<5>[ 0.000000] Linux version 6.16.0-lgci-xe-xe-3484-c2d04724123c8df9e+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Jul 29 10:46:52 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/CPU: Model not found in latest microcode list <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f6c018 ESRT=0x68f89b98 MOKvar=0x6cd0c000 <6>[ 0.000000] efi: Remove mem276: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem278: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D96.2504232223 04/23/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000384] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000385] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004890] esrt: Reserving ESRT space from 0x0000000068f89b98 to 0x0000000068f89ce8. <7>[ 0.004898] e820: update [mem 0x68f89000-0x68f89fff] usable ==> reserved <6>[ 0.004917] Using GB pages for direct mapping <6>[ 0.005576] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005577] printk: early log buf free: 258760(98%) <6>[ 0.005578] Secure boot disabled <6>[ 0.005580] ACPI: Early table checksum verification disabled <6>[ 0.005582] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005585] ACPI: XSDT 0x000000006FF70228 00019C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005589] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005592] ACPI: DSDT 0x000000006FFB6000 025547 (v02 INTEL LNL 00000002 01000013) <6>[ 0.005594] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005595] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005596] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005598] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005599] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005600] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005602] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005603] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005604] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005606] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005607] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005608] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005610] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005611] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005612] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005614] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005615] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005616] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005618] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005619] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005620] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005621] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005623] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005624] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005625] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005627] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005628] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005629] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005631] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005632] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005634] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005635] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005636] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005638] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005639] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005640] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005641] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005643] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005644] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005645] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005647] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005648] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005649] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005651] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005652] ACPI: ASF! 0x000000006FF61000 000074 (v32 INTEL LNL 00000002 01000013) <6>[ 0.005653] ACPI: PHAT 0x000000006FF60000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005655] ACPI: BGRT 0x000000006FF5F000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005656] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005657] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb546] <6>[ 0.005657] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005657] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005658] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005659] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005659] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005659] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005660] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005660] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005660] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005660] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005661] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005661] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005661] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005662] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005662] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005662] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005662] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005663] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005663] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005663] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005664] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005664] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005664] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005664] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005665] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005665] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005665] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005666] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005666] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005666] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005666] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005667] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005667] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005667] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005668] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005668] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005668] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005669] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005669] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005669] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005670] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005670] ACPI: Reserving ASF! table memory at [mem 0x6ff61000-0x6ff61073] <6>[ 0.005670] ACPI: Reserving PHAT table memory at [mem 0x6ff60000-0x6ff607bf] <6>[ 0.005670] ACPI: Reserving BGRT table memory at [mem 0x6ff5f000-0x6ff5f037] <6>[ 0.005764] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.006094] No NUMA configuration found <6>[ 0.006095] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.006100] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006214] Zone ranges: <6>[ 0.006215] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006216] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006217] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006217] Device empty <6>[ 0.006218] Movable zone start for each node <6>[ 0.006218] Early memory node ranges <6>[ 0.006219] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006219] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006220] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006220] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006221] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006226] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006240] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007867] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035837] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035845] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.036593] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.036599] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036647] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036649] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036650] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036653] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036653] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036664] e820: update [mem 0x68f28000-0x68f42fff] usable ==> reserved <6>[ 0.036671] TSC deadline timer available <6>[ 0.036672] CPU topo: Max. logical packages: 1 <6>[ 0.036673] CPU topo: Max. logical dies: 1 <6>[ 0.036673] CPU topo: Max. dies per package: 1 <6>[ 0.036674] CPU topo: Max. threads per core: 1 <6>[ 0.036675] CPU topo: Num. cores per package: 8 <6>[ 0.036675] CPU topo: Num. threads per package: 8 <6>[ 0.036675] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036688] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036689] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036690] PM: hibernation: Registered nosave memory: [mem 0x68f28000-0x68f42fff] <6>[ 0.036691] PM: hibernation: Registered nosave memory: [mem 0x68f89000-0x68f89fff] <6>[ 0.036692] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036693] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036694] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036695] Booting paravirtualized kernel on bare hardware <6>[ 0.036697] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036705] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.037044] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.037048] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.037049] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.037062] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.037149] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.037155] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space. <5>[ 0.037169] random: crng init done <6>[ 0.039002] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039913] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039995] software IO TLB: area num 8. <6>[ 0.047382] Fallback order for Node 0: 0 <6>[ 0.047385] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.047386] Policy zone: Normal <6>[ 0.047396] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.047397] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.047399] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <4>[ 0.080470] ********************************************************** <4>[ 0.080471] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080472] ** ** <4>[ 0.080472] ** This system shows unhashed kernel memory addresses ** <4>[ 0.080472] ** via the console, logs, and other interfaces. This ** <4>[ 0.080472] ** might reduce the security of your system. ** <4>[ 0.080472] ** ** <4>[ 0.080473] ** If you see this message and you are not debugging ** <4>[ 0.080473] ** the kernel, report this immediately to your system ** <4>[ 0.080473] ** administrator! ** <4>[ 0.080473] ** ** <4>[ 0.080473] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080473] ********************************************************** <6>[ 0.081540] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089666] ftrace: allocating 59937 entries in 236 pages <6>[ 0.089667] ftrace: allocated 236 pages with 5 groups <6>[ 0.091027] Dynamic Preempt: voluntary <6>[ 0.091478] Running RCU self tests <6>[ 0.091478] Running RCU synchronous self tests <6>[ 0.091479] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.091479] rcu: RCU lockdep checking is enabled. <6>[ 0.091480] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.091480] Trampoline variant of Tasks RCU enabled. <6>[ 0.091481] Rude variant of Tasks RCU enabled. <6>[ 0.091481] Tracing variant of Tasks RCU enabled. <6>[ 0.091481] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.091482] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091520] Running RCU synchronous self tests <6>[ 0.091524] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091527] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091529] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.101692] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102175] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.102597] Console: colour dummy device 80x25 <6>[ 0.102606] printk: legacy console [tty0] enabled <6>[ 0.103768] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103775] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103779] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103783] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103786] ... CLASSHASH_SIZE: 4096 <6>[ 0.103790] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103794] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103798] ... CHAINHASH_SIZE: 262144 <6>[ 0.103801] memory used by lock dependency info: 54145 kB <6>[ 0.103805] memory used for stack traces: 4224 kB <6>[ 0.103809] per task-struct memory footprint: 1920 bytes <6>[ 0.103862] ACPI: Core revision 20250404 <6>[ 0.104741] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104821] APIC: Switch to symmetric I/O mode setup <6>[ 0.104827] DMAR: Host address width 38 <6>[ 0.104830] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104865] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104897] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104919] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104944] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.105041] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105222] DMAR: SATC flags: 0x1 <6>[ 0.105232] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105237] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105241] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107253] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111764] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.111783] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.111858] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.111865] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.112045] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.112049] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.112061] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.112067] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.112072] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.112080] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.112096] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.112104] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.112109] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.112115] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.112122] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.112128] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.112133] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.112138] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.112143] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format. <6>[ 0.112777] Freeing SMP alternatives memory: 56K <6>[ 0.112777] pid_max: default: 32768 minimum: 301 <6>[ 0.112777] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.112777] landlock: Up and running. <6>[ 0.112777] Yama: becoming mindful. <6>[ 0.112777] AppArmor: AppArmor initialized <6>[ 0.112777] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112777] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112777] Running RCU synchronous self tests <6>[ 0.112777] Running RCU synchronous self tests <6>[ 0.112777] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.112777] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.112777] core: cpu_core PMU driver: <6>[ 0.112777] ... version: 6 <6>[ 0.112777] ... bit width: 48 <6>[ 0.112777] ... generic registers: 10 <6>[ 0.112777] ... value mask: 0000ffffffffffff <6>[ 0.112777] ... max period: 00007fffffffffff <6>[ 0.112777] ... fixed-purpose events: 4 <6>[ 0.112777] ... event mask: 0001000f000003ff <6>[ 0.112813] signal: max sigframe size: 3632 <6>[ 0.112837] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.112938] rcu: Hierarchical SRCU implementation. <6>[ 0.112942] rcu: Max phase no-delay instances is 400. <6>[ 0.113085] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.114823] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.115093] smp: Bringing up secondary CPUs ... <6>[ 0.115437] smpboot: x86: Booting SMP configuration: <6>[ 0.115444] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010402] core: cpu_atom PMU driver: <6>[ 0.010402] ... version: 6 <6>[ 0.010402] ... bit width: 48 <6>[ 0.010402] ... generic registers: 8 <6>[ 0.010402] ... value mask: 0000ffffffffffff <6>[ 0.010402] ... max period: 00007fffffffffff <6>[ 0.010402] ... fixed-purpose events: 6 <6>[ 0.010402] ... event mask: 00000077000000ff <6>[ 0.122922] smp: Brought up 1 node, 8 CPUs <6>[ 0.123069] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.126058] Memory: 32359060K/33158528K available (24782K kernel code, 5625K rwdata, 9444K rodata, 5600K init, 68368K bss, 777120K reserved, 0K cma-reserved) <6>[ 0.126465] devtmpfs: initialized <6>[ 0.127083] x86/mm: Memory block size: 128MB <6>[ 0.148858] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.149347] Running RCU synchronous self tests <6>[ 0.149360] Running RCU synchronous self tests <6>[ 0.150814] Running RCU Tasks wait API self tests <6>[ 0.150988] Running RCU Tasks Rude wait API self tests <6>[ 0.150988] Running RCU Tasks Trace wait API self tests <6>[ 0.163844] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.164267] posixtimers hash table entries: 4096 (order: 6, 294912 bytes, linear) <6>[ 0.164982] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.165301] pinctrl core: initialized pinctrl subsystem <6>[ 0.166039] PM: RTC time: 17:18:43, date: 2025-07-29 <6>[ 0.166784] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.167762] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.168055] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.168331] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.168386] audit: initializing netlink subsys (disabled) <5>[ 0.168425] audit: type=2000 audit(1753809523.057:1): state=initialized audit_enabled=0 res=1 <6>[ 0.169511] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.169513] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.169519] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.169524] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.169529] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.169571] cpuidle: using governor ladder <6>[ 0.169571] cpuidle: using governor menu <6>[ 0.169844] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.170318] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.170346] PCI: Using configuration type 1 for base access <6>[ 0.170457] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.172290] HugeTLB: allocation took 0ms with hugepage_allocation_threads=2 <6>[ 0.172290] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.172290] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.172290] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.172290] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.175846] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.175851] raid6: using avx2x2 recovery algorithm <6>[ 0.176821] fbcon: Taking over console <6>[ 0.176932] ACPI: Added _OSI(Module Device) <6>[ 0.176936] ACPI: Added _OSI(Processor Device) <6>[ 0.176941] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.182830] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.869887] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.914324] ACPI: EC: EC started <6>[ 0.914353] ACPI: EC: interrupt blocked <6>[ 0.922006] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.922023] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 1.022809] Callback from call_rcu_tasks() invoked. <6>[ 1.258045] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.258139] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.343520] ACPI: Interpreter enabled <6>[ 1.343764] ACPI: PM: (supports S0 S4 S5) <6>[ 1.343777] ACPI: Using IOAPIC for interrupt routing <6>[ 1.358411] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.358431] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.418205] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.418297] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.491766] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.492341] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.495554] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.789733] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.798760] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.809670] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.811299] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.819947] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.829973] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.830238] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.830498] ACPI: \_SB_.PC00.D3C_: New power resource <3>[ 1.886619] ACPI: \: Can't tag data node <3>[ 1.899503] ACPI: \: Can't tag data node <3>[ 1.905192] ACPI: \: Can't tag data node <3>[ 1.908415] ACPI: \: Can't tag data node <3>[ 1.911966] ACPI: \: Can't tag data node <6>[ 2.099322] ACPI: \_TZ_.FN00: New power resource <6>[ 2.100671] ACPI: \_TZ_.FN01: New power resource <6>[ 2.101525] ACPI: \_TZ_.FN02: New power resource <6>[ 2.102374] ACPI: \_TZ_.FN03: New power resource <6>[ 2.103217] ACPI: \_TZ_.FN04: New power resource <6>[ 2.105861] ACPI: \PIN_: New power resource <6>[ 2.111634] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.111665] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.117675] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.134405] PCI host bridge to bus 0000:00 <6>[ 2.134466] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.134481] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.134493] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.134507] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.134520] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.134536] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.141758] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.143043] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.143326] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.143339] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.143352] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.143427] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.145989] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.146021] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.148008] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.148042] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.148053] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.149834] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.149877] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.149892] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.149913] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.150036] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.150139] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.157145] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.157190] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.157205] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.157225] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.157349] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.157437] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.164467] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.164511] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.164526] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.164546] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.164670] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.164763] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.171990] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.172031] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.172049] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.172413] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.172446] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.172457] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.173253] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.173309] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.173388] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.176371] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.176427] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.176439] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.176506] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.176513] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.178990] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.179045] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.179057] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.179123] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.179130] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.181701] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.181762] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.181839] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.183777] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.184921] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.185202] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.185965] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.186018] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.186087] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.189529] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.189590] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.189603] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.190051] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.190149] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.202822] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.202911] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.216771] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.216846] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.234433] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.234534] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.259573] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.259704] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.259842] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.264452] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint <6>[ 2.264530] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027] <6>[ 2.264540] pci 0000:00:16.3: BAR 1 [mem 0x94321000-0x94321fff] <6>[ 2.265196] pci 0000:00:1c.0: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.265349] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.265441] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.266095] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.266427] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.274462] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.276684] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.276800] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.276820] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.276941] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.278164] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.278229] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.278245] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.280202] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.280315] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.280678] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint <6>[ 2.280761] pci 0000:00:1f.6: BAR 0 [mem 0x94300000-0x9431ffff] <6>[ 2.280853] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold <6>[ 2.283604] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.283970] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.284213] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.284818] pci 0000:7f:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.284874] pci 0000:7f:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.287182] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.288870] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.689734] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 12.611058] Low-power S0 idle used by default for system suspend <6>[ 12.665546] ACPI: EC: interrupt unblocked <6>[ 12.665557] ACPI: EC: event unblocked <6>[ 12.665593] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 12.665600] ACPI: EC: GPE=0x6e <6>[ 12.665605] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 12.665614] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 12.666254] iommu: Default domain type: Translated <6>[ 12.666808] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 12.677224] SCSI subsystem initialized <7>[ 12.677912] libata version 3.00 loaded. <6>[ 12.678229] ACPI: bus type USB registered <6>[ 12.678513] usbcore: registered new interface driver usbfs <6>[ 12.678646] usbcore: registered new interface driver hub <6>[ 12.678767] usbcore: registered new device driver usb <6>[ 12.679168] pps_core: LinuxPPS API ver. 1 registered <6>[ 12.679181] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 12.679236] PTP clock support registered <6>[ 12.680002] EDAC MC: Ver: 3.0.0 <6>[ 12.682964] efivars: Registered efivars operations <6>[ 12.686031] NetLabel: Initializing <6>[ 12.686043] NetLabel: domain hash size = 128 <6>[ 12.686054] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 12.686224] NetLabel: unlabeled traffic allowed by default <6>[ 12.686265] mctp: management component transport protocol core <6>[ 12.686279] NET: Registered PF_MCTP protocol family <6>[ 12.686370] PCI: Using ACPI for IRQ routing <7>[ 12.719485] PCI: pci_cache_line_size set to 64 bytes <6>[ 12.719806] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 12.719974] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 12.719997] e820: reserve RAM buffer [mem 0x68f28000-0x6bffffff] <7>[ 12.720007] e820: reserve RAM buffer [mem 0x68f89000-0x6bffffff] <7>[ 12.720014] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 12.720020] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 12.721854] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 12.721879] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 12.721892] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 12.721929] vgaarb: loaded <7>[ 12.725825] Monitor-Mwait will be used to enter C-1 state <7>[ 12.725956] Monitor-Mwait will be used to enter C-2 state <7>[ 12.726004] Monitor-Mwait will be used to enter C-3 state <6>[ 12.736262] clocksource: Switched to clocksource tsc-early <5>[ 12.748342] VFS: Disk quotas dquot_6.6.0 <6>[ 12.748410] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 12.750737] AppArmor: AppArmor Filesystem Enabled <6>[ 12.751184] pnp: PnP ACPI init <6>[ 12.753329] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 12.753356] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 12.757052] system 00:02: [io 0x06a4] has been reserved <6>[ 12.757076] system 00:02: [io 0x06a0] has been reserved <6>[ 12.816821] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 12.816851] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 12.816881] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 12.816906] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 12.816929] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 12.816958] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 12.816985] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 12.817008] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 12.825516] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 12.837314] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 12.837635] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 12.846420] pnp: PnP ACPI: found 8 devices <6>[ 12.862618] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 12.862996] NET: Registered PF_INET protocol family <6>[ 12.863294] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 12.867114] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 12.867454] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 12.867719] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 12.869050] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 12.871156] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 12.871904] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 12.873552] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 12.875194] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 12.875309] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 12.875328] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 12.875343] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 12.875418] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 12.875429] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 12.875438] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 12.875449] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 12.875498] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 12.875523] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 12.875544] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 12.875569] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 12.875615] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 12.875646] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 12.875659] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 12.875671] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 12.875686] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 12.875701] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 12.875713] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 12.875725] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 12.875741] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 12.875749] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 12.875761] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 12.875773] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 12.875790] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 12.875865] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff] <6>[ 12.875961] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 12.875969] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 12.875978] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 12.875987] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 12.875996] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 12.876006] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 12.876014] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 12.876022] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 12.876032] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 12.876040] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 12.876048] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 12.876058] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 12.876065] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 12.876074] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 12.876084] pci_bus 0000:7f: resource 1 [mem 0x94200000-0x942fffff] <6>[ 12.877636] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 12.879929] PCI: CLS 0 bytes, default 64 <6>[ 12.880082] DMAR: No RMRR found <6>[ 12.880098] DMAR: No ATSR found <6>[ 12.880104] DMAR: dmar1: Using Queued invalidation <6>[ 12.880114] DMAR: dmar0: Using Queued invalidation <6>[ 12.880123] DMAR: dmar2: Using Queued invalidation <6>[ 12.881349] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 12.881465] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 12.881568] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 12.881668] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 12.886099] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 12.888617] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 12.888838] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 12.888961] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 12.889073] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 12.889194] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 12.889256] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 12.889319] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 12.889425] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 12.889525] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 12.889631] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 12.889692] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 12.889834] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 12.889899] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 12.889962] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 12.890026] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 12.890127] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 12.890193] pci 0000:00:16.3: Adding to iommu group 14 <6>[ 12.890361] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 12.890504] pci 0000:00:1f.0: Adding to iommu group 16 <6>[ 12.890568] pci 0000:00:1f.3: Adding to iommu group 16 <6>[ 12.890631] pci 0000:00:1f.4: Adding to iommu group 16 <6>[ 12.890697] pci 0000:00:1f.5: Adding to iommu group 16 <6>[ 12.890764] pci 0000:00:1f.6: Adding to iommu group 16 <6>[ 12.890934] pci 0000:7f:00.0: Adding to iommu group 17 <6>[ 12.901650] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 12.901669] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 12.901677] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 12.908022] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 12.908370] clocksource: Switched to clocksource tsc <6>[ 12.908779] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 12.917514] Initialise system trusted keyrings <5>[ 12.917614] Key type blacklist registered <6>[ 12.918148] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 12.929787] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 12.929944] ntfs3: Enabled Linux POSIX ACLs support <6>[ 12.929952] ntfs3: Read-only LZX/Xpress compression included <5>[ 12.930964] integrity: Platform Keyring initialized <5>[ 12.930988] integrity: Machine keyring initialized <6>[ 12.937520] xor: automatically using best checksumming function avx <5>[ 12.937533] Key type asymmetric registered <5>[ 12.937549] Asymmetric key parser 'x509' registered <6>[ 12.937700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) <6>[ 12.938280] io scheduler mq-deadline registered <6>[ 12.940364] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 12.942653] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 12.943387] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 12.944828] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 12.945533] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 12.946965] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 12.947641] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 12.949919] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 12.950657] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 12.952907] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 12.953160] ACPI: button: Lid Switch [LID0] <6>[ 12.953474] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 12.953701] ACPI: button: Sleep Button [SLPB] <6>[ 12.953967] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 12.954474] ACPI: button: Power Button [PWRB] <6>[ 13.096105] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 13.096206] ACPI: thermal: Thermal Zone [TZ00] (51 C) <6>[ 13.098525] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 13.099026] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 13.100048] ACPI: battery: Slot [BAT0] (battery present) <6>[ 13.122577] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 13.139563] serial 0000:00:12.0: enabling device (0000 -> 0002) <6>[ 13.141383] serial 0000:00:16.3: enabling device (0001 -> 0003) <6>[ 13.164327] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A <5>[ 13.166383] hpet_acpi_add: no address or irqs in _CRS <6>[ 13.166600] Linux agpgart interface v0.103 <6>[ 13.167597] ACPI: bus type drm_connector registered <7>[ 13.168906] initcall simpledrm_platform_driver_init blacklisted <6>[ 13.190637] loop: module loaded <6>[ 13.232681] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 13.382780] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 13.495704] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 13.609592] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 13.724381] Key type psk registered <6>[ 13.728185] nvme 0000:7f:00.0: platform quirk: setting simple suspend <6>[ 13.729027] nvme nvme0: pci function 0000:7f:00.0 <6>[ 13.729745] tun: Universal TUN/TAP device driver, 1.6 <6>[ 13.730778] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 13.730917] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 13.732786] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 13.735461] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 13.735490] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 13.735511] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 13.735892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16 <6>[ 13.735914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.735924] usb usb1: Product: xHCI Host Controller <6>[ 13.735932] usb usb1: Manufacturer: Linux 6.16.0-lgci-xe-xe-3484-c2d04724123c8df9e+ xhci-hcd <6>[ 13.735944] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 13.737052] hub 1-0:1.0: USB hub found <6>[ 13.737129] hub 1-0:1.0: 1 port detected <6>[ 13.740895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16 <6>[ 13.740911] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.740922] usb usb2: Product: xHCI Host Controller <6>[ 13.740929] usb usb2: Manufacturer: Linux 6.16.0-lgci-xe-xe-3484-c2d04724123c8df9e+ xhci-hcd <6>[ 13.740941] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 13.741722] hub 2-0:1.0: USB hub found <6>[ 13.741789] hub 2-0:1.0: 3 ports detected <6>[ 13.763627] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 13.766850] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 13.766889] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 13.768702] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 13.770965] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 13.770994] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 13.771013] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 13.771227] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16 <6>[ 13.771240] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.771251] usb usb3: Product: xHCI Host Controller <6>[ 13.771258] usb usb3: Manufacturer: Linux 6.16.0-lgci-xe-xe-3484-c2d04724123c8df9e+ xhci-hcd <6>[ 13.771270] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 13.772058] hub 3-0:1.0: USB hub found <6>[ 13.772084] nvme0n1: p1 p2 <6>[ 13.772112] hub 3-0:1.0: 8 ports detected <6>[ 13.801593] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16 <6>[ 13.801616] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 13.801626] usb usb4: Product: xHCI Host Controller <6>[ 13.801634] usb usb4: Manufacturer: Linux 6.16.0-lgci-xe-xe-3484-c2d04724123c8df9e+ xhci-hcd <6>[ 13.801646] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 13.802414] hub 4-0:1.0: USB hub found <6>[ 13.802457] hub 4-0:1.0: 2 ports detected <6>[ 13.809389] usbcore: registered new interface driver usb-storage <6>[ 13.809602] usbcore: registered new interface driver usbserial_generic <6>[ 13.809739] usbserial: USB Serial support registered for generic <6>[ 13.809825] usbcore: registered new interface driver ftdi_sio <6>[ 13.809868] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 13.809946] usbcore: registered new interface driver pl2303 <6>[ 13.809985] usbserial: USB Serial support registered for pl2303 <6>[ 13.810111] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 13.810120] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 14.668863] i8042: Can't read CTR while initializing i8042 <3>[ 14.668876] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 14.669387] mousedev: PS/2 mouse device common for all mice <6>[ 14.670445] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 14.672791] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 14.673030] rtc_cmos rtc_cmos: setting system clock to 2025-07-29T17:18:58 UTC (1753809538) <6>[ 14.673233] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 14.673290] i2c_dev: i2c /dev entries driver <6>[ 14.678401] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 14.678423] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 14.678435] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 14.678477] device-mapper: uevent: version 1.0.3 <6>[ 14.678841] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 14.678860] intel_pstate: Intel P-state driver initializing <6>[ 14.682685] Hybrid CPU capacity scaling enabled <6>[ 14.683042] processor cpu0: EM: created perf domain <6>[ 14.683320] processor cpu1: EM: created perf domain <6>[ 14.683612] processor cpu2: EM: created perf domain <6>[ 14.683905] processor cpu3: EM: created perf domain <6>[ 14.684154] processor cpu4: EM: created perf domain <6>[ 14.684402] processor cpu5: EM: created perf domain <6>[ 14.684668] processor cpu6: EM: created perf domain <6>[ 14.684919] processor cpu7: EM: created perf domain <6>[ 14.686192] intel_pstate: HWP enabled <6>[ 14.686203] sdhci: Secure Digital Host Controller Interface driver <6>[ 14.686211] sdhci: Copyright(c) Pierre Ossman <6>[ 14.686438] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 14.690025] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 14.691430] drop_monitor: Initializing network drop monitor service <6>[ 14.691714] NET: Registered PF_INET6 protocol family <6>[ 14.694560] Segment Routing with IPv6 <6>[ 14.694603] In-situ OAM (IOAM) with IPv6 <6>[ 14.694650] NET: Registered PF_PACKET protocol family <5>[ 14.694770] Key type dns_resolver registered <4>[ 14.698459] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 14.698703] microcode: Current revision: 0x00000121 <6>[ 14.699279] IPI shorthand broadcast: enabled <6>[ 14.715113] sched_clock: Marking stable (14705001829, 9402543)->(14791669557, -77265185) <6>[ 14.715902] registered taskstats version 1 <5>[ 14.717040] Loading compiled-in X.509 certificates <6>[ 14.759745] Demotion targets for Node 0: null <6>[ 14.760066] kmemleak: Kernel memory leak detector initialized (mem pool available: 14947) <6>[ 14.760071] kmemleak: Automatic memory scanning thread started <5>[ 14.760329] Key type .fscrypt registered <5>[ 14.760335] Key type fscrypt-provisioning registered <6>[ 14.763594] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 14.765496] Key type encrypted registered <6>[ 14.765506] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 14.765628] ima: No TPM chip found, activating TPM-bypass! <5>[ 14.765643] Loading compiled-in module X.509 certificates <5>[ 14.766259] Loaded X.509 cert 'Build time autogenerated kernel key: 0e5eeac6a5b99e44099a4585a31e7f32f241fecb' <6>[ 14.766270] ima: Allocated hash algorithm: sha256 <6>[ 14.766313] ima: No architecture policies found <6>[ 14.766410] evm: Initialising EVM extended attributes: <6>[ 14.766414] evm: security.selinux <6>[ 14.766417] evm: security.SMACK64 <6>[ 14.766420] evm: security.SMACK64EXEC <6>[ 14.766423] evm: security.SMACK64TRANSMUTE <6>[ 14.766427] evm: security.SMACK64MMAP <6>[ 14.766430] evm: security.apparmor <6>[ 14.766433] evm: security.ima <6>[ 14.766436] evm: security.capability <6>[ 14.766440] evm: HMAC attrs: 0x1 <6>[ 14.768373] PM: Magic number: 1:262:341 <6>[ 14.768454] acpi ACPI0007:03: hash matches <6>[ 14.768624] printk: legacy console [netcon0] enabled <6>[ 14.768631] netconsole: network logging started <6>[ 14.769203] RAS: Correctable Errors collector initialized. <6>[ 14.769678] clk: Disabling unused clocks <6>[ 14.769690] PM: genpd: Disabling unused power domains <6>[ 14.770141] md: Waiting for all devices to be available before autodetect <6>[ 14.770148] md: If you don't use raid, use raid=noautodetect <6>[ 14.770154] md: Autodetecting RAID arrays. <6>[ 14.770163] md: autorun ... <6>[ 14.770167] md: ... autorun DONE. <6>[ 14.812231] EXT4-fs (nvme0n1p2): mounted filesystem f759a4d4-0fa4-47c1-9d9b-f58f114e0a71 ro with ordered data mode. Quota mode: none. <6>[ 14.812294] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 14.812843] devtmpfs: mounted <6>[ 14.824356] Freeing unused decrypted memory: 2028K <6>[ 14.825238] Freeing unused kernel image (initmem) memory: 5600K <6>[ 14.825263] Write protecting the kernel read-only data: 36864k <6>[ 14.826133] Freeing unused kernel image (text/rodata gap) memory: 1840K <6>[ 14.826467] Freeing unused kernel image (rodata/data gap) memory: 796K <6>[ 14.832395] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 14.832428] Run /sbin/init as init process <7>[ 14.832434] with arguments: <7>[ 14.832435] /sbin/init <7>[ 14.832436] with environment: <7>[ 14.832437] HOME=/ <7>[ 14.832438] TERM=linux <7>[ 14.832439] BOOT_IMAGE=/boot/drm_intel <7>[ 14.878945] systemd[1]: Inserted module 'autofs4' <6>[ 14.889703] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd <7>[ 14.895264] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 14.895298] systemd[1]: Detected architecture x86-64. <7>[ 14.896802] systemd[1]: Hostname set to . <6>[ 14.901773] usb 4-2: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=31.00 <6>[ 14.901802] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6 <6>[ 14.901813] usb 4-2: Product: USB 10/100/1G/2.5G LAN <6>[ 14.901822] usb 4-2: Manufacturer: Realtek <6>[ 14.901830] usb 4-2: SerialNumber: 001000001 <7>[ 15.132513] systemd[1]: Queued start job for default target graphical.target. <7>[ 15.174644] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 15.176652] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 15.178057] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 15.178302] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 15.178958] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 15.179077] systemd[1]: Expecting device dev-disk-by\x2duuid-481C\x2d2D4A.device - /dev/disk/by-uuid/481C-2D4A... <7>[ 15.179167] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 15.179251] systemd[1]: Reached target slices.target - Slice Units. <7>[ 15.179324] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 15.179388] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 15.179558] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 15.179820] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 15.180175] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 15.180446] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 15.180778] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 15.181022] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 15.181220] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 15.181504] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 15.181832] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 15.182103] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 15.182271] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.182563] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 15.182840] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 15.197798] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 15.201291] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 15.204169] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 15.206980] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 15.212133] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 15.215199] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 15.218382] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 15.222307] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 15.224849] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 15.227632] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 15.230711] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 15.234946] systemd-journald[211]: Collecting audit messages is disabled. <7>[ 15.235002] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 15.238586] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 15.244494] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 15.248974] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 15.249247] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 15.254902] pstore: Using crash dump compression: deflate <7>[ 15.255006] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 15.258769] pstore: Registered efi_pstore as persistent store backend <7>[ 15.261342] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 15.261463] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.261533] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 15.265013] fuse: init (API version 7.44) <7>[ 15.265414] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 15.272085] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 15.397625] EXT4-fs (nvme0n1p2): re-mounted f759a4d4-0fa4-47c1-9d9b-f58f114e0a71 r/w. <6>[ 15.434145] Adding 8388604k swap on /swap.img. Priority:-2 extents:52 across:433217532k SS <7>[ 15.451032] systemd-journald[211]: Received client request to flush runtime journal. <7>[ 15.465570] systemd-journald[211]: /var/log/journal/78833d7dfe2d4e2fb998725030f36ed0/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 15.465582] systemd-journald[211]: Rotating system journal. <4>[ 16.142521] nvme nvme0: using unchecked data buffer <6>[ 16.295752] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 16.329177] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 16.354224] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 16.366057] intel-hid INTC107B:00: platform supports 5 button array <6>[ 16.385469] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <5>[ 16.440648] audit: type=1400 audit(1753809540.266:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=427 comm="apparmor_parser" <5>[ 16.440931] audit: type=1400 audit(1753809540.266:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=426 comm="apparmor_parser" <5>[ 16.441230] audit: type=1400 audit(1753809540.266:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=428 comm="apparmor_parser" <5>[ 16.441775] audit: type=1400 audit(1753809540.267:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=429 comm="apparmor_parser" <5>[ 16.445202] audit: type=1400 audit(1753809540.270:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=431 comm="apparmor_parser" <5>[ 16.449619] audit: type=1400 audit(1753809540.274:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=432 comm="apparmor_parser" <5>[ 16.453053] audit: type=1400 audit(1753809540.278:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=433 comm="apparmor_parser" <5>[ 16.454926] audit: type=1400 audit(1753809540.280:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=434 comm="apparmor_parser" <5>[ 16.459399] audit: type=1400 audit(1753809540.284:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=435 comm="apparmor_parser" <5>[ 16.462992] audit: type=1400 audit(1753809540.288:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=436 comm="apparmor_parser" <3>[ 16.465834] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 16.472823] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <6>[ 16.612008] pci 0000:00:05.0: Setting to D3hot <6>[ 16.623471] pci 0000:00:0b.0: Setting to D3hot <4>[ 16.635545] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform <6>[ 16.635787] intel_pmc_core INT33A1:00: initialized <6>[ 16.855057] ACPI: bus type thunderbolt registered <6>[ 16.864437] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 16.881746] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 16.881751] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 16.890533] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 16.891130] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 16.920108] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 16.933332] e1000e: Intel(R) PRO/1000 Network Driver <6>[ 16.933336] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. <6>[ 16.936413] e1000e 0000:00:1f.6: enabling device (0000 -> 0002) <6>[ 16.937503] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode <6>[ 16.947850] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 16.949239] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 16.974151] usbcore: registered new device driver r8152-cfgselector <6>[ 17.039525] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 17.041510] intel_rapl_common: Found RAPL domain package <6>[ 17.041517] intel_rapl_common: Found RAPL domain dram <6>[ 17.056131] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 17.056139] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 17.056140] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 17.056142] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 17.056143] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 17.100657] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 17.101692] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.115277] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.157423] r8152-cfgselector 4-2: reset SuperSpeed USB device number 2 using xhci_hcd <6>[ 17.158807] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 17.163302] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.189260] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock <6>[ 17.267672] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:34:25 <6>[ 17.267681] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection <6>[ 17.267803] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF <6>[ 17.269811] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.284402] r8152 4-2:1.0 eth0: v1.12.13 <6>[ 17.293026] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.298480] usbcore: registered new interface driver r8152 <6>[ 17.375746] usbcore: registered new interface driver cdc_ether <4>[ 17.437894] block nvme0n1: No UUID available providing old NGUID <6>[ 17.466790] usbcore: registered new interface driver cdc_ncm <6>[ 17.504210] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.524091] usbcore: registered new interface driver cdc_wdm <6>[ 17.536911] usbcore: registered new interface driver cdc_mbim <6>[ 17.541671] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.549864] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.612186] intel_rapl_common: Found RAPL domain package <6>[ 17.612192] intel_rapl_common: Found RAPL domain core <6>[ 17.612195] intel_rapl_common: Found RAPL domain dram <6>[ 17.612197] intel_rapl_common: Found RAPL domain psys <6>[ 17.631792] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 17.639430] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 17.642445] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.668586] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 17.668596] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 17.668598] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 17.710043] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.802463] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1 <4>[ 17.807479] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 17.835085] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 17.862453] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 17.862480] 0x000000000000-0x000002000000 : "BIOS" <6>[ 17.874305] r8152 4-2:1.0 enx00e04c402a2b: renamed from eth0 <6>[ 17.886713] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.925205] loop0: detected capacity change from 0 to 8 <6>[ 18.304909] Consider using thermal netlink events interface <6>[ 18.478280] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.676892] hid: raw HID events driver (C) Jiri Kosina <6>[ 18.683302] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 18.715664] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.719400] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.720961] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.721036] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.722583] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.723021] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.723373] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.725511] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.726192] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.726298] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.729757] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.731030] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.733059] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.734348] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.737697] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.737972] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.740474] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.741051] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.743107] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.743192] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.745269] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.745687] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.747695] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.835820] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.838983] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.843143] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.847721] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.852468] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.856491] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.860590] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.864980] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.869751] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.872939] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.876322] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.880544] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.884065] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.889114] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.893804] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.897280] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.902026] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.905385] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.911085] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.917670] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 20.213870] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 20.213916] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 20.213958] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 21.220127] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 21.220166] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 21.220218] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 21.686474] r8152 4-2:1.0 enx00e04c402a2b: carrier on <6>[ 29.268275] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 29.271475] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 36.609529] systemd-journald[211]: /var/log/journal/78833d7dfe2d4e2fb998725030f36ed0/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 49.773737] [IGT] xe_module_load: executing <7>[ 49.782000] [IGT] xe_module_load: starting subtest load <5>[ 50.011690] Setting dangerous option force_probe - tainting kernel <6>[ 50.014578] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 50.016310] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 50.016321] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 50.016431] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 50.016544] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 50.018986] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 50.019124] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 50.019215] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 50.019317] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 50.019423] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 50.019518] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 50.019612] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 50.019704] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 50.019776] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 50.019863] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 50.019935] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 50.020031] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4 <7>[ 50.020126] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 50.020219] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes <7>[ 50.020319] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 50.020433] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 50.020561] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 50.020684] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 50.020782] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 50.020871] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 50.020957] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.021042] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 50.021126] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 50.021210] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 50.021298] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.021388] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 50.021498] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 50.021605] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 50.021707] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.021786] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 50.021866] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 50.021944] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 50.022023] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.022102] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 50.022179] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 50.022256] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 50.022333] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.022414] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 50.022506] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 50.022605] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 50.022704] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 50.022787] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 50.022877] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 50.023335] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 50.023550] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 50.023688] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 50.023801] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 50.023895] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 50.023985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 50.024076] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 50.024163] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 50.024245] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 50.024336] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 50.024427] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 50.024533] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 50.024637] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 50.024738] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 50.024820] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 50.024894] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 50.024970] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 50.025045] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 262 not known; assuming 40 <7>[ 50.025119] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 50.025200] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 50.025282] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 50.025365] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 50.025511] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 50.025633] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 50.025747] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.025831] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.025908] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 50.025989] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 50.026096] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 50.026237] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 50.026375] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.026849] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 50.027023] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 50.027169] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 50.027288] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 50.027390] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 50.027554] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 50.027689] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 50.027708] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 50.027826] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 50.027927] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 50.028029] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 50.028293] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 50.028742] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 50.029127] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 50.029242] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 50.029336] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec) <7>[ 50.029428] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 106 (106.0 usec) <7>[ 50.029538] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 106 (106.0 usec) <7>[ 50.029644] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 106 (106.0 usec) <7>[ 50.029739] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 99 (99.0 usec) <7>[ 50.029818] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 106 (106.0 usec) <7>[ 50.033390] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 50.033565] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 50.033706] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 50.033900] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 50.034196] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 50.034513] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP) <7>[ 50.034815] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 50.035100] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 50.035390] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.035635] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 50.035698] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 50.035971] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 50.036236] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 50.036502] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 50.036761] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 50.037032] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 50.037288] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 50.037582] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.037819] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 50.038055] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 50.038284] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 50.038578] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 50.038821] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 50.039125] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 50.039361] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 50.039632] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 50.039890] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 50.040147] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 50.040399] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 50.040674] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 50.040920] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 50.041421] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 50.041771] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 50.042105] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 50.042508] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:204:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 50.042887] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:204:DDI A/PHY A] <7>[ 50.043174] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 50.043376] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 50.043658] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 50.043857] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 50.044009] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 50.044158] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 50.044308] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 50.044492] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 50.044642] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 50.044877] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:204:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 50.045092] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.045212] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.045331] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.045453] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.045566] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 50.045829] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.046262] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 50.047514] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7>[ 50.047935] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 50.049787] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 50.050393] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 50.051206] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <6>[ 50.052504] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28) <7>[ 50.052555] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 50.053037] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 50.054554] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 50.064944] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 50.064958] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 50.064961] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.064963] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 50.064966] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.064969] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 50.064976] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.064977] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 50.064981] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 50.065034] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 50.065036] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 50.065037] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.065050] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:205:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 50.065473] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:205:eDP-1] Performing OUI wait (0 ms) <7>[ 50.065898] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:205:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 50.066061] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:205:eDP-1] DRRS type: none <7>[ 50.066225] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:205:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 50.066377] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:205:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 50.066600] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 50.066728] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 50.066845] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 50.066938] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 50.067024] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 50.067141] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 50.067333] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:213:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 50.067528] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 50.067683] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:213:DDI TC1/PHY TC1] <7>[ 50.068091] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:225:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 50.068220] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 50.068331] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:225:DDI TC2/PHY TC2] <7>[ 50.068610] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:233:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 50.068757] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 50.068869] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:233:DDI TC3/PHY TC3] <7>[ 50.069283] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: enabled <7>[ 50.069397] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:145:pipe B] hw state readout: disabled <7>[ 50.069545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:202:pipe C] hw state readout: disabled <7>[ 50.069660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 50.069757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 50.069840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 50.069921] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 50.070000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 50.070079] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 50.070156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] hw state readout: disabled, pipe B <7>[ 50.070232] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] hw state readout: disabled, pipe B <7>[ 50.070307] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] hw state readout: disabled, pipe B <7>[ 50.070381] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] hw state readout: disabled, pipe B <7>[ 50.070473] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] hw state readout: disabled, pipe B <7>[ 50.070570] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] hw state readout: disabled, pipe B <7>[ 50.070665] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] hw state readout: disabled, pipe C <7>[ 50.070750] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] hw state readout: disabled, pipe C <7>[ 50.070823] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] hw state readout: disabled, pipe C <7>[ 50.070896] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] hw state readout: disabled, pipe C <7>[ 50.070969] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] hw state readout: disabled, pipe C <7>[ 50.071042] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] hw state readout: disabled, pipe C <7>[ 50.071816] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 50.071926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:204:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 50.072012] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) <7>[ 50.072095] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 50.072171] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:215:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.072244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.072318] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.072394] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) <7>[ 50.072489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:225:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 50.072585] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:227:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.072679] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.072757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:229:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.072830] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) <7>[ 50.072905] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 50.072976] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST A] hw state readout: disabled, pipe A <7>[ 50.073045] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DP-MST B] hw state readout: disabled, pipe B <7>[ 50.073114] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:237:DP-MST C] hw state readout: disabled, pipe C <7>[ 50.073207] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:205:eDP-1] hw state readout: enabled <7>[ 50.073293] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:214:DP-1] hw state readout: disabled <7>[ 50.073382] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:226:DP-2] hw state readout: disabled <7>[ 50.073491] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:234:DP-3] hw state readout: disabled <7>[ 50.073685] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 50.073768] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 50.073841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 50.073914] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 50.073984] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 50.074054] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 50.074123] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:90:plane 1B] min_cdclk 0 kHz <7>[ 50.074191] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:100:plane 2B] min_cdclk 0 kHz <7>[ 50.074259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:110:plane 3B] min_cdclk 0 kHz <7>[ 50.074327] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 4B] min_cdclk 0 kHz <7>[ 50.074394] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:130:plane 5B] min_cdclk 0 kHz <7>[ 50.074486] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:140:cursor B] min_cdclk 0 kHz <7>[ 50.074573] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:147:plane 1C] min_cdclk 0 kHz <7>[ 50.074659] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:157:plane 2C] min_cdclk 0 kHz <7>[ 50.074740] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:167:plane 3C] min_cdclk 0 kHz <7>[ 50.074813] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:177:plane 4C] min_cdclk 0 kHz <7>[ 50.074885] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:187:plane 5C] min_cdclk 0 kHz <7>[ 50.074956] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:197:cursor C] min_cdclk 0 kHz <7>[ 50.075179] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 50.075261] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:145:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.075342] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:202:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 50.075426] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 50.075559] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 50.075689] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 50.075826] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 50.075927] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 50.076153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [setup_hw_state] <7>[ 50.076264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 50.076368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 50.076480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 50.076599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 50.076716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 50.076807] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 50.076897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 50.076986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 50.077072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 50.077157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 50.077244] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 50.077330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 50.077419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 50.077523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 50.077632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0 <7>[ 50.077735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 50.077820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 50.077903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 50.077987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 50.078071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 50.078160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 50.078247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 50.078333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710 <7>[ 50.078422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 50.078525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 50.078633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 50.078736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 50.078816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 50.078896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 50.078975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 50.079053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.079130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.079207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.079283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.079359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.079447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 50.079547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.079653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.079747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 50.079827] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 50.079905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [setup_hw_state] <7>[ 50.079984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [setup_hw_state] <7>[ 50.080232] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:88:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 50.080328] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:88:pipe A] <6>[ 50.087868] xe 0000:00:02.0: [drm] GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.45.2 <7>[ 50.091475] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7 <7>[ 50.091599] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000 <7>[ 50.091700] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000 <7>[ 50.091791] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001 <7>[ 50.091868] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc <7>[ 50.091941] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004 <7>[ 50.092013] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000 <7>[ 50.092083] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000 <7>[ 50.092153] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000 <7>[ 50.092222] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000 <7>[ 50.092294] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000 <7>[ 50.092362] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000 <7>[ 50.092439] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000 <7>[ 50.092509] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000 <7>[ 50.092580] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 50.092694] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 50.093769] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00] <7>[ 50.093868] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00] <7>[ 50.103470] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0 <7>[ 50.104302] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled <7>[ 50.104513] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (geometry): 00000000,00000000,000000fe <7>[ 50.104607] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: dss mask (compute): 00000000,00000000,000000fe <7>[ 50.104696] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU mask per DSS: 000000ff <7>[ 50.104781] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: EU type: simd16 <7>[ 50.104857] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT0: L3 bank mask: 00000000,000000ff <6>[ 50.745227] xe 0000:00:02.0: [drm] GT0: ccs1 fused off <6>[ 50.745231] xe 0000:00:02.0: [drm] GT0: ccs2 fused off <6>[ 50.745232] xe 0000:00:02.0: [drm] GT0: ccs3 fused off <7>[ 50.745390] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine <7>[ 50.745515] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 50.745633] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 50.745740] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 50.745874] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine <7>[ 50.745999] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine <7>[ 50.746125] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine <7>[ 50.746201] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 50.746280] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 50.746354] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 50.747582] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs <7>[ 50.747679] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000 <7>[ 50.747775] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000 <7>[ 50.747861] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440 <7>[ 50.747945] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000 <7>[ 50.748027] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000 <7>[ 50.748106] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f <7>[ 50.748188] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1 <7>[ 50.748268] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16 <7>[ 50.748347] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 50.748433] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 50.748515] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 50.748595] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 50.748677] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 50.748756] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 50.748832] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 50.748906] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 50.748981] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 50.749059] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 50.749135] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 50.749211] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 50.749285] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 50.749358] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 50.749433] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 50.749508] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 50.749582] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs <7>[ 50.749673] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000 <7>[ 50.749764] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 50.749850] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080 <7>[ 50.749935] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc <7>[ 50.750013] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01 <7>[ 50.750083] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c <7>[ 50.750156] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040 <7>[ 50.750230] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200 <7>[ 50.750303] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000 <7>[ 50.750380] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800 <7>[ 50.750468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002 <7>[ 50.750552] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000 <7>[ 50.750635] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000 <7>[ 50.750957] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs <7>[ 50.751035] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000 <7>[ 50.751105] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 50.751174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080 <7>[ 50.751459] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs <7>[ 50.751542] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000 <7>[ 50.751619] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 50.751689] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 50.751983] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs <7>[ 50.752057] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000 <7>[ 50.752131] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 50.752204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 50.752275] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 50.752342] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 50.752411] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 50.752922] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled <7>[ 50.753050] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x003533d7 <7>[ 50.753127] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800 <7>[ 50.753201] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014 <7>[ 50.753273] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001 <7>[ 50.753346] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000008cc <7>[ 50.753423] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004 <7>[ 50.753505] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000 <7>[ 50.753579] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000 <7>[ 50.753651] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000 <7>[ 50.753718] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000 <7>[ 50.753784] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000 <7>[ 50.753848] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000 <7>[ 50.753911] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000 <7>[ 50.753975] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000 <7>[ 50.754068] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs <7>[ 50.754347] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells <7>[ 50.755457] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT0: reusable buffer with 2048 dwords at 0xd16000 for xe_guc_init_post_hwconfig [xe] <7>[ 50.757760] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs. <7>[ 50.773983] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: Updated ADS capture size 20480 (was 45056) <7>[ 50.774773] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00] <7>[ 50.774889] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00] <7>[ 50.784468] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0 <7>[ 50.784847] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel enabled <7>[ 50.785702] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC rcs0 WA job: 4138 dwords <7>[ 50.785837] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400 <7>[ 50.785923] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040 <7>[ 50.785998] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020 <7>[ 50.786072] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240 <7>[ 50.786150] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000 <7>[ 50.786225] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420 <7>[ 50.786301] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000 <7>[ 50.786379] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 50.789302] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC bcs0 WA job: 27 dwords <7>[ 50.789441] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 50.789544] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04 <7>[ 50.791666] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC ccs0 WA job: 0 dwords <7>[ 50.791792] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04 <6>[ 50.795554] xe 0000:00:02.0: [drm] GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.45.2 <7>[ 50.799970] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7 <7>[ 50.800101] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000 <7>[ 50.800211] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000 <7>[ 50.800315] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001 <7>[ 50.800434] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a <7>[ 50.800535] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004 <7>[ 50.800632] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000 <7>[ 50.800725] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000 <7>[ 50.800815] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000 <7>[ 50.800904] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000 <7>[ 50.800994] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000 <7>[ 50.801090] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000 <7>[ 50.801194] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000 <7>[ 50.801297] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000 <6>[ 50.802750] xe 0000:00:02.0: [drm] GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 50.805218] xe 0000:00:02.0: [drm] GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 50.806466] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 50.806587] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 50.806747] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 50.808089] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00] <7>[ 50.808249] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00] <7>[ 50.827811] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0 <7>[ 50.828340] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled <7>[ 50.828657] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 50.828916] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 50.829215] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU mask per DSS: 00000000 <7>[ 50.829461] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: EU type: simd16 <7>[ 50.829731] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT1: L3 bank mask: 00000000,0000000f <6>[ 50.829962] xe 0000:00:02.0: [drm] GT1: vcs1 fused off <6>[ 50.829966] xe 0000:00:02.0: [drm] GT1: vcs2 fused off <6>[ 50.829969] xe 0000:00:02.0: [drm] GT1: vcs3 fused off <6>[ 50.829972] xe 0000:00:02.0: [drm] GT1: vcs4 fused off <6>[ 50.829974] xe 0000:00:02.0: [drm] GT1: vcs5 fused off <6>[ 50.829978] xe 0000:00:02.0: [drm] GT1: vcs6 fused off <6>[ 50.829980] xe 0000:00:02.0: [drm] GT1: vcs7 fused off <6>[ 50.829983] xe 0000:00:02.0: [drm] GT1: vecs1 fused off <6>[ 50.829986] xe 0000:00:02.0: [drm] GT1: vecs2 fused off <6>[ 50.829988] xe 0000:00:02.0: [drm] GT1: vecs3 fused off <7>[ 50.830102] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine <7>[ 50.830531] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine <7>[ 50.830981] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine <7>[ 50.833197] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs <7>[ 50.833468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000 <7>[ 50.833717] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000 <7>[ 50.833957] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440 <7>[ 50.834213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000 <7>[ 50.834447] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000 <7>[ 50.834647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f <7>[ 50.834847] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020 <7>[ 50.835050] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000 <7>[ 50.835222] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 50.835399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1 <7>[ 50.835602] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16 <7>[ 50.835772] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 50.835941] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 50.836127] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 50.836308] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 50.836501] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 50.836668] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 50.836824] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 50.836966] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 50.837113] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 50.837254] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 50.837389] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 50.837543] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 50.837686] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 50.837832] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 50.837954] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 50.838087] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 50.838220] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs <7>[ 50.838349] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000 <7>[ 50.838488] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 50.839073] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs <7>[ 50.839200] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000 <7>[ 50.839324] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 50.839867] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs <7>[ 50.840000] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000 <7>[ 50.840115] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 50.840799] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel disabled <7>[ 50.840944] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00df23d7 <7>[ 50.841050] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000 <7>[ 50.841151] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014 <7>[ 50.841247] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001 <7>[ 50.841342] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001e0a <7>[ 50.841439] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004 <7>[ 50.841529] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000 <7>[ 50.841619] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000 <7>[ 50.841708] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000 <7>[ 50.841795] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000 <7>[ 50.841878] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000 <7>[ 50.841955] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000 <7>[ 50.842032] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000 <7>[ 50.842105] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000 <7>[ 50.842201] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs <7>[ 50.842306] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells <7>[ 50.844084] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] GT1: reusable buffer with 2048 dwords at 0x197e000 for xe_guc_init_post_hwconfig [xe] <7>[ 50.862355] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: Updated ADS capture size 24576 (was 45056) <7>[ 50.863426] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00] <7>[ 50.863680] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00] <7>[ 50.883744] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0 <7>[ 50.884208] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT1: GuC CT communication channel enabled <7>[ 50.885395] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vcs0 WA job: 0 dwords <7>[ 50.885651] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 50.888235] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC vecs0 WA job: 0 dwords <7>[ 50.888442] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 50.890353] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT1: LRC gsccs0 WA job: 0 dwords <7>[ 50.890562] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04 <7>[ 50.933971] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC <7>[ 50.934638] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 50.934913] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 1, type 2, Engines: <7>[ 50.935181] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 50.937461] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008 <7>[ 50.937853] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108 <7>[ 50.938242] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208 <7>[ 50.938653] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308 <7>[ 50.939019] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8 <7>[ 50.939447] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 0: start 0x98008 <7>[ 50.939847] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 1: start 0x98108 <7>[ 50.940193] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 2: start 0x98208 <7>[ 50.940560] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 3: start 0x98308 <7>[ 50.940934] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:145:pipe B] FQ 4: start 0x983c8 <7>[ 50.941271] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 0: start 0x52008 <7>[ 50.941625] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 1: start 0x52108 <7>[ 50.941958] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 2: start 0x52208 <7>[ 50.942286] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 3: start 0x52308 <7>[ 50.942631] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:202:pipe C] FQ 4: start 0x523c8 <7>[ 50.943482] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 50.943842] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 50.944203] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 50.944660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:145:pipe B] enable: no [fastset] <7>[ 50.945038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:202:pipe C] enable: no [fastset] <7>[ 50.946845] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 50.947104] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 50.950131] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:145:pipe B] <7>[ 50.950560] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:202:pipe C] <7>[ 50.961705] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:205:eDP-1] adding connector to sysfs <7>[ 50.967153] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:205:eDP-1] backlight device intel_backlight registered <7>[ 50.967485] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 50.967734] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:205:eDP-1] Panel prepare <7>[ 50.968382] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 50.970241] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:205:eDP-1] generating connector hotplug event <7>[ 50.970315] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:214:DP-1] adding connector to sysfs <7>[ 50.970839] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 50.971633] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:214:DP-1] generating connector hotplug event <7>[ 50.971675] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:226:DP-2] adding connector to sysfs <7>[ 50.972164] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 50.973150] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:226:DP-2] generating connector hotplug event <7>[ 50.973196] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:234:DP-3] adding connector to sysfs <7>[ 50.973853] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 50.974601] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:234:DP-3] generating connector hotplug event <6>[ 50.974639] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 50.974677] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 50.984752] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 50.988214] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 50.990050] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 50.990208] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 50.990692] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 50.990697] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 50.992433] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 50.993009] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 50.993068] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 50.993323] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) <7>[ 50.993613] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:214:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.993764] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 50.993940] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) <7>[ 50.994073] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:226:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.994199] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 50.994227] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 50.994349] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:145:pipe B] not active, skipping <7>[ 50.994351] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) <7>[ 50.994479] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:202:pipe C] not active, skipping <7>[ 50.994490] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:234:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 50.994611] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 50.994590] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 50.995110] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 50.995499] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7>[ 50.995508] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7>[ 50.996076] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 50.996414] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 50.996553] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 50.996687] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 50.996892] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 50.996897] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 50.996899] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.996900] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 50.996902] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.996904] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <5>[ 50.996908] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.996909] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 50.996912] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.996937] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7>[ 50.997073] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 50.997190] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 50.997776] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 50.998463] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 50.998471] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 50.998674] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] status updated from unknown to connected <5>[ 50.999099] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 50.999101] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 50.999102] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 50.999129] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7>[ 50.999135] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 50.999139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7>[ 50.999143] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 50.999311] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7>[ 50.999315] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7>[ 50.999318] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 50.999666] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 51.000098] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7>[ 51.000103] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7>[ 51.000106] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 51.000263] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7>[ 51.000266] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7>[ 51.000269] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7>[ 51.000271] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7>[ 51.000273] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7>[ 51.000335] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 51.000350] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2880x1800 <7>[ 51.000353] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 51.000364] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 51.000433] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 51.000440] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 51.008305] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01d9f000 <6>[ 51.010652] fbcon: xedrmfb (fb0) is primary device <7>[ 51.013690] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:205:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 51.013891] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:204:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 51.014042] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 51.014189] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 51.014329] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:204:DDI A/PHY A] [CRTC:88:pipe A] <7>[ 51.014484] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 51.014621] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 51.014752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 51.014881] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 51.015010] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 51.015140] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 51.015267] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 51.015392] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 51.015535] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 51.015662] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 51.015787] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 51.015912] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 51.016037] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 51.016168] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 51.016303] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 51.016442] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 51.016570] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 51.016691] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 51.016819] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 51.016953] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 51.017084] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 51.017207] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 51.017336] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 51.017460] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 51.017587] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 51.017722] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7>[ 51.018160] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 51.018275] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 51.018386] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 12, 13, 0, 0, 0, 3, 0 <7>[ 51.018516] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 289, 313, 0, 0, 38, 73, 87 <7>[ 51.018625] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 319, 346, 0, 0, 39, 82, 88 <7>[ 51.018732] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 51.018837] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.018941] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.019044] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.019146] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 51.019248] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.019351] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.019480] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.019600] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 51.019708] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.019807] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.019916] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.020012] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 51.020107] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.020199] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.020290] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.020380] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 51.020478] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.020567] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.020654] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 51.020762] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1390840 num active planes 1 <7>[ 51.020902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 51.021027] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 51.021137] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 51.021241] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 51.021358] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 51.021534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset] <7>[ 51.021672] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 51.021811] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 51.021929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 51.022045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 51.022161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 51.022274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 51.022387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 51.022531] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 51.022657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 51.022786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 51.022900] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 51.023011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 51.023121] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 51.023214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 51.023312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 51.023428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 51.023534] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 51.023639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 51.023745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 51.023851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 51.023956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0 <7>[ 51.024061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97 <7>[ 51.024172] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 51.024285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 51.024397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 51.024523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 51.024631] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 51.024736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 51.024841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710 <7>[ 51.024948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 51.025052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 51.025156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 51.025259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 51.025357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 51.025469] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 51.025567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 51.025665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 51.025762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.025858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.025953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.026049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 51.026151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 51.026257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.026357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.026458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 51.026561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 51.026662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:206] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 51.026765] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 51.026865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 51.026962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 51.027044] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 51.027126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 51.027207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 51.027287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7>[ 51.036357] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 51.036560] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 51.036686] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 51.036796] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 51.036898] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 51.036992] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 51.037085] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 51.037176] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 51.037266] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 51.037357] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 51.037463] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 51.037559] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 51.037651] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 51.037744] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 51.037835] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 51.037922] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 51.037884] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 51.038009] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 51.038035] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 51.038096] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 51.038184] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 51.038271] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 51.038360] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 51.038453] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 51.038540] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <6>[ 51.038593] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0 <7>[ 51.038627] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 51.038714] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 51.038778] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed <7>[ 51.038800] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 51.038888] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 51.038973] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 51.039059] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 51.039143] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 51.039228] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 51.039312] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 51.039397] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 51.039490] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 51.039577] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 51.039662] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 51.045886] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 51.049423] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 51.051183] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 51.052070] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 51.061777] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC <7>[ 51.239637] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 0 <7>[ 51.241178] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 51.252176] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power off <7>[ 51.252231] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 51.252698] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7>[ 51.252691] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 51.253120] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 51.305330] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 51.305635] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - short <7>[ 51.335465] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 51.335913] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 51.335937] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 51.336767] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 51.336758] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 51.337104] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:204:DDI A/PHY A] <7>[ 51.337456] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DDI TC1/PHY TC1] <7>[ 51.337765] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:215:DP-MST A] <7>[ 51.338073] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DP-MST B] <7>[ 51.338368] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DP-MST C] <7>[ 51.338690] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:225:DDI TC2/PHY TC2] <7>[ 51.339019] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:227:DP-MST A] <7>[ 51.339302] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DP-MST B] <7>[ 51.339611] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:229:DP-MST C] <7>[ 51.339940] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DDI TC3/PHY TC3] <7>[ 51.340214] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST A] <7>[ 51.340499] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DP-MST B] <7>[ 51.340787] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:237:DP-MST C] <7>[ 51.341098] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 51.341900] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 51.342234] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7>[ 51.342527] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 51.342785] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turn panel power on <7>[ 51.342795] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 51.343112] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining) <7>[ 51.486288] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed <7>[ 51.840533] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 51.841243] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 51.841566] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 51.841876] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 51.878207] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 51.878621] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:204:DDI A/PHY A] - long <7>[ 51.878961] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 51.879290] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:204:DDI A/PHY A] <7>[ 52.048698] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) <7>[ 52.048772] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) <7>[ 52.048929] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) <7>[ 52.114086] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 52.116227] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD on <7>[ 52.116678] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 52.119127] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 52.120448] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 52.121429] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 52.122735] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 52.123974] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 52.125141] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 52.125547] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 52.127054] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 52.127444] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:205:eDP-1][ENCODER:204:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 52.128233] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 52.128809] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 52.129195] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 52.129668] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:205:eDP-1] set backlight PWM = 192000 <7>[ 52.145756] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 52.148104] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:205:eDP-1] <7>[ 52.148569] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <7>[ 52.149962] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 52.151340] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 52.152530] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <7>[ 52.153354] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:205:eDP-1] set backlight level = 13892 <6>[ 52.153599] Console: switching to colour frame buffer device 180x56 <6>[ 52.168364] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 52.181616] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 52.181905] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 52.181944] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 52.182353] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 52.182807] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 52.183083] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] <7>[ 52.183113] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:205:eDP-1] <7>[ 52.183216] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 52.183629] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 52.183969] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 52.184293] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 52.184270] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 52.184638] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 52.185021] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 52.185350] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 52.185490] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 52.185779] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 52.185985] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 52.186129] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 52.186458] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 52.186676] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 52.186799] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 52.187105] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 52.187420] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 52.187864] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 52.187881] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.187887] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.187891] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 52.187898] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.187903] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD monitor <7>[ 52.187768] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <5>[ 52.187918] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.187922] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:205:eDP-1] ELD size 20, SAD count 0 <5>[ 52.187929] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.188052] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 52.188047] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] VRR capable: yes <7>[ 52.188369] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 52.188449] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 52.188720] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 52.188838] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:205:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 52.189056] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 52.189383] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <5>[ 52.190580] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.190589] [drm] DisplayID checksum invalid, remainder is 248 <5>[ 52.190594] [drm] DisplayID checksum invalid, remainder is 248 <7>[ 52.190711] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:205:eDP-1] probed modes: <7>[ 52.190731] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 52.190746] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] <7>[ 52.190759] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:214:DP-1] <7>[ 52.190913] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 52.191304] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 52.191301] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) <7>[ 52.191738] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 52.192166] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 52.192598] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 52.192970] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 52.193368] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 52.194449] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 52.194847] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:214:DP-1] disconnected <7>[ 52.194857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] <7>[ 52.194866] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:226:DP-2] <7>[ 52.195200] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) <7>[ 52.195501] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:226:DP-2] disconnected <7>[ 52.195509] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] <7>[ 52.195516] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:234:DP-3] <7>[ 52.195825] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) <7>[ 52.196084] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:234:DP-3] disconnected <7>[ 52.196090] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] enabled? yes <7>[ 52.196098] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:214:DP-1] enabled? no <7>[ 52.196104] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:226:DP-2] enabled? no <7>[ 52.196108] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:234:DP-3] enabled? no <7>[ 52.196386] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 52.196439] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:205:eDP-1] found preferred mode: 2880x1800 <7>[ 52.196445] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 52.196508] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 52.198993] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 52.199331] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 52.199991] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 52.213327] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 52.230681] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 52.230953] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 52.231187] [IGT] xe_module_load: exiting, ret=0 <7>[ 52.291117] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 52.304086] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 52.304328] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 52.305024] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 53.199699] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) <7>[ 53.199724] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) <7>[ 53.199863] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) <7>[ 54.737196] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 turning VDD off <7>[ 54.737750] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:204:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067