<5>[    0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Feb 28 19:51:16 UTC 2025
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   Intel GenuineIntel
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000]   Hygon HygonGenuine
<6>[    0.000000]   Centaur CentaurHauls
<6>[    0.000000]   zhaoxin   Shanghai  
<6>[    0.000000] x86/tme: not enabled by BIOS
<6>[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] APIC: Static calls initialized
<6>[    0.000000] efi: EFI v2.7 by Intel
<6>[    0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000 
<6>[    0.000000] efi: Remove mem279: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[    0.000000] efi: Remove mem281: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[    0.000000] SMBIOS 3.8 present.
<6>[    0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[    0.000000] DMI: Memory slots populated: 8/8
<6>[    0.000000] tsc: Detected 3100.000 MHz processor
<6>[    0.000000] tsc: Detected 3110.400 MHz TSC
<7>[    0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[    0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[    0.000019] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
<6>[    0.000374] x2apic: enabled by BIOS, switching to x2apic ops
<6>[    0.000375] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[    0.004665] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[    0.004673] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[    0.004692] Using GB pages for direct mapping
<6>[    0.005342] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[    0.005343] printk: early log buf free: 258912(98%)
<6>[    0.005344] Secure boot disabled
<6>[    0.005345] ACPI: Early table checksum verification disabled
<6>[    0.005348] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[    0.005351] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005355] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL  LNL      00000002      01000013)
<6>[    0.005358] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL  LNL      00000002      01000013)
<6>[    0.005359] ACPI: FACS 0x000000006FEF1000 000040
<6>[    0.005361] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[    0.005362] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef  Cpu0Ist  00003000 INTL 20210930)
<6>[    0.005364] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef  Cpu0Hwp  00003000 INTL 20210930)
<6>[    0.005365] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20210930)
<6>[    0.005366] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20210930)
<6>[    0.005367] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef  ApIst    00003000 INTL 20210930)
<6>[    0.005369] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef  ApHwp    00003000 INTL 20210930)
<6>[    0.005370] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef  ApPsd    00003000 INTL 20210930)
<6>[    0.005371] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef  ApCst    00003000 INTL 20210930)
<6>[    0.005373] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt  00003000 INTL 20210930)
<6>[    0.005374] ACPI: DTPR 0x000000006FFEC000 000090 (v01                 00000000      00000000)
<6>[    0.005375] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL  PDatTabl 00001000 INTL 20210930)
<6>[    0.005377] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL  IgfxSsdt 00003000 INTL 20210930)
<6>[    0.005378] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL  TseSsdt  00001000 INTL 20210930)
<6>[    0.005379] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL  TcssSsdt 00001000 INTL 20210930)
<6>[    0.005380] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL  IpuSsdt  00001000 INTL 20210930)
<6>[    0.005382] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL  LnlMRvp1 00001000 INTL 20210930)
<6>[    0.005383] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL  I2Pm_Rvp 00001000 INTL 20210930)
<6>[    0.005384] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL  Ther_Rvp 00001000 INTL 20210930)
<6>[    0.005385] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005387] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005388] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL  LNL      00000000      01000013)
<6>[    0.005389] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005390] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL  PepoSsdt 00001000 INTL 20210930)
<6>[    0.005392] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[    0.005393] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[    0.005394] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005395] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL  PtidDevc 00001000 INTL 20210930)
<6>[    0.005397] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL  TbtTypeC 00000000 INTL 20210930)
<6>[    0.005398] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005399] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005401] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005402] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL  UsbCTabl 00001000 INTL 20210930)
<6>[    0.005403] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL  EcSsdt   00000000 INTL 20210930)
<6>[    0.005404] ACPI: ECDT 0x000000006FF85000 000069 (v01        LNL      00000002      01000013)
<6>[    0.005406] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005407] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005408] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL  xh_lnl_m 00000000 INTL 20210930)
<6>[    0.005410] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe   00003000 INTL 20210930)
<6>[    0.005411] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn   00003000 INTL 20210930)
<6>[    0.005412] ACPI: SDEV 0x000000006FFA9000 000046 (v01                 00000000      00000000)
<6>[    0.005413] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL  St09Ssdt 00001000 INTL 20210930)
<6>[    0.005415] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL  Cnv_Ssdt 00001000 INTL 20210930)
<6>[    0.005416] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL  LNL      00000002      01000013)
<6>[    0.005417] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL  LNL      00000005 MSFT 0100000D)
<6>[    0.005419] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005420] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[    0.005421] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[    0.005421] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[    0.005421] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[    0.005422] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[    0.005422] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[    0.005422] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[    0.005422] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[    0.005423] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[    0.005423] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[    0.005423] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[    0.005424] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[    0.005424] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[    0.005424] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[    0.005424] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[    0.005425] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[    0.005425] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[    0.005425] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[    0.005425] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[    0.005426] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[    0.005427] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[    0.005427] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[    0.005427] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[    0.005428] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[    0.005428] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[    0.005428] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[    0.005428] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[    0.005429] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[    0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[    0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[    0.005430] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[    0.005430] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[    0.005430] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[    0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[    0.005431] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[    0.005431] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[    0.005431] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[    0.005432] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[    0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[    0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[    0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[    0.005433] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[    0.005434] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[    0.005434] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[    0.005434] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[    0.005498] APIC: Switched APIC routing to: cluster x2apic
<6>[    0.005700] No NUMA configuration found
<6>[    0.005701] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[    0.005706] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[    0.005815] Zone ranges:
<6>[    0.005816]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.005817]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.005818]   Normal   [mem 0x0000000100000000-0x000000087f7fffff]
<6>[    0.005818]   Device   empty
<6>[    0.005819] Movable zone start for each node
<6>[    0.005819] Early memory node ranges
<6>[    0.005820]   node   0: [mem 0x0000000000001000-0x000000000009efff]
<6>[    0.005821]   node   0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[    0.005821]   node   0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[    0.005821]   node   0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[    0.005823] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[    0.005827] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[    0.005844] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[    0.007871] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[    0.036489] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[    0.036552] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[    0.037016] ACPI: PM-Timer IO Port: 0x1808
<6>[    0.037022] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[    0.037073] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[    0.037074] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.037076] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[    0.037078] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[    0.037078] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[    0.037089] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[    0.037096] TSC deadline timer available
<6>[    0.037097] CPU topo: Max. logical packages:   1
<6>[    0.037098] CPU topo: Max. logical dies:       1
<6>[    0.037098] CPU topo: Max. dies per package:   1
<6>[    0.037099] CPU topo: Max. threads per core:   1
<6>[    0.037100] CPU topo: Num. cores per package:     8
<6>[    0.037100] CPU topo: Num. threads per package:   8
<6>[    0.037100] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[    0.037113] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.037114] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[    0.037115] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[    0.037116] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[    0.037117] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[    0.037118] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[    0.037118] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[    0.037119] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[    0.037119] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[    0.037119] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[    0.037121] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[    0.037122] Booting paravirtualized kernel on bare hardware
<6>[    0.037124] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[    0.037132] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[    0.037478] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[    0.037482] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[    0.037484] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
<5>[    0.037496] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[    0.037574] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[    0.037588] random: crng init done
<6>[    0.039450] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[    0.040374] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[    0.040430] Fallback order for Node 0: 0 
<6>[    0.040433] Built 1 zonelists, mobility grouping on.  Total pages: 8285792
<6>[    0.040433] Policy zone: Normal
<6>[    0.040442] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[    0.040443] stackdepot: allocating hash table via alloc_large_system_hash
<6>[    0.040445] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[    0.041393] software IO TLB: area num 8.
<4>[    0.086770] **********************************************************
<4>[    0.086771] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.086772] **                                                      **
<4>[    0.086772] ** This system shows unhashed kernel memory addresses   **
<4>[    0.086772] ** via the console, logs, and other interfaces. This    **
<4>[    0.086772] ** might reduce the security of your system.            **
<4>[    0.086773] **                                                      **
<4>[    0.086773] ** If you see this message and you are not debugging    **
<4>[    0.086773] ** the kernel, report this immediately to your system   **
<4>[    0.086773] ** administrator!                                       **
<4>[    0.086773] **                                                      **
<4>[    0.086774] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.086774] **********************************************************
<6>[    0.087865] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[    0.088190] ftrace: allocating 59524 entries in 233 pages
<6>[    0.113612] ftrace: allocated 233 pages with 5 groups
<6>[    0.114813] Dynamic Preempt: voluntary
<6>[    0.115263] Running RCU self tests
<6>[    0.115263] Running RCU synchronous self tests
<6>[    0.115264] rcu: Preemptible hierarchical RCU implementation.
<6>[    0.115264] rcu: 	RCU lockdep checking is enabled.
<6>[    0.115265] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[    0.115266] 	Trampoline variant of Tasks RCU enabled.
<6>[    0.115266] 	Rude variant of Tasks RCU enabled.
<6>[    0.115266] 	Tracing variant of Tasks RCU enabled.
<6>[    0.115266] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[    0.115267] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[    0.115306] Running RCU synchronous self tests
<6>[    0.115311] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115314] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115317] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.125392] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[    0.125845] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.126189] Console: colour dummy device 80x25
<6>[    0.126197] printk: legacy console [tty0] enabled
<6>[    0.127410] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[    0.127418] ... MAX_LOCKDEP_SUBCLASSES:  8
<6>[    0.127421] ... MAX_LOCK_DEPTH:          48
<6>[    0.127425] ... MAX_LOCKDEP_KEYS:        8192
<6>[    0.127429] ... CLASSHASH_SIZE:          4096
<6>[    0.127432] ... MAX_LOCKDEP_ENTRIES:     524288
<6>[    0.127436] ... MAX_LOCKDEP_CHAINS:      524288
<6>[    0.127439] ... CHAINHASH_SIZE:          262144
<6>[    0.127443]  memory used by lock dependency info: 54145 kB
<6>[    0.127447]  memory used for stack traces: 4224 kB
<6>[    0.127451]  per task-struct memory footprint: 1920 bytes
<6>[    0.127501] ACPI: Core revision 20240827
<6>[    0.128370] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[    0.128435] APIC: Switch to symmetric I/O mode setup
<6>[    0.128440] DMAR: Host address width 38
<6>[    0.128444] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[    0.128476] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128509] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[    0.128531] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128557] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[    0.128578] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[    0.128611] DMAR: SATC flags: 0x1
<6>[    0.128619] DMAR-IR: IOAPIC id 2 under DRHD base  0xfc820000 IOMMU 2
<6>[    0.128624] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[    0.128628] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[    0.130669] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[    0.135829] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[    0.135847] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[    0.135921] CPU0: Thermal monitoring enabled (TM1)
<6>[    0.135928] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[    0.136105] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[    0.136111] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[    0.136121] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[    0.136128] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[    0.136133] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[    0.136140] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[    0.136146] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[    0.136162] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[    0.136169] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[    0.136175] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[    0.136180] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[    0.136187] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[    0.136193] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
<6>[    0.136199] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
<6>[    0.136204] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
<6>[    0.136210] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[    0.136841] Freeing SMP alternatives memory: 48K
<6>[    0.136841] pid_max: default: 32768 minimum: 301
<6>[    0.136841] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[    0.136841] landlock: Up and running.
<6>[    0.136841] Yama: becoming mindful.
<6>[    0.136841] AppArmor: AppArmor initialized
<6>[    0.136841] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136841] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136841] Running RCU synchronous self tests
<6>[    0.136841] Running RCU synchronous self tests
<6>[    0.136841] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[    0.136841] Running RCU Tasks wait API self tests
<6>[    0.136841] Running RCU Tasks Rude wait API self tests
<6>[    0.136841] Running RCU Tasks Trace wait API self tests
<6>[    0.136841] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[    0.136841] core: cpu_core PMU driver: 
<6>[    0.136846] ... version:                6
<6>[    0.136850] ... bit width:              48
<6>[    0.136854] ... generic registers:      10
<6>[    0.136858] ... value mask:             0000ffffffffffff
<6>[    0.136863] ... max period:             00007fffffffffff
<6>[    0.136868] ... fixed-purpose events:   4
<6>[    0.136872] ... event mask:             0001000f000003ff
<6>[    0.136905] signal: max sigframe size: 3632
<6>[    0.136929] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[    0.137014] rcu: Hierarchical SRCU implementation.
<6>[    0.137018] rcu: 	Max phase no-delay instances is 400.
<6>[    0.137913] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[    0.139733] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[    0.140002] smp: Bringing up secondary CPUs ...
<6>[    0.140348] smpboot: x86: Booting SMP configuration:
<6>[    0.140355] .... node  #0, CPUs:      #1 #2
<6>[    0.142961] Callback from call_rcu_tasks_trace() invoked.
<4>[    0.145923]  #3 #4 #5 #6 #7
<6>[    0.010810] core: cpu_atom PMU driver: 
<6>[    0.010810] ... version:                6
<6>[    0.010810] ... bit width:              48
<6>[    0.010810] ... generic registers:      8
<6>[    0.010810] ... value mask:             0000ffffffffffff
<6>[    0.010810] ... max period:             00007fffffffffff
<6>[    0.010810] ... fixed-purpose events:   6
<6>[    0.010810] ... event mask:             00000077000000ff
<6>[    0.155972] smp: Brought up 1 node, 8 CPUs
<6>[    0.157150] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[    0.159115] Memory: 32345040K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[    0.159844] devtmpfs: initialized
<6>[    0.160764] x86/mm: Memory block size: 128MB
<6>[    0.177413] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[    0.178272] Running RCU synchronous self tests
<6>[    0.178285] Running RCU synchronous self tests
<6>[    0.178302] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.178302] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[    0.178302] pinctrl core: initialized pinctrl subsystem
<6>[    0.179246] PM: RTC time: 03:21:25, date: 2025-03-01
<6>[    0.180226] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.181122] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.181425] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.181710] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.181773] audit: initializing netlink subsys (disabled)
<5>[    0.181954] audit: type=2000 audit(1740799285.046:1): state=initialized audit_enabled=0 res=1
<6>[    0.182516] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.182518] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.182524] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.182529] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.182533] thermal_sys: Registered thermal governor 'power_allocator'
<6>[    0.182880] EISA bus registered
<6>[    0.182906] cpuidle: using governor ladder
<6>[    0.182922] cpuidle: using governor menu
<6>[    0.182948] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    0.183353] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[    0.183384] PCI: Using configuration type 1 for base access
<6>[    0.184035] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[    0.185886] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[    0.185893] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[    0.185899] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[    0.185905] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[    0.205842] raid6: avx2x4   gen() 77485 MB/s
<6>[    0.222843] raid6: avx2x2   gen() 83091 MB/s
<6>[    0.239847] raid6: avx2x1   gen() 71167 MB/s
<6>[    0.239851] raid6: using algorithm avx2x2 gen() 83091 MB/s
<6>[    0.256843] raid6: .... xor() 52752 MB/s, rmw enabled
<6>[    0.256848] raid6: using avx2x2 recovery algorithm
<6>[    0.260232] fbcon: Taking over console
<6>[    0.261522] ACPI: Added _OSI(Module Device)
<6>[    0.261574] ACPI: Added _OSI(Processor Device)
<6>[    0.261619] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.261663] ACPI: Added _OSI(Processor Aggregator Device)
<6>[    0.941813] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[    0.981320] ACPI: EC: EC started
<6>[    0.981344] ACPI: EC: interrupt blocked
<6>[    0.988658] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[    0.988671] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[    1.010325] Callback from call_rcu_tasks() invoked.
<6>[    1.294030] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.294051] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.360979] ACPI: Interpreter enabled
<6>[    1.361179] ACPI: PM: (supports S0 S4 S5)
<6>[    1.361189] ACPI: Using IOAPIC for interrupt routing
<6>[    1.374958] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    1.374977] PCI: Ignoring E820 reservations for host bridge windows
<6>[    1.425068] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[    1.425122] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[    1.483947] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[    1.484733] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[    1.493162] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[    1.826905] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[    1.840182] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[    2.020772] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[    2.025645] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[    2.047073] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[    2.068672] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[    2.069252] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[    2.069819] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[    2.162343] ACPI: \: Can't tag data node
<3>[    2.163529] ACPI: \: Can't tag data node
<3>[    2.165046] ACPI: \: Can't tag data node
<3>[    2.166100] ACPI: \: Can't tag data node
<3>[    2.167235] ACPI: \: Can't tag data node
<6>[    2.409323] ACPI: \_TZ_.FN00: New power resource
<6>[    2.409831] ACPI: \_TZ_.FN01: New power resource
<6>[    2.410559] ACPI: \_TZ_.FN02: New power resource
<6>[    2.411041] ACPI: \_TZ_.FN03: New power resource
<6>[    2.411519] ACPI: \_TZ_.FN04: New power resource
<6>[    2.412821] ACPI: \PIN_: New power resource
<6>[    2.417931] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[    2.417974] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[    2.424792] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[    2.449449] PCI host bridge to bus 0000:00
<6>[    2.449529] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    2.449550] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    2.449568] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    2.449587] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[    2.449608] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[    2.449631] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[    2.454156] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[    2.454758] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[    2.454845] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[    2.454854] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[    2.454863] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[    2.454907] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[    2.456139] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[    2.456168] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[    2.457416] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[    2.457448] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[    2.457456] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[    2.458623] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[    2.458668] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.458681] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[    2.458701] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[    2.458841] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[    2.458992] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[    2.464109] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[    2.464154] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.464166] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[    2.464185] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[    2.464307] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[    2.464363] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[    2.468476] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[    2.468525] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.468537] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[    2.468555] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[    2.468672] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[    2.468728] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[    2.472853] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[    2.472890] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[    2.472904] pci 0000:00:0a.0: enabling Extended Tags
<6>[    2.473101] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[    2.473130] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[    2.473137] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[    2.473532] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.473585] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[    2.473656] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[    2.475448] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.475501] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[    2.475509] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[    2.475567] pci 0000:00:0d.2: supports D1 D2
<6>[    2.475571] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.476769] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.476821] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[    2.476829] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[    2.476887] pci 0000:00:0d.3: supports D1 D2
<6>[    2.476891] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.478485] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[    2.478543] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[    2.478611] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[    2.480982] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.481075] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[    2.481172] pci 0000:00:13.0: PME# supported from D3hot
<6>[    2.481556] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.481609] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[    2.481676] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[    2.483768] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[    2.483832] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[    2.483841] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[    2.484127] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.484234] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.485620] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.485730] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.498724] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.499090] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.502855] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.503027] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.506431] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.506582] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[    2.506852] pci 0000:00:16.0: PME# supported from D3hot
<6>[    2.513207] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[    2.513326] pci 0000:00:16.3: BAR 0 [io  0x4020-0x4027]
<6>[    2.513342] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[    2.514107] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[    2.514196] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.514217] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[    2.514237] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[    2.514472] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    2.514557] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[    2.526392] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[    2.526531] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.526585] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[    2.527405] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[    2.527586] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[    2.540680] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[    2.544386] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[    2.544621] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[    2.544657] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[    2.544894] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[    2.546270] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[    2.546444] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[    2.546472] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
<6>[    2.549664] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.549987] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[    2.550909] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[    2.551019] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[    2.551145] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[    2.554208] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[    2.554309] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[    2.554328] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[    2.554345] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[    2.555028] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.555390] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.555745] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.556124] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[    2.556237] pci 0000:7f:00.0: BAR 0 [io  0x3000-0x30ff]
<6>[    2.556257] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[    2.556275] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[    2.556536] pci 0000:7f:00.0: supports D1 D2
<6>[    2.556545] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.557620] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.560199] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.560906] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[    2.561009] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[    2.562321] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.562439] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    3.010812] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[   13.226437] Low-power S0 idle used by default for system suspend
<6>[   13.280514] ACPI: EC: interrupt unblocked
<6>[   13.280525] ACPI: EC: event unblocked
<6>[   13.280560] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[   13.280566] ACPI: EC: GPE=0x6e
<6>[   13.280572] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[   13.280581] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[   13.281049] iommu: Default domain type: Translated
<6>[   13.281049] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[   13.282646] SCSI subsystem initialized
<7>[   13.283381] libata version 3.00 loaded.
<6>[   13.283486] ACPI: bus type USB registered
<6>[   13.283555] usbcore: registered new interface driver usbfs
<6>[   13.283589] usbcore: registered new interface driver hub
<6>[   13.283627] usbcore: registered new device driver usb
<6>[   13.283749] pps_core: LinuxPPS API ver. 1 registered
<6>[   13.283754] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[   13.283771] PTP clock support registered
<6>[   13.284151] EDAC MC: Ver: 3.0.0
<6>[   13.286047] efivars: Registered efivars operations
<6>[   13.288907] NetLabel: Initializing
<6>[   13.288919] NetLabel:  domain hash size = 128
<6>[   13.288929] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
<6>[   13.289084] NetLabel:  unlabeled traffic allowed by default
<6>[   13.289119] mctp: management component transport protocol core
<6>[   13.289133] NET: Registered PF_MCTP protocol family
<6>[   13.289213] PCI: Using ACPI for IRQ routing
<7>[   13.337157] PCI: pci_cache_line_size set to 64 bytes
<6>[   13.337476] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[   13.337695] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[   13.337712] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[   13.337718] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[   13.337723] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[   13.337728] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[   13.339111] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[   13.339111] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[   13.339111] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[   13.339111] vgaarb: loaded
<6>[   13.340230] clocksource: Switched to clocksource tsc-early
<5>[   13.342487] VFS: Disk quotas dquot_6.6.0
<6>[   13.342539] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[   13.344657] AppArmor: AppArmor Filesystem Enabled
<6>[   13.345025] pnp: PnP ACPI init
<6>[   13.346949] system 00:00: [io  0x0680-0x069f] has been reserved
<6>[   13.346971] system 00:00: [io  0x164e-0x164f] has been reserved
<6>[   13.350048] system 00:02: [io  0x06a4] has been reserved
<6>[   13.350070] system 00:02: [io  0x06a0] has been reserved
<6>[   13.400088] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[   13.400118] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[   13.400145] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[   13.400165] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[   13.400185] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[   13.400208] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[   13.400231] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[   13.400251] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[   13.408333] system 00:04: [io  0x2000-0x20fe] has been reserved
<6>[   13.414643] system 00:06: [io  0x1854-0x1857] has been reserved
<6>[   13.414980] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[   13.425581] pnp: PnP ACPI: found 8 devices
<6>[   13.453289] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[   13.453717] NET: Registered PF_INET protocol family
<6>[   13.453987] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   13.458045] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[   13.458350] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[   13.458640] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   13.459715] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[   13.461584] TCP: Hash tables configured (established 262144 bind 65536)
<6>[   13.462074] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   13.462972] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   13.463787] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[   13.463860] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[   13.463873] pci 0000:00:07.1: bridge window [io  0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[   13.463882] pci 0000:00:07.2: bridge window [io  0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[   13.463927] pci 0000:00:07.0: bridge window [io  0x5000-0x5fff]: assigned
<6>[   13.463934] pci 0000:00:07.1: bridge window [io  0x6000-0x6fff]: assigned
<6>[   13.463940] pci 0000:00:07.2: bridge window [io  0x7000-0x7fff]: assigned
<6>[   13.463947] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[   13.463997] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[   13.464046] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[   13.464096] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[   13.464148] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[   13.464185] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[   13.464197] pci 0000:00:07.0:   bridge window [io  0x5000-0x5fff]
<6>[   13.464207] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[   13.464216] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   13.464229] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[   13.464235] pci 0000:00:07.1:   bridge window [io  0x6000-0x6fff]
<6>[   13.464252] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[   13.464261] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   13.464274] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[   13.464280] pci 0000:00:07.2:   bridge window [io  0x7000-0x7fff]
<6>[   13.464290] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[   13.464299] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   13.464313] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[   13.464319] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[   13.464328] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[   13.464342] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[   13.464378] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[   13.464425] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<6>[   13.464431] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<6>[   13.464436] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[   13.464442] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[   13.464448] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[   13.464454] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
<6>[   13.464460] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[   13.464465] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   13.464472] pci_bus 0000:2b: resource 0 [io  0x6000-0x6fff]
<6>[   13.464477] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[   13.464482] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   13.464489] pci_bus 0000:55: resource 0 [io  0x7000-0x7fff]
<6>[   13.464494] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[   13.464500] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   13.464506] pci_bus 0000:7f: resource 0 [io  0x3000-0x3fff]
<6>[   13.464511] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[   13.464517] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[   13.465558] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[   13.467002] PCI: CLS 0 bytes, default 64
<6>[   13.467095] DMAR: No RMRR found
<6>[   13.467103] DMAR: No ATSR found
<6>[   13.467106] DMAR: dmar1: Using Queued invalidation
<6>[   13.467164] DMAR: dmar0: Using Queued invalidation
<6>[   13.467171] DMAR: dmar2: Using Queued invalidation
<6>[   13.468409] pci 0000:00:04.0: Adding to iommu group 0
<6>[   13.468476] pci 0000:00:05.0: Adding to iommu group 1
<6>[   13.468538] pci 0000:00:0a.0: Adding to iommu group 2
<6>[   13.468590] pci 0000:00:0b.0: Adding to iommu group 3
<6>[   13.471937] pci 0000:00:02.0: Adding to iommu group 4
<6>[   13.472900] pci 0000:00:00.0: Adding to iommu group 5
<6>[   13.472958] pci 0000:00:07.0: Adding to iommu group 6
<6>[   13.473009] pci 0000:00:07.1: Adding to iommu group 7
<6>[   13.473061] pci 0000:00:07.2: Adding to iommu group 8
<6>[   13.473134] pci 0000:00:0d.0: Adding to iommu group 9
<6>[   13.473171] pci 0000:00:0d.2: Adding to iommu group 9
<6>[   13.473206] pci 0000:00:0d.3: Adding to iommu group 9
<6>[   13.473264] pci 0000:00:12.0: Adding to iommu group 10
<6>[   13.473316] pci 0000:00:13.0: Adding to iommu group 11
<6>[   13.473381] pci 0000:00:14.0: Adding to iommu group 12
<6>[   13.473416] pci 0000:00:14.2: Adding to iommu group 12
<6>[   13.473498] pci 0000:00:15.0: Adding to iommu group 13
<6>[   13.473534] pci 0000:00:15.1: Adding to iommu group 13
<6>[   13.473575] pci 0000:00:15.2: Adding to iommu group 13
<6>[   13.473611] pci 0000:00:15.3: Adding to iommu group 13
<6>[   13.473679] pci 0000:00:16.0: Adding to iommu group 14
<6>[   13.473717] pci 0000:00:16.3: Adding to iommu group 14
<6>[   13.473765] pci 0000:00:1c.0: Adding to iommu group 15
<6>[   13.473854] pci 0000:00:1c.4: Adding to iommu group 16
<6>[   13.473952] pci 0000:00:1f.0: Adding to iommu group 17
<6>[   13.473992] pci 0000:00:1f.3: Adding to iommu group 17
<6>[   13.474031] pci 0000:00:1f.4: Adding to iommu group 17
<6>[   13.474070] pci 0000:00:1f.5: Adding to iommu group 17
<6>[   13.474107] pci 0000:00:1f.6: Adding to iommu group 17
<6>[   13.474147] pci 0000:00:1f.7: Adding to iommu group 17
<6>[   13.474198] pci 0000:7f:00.0: Adding to iommu group 18
<6>[   13.474273] pci 0000:80:00.0: Adding to iommu group 19
<6>[   13.482668] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[   13.482676] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[   13.482680] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[   13.488080] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[   13.488278] clocksource: Switched to clocksource tsc
<6>[   13.489070] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[   13.492840] Initialise system trusted keyrings
<5>[   13.492892] Key type blacklist registered
<6>[   13.493346] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[   13.499312] zbud: loaded
<6>[   13.500321] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[   13.500394] ntfs3: Enabled Linux POSIX ACLs support
<6>[   13.500398] ntfs3: Read-only LZX/Xpress compression included
<5>[   13.500683] integrity: Platform Keyring initialized
<5>[   13.500697] integrity: Machine keyring initialized
<6>[   13.504636] xor: automatically using best checksumming function   avx       
<5>[   13.504642] Key type asymmetric registered
<5>[   13.504649] Asymmetric key parser 'x509' registered
<6>[   13.504717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[   13.505166] io scheduler mq-deadline registered
<6>[   13.505982] ledtrig-cpu: registered to indicate activity on CPUs
<6>[   13.506985] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[   13.507440] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[   13.508221] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[   13.508609] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[   13.509370] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[   13.509648] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[   13.510352] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[   13.510608] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[   13.511627] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[   13.511945] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[   13.512401] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[   13.514095] Monitor-Mwait will be used to enter C-1 state
<7>[   13.514102] Monitor-Mwait will be used to enter C-2 state
<7>[   13.514105] Monitor-Mwait will be used to enter C-3 state
<6>[   13.523072] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[   13.523185] ACPI: button: Lid Switch [LID0]
<6>[   13.523332] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[   13.523432] ACPI: button: Sleep Button [SLPB]
<6>[   13.523555] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[   13.523707] ACPI: button: Power Button [PWRB]
<4>[   13.538429] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.545559] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.553328] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.561441] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.570152] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.578406] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.585874] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[   13.592756] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[   13.707783] thermal LNXTHERM:00: registered as thermal_zone0
<6>[   13.707793] ACPI: thermal: Thermal Zone [TZ00] (63 C)
<6>[   13.709593] ACPI: battery: Slot [BAT1] (battery absent)
<6>[   13.710007] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[   13.711025] ACPI: battery: Slot [BAT0] (battery present)
<6>[   13.732969] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[   13.748098] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[   13.750769] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[   13.773692] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[   13.777506] hpet_acpi_add: no address or irqs in _CRS
<6>[   13.777726] Linux agpgart interface v0.103
<6>[   13.778524] ACPI: bus type drm_connector registered
<6>[   13.800407] loop: module loaded
<6>[   13.842911] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[   13.952931] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[   14.093903] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[   14.222923] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[   14.383452] Key type psk registered
<6>[   14.387578] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[   14.388332] nvme nvme0: pci function 0000:80:00.0
<6>[   14.388486] tun: Universal TUN/TAP device driver, 1.6
<6>[   14.389362] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   14.389498] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[   14.391438] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   14.394985] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   14.395022] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[   14.395049] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   14.395437] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   14.395461] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.395472] usb usb1: Product: xHCI Host Controller
<6>[   14.395479] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   14.395489] usb usb1: SerialNumber: 0000:00:0d.0
<6>[   14.396695] hub 1-0:1.0: USB hub found
<6>[   14.396769] hub 1-0:1.0: 1 port detected
<6>[   14.400356] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   14.400372] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.400383] usb usb2: Product: xHCI Host Controller
<6>[   14.400390] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   14.400399] usb usb2: SerialNumber: 0000:00:0d.0
<6>[   14.401020] hub 2-0:1.0: USB hub found
<6>[   14.401075] hub 2-0:1.0: 3 ports detected
<6>[   14.424167] nvme nvme0: 8/0/0 default/read/poll queues
<6>[   14.426209] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   14.426250] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[   14.428072] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   14.429954] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   14.429986] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[   14.430011] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   14.430271] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   14.430287] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.430297] usb usb3: Product: xHCI Host Controller
<6>[   14.430305] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   14.430313] usb usb3: SerialNumber: 0000:00:14.0
<6>[   14.431058] hub 3-0:1.0: USB hub found
<6>[   14.431118] hub 3-0:1.0: 8 ports detected
<6>[   14.432441]  nvme0n1: p1 p2
<6>[   14.453852] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   14.453866] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.453872] usb usb4: Product: xHCI Host Controller
<6>[   14.453876] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[   14.453881] usb usb4: SerialNumber: 0000:00:14.0
<6>[   14.454901] hub 4-0:1.0: USB hub found
<6>[   14.454936] hub 4-0:1.0: 2 ports detected
<6>[   14.471075] usbcore: registered new interface driver usb-storage
<6>[   14.471287] usbcore: registered new interface driver usbserial_generic
<6>[   14.471429] usbserial: USB Serial support registered for generic
<6>[   14.471517] usbcore: registered new interface driver ftdi_sio
<6>[   14.471576] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[   14.471662] usbcore: registered new interface driver pl2303
<6>[   14.471726] usbserial: USB Serial support registered for pl2303
<6>[   14.471923] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[   14.471938] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[   15.187905] i8042: Can't read CTR while initializing i8042
<3>[   15.187921] i8042 i8042: probe with driver i8042 failed with error -5
<6>[   15.190447] mousedev: PS/2 mouse device common for all mice
<6>[   15.192649] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[   15.195225] rtc_cmos rtc_cmos: registered as rtc0
<6>[   15.195487] rtc_cmos rtc_cmos: setting system clock to 2025-03-01T03:21:40 UTC (1740799300)
<6>[   15.195794] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[   15.195903] i2c_dev: i2c /dev entries driver
<6>[   15.202737] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[   15.202752] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[   15.202758] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[   15.202787] device-mapper: uevent: version 1.0.3
<6>[   15.205138] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[   15.205624] platform eisa.0: Probing EISA bus 0
<4>[   15.205639] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[   15.205656] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[   15.205671] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[   15.205684] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[   15.205695] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[   15.205707] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[   15.205719] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[   15.205732] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[   15.205743] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[   15.205753] platform eisa.0: EISA: Detected 0 cards
<6>[   15.205763] intel_pstate: Intel P-state driver initializing
<6>[   15.209657] Hybrid CPU capacity scaling enabled
<6>[   15.211924] intel_pstate: HWP enabled
<6>[   15.211936] sdhci: Secure Digital Host Controller Interface driver
<6>[   15.211948] sdhci: Copyright(c) Pierre Ossman
<6>[   15.212135] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[   15.215916] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[   15.216846] drop_monitor: Initializing network drop monitor service
<6>[   15.217098] NET: Registered PF_INET6 protocol family
<6>[   15.220369] Segment Routing with IPv6
<6>[   15.220449] In-situ OAM (IOAM) with IPv6
<6>[   15.220521] NET: Registered PF_PACKET protocol family
<5>[   15.220828] Key type dns_resolver registered
<4>[   15.224957] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[   15.225221] microcode: Current revision: 0x0000011b
<6>[   15.225942] IPI shorthand broadcast: enabled
<6>[   15.237233] sched_clock: Marking stable (15227002298, 9810240)->(15326182107, -89369569)
<6>[   15.238012] registered taskstats version 1
<5>[   15.239222] Loading compiled-in X.509 certificates
<6>[   15.269145] Demotion targets for Node 0: null
<6>[   15.269361] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[   15.269364] kmemleak: Automatic memory scanning thread started
<5>[   15.269585] Key type .fscrypt registered
<5>[   15.269590] Key type fscrypt-provisioning registered
<6>[   15.272170] Btrfs loaded, zoned=yes, fsverity=yes
<5>[   15.274213] Key type encrypted registered
<6>[   15.274227] AppArmor: AppArmor sha256 policy hashing enabled
<6>[   15.274415] ima: No TPM chip found, activating TPM-bypass!
<5>[   15.274442] Loading compiled-in module X.509 certificates
<5>[   15.275176] Loaded X.509 cert 'Build time autogenerated kernel key: 9d5fe5c4f83f67e4345214237eea2dfd8deead0b'
<6>[   15.275187] ima: Allocated hash algorithm: sha256
<6>[   15.275234] ima: No architecture policies found
<6>[   15.275325] evm: Initialising EVM extended attributes:
<6>[   15.275329] evm: security.selinux
<6>[   15.275332] evm: security.SMACK64
<6>[   15.275335] evm: security.SMACK64EXEC
<6>[   15.275338] evm: security.SMACK64TRANSMUTE
<6>[   15.275341] evm: security.SMACK64MMAP
<6>[   15.275344] evm: security.apparmor
<6>[   15.275346] evm: security.ima
<6>[   15.275349] evm: security.capability
<6>[   15.275352] evm: HMAC attrs: 0x1
<6>[   15.277497] PM:   Magic number: 1:194:360
<6>[   15.277567] acpi ACPI0007:18: hash matches
<6>[   15.277733] printk: legacy console [netcon0] enabled
<6>[   15.277739] netconsole: network logging started
<6>[   15.278286] RAS: Correctable Errors collector initialized.
<6>[   15.278710] clk: Disabling unused clocks
<6>[   15.278722] PM: genpd: Disabling unused power domains
<6>[   15.279218] md: Waiting for all devices to be available before autodetect
<6>[   15.279225] md: If you don't use raid, use raid=noautodetect
<6>[   15.279231] md: Autodetecting RAID arrays.
<6>[   15.279241] md: autorun ...
<6>[   15.279244] md: ... autorun DONE.
<6>[   15.327779] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none.
<6>[   15.327854] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[   15.328589] devtmpfs: mounted
<6>[   15.340884] Freeing unused decrypted memory: 2028K
<6>[   15.341683] Freeing unused kernel image (initmem) memory: 5632K
<6>[   15.341706] Write protecting the kernel read-only data: 34816k
<6>[   15.341960] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[   15.342216] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[   15.347955] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[   15.348339] Run /sbin/init as init process
<7>[   15.348344]   with arguments:
<7>[   15.348345]     /sbin/init
<7>[   15.348346]   with environment:
<7>[   15.348347]     HOME=/
<7>[   15.348348]     TERM=linux
<7>[   15.348349]     BOOT_IMAGE=/boot/drm_intel
<7>[   15.402104] systemd[1]: Inserted module 'autofs4'
<7>[   15.429464] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[   15.429581] systemd[1]: Detected architecture x86-64.
<7>[   15.432874] systemd[1]: Hostname set to <shard-lnl-8>.
<7>[   15.709448] systemd[1]: Queued start job for default target graphical.target.
<7>[   15.747211] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[   15.749061] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[   15.750420] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[   15.750672] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[   15.751367] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[   15.751479] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8...
<7>[   15.751557] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[   15.751638] systemd[1]: Reached target slices.target - Slice Units.
<7>[   15.751704] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[   15.751772] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[   15.751848] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[   15.752154] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[   15.752542] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[   15.752825] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[   15.753188] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[   15.753433] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[   15.753623] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[   15.753922] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[   15.754290] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[   15.754576] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[   15.754748] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.755075] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[   15.755364] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[   15.758743] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[   15.761387] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[   15.764107] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[   15.766743] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[   15.772438] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[   15.775842] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[   15.779750] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[   15.782784] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[   15.785521] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[   15.788215] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[   15.791727] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[   15.797288] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[   15.801912] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[   15.805147] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[   15.810219] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[   15.810476] systemd-journald[211]: Collecting audit messages is disabled.
<7>[   15.811804] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[   15.817077] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[   15.818625] pstore: Using crash dump compression: deflate
<6>[   15.819600] pstore: Registered efi_pstore as persistent store backend
<7>[   15.822681] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[   15.822792] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.822869] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.829659] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[   15.829710] fuse: init (API version 7.42)
<7>[   15.835284] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[   16.001623] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. Quota mode: none.
<6>[   16.033865] Adding 8388604k swap on /swap.img.  Priority:-2 extents:66 across:274595840k SS
<7>[   16.059121] systemd-journald[211]: Received client request to flush runtime journal.
<7>[   16.074497] systemd-journald[211]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[   16.074513] systemd-journald[211]: Rotating system journal.
<4>[   16.748636] nvme nvme0: using unchecked data buffer
<6>[   16.853530] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[   16.863391] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863415] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863440] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863464] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863477] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863489] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863502] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863514] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863527] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863539] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863552] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863564] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863577] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863589] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863602] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863614] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863627] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863662] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863674] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863687] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863699] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863712] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863735] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863748] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863760] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863777] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863789] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863839] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863864] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863888] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863913] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863938] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.863991] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.864011] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.864035] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.864060] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.864085] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.864109] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886494] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886518] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886542] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886555] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886567] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886591] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886615] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886628] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886729] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886760] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886776] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886796] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886926] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886949] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.886974] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887010] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887046] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887070] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887095] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887120] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887144] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887169] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887193] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887218] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887231] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887243] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887256] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887268] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887281] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.887293] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.916685] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[   16.927074] intel-hid INTC107B:00: platform supports 5 button array
<4>[   16.929572] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929597] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929616] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929636] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929658] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929676] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929696] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929765] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929785] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929805] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929956] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929974] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.929994] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930014] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930034] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930054] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930074] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930094] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930162] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930182] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930202] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930222] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930302] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930322] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930342] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930398] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930418] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930438] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930458] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930490] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930510] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930530] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930550] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930570] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930590] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930609] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930629] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930649] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.930669] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.931084] pci 0000:00:05.0: Setting to D3hot
<6>[   16.933515] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[   16.943378] pci 0000:00:0b.0: Setting to D3hot
<4>[   16.959601] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[   16.960206] intel_pmc_core INT33A1:00:  initialized
<4>[   16.982612] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.982638] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022726] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022751] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022771] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022791] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022818] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022836] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022857] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022876] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022896] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022942] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.022962] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023002] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023022] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023046] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023067] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023087] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023106] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023150] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023172] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023192] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023212] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023234] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023254] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023274] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023294] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023320] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023353] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023373] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023393] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023424] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023444] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023464] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023484] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023504] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023524] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023544] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023564] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023584] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023604] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023623] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023643] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023663] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023683] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023703] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   17.023723] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<3>[   17.059641] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[   17.068398] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<5>[   17.089621] audit: type=1400 audit(1740799302.392:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=428 comm="apparmor_parser"
<5>[   17.091222] audit: type=1400 audit(1740799302.394:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=429 comm="apparmor_parser"
<5>[   17.092271] audit: type=1400 audit(1740799302.395:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=427 comm="apparmor_parser"
<5>[   17.095118] audit: type=1400 audit(1740799302.398:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=430 comm="apparmor_parser"
<5>[   17.096312] audit: type=1400 audit(1740799302.399:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=432 comm="apparmor_parser"
<5>[   17.098058] audit: type=1400 audit(1740799302.401:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=437 comm="apparmor_parser"
<5>[   17.098394] audit: type=1400 audit(1740799302.401:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=434 comm="apparmor_parser"
<5>[   17.103235] audit: type=1400 audit(1740799302.406:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=433 comm="apparmor_parser"
<5>[   17.111391] audit: type=1400 audit(1740799302.414:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chrome" pid=441 comm="apparmor_parser"
<5>[   17.114821] audit: type=1400 audit(1740799302.417:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=435 comm="apparmor_parser"
<6>[   17.375308] ACPI: bus type thunderbolt registered
<6>[   17.431224] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[   17.460769] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[   17.460780] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[   17.485072] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[   17.486938] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[   17.501269] e1000e: Intel(R) PRO/1000 Network Driver
<6>[   17.501276] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[   17.502088] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[   17.503926] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[   17.505639] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[   17.513774] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[   17.514240] intel_rapl_common: Found RAPL domain package
<6>[   17.514247] intel_rapl_common: Found RAPL domain dram
<6>[   17.514828] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[   17.533337] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[   17.536379] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[   17.569851] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[   17.673616] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 184
<6>[   17.673627] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[   17.691925] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[   17.691930] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[   17.691931] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[   17.691932] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[   17.691933] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[   17.716260] cryptd: max_cpu_qlen set to 1000
<6>[   17.797605] AES CTR mode by8 optimization enabled
<4>[   17.972791] block nvme0n1: No UUID available providing old NGUID
<6>[   18.001507] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[   18.153031] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:91
<6>[   18.153041] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[   18.156010] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[   18.324994] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[   18.352126] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[   18.352131] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[   18.352133] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[   18.356590] intel_rapl_common: Found RAPL domain package
<6>[   18.356596] intel_rapl_common: Found RAPL domain core
<6>[   18.356599] intel_rapl_common: Found RAPL domain dram
<6>[   18.356601] intel_rapl_common: Found RAPL domain psys
<6>[   18.385877] evm: overlay not supported
<6>[   18.514444] loop0: detected capacity change from 0 to 8
<4>[   18.518198] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[   18.563918] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[   18.563947] 0x000000000000-0x000002000000 : "BIOS"
<6>[   18.603926] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[   18.653910] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[   18.971020] Consider using thermal netlink events interface
<6>[   19.018933] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[   19.145109] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[   19.356612] hid: raw HID events driver (C) Jiri Kosina
<6>[   19.362783] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[   19.397464] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.398654] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.400000] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.400673] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.401854] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.402457] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.406792] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.409342] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.411792] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.413661] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.415701] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.417284] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.994834] typec port0: bound usb3-port1 (ops connector_ops)
<6>[   19.994861] typec port0: bound usb2-port1 (ops connector_ops)
<6>[   20.912061] typec port1: bound usb3-port2 (ops connector_ops)
<6>[   20.912085] typec port1: bound usb2-port2 (ops connector_ops)
<6>[   24.340325] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[   36.725802] systemd-journald[211]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[   52.769041] [IGT] xe_module_load: executing
<7>[   52.778949] [IGT] xe_module_load: starting subtest load
<5>[   52.965754] Setting dangerous option force_probe - tainting kernel
<6>[   52.968597] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[   52.970005] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[   52.970014] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE  64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[   52.970115] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[   52.970201] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[   52.974076] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[   52.977973] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[   52.978081] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[   52.978153] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[   52.978216] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   52.978277] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[   52.978336] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   52.978393] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   52.978449] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   52.978504] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   52.978557] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   52.978610] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   52.978661] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   52.978713] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   52.978764] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   52.978822] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   52.978937] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[   52.980203] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000066 [0x33/00]
<7>[   52.980287] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   52.990060] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   52.990890] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   52.990978] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[   52.991083] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[   52.991159] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,0000007f
<7>[   52.991231] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     000000ff
<7>[   52.991301] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   52.991368] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,000000ff
<6>[   52.991974] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[   52.995965] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[   52.996062] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   52.996134] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[   52.996200] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   52.996261] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[   52.996321] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   52.996381] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   52.996440] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   52.996496] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   52.996553] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   52.996612] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   52.996668] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   52.996724] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   52.996778] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[   52.998417] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[   53.001397] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[   53.002466] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[   53.002619] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   53.002782] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[   53.004497] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   53.004668] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   53.023861] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   53.024306] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   53.024486] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[   53.024667] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[   53.024852] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,00000000
<7>[   53.025024] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     00000000
<7>[   53.025189] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   53.025353] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,0000000f
<7>[   53.026186] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[   53.026558] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[   53.026873] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[   53.027185] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[   53.027443] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[   53.027675] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[   53.027917] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[   53.028139] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[   53.028409] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[   53.028676] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[   53.028972] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[   53.029273] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[   53.029539] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[   53.029830] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[   53.030103] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[   53.030373] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[   53.030632] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[   53.030897] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[   53.031213] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   53.031470] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   53.031719] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[   53.031984] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   53.032255] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   53.032475] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   53.032682] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[   53.032900] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   53.033116] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   53.033304] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   53.033486] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[   53.033660] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   53.033835] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   53.034012] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   53.034172] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[   53.034328] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   53.034482] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   53.034642] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   53.034785] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[   53.034959] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   53.035117] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   53.035267] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   53.035423] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[   53.036358] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[   53.036588] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE      ", BDB version 260
<7>[   53.036775] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[   53.036967] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[   53.037124] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[   53.037266] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[   53.037402] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[   53.037530] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[   53.037647] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[   53.037780] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[   53.037932] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[   53.038060] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[   53.038176] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[   53.038278] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[   53.038381] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[   53.038483] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[   53.038590] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[   53.038693] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[   53.038793] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[   53.038909] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   53.039007] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   53.039101] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   53.039192] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[   53.039277] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[   53.039362] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   53.039446] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   53.039528] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   53.039615] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[   53.039753] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   53.039933] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[   53.040093] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   53.040241] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[   53.040422] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[   53.040580] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[   53.040683] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   53.040786] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   53.040931] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[   53.041035] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[   53.041062] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[   53.041182] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[   53.041287] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[   53.041390] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[   53.041808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[   53.041993] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[   53.042544] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[   53.042651] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[   53.042737] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[   53.042820] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[   53.042900] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[   53.042989] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[   53.043068] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[   53.043143] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[   53.045259] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[   53.045371] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x8f074 = 0x86fc0
<7>[   53.045467] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[   53.045557] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[   53.045641] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[   53.045723] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[   53.045809] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[   53.045953] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f074 = 0x97fc0
<7>[   53.046107] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   53.046258] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[   53.046406] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   53.046550] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[   53.046693] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   53.046845] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[   53.046995] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[   53.047142] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f474 = 0x9ffc0
<7>[   53.047281] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   53.047424] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[   53.047449] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[   53.047578] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   53.047729] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[   53.047896] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   53.048042] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[   53.048195] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[   53.048353] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f874 = 0x547c0
<7>[   53.048504] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   53.048634] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[   53.048763] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   53.048911] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[   53.049039] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   53.049165] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[   53.050689] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   53.050876] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[   53.051013] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[   53.051769] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[   53.052011] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[   53.052301] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[   53.052516] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[   53.052703] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[   53.052892] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[   53.053086] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[   53.053269] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[   53.053429] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[   53.053585] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[   53.053740] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[   53.054177] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[   53.054466] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   53.054621] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   53.054774] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   53.054940] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   53.055092] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   53.055396] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   53.055743] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   53.056910] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   53.057283] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[   53.060333] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<6>[   53.060425] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[   53.061049] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID  HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[   53.061959] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[   53.063577] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[   53.064149] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[   53.066458] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   53.075852] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   53.075864] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.075866] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.075868] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   53.075871] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.075872] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   53.075877] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.075878] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   53.075881] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.075918] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.075919] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.075920] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.075928] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   53.076476] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[   53.077026] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[   53.077148] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[   53.077291] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[   53.077421] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[   53.077578] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   53.077678] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   53.077773] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   53.077880] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   53.077981] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   53.078111] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   53.078288] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[   53.078447] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   53.078568] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[   53.078896] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[   53.079055] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   53.079184] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[   53.079385] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[   53.079496] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   53.079603] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[   53.080022] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[   53.080167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[   53.080280] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[   53.080360] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[   53.080438] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[   53.080515] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[   53.080591] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[   53.080668] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[   53.080743] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[   53.080832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[   53.080928] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[   53.081025] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[   53.081121] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[   53.081202] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[   53.081273] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[   53.081343] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[   53.081413] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[   53.081479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[   53.081545] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[   53.081610] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[   53.081676] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[   53.082441] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[   53.082543] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[   53.082622] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[   53.082700] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[   53.082771] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[   53.082846] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[   53.082922] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[   53.082998] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[   53.083076] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[   53.083147] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[   53.083213] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[   53.083276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[   53.083341] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[   53.083410] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[   53.083473] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[   53.083535] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[   53.083595] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[   53.083679] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[   53.083751] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[   53.083826] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[   53.083902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[   53.084050] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[   53.084123] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[   53.084189] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[   53.084255] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[   53.084321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[   53.084387] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[   53.084451] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[   53.084546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[   53.084607] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[   53.084666] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[   53.084723] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[   53.084780] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[   53.084850] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[   53.084921] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[   53.085017] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[   53.085091] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[   53.085160] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[   53.085222] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[   53.085284] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[   53.085344] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[   53.085403] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[   53.085517] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[   53.085606] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[   53.085786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[   53.085901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   53.086004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[   53.086093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   53.086181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   53.086265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   53.086347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   53.086428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[   53.086509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   53.086581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   53.086651] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   53.086719] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[   53.086787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   53.086866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[   53.086942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   53.087016] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[   53.087089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[   53.087163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   53.087229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   53.087296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   53.087362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   53.087429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   53.087499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   53.087569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   53.087639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   53.087706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   53.087773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   53.087846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   53.087916] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[   53.087984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[   53.088051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   53.088118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   53.088184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.088249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.088314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.088379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   53.088443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   53.088506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.088572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.088639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.088703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   53.088767] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[   53.088842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[   53.089062] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[   53.089145] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   53.089219] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   53.089465] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[   53.089555] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[   53.128122] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[   53.199939] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[   53.337716] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[   53.337719] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[   53.337720] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[   53.337804] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[   53.337921] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   53.338011] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   53.338102] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   53.338208] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[   53.338301] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[   53.338386] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[   53.338444] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   53.338503] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   53.338560] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   53.339264] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[   53.339325] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[   53.339390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[   53.339452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[   53.339511] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[   53.339573] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[   53.339635] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[   53.339699] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[   53.339762] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[   53.339827] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[   53.339888] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[   53.339947] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[   53.340013] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[   53.340080] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[   53.340146] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[   53.340212] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[   53.340276] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[   53.340334] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[   53.340389] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[   53.340444] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[   53.340500] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[   53.340556] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[   53.340610] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[   53.340663] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[   53.340714] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[   53.340766] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[   53.340833] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[   53.340893] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[   53.340963] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[   53.341031] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[   53.341097] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[   53.341164] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[   53.341229] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[   53.341286] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[   53.341344] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[   53.341401] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[   53.341462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[   53.341521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[   53.341725] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[   53.341777] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[   53.341838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[   53.342162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[   53.342222] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[   53.342278] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[   53.342449] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[   53.342500] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[   53.342553] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[   53.342606] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[   53.342657] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[   53.342705] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[   53.343116] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[   53.343195] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[   53.343260] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[   53.343318] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   53.343375] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[   53.343432] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   53.343488] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   53.343543] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   53.343597] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   53.343649] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   53.343699] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   53.343748] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   53.343796] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   53.343858] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   53.343936] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[   53.344102] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[   53.346449] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[   53.359939] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[   53.360692] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   53.360761] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   53.369142] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 8ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   53.369487] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   53.370311] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[   53.370406] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[   53.370493] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[   53.370574] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[   53.370657] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[   53.370733] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[   53.370809] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[   53.370905] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[   53.370979] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[   53.374098] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[   53.374214] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[   53.374306] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[   53.376484] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[   53.380751] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[   53.380754] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[   53.380755] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[   53.380756] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[   53.380757] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[   53.380757] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[   53.380758] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[   53.380759] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[   53.380760] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[   53.380761] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[   53.380784] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[   53.380943] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[   53.381077] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[   53.381645] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[   53.381732] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[   53.381822] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[   53.381923] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[   53.382022] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[   53.382119] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[   53.382194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[   53.382267] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[   53.382337] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[   53.382405] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[   53.382471] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[   53.382537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[   53.382600] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[   53.382662] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[   53.382723] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[   53.382784] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[   53.382854] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[   53.382932] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[   53.383010] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[   53.383089] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[   53.383168] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[   53.383235] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[   53.383299] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[   53.383362] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[   53.383420] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[   53.383475] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[   53.383541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[   53.384243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[   53.384323] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[   53.384658] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[   53.384723] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[   53.385186] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[   53.385257] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   53.385318] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[   53.385376] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   53.385433] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[   53.385489] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   53.385543] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   53.385597] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   53.385649] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   53.385702] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   53.385755] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   53.385806] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   53.386055] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   53.386122] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[   53.386193] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[   53.386282] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[   53.403746] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[   53.404836] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   53.405003] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   53.425155] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   53.425609] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   53.427395] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   53.430317] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   53.432736] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   53.477413] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[   53.479651] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[   53.480019] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[   53.480343] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 - 2048) -> (   0 -    0), size 2048 ->    0
<7>[   53.480634] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb (   0 -    0) -> (4054 - 4096), size    0 ->   42
<7>[   53.480892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   53.481187] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   53.481472] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   53.481779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   53.482083] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   53.483516] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[   53.484116] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[   53.484350] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[   53.501447] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[   53.511301] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[   53.516590] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[   53.517567] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[   53.521163] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[   53.521298] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[   53.521962] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[   53.523053] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[   53.523114] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[   53.523606] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[   53.524287] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[   53.524335] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[   53.524778] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[   53.525373] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[   53.525402] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[   53.525443] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[   53.533152] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
<6>[   53.535567] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[   53.536558] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[   53.536674] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[   53.537843] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   53.538001] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.538153] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   53.538253] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   53.538362] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.538455] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   53.538537] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   53.538642] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   53.538731] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   53.538811] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[   53.538876] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[   53.538996] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[   53.539101] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[   53.539200] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[   53.539375] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   53.539601] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   53.539616] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   53.540446] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   53.540966] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   53.541099] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   53.541212] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   53.541361] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   53.541365] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.541367] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.541368] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   53.541370] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.541371] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   53.541374] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.541376] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   53.541377] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.541397] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   53.541497] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   53.542155] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   53.542275] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   53.543284] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<7>[   53.543537] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<5>[   53.543826] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.543829] [drm] DisplayID checksum invalid, remainder is 248
<5>[   53.543831] [drm] DisplayID checksum invalid, remainder is 248
<7>[   53.543865] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   53.543878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   53.543888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   53.543897] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   53.544060] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   53.544071] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   53.544079] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   53.544204] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   53.544212] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   53.544218] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   53.544333] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   53.544341] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   53.544344] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   53.544346] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   53.544348] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   53.544410] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   53.544420] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[   53.544422] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[   53.544425] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[   53.544427] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[   53.544436] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   53.544463] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[   53.544500] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[   53.551533] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d94000
<6>[   53.552403] fbcon: xedrmfb (fb0) is primary device
<7>[   53.553329] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[   53.553459] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[   53.553562] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[   53.553666] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[   53.553762] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[   53.553877] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[   53.554000] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[   53.554114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[   53.554223] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, 
<7>[   53.554316] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[   53.554403] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[   53.554486] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   53.554568] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   53.554648] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[   53.554727] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   53.554806] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   53.554927] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   53.555027] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[   53.555124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[   53.555203] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, 
<7>[   53.555278] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[   53.555353] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   53.555426] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   53.555499] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[   53.555572] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   53.555644] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   53.555716] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   53.555787] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[   53.555870] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[   53.555971] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[   53.556073] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[   53.556205] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 -    0) -> (   0 - 4054), size    0 -> 4054
<7>[   53.556292] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[   53.556369] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   3,    1 ->    2,  12,  12,  12,  11,  12,   0,   0,   0,   3,    0
<7>[   53.556443] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]  blocks   25,  25,  25,  25,  25,  25,   0,   0,   7,  73,    7 ->   49, 289, 289, 289, 265, 289,   0,   0,  63,  73,   87
<7>[   53.556515] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   55, 319, 319, 319, 293, 319,   0,   0,  64,  82,   88
<7>[   53.556586] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   53.556655] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.556723] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.556791] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.556870] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   53.556955] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557041] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557131] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557208] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   53.557278] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557345] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557407] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557470] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   53.557531] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557597] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557662] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557726] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   53.557789] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557867] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.557948] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   53.558030] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[   53.558153] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   53.558258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   53.558360] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   53.558450] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   53.558533] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   53.558633] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[   53.558735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[   53.558823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   53.558924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[   53.559030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   53.559132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   53.559229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   53.559309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   53.559387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[   53.559458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   53.559528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   53.559597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   53.559665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[   53.559733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   53.559800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[   53.559892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[   53.559990] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     pixelformat: RGB
<7>[   53.560077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     colorimetry: sRGB
<7>[   53.560150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     bpc: 0
<7>[   53.560215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     dynamic range: VESA range
<7>[   53.560280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     content type: Not defined
<7>[   53.560344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   53.560407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[   53.560469] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[   53.560532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[   53.560594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   53.560658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   53.560728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   53.560800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   53.560896] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   53.560992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   53.561082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   53.561164] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   53.561237] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   53.561305] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   53.561369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[   53.561432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[   53.561496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   53.561560] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   53.561624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.561691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.561770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.561859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   53.561948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   53.562033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.562115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.562185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   53.562249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   53.562312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[   53.562376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[   53.562438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[   53.562507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[   53.562577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[   53.562652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[   53.562733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[   53.562802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[   53.568107] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] 
<6>[   53.581261] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[   53.581484] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[   53.604332] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[   53.776051] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[   53.777169] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[   53.787757] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[   53.787822] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   53.788162] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   53.788170] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[   53.788488] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[   53.840867] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   53.841116] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   53.871077] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   53.871492] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[   53.871480] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.872681] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[   53.872670] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.872969] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[   53.873254] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[   53.873474] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[   53.873687] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[   53.873924] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[   53.874081] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   53.874165] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[   53.874320] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   53.874375] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[   53.874550] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[   53.874583] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[   53.874774] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[   53.874789] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.874984] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[   53.875199] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[   53.875382] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[   53.875562] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[   53.875771] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   53.876889] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[   53.877144] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (495 ms remaining)
<7>[   54.006634] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[   54.375940] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[   54.416833] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   54.417033] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[   54.417208] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[   54.453759] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   54.454064] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   54.454343] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[   54.454672] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   54.568634] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.568634] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.568634] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.732063] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   54.734985] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   54.735400] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[   54.738890] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   54.740214] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[   54.741565] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[   54.742878] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[   54.744162] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[   54.745618] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[   54.746050] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[   54.747858] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[   54.748190] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[   54.748915] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[   54.749423] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] 
<7>[   54.749758] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[   54.750182] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[   54.752427] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[   54.752452] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[   54.752880] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[   54.766366] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[   54.768779] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[   54.769209] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[   54.770602] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[   54.773082] Console: switching to colour frame buffer device 180x56
<6>[   54.787653] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[   54.808989] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[   54.809324] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[   54.809573] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[   54.809806] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[   54.810140] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[   54.810367] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[   54.810580] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[   54.810786] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[   54.811047] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[   54.811247] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[   54.811443] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[   54.811659] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[   54.811850] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[   54.812042] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[   54.812220] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[   54.812405] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[   54.812580] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[   54.812773] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[   54.812993] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[   54.813189] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[   54.813377] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[   54.813556] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[   54.813889] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] 
<7>[   54.813925] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   54.814575] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   54.814611] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   54.815242] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[   54.815546] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[   54.815876] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[   54.816229] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[   54.816571] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[   54.816896] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   54.817334] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   54.818096] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   54.818389] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   54.818665] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   54.819278] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<7>[   54.818981] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<5>[   54.819297] [drm] DisplayID checksum invalid, remainder is 248
<5>[   54.819302] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.819305] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   54.819311] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.819315] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   54.819326] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.819328] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   54.819333] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.819380] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   54.819627] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   54.819644] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   54.820142] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   54.821253] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[   54.821339] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   54.821579] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[   54.823567] [drm] DisplayID checksum invalid, remainder is 248
<5>[   54.823573] [drm] DisplayID checksum invalid, remainder is 248
<5>[   54.823576] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.823661] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   54.823695] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   54.823720] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   54.823741] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   54.824186] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   54.824407] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   54.824433] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   54.824453] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   54.824702] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   54.824930] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   54.824953] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   54.824973] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   54.825279] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   54.825485] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   54.825506] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   54.825517] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   54.825523] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   54.825529] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   54.825813] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   54.826928] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[   54.826938] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[   54.826944] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[   54.826950] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[   54.827009] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   54.829385] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   54.829643] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[   54.833966] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[   54.894398] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[   54.897780] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[   54.898015] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[   54.899873] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[   54.917045] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[   54.917221] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[   54.917349] [IGT] xe_module_load: exiting, ret=0
<7>[   54.929066] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   54.929202] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   54.929307] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   54.939810] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   54.939985] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   54.940079] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   54.940166] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   54.940239] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   54.940311] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   54.940381] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   54.940451] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   54.940517] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   54.940578] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   54.940638] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   54.940699] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   54.940760] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   54.940827] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   54.940903] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   54.940981] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   54.941059] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   54.941136] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   54.941212] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   54.941277] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   54.941340] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   54.941403] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   54.941466] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   54.941529] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   54.941591] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   54.941653] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   54.941715] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   54.941777] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   54.941852] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   54.941927] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   54.942002] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   54.942075] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   54.942149] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   54.942213] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   54.942275] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   54.942337] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   54.946354] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[   54.946762] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<6>[   54.953329] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[   54.955902] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[   54.956934] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[   54.959608] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[   55.848849] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   55.848877] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   55.848833] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   56.156741] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   57.385477] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[   57.385847] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067