<5>[ 0.000000] Linux version 6.13.0-rc3-xe+ (builder@lgci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Dec 19 14:40:51 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<5>[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x68f8d518 ESRT=0x68fa4818 MOKvar=0x6cd0c000
<6>[ 0.000000] efi: Remove mem284: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem286: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000365] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000366] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004219] esrt: Reserving ESRT space from 0x0000000068fa4818 to 0x0000000068fa4968.
<7>[ 0.004227] e820: update [mem 0x68fa4000-0x68fa4fff] usable ==> reserved
<6>[ 0.004246] Using GB pages for direct mapping
<6>[ 0.004911] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.004913] printk: early log buf free: 258856(98%)
<6>[ 0.004913] Secure boot disabled
<6>[ 0.004915] ACPI: Early table checksum verification disabled
<6>[ 0.004919] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.004921] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004925] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.004928] ACPI: DSDT 0x000000006FFB7000 025212 (v02 INTEL LNL 00000002 01000013)
<6>[ 0.004929] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.004931] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.004932] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.004934] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.004935] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.004936] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.004938] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.004939] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.004940] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.004942] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.004943] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.004944] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.004946] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.004947] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.004948] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.004950] ACPI: SSDT 0x000000006FFDE000 008F36 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.004951] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.004952] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.004954] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.004955] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.004956] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004958] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004959] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.004960] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004961] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.004963] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.004964] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.004966] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004967] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.004968] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.004969] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004971] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004972] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004973] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.004975] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.004976] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.004977] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004979] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004980] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.004981] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.004983] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.004984] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.004985] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.004987] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.004988] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.004989] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.004991] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004992] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.004993] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc211]
<6>[ 0.004993] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.004993] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.004994] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.004994] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.004994] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.004995] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.004995] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.004995] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.004996] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.004996] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.004996] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.004996] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.004997] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.004997] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.004997] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.004998] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6f35]
<6>[ 0.004998] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.004998] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.004999] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.004999] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.004999] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.004999] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005000] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.005000] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.005000] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.005001] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.005001] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.005001] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.005002] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.005002] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.005002] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.005003] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.005003] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.005003] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.005003] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.005004] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.005004] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.005004] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.005005] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.005005] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.005005] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.005006] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.005006] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.005006] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.005007] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.005007] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.005007] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005090] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005439] No NUMA configuration found
<6>[ 0.005439] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005444] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<5>[ 5.960751] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
<6>[ 5.960802] Zone ranges:
<6>[ 5.960802] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 5.960803] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 5.960804] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 5.960805] Device empty
<6>[ 5.960805] Movable zone start for each node
<6>[ 5.960806] Early memory node ranges
<6>[ 5.960807] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 5.960808] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 5.960808] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 5.960809] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 5.960810] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 5.960815] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 5.960834] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 5.962873] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 5.991465] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 5.991529] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 5.992238] ACPI: PM-Timer IO Port: 0x1808
<6>[ 5.992244] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 5.992295] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 5.992297] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 5.992298] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 5.992301] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 5.992301] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 5.992311] e820: update [mem 0x68f42000-0x68f5cfff] usable ==> reserved
<6>[ 5.992317] TSC deadline timer available
<6>[ 5.992319] CPU topo: Max. logical packages: 1
<6>[ 5.992320] CPU topo: Max. logical dies: 1
<6>[ 5.992320] CPU topo: Max. dies per package: 1
<6>[ 5.992321] CPU topo: Max. threads per core: 1
<6>[ 5.992322] CPU topo: Num. cores per package: 8
<6>[ 5.992322] CPU topo: Num. threads per package: 8
<6>[ 5.992322] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 5.992334] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 5.992336] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 5.992337] PM: hibernation: Registered nosave memory: [mem 0x68f42000-0x68f5cfff]
<6>[ 5.992337] PM: hibernation: Registered nosave memory: [mem 0x68fa4000-0x68fa4fff]
<6>[ 5.992338] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 5.992339] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 5.992339] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 5.992340] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 5.992340] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 5.992340] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 5.992340] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 5.992341] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 5.992342] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 5.992343] Booting paravirtualized kernel on bare hardware
<6>[ 5.992345] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 5.992353] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 5.992686] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 5.992690] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 5.992692] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 5.992705] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<5>[ 5.992774] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 5.992788] random: crng init done
<6>[ 5.994622] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 5.995542] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 5.995598] Fallback order for Node 0: 0
<6>[ 5.995601] Built 1 zonelists, mobility grouping on. Total pages: 8285792
<6>[ 5.995602] Policy zone: Normal
<6>[ 5.995611] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 5.995612] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 5.995614] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 5.996580] software IO TLB: area num 8.
<4>[ 6.041689] **********************************************************
<4>[ 6.041690] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 6.041691] ** **
<4>[ 6.041691] ** This system shows unhashed kernel memory addresses **
<4>[ 6.041691] ** via the console, logs, and other interfaces. This **
<4>[ 6.041691] ** might reduce the security of your system. **
<4>[ 6.041692] ** **
<4>[ 6.041692] ** If you see this message and you are not debugging **
<4>[ 6.041692] ** the kernel, report this immediately to your system **
<4>[ 6.041692] ** administrator! **
<4>[ 6.041692] ** **
<4>[ 6.041692] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 6.041693] **********************************************************
<6>[ 6.042763] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 6.043083] ftrace: allocating 59311 entries in 232 pages
<6>[ 6.068299] ftrace: allocated 232 pages with 4 groups
<6>[ 6.069532] Dynamic Preempt: voluntary
<6>[ 6.069989] Running RCU self tests
<6>[ 6.069990] Running RCU synchronous self tests
<6>[ 6.069997] rcu: Preemptible hierarchical RCU implementation.
<6>[ 6.069997] rcu: RCU lockdep checking is enabled.
<6>[ 6.069997] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 6.069998] Trampoline variant of Tasks RCU enabled.
<6>[ 6.069998] Rude variant of Tasks RCU enabled.
<6>[ 6.069999] Tracing variant of Tasks RCU enabled.
<6>[ 6.069999] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 6.069999] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 6.070039] Running RCU synchronous self tests
<6>[ 6.070044] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 6.070047] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 6.070050] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 6.079953] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 6.080440] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 6.080783] Console: colour dummy device 80x25
<6>[ 6.080791] printk: legacy console [tty0] enabled
<6>[ 6.081981] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 6.081988] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 6.081992] ... MAX_LOCK_DEPTH: 48
<6>[ 6.081995] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 6.081999] ... CLASSHASH_SIZE: 4096
<6>[ 6.082003] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 6.082007] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 6.082011] ... CHAINHASH_SIZE: 262144
<6>[ 6.082014] memory used by lock dependency info: 54145 kB
<6>[ 6.082019] memory used for stack traces: 4224 kB
<6>[ 6.082023] per task-struct memory footprint: 1920 bytes
<6>[ 6.082073] ACPI: Core revision 20240827
<6>[ 6.082958] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 6.083039] APIC: Switch to symmetric I/O mode setup
<6>[ 6.083045] DMAR: Host address width 38
<6>[ 6.083049] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 6.083079] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 6.083115] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 6.083140] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 6.083164] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 6.083273] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 6.083453] DMAR: SATC flags: 0x1
<6>[ 6.083464] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 6.083469] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 6.083474] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 6.085201] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 6.089656] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 6.089674] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 6.089750] CPU0: Thermal monitoring enabled (TM1)
<6>[ 6.089756] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 6.089953] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 6.089958] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 6.089968] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 6.089975] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 6.089980] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 6.089987] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 6.089994] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 6.090010] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 6.090017] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 6.090023] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 6.090028] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 6.090035] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 6.090042] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 6.090047] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 6.090051] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 6.090056] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 6.090669] Freeing SMP alternatives memory: 48K
<6>[ 6.090669] pid_max: default: 32768 minimum: 301
<6>[ 6.090669] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 6.090669] landlock: Up and running.
<6>[ 6.090669] Yama: becoming mindful.
<6>[ 6.090669] AppArmor: AppArmor initialized
<6>[ 6.090669] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 6.090669] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 6.090669] Running RCU synchronous self tests
<6>[ 6.090669] Running RCU synchronous self tests
<6>[ 6.090669] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 6.090669] Running RCU Tasks wait API self tests
<6>[ 6.090669] Running RCU Tasks Rude wait API self tests
<6>[ 6.090669] Running RCU Tasks Trace wait API self tests
<6>[ 6.090669] Performance Events: XSAVE Architectural LBR, no PEBS fmt6+, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 6.090669] core: cpu_core PMU driver:
<6>[ 6.090669] ... version: 6
<6>[ 6.090673] ... bit width: 48
<6>[ 6.090677] ... generic registers: 10
<6>[ 6.090681] ... value mask: 0000ffffffffffff
<6>[ 6.090686] ... max period: 00007fffffffffff
<6>[ 6.090692] ... fixed-purpose events: 4
<6>[ 6.090696] ... event mask: 0001000f000003ff
<6>[ 6.090729] signal: max sigframe size: 3632
<6>[ 6.090753] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 6.090835] rcu: Hierarchical SRCU implementation.
<6>[ 6.090840] rcu: Max phase no-delay instances is 400.
<6>[ 6.090965] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 6.092717] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 6.092980] smp: Bringing up secondary CPUs ...
<6>[ 6.093330] smpboot: x86: Booting SMP configuration:
<6>[ 6.093337] .... node #0, CPUs: #1 #2 #3
<6>[ 6.097858] Callback from call_rcu_tasks_trace() invoked.
<4>[ 6.102646] #4 #5 #6 #7
<6>[ 0.010032] core: cpu_atom PMU driver:
<6>[ 0.010032] ... version: 6
<6>[ 0.010032] ... bit width: 48
<6>[ 0.010032] ... generic registers: 8
<6>[ 0.010032] ... value mask: 0000ffffffffffff
<6>[ 0.010032] ... max period: 00007fffffffffff
<6>[ 0.010032] ... fixed-purpose events: 6
<6>[ 0.010032] ... event mask: 00000077000000ff
<6>[ 6.113812] smp: Brought up 1 node, 8 CPUs
<6>[ 6.114923] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 6.116895] Memory: 32345564K/33143168K available (24576K kernel code, 5584K rwdata, 9228K rodata, 5612K init, 68412K bss, 775240K reserved, 0K cma-reserved)
<6>[ 6.118111] devtmpfs: initialized
<6>[ 6.118111] x86/mm: Memory block size: 128MB
<6>[ 6.133946] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 6.134151] Running RCU synchronous self tests
<6>[ 6.134163] Running RCU synchronous self tests
<6>[ 6.134707] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 6.134707] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 6.134999] pinctrl core: initialized pinctrl subsystem
<6>[ 6.135512] PM: RTC time: 13:46:20, date: 2024-12-20
<6>[ 6.136452] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 6.137391] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 6.137778] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 6.138065] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 6.138136] audit: initializing netlink subsys (disabled)
<5>[ 6.138181] audit: type=2000 audit(1734702379.048:1): state=initialized audit_enabled=0 res=1
<6>[ 6.139287] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 6.139289] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 6.139295] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 6.139300] thermal_sys: Registered thermal governor 'user_space'
<6>[ 6.139304] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 6.139350] EISA bus registered
<6>[ 6.139376] cpuidle: using governor ladder
<6>[ 6.139376] cpuidle: using governor menu
<6>[ 6.139715] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 6.140097] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 6.140125] PCI: Using configuration type 1 for base access
<6>[ 6.140265] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 6.141923] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 6.141923] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 6.141923] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 6.141923] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 6.160670] raid6: avx2x4 gen() 68991 MB/s
<6>[ 6.177670] raid6: avx2x2 gen() 83039 MB/s
<6>[ 6.194670] raid6: avx2x1 gen() 76217 MB/s
<6>[ 6.194674] raid6: using algorithm avx2x2 gen() 83039 MB/s
<6>[ 6.211669] raid6: .... xor() 57441 MB/s, rmw enabled
<6>[ 6.211674] raid6: using avx2x2 recovery algorithm
<6>[ 6.215075] fbcon: Taking over console
<6>[ 6.216341] ACPI: Added _OSI(Module Device)
<6>[ 6.216395] ACPI: Added _OSI(Processor Device)
<6>[ 6.216442] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 6.216487] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 6.941747] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 6.955717] ACPI: EC: EC started
<6>[ 6.955729] ACPI: EC: interrupt blocked
<6>[ 6.958077] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 6.958082] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 6.961763] Callback from call_rcu_tasks() invoked.
<6>[ 7.235185] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 7.235194] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 7.311475] ACPI: Interpreter enabled
<6>[ 7.312126] ACPI: PM: (supports S0 S4 S5)
<6>[ 7.312139] ACPI: Using IOAPIC for interrupt routing
<6>[ 7.322641] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 7.322650] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 7.343237] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 7.343280] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 7.441959] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 7.443006] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 7.451870] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 8.000975] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 8.025493] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 8.056377] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 8.061505] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 8.090296] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 8.115892] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 8.116623] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 8.117375] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 8.255186] ACPI: \: Can't tag data node
<3>[ 8.256363] ACPI: \: Can't tag data node
<3>[ 8.257530] ACPI: \: Can't tag data node
<3>[ 8.258790] ACPI: \: Can't tag data node
<3>[ 8.259918] ACPI: \: Can't tag data node
<6>[ 8.454376] ACPI: \_TZ_.FN00: New power resource
<6>[ 8.454899] ACPI: \_TZ_.FN01: New power resource
<6>[ 8.455395] ACPI: \_TZ_.FN02: New power resource
<6>[ 8.455907] ACPI: \_TZ_.FN03: New power resource
<6>[ 8.456393] ACPI: \_TZ_.FN04: New power resource
<6>[ 8.458001] ACPI: \PIN_: New power resource
<6>[ 8.461636] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 8.461651] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 8.466103] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 8.483482] PCI host bridge to bus 0000:00
<6>[ 8.483571] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 8.483594] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 8.483614] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 8.483635] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 8.483655] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 8.484142] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 8.495178] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 8.496900] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 8.497108] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 8.497266] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 8.497453] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 8.497561] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 8.501386] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 8.501431] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 8.507928] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 8.507951] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 8.507969] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 8.509064] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 8.509111] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 8.509124] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 8.509143] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 8.509287] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 8.509348] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 8.515500] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 8.515546] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 8.515558] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 8.515576] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 8.515710] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 8.515763] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 8.520143] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 8.520190] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 8.520201] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 8.520218] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 8.520339] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 8.520399] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 8.525464] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 8.525484] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 8.525515] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 8.525715] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 8.525731] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 8.525748] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 8.526159] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 8.526186] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 8.526282] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 8.527839] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 8.527866] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 8.527885] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 8.527964] pci 0000:00:0d.2: supports D1 D2
<6>[ 8.527968] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 8.529216] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 8.529242] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 8.529261] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 8.529340] pci 0000:00:0d.3: supports D1 D2
<6>[ 8.529344] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 8.530661] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 8.530691] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 8.531227] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 8.533647] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 8.533690] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 8.533834] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 8.534232] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 8.534258] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 8.534352] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 8.536420] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 8.536448] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 8.536466] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 8.536760] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.536824] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 8.538259] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.538319] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 8.539813] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.539871] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 8.541272] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.541331] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 8.542927] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 8.542966] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 8.543127] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 8.545526] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 8.545556] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027]
<6>[ 8.545574] pci 0000:00:16.3: BAR 1 [mem 0x94321000-0x94321fff]
<6>[ 8.546101] pci 0000:00:1c.0: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 8.546265] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 8.546296] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff]
<6>[ 8.546785] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 8.547268] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 8.552386] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 8.553731] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 8.553781] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 8.553842] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 8.553964] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 8.554351] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 8.554380] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 8.554407] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 8.555731] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 8.555773] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 8.556079] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 8.556107] pci 0000:00:1f.6: BAR 0 [mem 0x94300000-0x9431ffff]
<6>[ 8.556230] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 8.557348] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 8.557373] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 8.557390] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 8.557408] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 8.557947] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 8.558106] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 8.558446] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 8.559499] pci 0000:7f:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 8.559527] pci 0000:7f:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 8.560207] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 8.560292] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 8.961873] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 18.955288] Low-power S0 idle used by default for system suspend
<6>[ 19.008251] ACPI: EC: interrupt unblocked
<6>[ 19.008262] ACPI: EC: event unblocked
<6>[ 19.008297] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 19.008303] ACPI: EC: GPE=0x6e
<6>[ 19.008309] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 19.008318] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 19.009721] iommu: Default domain type: Translated
<6>[ 19.009721] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 19.011146] SCSI subsystem initialized
<7>[ 19.011183] libata version 3.00 loaded.
<6>[ 19.011790] ACPI: bus type USB registered
<6>[ 19.011871] usbcore: registered new interface driver usbfs
<6>[ 19.011908] usbcore: registered new interface driver hub
<6>[ 19.011954] usbcore: registered new device driver usb
<6>[ 19.012082] pps_core: LinuxPPS API ver. 1 registered
<6>[ 19.012086] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 19.012104] PTP clock support registered
<6>[ 19.013849] EDAC MC: Ver: 3.0.0
<6>[ 19.018020] efivars: Registered efivars operations
<6>[ 19.020925] NetLabel: Initializing
<6>[ 19.020939] NetLabel: domain hash size = 128
<6>[ 19.020950] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 19.021122] NetLabel: unlabeled traffic allowed by default
<6>[ 19.021162] mctp: management component transport protocol core
<6>[ 19.021176] NET: Registered PF_MCTP protocol family
<6>[ 19.021266] PCI: Using ACPI for IRQ routing
<7>[ 19.073438] PCI: pci_cache_line_size set to 64 bytes
<6>[ 19.073696] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 19.073987] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 19.074006] e820: reserve RAM buffer [mem 0x68f42000-0x6bffffff]
<7>[ 19.074014] e820: reserve RAM buffer [mem 0x68fa4000-0x6bffffff]
<7>[ 19.074021] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 19.074028] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 19.075739] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 19.075765] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 19.075778] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 19.075815] vgaarb: loaded
<6>[ 19.076033] clocksource: Switched to clocksource tsc-early
<5>[ 19.077617] VFS: Disk quotas dquot_6.6.0
<6>[ 19.077641] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 19.078501] AppArmor: AppArmor Filesystem Enabled
<6>[ 19.078677] pnp: PnP ACPI init
<6>[ 19.079612] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 19.079625] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 19.081117] system 00:02: [io 0x06a4] has been reserved
<6>[ 19.081128] system 00:02: [io 0x06a0] has been reserved
<6>[ 19.102714] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 19.102726] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 19.102738] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 19.102746] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 19.102753] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 19.102763] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 19.102772] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 19.102780] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 19.105450] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 19.107822] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 19.107967] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 19.112915] pnp: PnP ACPI: found 8 devices
<6>[ 19.140299] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 19.140825] NET: Registered PF_INET protocol family
<6>[ 19.141175] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 19.144755] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 19.145080] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 19.145419] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 19.146654] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 19.148734] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 19.149415] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 19.151090] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 19.152809] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 19.152938] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 19.152958] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 19.152973] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 19.153064] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 19.153074] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 19.153084] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 19.153096] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 19.153172] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 19.153224] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 19.153275] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 19.153325] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 19.153371] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 19.153560] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 19.153573] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 19.153584] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 19.153600] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 19.153611] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 19.153623] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 19.153635] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 19.153650] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 19.153659] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 19.153671] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 19.153683] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 19.153700] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 19.153778] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff]
<6>[ 19.153874] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 19.153882] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 19.153891] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 19.153900] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 19.153909] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 19.153919] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 19.153927] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 19.153935] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 19.153945] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 19.153953] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 19.153961] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 19.153971] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 19.153978] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 19.153986] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 19.153997] pci_bus 0000:7f: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 19.155631] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 19.158165] PCI: CLS 0 bytes, default 64
<6>[ 19.158283] DMAR: Intel-IOMMU force enabled due to platform opt in
<6>[ 19.158324] DMAR: No RMRR found
<6>[ 19.158340] DMAR: No ATSR found
<6>[ 19.158346] DMAR: IOMMU feature nwfs inconsistent
<6>[ 19.158351] DMAR: IOMMU feature dit inconsistent
<6>[ 19.158366] DMAR: IOMMU feature sc_support inconsistent
<6>[ 19.158373] DMAR: IOMMU feature dev_iotlb_support inconsistent
<6>[ 19.158381] DMAR: dmar1: Using Queued invalidation
<6>[ 19.158413] DMAR: dmar0: Using Queued invalidation
<6>[ 19.158424] DMAR: dmar2: Using Queued invalidation
<6>[ 19.159657] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 19.159765] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 19.159867] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 19.159952] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 19.160927] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 19.161661] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 19.161881] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 19.161986] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 19.162102] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 19.162213] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 19.162282] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 19.162337] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 19.162425] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 19.162513] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 19.162609] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 19.162672] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 19.162799] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 19.162855] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 19.162914] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 19.162970] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 19.163074] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 19.163132] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 19.163289] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 19.163426] pci 0000:00:1f.0: Adding to iommu group 16
<6>[ 19.163484] pci 0000:00:1f.3: Adding to iommu group 16
<6>[ 19.163547] pci 0000:00:1f.4: Adding to iommu group 16
<6>[ 19.163617] pci 0000:00:1f.5: Adding to iommu group 16
<6>[ 19.163679] pci 0000:00:1f.6: Adding to iommu group 16
<6>[ 19.163739] pci 0000:00:1f.7: Adding to iommu group 16
<6>[ 19.163899] pci 0000:7f:00.0: Adding to iommu group 17
<6>[ 19.164584] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 19.164595] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 19.164604] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 19.173014] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 19.173339] clocksource: Switched to clocksource tsc
<6>[ 19.173494] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 19.179404] Initialise system trusted keyrings
<5>[ 19.179512] Key type blacklist registered
<6>[ 19.179778] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 19.189766] zbud: loaded
<6>[ 19.191276] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 19.191429] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 19.191437] ntfs3: Read-only LZX/Xpress compression included
<5>[ 19.191948] integrity: Platform Keyring initialized
<5>[ 19.191975] integrity: Machine keyring initialized
<6>[ 19.198849] xor: automatically using best checksumming function avx
<5>[ 19.198860] Key type asymmetric registered
<5>[ 19.198873] Asymmetric key parser 'x509' registered
<6>[ 19.199017] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 19.199353] io scheduler mq-deadline registered
<6>[ 19.200533] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 19.202892] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 19.203464] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 19.205333] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 19.205820] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 19.207506] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 19.207994] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 19.209926] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 19.210427] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 19.211170] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 19.214360] Monitor-Mwait will be used to enter C-1 state
<7>[ 19.214501] Monitor-Mwait will be used to enter C-2 state
<7>[ 19.214555] Monitor-Mwait will be used to enter C-3 state
<6>[ 19.222326] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 19.222533] ACPI: button: Lid Switch [LID0]
<6>[ 19.222786] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 19.222957] ACPI: button: Sleep Button [SLPB]
<6>[ 19.223198] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 19.223613] ACPI: button: Power Button [PWRB]
<4>[ 19.237688] ACPI Warning: \_SB.PR00._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.245063] ACPI Warning: \_SB.PR01._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.254596] ACPI Warning: \_SB.PR02._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.263496] ACPI Warning: \_SB.PR03._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.272670] ACPI Warning: \_SB.PR04._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.280539] ACPI Warning: \_SB.PR05._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.288089] ACPI Warning: \_SB.PR06._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<4>[ 19.295430] ACPI Warning: \_SB.PR07._CPC: Return Package type mismatch at index 24 - found Package, expected Integer/Buffer (20240827/nspredef-260)
<6>[ 19.390264] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 19.390282] ACPI: thermal: Thermal Zone [TZ00] (69 C)
<6>[ 19.391395] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 19.391773] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 19.392639] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 19.414729] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 19.429124] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 19.431391] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 19.454137] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 19.456258] hpet_acpi_add: no address or irqs in _CRS
<6>[ 19.456512] Linux agpgart interface v0.103
<6>[ 19.457235] ACPI: bus type drm_connector registered
<6>[ 19.477082] loop: module loaded
<6>[ 19.520128] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 19.650278] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 19.825260] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 19.992182] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 20.218598] Key type psk registered
<6>[ 20.224061] nvme 0000:7f:00.0: platform quirk: setting simple suspend
<6>[ 20.225336] tun: Universal TUN/TAP device driver, 1.6
<6>[ 20.225415] nvme nvme0: pci function 0000:7f:00.0
<6>[ 20.227750] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 20.227931] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 20.231240] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 20.233282] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 20.233318] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 20.233335] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 20.233916] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
<6>[ 20.233933] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.233941] usb usb1: Product: xHCI Host Controller
<6>[ 20.233946] usb usb1: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 20.233954] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 20.236349] hub 1-0:1.0: USB hub found
<6>[ 20.236442] hub 1-0:1.0: 1 port detected
<6>[ 20.241245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
<6>[ 20.241263] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.241277] usb usb2: Product: xHCI Host Controller
<6>[ 20.241286] usb usb2: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 20.241297] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 20.242762] hub 2-0:1.0: USB hub found
<6>[ 20.242839] hub 2-0:1.0: 3 ports detected
<6>[ 20.260282] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 20.260305] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 20.261464] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 20.262565] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 20.262581] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 20.262595] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 20.262957] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
<6>[ 20.262965] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.262971] usb usb3: Product: xHCI Host Controller
<6>[ 20.262976] usb usb3: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 20.262980] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 20.264445] hub 3-0:1.0: USB hub found
<6>[ 20.264482] hub 3-0:1.0: 8 ports detected
<6>[ 20.273962] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 20.286822] nvme0n1: p1 p2
<6>[ 20.309163] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
<6>[ 20.309198] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 20.309221] usb usb4: Product: xHCI Host Controller
<6>[ 20.309236] usb usb4: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 20.309253] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 20.310921] hub 4-0:1.0: USB hub found
<6>[ 20.311000] hub 4-0:1.0: 2 ports detected
<6>[ 20.324844] usbcore: registered new interface driver usb-storage
<6>[ 20.325086] usbcore: registered new interface driver usbserial_generic
<6>[ 20.325241] usbserial: USB Serial support registered for generic
<6>[ 20.325339] usbcore: registered new interface driver ftdi_sio
<6>[ 20.325406] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 20.325508] usbcore: registered new interface driver pl2303
<6>[ 20.325569] usbserial: USB Serial support registered for pl2303
<6>[ 20.325774] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 20.325792] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>[ 20.561302] usb 3-4: new high-speed USB device number 2 using xhci_hcd
<6>[ 20.687631] usb 3-4: New USB device found, idVendor=0424, idProduct=7500, bcdDevice= 1.00
<6>[ 20.687811] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 20.687890] usb 3-4: Product: USB Gigabit LAN
<6>[ 20.687942] usb 3-4: Manufacturer: WS
<6>[ 20.687984] usb 3-4: SerialNumber: 000000017b
<3>[ 21.185807] i8042: Can't read CTR while initializing i8042
<3>[ 21.185828] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 21.189526] mousedev: PS/2 mouse device common for all mice
<6>[ 21.193715] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 21.196681] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 21.196964] rtc_cmos rtc_cmos: setting system clock to 2024-12-20T13:46:35 UTC (1734702395)
<6>[ 21.197292] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 21.197388] i2c_dev: i2c /dev entries driver
<6>[ 21.209019] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 21.209175] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 21.209245] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 21.209313] device-mapper: uevent: version 1.0.3
<6>[ 21.210400] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 21.211099] platform eisa.0: Probing EISA bus 0
<4>[ 21.211180] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 21.211240] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 21.211256] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 21.211270] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 21.211285] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 21.211300] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 21.211315] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 21.211329] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 21.211344] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 21.211356] platform eisa.0: EISA: Detected 0 cards
<6>[ 21.211368] intel_pstate: Intel P-state driver initializing
<6>[ 21.217344] Hybrid CPU capacity scaling enabled
<6>[ 21.219630] intel_pstate: HWP enabled
<6>[ 21.219642] sdhci: Secure Digital Host Controller Interface driver
<6>[ 21.219655] sdhci: Copyright(c) Pierre Ossman
<6>[ 21.219849] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 21.223752] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 21.224714] drop_monitor: Initializing network drop monitor service
<6>[ 21.224969] NET: Registered PF_INET6 protocol family
<6>[ 21.228161] Segment Routing with IPv6
<6>[ 21.228223] In-situ OAM (IOAM) with IPv6
<6>[ 21.228289] NET: Registered PF_PACKET protocol family
<5>[ 21.228518] Key type dns_resolver registered
<4>[ 21.232564] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 21.232941] microcode: Current revision: 0x0000011b
<6>[ 21.233529] IPI shorthand broadcast: enabled
<6>[ 21.244584] sched_clock: Marking stable (21235001867, 9032246)->(21325076632, -81042519)
<6>[ 21.245342] registered taskstats version 1
<5>[ 21.246763] Loading compiled-in X.509 certificates
<6>[ 21.273729] Demotion targets for Node 0: null
<6>[ 21.273941] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946)
<6>[ 21.273944] kmemleak: Automatic memory scanning thread started
<4>[ 21.273949] ------------[ cut here ]------------
<4>[ 21.273958] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
<4>[ 21.273973] WARNING: CPU: 0 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x51/0x80
<4>[ 21.273985] Modules linked in:
<4>[ 21.273990] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc3-xe+ #1
<4>[ 21.273998] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D97.2411281331 11/28/2024
<4>[ 21.274008] RIP: 0010:check_early_ioremap_leak+0x51/0x80
<4>[ 21.274014] Code: 48 83 c3 01 48 83 fb 08 75 e1 85 c0 75 0e 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 89 c6 48 c7 c7 d8 7f ea 82 e8 af c0 96 fd <0f> 0b b8 01 00 00 00 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 48
<4>[ 21.274028] RSP: 0000:ffffc900000f7dc0 EFLAGS: 00010246
<4>[ 21.274037] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
<4>[ 21.274044] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
<4>[ 21.274049] RBP: ffffc900000f7dd0 R08: 0000000000000000 R09: 0000000000000000
<4>[ 21.274055] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[ 21.274060] R13: ffffffff83ad0910 R14: ffffc900000f7de0 R15: 000000000003824c
<4>[ 21.274066] FS: 0000000000000000(0000) GS:ffff88885f200000(0000) knlGS:0000000000000000
<4>[ 21.274073] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 21.274078] CR2: ffff88887f7ff000 CR3: 0000000003248001 CR4: 0000000000f70ef0
<4>[ 21.274084] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 21.274090] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
<4>[ 21.274095] PKRU: 55555554
<4>[ 21.274098] Call Trace:
<4>[ 21.274101] <TASK>
<4>[ 21.274105] ? show_regs+0x6c/0x80
<4>[ 21.274112] ? __warn+0x93/0x1c0
<4>[ 21.274117] ? check_early_ioremap_leak+0x51/0x80
<4>[ 21.274123] ? report_bug+0x182/0x1b0
<4>[ 21.274129] ? handle_bug+0x6e/0xb0
<4>[ 21.274134] ? exc_invalid_op+0x18/0x80
<4>[ 21.274138] ? asm_exc_invalid_op+0x1b/0x20
<4>[ 21.274147] ? check_early_ioremap_leak+0x51/0x80
<4>[ 21.274152] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 21.274157] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 21.274162] do_one_initcall+0x76/0x400
<4>[ 21.274170] kernel_init_freeable+0x3da/0x6a0
<4>[ 21.274177] ? __pfx_kernel_init+0x10/0x10
<4>[ 21.274182] kernel_init+0x1b/0x200
<4>[ 21.274187] ret_from_fork+0x44/0x70
<4>[ 21.274192] ? __pfx_kernel_init+0x10/0x10
<4>[ 21.274197] ret_from_fork_asm+0x1a/0x30
<4>[ 21.274205] </TASK>
<4>[ 21.274207] irq event stamp: 82906645
<4>[ 21.274211] hardirqs last enabled at (82906653): [<ffffffff812a5a49>] __up_console_sem+0x79/0xa0
<4>[ 21.274220] hardirqs last disabled at (82906660): [<ffffffff812a5a2e>] __up_console_sem+0x5e/0xa0
<4>[ 21.274227] softirqs last enabled at (82906394): [<ffffffff811d54cf>] __irq_exit_rcu+0x13f/0x160
<4>[ 21.274235] softirqs last disabled at (82906387): [<ffffffff811d54cf>] __irq_exit_rcu+0x13f/0x160
<4>[ 21.274243] ---[ end trace 0000000000000000 ]---
<5>[ 21.274456] Key type .fscrypt registered
<5>[ 21.274461] Key type fscrypt-provisioning registered
<6>[ 21.277073] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 21.278718] Key type encrypted registered
<6>[ 21.278726] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 21.278926] ima: No TPM chip found, activating TPM-bypass!
<5>[ 21.278943] Loading compiled-in module X.509 certificates
<5>[ 21.279657] Loaded X.509 cert 'Build time autogenerated kernel key: 51735f5b25b25ad319dee9e24a5a78ef4a771f06'
<6>[ 21.279673] ima: Allocated hash algorithm: sha256
<6>[ 21.279721] ima: No architecture policies found
<6>[ 21.279817] evm: Initialising EVM extended attributes:
<6>[ 21.279822] evm: security.selinux
<6>[ 21.279825] evm: security.SMACK64
<6>[ 21.279828] evm: security.SMACK64EXEC
<6>[ 21.279832] evm: security.SMACK64TRANSMUTE
<6>[ 21.279835] evm: security.SMACK64MMAP
<6>[ 21.279838] evm: security.apparmor
<6>[ 21.279842] evm: security.ima
<6>[ 21.279844] evm: security.capability
<6>[ 21.279848] evm: HMAC attrs: 0x1
<6>[ 21.281780] PM: Magic number: 4:156:787
<6>[ 21.281983] printk: legacy console [netcon0] enabled
<6>[ 21.281990] netconsole: network logging started
<6>[ 21.282552] RAS: Correctable Errors collector initialized.
<6>[ 21.282770] clk: Disabling unused clocks
<6>[ 21.282781] PM: genpd: Disabling unused power domains
<6>[ 21.283850] md: Waiting for all devices to be available before autodetect
<6>[ 21.283858] md: If you don't use raid, use raid=noautodetect
<6>[ 21.283864] md: Autodetecting RAID arrays.
<6>[ 21.283874] md: autorun ...
<6>[ 21.283878] md: ... autorun DONE.
<6>[ 21.329913] EXT4-fs (nvme0n1p2): mounted filesystem 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f ro with ordered data mode. Quota mode: none.
<6>[ 21.329982] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 21.330874] devtmpfs: mounted
<6>[ 21.341539] Freeing unused decrypted memory: 2028K
<6>[ 21.342417] Freeing unused kernel image (initmem) memory: 5612K
<6>[ 21.342441] Write protecting the kernel read-only data: 34816k
<6>[ 21.342974] Freeing unused kernel image (rodata/data gap) memory: 1012K
<6>[ 21.347927] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 21.348079] Run /sbin/init as init process
<7>[ 21.348083] with arguments:
<7>[ 21.348085] /sbin/init
<7>[ 21.348086] with environment:
<7>[ 21.348087] HOME=/
<7>[ 21.348087] TERM=linux
<7>[ 21.348088] BOOT_IMAGE=/boot/drm_intel
<7>[ 21.396000] systemd[1]: Inserted module 'autofs4'
<7>[ 21.419063] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 21.419154] systemd[1]: Detected architecture x86-64.
<7>[ 21.420834] systemd[1]: Hostname set to <shard-lnl-2>.
<7>[ 21.600920] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 21.601492] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 21.662264] systemd[1]: Queued start job for default target graphical.target.
<7>[ 21.694079] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 21.697910] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 21.701518] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 21.702011] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 21.703189] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 21.703387] systemd[1]: Expecting device dev-disk-by\x2duuid-BB99\x2d8925.device - /dev/disk/by-uuid/BB99-8925...
<7>[ 21.703532] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 21.703671] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 21.703786] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 21.703902] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 21.704017] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 21.704429] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 21.705676] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 21.706079] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 21.706506] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 21.706825] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 21.707063] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 21.707390] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 21.707735] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 21.708029] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 21.708223] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 21.708523] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 21.708773] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 21.711949] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 21.714318] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 21.716795] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 21.719530] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 21.725473] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 21.728850] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 21.732118] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 21.735228] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 21.739557] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 21.742175] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 21.745505] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 21.751337] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 21.755409] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 21.757410] systemd-journald[210]: Collecting audit messages is disabled.
<7>[ 21.760553] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 21.766741] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 21.768053] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 21.772502] pstore: Using crash dump compression: deflate
<7>[ 21.773136] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 21.775721] pstore: Registered efi_pstore as persistent store backend
<6>[ 21.777807] fuse: init (API version 7.41)
<7>[ 21.779201] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 21.780237] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 21.780314] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 21.784191] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 21.790281] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 21.936942] EXT4-fs (nvme0n1p2): re-mounted 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f r/w. Quota mode: none.
<6>[ 21.969229] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:400424960k SS
<7>[ 21.988948] systemd-journald[210]: Received client request to flush runtime journal.
<7>[ 22.005653] systemd-journald[210]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 22.005665] systemd-journald[210]: Rotating system journal.
<4>[ 22.700972] nvme nvme0: using unchecked data buffer
<6>[ 22.850143] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 22.879130] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<6>[ 22.880826] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 22.890224] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 22.904335] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 22.921611] Consider using thermal netlink events interface
<3>[ 22.963630] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 22.970397] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 23.010423] pci 0000:00:05.0: Setting to D3hot
<6>[ 23.022118] pci 0000:00:0b.0: Setting to D3hot
<4>[ 23.034144] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 23.034361] intel_pmc_core INT33A1:00: initialized
<5>[ 23.046174] audit: type=1400 audit(1734702397.347:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=451 comm="apparmor_parser"
<5>[ 23.046663] audit: type=1400 audit(1734702397.348:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=452 comm="apparmor_parser"
<5>[ 23.047030] audit: type=1400 audit(1734702397.348:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=453 comm="apparmor_parser"
<5>[ 23.055317] audit: type=1400 audit(1734702397.357:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=456 comm="apparmor_parser"
<5>[ 23.055621] audit: type=1400 audit(1734702397.357:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=460 comm="apparmor_parser"
<5>[ 23.057672] audit: type=1400 audit(1734702397.358:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=455 comm="apparmor_parser"
<5>[ 23.057688] audit: type=1400 audit(1734702397.358:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=457 comm="apparmor_parser"
<5>[ 23.057726] audit: type=1400 audit(1734702397.359:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=461 comm="apparmor_parser"
<5>[ 23.057970] audit: type=1400 audit(1734702397.359:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=458 comm="apparmor_parser"
<5>[ 23.061951] audit: type=1400 audit(1734702397.363:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=462 comm="apparmor_parser"
<6>[ 23.394921] ACPI: bus type thunderbolt registered
<6>[ 23.430310] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 23.431805] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 23.431812] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 23.431942] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 23.435563] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 23.445500] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 23.451276] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 23.451286] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 23.470500] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 23.498850] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 23.524799] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 23.534242] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 23.585259] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 23.592845] intel_rapl_common: Found RAPL domain package
<6>[ 23.592964] intel_rapl_common: Found RAPL domain dram
<6>[ 23.634311] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 23.660568] smsc75xx v1.0.0
<6>[ 23.665396] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 23.674394] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 23.674402] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 23.674404] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 23.674406] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 23.674407] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 23.725442] cryptd: max_cpu_qlen set to 1000
<6>[ 23.758972] AES CTR mode by8 optimization enabled
<6>[ 23.771636] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:34:08
<6>[ 23.771647] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
<6>[ 23.772404] e1000e 0000:00:1f.6 eth0: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 23.800787] smsc75xx 3-4:1.0 eth1: register 'smsc75xx' at usb-0000:00:14.0-4, smsc75xx USB 2.0 Gigabit Ethernet, 80:3f:5d:08:f2:ce
<6>[ 23.809571] usbcore: registered new interface driver smsc75xx
<4>[ 23.814873] block nvme0n1: No UUID available providing old NGUID
<6>[ 24.020410] evm: overlay not supported
<6>[ 24.136898] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 24.166297] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 24.166303] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 24.166306] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 24.320887] intel_rapl_common: Found RAPL domain package
<6>[ 24.320893] intel_rapl_common: Found RAPL domain core
<6>[ 24.321162] intel_rapl_common: Found RAPL domain dram
<6>[ 24.321166] intel_rapl_common: Found RAPL domain psys
<6>[ 24.397611] loop0: detected capacity change from 0 to 8
<5>[ 24.425597] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 24.425621] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 24.496935] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
<6>[ 24.550800] smsc75xx 3-4:1.0 enx803f5d08f2ce: renamed from eth1
<6>[ 25.173952] hid: raw HID events driver (C) Jiri Kosina
<6>[ 25.180334] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 25.217011] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.218374] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.219741] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.220493] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.221740] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.222340] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.228709] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.233055] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.237293] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.240253] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 25.243698] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.246323] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 25.857562] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 25.857586] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 26.796388] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 26.796414] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 27.385683] smsc75xx 3-4:1.0 enx803f5d08f2ce: link up, 1000Mbps, full-duplex, lpa 0xC1E1
<6>[ 27.390106] smsc75xx 3-4:1.0 enx803f5d08f2ce: link up, 1000Mbps, full-duplex, lpa 0xC1E1
<7>[ 32.596466] systemd-journald[210]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 50.319463] [IGT] xe_module_load: executing
<7>[ 50.324229] [IGT] xe_module_load: starting subtest load
<6>[ 50.489045] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 50.490558] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 50.490570] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 50.490675] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 50.490771] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 50.498352] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 50.502160] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 50.502260] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 50.502344] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 50.502414] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 50.502472] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 50.502529] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 50.502585] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 50.502640] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 50.502695] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 50.502749] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 50.502800] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 50.502849] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 50.502896] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 50.502945] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 50.502992] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.503094] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 50.504170] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 50.504254] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 50.509092] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000092 [0x49/00]
<7>[ 50.509203] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 50.511960] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.512736] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 50.512803] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 50.512877] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000fb
<7>[ 50.512929] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000000fb
<7>[ 50.512979] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 50.513026] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.513087] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 50.513766] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 50.517688] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 50.517761] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 50.517817] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 50.517871] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 50.517924] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 50.517975] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 50.518021] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 50.518082] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 50.518139] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 50.518194] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 50.518248] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 50.518301] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 50.518354] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 50.518394] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 50.519593] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 50.521603] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 50.522452] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 50.522531] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.522632] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 50.524082] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 50.524254] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 50.544363] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.544752] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 50.544908] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 50.545060] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 50.545189] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 50.545309] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 50.545425] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.545536] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 50.545805] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0
<7>[ 50.545992] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 50.546217] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 50.546372] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 50.546516] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 50.546656] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 50.546790] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 50.546951] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 50.547121] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 50.547291] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 50.547443] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 50.547591] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 50.547743] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 50.547887] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 50.548025] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 50.548174] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 50.548298] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 50.548416] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.548533] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.548647] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 50.548755] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.548860] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.548965] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.549073] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 50.549177] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.549275] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.549369] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.549463] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 50.549558] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.549650] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.549741] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.549831] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 50.549917] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.550004] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.550108] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.550203] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 50.550293] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.550380] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.550466] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.550552] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 50.550956] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 50.551067] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 50.551152] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 50.551237] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 50.551320] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 50.551398] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 50.551475] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 50.551549] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 50.551621] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 50.551708] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 50.551788] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 50.551863] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 50.551934] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 50.552004] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 50.552089] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 50.552157] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 50.552224] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 50.552290] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 50.552356] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 50.552421] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.552483] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.552548] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.552620] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 50.552692] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 50.552764] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.552827] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.552886] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.552946] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 50.553046] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.553175] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 50.553314] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.553465] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 50.553622] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 50.553734] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 50.553818] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 50.553906] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.554021] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 50.554126] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 50.554150] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 50.554265] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 50.554359] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 50.554435] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 50.554763] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 50.554908] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 50.556192] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 50.556293] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 50.556384] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 50.556469] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 50.556551] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 50.556629] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x578856c4 (EVT_HTP)
<7>[ 50.556713] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 50.556785] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 50.556856] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.556926] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 50.556994] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.557073] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 50.557160] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 50.557245] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 50.557328] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.557398] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 50.557466] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.557450] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 50.557535] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 50.557599] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 50.557659] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 50.557719] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.557781] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 50.557848] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.557912] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 50.559746] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 50.559888] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 50.560055] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 50.560153] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 50.560248] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 50.560339] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 50.560414] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 50.560484] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 50.564875] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 50.567220] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.567342] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 50.567455] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 50.567645] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 50.567829] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 50.568009] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 50.568136] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 50.568242] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 50.568848] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 50.568970] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 50.569089] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<6>[ 50.569190] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.24)
<7>[ 50.569249] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 50.569349] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 50.569448] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 50.570242] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 50.570372] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.570486] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.570587] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.570687] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.570785] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.570915] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.571453] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 50.572827] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 50.572980] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 50.574665] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 50.575239] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 50.576054] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85
<7>[ 50.577526] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 50.578032] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 50.580075] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 50.589388] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 50.589398] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.589400] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.589401] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 50.589404] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.589406] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 50.589411] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.589413] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 50.589415] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.589453] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.589455] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.589456] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.589464] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 50.589993] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 50.590541] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 50.590657] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 50.590798] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 50.590938] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 50.591110] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.591215] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.591314] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.591391] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.591464] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.591568] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.591733] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 50.591889] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.592009] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 50.592363] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 50.592476] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.592580] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 50.592768] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 50.592874] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.592980] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 50.593404] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 50.593519] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 50.593628] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 50.593703] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 50.593776] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 50.593847] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 50.593916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 50.593985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 50.594061] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 50.594144] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 50.594232] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 50.594317] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 50.594393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 50.594459] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 50.594525] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 50.594589] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 50.594653] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 50.594718] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 50.594785] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 50.594852] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 50.594917] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 50.595679] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 50.595782] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 50.595857] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 50.595926] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 50.595987] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.596053] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.596127] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.596206] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 50.596290] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 50.596361] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.596417] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.596473] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.596531] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 50.596596] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 50.596659] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.596721] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.596781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.596874] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 50.596948] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 50.597018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 50.597109] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 50.597271] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 50.597343] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 50.597404] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 50.597460] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 50.597514] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 50.597569] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 50.597626] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 50.597711] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 50.597775] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 50.597834] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 50.597892] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 50.597949] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 50.598006] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 50.598076] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 50.598188] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 50.598266] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 50.598339] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 50.598400] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 50.598456] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 50.598511] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 50.598564] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 50.598752] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 50.598848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 50.598940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 50.599018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 50.599118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 50.599215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 50.599309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 50.599393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 50.599467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 50.599537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 50.599604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 50.599671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 50.599737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 50.599804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 50.599871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, pipeline full: 0, guardband: 105 flipline: 1906, vmin vblank: 1802, vmax vblank: 1801
<7>[ 50.599938] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.600005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.600090] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.600173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.600256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.600336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 50.600399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 50.600462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 50.600527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 50.600598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 50.600663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 50.600728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 50.600790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 50.600851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.600912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.600972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.601031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.601112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.601188] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.601263] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.601336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.601398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.601461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.601528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 50.601595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 50.601808] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 50.601881] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.601950] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.602206] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 50.602311] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 50.617467] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 50.649114] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 50.832462] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 50.832465] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 50.832466] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 50.832543] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 50.832629] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 50.832706] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 50.832770] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 50.832850] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 50.832926] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 50.833012] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 50.833082] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 50.833139] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 50.833201] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 50.833953] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 50.834011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 50.834084] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 50.834143] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 50.834204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 50.834270] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 50.834329] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 50.834390] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 50.834448] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 50.834505] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 50.834562] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 50.834618] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 50.834672] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 50.834725] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 50.834778] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 50.834830] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 50.834881] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 50.834931] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 50.834984] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 50.835043] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 50.835095] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 50.835146] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 50.835199] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 50.835254] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 50.835306] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 50.835353] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 50.835406] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 50.835459] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 50.835510] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 50.835560] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 50.835610] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 50.835660] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 50.835712] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 50.835765] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 50.835817] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 50.835869] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 50.835924] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 50.835977] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 50.836209] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 50.836274] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 50.836339] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 50.836647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 50.836693] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 50.836740] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 50.836954] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 50.837008] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7>[ 50.837071] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 50.837121] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 50.837176] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 50.837232] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 50.837662] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 50.837721] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 50.837778] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 50.837832] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 50.837885] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 50.837937] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 50.837988] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 50.838047] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 50.838099] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 50.838154] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 50.838211] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 50.838266] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 50.838320] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 50.838374] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 50.838441] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 50.838569] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 50.840474] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 50.853502] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 50.854295] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 50.854371] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 50.859628] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 50.862128] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.862522] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 50.863303] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 50.863378] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 50.863446] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 50.863503] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 50.863564] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 50.863620] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 50.863674] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 50.863726] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 50.863779] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 50.866531] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 50.866597] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 50.866658] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 50.868465] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 50.872991] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 50.872995] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 50.872996] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 50.872997] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 50.872999] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 50.873000] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 50.873001] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 50.873002] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 50.873003] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 50.873004] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 50.873112] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 50.873249] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 50.873378] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 50.874096] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 50.874204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 50.874312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 50.874416] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 50.874518] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 50.874620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 50.874718] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 50.874819] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 50.874918] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 50.875017] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 50.875131] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 50.875224] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 50.875313] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 50.875399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 50.875484] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 50.875565] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 50.875645] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 50.875725] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 50.875805] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 50.875884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 50.875960] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 50.876043] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 50.876117] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 50.876191] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 50.876263] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 50.876335] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 50.876430] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 50.877122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 50.877235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 50.877591] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 50.877691] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 50.878267] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 50.878373] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 50.878473] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 50.878571] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 50.878666] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 50.878763] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 50.878874] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 50.878981] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 50.879082] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 50.879172] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 50.879255] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 50.879340] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 50.879424] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 50.879506] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 50.879610] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 50.879722] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 50.895640] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 50.896806] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 50.896943] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 50.916524] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.916933] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 50.917831] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 50.920350] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 50.922270] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 50.964604] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 50.966549] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 50.966866] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 50.967262] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 50.967592] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 50.967874] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 50.968291] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 50.968617] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 50.968930] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 50.969262] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 50.969872] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 50.970287] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 50.970577] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 50.971984] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 50.978790] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 50.983247] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 50.983821] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 50.985264] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 50.985329] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 50.985637] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 50.986188] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 50.986245] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 50.986573] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 50.987150] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 50.987196] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 50.987530] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 50.988073] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 50.988105] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 50.988132] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 50.995821] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 50.998494] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 50.999241] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 50.999364] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 51.000451] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 51.000554] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 51.000636] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 51.000707] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 51.000856] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.001029] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 51.001054] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 51.001687] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.002205] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.002323] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.002436] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.002653] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.002660] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.002662] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.002664] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.002667] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.002669] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.002674] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.002675] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.002679] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.002702] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 51.002825] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.003561] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.003716] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.004939] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 51.005327] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.005330] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.005332] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.005368] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 51.005383] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.005395] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 51.005406] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.005641] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.005770] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 51.005781] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 51.005791] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 51.005801] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.005941] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.006166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 51.006177] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 51.006186] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 51.006195] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.006331] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.006430] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 51.006438] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 51.006445] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 51.006449] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 51.006451] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 51.006453] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 51.006625] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.006641] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 51.006643] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 51.006646] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 51.006648] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 51.006657] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.006930] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.007353] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.007499] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.007611] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.007726] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 51.007760] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 51.014799] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d7a000
<6>[ 51.015857] fbcon: xedrmfb (fb0) is primary device
<7>[ 51.016766] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 51.016908] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 51.017025] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 51.017169] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 51.017285] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 51.017399] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 51.017509] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 51.017616] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 51.017720] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 51.017821] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 51.017907] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 51.017995] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 51.018099] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 51.018201] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.018301] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.018394] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 51.018477] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.018560] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.018642] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.018724] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 51.018803] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 51.018884] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 51.018964] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 51.019047] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.019141] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.019239] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 51.019336] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.019414] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.019489] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.019563] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 51.019635] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 51.019721] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 51.019805] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 51.019924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 51.020016] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 51.020125] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 51.020229] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 51.020320] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 51.020398] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.020472] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.020546] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.020619] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.020689] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.020758] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.020827] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.020894] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.020960] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.021025] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021107] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021182] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021255] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.021328] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021390] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021451] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021511] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.021570] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021628] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021690] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.021754] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 51.021857] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.021960] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.022066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.022172] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.022273] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.022391] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 51.022526] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 51.022626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.022722] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 51.022805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.022886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.022968] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.023056] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.023154] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 51.023250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.023344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.023442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.023524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 51.023604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 51.023683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 51.023761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 51.023839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 51.023914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 51.023989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 51.024074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 51.024162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 51.024251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1905, vmax: 2859, pipeline full: 0, guardband: 106 flipline: 1906, vmin vblank: 1800, vmax vblank: 2753
<7>[ 51.024336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.024420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.024503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.024585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.024655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.024725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.024791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.024857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.024925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.024988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.025062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 51.025149] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 51.025233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.025315] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.025398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.025475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.025540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.025604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.025668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.025730] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.025795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.025860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.025922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.025984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 51.026053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 51.026127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 51.026203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 51.026277] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 51.026357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 51.026434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 51.026501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 51.048591] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 51.070784] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 51.071299] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 51.094219] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 51.257721] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 51.258800] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 51.279827] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 51.279953] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 51.280090] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000003 PP_CONTROL: 0x00000060
<7>[ 51.280288] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.280467] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.332193] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.332476] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.352013] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 51.353117] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.353175] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 51.353945] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.353965] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 51.354432] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 51.354887] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.355270] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 51.355607] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 51.355932] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 51.356304] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.356621] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 51.356930] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 51.357295] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 51.357573] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.357848] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 51.358154] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 51.358464] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 51.358726] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.360107] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 51.360360] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining)
<7>[ 51.368493] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 51.368838] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 51.369123] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 51.369381] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.495027] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 51.857342] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 51.857765] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 51.858183] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 51.858524] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 51.894165] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 51.894573] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 51.894914] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 51.895261] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.009598] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.009598] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.009800] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.153285] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.155609] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 52.156113] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 52.159915] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 52.161256] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 52.162519] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 52.163731] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 52.164955] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 52.166419] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 52.166805] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 52.168641] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 52.169012] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 52.169959] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 52.170576] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 52.170979] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 52.171469] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 52.173550] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 52.173570] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 52.173885] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 52.187354] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 52.190188] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.190669] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 52.192214] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 52.195128] Console: switching to colour frame buffer device 180x56
<6>[ 52.210776] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 52.226232] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 52.226565] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 52.226627] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.226620] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 52.226931] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 52.227239] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 52.227502] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.227492] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 52.227546] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.227730] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 52.227942] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 52.228167] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 52.228398] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 52.228672] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 52.228946] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 52.229241] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 52.229255] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.229561] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 52.229818] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 52.230073] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 52.230249] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.230308] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 52.230571] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 52.230616] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.230825] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 52.230970] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.231096] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 52.231328] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 52.231518] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 52.231746] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.231762] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.231768] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.231772] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.231781] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.231786] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.231802] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.231807] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.231815] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.231717] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 52.231852] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.231943] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 52.232157] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.232215] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 52.232557] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 52.232981] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 52.233348] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 52.234551] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.234899] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 52.235052] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 52.237378] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.237388] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.237393] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.237516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.237567] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.237606] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.237641] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.238127] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.238530] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.238655] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 52.238879] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 52.240831] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.241305] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.241347] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.241383] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.241817] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.242189] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.242228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.242260] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.242651] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.242944] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.242989] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.243008] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.243021] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.243034] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.245434] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.245485] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 52.245497] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 52.245509] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 52.245519] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 52.245576] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.250305] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 52.250677] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 52.254829] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 52.294604] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 52.297032] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [xe])
<7>[ 52.297299] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 52.297734] xe 0000:00:02.0: [drm:i915_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 52.304915] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 52.305057] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 52.305138] [IGT] xe_module_load: exiting, ret=0
<7>[ 52.337104] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 52.337229] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 52.337969] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.338099] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.338193] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.338280] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.338364] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.338450] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.338535] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.338618] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.338701] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.338785] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.338867] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.338949] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.339030] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.339126] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.339211] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.339293] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.339371] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.339451] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.339529] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.339608] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.339686] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.339764] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.339842] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.339920] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.339998] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.340085] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.340165] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.340242] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.340321] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.340399] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.340477] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.340554] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.340633] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.340712] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.340789] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.340865] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.345476] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.345616] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.345710] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 52.348781] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 52.350900] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 52.352191] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 52.352694] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 53.290665] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.290793] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.290926] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.505948] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 54.763907] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 54.764418] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067