<5>[ 0.000000] Linux version 6.13.0-rc3-xe+ (builder@lgci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Dec 17 05:19:07 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cb59fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cb5a000-0x000000006fed2fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fed3000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<5>[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cc32000 MEMATTR=0x690a8018 ESRT=0x690c5098 MOKvar=0x6cd66000
<6>[ 0.000000] efi: Remove mem267: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem269: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D84.2410171025 10/17/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000366] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000367] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004221] esrt: Reserving ESRT space from 0x00000000690c5098 to 0x00000000690c51e8.
<7>[ 0.004229] e820: update [mem 0x690c5000-0x690c5fff] usable ==> reserved
<6>[ 0.004248] Using GB pages for direct mapping
<6>[ 0.004898] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.004899] printk: early log buf free: 258856(98%)
<6>[ 0.004899] Secure boot disabled
<6>[ 0.004901] ACPI: Early table checksum verification disabled
<6>[ 0.004904] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.004906] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004910] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.004913] ACPI: DSDT 0x000000006FFB7000 02523C (v02 INTEL LNL 00000002 01000013)
<6>[ 0.004915] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.004916] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.004918] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.004919] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.004920] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.004922] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.004923] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.004924] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.004926] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.004927] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.004928] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.004930] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.004931] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.004932] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.004934] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.004935] ACPI: SSDT 0x000000006FFDE000 008EEA (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.004936] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.004938] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.004939] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.004940] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.004941] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004943] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004944] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.004945] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004946] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.004948] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.004949] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.004950] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004952] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.004953] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.004954] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004955] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004957] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004958] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.004959] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.004961] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.004962] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004963] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004965] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.004966] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.004967] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.004969] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.004970] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.004971] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.004972] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.004974] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.004975] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004976] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.004977] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc23b]
<6>[ 0.004978] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.004978] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.004978] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.004979] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.004979] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.004979] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.004980] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.004980] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.004980] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.004980] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.004981] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.004981] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.004981] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.004982] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.004982] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.004982] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6ee9]
<6>[ 0.004983] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.004983] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.004983] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.004983] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.004984] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.004984] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.004984] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.004985] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.004985] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.004985] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.004986] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.004986] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.004986] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.004987] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.004987] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.004987] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.004987] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.004988] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.004988] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.004988] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.004989] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.004989] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.004989] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.004990] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.004990] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.004990] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.004991] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.004991] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.004991] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.004992] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.004992] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005053] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005240] No NUMA configuration found
<6>[ 0.005240] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005245] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<5>[ 5.072284] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
<6>[ 5.072318] Zone ranges:
<6>[ 5.072318] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 5.072319] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 5.072320] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 5.072321] Device empty
<6>[ 5.072321] Movable zone start for each node
<6>[ 5.072322] Early memory node ranges
<6>[ 5.072322] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 5.072323] node 0: [mem 0x0000000000100000-0x000000006cb59fff]
<6>[ 5.072323] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 5.072324] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 5.072325] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 5.072330] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 5.072347] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 5.074359] On node 0, zone DMA32: 13477 pages in unavailable ranges
<6>[ 5.102979] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 5.103045] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 5.103509] ACPI: PM-Timer IO Port: 0x1808
<6>[ 5.103515] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 5.103566] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 5.103567] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 5.103569] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 5.103571] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 5.103572] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 5.103583] e820: update [mem 0x69063000-0x6907dfff] usable ==> reserved
<6>[ 5.103589] TSC deadline timer available
<6>[ 5.103590] CPU topo: Max. logical packages: 1
<6>[ 5.103591] CPU topo: Max. logical dies: 1
<6>[ 5.103591] CPU topo: Max. dies per package: 1
<6>[ 5.103592] CPU topo: Max. threads per core: 1
<6>[ 5.103593] CPU topo: Num. cores per package: 8
<6>[ 5.103593] CPU topo: Num. threads per package: 8
<6>[ 5.103593] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 5.103606] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 5.103607] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 5.103608] PM: hibernation: Registered nosave memory: [mem 0x69063000-0x6907dfff]
<6>[ 5.103609] PM: hibernation: Registered nosave memory: [mem 0x690c5000-0x690c5fff]
<6>[ 5.103610] PM: hibernation: Registered nosave memory: [mem 0x6cb5a000-0x6fed2fff]
<6>[ 5.103610] PM: hibernation: Registered nosave memory: [mem 0x6fed3000-0x6ff4ffff]
<6>[ 5.103611] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 5.103611] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 5.103612] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 5.103612] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 5.103612] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 5.103613] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 5.103614] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 5.103615] Booting paravirtualized kernel on bare hardware
<6>[ 5.103617] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 5.103625] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 5.103958] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 5.103963] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 5.103965] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 5.103978] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<5>[ 5.104052] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 5.104066] random: crng init done
<6>[ 5.105891] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 5.106801] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 5.106857] Fallback order for Node 0: 0
<6>[ 5.106859] Built 1 zonelists, mobility grouping on. Total pages: 8285945
<6>[ 5.106860] Policy zone: Normal
<6>[ 5.106870] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 5.106870] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 5.106872] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 5.107803] software IO TLB: area num 8.
<4>[ 5.153211] **********************************************************
<4>[ 5.153212] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.153213] ** **
<4>[ 5.153213] ** This system shows unhashed kernel memory addresses **
<4>[ 5.153213] ** via the console, logs, and other interfaces. This **
<4>[ 5.153213] ** might reduce the security of your system. **
<4>[ 5.153213] ** **
<4>[ 5.153214] ** If you see this message and you are not debugging **
<4>[ 5.153214] ** the kernel, report this immediately to your system **
<4>[ 5.153214] ** administrator! **
<4>[ 5.153214] ** **
<4>[ 5.153214] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.153214] **********************************************************
<6>[ 5.154291] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 5.154613] ftrace: allocating 59309 entries in 232 pages
<6>[ 5.179860] ftrace: allocated 232 pages with 4 groups
<6>[ 5.181082] Dynamic Preempt: voluntary
<6>[ 5.181531] Running RCU self tests
<6>[ 5.181532] Running RCU synchronous self tests
<6>[ 5.181538] rcu: Preemptible hierarchical RCU implementation.
<6>[ 5.181539] rcu: RCU lockdep checking is enabled.
<6>[ 5.181539] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 5.181540] Trampoline variant of Tasks RCU enabled.
<6>[ 5.181540] Rude variant of Tasks RCU enabled.
<6>[ 5.181540] Tracing variant of Tasks RCU enabled.
<6>[ 5.181541] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 5.181541] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 5.181580] Running RCU synchronous self tests
<6>[ 5.181583] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.181586] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.181589] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.191491] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 5.191939] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 5.192271] Console: colour dummy device 80x25
<6>[ 5.192280] printk: legacy console [tty0] enabled
<6>[ 5.193477] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 5.193484] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 5.193488] ... MAX_LOCK_DEPTH: 48
<6>[ 5.193492] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 5.193495] ... CLASSHASH_SIZE: 4096
<6>[ 5.193499] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 5.193503] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 5.193506] ... CHAINHASH_SIZE: 262144
<6>[ 5.193510] memory used by lock dependency info: 54145 kB
<6>[ 5.193515] memory used for stack traces: 4224 kB
<6>[ 5.193519] per task-struct memory footprint: 1920 bytes
<6>[ 5.193567] ACPI: Core revision 20240827
<6>[ 5.194435] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 5.194498] APIC: Switch to symmetric I/O mode setup
<6>[ 5.194504] DMAR: Host address width 38
<6>[ 5.194508] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 5.194540] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.194572] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 5.194594] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.194619] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 5.194640] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 5.194675] DMAR: SATC flags: 0x1
<6>[ 5.194685] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 5.194690] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 5.194695] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 5.196373] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 5.200754] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 5.200774] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 5.200849] CPU0: Thermal monitoring enabled (TM1)
<6>[ 5.200855] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 5.201041] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 5.201046] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 5.201056] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 5.201064] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 5.201068] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 5.201075] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 5.201082] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 5.201097] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 5.201103] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 5.201108] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 5.201112] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 5.201118] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 5.201124] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 5.201129] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 5.201134] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 5.201139] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 5.201768] Freeing SMP alternatives memory: 48K
<6>[ 5.201768] pid_max: default: 32768 minimum: 301
<6>[ 5.201768] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 5.201768] landlock: Up and running.
<6>[ 5.201768] Yama: becoming mindful.
<6>[ 5.201768] AppArmor: AppArmor initialized
<6>[ 5.201768] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.201768] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.201768] Running RCU synchronous self tests
<6>[ 5.201768] Running RCU synchronous self tests
<6>[ 5.201768] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 5.201768] Running RCU Tasks wait API self tests
<6>[ 5.201768] Running RCU Tasks Rude wait API self tests
<6>[ 5.201768] Running RCU Tasks Trace wait API self tests
<6>[ 5.201768] Performance Events: XSAVE Architectural LBR, no PEBS fmt6+, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 5.201768] core: cpu_core PMU driver:
<6>[ 5.201768] ... version: 6
<6>[ 5.201768] ... bit width: 48
<6>[ 5.201768] ... generic registers: 10
<6>[ 5.201768] ... value mask: 0000ffffffffffff
<6>[ 5.201768] ... max period: 00007fffffffffff
<6>[ 5.201772] ... fixed-purpose events: 4
<6>[ 5.201775] ... event mask: 0001000f000003ff
<6>[ 5.201808] signal: max sigframe size: 3632
<6>[ 5.201832] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 5.201918] rcu: Hierarchical SRCU implementation.
<6>[ 5.201922] rcu: Max phase no-delay instances is 400.
<6>[ 5.202051] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 5.203761] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 5.204073] smp: Bringing up secondary CPUs ...
<6>[ 5.204418] smpboot: x86: Booting SMP configuration:
<6>[ 5.204424] .... node #0, CPUs: #1 #2 #3
<6>[ 5.207963] Callback from call_rcu_tasks_trace() invoked.
<4>[ 5.210883] #4 #5 #6 #7
<6>[ 0.009649] core: cpu_atom PMU driver:
<6>[ 0.009649] ... version: 6
<6>[ 0.009649] ... bit width: 48
<6>[ 0.009649] ... generic registers: 8
<6>[ 0.009649] ... value mask: 0000ffffffffffff
<6>[ 0.009649] ... max period: 00007fffffffffff
<6>[ 0.009649] ... fixed-purpose events: 6
<6>[ 0.009649] ... event mask: 00000077000000ff
<6>[ 5.219819] smp: Brought up 1 node, 8 CPUs
<6>[ 5.219868] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 5.221951] Memory: 32346024K/33143780K available (24576K kernel code, 5584K rwdata, 9228K rodata, 5612K init, 68412K bss, 775236K reserved, 0K cma-reserved)
<6>[ 5.224033] devtmpfs: initialized
<6>[ 5.224033] x86/mm: Memory block size: 128MB
<6>[ 5.239967] ACPI: PM: Registering ACPI NVS region [mem 0x6fed3000-0x6ff4ffff] (512000 bytes)
<6>[ 5.240177] Running RCU synchronous self tests
<6>[ 5.240190] Running RCU synchronous self tests
<6>[ 5.240205] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 5.240205] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 5.241052] pinctrl core: initialized pinctrl subsystem
<6>[ 5.241549] PM: RTC time: 12:54:41, date: 2024-12-17
<6>[ 5.242456] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 5.243374] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 5.243666] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 5.243942] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 5.243999] audit: initializing netlink subsys (disabled)
<5>[ 5.244063] audit: type=2000 audit(1734440081.043:1): state=initialized audit_enabled=0 res=1
<6>[ 5.245102] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 5.245103] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 5.245110] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 5.245114] thermal_sys: Registered thermal governor 'user_space'
<6>[ 5.245119] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 5.245163] EISA bus registered
<6>[ 5.245191] cpuidle: using governor ladder
<6>[ 5.245191] cpuidle: using governor menu
<6>[ 5.245191] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 5.245952] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 5.245979] PCI: Using configuration type 1 for base access
<6>[ 5.246129] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 5.247817] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 5.247823] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 5.247828] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 5.247832] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 5.267769] raid6: avx2x4 gen() 77348 MB/s
<6>[ 5.284769] raid6: avx2x2 gen() 84074 MB/s
<6>[ 5.301770] raid6: avx2x1 gen() 77030 MB/s
<6>[ 5.301774] raid6: using algorithm avx2x2 gen() 84074 MB/s
<6>[ 5.318770] raid6: .... xor() 57453 MB/s, rmw enabled
<6>[ 5.318774] raid6: using avx2x2 recovery algorithm
<6>[ 5.322021] fbcon: Taking over console
<6>[ 5.323309] ACPI: Added _OSI(Module Device)
<6>[ 5.323363] ACPI: Added _OSI(Processor Device)
<6>[ 5.323407] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 5.323451] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 5.900432] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 5.914145] ACPI: EC: EC started
<6>[ 5.914158] ACPI: EC: interrupt blocked
<6>[ 5.916517] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 5.916522] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 5.962811] Callback from call_rcu_tasks() invoked.
<6>[ 6.190618] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.190627] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.218150] ACPI: Interpreter enabled
<6>[ 6.218241] ACPI: PM: (supports S0 S4 S5)
<6>[ 6.218245] ACPI: Using IOAPIC for interrupt routing
<6>[ 6.223437] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 6.223444] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 6.256147] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 6.256214] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 6.356330] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 6.357076] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 6.365330] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 6.639867] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 6.653058] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 6.794291] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 6.796138] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 6.804569] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 6.813558] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 6.813810] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 6.814057] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 6.910705] ACPI: \: Can't tag data node
<3>[ 6.912132] ACPI: \: Can't tag data node
<3>[ 6.913287] ACPI: \: Can't tag data node
<3>[ 6.914332] ACPI: \: Can't tag data node
<3>[ 6.915462] ACPI: \: Can't tag data node
<6>[ 7.104398] ACPI: \_TZ_.FN00: New power resource
<6>[ 7.105316] ACPI: \_TZ_.FN01: New power resource
<6>[ 7.107745] ACPI: \_TZ_.FN02: New power resource
<6>[ 7.108304] ACPI: \_TZ_.FN03: New power resource
<6>[ 7.108818] ACPI: \_TZ_.FN04: New power resource
<6>[ 7.110163] ACPI: \PIN_: New power resource
<6>[ 7.113632] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 7.113648] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 7.115513] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 7.119209] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 7.128745] PCI host bridge to bus 0000:00
<6>[ 7.129140] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 7.129148] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 7.129154] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 7.129162] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 7.129169] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 7.129177] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 7.132104] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 7.132682] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 7.132736] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 7.132798] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 7.132848] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 7.133022] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 7.134240] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 7.134257] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 7.135431] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 7.135448] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 7.135465] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 7.136287] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 7.136341] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.136353] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 7.136372] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 7.136501] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 7.136559] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 7.141117] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 7.141168] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.141180] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 7.141198] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 7.141331] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 7.141380] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 7.147320] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 7.147383] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.147401] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 7.147422] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 7.147588] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 7.147654] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 7.156898] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 7.156926] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 7.156958] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 7.157266] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 7.157288] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 7.157307] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 7.158382] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.158414] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 7.158520] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 7.161244] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.161277] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 7.161299] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 7.161392] pci 0000:00:0d.2: supports D1 D2
<6>[ 7.161399] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.163822] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.163856] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 7.163877] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 7.163968] pci 0000:00:0d.3: supports D1 D2
<6>[ 7.163975] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.166220] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 7.166250] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 7.166346] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 7.170475] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.170522] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 7.170667] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 7.170667] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.170667] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 7.170667] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 7.173430] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 7.173461] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 7.173482] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 7.174199] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.174264] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.176509] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.176572] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.188046] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.188108] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.189730] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.189863] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.191740] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.191788] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 7.191969] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 7.194643] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 7.194673] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 7.194690] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 7.194990] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 7.195027] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.195035] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 7.195042] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 7.195166] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 7.195223] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 7.199729] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 7.199841] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.199872] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 7.200213] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 7.200374] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 7.211305] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 7.215140] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 7.215248] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 7.215373] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 7.215632] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 7.217250] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 7.217250] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 7.217250] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 7.220171] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.220250] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 7.220876] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 7.220943] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 7.221221] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 7.224608] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 7.224665] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 7.224703] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 7.224741] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 7.225534] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.226102] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.226452] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.226823] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 7.226867] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 7.226916] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 7.226952] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 7.227217] pci 0000:7f:00.0: supports D1 D2
<6>[ 7.227226] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.228319] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.230920] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.231591] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 7.231646] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 7.232981] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.233107] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.664244] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 18.001422] Low-power S0 idle used by default for system suspend
<6>[ 18.054208] ACPI: EC: interrupt unblocked
<6>[ 18.054219] ACPI: EC: event unblocked
<6>[ 18.054253] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 18.054259] ACPI: EC: GPE=0x6e
<6>[ 18.054265] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 18.054274] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 18.055141] iommu: Default domain type: Translated
<6>[ 18.055141] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 18.059690] SCSI subsystem initialized
<7>[ 18.060941] libata version 3.00 loaded.
<6>[ 18.061175] ACPI: bus type USB registered
<6>[ 18.061360] usbcore: registered new interface driver usbfs
<6>[ 18.061452] usbcore: registered new interface driver hub
<6>[ 18.061561] usbcore: registered new device driver usb
<6>[ 18.061888] pps_core: LinuxPPS API ver. 1 registered
<6>[ 18.061900] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 18.061950] PTP clock support registered
<6>[ 18.062822] EDAC MC: Ver: 3.0.0
<6>[ 18.066843] efivars: Registered efivars operations
<6>[ 18.074905] NetLabel: Initializing
<6>[ 18.074916] NetLabel: domain hash size = 128
<6>[ 18.074925] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 18.075084] NetLabel: unlabeled traffic allowed by default
<6>[ 18.075120] mctp: management component transport protocol core
<6>[ 18.075133] NET: Registered PF_MCTP protocol family
<6>[ 18.075215] PCI: Using ACPI for IRQ routing
<7>[ 18.109702] PCI: pci_cache_line_size set to 64 bytes
<6>[ 18.110026] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 18.110219] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 18.110241] e820: reserve RAM buffer [mem 0x69063000-0x6bffffff]
<7>[ 18.110249] e820: reserve RAM buffer [mem 0x690c5000-0x6bffffff]
<7>[ 18.110255] e820: reserve RAM buffer [mem 0x6cb5a000-0x6fffffff]
<7>[ 18.110262] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 18.111824] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 18.111846] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 18.111856] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 18.111887] vgaarb: loaded
<6>[ 18.112907] clocksource: Switched to clocksource tsc-early
<5>[ 18.123580] VFS: Disk quotas dquot_6.6.0
<6>[ 18.123637] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 18.125745] AppArmor: AppArmor Filesystem Enabled
<6>[ 18.126150] pnp: PnP ACPI init
<6>[ 18.128216] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 18.128242] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 18.131726] system 00:02: [io 0x06a4] has been reserved
<6>[ 18.131750] system 00:02: [io 0x06a0] has been reserved
<6>[ 18.180629] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 18.180669] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 18.180698] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 18.180719] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 18.180740] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 18.180764] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 18.180788] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 18.180809] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 18.188732] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 18.195437] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 18.195848] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 18.206969] pnp: PnP ACPI: found 8 devices
<6>[ 18.233718] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 18.234298] NET: Registered PF_INET protocol family
<6>[ 18.234613] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 18.240858] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 18.241262] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 18.241605] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 18.242900] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 18.246103] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 18.246831] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 18.248363] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 18.250056] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 18.250190] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 18.250218] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 18.250241] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 18.250333] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 18.250350] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 18.250366] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 18.250383] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 18.250503] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 18.250589] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 18.250708] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 18.250795] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 18.250865] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 18.250884] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 18.250905] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 18.250924] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 18.250955] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 18.250970] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 18.250991] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 18.251010] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 18.251042] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 18.251057] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 18.251078] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 18.251096] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 18.251125] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 18.251139] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 18.251158] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 18.251186] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 18.251233] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 18.251295] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 18.251310] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 18.251324] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 18.251339] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 18.251354] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 18.251370] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 18.251383] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 18.251397] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 18.251414] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 18.251426] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 18.251440] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 18.251457] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 18.251469] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 18.251483] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 18.251500] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 18.251513] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 18.251527] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 18.253874] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 18.257356] PCI: CLS 0 bytes, default 64
<6>[ 18.257515] DMAR: Intel-IOMMU force enabled due to platform opt in
<6>[ 18.257617] DMAR: No RMRR found
<6>[ 18.257643] DMAR: No ATSR found
<6>[ 18.257663] DMAR: IOMMU feature nwfs inconsistent
<6>[ 18.257668] DMAR: IOMMU feature dit inconsistent
<6>[ 18.257686] DMAR: IOMMU feature sc_support inconsistent
<6>[ 18.257699] DMAR: IOMMU feature dev_iotlb_support inconsistent
<6>[ 18.257713] DMAR: dmar1: Using Queued invalidation
<6>[ 18.257776] DMAR: dmar0: Using Queued invalidation
<6>[ 18.257802] DMAR: dmar2: Using Queued invalidation
<6>[ 18.259677] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 18.259851] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 18.260007] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 18.260140] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 18.263524] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 18.265829] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 18.265972] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 18.266108] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 18.266243] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 18.266432] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 18.266529] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 18.266621] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 18.266785] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 18.266923] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 18.267085] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 18.267175] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 18.267381] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 18.267473] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 18.267563] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 18.267655] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 18.267806] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 18.267899] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 18.268013] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 18.268152] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 18.268414] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 18.268522] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 18.268637] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 18.268753] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 18.268855] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 18.268958] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 18.269078] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 18.269234] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 18.270412] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 18.270430] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 18.270445] software IO TLB: mapped [mem 0x0000000063b5b000-0x0000000067b5b000] (64MB)
<6>[ 18.276283] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 18.276473] clocksource: Switched to clocksource tsc
<6>[ 18.276702] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 18.285092] Initialise system trusted keyrings
<5>[ 18.285206] Key type blacklist registered
<6>[ 18.286118] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 18.300832] zbud: loaded
<6>[ 18.303275] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 18.303445] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 18.303456] ntfs3: Read-only LZX/Xpress compression included
<5>[ 18.304068] integrity: Platform Keyring initialized
<5>[ 18.304104] integrity: Machine keyring initialized
<6>[ 18.314795] xor: automatically using best checksumming function avx
<5>[ 18.314810] Key type asymmetric registered
<5>[ 18.314828] Asymmetric key parser 'x509' registered
<6>[ 18.314997] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 18.316121] io scheduler mq-deadline registered
<6>[ 18.317896] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 18.320052] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 18.322037] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 18.323886] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 18.325578] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 18.327493] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 18.328289] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 18.332464] Monitor-Mwait will be used to enter C-1 state
<7>[ 18.332592] Monitor-Mwait will be used to enter C-2 state
<7>[ 18.332641] Monitor-Mwait will be used to enter C-3 state
<6>[ 18.339099] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 18.339391] ACPI: button: Lid Switch [LID0]
<6>[ 18.339844] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 18.340123] ACPI: button: Sleep Button [SLPB]
<6>[ 18.340463] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 18.341070] ACPI: button: Power Button [PWRB]
<6>[ 18.520160] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 18.520180] ACPI: thermal: Thermal Zone [TZ00] (72 C)
<6>[ 18.522352] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 18.522396] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 18.525015] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 18.547830] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 18.580207] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 18.583155] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 18.607906] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 18.612036] hpet_acpi_add: no address or irqs in _CRS
<6>[ 18.612248] Linux agpgart interface v0.103
<6>[ 18.613057] ACPI: bus type drm_connector registered
<6>[ 18.643588] loop: module loaded
<6>[ 18.715734] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 18.859735] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 18.980924] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 19.091080] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 19.252046] Key type psk registered
<6>[ 19.254469] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 19.255104] nvme nvme0: pci function 0000:80:00.0
<6>[ 19.255351] tun: Universal TUN/TAP device driver, 1.6
<6>[ 19.256132] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 19.256241] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 19.257494] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 19.259299] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 19.259330] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 19.259350] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 19.260209] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
<6>[ 19.260232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.260243] usb usb1: Product: xHCI Host Controller
<6>[ 19.260251] usb usb1: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 19.260260] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 19.261265] hub 1-0:1.0: USB hub found
<6>[ 19.261353] hub 1-0:1.0: 1 port detected
<6>[ 19.266661] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
<6>[ 19.266679] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.266690] usb usb2: Product: xHCI Host Controller
<6>[ 19.266697] usb usb2: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 19.266706] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 19.267401] hub 2-0:1.0: USB hub found
<6>[ 19.267454] hub 2-0:1.0: 3 ports detected
<6>[ 19.288972] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 19.291864] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 19.291903] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 19.293134] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 19.294842] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 19.294866] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 19.294892] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 19.295156] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
<6>[ 19.295171] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.295181] usb usb3: Product: xHCI Host Controller
<6>[ 19.295189] usb usb3: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 19.295197] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 19.295934] hub 3-0:1.0: USB hub found
<6>[ 19.295987] hub 3-0:1.0: 8 ports detected
<6>[ 19.297594] nvme0n1: p1 p2
<6>[ 19.325256] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
<6>[ 19.325275] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 19.325285] usb usb4: Product: xHCI Host Controller
<6>[ 19.325293] usb usb4: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 19.325301] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 19.325904] hub 4-0:1.0: USB hub found
<6>[ 19.325944] hub 4-0:1.0: 2 ports detected
<6>[ 19.333151] usbcore: registered new interface driver usb-storage
<6>[ 19.333296] usbcore: registered new interface driver usbserial_generic
<6>[ 19.333391] usbserial: USB Serial support registered for generic
<6>[ 19.333447] usbcore: registered new interface driver ftdi_sio
<6>[ 19.333483] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 19.333534] usbcore: registered new interface driver pl2303
<6>[ 19.333568] usbserial: USB Serial support registered for pl2303
<6>[ 19.334386] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 19.334396] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 20.043194] i8042: Can't read CTR while initializing i8042
<3>[ 20.043204] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 20.043753] mousedev: PS/2 mouse device common for all mice
<6>[ 20.044774] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 20.046707] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 20.046926] rtc_cmos rtc_cmos: setting system clock to 2024-12-17T12:54:56 UTC (1734440096)
<6>[ 20.047106] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 20.047165] i2c_dev: i2c /dev entries driver
<6>[ 20.053921] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 20.053937] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 20.053948] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 20.053985] device-mapper: uevent: version 1.0.3
<6>[ 20.054346] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 20.054486] platform eisa.0: Probing EISA bus 0
<4>[ 20.054499] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 20.054514] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 20.054526] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 20.054538] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 20.054550] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 20.054562] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 20.054574] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 20.054586] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 20.054598] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 20.054607] platform eisa.0: EISA: Detected 0 cards
<6>[ 20.054617] intel_pstate: Intel P-state driver initializing
<6>[ 20.058310] Hybrid CPU capacity scaling enabled
<6>[ 20.059810] intel_pstate: HWP enabled
<6>[ 20.059818] sdhci: Secure Digital Host Controller Interface driver
<6>[ 20.059826] sdhci: Copyright(c) Pierre Ossman
<6>[ 20.059978] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 20.062998] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 20.064020] drop_monitor: Initializing network drop monitor service
<6>[ 20.064306] NET: Registered PF_INET6 protocol family
<6>[ 20.067679] Segment Routing with IPv6
<6>[ 20.067733] In-situ OAM (IOAM) with IPv6
<6>[ 20.067788] NET: Registered PF_PACKET protocol family
<5>[ 20.068011] Key type dns_resolver registered
<4>[ 20.071757] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 20.072196] microcode: Current revision: 0x00000116
<6>[ 20.072950] IPI shorthand broadcast: enabled
<6>[ 20.089730] sched_clock: Marking stable (20081000644, 8649115)->(20167941905, -78292146)
<6>[ 20.090504] registered taskstats version 1
<5>[ 20.092105] Loading compiled-in X.509 certificates
<6>[ 20.119131] Demotion targets for Node 0: null
<6>[ 20.119357] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946)
<6>[ 20.119360] kmemleak: Automatic memory scanning thread started
<4>[ 20.119367] ------------[ cut here ]------------
<4>[ 20.119375] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
<4>[ 20.119391] WARNING: CPU: 2 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x51/0x80
<4>[ 20.119402] Modules linked in:
<4>[ 20.119406] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc3-xe+ #1
<4>[ 20.119414] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D84.2410171025 10/17/2024
<4>[ 20.119423] RIP: 0010:check_early_ioremap_leak+0x51/0x80
<4>[ 20.119429] Code: 48 83 c3 01 48 83 fb 08 75 e1 85 c0 75 0e 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 89 c6 48 c7 c7 60 7f ea 82 e8 af c0 96 fd <0f> 0b b8 01 00 00 00 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 48
<4>[ 20.119442] RSP: 0000:ffffc900000f7dc0 EFLAGS: 00010246
<4>[ 20.119448] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
<4>[ 20.119454] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
<4>[ 20.119459] RBP: ffffc900000f7dd0 R08: 0000000000000000 R09: 0000000000000000
<4>[ 20.119465] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[ 20.119471] R13: ffffffff83ad08f0 R14: ffffc900000f7de0 R15: 000000000003824c
<4>[ 20.119477] FS: 0000000000000000(0000) GS:ffff88885f300000(0000) knlGS:0000000000000000
<4>[ 20.119483] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 20.119489] CR2: 0000000000000000 CR3: 0000000003248001 CR4: 0000000000f70ef0
<4>[ 20.119494] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 20.119500] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
<4>[ 20.119506] PKRU: 55555554
<4>[ 20.119509] Call Trace:
<4>[ 20.119512] <TASK>
<4>[ 20.119515] ? show_regs+0x6c/0x80
<4>[ 20.119522] ? __warn+0x93/0x1c0
<4>[ 20.119527] ? check_early_ioremap_leak+0x51/0x80
<4>[ 20.119532] ? report_bug+0x182/0x1b0
<4>[ 20.119539] ? handle_bug+0x6e/0xb0
<4>[ 20.119543] ? exc_invalid_op+0x18/0x80
<4>[ 20.119548] ? asm_exc_invalid_op+0x1b/0x20
<4>[ 20.119556] ? check_early_ioremap_leak+0x51/0x80
<4>[ 20.119561] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 20.119566] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 20.119571] do_one_initcall+0x76/0x400
<4>[ 20.119578] kernel_init_freeable+0x3da/0x6a0
<4>[ 20.119585] ? __pfx_kernel_init+0x10/0x10
<4>[ 20.119591] kernel_init+0x1b/0x200
<4>[ 20.119595] ret_from_fork+0x44/0x70
<4>[ 20.119600] ? __pfx_kernel_init+0x10/0x10
<4>[ 20.119605] ret_from_fork_asm+0x1a/0x30
<4>[ 20.119613] </TASK>
<4>[ 20.119616] irq event stamp: 82793531
<4>[ 20.119619] hardirqs last enabled at (82793539): [<ffffffff812a5a49>] __up_console_sem+0x79/0xa0
<4>[ 20.119628] hardirqs last disabled at (82793546): [<ffffffff812a5a2e>] __up_console_sem+0x5e/0xa0
<4>[ 20.119635] softirqs last enabled at (82792094): [<ffffffff811d54cf>] __irq_exit_rcu+0x13f/0x160
<4>[ 20.119642] softirqs last disabled at (82792073): [<ffffffff811d54cf>] __irq_exit_rcu+0x13f/0x160
<4>[ 20.119648] ---[ end trace 0000000000000000 ]---
<5>[ 20.119871] Key type .fscrypt registered
<5>[ 20.119876] Key type fscrypt-provisioning registered
<6>[ 20.122441] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 20.124739] Key type encrypted registered
<6>[ 20.124751] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 20.125056] ima: No TPM chip found, activating TPM-bypass!
<5>[ 20.125083] Loading compiled-in module X.509 certificates
<5>[ 20.125819] Loaded X.509 cert 'Build time autogenerated kernel key: b91506873b93a8693c5a7233571b4af65392b04f'
<6>[ 20.125833] ima: Allocated hash algorithm: sha256
<6>[ 20.125878] ima: No architecture policies found
<6>[ 20.125980] evm: Initialising EVM extended attributes:
<6>[ 20.125985] evm: security.selinux
<6>[ 20.125988] evm: security.SMACK64
<6>[ 20.125990] evm: security.SMACK64EXEC
<6>[ 20.125993] evm: security.SMACK64TRANSMUTE
<6>[ 20.125997] evm: security.SMACK64MMAP
<6>[ 20.125999] evm: security.apparmor
<6>[ 20.126002] evm: security.ima
<6>[ 20.126005] evm: security.capability
<6>[ 20.126008] evm: HMAC attrs: 0x1
<6>[ 20.127854] PM: Magic number: 4:478:936
<6>[ 20.128071] printk: legacy console [netcon0] enabled
<6>[ 20.128079] netconsole: network logging started
<6>[ 20.128636] RAS: Correctable Errors collector initialized.
<6>[ 20.128778] clk: Disabling unused clocks
<6>[ 20.128789] PM: genpd: Disabling unused power domains
<6>[ 20.129571] md: Waiting for all devices to be available before autodetect
<6>[ 20.129579] md: If you don't use raid, use raid=noautodetect
<6>[ 20.129584] md: Autodetecting RAID arrays.
<6>[ 20.129593] md: autorun ...
<6>[ 20.129597] md: ... autorun DONE.
<6>[ 20.178242] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none.
<6>[ 20.178308] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 20.179096] devtmpfs: mounted
<6>[ 20.191625] Freeing unused decrypted memory: 2028K
<6>[ 20.192432] Freeing unused kernel image (initmem) memory: 5612K
<6>[ 20.192456] Write protecting the kernel read-only data: 34816k
<6>[ 20.193126] Freeing unused kernel image (rodata/data gap) memory: 1012K
<6>[ 20.198464] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 20.198490] Run /sbin/init as init process
<7>[ 20.198494] with arguments:
<7>[ 20.198495] /sbin/init
<7>[ 20.198496] with environment:
<7>[ 20.198497] HOME=/
<7>[ 20.198497] TERM=linux
<7>[ 20.198498] BOOT_IMAGE=/boot/drm_intel
<7>[ 20.246300] systemd[1]: Inserted module 'autofs4'
<7>[ 20.267664] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 20.267761] systemd[1]: Detected architecture x86-64.
<7>[ 20.269501] systemd[1]: Hostname set to <shard-lnl-8>.
<7>[ 20.451109] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 20.451678] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 20.511367] systemd[1]: Queued start job for default target graphical.target.
<7>[ 20.537283] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 20.540219] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 20.543128] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 20.543754] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 20.545112] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 20.545337] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8...
<7>[ 20.545496] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 20.545644] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 20.545781] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 20.545902] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 20.546027] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 20.546455] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 20.547732] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 20.548167] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 20.548602] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 20.549050] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 20.549298] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 20.549645] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 20.550012] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 20.550323] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 20.550517] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 20.550824] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 20.551085] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 20.564161] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 20.567866] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 20.570739] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 20.573440] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 20.578484] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 20.581240] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 20.584368] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 20.588726] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 20.591474] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 20.594450] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 20.597412] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 20.600956] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 20.602988] systemd-journald[205]: Collecting audit messages is disabled.
<7>[ 20.606143] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 20.629615] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 20.634372] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 20.634543] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 20.639336] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 20.645517] pstore: Using crash dump compression: deflate
<7>[ 20.647608] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<6>[ 20.647608] pstore: Registered efi_pstore as persistent store backend
<7>[ 20.647728] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 20.647808] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 20.648673] fuse: init (API version 7.41)
<7>[ 20.652219] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 20.657346] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 20.799276] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. Quota mode: none.
<6>[ 20.836626] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:274595840k SS
<7>[ 20.849450] systemd-journald[205]: Received client request to flush runtime journal.
<7>[ 20.868639] systemd-journald[205]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 20.868665] systemd-journald[205]: Rotating system journal.
<4>[ 21.540545] nvme nvme0: using unchecked data buffer
<6>[ 21.677877] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 21.740074] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<6>[ 21.766570] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 21.766572] Consider using thermal netlink events interface
<6>[ 21.784183] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 21.785944] pci 0000:00:05.0: Setting to D3hot
<6>[ 21.797703] pci 0000:00:0b.0: Setting to D3hot
<6>[ 21.807574] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 21.810717] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 21.810966] intel_pmc_core INT33A1:00: initialized
<5>[ 21.859095] audit: type=1400 audit(1734440098.310:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=418 comm="apparmor_parser"
<5>[ 21.860098] audit: type=1400 audit(1734440098.310:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=419 comm="apparmor_parser"
<5>[ 21.860908] audit: type=1400 audit(1734440098.312:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=420 comm="apparmor_parser"
<5>[ 21.861360] audit: type=1400 audit(1734440098.312:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=421 comm="apparmor_parser"
<5>[ 21.863907] audit: type=1400 audit(1734440098.315:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=422 comm="apparmor_parser"
<5>[ 21.870499] audit: type=1400 audit(1734440098.321:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=425 comm="apparmor_parser"
<5>[ 21.870950] audit: type=1400 audit(1734440098.322:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=423 comm="apparmor_parser"
<5>[ 21.871814] audit: type=1400 audit(1734440098.322:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=426 comm="apparmor_parser"
<5>[ 21.878349] audit: type=1400 audit(1734440098.329:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=427 comm="apparmor_parser"
<5>[ 21.882497] audit: type=1400 audit(1734440098.333:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=428 comm="apparmor_parser"
<3>[ 21.924685] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 21.964638] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 22.241927] ACPI: bus type thunderbolt registered
<6>[ 22.251052] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 22.251614] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 22.272974] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 22.284512] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 22.304862] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 22.304871] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 22.305537] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 22.318388] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 22.318394] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 22.329036] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 22.331137] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 22.332432] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 22.346369] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 22.351680] intel_rapl_common: Found RAPL domain package
<6>[ 22.351690] intel_rapl_common: Found RAPL domain dram
<6>[ 22.384113] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 22.454791] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 184
<6>[ 22.454797] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 22.485941] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 22.584791] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 22.584796] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 22.584797] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 22.584799] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 22.584799] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 22.614225] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<4>[ 22.620196] block nvme0n1: No UUID available providing old NGUID
<6>[ 22.663284] cryptd: max_cpu_qlen set to 1000
<6>[ 22.740528] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:91
<6>[ 22.740535] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 22.740646] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 22.787490] AES CTR mode by8 optimization enabled
<6>[ 22.804365] evm: overlay not supported
<6>[ 22.984686] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 23.014411] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 23.014417] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 23.014419] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 23.373789] intel_rapl_common: Found RAPL domain package
<6>[ 23.373795] intel_rapl_common: Found RAPL domain core
<6>[ 23.374010] intel_rapl_common: Found RAPL domain dram
<6>[ 23.374012] intel_rapl_common: Found RAPL domain psys
<6>[ 23.427970] loop0: detected capacity change from 0 to 8
<6>[ 23.492447] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 23.531543] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 23.639607] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 23.639630] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 23.694794] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 23.852894] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 24.018025] hid: raw HID events driver (C) Jiri Kosina
<6>[ 24.024487] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 24.060685] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.061928] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.063228] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.064189] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.065504] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.066121] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.071950] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.076091] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.080222] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.083186] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 24.086915] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.089490] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 24.656603] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 24.656632] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 25.639793] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 25.639813] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 27.432737] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 36.594607] systemd-journald[205]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 52.902209] [IGT] xe_module_load: executing
<7>[ 52.912560] [IGT] xe_module_load: starting subtest load
<6>[ 53.076961] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 53.078439] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 53.078450] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 53.078558] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 53.078668] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 53.085908] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 53.089876] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 53.089973] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 53.090042] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 53.090103] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 53.090162] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 53.090221] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 53.090279] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 53.090333] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 53.090386] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 53.090437] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 53.090488] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 53.090537] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 53.090585] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 53.090633] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 53.090699] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 53.090809] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 53.091907] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 53.091993] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 53.096735] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 53.096863] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x000000E2 [0x71/00]
<7>[ 53.096929] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 53.099711] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 53.100475] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 53.100532] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 53.100605] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 53.100669] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 53.100724] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 53.100785] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 53.100846] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 53.101524] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 53.105604] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 53.105681] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 53.105743] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 53.105804] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 53.105864] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 53.105923] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 53.105978] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 53.106021] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 53.106064] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 53.106106] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 53.106147] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 53.106188] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 53.106229] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 53.106269] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 53.107450] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 53.110519] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 53.111477] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 53.111558] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 53.111646] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 53.113171] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 53.113312] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000066 [0x33/00]
<7>[ 53.113370] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 53.132718] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 53.133106] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 53.133247] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 53.133385] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 53.133514] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 53.133630] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 53.133775] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 53.133884] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 53.134147] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0
<7>[ 53.134328] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 53.134545] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 53.134712] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 53.134864] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 53.135014] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 53.135158] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 53.135328] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 53.135481] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 53.135648] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 53.135826] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 53.135981] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 53.136139] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 53.136291] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 53.136437] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 53.136578] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 53.136722] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 53.136849] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.136971] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.137093] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 53.137213] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.137324] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.137436] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.137546] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 53.137651] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.137777] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.137882] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.137983] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 53.138082] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.138182] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.138281] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.138383] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 53.138483] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.138582] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.138683] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.138775] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 53.138865] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.138949] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.139036] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.139124] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 53.139663] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 53.139766] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 53.139853] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 53.139937] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 53.140017] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 53.140099] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 53.140181] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 53.140265] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 53.140347] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 53.140435] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 53.140520] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 53.140602] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 53.140687] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 53.140762] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 53.140836] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 53.140906] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 53.140974] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 53.141040] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 53.141104] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 53.141173] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.141238] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.141303] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.141368] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 53.141433] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 53.141502] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.141565] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.141630] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.141706] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 53.141804] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 53.141930] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 53.142051] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 53.142188] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 53.142343] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 53.142455] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 53.142535] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 53.142616] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 53.142745] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 53.142842] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
<7>[ 53.142858] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 53.142962] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 53.143048] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 53.143135] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 53.143477] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 53.143627] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 53.144679] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 53.145424] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 53.145514] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 53.145597] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 53.145688] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 53.145790] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 53.145893] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x578856c4 (EVT_HTP)
<7>[ 53.145997] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 53.146083] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 53.146172] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.146254] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 53.146332] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.146414] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 53.146497] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 53.146576] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 53.146674] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.146761] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 53.146847] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.146930] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 53.147011] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 53.147082] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 53.147149] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.147215] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 53.147281] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.147345] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 53.147347] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 53.147511] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 53.147688] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 53.147788] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 53.147882] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 53.147972] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 53.148047] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 53.148119] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 53.152738] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 53.155177] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 53.155310] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 53.155430] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 53.155625] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 53.156041] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 53.156222] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 53.156338] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 53.156448] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 53.156561] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 53.156670] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 53.156772] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 53.156872] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 53.156969] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 53.157066] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 53.157184] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 53.157405] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 53.157512] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 53.157616] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 53.157724] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 53.157822] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 53.158067] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<6>[ 53.158189] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.24)
<7>[ 53.158220] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 53.159605] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 53.159852] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 53.161861] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 53.162471] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 53.163287] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85
<7>[ 53.164798] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 53.165313] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 53.167849] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 53.177281] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 53.177292] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.177294] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.177295] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 53.177298] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.177299] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 53.177304] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.177305] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 53.177308] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.177346] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.177347] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.177348] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.177357] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.177885] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 53.178420] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 53.178532] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 53.178673] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 53.178810] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 53.178980] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 53.179074] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 53.179156] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 53.179237] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 53.179316] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 53.179427] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 53.179601] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 53.179765] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.179894] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 53.180201] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 53.180314] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.180418] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 53.180623] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 53.180744] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.180851] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 53.181210] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 53.181324] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 53.181433] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 53.181509] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 53.181583] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 53.181661] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 53.181733] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 53.181804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 53.181873] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 53.181942] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 53.182010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 53.182078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 53.182146] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 53.182215] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 53.182285] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 53.182356] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 53.182424] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 53.182491] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 53.182557] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 53.182622] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 53.182693] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 53.183452] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 53.183546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 53.183616] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 53.183695] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 53.183761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.183826] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.183890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.183956] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 53.184027] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 53.184087] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.184144] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.184200] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.184262] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 53.184329] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 53.184391] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.184452] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.184511] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.184605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 53.184686] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 53.184768] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 53.184850] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 53.185006] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 53.185064] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 53.185119] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 53.185177] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 53.185232] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 53.185287] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 53.185345] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 53.185428] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 53.185491] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 53.185550] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 53.185607] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 53.185670] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 53.185726] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 53.185781] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 53.185862] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 53.185919] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 53.185974] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 53.186029] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 53.186081] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 53.186134] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 53.186188] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 53.186376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 53.186468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 53.186558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 53.186638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 53.186721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 53.186796] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 53.186868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 53.186939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 53.187010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 53.187081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 53.187151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 53.187219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 53.187289] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 53.187357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 53.187427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, pipeline full: 0, guardband: 105 flipline: 1906, vmin vblank: 1802, vmax vblank: 1801
<7>[ 53.187498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.187568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.187637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.187712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.187778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.187842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 53.187905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 53.187967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 53.188028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 53.188088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 53.188147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 53.188207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 53.188266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 53.188325] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.188383] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.188441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.188499] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.188558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.188619] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.188688] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.188753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.188818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.188881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.188944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 53.189007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 53.189212] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 53.189284] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 53.189353] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 53.189583] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 53.189674] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 53.201131] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 53.240855] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 53.429628] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 53.429632] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 53.429633] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 53.429719] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 53.429810] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 53.429894] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 53.429975] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 53.430065] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 53.430154] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 53.430258] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 53.430315] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 53.430372] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 53.430426] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 53.431394] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 53.431452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 53.431514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 53.431571] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 53.431628] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 53.431698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 53.431758] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 53.431822] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 53.431886] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 53.431947] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 53.432009] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 53.432068] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 53.432124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 53.432180] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 53.432234] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 53.432285] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 53.432336] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 53.432387] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 53.432437] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 53.432489] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 53.432542] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 53.432594] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 53.432644] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 53.432707] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 53.432758] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 53.432809] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 53.432868] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 53.432928] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 53.432987] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 53.433044] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 53.433097] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 53.433149] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 53.433205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 53.433260] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 53.433313] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 53.433366] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 53.433422] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 53.433477] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 53.433683] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 53.433740] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 53.433803] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 53.434180] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 53.434228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 53.434273] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 53.434440] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 53.434498] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7>[ 53.434552] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 53.434603] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 53.434656] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 53.434702] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 53.435156] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 53.435217] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 53.435274] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 53.435329] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 53.435382] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 53.435436] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 53.435488] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 53.435540] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 53.435590] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 53.435638] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 53.435697] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 53.435748] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 53.435799] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 53.435848] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 53.435915] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 53.436063] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 53.438416] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 53.451303] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 53.452107] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000066 [0x33/00]
<7>[ 53.452183] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 53.461872] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 53.462252] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 53.463007] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 53.463098] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 53.463183] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 53.463258] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 53.463336] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 53.463409] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 53.463479] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 53.463549] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 53.463620] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 53.466298] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 53.466407] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 53.466518] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 53.468599] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 53.473683] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 53.473688] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 53.473690] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 53.473691] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 53.473693] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 53.473694] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 53.473695] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 53.473697] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 53.473698] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 53.473699] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 53.473744] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 53.473911] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 53.474058] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 53.474774] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 53.474896] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 53.475018] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 53.475134] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 53.475248] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 53.475361] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 53.475468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 53.475578] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 53.475698] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 53.475812] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 53.475923] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 53.476031] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 53.476136] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 53.476246] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 53.476357] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 53.476465] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 53.476579] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 53.476701] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 53.476830] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 53.476962] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 53.477075] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 53.477184] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 53.477306] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 53.477433] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 53.477550] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 53.477661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 53.477788] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 53.478958] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 53.479154] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 53.479663] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 53.479818] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 53.480516] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 53.480673] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 53.480807] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 53.480936] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 53.481065] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 53.481186] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 53.481303] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 53.481419] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 53.481535] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 53.481645] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 53.481776] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 53.481878] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 53.481985] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 53.482086] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 53.482204] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 53.482353] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 53.502092] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 53.503223] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 53.503358] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[ 53.503420] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 53.523022] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 53.523507] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 53.524679] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 53.527375] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 53.529822] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 53.571706] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 53.573273] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 53.573701] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 53.573977] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 53.574235] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 53.574445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 53.574736] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 53.574999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 53.575251] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 53.575486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 53.576053] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 53.576421] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 53.576637] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 53.585471] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 53.589523] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 53.594707] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 53.595526] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 53.597956] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 53.598060] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 53.598535] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 53.599417] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 53.599475] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 53.599872] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 53.600417] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 53.600451] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 53.600805] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 53.601256] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 53.601279] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 53.601309] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 53.609174] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 53.611582] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 53.612531] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 53.612636] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 53.613924] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 53.614013] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 53.614093] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 53.614165] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 53.614316] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 53.614478] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 53.614493] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 53.615460] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 53.615975] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 53.616089] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 53.616197] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 53.616454] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 53.616461] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.616463] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.616464] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 53.616467] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.616469] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 53.616474] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.616476] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 53.616479] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.616505] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 53.616596] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 53.617251] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 53.617348] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 53.618347] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 53.618543] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.618545] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.618546] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.618581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 53.618594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.618606] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 53.618617] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 53.618784] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.618888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 53.618898] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 53.618906] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 53.618914] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 53.619044] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.619144] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 53.619153] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 53.619160] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 53.619167] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 53.619275] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.619368] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 53.619376] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 53.619383] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 53.619386] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 53.619389] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 53.619391] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 53.619447] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 53.619456] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 53.619459] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 53.619461] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 53.619464] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 53.619473] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 53.619500] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 53.619544] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 53.619573] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 53.619790] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 53.619805] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 53.619937] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 53.627076] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d7a000
<6>[ 53.627786] fbcon: xedrmfb (fb0) is primary device
<7>[ 53.628713] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 53.628853] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 53.628969] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 53.629078] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 53.629181] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 53.629282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 53.629381] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 53.629476] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 53.629567] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 53.629659] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 53.629757] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 53.629861] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 53.629963] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 53.630051] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 53.630132] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 53.630212] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 53.630289] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 53.630366] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 53.630443] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 53.630518] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 53.630595] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 53.630686] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 53.630777] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 53.630865] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 53.630954] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 53.631036] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 53.631109] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 53.631181] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 53.631254] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 53.631326] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 53.631397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 53.631472] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 53.631549] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 53.631669] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 53.631773] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 53.631878] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 53.631974] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 53.632051] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 53.632123] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.632194] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.632264] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.632333] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.632401] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.632469] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.632536] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.632603] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.632691] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.632769] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.632848] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.632924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.633001] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.633074] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.633144] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.633212] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.633275] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.633335] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.633394] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.633452] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.633510] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 53.633593] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 53.633679] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 53.633781] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 53.633882] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 53.633982] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 53.634074] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 53.634173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 53.634261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 53.634348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 53.634428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 53.634501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 53.634572] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 53.634642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 53.634735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 53.634825] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 53.634913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 53.634992] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 53.635059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 53.635123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 53.635187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 53.635249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 53.635310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 53.635369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 53.635427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 53.635485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 53.635544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 53.635602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1905, vmax: 2859, pipeline full: 0, guardband: 106 flipline: 1906, vmin vblank: 1800, vmax vblank: 2753
<7>[ 53.635665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.635743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.635826] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.635911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.635989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.636051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 53.636112] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 53.636171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 53.636229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 53.636287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 53.636343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 53.636401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 53.636458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 53.636514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.636569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.636627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.636701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.636785] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.636865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.636941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.637015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.637089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.637155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.637209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 53.637264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 53.637319] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 53.637375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 53.637433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 53.637490] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 53.637547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 53.637604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 53.660283] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 53.676717] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 53.677013] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 53.699781] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 53.865788] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 53.867257] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 53.869904] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 53.869888] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 53.870379] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 53.870356] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 53.870810] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 53.923064] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 53.923462] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 53.953910] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 53.954426] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 53.954479] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 53.956178] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 53.956202] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 53.957814] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 53.958161] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 53.958447] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 53.958710] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 53.959010] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 53.959008] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 53.959263] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 53.959511] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 53.959782] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 53.960075] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 53.960315] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 53.960551] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 53.960853] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 53.961098] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 53.961333] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 53.961560] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 53.961801] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 53.962087] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 53.963649] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 53.963882] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (491 ms remaining)
<7>[ 54.101977] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 54.456941] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 54.528839] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 54.529117] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 54.529375] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 54.565940] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 54.566204] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 54.566451] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 54.566851] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 54.641429] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.641444] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.641579] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.783779] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 54.785970] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 54.786244] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 54.788815] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 54.790073] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 54.791019] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 54.792045] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 54.793078] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 54.794237] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 54.794457] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 54.795998] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 54.796223] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 54.796939] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 54.797309] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 54.797552] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 54.797855] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 54.799600] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 54.799617] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 54.799888] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 54.814215] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 54.816353] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 54.816678] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 54.818685] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 54.821425] Console: switching to colour frame buffer device 180x56
<6>[ 54.836306] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 54.851822] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 54.851998] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 54.852043] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 54.852187] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 54.852486] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 54.852401] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 54.852516] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 54.852603] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 54.852807] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 54.852975] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 54.853133] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 54.853283] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 54.853428] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 54.853571] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 54.853765] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 54.853882] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 54.853940] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 54.854109] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 54.854277] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 54.854442] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 54.854632] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 54.854618] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 54.854844] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 54.854897] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.855013] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 54.855146] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.855186] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 54.855396] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 54.855621] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 54.855634] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.855638] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.855641] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 54.855648] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.855651] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 54.855673] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.855595] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 54.855677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 54.855684] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.855722] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 54.855790] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 54.855972] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 54.855962] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 54.856188] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 54.856480] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 54.856815] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 54.857088] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 54.858051] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 54.858063] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 54.858254] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 54.859624] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.859630] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.859633] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.859722] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 54.859760] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.859785] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 54.859809] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 54.860124] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 54.860417] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 54.860680] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 54.860700] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 54.861022] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.862241] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 54.862274] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 54.862298] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 54.862600] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.863600] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 54.863630] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 54.863663] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 54.863958] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.864163] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 54.864187] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 54.864199] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 54.864206] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 54.864212] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 54.864444] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 54.864480] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 54.864490] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 54.864499] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 54.864507] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 54.864552] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 54.868468] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 54.868705] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 54.882137] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 54.922322] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 54.924924] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [xe])
<7>[ 54.925132] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 54.927853] xe 0000:00:02.0: [drm:i915_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 54.949256] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 54.949400] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 54.949483] [IGT] xe_module_load: exiting, ret=0
<7>[ 54.965599] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 54.965756] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 54.965842] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 54.965925] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 54.966006] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 54.966082] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 54.966147] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 54.966211] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 54.966274] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 54.966337] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 54.966399] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 54.966460] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 54.966521] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 54.966581] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 54.966641] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 54.966730] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 54.966803] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 54.966874] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 54.966944] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 54.967013] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 54.967083] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 54.967145] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 54.967200] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 54.967254] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 54.967308] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 54.967362] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 54.967417] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 54.967472] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 54.967525] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 54.967578] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 54.967629] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 54.967696] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 54.967765] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 54.967834] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 54.967902] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 54.967970] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 54.969153] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 54.969272] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 54.969365] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 54.975912] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 54.977579] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 54.978197] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 54.979279] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 55.003775] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 55.003904] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 55.921653] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.921680] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.921676] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.001210] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 57.393389] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 57.393681] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<4>[ 60.874889] msr: Write to unrecognized MSR 0xe2 by wrmsr (pid: 1955).
<4>[ 60.874894] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.