Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 0.81 seconds |
| Igt-Version |
IGT-Version: 2.3-g829d402dc (x86_64) (Linux: 6.19.0-rc1-lgci-xe-xe-4265-31985bb0a701138a0+ x86_64) |
| Out |
Using IGT_SRANDOM=1766061307 for randomisation Starting subtest: load Opened device: /dev/dri/card0 Subtest load: SUCCESS (0.814s) |
| Err |
Starting subtest: load Subtest load: SUCCESS (0.814s) |
| Dmesg |
<6> [115.677954] [IGT] xe_module_load: executing
<4> [115.678000] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [115.681600] [IGT] xe_module_load: starting subtest load
<5> [116.005289] Setting dangerous option force_probe - tainting kernel
<6> [116.008589] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [116.010070] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<6> [116.010391] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [116.010399] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [116.010511] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [116.010604] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [116.010700] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [116.013235] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<6> [116.013262] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [116.013264] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [116.013265] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [116.013267] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [116.055649] xe 0000:03:00.0: [drm:xe_devm_add [xe]] Added tile 0 memory [4000000000-42fb800000] to devm, remapped to [mem 0x3d00000000-0x3fffffffff flags 0x80000200]
<7> [116.055902] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [116.056049] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [116.056159] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [116.056273] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [116.056371] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [116.056468] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [116.056573] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [116.056677] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [116.056786] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [116.056902] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [116.057015] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [116.057117] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [116.057213] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [116.057310] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [116.058142] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [116.071542] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [116.071655] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [116.071766] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [116.071879] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [116.071979] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [116.072082] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [116.072181] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 848)
<7> [116.072275] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [116.072367] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [116.072479] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [116.072579] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [116.072676] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [116.072783] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [116.072887] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [116.072986] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [116.073079] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [116.073176] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [116.073269] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [116.073363] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [116.073455] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [116.073547] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [116.073648] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [116.073751] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [116.073852] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [116.073946] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [116.074036] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [116.074125] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [116.074214] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [116.074302] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [116.074397] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [116.074527] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [116.074673] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [116.074818] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [116.075003] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [116.075183] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [116.075287] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [116.075388] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [116.075521] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6> [116.075630] xe 0000:03:00.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=none
<7> [116.075655] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [116.075786] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [116.075906] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [116.076014] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [116.076620] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [116.077448] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [116.077604] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [116.077730] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [116.077840] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [116.077942] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [116.078043] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [116.078139] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [116.078230] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [116.078318] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [116.078406] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [116.078492] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [116.078577] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [116.078663] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [116.078764] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [116.078857] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [116.078947] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [116.079037] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [116.079131] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [116.080607] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [116.080750] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [116.080869] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [116.080978] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [116.081081] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [116.081180] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [116.081285] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [116.081384] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [116.081483] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [116.081581] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [116.081679] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [116.081799] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [116.081904] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [116.082009] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [116.082114] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [116.082218] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [116.082325] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [116.082430] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [116.082531] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [116.082638] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [116.082751] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [116.082854] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [116.082958] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [116.083059] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [116.083167] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [116.083276] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [116.083388] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [116.083498] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [116.083604] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [116.083706] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [116.085409] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [116.092623] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [116.092768] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [116.092880] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [116.093086] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:505:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<6> [116.093576] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [116.093555] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:505:DDI TC1/PHY F]
<7> [116.094083] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:505:DDI TC1/PHY F]
<7> [116.094210] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:505:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [116.094570] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:524:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [116.094709] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:524:DDI TC2/PHY G]
<7> [116.095083] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:524:DDI TC2/PHY G]
<7> [116.095191] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:524:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [116.095388] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:536:DDI TC3/PHY H]
<7> [116.095486] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:536:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [116.095677] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:540:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [116.095814] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:540:DDI TC4/PHY I]
<7> [116.096097] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:540:DDI TC4/PHY I]
<7> [116.096204] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:540:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [116.096597] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] hw state readout: disabled
<7> [116.096751] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] hw state readout: disabled
<7> [116.096887] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] hw state readout: disabled
<7> [116.097022] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] hw state readout: disabled
<7> [116.097118] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: disabled, pipe A
<7> [116.097214] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] hw state readout: disabled, pipe A
<7> [116.097310] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] hw state readout: disabled, pipe A
<7> [116.097406] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] hw state readout: disabled, pipe A
<7> [116.097508] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] hw state readout: disabled, pipe A
<7> [116.097605] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] hw state readout: disabled, pipe A
<7> [116.097702] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] hw state readout: disabled, pipe B
<7> [116.097806] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] hw state readout: disabled, pipe B
<7> [116.097903] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] hw state readout: disabled, pipe B
<7> [116.098002] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] hw state readout: disabled, pipe B
<7> [116.098096] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] hw state readout: disabled, pipe B
<7> [116.098189] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] hw state readout: disabled, pipe B
<7> [116.098280] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] hw state readout: disabled, pipe C
<7> [116.098371] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] hw state readout: disabled, pipe C
<7> [116.098463] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] hw state readout: disabled, pipe C
<7> [116.098554] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] hw state readout: disabled, pipe C
<7> [116.098643] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] hw state readout: disabled, pipe C
<7> [116.098736] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] hw state readout: disabled, pipe C
<7> [116.098839] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] hw state readout: disabled, pipe D
<7> [116.098938] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] hw state readout: disabled, pipe D
<7> [116.099039] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] hw state readout: disabled, pipe D
<7> [116.099136] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] hw state readout: disabled, pipe D
<7> [116.099229] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] hw state readout: disabled, pipe D
<7> [116.099321] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] hw state readout: disabled, pipe D
<7> [116.099414] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:505:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [116.099502] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:507:DP-MST A] hw state readout: disabled, pipe A
<7> [116.099592] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST B] hw state readout: disabled, pipe B
<7> [116.099688] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST C] hw state readout: disabled, pipe C
<7> [116.099789] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST D] hw state readout: disabled, pipe D
<7> [116.099888] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:524:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [116.099986] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:526:DP-MST A] hw state readout: disabled, pipe A
<7> [116.100086] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST B] hw state readout: disabled, pipe B
<7> [116.100180] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST C] hw state readout: disabled, pipe C
<7> [116.100270] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST D] hw state readout: disabled, pipe D
<7> [116.100360] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:536:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [116.100450] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:540:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [116.100537] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:542:DP-MST A] hw state readout: disabled, pipe A
<7> [116.100623] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST B] hw state readout: disabled, pipe B
<7> [116.100708] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST C] hw state readout: disabled, pipe C
<7> [116.100809] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST D] hw state readout: disabled, pipe D
<7> [116.100909] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [116.101024] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [116.101130] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [116.101233] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [116.101333] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [116.101432] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [116.101530] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [116.101640] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:506:DP-1] hw state readout: disabled
<7> [116.101757] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:519:HDMI-A-1] hw state readout: disabled
<7> [116.101863] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:525:DP-2] hw state readout: disabled
<7> [116.101962] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:533:HDMI-A-2] hw state readout: disabled
<7> [116.102055] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:537:HDMI-A-3] hw state readout: disabled
<7> [116.102148] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:541:DP-3] hw state readout: disabled
<7> [116.102238] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:549:HDMI-A-4] hw state readout: disabled
<7> [116.102324] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 0 kHz
<7> [116.102411] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 2A] min_cdclk 0 kHz
<7> [116.102496] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 3A] min_cdclk 0 kHz
<7> [116.102580] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:123:plane 4A] min_cdclk 0 kHz
<7> [116.102663] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:133:plane 5A] min_cdclk 0 kHz
<7> [116.102761] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:143:cursor A] min_cdclk 0 kHz
<7> [116.102846] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:149:pipe A] min_cdclk 0 kHz
<7> [116.102936] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1B] min_cdclk 0 kHz
<7> [116.103031] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 2B] min_cdclk 0 kHz
<7> [116.103120] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:211:plane 3B] min_cdclk 0 kHz
<7> [116.103213] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:241:plane 4B] min_cdclk 0 kHz
<7> [116.103303] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:251:plane 5B] min_cdclk 0 kHz
<7> [116.103390] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:261:cursor B] min_cdclk 0 kHz
<7> [116.103474] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:267:pipe B] min_cdclk 0 kHz
<7> [116.103559] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:269:plane 1C] min_cdclk 0 kHz
<7> [116.103644] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:299:plane 2C] min_cdclk 0 kHz
<7> [116.103738] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:329:plane 3C] min_cdclk 0 kHz
<7> [116.103827] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:359:plane 4C] min_cdclk 0 kHz
<7> [116.103916] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:369:plane 5C] min_cdclk 0 kHz
<7> [116.104010] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:379:cursor C] min_cdclk 0 kHz
<7> [116.104108] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:385:pipe C] min_cdclk 0 kHz
<7> [116.104204] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:387:plane 1D] min_cdclk 0 kHz
<7> [116.104293] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:417:plane 2D] min_cdclk 0 kHz
<7> [116.104383] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:447:plane 3D] min_cdclk 0 kHz
<7> [116.104469] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:477:plane 4D] min_cdclk 0 kHz
<7> [116.104554] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:487:plane 5D] min_cdclk 0 kHz
<7> [116.104640] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:497:cursor D] min_cdclk 0 kHz
<7> [116.104738] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:503:pipe D] min_cdclk 0 kHz
<7> [116.104832] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:149:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [116.104937] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:267:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [116.105035] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:385:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [116.105129] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:503:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [116.105229] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [116.105351] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [116.105463] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [116.105569] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [116.105701] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [116.105896] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [setup_hw_state]
<7> [116.106014] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [setup_hw_state]
<7> [116.106125] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [setup_hw_state]
<7> [116.106232] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [setup_hw_state]
<7> [116.106334] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [116.110593] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [116.113829] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0065f3f7
<7> [116.113934] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [116.114012] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [116.114085] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [116.114155] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000ee8
<7> [116.114224] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [116.114290] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [116.114356] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [116.114420] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [116.114484] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [116.114549] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [116.114612] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [116.114679] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [116.114755] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [116.114828] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [116.114944] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [116.125740] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [116.126510] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [116.126743] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000fffff
<7> [116.126830] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000fffff
<7> [116.126910] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [116.126992] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [116.127069] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [116.215959] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [116.215961] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [116.216111] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [116.216213] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [116.216309] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [116.216396] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [116.216511] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [116.216626] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [116.216767] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [116.216853] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [116.216939] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [116.217019] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [116.217144] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [116.217218] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [116.217296] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [116.217371] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [116.218635] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [116.218736] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [116.218838] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [116.218923] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x55555440
<7> [116.219006] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [116.219089] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [116.219176] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [116.219257] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [116.219339] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [116.219416] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [116.219495] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [116.219569] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [116.219641] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [116.219712] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [116.219794] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [116.219863] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [116.219937] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [116.220014] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [116.220088] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [116.220161] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [116.220231] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [116.220300] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [116.220368] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [116.220436] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [116.220504] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [116.220573] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [116.220656] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [116.220740] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [116.220825] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [116.220912] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc
<7> [116.220996] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01
<7> [116.221076] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c
<7> [116.221152] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [116.221229] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [116.221305] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [116.221386] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [116.221465] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [116.221542] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [116.221622] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [116.221701] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [116.221792] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [116.221878] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [116.222206] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [116.222303] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [116.222389] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [116.222470] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [116.222951] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [116.223048] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [116.223131] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [116.223208] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [116.223499] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [116.223574] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [116.223648] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [116.223720] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [116.223820] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [116.223911] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [116.223994] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [116.224467] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [116.224542] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [116.224620] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [116.224699] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [116.224787] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [116.224869] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [116.224948] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [116.225641] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [116.230206] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0107f3f7
<7> [116.230292] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [116.230369] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [116.230444] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [116.230517] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00002328
<7> [116.230586] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [116.230652] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [116.230717] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [116.230802] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [116.230873] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [116.230942] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [116.231014] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [116.231088] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [116.231160] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [116.231257] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [116.231416] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [116.233559] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0x627000 for xe_guc_buf_cache_init_with_size [xe]
<7> [116.235111] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [116.236115] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [116.256739] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056)
<7> [116.267551] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [116.267868] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [116.268679] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords
<7> [116.268829] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [116.268913] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x01400140
<7> [116.268989] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [116.269068] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [116.269151] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [116.269232] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [116.269312] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [116.269394] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000
<7> [116.271781] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [116.271868] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [116.271946] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [116.273850] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [116.273946] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [116.277438] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [116.278699] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.55.3
<7> [116.280871] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x01a183f7
<7> [116.280969] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [116.281054] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [116.281134] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [116.281209] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x0000365a
<7> [116.281283] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [116.281356] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [116.281428] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [116.281498] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [116.281568] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [116.281637] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [116.281705] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [116.281797] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [116.281869] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [116.283166] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [116.283634] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [116.283786] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [116.294735] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [116.295087] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [116.295208] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,0000ff00
<7> [116.295309] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,0000ff00
<7> [116.295404] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [116.295495] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [116.295585] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [116.295682] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [116.295684] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [116.295685] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [116.295686] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [116.295687] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [116.295688] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [116.295689] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [116.295690] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [116.295694] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [116.295930] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [116.296049] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [116.296164] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [116.296275] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [116.296384] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [116.296482] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [116.296579] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [116.296674] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [116.296780] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [116.296879] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [116.297065] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [116.297152] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [116.297242] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [116.297328] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [116.297419] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [116.297503] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [116.297587] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [116.297673] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [116.297772] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [116.297869] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [116.298049] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [116.298133] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [116.298221] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [116.298305] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [116.298389] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [116.298477] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [116.298567] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [116.298657] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [116.298795] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [116.298904] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [116.299086] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [116.299168] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [116.299252] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [116.299336] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [116.299421] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [116.299504] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [116.299586] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [116.299675] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [116.299777] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [116.299865] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [116.301178] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [116.301275] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [116.301369] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [116.301454] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [116.301540] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [116.301626] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [116.301728] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [116.301826] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [116.301916] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [116.302001] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [116.302087] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [116.302169] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [116.302248] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [116.302324] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [116.302405] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [116.302489] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [116.302567] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [116.302645] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [116.302721] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [116.302813] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [116.302889] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [116.302966] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [116.303040] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [116.303114] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [116.303188] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [116.303281] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [116.303373] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [116.303468] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [116.303560] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [116.303644] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [116.303731] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [116.303811] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [116.303894] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [116.303978] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [116.304060] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [116.304141] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [116.304360] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [116.304472] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [116.304577] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [116.304660] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [116.304746] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [116.304826] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [116.304914] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [116.305001] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [116.305084] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [116.305166] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [116.305249] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [116.305337] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [116.305546] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [116.305631] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [116.305712] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [116.305813] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [116.305902] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [116.305986] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [116.306067] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [116.306148] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [116.306225] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [116.306303] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [116.306383] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [116.306468] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [116.306679] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [116.306775] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [116.306859] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [116.306949] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [116.307036] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [116.307119] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [116.307201] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [116.307280] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [116.307359] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [116.307445] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [116.307531] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [116.307613] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [116.308052] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [116.310919] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x024403f7
<7> [116.311016] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [116.311100] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [116.311183] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [116.311261] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00004aaa
<7> [116.311336] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [116.311409] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [116.311480] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [116.311550] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [116.311619] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [116.311689] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [116.311775] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [116.311845] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [116.311914] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [116.312006] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [116.312107] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [116.313368] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x1a18000 for xe_guc_buf_cache_init_with_size [xe]
<7> [116.332636] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 45056)
<7> [116.342740] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [116.343048] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [116.343494] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [116.343596] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [116.345033] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [116.345122] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [116.356732] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [116.357259] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [116.357425] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [116.357575] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [116.357719] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=224, pf_queue->size=131072
<7> [116.358817] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [116.358947] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [116.359391] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [116.359449] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [116.359560] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [116.359661] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [116.359797] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [116.360432] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 0: start 0x90008
<7> [116.360561] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 1: start 0x90108
<7> [116.360678] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 2: start 0x90208
<7> [116.360797] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 3: start 0x90308
<7> [116.360896] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:149:pipe A] FQ 4: start 0x903c8
<7> [116.360989] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 0: start 0x98008
<7> [116.361080] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 1: start 0x98108
<7> [116.361179] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 2: start 0x98208
<7> [116.361274] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 3: start 0x98308
<7> [116.361368] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:267:pipe B] FQ 4: start 0x983c8
<7> [116.361459] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 0: start 0x52008
<7> [116.361550] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 1: start 0x52108
<7> [116.361639] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 2: start 0x52208
<7> [116.361731] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 3: start 0x52308
<7> [116.361822] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:385:pipe C] FQ 4: start 0x523c8
<7> [116.361913] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 0: start 0x59008
<7> [116.362008] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 1: start 0x59108
<7> [116.362101] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 2: start 0x59208
<7> [116.362201] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 3: start 0x59308
<7> [116.362304] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:503:pipe D] FQ 4: start 0x593c8
<7> [116.362589] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [116.362732] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [116.362864] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [116.362977] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [116.363114] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:149:pipe A] enable: no [fastset]
<7> [116.363228] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:267:pipe B] enable: no [fastset]
<7> [116.363341] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:385:pipe C] enable: no [fastset]
<7> [116.363455] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:503:pipe D] enable: no [fastset]
<7> [116.363899] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [116.364142] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [116.364368] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:149:pipe A]
<7> [116.364539] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:267:pipe B]
<7> [116.364692] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:385:pipe C]
<7> [116.364852] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:503:pipe D]
<7> [116.365006] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [116.365674] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [116.368690] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:506:DP-1] adding connector to sysfs
<5> [116.369104] Creating 4 MTD partitions on "xe.nvm.768":
<5> [116.369132] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [116.370572] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<7> [116.372935] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:506:DP-1] generating connector hotplug event
<7> [116.373050] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:519:HDMI-A-1] adding connector to sysfs
<7> [116.373632] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:519:HDMI-A-1] generating connector hotplug event
<7> [116.373721] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:525:DP-2] adding connector to sysfs
<7> [116.374486] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<5> [116.375605] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [116.375659] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:525:DP-2] generating connector hotplug event
<7> [116.375732] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:533:HDMI-A-2] adding connector to sysfs
<7> [116.376126] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:533:HDMI-A-2] generating connector hotplug event
<7> [116.376169] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:537:HDMI-A-3] adding connector to sysfs
<7> [116.376492] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:537:HDMI-A-3] generating connector hotplug event
<7> [116.376543] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:541:DP-3] adding connector to sysfs
<7> [116.376973] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [116.377605] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:541:DP-3] generating connector hotplug event
<7> [116.377641] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:549:HDMI-A-4] adding connector to sysfs
<7> [116.377952] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:549:HDMI-A-4] generating connector hotplug event
<5> [116.380834] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<6> [116.385402] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [116.385694] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<5> [116.386103] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [116.387542] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [116.391233] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<6> [116.391750] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [116.391846] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [116.392078] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [116.394806] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [116.395229] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:149:pipe A] not active, skipping
<7> [116.395409] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:267:pipe B] not active, skipping
<7> [116.395570] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:385:pipe C] not active, skipping
<7> [116.395715] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:503:pipe D] not active, skipping
<7> [116.395886] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [116.396308] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [116.399079] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:506:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [116.399227] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [116.403393] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:519:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [116.403574] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [116.407767] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:525:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [116.407896] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [116.412042] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:533:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [116.412146] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [116.416250] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:537:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [116.416356] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [116.420495] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:541:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [116.420625] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [116.424766] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:549:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [116.425020] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [116.425138] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [116.425145] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [116.429286] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [116.429346] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [116.429353] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [116.433590] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [116.433598] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [116.433603] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [116.438035] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected
<7> [116.438047] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [116.438053] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [116.442254] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [116.442262] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [116.442267] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<7> [116.446467] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected
<7> [116.446477] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [116.446482] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [116.450711] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [116.450719] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [116.450734] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<7> [116.454956] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [116.454963] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [116.454972] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no
<7> [116.454976] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no
<7> [116.454979] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no
<7> [116.454983] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no
<7> [116.454986] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no
<7> [116.454989] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [116.454992] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no
<7> [116.455137] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [116.455154] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [116.455217] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [116.455232] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [116.456630] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [116.456602] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [116.456884] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1]
<7> [116.456820] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [116.456893] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:506:DP-1]
<7> [116.457014] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [116.457203] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [116.457390] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [116.457575] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [116.457765] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [116.457948] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [116.458129] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [116.458310] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [116.458491] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [116.458671] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [116.458871] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [116.459052] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [116.459231] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [116.459410] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [116.459589] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [116.459782] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [116.459963] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [116.460141] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [116.460318] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [116.460495] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [116.460737] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [116.461281] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:506:DP-1] disconnected
<7> [116.461291] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1]
<7> [116.461297] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:519:HDMI-A-1]
<7> [116.465494] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:519:HDMI-A-1] disconnected
<7> [116.465499] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2]
<7> [116.465503] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:525:DP-2]
<7> [116.469633] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:525:DP-2] disconnected
<7> [116.469637] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2]
<7> [116.469640] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:533:HDMI-A-2]
<7> [116.470040] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [116.470588] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [116.470755] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [116.470895] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [116.471026] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [116.471140] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [116.471251] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [116.471353] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [116.474042] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:533:HDMI-A-2] disconnected
<7> [116.474048] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3]
<7> [116.474051] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:537:HDMI-A-3]
<6> [116.476512] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [116.476922] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [116.477111] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [116.477146] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [116.477377] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [116.477503] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [116.478183] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:537:HDMI-A-3] disconnected
<7> [116.478187] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3]
<7> [116.478191] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:541:DP-3]
<7> [116.479644] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [116.482739] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:541:DP-3] disconnected
<7> [116.482750] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4]
<7> [116.482757] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:549:HDMI-A-4]
<6> [116.484743] xe 0000:03:00.0: [drm] Pre-production hardware detected.
<7> [116.484783] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [116.486984] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:549:HDMI-A-4] disconnected
<7> [116.486993] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [116.487003] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:506:DP-1] enabled? no
<7> [116.487007] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:519:HDMI-A-1] enabled? no
<7> [116.487011] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:525:DP-2] enabled? no
<7> [116.487015] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:533:HDMI-A-2] enabled? no
<7> [116.487018] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:537:HDMI-A-3] enabled? no
<7> [116.487022] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:541:DP-3] enabled? no
<7> [116.487025] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:549:HDMI-A-4] enabled? no
<7> [116.487153] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [116.487170] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [116.487230] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [116.487241] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [116.487305] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [116.487323] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [116.487319] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [116.487640] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [116.487770] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [116.488009] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [116.488133] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [116.488244] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<3> [116.492770] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [116.495838] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [116.495904] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [116.496094] [IGT] xe_module_load: exiting, ret=0
|