<5>[ 0.000000] Linux version 6.14.0-rc4-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Feb 28 19:51:16 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f86018 ESRT=0x68f97a98 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem277: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem279: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000367] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000368] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004659] esrt: Reserving ESRT space from 0x0000000068f97a98 to 0x0000000068f97be8.
<7>[ 0.004667] e820: update [mem 0x68f97000-0x68f97fff] usable ==> reserved
<6>[ 0.004685] Using GB pages for direct mapping
<6>[ 0.005339] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005340] printk: early log buf free: 258912(98%)
<6>[ 0.005341] Secure boot disabled
<6>[ 0.005342] ACPI: Early table checksum verification disabled
<6>[ 0.005345] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005348] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005352] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005355] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005356] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.005358] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005359] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005361] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005362] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005363] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005364] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005366] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005367] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005368] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005369] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005371] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005372] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005373] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005375] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005376] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005377] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005378] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005380] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005381] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005382] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005384] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005385] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005386] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005389] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005390] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005391] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005392] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005394] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005395] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005396] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005397] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005399] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005401] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005402] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005404] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005405] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005406] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005408] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005409] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.005410] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005411] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005413] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.005414] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005415] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005416] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.005417] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.005418] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.005418] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005418] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005419] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005419] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005419] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005419] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005420] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005420] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005420] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005421] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005421] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005421] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005421] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.005422] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005422] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.005422] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.005422] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.005423] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.005423] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.005423] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.005424] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005424] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005424] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005424] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005425] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005425] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005425] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005426] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005426] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005426] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005426] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005427] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005427] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005428] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005428] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005428] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005428] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005429] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005430] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005430] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005431] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005492] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005695] No NUMA configuration found
<6>[ 0.005695] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005700] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005810] Zone ranges:
<6>[ 0.005810] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005811] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005812] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005813] Device empty
<6>[ 0.005813] Movable zone start for each node
<6>[ 0.005814] Early memory node ranges
<6>[ 0.005814] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005815] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005815] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005816] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 0.005817] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005821] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005838] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007855] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036429] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 0.036492] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036957] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036963] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037014] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037016] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037017] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037020] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037020] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037031] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 0.037037] TSC deadline timer available
<6>[ 0.037039] CPU topo: Max. logical packages: 1
<6>[ 0.037039] CPU topo: Max. logical dies: 1
<6>[ 0.037039] CPU topo: Max. dies per package: 1
<6>[ 0.037041] CPU topo: Max. threads per core: 1
<6>[ 0.037041] CPU topo: Num. cores per package: 8
<6>[ 0.037042] CPU topo: Num. threads per package: 8
<6>[ 0.037042] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037054] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037055] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037056] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 0.037057] PM: hibernation: Registered nosave memory: [mem 0x68f97000-0x68f97fff]
<6>[ 0.037058] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037058] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037058] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037059] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037059] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037059] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037060] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037060] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 0.037062] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037063] Booting paravirtualized kernel on bare hardware
<6>[ 0.037064] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037073] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037402] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037406] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037408] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037421] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,snd_hda_intel,ast ro
<5>[ 0.037499] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037512] random: crng init done
<6>[ 0.039370] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040272] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040328] Fallback order for Node 0: 0
<6>[ 0.040331] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 0.040332] Policy zone: Normal
<6>[ 0.040341] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.040342] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040344] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041282] software IO TLB: area num 8.
<4>[ 0.086508] **********************************************************
<4>[ 0.086509] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086509] ** **
<4>[ 0.086509] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086510] ** via the console, logs, and other interfaces. This **
<4>[ 0.086510] ** might reduce the security of your system. **
<4>[ 0.086510] ** **
<4>[ 0.086510] ** If you see this message and you are not debugging **
<4>[ 0.086511] ** the kernel, report this immediately to your system **
<4>[ 0.086511] ** administrator! **
<4>[ 0.086511] ** **
<4>[ 0.086511] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086511] **********************************************************
<6>[ 0.087609] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.087935] ftrace: allocating 59524 entries in 233 pages
<6>[ 0.113394] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114583] Dynamic Preempt: voluntary
<6>[ 0.115032] Running RCU self tests
<6>[ 0.115033] Running RCU synchronous self tests
<6>[ 0.115033] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115034] rcu: RCU lockdep checking is enabled.
<6>[ 0.115034] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115035] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115035] Rude variant of Tasks RCU enabled.
<6>[ 0.115035] Tracing variant of Tasks RCU enabled.
<6>[ 0.115035] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115036] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115076] Running RCU synchronous self tests
<6>[ 0.115081] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115084] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115087] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125169] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.125624] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.125965] Console: colour dummy device 80x25
<6>[ 0.125973] printk: legacy console [tty0] enabled
<6>[ 0.127144] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127152] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127155] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127159] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127162] ... CLASSHASH_SIZE: 4096
<6>[ 0.127166] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127169] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127173] ... CHAINHASH_SIZE: 262144
<6>[ 0.127177] memory used by lock dependency info: 54145 kB
<6>[ 0.127181] memory used for stack traces: 4224 kB
<6>[ 0.127185] per task-struct memory footprint: 1920 bytes
<6>[ 0.127235] ACPI: Core revision 20240827
<6>[ 0.128106] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128170] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128175] DMAR: Host address width 38
<6>[ 0.128179] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128209] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128245] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128266] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128292] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128313] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128347] DMAR: SATC flags: 0x1
<6>[ 0.128357] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128362] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128366] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130425] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135591] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135610] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.135684] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.135690] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.135869] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.135874] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.135884] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.135892] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.135896] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.135903] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.135910] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.135925] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.135932] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.135937] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.135942] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.135949] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.135955] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.135961] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.135967] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.135972] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136604] Freeing SMP alternatives memory: 48K
<6>[ 0.136604] pid_max: default: 32768 minimum: 301
<6>[ 0.136604] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136604] landlock: Up and running.
<6>[ 0.136604] Yama: becoming mindful.
<6>[ 0.136604] AppArmor: AppArmor initialized
<6>[ 0.136604] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136604] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136604] Running RCU synchronous self tests
<6>[ 0.136604] Running RCU synchronous self tests
<6>[ 0.136604] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136604] Running RCU Tasks wait API self tests
<6>[ 0.136604] Running RCU Tasks Rude wait API self tests
<6>[ 0.136604] Running RCU Tasks Trace wait API self tests
<6>[ 0.136604] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136604] core: cpu_core PMU driver:
<6>[ 0.136604] ... version: 6
<6>[ 0.136604] ... bit width: 48
<6>[ 0.136604] ... generic registers: 10
<6>[ 0.136604] ... value mask: 0000ffffffffffff
<6>[ 0.136608] ... max period: 00007fffffffffff
<6>[ 0.136613] ... fixed-purpose events: 4
<6>[ 0.136616] ... event mask: 0001000f000003ff
<6>[ 0.136646] signal: max sigframe size: 3632
<6>[ 0.136667] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.136750] rcu: Hierarchical SRCU implementation.
<6>[ 0.136754] rcu: Max phase no-delay instances is 400.
<6>[ 0.137672] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139501] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.139770] smp: Bringing up secondary CPUs ...
<6>[ 0.140114] smpboot: x86: Booting SMP configuration:
<6>[ 0.140120] .... node #0, CPUs: #1 #2
<6>[ 0.144353] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.148584] #3 #4 #5 #6 #7
<6>[ 0.010794] core: cpu_atom PMU driver:
<6>[ 0.010794] ... version: 6
<6>[ 0.010794] ... bit width: 48
<6>[ 0.010794] ... generic registers: 8
<6>[ 0.010794] ... value mask: 0000ffffffffffff
<6>[ 0.010794] ... max period: 00007fffffffffff
<6>[ 0.010794] ... fixed-purpose events: 6
<6>[ 0.010794] ... event mask: 00000077000000ff
<6>[ 0.159745] smp: Brought up 1 node, 8 CPUs
<6>[ 0.160095] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.161767] Memory: 32344964K/33143168K available (24514K kernel code, 5579K rwdata, 9272K rodata, 5632K init, 68400K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.163053] devtmpfs: initialized
<6>[ 0.165072] x86/mm: Memory block size: 128MB
<6>[ 0.184178] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.185014] Running RCU synchronous self tests
<6>[ 0.185029] Running RCU synchronous self tests
<6>[ 0.185049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.185049] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.185049] pinctrl core: initialized pinctrl subsystem
<6>[ 0.185933] PM: RTC time: 03:14:35, date: 2025-03-01
<6>[ 0.186809] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.187840] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.188140] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.188436] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.188498] audit: initializing netlink subsys (disabled)
<5>[ 0.188632] audit: type=2000 audit(1740798875.053:1): state=initialized audit_enabled=0 res=1
<6>[ 0.189292] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.189294] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.189300] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.189305] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.189310] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.189354] EISA bus registered
<6>[ 0.189382] cpuidle: using governor ladder
<6>[ 0.189382] cpuidle: using governor menu
<6>[ 0.189692] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.190080] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.190109] PCI: Using configuration type 1 for base access
<6>[ 0.190252] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.191740] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.191740] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.191740] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.191740] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.210605] raid6: avx2x4 gen() 76229 MB/s
<6>[ 0.227605] raid6: avx2x2 gen() 83011 MB/s
<6>[ 0.244605] raid6: avx2x1 gen() 74693 MB/s
<6>[ 0.244610] raid6: using algorithm avx2x2 gen() 83011 MB/s
<6>[ 0.261605] raid6: .... xor() 57585 MB/s, rmw enabled
<6>[ 0.261610] raid6: using avx2x2 recovery algorithm
<6>[ 0.262078] fbcon: Taking over console
<6>[ 0.262184] ACPI: Added _OSI(Module Device)
<6>[ 0.262187] ACPI: Added _OSI(Processor Device)
<6>[ 0.262191] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.262195] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.883317] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.909940] ACPI: EC: EC started
<6>[ 0.909970] ACPI: EC: interrupt blocked
<6>[ 0.917180] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.917194] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 1.016649] Callback from call_rcu_tasks() invoked.
<6>[ 1.208014] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.208026] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.235336] ACPI: Interpreter enabled
<6>[ 1.235428] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.235432] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.241157] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.241165] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.260204] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.260254] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.325411] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.325692] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.328410] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.831030] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.867924] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 2.076877] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 2.082275] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 2.106881] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 2.137983] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.138713] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.139416] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 2.259202] ACPI: \: Can't tag data node
<3>[ 2.260367] ACPI: \: Can't tag data node
<3>[ 2.261867] ACPI: \: Can't tag data node
<3>[ 2.262916] ACPI: \: Can't tag data node
<3>[ 2.264051] ACPI: \: Can't tag data node
<6>[ 2.405744] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.406249] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.406724] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.407206] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.407679] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.409006] ACPI: \PIN_: New power resource
<6>[ 2.412472] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.412487] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.416100] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.425541] PCI host bridge to bus 0000:00
<6>[ 2.425571] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.425579] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.425585] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.425592] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.425599] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.425607] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.428505] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.429099] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.429190] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.429199] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.429208] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.429251] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.430703] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.430732] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 2.431884] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.431914] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.431921] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 2.432722] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.432767] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.432779] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.432797] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.432919] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.432979] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.437260] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.437306] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.437318] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.437337] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.437452] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.437508] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.442018] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.442069] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.442081] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.442099] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.442220] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.442268] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.446230] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.446267] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 2.446281] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.446476] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.446505] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.446512] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 2.447185] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.447238] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 2.447309] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.448803] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.448855] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 2.448863] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 2.448921] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.448924] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.450463] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.450515] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 2.450524] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 2.450584] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.450589] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.451821] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.451879] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 2.451946] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.454698] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.454792] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 2.454889] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.455269] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.455321] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 2.455389] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.457171] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.457235] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 2.457244] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 2.457535] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.457684] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.459226] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.459321] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.460691] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.460803] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.462431] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.462542] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.463830] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.463922] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 2.464015] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.466548] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.466623] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 2.466630] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 2.466873] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.466906] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.466914] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.466922] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.467044] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.467101] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.474851] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.474994] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.475050] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.475545] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.475751] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.490283] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.494401] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.494634] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 2.494671] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 2.494906] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.496008] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.496183] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 2.496212] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.499791] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.500227] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.500715] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.500824] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.500963] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.504579] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 2.504693] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 2.504715] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 2.504734] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 2.505488] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.505939] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.506312] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.506941] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.507061] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.507083] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.507103] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.507378] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.507389] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.508629] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.510744] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.511457] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.511561] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.512832] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.512958] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 3.008614] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 14.911743] Low-power S0 idle used by default for system suspend
<6>[ 14.963912] ACPI: EC: interrupt unblocked
<6>[ 14.963923] ACPI: EC: event unblocked
<6>[ 14.963958] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 14.963965] ACPI: EC: GPE=0x6e
<6>[ 14.963971] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 14.963980] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 14.964911] iommu: Default domain type: Translated
<6>[ 14.964911] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 14.966893] SCSI subsystem initialized
<7>[ 14.966948] libata version 3.00 loaded.
<6>[ 14.966948] ACPI: bus type USB registered
<6>[ 14.966948] usbcore: registered new interface driver usbfs
<6>[ 14.967619] usbcore: registered new interface driver hub
<6>[ 14.967660] usbcore: registered new device driver usb
<6>[ 14.967782] pps_core: LinuxPPS API ver. 1 registered
<6>[ 14.967787] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 14.967805] PTP clock support registered
<6>[ 14.968773] EDAC MC: Ver: 3.0.0
<6>[ 14.971790] efivars: Registered efivars operations
<6>[ 14.977782] NetLabel: Initializing
<6>[ 14.977789] NetLabel: domain hash size = 128
<6>[ 14.977793] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 14.977862] NetLabel: unlabeled traffic allowed by default
<6>[ 14.977876] mctp: management component transport protocol core
<6>[ 14.977881] NET: Registered PF_MCTP protocol family
<6>[ 14.977917] PCI: Using ACPI for IRQ routing
<7>[ 14.998198] PCI: pci_cache_line_size set to 64 bytes
<6>[ 14.998476] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 14.998607] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 14.998616] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 14.998619] e820: reserve RAM buffer [mem 0x68f97000-0x6bffffff]
<7>[ 14.998622] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 14.998624] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 14.999043] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 14.999043] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 14.999043] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 14.999615] vgaarb: loaded
<6>[ 15.000967] clocksource: Switched to clocksource tsc-early
<5>[ 15.012580] VFS: Disk quotas dquot_6.6.0
<6>[ 15.012645] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 15.014973] AppArmor: AppArmor Filesystem Enabled
<6>[ 15.015355] pnp: PnP ACPI init
<6>[ 15.017424] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 15.017452] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 15.021061] system 00:02: [io 0x06a4] has been reserved
<6>[ 15.021086] system 00:02: [io 0x06a0] has been reserved
<6>[ 15.084846] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 15.084887] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 15.084926] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 15.084960] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 15.084987] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 15.085020] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 15.085046] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 15.085069] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 15.093213] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 15.100144] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 15.100591] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 15.112158] pnp: PnP ACPI: found 8 devices
<6>[ 15.126318] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 15.127141] NET: Registered PF_INET protocol family
<6>[ 15.127421] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 15.130553] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 15.130877] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 15.131208] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 15.132447] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 15.134543] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 15.135243] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 15.136681] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 15.138315] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 15.138421] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 15.138441] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 15.138456] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 15.138521] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 15.138532] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 15.138542] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 15.138553] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 15.138608] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 15.138663] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 15.138717] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 15.138772] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 15.138822] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 15.138837] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 15.138849] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 15.138861] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 15.138884] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 15.138893] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 15.138904] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 15.138916] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 15.138931] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 15.138940] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 15.138952] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 15.138963] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 15.138986] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 15.138994] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 15.139005] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 15.139020] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 15.139058] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 15.139105] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 15.139114] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 15.139122] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 15.139131] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 15.139140] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 15.139150] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 15.139157] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 15.139165] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 15.139176] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 15.139183] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 15.139191] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 15.139202] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 15.139209] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 15.139217] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 15.139227] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 15.139235] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 15.139243] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 15.140692] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 15.142951] PCI: CLS 0 bytes, default 64
<6>[ 15.143074] DMAR: No RMRR found
<6>[ 15.143087] DMAR: No ATSR found
<6>[ 15.143093] DMAR: dmar1: Using Queued invalidation
<6>[ 15.143116] DMAR: dmar0: Using Queued invalidation
<6>[ 15.143127] DMAR: dmar2: Using Queued invalidation
<6>[ 15.144188] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 15.144289] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 15.144380] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 15.144455] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 15.148586] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 15.150088] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 15.150185] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 15.150268] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 15.150355] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 15.150465] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 15.150521] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 15.150577] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 15.150663] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 15.150750] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 15.150871] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 15.150930] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 15.151055] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 15.151111] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 15.151171] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 15.151229] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 15.151327] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 15.151387] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 15.151459] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 15.151562] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 15.151707] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 15.151764] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 15.151829] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 15.151890] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 15.151950] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 15.152008] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 15.152087] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 15.152190] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 15.165807] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 15.165825] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 15.165834] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 15.171310] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 15.171378] clocksource: Switched to clocksource tsc
<6>[ 15.171542] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 15.176857] Initialise system trusted keyrings
<5>[ 15.176947] Key type blacklist registered
<6>[ 15.177175] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 15.187002] zbud: loaded
<6>[ 15.188451] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 15.188584] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 15.188591] ntfs3: Read-only LZX/Xpress compression included
<5>[ 15.189126] integrity: Platform Keyring initialized
<5>[ 15.189153] integrity: Machine keyring initialized
<6>[ 15.195469] xor: automatically using best checksumming function avx
<5>[ 15.195482] Key type asymmetric registered
<5>[ 15.195496] Asymmetric key parser 'x509' registered
<6>[ 15.195631] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 15.195982] io scheduler mq-deadline registered
<6>[ 15.197077] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 15.198692] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 15.199031] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 15.200261] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 15.200554] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 15.201753] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 15.202088] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 15.203191] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 15.203497] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 15.205073] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 15.205436] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 15.206086] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 15.209141] Monitor-Mwait will be used to enter C-1 state
<7>[ 15.209276] Monitor-Mwait will be used to enter C-2 state
<7>[ 15.209332] Monitor-Mwait will be used to enter C-3 state
<6>[ 15.215637] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 15.215837] ACPI: button: Lid Switch [LID0]
<6>[ 15.216075] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 15.216237] ACPI: button: Sleep Button [SLPB]
<6>[ 15.216436] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 15.216826] ACPI: button: Power Button [PWRB]
<4>[ 15.226727] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 15.234287] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 15.243069] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 15.255670] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 15.269393] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 15.277067] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 15.284833] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 15.292229] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 15.382362] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 15.382379] ACPI: thermal: Thermal Zone [TZ00] (56 C)
<6>[ 15.383456] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 15.383811] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 15.384725] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 15.406735] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 15.420224] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 15.422043] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 15.445609] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 15.448614] hpet_acpi_add: no address or irqs in _CRS
<6>[ 15.448807] Linux agpgart interface v0.103
<6>[ 15.449404] ACPI: bus type drm_connector registered
<6>[ 15.474632] loop: module loaded
<6>[ 15.526834] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 15.649964] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 15.802825] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 15.931930] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 16.051278] Key type psk registered
<6>[ 16.056888] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 16.057768] tun: Universal TUN/TAP device driver, 1.6
<6>[ 16.058032] nvme nvme0: pci function 0000:80:00.0
<6>[ 16.058571] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 16.058666] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 16.060543] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 16.063349] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 16.063380] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 16.063403] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 16.063783] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 16.063809] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 16.063820] usb usb1: Product: xHCI Host Controller
<6>[ 16.063828] usb usb1: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 16.063836] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 16.064891] hub 1-0:1.0: USB hub found
<6>[ 16.065012] hub 1-0:1.0: 1 port detected
<6>[ 16.069091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 16.069109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 16.069119] usb usb2: Product: xHCI Host Controller
<6>[ 16.069127] usb usb2: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 16.069136] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 16.069772] hub 2-0:1.0: USB hub found
<6>[ 16.069825] hub 2-0:1.0: 3 ports detected
<6>[ 16.092948] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 16.095161] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 16.095201] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 16.097006] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 16.099606] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 16.099638] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 16.099662] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 16.099936] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 16.099951] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 16.099961] usb usb3: Product: xHCI Host Controller
<6>[ 16.099969] usb usb3: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 16.099978] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 16.100700] hub 3-0:1.0: USB hub found
<6>[ 16.100762] hub 3-0:1.0: 8 ports detected
<6>[ 16.101208] nvme0n1: p1 p2
<6>[ 16.130965] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 16.130988] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 16.130999] usb usb4: Product: xHCI Host Controller
<6>[ 16.131007] usb usb4: Manufacturer: Linux 6.14.0-rc4-xe+ xhci-hcd
<6>[ 16.131015] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 16.131659] hub 4-0:1.0: USB hub found
<6>[ 16.131705] hub 4-0:1.0: 2 ports detected
<6>[ 16.139134] usbcore: registered new interface driver usb-storage
<6>[ 16.139301] usbcore: registered new interface driver usbserial_generic
<6>[ 16.139435] usbserial: USB Serial support registered for generic
<6>[ 16.139494] usbcore: registered new interface driver ftdi_sio
<6>[ 16.139529] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 16.139583] usbcore: registered new interface driver pl2303
<6>[ 16.139620] usbserial: USB Serial support registered for pl2303
<6>[ 16.139758] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 16.139769] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 16.848535] i8042: Can't read CTR while initializing i8042
<3>[ 16.848546] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 16.849049] mousedev: PS/2 mouse device common for all mice
<6>[ 16.850180] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 16.852079] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 16.852316] rtc_cmos rtc_cmos: setting system clock to 2025-03-01T03:14:52 UTC (1740798892)
<6>[ 16.852483] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 16.852540] i2c_dev: i2c /dev entries driver
<6>[ 16.856950] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 16.856967] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 16.856977] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 16.857021] device-mapper: uevent: version 1.0.3
<6>[ 16.857367] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 16.857504] platform eisa.0: Probing EISA bus 0
<4>[ 16.857518] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 16.857532] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 16.857545] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 16.857556] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 16.857568] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 16.857580] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 16.857591] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 16.857603] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 16.857615] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 16.857624] platform eisa.0: EISA: Detected 0 cards
<6>[ 16.857634] intel_pstate: Intel P-state driver initializing
<6>[ 16.861329] Hybrid CPU capacity scaling enabled
<6>[ 16.862856] intel_pstate: HWP enabled
<6>[ 16.862866] sdhci: Secure Digital Host Controller Interface driver
<6>[ 16.862875] sdhci: Copyright(c) Pierre Ossman
<6>[ 16.863021] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 16.865713] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 16.866780] drop_monitor: Initializing network drop monitor service
<6>[ 16.867315] NET: Registered PF_INET6 protocol family
<6>[ 16.870547] Segment Routing with IPv6
<6>[ 16.870591] In-situ OAM (IOAM) with IPv6
<6>[ 16.870638] NET: Registered PF_PACKET protocol family
<5>[ 16.870824] Key type dns_resolver registered
<4>[ 16.873952] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 16.874180] microcode: Current revision: 0x0000011b
<6>[ 16.874720] IPI shorthand broadcast: enabled
<6>[ 16.886038] sched_clock: Marking stable (16876001113, 9794472)->(17006304472, -120508887)
<6>[ 16.886717] registered taskstats version 1
<5>[ 16.887723] Loading compiled-in X.509 certificates
<6>[ 16.915150] Demotion targets for Node 0: null
<6>[ 16.915459] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 16.915463] kmemleak: Automatic memory scanning thread started
<5>[ 16.915649] Key type .fscrypt registered
<5>[ 16.915653] Key type fscrypt-provisioning registered
<6>[ 16.918212] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 16.920279] Key type encrypted registered
<6>[ 16.920287] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 16.920463] ima: No TPM chip found, activating TPM-bypass!
<5>[ 16.920477] Loading compiled-in module X.509 certificates
<5>[ 16.921269] Loaded X.509 cert 'Build time autogenerated kernel key: 9d5fe5c4f83f67e4345214237eea2dfd8deead0b'
<6>[ 16.921279] ima: Allocated hash algorithm: sha256
<6>[ 16.921323] ima: No architecture policies found
<6>[ 16.921414] evm: Initialising EVM extended attributes:
<6>[ 16.921418] evm: security.selinux
<6>[ 16.921421] evm: security.SMACK64
<6>[ 16.921424] evm: security.SMACK64EXEC
<6>[ 16.921427] evm: security.SMACK64TRANSMUTE
<6>[ 16.921430] evm: security.SMACK64MMAP
<6>[ 16.921433] evm: security.apparmor
<6>[ 16.921436] evm: security.ima
<6>[ 16.921438] evm: security.capability
<6>[ 16.921441] evm: HMAC attrs: 0x1
<6>[ 16.923327] PM: Magic number: 1:538:208
<6>[ 16.923339] bdi 259:0: hash matches
<6>[ 16.923391] vc vcsa: hash matches
<6>[ 16.923564] printk: legacy console [netcon0] enabled
<6>[ 16.923570] netconsole: network logging started
<6>[ 16.924086] RAS: Correctable Errors collector initialized.
<6>[ 16.924207] clk: Disabling unused clocks
<6>[ 16.924217] PM: genpd: Disabling unused power domains
<6>[ 16.924729] md: Waiting for all devices to be available before autodetect
<6>[ 16.924736] md: If you don't use raid, use raid=noautodetect
<6>[ 16.924742] md: Autodetecting RAID arrays.
<6>[ 16.924751] md: autorun ...
<6>[ 16.924755] md: ... autorun DONE.
<6>[ 16.972679] EXT4-fs (nvme0n1p2): mounted filesystem d94563f3-71a5-4472-983a-b9d25270145b ro with ordered data mode. Quota mode: none.
<6>[ 16.972752] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 16.973364] devtmpfs: mounted
<6>[ 16.984291] Freeing unused decrypted memory: 2028K
<6>[ 16.985211] Freeing unused kernel image (initmem) memory: 5632K
<6>[ 16.985233] Write protecting the kernel read-only data: 34816k
<6>[ 16.985557] Freeing unused kernel image (text/rodata gap) memory: 60K
<6>[ 16.985828] Freeing unused kernel image (rodata/data gap) memory: 968K
<6>[ 16.990495] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 16.991088] Run /sbin/init as init process
<7>[ 16.991092] with arguments:
<7>[ 16.991093] /sbin/init
<7>[ 16.991094] with environment:
<7>[ 16.991095] HOME=/
<7>[ 16.991096] TERM=linux
<7>[ 16.991097] BOOT_IMAGE=/boot/drm_intel
<7>[ 17.038016] systemd[1]: Inserted module 'autofs4'
<7>[ 17.056248] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 17.056290] systemd[1]: Detected architecture x86-64.
<7>[ 17.057606] systemd[1]: Hostname set to <shard-lnl-6>.
<7>[ 17.302493] systemd[1]: Queued start job for default target graphical.target.
<7>[ 17.344244] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 17.348447] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 17.351418] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 17.351865] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 17.352961] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 17.353143] systemd[1]: Expecting device dev-disk-by\x2duuid-BBCC\x2dD8CD.device - /dev/disk/by-uuid/BBCC-D8CD...
<7>[ 17.353279] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 17.353408] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 17.353518] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 17.353622] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 17.353730] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 17.354100] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 17.354610] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 17.354970] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 17.355358] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 17.355659] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 17.355891] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 17.356219] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 17.356546] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 17.356828] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 17.357021] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 17.357294] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 17.357537] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 17.360641] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 17.363376] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 17.366099] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 17.368885] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 17.374614] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 17.378383] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 17.381491] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 17.385011] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 17.387871] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 17.390505] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 17.393657] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 17.398017] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 17.403559] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 17.408519] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 17.412956] systemd-journald[209]: Collecting audit messages is disabled.
<7>[ 17.415537] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<6>[ 17.416067] pstore: Using crash dump compression: deflate
<7>[ 17.416246] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 17.418840] pstore: Registered efi_pstore as persistent store backend
<7>[ 17.422157] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 17.427077] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<6>[ 17.427118] fuse: init (API version 7.42)
<7>[ 17.427186] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 17.427253] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 17.430793] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 17.436149] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 17.575711] EXT4-fs (nvme0n1p2): re-mounted d94563f3-71a5-4472-983a-b9d25270145b r/w. Quota mode: none.
<6>[ 17.614770] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:306577408k SS
<7>[ 17.639298] systemd-journald[209]: Received client request to flush runtime journal.
<7>[ 17.653994] systemd-journald[209]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 17.654011] systemd-journald[209]: Rotating system journal.
<4>[ 18.341361] nvme nvme0: using unchecked data buffer
<6>[ 18.442794] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 18.460259] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460283] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460307] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460332] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460356] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460381] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460406] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460430] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460455] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460479] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460504] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460529] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460553] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460578] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460602] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460627] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460652] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460688] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460712] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460737] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460761] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460786] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460814] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460835] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460860] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460896] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460921] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.460992] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461015] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461040] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461064] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461089] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461137] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461161] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461186] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461210] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461235] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.461259] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.499078] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring
<4>[ 18.505488] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505512] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505537] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505561] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505586] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505611] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505647] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505671] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505895] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.505965] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506000] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506048] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506148] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506173] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506197] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506234] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506270] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506294] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506318] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506343] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506368] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506392] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506417] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506441] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506466] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506491] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506515] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506540] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506564] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.506589] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 18.525612] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<4>[ 18.539804] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.539826] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.539846] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.539866] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.539886] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.539906] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.539926] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540042] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540062] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540082] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540102] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540122] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540142] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540162] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540182] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540202] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540222] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540242] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540287] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540307] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540327] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540347] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540399] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540419] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540439] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540482] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540502] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540522] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540542] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540574] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540594] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540614] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540633] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540653] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540673] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540693] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540713] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540733] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.540753] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 18.542101] pci 0000:00:05.0: Setting to D3hot
<6>[ 18.545135] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 18.555343] pci 0000:00:0b.0: Setting to D3hot
<6>[ 18.562053] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 18.566687] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.566712] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.566920] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 18.567211] intel_pmc_core INT33A1:00: initialized
<3>[ 18.596262] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 18.662449] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<4>[ 18.662483] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662508] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662528] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662548] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662568] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662588] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662608] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662628] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662648] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662691] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662711] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662751] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662771] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662944] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662962] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.662982] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663002] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663045] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663068] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663088] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663107] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663130] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663149] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663169] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663189] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663222] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663266] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663286] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663305] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663337] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663357] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663377] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663397] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663416] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663437] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663456] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663476] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663496] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663516] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663536] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663556] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663576] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663596] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663616] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 18.663636] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 18.697728] audit: type=1400 audit(1740798894.343:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=430 comm="apparmor_parser"
<5>[ 18.701600] audit: type=1400 audit(1740798894.347:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=429 comm="apparmor_parser"
<5>[ 18.704137] audit: type=1400 audit(1740798894.350:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=435 comm="apparmor_parser"
<5>[ 18.706631] audit: type=1400 audit(1740798894.352:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=432 comm="apparmor_parser"
<5>[ 18.707273] audit: type=1400 audit(1740798894.353:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=431 comm="apparmor_parser"
<5>[ 18.710811] audit: type=1400 audit(1740798894.356:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=433 comm="apparmor_parser"
<5>[ 18.711671] audit: type=1400 audit(1740798894.357:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=434 comm="apparmor_parser"
<5>[ 18.712239] audit: type=1400 audit(1740798894.358:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=438 comm="apparmor_parser"
<5>[ 18.712731] audit: type=1400 audit(1740798894.358:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=436 comm="apparmor_parser"
<5>[ 18.716192] audit: type=1400 audit(1740798894.362:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=439 comm="apparmor_parser"
<6>[ 19.009776] ACPI: bus type thunderbolt registered
<6>[ 19.022407] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 19.022966] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 19.023176] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 19.038939] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 19.049791] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 19.049801] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 19.069133] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 19.102285] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 19.102292] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 19.109125] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 19.110974] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 19.114495] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 19.133107] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 19.133474] intel_rapl_common: Found RAPL domain package
<6>[ 19.133479] intel_rapl_common: Found RAPL domain dram
<6>[ 19.158386] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 19.212418] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:15:be, XID 541, IRQ 184
<6>[ 19.212427] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 19.246154] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 19.315910] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 19.315918] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 19.315920] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 19.315921] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 19.315922] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 19.315923] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 19.361732] cryptd: max_cpu_qlen set to 1000
<6>[ 19.485576] AES CTR mode by8 optimization enabled
<4>[ 19.545634] block nvme0n1: No UUID available providing old NGUID
<6>[ 19.668969] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 19.725892] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 19.738791] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:92
<6>[ 19.738807] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 19.740972] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 19.754486] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 19.754493] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 19.754495] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 19.792784] evm: overlay not supported
<6>[ 19.921712] intel_rapl_common: Found RAPL domain package
<6>[ 19.921718] intel_rapl_common: Found RAPL domain core
<6>[ 19.922046] intel_rapl_common: Found RAPL domain uncore
<6>[ 19.922049] intel_rapl_common: Found RAPL domain dram
<6>[ 19.922051] intel_rapl_common: Found RAPL domain psys
<6>[ 20.005416] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 20.084006] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 20.111119] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 20.140476] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 20.140491] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 20.182099] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 20.205513] loop0: detected capacity change from 0 to 8
<6>[ 20.346765] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 20.550939] Consider using thermal netlink events interface
<6>[ 20.749410] hid: raw HID events driver (C) Jiri Kosina
<6>[ 20.755373] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 20.789885] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.791058] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.792345] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.792956] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.794018] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.794597] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.801156] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.805411] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.809770] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.812672] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.816506] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.818916] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 21.726050] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 21.726074] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 22.643547] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 22.643592] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 25.488842] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 36.436208] systemd-journald[209]: /var/log/journal/969c3e4a3b0c44bb886902ddd4fce94a/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 78.246904] [IGT] xe_module_load: executing
<7>[ 78.252897] [IGT] xe_module_load: starting subtest load
<5>[ 78.434622] Setting dangerous option force_probe - tainting kernel
<6>[ 78.437365] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 78.438919] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 78.438931] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 78.439080] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 78.439180] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 78.443134] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 78.446896] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 78.446988] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 78.447070] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 78.447146] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 78.447220] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 78.447283] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 78.447337] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 78.447389] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 78.447439] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 78.447489] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 78.447539] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 78.447589] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 78.447638] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 78.447687] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 78.447736] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 78.447830] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 78.449312] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 78.454034] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 78.456840] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 78.457781] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 78.457910] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 78.458090] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 78.458198] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 78.458297] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 78.458393] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 78.458487] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 78.459209] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 78.463188] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 78.463280] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 78.463351] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 78.463416] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 78.463478] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 78.463538] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 78.463597] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 78.463654] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 78.463709] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 78.463764] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 78.463817] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 78.463869] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 78.463921] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 78.463975] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 78.465339] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 78.467354] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 78.468169] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 78.468272] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 78.468383] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 78.469675] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 78.469903] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 78.489112] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 78.489554] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 78.489726] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 78.489899] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 78.490073] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 78.490236] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 78.490390] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 78.490580] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 78.491270] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 78.491608] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 78.491910] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 78.492236] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 78.492472] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 78.492697] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 78.492902] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 78.493110] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 78.493338] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 78.493569] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 78.493811] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 78.494028] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 78.494294] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 78.494513] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 78.494729] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 78.494931] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 78.495135] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 78.495354] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 78.495543] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 78.495725] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 78.495893] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 78.496056] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 78.496242] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 78.496393] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 78.496535] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 78.496669] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 78.496801] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 78.496950] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 78.497111] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 78.497234] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 78.497354] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 78.497467] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 78.497578] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 78.497689] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 78.497797] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 78.497902] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 78.498007] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 78.498127] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 78.498257] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 78.498370] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 78.498483] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 78.498940] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 78.499059] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 78.499187] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 78.499295] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 78.499397] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 78.499495] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 78.499593] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 78.499686] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 78.499788] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 78.499886] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 78.499976] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 78.500064] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 78.500168] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 78.500258] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 78.500351] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 78.500438] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 78.500525] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 78.500607] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 78.500685] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 78.500766] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 78.500840] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 78.500919] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 78.501002] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 78.501090] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 78.501164] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 78.501237] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 78.501313] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 78.501396] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 78.501512] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 78.501665] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 78.501798] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 78.501934] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 78.502106] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 78.502246] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 78.502360] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 78.502466] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 78.502595] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 78.502683] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 78.502708] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 78.502815] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 78.502907] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 78.502999] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 78.503408] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 78.503592] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 78.504196] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 78.504319] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 78.504428] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 78.504511] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 78.504586] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 78.504659] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 78.504731] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 78.504801] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 78.506489] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 78.506590] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 78.506681] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 78.506768] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 78.506852] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 78.506933] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 78.507019] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 78.507105] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 78.507202] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 78.507302] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 78.507400] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 78.507494] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 78.507574] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 78.507654] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 78.507739] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 78.507818] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 78.507897] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 78.507979] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 78.508072] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 78.508183] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 78.508277] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 78.508375] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 78.508475] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 78.508570] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 78.508662] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 78.508753] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 78.508843] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 78.508933] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 78.509019] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 78.509111] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 78.510703] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 78.513595] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 78.513755] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 78.513902] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 78.514148] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 78.514741] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 78.514975] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 78.515123] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 78.515259] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 78.515397] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 78.515528] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 78.515657] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 78.515782] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 78.515904] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 78.516027] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 78.516177] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 78.516433] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 78.516560] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 78.516683] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 78.516801] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 78.516917] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 78.517189] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 78.517486] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 78.518960] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 78.519289] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<6>[ 78.520475] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 78.521896] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 78.522809] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 78.523664] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 78.525063] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 78.525596] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 78.527749] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 78.537554] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 78.537564] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 78.537566] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.537567] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 78.537570] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.537571] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 78.537576] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.537577] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 78.537579] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 78.537617] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 78.537619] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 78.537620] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.537628] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 78.538160] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 78.538721] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 78.538841] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 78.538984] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 78.539118] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 78.539289] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 78.539401] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 78.539509] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 78.539598] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 78.539683] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 78.539800] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 78.539986] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 78.540158] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 78.540303] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 78.540664] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 78.540789] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 78.540900] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 78.541099] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 78.541217] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 78.541345] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 78.541817] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 78.541935] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 78.542047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 78.542124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 78.542218] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 78.542313] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 78.542405] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 78.542493] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 78.542564] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 78.542638] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 78.542710] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 78.542781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 78.542847] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 78.542912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 78.542976] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 78.543040] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 78.543104] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 78.543167] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 78.543258] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 78.543348] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 78.543436] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 78.544219] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 78.544344] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 78.544437] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 78.544527] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 78.544590] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 78.544652] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 78.544712] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 78.544775] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 78.544844] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 78.544910] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 78.544976] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 78.545039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 78.545105] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 78.545177] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 78.545266] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 78.545347] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 78.545425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 78.545526] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 78.545605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 78.545676] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 78.545746] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 78.545888] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 78.545964] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 78.546031] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 78.546100] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 78.546169] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 78.546257] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 78.546338] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 78.546453] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 78.546524] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 78.546582] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 78.546644] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 78.546706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 78.546767] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 78.546828] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 78.546922] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 78.546994] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 78.547066] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 78.547132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 78.547199] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 78.547275] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 78.547352] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 78.547495] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 78.547583] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 78.547763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 78.547862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 78.547957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 78.548038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 78.548116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 78.548198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 78.548297] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 78.548395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 78.548493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 78.548570] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 78.548643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 78.548716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 78.548790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 78.548864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 78.548939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 78.549007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 78.549074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 78.549142] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 78.549214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 78.549299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 78.549385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 78.549473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 78.549549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 78.549619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 78.549687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 78.549754] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 78.549820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 78.549885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 78.549949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 78.550013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 78.550075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 78.550137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 78.550203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 78.550278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 78.550357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 78.550438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 78.550519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 78.550583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 78.550645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 78.550710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 78.550775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 78.550839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 78.550902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 78.551116] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 78.551200] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 78.551296] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 78.551574] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 78.551659] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 78.566705] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 78.597385] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 78.784601] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 78.784604] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 78.784606] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 78.784712] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 78.784826] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 78.784923] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 78.785008] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 78.785103] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 78.785187] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 78.785273] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 78.785331] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 78.785390] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 78.785446] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 78.786263] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 78.786330] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 78.786399] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 78.786465] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 78.786526] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 78.786588] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 78.786648] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 78.786721] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 78.786787] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 78.786852] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 78.786922] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 78.786986] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 78.787046] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 78.787104] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 78.787164] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 78.787223] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 78.787281] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 78.787337] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 78.787393] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 78.787447] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 78.787500] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 78.787552] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 78.787602] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 78.787653] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 78.787713] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 78.787764] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 78.787827] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 78.787895] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 78.787963] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 78.788037] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 78.788110] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 78.788178] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 78.788243] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 78.788305] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 78.788367] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 78.788428] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 78.788492] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 78.788555] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 78.788807] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 78.788878] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 78.788941] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 78.789253] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 78.789306] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 78.789357] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 78.789537] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 78.789599] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 78.789655] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 78.789720] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 78.789779] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 78.789837] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 78.790253] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 78.790317] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 78.790376] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 78.790434] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 78.790491] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 78.790547] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 78.790602] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 78.790656] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 78.790720] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 78.790775] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 78.790829] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 78.790882] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 78.790933] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 78.790985] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 78.791051] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 78.791199] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 78.794103] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 78.807650] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 78.808434] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 78.808515] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 78.817943] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 78.818314] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 78.819145] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 78.819239] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 78.819325] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 78.819402] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 78.819483] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 78.819557] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 78.819631] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 78.819701] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 78.819794] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 78.822704] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 78.822811] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 78.822903] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 78.826549] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 78.831688] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 78.831692] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 78.831694] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 78.831696] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 78.831698] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 78.831699] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 78.831700] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 78.831702] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 78.831703] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 78.831704] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 78.831758] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 78.831975] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 78.832150] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 78.833047] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 78.833179] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 78.833309] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 78.833431] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 78.833551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 78.833669] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 78.833786] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 78.833895] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 78.833998] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 78.834098] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 78.834196] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 78.834288] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 78.834376] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 78.834461] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 78.834545] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 78.834626] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 78.834705] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 78.834789] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 78.834867] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 78.834941] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 78.835014] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 78.835086] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 78.835157] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 78.835229] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 78.835301] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 78.835369] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 78.835450] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 78.836206] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 78.836283] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 78.836594] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 78.836669] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 78.837156] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 78.837233] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 78.837299] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 78.837362] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 78.837423] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 78.837481] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 78.837539] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 78.837594] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 78.837648] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 78.837702] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 78.837754] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 78.837817] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 78.837885] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 78.837951] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 78.838035] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 78.838124] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 78.853787] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 78.854839] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 78.855084] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 78.874925] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 78.875309] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 78.876136] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 78.878712] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 78.880837] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 78.923006] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 78.925372] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 78.925794] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 78.926240] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 78.926604] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 78.926916] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 78.927355] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 78.927689] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 78.928023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 78.928337] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 78.929911] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 78.930392] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 78.930692] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 78.940785] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 78.951364] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 78.957394] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 78.958375] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 78.961016] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 78.961227] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 78.961811] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 78.962734] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 78.962786] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 78.963280] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 78.963943] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 78.963986] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 78.964476] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 78.965169] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 78.965200] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 78.965244] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 78.973265] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 78.975750] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 78.976850] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 78.976954] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 78.978160] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 78.978316] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 78.978447] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 78.978539] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 78.978648] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 78.978740] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 78.978824] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 78.978929] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 78.979017] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 78.979105] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 78.979134] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 78.979251] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 78.979361] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 78.979463] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 78.979657] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 78.979921] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 78.979936] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 78.980760] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 78.981292] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 78.981402] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 78.981499] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 78.981653] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 78.981657] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 78.981659] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.981660] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 78.981662] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.981663] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 78.981667] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.981668] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 78.981669] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.981688] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 78.981777] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 78.982429] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 78.982544] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 78.983531] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<7>[ 78.983775] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<5>[ 78.984064] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 78.984066] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 78.984067] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 78.984114] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 78.984126] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 78.984136] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 78.984145] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 78.984306] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 78.984317] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 78.984325] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 78.984462] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 78.984470] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 78.984476] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 78.984590] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 78.984598] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 78.984600] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 78.984603] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 78.984605] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 78.984667] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 78.984676] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 78.984678] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 78.984680] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 78.984682] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 78.984693] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 78.984717] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 78.984752] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 78.991319] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d94000
<6>[ 78.992070] fbcon: xedrmfb (fb0) is primary device
<7>[ 78.992963] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 78.993087] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 78.993216] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 78.993346] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 78.993466] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 78.993585] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 78.993686] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 78.993777] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 78.993873] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 78.993971] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 78.994067] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 78.994179] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 78.994292] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 78.994406] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 78.994520] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 78.994628] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 78.994735] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 78.994837] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 78.994929] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 78.995021] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 78.995120] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 78.995216] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 78.995310] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 78.995402] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 78.995494] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 78.995586] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 78.995679] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 78.995755] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 78.995833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 78.995937] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 78.996041] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 78.996197] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 78.996317] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 78.996423] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 78.996517] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 78.996595] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 78.996666] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 78.996740] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.996813] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.996886] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.996971] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 78.997055] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997146] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997229] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997319] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 78.997412] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997499] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997578] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997656] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 78.997734] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997811] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997875] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.997939] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 78.998002] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.998067] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.998138] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 78.998221] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 78.998336] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 78.998446] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 78.998539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 78.998625] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 78.998709] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 78.998808] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 78.998941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 78.999060] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 78.999175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 78.999276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 78.999376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 78.999465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 78.999545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 78.999622] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 78.999699] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 78.999775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 78.999852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 78.999929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 79.000003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 79.000077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 79.000161] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 79.000255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 79.000345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 79.000435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 79.000515] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 79.000586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 79.000656] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 79.000721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 79.000783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 2859, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 79.000846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 2753, vmin vtotal: 1906, vmax vtotal: 2859
<7>[ 79.000908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 79.000970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 79.001033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 79.001102] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 79.001197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 79.001288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 79.001375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 79.001454] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 79.001524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 79.001595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 79.001664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 79.001733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 79.001802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 79.001870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 79.001937] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 79.002004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 79.002071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 79.002152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 79.002234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 79.002318] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 79.002404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 79.002475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 79.002545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 79.002626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 79.002709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 79.002783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 79.002849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 79.002915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 79.002975] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 79.003034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 79.003092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 79.006524] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 79.027058] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 79.027537] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 79.050371] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 79.215629] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 79.216332] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 79.227005] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 79.227239] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 79.227346] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000003 PP_CONTROL: 0x00000060
<7>[ 79.227523] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 79.227673] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 79.279630] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 79.279741] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 79.308778] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 79.308913] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 79.308950] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 79.309811] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 79.309828] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 79.309946] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 79.310061] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 79.310176] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 79.310267] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 79.310346] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 79.310422] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 79.310502] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 79.310579] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 79.310655] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 79.310728] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 79.310814] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 79.310903] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 79.310988] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 79.311078] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 79.312428] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 79.312519] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (497 ms remaining)
<7>[ 79.314750] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 79.314860] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 79.314960] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 79.315087] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 79.450286] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 79.815916] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 79.816036] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 79.816133] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 79.816239] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 79.852295] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 79.852407] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 79.852495] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 79.852620] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 80.016469] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 80.016479] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 80.016490] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 80.113383] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 80.115710] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 80.115835] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 80.118434] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 80.119602] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 80.120320] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 80.121071] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 80.121926] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 80.122830] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 80.122933] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 80.124199] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 80.124318] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 80.124853] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 80.125049] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 80.125170] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 80.125265] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 80.125846] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 80.125853] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 80.125940] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 80.141840] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 80.143739] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 80.144196] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 80.145302] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 80.146931] Console: switching to colour frame buffer device 180x56
<6>[ 80.161792] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 80.180877] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 80.180928] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 80.180699] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 80.181146] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 80.181517] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 80.181673] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 80.181716] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 80.181829] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 80.182181] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 80.182486] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 80.182757] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 80.183018] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 80.183271] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 80.183208] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 80.183550] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 80.183855] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 80.184097] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 80.184112] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 80.184335] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 80.184492] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 80.184608] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 80.184836] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 80.184888] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 80.185143] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 80.185485] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 80.185504] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 80.185510] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.185515] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 80.185524] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.185530] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 80.185547] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.185552] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 80.185561] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.185412] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 80.185621] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 80.185719] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 80.185964] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 80.185972] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 80.186205] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 80.186451] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 80.186743] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 80.187008] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 80.187379] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 80.187978] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 80.188317] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 80.188684] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 80.189482] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 80.189864] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 80.190286] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<5>[ 80.191418] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 80.191425] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 80.191429] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.191534] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 80.191577] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 80.191607] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 80.191634] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 80.192171] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 80.192580] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 80.192933] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 80.193337] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 80.193742] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 80.193775] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 80.193801] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 80.194183] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 80.194560] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 80.194591] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 80.194617] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 80.195047] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 80.195398] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 80.195440] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 80.195452] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 80.195460] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 80.195469] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 80.195811] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 80.195856] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 80.195867] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 80.195877] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 80.195887] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 80.195937] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 80.195845] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 80.200474] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 80.200824] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 80.212389] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 80.264365] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 80.268044] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 80.268652] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 80.268828] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 80.276451] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 80.276752] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 80.276905] [IGT] xe_module_load: exiting, ret=0
<7>[ 80.297634] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 80.297817] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 80.297932] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 80.311940] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 80.312072] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 80.312165] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 80.312252] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 80.312336] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 80.312419] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 80.312501] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 80.312582] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 80.312693] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 80.312775] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 80.312856] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 80.312937] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 80.313018] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 80.313099] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 80.313179] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 80.313259] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 80.313339] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 80.313420] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 80.313500] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 80.313580] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 80.313665] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 80.313746] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 80.313826] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 80.313906] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 80.313986] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 80.314066] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 80.314145] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 80.314225] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 80.314306] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 80.314387] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 80.314469] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 80.314551] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 80.314639] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 80.314723] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 80.314803] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 80.314884] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 80.316127] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 80.316251] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<6>[ 80.326793] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 80.327924] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 80.329102] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 80.331364] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 81.234352] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 81.234485] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 81.234614] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 81.404068] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 82.710233] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 82.710655] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067