<5>[ 0.000000] Linux version 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Nov 28 11:26:07 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x689cb118 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000386] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000387] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004884] esrt: Reserving ESRT space from 0x00000000689cb118 to 0x00000000689cb268. <7>[ 0.004892] e820: update [mem 0x689cb000-0x689cbfff] usable ==> reserved <6>[ 0.004909] Using GB pages for direct mapping <6>[ 0.005517] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005518] printk: early log buf free: 258816(98%) <6>[ 0.005519] Secure boot disabled <6>[ 0.005520] ACPI: Early table checksum verification disabled <6>[ 0.005523] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005526] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005530] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005533] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005534] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005536] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005537] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005539] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005540] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005541] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005543] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005544] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005545] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005547] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005548] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005549] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005551] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005552] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005553] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005555] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005556] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005557] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005558] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005560] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005561] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005562] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005564] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005565] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005566] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005568] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005569] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005570] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005571] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005573] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005574] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005575] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005577] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005578] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005579] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005580] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005582] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005583] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005584] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005586] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005587] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005588] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005590] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005591] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005592] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005594] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005595] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005596] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005596] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005596] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005597] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005597] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005597] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005597] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005598] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005598] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005598] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005599] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005599] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005599] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005599] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005600] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005600] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005600] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005601] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005601] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005601] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005601] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005602] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005602] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005602] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005603] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005603] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005603] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005603] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005604] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005604] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005604] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005604] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005605] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005605] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005605] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005606] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005606] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005606] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005606] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005607] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005607] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005607] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005608] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005608] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005608] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005609] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005609] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005678] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005879] No NUMA configuration found <6>[ 0.005880] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005885] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.005999] Zone ranges: <6>[ 0.006000] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006001] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006001] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006002] Device empty <6>[ 0.006002] Movable zone start for each node <6>[ 0.006003] Early memory node ranges <6>[ 0.006003] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006004] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006005] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006005] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006006] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006011] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006026] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007585] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035409] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035416] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.035903] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.035909] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.035961] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.035962] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.035963] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.035966] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.035967] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.035978] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.035984] TSC deadline timer available <6>[ 0.035986] CPU topo: Max. logical packages: 1 <6>[ 0.035987] CPU topo: Max. logical dies: 1 <6>[ 0.035987] CPU topo: Max. dies per package: 1 <6>[ 0.035988] CPU topo: Max. threads per core: 1 <6>[ 0.035989] CPU topo: Num. cores per package: 8 <6>[ 0.035989] CPU topo: Num. threads per package: 8 <6>[ 0.035989] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036001] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036002] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036003] PM: hibernation: Registered nosave memory: [mem 0x689cb000-0x689cbfff] <6>[ 0.036004] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036005] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036006] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036007] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036008] Booting paravirtualized kernel on bare hardware <6>[ 0.036010] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036018] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036341] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.036345] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036346] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036359] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036444] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036461] random: crng init done <6>[ 0.038302] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039227] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039287] software IO TLB: area num 8. <6>[ 0.046620] Fallback order for Node 0: 0 <6>[ 0.046624] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046624] Policy zone: Normal <6>[ 0.046633] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046634] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046636] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047553] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079219] ********************************************************** <4>[ 0.079220] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079220] ** ** <4>[ 0.079220] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079221] ** via the console, logs, and other interfaces. This ** <4>[ 0.079221] ** might reduce the security of your system. ** <4>[ 0.079221] ** ** <4>[ 0.079221] ** If you see this message and you are not debugging ** <4>[ 0.079221] ** the kernel, report this immediately to your system ** <4>[ 0.079222] ** administrator! ** <4>[ 0.079222] ** ** <4>[ 0.079222] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079222] ** ** <4>[ 0.079222] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079222] ********************************************************** <6>[ 0.080304] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.088491] ftrace: allocating 60622 entries in 240 pages <6>[ 0.088493] ftrace: allocated 240 pages with 4 groups <6>[ 0.089905] Dynamic Preempt: voluntary <6>[ 0.090401] Running RCU self tests <6>[ 0.090402] Running RCU synchronous self tests <6>[ 0.090402] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090403] rcu: RCU lockdep checking is enabled. <6>[ 0.090403] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090403] Trampoline variant of Tasks RCU enabled. <6>[ 0.090404] Rude variant of Tasks RCU enabled. <6>[ 0.090404] Tracing variant of Tasks RCU enabled. <6>[ 0.090404] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090405] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090469] Running RCU synchronous self tests <6>[ 0.090473] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090476] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090478] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.100623] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.101089] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.101501] Console: colour dummy device 80x25 <6>[ 0.101509] printk: legacy console [tty0] enabled <6>[ 0.102636] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.102644] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.102647] ... MAX_LOCK_DEPTH: 48 <6>[ 0.102651] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.102654] ... CLASSHASH_SIZE: 4096 <6>[ 0.102658] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.102661] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.102665] ... CHAINHASH_SIZE: 262144 <6>[ 0.102669] memory used by lock dependency info: 54145 kB <6>[ 0.102673] memory used for stack traces: 4224 kB <6>[ 0.102677] per task-struct memory footprint: 1920 bytes <6>[ 0.102724] ACPI: Core revision 20250807 <6>[ 0.103579] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.103642] APIC: Switch to symmetric I/O mode setup <6>[ 0.103647] DMAR: Host address width 38 <6>[ 0.103651] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.103685] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.103716] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.103737] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.103762] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.103783] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.103817] DMAR: SATC flags: 0x1 <6>[ 0.103825] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.103830] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.103835] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.105877] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111131] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.111149] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.111223] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.111228] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.111409] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.111414] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.111424] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.111437] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.111445] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.111450] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.111454] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.111462] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.111478] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.111484] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.111489] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.111493] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.111499] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.111505] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.111511] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.111516] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.111521] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.111526] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.111531] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.112144] Freeing SMP alternatives memory: 56K <6>[ 0.112144] pid_max: default: 32768 minimum: 301 <6>[ 0.112144] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.112144] landlock: Up and running. <6>[ 0.112144] Yama: becoming mindful. <6>[ 0.112144] AppArmor: AppArmor initialized <6>[ 0.112144] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112144] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112144] Running RCU synchronous self tests <6>[ 0.112144] Running RCU synchronous self tests <6>[ 0.112144] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.112144] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.112144] core: cpu_core PMU driver: <6>[ 0.112144] ... version: 6 <6>[ 0.112144] ... bit width: 48 <6>[ 0.112144] ... generic counters: 10 <6>[ 0.112144] ... generic bitmap: 00000000000003ff <6>[ 0.112144] ... fixed-purpose counters: 4 <6>[ 0.112144] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.112144] ... value mask: 0000ffffffffffff <6>[ 0.112144] ... max period: 00007fffffffffff <6>[ 0.112144] ... global_ctrl mask: 0001000f000003ff <6>[ 0.112210] signal: max sigframe size: 3632 <6>[ 0.112235] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.112336] rcu: Hierarchical SRCU implementation. <6>[ 0.112341] rcu: Max phase no-delay instances is 400. <6>[ 0.112485] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.114308] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.114568] smp: Bringing up secondary CPUs ... <6>[ 0.114910] smpboot: x86: Booting SMP configuration: <6>[ 0.114916] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010869] core: cpu_atom PMU driver: <6>[ 0.010869] ... version: 6 <6>[ 0.010869] ... bit width: 48 <6>[ 0.010869] ... generic counters: 8 <6>[ 0.010869] ... generic bitmap: 00000000000000ff <6>[ 0.010869] ... fixed-purpose counters: 6 <6>[ 0.010869] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010869] ... value mask: 0000ffffffffffff <6>[ 0.010869] ... max period: 00007fffffffffff <6>[ 0.010869] ... global_ctrl mask: 00000077000000ff <6>[ 0.124178] smp: Brought up 1 node, 8 CPUs <6>[ 0.124223] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.125836] Memory: 32358484K/33158528K available (25429K kernel code, 5652K rwdata, 9544K rodata, 5704K init, 68232K bss, 777192K reserved, 0K cma-reserved) <6>[ 0.126495] devtmpfs: initialized <6>[ 0.126495] x86/mm: Memory block size: 128MB <6>[ 0.148382] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.149191] Running RCU synchronous self tests <6>[ 0.149204] Running RCU synchronous self tests <6>[ 0.150178] Running RCU Tasks wait API self tests <6>[ 0.150402] Running RCU Tasks Rude wait API self tests <6>[ 0.150402] Running RCU Tasks Trace wait API self tests <6>[ 0.163211] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.163627] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.164174] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.164534] pinctrl core: initialized pinctrl subsystem <6>[ 0.165148] PM: RTC time: 13:37:25, date: 2025-11-28 <6>[ 0.165917] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.166906] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.167214] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.167494] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.167552] audit: initializing netlink subsys (disabled) <5>[ 0.167591] audit: type=2000 audit(1764337045.056:1): state=initialized audit_enabled=0 res=1 <6>[ 0.168704] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.168706] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.168712] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.168717] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.168721] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.168756] cpuidle: using governor ladder <6>[ 0.168756] cpuidle: using governor menu <6>[ 0.169147] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.169592] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.169624] PCI: Using configuration type 1 for base access <6>[ 0.169743] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.171199] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.171208] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.171216] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.171223] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.175225] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.175232] raid6: using avx2x2 recovery algorithm <6>[ 0.175844] fbcon: Taking over console <6>[ 0.176035] ACPI: Added _OSI(Module Device) <6>[ 0.176043] ACPI: Added _OSI(Processor Device) <6>[ 0.176051] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.182181] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.828032] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.867239] ACPI: EC: EC started <6>[ 0.867269] ACPI: EC: interrupt blocked <6>[ 0.875080] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.875095] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.897842] Callback from call_rcu_tasks() invoked. <6>[ 1.204822] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.204832] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.245674] ACPI: Interpreter enabled <6>[ 1.245769] ACPI: PM: (supports S0 S4 S5) <6>[ 1.245773] ACPI: Using IOAPIC for interrupt routing <6>[ 1.251257] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.251264] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.281722] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.281804] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.360886] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.361450] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.364290] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.822518] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.835979] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 2.011584] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 2.013192] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 2.021734] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 2.031342] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.031607] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.031866] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.387306] ACPI: \_TZ_.FN00: New power resource <6>[ 2.388876] ACPI: \_TZ_.FN01: New power resource <6>[ 2.395404] ACPI: \_TZ_.FN02: New power resource <6>[ 2.397803] ACPI: \_TZ_.FN03: New power resource <6>[ 2.398508] ACPI: \_TZ_.FN04: New power resource <6>[ 2.400321] ACPI: \PIN_: New power resource <6>[ 2.406694] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.406719] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.410905] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.420277] PCI host bridge to bus 0000:00 <6>[ 2.420309] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.420316] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.420323] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.420330] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.420337] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.420345] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.423322] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.424019] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.424112] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.424121] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.424130] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.424176] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.425829] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.425859] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.427079] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.427109] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.427116] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.428000] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.428042] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.428054] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.428072] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.428188] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.428260] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.432402] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.432445] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.432457] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.432475] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.432591] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.432655] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.436890] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.436935] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.436947] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.436966] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.437081] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.437184] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.442471] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.442509] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.442523] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.442757] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.442786] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.442793] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.443243] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.443296] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.443367] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.444957] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.445010] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.445018] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.445076] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.445080] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.446656] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.446709] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.446717] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.446775] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.446779] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.448094] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.448152] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.448222] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.451021] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.451111] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.451209] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.451676] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.451729] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.451796] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.453850] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.453913] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.453922] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.454236] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.454344] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.465396] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.465466] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.477380] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.477473] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.493296] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.493510] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.516816] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.517212] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.517682] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.523118] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.523183] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.523193] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.523201] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.523356] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.523428] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.527933] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.528039] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.528070] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.528406] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.528608] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.533488] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.534988] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.535103] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.535118] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.535254] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.536075] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.536143] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.536152] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.537345] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.537526] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.537974] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.538145] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.538309] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.538499] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.538571] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.538581] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.538590] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.538754] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.538758] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.541407] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.543616] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.544882] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.544989] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.548454] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.548594] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.975605] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 12.790082] Low-power S0 idle used by default for system suspend <6>[ 12.843054] ACPI: EC: interrupt unblocked <6>[ 12.843065] ACPI: EC: event unblocked <6>[ 12.843102] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 12.843108] ACPI: EC: GPE=0x6e <6>[ 12.843114] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 12.843123] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 12.844181] iommu: Default domain type: Translated <6>[ 12.844200] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 12.848067] SCSI subsystem initialized <7>[ 12.849288] libata version 3.00 loaded. <6>[ 12.849639] ACPI: bus type USB registered <6>[ 12.849953] usbcore: registered new interface driver usbfs <6>[ 12.849953] usbcore: registered new interface driver hub <6>[ 12.849953] usbcore: registered new device driver usb <6>[ 12.849953] pps_core: LinuxPPS API ver. 1 registered <6>[ 12.849953] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 12.849953] PTP clock support registered <6>[ 12.851244] EDAC MC: Ver: 3.0.0 <6>[ 12.853474] efivars: Registered efivars operations <6>[ 12.856775] NetLabel: Initializing <6>[ 12.856786] NetLabel: domain hash size = 128 <6>[ 12.856797] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 12.856967] NetLabel: unlabeled traffic allowed by default <6>[ 12.857007] mctp: management component transport protocol core <6>[ 12.857020] NET: Registered PF_MCTP protocol family <6>[ 12.857131] PCI: Using ACPI for IRQ routing <7>[ 12.919621] PCI: pci_cache_line_size set to 64 bytes <6>[ 12.919917] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 12.920081] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 12.920100] e820: reserve RAM buffer [mem 0x689cb000-0x6bffffff] <7>[ 12.920107] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 12.920114] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 12.920120] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 12.921465] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 12.921465] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 12.921465] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 12.921465] vgaarb: loaded <7>[ 12.926176] Monitor-Mwait will be used to enter C-1 state <7>[ 12.926274] Monitor-Mwait will be used to enter C-2 state <7>[ 12.926274] Monitor-Mwait will be used to enter C-3 state <6>[ 12.935713] clocksource: Switched to clocksource tsc-early <5>[ 12.936553] VFS: Disk quotas dquot_6.6.0 <6>[ 12.936585] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 12.939177] AppArmor: AppArmor Filesystem Enabled <6>[ 12.939501] pnp: PnP ACPI init <6>[ 12.941272] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 12.941294] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 12.944391] system 00:02: [io 0x06a4] has been reserved <6>[ 12.944411] system 00:02: [io 0x06a0] has been reserved <6>[ 12.967029] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 12.967041] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 12.967051] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 12.967059] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 12.967068] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 12.967078] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 12.967086] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 12.967094] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 12.969797] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 12.972233] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 12.972400] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 12.977074] pnp: PnP ACPI: found 8 devices <6>[ 13.006498] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 13.007164] NET: Registered PF_INET protocol family <6>[ 13.007502] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.013507] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 13.013935] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 13.014289] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.015679] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 13.018955] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 13.019696] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.021326] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.023060] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 13.023203] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 13.023232] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 13.023256] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 13.023354] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 13.023372] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 13.023388] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 13.023406] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 13.023464] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 13.023519] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 13.023574] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 13.023629] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 13.023705] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 13.023726] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 13.023747] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 13.023775] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.023803] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 13.023818] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 13.023838] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 13.023858] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.023910] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 13.023925] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 13.023946] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 13.023966] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.023996] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 13.024010] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 13.024030] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 13.024059] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 13.024107] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 13.024170] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 13.024186] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 13.024200] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 13.024217] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 13.024232] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 13.024250] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 13.024263] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 13.024277] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.024295] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 13.024309] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 13.024324] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.024341] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 13.024354] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 13.024369] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.024388] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 13.024401] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 13.024416] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 13.026788] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 13.030241] PCI: CLS 0 bytes, default 64 <6>[ 13.030449] DMAR: No RMRR found <6>[ 13.030471] DMAR: No ATSR found <6>[ 13.030480] DMAR: dmar1: Using Queued invalidation <6>[ 13.030497] DMAR: dmar0: Using Queued invalidation <6>[ 13.030511] DMAR: dmar2: Using Queued invalidation <6>[ 13.032893] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 13.033107] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 13.033288] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 13.033446] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 13.041476] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 13.045836] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 13.046550] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 13.049313] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 13.050022] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 13.050384] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 13.050500] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 13.050607] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 13.050794] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 13.050967] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 13.051156] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 13.051265] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 13.051492] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 13.051602] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 13.051715] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 13.051824] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 13.051999] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 13.052151] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 13.052326] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 13.052555] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 13.052673] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 13.052787] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 13.052910] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 13.053060] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 13.053238] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 13.074300] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 13.074309] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 13.074315] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 13.079251] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 13.079361] clocksource: Switched to clocksource tsc <6>[ 13.079527] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 13.088492] Initialise system trusted keyrings <5>[ 13.088592] Key type blacklist registered <6>[ 13.089210] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 13.110024] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 13.110221] ntfs3: Enabled Linux POSIX ACLs support <6>[ 13.110233] ntfs3: Read-only LZX/Xpress compression included <5>[ 13.110941] integrity: Platform Keyring initialized <5>[ 13.110979] integrity: Machine keyring initialized <6>[ 13.123454] xor: automatically using best checksumming function avx <5>[ 13.123473] Key type asymmetric registered <5>[ 13.123495] Asymmetric key parser 'x509' registered <6>[ 13.123692] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 13.125204] io scheduler mq-deadline registered <6>[ 13.128407] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 13.129592] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 13.130308] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 13.133277] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 13.134225] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 13.136040] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 13.136760] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 13.139054] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 13.139907] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 13.141559] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 13.142379] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 13.146069] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 13.146449] ACPI: button: Lid Switch [LID0] <6>[ 13.146970] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 13.147323] ACPI: button: Sleep Button [SLPB] <6>[ 13.147771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 13.148516] ACPI: button: Power Button [PWRB] <6>[ 13.321027] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 13.321050] ACPI: thermal: Thermal Zone [TZ00] (70 C) <6>[ 13.323515] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 13.323849] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 13.326398] ACPI: battery: Slot [BAT0] (battery present) <6>[ 13.349237] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 13.394603] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 13.400389] hpet_acpi_add: no address or irqs in _CRS <6>[ 13.400598] Linux agpgart interface v0.103 <6>[ 13.401843] ACPI: bus type drm_connector registered <7>[ 13.403486] initcall simpledrm_platform_driver_init blacklisted <6>[ 13.436971] loop: module loaded <6>[ 13.509821] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 13.729214] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 13.857083] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 13.986752] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 14.099309] Key type psk registered <6>[ 14.101528] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 14.102501] nvme nvme0: pci function 0000:80:00.0 <6>[ 14.103240] tun: Universal TUN/TAP device driver, 1.6 <6>[ 14.104159] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.104261] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 14.106170] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.108093] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.108120] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 14.108139] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.108539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 14.108560] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.108571] usb usb1: Product: xHCI Host Controller <6>[ 14.108578] usb usb1: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ xhci-hcd <6>[ 14.108591] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 14.109740] hub 1-0:1.0: USB hub found <6>[ 14.109829] hub 1-0:1.0: 1 port detected <6>[ 14.114862] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 14.114884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.114895] usb usb2: Product: xHCI Host Controller <6>[ 14.114903] usb usb2: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ xhci-hcd <6>[ 14.114915] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 14.115722] hub 2-0:1.0: USB hub found <6>[ 14.115767] hub 2-0:1.0: 3 ports detected <6>[ 14.138051] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 14.140142] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.140188] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 14.142649] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.144466] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.144494] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 14.144515] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.144757] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 14.144771] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.144781] usb usb3: Product: xHCI Host Controller <6>[ 14.144789] usb usb3: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ xhci-hcd <6>[ 14.144801] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 14.145659] hub 3-0:1.0: USB hub found <6>[ 14.145709] hub 3-0:1.0: 8 ports detected <6>[ 14.146212] nvme0n1: p1 p2 <6>[ 14.173641] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 14.173661] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.173672] usb usb4: Product: xHCI Host Controller <6>[ 14.173680] usb usb4: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ xhci-hcd <6>[ 14.173692] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 14.175219] hub 4-0:1.0: USB hub found <6>[ 14.175265] hub 4-0:1.0: 2 ports detected <6>[ 14.182861] usbcore: registered new interface driver usb-storage <6>[ 14.183049] usbcore: registered new interface driver usbserial_generic <6>[ 14.183148] usbserial: USB Serial support registered for generic <6>[ 14.183226] usbcore: registered new interface driver ftdi_sio <6>[ 14.183264] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 14.183333] usbcore: registered new interface driver pl2303 <6>[ 14.183370] usbserial: USB Serial support registered for pl2303 <6>[ 14.183501] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 14.183511] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 14.895502] i8042: Can't read CTR while initializing i8042 <3>[ 14.895516] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 14.896118] mousedev: PS/2 mouse device common for all mice <6>[ 14.897222] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 14.899161] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 14.899382] rtc_cmos rtc_cmos: setting system clock to 2025-11-28T13:37:40 UTC (1764337060) <6>[ 14.899568] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 14.899622] i2c_dev: i2c /dev entries driver <6>[ 14.904062] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 14.904078] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 14.904089] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 14.904132] device-mapper: uevent: version 1.0.3 <6>[ 14.904500] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 14.904519] intel_pstate: Intel P-state driver initializing <6>[ 14.908379] Hybrid CPU capacity scaling enabled <6>[ 14.908737] processor cpu0: EM: created perf domain <6>[ 14.909009] processor cpu1: EM: created perf domain <6>[ 14.909267] processor cpu2: EM: created perf domain <6>[ 14.909538] processor cpu3: EM: created perf domain <6>[ 14.909817] processor cpu4: EM: created perf domain <6>[ 14.910098] processor cpu5: EM: created perf domain <6>[ 14.910345] processor cpu6: EM: created perf domain <6>[ 14.910595] processor cpu7: EM: created perf domain <6>[ 14.912284] intel_pstate: HWP enabled <6>[ 14.912298] sdhci: Secure Digital Host Controller Interface driver <6>[ 14.912307] sdhci: Copyright(c) Pierre Ossman <6>[ 14.912572] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 14.916094] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 14.917285] drop_monitor: Initializing network drop monitor service <6>[ 14.917568] NET: Registered PF_INET6 protocol family <6>[ 14.919052] Segment Routing with IPv6 <6>[ 14.919107] In-situ OAM (IOAM) with IPv6 <6>[ 14.919166] NET: Registered PF_PACKET protocol family <5>[ 14.919387] Key type dns_resolver registered <4>[ 14.923281] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 14.923557] microcode: Current revision: 0x00000124 <6>[ 14.924072] IPI shorthand broadcast: enabled <6>[ 14.938470] sched_clock: Marking stable (14928001615, 9869585)->(15028711804, -90840604) <6>[ 14.940352] registered taskstats version 1 <5>[ 14.941347] Loading compiled-in X.509 certificates <6>[ 14.986359] Demotion targets for Node 0: null <6>[ 14.986653] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 14.986655] kmemleak: Automatic memory scanning thread started <5>[ 14.986912] Key type .fscrypt registered <5>[ 14.986918] Key type fscrypt-provisioning registered <6>[ 14.989834] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 14.991913] Key type encrypted registered <6>[ 14.991923] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 14.992021] ima: No TPM chip found, activating TPM-bypass! <5>[ 14.992038] Loading compiled-in module X.509 certificates <5>[ 14.992703] Loaded X.509 cert 'Build time autogenerated kernel key: 8564dbba486f992279ec1f05932a2a15fc602e4c' <6>[ 14.992715] ima: Allocated hash algorithm: sha256 <6>[ 14.992759] ima: No architecture policies found <6>[ 14.992843] evm: Initialising EVM extended attributes: <6>[ 14.992847] evm: security.selinux <6>[ 14.992850] evm: security.SMACK64 <6>[ 14.992853] evm: security.SMACK64EXEC <6>[ 14.992857] evm: security.SMACK64TRANSMUTE <6>[ 14.992860] evm: security.SMACK64MMAP <6>[ 14.992863] evm: security.apparmor <6>[ 14.992867] evm: security.ima <6>[ 14.992874] evm: security.capability <6>[ 14.992877] evm: HMAC attrs: 0x1 <6>[ 14.994941] PM: Magic number: 1:97:636 <6>[ 14.995144] netconsole: network logging started <6>[ 14.995743] RAS: Correctable Errors collector initialized. <6>[ 14.996310] clk: Disabling unused clocks <6>[ 14.996323] PM: genpd: Disabling unused power domains <4>[ 14.996773] check access for rdinit=/init failed: -2, ignoring <6>[ 14.996780] md: Waiting for all devices to be available before autodetect <6>[ 14.996785] md: If you don't use raid, use raid=noautodetect <6>[ 14.996790] md: Autodetecting RAID arrays. <6>[ 14.996797] md: autorun ... <6>[ 14.996800] md: ... autorun DONE. <6>[ 15.048272] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none. <6>[ 15.048352] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 15.049467] devtmpfs: mounted <6>[ 15.065108] Freeing unused decrypted memory: 2036K <6>[ 15.065911] Freeing unused kernel image (initmem) memory: 5704K <6>[ 15.065935] Write protecting the kernel read-only data: 36864k <6>[ 15.066582] Freeing unused kernel image (text/rodata gap) memory: 1192K <6>[ 15.066768] Freeing unused kernel image (rodata/data gap) memory: 696K <6>[ 15.071330] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 15.071357] Run /sbin/init as init process <7>[ 15.071361] with arguments: <7>[ 15.071362] /sbin/init <7>[ 15.071363] with environment: <7>[ 15.071363] HOME=/ <7>[ 15.071364] TERM=linux <7>[ 15.126444] systemd[1]: Inserted module 'autofs4' <7>[ 15.152479] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 15.152519] systemd[1]: Detected architecture x86-64. <7>[ 15.154018] systemd[1]: Hostname set to . <7>[ 15.367835] systemd[1]: Queued start job for default target graphical.target. <7>[ 15.395052] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 15.399047] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 15.402109] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 15.402553] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 15.403582] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 15.403755] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61... <7>[ 15.403885] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 15.404007] systemd[1]: Reached target slices.target - Slice Units. <7>[ 15.404109] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 15.404206] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 15.404310] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 15.404639] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 15.405237] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 15.405603] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 15.405983] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 15.406286] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 15.406505] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 15.406820] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 15.407159] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 15.407441] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 15.407607] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.407890] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 15.408168] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 15.411471] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 15.414169] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 15.416861] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 15.420129] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 15.426732] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 15.430274] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 15.433460] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 15.436637] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 15.439307] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 15.442773] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 15.445969] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 15.451118] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 15.455086] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 15.459715] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 15.460798] systemd-journald[204]: Collecting audit messages is disabled. <7>[ 15.465200] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 15.465516] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 15.471250] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 15.473081] pstore: Using crash dump compression: deflate <7>[ 15.478107] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 15.478306] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.478385] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 15.478417] pstore: Registered efi_pstore as persistent store backend <6>[ 15.481789] fuse: init (API version 7.45) <7>[ 15.484557] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 15.489372] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 15.614134] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. <6>[ 15.643296] Adding 8388604k swap on /swap.img. Priority:-2 extents:65 across:341704704k SS <7>[ 15.652315] systemd-journald[204]: Received client request to flush runtime journal. <7>[ 15.669264] systemd-journald[204]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 15.669284] systemd-journald[204]: Rotating system journal. <4>[ 16.387396] nvme nvme0: using unchecked data buffer <6>[ 16.516755] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 16.548007] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 16.548649] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 16.561491] intel-hid INTC107B:00: platform supports 5 button array <6>[ 16.573431] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <5>[ 16.699493] audit: type=1400 audit(1764337062.298:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=418 comm="apparmor_parser" <5>[ 16.700085] audit: type=1400 audit(1764337062.299:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=420 comm="apparmor_parser" <5>[ 16.700469] audit: type=1400 audit(1764337062.299:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=419 comm="apparmor_parser" <5>[ 16.703894] audit: type=1400 audit(1764337062.302:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=421 comm="apparmor_parser" <5>[ 16.706391] audit: type=1400 audit(1764337062.305:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=422 comm="apparmor_parser" <5>[ 16.707107] audit: type=1400 audit(1764337062.306:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=423 comm="apparmor_parser" <5>[ 16.711145] audit: type=1400 audit(1764337062.310:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=424 comm="apparmor_parser" <5>[ 16.711338] audit: type=1400 audit(1764337062.310:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=425 comm="apparmor_parser" <5>[ 16.714033] audit: type=1400 audit(1764337062.312:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=426 comm="apparmor_parser" <5>[ 16.715748] audit: type=1400 audit(1764337062.314:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=427 comm="apparmor_parser" <3>[ 16.727380] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 16.727567] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 16.936108] pci 0000:00:05.0: Setting to D3hot <6>[ 16.948538] pci 0000:00:0b.0: Setting to D3hot <6>[ 16.960303] intel_pmc_core INT33A1:00: initialized <6>[ 17.099344] ACPI: bus type thunderbolt registered <6>[ 17.137946] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 17.153745] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 17.153754] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 17.155497] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 17.165861] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 17.197182] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 17.219691] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 17.284575] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 17.291891] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 17.293126] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 17.293489] intel_rapl_common: Found RAPL domain package <6>[ 17.293492] intel_rapl_common: Found RAPL domain dram <6>[ 17.311334] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 17.311342] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 17.311344] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 17.311345] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 17.311346] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 17.317698] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 180 <6>[ 17.317707] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 17.351432] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 17.353126] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 17.354042] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.358170] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 17.526251] block nvme0n1: No UUID available providing old NGUID <6>[ 17.576173] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 17.588074] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.597862] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.602201] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 17.602210] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 17.602212] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 17.683086] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 17.893372] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.902645] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.953976] intel_rapl_common: Found RAPL domain package <6>[ 17.953982] intel_rapl_common: Found RAPL domain core <6>[ 17.953985] intel_rapl_common: Found RAPL domain dram <6>[ 17.953987] intel_rapl_common: Found RAPL domain psys <6>[ 18.050475] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.146164] loop0: detected capacity change from 0 to 8 <4>[ 18.154005] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 18.168205] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 18.183095] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 18.188207] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 18.188231] 0x000000000000-0x000002000000 : "BIOS" <6>[ 18.257858] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.326996] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 18.486347] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 18.530678] Consider using thermal netlink events interface <6>[ 18.572262] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.597203] hid: raw HID events driver (C) Jiri Kosina <6>[ 18.605296] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 18.636320] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.643613] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.645829] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.646067] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.648507] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.648541] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.649786] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.651225] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.652037] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.653119] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.654972] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.658365] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.660984] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.664988] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.666007] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.668779] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.671727] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.675421] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.675609] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.678440] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.679241] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.681840] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.682371] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.685616] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.759329] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.767305] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.771758] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.776866] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.780634] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.785243] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.789809] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.793633] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.798418] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.801427] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.805514] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.809434] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.814219] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.819043] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.822359] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.826842] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.831392] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.835112] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.840282] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.847038] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.326570] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 20.326622] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 20.326663] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 21.344675] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 21.344721] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 21.344768] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 22.077968] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 29.268944] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 29.273221] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 29.744001] systemd-journald[204]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 52.889754] [IGT] xe_module_load: executing <4>[ 52.889800] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.897396] [IGT] xe_module_load: starting subtest load <5>[ 53.168394] Setting dangerous option force_probe - tainting kernel <6>[ 53.171314] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 53.172851] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 53.172861] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 53.173024] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 53.173158] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 53.175332] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 53.175607] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 53.175724] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 53.175844] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 53.176024] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 53.176143] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 53.176248] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 53.176340] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 53.176426] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 53.176529] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 53.176629] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 53.176746] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 53.176852] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 53.176987] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 53.177126] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 53.177260] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 53.177378] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 53.177491] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 53.177598] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 53.177705] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 53.177810] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.177963] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.178095] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 53.178236] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.178349] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.178459] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.178564] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 53.178669] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.178766] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.178861] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.178989] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 53.179112] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.179225] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.179323] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.179414] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 53.179502] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.179591] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.179680] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.179769] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 53.179857] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 53.179976] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 53.180091] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 53.180207] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 53.180683] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 53.180796] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 53.180912] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 53.181042] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 53.181173] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 53.181283] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 53.181386] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 53.181487] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 53.181587] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 53.181696] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 53.181791] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 53.181887] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 53.182005] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 53.182134] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 53.182254] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 53.182353] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 53.182440] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 53.182526] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 53.182615] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.182703] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.182799] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 53.183042] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 53.183174] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 53.183276] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.183368] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.183458] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 53.183551] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 53.183666] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 53.183818] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 53.183986] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 53.184179] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 53.184369] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 53.184509] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 53.184620] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 53.184728] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 53.184866] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 53.185013] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 53.185032] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 53.185200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 53.185329] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 53.185437] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 53.185709] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 53.186159] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 53.186558] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 53.186694] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 53.186806] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 53.186924] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 53.187037] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 53.187149] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 53.187254] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 53.187340] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 53.187422] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 53.187505] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 53.187587] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 53.187668] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 53.187749] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 53.187829] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 53.189668] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 53.189826] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 53.189975] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 53.190117] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 53.190253] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 53.190387] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 53.190524] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 53.190645] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 53.190771] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.190902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 53.191026] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.191148] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 53.191275] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.191478] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 53.191687] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 53.191895] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 53.192095] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.192294] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 53.192491] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.192690] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 53.192895] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.193084] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 53.193276] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 53.193476] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 53.193660] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 53.193843] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 53.194046] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 53.194227] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 53.194412] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 53.194608] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 53.197105] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 53.201620] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 53.201864] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 53.202112] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 53.202390] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:210:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 53.202671] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:210:DDI A/PHY A] <7>[ 53.202981] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 53.203198] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 53.203408] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 53.203623] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 53.203835] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 53.204050] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 53.204246] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 53.204435] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 53.204617] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 53.204827] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:210:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 53.205163] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.205342] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.205518] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <6>[ 53.205725] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 53.205691] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.205864] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.206143] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.206418] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 53.207909] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on <7>[ 53.208144] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 53.243910] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 53.255910] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 53.279900] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 53.303895] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 53.315895] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 53.375914] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.723926] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.723936] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.723938] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.723939] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 53.723942] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.723944] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.723945] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 53.723949] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.723950] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 53.723952] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.723985] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.723986] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 53.723987] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 53.723999] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:211:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.724123] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:211:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.735896] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:211:eDP-1] Performing OUI wait (0 ms) <7>[ 53.747900] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:211:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 53.748038] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:211:eDP-1] DRRS type: seamless <7>[ 53.748182] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:211:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 53.748308] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:211:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 53.748478] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 53.748578] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 53.748675] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 53.748772] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 53.748867] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 53.749002] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 53.749207] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:219:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 53.749397] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.749533] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:219:DDI TC1/PHY TC1] <7>[ 53.749920] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:231:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 53.750055] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.750177] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:231:DDI TC2/PHY TC2] <7>[ 53.750413] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:239:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 53.750543] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 53.750665] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:239:DDI TC3/PHY TC3] <7>[ 53.751127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:89:pipe A] hw state readout: enabled <7>[ 53.751252] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe B] hw state readout: disabled <7>[ 53.751371] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:207:pipe C] hw state readout: disabled <7>[ 53.751466] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 53.751558] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 53.751649] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 53.751740] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 53.751830] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 53.751929] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 53.752033] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:92:plane 1B] hw state readout: disabled, pipe B <7>[ 53.752146] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 2B] hw state readout: disabled, pipe B <7>[ 53.752244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 3B] hw state readout: disabled, pipe B <7>[ 53.752352] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:122:plane 4B] hw state readout: disabled, pipe B <7>[ 53.752439] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:132:plane 5B] hw state readout: disabled, pipe B <7>[ 53.752530] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:142:cursor B] hw state readout: disabled, pipe B <7>[ 53.752619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1C] hw state readout: disabled, pipe C <7>[ 53.752709] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:161:plane 2C] hw state readout: disabled, pipe C <7>[ 53.752797] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:171:plane 3C] hw state readout: disabled, pipe C <7>[ 53.752884] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 4C] hw state readout: disabled, pipe C <7>[ 53.752987] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:191:plane 5C] hw state readout: disabled, pipe C <7>[ 53.753093] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:201:cursor C] hw state readout: disabled, pipe C <7>[ 53.754033] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 53.754183] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:210:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 53.754286] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.754378] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 53.754463] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.754546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:222:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.754628] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:223:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.754712] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.754797] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:231:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 53.754891] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.754995] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:234:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.755098] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.755204] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 53.755292] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:239:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 53.755371] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:241:DP-MST A] hw state readout: disabled, pipe A <7>[ 53.755449] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:242:DP-MST B] hw state readout: disabled, pipe B <7>[ 53.755526] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:243:DP-MST C] hw state readout: disabled, pipe C <7>[ 53.756380] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 53.756480] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 53.756580] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.756676] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 53.756775] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.756871] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.757003] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.757120] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 53.757264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:211:eDP-1] hw state readout: enabled <7>[ 53.757382] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:220:DP-1] hw state readout: disabled <7>[ 53.757484] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:232:DP-2] hw state readout: disabled <7>[ 53.757582] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:240:DP-3] hw state readout: disabled <7>[ 53.757757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 53.757842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 53.757945] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 53.758053] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 53.758143] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 53.758237] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 53.758329] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:89:pipe A] min_cdclk 173855 kHz <7>[ 53.758416] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:92:plane 1B] min_cdclk 0 kHz <7>[ 53.758501] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 2B] min_cdclk 0 kHz <7>[ 53.758585] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 3B] min_cdclk 0 kHz <7>[ 53.758666] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:122:plane 4B] min_cdclk 0 kHz <7>[ 53.758747] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:132:plane 5B] min_cdclk 0 kHz <7>[ 53.758827] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:142:cursor B] min_cdclk 0 kHz <7>[ 53.758920] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe B] min_cdclk 0 kHz <7>[ 53.759024] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1C] min_cdclk 0 kHz <7>[ 53.759127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:161:plane 2C] min_cdclk 0 kHz <7>[ 53.759229] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:171:plane 3C] min_cdclk 0 kHz <7>[ 53.759315] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 4C] min_cdclk 0 kHz <7>[ 53.759392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:191:plane 5C] min_cdclk 0 kHz <7>[ 53.759467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:201:cursor C] min_cdclk 0 kHz <7>[ 53.759541] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:207:pipe C] min_cdclk 0 kHz <7>[ 53.759765] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:89:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 53.759848] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.759961] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:207:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 53.760071] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 53.760215] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 53.760338] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 53.760475] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 53.760584] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 53.760814] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [setup_hw_state] <7>[ 53.760959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.761116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 53.761248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.761359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.761460] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.761563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.761670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 53.761780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.761894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.762023] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.762141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 53.762260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.762360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 53.762458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.762556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 53.762654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 53.762752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.762855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.762989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.763119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.763239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.763338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.763432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 53.763524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.763615] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.763705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.763794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.763890] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 53.763999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 270000, fracen: yes, <7>[ 53.764115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.764229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.764321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 53.764417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.764512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.764607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.764692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.764780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.764866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.764987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 53.765112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.765236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.765341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.765434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.765527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.765618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.765707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.765797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.765892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.766005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.766119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.766231] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 53.766318] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe B] enable: no [setup_hw_state] <7>[ 53.766404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:207:pipe C] enable: no [setup_hw_state] <7>[ 53.766491] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 53.766767] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:89:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 53.766885] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:89:pipe A] <6>[ 53.780557] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 53.784218] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 53.784328] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 53.784413] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 53.784493] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.784571] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 53.784647] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.784721] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.784794] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.784866] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.784971] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.785061] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.785151] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.785239] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.785326] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.785393] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.785504] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 53.795943] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.797058] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.797353] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000000df <7>[ 53.797471] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000000df <7>[ 53.797577] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 53.797680] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 53.797770] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 54.437597] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 54.437603] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 54.437604] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 54.437768] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 54.437954] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 54.438072] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 54.438209] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 54.438348] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 54.438466] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 54.438600] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 54.438692] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 54.438785] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 54.438879] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 54.439819] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 54.439927] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 54.440045] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 54.440142] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 54.440236] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 54.440330] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 54.440420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 54.440510] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 54.440597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 54.440683] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 54.440770] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 54.440856] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 54.440953] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 54.441053] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 54.441141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 54.441225] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 54.441308] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 54.441391] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 54.441473] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 54.441556] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 54.441638] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 54.441722] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 54.441806] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 54.441892] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 54.441974] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 54.442071] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 54.442157] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 54.442241] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 54.442324] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 54.442408] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 54.442490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 54.442570] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 54.442652] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 54.442735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 54.442816] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 54.442901] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 54.442985] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 54.443090] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 54.443181] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 54.443270] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 54.443642] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 54.443730] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 54.443811] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 54.443892] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 54.444213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 54.444291] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 54.444369] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 54.444443] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 54.444748] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 54.444830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 54.444911] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 54.444990] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 54.445076] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 54.445154] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 54.445231] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 54.445674] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 54.445930] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 54.446062] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 54.446175] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 54.446253] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 54.446324] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 54.446393] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 54.446463] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 54.446529] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 54.446595] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 54.446664] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 54.446732] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 54.446800] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 54.446866] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 54.446957] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 54.447045] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 54.447223] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 54.448445] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 54.451212] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 54.468823] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 54.479030] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 54.479403] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 54.480453] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 54.480607] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 54.480712] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 54.480806] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 54.480907] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 54.480997] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 54.481084] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 54.481172] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 54.481262] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 54.483973] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 54.484093] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 54.484193] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 54.487327] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 54.487465] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 54.490704] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 54.495455] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 54.495653] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 54.495831] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 54.496022] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 54.496189] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 54.496351] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 54.496509] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 54.496660] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 54.496807] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 54.496972] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 54.497120] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 54.497261] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 54.497395] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 54.497520] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 54.499256] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 54.501790] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 54.502942] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 54.503068] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 54.503224] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 54.524164] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 54.524864] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 54.525328] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 54.525679] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 54.526041] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 54.526341] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 54.526613] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 54.526948] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 54.526953] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 54.526955] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 54.526958] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 54.526961] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 54.526964] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 54.526966] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 54.526969] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 54.526972] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 54.526975] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 54.527124] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 54.527624] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 54.528129] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 54.530331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 54.530648] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 54.530970] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 54.531263] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 54.531526] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 54.531825] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 54.532086] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 54.532331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 54.532569] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 54.532780] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 54.533003] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 54.533213] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 54.533417] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 54.533644] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 54.533856] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 54.534063] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 54.534272] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 54.534449] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 54.534623] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 54.534792] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 54.534975] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 54.535149] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 54.535304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 54.535456] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 54.535600] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 54.535742] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 54.535884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 54.536019] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 54.536147] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 54.536292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 54.536437] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 54.537010] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 54.537149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 54.537288] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 54.537774] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 54.537909] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 54.538034] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 54.538760] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 54.538958] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 54.539083] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 54.539196] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 54.539304] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 54.539402] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 54.539496] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 54.539584] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 54.539671] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 54.539758] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 54.539841] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 54.539935] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 54.540017] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 54.540095] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 54.540171] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 54.540270] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 54.540393] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 54.541980] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 54.564497] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 54.585079] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 54.585657] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 54.587155] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 54.587438] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.590911] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 54.591131] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.593965] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 54.594278] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 54.637916] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 54.639202] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.639749] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.640342] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.640924] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 54.641958] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 54.642417] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 54.642859] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 54.645244] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 0: start 0x90008 <7>[ 54.645820] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 1: start 0x90108 <7>[ 54.646470] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 2: start 0x90208 <7>[ 54.647080] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 3: start 0x90308 <7>[ 54.647558] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 4: start 0x903c8 <7>[ 54.648050] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 0: start 0x98008 <7>[ 54.648550] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 1: start 0x98108 <7>[ 54.649006] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 2: start 0x98208 <7>[ 54.649417] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 3: start 0x98308 <7>[ 54.649829] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 4: start 0x983c8 <7>[ 54.650229] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 0: start 0x52008 <7>[ 54.650641] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 1: start 0x52108 <7>[ 54.651005] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 2: start 0x52208 <7>[ 54.651338] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 3: start 0x52308 <7>[ 54.651682] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 4: start 0x523c8 <7>[ 54.652356] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 54.652630] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 54.652926] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 54.653214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe B] enable: no [fastset] <7>[ 54.653514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:207:pipe C] enable: no [fastset] <7>[ 54.654839] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 54.655065] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 54.656340] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe B] <7>[ 54.656654] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:207:pipe C] <7>[ 54.662829] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:211:eDP-1] adding connector to sysfs <7>[ 54.666156] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:211:eDP-1] backlight device intel_backlight registered <7>[ 54.666497] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:211:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 54.666788] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:211:eDP-1] Panel prepare <7>[ 54.667635] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 54.670199] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:211:eDP-1] generating connector hotplug event <7>[ 54.670329] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:220:DP-1] adding connector to sysfs <7>[ 54.671254] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 54.672571] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:220:DP-1] generating connector hotplug event <7>[ 54.672641] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:232:DP-2] adding connector to sysfs <7>[ 54.673389] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 54.674961] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:232:DP-2] generating connector hotplug event <7>[ 54.675057] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:240:DP-3] adding connector to sysfs <7>[ 54.675805] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 54.676686] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:240:DP-3] generating connector hotplug event <6>[ 54.676726] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 54.676765] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 54.686644] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 54.689778] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 54.691525] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 54.691684] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 54.693059] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 54.693070] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 54.693475] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 54.693595] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:148:pipe B] not active, skipping <7>[ 54.693701] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:207:pipe C] not active, skipping <7>[ 54.693820] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 54.694201] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 54.694405] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.694704] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:220:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.694867] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 54.695128] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.695285] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:232:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.695429] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.695419] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 54.695572] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.695705] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:240:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 54.695833] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <6>[ 54.696912] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 54.697089] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 54.697142] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 54.697669] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 54.698396] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.698728] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.699095] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.699240] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.699566] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.699571] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.699573] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.699574] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 54.699576] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.699578] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.699579] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 54.699583] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.699584] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 54.699586] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.699613] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 54.699748] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.699888] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 54.700560] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] status updated from unknown to connected <5>[ 54.700761] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.700763] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 54.700764] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 54.700820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 54.700826] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.700831] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.700835] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 54.700839] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 54.701052] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 54.701056] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 54.701059] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 54.701224] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 54.701227] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 54.701229] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 54.701396] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 54.701399] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 54.701402] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 54.701404] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 54.701406] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 54.701486] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.701503] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 54.701505] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 54.701518] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.701604] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 54.701615] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 54.702257] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 54.702525] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 54.703575] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 54.703585] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 54.709810] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 54.710760] fbcon: xedrmfb (fb0) is primary device <7>[ 54.712031] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:211:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 54.712203] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:210:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 54.712458] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 54.712782] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 54.713118] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:210:DDI A/PHY A] [CRTC:89:pipe A] <7>[ 54.713429] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 54.713738] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in dpll_hw_state <7>[ 54.714060] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 54.714359] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.714651] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 270000, fracen: yes, <7>[ 54.714951] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 54.715260] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 54.715538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 54.715810] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.716097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 54.716364] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.716630] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.716899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.717162] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 54.717422] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 54.717680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.717955] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 54.718214] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.718468] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 54.718721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.719007] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.719257] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.719504] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.719750] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.720040] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.720304] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 54.720536] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 54.720765] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 54.721023] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7>[ 54.721252] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:89:pipe A] releasing DPLL 0 <7>[ 54.721913] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 54.722174] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 54.722386] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 54.722598] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 54.722834] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 54.723070] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.723263] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.723474] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.723675] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.723869] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.724087] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.724282] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.724487] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.724674] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.724856] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.725058] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.725236] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.725441] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.725634] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.725807] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.725990] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.726153] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 54.726313] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.726474] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.726633] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 54.726859] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:89:pipe A] data rate 1390840 num active planes 1 <7>[ 54.727116] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 54.727348] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 54.727571] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.727789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 54.728018] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 54.728321] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:89:pipe A] allocated DPLL 0 <7>[ 54.728579] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 54.728805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [modeset] <7>[ 54.729045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 54.729255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 54.729475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 54.729693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 54.729915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 54.730118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 54.730319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 54.730520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 54.730720] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 54.730931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 54.731128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 54.731321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 54.731513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 54.731709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 54.731916] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 54.732108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 54.732308] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 54.732503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 54.732706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 54.732896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 54.733080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 54.733261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 54.733404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 54.733521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.733636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.733752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.733868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 54.733997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 54.734110] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 54.734224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 54.734335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 54.734493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 54.734658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 54.734807] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 54.734970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 54.735117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 54.735263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 54.735421] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 54.735571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 54.735732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 54.735913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 54.736092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 54.736264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 54.736430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 54.736604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 54.736775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.736947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.737105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.737268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.737429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.737597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 54.737754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.737917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.738062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 54.738206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 54.738350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 54.738492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:212] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 54.738635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 54.738776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 54.738928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 54.739078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 54.739236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 54.739368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 54.739481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <6>[ 54.743515] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 54.744003] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 54.753674] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.753870] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.754040] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.754180] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 54.754313] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.754443] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.754572] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.754701] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 54.754830] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.754965] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.755096] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.755225] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 54.755351] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.755476] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.755600] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.755722] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 54.755845] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.755974] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.756098] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.756219] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 54.756341] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.756462] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.756584] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.756705] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 54.756825] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.756951] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.757073] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.757192] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 54.757313] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.757433] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.757554] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.757673] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 54.757793] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.757921] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.758046] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.758169] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 54.759443] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 54.759697] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <6>[ 54.764471] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 54.766244] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <7>[ 54.766525] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <6>[ 54.768920] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 54.769937] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 54.967038] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 0 <7>[ 54.970083] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 54.973195] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power off <7>[ 54.973731] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 54.973717] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 54.974273] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 54.974512] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - short <7>[ 55.026258] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 55.026718] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - short <7>[ 55.033924] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.034609] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 55.034700] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7>[ 55.035246] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 55.036077] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 55.036661] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 55.037757] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 55.038269] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:210:DDI A/PHY A] <7>[ 55.038741] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DDI TC1/PHY TC1] <7>[ 55.039205] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST A] <7>[ 55.039682] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:222:DP-MST B] <7>[ 55.040128] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:223:DP-MST C] <7>[ 55.040567] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:231:DDI TC2/PHY TC2] <7>[ 55.041004] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DP-MST A] <7>[ 55.041461] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:234:DP-MST B] <7>[ 55.041862] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST C] <7>[ 55.042304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:239:DDI TC3/PHY TC3] <7>[ 55.042700] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:241:DP-MST A] <7>[ 55.043133] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:242:DP-MST B] <7>[ 55.043547] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:243:DP-MST C] <7>[ 55.044099] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 55.045958] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7>[ 55.046514] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 55.048697] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power on <7>[ 55.049115] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power cycle (486 ms remaining) <7>[ 55.060633] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 55.061017] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - long <7>[ 55.061371] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 55.061723] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 55.178712] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 55.543111] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 55.601549] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.601949] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 55.602293] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 55.638089] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 55.638660] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - long <7>[ 55.639183] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 55.639837] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 55.759746] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.759726] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.759726] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.809403] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 55.809931] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on <7>[ 55.810350] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 55.812534] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 55.813808] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 55.814722] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 55.816013] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 55.817315] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 55.818618] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 55.819121] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 55.820800] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 55.821290] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 55.822284] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 55.823028] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 55.823492] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 55.824050] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 192000 <7>[ 55.840072] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 55.842307] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:211:eDP-1] <7>[ 55.842965] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:89:pipe A] <7>[ 55.844694] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 55.846451] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 55.848062] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <6>[ 55.848946] Console: switching to colour frame buffer device 180x56 <7>[ 55.848748] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:211:eDP-1] set backlight level = 13892 <6>[ 55.884393] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 55.884497] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 55.885350] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 55.885782] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 55.886176] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 55.886529] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 55.886855] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 55.887181] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 55.887482] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 55.887766] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 55.888072] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 55.888347] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 55.888598] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 55.888836] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 55.889081] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 55.889315] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 55.889537] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 55.889747] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 55.889962] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 55.890163] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 55.890361] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 55.890547] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 55.890727] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 55.891072] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.891100] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.891730] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 55.891750] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 55.891864] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 55.892100] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 55.892329] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 55.892530] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 55.892712] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 55.893694] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.894075] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.894224] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.894330] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.894366] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.894730] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.895191] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.895203] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.895210] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.895213] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.895219] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.895225] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.895229] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 55.895625] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.895628] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 55.895630] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.895805] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.895841] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 55.896174] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.896373] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.897834] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.897836] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.897837] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.897913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 55.897924] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.897928] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.897932] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 55.897935] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 55.898139] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.898294] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 55.898297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 55.898299] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 55.898564] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 55.898629] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.899016] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 55.899024] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 55.899031] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 55.899399] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 55.899523] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 55.899525] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 55.899528] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 55.899530] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 55.899532] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 55.899893] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.899915] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 55.899917] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.899952] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.903245] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.903649] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.907021] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.940119] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 55.940168] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 55.941510] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 55.941546] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 55.941953] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.942693] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.943354] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.944779] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.945709] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 55.946390] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.946911] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 55.947945] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.947970] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.947980] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.947986] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.948000] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.948010] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.948019] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 55.948052] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.948060] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 55.948071] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.948156] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 55.948667] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 55.949201] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 55.950580] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.950589] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.950596] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.950828] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 55.950854] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.950867] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.950913] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 55.950930] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 55.951553] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 55.951565] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 55.951573] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 55.952094] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 55.952104] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 55.952112] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 55.952570] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 55.952578] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 55.952586] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 55.952593] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 55.952599] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 55.952850] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 55.952912] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 55.952919] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 55.953001] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 55.955545] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.955862] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.958206] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 55.975925] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 55.976308] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 55.976660] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.979259] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 55.980482] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 55.990794] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 55.991287] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 55.992066] [IGT] xe_module_load: exiting, ret=0 <7>[ 56.022733] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 56.025014] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 56.025454] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 56.025923] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 56.975101] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.975183] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.975256] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.512685] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD off <7>[ 58.513195] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067