625] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.549774] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.549935] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.550071] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.550204] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.550344] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.550568] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.550721] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.550867] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.551020] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.551143] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.551259] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.551382] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.551536] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.551680] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.551817] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.551995] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:251
<7> [113.556439] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.556484] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:251:plane 5B] because [FB:558] is removed
<7> [113.556509] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.556702] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.556871] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.557010] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.557140] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.557261] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.557398] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.557560] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.557711] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.557873] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.580381] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.580542] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400
<7> [113.580767] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 0) -> ( 0 - 4037), size 0 -> 4037
<7> [113.580980] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.581148] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.581304] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [113.581455] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [113.581621] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [113.581815] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 624 qgv_peak_bw: 48000
<7> [113.582035] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 624 qgv_peak_bw: 48000
<7> [113.582207] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 624
<7> [113.582405] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:267:pipe B] attached scaler id 1.0 to PLANE:251
<7> [113.590086] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.590161] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:251:plane 5B] because [FB:558] is removed
<7> [113.590202] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:267:pipe B] scaler_user index 1.10: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.590492] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:251:plane 5B] ddb ( 0 - 4037) -> ( 0 - 0), size 4037 -> 0
<7> [113.590713] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.590958] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.591147] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] blocks 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.591331] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:251:plane 5B] min_ddb 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.591543] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 0 num active planes 0
<7> [113.591781] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.592041] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.592250] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [113.609095] [IGT] kms_plane_scaling: finished subtest pipe-B, SUCCESS
<6> [113.611140] [IGT] kms_plane_scaling: starting dynamic subtest pipe-C
<7> [113.613413] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [113.616625] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.617407] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.617929] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [113.618550] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.619050] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [113.619487] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.622224] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.622920] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.623310] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [113.623812] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.624006] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [113.624689] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [113.624995] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.625523] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [113.628737] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.629512] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.629777] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [113.630200] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.630431] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [113.630655] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.632500] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:558]
<7> [113.633869] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:385:pipe C] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000
<7> [113.634035] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000
<7> [113.634188] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:385:pipe C] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [113.634341] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:385:pipe C]
<7> [113.634491] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [113.634630] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [113.634762] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [113.634907] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [113.635035] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 5190451/8388608 link 288358/524288, found tu 0, data 0/0 link 0/0)
<7> [113.635161] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)
<7> [113.635287] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [113.635409] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [113.635523] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [113.635633] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [113.635743] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [113.635856] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [113.635964] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [113.636068] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [113.636174] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [113.636274] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [113.636374] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [113.636472] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [113.636574] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [113.636674] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [113.636768] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [113.636868] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [113.636960] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [113.637054] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [113.637146] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [113.637238] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [113.637330] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [113.637426] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [113.637523] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [113.637617] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [113.637708] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [113.637799] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [113.637899] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [113.637989] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [113.638080] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [113.638169] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [113.638259] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [113.638349] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [113.638438] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in port_clock (expected 270000, found 0)
<7> [113.638528] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset
<7> [113.638622] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.enable (expected no, found yes)
<7> [113.638715] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.active (expected no, found yes)
<7> [113.638806] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in cpu_transcoder (expected -1, found 2)
<7> [113.638911] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in lane_count (expected 0, found 4)
<7> [113.639002] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5190451/8388608 link 288358/524288)
<7> [113.639093] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)
<7> [113.639183] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [113.639274] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [113.639363] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [113.639453] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [113.639544] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [113.639633] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [113.639723] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [113.639819] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [113.639909] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [113.639998] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [113.640089] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [113.640186] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [113.640276] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [113.640368] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [113.640460] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [113.640551] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [113.640641] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [113.640731] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [113.640824] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [113.640913] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [113.641002] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [113.641093] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [113.641184] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [113.641275] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [113.641367] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [113.641457] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [113.641547] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [113.641637] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [113.641728] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [113.641821] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in dpll_hw_state
<7> [113.641910] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [113.641999] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [113.642089] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 222750
<7> [113.642178] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [113.642268] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [113.642358] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x40e8
<7> [113.642448] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x7d20
<7> [113.642539] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0x0a06
<7> [113.642629] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0x8f1c
<7> [113.642720] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x0000
<7> [113.642817] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x0000
<7> [113.642907] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2200
<7> [113.642996] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0xffff
<7> [113.643085] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x0400
<7> [113.643174] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [113.643264] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0001
<7> [113.643352] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [113.643441] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [113.643529] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [113.643618] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 270000
<7> [113.643708] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [113.643797] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [113.643897] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x308c
<7> [113.643985] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x2110
<7> [113.644077] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0xcc9c
<7> [113.644173] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0xbfc1
<7> [113.644267] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x4b9a
<7> [113.644359] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x3f81
<7> [113.644450] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2000
<7> [113.644541] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0x0001
<7> [113.644635] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x5000
<7> [113.644725] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [113.644817] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [113.644909] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [113.644999] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [113.645089] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [113.645177] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [113.645265] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in port_clock (expected 0, found 270000)
<7> [113.645354] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:385:pipe C] fastset requirement not met, forcing full modeset
<7> [113.645443] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:267:pipe B] releasing TC PLL 2
<7> [113.645542] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.12: staged scaling request for 1824x988->1920x1080 scaler_users = 0x1000
<7> [113.645651] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xd (total dbuf slices 0xf), mbus joined? yes->no
<7> [113.645746] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x4
<7> [113.645845] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:385:pipe C] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x2 -> 0x4
<7> [113.645926] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb (4037 - 4096) -> ( 0 - 0), size 59 -> 0
<7> [113.646002] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:269:plane 1C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [113.646075] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:379:cursor C] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [113.646146] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:269:plane 1C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.646217] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:269:plane 1C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.646288] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:269:plane 1C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.646360] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:269:plane 1C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.646442] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 297000 num active planes 1
<7> [113.646539] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.646633] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.646723] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.646819] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:267:pipe B] min cdclk: 192000 kHz -> 0 kHz
<7> [113.646910] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:385:pipe C] min cdclk: 0 kHz -> 192000 kHz
<7> [113.647012] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 18563 kHz -> 4641 kHz
<7> [113.647117] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:385:pipe C] allocated TC PLL 2
<7> [113.647213] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:385:pipe C] reserving TC PLL 2
<7> [113.647308] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:385:pipe C] attached scaler id 2.0 to PLANE:269
<7> [113.647388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [modeset]
<7> [113.647487] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [NOFB], visible: no
<7> [113.647582] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no
<7> [113.647674] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no
<7> [113.647768] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no
<7> [113.647882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no
<7> [113.647973] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no
<7> [113.648064] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: yes [modeset]
<7> [113.648148] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [113.648229] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: C, pipe bpp: 36, dithering: 0
<7> [113.648311] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [113.648393] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [113.648474] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [113.648555] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [113.648637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [113.648718] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [113.648798] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [113.648895] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [113.648981] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [113.649067] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [113.649150] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [113.649233] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [113.649315] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [113.649398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [113.649479] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [113.649560] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [113.649642] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [113.649729] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [113.649816] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [113.649907] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [113.649990] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [113.650073] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [113.650155] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [113.650237] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000
<7> [113.650318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [113.650398] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x1000, scaler_id: -1, scaling_filter: 0
<7> [113.650478] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [113.650558] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [113.650637] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [113.650718] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000
<7> [113.650797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [113.650896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [113.650977] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [113.651056] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [113.651135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [113.651216] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [113.651295] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [113.651375] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [113.651455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [113.651535] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [113.651617] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [113.651702] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [113.651788] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [113.651882] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [113.651967] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [113.652048] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [113.652129] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [113.652209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.652289] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.652369] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.652450] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [113.652529] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [113.652609] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.652689] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.652769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.652859] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [113.652947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [113.653030] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:269:plane 1C] fb: [FB:558] 1920x1080 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes
<7> [113.653113] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [113.653194] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1824.000000x988.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [113.653275] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:299:plane 2C] fb: [NOFB], visible: no
<7> [113.653356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:329:plane 3C] fb: [NOFB], visible: no
<7> [113.653445] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:359:plane 4C] fb: [NOFB], visible: no
<7> [113.653533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:369:plane 5C] fb: [NOFB], visible: no
<7> [113.653620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:379:cursor C] fb: [NOFB], visible: no
<7> [113.654002] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [113.654159] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:267:pipe B]
<7> [113.672970] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [113.673180] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [113.693645] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x2, on? 1) for [CRTC:267:pipe B]
<7> [113.695406] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [113.695661] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]
<7> [113.695834] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]
<7> [113.695991] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]
<7> [113.696150] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]
<7> [113.696315] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]
<7> [113.696476] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]
<7> [113.696628] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]
<7> [113.696776] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]
<7> [113.696937] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]
<7> [113.697079] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]
<7> [113.697220] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]
<7> [113.697362] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]
<7> [113.697502] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]
<7> [113.697638] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]
<7> [113.697778] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]
<7> [113.697931] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]
<7> [113.698063] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:506:DP-1]
<7> [113.698195] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [113.698328] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [113.698464] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [113.698597] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:541:DP-3]
<7> [113.698724] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [113.698880] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [113.699028] xe 0000:03:00.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [113.699167] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x4, on? 0) for [CRTC:385:pipe C]
<7> [113.699301] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [113.703479] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [113.707072] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [113.708007] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [113.708455] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [113.709480] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [113.710057] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [113.716271] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [113.716741] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [113.723278] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [113.723732] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [113.724705] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe C
<7> [113.741918] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xd
<7> [113.742616] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [113.743325] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [113.744058] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:385:pipe C], 40 bytes ELD
<7> [113.758846] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]
<7> [113.759452] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [113.764094] xe 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe C
<7> [113.764631] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:558] from all active usage due to RMFB ioctl
<7> [113.764751] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:269:plane 1C] because [FB:558] is removed
<7> [113.764853] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.12: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.765357] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:269:plane 1C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [113.765850] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:269:plane 1C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.766294] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:269:plane 1C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.766726] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:269:plane 1C] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.767230] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:269:plane 1C] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.767671] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 0 num active planes 0
<7> [113.768165] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.768585] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.768997] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.777197] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:559]
<7> [113.777468] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.13: staged scaling request for 1824x988->1920x1080 scaler_users = 0x2000
<7> [113.777864] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:299:plane 2C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [113.778172] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:299:plane 2C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.778437] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:299:plane 2C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.778704] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:299:plane 2C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.778996] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:299:plane 2C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.779298] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 297000 num active planes 1
<7> [113.779601] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.779927] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.780218] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.780539] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:385:pipe C] attached scaler id 2.0 to PLANE:299
<7> [113.792406] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl
<7> [113.792503] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:299:plane 2C] because [FB:559] is removed
<7> [113.792559] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.13: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.793086] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:299:plane 2C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [113.793455] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:299:plane 2C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.793818] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:299:plane 2C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.794150] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:299:plane 2C] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.794448] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:299:plane 2C] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.794801] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 0 num active planes 0
<7> [113.795179] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.795503] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.795833] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.811116] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:559]
<7> [113.811508] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.14: staged scaling request for 1824x988->1920x1080 scaler_users = 0x4000
<7> [113.812121] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:329:plane 3C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [113.812574] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:329:plane 3C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.813011] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:329:plane 3C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.813409] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:329:plane 3C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.813765] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:329:plane 3C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.814261] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 297000 num active planes 1
<7> [113.814669] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.815121] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.815504] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.815972] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:385:pipe C] attached scaler id 2.0 to PLANE:329
<7> [113.825734] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl
<7> [113.825912] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:329:plane 3C] because [FB:559] is removed
<7> [113.825975] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.14: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.826355] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:329:plane 3C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [113.826649] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:329:plane 3C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.826970] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:329:plane 3C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.827251] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:329:plane 3C] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.827498] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:329:plane 3C] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.827756] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 0 num active planes 0
<7> [113.827816] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [113.828117] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.828422] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.828685] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.844360] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:559]
<7> [113.844759] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.15: staged scaling request for 1824x988->1920x1080 scaler_users = 0x8000
<7> [113.845425] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:359:plane 4C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [113.845869] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:359:plane 4C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.846268] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:359:plane 4C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.846659] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:359:plane 4C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.847058] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:359:plane 4C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.847437] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 297000 num active planes 1
<7> [113.847901] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.848307] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.848685] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.849183] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:385:pipe C] attached scaler id 2.0 to PLANE:359
<7> [113.858930] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl
<7> [113.859079] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:359:plane 4C] because [FB:559] is removed
<7> [113.859130] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.15: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.859450] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:359:plane 4C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [113.859733] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:359:plane 4C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.860113] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:359:plane 4C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.860405] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:359:plane 4C] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.860684] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:359:plane 4C] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.861058] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 0 num active planes 0
<7> [113.861419] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.861755] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.862131] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [113.877417] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:559]
<7> [113.877802] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.16: staged scaling request for 1824x988->1920x1080 scaler_users = 0x10000
<7> [113.878271] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:369:plane 5C] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [113.878640] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:369:plane 5C] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.879046] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:369:plane 5C] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.879390] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:369:plane 5C] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.879695] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:369:plane 5C] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.880076] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 297000 num active planes 1
<7> [113.880472] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.880856] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.881203] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.881600] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:385:pipe C] attached scaler id 2.0 to PLANE:369
<7> [113.892386] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl
<7> [113.892485] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:369:plane 5C] because [FB:559] is removed
<7> [113.892539] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:385:pipe C] scaler_user index 2.16: Staged freeing scaler id 0 scaler_users = 0x0
<7> [113.893006] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:369:plane 5C] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [113.893346] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:369:plane 5C] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [113.893663] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:369:plane 5C] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.893986] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:369:plane 5C] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.894266] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:369:plane 5C] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [113.894575] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:385:pipe C] data rate 0 num active planes 0
<7> [113.894992] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [113.895331] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [113.895645] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [113.911055] [IGT] kms_plane_scaling: finished subtest pipe-C, SUCCESS
<6> [113.913140] [IGT] kms_plane_scaling: starting dynamic subtest pipe-D
<7> [113.917021] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [113.920723] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.921479] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.921866] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [113.922337] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.922626] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [113.922931] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.925286] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.925810] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [113.926474] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.926701] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [113.927079] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.927277] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [113.927461] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.927802] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [113.930701] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.931354] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.931526] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [113.931837] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [113.931992] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [113.932144] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [113.933452] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:559]
<7> [113.934585] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:503:pipe D] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000
<7> [113.934705] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000
<7> [113.934826] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:503:pipe D] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [113.934935] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:503:pipe D]
<7> [113.935041] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.enable (expected yes, found no)
<7> [113.935147] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.active (expected yes, found no)
<7> [113.935246] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in cpu_transcoder (expected 2, found -1)
<7> [113.935343] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in lane_count (expected 4, found 0)
<7> [113.935437] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in dp_m_n (expected tu 64 data 5190451/8388608 link 288358/524288, found tu 0, data 0/0 link 0/0)
<7> [113.935530] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)
<7> [113.935622] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [113.935711] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [113.935816] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [113.935912] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [113.936004] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [113.936093] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [113.936183] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [113.936273] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [113.936363] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [113.936457] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [113.936547] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [113.936636] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [113.936725] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [113.936825] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [113.936915] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [113.937005] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [113.937096] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [113.937189] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [113.937281] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [113.937371] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [113.937461] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [113.937552] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [113.937642] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [113.937732] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [113.937833] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [113.937922] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [113.938011] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [113.938100] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [113.938190] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [113.938280] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [113.938369] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [113.938457] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [113.938545] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:385:pipe C] fastset requirement not met in port_clock (expected 270000, found 0)
<7> [113.938634] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:385:pipe C] fastset requirement not met, forcing full modeset
<7> [113.938724] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.enable (expected no, found yes)
<7> [113.938822] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.active (expected no, found yes)
<7> [113.938911] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in cpu_transcoder (expected -1, found 3)
<7> [113.938999] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in lane_count (expected 0, found 4)
<7> [113.939087] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5190451/8388608 link 288358/524288)
<7> [113.939179] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)
<7> [113.939268] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [113.939356] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [113.939447] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [113.939533] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [113.939626] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [113.939713] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [113.939811] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [113.939899] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [113.939987] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [113.940079] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [113.940172] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [113.940263] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [113.940353] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [113.940442] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [113.940531] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [113.940620] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [113.940708] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [113.940804] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [113.940898] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [113.940990] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [113.941080] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [113.941169] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [113.941258] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [113.941346] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [113.941434] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [113.941522] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [113.941609] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [113.941697] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [113.941793] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [113.941882] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [113.941970] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [113.942062] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [113.942154] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in port_clock (expected 0, found 270000)
<7> [113.942244] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:503:pipe D] fastset requirement not met, forcing full modeset
<7> [113.942335] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:385:pipe C] releasing TC PLL 2
<7> [113.942436] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.18: staged scaling request for 1824x988->1920x1080 scaler_users = 0x40000
<7> [113.942530] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xd -> 0x3 (total dbuf slices 0xf), mbus joined? no->no
<7> [113.942610] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:385:pipe C] dbuf slices 0xc -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x4 -> 0x8
<7> [113.942686] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:503:pipe D] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x4 -> 0x8
<7> [113.942769] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:379:cursor C] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0
<7> [113.942841] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:387:plane 1D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [113.942912] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:497:cursor D] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [113.942982] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:387:plane 1D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [113.943054] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:387:plane 1D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [113.943125] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:387:plane 1D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [113.943197] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:387:plane 1D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [113.943281] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [113.943379] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [113.943474] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [113.943567] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [113.943669] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:385:pipe C] min cdclk: 192000 kHz -> 0 kHz
<7> [113.943767] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:503:pipe D] min cdclk: 0 kHz -> 192000 kHz
<7> [113.943883] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:503:pipe D] allocated TC PLL 2
<7> [113.943978] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:503:pipe D] reserving TC PLL 2
<7> [113.944073] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:503:pipe D] attached scaler id 3.0 to PLANE:387
<7> [113.944154] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [modeset]
<7> [113.944252] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:269:plane 1C] fb: [NOFB], visible: no
<7> [113.944347] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:299:plane 2C] fb: [NOFB], visible: no
<7> [113.944440] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:329:plane 3C] fb: [NOFB], visible: no
<7> [113.944533] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:359:plane 4C] fb: [NOFB], visible: no
<7> [113.944628] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:369:plane 5C] fb: [NOFB], visible: no
<7> [113.944721] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:379:cursor C] fb: [NOFB], visible: no
<7> [113.944824] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: yes [modeset]
<7> [113.944912] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [113.944999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: D, pipe bpp: 36, dithering: 0
<7> [113.945088] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [113.945177] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [113.945265] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [113.945354] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [113.945441] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [113.945531] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [113.945620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [113.945708] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [113.945804] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [113.945892] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [113.945980] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [113.946072] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [113.946164] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [113.946254] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [113.946344] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [113.946432] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [113.946520] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [113.946608] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [113.946695] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [113.946792] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [113.946887] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [113.946977] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [113.947067] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [113.947156] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000
<7> [113.947247] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [113.947336] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x40000, scaler_id: -1, scaling_filter: 0
<7> [113.947425] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [113.947513] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [113.947600] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [113.947688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000
<7> [113.947785] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [113.947873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [113.947961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [113.948049] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [113.948137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [113.948225] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [113.948318] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [113.948409] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [113.948499] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [113.948588] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [113.948677] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [113.948769] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [113.948856] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [113.948944] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [113.949032] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [113.949121] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [113.949209] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [113.949296] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.949383] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.949471] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.949560] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [113.949653] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [113.949750] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.949844] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.949934] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [113.950023] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [113.950113] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [113.950203] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:387:plane 1D] fb: [FB:559] 1920x1080 format = RG16 little-endian (0x36314752) modifier = 0x0, visible: yes
<7> [113.950293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: 0, scaling_filter: 0
<7> [113.950382] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1824.000000x988.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [113.950472] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:417:plane 2D] fb: [NOFB], visible: no
<7> [113.950561] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:447:plane 3D] fb: [NOFB], visible: no
<7> [113.950649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:477:plane 4D] fb: [NOFB], visible: no
<7> [113.950738] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:487:plane 5D] fb: [NOFB], visible: no
<7> [113.950837] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:497:cursor D] fb: [NOFB], visible: no
<7> [113.951210] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [113.951369] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:385:pipe C]
<7> [113.975245] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [113.975446] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe C
<7> [113.995640] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x4, on? 1) for [CRTC:385:pipe C]
<7> [113.997448] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [113.997800] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]
<7> [113.998053] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]
<7> [113.998302] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]
<7> [113.998546] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]
<7> [113.998792] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]
<7> [113.999019] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]
<7> [113.999235] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]
<7> [113.999440] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]
<7> [113.999643] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]
<7> [113.999858] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]
<7> [114.000056] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]
<7> [114.000258] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]
<7> [114.000456] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]
<7> [114.000648] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]
<7> [114.000843] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]
<7> [114.001024] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]
<7> [114.001203] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:506:DP-1]
<7> [114.001390] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [114.001573] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [114.001772] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [114.001950] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:541:DP-3]
<7> [114.002123] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [114.002318] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [114.002620] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [114.002800] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x8, on? 0) for [CRTC:503:pipe D]
<7> [114.002974] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [114.007127] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [114.010864] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [114.011925] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [114.012391] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [114.013579] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [114.014249] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [114.021220] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [114.021663] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [114.028357] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [114.028830] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [114.029798] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe D
<7> [114.047048] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x3
<7> [114.047868] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [114.048506] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [114.049272] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:503:pipe D], 40 bytes ELD
<7> [114.063991] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]
<7> [114.064597] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [114.068275] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03061 0x28d10e72)
<7> [114.069844] xe 0000:03:00.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe D
<7> [114.070369] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:559] from all active usage due to RMFB ioctl
<7> [114.070496] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:387:plane 1D] because [FB:559] is removed
<7> [114.070569] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.18: Staged freeing scaler id 0 scaler_users = 0x0
<7> [114.071092] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:387:plane 1D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [114.071505] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:387:plane 1D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [114.071979] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:387:plane 1D] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.072383] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:387:plane 1D] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.072801] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:387:plane 1D] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.073190] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 0 num active planes 0
<7> [114.073640] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [114.074080] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [114.074464] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [114.082310] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [114.082585] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.19: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80000
<7> [114.083007] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:417:plane 2D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.083274] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.083520] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.083793] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.084030] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.084290] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.084670] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.19: staged scaling request for 1824x988->1920x1080 scaler_users = 0x80000
<7> [114.084932] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:417:plane 2D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.085119] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.085303] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.085487] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.085665] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.085880] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.086101] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [114.086316] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [114.086524] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [114.086776] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:503:pipe D] attached scaler id 3.0 to PLANE:417
<7> [114.097386] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [114.097444] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:417:plane 2D] because [FB:560] is removed
<7> [114.097478] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.19: Staged freeing scaler id 0 scaler_users = 0x0
<7> [114.097757] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:417:plane 2D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [114.097950] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [114.098131] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.098303] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.098470] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:417:plane 2D] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.098657] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 0 num active planes 0
<7> [114.098903] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [114.099107] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [114.099306] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [114.116180] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [114.116535] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.20: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100000
<7> [114.117090] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:447:plane 3D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.117510] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.117912] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.118257] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.118588] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.119015] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.119563] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.20: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100000
<7> [114.119949] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:447:plane 3D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.120266] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.120558] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.120872] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.121140] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.121417] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.121881] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.20: staged scaling request for 1824x988->1920x1080 scaler_users = 0x100000
<7> [114.122166] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:447:plane 3D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.122412] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.122636] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.122895] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.123111] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.123335] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.123604] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [114.123887] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [114.124126] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [114.124405] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:503:pipe D] attached scaler id 3.0 to PLANE:447
<7> [114.130605] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [114.130636] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:447:plane 3D] because [FB:560] is removed
<7> [114.130653] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.20: Staged freeing scaler id 0 scaler_users = 0x0
<7> [114.130789] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:447:plane 3D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [114.130879] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [114.130960] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.131038] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.131120] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:447:plane 3D] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.131206] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 0 num active planes 0
<7> [114.131308] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [114.131406] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [114.131505] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [114.131790] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [114.148886] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [114.149134] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.21: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200000
<7> [114.149459] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:477:plane 4D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.149780] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.150049] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.150309] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.150559] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.150875] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.151302] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.21: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200000
<7> [114.151566] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:477:plane 4D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.151816] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.152025] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.152232] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.152440] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.152645] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.153020] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.21: staged scaling request for 1824x988->1920x1080 scaler_users = 0x200000
<7> [114.153226] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:477:plane 4D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.153411] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.153587] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.153782] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.153954] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.154132] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.154363] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [114.154581] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [114.154815] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [114.155074] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:503:pipe D] attached scaler id 3.0 to PLANE:477
<7> [114.164023] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [114.164056] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:477:plane 4D] because [FB:560] is removed
<7> [114.164075] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.21: Staged freeing scaler id 0 scaler_users = 0x0
<7> [114.164207] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:477:plane 4D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [114.164313] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [114.164413] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.164516] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.164618] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:477:plane 4D] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.164780] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 0 num active planes 0
<7> [114.164927] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [114.165067] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [114.165202] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [114.182144] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [114.182411] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.22: staged scaling request for 1824x988->1920x1080 scaler_users = 0x400000
<7> [114.182819] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:487:plane 5D] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.183125] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:487:plane 5D] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.183406] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:487:plane 5D] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.183681] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:487:plane 5D] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150
<7> [114.183969] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:487:plane 5D] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151
<7> [114.184268] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 297000 num active planes 1
<7> [114.184605] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 312 qgv_peak_bw: 48000
<7> [114.184929] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 312 qgv_peak_bw: 48000
<7> [114.185216] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 312
<7> [114.185555] xe 0000:03:00.0: [drm:intel_atomic_setup_scaler [xe]] [CRTC:503:pipe D] attached scaler id 3.0 to PLANE:487
<7> [114.197550] xe 0000:03:00.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:560] from all active usage due to RMFB ioctl
<7> [114.197647] xe 0000:03:00.0: [drm:atomic_remove_fb] Disabling [PLANE:487:plane 5D] because [FB:560] is removed
<7> [114.197741] xe 0000:03:00.0: [drm:skl_update_scaler [xe]] [CRTC:503:pipe D] scaler_user index 3.22: Staged freeing scaler id 0 scaler_users = 0x0
<7> [114.198138] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:487:plane 5D] ddb ( 0 - 1989) -> ( 0 - 0), size 1989 -> 0
<7> [114.198444] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:487:plane 5D] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [114.198743] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:487:plane 5D] lines 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.199003] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:487:plane 5D] blocks 9, 28, 82, 82, 154, 154, 154, 154, 23, 136, 150 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.199255] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:487:plane 5D] min_ddb 11, 32, 92, 92, 171, 171, 0, 0, 24, 151, 151 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [114.199535] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:503:pipe D] data rate 0 num active planes 0
<7> [114.199889] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [114.200194] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [114.200486] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<6> [114.216137] [IGT] kms_plane_scaling: finished subtest pipe-D, SUCCESS
<6> [114.218262] [IGT] kms_plane_scaling: finished subtest plane-scaler-with-clipping-clamping-pixel-formats, SUCCESS
<7> [114.220258] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [114.223835] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [114.224558] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [114.224956] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [114.225450] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [114.225774] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [114.226077] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [114.228511] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [114.229191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [114.229441] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [114.229841] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [114.230074] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [114.230291] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [114.232549] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [114.232736] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
<7> [114.233346] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [114.233594] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [114.233967] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 003a w(1)
<7> [114.234156] xe 0000:03:00.0: [drm:intel_hdmi_hdcp_read_bksv [xe]] Read Bksv over DDC failed (-6)
<7> [114.234335] xe 0000:03:00.0: [drm:intel_hdcp_gsc_check_status [xe]] GSC Components not ready for HDCP2.x
<7> [114.234830] xe 0000:03:00.0: [drm:drm_mode_addfb2] [FB:560]
<7> [114.235706] xe 0000:03:00.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:524:DDI TC2/PHY G][CRTC:149:pipe A] DP link limits: pixel clock 148500 kHz DSC off max lanes 4 max rate 540000 max pipe_bpp 36 max link_bpp 36.0000
<7> [114.235868] xe 0000:03:00.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 270000 bpp input 36 compressed 0.0000 link rate required 668250 available 1080000
<7> [114.236022] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [114.236190] xe 0000:03:00.0: [drm:intel_hdmi_compute_clock [xe]] picking 12 bpc for HDMI output (pipe bpp: 36)
<7> [114.236337] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] hw max bpp: 36, pipe bpp: 36, dithering: 0
<7> [114.236493] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:524:DDI TC2/PHY G] [CRTC:149:pipe A]
<7> [114.236629] xe 0000:03:00.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:536:DDI TC3/PHY H] [CRTC:267:pipe B]
<7> [114.236772] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [114.236898] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [114.237023] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [114.237140] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [114.237255] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 5190451/8388608 link 288358/524288)
<7> [114.237370] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000080)
<7> [114.237479] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [114.237583] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [114.237695] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [114.237798] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [114.237900] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [114.237997] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [114.238094] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [114.238190] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [114.238286] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [114.238383] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1084)
<7> [114.238480] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1089)
<7> [114.238582] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [114.238689] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [114.238788] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [114.238890] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [114.238993] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [114.239093] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [114.239193] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [114.239296] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [114.239400] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [114.239499] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [114.239600] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1084)
<7> [114.239719] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1089)
<7> [114.239820] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [114.239920] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [114.240025] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [114.240126] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [114.240231] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 0, found 4)
<7> [114.240336] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in enhanced_framing (expected no, found yes)
<7> [114.240440] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [114.240542] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [114.240643] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [114.240751] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:149:pipe A] fastset requirement not met in port_clock (expected 0, found 270000)
<7> [114.240851] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:149:pipe A] fastset requirement not met, forcing full modeset
<7> [114.240950] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [114.241052] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [114.241155] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [114.241256] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [114.241356] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000040)
<7> [114.241456] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [114.241556] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 1920)
<7> [114.241654] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 2200)
<7> [114.241761] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 1920)
<7> [114.241859] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 2200)
<7> [114.241962] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2008)
<7> [114.242065] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2052)
<7> [114.242165] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1080)
<7> [114.242262] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1080)
<7> [114.242359] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1083)
<7> [114.242455] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1088)
<7> [114.242551] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1125)
<7> [114.242647] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1125)
<7> [114.242754] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 1920)
<7> [114.242851] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 2200)
<7> [114.242947] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 1920)
<7> [114.243047] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 2200)
<7> [114.243148] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2008)
<7> [114.243251] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2052)
<7> [114.243350] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1080)
<7> [114.243448] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1080)
<7> [114.243547] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1083)
<7> [114.243645] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1088)
<7> [114.243751] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1125)
<7> [114.243849] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1125)
<7> [114.243945] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [114.244043] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 0, found 1)
<7> [114.244139] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [114.244242] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in has_hdmi_sink (expected no, found yes)
<7> [114.244343] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in has_infoframe (expected no, found yes)
<7> [114.244442] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in dpll_hw_state
<7> [114.244539] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [114.244637] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [114.244742] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 270000
<7> [114.244840] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [114.244939] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [114.245037] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x308c
<7> [114.245136] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x2110
<7> [114.245239] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0xcc9c
<7> [114.245342] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0xbfc1
<7> [114.245443] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x4b9a
<7> [114.245544] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x3f81
<7> [114.245644] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2000
<7> [114.245750] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0x0001
<7> [114.245850] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x5000
<7> [114.245953] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [114.246055] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [114.246154] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [114.246253] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [114.246351] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [114.246450] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state: clock: 222750
<7> [114.246549] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [114.246651] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [114.246761] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[0] = 0x40e8
<7> [114.246859] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[1] = 0x7d20
<7> [114.246958] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[2] = 0x0a06
<7> [114.247054] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[3] = 0x8f1c
<7> [114.247150] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[4] = 0x0000
<7> [114.247246] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[5] = 0x0000
<7> [114.247342] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[6] = 0x2200
<7> [114.247438] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[7] = 0xffff
<7> [114.247538] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[8] = 0x0400
<7> [114.247639] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[9] = 0x0000
<7> [114.247745] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0001
<7> [114.247845] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [114.247942] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 36)
<7> [114.248040] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 148500)
<7> [114.248135] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 148500)
<7> [114.248231] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in port_clock (expected 0, found 222750)
<7> [114.248326] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in infoframes.enable (expected 0x00000000, found 0x00000071)
<7> [114.248423] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in infoframes.gcp (expected 0x00000000, found 0x00000006)
<7> [114.248521] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in avi infoframe
<7> [114.248617] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [114.248720] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [114.248817] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
<7> [114.248819] xe 0000:03:00.0: colorspace: RGB
<7> [114.248821] xe 0000:03:00.0: scan mode: Underscan
<7> [114.248822] xe 0000:03:00.0: colorimetry: No Data
<7> [114.248823] xe 0000:03:00.0: picture aspect: No Data
<7> [114.248824] xe 0000:03:00.0: active aspect: Same as Picture
<7> [114.248826] xe 0000:03:00.0: itc: No Data
<7> [114.248827] xe 0000:03:00.0: extended colorimetry: xvYCC 601
<7> [114.248828] xe 0000:03:00.0: quantization range: Full
<7> [114.248829] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling
<7> [114.248831] xe 0000:03:00.0: video code: 0
<7> [114.248832] xe 0000:03:00.0: ycc quantization range: Full
<7> [114.248833] xe 0000:03:00.0: hdmi content type: Graphics
<7> [114.248834] xe 0000:03:00.0: pixel repeat: 0
<7> [114.248836] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0
<7> [114.248837] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in spd infoframe
<7> [114.248941] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [114.249039] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [114.249137] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25
<7> [114.249139] xe 0000:03:00.0: vendor: Intel
<7> [114.249140] xe 0000:03:00.0: product: Discrete gfx
<7> [114.249141] xe 0000:03:00.0: source device information: PC General (0x9)
<7> [114.249143] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:267:pipe B] fastset requirement not met in hdmi infoframe
<7> [114.249241] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [114.249338] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [114.249434] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4
<7> [114.249436] xe 0000:03:00.0: empty frame
<7> [114.249437] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:267:pipe B] fastset requirement not met, forcing full modeset
<7> [114.249535] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.enable (expected yes, found no)
<7> [114.249633] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.active (expected yes, found no)
<7> [114.249743] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in cpu_transcoder (expected 3, found -1)
<7> [114.249847] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in lane_count (expected 4, found 0)
<7> [114.249947] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in dp_m_n (expected tu 64 data 5190451/8388608 link 288358/524288, found tu 0, data 0/0 link 0/0)
<7> [114.250048] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in output_types (expected 0x00000080, found 0x00000000)
<7> [114.250150] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [114.250250] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 1920, found 0)
<7> [114.250348] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 2200, found 0)
<7> [114.250448] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 1920, found 0)
<7> [114.250552] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 2200, found 0)
<7> [114.250653] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2008, found 0)
<7> [114.250772] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2052, found 0)
<7> [114.250875] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1080, found 0)
<7> [114.250975] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1080, found 0)
<7> [114.251077] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1084, found 0)
<7> [114.251182] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1089, found 0)
<7> [114.251284] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1125, found 0)
<7> [114.251386] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1125, found 0)
<7> [114.251491] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 1920, found 0)
<7> [114.251594] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 2200, found 0)
<7> [114.251754] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 1920, found 0)
<7> [114.251854] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 2200, found 0)
<7> [114.251952] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2008, found 0)
<7> [114.252052] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2052, found 0)
<7> [114.252148] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1080, found 0)
<7> [114.252245] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1080, found 0)
<7> [114.252341] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1084, found 0)
<7> [114.252437] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1089, found 0)
<7> [114.252535] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1125, found 0)
<7> [114.252632] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1125, found 0)
<7> [114.252736] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [114.252834] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.flags (1) (expected 1, found 0)
<7> [114.252931] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.flags (4) (expected 4, found 0)
<7> [114.253028] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in enhanced_framing (expected yes, found no)
<7> [114.253123] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in pipe_bpp (expected 36, found 0)
<7> [114.253220] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 148500, found 0)
<7> [114.253316] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 148500, found 0)
<7> [114.253411] xe 0000:03:00.0: [drm:intel_pipe_config_compare [xe]] [CRTC:503:pipe D] fastset requirement not met in port_clock (expected 270000, found 0)
<7> [114.253508] xe 0000:03:00.0: [drm:intel_atomic_check [xe]] [CRTC:503:pipe D] fastset requirement not met, forcing full modeset
<7> [114.253605] xe 0000:03:00.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:503:pipe D] releasing TC PLL 2
<7> [114.253736] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x3 -> 0xf (total dbuf slices 0xf), mbus joined? no->no
<7> [114.253824] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:149:pipe A] dbuf slices 0x0 -> 0x3, ddb (0 - 0) -> (0 - 2048), active pipes 0x8 -> 0x3
<7> [114.253909] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:267:pipe B] dbuf slices 0x0 -> 0xc, ddb (0 - 0) -> (0 - 2048), active pipes 0x8 -> 0x3
<7> [114.253991] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [CRTC:503:pipe D] dbuf slices 0x3 -> 0x0, ddb (0 - 2048) -> (0 - 0), active pipes 0x8 -> 0x3
<7> [114.254076] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.254160] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:143:cursor A] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [114.254240] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.254318] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.254395] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [114.254471] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [114.254547] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:151:plane 1B] ddb ( 0 - 0) -> ( 0 - 1989), size 0 -> 1989
<7> [114.254622] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:261:cursor B] ddb ( 0 - 0) -> (1989 - 2048), size 0 -> 59
<7> [114.254707] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [114.254782] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 3, 9, 9, 17, 17, 17, 17, 0, 15, 0
<7> [114.254859] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 16, 49, 145, 145, 273, 273, 273, 273, 30, 241, 255
<7> [114.254936] xe 0000:03:00.0: [drm:skl_print_plane_changes [xe]] [PLANE:151:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 19, 55, 161, 161, 302, 302, 0, 0, 31, 267, 267
<7> [114.255014] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] [PLANE:497:cursor D] ddb (1989 - 2048) -> ( 0 - 0), size 59 -> 0
<7> [114.255105] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:149:pipe A] data rate 594000 num active planes 1
<7> [114.255210] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] [CRTC:267:pipe B] data rate 594000 num active planes 1
<7> [114.255314] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 1248 qgv_peak_bw: 48000
<7> [114.255416] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 1248 qgv_peak_bw: 48000
<7> [114.255517] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 1248
<7> [114.255628] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:149:pipe A] min cdclk: 0 kHz -> 192000 kHz
<7> [114.255738] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:267:pipe B] min cdclk: 0 kHz -> 192000 kHz
<7> [114.255839] xe 0000:03:00.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:503:pipe D] min cdclk: 192000 kHz -> 0 kHz
<7> [114.255948] xe 0000:03:00.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 4641 kHz -> 18563 kHz
<7> [114.256058] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:149:pipe A] allocated TC PLL 2
<7> [114.256161] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:149:pipe A] reserving TC PLL 2
<7> [114.256262] xe 0000:03:00.0: [drm:intel_find_dpll [xe]] [CRTC:267:pipe B] allocated TC PLL 3
<7> [114.256363] xe 0000:03:00.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:267:pipe B] reserving TC PLL 3
<7> [114.256462] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: yes [modeset]
<7> [114.256567] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: DP (0x80), output format: RGB, sink format: RGB
<7> [114.256672] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 36, dithering: 0
<7> [114.256774] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [114.256873] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [114.256972] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [114.257070] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [114.257168] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5190451, data_n: 8388608, link_m: 288358, link_n: 524288, tu: 64
<7> [114.257265] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [114.257363] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [114.257459] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [114.257554] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [114.257649] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [114.257755] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 0, infoframes enabled: 0x0
<7> [114.257850] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 09 00 68 36 00 01 00 00 00 00 00 00 00 00
<7> [114.257946] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 61 a4 9a 00 44 50 46 39 30 34 33 35 09 07 07 11
<7> [114.258041] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 17 50 51 07 00 00 00 00
<7> [114.258137] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [114.258232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [114.258329] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 42 vsync start: 41, vsync end: 36
<7> [114.258426] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1083, vmax vblank: 1083, vmin vtotal: 1125, vmax vtotal: 1125
<7> [114.258523] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [114.258620] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<7> [114.258727] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [114.258825] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<7> [114.258922] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1084-1089 vt=1125, flags=0x5
<7> [114.259020] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000
<7> [114.259122] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [114.259221] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [114.259319] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [114.259415] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [114.259509] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [114.259603] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 270000
<7> [114.259705] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x4800, tx[2] = 0x0000
<7> [114.259802] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [114.259897] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x308c
<7> [114.259991] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x2110
<7> [114.260086] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0xcc9c
<7> [114.260181] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0xbfc1
<7> [114.260276] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x4b9a
<7> [114.260370] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x3f81
<7> [114.260464] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2000
<7> [114.260558] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0x0001
<7> [114.260652] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x5000
<7> [114.260757] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [114.260852] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0000
<7> [114.260947] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x42, hdmi rate: 0x00
<7> [114.261040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [114.261135] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [114.261236] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [114.261334] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.261435] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.261534] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.261633] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [114.261739] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [114.261839] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.261942] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.262040] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.262139] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [114.262236] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [114.262332] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [114.262429] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [114.262524] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [114.262621] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 2A] fb: [NOFB], visible: no
<7> [114.262723] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:93:plane 3A] fb: [NOFB], visible: no
<7> [114.262819] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:123:plane 4A] fb: [NOFB], visible: no
<7> [114.262914] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:133:plane 5A] fb: [NOFB], visible: no
<7> [114.263008] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:143:cursor A] fb: [NOFB], visible: no
<7> [114.263103] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: yes [modeset]
<7> [114.263199] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: HDMI (0x40), output format: RGB, sink format: RGB
<7> [114.263294] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 36, dithering: 0
<7> [114.263388] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [114.263481] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [114.263575] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [114.263675] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [114.263776] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] audio: 1, infoframes: 1, infoframes enabled: 0x71
<7> [114.263875] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] GCP: 0x6
<7> [114.263971] xe 0000:03:00.0: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
<7> [114.263973] xe 0000:03:00.0: colorspace: RGB
<7> [114.263974] xe 0000:03:00.0: scan mode: Underscan
<7> [114.263976] xe 0000:03:00.0: colorimetry: No Data
<7> [114.263977] xe 0000:03:00.0: picture aspect: No Data
<7> [114.263978] xe 0000:03:00.0: active aspect: Same as Picture
<7> [114.263979] xe 0000:03:00.0: itc: No Data
<7> [114.263981] xe 0000:03:00.0: extended colorimetry: xvYCC 601
<7> [114.263982] xe 0000:03:00.0: quantization range: Full
<7> [114.263983] xe 0000:03:00.0: nups: Unknown Non-uniform Scaling
<7> [114.263984] xe 0000:03:00.0: video code: 0
<7> [114.263986] xe 0000:03:00.0: ycc quantization range: Full
<7> [114.263987] xe 0000:03:00.0: hdmi content type: Graphics
<7> [114.263988] xe 0000:03:00.0: pixel repeat: 0
<7> [114.263989] xe 0000:03:00.0: bar top 0, bottom 0, left 0, right 0
<7> [114.263991] xe 0000:03:00.0: HDMI infoframe: Source Product Description (SPD), version 1, length 25
<7> [114.263992] xe 0000:03:00.0: vendor: Intel
<7> [114.263993] xe 0000:03:00.0: product: Discrete gfx
<7> [114.263995] xe 0000:03:00.0: source device information: PC General (0x9)
<7> [114.263996] xe 0000:03:00.0: HDMI infoframe: Vendor, version 1, length 4
<7> [114.263998] xe 0000:03:00.0: empty frame
<7> [114.263999] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 10 00 08 00 6d 10 00 01 00 00 00 00 00 00 00 00
<7> [114.264096] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 24 96 11 ed 41 4f 43 32 38 45 38 35 30 2e 48 44
<7> [114.264197] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ELD: 52 09 07 07
<7> [114.264293] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [114.264389] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [114.264486] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1125, vmax: 1125, flipline: 1125, pipeline full: 0, guardband: 45 vsync start: 42, vsync end: 37
<7> [114.264583] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1080, vmax vblank: 1080, vmin vtotal: 1125, vmax vtotal: 1125
<7> [114.264688] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] requested mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9
<7> [114.264783] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x48 0x9
<7> [114.264877] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9
<7> [114.264972] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1083 1088 1125 0x40 0x9
<7> [114.265068] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=148500, hd=1920 hb=1920-2200 hs=2008-2052 ht=2200, vd=1080 vb=1080-1125 vs=1083-1088 vt=1125, flags=0x9
<7> [114.265163] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] port clock: 222750, pipe src: 1920x1080+0+0, pixel rate 148500, min cdclk 192000
<7> [114.265258] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] linetime: 119, ips linetime: 0
<7> [114.265352] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [114.265446] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [114.265541] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [114.265634] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [114.265738] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] c20pll_hw_state: clock: 222750
<7> [114.265833] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] tx[0] = 0xbe88, tx[1] = 0x5800, tx[2] = 0x0000
<7> [114.265928] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] cmn[0] = 0x0500, cmn[1] = 0x0005, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [114.266022] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[0] = 0x40e8
<7> [114.266119] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[1] = 0x7d20
<7> [114.266214] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[2] = 0x0a06
<7> [114.266309] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[3] = 0x8f1c
<7> [114.266405] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[4] = 0x0000
<7> [114.266501] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[5] = 0x0000
<7> [114.266602] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[6] = 0x2200
<7> [114.266709] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[7] = 0xffff
<7> [114.266806] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[8] = 0x0400
<7> [114.266905] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[9] = 0x0000
<7> [114.267002] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] mpllb[10] = 0x0001
<7> [114.267098] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [114.267195] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [114.267292] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [114.267391] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [114.267494] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.267593] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.267698] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.267797] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [114.267893] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [114.267989] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.268085] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.268179] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [114.268282] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [114.268377] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [114.268472] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:151:plane 1B] fb: [FB:553] 1920x1080 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [114.268568] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [114.268663] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] src: 1920.000000x1080.000000+0.000000+0.000000 dst: 1920x1080+0+0
<7> [114.268771] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:181:plane 2B] fb: [NOFB], visible: no
<7> [114.268867] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:211:plane 3B] fb: [NOFB], visible: no
<7> [114.268966] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:241:plane 4B] fb: [NOFB], visible: no
<7> [114.269065] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:251:plane 5B] fb: [NOFB], visible: no
<7> [114.269162] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:261:cursor B] fb: [NOFB], visible: no
<7> [114.269259] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [modeset]
<7> [114.269356] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:387:plane 1D] fb: [NOFB], visible: no
<7> [114.269451] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:417:plane 2D] fb: [NOFB], visible: no
<7> [114.269545] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:447:plane 3D] fb: [NOFB], visible: no
<7> [114.269639] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:477:plane 4D] fb: [NOFB], visible: no
<7> [114.269740] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:487:plane 5D] fb: [NOFB], visible: no
<7> [114.269836] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [PLANE:497:cursor D] fb: [NOFB], visible: no
<7> [114.270175] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [114.270325] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [114.270468] xe 0000:03:00.0: [drm:intel_audio_codec_disable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Disable audio codec on [CRTC:503:pipe D]
<7> [114.297003] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [114.297282] xe 0000:03:00.0: [drm:intel_disable_transcoder [xe]] disabling pipe D
<7> [114.317108] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling AUX_TC2
<7> [114.318945] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disable TC PLL 2 (active 0x8, on? 1) for [CRTC:503:pipe D]
<7> [114.320634] xe 0000:03:00.0: [drm:intel_dpll_disable [xe]] disabling TC PLL 2
<7> [114.320849] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e030b2 0x28d10e73)
<7> [114.320964] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:505:DDI TC1/PHY F]
<7> [114.321071] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:507:DP-MST A]
<7> [114.321176] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:508:DP-MST B]
<7> [114.321279] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:509:DP-MST C]
<7> [114.321385] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:510:DP-MST D]
<7> [114.321492] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:524:DDI TC2/PHY G]
<7> [114.321595] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:526:DP-MST A]
<7> [114.321714] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:527:DP-MST B]
<7> [114.321822] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:528:DP-MST C]
<7> [114.321928] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:529:DP-MST D]
<7> [114.322032] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:536:DDI TC3/PHY H]
<7> [114.322139] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:540:DDI TC4/PHY I]
<7> [114.322250] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:542:DP-MST A]
<7> [114.322358] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:543:DP-MST B]
<7> [114.322464] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:544:DP-MST C]
<7> [114.322566] xe 0000:03:00.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:545:DP-MST D]
<7> [114.322691] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [114.322897] xe 0000:03:00.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 2 (mbus joined: no)
<7> [114.323021] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 2 (active 0x1, on? 0) for [CRTC:149:pipe A]
<7> [114.323134] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 2
<7> [114.327107] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [114.330603] xe 0000:03:00.0: [drm:intel_dp_init_lttpr_and_dprx_caps [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] LTTPR common capabilities: 00 00 00 00 00 00 00 00
<7> [114.331449] xe 0000:03:00.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX USBC2/DDI TC2/PHY G: DPCD: 12 14 c4 01 01 15 01 81 00 01 04 01 0f 00 01
<7> [114.331893] xe 0000:03:00.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using LINK_BW_SET value 0a
<7> [114.332891] xe 0000:03:00.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [114.333408] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS1
<7> [114.340133] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Clock recovery OK
<7> [114.340577] xe 0000:03:00.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Using DP training pattern TPS3
<7> [114.347152] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Channel EQ done. DP Training successful
<7> [114.347624] xe 0000:03:00.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G][DPRX] Link Training passed at link rate = 270000, lane count = 4
<7> [114.348493] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [114.348938] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enable TC PLL 3 (active 0x2, on? 0) for [CRTC:267:pipe B]
<7> [114.349133] xe 0000:03:00.0: [drm:intel_dpll_enable [xe]] enabling TC PLL 3
<7> [114.351556] xe 0000:03:00.0: [drm:intel_enable_transcoder [xe]] enabling pipe B
<7> [114.351836] xe 0000:03:00.0: [drm:intel_hdmi_handle_sink_scrambling [xe]] [CONNECTOR:537:HDMI-A-3] scrambling=no, TMDS bit clock ratio=1/10
<7> [114.352191] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1)
<7> [114.352388] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK on first message, retry
<7> [114.352721] xe 0000:03:00.0: [drm:do_gmbus_xfer [xe]] GMBUS [i915 gmbus tc3] NAK for addr: 0054 w(1)
<7> [114.352902] xe 0000:03:00.0: [drm:drm_scdc_set_high_tmds_clock_ratio [drm_display_helper]] [CONNECTOR:537:HDMI-A-3] Failed to read TMDS config: -6
<7> [114.352923] xe 0000:03:00.0: [drm:intel_ddi_enable [xe]] [CONNECTOR:537:HDMI-A-3] Failed to configure sink scrambling/TMDS bit clock ratio
<7> [114.370381] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:525:DP-2][ENCODER:524:DDI TC2/PHY G] Enable audio codec on [CRTC:149:pipe A], 40 bytes ELD
<7> [114.382540] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:525:DP-2]
<7> [114.383117] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [114.387052] xe 0000:03:00.0: [drm:intel_audio_codec_enable [xe]] [CONNECTOR:537:HDMI-A-3][ENCODER:536:DDI TC3/PHY H] Enable audio codec on [CRTC:267:pipe B], 36 bytes ELD
<7> [114.403593] xe 0000:03:00.0: [drm:audio_config_hdmi_pixel_clock [xe]] Configuring HDMI audio for pixel clock 148500 (0x00090000)
<7> [114.404281] xe 0000:03:00.0: [drm:hsw_audio_config_update [xe]] using automatic N
<7> [114.405082] xe 0000:03:00.0: [drm:verify_connector_state [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [114.405669] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [114.409468] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [114.410119] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [114.411342] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [114.412801] [IGT] kms_plane_scaling: exiting, ret=0
<6> [114.433565] Console: switching to colour frame buffer device 240x67
<7> [114.451688] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling AUX_TC2
|