<5>[ 0.000000] Linux version 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Sep 11 19:43:08 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/CPU: Model not found in latest microcode list <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f6b018 ESRT=0x68f7da98 MOKvar=0x6cd0c000 <6>[ 0.000000] efi: Remove mem274: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem276: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D96.2504232223 04/23/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000387] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000388] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004881] esrt: Reserving ESRT space from 0x0000000068f7da98 to 0x0000000068f7dbe8. <7>[ 0.004889] e820: update [mem 0x68f7d000-0x68f7dfff] usable ==> reserved <6>[ 0.004908] Using GB pages for direct mapping <6>[ 0.005566] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005567] printk: early log buf free: 258752(98%) <6>[ 0.005567] Secure boot disabled <6>[ 0.005569] ACPI: Early table checksum verification disabled <6>[ 0.005572] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005575] ACPI: XSDT 0x000000006FF70228 00019C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005579] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005582] ACPI: DSDT 0x000000006FFB6000 025547 (v02 INTEL LNL 00000002 01000013) <6>[ 0.005584] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005585] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005586] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005588] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005589] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005590] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005591] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005593] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005594] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005595] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005597] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005598] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005600] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005601] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005602] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005603] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005605] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005606] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005607] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005609] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005610] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005611] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005612] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005614] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005615] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005616] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005617] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005619] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005620] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005621] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005623] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005624] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005625] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005627] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005628] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005629] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005630] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005632] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005633] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005634] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005636] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005637] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005638] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005640] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005641] ACPI: ASF! 0x000000006FF61000 000074 (v32 INTEL LNL 00000002 01000013) <6>[ 0.005642] ACPI: PHAT 0x000000006FF60000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005643] ACPI: BGRT 0x000000006FF5F000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005644] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005645] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb546] <6>[ 0.005646] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005646] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005646] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005647] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005647] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005647] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005647] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005648] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005648] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005648] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005649] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005649] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005649] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005649] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005650] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005650] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005650] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005650] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005651] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005651] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005651] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005652] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005652] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005652] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005652] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005653] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005653] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005653] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005654] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005654] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005654] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005654] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005655] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005655] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005655] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005656] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005656] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005656] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005656] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005658] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005658] ACPI: Reserving ASF! table memory at [mem 0x6ff61000-0x6ff61073] <6>[ 0.005659] ACPI: Reserving PHAT table memory at [mem 0x6ff60000-0x6ff607bf] <6>[ 0.005659] ACPI: Reserving BGRT table memory at [mem 0x6ff5f000-0x6ff5f037] <6>[ 0.005739] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005943] No NUMA configuration found <6>[ 0.005943] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005948] NODE_DATA(0) allocated [mem 0x87f352e80-0x87f37dfff] <6>[ 0.006063] Zone ranges: <6>[ 0.006063] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006064] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006065] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006066] Device empty <6>[ 0.006066] Movable zone start for each node <6>[ 0.006067] Early memory node ranges <6>[ 0.006067] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006068] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006068] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006069] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006070] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006075] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006090] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007706] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035694] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035701] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036180] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.036187] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036237] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036239] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036240] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036242] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036243] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036254] e820: update [mem 0x68f28000-0x68f42fff] usable ==> reserved <6>[ 0.036261] TSC deadline timer available <6>[ 0.036262] CPU topo: Max. logical packages: 1 <6>[ 0.036263] CPU topo: Max. logical dies: 1 <6>[ 0.036263] CPU topo: Max. dies per package: 1 <6>[ 0.036265] CPU topo: Max. threads per core: 1 <6>[ 0.036265] CPU topo: Num. cores per package: 8 <6>[ 0.036265] CPU topo: Num. threads per package: 8 <6>[ 0.036266] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036279] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036281] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036281] PM: hibernation: Registered nosave memory: [mem 0x68f28000-0x68f42fff] <6>[ 0.036282] PM: hibernation: Registered nosave memory: [mem 0x68f7d000-0x68f7dfff] <6>[ 0.036283] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036284] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036286] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036286] Booting paravirtualized kernel on bare hardware <6>[ 0.036288] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036297] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036629] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.036634] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036635] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036648] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036740] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036745] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.036759] random: crng init done <6>[ 0.038596] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039518] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039578] software IO TLB: area num 8. <6>[ 0.046926] Fallback order for Node 0: 0 <6>[ 0.046930] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046930] Policy zone: Normal <6>[ 0.046939] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046940] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046943] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047869] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.080359] ********************************************************** <4>[ 0.080360] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080360] ** ** <4>[ 0.080360] ** This system shows unhashed kernel memory addresses ** <4>[ 0.080361] ** via the console, logs, and other interfaces. This ** <4>[ 0.080361] ** might reduce the security of your system. ** <4>[ 0.080361] ** ** <4>[ 0.080361] ** If you see this message and you are not debugging ** <4>[ 0.080361] ** the kernel, report this immediately to your system ** <4>[ 0.080362] ** administrator! ** <4>[ 0.080362] ** ** <4>[ 0.080362] ** Use hash_pointers=always to force this mode off ** <4>[ 0.080362] ** ** <4>[ 0.080362] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080362] ********************************************************** <6>[ 0.081457] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089746] ftrace: allocating 60429 entries in 238 pages <6>[ 0.089748] ftrace: allocated 238 pages with 6 groups <6>[ 0.091134] Dynamic Preempt: voluntary <6>[ 0.091628] Running RCU self tests <6>[ 0.091628] Running RCU synchronous self tests <6>[ 0.091629] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.091629] rcu: RCU lockdep checking is enabled. <6>[ 0.091630] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.091630] Trampoline variant of Tasks RCU enabled. <6>[ 0.091631] Rude variant of Tasks RCU enabled. <6>[ 0.091631] Tracing variant of Tasks RCU enabled. <6>[ 0.091631] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.091632] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091673] Running RCU synchronous self tests <6>[ 0.091676] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091680] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091682] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101692] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102156] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102568] Console: colour dummy device 80x25 <6>[ 0.102577] printk: legacy console [tty0] enabled <6>[ 0.103726] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103734] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103737] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103741] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103744] ... CLASSHASH_SIZE: 4096 <6>[ 0.103748] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103752] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103755] ... CHAINHASH_SIZE: 262144 <6>[ 0.103759] memory used by lock dependency info: 54145 kB <6>[ 0.103763] memory used for stack traces: 4224 kB <6>[ 0.103767] per task-struct memory footprint: 1920 bytes <6>[ 0.103818] ACPI: Core revision 20250404 <6>[ 0.104708] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104772] APIC: Switch to symmetric I/O mode setup <6>[ 0.104777] DMAR: Host address width 38 <6>[ 0.104781] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104812] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104845] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104866] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104890] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104911] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104947] DMAR: SATC flags: 0x1 <6>[ 0.104956] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104961] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104966] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107008] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112184] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112203] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112280] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112286] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112461] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112466] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112475] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112488] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112495] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112500] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112507] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112522] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112528] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112533] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112538] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112544] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112549] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112556] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112561] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112566] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112571] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112575] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113197] Freeing SMP alternatives memory: 56K <6>[ 0.113197] pid_max: default: 32768 minimum: 301 <6>[ 0.113197] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.113197] landlock: Up and running. <6>[ 0.113197] Yama: becoming mindful. <6>[ 0.113197] AppArmor: AppArmor initialized <6>[ 0.113197] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113197] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113197] Running RCU synchronous self tests <6>[ 0.113197] Running RCU synchronous self tests <6>[ 0.113197] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113197] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113197] core: cpu_core PMU driver: <6>[ 0.113197] ... version: 6 <6>[ 0.113197] ... bit width: 48 <6>[ 0.113197] ... generic registers: 10 <6>[ 0.113197] ... value mask: 0000ffffffffffff <6>[ 0.113197] ... max period: 00007fffffffffff <6>[ 0.113197] ... fixed-purpose events: 4 <6>[ 0.113197] ... event mask: 0001000f000003ff <6>[ 0.113215] signal: max sigframe size: 3632 <6>[ 0.113238] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113339] rcu: Hierarchical SRCU implementation. <6>[ 0.113344] rcu: Max phase no-delay instances is 400. <6>[ 0.113492] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115172] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115484] smp: Bringing up secondary CPUs ... <6>[ 0.115827] smpboot: x86: Booting SMP configuration: <6>[ 0.115834] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010856] core: cpu_atom PMU driver: <6>[ 0.010856] ... version: 6 <6>[ 0.010856] ... bit width: 48 <6>[ 0.010856] ... generic registers: 8 <6>[ 0.010856] ... value mask: 0000ffffffffffff <6>[ 0.010856] ... max period: 00007fffffffffff <6>[ 0.010856] ... fixed-purpose events: 6 <6>[ 0.010856] ... event mask: 00000077000000ff <6>[ 0.122305] smp: Brought up 1 node, 8 CPUs <6>[ 0.122305] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.124324] Memory: 32358744K/33158528K available (25252K kernel code, 5635K rwdata, 9504K rodata, 5672K init, 68284K bss, 777192K reserved, 0K cma-reserved) <6>[ 0.124780] devtmpfs: initialized <6>[ 0.125407] x86/mm: Memory block size: 128MB <6>[ 0.146564] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.147361] Running RCU synchronous self tests <6>[ 0.147374] Running RCU synchronous self tests <6>[ 0.148206] Running RCU Tasks wait API self tests <6>[ 0.148250] Running RCU Tasks Rude wait API self tests <6>[ 0.148250] Running RCU Tasks Trace wait API self tests <6>[ 0.161261] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.161472] posixtimers hash table entries: 4096 (order: 6, 294912 bytes, linear) <6>[ 0.161546] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.162201] pinctrl core: initialized pinctrl subsystem <6>[ 0.162914] PM: RTC time: 01:52:50, date: 2025-09-12 <6>[ 0.163654] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.164657] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.164961] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.165246] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.165303] audit: initializing netlink subsys (disabled) <5>[ 0.165448] audit: type=2000 audit(1757641970.053:1): state=initialized audit_enabled=0 res=1 <6>[ 0.166419] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.166421] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.166427] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.166431] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.166436] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.166475] cpuidle: using governor ladder <6>[ 0.166475] cpuidle: using governor menu <6>[ 0.166475] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.167360] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.167388] PCI: Using configuration type 1 for base access <6>[ 0.167512] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.169649] HugeTLB: allocation took 0ms with hugepage_allocation_threads=2 <6>[ 0.169649] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.169649] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.169649] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.169649] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.177597] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.177608] raid6: using avx2x2 recovery algorithm <6>[ 0.178435] fbcon: Taking over console <6>[ 0.178612] ACPI: Added _OSI(Module Device) <6>[ 0.178621] ACPI: Added _OSI(Processor Device) <6>[ 0.178629] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.180202] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.786503] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.800412] ACPI: EC: EC started <6>[ 0.800423] ACPI: EC: interrupt blocked <6>[ 0.802804] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.802809] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.904227] Callback from call_rcu_tasks() invoked. <6>[ 1.125687] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.125710] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.171113] ACPI: Interpreter enabled <6>[ 1.171206] ACPI: PM: (supports S0 S4 S5) <6>[ 1.171210] ACPI: Using IOAPIC for interrupt routing <6>[ 1.176449] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.176456] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.195645] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.195694] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.237048] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.237346] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.240485] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.504096] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.518252] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.655258] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.657058] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.665440] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.674768] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.675031] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.675285] ACPI: \_SB_.PC00.D3C_: New power resource <3>[ 1.732472] ACPI: \: Can't tag data node <3>[ 1.735735] ACPI: \: Can't tag data node <3>[ 1.739262] ACPI: \: Can't tag data node <3>[ 1.740197] ACPI: \: Can't tag data node <3>[ 1.745998] ACPI: \: Can't tag data node <6>[ 1.917860] ACPI: \_TZ_.FN00: New power resource <6>[ 1.919711] ACPI: \_TZ_.FN01: New power resource <6>[ 1.921093] ACPI: \_TZ_.FN02: New power resource <6>[ 1.922733] ACPI: \_TZ_.FN03: New power resource <6>[ 1.924169] ACPI: \_TZ_.FN04: New power resource <6>[ 1.926973] ACPI: \PIN_: New power resource <6>[ 1.936150] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 1.936186] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 1.944585] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 1.969905] PCI host bridge to bus 0000:00 <6>[ 1.969985] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 1.970006] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 1.970024] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 1.970044] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 1.970064] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 1.970086] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 1.978113] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 1.979517] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 1.979649] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 1.979670] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 1.979692] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 1.979775] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 1.983585] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 1.983657] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 1.987526] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 1.987614] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 1.987637] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 1.990313] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 1.990388] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 1.990412] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 1.990447] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 1.990637] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 1.990766] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.002952] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.003027] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.003050] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.003084] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.003280] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.003391] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.014405] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.014477] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.014498] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.014530] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.014711] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.014821] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.024708] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.024776] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.024804] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.025649] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.025708] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.025725] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.026735] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.026827] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.026951] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.030941] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.031035] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.031051] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.031159] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.031168] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.034442] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.034536] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.034552] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.034659] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.034668] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.037772] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.037868] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.037995] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.044274] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.044435] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.044613] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.045687] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.045781] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.045901] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.049718] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.049822] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.049839] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.050471] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.050743] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.064237] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.064455] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.078933] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.079149] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.092784] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.093000] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.106759] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.106916] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.107087] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.112665] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.112772] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027] <6>[ 2.112784] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff] <6>[ 2.113398] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.113460] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.113476] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.113491] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.113694] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.113808] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.124520] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.124651] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.124702] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.125147] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.125387] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.137623] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.141569] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.141802] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.141838] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.142075] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.143806] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.143988] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.144019] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.147907] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.148212] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.148856] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.148968] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff] <6>[ 2.149209] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.152722] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.153207] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.153529] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.153964] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.154078] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.154098] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.154117] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.154434] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.154444] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.155922] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.157690] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.158786] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.158890] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.162218] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.162363] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.585683] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 12.989810] Low-power S0 idle used by default for system suspend <6>[ 13.043762] ACPI: EC: interrupt unblocked <6>[ 13.043773] ACPI: EC: event unblocked <6>[ 13.043809] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 13.043816] ACPI: EC: GPE=0x6e <6>[ 13.043821] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 13.043830] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 13.044584] iommu: Default domain type: Translated <6>[ 13.044584] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 13.050045] SCSI subsystem initialized <7>[ 13.050370] libata version 3.00 loaded. <6>[ 13.050698] ACPI: bus type USB registered <6>[ 13.051221] usbcore: registered new interface driver usbfs <6>[ 13.051338] usbcore: registered new interface driver hub <6>[ 13.051439] usbcore: registered new device driver usb <6>[ 13.051773] pps_core: LinuxPPS API ver. 1 registered <6>[ 13.051784] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 13.051833] PTP clock support registered <6>[ 13.052470] EDAC MC: Ver: 3.0.0 <6>[ 13.055212] efivars: Registered efivars operations <6>[ 13.058474] NetLabel: Initializing <6>[ 13.058485] NetLabel: domain hash size = 128 <6>[ 13.058495] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 13.058653] NetLabel: unlabeled traffic allowed by default <6>[ 13.058691] mctp: management component transport protocol core <6>[ 13.058704] NET: Registered PF_MCTP protocol family <6>[ 13.058808] PCI: Using ACPI for IRQ routing <7>[ 13.107534] PCI: pci_cache_line_size set to 64 bytes <6>[ 13.107823] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 13.107978] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 13.107995] e820: reserve RAM buffer [mem 0x68f28000-0x6bffffff] <7>[ 13.108001] e820: reserve RAM buffer [mem 0x68f7d000-0x6bffffff] <7>[ 13.108007] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 13.108012] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 13.109802] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 13.109802] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 13.109802] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 13.109802] vgaarb: loaded <7>[ 13.113232] Monitor-Mwait will be used to enter C-1 state <7>[ 13.113338] Monitor-Mwait will be used to enter C-2 state <7>[ 13.113338] Monitor-Mwait will be used to enter C-3 state <6>[ 13.122246] clocksource: Switched to clocksource tsc-early <5>[ 13.132152] VFS: Disk quotas dquot_6.6.0 <6>[ 13.132203] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 13.134395] AppArmor: AppArmor Filesystem Enabled <6>[ 13.134804] pnp: PnP ACPI init <6>[ 13.136929] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 13.136960] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 13.140506] system 00:02: [io 0x06a4] has been reserved <6>[ 13.140528] system 00:02: [io 0x06a0] has been reserved <6>[ 13.182140] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 13.182154] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 13.182167] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 13.182176] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 13.182185] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 13.182195] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 13.182205] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 13.182215] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 13.185164] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 13.187774] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 13.187950] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 13.192517] pnp: PnP ACPI: found 8 devices <6>[ 13.225372] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 13.225868] NET: Registered PF_INET protocol family <6>[ 13.226157] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.231407] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 13.231851] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 13.232251] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.233583] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 13.236738] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 13.237459] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.239060] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.240717] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 13.240868] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 13.240897] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 13.240920] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 13.241012] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned <6>[ 13.241030] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned <6>[ 13.241045] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned <6>[ 13.241062] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 13.241119] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 13.241173] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 13.241226] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 13.241281] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 13.241351] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 13.241370] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] <6>[ 13.241391] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 13.241416] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.241443] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 13.241457] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff] <6>[ 13.241477] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 13.241497] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.241524] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 13.241538] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff] <6>[ 13.241558] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 13.241578] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.241606] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 13.241619] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 13.241639] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 13.241667] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 13.241713] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 13.241775] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 13.241790] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 13.241803] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 13.241818] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 13.241835] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 13.241852] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] <6>[ 13.241877] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 13.241891] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.241908] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff] <6>[ 13.241920] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 13.241934] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.241950] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff] <6>[ 13.241962] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 13.241976] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.241993] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 13.242007] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 13.242021] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 13.244318] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 13.247625] PCI: CLS 0 bytes, default 64 <6>[ 13.247825] DMAR: No RMRR found <6>[ 13.247846] DMAR: No ATSR found <6>[ 13.247855] DMAR: dmar1: Using Queued invalidation <6>[ 13.247886] DMAR: dmar0: Using Queued invalidation <6>[ 13.247900] DMAR: dmar2: Using Queued invalidation <6>[ 13.250202] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 13.250400] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 13.250570] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 13.250720] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 13.257837] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 13.261621] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 13.261782] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 13.261951] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 13.262116] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 13.262337] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 13.262443] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 13.262549] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 13.262723] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 13.262897] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 13.263087] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 13.263198] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 13.263437] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 13.263551] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 13.263668] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 13.263783] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 13.263992] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 13.264106] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 13.264260] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 13.264434] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 13.264704] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 13.264824] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 13.265021] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 13.265141] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 13.265262] pci 0000:00:1f.6: Adding to iommu group 17 <6>[ 13.265412] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 13.265591] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 13.285015] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 13.285031] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 13.285045] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 13.293576] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 13.293909] clocksource: Switched to clocksource tsc <6>[ 13.294132] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 13.305232] Initialise system trusted keyrings <5>[ 13.305346] Key type blacklist registered <6>[ 13.306212] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 13.322770] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 13.322950] ntfs3: Enabled Linux POSIX ACLs support <6>[ 13.322961] ntfs3: Read-only LZX/Xpress compression included <5>[ 13.323934] integrity: Platform Keyring initialized <5>[ 13.323965] integrity: Machine keyring initialized <6>[ 13.334447] xor: automatically using best checksumming function avx <5>[ 13.334463] Key type asymmetric registered <5>[ 13.334480] Asymmetric key parser 'x509' registered <6>[ 13.334640] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 13.335118] io scheduler mq-deadline registered <6>[ 13.337026] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 13.339466] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 13.340307] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 13.342198] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 13.342880] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 13.344719] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 13.345377] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 13.347070] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 13.347688] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 13.349948] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 13.350658] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 13.353782] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 13.354132] ACPI: button: Lid Switch [LID0] <6>[ 13.354619] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 13.354961] ACPI: button: Sleep Button [SLPB] <6>[ 13.355381] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 13.356020] ACPI: button: Power Button [PWRB] <6>[ 13.526334] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 13.526354] ACPI: thermal: Thermal Zone [TZ00] (59 C) <6>[ 13.528522] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 13.528547] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 13.530840] ACPI: battery: Slot [BAT0] (battery present) <6>[ 13.553398] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 13.600254] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 13.603165] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 13.628101] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 13.633801] hpet_acpi_add: no address or irqs in _CRS <6>[ 13.634039] Linux agpgart interface v0.103 <6>[ 13.635355] ACPI: bus type drm_connector registered <7>[ 13.637118] initcall simpledrm_platform_driver_init blacklisted <6>[ 13.669777] loop: module loaded <6>[ 13.743428] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 13.847474] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 13.992197] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 14.172256] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 14.352396] Key type psk registered <6>[ 14.356935] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 14.358306] nvme nvme0: pci function 0000:80:00.0 <6>[ 14.359471] tun: Universal TUN/TAP device driver, 1.6 <6>[ 14.361625] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.361820] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 14.365954] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.369412] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.369454] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 14.369492] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.370114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17 <6>[ 14.370150] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.370168] usb usb1: Product: xHCI Host Controller <6>[ 14.370182] usb usb1: Manufacturer: Linux 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ xhci-hcd <6>[ 14.370202] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 14.373495] hub 1-0:1.0: USB hub found <6>[ 14.373628] hub 1-0:1.0: 1 port detected <6>[ 14.379848] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17 <6>[ 14.379892] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.379911] usb usb2: Product: xHCI Host Controller <6>[ 14.379923] usb usb2: Manufacturer: Linux 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ xhci-hcd <6>[ 14.379943] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 14.381907] hub 2-0:1.0: USB hub found <6>[ 14.381986] hub 2-0:1.0: 3 ports detected <6>[ 14.397877] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 14.409618] nvme0n1: p1 p2 <6>[ 14.428157] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.428213] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 14.430485] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.433280] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.433315] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 14.433343] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.433674] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17 <6>[ 14.433697] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.433714] usb usb3: Product: xHCI Host Controller <6>[ 14.433727] usb usb3: Manufacturer: Linux 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ xhci-hcd <6>[ 14.433747] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 14.435722] hub 3-0:1.0: USB hub found <6>[ 14.435796] hub 3-0:1.0: 8 ports detected <6>[ 14.485480] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17 <6>[ 14.485501] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.485515] usb usb4: Product: xHCI Host Controller <6>[ 14.485525] usb usb4: Manufacturer: Linux 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ xhci-hcd <6>[ 14.485541] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 14.488641] hub 4-0:1.0: USB hub found <6>[ 14.488947] hub 4-0:1.0: 2 ports detected <6>[ 14.500014] usbcore: registered new interface driver usb-storage <6>[ 14.500154] usbcore: registered new interface driver usbserial_generic <6>[ 14.500218] usbserial: USB Serial support registered for generic <6>[ 14.500276] usbcore: registered new interface driver ftdi_sio <6>[ 14.500303] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 14.500358] usbcore: registered new interface driver pl2303 <6>[ 14.500384] usbserial: USB Serial support registered for pl2303 <6>[ 14.500480] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 14.500486] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 15.212820] i8042: Can't read CTR while initializing i8042 <3>[ 15.212826] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 15.216140] mousedev: PS/2 mouse device common for all mice <6>[ 15.217500] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 15.219552] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 15.219761] rtc_cmos rtc_cmos: setting system clock to 2025-09-12T01:53:06 UTC (1757641986) <6>[ 15.219977] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 15.220038] i2c_dev: i2c /dev entries driver <6>[ 15.231833] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 15.232052] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 15.232153] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 15.232424] device-mapper: uevent: version 1.0.3 <6>[ 15.235229] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 15.235369] intel_pstate: Intel P-state driver initializing <6>[ 15.241255] Hybrid CPU capacity scaling enabled <6>[ 15.241681] processor cpu0: EM: created perf domain <6>[ 15.242036] processor cpu1: EM: created perf domain <6>[ 15.242307] processor cpu2: EM: created perf domain <6>[ 15.242572] processor cpu3: EM: created perf domain <6>[ 15.242835] processor cpu4: EM: created perf domain <6>[ 15.243134] processor cpu5: EM: created perf domain <6>[ 15.243521] processor cpu6: EM: created perf domain <6>[ 15.243752] processor cpu7: EM: created perf domain <6>[ 15.244832] intel_pstate: HWP enabled <6>[ 15.244840] sdhci: Secure Digital Host Controller Interface driver <6>[ 15.244846] sdhci: Copyright(c) Pierre Ossman <6>[ 15.246238] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 15.248489] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 15.249251] drop_monitor: Initializing network drop monitor service <6>[ 15.249444] NET: Registered PF_INET6 protocol family <6>[ 15.250679] Segment Routing with IPv6 <6>[ 15.250723] In-situ OAM (IOAM) with IPv6 <6>[ 15.250775] NET: Registered PF_PACKET protocol family <5>[ 15.251018] Key type dns_resolver registered <4>[ 15.255173] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 15.255720] microcode: Current revision: 0x00000121 <6>[ 15.256573] IPI shorthand broadcast: enabled <6>[ 15.271202] sched_clock: Marking stable (15261002114, 9856690)->(15358005291, -87146487) <6>[ 15.271969] registered taskstats version 1 <5>[ 15.273025] Loading compiled-in X.509 certificates <6>[ 15.316553] Demotion targets for Node 0: null <6>[ 15.316760] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 15.316768] kmemleak: Automatic memory scanning thread started <5>[ 15.316983] Key type .fscrypt registered <5>[ 15.316988] Key type fscrypt-provisioning registered <6>[ 15.320225] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 15.322851] Key type encrypted registered <6>[ 15.322860] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 15.323032] ima: No TPM chip found, activating TPM-bypass! <5>[ 15.323046] Loading compiled-in module X.509 certificates <5>[ 15.323826] Loaded X.509 cert 'Build time autogenerated kernel key: 19fb72be55b55e6161fac5669084e96104ea9ebc' <6>[ 15.323836] ima: Allocated hash algorithm: sha256 <6>[ 15.323881] ima: No architecture policies found <6>[ 15.323966] evm: Initialising EVM extended attributes: <6>[ 15.323971] evm: security.selinux <6>[ 15.323974] evm: security.SMACK64 <6>[ 15.323977] evm: security.SMACK64EXEC <6>[ 15.323980] evm: security.SMACK64TRANSMUTE <6>[ 15.323984] evm: security.SMACK64MMAP <6>[ 15.323987] evm: security.apparmor <6>[ 15.323990] evm: security.ima <6>[ 15.323993] evm: security.capability <6>[ 15.323996] evm: HMAC attrs: 0x1 <6>[ 15.325924] PM: Magic number: 9:362:862 <6>[ 15.326115] netconsole: network logging started <6>[ 15.326679] RAS: Correctable Errors collector initialized. <6>[ 15.326833] clk: Disabling unused clocks <6>[ 15.326844] PM: genpd: Disabling unused power domains <4>[ 15.327748] check access for rdinit=/init failed: -2, ignoring <6>[ 15.327756] md: Waiting for all devices to be available before autodetect <6>[ 15.327761] md: If you don't use raid, use raid=noautodetect <6>[ 15.327767] md: Autodetecting RAID arrays. <6>[ 15.327775] md: autorun ... <6>[ 15.327779] md: ... autorun DONE. <6>[ 15.370204] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none. <6>[ 15.370271] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 15.370769] devtmpfs: mounted <6>[ 15.383360] Freeing unused decrypted memory: 2028K <6>[ 15.384244] Freeing unused kernel image (initmem) memory: 5672K <6>[ 15.384268] Write protecting the kernel read-only data: 36864k <6>[ 15.384951] Freeing unused kernel image (text/rodata gap) memory: 1368K <6>[ 15.385146] Freeing unused kernel image (rodata/data gap) memory: 736K <6>[ 15.390154] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 15.390177] Run /sbin/init as init process <7>[ 15.390181] with arguments: <7>[ 15.390182] /sbin/init <7>[ 15.390183] with environment: <7>[ 15.390183] HOME=/ <7>[ 15.390184] TERM=linux <7>[ 15.390184] BOOT_IMAGE=/boot/drm_intel <7>[ 15.447425] systemd[1]: Inserted module 'autofs4' <7>[ 15.465015] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 15.465091] systemd[1]: Detected architecture x86-64. <7>[ 15.467611] systemd[1]: Hostname set to . <7>[ 15.683091] systemd[1]: Queued start job for default target graphical.target. <7>[ 15.718444] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 15.721630] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 15.723563] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 15.723864] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 15.724576] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 15.724694] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8... <7>[ 15.724780] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 15.724867] systemd[1]: Reached target slices.target - Slice Units. <7>[ 15.724938] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 15.725006] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 15.725079] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 15.725326] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 15.725686] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 15.725966] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 15.726286] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 15.726529] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 15.726721] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 15.727016] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 15.727343] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 15.727611] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 15.727794] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.728117] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 15.728373] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 15.731696] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 15.734369] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 15.737177] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 15.740089] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 15.747072] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 15.750531] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 15.753380] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 15.757485] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 15.760004] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 15.762903] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 15.765889] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 15.770699] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 15.774646] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 15.779601] systemd-journald[204]: Collecting audit messages is disabled. <7>[ 15.781878] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 15.785495] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 15.785784] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 15.789356] pstore: Using crash dump compression: deflate <7>[ 15.790362] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 15.791057] pstore: Registered efi_pstore as persistent store backend <7>[ 15.798040] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 15.798140] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.798214] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.802601] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 15.802948] fuse: init (API version 7.44) <7>[ 15.809236] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 15.944424] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. <6>[ 15.973274] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:274595840k SS <7>[ 15.991726] systemd-journald[204]: Received client request to flush runtime journal. <7>[ 16.012318] systemd-journald[204]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 16.012335] systemd-journald[204]: Rotating system journal. <4>[ 16.679553] nvme nvme0: using unchecked data buffer <6>[ 16.897964] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 16.901343] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 16.940091] intel-hid INTC107B:00: platform supports 5 button array <6>[ 16.941704] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 16.948169] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <5>[ 16.978596] audit: type=1400 audit(1757641988.257:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=420 comm="apparmor_parser" <5>[ 16.979386] audit: type=1400 audit(1757641988.258:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=421 comm="apparmor_parser" <5>[ 16.979647] audit: type=1400 audit(1757641988.258:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=419 comm="apparmor_parser" <5>[ 16.979937] audit: type=1400 audit(1757641988.259:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=423 comm="apparmor_parser" <5>[ 16.984721] audit: type=1400 audit(1757641988.263:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=424 comm="apparmor_parser" <5>[ 16.990959] audit: type=1400 audit(1757641988.270:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=426 comm="apparmor_parser" <5>[ 16.992146] audit: type=1400 audit(1757641988.271:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=425 comm="apparmor_parser" <5>[ 16.995293] audit: type=1400 audit(1757641988.274:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=427 comm="apparmor_parser" <5>[ 16.997553] audit: type=1400 audit(1757641988.276:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=428 comm="apparmor_parser" <5>[ 17.002204] audit: type=1400 audit(1757641988.281:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=430 comm="apparmor_parser" <6>[ 17.219668] pci 0000:00:05.0: Setting to D3hot <3>[ 17.231661] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <6>[ 17.232974] pci 0000:00:0b.0: Setting to D3hot <4>[ 17.244951] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 17.245117] intel_pmc_core INT33A1:00: initialized <3>[ 17.250811] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 17.439985] ACPI: bus type thunderbolt registered <6>[ 17.464792] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 17.480141] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 17.480152] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 17.496226] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 17.505094] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 17.527068] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 17.527072] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 17.529483] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 17.531716] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) <6>[ 17.532661] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 17.542246] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 17.559128] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 17.559748] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.601887] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 17.601891] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 17.601892] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 17.601893] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 17.601894] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 17.605693] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 17.607072] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.664572] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.737986] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.859130] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 17.859496] intel_rapl_common: Found RAPL domain package <6>[ 17.859499] intel_rapl_common: Found RAPL domain dram <6>[ 17.868450] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.883589] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 17.922371] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.989442] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 192 <6>[ 17.989448] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 17.994798] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.036639] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 18.042768] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.160830] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 18.208384] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 18.216607] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.237619] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 18.237627] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 18.237629] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <4>[ 18.253244] block nvme0n1: No UUID available providing old NGUID <6>[ 18.301754] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:91 <6>[ 18.301761] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 18.301953] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 18.310353] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.447452] intel_rapl_common: Found RAPL domain package <6>[ 18.447457] intel_rapl_common: Found RAPL domain core <6>[ 18.447460] intel_rapl_common: Found RAPL domain dram <6>[ 18.447462] intel_rapl_common: Found RAPL domain psys <6>[ 18.455232] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.466793] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.482342] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.493427] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 18.724594] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 18.731005] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.744212] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.760800] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1 <4>[ 18.781540] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 18.794585] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 18.794601] 0x000000000000-0x000002000000 : "BIOS" <6>[ 18.806642] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.833368] loop0: detected capacity change from 0 to 8 <6>[ 18.839035] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 19.001417] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 19.172856] Consider using thermal netlink events interface <6>[ 19.234872] hid: raw HID events driver (C) Jiri Kosina <6>[ 19.243242] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 19.276438] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.283591] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.285325] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.286280] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.289191] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.289681] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.290722] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.293147] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.294355] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.294469] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.298290] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.301252] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.304851] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.306412] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.310241] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.311821] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.315068] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.315547] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.319031] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.320799] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.324645] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.324727] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.327920] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.400839] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.408658] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.415720] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.421499] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.426586] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.431527] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.437098] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.441563] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.446956] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.450333] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.456575] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.461474] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.466309] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.471529] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.476242] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.481419] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.486986] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.493412] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.500350] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.509139] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.253553] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 20.253585] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 20.253609] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 21.193058] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 21.193088] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 21.193117] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 22.591630] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 29.781052] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 29.784614] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 36.974347] systemd-journald[204]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 51.258270] [IGT] xe_module_load: executing <4>[ 51.258357] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 51.267546] [IGT] xe_module_load: starting subtest load <5>[ 51.513119] Setting dangerous option force_probe - tainting kernel <6>[ 51.516116] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 51.517806] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 51.517818] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 51.517970] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 51.518094] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 51.520035] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 51.520202] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 51.520301] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 51.520407] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 51.520519] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 51.520607] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 51.520692] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 51.520774] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 51.520853] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 51.520970] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 51.521078] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 51.521205] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 51.521310] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 51.521406] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 51.521506] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 51.521610] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 51.521722] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 51.521833] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 51.521960] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 51.522087] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 51.522202] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.522296] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.522390] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 51.522491] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.522592] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.522696] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.522812] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 51.522952] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.523074] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.523187] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.523284] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 51.523379] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.523473] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.523566] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.523658] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 51.523743] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.523825] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.523930] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.524036] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 51.524139] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 51.524230] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 51.524315] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 51.524406] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 51.524801] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 51.524943] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 51.525067] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 51.525184] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 51.525283] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 51.525385] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 51.525491] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 51.525585] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 51.525665] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 51.525760] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 51.525869] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 51.525982] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 51.526086] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 51.526187] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 51.526273] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 51.526353] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 51.526438] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 51.526525] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 51.526620] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 51.526721] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 51.526825] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 51.526994] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 51.527108] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 51.527209] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.527295] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.527381] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 51.527471] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 51.527584] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 51.527728] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 51.527878] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 51.528209] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 51.528397] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 51.528558] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 51.528687] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 51.528797] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 51.528958] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 51.529090] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 51.529108] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 51.529239] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 51.529339] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 51.529443] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 51.529655] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 51.530094] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 51.530518] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 51.530641] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 51.530750] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 6 (6.0 usec) <7>[ 51.530852] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 106 (106.0 usec) <7>[ 51.530972] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 106 (106.0 usec) <7>[ 51.531076] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 106 (106.0 usec) <7>[ 51.531177] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 99 (99.0 usec) <7>[ 51.531262] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 106 (106.0 usec) <7>[ 51.534049] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 51.534199] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 51.534318] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 51.534444] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 51.534574] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 51.534699] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP) <7>[ 51.534827] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 51.534978] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 51.535102] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.535241] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 51.535377] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 51.535511] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 51.535647] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 51.535778] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 51.536461] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 51.536590] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 51.536714] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.536838] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 51.536978] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 51.537101] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 51.537223] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 51.537345] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 51.537470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 51.537593] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 51.537722] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 51.537846] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 51.537983] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 51.537976] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 51.538108] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 51.538226] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 51.538344] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 51.540727] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 51.540888] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 51.541039] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 51.541233] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 51.541453] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A] <7>[ 51.541665] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 51.541810] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 51.541965] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 51.542113] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 51.542249] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 51.542380] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 51.542510] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 51.542638] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 51.542765] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 51.542923] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 51.543162] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 51.543285] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 51.543407] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 51.543527] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 51.543645] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 51.543917] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 51.544220] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 51.545713] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7>[ 51.546040] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 51.547735] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 51.548296] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 51.549174] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <6>[ 51.549759] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28) <7>[ 51.549923] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 51.550256] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 51.552053] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 51.561700] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 51.561711] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 51.561712] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 51.561713] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 51.561716] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 51.561717] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 51.561722] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 51.561723] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 51.561725] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 51.561765] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 51.561766] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 51.561767] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 51.561776] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 51.562144] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms) <7>[ 51.562496] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 51.562633] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: none <7>[ 51.562790] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 51.562968] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 51.563168] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 51.563282] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 51.563380] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 51.563467] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 51.563552] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 51.563670] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 51.563868] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 51.564127] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 51.564283] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1] <7>[ 51.564629] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 51.564763] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 51.564917] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2] <7>[ 51.565223] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 51.565350] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 51.565464] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3] <7>[ 51.565966] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: enabled <7>[ 51.566113] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled <7>[ 51.566252] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled <7>[ 51.566339] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 51.566424] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 51.566508] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 51.566591] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 51.566673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 51.566756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 51.566837] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B <7>[ 51.566941] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B <7>[ 51.567046] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B <7>[ 51.567150] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B <7>[ 51.567253] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B <7>[ 51.567338] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B <7>[ 51.567421] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C <7>[ 51.567503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C <7>[ 51.567583] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C <7>[ 51.567662] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C <7>[ 51.567739] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C <7>[ 51.567815] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C <7>[ 51.568607] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 51.568714] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 51.568796] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 51.568887] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 51.568979] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A <7>[ 51.569072] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B <7>[ 51.569163] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C <7>[ 51.569250] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 51.569327] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 51.569404] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A <7>[ 51.569481] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B <7>[ 51.569556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C <7>[ 51.569633] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 51.569711] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 51.569784] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A <7>[ 51.569855] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B <7>[ 51.569968] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C <7>[ 51.570090] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: enabled <7>[ 51.570197] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled <7>[ 51.570299] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled <7>[ 51.570380] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled <7>[ 51.570607] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 51.570694] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 51.570775] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 51.570850] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 51.570951] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 51.571045] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 51.571138] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz <7>[ 51.571228] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz <7>[ 51.571306] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz <7>[ 51.571373] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz <7>[ 51.571440] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz <7>[ 51.571507] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz <7>[ 51.571574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz <7>[ 51.571639] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz <7>[ 51.571705] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz <7>[ 51.571770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz <7>[ 51.571835] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz <7>[ 51.571917] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz <7>[ 51.572167] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 51.572254] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 51.572332] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 51.572408] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 51.572510] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 51.572609] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 51.572739] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 51.572840] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 51.573113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [setup_hw_state] <7>[ 51.573240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 51.573348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 51.573450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 51.573555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 51.573659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 51.573760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 51.573852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 51.573976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 51.574094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 51.574202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 51.574296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 51.574381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 51.574464] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 51.574548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 51.574632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0 <7>[ 51.574714] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 51.574797] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 51.574884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 51.574992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 51.575100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 51.575199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 51.575279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 51.575358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710 <7>[ 51.575436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 51.575515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 51.575593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 51.575673] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 51.575752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 51.575832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 51.575934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 51.576046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 51.576159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.576267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.576354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.576436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 51.576517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 51.576595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.576672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.576748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.576824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 51.576917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state] <7>[ 51.577015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state] <7>[ 51.577296] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:88:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 51.577390] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:88:pipe A] <6>[ 51.601223] xe 0000:00:02.0: [drm] GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4 <7>[ 51.604928] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533f7 <7>[ 51.605047] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000 <7>[ 51.605139] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000 <7>[ 51.605223] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001 <7>[ 51.605305] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008d0 <7>[ 51.605384] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004 <7>[ 51.605461] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000 <7>[ 51.605537] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000 <7>[ 51.605611] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000 <7>[ 51.605684] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000 <7>[ 51.605756] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000 <7>[ 51.605827] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000 <7>[ 51.605918] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000 <7>[ 51.605995] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000 <7>[ 51.606072] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 51.606206] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 51.607232] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00] <7>[ 51.607341] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00] <7>[ 51.616916] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0 <7>[ 51.618101] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled <7>[ 51.618439] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (geometry): 00000000,00000000,0000007f <7>[ 51.618567] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (compute): 00000000,00000000,0000007f <7>[ 51.618687] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU mask per DSS: 000000ff <7>[ 51.618805] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU type: simd16 <7>[ 51.618941] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: L3 bank mask: 00000000,000000ff <6>[ 52.259550] xe 0000:00:02.0: [drm] GT0: ccs1 fused off <6>[ 52.259553] xe 0000:00:02.0: [drm] GT0: ccs2 fused off <6>[ 52.259554] xe 0000:00:02.0: [drm] GT0: ccs3 fused off <7>[ 52.259705] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine <7>[ 52.259837] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 52.259975] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 52.260098] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 52.260300] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine <7>[ 52.260449] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine <7>[ 52.260589] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine <7>[ 52.260684] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 52.260780] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 52.260885] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 52.262150] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs <7>[ 52.262243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000 <7>[ 52.262337] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000 <7>[ 52.262427] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440 <7>[ 52.262516] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000 <7>[ 52.262604] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000 <7>[ 52.262689] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f <7>[ 52.262776] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1 <7>[ 52.262864] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16 <7>[ 52.262956] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 52.263067] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 52.263173] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 52.263271] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 52.263350] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 52.263426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 52.263503] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 52.263578] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 52.263652] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 52.263725] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 52.263797] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 52.263876] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 52.263950] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 52.264036] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 52.264120] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 52.264204] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 52.264287] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs <7>[ 52.264368] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000 <7>[ 52.264452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 52.264532] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080 <7>[ 52.264611] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc <7>[ 52.264686] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01 <7>[ 52.264762] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c <7>[ 52.264838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040 <7>[ 52.264925] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200 <7>[ 52.265013] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000 <7>[ 52.265109] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08400840 <7>[ 52.265203] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002 <7>[ 52.265293] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe530] = 0x00000400 <7>[ 52.265369] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000 <7>[ 52.265444] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000 <7>[ 52.265736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs <7>[ 52.265812] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000 <7>[ 52.265895] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 52.265972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080 <7>[ 52.266316] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs <7>[ 52.266388] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000 <7>[ 52.266459] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 52.266528] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 52.266817] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs <7>[ 52.266894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000 <7>[ 52.266965] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 52.267049] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 52.267162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 52.267249] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 52.267327] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 52.267778] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled <7>[ 52.267929] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533f7 <7>[ 52.268032] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800 <7>[ 52.268132] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014 <7>[ 52.268225] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001 <7>[ 52.268313] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008d0 <7>[ 52.268396] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004 <7>[ 52.268476] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000 <7>[ 52.268554] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000 <7>[ 52.268632] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000 <7>[ 52.268697] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000 <7>[ 52.268760] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000 <7>[ 52.268821] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000 <7>[ 52.268893] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000 <7>[ 52.268964] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000 <7>[ 52.269064] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs <7>[ 52.269273] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells <7>[ 52.270538] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT0: reusable buffer with 2048 dwords at 0xd18000 for xe_guc_init_post_hwconfig [xe] <7>[ 52.272811] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs. <7>[ 52.288880] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: Updated ADS capture size 20480 (was 45056) <7>[ 52.289691] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00] <7>[ 52.289777] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00] <7>[ 52.298936] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0 <7>[ 52.299339] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled <7>[ 52.300142] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC rcs0 WA job: 4138 dwords <7>[ 52.300272] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400 <7>[ 52.300356] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040 <7>[ 52.300431] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020 <7>[ 52.300502] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240 <7>[ 52.300571] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000 <7>[ 52.300639] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420 <7>[ 52.300708] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000 <7>[ 52.300786] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 52.303807] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC bcs0 WA job: 27 dwords <7>[ 52.303914] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 52.304006] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04 <7>[ 52.306203] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC ccs0 WA job: 0 dwords <7>[ 52.306302] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04 <6>[ 52.309415] xe 0000:00:02.0: [drm] GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4 <7>[ 52.313411] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df43f7 <7>[ 52.313507] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000 <7>[ 52.313586] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000 <7>[ 52.313661] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001 <7>[ 52.313734] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e12 <7>[ 52.313808] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004 <7>[ 52.313889] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000 <7>[ 52.313982] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000 <7>[ 52.314073] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000 <7>[ 52.314163] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000 <7>[ 52.314233] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000 <7>[ 52.314301] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000 <7>[ 52.314368] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000 <7>[ 52.314436] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000 <6>[ 52.315895] xe 0000:00:02.0: [drm] GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 52.318157] xe 0000:00:02.0: [drm] GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 52.319220] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 52.319307] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 52.319415] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 52.320843] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00] <7>[ 52.321042] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00] <7>[ 52.340912] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0 <7>[ 52.341349] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled <7>[ 52.341542] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 52.341714] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 52.341891] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU mask per DSS: 00000000 <7>[ 52.342051] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU type: simd16 <7>[ 52.342202] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: L3 bank mask: 00000000,0000000f <6>[ 52.342355] xe 0000:00:02.0: [drm] GT1: vcs1 fused off <6>[ 52.342357] xe 0000:00:02.0: [drm] GT1: vcs2 fused off <6>[ 52.342359] xe 0000:00:02.0: [drm] GT1: vcs3 fused off <6>[ 52.342360] xe 0000:00:02.0: [drm] GT1: vcs4 fused off <6>[ 52.342362] xe 0000:00:02.0: [drm] GT1: vcs5 fused off <6>[ 52.342363] xe 0000:00:02.0: [drm] GT1: vcs6 fused off <6>[ 52.342365] xe 0000:00:02.0: [drm] GT1: vcs7 fused off <6>[ 52.342367] xe 0000:00:02.0: [drm] GT1: vecs1 fused off <6>[ 52.342368] xe 0000:00:02.0: [drm] GT1: vecs2 fused off <6>[ 52.342370] xe 0000:00:02.0: [drm] GT1: vecs3 fused off <7>[ 52.342455] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine <7>[ 52.342710] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine <7>[ 52.342979] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine <7>[ 52.344627] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs <7>[ 52.344795] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000 <7>[ 52.344982] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000 <7>[ 52.345149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440 <7>[ 52.345307] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000 <7>[ 52.345462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000 <7>[ 52.345605] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f <7>[ 52.345750] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020 <7>[ 52.345887] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000 <7>[ 52.346014] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 52.346144] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1 <7>[ 52.346271] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16 <7>[ 52.346396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 52.346517] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 52.346635] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 52.346750] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 52.346870] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 52.346983] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 52.347093] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 52.347199] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 52.347304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 52.347406] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 52.347509] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 52.347612] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 52.347714] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 52.347813] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 52.347919] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 52.348013] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 52.348105] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs <7>[ 52.348207] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000 <7>[ 52.348309] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 52.348742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs <7>[ 52.348838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000 <7>[ 52.348949] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 52.349353] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs <7>[ 52.349444] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000 <7>[ 52.349533] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 52.350054] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled <7>[ 52.350192] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df43f7 <7>[ 52.350279] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000 <7>[ 52.350361] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014 <7>[ 52.350440] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001 <7>[ 52.350517] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e12 <7>[ 52.350590] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004 <7>[ 52.350662] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000 <7>[ 52.350731] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000 <7>[ 52.350799] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000 <7>[ 52.350871] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000 <7>[ 52.350952] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000 <7>[ 52.351032] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000 <7>[ 52.351112] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000 <7>[ 52.351186] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000 <7>[ 52.351271] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs <7>[ 52.351369] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells <7>[ 52.352571] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT1: reusable buffer with 2048 dwords at 0x1982000 for xe_guc_init_post_hwconfig [xe] <7>[ 52.370483] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: Updated ADS capture size 24576 (was 45056) <7>[ 52.371650] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00] <7>[ 52.371781] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00] <7>[ 52.391206] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0 <7>[ 52.391627] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled <7>[ 52.392656] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vcs0 WA job: 0 dwords <7>[ 52.392853] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 52.394935] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vecs0 WA job: 0 dwords <7>[ 52.395119] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 52.396972] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC gsccs0 WA job: 0 dwords <7>[ 52.397153] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 52.439806] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC <7>[ 52.440704] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 52.441032] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 1, type 2, Engines: <7>[ 52.441309] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 52.443267] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008 <7>[ 52.443592] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108 <7>[ 52.443927] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208 <7>[ 52.444213] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308 <7>[ 52.444486] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8 <7>[ 52.444748] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008 <7>[ 52.445084] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108 <7>[ 52.445347] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208 <7>[ 52.445604] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308 <7>[ 52.445855] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8 <7>[ 52.446152] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008 <7>[ 52.446399] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108 <7>[ 52.446645] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208 <7>[ 52.446928] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308 <7>[ 52.447169] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8 <7>[ 52.447756] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 52.448042] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 52.448322] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 52.448682] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset] <7>[ 52.449045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset] <7>[ 52.450785] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 52.451067] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 52.461183] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B] <7>[ 52.461583] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C] <7>[ 52.472036] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs <7>[ 52.476796] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered <7>[ 52.477211] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 52.477564] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Panel prepare <7>[ 52.478469] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 52.480402] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event <7>[ 52.480497] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs <7>[ 52.481152] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 52.482032] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event <7>[ 52.482081] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs <7>[ 52.482567] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 52.483261] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event <7>[ 52.483295] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs <7>[ 52.483731] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 52.484797] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event <6>[ 52.484823] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 52.484847] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 52.494318] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 52.497674] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 52.499431] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 52.499571] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 52.499943] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 52.499947] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 52.500829] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 52.501718] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 52.501834] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 52.501880] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 52.502148] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.502281] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 52.502437] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 52.502570] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.502694] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 52.502842] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 52.502994] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 52.503118] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 52.503374] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 52.503490] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping <7>[ 52.503598] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping <7>[ 52.503704] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 52.504010] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 52.504237] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7>[ 52.504244] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7>[ 52.504739] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 52.505075] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 52.505208] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 52.505336] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 52.505525] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 52.505530] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.505531] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.505532] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 52.505534] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.505536] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 52.505539] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.505540] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 52.505543] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.505563] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7>[ 52.505675] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 52.505794] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 52.506300] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] status updated from unknown to connected <5>[ 52.506508] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.506509] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.506511] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.506542] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7>[ 52.506549] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.506554] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7>[ 52.506557] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 52.506647] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 52.506728] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7>[ 52.506732] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7>[ 52.506735] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 52.506892] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7>[ 52.506896] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7>[ 52.506899] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 52.507044] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7>[ 52.507047] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7>[ 52.507049] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7>[ 52.507051] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7>[ 52.507052] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7>[ 52.507145] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 52.507163] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2880x1800 <7>[ 52.507166] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 52.507176] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 52.507254] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 52.507264] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 52.507272] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 52.507262] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 52.509304] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 52.514686] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da3000 <6>[ 52.515654] fbcon: xedrmfb (fb0) is primary device <7>[ 52.517242] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 52.517420] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 52.517542] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 52.517665] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 52.517783] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7>[ 52.517968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 52.518105] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 52.518236] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 52.518365] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 52.518496] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 52.518605] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 52.518713] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 52.518818] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 52.518952] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 52.519080] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 52.519203] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 52.519327] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 52.519450] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 52.519571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 52.519693] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 52.519813] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 52.519941] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 52.520059] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 52.520177] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 52.520293] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 52.520408] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 52.520510] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 52.520607] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 52.520703] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 52.520804] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 52.520952] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7>[ 52.521106] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 52.521222] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 52.521334] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 12, 13, 0, 0, 0, 3, 0 <7>[ 52.521428] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 289, 313, 0, 0, 38, 73, 87 <7>[ 52.521520] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 319, 346, 0, 0, 39, 82, 88 <7>[ 52.521609] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.521711] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.521813] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.521923] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.522024] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.522120] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.522215] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.522317] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.522422] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.522527] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.522619] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.522714] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.522803] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.522900] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.522990] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.523079] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.523168] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 52.523256] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.523349] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.523443] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 52.523542] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1390840 num active planes 1 <7>[ 52.523664] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 52.523792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 52.523927] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 52.524052] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 52.524174] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 52.524345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset] <7>[ 52.524499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 52.524639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 52.524762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 52.524912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 52.525052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 52.525175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 52.525296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 52.525413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 52.525529] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 52.525662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 52.525775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 52.525907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 52.526019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 52.526136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 52.526245] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 52.526356] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 52.526476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 52.526583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 52.526690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 52.526795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 52.526907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0 <7>[ 52.527011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97 <7>[ 52.527115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 52.527216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.527315] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.527403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.527508] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.527619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.527741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710 <7>[ 52.527866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 52.527979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 52.528089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 52.528197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 52.528301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 52.528405] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 52.528507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 52.528608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.528713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.528824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.528934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.529032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.529129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.529226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.529323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.529431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.529550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.529664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 52.529772] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 52.529881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 52.529988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 52.530094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 52.530204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 52.530317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 52.530422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <6>[ 52.545337] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0 <7>[ 52.545486] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed <7>[ 52.546298] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 52.546496] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 52.546638] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 52.546770] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 52.546933] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 52.547055] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 52.547172] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 52.547286] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 52.547398] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 52.547510] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 52.547622] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 52.547735] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 52.547846] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 52.547968] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 52.548086] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 52.548197] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 52.548309] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 52.548420] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 52.548529] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 52.548638] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 52.548746] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 52.548854] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 52.548977] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 52.549088] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 52.549198] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 52.549307] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 52.549415] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 52.549523] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 52.549630] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 52.549738] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 52.549850] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 52.549967] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 52.550081] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 52.550201] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 52.550321] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 52.550436] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 52.551762] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 52.551971] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <6>[ 52.555534] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 52.556308] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 52.559876] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 52.562372] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 52.567867] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC <7>[ 52.759980] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0 <7>[ 52.761115] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 52.781540] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off <7>[ 52.781948] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 52.781976] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 52.782315] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7>[ 52.782330] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 52.834677] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 52.835029] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7>[ 52.843341] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 52.843813] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 52.844672] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 52.844645] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 52.845014] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A] <7>[ 52.845113] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 52.845323] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1] <7>[ 52.845591] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A] <7>[ 52.845849] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B] <7>[ 52.846145] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C] <7>[ 52.846406] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2] <7>[ 52.846659] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A] <7>[ 52.846919] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B] <7>[ 52.847195] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C] <7>[ 52.847440] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3] <7>[ 52.847682] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A] <7>[ 52.847931] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B] <7>[ 52.848155] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C] <7>[ 52.848413] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.850007] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on <7>[ 52.850333] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining) <7>[ 52.867699] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 52.868012] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7>[ 52.868332] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 52.869017] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 52.991658] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed <7>[ 53.352109] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 53.382999] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 53.383452] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 53.383924] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 53.420169] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 53.420480] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7>[ 53.420776] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 53.421102] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 53.520270] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.520270] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.520270] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 53.598401] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 53.600525] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7>[ 53.600883] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 53.603011] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 53.604230] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 53.605043] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 53.606139] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 53.607222] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 53.608200] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 53.608553] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 53.609912] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 53.610251] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 53.611487] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 53.611955] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 53.612277] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 53.612626] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 192000 <7>[ 53.628918] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 53.630626] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1] <7>[ 53.630995] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <7>[ 53.632317] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 53.633577] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 53.634647] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <6>[ 53.635215] Console: switching to colour frame buffer device 180x56 <7>[ 53.635071] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:205:eDP-1] set backlight level = 13892 <6>[ 53.650350] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 53.658936] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 53.659387] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 53.659733] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 53.660491] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 53.660847] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 53.661285] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 53.661658] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 53.662028] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 53.662411] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 53.662732] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 53.663032] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 53.663059] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.663195] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 53.663715] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7>[ 53.663537] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 53.663739] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7>[ 53.663898] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 53.664207] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 53.664497] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 53.664779] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 53.664940] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.665086] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 53.665462] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 53.665603] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.665783] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 53.666042] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.666141] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 53.666458] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 53.666416] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.666775] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 53.667267] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.667282] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.667285] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.667288] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.667295] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.667298] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 53.667315] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.667317] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 53.667323] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.667365] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7>[ 53.667681] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.667951] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 53.667988] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.668253] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 53.668594] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 53.668985] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 53.669391] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 53.669720] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <5>[ 53.670791] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.670796] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.670798] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.670889] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7>[ 53.670910] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.670922] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7>[ 53.670930] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 53.671409] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 53.671813] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 53.672196] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 53.672500] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.672765] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7>[ 53.672772] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7>[ 53.672778] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 53.673050] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.673276] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7>[ 53.673282] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7>[ 53.673286] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 53.673534] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.673750] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7>[ 53.673755] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7>[ 53.673759] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7>[ 53.673761] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7>[ 53.673763] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7>[ 53.673954] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.673986] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2880x1800 <7>[ 53.673990] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 53.674039] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.674580] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 53.676003] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 53.676367] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 53.680261] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 53.695935] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 53.696155] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 53.696338] [IGT] xe_module_load: exiting, ret=0 <7>[ 53.777139] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 53.777281] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 53.777483] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.736017] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.736004] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.736007] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 56.209452] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD off <7>[ 56.209911] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067