<5>[ 0.000000] Linux version 6.12.0-xe (builder@lgci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Nov 19 13:44:36 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cb59fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cb5a000-0x000000006fed2fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fed3000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001043fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cc32000 MEMATTR=0x68eb9198 ESRT=0x690bea98 MOKvar=0x6cd66000
<6>[ 0.000000] efi: Remove mem266: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem268: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3222.D84.2410171025 10/17/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000012] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000015] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000016] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000364] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000365] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004203] esrt: Reserving ESRT space from 0x00000000690bea98 to 0x00000000690bebe8.
<7>[ 0.004210] e820: update [mem 0x690be000-0x690befff] usable ==> reserved
<6>[ 0.004230] Using GB pages for direct mapping
<6>[ 0.004868] printk: log_buf_len: 1048576 bytes
<6>[ 0.004869] printk: early log buf free: 258976(98%)
<6>[ 0.004869] Secure boot disabled
<6>[ 0.004871] ACPI: Early table checksum verification disabled
<6>[ 0.004873] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.004876] ACPI: XSDT 0x000000006FF7C228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004880] ACPI: FACP 0x000000006FFAB000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.004883] ACPI: DSDT 0x000000006FFB7000 02523C (v02 INTEL LNL 00000002 01000013)
<6>[ 0.004884] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.004886] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.004887] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.004888] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.004890] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.004891] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.004892] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.004894] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.004895] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.004896] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.004897] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.004899] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.004900] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.004901] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.004903] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.004904] ACPI: SSDT 0x000000006FFDE000 008EEA (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.004905] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.004907] ACPI: SSDT 0x000000006FFB2000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.004908] ACPI: SSDT 0x000000006FFB0000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.004909] ACPI: SSDT 0x000000006FFAC000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.004911] ACPI: HPET 0x000000006FFAA000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004912] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004913] ACPI: APIC 0x000000006FFA8000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.004914] ACPI: MCFG 0x000000006FFA7000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004916] ACPI: SSDT 0x000000006FFA6000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.004917] ACPI: SSDT 0x000000006FFA0000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.004918] ACPI: SSDT 0x000000006FF95000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.004919] ACPI: LPIT 0x000000006FF94000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004921] ACPI: SSDT 0x000000006FF93000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.004922] ACPI: SSDT 0x000000006FF92000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.004923] ACPI: DBGP 0x000000006FF91000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004924] ACPI: DBG2 0x000000006FF90000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004926] ACPI: NHLT 0x000000006FF8F000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004927] ACPI: SSDT 0x000000006FF8D000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.004928] ACPI: SSDT 0x000000006FF86000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.004929] ACPI: ECDT 0x000000006FF85000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.004931] ACPI: DMAR 0x000000006FF84000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004932] ACPI: FPDT 0x000000006FF83000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004933] ACPI: SSDT 0x000000006FF82000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.004935] ACPI: SSDT 0x000000006FF80000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.004936] ACPI: SSDT 0x000000006FF7D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.004937] ACPI: SDEV 0x000000006FFA9000 000046 (v01 00000000 00000000)
<6>[ 0.004939] ACPI: SSDT 0x000000006FF71000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.004940] ACPI: SSDT 0x000000006FF63000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.004941] ACPI: ASF! 0x000000006FF62000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.004943] ACPI: PHAT 0x000000006FF61000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.004944] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004945] ACPI: Reserving FACP table memory at [mem 0x6ffab000-0x6ffab113]
<6>[ 0.004946] ACPI: Reserving DSDT table memory at [mem 0x6ffb7000-0x6ffdc23b]
<6>[ 0.004946] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.004947] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.004947] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.004947] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.004947] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.004948] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.004948] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.004948] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.004949] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.004949] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.004949] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.004949] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.004950] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.004950] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.004950] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.004951] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6ee9]
<6>[ 0.004951] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.004951] ACPI: Reserving SSDT table memory at [mem 0x6ffb2000-0x6ffb6ac2]
<6>[ 0.004951] ACPI: Reserving SSDT table memory at [mem 0x6ffb0000-0x6ffb140e]
<6>[ 0.004952] ACPI: Reserving SSDT table memory at [mem 0x6ffac000-0x6ffaf955]
<6>[ 0.004952] ACPI: Reserving HPET table memory at [mem 0x6ffaa000-0x6ffaa037]
<6>[ 0.004952] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.004953] ACPI: Reserving APIC table memory at [mem 0x6ffa8000-0x6ffa80d7]
<6>[ 0.004953] ACPI: Reserving MCFG table memory at [mem 0x6ffa7000-0x6ffa703b]
<6>[ 0.004953] ACPI: Reserving SSDT table memory at [mem 0x6ffa6000-0x6ffa66e2]
<6>[ 0.004953] ACPI: Reserving SSDT table memory at [mem 0x6ffa0000-0x6ffa5320]
<6>[ 0.004954] ACPI: Reserving SSDT table memory at [mem 0x6ff95000-0x6ff9f469]
<6>[ 0.004954] ACPI: Reserving LPIT table memory at [mem 0x6ff94000-0x6ff940cb]
<6>[ 0.004954] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff93d5b]
<6>[ 0.004955] ACPI: Reserving SSDT table memory at [mem 0x6ff92000-0x6ff921ef]
<6>[ 0.004955] ACPI: Reserving DBGP table memory at [mem 0x6ff91000-0x6ff91033]
<6>[ 0.004955] ACPI: Reserving DBG2 table memory at [mem 0x6ff90000-0x6ff90053]
<6>[ 0.004955] ACPI: Reserving NHLT table memory at [mem 0x6ff8f000-0x6ff8f2e2]
<6>[ 0.004956] ACPI: Reserving SSDT table memory at [mem 0x6ff8d000-0x6ff8e15b]
<6>[ 0.004956] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff8c53a]
<6>[ 0.004956] ACPI: Reserving ECDT table memory at [mem 0x6ff85000-0x6ff85068]
<6>[ 0.004957] ACPI: Reserving DMAR table memory at [mem 0x6ff84000-0x6ff840d7]
<6>[ 0.004957] ACPI: Reserving FPDT table memory at [mem 0x6ff83000-0x6ff83043]
<6>[ 0.004957] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff8286c]
<6>[ 0.004957] ACPI: Reserving SSDT table memory at [mem 0x6ff80000-0x6ff81121]
<6>[ 0.004958] ACPI: Reserving SSDT table memory at [mem 0x6ff7d000-0x6ff7f462]
<6>[ 0.004958] ACPI: Reserving SDEV table memory at [mem 0x6ffa9000-0x6ffa9045]
<6>[ 0.004958] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff7b4f9]
<6>[ 0.004959] ACPI: Reserving SSDT table memory at [mem 0x6ff63000-0x6ff70815]
<6>[ 0.004959] ACPI: Reserving ASF! table memory at [mem 0x6ff62000-0x6ff62073]
<6>[ 0.004959] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff616df]
<6>[ 0.004960] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037]
<6>[ 0.005022] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005224] No NUMA configuration found
<6>[ 0.005224] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005228] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005340] Zone ranges:
<6>[ 0.005340] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005341] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005342] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005343] Device empty
<6>[ 0.005343] Movable zone start for each node
<6>[ 0.005344] Early memory node ranges
<6>[ 0.005344] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005345] node 0: [mem 0x0000000000100000-0x000000006cb59fff]
<6>[ 0.005345] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005346] node 0: [mem 0x0000000104400000-0x000000087f7fffff]
<6>[ 0.005347] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005352] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005369] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007387] On node 0, zone DMA32: 13477 pages in unavailable ranges
<6>[ 0.035879] On node 0, zone Normal: 17408 pages in unavailable ranges
<6>[ 0.035946] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036424] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036431] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.036482] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.036483] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.036485] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.036487] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.036488] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.036498] e820: update [mem 0x69064000-0x6907efff] usable ==> reserved
<6>[ 0.036504] TSC deadline timer available
<6>[ 0.036506] CPU topo: Max. logical packages: 1
<6>[ 0.036506] CPU topo: Max. logical dies: 1
<6>[ 0.036507] CPU topo: Max. dies per package: 1
<6>[ 0.036508] CPU topo: Max. threads per core: 1
<6>[ 0.036509] CPU topo: Num. cores per package: 8
<6>[ 0.036509] CPU topo: Num. threads per package: 8
<6>[ 0.036509] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.036522] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.036523] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.036524] PM: hibernation: Registered nosave memory: [mem 0x69064000-0x6907efff]
<6>[ 0.036525] PM: hibernation: Registered nosave memory: [mem 0x690be000-0x690befff]
<6>[ 0.036526] PM: hibernation: Registered nosave memory: [mem 0x6cb5a000-0x6fed2fff]
<6>[ 0.036526] PM: hibernation: Registered nosave memory: [mem 0x6fed3000-0x6ff4ffff]
<6>[ 0.036526] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.036527] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.036527] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.036528] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.036528] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.036528] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1043fffff]
<6>[ 0.036530] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.036530] Booting paravirtualized kernel on bare hardware
<6>[ 0.036532] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.036540] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.036884] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.036888] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.036890] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.036902] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<5>[ 0.036972] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.036986] random: crng init done
<6>[ 0.038834] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.039739] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.039795] Fallback order for Node 0: 0
<6>[ 0.039798] Built 1 zonelists, mobility grouping on. Total pages: 8290041
<6>[ 0.039798] Policy zone: Normal
<6>[ 0.039807] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.039808] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.039810] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.040757] software IO TLB: area num 8.
<4>[ 0.085880] **********************************************************
<4>[ 0.085881] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085881] ** **
<4>[ 0.085882] ** This system shows unhashed kernel memory addresses **
<4>[ 0.085882] ** via the console, logs, and other interfaces. This **
<4>[ 0.085882] ** might reduce the security of your system. **
<4>[ 0.085882] ** **
<4>[ 0.085883] ** If you see this message and you are not debugging **
<4>[ 0.085883] ** the kernel, report this immediately to your system **
<4>[ 0.085883] ** administrator! **
<4>[ 0.085883] ** **
<4>[ 0.085883] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085883] **********************************************************
<6>[ 0.086971] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.087291] ftrace: allocating 59411 entries in 233 pages
<6>[ 0.094340] ftrace: allocated 233 pages with 5 groups
<6>[ 0.095578] Dynamic Preempt: voluntary
<6>[ 0.096047] Running RCU self tests
<6>[ 0.096048] Running RCU synchronous self tests
<6>[ 0.096055] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.096055] rcu: RCU lockdep checking is enabled.
<6>[ 0.096056] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.096056] Trampoline variant of Tasks RCU enabled.
<6>[ 0.096056] Rude variant of Tasks RCU enabled.
<6>[ 0.096057] Tracing variant of Tasks RCU enabled.
<6>[ 0.096057] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.096057] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.096098] Running RCU synchronous self tests
<6>[ 0.096104] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.096107] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.096109] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.106314] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.106775] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.107114] Console: colour dummy device 80x25
<6>[ 0.107123] printk: legacy console [tty0] enabled
<4>[ 0.108377] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>[ 0.108385] ... MAX_LOCKDEP_SUBCLASSES: 8
<4>[ 0.108388] ... MAX_LOCK_DEPTH: 48
<4>[ 0.108392] ... MAX_LOCKDEP_KEYS: 8192
<4>[ 0.108396] ... CLASSHASH_SIZE: 4096
<4>[ 0.108399] ... MAX_LOCKDEP_ENTRIES: 524288
<4>[ 0.108403] ... MAX_LOCKDEP_CHAINS: 524288
<4>[ 0.108407] ... CHAINHASH_SIZE: 262144
<4>[ 0.108411] memory used by lock dependency info: 54145 kB
<4>[ 0.108415] memory used for stack traces: 4224 kB
<4>[ 0.108419] per task-struct memory footprint: 1920 bytes
<6>[ 0.108470] ACPI: Core revision 20240827
<6>[ 0.109382] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.109447] APIC: Switch to symmetric I/O mode setup
<6>[ 0.109452] DMAR: Host address width 38
<6>[ 0.109456] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.109487] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.109520] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.109542] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.109568] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.109590] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.109624] DMAR: SATC flags: 0x1
<6>[ 0.109632] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.109638] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.109642] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.111703] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.116904] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.116924] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.116997] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.117004] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.117184] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.117189] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.117197] process: using mwait in idle threads
<6>[ 0.117205] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.117213] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.117217] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.117225] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.117232] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.117247] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.117254] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.117259] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.117264] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.117270] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.117276] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.117281] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.117286] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.117292] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.117918] Freeing SMP alternatives memory: 48K
<6>[ 0.117918] pid_max: default: 32768 minimum: 301
<6>[ 0.117918] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.117918] landlock: Up and running.
<6>[ 0.117918] Yama: becoming mindful.
<6>[ 0.117918] AppArmor: AppArmor initialized
<6>[ 0.117918] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.117918] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.117918] Running RCU synchronous self tests
<6>[ 0.117918] Running RCU synchronous self tests
<6>[ 0.117918] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.117918] Running RCU Tasks wait API self tests
<6>[ 0.117918] Running RCU Tasks Rude wait API self tests
<6>[ 0.117918] Running RCU Tasks Trace wait API self tests
<6>[ 0.117918] Performance Events: XSAVE Architectural LBR, no PEBS fmt6+, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.117918] core: cpu_core PMU driver:
<6>[ 0.117918] ... version: 6
<6>[ 0.117918] ... bit width: 48
<6>[ 0.117923] ... generic registers: 10
<6>[ 0.117926] ... value mask: 0000ffffffffffff
<6>[ 0.117931] ... max period: 00007fffffffffff
<6>[ 0.117935] ... fixed-purpose events: 4
<6>[ 0.117939] ... event mask: 0001000f000003ff
<6>[ 0.117969] signal: max sigframe size: 3632
<6>[ 0.117991] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.118075] rcu: Hierarchical SRCU implementation.
<6>[ 0.118079] rcu: Max phase no-delay instances is 400.
<6>[ 0.118206] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.120628] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.120887] smp: Bringing up secondary CPUs ...
<6>[ 0.121240] smpboot: x86: Booting SMP configuration:
<6>[ 0.121247] .... node #0, CPUs: #1 #2
<6>[ 0.124046] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.127465] #3 #4 #5 #6 #7
<6>[ 0.010958] core: cpu_atom PMU driver:
<6>[ 0.010958] ... version: 6
<6>[ 0.010958] ... bit width: 48
<6>[ 0.010958] ... generic registers: 8
<6>[ 0.010958] ... value mask: 0000ffffffffffff
<6>[ 0.010958] ... max period: 00007fffffffffff
<6>[ 0.010958] ... fixed-purpose events: 6
<6>[ 0.010958] ... event mask: 00000077000000ff
<6>[ 0.137037] smp: Brought up 1 node, 8 CPUs
<6>[ 0.137037] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.139051] Memory: 32362556K/33160164K available (24576K kernel code, 5564K rwdata, 9208K rodata, 5596K init, 68448K bss, 775232K reserved, 0K cma-reserved)
<6>[ 0.139922] devtmpfs: initialized
<6>[ 0.140117] x86/mm: Memory block size: 128MB
<6>[ 0.156023] ACPI: PM: Registering ACPI NVS region [mem 0x6fed3000-0x6ff4ffff] (512000 bytes)
<6>[ 0.156301] Running RCU synchronous self tests
<6>[ 0.156313] Running RCU synchronous self tests
<6>[ 0.156329] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.156329] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.157075] pinctrl core: initialized pinctrl subsystem
<6>[ 0.157569] PM: RTC time: 23:46:34, date: 2024-11-19
<6>[ 0.158471] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.159435] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.159724] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.160010] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.160075] audit: initializing netlink subsys (disabled)
<5>[ 0.160206] audit: type=2000 audit(1732059994.043:1): state=initialized audit_enabled=0 res=1
<6>[ 0.161197] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.161199] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.161206] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.161210] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.161215] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.161260] EISA bus registered
<6>[ 0.161287] cpuidle: using governor ladder
<6>[ 0.161287] cpuidle: using governor menu
<6>[ 0.161287] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.161994] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.162023] PCI: Using configuration type 1 for base access
<6>[ 0.162171] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.163930] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.163938] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.163944] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.163951] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.182920] raid6: avx2x4 gen() 64760 MB/s
<6>[ 0.199920] raid6: avx2x2 gen() 88513 MB/s
<6>[ 0.216919] raid6: avx2x1 gen() 76831 MB/s
<6>[ 0.216923] raid6: using algorithm avx2x2 gen() 88513 MB/s
<6>[ 0.233920] raid6: .... xor() 57838 MB/s, rmw enabled
<6>[ 0.233924] raid6: using avx2x2 recovery algorithm
<6>[ 0.234357] fbcon: Taking over console
<6>[ 0.234488] ACPI: Added _OSI(Module Device)
<6>[ 0.234492] ACPI: Added _OSI(Processor Device)
<6>[ 0.234496] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.234500] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.886717] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.926467] ACPI: EC: EC started
<6>[ 0.926494] ACPI: EC: interrupt blocked
<6>[ 0.934186] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.934201] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.992288] Callback from call_rcu_tasks() invoked.
<6>[ 1.233327] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.233352] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.317549] ACPI: Interpreter enabled
<6>[ 1.317800] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.317813] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.326709] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.326729] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.350333] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.350383] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.438659] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.439461] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.448361] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.772723] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.786073] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.941541] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.943241] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.951739] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.961177] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.961427] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.961668] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 2.027918] ACPI: \: Can't tag data node
<3>[ 2.030402] ACPI: \: Can't tag data node
<3>[ 2.032824] ACPI: \: Can't tag data node
<3>[ 2.034979] ACPI: \: Can't tag data node
<3>[ 2.036683] ACPI: \: Can't tag data node
<6>[ 2.193674] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.194196] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.194689] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.195213] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.195705] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.197154] ACPI: \PIN_: New power resource
<6>[ 2.200767] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.200783] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.203700] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 2.208712] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 2.218180] PCI host bridge to bus 0000:00
<6>[ 2.218212] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.218220] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.218226] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.218234] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.218241] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.218249] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.221616] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.222199] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.222252] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.222292] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.222341] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.222385] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.223612] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.223629] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 2.225151] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.225168] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.225185] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 2.226000] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.226047] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.226059] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.226077] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.226308] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.226370] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.230643] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.230698] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.230710] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.230728] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.230928] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.230983] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.235248] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.235301] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.235313] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.235331] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.235539] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.235595] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.255342] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.255396] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 2.255463] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.255463] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.255463] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.255463] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 2.255929] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.255929] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 2.256929] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.261025] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.261084] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 2.261124] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 2.261289] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.261301] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.266665] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.266731] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 2.266773] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 2.266953] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.266965] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.270674] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.270732] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 2.270922] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.278681] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.278763] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 2.279025] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.280260] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.280323] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 2.280539] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.286244] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.286302] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 2.286342] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 2.287090] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.287229] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.291286] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.291426] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.295506] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.295676] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.299717] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.299888] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.303388] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.303482] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 2.303791] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.310790] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.310845] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 2.310876] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 2.311811] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.311889] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.311908] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.311926] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.312161] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.312251] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.328527] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.329187] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.329350] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.330961] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.331452] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.345533] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.349382] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.349490] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 2.349616] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 2.349874] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.350975] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.351058] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 2.351137] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.354887] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.354997] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.355746] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.355812] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.356109] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.359721] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.360863] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.361244] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.361660] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.361710] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.361764] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.361805] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.362099] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.362111] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.363353] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.365055] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.365723] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.365778] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.367226] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.367341] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.809735] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 13.306261] Low-power S0 idle used by default for system suspend
<6>[ 13.359788] ACPI: EC: interrupt unblocked
<6>[ 13.359800] ACPI: EC: event unblocked
<6>[ 13.359835] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 13.359841] ACPI: EC: GPE=0x6e
<6>[ 13.359847] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 13.359856] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 13.360347] iommu: Default domain type: Translated
<6>[ 13.360347] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 13.363395] SCSI subsystem initialized
<7>[ 13.363969] libata version 3.00 loaded.
<6>[ 13.364232] ACPI: bus type USB registered
<6>[ 13.364411] usbcore: registered new interface driver usbfs
<6>[ 13.364499] usbcore: registered new interface driver hub
<6>[ 13.364601] usbcore: registered new device driver usb
<6>[ 13.364905] pps_core: LinuxPPS API ver. 1 registered
<6>[ 13.364917] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 13.364958] PTP clock support registered
<6>[ 13.366182] EDAC MC: Ver: 3.0.0
<6>[ 13.368116] efivars: Registered efivars operations
<6>[ 13.371542] NetLabel: Initializing
<6>[ 13.371553] NetLabel: domain hash size = 128
<6>[ 13.371564] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 13.371742] NetLabel: unlabeled traffic allowed by default
<6>[ 13.371786] mctp: management component transport protocol core
<6>[ 13.371799] NET: Registered PF_MCTP protocol family
<6>[ 13.371878] PCI: Using ACPI for IRQ routing
<7>[ 13.434647] PCI: pci_cache_line_size set to 64 bytes
<6>[ 13.434947] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 13.435183] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 13.435203] e820: reserve RAM buffer [mem 0x69064000-0x6bffffff]
<7>[ 13.435211] e820: reserve RAM buffer [mem 0x690be000-0x6bffffff]
<7>[ 13.435218] e820: reserve RAM buffer [mem 0x6cb5a000-0x6fffffff]
<7>[ 13.435225] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 13.436447] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 13.436447] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 13.436447] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 13.436447] vgaarb: loaded
<6>[ 13.437378] clocksource: Switched to clocksource tsc-early
<5>[ 13.452568] VFS: Disk quotas dquot_6.6.0
<6>[ 13.452635] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 13.454859] AppArmor: AppArmor Filesystem Enabled
<6>[ 13.455274] pnp: PnP ACPI init
<6>[ 13.457530] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 13.457558] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 13.461198] system 00:02: [io 0x06a4] has been reserved
<6>[ 13.461224] system 00:02: [io 0x06a0] has been reserved
<6>[ 13.519890] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 13.519919] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 13.519949] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 13.520060] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 13.520083] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 13.520110] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 13.520137] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 13.520160] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 13.526088] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 13.528619] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 13.528816] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 13.533886] pnp: PnP ACPI: found 8 devices
<6>[ 13.553008] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 13.553687] NET: Registered PF_INET protocol family
<6>[ 13.553877] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.555766] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 13.555910] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 13.556071] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.556893] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 13.558277] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 13.558723] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 13.559386] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 13.560121] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 13.560193] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 13.560204] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 13.560213] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 13.560265] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 13.560271] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 13.560276] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 13.560282] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 13.560331] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 13.560377] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 13.560423] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 13.560471] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 13.560501] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 13.560512] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 13.560521] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 13.560529] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.560541] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 13.560547] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 13.560559] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 13.560567] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.560579] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 13.560585] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 13.560594] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 13.560602] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.560614] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 13.560619] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 13.560627] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 13.560640] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 13.560675] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 13.560721] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 13.560727] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 13.560731] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 13.560736] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 13.560742] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 13.560747] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 13.560752] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 13.560756] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.560762] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 13.560766] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 13.560771] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.560777] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 13.560781] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 13.560786] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.560791] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 13.560796] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 13.560801] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 13.561709] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 13.563171] PCI: CLS 0 bytes, default 64
<6>[ 13.563264] DMAR: No RMRR found
<6>[ 13.563277] DMAR: No ATSR found
<6>[ 13.563281] DMAR: IOMMU feature nwfs inconsistent
<6>[ 13.563303] DMAR: IOMMU feature dit inconsistent
<6>[ 13.563320] DMAR: IOMMU feature sc_support inconsistent
<6>[ 13.563324] DMAR: IOMMU feature dev_iotlb_support inconsistent
<6>[ 13.563328] DMAR: dmar1: Using Queued invalidation
<6>[ 13.563371] DMAR: dmar0: Using Queued invalidation
<6>[ 13.563378] DMAR: dmar2: Using Queued invalidation
<6>[ 13.564492] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 13.564569] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 13.564626] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 13.564677] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 13.567584] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 13.568842] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 13.568901] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 13.568966] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 13.569025] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 13.569111] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 13.569151] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 13.569186] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 13.569241] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 13.569297] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 13.569360] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 13.569395] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 13.569475] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 13.569511] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 13.569547] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 13.569586] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 13.569650] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 13.569690] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 13.569736] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 13.569809] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 13.569899] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 13.569938] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 13.569982] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 13.570021] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 13.570060] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 13.570112] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 13.570184] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 13.578673] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 13.578681] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 13.578685] software IO TLB: mapped [mem 0x0000000063b5b000-0x0000000067b5b000] (64MB)
<6>[ 13.590706] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 13.590907] clocksource: Switched to clocksource tsc
<6>[ 13.591651] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 13.625240] Initialise system trusted keyrings
<5>[ 13.625703] Key type blacklist registered
<6>[ 13.626640] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 13.692709] zbud: loaded
<6>[ 13.700122] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 13.700828] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 13.700875] ntfs3: Read-only LZX/Xpress compression included
<5>[ 13.703028] integrity: Platform Keyring initialized
<5>[ 13.703154] integrity: Machine keyring initialized
<6>[ 13.737759] xor: automatically using best checksumming function avx
<5>[ 13.737765] Key type asymmetric registered
<5>[ 13.737772] Asymmetric key parser 'x509' registered
<6>[ 13.737846] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 13.738325] io scheduler mq-deadline registered
<6>[ 13.739659] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 13.740645] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 13.740749] pcieport 0000:00:07.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 13.742409] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 13.742499] pcieport 0000:00:07.1: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 13.743847] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 13.743924] pcieport 0000:00:07.2: pciehp: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 13.745213] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 13.746169] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 13.746584] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 13.748211] Monitor-Mwait will be used to enter C-1 state
<7>[ 13.748218] Monitor-Mwait will be used to enter C-2 state
<7>[ 13.748221] Monitor-Mwait will be used to enter C-3 state
<6>[ 13.755830] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 13.755948] ACPI: button: Lid Switch [LID0]
<6>[ 13.756102] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 13.756200] ACPI: button: Sleep Button [SLPB]
<6>[ 13.756329] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 13.756486] ACPI: button: Power Button [PWRB]
<6>[ 13.917847] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 13.917933] ACPI: thermal: Thermal Zone [TZ00] (53 C)
<6>[ 13.920786] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 13.921664] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 13.924894] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 13.946257] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 13.967113] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 13.968165] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 13.991037] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 13.996177] hpet_acpi_add: no address or irqs in _CRS
<6>[ 13.996549] Linux agpgart interface v0.103
<6>[ 13.996975] ACPI: bus type drm_connector registered
<6>[ 14.019202] loop: module loaded
<6>[ 14.081046] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 14.220080] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 14.350979] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 14.480976] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 14.605574] Key type psk registered
<6>[ 14.609178] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 14.609753] nvme nvme0: pci function 0000:80:00.0
<6>[ 14.609953] tun: Universal TUN/TAP device driver, 1.6
<6>[ 14.610782] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.610876] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 14.612911] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.615174] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.615204] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 14.615225] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.615650] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 14.615675] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.615686] usb usb1: Product: xHCI Host Controller
<6>[ 14.615693] usb usb1: Manufacturer: Linux 6.12.0-xe xhci-hcd
<6>[ 14.615702] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 14.617351] hub 1-0:1.0: USB hub found
<6>[ 14.617446] hub 1-0:1.0: 1 port detected
<6>[ 14.621509] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 14.621529] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.621540] usb usb2: Product: xHCI Host Controller
<6>[ 14.621547] usb usb2: Manufacturer: Linux 6.12.0-xe xhci-hcd
<6>[ 14.621555] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 14.622266] hub 2-0:1.0: USB hub found
<6>[ 14.622319] hub 2-0:1.0: 3 ports detected
<6>[ 14.645079] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 14.648041] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.648082] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 14.649846] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.651624] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.651646] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 14.651664] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.651873] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 14.651887] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.651897] usb usb3: Product: xHCI Host Controller
<6>[ 14.651905] usb usb3: Manufacturer: Linux 6.12.0-xe xhci-hcd
<6>[ 14.651913] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 14.652639] hub 3-0:1.0: USB hub found
<6>[ 14.652687] hub 3-0:1.0: 8 ports detected
<6>[ 14.683477] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 14.683499] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.683510] usb usb4: Product: xHCI Host Controller
<6>[ 14.683517] usb usb4: Manufacturer: Linux 6.12.0-xe xhci-hcd
<6>[ 14.683526] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 14.684204] hub 4-0:1.0: USB hub found
<6>[ 14.684256] hub 4-0:1.0: 2 ports detected
<6>[ 14.691896] usbcore: registered new interface driver usb-storage
<6>[ 14.692061] usbcore: registered new interface driver usbserial_generic
<6>[ 14.692205] usbserial: USB Serial support registered for generic
<6>[ 14.692267] usbcore: registered new interface driver ftdi_sio
<6>[ 14.692303] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 14.692357] usbcore: registered new interface driver pl2303
<6>[ 14.692397] usbserial: USB Serial support registered for pl2303
<6>[ 14.692526] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 14.692536] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 15.403560] i8042: Can't read CTR while initializing i8042
<3>[ 15.403572] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 15.403979] mousedev: PS/2 mouse device common for all mice
<6>[ 15.404839] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 15.406662] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 15.406881] rtc_cmos rtc_cmos: setting system clock to 2024-11-19T23:46:50 UTC (1732060010)
<6>[ 15.407054] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 15.407114] i2c_dev: i2c /dev entries driver
<6>[ 16.137513] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 16.137543] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 16.137561] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 16.137619] device-mapper: uevent: version 1.0.3
<6>[ 16.138117] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 16.138343] platform eisa.0: Probing EISA bus 0
<4>[ 16.138365] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 16.138391] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 16.138413] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 16.138432] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 16.138451] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 16.138471] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 16.138490] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 16.138509] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 16.138528] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 16.138544] platform eisa.0: EISA: Detected 0 cards
<6>[ 16.138560] intel_pstate: Intel P-state driver initializing
<6>[ 16.144984] Hybrid CPU capacity scaling enabled
<6>[ 16.147957] intel_pstate: HWP enabled
<6>[ 16.148069] sdhci: Secure Digital Host Controller Interface driver
<6>[ 16.148085] sdhci: Copyright(c) Pierre Ossman
<6>[ 16.148341] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 16.153223] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<7>[ 16.153947] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] display mode={"": 60 311040 2880 2880 2880 2880 1800 1800 1800 1800 0x40 0x0}
<7>[ 16.153969] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] framebuffer format=XR24 little-endian (0x34325258), size=2880x1800, stride=11520 byte
<7>[ 16.154010] simple-framebuffer simple-framebuffer.0: [drm:simpledrm_probe] using I/O memory framebuffer at [mem 0x2000800000-0x2001bc6fff flags 0x200]
<7>[ 16.154329] simple-framebuffer simple-framebuffer.0: [drm:drm_fb_build_fourcc_list] adding native format XR24 little-endian (0x34325258)
<7>[ 16.154900] simple-framebuffer simple-framebuffer.0: [drm:drm_sysfs_connector_add] [CONNECTOR:36:Unknown-1] adding connector to sysfs
<7>[ 16.155501] simple-framebuffer simple-framebuffer.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:36:Unknown-1] generating connector hotplug event
<6>[ 16.155534] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
<7>[ 16.155593] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe]
<7>[ 16.155657] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1]
<7>[ 16.155664] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1] status updated from unknown to connected
<7>[ 16.155694] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:36:Unknown-1] probed modes:
<7>[ 16.155698] simple-framebuffer simple-framebuffer.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 311040 2880 2880 2880 2880 1800 1800 1800 1800 0x48 0x0
<7>[ 16.155701] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] enabled? yes
<7>[ 16.155719] simple-framebuffer simple-framebuffer.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 16.155726] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] looking for cmdline mode
<7>[ 16.155728] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] looking for preferred mode, tile 0
<7>[ 16.155731] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CONNECTOR:36:Unknown-1] Found mode 2880x1800
<7>[ 16.155733] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] picking CRTCs for 4096x4096 config
<7>[ 16.155743] simple-framebuffer simple-framebuffer.0: [drm:drm_client_modeset_probe] [CRTC:34:crtc-0] desired mode 2880x1800 set (0,0)
<7>[ 16.155762] simple-framebuffer simple-framebuffer.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7>[ 16.155769] simple-framebuffer simple-framebuffer.0: [drm:drm_fbdev_shmem_driver_fbdev_probe] surface width(2880), height(1800) and bpp(32)
<7>[ 16.155874] simple-framebuffer simple-framebuffer.0: [drm:drm_mode_addfb2] [FB:37]
<6>[ 16.156188] nvme0n1: p1 p2
<6>[ 16.174700] Console: switching to colour frame buffer device 180x56
<6>[ 16.182986] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
<6>[ 16.184493] drop_monitor: Initializing network drop monitor service
<6>[ 16.184857] NET: Registered PF_INET6 protocol family
<6>[ 16.189287] Segment Routing with IPv6
<6>[ 16.189403] In-situ OAM (IOAM) with IPv6
<6>[ 16.189493] NET: Registered PF_PACKET protocol family
<5>[ 16.189888] Key type dns_resolver registered
<4>[ 16.193724] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 16.194263] microcode: Current revision: 0x00000116
<6>[ 16.195294] IPI shorthand broadcast: enabled
<6>[ 16.211464] sched_clock: Marking stable (16201001252, 9958036)->(16299650644, -88691356)
<6>[ 16.214334] registered taskstats version 1
<5>[ 16.216871] Loading compiled-in X.509 certificates
<6>[ 16.253586] Demotion targets for Node 0: null
<6>[ 16.254160] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946)
<6>[ 16.254165] kmemleak: Automatic memory scanning thread started
<5>[ 16.254673] Key type .fscrypt registered
<5>[ 16.254837] Key type fscrypt-provisioning registered
<6>[ 16.257544] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 16.260475] Key type encrypted registered
<6>[ 16.260662] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 16.260998] ima: No TPM chip found, activating TPM-bypass!
<5>[ 16.261191] Loading compiled-in module X.509 certificates
<5>[ 16.262109] Loaded X.509 cert 'Build time autogenerated kernel key: f6b4f5487b99dace792ee05af626f5f61a0d8013'
<6>[ 16.262338] ima: Allocated hash algorithm: sha256
<6>[ 16.262589] ima: No architecture policies found
<6>[ 16.262864] evm: Initialising EVM extended attributes:
<6>[ 16.262877] evm: security.selinux
<6>[ 16.262887] evm: security.SMACK64
<6>[ 16.262897] evm: security.SMACK64EXEC
<6>[ 16.262907] evm: security.SMACK64TRANSMUTE
<6>[ 16.263476] evm: security.SMACK64MMAP
<6>[ 16.263877] evm: security.apparmor
<6>[ 16.264364] evm: security.ima
<6>[ 16.264706] evm: security.capability
<6>[ 16.265083] evm: HMAC attrs: 0x1
<6>[ 16.269710] PM: Magic number: 0:138:808
<6>[ 16.270584] acpi PNP0A05:00: hash matches
<6>[ 16.271224] printk: legacy console [netcon0] enabled
<6>[ 16.271639] netconsole: network logging started
<6>[ 16.273012] RAS: Correctable Errors collector initialized.
<6>[ 16.274040] clk: Disabling unused clocks
<6>[ 16.274896] PM: genpd: Disabling unused power domains
<6>[ 16.276294] md: Waiting for all devices to be available before autodetect
<6>[ 16.277099] md: If you don't use raid, use raid=noautodetect
<6>[ 16.277911] md: Autodetecting RAID arrays.
<6>[ 16.278862] md: autorun ...
<6>[ 16.279749] md: ... autorun DONE.
<6>[ 16.322264] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none.
<6>[ 16.327600] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 16.329160] devtmpfs: mounted
<6>[ 16.340636] Freeing unused decrypted memory: 2028K
<6>[ 16.341923] Freeing unused kernel image (initmem) memory: 5596K
<6>[ 16.342517] Write protecting the kernel read-only data: 34816k
<6>[ 16.347728] Freeing unused kernel image (rodata/data gap) memory: 1032K
<6>[ 16.352528] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 16.355675] Run /sbin/init as init process
<7>[ 16.356541] with arguments:
<7>[ 16.356544] /sbin/init
<7>[ 16.356545] with environment:
<7>[ 16.356546] HOME=/
<7>[ 16.356546] TERM=linux
<7>[ 16.356547] BOOT_IMAGE=/boot/drm_intel
<3>[ 16.399965] systemd[1]: Failed to find module 'autofs4'
<7>[ 16.423763] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 16.429122] systemd[1]: Detected architecture x86-64.
<7>[ 16.435612] systemd[1]: Hostname set to <shard-lnl-4>.
<7>[ 16.606326] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 16.610909] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 16.672791] systemd[1]: Queued start job for default target graphical.target.
<7>[ 16.712468] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 16.723797] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 16.728514] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 16.731679] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 16.734681] systemd[1]: Starting of proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point unsupported.
<7>[ 16.737787] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61...
<7>[ 16.740933] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 16.744386] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 16.747585] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 16.750890] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 16.754427] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 16.758406] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 16.763163] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 16.766885] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 16.771108] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 16.775135] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 16.779143] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 16.783193] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 16.787267] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 16.791152] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 16.794772] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.797008] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 16.800569] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 16.827398] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 16.838024] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 16.846101] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 16.853815] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 16.865101] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 16.874464] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 16.882220] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 16.891516] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 16.896072] systemd-journald[214]: Collecting audit messages is disabled.
<7>[ 16.899425] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 16.908379] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 16.917519] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 16.926448] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 16.933316] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 16.941852] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<6>[ 16.949107] pstore: Using crash dump compression: deflate
<7>[ 16.949911] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<6>[ 16.954156] pstore: Registered efi_pstore as persistent store backend
<7>[ 16.958143] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 16.963941] fuse: init (API version 7.41)
<7>[ 16.968292] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 16.977844] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 16.981374] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.983105] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.989651] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 17.000846] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 17.191412] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. Quota mode: none.
<6>[ 17.240322] Adding 8388604k swap on /swap.img. Priority:-2 extents:65 across:341704704k SS
<7>[ 17.269764] systemd-journald[214]: Received client request to flush runtime journal.
<7>[ 17.288918] systemd-journald[214]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 17.288937] systemd-journald[214]: Rotating system journal.
<6>[ 18.102226] Consider using thermal netlink events interface
<6>[ 18.121912] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 18.138600] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<6>[ 18.163133] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 18.168187] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 18.173691] pci 0000:00:05.0: Setting to D3hot
<6>[ 18.176134] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 18.185033] pci 0000:00:0b.0: Setting to D3hot
<4>[ 18.197073] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 18.197304] intel_pmc_core INT33A1:00: initialized
<3>[ 18.289636] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 18.313758] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<5>[ 18.322283] audit: type=1400 audit(1732060013.413:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=441 comm="apparmor_parser"
<5>[ 18.325356] audit: type=1400 audit(1732060013.417:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=440 comm="apparmor_parser"
<5>[ 18.325660] audit: type=1400 audit(1732060013.417:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=437 comm="apparmor_parser"
<5>[ 18.327458] audit: type=1400 audit(1732060013.419:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=439 comm="apparmor_parser"
<5>[ 18.329065] audit: type=1400 audit(1732060013.421:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=438 comm="apparmor_parser"
<5>[ 18.331000] audit: type=1400 audit(1732060013.422:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=436 comm="apparmor_parser"
<5>[ 18.332062] audit: type=1400 audit(1732060013.424:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=435 comm="apparmor_parser"
<5>[ 18.334159] audit: type=1400 audit(1732060013.426:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=434 comm="apparmor_parser"
<5>[ 18.338534] audit: type=1400 audit(1732060013.430:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=443 comm="apparmor_parser"
<5>[ 18.339339] audit: type=1400 audit(1732060013.431:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=444 comm="apparmor_parser"
<6>[ 18.609413] ACPI: bus type thunderbolt registered
<6>[ 18.612716] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 18.627938] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 18.628564] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 18.639287] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 18.639298] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 18.642836] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 18.698842] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 18.705435] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 18.705439] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 18.705547] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 18.707470] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 18.710316] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 18.721431] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 18.814453] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 18.815297] intel_rapl_common: Found RAPL domain package
<6>[ 18.815304] intel_rapl_common: Found RAPL domain dram
<6>[ 18.876002] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 18.876012] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 18.876014] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 18.876015] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 18.876016] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 18.905434] cryptd: max_cpu_qlen set to 1000
<6>[ 18.924830] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 176
<6>[ 18.924837] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 18.934438] AES CTR mode by8 optimization enabled
<6>[ 18.953858] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 18.954033] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 19.076889] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 19.097590] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:c8
<6>[ 19.097598] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 19.097714] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 19.105320] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<4>[ 19.314026] block nvme0n1: No UUID available providing old NGUID
<6>[ 19.388376] intel_rapl_common: Found RAPL domain package
<6>[ 19.388382] intel_rapl_common: Found RAPL domain core
<6>[ 19.388703] intel_rapl_common: Found RAPL domain dram
<6>[ 19.388706] intel_rapl_common: Found RAPL domain psys
<6>[ 19.588105] evm: overlay not supported
<5>[ 19.590601] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 19.590767] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 19.601808] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 19.646028] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 19.791100] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 19.954846] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 19.963956] loop0: detected capacity change from 0 to 8
<6>[ 20.098408] hid: raw HID events driver (C) Jiri Kosina
<6>[ 20.106548] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 20.158909] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.161467] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.164707] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.166745] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.169839] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.172611] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.177858] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.182156] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.186326] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.189932] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 20.192951] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 20.196349] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 23.536337] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<6>[ 27.091761] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 27.091797] typec port0: bound usb2-port1 (ops connector_ops)
<7>[ 28.413703] systemd-journald[214]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<6>[ 39.684425] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 39.684669] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 53.653604] Console: switching to colour dummy device 80x25
<7>[ 53.653649] [IGT] xe_module_load: executing
<7>[ 53.658874] [IGT] xe_module_load: starting subtest load
<7>[ 53.842388] simple-framebuffer simple-framebuffer.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:37] from all active usage due to RMFB ioctl
<7>[ 53.842486] simple-framebuffer simple-framebuffer.0: [drm:atomic_remove_fb] Disabling [PLANE:32:plane-0] because [FB:37] is removed
<7>[ 53.842584] simple-framebuffer simple-framebuffer.0: [drm:atomic_remove_fb] Disabling [PLANE:32:plane-0] because [FB:37] is removed
<7>[ 53.842596] simple-framebuffer simple-framebuffer.0: [drm:atomic_remove_fb] Disabling [CRTC:34:crtc-0] because [FB:37] is removed
<7>[ 53.844486] simple-framebuffer simple-framebuffer.0: [drm:drm_client_release] fbdev
<7>[ 53.844910] simple-framebuffer simple-framebuffer.0: [drm:drm_sysfs_connector_remove] [CONNECTOR:36:Unknown-1] removing connector from sysfs
<6>[ 53.847346] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 53.849941] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 53.849957] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 53.850143] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 53.850326] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 53.853194] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 53.857306] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 53.857400] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 53.857472] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 53.857540] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 53.857604] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 53.857666] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 53.857727] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 53.857788] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 53.857848] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 53.857907] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 53.857976] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 53.858039] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 53.858104] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 53.858167] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 53.858231] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 53.858339] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 53.859684] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 53.859776] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 53.869037] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 53.870331] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 53.870597] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 53.870844] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000df
<7>[ 53.871089] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000000df
<7>[ 53.871287] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 53.871477] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 53.871661] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 53.872875] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.36.0
<7>[ 53.877951] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 53.878214] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 53.878415] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 53.878606] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 53.878825] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 53.879030] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 53.879226] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 53.879390] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 53.879549] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 53.879707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 53.879861] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 53.880028] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 53.880209] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 53.880378] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 53.882929] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 53.886458] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1263
<6>[ 53.887636] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 53.887771] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 53.887950] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 53.889658] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 53.889821] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 53.909292] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 53.909793] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 53.910026] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 53.910240] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 53.910446] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 53.910652] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 53.910852] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 53.911089] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 53.911330] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0
<7>[ 53.911685] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 53.912090] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 53.912393] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 53.912665] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 53.912931] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 53.913269] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 53.913616] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 53.913874] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 53.914227] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 53.914543] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 53.914867] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 53.915222] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 53.915601] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 53.915925] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 53.916254] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 53.916572] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 53.916834] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.917101] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.917331] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 53.917557] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.917772] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.918026] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.918233] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 53.918432] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.918613] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.918786] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.918954] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 53.919184] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.919351] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.919507] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.919661] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 53.919819] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.919991] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.920146] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.920298] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 53.920442] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 53.920588] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 53.920744] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 53.920882] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 53.921562] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 53.921792] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 53.922001] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 53.922216] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 53.922393] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 53.922551] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 53.922712] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 53.922892] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 53.923071] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 53.923241] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 53.923398] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 53.923546] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 53.923702] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 53.923857] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 53.924029] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 53.924176] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 53.924332] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 53.924488] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 53.924656] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 53.924838] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.925096] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.925273] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 53.925449] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 53.925624] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 53.925806] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.925985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.926157] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 53.926341] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 53.926639] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 53.927102] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 53.927466] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 53.927849] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 53.928215] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 53.928525] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 53.928813] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 53.929056] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 53.929326] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 53.929565] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
<7>[ 53.929605] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 53.929917] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 53.930165] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 53.930390] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 53.930988] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 53.931296] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 53.933609] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 53.936186] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 53.936413] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 53.936469] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 53.936610] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 53.936716] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 53.936786] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 53.936898] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 53.936950] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 53.937068] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 53.937130] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x578856c4 (EVT_HTP)
<7>[ 53.937215] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 53.937286] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 53.937351] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 53.937426] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 53.937484] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 53.937565] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.937613] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 53.937697] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 53.937823] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.937943] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 53.938083] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 53.938199] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 53.938311] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.938420] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 53.938527] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.938629] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 53.938735] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 53.938835] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 53.938932] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 53.939039] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 53.939139] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 53.939240] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 53.944773] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<6>[ 53.950070] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.23)
<7>[ 53.950041] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 53.950384] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 53.950708] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 53.951049] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 53.951439] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 53.951785] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 53.952184] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 53.952458] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 53.952795] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 53.953143] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 53.953406] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 53.953659] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 53.953908] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 53.954177] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 53.954491] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 53.954811] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 53.955088] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 53.955321] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 53.955548] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 53.955814] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 53.956101] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 53.956420] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 53.958028] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 53.958317] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 53.960823] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 53.961543] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 53.962508] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85
<7>[ 53.964219] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 53.964950] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 53.967496] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 53.974408] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 53.978098] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 53.978124] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.978127] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.978129] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 53.978135] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.978138] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 53.978143] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.978145] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 53.978150] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.978226] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.978229] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.978231] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.978247] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.978892] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 53.979556] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 53.979721] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 53.979930] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 53.980143] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 53.980394] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 53.980547] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 53.980673] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 53.980739] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 53.980801] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 53.980893] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 53.981112] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 53.981298] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.981471] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 53.981900] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 53.982027] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.982150] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 53.982425] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 53.982537] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 53.982646] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 53.983184] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 53.983321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 53.983431] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 53.983499] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 53.983564] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 53.983627] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 53.983688] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 53.983749] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 53.983810] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 53.983870] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 53.983930] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 53.984007] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 53.984070] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 53.984131] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 53.984190] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 53.984250] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 53.984309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 53.984369] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 53.984428] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 53.984488] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 53.984547] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 53.985334] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 53.985445] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 53.985534] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 53.985616] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 53.985686] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.985747] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.985804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.985865] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 53.985934] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 53.986007] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.986067] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.986124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.986183] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 53.986249] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 53.986306] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 53.986362] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 53.986417] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 53.986509] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 53.986577] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 53.986640] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 53.986701] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 53.986952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 53.987032] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 53.987094] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 53.987152] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 53.987208] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 53.987264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 53.987320] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 53.987429] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 53.987501] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 53.987564] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 53.987623] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 53.987679] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 53.987734] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 53.987790] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 53.987890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 53.987956] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 53.988021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 53.988079] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 53.988136] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 53.988191] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 53.988247] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 53.988485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 53.988587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 53.988669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 53.988745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 53.988817] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 53.988888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 53.988958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 53.989034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 53.989104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 53.989173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 53.989241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 53.989309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 53.989376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 53.989444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 53.989512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, pipeline full: 0, guardband: 105 flipline: 1906, vmin vblank: 1802, vmax vblank: 1801
<7>[ 53.989581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.989651] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.989721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.989790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.989858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.989926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 53.989998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 53.990065] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 53.990132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 53.990199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 53.990265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 53.990330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 53.990395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 53.990458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.990523] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.990588] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.990651] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.990716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.990780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.990844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.990908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.990976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.991041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.991107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 53.991173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 53.991389] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 53.991480] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 53.991549] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 53.991794] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 53.991865] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 54.013183] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 54.234407] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 54.234411] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 54.234412] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 54.235372] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 54.235471] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 54.235558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 54.235637] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 54.235711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 54.235784] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 54.235854] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 54.235925] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 54.235999] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 54.236064] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 54.236132] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 54.236199] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 54.236265] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 54.236327] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 54.236387] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 54.236449] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 54.236509] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 54.236568] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 54.236625] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 54.236681] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 54.236737] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 54.236790] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 54.236842] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 54.236894] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 54.236944] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 54.237006] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 54.237068] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 54.237130] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 54.237193] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 54.237255] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 54.237313] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 54.237371] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 54.237430] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 54.237490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 54.237549] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 54.237605] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting rcs0 registers
<7>[ 54.237657] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 54.237707] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 54.237757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 54.238013] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 54.238079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 54.238141] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 54.238420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 54.238468] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 54.238514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 54.238691] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 54.238737] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7>[ 54.238784] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 54.238834] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting ccs0 registers
<7>[ 54.238883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 54.238929] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 54.238981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 54.239456] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002523d7
<7>[ 54.239626] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 54.239684] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 54.239736] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 54.239784] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006ca
<7>[ 54.239830] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 54.239874] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 54.239919] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 54.239977] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 54.240025] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 54.240078] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 54.240130] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 54.240180] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 54.240230] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 54.240320] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 54.240578] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 54.242981] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 54.257114] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 54.257931] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 54.258011] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 54.263025] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 54.265816] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.266172] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 54.266984] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 54.267065] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 54.267141] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 54.267210] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 54.267283] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 54.267350] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 54.267416] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 54.267479] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 54.267545] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 54.270631] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 54.270779] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 54.270873] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 54.272678] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 54.276407] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 54.276410] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 54.276411] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 54.276412] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 54.276413] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 54.276414] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 54.276415] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 54.276416] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 54.276417] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 54.276418] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 54.276985] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 54.277092] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 54.277194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 54.277291] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 54.277369] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 54.277444] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 54.277514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 54.277583] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 54.277647] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 54.277708] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 54.277769] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 54.277827] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 54.277884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 54.277940] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 54.278007] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 54.278078] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 54.278147] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 54.278214] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 54.278279] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 54.278330] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 54.278381] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 54.278432] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 54.278482] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 54.278534] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 54.278586] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 54.278638] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 54.278698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 54.279368] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 54.279431] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 54.279742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 54.279809] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 54.280256] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c5e3d7
<7>[ 54.280320] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 54.280377] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 54.280433] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 54.280485] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae2
<7>[ 54.280537] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 54.280587] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 54.280639] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 54.280690] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 54.280738] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 54.280783] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 54.280829] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 54.280874] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 54.280919] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 54.280981] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 54.281073] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 54.299138] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 54.300288] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 54.300506] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 54.320013] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 54.320529] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 54.321633] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.324329] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.326980] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 54.370929] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 54.373401] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 54.374063] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 54.374598] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 54.374996] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 54.375407] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 54.375755] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 54.376108] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 54.376575] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 54.376995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.377392] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.377786] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 54.378441] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 54.378986] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 54.379337] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 54.391178] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 54.396905] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 54.402616] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 54.403416] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 54.406083] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 54.406172] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 54.406702] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 54.407528] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 54.407572] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 54.407946] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 54.408615] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 54.408651] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 54.408984] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 54.409462] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 54.409486] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 54.409515] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 54.416952] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 54.419448] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 54.420340] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 54.420438] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 54.421494] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 54.421572] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 54.421647] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 54.421719] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 54.421840] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 54.421977] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:189:eDP-1]
<7>[ 54.421991] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 54.422646] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 54.423174] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 54.423295] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.423408] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.423601] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 54.423607] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.423608] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.423609] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 54.423611] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.423613] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 54.423615] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.423616] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 54.423619] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.423638] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 54.423726] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 54.424387] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 54.424518] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 54.425600] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 54.425806] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.425808] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.425810] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.425842] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 54.425849] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.425853] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:198:DP-1]
<7>[ 54.425857] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 54.426030] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.426155] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 54.426159] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:198:DP-1] disconnected
<7>[ 54.426162] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:210:DP-2]
<7>[ 54.426165] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 54.426292] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.426382] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 54.426384] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:210:DP-2] disconnected
<7>[ 54.426386] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:DP-3]
<7>[ 54.426388] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 54.426490] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.426579] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 54.426581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:DP-3] disconnected
<7>[ 54.426583] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 54.426585] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 54.426587] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 54.426588] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 54.426638] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 54.426646] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 54.426648] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 54.426649] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 54.426651] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 54.426659] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 54.426687] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<7>[ 54.426737] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 54.426772] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 54.426930] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 54.427141] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 54.427341] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 54.433646] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d7a000
<6>[ 54.434428] fbcon: xedrmfb (fb0) is primary device
<7>[ 54.435171] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 54.435306] xe 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 54.435405] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 54.435499] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 54.435588] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 54.435677] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 54.435762] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 54.435847] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 54.435931] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 54.436044] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 54.436146] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 54.436253] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 54.436357] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 54.436456] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 54.436540] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 54.436623] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 54.436706] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 54.436789] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 54.436873] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 54.436957] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 54.437063] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 54.437166] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 54.437261] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 54.437353] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 54.437432] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 54.437506] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 54.437581] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 54.437655] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 54.437726] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 54.437794] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 54.437861] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 54.437942] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 54.438037] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 54.438176] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 54.438289] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 54.438397] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 54.438493] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 54.438583] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 54.438671] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.438754] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.438825] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.438891] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.438953] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.439034] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439116] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439194] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439268] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.439350] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439421] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439481] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439536] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.439592] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439647] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439701] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439757] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 54.439816] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439876] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.439934] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 54.440009] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 54.440135] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 54.440240] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 54.440340] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.440420] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 54.440496] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 54.440587] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 54.440689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 54.440779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 54.440866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 54.440949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 54.441082] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 54.441181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 54.441275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 54.441366] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 54.441438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 54.441504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 54.441569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 54.441634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 54.441698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 54.441761] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 54.441823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 54.441884] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 54.441945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 54.442029] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 54.442108] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 54.442186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 54.442264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1905, vmax: 2859, pipeline full: 0, guardband: 106 flipline: 1906, vmin vblank: 1800, vmax vblank: 2753
<7>[ 54.442330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.442395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.442458] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.442522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 54.442586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 54.442650] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 54.442711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 54.442770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 54.442830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 54.442888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 54.442948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 54.443023] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 54.443095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 54.443168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.443240] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.443312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.443380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.443437] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.443501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 54.443565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.443629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.443689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 54.443749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 54.443803] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 54.443859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 54.443914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 54.443974] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 54.444041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 54.444111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 54.444184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 54.444258] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 54.467097] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 54.477489] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 54.478059] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 54.501018] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 54.670202] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 54.671839] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 54.675768] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 54.675768] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 54.676176] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 54.676230] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 54.676584] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 54.728621] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 54.728762] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 54.758043] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 54.758549] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 54.758592] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 54.759713] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 54.759736] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 54.760094] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 54.760395] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 54.760651] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 54.760909] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 54.761215] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 54.761465] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 54.761707] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 54.762018] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 54.762276] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 54.762530] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 54.762784] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 54.763125] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 54.763132] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 54.763395] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 54.763550] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 54.763673] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 54.763890] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 54.764242] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 54.765027] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 54.765326] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle
<7>[ 54.923902] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 55.381281] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 55.381667] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.381959] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 55.382303] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 55.418187] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 55.418684] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 55.419132] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 55.419600] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 55.445710] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.445710] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.445710] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.637214] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 55.640483] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 55.641026] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 55.644339] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 55.645662] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 55.646960] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 55.648313] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 55.649609] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 55.651238] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 55.651688] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 55.653639] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 55.654081] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 55.655076] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 55.655722] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 55.656202] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 55.656704] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 55.658903] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 55.658928] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 55.659301] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 55.672635] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 55.675744] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 55.676283] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 55.677933] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 55.681016] Console: switching to colour frame buffer device 180x56
<6>[ 55.695131] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 55.709166] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 55.709482] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event]
<7>[ 55.709521] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 55.709655] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 55.710063] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 55.710370] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:189:eDP-1]
<7>[ 55.710424] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 55.710421] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 55.710759] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 55.711108] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 55.711421] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 55.711718] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 55.712018] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 55.712329] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 55.712312] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 55.712605] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 55.712878] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 55.713191] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 55.713307] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 55.713477] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 55.713778] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 55.713757] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 55.714105] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 55.714272] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 55.714465] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 55.714758] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 55.715057] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 55.715223] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 55.715241] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.715245] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.715248] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 55.715257] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.715260] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 55.715269] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.715272] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 55.715280] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.715367] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 55.715339] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 55.715648] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 55.715728] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 55.715921] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 55.716240] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 55.716630] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 55.718232] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 55.718835] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 55.719298] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 55.720137] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 55.720541] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 55.720870] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<5>[ 55.722899] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.722910] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 55.722916] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 55.723063] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 55.723089] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 55.723106] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:198:DP-1]
<7>[ 55.723121] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 55.723632] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 55.724152] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 55.724587] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 55.725043] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 55.725122] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.725591] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:198:DP-1] disconnected
<7>[ 55.725608] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:210:DP-2]
<7>[ 55.725623] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 55.726137] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.726583] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:210:DP-2] disconnected
<7>[ 55.726594] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:DP-3]
<7>[ 55.726605] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 55.727117] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 55.727557] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:218:DP-3] disconnected
<7>[ 55.727567] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 55.727578] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 55.727587] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 55.727595] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 55.728009] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 55.728082] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 55.728093] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 55.728102] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 55.728110] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 55.728175] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 55.734105] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 55.734538] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 55.740833] xe 0000:00:02.0: [drm:drm_client_dev_hotplug] intel-fbdev: ret=0
<6>[ 55.781301] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 55.782927] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [xe])
<7>[ 55.783123] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 55.783356] xe 0000:00:02.0: [drm:i915_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 55.789435] xe 0000:00:02.0: [drm:drm_client_dev_restore] intel-fbdev: ret=0
<7>[ 55.789534] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 55.789588] [IGT] xe_module_load: exiting, ret=0
<7>[ 55.820039] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 55.820178] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 55.820278] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 55.820371] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 55.820462] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 55.820551] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 55.820640] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 55.820727] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 55.820815] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 55.820901] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 55.821001] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 55.821089] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 55.821177] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 55.821264] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 55.821348] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 55.821432] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 55.821517] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 55.821601] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 55.821684] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 55.821768] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 55.821851] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 55.821934] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 55.822026] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 55.822113] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 55.822198] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 55.822283] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 55.822368] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 55.822454] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 55.822542] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 55.822628] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 55.822726] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 55.822804] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 55.822880] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 55.822956] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 55.823070] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 55.823149] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 55.829622] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 55.829849] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 55.829938] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[ 55.831770] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 55.832840] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 55.834110] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 55.837906] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 55.841699] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 55.841823] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 56.789287] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.789408] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.789511] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 56.854827] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 58.811965] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 58.812389] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<4>[ 62.452903] msr: Write to unrecognized MSR 0xe2 by wrmsr (pid: 2010).
<4>[ 62.452907] msr: See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.