<5>[ 0.000000] Linux version 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Sep 11 19:43:08 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/CPU: Model not found in latest microcode list <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f6c018 ESRT=0x68f7da98 MOKvar=0x6cd0c000 <6>[ 0.000000] efi: Remove mem275: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem277: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D96.2504232223 04/23/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000011] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000013] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000017] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000020] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000021] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000380] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000381] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004874] esrt: Reserving ESRT space from 0x0000000068f7da98 to 0x0000000068f7dbe8. <7>[ 0.004882] e820: update [mem 0x68f7d000-0x68f7dfff] usable ==> reserved <6>[ 0.004901] Using GB pages for direct mapping <6>[ 0.005541] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005542] printk: early log buf free: 258752(98%) <6>[ 0.005543] Secure boot disabled <6>[ 0.005544] ACPI: Early table checksum verification disabled <6>[ 0.005547] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005550] ACPI: XSDT 0x000000006FF70228 00019C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005553] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005556] ACPI: DSDT 0x000000006FFB6000 025547 (v02 INTEL LNL 00000002 01000013) <6>[ 0.005558] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005560] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005561] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005563] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005564] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005565] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005567] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005568] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005569] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005571] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005572] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005573] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005575] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005576] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005578] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005579] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005580] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005582] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005584] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005585] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005587] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005588] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005589] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005591] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005592] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005593] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005594] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005596] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005597] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005598] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005600] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005601] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005602] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005603] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005605] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005606] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005607] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005609] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005610] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005611] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005613] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005614] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005615] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005617] ACPI: ASF! 0x000000006FF61000 000074 (v32 INTEL LNL 00000002 01000013) <6>[ 0.005618] ACPI: PHAT 0x000000006FF60000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005619] ACPI: BGRT 0x000000006FF5F000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005620] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005621] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb546] <6>[ 0.005622] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005625] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005627] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005628] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005628] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005628] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005630] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005630] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005630] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005631] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005631] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005631] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005632] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005632] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005633] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005633] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005633] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005634] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005634] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005634] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005635] ACPI: Reserving ASF! table memory at [mem 0x6ff61000-0x6ff61073] <6>[ 0.005635] ACPI: Reserving PHAT table memory at [mem 0x6ff60000-0x6ff607bf] <6>[ 0.005635] ACPI: Reserving BGRT table memory at [mem 0x6ff5f000-0x6ff5f037] <6>[ 0.005710] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005910] No NUMA configuration found <6>[ 0.005910] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005915] NODE_DATA(0) allocated [mem 0x87f352e80-0x87f37dfff] <6>[ 0.006030] Zone ranges: <6>[ 0.006031] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006032] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006032] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006033] Device empty <6>[ 0.006034] Movable zone start for each node <6>[ 0.006034] Early memory node ranges <6>[ 0.006035] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006035] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006036] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006036] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006038] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006042] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006056] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007668] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035558] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035565] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036022] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.036028] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036079] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036080] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036081] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036084] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036085] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036095] e820: update [mem 0x68f28000-0x68f42fff] usable ==> reserved <6>[ 0.036102] TSC deadline timer available <6>[ 0.036103] CPU topo: Max. logical packages: 1 <6>[ 0.036104] CPU topo: Max. logical dies: 1 <6>[ 0.036104] CPU topo: Max. dies per package: 1 <6>[ 0.036106] CPU topo: Max. threads per core: 1 <6>[ 0.036106] CPU topo: Num. cores per package: 8 <6>[ 0.036106] CPU topo: Num. threads per package: 8 <6>[ 0.036107] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036119] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036120] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036121] PM: hibernation: Registered nosave memory: [mem 0x68f28000-0x68f42fff] <6>[ 0.036122] PM: hibernation: Registered nosave memory: [mem 0x68f7d000-0x68f7dfff] <6>[ 0.036123] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036124] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036125] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036126] Booting paravirtualized kernel on bare hardware <6>[ 0.036128] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036136] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036468] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.036472] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036474] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036488] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036586] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036592] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.036606] random: crng init done <6>[ 0.038428] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039333] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039395] software IO TLB: area num 8. <6>[ 0.046780] Fallback order for Node 0: 0 <6>[ 0.046783] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046784] Policy zone: Normal <6>[ 0.046793] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046794] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046797] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047728] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.080115] ********************************************************** <4>[ 0.080116] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080117] ** ** <4>[ 0.080117] ** This system shows unhashed kernel memory addresses ** <4>[ 0.080117] ** via the console, logs, and other interfaces. This ** <4>[ 0.080117] ** might reduce the security of your system. ** <4>[ 0.080118] ** ** <4>[ 0.080118] ** If you see this message and you are not debugging ** <4>[ 0.080118] ** the kernel, report this immediately to your system ** <4>[ 0.080118] ** administrator! ** <4>[ 0.080118] ** ** <4>[ 0.080118] ** Use hash_pointers=always to force this mode off ** <4>[ 0.080119] ** ** <4>[ 0.080119] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080119] ********************************************************** <6>[ 0.081173] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089402] ftrace: allocating 60429 entries in 238 pages <6>[ 0.089404] ftrace: allocated 238 pages with 6 groups <6>[ 0.090769] Dynamic Preempt: voluntary <6>[ 0.091268] Running RCU self tests <6>[ 0.091268] Running RCU synchronous self tests <6>[ 0.091269] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.091269] rcu: RCU lockdep checking is enabled. <6>[ 0.091270] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.091271] Trampoline variant of Tasks RCU enabled. <6>[ 0.091271] Rude variant of Tasks RCU enabled. <6>[ 0.091271] Tracing variant of Tasks RCU enabled. <6>[ 0.091271] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.091272] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091316] Running RCU synchronous self tests <6>[ 0.091319] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091322] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091325] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101337] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.101787] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102193] Console: colour dummy device 80x25 <6>[ 0.102202] printk: legacy console [tty0] enabled <6>[ 0.103391] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103398] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103402] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103406] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103409] ... CLASSHASH_SIZE: 4096 <6>[ 0.103413] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103417] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103420] ... CHAINHASH_SIZE: 262144 <6>[ 0.103424] memory used by lock dependency info: 54145 kB <6>[ 0.103428] memory used for stack traces: 4224 kB <6>[ 0.103432] per task-struct memory footprint: 1920 bytes <6>[ 0.103480] ACPI: Core revision 20250404 <6>[ 0.104337] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104399] APIC: Switch to symmetric I/O mode setup <6>[ 0.104405] DMAR: Host address width 38 <6>[ 0.104408] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104443] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104478] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104501] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104525] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104546] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104580] DMAR: SATC flags: 0x1 <6>[ 0.104590] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104596] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104600] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.106662] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111852] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.111870] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.111946] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.111952] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112131] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112135] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112145] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.112158] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112166] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112171] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112179] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112196] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112204] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112209] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112213] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112219] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112225] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.112231] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112236] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112241] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112246] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.112251] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.112865] Freeing SMP alternatives memory: 56K <6>[ 0.112865] pid_max: default: 32768 minimum: 301 <6>[ 0.112865] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.112865] landlock: Up and running. <6>[ 0.112865] Yama: becoming mindful. <6>[ 0.112865] AppArmor: AppArmor initialized <6>[ 0.112865] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112865] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112865] Running RCU synchronous self tests <6>[ 0.112865] Running RCU synchronous self tests <6>[ 0.112865] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.112865] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.112865] core: cpu_core PMU driver: <6>[ 0.112865] ... version: 6 <6>[ 0.112865] ... bit width: 48 <6>[ 0.112865] ... generic registers: 10 <6>[ 0.112865] ... value mask: 0000ffffffffffff <6>[ 0.112865] ... max period: 00007fffffffffff <6>[ 0.112865] ... fixed-purpose events: 4 <6>[ 0.112865] ... event mask: 0001000f000003ff <6>[ 0.112881] signal: max sigframe size: 3632 <6>[ 0.112904] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113001] rcu: Hierarchical SRCU implementation. <6>[ 0.113005] rcu: Max phase no-delay instances is 400. <6>[ 0.113148] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.114853] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115169] smp: Bringing up secondary CPUs ... <6>[ 0.115522] smpboot: x86: Booting SMP configuration: <6>[ 0.115528] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010896] core: cpu_atom PMU driver: <6>[ 0.010896] ... version: 6 <6>[ 0.010896] ... bit width: 48 <6>[ 0.010896] ... generic registers: 8 <6>[ 0.010896] ... value mask: 0000ffffffffffff <6>[ 0.010896] ... max period: 00007fffffffffff <6>[ 0.010896] ... fixed-purpose events: 6 <6>[ 0.010896] ... event mask: 00000077000000ff <6>[ 0.122009] smp: Brought up 1 node, 8 CPUs <6>[ 0.123192] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.124966] Memory: 32358768K/33158528K available (25252K kernel code, 5635K rwdata, 9504K rodata, 5672K init, 68284K bss, 777192K reserved, 0K cma-reserved) <6>[ 0.125867] devtmpfs: initialized <6>[ 0.126158] x86/mm: Memory block size: 128MB <6>[ 0.146909] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.147425] Running RCU synchronous self tests <6>[ 0.147438] Running RCU synchronous self tests <6>[ 0.148132] Running RCU Tasks wait API self tests <6>[ 0.148132] Running RCU Tasks Rude wait API self tests <6>[ 0.148877] Running RCU Tasks Trace wait API self tests <6>[ 0.161903] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.162333] posixtimers hash table entries: 4096 (order: 6, 294912 bytes, linear) <6>[ 0.163087] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.163438] pinctrl core: initialized pinctrl subsystem <6>[ 0.164151] PM: RTC time: 01:58:29, date: 2025-09-12 <6>[ 0.164908] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.165887] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.166199] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.166475] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.166530] audit: initializing netlink subsys (disabled) <5>[ 0.166873] audit: type=2000 audit(1757642308.055:1): state=initialized audit_enabled=0 res=1 <6>[ 0.167631] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.167633] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.167640] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.167645] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.167650] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.167690] cpuidle: using governor ladder <6>[ 0.167690] cpuidle: using governor menu <6>[ 0.167933] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.168355] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.168382] PCI: Using configuration type 1 for base access <6>[ 0.168501] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.170389] HugeTLB: allocation took 0ms with hugepage_allocation_threads=2 <6>[ 0.170389] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.170389] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.170389] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.170389] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.174087] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.174093] raid6: using avx2x2 recovery algorithm <6>[ 0.174661] fbcon: Taking over console <6>[ 0.174808] ACPI: Added _OSI(Module Device) <6>[ 0.174813] ACPI: Added _OSI(Processor Device) <6>[ 0.174818] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.180901] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.684934] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.707521] ACPI: EC: EC started <6>[ 0.707547] ACPI: EC: interrupt blocked <6>[ 0.711951] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.711961] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.789431] Callback from call_rcu_tasks() invoked. <6>[ 1.048706] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.048726] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.121769] ACPI: Interpreter enabled <6>[ 1.121977] ACPI: PM: (supports S0 S4 S5) <6>[ 1.121988] ACPI: Using IOAPIC for interrupt routing <6>[ 1.136238] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.136257] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.179893] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.179963] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.281513] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.282528] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.291221] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.782912] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.820267] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.985379] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.988455] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 2.001060] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 2.016838] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 2.017366] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 2.017789] ACPI: \_SB_.PC00.D3C_: New power resource <3>[ 2.082871] ACPI: \: Can't tag data node <3>[ 2.084043] ACPI: \: Can't tag data node <3>[ 2.085210] ACPI: \: Can't tag data node <3>[ 2.086678] ACPI: \: Can't tag data node <3>[ 2.087825] ACPI: \: Can't tag data node <6>[ 2.304573] ACPI: \_TZ_.FN00: New power resource <6>[ 2.306035] ACPI: \_TZ_.FN01: New power resource <6>[ 2.306885] ACPI: \_TZ_.FN02: New power resource <6>[ 2.307728] ACPI: \_TZ_.FN03: New power resource <6>[ 2.308590] ACPI: \_TZ_.FN04: New power resource <6>[ 2.311128] ACPI: \PIN_: New power resource <6>[ 2.317268] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.317297] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.322491] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.337598] PCI host bridge to bus 0000:00 <6>[ 2.337660] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.337674] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.337686] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.337699] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.337712] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.337727] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.342496] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.343532] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.343628] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.343641] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.343654] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.343711] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.346131] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.346164] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.348140] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.348174] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.348185] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.350036] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.350078] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.350092] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.350112] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.350233] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.350333] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.357386] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.357431] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.357446] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.357466] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.357590] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.357674] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.364429] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.364471] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.364485] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.364505] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.364624] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.364914] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.371893] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.371934] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.371951] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.372308] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.372340] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.372351] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.373432] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.373488] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.373871] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.376537] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.376595] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.376607] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.376677] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.376684] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.377767] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.377822] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.377834] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.377904] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.377911] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.380039] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.380099] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.380176] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.384244] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.384335] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.384442] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.385525] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.385581] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.385658] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.388706] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.388772] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.388785] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.389569] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.389678] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.405336] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.405455] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.419659] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.419747] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.443867] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.443970] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.461269] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.461390] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.461533] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.466685] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.466765] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027] <6>[ 2.466775] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff] <6>[ 2.467175] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.467212] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.467223] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.467234] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.467374] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.467472] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.474998] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.475093] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.475137] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.475484] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.475725] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.483865] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.485900] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.486021] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.486040] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.486166] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.487044] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.487115] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.487131] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.489106] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.489231] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.489592] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.489656] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff] <6>[ 2.489732] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.492006] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.492255] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.492503] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.492869] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.492869] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.492869] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.492869] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.493089] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.493096] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.494039] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.496979] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.497540] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.497595] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.499497] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.499580] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.914750] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 12.862074] Low-power S0 idle used by default for system suspend <6>[ 12.915521] ACPI: EC: interrupt unblocked <6>[ 12.915533] ACPI: EC: event unblocked <6>[ 12.915568] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 12.915574] ACPI: EC: GPE=0x6e <6>[ 12.915580] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 12.915589] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 12.916905] iommu: Default domain type: Translated <6>[ 12.916905] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 12.919172] SCSI subsystem initialized <7>[ 12.919205] libata version 3.00 loaded. <6>[ 12.919205] ACPI: bus type USB registered <6>[ 12.919205] usbcore: registered new interface driver usbfs <6>[ 12.919205] usbcore: registered new interface driver hub <6>[ 12.919232] usbcore: registered new device driver usb <6>[ 12.920540] pps_core: LinuxPPS API ver. 1 registered <6>[ 12.920545] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 12.920568] PTP clock support registered <6>[ 12.921127] EDAC MC: Ver: 3.0.0 <6>[ 12.923041] efivars: Registered efivars operations <6>[ 12.925224] NetLabel: Initializing <6>[ 12.925228] NetLabel: domain hash size = 128 <6>[ 12.925232] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 12.925308] NetLabel: unlabeled traffic allowed by default <6>[ 12.925324] mctp: management component transport protocol core <6>[ 12.925329] NET: Registered PF_MCTP protocol family <6>[ 12.925381] PCI: Using ACPI for IRQ routing <7>[ 12.944893] PCI: pci_cache_line_size set to 64 bytes <6>[ 12.945139] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 12.945230] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 12.945240] e820: reserve RAM buffer [mem 0x68f28000-0x6bffffff] <7>[ 12.945243] e820: reserve RAM buffer [mem 0x68f7d000-0x6bffffff] <7>[ 12.945246] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 12.945248] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 12.945903] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 12.945914] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 12.945919] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 12.945933] vgaarb: loaded <7>[ 12.947670] Monitor-Mwait will be used to enter C-1 state <7>[ 12.947685] Monitor-Mwait will be used to enter C-2 state <7>[ 12.947690] Monitor-Mwait will be used to enter C-3 state <6>[ 12.962168] clocksource: Switched to clocksource tsc-early <5>[ 12.963284] VFS: Disk quotas dquot_6.6.0 <6>[ 12.963308] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 12.964722] AppArmor: AppArmor Filesystem Enabled <6>[ 12.964901] pnp: PnP ACPI init <6>[ 12.965741] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 12.965753] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 12.967128] system 00:02: [io 0x06a4] has been reserved <6>[ 12.967137] system 00:02: [io 0x06a0] has been reserved <6>[ 12.986468] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 12.986479] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 12.986490] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 12.986498] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 12.986506] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 12.986515] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 12.986525] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 12.986532] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 12.989765] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 12.992987] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 12.993151] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 12.997364] pnp: PnP ACPI: found 8 devices <6>[ 13.032820] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 13.033430] NET: Registered PF_INET protocol family <6>[ 13.033761] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.039365] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 13.039804] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 13.040184] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.041575] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 13.044683] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 13.045426] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.047085] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.048801] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 13.048957] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 13.048986] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 13.049009] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 13.049098] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned <6>[ 13.049115] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned <6>[ 13.049131] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned <6>[ 13.049149] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 13.049206] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 13.049260] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 13.049314] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 13.049368] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 13.049440] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 13.049461] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff] <6>[ 13.049481] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 13.049506] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.049534] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 13.049549] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff] <6>[ 13.049570] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 13.049589] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.049617] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 13.049631] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff] <6>[ 13.049652] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 13.049671] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.049699] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 13.049712] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 13.049731] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 13.049759] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 13.049805] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 13.049867] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 13.049882] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 13.049896] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 13.049917] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 13.049932] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 13.049948] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff] <6>[ 13.049961] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 13.049974] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.049991] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff] <6>[ 13.050004] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 13.050017] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.050033] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff] <6>[ 13.050046] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 13.050059] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.050076] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 13.050088] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 13.050102] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 13.052449] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 13.055743] PCI: CLS 0 bytes, default 64 <6>[ 13.055972] DMAR: No RMRR found <6>[ 13.055993] DMAR: No ATSR found <6>[ 13.056002] DMAR: dmar1: Using Queued invalidation <6>[ 13.056018] DMAR: dmar0: Using Queued invalidation <6>[ 13.056031] DMAR: dmar2: Using Queued invalidation <6>[ 13.058260] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 13.058495] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 13.058681] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 13.058842] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 13.066228] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 13.069766] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 13.069946] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 13.070102] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 13.070262] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 13.070484] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 13.070595] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 13.070702] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 13.070879] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 13.071055] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 13.071249] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 13.071363] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 13.071601] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 13.071718] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 13.071833] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 13.071963] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 13.072163] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 13.072280] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 13.072438] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 13.072613] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 13.072870] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 13.072999] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 13.073120] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 13.073238] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 13.073360] pci 0000:00:1f.6: Adding to iommu group 17 <6>[ 13.073512] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 13.073692] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 13.093638] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 13.093655] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 13.093669] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 13.098951] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 13.099147] clocksource: Switched to clocksource tsc <6>[ 13.099366] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 13.110771] Initialise system trusted keyrings <5>[ 13.110889] Key type blacklist registered <6>[ 13.111698] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 13.127618] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 13.127884] ntfs3: Enabled Linux POSIX ACLs support <6>[ 13.127896] ntfs3: Read-only LZX/Xpress compression included <5>[ 13.128701] integrity: Platform Keyring initialized <5>[ 13.128737] integrity: Machine keyring initialized <6>[ 13.139969] xor: automatically using best checksumming function avx <5>[ 13.139985] Key type asymmetric registered <5>[ 13.140003] Asymmetric key parser 'x509' registered <6>[ 13.140171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 13.141110] io scheduler mq-deadline registered <6>[ 13.143218] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 13.145754] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 13.146665] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 13.148678] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 13.149354] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 13.151377] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 13.152088] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 13.153928] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 13.154622] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 13.157136] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 13.157858] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 13.160868] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 13.161215] ACPI: button: Lid Switch [LID0] <6>[ 13.161693] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 13.162032] ACPI: button: Sleep Button [SLPB] <6>[ 13.162458] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 13.163086] ACPI: button: Power Button [PWRB] <6>[ 13.347115] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 13.347138] ACPI: thermal: Thermal Zone [TZ00] (57 C) <6>[ 13.348647] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 13.349696] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 13.351878] ACPI: battery: Slot [BAT0] (battery present) <6>[ 13.376103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 13.415050] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 13.417948] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 13.443168] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 13.448318] hpet_acpi_add: no address or irqs in _CRS <6>[ 13.448558] Linux agpgart interface v0.103 <6>[ 13.450538] ACPI: bus type drm_connector registered <7>[ 13.460653] initcall simpledrm_platform_driver_init blacklisted <6>[ 13.488793] loop: module loaded <6>[ 13.562891] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 13.704530] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 13.817533] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 13.930116] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 14.043339] Key type psk registered <6>[ 14.047297] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 14.048028] nvme nvme0: pci function 0000:80:00.0 <6>[ 14.048712] tun: Universal TUN/TAP device driver, 1.6 <6>[ 14.049760] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.049873] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 14.051802] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.054491] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.054528] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 14.054562] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.055469] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17 <6>[ 14.055542] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.055553] usb usb1: Product: xHCI Host Controller <6>[ 14.055562] usb usb1: Manufacturer: Linux 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ xhci-hcd <6>[ 14.055575] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 14.057263] hub 1-0:1.0: USB hub found <6>[ 14.057369] hub 1-0:1.0: 1 port detected <6>[ 14.061350] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17 <6>[ 14.061366] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.061377] usb usb2: Product: xHCI Host Controller <6>[ 14.061385] usb usb2: Manufacturer: Linux 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ xhci-hcd <6>[ 14.061396] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 14.062245] hub 2-0:1.0: USB hub found <6>[ 14.062298] hub 2-0:1.0: 3 ports detected <6>[ 14.084437] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 14.087858] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.087901] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 14.089833] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.092159] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.092185] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 14.092204] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.092430] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.17 <6>[ 14.092445] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.092455] usb usb3: Product: xHCI Host Controller <6>[ 14.092462] usb usb3: Manufacturer: Linux 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ xhci-hcd <6>[ 14.092475] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 14.093415] hub 3-0:1.0: USB hub found <6>[ 14.093468] hub 3-0:1.0: 8 ports detected <6>[ 14.101865] nvme0n1: p1 p2 <6>[ 14.125930] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.17 <6>[ 14.125954] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.125965] usb usb4: Product: xHCI Host Controller <6>[ 14.125973] usb usb4: Manufacturer: Linux 6.17.0-rc5-lgci-xe-xe-3729-a433a14cc397ef049+ xhci-hcd <6>[ 14.125985] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 14.126811] hub 4-0:1.0: USB hub found <6>[ 14.126861] hub 4-0:1.0: 2 ports detected <6>[ 14.134461] usbcore: registered new interface driver usb-storage <6>[ 14.134696] usbcore: registered new interface driver usbserial_generic <6>[ 14.134839] usbserial: USB Serial support registered for generic <6>[ 14.134932] usbcore: registered new interface driver ftdi_sio <6>[ 14.134976] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 14.135055] usbcore: registered new interface driver pl2303 <6>[ 14.135094] usbserial: USB Serial support registered for pl2303 <6>[ 14.135247] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 14.135258] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 14.843704] i8042: Can't read CTR while initializing i8042 <3>[ 14.843720] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 14.844275] mousedev: PS/2 mouse device common for all mice <6>[ 14.845358] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 14.847408] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 14.847629] rtc_cmos rtc_cmos: setting system clock to 2025-09-12T01:58:43 UTC (1757642323) <6>[ 14.847823] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 14.847878] i2c_dev: i2c /dev entries driver <6>[ 14.857289] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 14.857392] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 14.857474] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 14.857708] device-mapper: uevent: version 1.0.3 <6>[ 14.859646] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 14.859758] intel_pstate: Intel P-state driver initializing <6>[ 14.862564] Hybrid CPU capacity scaling enabled <6>[ 14.862812] processor cpu0: EM: created perf domain <6>[ 14.863031] processor cpu1: EM: created perf domain <6>[ 14.863207] processor cpu2: EM: created perf domain <6>[ 14.863389] processor cpu3: EM: created perf domain <6>[ 14.863573] processor cpu4: EM: created perf domain <6>[ 14.863757] processor cpu5: EM: created perf domain <6>[ 14.863956] processor cpu6: EM: created perf domain <6>[ 14.864145] processor cpu7: EM: created perf domain <6>[ 14.865118] intel_pstate: HWP enabled <6>[ 14.865125] sdhci: Secure Digital Host Controller Interface driver <6>[ 14.865131] sdhci: Copyright(c) Pierre Ossman <6>[ 14.865303] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 14.868747] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 14.869820] drop_monitor: Initializing network drop monitor service <6>[ 14.870075] NET: Registered PF_INET6 protocol family <6>[ 14.871313] Segment Routing with IPv6 <6>[ 14.871355] In-situ OAM (IOAM) with IPv6 <6>[ 14.871404] NET: Registered PF_PACKET protocol family <5>[ 14.871609] Key type dns_resolver registered <4>[ 14.875673] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 14.876047] microcode: Current revision: 0x00000121 <6>[ 14.876699] IPI shorthand broadcast: enabled <6>[ 14.890855] sched_clock: Marking stable (14880001132, 9896366)->(14973848058, -83950560) <6>[ 14.891595] registered taskstats version 1 <5>[ 14.893311] Loading compiled-in X.509 certificates <6>[ 14.936328] Demotion targets for Node 0: null <6>[ 14.936508] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 14.936515] kmemleak: Automatic memory scanning thread started <5>[ 14.936727] Key type .fscrypt registered <5>[ 14.936733] Key type fscrypt-provisioning registered <6>[ 14.939971] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 14.942297] Key type encrypted registered <6>[ 14.942304] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 14.942383] ima: No TPM chip found, activating TPM-bypass! <5>[ 14.942395] Loading compiled-in module X.509 certificates <5>[ 14.942958] Loaded X.509 cert 'Build time autogenerated kernel key: 19fb72be55b55e6161fac5669084e96104ea9ebc' <6>[ 14.942969] ima: Allocated hash algorithm: sha256 <6>[ 14.943014] ima: No architecture policies found <6>[ 14.943092] evm: Initialising EVM extended attributes: <6>[ 14.943096] evm: security.selinux <6>[ 14.943099] evm: security.SMACK64 <6>[ 14.943102] evm: security.SMACK64EXEC <6>[ 14.943105] evm: security.SMACK64TRANSMUTE <6>[ 14.943108] evm: security.SMACK64MMAP <6>[ 14.943111] evm: security.apparmor <6>[ 14.943114] evm: security.ima <6>[ 14.943116] evm: security.capability <6>[ 14.943119] evm: HMAC attrs: 0x1 <6>[ 14.944996] PM: Magic number: 9:465:963 <6>[ 14.945094] acpi EEP0004:00: hash matches <6>[ 14.945194] netconsole: network logging started <6>[ 14.945721] RAS: Correctable Errors collector initialized. <6>[ 14.946227] clk: Disabling unused clocks <6>[ 14.946240] PM: genpd: Disabling unused power domains <4>[ 14.946690] check access for rdinit=/init failed: -2, ignoring <6>[ 14.946697] md: Waiting for all devices to be available before autodetect <6>[ 14.946703] md: If you don't use raid, use raid=noautodetect <6>[ 14.946708] md: Autodetecting RAID arrays. <6>[ 14.946715] md: autorun ... <6>[ 14.946718] md: ... autorun DONE. <6>[ 14.991303] EXT4-fs (nvme0n1p2): mounted filesystem 7dfac1f5-10ea-4066-a63e-e14654e0601e ro with ordered data mode. Quota mode: none. <6>[ 14.991376] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 14.991874] devtmpfs: mounted <6>[ 15.004121] Freeing unused decrypted memory: 2028K <6>[ 15.005038] Freeing unused kernel image (initmem) memory: 5672K <6>[ 15.005061] Write protecting the kernel read-only data: 36864k <6>[ 15.005743] Freeing unused kernel image (text/rodata gap) memory: 1368K <6>[ 15.005962] Freeing unused kernel image (rodata/data gap) memory: 736K <6>[ 15.011006] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 15.011216] Run /sbin/init as init process <7>[ 15.011220] with arguments: <7>[ 15.011221] /sbin/init <7>[ 15.011221] with environment: <7>[ 15.011222] HOME=/ <7>[ 15.011223] TERM=linux <7>[ 15.011223] BOOT_IMAGE=/boot/drm_intel <7>[ 15.057037] systemd[1]: Inserted module 'autofs4' <7>[ 15.072407] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 15.072439] systemd[1]: Detected architecture x86-64. <7>[ 15.073704] systemd[1]: Hostname set to . <7>[ 15.351725] systemd[1]: Queued start job for default target graphical.target. <7>[ 15.386691] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 15.390251] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 15.392386] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 15.392705] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 15.393503] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 15.393632] systemd[1]: Expecting device dev-disk-by\x2duuid-BB9D\x2d0E2E.device - /dev/disk/by-uuid/BB9D-0E2E... <7>[ 15.393727] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 15.393817] systemd[1]: Reached target slices.target - Slice Units. <7>[ 15.393889] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 15.393969] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 15.394043] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 15.394295] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 15.394673] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 15.394951] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 15.395283] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 15.395537] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 15.395737] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 15.396034] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 15.396351] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 15.396622] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 15.396795] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.397299] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 15.397602] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 15.414426] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 15.418960] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 15.422099] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 15.424808] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 15.430922] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 15.433965] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 15.437180] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 15.440379] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 15.442927] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 15.446749] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 15.450855] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 15.451833] systemd-journald[203]: Collecting audit messages is disabled. <7>[ 15.454468] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 15.458642] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 15.463281] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 15.467548] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 15.467757] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 15.471636] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 15.473252] pstore: Using crash dump compression: deflate <6>[ 15.475306] pstore: Registered efi_pstore as persistent store backend <7>[ 15.478293] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 15.478406] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.478489] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.483264] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <6>[ 15.483305] fuse: init (API version 7.44) <7>[ 15.490892] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 15.622442] EXT4-fs (nvme0n1p2): re-mounted 7dfac1f5-10ea-4066-a63e-e14654e0601e r/w. <6>[ 15.648602] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:320602112k SS <7>[ 15.659932] systemd-journald[203]: Received client request to flush runtime journal. <7>[ 15.675120] systemd-journald[203]: /var/log/journal/d99f231fc73949389b52e126c183b290/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 15.675140] systemd-journald[203]: Rotating system journal. <4>[ 16.375950] nvme nvme0: using unchecked data buffer <6>[ 16.522569] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 16.557329] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 16.641635] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 16.654467] intel-hid INTC107B:00: platform supports 5 button array <5>[ 16.655071] audit: type=1400 audit(1757642325.306:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=420 comm="apparmor_parser" <5>[ 16.655837] audit: type=1400 audit(1757642325.306:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=418 comm="apparmor_parser" <5>[ 16.657685] audit: type=1400 audit(1757642325.308:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=421 comm="apparmor_parser" <5>[ 16.658176] audit: type=1400 audit(1757642325.309:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=419 comm="apparmor_parser" <5>[ 16.661987] audit: type=1400 audit(1757642325.313:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=423 comm="apparmor_parser" <5>[ 16.664771] audit: type=1400 audit(1757642325.315:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=424 comm="apparmor_parser" <5>[ 16.667176] audit: type=1400 audit(1757642325.318:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=425 comm="apparmor_parser" <5>[ 16.669997] audit: type=1400 audit(1757642325.321:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=426 comm="apparmor_parser" <5>[ 16.670322] audit: type=1400 audit(1757642325.321:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=427 comm="apparmor_parser" <5>[ 16.674223] audit: type=1400 audit(1757642325.325:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=428 comm="apparmor_parser" <6>[ 16.676422] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <3>[ 16.714907] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 16.735691] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 17.115707] pci 0000:00:05.0: Setting to D3hot <6>[ 17.126947] pci 0000:00:0b.0: Setting to D3hot <4>[ 17.139013] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 17.139236] intel_pmc_core INT33A1:00: initialized <6>[ 17.141301] ACPI: bus type thunderbolt registered <6>[ 17.166650] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 17.181067] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 17.181072] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 17.189693] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 17.190657] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 17.206069] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 17.206075] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 17.211558] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) <6>[ 17.212916] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 17.230861] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 17.244782] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 17.251061] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 17.273982] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 17.308303] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 17.315848] intel_rapl_common: Found RAPL domain package <6>[ 17.315852] intel_rapl_common: Found RAPL domain dram <6>[ 17.364764] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 17.364769] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 17.364770] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 17.364771] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 17.364772] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 17.390739] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 17.398661] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a5:0e:fc, XID 541, IRQ 176 <6>[ 17.398666] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 17.430495] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 17.431796] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 17.474076] block nvme0n1: No UUID available providing old NGUID <6>[ 17.654709] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 17.871144] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 17.911009] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 17.922319] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.932105] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.941750] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 17.941760] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 17.941762] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 17.982932] loop0: detected capacity change from 0 to 8 <6>[ 17.986301] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.989781] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.993813] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:30:95 <6>[ 17.993817] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 17.993937] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 18.001083] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.120249] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.157310] intel_rapl_common: Found RAPL domain package <6>[ 18.157316] intel_rapl_common: Found RAPL domain core <6>[ 18.157319] intel_rapl_common: Found RAPL domain dram <6>[ 18.157321] intel_rapl_common: Found RAPL domain psys <6>[ 18.190869] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.191510] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 18.260456] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 18.262572] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1 <5>[ 18.270064] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 18.270087] 0x000000000000-0x000002000000 : "BIOS" <6>[ 18.279881] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.329097] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.414823] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 18.538702] Consider using thermal netlink events interface <6>[ 18.571189] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 18.948499] hid: raw HID events driver (C) Jiri Kosina <6>[ 18.955456] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 18.966130] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.987492] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.991576] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.993060] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.993169] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.994945] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.995089] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.995743] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.996997] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.997192] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.997909] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.001231] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.004372] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.007380] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.009866] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.012689] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.015155] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.018600] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.018978] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.021997] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.022574] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.025414] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.025760] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.027786] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.104630] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.111885] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.116868] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.121657] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.127011] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.132461] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.137423] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.141992] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.147460] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.152891] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.157771] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.163233] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.168438] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.174634] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.179317] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.184576] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.191193] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.196528] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.203242] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.208267] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.720180] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 20.720235] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 20.720276] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 21.740935] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 21.740976] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 21.741012] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 24.031735] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 29.268753] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 29.272819] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 36.887736] systemd-journald[203]: /var/log/journal/d99f231fc73949389b52e126c183b290/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 52.104799] [IGT] xe_module_load: executing <4>[ 52.104929] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 52.116287] [IGT] xe_module_load: starting subtest load <5>[ 52.357103] Setting dangerous option force_probe - tainting kernel <6>[ 52.360205] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 52.361920] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 52.361933] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 52.362072] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 52.362194] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 52.364077] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 52.364253] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 52.364361] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 52.364469] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 52.364583] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 52.364682] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 52.364776] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 52.364864] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 52.364955] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 52.365077] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 52.365183] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 52.365308] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 52.365409] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 52.365506] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 52.365606] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 52.365713] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 52.365842] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 52.365986] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 52.366112] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 52.366237] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 52.366352] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.366454] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.366558] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 52.366660] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.366761] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.366859] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.366971] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 52.367084] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.367195] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.367290] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.367396] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 52.367501] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.367606] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.367701] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.367782] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 52.367860] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.367953] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.368055] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.368155] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 52.368248] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 52.368327] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 52.368406] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 52.368510] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 52.368947] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 52.369089] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 52.369210] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 52.369318] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 52.369410] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 52.369495] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 52.369581] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 52.369666] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 52.369748] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 52.369839] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 52.369978] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 52.370109] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 52.370234] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 52.370324] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 52.370418] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 52.370500] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 52.370578] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 52.370656] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 52.370736] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.370816] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.370896] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 52.371006] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 52.371118] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 52.371229] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.371313] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.371391] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 52.371475] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 52.371581] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.371715] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 52.371844] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.372168] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 52.372344] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 52.372466] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 52.372566] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.372671] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 52.372809] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 52.372912] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 52.372930] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 52.373084] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 52.373220] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 52.373327] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 52.373524] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 52.373927] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 52.374394] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 52.374505] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 52.374597] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 6 (6.0 usec) <7>[ 52.374681] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 106 (106.0 usec) <7>[ 52.374763] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 106 (106.0 usec) <7>[ 52.374844] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 106 (106.0 usec) <7>[ 52.374931] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 99 (99.0 usec) <7>[ 52.375035] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 106 (106.0 usec) <7>[ 52.376984] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 52.377145] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 52.377257] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 52.377358] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 52.377454] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 52.377550] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP) <7>[ 52.377649] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 52.377740] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 52.377830] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.377982] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 52.378100] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.378215] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 52.378325] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.378428] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 52.378524] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 52.378629] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 52.378738] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.378845] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 52.378964] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.379072] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 52.379178] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.379283] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 52.379391] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 52.379473] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 52.379553] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 52.379632] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 52.379712] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 52.379792] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 52.379890] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 52.380011] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 52.385025] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 52.387823] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 52.388060] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 52.388202] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 52.388442] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 52.388624] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A] <7>[ 52.388800] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 52.388953] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 52.389090] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 52.389229] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 52.389362] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 52.389495] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 52.389627] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 52.389753] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 52.389877] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 52.390034] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 52.390273] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.390395] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.390512] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.390628] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.390742] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.391008] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <6>[ 52.391082] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28) <7>[ 52.391181] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 52.392608] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.392745] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 52.393801] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 52.394437] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 52.394861] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 52.395420] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 52.395744] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 52.397444] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 52.406735] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 52.406745] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.406747] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.406748] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 52.406751] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.406752] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 52.406757] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.406758] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 52.406761] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.406803] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.406805] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.406806] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.406814] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.407192] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms) <7>[ 52.407558] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 52.407693] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: none <7>[ 52.407850] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 52.408021] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 52.408204] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 52.408306] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 52.408396] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 52.408485] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 52.408571] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 52.408689] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 52.408877] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 52.409065] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.409225] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1] <7>[ 52.409587] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 52.409713] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.409833] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2] <7>[ 52.410193] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 52.410320] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 52.410435] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3] <7>[ 52.410939] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: enabled <7>[ 52.411085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled <7>[ 52.411226] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled <7>[ 52.411316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 52.411405] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 52.411492] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 52.411578] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 52.411663] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 52.411749] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 52.411834] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B <7>[ 52.411927] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B <7>[ 52.412041] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B <7>[ 52.412151] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B <7>[ 52.412249] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B <7>[ 52.412330] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B <7>[ 52.412410] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C <7>[ 52.412489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C <7>[ 52.412567] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C <7>[ 52.412645] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C <7>[ 52.412721] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C <7>[ 52.412797] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C <7>[ 52.413570] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 52.413676] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 52.413762] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.413848] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 52.413936] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.414037] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.414135] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.414235] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.414316] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 52.414391] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.414464] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.414536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.414611] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 52.414688] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 52.414760] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A <7>[ 52.414831] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B <7>[ 52.414908] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C <7>[ 52.415024] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: enabled <7>[ 52.415133] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled <7>[ 52.415237] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled <7>[ 52.415317] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled <7>[ 52.415545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 52.415627] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 52.415701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 52.415773] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 52.415845] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 52.415924] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 52.416012] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz <7>[ 52.416103] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz <7>[ 52.416194] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz <7>[ 52.416274] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz <7>[ 52.416344] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz <7>[ 52.416411] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz <7>[ 52.416479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz <7>[ 52.416546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz <7>[ 52.416614] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz <7>[ 52.416685] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz <7>[ 52.416758] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz <7>[ 52.416829] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz <7>[ 52.417054] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 52.417141] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.417225] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 52.417301] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 52.417403] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 52.417503] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 52.417636] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 52.417738] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 52.417972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [setup_hw_state] <7>[ 52.418096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 52.418218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 52.418314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 52.418407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 52.418499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 52.418592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 52.418684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 52.418776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 52.418865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 52.418967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 52.419065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 52.419161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 52.419257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 52.419347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 52.419432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0 <7>[ 52.419518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 52.419603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 52.419688] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.419773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.419857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.419959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 52.420051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 52.420143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710 <7>[ 52.420233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 52.420318] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 52.420400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 52.420482] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 52.420564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 52.420652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 52.420740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 52.420828] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.420921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.421014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.421105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.421192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.421276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 52.421355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.421433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.421510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 52.421588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 52.421666] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state] <7>[ 52.421744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state] <7>[ 52.422059] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:88:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 52.422155] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:88:pipe A] <6>[ 52.426673] xe 0000:00:02.0: [drm] GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4 <7>[ 52.430171] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533f7 <7>[ 52.430274] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000 <7>[ 52.430357] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000 <7>[ 52.430438] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001 <7>[ 52.430515] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008d0 <7>[ 52.430591] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004 <7>[ 52.430665] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000 <7>[ 52.430738] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000 <7>[ 52.430809] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000 <7>[ 52.430879] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000 <7>[ 52.430966] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000 <7>[ 52.431042] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000 <7>[ 52.431117] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000 <7>[ 52.431192] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000 <7>[ 52.431269] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 52.431375] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 52.432266] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00] <7>[ 52.432381] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00] <7>[ 52.441951] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0 <7>[ 52.442799] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled <7>[ 52.443002] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (geometry): 00000000,00000000,0000007f <7>[ 52.443082] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (compute): 00000000,00000000,0000007f <7>[ 52.443159] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU mask per DSS: 000000ff <7>[ 52.443235] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU type: simd16 <7>[ 52.443311] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: L3 bank mask: 00000000,000000ff <6>[ 53.084132] xe 0000:00:02.0: [drm] GT0: ccs1 fused off <6>[ 53.084135] xe 0000:00:02.0: [drm] GT0: ccs2 fused off <6>[ 53.084136] xe 0000:00:02.0: [drm] GT0: ccs3 fused off <7>[ 53.084267] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine <7>[ 53.084387] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.084502] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.084609] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.084746] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine <7>[ 53.084867] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine <7>[ 53.085016] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine <7>[ 53.085125] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 53.085236] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 53.085342] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 53.086746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs <7>[ 53.086846] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000 <7>[ 53.086952] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000 <7>[ 53.087067] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440 <7>[ 53.087182] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000 <7>[ 53.087296] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000 <7>[ 53.087386] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f <7>[ 53.087473] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1 <7>[ 53.087557] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16 <7>[ 53.087639] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.087722] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.087804] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.087885] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.087978] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.088065] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.088161] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.088254] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.088340] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.088419] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.088497] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.088574] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.088651] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.088728] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.088807] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.088887] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.088985] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs <7>[ 53.089106] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000 <7>[ 53.089227] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 53.089328] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080 <7>[ 53.089408] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc <7>[ 53.089485] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01 <7>[ 53.089560] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c <7>[ 53.089638] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040 <7>[ 53.089714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200 <7>[ 53.089790] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000 <7>[ 53.089865] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08400840 <7>[ 53.089953] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002 <7>[ 53.090046] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe530] = 0x00000400 <7>[ 53.090140] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000 <7>[ 53.090232] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000 <7>[ 53.090589] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs <7>[ 53.090668] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000 <7>[ 53.090747] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 53.090824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080 <7>[ 53.091249] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs <7>[ 53.091332] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000 <7>[ 53.091405] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 53.091476] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 53.091771] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs <7>[ 53.091842] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000 <7>[ 53.091922] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 53.091992] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 53.092065] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 53.092136] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 53.092207] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 53.092646] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled <7>[ 53.092785] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533f7 <7>[ 53.092866] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800 <7>[ 53.092954] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014 <7>[ 53.093028] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001 <7>[ 53.093107] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008d0 <7>[ 53.093182] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004 <7>[ 53.093255] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000 <7>[ 53.093326] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000 <7>[ 53.093395] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000 <7>[ 53.093460] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000 <7>[ 53.093524] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000 <7>[ 53.093588] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000 <7>[ 53.093650] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000 <7>[ 53.093712] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000 <7>[ 53.093796] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs <7>[ 53.093959] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells <7>[ 53.095256] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT0: reusable buffer with 2048 dwords at 0xd18000 for xe_guc_init_post_hwconfig [xe] <7>[ 53.098153] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs. <7>[ 53.114095] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: Updated ADS capture size 20480 (was 45056) <7>[ 53.114921] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00] <7>[ 53.115013] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00] <7>[ 53.119956] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05] <7>[ 53.122763] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0 <7>[ 53.123115] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled <7>[ 53.124156] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC rcs0 WA job: 4138 dwords <7>[ 53.124300] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400 <7>[ 53.124390] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040 <7>[ 53.124464] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020 <7>[ 53.124540] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240 <7>[ 53.124613] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000 <7>[ 53.124683] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420 <7>[ 53.124755] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000 <7>[ 53.124826] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 53.127679] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC bcs0 WA job: 27 dwords <7>[ 53.127764] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 53.127844] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04 <7>[ 53.129547] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC ccs0 WA job: 0 dwords <7>[ 53.129676] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04 <6>[ 53.134026] xe 0000:00:02.0: [drm] GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.49.4 <7>[ 53.139121] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df43f7 <7>[ 53.139370] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000 <7>[ 53.139585] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000 <7>[ 53.139795] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001 <7>[ 53.140039] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e12 <7>[ 53.140246] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.140479] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000 <7>[ 53.140686] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000 <7>[ 53.140873] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000 <7>[ 53.141133] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000 <7>[ 53.141314] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000 <7>[ 53.141503] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000 <7>[ 53.141664] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000 <7>[ 53.141819] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000 <6>[ 53.143878] xe 0000:00:02.0: [drm] GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 53.146854] xe 0000:00:02.0: [drm] GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 53.148113] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 53.148252] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 53.148430] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 53.149926] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00] <7>[ 53.150234] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00] <7>[ 53.169945] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0 <7>[ 53.170424] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled <7>[ 53.170681] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 53.170939] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 53.171175] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU mask per DSS: 00000000 <7>[ 53.171400] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU type: simd16 <7>[ 53.171669] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: L3 bank mask: 00000000,0000000f <6>[ 53.171894] xe 0000:00:02.0: [drm] GT1: vcs1 fused off <6>[ 53.171898] xe 0000:00:02.0: [drm] GT1: vcs2 fused off <6>[ 53.171915] xe 0000:00:02.0: [drm] GT1: vcs3 fused off <6>[ 53.171917] xe 0000:00:02.0: [drm] GT1: vcs4 fused off <6>[ 53.171920] xe 0000:00:02.0: [drm] GT1: vcs5 fused off <6>[ 53.171923] xe 0000:00:02.0: [drm] GT1: vcs6 fused off <6>[ 53.171926] xe 0000:00:02.0: [drm] GT1: vcs7 fused off <6>[ 53.171929] xe 0000:00:02.0: [drm] GT1: vecs1 fused off <6>[ 53.171933] xe 0000:00:02.0: [drm] GT1: vecs2 fused off <6>[ 53.171936] xe 0000:00:02.0: [drm] GT1: vecs3 fused off <7>[ 53.172069] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine <7>[ 53.172491] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine <7>[ 53.172895] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine <7>[ 53.175241] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs <7>[ 53.175536] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000 <7>[ 53.175832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000 <7>[ 53.176153] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440 <7>[ 53.176425] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000 <7>[ 53.176698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000 <7>[ 53.177022] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f <7>[ 53.177314] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020 <7>[ 53.177538] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000 <7>[ 53.177758] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 53.178003] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1 <7>[ 53.178237] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16 <7>[ 53.178439] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 53.178636] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 53.178859] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 53.179075] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 53.179285] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 53.179479] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 53.179651] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 53.179820] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 53.180000] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 53.180158] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 53.180309] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 53.180456] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 53.180597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 53.180745] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 53.180890] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 53.181052] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 53.181185] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs <7>[ 53.181331] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000 <7>[ 53.181474] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 53.182053] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs <7>[ 53.182194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000 <7>[ 53.182323] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 53.182832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs <7>[ 53.182969] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000 <7>[ 53.183090] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 53.183762] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled <7>[ 53.183926] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df43f7 <7>[ 53.184044] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000 <7>[ 53.184153] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014 <7>[ 53.184257] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001 <7>[ 53.184358] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e12 <7>[ 53.184453] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004 <7>[ 53.184546] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000 <7>[ 53.184637] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000 <7>[ 53.184724] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000 <7>[ 53.184811] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000 <7>[ 53.184895] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000 <7>[ 53.184997] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000 <7>[ 53.185077] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000 <7>[ 53.185155] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000 <7>[ 53.185255] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs <7>[ 53.185375] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells <7>[ 53.186929] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT1: reusable buffer with 2048 dwords at 0x1982000 for xe_guc_init_post_hwconfig [xe] <7>[ 53.204347] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: Updated ADS capture size 24576 (was 45056) <7>[ 53.205438] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00] <7>[ 53.205591] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00] <7>[ 53.225222] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0 <7>[ 53.225672] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled <7>[ 53.226870] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vcs0 WA job: 0 dwords <7>[ 53.227103] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.229866] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vecs0 WA job: 0 dwords <7>[ 53.230086] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.232728] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC gsccs0 WA job: 0 dwords <7>[ 53.232949] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 53.274939] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC <7>[ 53.275868] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 53.276256] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 1, type 2, Engines: <7>[ 53.276611] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 53.278370] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008 <7>[ 53.278712] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108 <7>[ 53.279040] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208 <7>[ 53.279344] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308 <7>[ 53.279631] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8 <7>[ 53.279940] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008 <7>[ 53.280215] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108 <7>[ 53.280485] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208 <7>[ 53.280775] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308 <7>[ 53.281057] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8 <7>[ 53.281318] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008 <7>[ 53.281575] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108 <7>[ 53.281880] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208 <7>[ 53.282157] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308 <7>[ 53.282445] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8 <7>[ 53.283068] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 53.283338] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 53.283618] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 53.283940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset] <7>[ 53.284271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset] <7>[ 53.286260] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 53.286529] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 53.289946] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B] <7>[ 53.290332] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C] <7>[ 53.300640] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs <7>[ 53.304525] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered <7>[ 53.304768] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 53.305025] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Panel prepare <7>[ 53.305546] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 53.306892] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event <7>[ 53.307027] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs <7>[ 53.307450] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 53.308052] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event <7>[ 53.308095] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs <7>[ 53.308489] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 53.309298] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event <7>[ 53.309335] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs <7>[ 53.309753] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 53.310478] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event <6>[ 53.310508] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 53.310534] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 53.320345] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 53.324178] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 53.325410] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 53.325571] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 53.325957] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 53.325963] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 53.326918] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 53.327254] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 53.328845] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 53.329134] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.329301] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.329449] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 53.329625] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.329760] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.329888] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 53.330152] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 53.330287] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 53.330416] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 53.330694] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 53.330820] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping <7>[ 53.330977] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping <7>[ 53.331083] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 53.331357] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 53.331590] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7>[ 53.331598] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7>[ 53.332130] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 53.332138] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 53.332520] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 53.332656] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.332764] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 53.332771] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 53.332778] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 53.333664] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 53.333676] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.333678] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.333680] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 53.333683] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.333685] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 53.333692] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.333694] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 53.333697] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.333735] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7>[ 53.333868] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 53.333994] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 53.334768] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] status updated from unknown to connected <7>[ 53.335046] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 53.335523] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.335528] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 53.335529] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 53.335578] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7>[ 53.335588] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.335594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7>[ 53.335601] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 53.335821] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7>[ 53.335828] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7>[ 53.335832] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 53.336247] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7>[ 53.336253] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7>[ 53.336257] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 53.336402] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7>[ 53.336407] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7>[ 53.336410] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7>[ 53.336412] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7>[ 53.336414] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7>[ 53.336611] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 53.336642] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2880x1800 <7>[ 53.336644] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 53.336657] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 53.336751] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 53.336761] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 53.368856] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da3000 <6>[ 53.371582] fbcon: xedrmfb (fb0) is primary device <7>[ 53.373628] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 53.373915] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 53.374149] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 53.374388] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 53.374618] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7>[ 53.374846] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 53.375184] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 53.375423] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 53.375632] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 53.375845] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 53.376087] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 53.376301] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 53.376512] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.376718] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 53.376966] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.377162] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.377357] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.377321] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.377548] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 53.377598] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.377729] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 53.377802] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.377943] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 53.378013] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 53.378121] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 53.378195] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.378294] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 53.378370] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.378465] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 53.378545] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.378635] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 53.378716] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 53.378805] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 53.378888] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.379021] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 53.379066] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.379216] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 53.379235] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.379396] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 53.379402] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 53.379570] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.379561] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 53.379736] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.379745] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 53.379908] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.379933] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7>[ 53.380078] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 53.380243] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.380339] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 53.380404] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <6>[ 53.380568] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0 <7>[ 53.380537] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 53.380569] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.380710] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 12, 13, 0, 0, 0, 3, 0 <7>[ 53.380731] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 53.380868] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 289, 313, 0, 0, 38, 73, 87 <7>[ 53.380893] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.380869] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed <7>[ 53.381060] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.381063] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 319, 346, 0, 0, 39, 82, 88 <7>[ 53.381218] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.381232] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.381378] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 53.381393] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.381538] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.381536] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.381680] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.381694] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.381821] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.381852] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.382008] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.382023] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 53.382150] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.382182] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.382288] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.382338] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.382422] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.382493] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.382551] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.382642] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 53.382679] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.382791] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.382825] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.382945] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.382975] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.383102] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.383094] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.383227] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.383241] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 53.383352] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.383477] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 53.383608] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.383747] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.383908] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 53.384097] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1390840 num active planes 1 <7>[ 53.384337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 53.384534] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 53.384717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.384889] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 53.385081] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 53.385319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset] <7>[ 53.385502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 53.385674] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 53.385856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 53.386039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 53.386214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 53.386387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 53.386555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 53.386715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 53.386873] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 53.387211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 53.387372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 53.387523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 53.387670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 53.387815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 53.387990] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 53.388133] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 53.388274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 53.388415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 53.388552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 53.388685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 53.388816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0 <7>[ 53.388958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97 <7>[ 53.389093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 53.389225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.389355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 53.389485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.389613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 53.389741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 53.389869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710 <7>[ 53.389990] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 53.390095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 53.390209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 53.390323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 53.390434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 53.390546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 53.390657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 53.390766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.390875] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.391014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.391148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <6>[ 53.391241] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <7>[ 53.391282] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.391410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 53.391535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.391667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.391793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 53.391917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 53.392032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 53.392147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 53.392261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 53.392380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 53.392500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 53.392620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 53.392739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 53.392857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <6>[ 53.394865] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 53.398241] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 53.398879] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 53.403359] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC <7>[ 53.413241] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 53.413375] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 53.615010] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0 <7>[ 53.616685] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 53.627248] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off <7>[ 53.627558] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 53.627727] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 53.627928] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 53.628053] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7>[ 53.680188] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 53.680502] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7>[ 53.687958] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 53.688369] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 53.688317] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 53.689019] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 53.689015] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 53.689375] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A] <7>[ 53.689640] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1] <7>[ 53.689889] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A] <7>[ 53.690180] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B] <7>[ 53.690424] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C] <7>[ 53.690663] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2] <7>[ 53.690897] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A] <7>[ 53.691156] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B] <7>[ 53.691387] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C] <7>[ 53.691614] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3] <7>[ 53.691838] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A] <7>[ 53.692080] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B] <7>[ 53.692364] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C] <7>[ 53.692645] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 53.693965] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on <7>[ 53.694231] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (495 ms remaining) <7>[ 53.716679] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 53.717013] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7>[ 53.717334] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 53.717668] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 53.827191] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed <7>[ 54.191143] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 54.211768] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.212198] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 54.212569] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 54.248864] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 54.249280] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7>[ 54.249646] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 54.250031] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 54.351273] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.351328] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.351441] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 54.425249] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 54.427763] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7>[ 54.428136] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 54.430278] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.431489] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 54.432243] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 54.433271] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 54.434354] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 54.435324] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 54.435656] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 54.437012] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 54.437339] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 54.438159] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 54.438614] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 54.438986] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 54.439419] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 192000 <7>[ 54.455552] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 54.457271] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1] <7>[ 54.457632] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <7>[ 54.458960] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 54.460212] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 54.461344] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <6>[ 54.461918] Console: switching <7>[ 54.461757] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:205:eDP-1] set backlight level = 13892 <4>[ 54.461921] to colour frame buffer device 180x56 <6>[ 54.474415] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 54.481044] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 54.481353] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 54.481604] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 54.481839] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 54.482079] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 54.482281] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 54.482468] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 54.482644] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 54.482812] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 54.483168] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 54.483324] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 54.483473] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 54.483619] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 54.483764] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 54.483912] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 54.484049] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 54.484187] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 54.484331] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 54.484469] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 54.484604] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 54.484734] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 54.484862] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 54.485549] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 54.485699] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 54.485869] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 54.486045] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 54.486203] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 54.488600] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 54.490022] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 54.490049] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 54.491140] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7>[ 54.491164] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7>[ 54.492498] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 54.493087] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 54.493310] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.493514] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 54.493976] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 54.493983] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 54.493985] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.493986] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 54.493989] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.493990] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 54.494000] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.494001] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 54.494004] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.494033] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7>[ 54.494131] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 54.494222] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 54.494790] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 54.494792] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 54.494793] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 54.494837] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7>[ 54.494847] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 54.494852] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7>[ 54.494857] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 54.494999] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.495129] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.495231] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.495373] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.495482] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7>[ 54.495487] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7>[ 54.495491] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 54.495612] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.495704] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7>[ 54.495708] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7>[ 54.495711] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 54.495828] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 54.495925] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7>[ 54.495928] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7>[ 54.495932] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7>[ 54.495934] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7>[ 54.495936] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7>[ 54.496056] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 54.496078] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2880x1800 <7>[ 54.496080] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 54.496108] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 54.497423] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.497562] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 54.506553] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 54.522881] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 54.523088] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 54.523249] [IGT] xe_module_load: exiting, ret=0 <7>[ 54.599948] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 54.600138] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 54.600929] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 54.650621] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 55.503017] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.503039] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 55.503019] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.039921] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD off <7>[ 57.040340] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067