<5>[ 0.000000] Linux version 6.18.0-lgci-xe-xe-4180-f7bb20c7069861306+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Dec 2 16:57:31 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000383] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000384] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004866] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004874] e820: update [mem 0x68ff8000-0x68ff8fff] usable ==> reserved <6>[ 0.004891] Using GB pages for direct mapping <6>[ 0.005512] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005514] printk: early log buf free: 258792(98%) <6>[ 0.005514] Secure boot disabled <6>[ 0.005516] ACPI: Early table checksum verification disabled <6>[ 0.005519] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005521] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005525] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005528] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005530] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005531] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005533] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005534] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005535] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005537] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005538] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005540] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005541] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005542] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005544] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005545] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005546] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005548] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005549] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005550] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005551] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005553] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005554] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005555] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005557] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005558] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005559] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005561] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005562] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005563] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005564] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005566] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005567] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005568] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005570] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005571] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005572] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005573] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005575] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005576] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005577] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005579] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005580] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005581] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005584] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005585] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005587] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005588] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005589] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005590] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005591] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005592] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005592] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005592] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005593] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005593] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005593] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005594] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005594] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005594] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005594] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005595] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005595] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005595] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005596] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005596] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005596] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005596] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005597] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005597] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005597] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005598] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005598] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005598] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005598] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005599] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005599] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005599] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005600] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005600] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005600] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005600] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005601] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005601] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005601] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005602] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005602] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005602] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005603] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005603] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005603] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005603] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005604] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005604] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005604] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005605] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005605] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005681] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005890] No NUMA configuration found <6>[ 0.005891] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005896] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006011] Zone ranges: <6>[ 0.006012] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006013] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006013] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006014] Device empty <6>[ 0.006014] Movable zone start for each node <6>[ 0.006015] Early memory node ranges <6>[ 0.006016] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006016] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006017] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006017] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006019] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006023] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006038] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007622] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035481] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035489] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.035974] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.035980] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036031] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036033] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036035] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036037] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036038] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036049] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036056] TSC deadline timer available <6>[ 0.036057] CPU topo: Max. logical packages: 1 <6>[ 0.036058] CPU topo: Max. logical dies: 1 <6>[ 0.036058] CPU topo: Max. dies per package: 1 <6>[ 0.036060] CPU topo: Max. threads per core: 1 <6>[ 0.036060] CPU topo: Num. cores per package: 8 <6>[ 0.036060] CPU topo: Num. threads per package: 8 <6>[ 0.036061] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036073] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036074] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036075] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.036076] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036077] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036077] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036079] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036080] Booting paravirtualized kernel on bare hardware <6>[ 0.036081] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036089] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036429] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.036434] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036435] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036449] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=nopanic,auto panic=5 softlockup_all_cpu_backtrace=1 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036550] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036567] random: crng init done <6>[ 0.038412] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039312] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039371] software IO TLB: area num 8. <6>[ 0.046709] Fallback order for Node 0: 0 <6>[ 0.046713] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046713] Policy zone: Normal <6>[ 0.046722] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046723] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046726] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047641] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079523] ********************************************************** <4>[ 0.079524] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079524] ** ** <4>[ 0.079524] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079525] ** via the console, logs, and other interfaces. This ** <4>[ 0.079525] ** might reduce the security of your system. ** <4>[ 0.079525] ** ** <4>[ 0.079525] ** If you see this message and you are not debugging ** <4>[ 0.079525] ** the kernel, report this immediately to your system ** <4>[ 0.079526] ** administrator! ** <4>[ 0.079526] ** ** <4>[ 0.079526] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079526] ** ** <4>[ 0.079526] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079526] ********************************************************** <6>[ 0.080639] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.088906] ftrace: allocating 60616 entries in 240 pages <6>[ 0.088907] ftrace: allocated 240 pages with 4 groups <6>[ 0.090328] Dynamic Preempt: voluntary <6>[ 0.090820] Running RCU self tests <6>[ 0.090821] Running RCU synchronous self tests <6>[ 0.090821] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090822] rcu: RCU lockdep checking is enabled. <6>[ 0.090822] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090823] Trampoline variant of Tasks RCU enabled. <6>[ 0.090823] Rude variant of Tasks RCU enabled. <6>[ 0.090823] Tracing variant of Tasks RCU enabled. <6>[ 0.090824] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090824] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090890] Running RCU synchronous self tests <6>[ 0.090895] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090898] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090901] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101199] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.101668] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102085] Console: colour dummy device 80x25 <6>[ 0.102094] printk: legacy console [tty0] enabled <6>[ 0.103223] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103230] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103234] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103237] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103241] ... CLASSHASH_SIZE: 4096 <6>[ 0.103244] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103248] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103252] ... CHAINHASH_SIZE: 262144 <6>[ 0.103256] memory used by lock dependency info: 54145 kB <6>[ 0.103260] memory used for stack traces: 4224 kB <6>[ 0.103264] per task-struct memory footprint: 1920 bytes <6>[ 0.103314] ACPI: Core revision 20250807 <6>[ 0.104176] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104240] APIC: Switch to symmetric I/O mode setup <6>[ 0.104246] DMAR: Host address width 38 <6>[ 0.104250] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104281] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104314] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104334] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104360] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104381] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104415] DMAR: SATC flags: 0x1 <6>[ 0.104423] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104428] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104432] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.106464] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111642] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.111660] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.111736] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.111742] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.111923] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.111928] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.111937] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.111948] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.111955] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.111960] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.111965] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.111973] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.111990] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.111997] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112002] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112007] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112013] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112019] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112025] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112030] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112035] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112040] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112044] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.112654] Freeing SMP alternatives memory: 56K <6>[ 0.112654] pid_max: default: 32768 minimum: 301 <6>[ 0.112654] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.112654] landlock: Up and running. <6>[ 0.112654] Yama: becoming mindful. <6>[ 0.112654] AppArmor: AppArmor initialized <6>[ 0.112654] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112654] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112654] Running RCU synchronous self tests <6>[ 0.112654] Running RCU synchronous self tests <6>[ 0.112654] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.112654] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.112654] core: cpu_core PMU driver: <6>[ 0.112654] ... version: 6 <6>[ 0.112654] ... bit width: 48 <6>[ 0.112654] ... generic counters: 10 <6>[ 0.112654] ... generic bitmap: 00000000000003ff <6>[ 0.112654] ... fixed-purpose counters: 4 <6>[ 0.112654] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.112654] ... value mask: 0000ffffffffffff <6>[ 0.112654] ... max period: 00007fffffffffff <6>[ 0.112654] ... global_ctrl mask: 0001000f000003ff <6>[ 0.112715] signal: max sigframe size: 3632 <6>[ 0.112741] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.112841] rcu: Hierarchical SRCU implementation. <6>[ 0.112845] rcu: Max phase no-delay instances is 400. <6>[ 0.112990] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.114928] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115209] smp: Bringing up secondary CPUs ... <6>[ 0.115567] smpboot: x86: Booting SMP configuration: <6>[ 0.115574] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010798] core: cpu_atom PMU driver: <6>[ 0.010798] ... version: 6 <6>[ 0.010798] ... bit width: 48 <6>[ 0.010798] ... generic counters: 8 <6>[ 0.010798] ... generic bitmap: 00000000000000ff <6>[ 0.010798] ... fixed-purpose counters: 6 <6>[ 0.010798] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010798] ... value mask: 0000ffffffffffff <6>[ 0.010798] ... max period: 00007fffffffffff <6>[ 0.010798] ... global_ctrl mask: 00000077000000ff <6>[ 0.120766] smp: Brought up 1 node, 8 CPUs <6>[ 0.120766] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.122795] Memory: 32358164K/33158528K available (25429K kernel code, 5652K rwdata, 9544K rodata, 5704K init, 68232K bss, 777188K reserved, 0K cma-reserved) <6>[ 0.123820] devtmpfs: initialized <6>[ 0.123969] x86/mm: Memory block size: 128MB <6>[ 0.144921] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.145717] Running RCU synchronous self tests <6>[ 0.145729] Running RCU synchronous self tests <6>[ 0.146686] Running RCU Tasks wait API self tests <6>[ 0.146749] Running RCU Tasks Rude wait API self tests <6>[ 0.146749] Running RCU Tasks Trace wait API self tests <6>[ 0.159718] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.160147] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.161213] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.161837] pinctrl core: initialized pinctrl subsystem <6>[ 0.162516] PM: RTC time: 21:57:48, date: 2025-12-02 <6>[ 0.163291] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.164275] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.164579] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.164862] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.164919] audit: initializing netlink subsys (disabled) <5>[ 0.164961] audit: type=2000 audit(1764712668.053:1): state=initialized audit_enabled=0 res=1 <6>[ 0.166043] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.166044] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.166051] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.166056] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.166060] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.166131] cpuidle: using governor ladder <6>[ 0.166131] cpuidle: using governor menu <6>[ 0.166131] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.167072] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.167101] PCI: Using configuration type 1 for base access <6>[ 0.167225] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.168895] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.168895] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.168895] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.168895] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.173160] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.173167] raid6: using avx2x2 recovery algorithm <6>[ 0.173725] fbcon: Taking over console <6>[ 0.173873] ACPI: Added _OSI(Module Device) <6>[ 0.173878] ACPI: Added _OSI(Processor Device) <6>[ 0.173883] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.178701] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.606754] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.642518] ACPI: EC: EC started <6>[ 0.642539] ACPI: EC: interrupt blocked <6>[ 0.649074] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.649088] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.663710] Callback from call_rcu_tasks() invoked. <6>[ 0.934719] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 0.934730] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 0.963358] ACPI: Interpreter enabled <6>[ 0.963452] ACPI: PM: (supports S0 S4 S5) <6>[ 0.963456] ACPI: Using IOAPIC for interrupt routing <6>[ 0.968659] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 0.968666] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.014703] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.014704] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.066313] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.066616] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.070099] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.279050] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.292243] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.452279] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.453947] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.462354] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.471848] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.472112] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.472367] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 1.732239] ACPI: \_TZ_.FN00: New power resource <6>[ 1.733183] ACPI: \_TZ_.FN01: New power resource <6>[ 1.734042] ACPI: \_TZ_.FN02: New power resource <6>[ 1.734904] ACPI: \_TZ_.FN03: New power resource <6>[ 1.735770] ACPI: \_TZ_.FN04: New power resource <6>[ 1.738333] ACPI: \PIN_: New power resource <6>[ 1.744287] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 1.744315] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 1.750511] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 1.765321] PCI host bridge to bus 0000:00 <6>[ 1.765381] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 1.765395] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 1.765407] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 1.765420] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 1.765433] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 1.765450] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 1.770573] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 1.771602] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 1.771698] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 1.771711] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 1.771725] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 1.771780] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 1.774089] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 1.774122] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 1.776116] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 1.776150] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 1.776161] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 1.777561] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 1.777602] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 1.777617] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 1.777637] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 1.777800] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 1.777895] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 1.785030] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 1.785076] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 1.785090] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 1.785110] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 1.785229] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 1.785313] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 1.792281] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 1.792325] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 1.792339] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 1.792359] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 1.792478] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 1.792563] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 1.798634] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 1.798654] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 1.798654] pci 0000:00:0a.0: enabling Extended Tags <6>[ 1.798654] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 1.798654] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 1.798654] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 1.799777] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 1.799832] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 1.799910] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 1.802962] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 1.803017] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 1.803029] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 1.803097] pci 0000:00:0d.2: supports D1 D2 <6>[ 1.803104] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 1.805453] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 1.805507] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 1.805519] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 1.805586] pci 0000:00:0d.3: supports D1 D2 <6>[ 1.805593] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 1.807670] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 1.807730] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 1.807810] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 1.812047] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 1.812138] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 1.812243] pci 0000:00:13.0: PME# supported from D3hot <6>[ 1.813189] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 1.813245] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 1.813321] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 1.816472] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 1.816545] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 1.816559] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 1.817051] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 1.817174] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 1.830660] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 1.830780] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 1.849630] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 1.849737] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 1.863723] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 1.863825] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 1.877743] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 1.877864] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 1.878004] pci 0000:00:16.0: PME# supported from D3hot <6>[ 1.884244] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 1.884289] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 1.884304] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 1.884319] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 1.884480] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 1.884586] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 1.892305] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 1.892407] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 1.892454] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 1.892962] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 1.893190] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 1.901217] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 1.903763] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 1.903885] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 1.903905] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 1.904033] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 1.905227] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 1.905299] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 1.905316] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 1.907261] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 1.907382] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 1.908009] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 1.908267] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 1.908508] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 1.908785] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 1.908858] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 1.908872] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 1.908884] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 1.909075] pci 0000:7f:00.0: supports D1 D2 <6>[ 1.909082] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 1.909588] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 1.911764] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 1.912288] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 1.912340] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 1.914443] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 1.914523] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.379496] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 12.241948] Low-power S0 idle used by default for system suspend <6>[ 12.294918] ACPI: EC: interrupt unblocked <6>[ 12.294929] ACPI: EC: event unblocked <6>[ 12.294965] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 12.294971] ACPI: EC: GPE=0x6e <6>[ 12.294977] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 12.294985] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 12.295737] iommu: Default domain type: Translated <6>[ 12.295804] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 12.299711] SCSI subsystem initialized <7>[ 12.300808] libata version 3.00 loaded. <6>[ 12.300808] ACPI: bus type USB registered <6>[ 12.300997] usbcore: registered new interface driver usbfs <6>[ 12.301117] usbcore: registered new interface driver hub <6>[ 12.301225] usbcore: registered new device driver usb <6>[ 12.301552] pps_core: LinuxPPS API ver. 1 registered <6>[ 12.301562] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 12.301611] PTP clock support registered <6>[ 12.302764] EDAC MC: Ver: 3.0.0 <6>[ 12.304698] efivars: Registered efivars operations <6>[ 12.307935] NetLabel: Initializing <6>[ 12.307945] NetLabel: domain hash size = 128 <6>[ 12.307954] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 12.308119] NetLabel: unlabeled traffic allowed by default <6>[ 12.308159] mctp: management component transport protocol core <6>[ 12.308171] NET: Registered PF_MCTP protocol family <6>[ 12.308282] PCI: Using ACPI for IRQ routing <7>[ 12.350313] PCI: pci_cache_line_size set to 64 bytes <6>[ 12.350603] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 12.350754] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 12.350774] e820: reserve RAM buffer [mem 0x68ff8000-0x6bffffff] <7>[ 12.350781] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 12.350788] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 12.350795] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 12.351720] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 12.351746] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 12.351759] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 12.351791] vgaarb: loaded <7>[ 12.355696] Monitor-Mwait will be used to enter C-1 state <7>[ 12.355805] Monitor-Mwait will be used to enter C-2 state <7>[ 12.355805] Monitor-Mwait will be used to enter C-3 state <6>[ 12.364780] clocksource: Switched to clocksource tsc-early <5>[ 12.375792] VFS: Disk quotas dquot_6.6.0 <6>[ 12.375858] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 12.378633] AppArmor: AppArmor Filesystem Enabled <6>[ 12.379104] pnp: PnP ACPI init <6>[ 12.381219] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 12.381247] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 12.384797] system 00:02: [io 0x06a4] has been reserved <6>[ 12.384826] system 00:02: [io 0x06a0] has been reserved <6>[ 12.432627] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 12.432651] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 12.432676] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 12.432695] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 12.432714] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 12.432737] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 12.432761] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 12.432780] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 12.439148] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 12.443446] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 12.443725] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 12.452735] pnp: PnP ACPI: found 8 devices <6>[ 12.470016] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 12.470388] NET: Registered PF_INET protocol family <6>[ 12.470686] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 12.473976] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 12.474294] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 12.474553] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 12.475869] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 12.477951] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 12.478604] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 12.480220] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 12.481870] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 12.481974] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 12.481992] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 12.482006] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 12.482078] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 12.482088] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 12.482097] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 12.482108] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 12.482140] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 12.482165] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 12.482191] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 12.482216] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 12.482263] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 12.482278] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 12.482290] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 12.482301] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 12.482317] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 12.482333] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 12.482345] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 12.482356] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 12.482372] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 12.482380] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 12.482392] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 12.482403] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 12.482419] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 12.482427] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 12.482438] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 12.482453] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 12.482489] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 12.482536] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 12.482545] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 12.482553] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 12.482562] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 12.482570] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 12.482580] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 12.482588] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 12.482596] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 12.482606] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 12.482613] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 12.482621] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 12.482631] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 12.482638] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 12.482647] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 12.482657] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 12.482664] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 12.482672] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 12.484083] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 12.486262] PCI: CLS 0 bytes, default 64 <6>[ 12.486406] DMAR: No RMRR found <6>[ 12.486421] DMAR: No ATSR found <6>[ 12.486427] DMAR: dmar1: Using Queued invalidation <6>[ 12.486437] DMAR: dmar0: Using Queued invalidation <6>[ 12.486445] DMAR: dmar2: Using Queued invalidation <6>[ 12.487691] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 12.487831] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 12.487929] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 12.488015] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 12.492722] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 12.494774] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 12.494874] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 12.494970] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 12.495057] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 12.495178] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 12.495239] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 12.495300] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 12.495390] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 12.495490] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 12.495592] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 12.495652] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 12.495774] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 12.495842] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 12.495904] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 12.495973] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 12.496066] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 12.496155] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 12.496265] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 12.496386] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 12.496453] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 12.496516] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 12.496578] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 12.496666] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 12.496780] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 12.509361] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 12.509381] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 12.509389] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 12.514561] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 12.514807] clocksource: Switched to clocksource tsc <6>[ 12.515014] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 12.524135] Initialise system trusted keyrings <5>[ 12.524230] Key type blacklist registered <6>[ 12.524745] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 12.536782] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 12.536923] ntfs3: Enabled Linux POSIX ACLs support <6>[ 12.536930] ntfs3: Read-only LZX/Xpress compression included <5>[ 12.537619] integrity: Platform Keyring initialized <5>[ 12.537644] integrity: Machine keyring initialized <6>[ 12.544678] xor: automatically using best checksumming function avx <5>[ 12.544690] Key type asymmetric registered <5>[ 12.544706] Asymmetric key parser 'x509' registered <6>[ 12.544853] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 12.545656] io scheduler mq-deadline registered <6>[ 12.547360] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 12.549119] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 12.549538] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 12.550818] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 12.551141] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 12.552384] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 12.552691] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 12.553841] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 12.554169] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 12.555723] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 12.556104] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 12.558166] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 12.558407] ACPI: button: Lid Switch [LID0] <6>[ 12.558704] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 12.558922] ACPI: button: Sleep Button [SLPB] <6>[ 12.559176] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 12.559659] ACPI: button: Power Button [PWRB] <6>[ 12.731943] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 12.731963] ACPI: thermal: Thermal Zone [TZ00] (66 C) <6>[ 12.733430] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 12.733790] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 12.734883] ACPI: battery: Slot [BAT0] (battery present) <6>[ 12.757381] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 12.773810] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 12.777092] hpet_acpi_add: no address or irqs in _CRS <6>[ 12.777345] Linux agpgart interface v0.103 <6>[ 12.778260] ACPI: bus type drm_connector registered <7>[ 12.779290] initcall simpledrm_platform_driver_init blacklisted <6>[ 12.801706] loop: module loaded <6>[ 12.850579] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 13.059295] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 13.183708] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 13.340584] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 13.454679] Key type psk registered <6>[ 13.458853] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 13.459501] nvme nvme0: pci function 0000:80:00.0 <6>[ 13.460082] tun: Universal TUN/TAP device driver, 1.6 <6>[ 13.460995] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 13.461117] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 13.462975] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 13.465889] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 13.465922] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 13.465948] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 13.466425] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 13.466451] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.466461] usb usb1: Product: xHCI Host Controller <6>[ 13.466469] usb usb1: Manufacturer: Linux 6.18.0-lgci-xe-xe-4180-f7bb20c7069861306+ xhci-hcd <6>[ 13.466481] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 13.467615] hub 1-0:1.0: USB hub found <6>[ 13.467696] hub 1-0:1.0: 1 port detected <6>[ 13.471393] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 13.471409] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.471419] usb usb2: Product: xHCI Host Controller <6>[ 13.471427] usb usb2: Manufacturer: Linux 6.18.0-lgci-xe-xe-4180-f7bb20c7069861306+ xhci-hcd <6>[ 13.471438] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 13.472232] hub 2-0:1.0: USB hub found <6>[ 13.472280] hub 2-0:1.0: 3 ports detected <6>[ 13.494881] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 13.497284] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 13.497323] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 13.499124] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 13.501080] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 13.501106] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 13.501130] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 13.501433] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 13.501447] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.501458] usb usb3: Product: xHCI Host Controller <6>[ 13.501465] usb usb3: Manufacturer: Linux 6.18.0-lgci-xe-xe-4180-f7bb20c7069861306+ xhci-hcd <6>[ 13.501477] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 13.502372] hub 3-0:1.0: USB hub found <6>[ 13.502435] hub 3-0:1.0: 8 ports detected <6>[ 13.503519] nvme0n1: p1 p2 <6>[ 13.530846] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 13.530867] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.530877] usb usb4: Product: xHCI Host Controller <6>[ 13.530885] usb usb4: Manufacturer: Linux 6.18.0-lgci-xe-xe-4180-f7bb20c7069861306+ xhci-hcd <6>[ 13.530897] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 13.531677] hub 4-0:1.0: USB hub found <6>[ 13.531723] hub 4-0:1.0: 2 ports detected <6>[ 13.539412] usbcore: registered new interface driver usb-storage <6>[ 13.539595] usbcore: registered new interface driver usbserial_generic <6>[ 13.539682] usbserial: USB Serial support registered for generic <6>[ 13.539762] usbcore: registered new interface driver ftdi_sio <6>[ 13.539848] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 13.540269] usbcore: registered new interface driver pl2303 <6>[ 13.540307] usbserial: USB Serial support registered for pl2303 <6>[ 13.540443] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 13.540453] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 14.252242] i8042: Can't read CTR while initializing i8042 <3>[ 14.252255] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 14.253996] mousedev: PS/2 mouse device common for all mice <6>[ 14.254832] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 14.256626] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 14.256843] rtc_cmos rtc_cmos: setting system clock to 2025-12-02T21:58:03 UTC (1764712683) <6>[ 14.256959] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 14.256996] i2c_dev: i2c /dev entries driver <6>[ 14.266750] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 14.266759] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 14.266766] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 14.266793] device-mapper: uevent: version 1.0.3 <6>[ 14.267126] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 14.267142] intel_pstate: Intel P-state driver initializing <6>[ 14.270345] Hybrid CPU capacity scaling enabled <6>[ 14.270676] processor cpu0: EM: created perf domain <6>[ 14.270946] processor cpu1: EM: created perf domain <6>[ 14.271205] processor cpu2: EM: created perf domain <6>[ 14.271444] processor cpu3: EM: created perf domain <6>[ 14.271687] processor cpu4: EM: created perf domain <6>[ 14.271967] processor cpu5: EM: created perf domain <6>[ 14.272216] processor cpu6: EM: created perf domain <6>[ 14.272468] processor cpu7: EM: created perf domain <6>[ 14.273963] intel_pstate: HWP enabled <6>[ 14.273971] sdhci: Secure Digital Host Controller Interface driver <6>[ 14.273979] sdhci: Copyright(c) Pierre Ossman <6>[ 14.274168] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 14.276899] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 14.277620] drop_monitor: Initializing network drop monitor service <6>[ 14.277796] NET: Registered PF_INET6 protocol family <6>[ 14.278946] Segment Routing with IPv6 <6>[ 14.278982] In-situ OAM (IOAM) with IPv6 <6>[ 14.279027] NET: Registered PF_PACKET protocol family <5>[ 14.279309] Key type dns_resolver registered <4>[ 14.283544] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 14.284499] microcode: Current revision: 0x00000124 <6>[ 14.285181] IPI shorthand broadcast: enabled <6>[ 14.298164] sched_clock: Marking stable (14288003342, 9798776)->(14381055696, -83253578) <6>[ 14.298928] registered taskstats version 1 <5>[ 14.300483] Loading compiled-in X.509 certificates <6>[ 14.344852] Demotion targets for Node 0: null <6>[ 14.345163] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 14.345167] kmemleak: Automatic memory scanning thread started <5>[ 14.345389] Key type .fscrypt registered <5>[ 14.345394] Key type fscrypt-provisioning registered <6>[ 14.348291] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 14.350761] Key type encrypted registered <6>[ 14.350767] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 14.350966] ima: No TPM chip found, activating TPM-bypass! <5>[ 14.350979] Loading compiled-in module X.509 certificates <5>[ 14.351714] Loaded X.509 cert 'Build time autogenerated kernel key: 6ffc15e73068e97820ae5fc131bf7746955101b8' <6>[ 14.351724] ima: Allocated hash algorithm: sha256 <6>[ 14.351764] ima: No architecture policies found <6>[ 14.351846] evm: Initialising EVM extended attributes: <6>[ 14.351850] evm: security.selinux <6>[ 14.351854] evm: security.SMACK64 <6>[ 14.351856] evm: security.SMACK64EXEC <6>[ 14.351859] evm: security.SMACK64TRANSMUTE <6>[ 14.351863] evm: security.SMACK64MMAP <6>[ 14.351865] evm: security.apparmor <6>[ 14.351868] evm: security.ima <6>[ 14.351871] evm: security.capability <6>[ 14.351874] evm: HMAC attrs: 0x1 <6>[ 14.353838] PM: Magic number: 5:857:1004 <6>[ 14.353869] input input1: hash matches <6>[ 14.353901] system 00:06: hash matches <6>[ 14.353987] memory memory43: hash matches <6>[ 14.354035] netconsole: network logging started <6>[ 14.354680] RAS: Correctable Errors collector initialized. <6>[ 14.354817] clk: Disabling unused clocks <6>[ 14.354827] PM: genpd: Disabling unused power domains <4>[ 14.355330] check access for rdinit=/init failed: -2, ignoring <6>[ 14.355337] md: Waiting for all devices to be available before autodetect <6>[ 14.355355] md: If you don't use raid, use raid=noautodetect <6>[ 14.355360] md: Autodetecting RAID arrays. <6>[ 14.355370] md: autorun ... <6>[ 14.355373] md: ... autorun DONE. <6>[ 14.397523] EXT4-fs (nvme0n1p2): mounted filesystem ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 ro with ordered data mode. Quota mode: none. <6>[ 14.397586] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 14.398091] devtmpfs: mounted <6>[ 14.413741] Freeing unused decrypted memory: 2036K <6>[ 14.414675] Freeing unused kernel image (initmem) memory: 5704K <6>[ 14.414699] Write protecting the kernel read-only data: 36864k <6>[ 14.415404] Freeing unused kernel image (text/rodata gap) memory: 1192K <6>[ 14.415725] Freeing unused kernel image (rodata/data gap) memory: 696K <6>[ 14.420277] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 14.428887] Run /sbin/init as init process <7>[ 14.428894] with arguments: <7>[ 14.428895] /sbin/init <7>[ 14.428896] with environment: <7>[ 14.428897] HOME=/ <7>[ 14.428897] TERM=linux <7>[ 14.489667] systemd[1]: Inserted module 'autofs4' <7>[ 14.511305] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 14.511341] systemd[1]: Detected architecture x86-64. <7>[ 14.512372] systemd[1]: Hostname set to . <7>[ 14.737495] systemd[1]: Queued start job for default target graphical.target. <7>[ 14.757360] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 14.759665] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 14.761919] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 14.762340] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 14.763669] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 14.763895] systemd[1]: Expecting device dev-disk-by\x2duuid-47B0\x2dB6FF.device - /dev/disk/by-uuid/47B0-B6FF... <7>[ 14.764039] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 14.764174] systemd[1]: Reached target slices.target - Slice Units. <7>[ 14.764287] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 14.764394] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 14.764506] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 14.764887] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 14.765704] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 14.766172] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 14.766618] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 14.766979] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 14.767262] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 14.767718] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 14.768157] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 14.768481] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 14.768690] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 14.769009] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 14.769279] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 14.772707] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 14.775491] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 14.778303] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 14.781173] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 14.788025] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 14.791483] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 14.795303] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 14.798440] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 14.801482] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 14.805741] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 14.815023] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 14.820552] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 14.826013] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 14.827007] systemd-journald[208]: Collecting audit messages is disabled. <7>[ 14.831378] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 14.837233] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 14.837441] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 14.840468] pstore: Using crash dump compression: deflate <7>[ 14.842780] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 14.846073] pstore: Registered efi_pstore as persistent store backend <7>[ 14.849225] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 14.849323] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 14.849391] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 14.852369] fuse: init (API version 7.45) <7>[ 14.853774] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 14.859408] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 14.988129] EXT4-fs (nvme0n1p2): re-mounted ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 r/w. <6>[ 15.016146] Adding 8388604k swap on /swap.img. Priority:-2 extents:52 across:429129728k SS <7>[ 15.030143] systemd-journald[208]: Received client request to flush runtime journal. <7>[ 15.046604] systemd-journald[208]: /var/log/journal/834d840f209d4e2294628ae19454e8da/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 15.046622] systemd-journald[208]: Rotating system journal. <4>[ 15.778400] nvme nvme0: using unchecked data buffer <6>[ 15.912169] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 15.942140] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <4>[ 15.956530] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring <6>[ 15.971723] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 15.974292] intel-hid INTC107B:00: platform supports 5 button array <6>[ 15.978625] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <3>[ 16.088037] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 16.088373] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <5>[ 16.112085] audit: type=1400 audit(1764712685.353:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=420 comm="apparmor_parser" <5>[ 16.112721] audit: type=1400 audit(1764712685.353:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=419 comm="apparmor_parser" <5>[ 16.113283] audit: type=1400 audit(1764712685.354:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=421 comm="apparmor_parser" <5>[ 16.113663] audit: type=1400 audit(1764712685.354:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=418 comm="apparmor_parser" <5>[ 16.113953] audit: type=1400 audit(1764712685.355:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=422 comm="apparmor_parser" <5>[ 16.115657] audit: type=1400 audit(1764712685.356:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=423 comm="apparmor_parser" <5>[ 16.118913] audit: type=1400 audit(1764712685.360:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=424 comm="apparmor_parser" <5>[ 16.121137] audit: type=1400 audit(1764712685.362:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=426 comm="apparmor_parser" <5>[ 16.123584] audit: type=1400 audit(1764712685.364:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=427 comm="apparmor_parser" <5>[ 16.125513] audit: type=1400 audit(1764712685.366:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=428 comm="apparmor_parser" <6>[ 16.351186] pci 0000:00:05.0: Setting to D3hot <6>[ 16.363848] pci 0000:00:0b.0: Setting to D3hot <6>[ 16.379686] intel_pmc_core INT33A1:00: initialized <6>[ 16.528286] ACPI: bus type thunderbolt registered <6>[ 16.565690] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 16.587473] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 16.587483] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 16.599566] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 16.617862] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 16.647880] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 16.665826] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 16.668538] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 16.701068] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 16.784048] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer <6>[ 16.784052] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 16.784054] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 16.784055] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 16.784055] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 16.784056] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 16.799567] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 16.815997] intel_rapl_common: Found RAPL domain package <6>[ 16.816003] intel_rapl_common: Found RAPL domain dram <6>[ 16.824168] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 16.824817] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 16.832363] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 9c:a2:f4:61:fe:e9, XID 541, IRQ 175 <6>[ 16.832374] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 16.834096] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 16.879482] block nvme0n1: No UUID available providing old NGUID <6>[ 17.016576] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.114669] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 17.121763] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 17.123114] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.336491] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.337518] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 17.363663] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 17.363672] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 17.363674] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 17.454501] loop0: detected capacity change from 0 to 8 <6>[ 17.512664] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.545621] intel_rapl_common: Found RAPL domain package <6>[ 17.545627] intel_rapl_common: Found RAPL domain core <6>[ 17.545629] intel_rapl_common: Found RAPL domain uncore <6>[ 17.545630] intel_rapl_common: Found RAPL domain dram <6>[ 17.545632] intel_rapl_common: Found RAPL domain psys <6>[ 17.671520] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.735989] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.760975] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <4>[ 17.800125] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 17.857085] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 17.857120] 0x000000000000-0x000002000000 : "BIOS" <6>[ 17.877455] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.919053] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 18.016788] Consider using thermal netlink events interface <6>[ 18.076189] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 18.114868] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.360229] hid: raw HID events driver (C) Jiri Kosina <6>[ 18.367052] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 18.401682] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.403462] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.405807] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.405926] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.407497] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.408464] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.409325] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.409748] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.411861] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.413043] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.414118] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.414436] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.417141] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.420684] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.424211] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.425426] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.428916] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.430577] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.434002] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.434270] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.436794] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.437981] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.440300] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.440838] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.443558] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.515808] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.519824] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.524878] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.529445] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.534254] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.538368] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.543616] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.548365] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.553108] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.557625] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.561131] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.565890] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.570148] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.575303] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.579943] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.584623] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.589719] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.593468] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.599717] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.604205] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.868086] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 19.868130] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 19.868172] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 20.885330] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 20.885374] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 20.885411] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 21.096703] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 28.756686] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 28.761197] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 37.346256] systemd-journald[208]: /var/log/journal/834d840f209d4e2294628ae19454e8da/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 52.024694] [IGT] xe_module_load: executing <4>[ 52.024769] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.038517] [IGT] xe_module_load: starting subtest load <5>[ 52.296265] Setting dangerous option force_probe - tainting kernel <6>[ 52.299467] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 52.301027] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 52.301037] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 52.301143] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 52.301242] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 52.303139] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 52.303278] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 52.303394] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 52.303507] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 52.303621] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 52.303720] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 52.303813] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 52.303905] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 52.303996] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 52.304105] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 52.304196] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 52.304298] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 52.304400] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 52.304501] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 52.304606] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 52.304718] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 52.304836] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 52.304955] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 52.305066] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 52.305173] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 52.305276] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.305378] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.305476] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 52.305572] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.305668] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.305761] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.305870] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 52.305983] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.306098] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.306193] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.306279] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 52.306367] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.306454] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.306539] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.306625] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 52.306709] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.306794] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.306898] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.306989] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 52.307080] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.307164] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.307245] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.307334] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 52.307703] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 52.307819] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 52.307947] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 52.308070] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 52.308173] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 52.308264] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 52.308355] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 52.308443] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 52.308526] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 52.308619] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 52.308713] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 52.308847] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 52.308969] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 52.309088] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 52.309191] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 52.309270] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 52.309351] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 52.309433] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 52.309524] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.309610] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.309705] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.309799] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 52.309920] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 52.310026] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.310128] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.310206] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.310287] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 52.310399] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.310549] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 52.310691] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.310834] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 52.311039] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 52.311185] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 52.311295] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.311404] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.311539] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 52.311645] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 52.311664] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 52.311781] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 52.311914] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 52.312046] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 52.312298] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 52.312698] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 52.313924] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 52.314372] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 52.314475] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 52.314583] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 52.314676] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 52.314768] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 52.314878] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 52.314978] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 52.315073] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 52.315161] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 52.315244] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 52.315326] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 52.315405] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 52.315484] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 52.315739] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 52.315865] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 52.315979] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 52.316092] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 52.316195] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 52.316302] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 52.316418] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 52.316527] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 52.316634] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.316736] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 52.316846] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.316964] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 52.317089] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.317212] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 52.317320] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 52.317418] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 52.317521] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.317618] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 52.317722] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.317883] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 52.318004] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.318116] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 52.318232] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 52.318338] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 52.318447] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.318557] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 52.318667] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.318774] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 52.318896] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.319005] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 52.321292] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 52.324105] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.324261] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 52.324384] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 52.324555] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:210:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 52.324726] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:210:DDI A/PHY A] <7>[ 52.324952] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 52.325092] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 52.325230] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 52.325373] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 52.325507] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 52.325641] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 52.325775] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 52.325921] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 52.326054] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 52.326211] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:210:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 52.326464] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.326596] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.326722] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.326850] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.326970] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.327243] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.327544] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.328873] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.329194] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <6>[ 52.330149] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 52.367839] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 52.379840] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 52.403828] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 52.427825] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 52.439826] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 52.499843] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 52.847855] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 52.847865] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.847867] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.847869] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 52.847871] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 52.847873] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.847875] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 52.847879] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.847881] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 52.847883] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.847920] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.847921] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 52.847922] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 52.847934] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:211:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.848057] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:211:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.859826] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:211:eDP-1] Performing OUI wait (0 ms) <7>[ 52.871829] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:211:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 52.871974] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:211:eDP-1] DRRS type: seamless <7>[ 52.872115] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:211:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 52.872231] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:211:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 52.872377] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.872474] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.872569] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.872663] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.872757] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.872892] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.873099] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:219:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 52.873282] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.873422] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:219:DDI TC1/PHY TC1] <7>[ 52.873780] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:231:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 52.873928] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.874052] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:231:DDI TC2/PHY TC2] <7>[ 52.874301] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:239:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 52.874430] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.874549] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:239:DDI TC3/PHY TC3] <7>[ 52.874996] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:89:pipe A] hw state readout: enabled <7>[ 52.875132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe B] hw state readout: disabled <7>[ 52.875255] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:207:pipe C] hw state readout: disabled <7>[ 52.875353] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 52.875449] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 52.875545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 52.875641] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 52.875737] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 52.875842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 52.875947] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:92:plane 1B] hw state readout: disabled, pipe B <7>[ 52.876054] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 2B] hw state readout: disabled, pipe B <7>[ 52.876153] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 3B] hw state readout: disabled, pipe B <7>[ 52.876251] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:122:plane 4B] hw state readout: disabled, pipe B <7>[ 52.876351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:132:plane 5B] hw state readout: disabled, pipe B <7>[ 52.876449] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:142:cursor B] hw state readout: disabled, pipe B <7>[ 52.876545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1C] hw state readout: disabled, pipe C <7>[ 52.876632] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:161:plane 2C] hw state readout: disabled, pipe C <7>[ 52.876720] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:171:plane 3C] hw state readout: disabled, pipe C <7>[ 52.876809] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 4C] hw state readout: disabled, pipe C <7>[ 52.876899] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:191:plane 5C] hw state readout: disabled, pipe C <7>[ 52.876991] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:201:cursor C] hw state readout: disabled, pipe C <7>[ 52.877912] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 52.878039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:210:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 52.878135] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.878225] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 52.878307] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.878387] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:222:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.878466] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:223:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.878550] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.878638] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:231:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 52.878724] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.878818] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:234:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.878907] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.879011] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.879106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:239:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 52.879189] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:241:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.879270] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:242:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.879349] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:243:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.880195] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 52.880296] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 52.880394] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.880491] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 52.880592] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.880694] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.880795] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.880915] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 52.881051] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:211:eDP-1] hw state readout: enabled <7>[ 52.881165] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:220:DP-1] hw state readout: disabled <7>[ 52.881266] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:232:DP-2] hw state readout: disabled <7>[ 52.881362] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:240:DP-3] hw state readout: disabled <7>[ 52.881517] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 52.881611] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 52.881703] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 52.881791] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 52.881889] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 52.881975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 52.882062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:89:pipe A] min_cdclk 173855 kHz <7>[ 52.882143] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:92:plane 1B] min_cdclk 0 kHz <7>[ 52.882221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 2B] min_cdclk 0 kHz <7>[ 52.882298] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 3B] min_cdclk 0 kHz <7>[ 52.882375] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:122:plane 4B] min_cdclk 0 kHz <7>[ 52.882451] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:132:plane 5B] min_cdclk 0 kHz <7>[ 52.882528] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:142:cursor B] min_cdclk 0 kHz <7>[ 52.882604] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe B] min_cdclk 0 kHz <7>[ 52.882681] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1C] min_cdclk 0 kHz <7>[ 52.882757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:161:plane 2C] min_cdclk 0 kHz <7>[ 52.882847] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:171:plane 3C] min_cdclk 0 kHz <7>[ 52.882936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 4C] min_cdclk 0 kHz <7>[ 52.883025] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:191:plane 5C] min_cdclk 0 kHz <7>[ 52.883122] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:201:cursor C] min_cdclk 0 kHz <7>[ 52.883206] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:207:pipe C] min_cdclk 0 kHz <7>[ 52.883436] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:89:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 52.883525] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.883609] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:207:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.883691] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 52.883796] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 52.883922] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 52.884068] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 52.884178] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 52.884413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [setup_hw_state] <7>[ 52.884515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 52.884614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 52.884713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 52.884815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 52.884919] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 52.885040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 52.885152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 52.885250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 52.885351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 52.885467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 52.885587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 52.885701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 52.885799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 52.885934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 52.886050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 52.886157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 52.886257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 52.886356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.886451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.886544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.886641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.886737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.886851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 52.886974] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 52.887091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 52.887191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 52.887288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 52.887383] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 52.887475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 270000, fracen: yes, <7>[ 52.887558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 52.887643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 52.887726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 52.887815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 52.887923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 52.888030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 52.888139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 52.888246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 52.888333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 52.888414] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 52.888494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 52.888580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.888668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.888754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.888860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.888974] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.889088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.889184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.889275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.889365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.889451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.889541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 52.889625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe B] enable: no [setup_hw_state] <7>[ 52.889707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:207:pipe C] enable: no [setup_hw_state] <7>[ 52.889794] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 52.890165] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:89:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 52.890268] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:89:pipe A] <6>[ 52.903884] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 52.907542] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 52.907646] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 52.907722] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 52.907793] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 52.907881] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 52.907948] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 52.908017] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 52.908080] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 52.908141] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 52.908201] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 52.908261] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 52.908320] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 52.908379] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 52.908437] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 52.908495] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 52.908601] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 52.918918] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 52.919666] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 52.919890] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000000ef <7>[ 52.919976] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000000ef <7>[ 52.920055] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 52.920132] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 52.920198] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.560776] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.560780] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.560781] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.560950] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.561075] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.561189] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.561293] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.561423] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.561542] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.561670] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.561750] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.561839] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.561924] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.562934] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.563033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.563138] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.563226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.563310] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.563394] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.563477] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.563557] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.563637] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.563716] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.563795] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.563893] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.563980] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.564065] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.564145] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.564223] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.564297] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.564371] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.564445] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.564518] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.564589] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.564659] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.564729] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.564798] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.564883] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.564957] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.565035] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.565112] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.565191] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.565269] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 53.565345] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 53.565419] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 53.565493] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.565568] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.565643] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.565718] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.565789] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.565877] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.565954] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.566030] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.566331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.566410] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.566483] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.566554] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.566838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.566907] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.566975] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.567042] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.567335] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.567401] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.567466] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.567529] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.567595] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.567658] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.567727] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.568159] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.568283] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 53.568362] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.568443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.568524] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.568599] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 53.568667] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.568731] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.568795] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.568877] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.568943] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.569009] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.569075] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.569140] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.569203] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.569293] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.569441] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.570667] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.573389] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.588650] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 53.599519] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.599849] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.600724] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 53.600858] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 53.600935] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 53.601005] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 53.601075] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 53.601141] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 53.601206] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 53.601271] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 53.601337] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 53.604061] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.604164] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.604241] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.607392] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.607497] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.611602] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 53.615737] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 53.615859] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.615945] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 53.616016] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.616082] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 53.616145] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.616206] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.616267] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.616327] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.616386] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.616444] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.616502] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.616558] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.616617] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 53.617861] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.620032] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.621028] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.621123] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.621232] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 53.642088] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.642548] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.642782] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 53.643021] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 53.643199] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 53.643366] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 53.643528] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 53.643723] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 53.643727] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 53.643729] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 53.643732] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 53.643734] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 53.643736] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 53.643738] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 53.643741] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 53.643743] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 53.643746] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 53.643880] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 53.644210] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 53.644519] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 53.646139] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 53.646337] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 53.646536] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 53.646732] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 53.646950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 53.647139] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 53.647311] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 53.647483] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 53.647639] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 53.647822] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 53.647990] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 53.648144] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 53.648302] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.648444] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.648581] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.648714] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.648852] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.648995] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.649143] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.649267] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.649401] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.649523] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.649643] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.649760] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.649891] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.650015] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.650142] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.650252] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.650352] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 53.650477] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 53.650593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 53.651202] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 53.651318] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 53.651432] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 53.651891] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 53.652003] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 53.652115] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 53.652726] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 53.652875] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 53.652984] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.653084] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 53.653171] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.653257] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 53.653340] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.653420] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.653499] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.653576] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.653651] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.653727] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.653807] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.653885] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.653957] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 53.654046] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 53.654152] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 53.655563] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 53.673066] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 53.694185] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.694651] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.695957] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 53.696221] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.699035] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 53.699257] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.701695] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 53.701944] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.745750] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 53.746770] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.747129] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.747416] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.747737] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 53.748708] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 53.749064] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 53.749336] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 53.751031] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 0: start 0x90008 <7>[ 53.751393] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 1: start 0x90108 <7>[ 53.751736] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 2: start 0x90208 <7>[ 53.752159] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 3: start 0x90308 <7>[ 53.752488] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 4: start 0x903c8 <7>[ 53.752831] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 0: start 0x98008 <7>[ 53.753231] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 1: start 0x98108 <7>[ 53.753566] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 2: start 0x98208 <7>[ 53.753915] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 3: start 0x98308 <7>[ 53.754223] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 4: start 0x983c8 <7>[ 53.754522] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 0: start 0x52008 <7>[ 53.754873] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 1: start 0x52108 <7>[ 53.755165] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 2: start 0x52208 <7>[ 53.755444] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 3: start 0x52308 <7>[ 53.755719] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 4: start 0x523c8 <7>[ 53.756413] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 53.756704] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 53.757027] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 53.757400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe B] enable: no [fastset] <7>[ 53.757743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:207:pipe C] enable: no [fastset] <7>[ 53.759392] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 53.759637] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 53.763609] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe B] <7>[ 53.764067] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:207:pipe C] <7>[ 53.771968] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:211:eDP-1] adding connector to sysfs <7>[ 53.774362] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:211:eDP-1] backlight device intel_backlight registered <7>[ 53.774528] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:211:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 53.774661] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:211:eDP-1] Panel prepare <7>[ 53.775104] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 53.776285] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:211:eDP-1] generating connector hotplug event <7>[ 53.776347] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:220:DP-1] adding connector to sysfs <7>[ 53.776715] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 53.777368] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:220:DP-1] generating connector hotplug event <7>[ 53.777405] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:232:DP-2] adding connector to sysfs <7>[ 53.777781] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 53.778408] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:232:DP-2] generating connector hotplug event <7>[ 53.778442] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:240:DP-3] adding connector to sysfs <7>[ 53.778797] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 53.779511] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:240:DP-3] generating connector hotplug event <6>[ 53.779539] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 53.779564] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 53.788922] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 53.791943] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 53.793461] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 53.793627] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 53.794110] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 53.794115] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 53.795473] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 53.795667] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.795852] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:220:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.796004] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 53.796182] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.796319] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:232:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.796453] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 53.796611] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.796746] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:240:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.796892] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 53.796845] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 53.796981] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:148:pipe B] not active, skipping <6>[ 53.797019] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 53.797107] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:207:pipe C] not active, skipping <7>[ 53.797229] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 53.797587] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.797633] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 53.798461] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 53.798491] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 53.799320] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.799652] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.799797] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.799955] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.800246] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.800252] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.800254] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.800255] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.800257] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.800259] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.800261] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 53.800266] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.800267] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 53.800269] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.800296] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 53.800451] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.800590] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.801106] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] status updated from unknown to connected <7>[ 53.801638] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 53.802493] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.802495] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.802497] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.802509] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 53.802549] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 53.802556] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.802560] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.802563] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 53.802567] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 53.802762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 53.802766] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 53.802769] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 53.802938] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 53.802941] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 53.802944] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 53.803098] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 53.803101] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 53.803104] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 53.803106] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 53.803108] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 53.803148] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 53.803155] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 53.803216] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.803344] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 53.803347] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 53.803360] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.803489] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 53.803502] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 53.810752] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 53.811582] fbcon: xedrmfb (fb0) is primary device <7>[ 53.813188] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:211:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 53.813390] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:210:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 53.813547] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 53.813711] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 53.813944] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:210:DDI A/PHY A] [CRTC:89:pipe A] <7>[ 53.814098] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 53.814249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in dpll_hw_state <7>[ 53.814395] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 53.814541] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.814685] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 270000, fracen: yes, <7>[ 53.814833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.814971] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.815106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 53.815238] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.815370] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.815500] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.815626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.815750] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.815887] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.816012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 53.816133] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.816255] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 53.816375] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.816494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 53.816615] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.816735] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.816866] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.816988] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.817110] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.817230] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.817347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 53.817464] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 53.817583] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 53.817702] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7>[ 53.817834] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:89:pipe A] releasing DPLL 0 <7>[ 53.818014] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 53.818156] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 53.818281] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 53.818404] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 53.818526] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 53.818647] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.818765] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.818929] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.819045] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.819159] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.819272] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.819383] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.819503] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.819624] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.819735] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.819862] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.819968] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.820074] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.820195] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.820322] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.820436] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.820544] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.820649] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.820753] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.820874] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.821339] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:89:pipe A] data rate 1390840 num active planes 1 <7>[ 53.821492] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 53.821633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 53.821771] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.821919] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.822055] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 53.822261] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:89:pipe A] allocated DPLL 0 <7>[ 53.822416] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 53.822571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [modeset] <7>[ 53.822718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.822863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 53.822991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.823118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.823248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.823382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.823509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 53.823635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.823759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.823895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.824020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 53.824147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.824280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 53.824420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 53.824552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 53.824684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 53.824820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 53.824947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 53.825072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 53.825195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.825316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 53.825438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 53.825564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.825703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.825840] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.825963] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.826082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.826202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.826324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 53.826449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.826578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.826702] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.826824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.826941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.827077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 53.827213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.827339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 53.827463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.827582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.827711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.827839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.827956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.828075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.828191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 53.828306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.828421] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.828536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.828656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.828774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.828903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.829005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.829104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.829202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.829299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.829397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.829501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.829602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:212] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 53.829696] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 53.829781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 53.829892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 53.829998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 53.830103] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 53.830206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 53.830310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7>[ 53.843904] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.844090] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.844226] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.844333] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.844436] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.844537] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.844647] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.844755] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.844886] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.845015] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.845142] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.845262] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.845366] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.845469] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.845571] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.845663] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.845756] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.845906] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.846028] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.846144] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.846245] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.846346] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.846439] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.846531] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.846627] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.846721] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.846818] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.846931] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.847044] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.847158] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.847270] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.847381] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.847489] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.847596] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.847702] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.847798] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.850625] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <6>[ 53.850928] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 53.850891] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 53.851296] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <6>[ 53.852932] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 53.856816] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 53.858888] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 53.859552] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 53.873875] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 54.055011] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 0 <7>[ 54.057028] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.067257] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.067586] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.067790] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.067960] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.068301] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - short <7>[ 54.120275] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.120624] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - short <7>[ 54.127842] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.128263] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7>[ 54.128245] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 54.128663] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 54.129193] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 54.129584] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 54.130474] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 54.131049] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:210:DDI A/PHY A] <7>[ 54.131360] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DDI TC1/PHY TC1] <7>[ 54.131659] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST A] <7>[ 54.131996] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:222:DP-MST B] <7>[ 54.132342] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:223:DP-MST C] <7>[ 54.132628] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:231:DDI TC2/PHY TC2] <7>[ 54.132938] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DP-MST A] <7>[ 54.133229] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:234:DP-MST B] <7>[ 54.133510] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST C] <7>[ 54.133784] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:239:DDI TC3/PHY TC3] <7>[ 54.134089] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:241:DP-MST A] <7>[ 54.134413] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:242:DP-MST B] <7>[ 54.134683] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:243:DP-MST C] <7>[ 54.135075] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.136742] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7>[ 54.137144] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 54.138783] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power on <7>[ 54.139141] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining) <7>[ 54.155566] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.155868] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - long <7>[ 54.156136] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 54.156423] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 54.281899] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 54.631027] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 54.671883] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.672240] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 54.672585] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 54.708888] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.709470] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - long <7>[ 54.709920] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 54.710498] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 54.863768] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.863774] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.863907] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.883278] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.883674] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on <7>[ 54.884098] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 54.886171] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.887399] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 54.888184] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 54.889313] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 54.890488] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 54.891588] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 54.891969] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 54.893398] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 54.893777] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 54.894627] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 54.895194] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 54.895575] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 54.895996] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 192000 <7>[ 54.912150] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 54.914549] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:211:eDP-1] <7>[ 54.914936] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:89:pipe A] <7>[ 54.916364] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 54.917755] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 54.919344] Console: switching <7>[ 54.919153] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <4>[ 54.919347] to colour frame buffer device 180x56 <7>[ 54.919867] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:211:eDP-1] set backlight level = 13892 <6>[ 54.950882] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 54.950915] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 54.951491] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 54.952052] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 54.952557] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 54.953035] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 54.953470] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 54.953909] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 54.954384] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 54.954794] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 54.955249] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 54.955706] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 54.956136] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 54.956571] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 54.956991] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 54.957384] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 54.957847] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 54.958258] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 54.958611] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 54.958984] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 54.959312] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 54.959627] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 54.959972] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 54.961754] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 54.962039] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 54.962317] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 54.962592] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 54.962881] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 54.963128] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 54.963354] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.963576] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.964133] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.966864] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 54.981632] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.982615] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 54.996199] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 54.996229] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.996987] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 54.997017] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 54.998048] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.998746] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.999242] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.999649] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.000416] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.000433] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.000440] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.000444] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.000452] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.000459] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.000464] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 55.000483] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.000486] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 55.000492] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.000546] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 55.000929] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.001293] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.002496] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.002502] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.002507] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.002687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 55.002709] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.002720] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.002730] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 55.002739] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 55.003224] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.003689] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.004121] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.004514] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.004852] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 55.004863] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 55.004872] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 55.005212] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.005497] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 55.005504] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 55.005511] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 55.005846] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.006092] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 55.006098] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 55.006104] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 55.006110] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 55.006114] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 55.006340] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.006381] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 55.006387] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.006442] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.008357] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.008596] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.012749] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.030869] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.031318] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.032302] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.033518] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.034490] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.047152] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.047454] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.047974] [IGT] xe_module_load: exiting, ret=0 <7>[ 55.079882] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.080362] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.081421] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.015475] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.015495] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.015520] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.555704] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD off <7>[ 57.556087] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067