<5>[ 0.000000] Linux version 6.13.0-rc3-xe+ (builder@lgci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Dec 17 05:19:07 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cb59fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cb5a000-0x000000006fed2fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fed3000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001053fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000105400000-0x000000087f7fffff] usable
<5>[ 0.000000] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 1
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cc32000 MEMATTR=0x690a8018 ESRT=0x690c5098 MOKvar=0x6cd66000
<6>[ 0.000000] efi: Remove mem267: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem269: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D84.2410171025 10/17/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000012] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000016] MTRR map: 10 entries (3 fixed + 7 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000362] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000363] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004214] esrt: Reserving ESRT space from 0x00000000690c5098 to 0x00000000690c51e8.
<7>[ 0.004222] e820: update [mem 0x690c5000-0x690c5fff] usable ==> reserved
<6>[ 0.004242] Using GB pages for direct mapping
<6>[ 0.004875] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.004876] printk: early log buf free: 258856(98%)
<6>[ 0.004877] Secure boot disabled
<6>[ 0.004878] ACPI: Early table checksum verification disabled
<6>[ 0.004881] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.004884] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004888] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.004891] ACPI: DSDT 0x000000006FFB7000 02523C (v02 INTEL LNL 00000002 01000013)
<6>[ 0.004892] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.004894] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.004895] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.004896] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.004898] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.004899] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.004900] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.004902] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.004903] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.004904] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.004906] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.004907] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.004909] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.004910] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.004911] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.004912] ACPI: SSDT 0x000000006FFDE000 008EEA (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.004914] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.004915] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.004916] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.004918] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.004919] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004920] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004922] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.004923] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004924] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.004925] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.004927] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.004928] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004929] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.004931] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.004932] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004933] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004935] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004936] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.004937] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.004938] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.004940] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004941] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004942] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.004944] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.004945] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.004946] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.004948] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.004949] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.004950] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.004952] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.004953] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004954] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.004955] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc23b]
<6>[ 0.004955] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.004956] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.004956] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.004956] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.004957] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.004957] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.004957] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.004958] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.004958] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.004958] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.004959] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.004959] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.004959] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.004959] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.004960] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.004960] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6ee9]
<6>[ 0.004960] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.004961] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.004961] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.004961] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.004962] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.004962] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.004962] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.004963] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.004963] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.004963] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.004963] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.004964] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.004964] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.004964] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.004965] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.004965] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.004965] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.004966] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.004966] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.004966] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.004967] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.004967] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.004967] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.004967] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.004968] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.004968] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.004968] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.004969] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.004969] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.004969] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.004970] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005031] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005223] No NUMA configuration found
<6>[ 0.005224] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005229] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<5>[ 5.072050] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
<6>[ 5.072083] Zone ranges:
<6>[ 5.072084] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 5.072085] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 5.072085] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 5.072086] Device empty
<6>[ 5.072087] Movable zone start for each node
<6>[ 5.072087] Early memory node ranges
<6>[ 5.072088] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 5.072088] node 0: [mem 0x0000000000100000-0x000000006cb59fff]
<6>[ 5.072089] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 5.072089] node 0: [mem 0x0000000105400000-0x000000087f7fffff]
<6>[ 5.072091] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 5.072095] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 5.072112] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 5.074117] On node 0, zone DMA32: 13477 pages in unavailable ranges
<6>[ 5.102692] On node 0, zone Normal: 21504 pages in unavailable ranges
<6>[ 5.102757] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 5.103224] ACPI: PM-Timer IO Port: 0x1808
<6>[ 5.103230] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 5.103280] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 5.103282] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 5.103284] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 5.103286] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 5.103287] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 5.103297] e820: update [mem 0x69063000-0x6907dfff] usable ==> reserved
<6>[ 5.103303] TSC deadline timer available
<6>[ 5.103305] CPU topo: Max. logical packages: 1
<6>[ 5.103305] CPU topo: Max. logical dies: 1
<6>[ 5.103305] CPU topo: Max. dies per package: 1
<6>[ 5.103307] CPU topo: Max. threads per core: 1
<6>[ 5.103307] CPU topo: Num. cores per package: 8
<6>[ 5.103308] CPU topo: Num. threads per package: 8
<6>[ 5.103308] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 5.103320] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 5.103321] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 5.103322] PM: hibernation: Registered nosave memory: [mem 0x69063000-0x6907dfff]
<6>[ 5.103323] PM: hibernation: Registered nosave memory: [mem 0x690c5000-0x690c5fff]
<6>[ 5.103324] PM: hibernation: Registered nosave memory: [mem 0x6cb5a000-0x6fed2fff]
<6>[ 5.103325] PM: hibernation: Registered nosave memory: [mem 0x6fed3000-0x6ff4ffff]
<6>[ 5.103325] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 5.103326] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 5.103326] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 5.103326] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 5.103326] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 5.103327] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1053fffff]
<6>[ 5.103328] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 5.103329] Booting paravirtualized kernel on bare hardware
<6>[ 5.103331] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 5.103339] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 5.103673] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 5.103678] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 5.103679] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 5.103693] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro earlyprintk=xdbc1,keep usbcore.autosuspend=-1
<5>[ 5.103771] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 5.103785] random: crng init done
<6>[ 5.105636] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 5.106549] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 5.106606] Fallback order for Node 0: 0
<6>[ 5.106608] Built 1 zonelists, mobility grouping on. Total pages: 8285945
<6>[ 5.106609] Policy zone: Normal
<6>[ 5.106618] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 5.106619] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 5.106621] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 5.107563] software IO TLB: area num 8.
<4>[ 5.153066] **********************************************************
<4>[ 5.153068] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.153068] ** **
<4>[ 5.153068] ** This system shows unhashed kernel memory addresses **
<4>[ 5.153069] ** via the console, logs, and other interfaces. This **
<4>[ 5.153069] ** might reduce the security of your system. **
<4>[ 5.153069] ** **
<4>[ 5.153069] ** If you see this message and you are not debugging **
<4>[ 5.153070] ** the kernel, report this immediately to your system **
<4>[ 5.153070] ** administrator! **
<4>[ 5.153070] ** **
<4>[ 5.153070] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 5.153070] **********************************************************
<6>[ 5.154146] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 5.154468] ftrace: allocating 59309 entries in 232 pages
<6>[ 5.179911] ftrace: allocated 232 pages with 4 groups
<6>[ 5.181131] Dynamic Preempt: voluntary
<6>[ 5.181583] Running RCU self tests
<6>[ 5.181584] Running RCU synchronous self tests
<6>[ 5.181591] rcu: Preemptible hierarchical RCU implementation.
<6>[ 5.181591] rcu: RCU lockdep checking is enabled.
<6>[ 5.181591] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 5.181592] Trampoline variant of Tasks RCU enabled.
<6>[ 5.181592] Rude variant of Tasks RCU enabled.
<6>[ 5.181592] Tracing variant of Tasks RCU enabled.
<6>[ 5.181593] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 5.181593] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 5.181632] Running RCU synchronous self tests
<6>[ 5.181636] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.181639] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.181641] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 5.191545] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 5.191996] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 5.192328] Console: colour dummy device 80x25
<6>[ 5.192336] printk: legacy console [tty0] enabled
<6>[ 5.193531] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 5.193539] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 5.193542] ... MAX_LOCK_DEPTH: 48
<6>[ 5.193546] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 5.193550] ... CLASSHASH_SIZE: 4096
<6>[ 5.193553] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 5.193557] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 5.193561] ... CHAINHASH_SIZE: 262144
<6>[ 5.193564] memory used by lock dependency info: 54145 kB
<6>[ 5.193569] memory used for stack traces: 4224 kB
<6>[ 5.193573] per task-struct memory footprint: 1920 bytes
<6>[ 5.193624] ACPI: Core revision 20240827
<6>[ 5.194503] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 5.194567] APIC: Switch to symmetric I/O mode setup
<6>[ 5.194572] DMAR: Host address width 38
<6>[ 5.194576] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 5.194607] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.194639] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 5.194662] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 5.194686] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 5.194707] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 5.194742] DMAR: SATC flags: 0x1
<6>[ 5.194752] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 5.194757] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 5.194762] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 5.196734] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 5.201223] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 5.201241] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 5.201315] CPU0: Thermal monitoring enabled (TM1)
<6>[ 5.201321] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 5.201526] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 5.201530] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 5.201540] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 5.201547] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 5.201552] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 5.201559] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 5.201566] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 5.201581] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 5.201587] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 5.201592] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 5.201597] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 5.201603] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 5.201609] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 5.201614] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 5.201619] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 5.201624] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 5.202236] Freeing SMP alternatives memory: 48K
<6>[ 5.202236] pid_max: default: 32768 minimum: 301
<6>[ 5.202236] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 5.202236] landlock: Up and running.
<6>[ 5.202236] Yama: becoming mindful.
<6>[ 5.202236] AppArmor: AppArmor initialized
<6>[ 5.202236] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.202236] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 5.202236] Running RCU synchronous self tests
<6>[ 5.202236] Running RCU synchronous self tests
<6>[ 5.202236] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 5.202236] Running RCU Tasks wait API self tests
<6>[ 5.202236] Running RCU Tasks Rude wait API self tests
<6>[ 5.202236] Running RCU Tasks Trace wait API self tests
<6>[ 5.202236] Performance Events: XSAVE Architectural LBR, no PEBS fmt6+, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 5.202236] core: cpu_core PMU driver:
<6>[ 5.202236] ... version: 6
<6>[ 5.202236] ... bit width: 48
<6>[ 5.202236] ... generic registers: 10
<6>[ 5.202240] ... value mask: 0000ffffffffffff
<6>[ 5.202244] ... max period: 00007fffffffffff
<6>[ 5.202248] ... fixed-purpose events: 4
<6>[ 5.202252] ... event mask: 0001000f000003ff
<6>[ 5.202282] signal: max sigframe size: 3632
<6>[ 5.202303] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 5.202387] rcu: Hierarchical SRCU implementation.
<6>[ 5.202391] rcu: Max phase no-delay instances is 400.
<6>[ 5.202516] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 5.204287] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 5.204555] smp: Bringing up secondary CPUs ...
<6>[ 5.204904] smpboot: x86: Booting SMP configuration:
<6>[ 5.204911] .... node #0, CPUs: #1 #2 #3
<6>[ 5.210166] Callback from call_rcu_tasks_trace() invoked.
<4>[ 5.214719] #4 #5 #6 #7
<6>[ 0.010060] core: cpu_atom PMU driver:
<6>[ 0.010060] ... version: 6
<6>[ 0.010060] ... bit width: 48
<6>[ 0.010060] ... generic registers: 8
<6>[ 0.010060] ... value mask: 0000ffffffffffff
<6>[ 0.010060] ... max period: 00007fffffffffff
<6>[ 0.010060] ... fixed-purpose events: 6
<6>[ 0.010060] ... event mask: 00000077000000ff
<6>[ 5.223352] smp: Brought up 1 node, 8 CPUs
<6>[ 5.223365] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 5.225403] Memory: 32345924K/33143780K available (24576K kernel code, 5584K rwdata, 9228K rodata, 5612K init, 68412K bss, 775236K reserved, 0K cma-reserved)
<6>[ 5.227385] devtmpfs: initialized
<6>[ 5.227428] x86/mm: Memory block size: 128MB
<6>[ 5.243334] ACPI: PM: Registering ACPI NVS region [mem 0x6fed3000-0x6ff4ffff] (512000 bytes)
<6>[ 5.243628] Running RCU synchronous self tests
<6>[ 5.243641] Running RCU synchronous self tests
<6>[ 5.243657] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 5.243657] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 5.244429] pinctrl core: initialized pinctrl subsystem
<6>[ 5.244924] PM: RTC time: 13:17:29, date: 2024-12-17
<6>[ 5.245802] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 5.246772] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 5.247065] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 5.247356] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 5.247415] audit: initializing netlink subsys (disabled)
<5>[ 5.247523] audit: type=2000 audit(1734441449.046:1): state=initialized audit_enabled=0 res=1
<6>[ 5.248487] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 5.248489] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 5.248496] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 5.248500] thermal_sys: Registered thermal governor 'user_space'
<6>[ 5.248505] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 5.248555] EISA bus registered
<6>[ 5.248582] cpuidle: using governor ladder
<6>[ 5.248582] cpuidle: using governor menu
<6>[ 5.248582] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 5.249309] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 5.249336] PCI: Using configuration type 1 for base access
<6>[ 5.249472] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 5.250635] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 5.250635] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 5.250635] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 5.250635] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 5.270236] raid6: avx2x4 gen() 76873 MB/s
<6>[ 5.287236] raid6: avx2x2 gen() 85630 MB/s
<6>[ 5.304237] raid6: avx2x1 gen() 77126 MB/s
<6>[ 5.304241] raid6: using algorithm avx2x2 gen() 85630 MB/s
<6>[ 5.321238] raid6: .... xor() 57592 MB/s, rmw enabled
<6>[ 5.321242] raid6: using avx2x2 recovery algorithm
<6>[ 5.325793] fbcon: Taking over console
<6>[ 5.326090] ACPI: Added _OSI(Module Device)
<6>[ 5.326098] ACPI: Added _OSI(Processor Device)
<6>[ 5.326105] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 5.326112] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 5.934902] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 5.959832] ACPI: EC: EC started
<6>[ 5.959859] ACPI: EC: interrupt blocked
<6>[ 5.964072] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 5.964082] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 6.080266] Callback from call_rcu_tasks() invoked.
<6>[ 6.269201] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.269210] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 6.340500] ACPI: Interpreter enabled
<6>[ 6.340592] ACPI: PM: (supports S0 S4 S5)
<6>[ 6.340597] ACPI: Using IOAPIC for interrupt routing
<6>[ 6.345886] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 6.345893] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 6.388808] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 6.388878] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 6.454955] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 6.455240] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 6.458369] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 6.730593] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 6.744482] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 6.913467] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 6.915067] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 6.923662] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 6.933544] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 6.933806] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 6.934047] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 7.027753] ACPI: \: Can't tag data node
<3>[ 7.028916] ACPI: \: Can't tag data node
<3>[ 7.030320] ACPI: \: Can't tag data node
<3>[ 7.031419] ACPI: \: Can't tag data node
<3>[ 7.032553] ACPI: \: Can't tag data node
<6>[ 7.237248] ACPI: \_TZ_.FN00: New power resource
<6>[ 7.237769] ACPI: \_TZ_.FN01: New power resource
<6>[ 7.238259] ACPI: \_TZ_.FN02: New power resource
<6>[ 7.238760] ACPI: \_TZ_.FN03: New power resource
<6>[ 7.239258] ACPI: \_TZ_.FN04: New power resource
<6>[ 7.240572] ACPI: \PIN_: New power resource
<6>[ 7.244369] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 7.244384] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 7.246217] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 7.249946] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 7.259171] PCI host bridge to bus 0000:00
<6>[ 7.259203] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 7.259211] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 7.259217] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 7.259224] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 7.259232] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 7.259558] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 7.262519] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 7.263098] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 7.263151] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 7.263190] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 7.263262] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 7.263613] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 7.264833] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 7.264850] pci 0000:00:04.0: BAR 0 [mem 0x3815c00000-0x3815c1ffff 64bit]
<6>[ 7.266015] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 7.266032] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 7.266049] pci 0000:00:05.0: BAR 4 [mem 0x3815c7b000-0x3815c7bfff 64bit]
<6>[ 7.266860] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 7.266910] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.266922] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 7.266940] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 7.267075] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 7.267129] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 7.271639] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 7.271694] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.271706] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 7.271724] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 7.271854] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 7.271904] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 7.275870] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 7.275918] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.275929] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 7.275949] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 7.276073] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 7.276122] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 7.280560] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 7.280579] pci 0000:00:0a.0: BAR 0 [mem 0x3815c50000-0x3815c5ffff 64bit]
<6>[ 7.280609] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 7.280803] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 7.280819] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 7.280835] pci 0000:00:0b.0: BAR 4 [mem 0x3815c7a000-0x3815c7afff 64bit]
<6>[ 7.281229] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.281253] pci 0000:00:0d.0: BAR 0 [mem 0x3815c40000-0x3815c4ffff 64bit]
<6>[ 7.281347] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 7.282860] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.282887] pci 0000:00:0d.2: BAR 0 [mem 0x3815bc0000-0x3815bfffff 64bit]
<6>[ 7.282906] pci 0000:00:0d.2: BAR 2 [mem 0x3815c79000-0x3815c79fff 64bit]
<6>[ 7.282984] pci 0000:00:0d.2: supports D1 D2
<6>[ 7.282988] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.284229] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 7.284255] pci 0000:00:0d.3: BAR 0 [mem 0x3815b80000-0x3815bbffff 64bit]
<6>[ 7.284274] pci 0000:00:0d.3: BAR 2 [mem 0x3815c78000-0x3815c78fff 64bit]
<6>[ 7.284353] pci 0000:00:0d.3: supports D1 D2
<6>[ 7.284357] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.285614] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 7.285639] pci 0000:00:12.0: BAR 0 [mem 0x3815c30000-0x3815c3ffff 64bit]
<6>[ 7.285724] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 7.288136] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.288178] pci 0000:00:13.0: BAR 0 [mem 0x3815c77000-0x3815c77fff 64bit]
<6>[ 7.289041] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 7.289422] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 7.289449] pci 0000:00:14.0: BAR 0 [mem 0x3815c20000-0x3815c2ffff 64bit]
<6>[ 7.289543] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 7.291357] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 7.291384] pci 0000:00:14.2: BAR 0 [mem 0x3815c68000-0x3815c6ffff 64bit]
<6>[ 7.291402] pci 0000:00:14.2: BAR 2 [mem 0x3815c76000-0x3815c76fff 64bit]
<6>[ 7.291702] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.291762] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.293210] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.293290] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.294912] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.294976] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.297048] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.297111] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 7.298467] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 7.298505] pci 0000:00:16.0: BAR 0 [mem 0x3815c71000-0x3815c71fff 64bit]
<6>[ 7.298662] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 7.301227] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 7.301256] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 7.301274] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 7.301571] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 7.301607] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.301615] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 7.301623] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 7.301746] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 7.301802] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 7.306320] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 7.306435] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.306466] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 7.306804] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 7.306966] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 7.311845] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 7.323303] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 7.323514] pci 0000:00:1f.3: BAR 0 [mem 0x3815b00000-0x3815b7ffff 64bit]
<6>[ 7.323711] pci 0000:00:1f.3: BAR 4 [mem 0x3815800000-0x38159fffff 64bit]
<6>[ 7.324157] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 7.328345] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 7.328432] pci 0000:00:1f.4: BAR 0 [mem 0x3815c70000-0x3815c700ff 64bit]
<6>[ 7.328510] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 7.331683] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 7.331763] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 7.332387] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 7.332453] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 7.332734] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 7.335622] pci 0000:00:1f.7: [8086:a824] type 00 class 0x130000 conventional PCI endpoint
<6>[ 7.335670] pci 0000:00:1f.7: BAR 0 [mem 0x3815a00000-0x3815afffff 64bit]
<6>[ 7.335703] pci 0000:00:1f.7: BAR 2 [mem 0x3815000000-0x38157fffff 64bit]
<6>[ 7.335735] pci 0000:00:1f.7: BAR 4 [mem 0x3815c60000-0x3815c67fff 64bit]
<6>[ 7.336372] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 7.336689] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 7.337009] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 7.337355] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 7.337398] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 7.337446] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 7.337482] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 7.337737] pci 0000:7f:00.0: supports D1 D2
<6>[ 7.337747] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 7.338897] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.340370] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 7.341536] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 7.341589] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 7.343237] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 7.343357] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 7.732228] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 21.379740] Low-power S0 idle used by default for system suspend
<6>[ 21.432103] ACPI: EC: interrupt unblocked
<6>[ 21.432113] ACPI: EC: event unblocked
<6>[ 21.432148] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 21.432154] ACPI: EC: GPE=0x6e
<6>[ 21.432160] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 21.432169] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 21.433409] iommu: Default domain type: Translated
<6>[ 21.433409] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 21.434625] SCSI subsystem initialized
<7>[ 21.435440] libata version 3.00 loaded.
<6>[ 21.436561] ACPI: bus type USB registered
<6>[ 21.436817] usbcore: registered new interface driver usbfs
<6>[ 21.436905] usbcore: registered new interface driver hub
<6>[ 21.437012] usbcore: registered new device driver usb
<6>[ 21.437297] pps_core: LinuxPPS API ver. 1 registered
<6>[ 21.437309] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 21.437358] PTP clock support registered
<6>[ 21.438282] EDAC MC: Ver: 3.0.0
<6>[ 21.440630] efivars: Registered efivars operations
<6>[ 21.443790] NetLabel: Initializing
<6>[ 21.443800] NetLabel: domain hash size = 128
<6>[ 21.443810] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 21.443971] NetLabel: unlabeled traffic allowed by default
<6>[ 21.444008] mctp: management component transport protocol core
<6>[ 21.444021] NET: Registered PF_MCTP protocol family
<6>[ 21.444101] PCI: Using ACPI for IRQ routing
<7>[ 21.487885] PCI: pci_cache_line_size set to 64 bytes
<6>[ 21.488201] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 21.488398] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 21.488419] e820: reserve RAM buffer [mem 0x69063000-0x6bffffff]
<7>[ 21.488428] e820: reserve RAM buffer [mem 0x690c5000-0x6bffffff]
<7>[ 21.488435] e820: reserve RAM buffer [mem 0x6cb5a000-0x6fffffff]
<7>[ 21.488443] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 21.490301] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 21.490330] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 21.490345] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 21.490386] vgaarb: loaded
<6>[ 21.491403] clocksource: Switched to clocksource tsc-early
<5>[ 21.501294] VFS: Disk quotas dquot_6.6.0
<6>[ 21.501317] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 21.502122] AppArmor: AppArmor Filesystem Enabled
<6>[ 21.502292] pnp: PnP ACPI init
<6>[ 21.503136] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 21.503147] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 21.504431] system 00:02: [io 0x06a4] has been reserved
<6>[ 21.504439] system 00:02: [io 0x06a0] has been reserved
<6>[ 21.523201] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 21.523211] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 21.523223] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 21.523231] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 21.523239] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 21.523249] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 21.523258] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 21.523265] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 21.525948] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 21.529041] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 21.529201] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 21.533445] pnp: PnP ACPI: found 8 devices
<6>[ 21.569556] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 21.570152] NET: Registered PF_INET protocol family
<6>[ 21.570475] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 21.575566] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 21.576016] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 21.576376] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 21.577671] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 21.580848] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 21.581607] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 21.583167] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 21.584845] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 21.584982] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 21.585010] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 21.585036] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 21.585142] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 21.585159] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 21.585174] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 21.585191] pci 0000:00:15.0: BAR 0 [mem 0x3815c72000-0x3815c72fff 64bit]: assigned
<6>[ 21.585311] pci 0000:00:15.1: BAR 0 [mem 0x3815c73000-0x3815c73fff 64bit]: assigned
<6>[ 21.585397] pci 0000:00:15.2: BAR 0 [mem 0x3815c74000-0x3815c74fff 64bit]: assigned
<6>[ 21.585483] pci 0000:00:15.3: BAR 0 [mem 0x3815c75000-0x3815c75fff 64bit]: assigned
<6>[ 21.585570] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 21.585641] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 21.585660] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 21.585681] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 21.585700] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 21.585729] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 21.585743] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 21.585764] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 21.585783] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 21.585809] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 21.585827] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 21.585847] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 21.585866] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 21.585894] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 21.585907] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 21.585926] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 21.585955] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 21.586001] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 21.586075] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 21.586090] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 21.586104] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 21.586119] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 21.586133] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 21.586149] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 21.586162] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 21.586175] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 21.586191] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 21.586203] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 21.586216] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 21.586233] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 21.586245] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 21.586259] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 21.586275] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 21.586288] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 21.586303] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 21.588645] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 21.592134] PCI: CLS 0 bytes, default 64
<6>[ 21.592288] DMAR: Intel-IOMMU force enabled due to platform opt in
<6>[ 21.592357] DMAR: No RMRR found
<6>[ 21.592395] DMAR: No ATSR found
<6>[ 21.592405] DMAR: IOMMU feature nwfs inconsistent
<6>[ 21.592410] DMAR: IOMMU feature dit inconsistent
<6>[ 21.592432] DMAR: IOMMU feature sc_support inconsistent
<6>[ 21.592443] DMAR: IOMMU feature dev_iotlb_support inconsistent
<6>[ 21.592456] DMAR: dmar1: Using Queued invalidation
<6>[ 21.592514] DMAR: dmar0: Using Queued invalidation
<6>[ 21.592533] DMAR: dmar2: Using Queued invalidation
<6>[ 21.594547] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 21.594720] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 21.594876] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 21.595014] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 21.598198] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 21.600451] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 21.600607] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 21.600761] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 21.600909] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 21.601132] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 21.601238] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 21.601345] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 21.601507] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 21.601668] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 21.601849] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 21.601951] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 21.602188] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 21.602287] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 21.602385] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 21.602488] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 21.602653] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 21.602760] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 21.602886] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 21.603040] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 21.603330] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 21.603439] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 21.603552] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 21.603666] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 21.603781] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 21.603893] pci 0000:00:1f.7: Adding to iommu group 17
<6>[ 21.604027] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 21.604189] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 21.605489] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 21.605556] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 21.605610] software IO TLB: mapped [mem 0x0000000063b5b000-0x0000000067b5b000] (64MB)
<6>[ 21.611450] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 21.611715] clocksource: Switched to clocksource tsc
<6>[ 21.612027] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 21.620727] Initialise system trusted keyrings
<5>[ 21.620871] Key type blacklist registered
<6>[ 21.621276] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 21.633566] zbud: loaded
<6>[ 21.635071] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 21.635216] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 21.635223] ntfs3: Read-only LZX/Xpress compression included
<5>[ 21.635752] integrity: Platform Keyring initialized
<5>[ 21.635780] integrity: Machine keyring initialized
<6>[ 21.642178] xor: automatically using best checksumming function avx
<5>[ 21.642190] Key type asymmetric registered
<5>[ 21.642203] Asymmetric key parser 'x509' registered
<6>[ 21.642348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 21.642682] io scheduler mq-deadline registered
<6>[ 21.643849] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 21.645673] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 21.647170] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 21.648529] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 21.649747] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 21.651197] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 21.651823] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 21.654854] Monitor-Mwait will be used to enter C-1 state
<7>[ 21.654997] Monitor-Mwait will be used to enter C-2 state
<7>[ 21.655049] Monitor-Mwait will be used to enter C-3 state
<6>[ 21.662941] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 21.663152] ACPI: button: Lid Switch [LID0]
<6>[ 21.663396] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 21.663566] ACPI: button: Sleep Button [SLPB]
<6>[ 21.663774] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 21.664066] ACPI: button: Power Button [PWRB]
<6>[ 21.836630] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 21.836716] ACPI: thermal: Thermal Zone [TZ00] (69 C)
<6>[ 21.838681] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 21.839526] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 21.839842] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 21.864494] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 21.893834] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 21.897067] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 21.921740] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 21.927772] hpet_acpi_add: no address or irqs in _CRS
<6>[ 21.928020] Linux agpgart interface v0.103
<6>[ 21.929102] ACPI: bus type drm_connector registered
<6>[ 21.965256] loop: module loaded
<6>[ 22.061144] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 22.251161] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 22.394180] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 22.588104] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 22.771461] Key type psk registered
<6>[ 22.777896] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 22.778948] nvme nvme0: pci function 0000:80:00.0
<6>[ 22.779366] tun: Universal TUN/TAP device driver, 1.6
<6>[ 22.781085] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 22.782810] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 22.784218] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 22.787868] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 22.787907] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 22.787937] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 22.788537] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
<6>[ 22.788645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 22.788663] usb usb1: Product: xHCI Host Controller
<6>[ 22.788676] usb usb1: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 22.788691] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 22.791184] hub 1-0:1.0: USB hub found
<6>[ 22.791326] hub 1-0:1.0: 1 port detected
<6>[ 22.797707] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
<6>[ 22.797730] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 22.797747] usb usb2: Product: xHCI Host Controller
<6>[ 22.797759] usb usb2: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 22.797772] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 22.800881] hub 2-0:1.0: USB hub found
<6>[ 22.800960] hub 2-0:1.0: 3 ports detected
<6>[ 22.815743] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 22.823148] nvme0n1: p1 p2
<6>[ 22.844834] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 22.844884] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 22.846351] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 22.848661] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 22.848694] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 22.848722] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 22.849145] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.13
<6>[ 22.849167] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 22.849184] usb usb3: Product: xHCI Host Controller
<6>[ 22.849196] usb usb3: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 22.849211] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 22.851058] hub 3-0:1.0: USB hub found
<6>[ 22.851158] hub 3-0:1.0: 8 ports detected
<6>[ 22.899319] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.13
<6>[ 22.899349] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 22.899367] usb usb4: Product: xHCI Host Controller
<6>[ 22.899379] usb usb4: Manufacturer: Linux 6.13.0-rc3-xe+ xhci-hcd
<6>[ 22.899394] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 22.901922] hub 4-0:1.0: USB hub found
<6>[ 22.902246] hub 4-0:1.0: 2 ports detected
<6>[ 22.914639] usbcore: registered new interface driver usb-storage
<6>[ 22.914836] usbcore: registered new interface driver usbserial_generic
<6>[ 22.914957] usbserial: USB Serial support registered for generic
<6>[ 22.915041] usbcore: registered new interface driver ftdi_sio
<6>[ 22.915102] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 22.915182] usbcore: registered new interface driver pl2303
<6>[ 22.915235] usbserial: USB Serial support registered for pl2303
<6>[ 22.915427] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 22.915442] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 23.628178] i8042: Can't read CTR while initializing i8042
<3>[ 23.628195] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 23.630111] mousedev: PS/2 mouse device common for all mice
<6>[ 23.632729] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 23.635536] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 23.635801] rtc_cmos rtc_cmos: setting system clock to 2024-12-17T13:17:48 UTC (1734441468)
<6>[ 23.636082] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 23.636172] i2c_dev: i2c /dev entries driver
<6>[ 23.643513] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 23.643546] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 23.643565] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 23.643625] device-mapper: uevent: version 1.0.3
<6>[ 23.644883] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 23.645357] platform eisa.0: Probing EISA bus 0
<4>[ 23.645446] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 23.645537] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 23.645621] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 23.645699] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 23.645779] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 23.645800] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 23.645820] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 23.645841] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 23.645862] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 23.645880] platform eisa.0: EISA: Detected 0 cards
<6>[ 23.645895] intel_pstate: Intel P-state driver initializing
<6>[ 23.649383] Hybrid CPU capacity scaling enabled
<6>[ 23.650432] intel_pstate: HWP enabled
<6>[ 23.650436] sdhci: Secure Digital Host Controller Interface driver
<6>[ 23.650441] sdhci: Copyright(c) Pierre Ossman
<6>[ 23.650527] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 23.652134] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 23.652715] drop_monitor: Initializing network drop monitor service
<6>[ 23.652883] NET: Registered PF_INET6 protocol family
<6>[ 23.655220] Segment Routing with IPv6
<6>[ 23.655261] In-situ OAM (IOAM) with IPv6
<6>[ 23.655301] NET: Registered PF_PACKET protocol family
<5>[ 23.655441] Key type dns_resolver registered
<4>[ 23.658999] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 23.659420] microcode: Current revision: 0x00000116
<6>[ 23.660129] IPI shorthand broadcast: enabled
<6>[ 23.673890] sched_clock: Marking stable (23664001455, 9060011)->(23833770161, -160708695)
<6>[ 23.675457] registered taskstats version 1
<5>[ 23.676484] Loading compiled-in X.509 certificates
<6>[ 23.704714] Demotion targets for Node 0: null
<6>[ 23.704926] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946)
<6>[ 23.704933] kmemleak: Automatic memory scanning thread started
<4>[ 23.704936] ------------[ cut here ]------------
<4>[ 23.704945] Debug warning: early ioremap leak of 1 areas detected.
please boot with early_ioremap_debug and report the dmesg.
<4>[ 23.704960] WARNING: CPU: 2 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x51/0x80
<4>[ 23.704972] Modules linked in:
<4>[ 23.704977] CPU: 2 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.13.0-rc3-xe+ #1
<4>[ 23.704985] Hardware name: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D84.2410171025 10/17/2024
<4>[ 23.704994] RIP: 0010:check_early_ioremap_leak+0x51/0x80
<4>[ 23.705000] Code: 48 83 c3 01 48 83 fb 08 75 e1 85 c0 75 0e 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 89 c6 48 c7 c7 60 7f ea 82 e8 af c0 96 fd <0f> 0b b8 01 00 00 00 48 8b 5d f8 c9 31 f6 31 ff c3 cc cc cc cc 48
<4>[ 23.705014] RSP: 0000:ffffc900000f7dc0 EFLAGS: 00010246
<4>[ 23.705019] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
<4>[ 23.705025] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
<4>[ 23.705031] RBP: ffffc900000f7dd0 R08: 0000000000000000 R09: 0000000000000000
<4>[ 23.705036] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
<4>[ 23.705042] R13: ffffffff83ad08f0 R14: ffffc900000f7de0 R15: 000000000003824c
<4>[ 23.705047] FS: 0000000000000000(0000) GS:ffff88885f300000(0000) knlGS:0000000000000000
<4>[ 23.705054] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[ 23.705059] CR2: 0000000000000000 CR3: 0000000003248001 CR4: 0000000000f70ef0
<4>[ 23.705074] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
<4>[ 23.705079] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
<4>[ 23.705085] PKRU: 55555554
<4>[ 23.705088] Call Trace:
<4>[ 23.705091] <TASK>
<4>[ 23.705095] ? show_regs+0x6c/0x80
<4>[ 23.705103] ? __warn+0x93/0x1c0
<4>[ 23.705109] ? check_early_ioremap_leak+0x51/0x80
<4>[ 23.705116] ? report_bug+0x182/0x1b0
<4>[ 23.705124] ? handle_bug+0x6e/0xb0
<4>[ 23.705130] ? exc_invalid_op+0x18/0x80
<4>[ 23.705136] ? asm_exc_invalid_op+0x1b/0x20
<4>[ 23.705144] ? check_early_ioremap_leak+0x51/0x80
<4>[ 23.705150] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 23.705155] ? __pfx_check_early_ioremap_leak+0x10/0x10
<4>[ 23.705160] do_one_initcall+0x76/0x400
<4>[ 23.705169] kernel_init_freeable+0x3da/0x6a0
<4>[ 23.705177] ? __pfx_kernel_init+0x10/0x10
<4>[ 23.705182] kernel_init+0x1b/0x200
<4>[ 23.705187] ret_from_fork+0x44/0x70
<4>[ 23.705192] ? __pfx_kernel_init+0x10/0x10
<4>[ 23.705196] ret_from_fork_asm+0x1a/0x30
<4>[ 23.705204] </TASK>
<4>[ 23.705206] irq event stamp: 78830905
<4>[ 23.705210] hardirqs last enabled at (78830913): [<ffffffff812a5a49>] __up_console_sem+0x79/0xa0
<4>[ 23.705218] hardirqs last disabled at (78830920): [<ffffffff812a5a2e>] __up_console_sem+0x5e/0xa0
<4>[ 23.705225] softirqs last enabled at (78830716): [<ffffffff811d54cf>] __irq_exit_rcu+0x13f/0x160
<4>[ 23.705232] softirqs last disabled at (78830709): [<ffffffff811d54cf>] __irq_exit_rcu+0x13f/0x160
<4>[ 23.705239] ---[ end trace 0000000000000000 ]---
<5>[ 23.705439] Key type .fscrypt registered
<5>[ 23.705443] Key type fscrypt-provisioning registered
<6>[ 23.708043] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 23.709739] Key type encrypted registered
<6>[ 23.709752] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 23.709874] ima: No TPM chip found, activating TPM-bypass!
<5>[ 23.709891] Loading compiled-in module X.509 certificates
<5>[ 23.710681] Loaded X.509 cert 'Build time autogenerated kernel key: b91506873b93a8693c5a7233571b4af65392b04f'
<6>[ 23.710696] ima: Allocated hash algorithm: sha256
<6>[ 23.710742] ima: No architecture policies found
<6>[ 23.710851] evm: Initialising EVM extended attributes:
<6>[ 23.710856] evm: security.selinux
<6>[ 23.710859] evm: security.SMACK64
<6>[ 23.710862] evm: security.SMACK64EXEC
<6>[ 23.710865] evm: security.SMACK64TRANSMUTE
<6>[ 23.710869] evm: security.SMACK64MMAP
<6>[ 23.710872] evm: security.apparmor
<6>[ 23.710874] evm: security.ima
<6>[ 23.710877] evm: security.capability
<6>[ 23.710880] evm: HMAC attrs: 0x1
<6>[ 23.712871] PM: Magic number: 4:413:281
<6>[ 23.712916] tty tty18: hash matches
<6>[ 23.712963] acpi SPI2012:00: hash matches
<6>[ 23.713006] memory memory147: hash matches
<6>[ 23.713114] printk: legacy console [netcon0] enabled
<6>[ 23.713122] netconsole: network logging started
<6>[ 23.713608] RAS: Correctable Errors collector initialized.
<6>[ 23.713735] clk: Disabling unused clocks
<6>[ 23.713746] PM: genpd: Disabling unused power domains
<6>[ 23.714558] md: Waiting for all devices to be available before autodetect
<6>[ 23.714566] md: If you don't use raid, use raid=noautodetect
<6>[ 23.714571] md: Autodetecting RAID arrays.
<6>[ 23.714580] md: autorun ...
<6>[ 23.714584] md: ... autorun DONE.
<6>[ 23.763269] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none.
<6>[ 23.763341] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 23.763990] devtmpfs: mounted
<6>[ 23.774968] Freeing unused decrypted memory: 2028K
<6>[ 23.775677] Freeing unused kernel image (initmem) memory: 5612K
<6>[ 23.775705] Write protecting the kernel read-only data: 34816k
<6>[ 23.776280] Freeing unused kernel image (rodata/data gap) memory: 1012K
<6>[ 23.780862] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 23.781508] Run /sbin/init as init process
<7>[ 23.781512] with arguments:
<7>[ 23.781514] /sbin/init
<7>[ 23.781515] with environment:
<7>[ 23.781515] HOME=/
<7>[ 23.781516] TERM=linux
<7>[ 23.781517] BOOT_IMAGE=/boot/drm_intel
<7>[ 23.836958] systemd[1]: Inserted module 'autofs4'
<7>[ 23.855475] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 23.855518] systemd[1]: Detected architecture x86-64.
<7>[ 23.856607] systemd[1]: Hostname set to <shard-lnl-8>.
<7>[ 24.021577] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 24.022414] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 24.085185] systemd[1]: Queued start job for default target graphical.target.
<7>[ 24.122848] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 24.126147] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 24.128204] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 24.128523] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 24.129371] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 24.129511] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8...
<7>[ 24.129609] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 24.129707] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 24.129785] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 24.129861] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 24.129943] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 24.130230] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 24.131146] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 24.131454] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 24.131758] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 24.131995] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 24.132205] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 24.132489] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 24.132787] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 24.133080] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 24.133273] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 24.133563] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 24.133805] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 24.137054] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 24.139558] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 24.142278] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 24.144963] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 24.150621] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 24.153982] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 24.157126] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 24.160436] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 24.163005] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 24.165883] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 24.169394] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 24.173618] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 24.177152] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 24.180402] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 24.186703] systemd-journald[205]: Collecting audit messages is disabled.
<7>[ 24.188488] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 24.188819] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 24.194954] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 24.197851] pstore: Using crash dump compression: deflate
<6>[ 24.200023] pstore: Registered efi_pstore as persistent store backend
<7>[ 24.202466] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<6>[ 24.202618] fuse: init (API version 7.41)
<7>[ 24.204522] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 24.204604] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 24.209615] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 24.217454] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 24.367141] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. Quota mode: none.
<6>[ 24.404923] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:274595840k SS
<7>[ 24.421761] systemd-journald[205]: Received client request to flush runtime journal.
<7>[ 24.441797] systemd-journald[205]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 24.441815] systemd-journald[205]: Rotating system journal.
<4>[ 25.099777] nvme nvme0: using unchecked data buffer
<6>[ 25.254500] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 25.299835] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<6>[ 25.308478] Consider using thermal netlink events interface
<4>[ 25.315458] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring
<6>[ 25.317123] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 25.318900] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 25.327338] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 25.384262] pci 0000:00:05.0: Setting to D3hot
<6>[ 25.397082] pci 0000:00:0b.0: Setting to D3hot
<4>[ 25.409203] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 25.409518] intel_pmc_core INT33A1:00: initialized
<5>[ 25.420047] audit: type=1400 audit(1734441470.282:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=421 comm="apparmor_parser"
<5>[ 25.420603] audit: type=1400 audit(1734441470.283:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=422 comm="apparmor_parser"
<5>[ 25.420921] audit: type=1400 audit(1734441470.283:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=420 comm="apparmor_parser"
<5>[ 25.424094] audit: type=1400 audit(1734441470.286:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=423 comm="apparmor_parser"
<5>[ 25.428765] audit: type=1400 audit(1734441470.291:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=425 comm="apparmor_parser"
<5>[ 25.429447] audit: type=1400 audit(1734441470.292:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=424 comm="apparmor_parser"
<4>[ 25.430068] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<5>[ 25.431902] audit: type=1400 audit(1734441470.294:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=426 comm="apparmor_parser"
<5>[ 25.434330] audit: type=1400 audit(1734441470.297:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=427 comm="apparmor_parser"
<5>[ 25.439938] audit: type=1400 audit(1734441470.302:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=430 comm="apparmor_parser"
<5>[ 25.440557] audit: type=1400 audit(1734441470.303:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=429 comm="apparmor_parser"
<3>[ 25.526651] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 25.605925] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 25.868094] ACPI: bus type thunderbolt registered
<6>[ 25.880580] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 25.880997] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 25.908142] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 25.910418] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 25.928177] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 25.928182] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 25.928325] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 25.930414] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 25.945027] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 25.946022] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 25.946029] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 25.983248] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 26.004531] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 26.013772] intel_rapl_common: Found RAPL domain package
<6>[ 26.013782] intel_rapl_common: Found RAPL domain dram
<6>[ 26.017989] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 26.069433] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 26.123019] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 184
<6>[ 26.123029] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 26.131810] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 26.131815] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 26.131816] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 26.131817] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 26.131818] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 26.157486] cryptd: max_cpu_qlen set to 1000
<6>[ 26.168525] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 26.214271] AES CTR mode by8 optimization enabled
<6>[ 26.234680] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:91
<6>[ 26.234687] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 26.234807] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<4>[ 26.255770] block nvme0n1: No UUID available providing old NGUID
<6>[ 26.628595] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 26.655584] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 26.655589] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 26.655591] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 26.752714] evm: overlay not supported
<6>[ 26.867964] loop0: detected capacity change from 0 to 8
<6>[ 26.878863] intel_rapl_common: Found RAPL domain package
<6>[ 26.878869] intel_rapl_common: Found RAPL domain core
<6>[ 26.879075] intel_rapl_common: Found RAPL domain dram
<6>[ 26.879077] intel_rapl_common: Found RAPL domain psys
<6>[ 27.073028] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 27.131495] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 27.160088] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 27.160110] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 27.257200] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 27.419024] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 27.653899] hid: raw HID events driver (C) Jiri Kosina
<6>[ 27.660290] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 27.697098] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 27.698324] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 27.699615] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 27.700639] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 27.702019] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 27.703015] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 27.706895] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 27.709440] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 27.711971] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 27.714150] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 27.716526] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 27.718065] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 28.409338] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 28.409364] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 29.287778] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 29.287808] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 30.984247] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 36.609439] systemd-journald[205]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 80.509786] [IGT] xe_module_load: executing
<7>[ 80.513818] [IGT] xe_module_load: starting subtest load
<6>[ 80.679448] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 80.680969] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 80.680980] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG / Xe3_LPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 80.681078] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 80.681160] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 80.693590] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 80.697930] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 80.698010] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 80.698092] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 80.698165] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 80.698235] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 80.698303] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 80.698368] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 80.698424] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 80.698477] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 80.698528] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 80.698579] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 80.698632] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 80.698683] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 80.698733] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 80.698785] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 80.698882] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 80.700228] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 80.700314] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 80.705119] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 80.705256] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 80.708021] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 80.709012] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 80.709168] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 80.709329] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 80.709447] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 80.709559] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 80.709676] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 80.709790] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 80.710750] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 80.715566] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 80.715789] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 80.715981] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 80.716189] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 80.716363] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 80.716530] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 80.716693] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 80.716884] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 80.717057] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 80.717253] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 80.717401] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 80.717554] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 80.717689] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 80.717822] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 80.720105] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 80.723542] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 80.724632] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 80.724757] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 80.724911] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 80.726726] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 80.726871] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000066 [0x33/00]
<7>[ 80.726974] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 80.746131] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 80.746549] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 80.746721] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 80.746895] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 80.747052] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 80.747243] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 80.747400] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 80.747555] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 80.747920] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0
<7>[ 80.748193] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 80.748501] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 80.748727] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 80.748944] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 80.749177] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 80.749383] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 80.749679] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 80.749900] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 80.750176] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 80.750434] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 80.750691] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 80.750953] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 80.751227] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 80.751522] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 80.751750] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 80.751972] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 80.752223] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 80.752439] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 80.752661] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 80.752851] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 80.753039] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 80.753265] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 80.753439] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 80.753608] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 80.753780] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 80.753947] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 80.754117] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 80.754277] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 80.754427] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 80.754578] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 80.754729] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 80.754888] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 80.755032] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 80.755192] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 80.755337] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 80.755480] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 80.755616] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 80.755746] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 80.755880] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 80.756770] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 80.757026] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 80.757227] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 80.757387] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 80.757541] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 80.757690] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 80.757838] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 80.757982] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 80.758109] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 80.758232] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 80.758357] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 80.758481] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 80.758592] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 80.758702] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 80.758801] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 80.758890] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 80.758981] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 80.759077] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 80.759172] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 80.759272] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 80.759383] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 80.759489] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 80.759595] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 80.759680] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 80.759765] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 80.759846] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 80.759927] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 80.760016] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 80.760162] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 80.760326] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 80.760483] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 80.760656] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 80.760831] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 80.760966] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 80.761063] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 80.761173] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 80.761302] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 80.761399] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
<7>[ 80.761416] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 80.761521] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 80.761610] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 80.761697] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 80.762063] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 80.762241] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 80.763516] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 80.763811] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 80.763902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 80.763988] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 80.764081] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 80.764169] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 80.764255] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x578856c4 (EVT_HTP)
<7>[ 80.764344] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 80.764422] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 80.764497] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 80.764572] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 80.764645] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 80.764720] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 80.764796] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 80.764869] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 80.764942] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 80.765018] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 80.765102] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 80.765196] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 80.765295] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 80.765380] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 80.765447] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 80.765512] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 80.765575] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 80.765640] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 80.767398] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 80.767540] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 80.767712] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 9 (9.0 usec)
<7>[ 80.767787] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 103 (103.0 usec)
<7>[ 80.767857] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 103 (103.0 usec)
<7>[ 80.767925] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 103 (103.0 usec)
<7>[ 80.767991] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 96 (96.0 usec)
<7>[ 80.768055] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 103 (103.0 usec)
<7>[ 80.773004] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 80.775389] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 80.775513] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 80.775628] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 80.775817] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 80.775996] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 80.776190] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 80.776311] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 80.776422] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 80.776532] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<6>[ 80.776647] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.24)
<7>[ 80.776636] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 80.776737] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 80.776836] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 80.776932] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 80.777028] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 80.777159] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 80.777295] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 80.777414] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 80.777522] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 80.777617] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 80.777709] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 80.777830] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 80.777982] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 80.779122] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 80.779264] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 80.781074] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 80.781705] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 80.782567] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85
<7>[ 80.783993] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 80.784662] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 80.786811] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 80.796150] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 80.796163] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 80.796165] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.796166] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 80.796169] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.796170] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 80.796175] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.796176] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 80.796179] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 80.796214] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 80.796215] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 80.796216] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 80.796223] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 80.796768] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 80.797299] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 80.797414] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 80.797550] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 80.797669] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 80.797792] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 80.797882] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 80.797966] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 80.798048] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 80.798152] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 80.798278] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 80.798493] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 80.798657] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 80.798775] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 80.799143] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 80.799281] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 80.799402] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 80.799619] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 80.799744] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 80.799858] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 80.800309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 80.800441] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 80.800547] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 80.800620] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 80.800696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 80.800772] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 80.800844] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 80.800915] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 80.800984] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 80.801053] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 80.801139] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 80.801220] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 80.801301] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 80.801378] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 80.801444] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 80.801509] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 80.801574] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 80.801638] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 80.801702] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 80.801762] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 80.801825] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 80.802592] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 80.802696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 80.802773] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 80.802848] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 80.802914] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 80.802973] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 80.803032] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 80.803108] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 80.803192] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 80.803268] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 80.803344] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 80.803415] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 80.803484] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 80.803556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 80.803620] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 80.803685] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 80.803744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 80.803839] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 80.803913] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 80.803977] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 80.804040] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 80.804211] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 80.804286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 80.804355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 80.804419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 80.804479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 80.804551] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 80.804624] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 80.804734] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 80.804811] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 80.804872] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 80.804929] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 80.804983] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 80.805037] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 80.805108] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 80.805216] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 80.805288] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 80.805356] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 80.805419] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 80.805479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 80.805541] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 80.805598] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 80.805793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 80.805891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 80.805979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 80.806064] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 80.806175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 80.806276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 80.806374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 80.806458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 80.806541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 80.806624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 80.806708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 80.806787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 80.806861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 80.806933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 80.807010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, pipeline full: 0, guardband: 105 flipline: 1906, vmin vblank: 1802, vmax vblank: 1801
<7>[ 80.807097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 80.807185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 80.807272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 80.807357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 80.807438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 80.807504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 80.807567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 80.807628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 80.807691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 80.807755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 80.807820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 80.807885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 80.807947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 80.808011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 80.808080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 80.808158] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 80.808240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 80.808320] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 80.808399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 80.808470] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 80.808542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 80.808621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 80.808698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 80.808770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 80.808841] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 80.809046] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 80.809135] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 80.809227] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 80.809494] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 80.809579] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 80.818479] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 80.849178] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 81.049692] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 81.049696] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 81.049696] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 81.049769] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 81.049857] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 81.049932] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 81.049997] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 81.050092] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 81.050191] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 81.050289] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 81.050355] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 81.050423] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 81.050485] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 81.051187] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 81.051255] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 81.051322] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 81.051384] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 81.051445] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 81.051506] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 81.051564] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 81.051624] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 81.051681] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 81.051737] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 81.051795] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 81.051850] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 81.051903] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 81.051956] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 81.052009] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 81.052061] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 81.052127] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 81.052178] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 81.052231] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 81.052280] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 81.052331] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 81.052384] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 81.052435] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 81.052486] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 81.052537] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 81.052586] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 81.052640] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 81.052694] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 81.052748] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 81.052798] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 81.052848] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 81.052899] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 81.052951] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 81.053003] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 81.053057] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 81.053122] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 81.053180] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 81.053239] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 81.053593] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 81.053642] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 81.053689] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 81.053863] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 81.053910] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 81.053955] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 81.054253] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 81.054312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7>[ 81.054374] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 81.054432] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 81.054478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 81.054525] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 81.054843] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 81.054904] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 81.054961] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 81.055015] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 81.055076] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 81.055131] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 81.055187] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 81.055245] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 81.055302] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 81.055358] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 81.055410] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 81.055458] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 81.055504] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 81.055550] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 81.055611] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 81.055740] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 81.058184] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 81.071519] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 81.072338] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 81.077144] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 81.077285] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x800001EC [0x76/01]
<7>[ 81.077362] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 81.080102] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 81.080416] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 81.081469] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 81.081552] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 81.081632] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 81.081709] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 81.081788] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 81.081855] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 81.081918] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 81.081975] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 81.082034] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 81.085810] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 81.085909] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 81.085989] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 81.088258] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 81.091954] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 81.091957] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 81.091958] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 81.091959] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 81.091959] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 81.091960] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 81.091961] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 81.091962] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 81.091962] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 81.091963] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 81.091983] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 81.092100] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 81.092217] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 81.092823] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 81.092896] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 81.092969] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 81.093040] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 81.093139] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 81.093228] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 81.093312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 81.093396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 81.093467] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 81.093533] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 81.093596] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 81.093656] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 81.093713] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 81.093770] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 81.093825] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 81.093878] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 81.093931] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 81.093983] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 81.094034] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 81.094092] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 81.094154] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 81.094217] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 81.094279] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 81.094341] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 81.094399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 81.094449] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 81.094510] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 81.095052] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 81.095139] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 81.095462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 81.095526] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 81.096011] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 81.096084] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 81.096160] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 81.096231] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 81.096300] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 81.096367] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 81.096424] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 81.096472] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 81.096520] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 81.096567] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 81.096614] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 81.096660] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 81.096705] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 81.096749] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 81.096809] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 81.096878] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 81.111532] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 81.112605] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 81.112830] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 81.132107] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 81.132515] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 81.133359] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 81.135386] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 81.138133] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 81.180120] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 81.181595] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 81.182155] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 81.182531] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 81.182768] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 81.182989] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 81.183321] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 81.183574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 81.183818] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 81.184060] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 81.185181] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 81.186194] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 81.186482] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 81.188977] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 81.193332] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 81.197979] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 81.198732] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 81.200780] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 81.200884] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 81.201288] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 81.201868] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 81.201907] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 81.202264] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 81.202714] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 81.202746] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 81.203040] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 81.203487] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 81.203514] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 81.203537] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 81.210897] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 81.213364] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 81.214372] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 81.214492] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 81.215627] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 81.215717] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 81.215802] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 81.215894] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 81.216196] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 81.216337] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 81.216499] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 81.216609] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 81.216708] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 81.216843] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 81.216955] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 81.217059] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 81.217212] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 81.217325] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 81.217430] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 81.217452] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 81.217512] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 81.218394] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 81.218976] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 81.219177] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 81.219334] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 81.219712] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 81.219720] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 81.219723] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 81.219725] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 81.219729] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 81.219731] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 81.219740] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 81.219742] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 81.219746] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 81.219777] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 81.219938] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 81.220717] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 81.220870] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 81.222282] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<7>[ 81.222765] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<5>[ 81.223147] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 81.223149] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 81.223151] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 81.223182] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 81.223196] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 81.223207] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 81.223217] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 81.223365] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 81.223377] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 81.223385] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 81.223517] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 81.223527] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 81.223536] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 81.223662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 81.223670] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 81.223673] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 81.223675] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 81.223677] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 81.223742] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 81.223754] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 81.223757] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 81.223759] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 81.223762] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 81.223770] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 81.223794] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 81.223831] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 81.230571] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d7a000
<6>[ 81.231325] fbcon: xedrmfb (fb0) is primary device
<7>[ 81.232089] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 81.232229] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 81.232346] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 81.232458] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 81.232561] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 81.232673] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 81.232786] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 81.232890] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 81.232977] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 81.233059] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 81.233189] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 81.233300] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 81.233406] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 81.233507] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 81.233598] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 81.233670] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 81.233742] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 81.233813] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 81.233887] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 81.233962] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 81.234034] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 81.234141] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 81.234227] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 81.234312] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 81.234389] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 81.234465] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 81.234545] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 81.234627] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 81.234705] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 81.234783] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 81.234863] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 81.234961] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 81.235036] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 81.235184] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 81.235297] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 81.235405] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 2, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 81.235507] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 49, 289, 289, 289, 265, 289, 0, 0, 63, 73, 87
<7>[ 81.235583] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 55, 319, 319, 319, 293, 319, 0, 0, 64, 82, 88
<7>[ 81.235655] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 81.235721] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.235783] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.235843] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.235906] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 81.235970] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236035] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236111] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236187] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 81.236260] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236333] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236404] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236476] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 81.236541] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236608] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236673] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236740] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 81.236809] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236877] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.236945] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 81.237014] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 81.237138] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 81.237255] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 81.237366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 81.237468] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 81.237548] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 81.237640] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 81.237743] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 81.237821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 81.237899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 81.237977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 81.238062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 81.238168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 81.238259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 81.238347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 81.238437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 81.238514] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 81.238585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 81.238658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 81.238733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 81.238807] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 81.238880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 81.238951] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 81.239022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 81.239100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 81.239180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 81.239258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 81.239337] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1905, vmax: 2859, pipeline full: 0, guardband: 106 flipline: 1906, vmin vblank: 1800, vmax vblank: 2753
<7>[ 81.239415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 81.239489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 81.239555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 81.239621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 81.239686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 81.239747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 81.239810] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 81.239872] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 81.239934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 81.240002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 81.240086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 81.240168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 81.240249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 81.240328] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 81.240406] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 81.240483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 81.240552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 81.240613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 81.240671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 81.240731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 81.240789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 81.240851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 81.240911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 81.240974] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 81.241040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 81.241123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 81.241203] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 81.241281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 81.241358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 81.241432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 81.241505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 81.263529] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 81.284499] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 81.284789] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 81.307818] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 81.465304] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 81.466668] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 81.472639] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 81.472935] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 81.473228] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 81.473577] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 81.473902] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 81.526304] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 81.526691] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 81.556052] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 81.556490] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 81.556454] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 81.557581] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 81.557589] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 81.557840] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 81.558126] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 81.558337] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 81.558541] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 81.558740] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 81.558966] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 81.559169] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 81.559353] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 81.559531] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 81.559705] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 81.559882] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 81.560081] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 81.560308] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 81.560514] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 81.561672] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 81.561947] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 81.562206] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 81.562464] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 81.562526] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 81.562761] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining)
<7>[ 81.710196] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 82.065234] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 82.145227] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 82.145553] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 82.145862] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 82.182386] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 82.182703] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 82.182985] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 82.183377] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 82.225847] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 82.225863] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 82.225984] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 82.474413] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 82.476723] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 82.477030] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 82.479751] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 82.481015] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 82.482161] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 82.483382] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 82.484549] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 82.485836] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 82.486164] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 82.487839] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 82.488156] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 82.488871] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 82.489410] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 82.489732] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 82.490100] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 82.492153] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 82.492173] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 82.492469] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 82.506941] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 82.509035] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 82.509441] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 82.510813] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 82.513259] Console: switching to colour frame buffer device 180x56
<6>[ 82.528646] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 82.545410] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 82.545584] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 82.545622] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 82.545718] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 82.545974] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 82.546168] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 82.546243] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 82.546206] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 82.546464] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 82.546672] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 82.546869] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 82.547120] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 82.547314] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 82.547355] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 82.547501] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 82.547691] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 82.547874] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 82.548109] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 82.548109] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 82.548297] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 82.548404] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 82.548497] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 82.548668] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 82.548695] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 82.548840] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 82.549018] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 82.549185] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 82.549201] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 82.549205] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.549209] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 82.549216] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.549221] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 82.549236] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.549240] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 82.549248] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.549283] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 82.549295] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 82.549476] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 82.549550] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 82.549668] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 82.549859] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 82.550046] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 82.550306] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 82.550622] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 82.550951] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 82.551616] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 82.552940] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 82.554096] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 82.554374] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 82.555830] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 82.555836] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 82.555839] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.555912] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 82.555943] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 82.555966] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 82.556038] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 82.556386] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 82.556665] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 82.556915] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 82.557207] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 82.557443] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 82.557468] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 82.557487] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 82.557726] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 82.557937] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 82.557957] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 82.557974] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 82.558234] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 82.558255] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 82.558425] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 82.558442] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 82.558451] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 82.558456] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 82.558461] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 82.558596] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 82.558620] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 82.558626] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 82.558632] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 82.558637] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 82.558663] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 82.563223] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 82.563484] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 82.575735] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<7>[ 82.589772] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 82.589797] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 82.590137] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 82.590157] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 82.591062] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 82.591933] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 82.592185] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 82.592407] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 82.592974] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 82.592989] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 82.592995] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.592997] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 82.593004] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.593009] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 82.593027] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.593029] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 82.593036] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.593092] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 82.593177] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 82.593954] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 82.594125] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 82.595916] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 82.595920] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 82.595922] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 82.595995] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 82.596031] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 82.596056] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 82.596102] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 82.596373] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 82.596398] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 82.596418] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 82.596656] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 82.596678] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 82.596697] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 82.596930] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 82.596955] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 82.596963] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 82.596968] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 82.596974] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 82.597171] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 82.597198] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 82.597204] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 82.597209] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 82.597215] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 82.597246] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 82.606664] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<7>[ 82.608452] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 82.608711] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 82.608900] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 82.611720] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 82.615535] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [xe])
<7>[ 82.615787] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 82.616312] xe 0000:00:02.0: [drm:i915_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 82.622171] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 82.622392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 82.639667] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 82.639765] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 82.639807] [IGT] xe_module_load: exiting, ret=0
<7>[ 82.651455] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 82.651624] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 82.651759] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 82.651890] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 82.652018] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 82.652151] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 82.652262] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 82.652370] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 82.652475] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 82.652576] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 82.652676] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 82.652778] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 82.652881] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 82.652984] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 82.653105] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 82.653225] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 82.653342] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 82.653458] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 82.653571] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 82.653685] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 82.653812] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 82.653943] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 82.654055] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 82.654181] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 82.654285] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 82.654388] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 82.654490] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 82.654591] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 82.654692] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 82.654793] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 82.654892] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 82.654992] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 82.655097] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 82.655197] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 82.655296] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 82.655393] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 82.657404] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 82.657565] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 82.657695] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 82.664137] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 82.667579] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 82.668255] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 82.671719] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 82.703453] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 82.703555] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 83.633163] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 83.633206] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 83.633221] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 83.787632] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 85.105634] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 85.105744] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<4>[ 90.854765] msr: Write to unrecognized MSR 0xe2 by wrmsr (pid: 1994).
<4>[ 90.854776] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.