<5>[ 0.000000] Linux version 6.18.0-rc1-lgci-xe-xe-3921-c6c2a6f0013cf24b1+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Oct 14 18:04:09 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f6c018 ESRT=0x68f7da98 MOKvar=0x6cd0c000 <6>[ 0.000000] efi: Remove mem279: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem281: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D96.2504232223 04/23/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000387] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000388] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004884] esrt: Reserving ESRT space from 0x0000000068f7da98 to 0x0000000068f7dbe8. <7>[ 0.004892] e820: update [mem 0x68f7d000-0x68f7dfff] usable ==> reserved <6>[ 0.004911] Using GB pages for direct mapping <6>[ 0.005566] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005567] printk: early log buf free: 258816(98%) <6>[ 0.005568] Secure boot disabled <6>[ 0.005569] ACPI: Early table checksum verification disabled <6>[ 0.005572] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005575] ACPI: XSDT 0x000000006FF70228 00019C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005579] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005581] ACPI: DSDT 0x000000006FFB6000 025547 (v02 INTEL LNL 00000002 01000013) <6>[ 0.005583] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005585] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005586] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005588] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005589] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005590] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005592] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005593] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005594] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005596] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005597] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005598] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005600] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005601] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005602] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005604] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005605] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005606] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005608] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005609] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005610] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005611] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005613] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005614] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005615] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005617] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005618] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005619] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005621] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005622] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005623] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005625] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005626] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005627] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005628] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005630] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005631] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005632] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005634] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005635] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005636] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005638] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005639] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005640] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005642] ACPI: ASF! 0x000000006FF61000 000074 (v32 INTEL LNL 00000002 01000013) <6>[ 0.005643] ACPI: PHAT 0x000000006FF60000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005644] ACPI: BGRT 0x000000006FF5F000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005645] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005646] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb546] <6>[ 0.005647] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005647] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005647] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005648] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005648] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005648] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005649] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005649] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005649] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005649] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005650] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005650] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005650] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005650] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005651] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005651] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005651] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005652] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005652] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005652] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005653] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005653] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005653] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005654] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005654] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005654] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005654] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005655] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005655] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005655] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005656] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005656] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005656] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005657] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005657] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005658] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005658] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005659] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005659] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005659] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005660] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005660] ACPI: Reserving ASF! table memory at [mem 0x6ff61000-0x6ff61073] <6>[ 0.005660] ACPI: Reserving PHAT table memory at [mem 0x6ff60000-0x6ff607bf] <6>[ 0.005661] ACPI: Reserving BGRT table memory at [mem 0x6ff5f000-0x6ff5f037] <6>[ 0.005739] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005949] No NUMA configuration found <6>[ 0.005950] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005955] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006075] Zone ranges: <6>[ 0.006075] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006076] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006077] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006078] Device empty <6>[ 0.006078] Movable zone start for each node <6>[ 0.006079] Early memory node ranges <6>[ 0.006079] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006080] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006080] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006081] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006082] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006086] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006101] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007705] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035595] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035603] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036080] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.036087] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036136] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036137] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036139] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036141] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036142] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036153] e820: update [mem 0x68f28000-0x68f42fff] usable ==> reserved <6>[ 0.036159] TSC deadline timer available <6>[ 0.036161] CPU topo: Max. logical packages: 1 <6>[ 0.036161] CPU topo: Max. logical dies: 1 <6>[ 0.036161] CPU topo: Max. dies per package: 1 <6>[ 0.036163] CPU topo: Max. threads per core: 1 <6>[ 0.036164] CPU topo: Num. cores per package: 8 <6>[ 0.036164] CPU topo: Num. threads per package: 8 <6>[ 0.036164] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036177] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036178] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036179] PM: hibernation: Registered nosave memory: [mem 0x68f28000-0x68f42fff] <6>[ 0.036180] PM: hibernation: Registered nosave memory: [mem 0x68f7d000-0x68f7dfff] <6>[ 0.036181] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036182] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036183] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036184] Booting paravirtualized kernel on bare hardware <6>[ 0.036185] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036194] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036521] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.036525] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036526] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036540] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036627] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036644] random: crng init done <6>[ 0.038505] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039425] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039485] software IO TLB: area num 8. <6>[ 0.046846] Fallback order for Node 0: 0 <6>[ 0.046849] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046850] Policy zone: Normal <6>[ 0.046859] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046859] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046862] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047777] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079729] ********************************************************** <4>[ 0.079730] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079731] ** ** <4>[ 0.079731] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079731] ** via the console, logs, and other interfaces. This ** <4>[ 0.079731] ** might reduce the security of your system. ** <4>[ 0.079732] ** ** <4>[ 0.079732] ** If you see this message and you are not debugging ** <4>[ 0.079732] ** the kernel, report this immediately to your system ** <4>[ 0.079732] ** administrator! ** <4>[ 0.079732] ** ** <4>[ 0.079733] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079733] ** ** <4>[ 0.079733] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079733] ********************************************************** <6>[ 0.080843] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089039] ftrace: allocating 60589 entries in 240 pages <6>[ 0.089040] ftrace: allocated 240 pages with 4 groups <6>[ 0.090454] Dynamic Preempt: voluntary <6>[ 0.090955] Running RCU self tests <6>[ 0.090956] Running RCU synchronous self tests <6>[ 0.090956] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090957] rcu: RCU lockdep checking is enabled. <6>[ 0.090957] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090958] Trampoline variant of Tasks RCU enabled. <6>[ 0.090958] Rude variant of Tasks RCU enabled. <6>[ 0.090958] Tracing variant of Tasks RCU enabled. <6>[ 0.090959] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090959] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091026] Running RCU synchronous self tests <6>[ 0.091031] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091034] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091036] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101613] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102083] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102499] Console: colour dummy device 80x25 <6>[ 0.102508] printk: legacy console [tty0] enabled <6>[ 0.103672] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103680] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103684] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103687] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103691] ... CLASSHASH_SIZE: 4096 <6>[ 0.103694] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103698] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103702] ... CHAINHASH_SIZE: 262144 <6>[ 0.103705] memory used by lock dependency info: 54145 kB <6>[ 0.103710] memory used for stack traces: 4224 kB <6>[ 0.103714] per task-struct memory footprint: 1920 bytes <6>[ 0.103764] ACPI: Core revision 20250807 <6>[ 0.104657] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104720] APIC: Switch to symmetric I/O mode setup <6>[ 0.104726] DMAR: Host address width 38 <6>[ 0.104730] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104758] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104787] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104811] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104837] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104858] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104891] DMAR: SATC flags: 0x1 <6>[ 0.104901] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104906] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104911] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.106964] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111993] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112012] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112088] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112094] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112273] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112277] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112287] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112298] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112305] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112310] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.112314] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112322] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112338] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112344] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112349] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112353] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112360] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112365] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112372] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112377] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112382] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112387] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112391] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113006] Freeing SMP alternatives memory: 56K <6>[ 0.113006] pid_max: default: 32768 minimum: 301 <6>[ 0.113006] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.113006] landlock: Up and running. <6>[ 0.113006] Yama: becoming mindful. <6>[ 0.113006] AppArmor: AppArmor initialized <6>[ 0.113006] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113006] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113006] Running RCU synchronous self tests <6>[ 0.113006] Running RCU synchronous self tests <6>[ 0.113006] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113006] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113006] core: cpu_core PMU driver: <6>[ 0.113006] ... version: 6 <6>[ 0.113006] ... bit width: 48 <6>[ 0.113006] ... generic counters: 10 <6>[ 0.113006] ... generic bitmap: 00000000000003ff <6>[ 0.113006] ... fixed-purpose counters: 4 <6>[ 0.113006] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.113006] ... value mask: 0000ffffffffffff <6>[ 0.113006] ... max period: 00007fffffffffff <6>[ 0.113011] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113085] signal: max sigframe size: 3632 <6>[ 0.113110] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113212] rcu: Hierarchical SRCU implementation. <6>[ 0.113217] rcu: Max phase no-delay instances is 400. <6>[ 0.113358] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115181] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115443] smp: Bringing up secondary CPUs ... <6>[ 0.115798] smpboot: x86: Booting SMP configuration: <6>[ 0.115805] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010739] core: cpu_atom PMU driver: <6>[ 0.010739] ... version: 6 <6>[ 0.010739] ... bit width: 48 <6>[ 0.010739] ... generic counters: 8 <6>[ 0.010739] ... generic bitmap: 00000000000000ff <6>[ 0.010739] ... fixed-purpose counters: 6 <6>[ 0.010739] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010739] ... value mask: 0000ffffffffffff <6>[ 0.010739] ... max period: 00007fffffffffff <6>[ 0.010739] ... global_ctrl mask: 00000077000000ff <6>[ 0.125020] smp: Brought up 1 node, 8 CPUs <6>[ 0.125377] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.127179] Memory: 32358428K/33158528K available (25413K kernel code, 5651K rwdata, 9540K rodata, 5704K init, 68232K bss, 777192K reserved, 0K cma-reserved) <6>[ 0.128248] devtmpfs: initialized <6>[ 0.128324] x86/mm: Memory block size: 128MB <6>[ 0.149369] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.150191] Running RCU synchronous self tests <6>[ 0.150205] Running RCU synchronous self tests <6>[ 0.151111] Running RCU Tasks wait API self tests <6>[ 0.151310] Running RCU Tasks Rude wait API self tests <6>[ 0.151310] Running RCU Tasks Trace wait API self tests <6>[ 0.165075] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.165308] posixtimers hash table entries: 4096 (order: 6, 294912 bytes, linear) <6>[ 0.165390] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.166179] pinctrl core: initialized pinctrl subsystem <6>[ 0.166923] PM: RTC time: 05:05:26, date: 2025-10-15 <6>[ 0.167734] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.168930] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.169267] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.169569] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.169638] audit: initializing netlink subsys (disabled) <5>[ 0.169681] audit: type=2000 audit(1760504726.057:1): state=initialized audit_enabled=0 res=1 <6>[ 0.170747] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.170750] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.170757] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.170764] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.170770] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.170816] cpuidle: using governor ladder <6>[ 0.170816] cpuidle: using governor menu <6>[ 0.171087] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.171622] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.171654] PCI: Using configuration type 1 for base access <6>[ 0.172015] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.173425] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.173425] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.173425] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.173425] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.178103] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.178109] raid6: using avx2x2 recovery algorithm <6>[ 0.178574] fbcon: Taking over console <6>[ 0.178795] ACPI: Added _OSI(Module Device) <6>[ 0.178804] ACPI: Added _OSI(Processor Device) <6>[ 0.178813] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.184042] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.873246] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.894974] ACPI: EC: EC started <6>[ 0.895005] ACPI: EC: interrupt blocked <6>[ 0.897751] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.897761] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.014038] Callback from call_rcu_tasks() invoked. <6>[ 1.197370] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.197385] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.225274] ACPI: Interpreter enabled <6>[ 1.225370] ACPI: PM: (supports S0 S4 S5) <6>[ 1.225375] ACPI: Using IOAPIC for interrupt routing <6>[ 1.231346] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.231354] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.250007] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.250057] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.356450] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.357539] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.366495] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.732808] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.748681] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.891453] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.893346] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.901508] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.923010] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.923788] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.924553] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.232724] ACPI: \_TZ_.FN00: New power resource <6>[ 2.233678] ACPI: \_TZ_.FN01: New power resource <6>[ 2.234925] ACPI: \_TZ_.FN02: New power resource <6>[ 2.235773] ACPI: \_TZ_.FN03: New power resource <6>[ 2.236615] ACPI: \_TZ_.FN04: New power resource <6>[ 2.239383] ACPI: \PIN_: New power resource <6>[ 2.245448] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.245476] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.250890] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.265944] PCI host bridge to bus 0000:00 <6>[ 2.266006] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.266020] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.266033] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.266046] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.266059] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.266076] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.270808] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.271824] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.271919] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.271932] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.271945] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.272002] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.274483] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.274516] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.276780] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.276814] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.276826] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.278222] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.278263] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.278278] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.278298] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.278416] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.278512] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.285697] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.285741] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.285756] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.285777] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.285899] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.285983] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.293043] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.293087] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.293102] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.293122] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.293241] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.293327] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.299538] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.299580] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.299598] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.299950] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.299983] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.299994] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.300691] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.300747] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.300825] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.304213] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.304269] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.304282] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.304351] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.304358] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.306483] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.306539] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.306551] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.306618] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.306624] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.309050] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.309108] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.309183] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.313087] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.313178] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.313283] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.314002] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.314051] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.314127] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.317517] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.317584] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.317597] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.318048] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.318159] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.332064] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.332181] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.345290] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.345407] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.359912] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.360016] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.378575] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.378697] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.378838] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.383939] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.384018] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027] <6>[ 2.384028] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff] <6>[ 2.384425] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.384461] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.384473] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.384485] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.384621] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.384718] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.392359] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.392453] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.392492] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.392808] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.393024] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.401008] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.403436] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.403558] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.403577] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.403703] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.404834] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.404905] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.404921] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.406835] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.406954] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.407313] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.407397] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff] <6>[ 2.407496] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.410232] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.410481] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.410727] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.410996] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.411070] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.411084] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.411097] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.411291] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.411298] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.412297] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.415328] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.415837] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.415890] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.416122] pci 0000:80:00.0: 15.753 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x1 link at 0000:00:1c.4 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) <6>[ 2.418018] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.418018] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.829100] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 12.734840] Low-power S0 idle used by default for system suspend <6>[ 12.787648] ACPI: EC: interrupt unblocked <6>[ 12.787659] ACPI: EC: event unblocked <6>[ 12.787696] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 12.787703] ACPI: EC: GPE=0x6e <6>[ 12.787708] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 12.787717] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 12.788323] iommu: Default domain type: Translated <6>[ 12.788323] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 12.792625] SCSI subsystem initialized <7>[ 12.793068] libata version 3.00 loaded. <6>[ 12.793191] ACPI: bus type USB registered <6>[ 12.793298] usbcore: registered new interface driver usbfs <6>[ 12.793350] usbcore: registered new interface driver hub <6>[ 12.793632] usbcore: registered new device driver usb <6>[ 12.793787] pps_core: LinuxPPS API ver. 1 registered <6>[ 12.793791] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 12.793812] PTP clock support registered <6>[ 12.794128] EDAC MC: Ver: 3.0.0 <6>[ 12.798322] efivars: Registered efivars operations <6>[ 12.804390] NetLabel: Initializing <6>[ 12.804401] NetLabel: domain hash size = 128 <6>[ 12.804411] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 12.804572] NetLabel: unlabeled traffic allowed by default <6>[ 12.804609] mctp: management component transport protocol core <6>[ 12.804622] NET: Registered PF_MCTP protocol family <6>[ 12.804724] PCI: Using ACPI for IRQ routing <7>[ 12.866695] PCI: pci_cache_line_size set to 64 bytes <6>[ 12.866988] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 12.867162] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 12.867187] e820: reserve RAM buffer [mem 0x68f28000-0x6bffffff] <7>[ 12.867197] e820: reserve RAM buffer [mem 0x68f7d000-0x6bffffff] <7>[ 12.867205] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 12.867214] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 12.868665] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 12.868665] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 12.868665] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 12.868665] vgaarb: loaded <7>[ 12.873340] Monitor-Mwait will be used to enter C-1 state <7>[ 12.873365] Monitor-Mwait will be used to enter C-2 state <7>[ 12.873365] Monitor-Mwait will be used to enter C-3 state <6>[ 12.883020] clocksource: Switched to clocksource tsc-early <5>[ 12.895013] VFS: Disk quotas dquot_6.6.0 <6>[ 12.895079] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 12.898764] AppArmor: AppArmor Filesystem Enabled <6>[ 12.899258] pnp: PnP ACPI init <6>[ 12.901644] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 12.901675] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 12.905575] system 00:02: [io 0x06a4] has been reserved <6>[ 12.905600] system 00:02: [io 0x06a0] has been reserved <6>[ 12.965477] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 12.965506] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 12.965537] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 12.965560] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 12.965584] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 12.965610] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 12.965636] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 12.965659] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 12.980211] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 12.984953] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 12.985377] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 12.994391] pnp: PnP ACPI: found 8 devices <6>[ 13.010712] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 13.011055] NET: Registered PF_INET protocol family <6>[ 13.011306] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.014863] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 13.015194] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 13.015516] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.016732] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 13.018832] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 13.019487] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.021150] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.022861] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 13.022961] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 13.022980] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 13.022994] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 13.023068] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned <6>[ 13.023078] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned <6>[ 13.023087] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned <6>[ 13.023098] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 13.023130] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 13.023156] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 13.023181] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 13.023207] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 13.023250] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 13.023264] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] <6>[ 13.023276] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 13.023288] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.023303] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 13.023316] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff] <6>[ 13.023328] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 13.023340] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.023355] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 13.023364] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff] <6>[ 13.023375] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 13.023387] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.023403] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 13.023411] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 13.023422] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 13.023437] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 13.023473] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 13.023518] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 13.023526] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 13.023534] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 13.023543] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 13.023552] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 13.023562] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] <6>[ 13.023569] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 13.023578] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.023588] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff] <6>[ 13.023595] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 13.023603] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.023614] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff] <6>[ 13.023621] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 13.023629] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.023640] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 13.023647] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 13.023656] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 13.025066] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 13.027261] PCI: CLS 0 bytes, default 64 <6>[ 13.027414] DMAR: No RMRR found <6>[ 13.027429] DMAR: No ATSR found <6>[ 13.027435] DMAR: dmar1: Using Queued invalidation <6>[ 13.027446] DMAR: dmar0: Using Queued invalidation <6>[ 13.027455] DMAR: dmar2: Using Queued invalidation <6>[ 13.028700] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 13.028823] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 13.028929] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 13.029018] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 13.034096] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 13.036179] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 13.036284] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 13.036380] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 13.036482] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 13.036599] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 13.036661] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 13.036724] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 13.036836] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 13.036931] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 13.037038] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 13.037101] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 13.037228] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 13.037294] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 13.037355] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 13.037420] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 13.037536] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 13.037597] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 13.037684] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 13.037815] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 13.037948] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 13.038012] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 13.038076] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 13.038140] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 13.038204] pci 0000:00:1f.6: Adding to iommu group 17 <6>[ 13.038293] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 13.038403] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 13.050644] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 13.050738] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 13.051052] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 13.057904] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 13.058255] clocksource: Switched to clocksource tsc <6>[ 13.058526] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 13.069553] Initialise system trusted keyrings <5>[ 13.069683] Key type blacklist registered <6>[ 13.070385] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 13.085685] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 13.085841] ntfs3: Enabled Linux POSIX ACLs support <6>[ 13.085849] ntfs3: Read-only LZX/Xpress compression included <5>[ 13.086526] integrity: Platform Keyring initialized <5>[ 13.086552] integrity: Machine keyring initialized <6>[ 13.093676] xor: automatically using best checksumming function avx <5>[ 13.093688] Key type asymmetric registered <5>[ 13.093702] Asymmetric key parser 'x509' registered <6>[ 13.093855] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 13.094760] io scheduler mq-deadline registered <6>[ 13.096297] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 13.101072] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 13.101505] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 13.102834] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 13.103371] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 13.105320] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 13.105695] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 13.106857] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 13.107177] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 13.108797] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 13.109356] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 13.112115] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 13.112338] ACPI: button: Lid Switch [LID0] <6>[ 13.112635] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 13.113045] ACPI: button: Sleep Button [SLPB] <6>[ 13.113313] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 13.113800] ACPI: button: Power Button [PWRB] <6>[ 13.287621] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 13.287641] ACPI: thermal: Thermal Zone [TZ00] (55 C) <6>[ 13.288918] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 13.289364] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 13.290445] ACPI: battery: Slot [BAT0] (battery present) <6>[ 13.312433] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 13.329334] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 13.331145] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 13.354074] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 13.356453] hpet_acpi_add: no address or irqs in _CRS <6>[ 13.356711] Linux agpgart interface v0.103 <6>[ 13.357724] ACPI: bus type drm_connector registered <7>[ 13.358878] initcall simpledrm_platform_driver_init blacklisted <6>[ 13.383674] loop: module loaded <6>[ 13.448680] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 13.579519] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 13.728905] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 13.841681] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 14.053031] Key type psk registered <6>[ 14.058229] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 14.059797] nvme nvme0: pci function 0000:80:00.0 <6>[ 14.060607] tun: Universal TUN/TAP device driver, 1.6 <6>[ 14.063978] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.064171] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 14.067424] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.070642] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.070682] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 14.070720] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.071327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 14.071373] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.071391] usb usb1: Product: xHCI Host Controller <6>[ 14.071404] usb usb1: Manufacturer: Linux 6.18.0-rc1-lgci-xe-xe-3921-c6c2a6f0013cf24b1+ xhci-hcd <6>[ 14.071426] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 14.074966] hub 1-0:1.0: USB hub found <6>[ 14.075111] hub 1-0:1.0: 1 port detected <6>[ 14.082173] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 14.082198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.082216] usb usb2: Product: xHCI Host Controller <6>[ 14.082228] usb usb2: Manufacturer: Linux 6.18.0-rc1-lgci-xe-xe-3921-c6c2a6f0013cf24b1+ xhci-hcd <6>[ 14.082248] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 14.084957] hub 2-0:1.0: USB hub found <6>[ 14.085055] hub 2-0:1.0: 3 ports detected <6>[ 14.105664] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 14.121027] nvme0n1: p1 p2 <6>[ 14.127521] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.127544] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 14.129091] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.130374] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.130389] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 14.130402] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.130539] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 14.130547] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.130553] usb usb3: Product: xHCI Host Controller <6>[ 14.130557] usb usb3: Manufacturer: Linux 6.18.0-rc1-lgci-xe-xe-3921-c6c2a6f0013cf24b1+ xhci-hcd <6>[ 14.130564] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 14.131505] hub 3-0:1.0: USB hub found <6>[ 14.131540] hub 3-0:1.0: 8 ports detected <6>[ 14.148990] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 14.149000] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.149006] usb usb4: Product: xHCI Host Controller <6>[ 14.149010] usb usb4: Manufacturer: Linux 6.18.0-rc1-lgci-xe-xe-3921-c6c2a6f0013cf24b1+ xhci-hcd <6>[ 14.149017] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 14.149931] hub 4-0:1.0: USB hub found <6>[ 14.149960] hub 4-0:1.0: 2 ports detected <6>[ 14.155227] usbcore: registered new interface driver usb-storage <6>[ 14.155350] usbcore: registered new interface driver usbserial_generic <6>[ 14.155408] usbserial: USB Serial support registered for generic <6>[ 14.155454] usbcore: registered new interface driver ftdi_sio <6>[ 14.155485] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 14.155533] usbcore: registered new interface driver pl2303 <6>[ 14.155556] usbserial: USB Serial support registered for pl2303 <6>[ 14.155641] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 14.155647] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 14.867857] i8042: Can't read CTR while initializing i8042 <3>[ 14.867863] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 14.870374] mousedev: PS/2 mouse device common for all mice <6>[ 14.873468] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 14.876588] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 14.876877] rtc_cmos rtc_cmos: setting system clock to 2025-10-15T05:05:41 UTC (1760504741) <6>[ 14.877249] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 14.877357] i2c_dev: i2c /dev entries driver <6>[ 14.885110] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 14.885140] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 14.885165] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 14.885245] device-mapper: uevent: version 1.0.3 <6>[ 14.886275] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 14.886307] intel_pstate: Intel P-state driver initializing <6>[ 14.890433] Hybrid CPU capacity scaling enabled <6>[ 14.890815] processor cpu0: EM: created perf domain <6>[ 14.891122] processor cpu1: EM: created perf domain <6>[ 14.891424] processor cpu2: EM: created perf domain <6>[ 14.891723] processor cpu3: EM: created perf domain <6>[ 14.892013] processor cpu4: EM: created perf domain <6>[ 14.892279] processor cpu5: EM: created perf domain <6>[ 14.892535] processor cpu6: EM: created perf domain <6>[ 14.892794] processor cpu7: EM: created perf domain <6>[ 14.893784] intel_pstate: HWP enabled <6>[ 14.893792] sdhci: Secure Digital Host Controller Interface driver <6>[ 14.893798] sdhci: Copyright(c) Pierre Ossman <6>[ 14.893949] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 14.896491] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 14.897258] drop_monitor: Initializing network drop monitor service <6>[ 14.897440] NET: Registered PF_INET6 protocol family <6>[ 14.898451] Segment Routing with IPv6 <6>[ 14.898486] In-situ OAM (IOAM) with IPv6 <6>[ 14.898526] NET: Registered PF_PACKET protocol family <5>[ 14.898697] Key type dns_resolver registered <4>[ 14.902736] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 14.903078] microcode: Current revision: 0x00000121 <6>[ 14.903822] IPI shorthand broadcast: enabled <6>[ 14.917284] sched_clock: Marking stable (14907000692, 9739495)->(15003053956, -86313769) <6>[ 14.918536] registered taskstats version 1 <5>[ 14.919705] Loading compiled-in X.509 certificates <6>[ 14.962711] Demotion targets for Node 0: null <6>[ 14.962977] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 14.962981] kmemleak: Automatic memory scanning thread started <5>[ 14.963226] Key type .fscrypt registered <5>[ 14.963232] Key type fscrypt-provisioning registered <6>[ 14.966085] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 14.968568] Key type encrypted registered <6>[ 14.968574] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 14.968781] ima: No TPM chip found, activating TPM-bypass! <5>[ 14.968794] Loading compiled-in module X.509 certificates <5>[ 14.969473] Loaded X.509 cert 'Build time autogenerated kernel key: ec73d7a1eb01c419660286fde26fcf0a574f7d79' <6>[ 14.969485] ima: Allocated hash algorithm: sha256 <6>[ 14.969531] ima: No architecture policies found <6>[ 14.969614] evm: Initialising EVM extended attributes: <6>[ 14.969619] evm: security.selinux <6>[ 14.969622] evm: security.SMACK64 <6>[ 14.969624] evm: security.SMACK64EXEC <6>[ 14.969628] evm: security.SMACK64TRANSMUTE <6>[ 14.969631] evm: security.SMACK64MMAP <6>[ 14.969634] evm: security.apparmor <6>[ 14.969636] evm: security.ima <6>[ 14.969639] evm: security.capability <6>[ 14.969642] evm: HMAC attrs: 0x1 <6>[ 14.971633] PM: Magic number: 13:193:62 <6>[ 14.971719] acpi EEP5004:00: hash matches <6>[ 14.971767] memory memory223: hash matches <6>[ 14.971785] memory memory90: hash matches <6>[ 14.971837] netconsole: network logging started <6>[ 14.972454] RAS: Correctable Errors collector initialized. <6>[ 14.972580] clk: Disabling unused clocks <6>[ 14.972589] PM: genpd: Disabling unused power domains <4>[ 14.973348] check access for rdinit=/init failed: -2, ignoring <6>[ 14.973355] md: Waiting for all devices to be available before autodetect <6>[ 14.973360] md: If you don't use raid, use raid=noautodetect <6>[ 14.973365] md: Autodetecting RAID arrays. <6>[ 14.973372] md: autorun ... <6>[ 14.973374] md: ... autorun DONE. <6>[ 15.015578] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none. <6>[ 15.015644] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 15.016125] devtmpfs: mounted <6>[ 15.031921] Freeing unused decrypted memory: 2036K <6>[ 15.032820] Freeing unused kernel image (initmem) memory: 5704K <6>[ 15.032842] Write protecting the kernel read-only data: 36864k <6>[ 15.033649] Freeing unused kernel image (text/rodata gap) memory: 1208K <6>[ 15.033999] Freeing unused kernel image (rodata/data gap) memory: 700K <6>[ 15.038561] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 15.039169] Run /sbin/init as init process <7>[ 15.039173] with arguments: <7>[ 15.039174] /sbin/init <7>[ 15.039175] with environment: <7>[ 15.039176] HOME=/ <7>[ 15.039176] TERM=linux <7>[ 15.088702] systemd[1]: Inserted module 'autofs4' <7>[ 15.120298] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 15.120349] systemd[1]: Detected architecture x86-64. <7>[ 15.122233] systemd[1]: Hostname set to . <7>[ 15.365396] systemd[1]: Queued start job for default target graphical.target. <7>[ 15.394952] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 15.396972] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 15.398438] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 15.398685] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 15.399351] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 15.399474] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC... <7>[ 15.399562] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 15.399647] systemd[1]: Reached target slices.target - Slice Units. <7>[ 15.399721] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 15.399802] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 15.399883] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 15.400136] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 15.400511] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 15.400901] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 15.401221] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 15.401470] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 15.401667] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 15.401969] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 15.402281] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 15.402557] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 15.402726] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.403030] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 15.403292] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 15.411973] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 15.414754] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 15.417273] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 15.420150] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 15.426755] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 15.430038] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 15.433439] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 15.436604] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 15.439591] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 15.442271] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 15.445681] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 15.449527] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 15.453718] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 15.457690] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 15.458682] systemd-journald[206]: Collecting audit messages is disabled. <7>[ 15.462184] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 15.462397] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 15.470670] pstore: Using crash dump compression: deflate <7>[ 15.471315] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 15.474896] pstore: Registered efi_pstore as persistent store backend <7>[ 15.476416] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 15.476520] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.476591] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 15.480615] fuse: init (API version 7.45) <7>[ 15.480690] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 15.486248] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 15.621362] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. <6>[ 15.650658] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:411435008k SS <7>[ 15.664650] systemd-journald[206]: Received client request to flush runtime journal. <7>[ 15.678162] systemd-journald[206]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 15.678173] systemd-journald[206]: Rotating system journal. <4>[ 16.417719] nvme nvme0: using unchecked data buffer <6>[ 16.531285] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 16.570896] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 16.591359] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 16.595869] intel-hid INTC107B:00: platform supports 5 button array <6>[ 16.604722] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <3>[ 16.697562] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 16.698041] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <5>[ 16.767763] audit: type=1400 audit(1760504743.388:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=424 comm="apparmor_parser" <5>[ 16.768673] audit: type=1400 audit(1760504743.389:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=426 comm="apparmor_parser" <5>[ 16.769192] audit: type=1400 audit(1760504743.390:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=423 comm="apparmor_parser" <5>[ 16.770341] audit: type=1400 audit(1760504743.391:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=427 comm="apparmor_parser" <5>[ 16.771345] audit: type=1400 audit(1760504743.391:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=422 comm="apparmor_parser" <5>[ 16.778507] audit: type=1400 audit(1760504743.399:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=428 comm="apparmor_parser" <5>[ 16.779180] audit: type=1400 audit(1760504743.400:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=425 comm="apparmor_parser" <5>[ 16.780945] audit: type=1400 audit(1760504743.401:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=433 comm="apparmor_parser" <5>[ 16.783013] audit: type=1400 audit(1760504743.404:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=431 comm="apparmor_parser" <5>[ 16.785734] audit: type=1400 audit(1760504743.406:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="vscode" pid=435 comm="apparmor_parser" <6>[ 16.978660] pci 0000:00:05.0: Setting to D3hot <6>[ 16.990800] pci 0000:00:0b.0: Setting to D3hot <6>[ 17.004053] intel_pmc_core INT33A1:00: initialized <6>[ 17.127691] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 17.128935] ACPI: bus type thunderbolt registered <6>[ 17.143397] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 17.143405] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 17.180084] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 17.186314] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 17.206063] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 17.213175] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 17.213179] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 17.215531] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) <6>[ 17.218055] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 17.218876] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 17.238408] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 17.275338] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 17.341485] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 17.345662] intel_rapl_common: Found RAPL domain package <6>[ 17.345667] intel_rapl_common: Found RAPL domain dram <6>[ 17.347362] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 176 <6>[ 17.347370] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 17.373975] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer <6>[ 17.373980] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 17.373981] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 17.373982] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 17.373983] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 17.373984] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 17.383369] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 17.448786] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 17.449363] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.475010] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 17.589949] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.592245] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:90 <6>[ 17.592251] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 17.592371] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 17.592548] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 17.595700] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.605165] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.621097] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 17.621105] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 17.621107] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <4>[ 17.626699] block nvme0n1: No UUID available providing old NGUID <6>[ 17.733499] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.867104] evm: overlay not supported <6>[ 17.875597] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 17.893943] intel_rapl_common: Found RAPL domain package <6>[ 17.893948] intel_rapl_common: Found RAPL domain core <6>[ 17.893951] intel_rapl_common: Found RAPL domain uncore <6>[ 17.893953] intel_rapl_common: Found RAPL domain dram <6>[ 17.893955] intel_rapl_common: Found RAPL domain psys <6>[ 17.994158] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.114183] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 18.160152] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1 <6>[ 18.194011] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.225501] loop0: detected capacity change from 0 to 8 <4>[ 18.237488] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 18.251377] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 18.251394] 0x000000000000-0x000002000000 : "BIOS" <6>[ 18.270474] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.293277] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 18.451381] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 18.587603] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.616745] hid: raw HID events driver (C) Jiri Kosina <6>[ 18.628698] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 18.661974] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.670808] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.672463] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.673671] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.675978] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.677045] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.678439] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.679055] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.680854] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.681970] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.682684] Consider using thermal netlink events interface <6>[ 18.686604] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.686987] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.689300] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.690882] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.694153] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.695146] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.699090] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.699160] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.700601] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.701825] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.703873] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.704128] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.707171] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.792488] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.799672] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.804669] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.808173] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.813346] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.818459] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.824116] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.829028] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.833601] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.837327] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.841721] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.846363] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.852278] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.856825] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.861386] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.866135] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.871105] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.876142] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.882527] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.887547] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 23.637473] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 29.265211] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 29.266274] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <3>[ 29.355221] ucsi_acpi USBC000:00: failed to reset PPM! <3>[ 29.355275] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <7>[ 32.394936] systemd-journald[206]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 52.301400] [IGT] xe_module_load: executing <4>[ 52.301447] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.310485] [IGT] xe_module_load: starting subtest load <5>[ 52.565695] Setting dangerous option force_probe - tainting kernel <6>[ 52.568689] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 52.570335] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 52.570345] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 52.570461] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 52.570569] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 52.572423] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 52.572554] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 52.572657] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 52.572775] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 52.572899] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 52.573010] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 52.573115] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 52.573209] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 52.573293] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 52.573393] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 52.573496] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 52.573620] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 52.573733] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 52.573856] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 52.573972] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 52.574089] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 52.574199] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 52.574306] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 52.574408] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 52.574509] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 52.574609] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.574708] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.574819] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 52.574926] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.575034] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.575132] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.575228] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 52.575324] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.575420] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.575516] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.575611] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 52.575706] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.575819] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.575924] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.576026] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 52.576125] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.576223] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.576317] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.576410] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 52.576502] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.576592] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.576679] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.576780] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 52.577223] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 52.577323] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 52.577426] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 52.577526] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 52.577624] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 52.577725] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 52.577839] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 52.577945] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 52.578041] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 52.578132] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 52.578218] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 52.578302] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 52.578385] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 52.578468] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 52.578552] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 52.578634] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 52.578722] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 52.578824] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 52.578923] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.579019] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.579108] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.579195] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 52.579286] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 52.579378] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.579470] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.579551] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.579634] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 52.579750] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.579899] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 52.580052] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.580350] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 52.580524] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 52.580663] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 52.580839] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.580962] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.581106] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 52.581212] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 52.581227] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 52.581343] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 52.581445] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 52.581546] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 52.581757] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 52.582164] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 52.583115] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 52.583251] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 52.583356] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 52.583445] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 52.583533] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 52.583619] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 52.583704] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 52.583799] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 52.583910] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 52.584021] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 52.584124] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 52.584205] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 52.584283] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 52.584360] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 52.585241] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 52.585355] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 52.585465] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 52.585569] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 52.585672] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 52.585779] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 52.585919] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 52.586047] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 52.586165] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.586269] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 52.586363] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.586458] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 52.586559] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.586660] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 52.586772] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 52.586872] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 52.586971] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.587070] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 52.587186] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.587307] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 52.587430] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.587552] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 52.587666] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 52.587770] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 52.587884] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.587996] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 52.588105] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.588214] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 52.588321] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.588428] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 52.590293] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 52.593350] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.593510] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 52.593659] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 52.593950] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 52.594172] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A] <7>[ 52.594392] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 52.594536] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 52.594676] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 52.594834] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 52.594982] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 52.595119] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 52.595255] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 52.595391] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 52.595525] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 52.595729] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 52.595999] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.596125] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.596246] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.596364] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.596479] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.596752] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.597048] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.598520] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.598814] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <6>[ 52.599573] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 52.600244] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 52.600645] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 52.601080] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 52.601620] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 52.601946] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 52.603627] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 52.612751] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 52.612761] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.612763] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.612764] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 52.612766] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.612768] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 52.612773] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.612774] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 52.612777] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.612821] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.612822] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.612823] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.612832] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.613180] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms) <7>[ 52.613523] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 52.613656] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: none <7>[ 52.613815] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 52.613986] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 52.614158] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.614251] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.614340] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.614426] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.614509] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.614624] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.614825] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 52.615054] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.615196] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1] <7>[ 52.615561] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 52.615689] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.615813] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2] <7>[ 52.616106] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 52.616236] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.616353] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3] <7>[ 52.616823] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: enabled <7>[ 52.616975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled <7>[ 52.617108] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled <7>[ 52.617198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 52.617287] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 52.617374] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 52.617460] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 52.617545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 52.617631] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 52.617715] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B <7>[ 52.617817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B <7>[ 52.617926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B <7>[ 52.618033] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B <7>[ 52.618123] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B <7>[ 52.618205] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B <7>[ 52.618287] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C <7>[ 52.618375] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C <7>[ 52.618460] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C <7>[ 52.618546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C <7>[ 52.618631] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C <7>[ 52.618713] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C <7>[ 52.619506] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 52.619619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 52.619705] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.619804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 52.619889] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.619972] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.620053] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.620131] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.620210] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 52.620284] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.620357] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.620432] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.620514] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.620596] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 52.620674] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.620757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.620841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.620946] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: enabled <7>[ 52.621045] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled <7>[ 52.621132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled <7>[ 52.621218] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled <7>[ 52.621370] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 52.621460] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 52.621545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 52.621621] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 52.621695] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 52.621779] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 52.621861] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz <7>[ 52.621940] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz <7>[ 52.622018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz <7>[ 52.622096] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz <7>[ 52.622166] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz <7>[ 52.622235] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz <7>[ 52.622305] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz <7>[ 52.622373] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz <7>[ 52.622442] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz <7>[ 52.622510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz <7>[ 52.622578] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz <7>[ 52.622651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz <7>[ 52.622879] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 52.622969] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.623056] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.623135] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 52.623242] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 52.623347] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 52.623481] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 52.623588] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 52.623826] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [setup_hw_state] <7>[ 52.623956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 52.624081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 52.624182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 52.624280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 52.624376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 52.624471] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 52.624565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 52.624657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 52.624752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 52.624856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 52.624973] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 52.625087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 52.625175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 52.625262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 52.625348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0 set context latency: 1 <7>[ 52.625435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 52.625526] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 52.625618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.625708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.625812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.625911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.626006] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.626099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710 <7>[ 52.626184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 52.626268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 52.626351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 52.626434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 52.626516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 52.626596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 52.626676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 52.626760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.626846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.626932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.627016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.627096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.627176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.627262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.627348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.627433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.627516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.627599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state] <7>[ 52.627681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state] <7>[ 52.627999] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:88:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 52.628089] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:88:pipe A] <6>[ 52.641464] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4 <7>[ 52.645059] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003533f7 <7>[ 52.645175] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 52.645261] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 52.645342] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 52.645420] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d0 <7>[ 52.645495] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 52.645568] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 52.645639] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 52.645708] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 52.645789] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 52.645857] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 52.645922] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 52.645986] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 52.646049] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 52.646113] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 52.646224] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 52.656803] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 52.657721] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 52.658046] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7>[ 52.658168] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7>[ 52.658281] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 52.658392] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 52.658500] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 53.299187] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 53.299191] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 53.299192] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 53.299329] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 53.299454] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.299573] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.299676] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.299818] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 53.299951] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 53.300107] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 53.300211] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.300315] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.300411] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.301635] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 53.301734] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 53.301857] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 53.301975] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 53.302088] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 53.302182] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 53.302273] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 53.302364] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 53.302452] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 53.302537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.302624] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.302710] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.302802] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.302901] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.303000] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.303095] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.303176] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.303257] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.303337] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.303417] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.303497] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.303577] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.303656] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.303737] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.303838] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.303935] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 53.304036] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 53.304130] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.304213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.304295] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 53.304374] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 53.304453] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 53.304532] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 53.304612] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 53.304690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 53.304775] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.304855] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.304939] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 53.305025] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.305114] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.305476] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 53.305565] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 53.305643] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.305718] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.306083] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 53.306160] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.306235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.306308] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.306621] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 53.306693] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 53.306771] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.306841] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.306911] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.306983] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.307056] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.307486] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 53.307620] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003533f7 <7>[ 53.307700] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 53.307788] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 53.307866] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 53.307942] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d0 <7>[ 53.308017] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.308093] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 53.308165] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 53.308238] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 53.308310] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 53.308383] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 53.308455] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 53.308526] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 53.308595] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 53.308685] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 53.308861] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 53.310012] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd18000 for xe_guc_init_post_hwconfig [xe] <7>[ 53.313387] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 53.332261] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 53.342800] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 53.343229] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 53.344306] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 53.344530] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 53.344681] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 53.344840] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 53.344985] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 53.345126] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 53.345262] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 53.345398] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 53.345540] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 53.348974] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.349155] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.349293] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.352519] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.352635] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.355980] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4 <7>[ 53.360391] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df43f7 <7>[ 53.360607] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.360879] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 53.361103] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.361291] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e12 <7>[ 53.361463] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.361626] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.361790] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.361942] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.362086] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.362226] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.362383] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.362536] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.362662] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 53.364478] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.367007] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.368135] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.368253] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.368414] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 53.389789] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.390430] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.390842] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 53.391198] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 53.391514] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 53.391837] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 53.392143] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 53.392428] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 53.392432] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 53.392435] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 53.392438] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 53.392441] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 53.392443] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 53.392446] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 53.392449] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 53.392452] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 53.392454] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 53.392590] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 53.393103] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 53.393560] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 53.395858] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 53.396118] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 53.396375] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 53.396617] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 53.396867] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 53.397092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 53.397303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 53.397542] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 53.397736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 53.397952] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 53.398142] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 53.398334] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 53.398526] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.398705] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.398890] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.399085] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.399264] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.399428] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.399585] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.399735] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.399899] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.400038] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.400171] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.400300] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.400447] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.400582] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.400700] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.400828] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.400942] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 53.401069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 53.401196] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 53.401738] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 53.401896] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 53.402020] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 53.402434] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 53.402548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 53.402657] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 53.403206] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 53.403347] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df43f7 <7>[ 53.403446] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 53.403542] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 53.403633] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 53.403722] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e12 <7>[ 53.403818] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.403904] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 53.403987] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 53.404067] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 53.404145] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 53.404219] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 53.404290] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 53.404360] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 53.404429] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 53.404516] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 53.404619] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 53.405781] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1982000 for xe_guc_init_post_hwconfig [xe] <7>[ 53.429312] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 53.450609] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 53.451265] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 53.453155] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 53.453479] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.456314] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 53.456677] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.459641] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 53.460002] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.503794] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 53.504335] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 53.504450] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 53.504560] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 53.506493] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008 <7>[ 53.506654] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108 <7>[ 53.506820] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208 <7>[ 53.506965] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308 <7>[ 53.507104] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8 <7>[ 53.507247] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008 <7>[ 53.507381] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108 <7>[ 53.507513] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208 <7>[ 53.507630] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308 <7>[ 53.507883] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8 <7>[ 53.507999] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008 <7>[ 53.508114] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108 <7>[ 53.508227] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208 <7>[ 53.508340] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308 <7>[ 53.508451] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8 <7>[ 53.508795] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 53.508924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 53.509050] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 53.509187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset] <7>[ 53.509338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset] <7>[ 53.510246] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 53.510371] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 53.518456] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B] <7>[ 53.518637] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C] <7>[ 53.524424] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs <7>[ 53.526930] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered <7>[ 53.527127] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 53.527264] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Panel prepare <7>[ 53.527638] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 53.529010] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event <7>[ 53.529075] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs <7>[ 53.529475] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 53.530410] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event <7>[ 53.530459] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs <7>[ 53.531348] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 53.532476] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event <7>[ 53.532523] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs <7>[ 53.533013] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 53.534120] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event <6>[ 53.534164] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 53.534213] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 53.545796] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 53.549951] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 53.551153] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 53.551328] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 53.551949] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 53.551955] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <7>[ 53.553813] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 53.554029] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.554200] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.554353] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 53.554531] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.554665] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.554854] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 53.555010] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.555140] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.555262] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <6>[ 53.555399] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 53.555835] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 53.555960] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 53.556076] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping <7>[ 53.556186] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping <7>[ 53.556295] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 53.556566] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.557408] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7>[ 53.557417] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7>[ 53.558042] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.559079] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.559233] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.559376] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.559648] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.559654] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.559655] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.559657] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.559659] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.559661] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 53.559666] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.559667] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 53.559671] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.559702] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7>[ 53.559911] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.560043] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.560471] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 53.561488] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] status updated from unknown to connected <7>[ 53.561796] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 53.562094] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.562097] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.562098] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.562136] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7>[ 53.562142] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.562147] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7>[ 53.562151] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 53.562238] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 53.562247] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 53.562345] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7>[ 53.562349] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7>[ 53.562352] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 53.562513] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7>[ 53.562516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7>[ 53.562519] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 53.562675] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7>[ 53.562678] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7>[ 53.562680] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7>[ 53.562683] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7>[ 53.562684] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7>[ 53.562787] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.562807] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2880x1800 <7>[ 53.562810] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 53.562823] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.562904] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 53.562914] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 53.570897] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da3000 <6>[ 53.574026] fbcon: xedrmfb (fb0) is primary device <7>[ 53.576067] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 53.576253] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 53.576404] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 53.576556] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 53.576703] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7>[ 53.576863] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 53.577008] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 53.577149] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 53.577287] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 53.577427] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.577566] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.577704] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 53.577855] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.577991] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.578129] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.578263] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.578396] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.578528] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.578659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 53.578804] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 53.578941] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.579073] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 53.579202] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.579330] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.579457] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.579583] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.579708] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.579841] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.579961] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 53.580092] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 53.580222] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 53.580348] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7>[ 53.580510] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 53.580643] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 53.580780] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 53.580893] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 53.581005] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 53.581117] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.581226] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.581333] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.581437] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.581538] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.581637] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.581735] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.581868] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.581982] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.582083] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.582177] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.582283] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.582377] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.582469] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.582559] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.582652] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.582754] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.582849] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.582944] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.583038] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.583158] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1390840 num active planes 1 <7>[ 53.583305] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 53.583443] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 53.583578] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.583710] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.583852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 53.584039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset] <7>[ 53.584194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.584340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 53.584467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.584573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.584676] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.584786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.584899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 53.585008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.585125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.585241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.585355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 53.585469] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.585587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 53.585711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 53.585876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 53.585996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 53.586107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 53.586219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 53.586328] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 53.586444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.586551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0 set context latency: 0 <7>[ 53.586659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97 <7>[ 53.586774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.586882] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.586999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.587117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.587243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.587372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.587488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710 <7>[ 53.587601] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.587710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.587830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.587943] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.588050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 53.588159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 53.588266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.588371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.588476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.588581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.588687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.588801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.588904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.589005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.589106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.589207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.589308] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.589416] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 53.589532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 53.589648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 53.589778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 53.589889] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 53.589996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 53.590101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 53.590205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7>[ 53.603308] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 53.603500] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <6>[ 53.608213] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 53.608490] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 53.608971] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.609135] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.609287] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.609434] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.609576] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.609714] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.609865] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.610000] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.610133] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.610266] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.610396] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.610511] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.610619] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.610726] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.610876] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.611000] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.611125] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.611247] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.611358] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.611459] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.611559] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.611661] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.611764] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.611880] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.611996] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.612109] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.612208] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.612303] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.612397] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.612490] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.612584] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.612677] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.612776] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.612887] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.612996] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.613106] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 53.619283] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 53.626169] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 53.628845] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 53.629491] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 53.632775] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 53.807846] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0 <7>[ 53.808617] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 53.819025] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off <7>[ 53.819163] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 53.819300] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 53.819556] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 53.819658] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7>[ 53.871686] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 53.871822] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7>[ 53.878996] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 53.879423] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 53.879702] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 53.879716] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 53.879871] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 53.880010] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A] <7>[ 53.880111] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1] <7>[ 53.880202] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A] <7>[ 53.880290] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B] <7>[ 53.880375] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C] <7>[ 53.880460] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2] <7>[ 53.880550] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A] <7>[ 53.880638] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B] <7>[ 53.880726] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C] <7>[ 53.880823] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3] <7>[ 53.880902] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A] <7>[ 53.880981] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B] <7>[ 53.881063] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C] <7>[ 53.881175] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 53.882540] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on <7>[ 53.882637] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (497 ms remaining) <7>[ 53.906937] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 53.907074] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7>[ 53.907177] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 53.907308] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 54.053675] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 54.384951] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 54.444790] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.444998] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 54.445203] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 54.481639] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.482053] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7>[ 54.482457] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 54.482927] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 54.608952] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.608953] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.608954] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.658114] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.660324] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7>[ 54.660780] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 54.663113] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.664354] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 54.665288] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 54.666510] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 54.667680] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 54.668798] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 54.669239] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 54.670714] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 54.671147] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 54.672083] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 54.672665] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 54.673101] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 54.673577] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 192000 <7>[ 54.689646] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 54.691931] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1] <7>[ 54.692420] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <7>[ 54.693937] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 54.695406] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 54.696605] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <6>[ 54.697346] Console: switching to colour frame buffer device 180x56 <7>[ 54.697195] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:205:eDP-1] set backlight level = 13892 <6>[ 54.727950] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 54.738836] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 54.739777] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 54.740294] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 54.740810] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 54.741283] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 54.741701] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 54.742136] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 54.742526] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 54.742939] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 54.743378] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 54.743789] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 54.744158] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 54.744568] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 54.744997] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 54.745472] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 54.745940] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 54.746395] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 54.746818] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 54.747258] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 54.747647] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 54.748025] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 54.748348] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 54.749701] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 54.750041] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 54.750404] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 54.750765] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 54.751127] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 54.751418] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.751690] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.752777] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.756367] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 54.758428] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.759194] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 54.773659] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 54.773691] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.774478] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7>[ 54.774502] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7>[ 54.775338] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.776082] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.776514] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.776942] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.777633] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.777646] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 54.777648] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.777650] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.777656] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.777658] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 54.777673] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.777675] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 54.777680] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.777720] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7>[ 54.777983] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.778212] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 54.779044] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 54.779047] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 54.779049] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.779129] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7>[ 54.779147] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.779156] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7>[ 54.779163] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 54.779446] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.779877] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.780263] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.780698] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.780969] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7>[ 54.780977] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7>[ 54.780982] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 54.781259] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.781490] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7>[ 54.781496] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7>[ 54.781502] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 54.781808] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.782049] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7>[ 54.782055] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7>[ 54.782061] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7>[ 54.782065] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7>[ 54.782069] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7>[ 54.782304] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.782351] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2880x1800 <7>[ 54.782356] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 54.782430] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.784793] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.785094] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 54.790450] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 54.824034] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 54.824887] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 54.825363] [IGT] xe_module_load: exiting, ret=0 <7>[ 54.882039] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 54.887812] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.888125] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.889263] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 55.823861] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.823833] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.823846] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.297460] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD off <7>[ 57.298039] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067