<5>[ 0.000000] Linux version 6.12.0-rc3-xe (builder@lgci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Tue Oct 15 08:32:27 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cb59fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cb5a000-0x000000006fed2fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fed3000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001043fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cc32000 MEMATTR=0x68eb4018 ESRT=0x69030a98 MOKvar=0x6cd66000
<6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D89.2409021714 09/02/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000012] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000015] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000016] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000329] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000330] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004157] esrt: Reserving ESRT space from 0x0000000069030a98 to 0x0000000069030be8.
<7>[ 0.004165] e820: update [mem 0x69030000-0x69030fff] usable ==> reserved
<6>[ 0.004185] Using GB pages for direct mapping
<6>[ 0.004829] printk: log_buf_len: 1048576 bytes
<6>[ 0.004830] printk: early log buf free: 258968(98%)
<6>[ 0.004830] Secure boot disabled
<6>[ 0.004832] ACPI: Early table checksum verification disabled
<6>[ 0.004835] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.004837] ACPI: XSDT 0x000000006FF7D228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004841] ACPI: FACP 0x000000006FFAC000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.004844] ACPI: DSDT 0x000000006FFB8000 024FCF (v02 INTEL LNL 00000002 01000013)
<6>[ 0.004845] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.004846] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.004848] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.004849] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.004850] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.004852] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.004853] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.004854] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.004856] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.004857] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.004858] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.004859] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.004861] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.004862] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.004863] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.004865] ACPI: SSDT 0x000000006FFDE000 008E92 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.004866] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.004867] ACPI: SSDT 0x000000006FFB3000 004A7D (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.004868] ACPI: SSDT 0x000000006FFB1000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.004869] ACPI: SSDT 0x000000006FFAD000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.004871] ACPI: HPET 0x000000006FFAB000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004872] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004873] ACPI: APIC 0x000000006FFA9000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.004874] ACPI: MCFG 0x000000006FFA8000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004876] ACPI: SSDT 0x000000006FFA7000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.004877] ACPI: SSDT 0x000000006FFA1000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.004878] ACPI: SSDT 0x000000006FF96000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.004879] ACPI: LPIT 0x000000006FF95000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004881] ACPI: SSDT 0x000000006FF94000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.004882] ACPI: SSDT 0x000000006FF93000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.004883] ACPI: DBGP 0x000000006FF92000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004884] ACPI: DBG2 0x000000006FF91000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004886] ACPI: NHLT 0x000000006FF90000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004887] ACPI: SSDT 0x000000006FF8E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.004888] ACPI: SSDT 0x000000006FF87000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.004889] ACPI: ECDT 0x000000006FF86000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.004891] ACPI: DMAR 0x000000006FF85000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004892] ACPI: FPDT 0x000000006FF84000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004893] ACPI: SSDT 0x000000006FF83000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.004894] ACPI: SSDT 0x000000006FF81000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.004896] ACPI: SSDT 0x000000006FF7E000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.004897] ACPI: SDEV 0x000000006FFAA000 000046 (v01 00000000 00000000)
<6>[ 0.004898] ACPI: SSDT 0x000000006FF72000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.004900] ACPI: SSDT 0x000000006FF64000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.004901] ACPI: ASF! 0x000000006FF63000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.004902] ACPI: PHAT 0x000000006FF62000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.004903] ACPI: BGRT 0x000000006FF61000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004904] ACPI: Reserving FACP table memory at [mem 0x6ffac000-0x6ffac113]
<6>[ 0.004905] ACPI: Reserving DSDT table memory at [mem 0x6ffb8000-0x6ffdcfce]
<6>[ 0.004906] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.004906] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.004906] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.004907] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.004907] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.004907] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.004907] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.004908] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.004908] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.004908] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.004909] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.004909] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.004909] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.004910] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.004910] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.004910] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6e91]
<6>[ 0.004910] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.004911] ACPI: Reserving SSDT table memory at [mem 0x6ffb3000-0x6ffb7a7c]
<6>[ 0.004911] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb240e]
<6>[ 0.004911] ACPI: Reserving SSDT table memory at [mem 0x6ffad000-0x6ffb0955]
<6>[ 0.004912] ACPI: Reserving HPET table memory at [mem 0x6ffab000-0x6ffab037]
<6>[ 0.004912] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.004912] ACPI: Reserving APIC table memory at [mem 0x6ffa9000-0x6ffa90d7]
<6>[ 0.004913] ACPI: Reserving MCFG table memory at [mem 0x6ffa8000-0x6ffa803b]
<6>[ 0.004913] ACPI: Reserving SSDT table memory at [mem 0x6ffa7000-0x6ffa76e2]
<6>[ 0.004913] ACPI: Reserving SSDT table memory at [mem 0x6ffa1000-0x6ffa6320]
<6>[ 0.004913] ACPI: Reserving SSDT table memory at [mem 0x6ff96000-0x6ffa0469]
<6>[ 0.004914] ACPI: Reserving LPIT table memory at [mem 0x6ff95000-0x6ff950cb]
<6>[ 0.004914] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff94d5b]
<6>[ 0.004914] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff931ef]
<6>[ 0.004915] ACPI: Reserving DBGP table memory at [mem 0x6ff92000-0x6ff92033]
<6>[ 0.004915] ACPI: Reserving DBG2 table memory at [mem 0x6ff91000-0x6ff91053]
<6>[ 0.004915] ACPI: Reserving NHLT table memory at [mem 0x6ff90000-0x6ff902e2]
<6>[ 0.004916] ACPI: Reserving SSDT table memory at [mem 0x6ff8e000-0x6ff8f15b]
<6>[ 0.004916] ACPI: Reserving SSDT table memory at [mem 0x6ff87000-0x6ff8d53a]
<6>[ 0.004916] ACPI: Reserving ECDT table memory at [mem 0x6ff86000-0x6ff86068]
<6>[ 0.004916] ACPI: Reserving DMAR table memory at [mem 0x6ff85000-0x6ff850d7]
<6>[ 0.004917] ACPI: Reserving FPDT table memory at [mem 0x6ff84000-0x6ff84043]
<6>[ 0.004917] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff8386c]
<6>[ 0.004917] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff82121]
<6>[ 0.004918] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff80462]
<6>[ 0.004918] ACPI: Reserving SDEV table memory at [mem 0x6ffaa000-0x6ffaa045]
<6>[ 0.004918] ACPI: Reserving SSDT table memory at [mem 0x6ff72000-0x6ff7c4f9]
<6>[ 0.004919] ACPI: Reserving SSDT table memory at [mem 0x6ff64000-0x6ff71815]
<6>[ 0.004919] ACPI: Reserving ASF! table memory at [mem 0x6ff63000-0x6ff63073]
<6>[ 0.004919] ACPI: Reserving PHAT table memory at [mem 0x6ff62000-0x6ff626df]
<6>[ 0.004920] ACPI: Reserving BGRT table memory at [mem 0x6ff61000-0x6ff61037]
<6>[ 0.004997] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005286] No NUMA configuration found
<6>[ 0.005286] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005292] NODE_DATA(0) allocated [mem 0x87f353100-0x87f37dfff]
<6>[ 0.005402] Zone ranges:
<6>[ 0.005403] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005404] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005405] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005405] Device empty
<6>[ 0.005406] Movable zone start for each node
<6>[ 0.005407] Early memory node ranges
<6>[ 0.005407] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005408] node 0: [mem 0x0000000000100000-0x000000006cb59fff]
<6>[ 0.005408] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005408] node 0: [mem 0x0000000104400000-0x000000087f7fffff]
<6>[ 0.005410] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005414] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005432] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007447] On node 0, zone DMA32: 13477 pages in unavailable ranges
<6>[ 0.035891] On node 0, zone Normal: 17408 pages in unavailable ranges
<6>[ 0.035956] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036589] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036595] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.036647] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.036648] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.036650] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.036652] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.036652] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.036663] e820: update [mem 0x68fd5000-0x68feffff] usable ==> reserved
<6>[ 0.036669] TSC deadline timer available
<6>[ 0.036671] CPU topo: Max. logical packages: 1
<6>[ 0.036671] CPU topo: Max. logical dies: 1
<6>[ 0.036671] CPU topo: Max. dies per package: 1
<6>[ 0.036673] CPU topo: Max. threads per core: 1
<6>[ 0.036673] CPU topo: Num. cores per package: 8
<6>[ 0.036674] CPU topo: Num. threads per package: 8
<6>[ 0.036674] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.036686] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.036688] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.036689] PM: hibernation: Registered nosave memory: [mem 0x68fd5000-0x68feffff]
<6>[ 0.036689] PM: hibernation: Registered nosave memory: [mem 0x69030000-0x69030fff]
<6>[ 0.036690] PM: hibernation: Registered nosave memory: [mem 0x6cb5a000-0x6fed2fff]
<6>[ 0.036691] PM: hibernation: Registered nosave memory: [mem 0x6fed3000-0x6ff4ffff]
<6>[ 0.036691] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.036692] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.036692] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.036692] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.036692] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.036693] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1043fffff]
<6>[ 0.036694] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.036695] Booting paravirtualized kernel on bare hardware
<6>[ 0.036697] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
<6>[ 0.036705] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037037] percpu: Embedded 69 pages/cpu s245760 r8192 d28672 u524288
<7>[ 0.037041] pcpu-alloc: s245760 r8192 d28672 u524288 alloc=1*2097152
<7>[ 0.037043] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037055] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<5>[ 0.037126] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037140] random: crng init done
<6>[ 0.038980] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.039892] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.039946] Fallback order for Node 0: 0
<6>[ 0.039949] Built 1 zonelists, mobility grouping on. Total pages: 8290041
<6>[ 0.039949] Policy zone: Normal
<6>[ 0.039958] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.039959] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.039961] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.040944] software IO TLB: area num 8.
<4>[ 0.086572] **********************************************************
<4>[ 0.086573] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086574] ** **
<4>[ 0.086574] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086574] ** via the console, logs, and other interfaces. This **
<4>[ 0.086574] ** might reduce the security of your system. **
<4>[ 0.086575] ** **
<4>[ 0.086575] ** If you see this message and you are not debugging **
<4>[ 0.086575] ** the kernel, report this immediately to your system **
<4>[ 0.086575] ** administrator! **
<4>[ 0.086575] ** **
<4>[ 0.086575] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086575] **********************************************************
<6>[ 0.086847] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.087155] ftrace: allocating 58146 entries in 228 pages
<6>[ 0.093862] ftrace: allocated 228 pages with 4 groups
<6>[ 0.095007] Dynamic Preempt: voluntary
<6>[ 0.095432] Running RCU self tests
<6>[ 0.095432] Running RCU synchronous self tests
<6>[ 0.095437] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.095437] rcu: RCU lockdep checking is enabled.
<6>[ 0.095438] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.095438] Trampoline variant of Tasks RCU enabled.
<6>[ 0.095439] Rude variant of Tasks RCU enabled.
<6>[ 0.095439] Tracing variant of Tasks RCU enabled.
<6>[ 0.095439] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
<6>[ 0.095440] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.095478] Running RCU synchronous self tests
<6>[ 0.095481] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.095484] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.095487] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.105364] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.105841] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.106178] Console: colour dummy device 80x25
<6>[ 0.106186] printk: legacy console [tty0] enabled
<4>[ 0.107360] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>[ 0.107368] ... MAX_LOCKDEP_SUBCLASSES: 8
<4>[ 0.107371] ... MAX_LOCK_DEPTH: 48
<4>[ 0.107375] ... MAX_LOCKDEP_KEYS: 8192
<4>[ 0.107379] ... CLASSHASH_SIZE: 4096
<4>[ 0.107382] ... MAX_LOCKDEP_ENTRIES: 524288
<4>[ 0.107386] ... MAX_LOCKDEP_CHAINS: 524288
<4>[ 0.107390] ... CHAINHASH_SIZE: 262144
<4>[ 0.107393] memory used by lock dependency info: 54145 kB
<4>[ 0.107398] memory used for stack traces: 4224 kB
<4>[ 0.107402] per task-struct memory footprint: 1920 bytes
<6>[ 0.107448] ACPI: Core revision 20240827
<6>[ 0.108286] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.108367] APIC: Switch to symmetric I/O mode setup
<6>[ 0.108372] DMAR: Host address width 38
<6>[ 0.108376] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.108403] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.108431] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.108452] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.108478] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.108586] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89804f0efda
<6>[ 0.108772] DMAR: SATC flags: 0x1
<6>[ 0.108780] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.108786] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.108790] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.110769] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.115113] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.115131] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=12441600)
<6>[ 0.115205] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.115211] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.115389] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.115394] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.115401] process: using mwait in idle threads
<6>[ 0.115408] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.115415] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.115420] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.115427] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.115434] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.115450] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.115457] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.115462] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.115468] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.115474] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.115481] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.115486] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.115492] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.115497] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.119126] Freeing SMP alternatives memory: 48K
<6>[ 0.119126] pid_max: default: 32768 minimum: 301
<6>[ 0.119126] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.119126] landlock: Up and running.
<6>[ 0.119126] Yama: becoming mindful.
<6>[ 0.119126] AppArmor: AppArmor initialized
<6>[ 0.119126] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.119126] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.119126] Running RCU synchronous self tests
<6>[ 0.119126] Running RCU synchronous self tests
<6>[ 0.119126] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.119126] Running RCU Tasks wait API self tests
<6>[ 0.119126] Running RCU Tasks Rude wait API self tests
<6>[ 0.119126] Running RCU Tasks Trace wait API self tests
<6>[ 0.119126] Performance Events: XSAVE Architectural LBR, no PEBS fmt6+, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.119126] core: cpu_core PMU driver:
<6>[ 0.119126] ... version: 6
<6>[ 0.119126] ... bit width: 48
<6>[ 0.119126] ... generic registers: 10
<6>[ 0.119126] ... value mask: 0000ffffffffffff
<6>[ 0.119126] ... max period: 00007fffffffffff
<6>[ 0.119126] ... fixed-purpose events: 4
<6>[ 0.119126] ... event mask: 0001000f000003ff
<6>[ 0.119126] signal: max sigframe size: 3632
<6>[ 0.119126] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.119126] rcu: Hierarchical SRCU implementation.
<6>[ 0.119126] rcu: Max phase no-delay instances is 1000.
<6>[ 0.119126] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.119126] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.119126] smp: Bringing up secondary CPUs ...
<6>[ 0.119126] smpboot: x86: Booting SMP configuration:
<6>[ 0.119126] .... node #0, CPUs: #1 #2 #3
<3>[ 0.119171] psi: inconsistent task state! task=1:swapper/0 cpu=0 psi_flags=4 clear=0 set=4
<4>[ 0.131991] #4
<6>[ 0.132192] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.143561] #5 #6 #7
<6>[ 0.013086] core: cpu_atom PMU driver:
<6>[ 0.013086] ... version: 6
<6>[ 0.013086] ... bit width: 48
<6>[ 0.013086] ... generic registers: 8
<6>[ 0.013086] ... value mask: 0000ffffffffffff
<6>[ 0.013086] ... max period: 00007fffffffffff
<6>[ 0.013086] ... fixed-purpose events: 6
<6>[ 0.013086] ... event mask: 00000077000000ff
<6>[ 0.147284] smp: Brought up 1 node, 8 CPUs
<6>[ 0.147468] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.152429] Memory: 32364668K/33160164K available (24576K kernel code, 5258K rwdata, 8856K rodata, 5552K init, 68804K bss, 774524K reserved, 0K cma-reserved)
<6>[ 0.152429] devtmpfs: initialized
<6>[ 0.152429] x86/mm: Memory block size: 128MB
<6>[ 0.168636] ACPI: PM: Registering ACPI NVS region [mem 0x6fed3000-0x6ff4ffff] (512000 bytes)
<6>[ 0.168636] Running RCU synchronous self tests
<6>[ 0.168636] Running RCU synchronous self tests
<6>[ 0.168636] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
<6>[ 0.168636] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.168636] pinctrl core: initialized pinctrl subsystem
<6>[ 0.168636] PM: RTC time: 12:43:22, date: 2024-10-15
<6>[ 0.171288] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.172234] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.172521] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.172811] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.172878] audit: initializing netlink subsys (disabled)
<5>[ 0.172925] audit: type=2000 audit(1728996202.056:1): state=initialized audit_enabled=0 res=1
<6>[ 0.172925] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.172925] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.172925] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.172925] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.172925] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.172925] EISA bus registered
<6>[ 0.172925] cpuidle: using governor ladder
<6>[ 0.172925] cpuidle: using governor menu
<6>[ 0.172925] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.172925] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.172925] PCI: Using configuration type 1 for base access
<6>[ 0.172925] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.175915] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.175915] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.175915] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.175915] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.247128] raid6: avx2x4 gen() 80413 MB/s
<6>[ 0.315127] raid6: avx2x2 gen() 90229 MB/s
<6>[ 0.383127] raid6: avx2x1 gen() 77661 MB/s
<6>[ 0.383131] raid6: using algorithm avx2x2 gen() 90229 MB/s
<6>[ 0.451127] raid6: .... xor() 57998 MB/s, rmw enabled
<6>[ 0.451131] raid6: using avx2x2 recovery algorithm
<6>[ 0.451760] fbcon: Taking over console
<6>[ 0.452100] ACPI: Added _OSI(Module Device)
<6>[ 0.452107] ACPI: Added _OSI(Processor Device)
<6>[ 0.452114] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.452121] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.864187] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.877472] ACPI: EC: EC started
<6>[ 0.877484] ACPI: EC: interrupt blocked
<6>[ 0.879825] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.879830] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.896598] Callback from call_rcu_tasks() invoked.
<6>[ 1.136400] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.136414] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.164114] ACPI: Interpreter enabled
<6>[ 1.164204] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.164210] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.169965] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.169972] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.187861] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.187906] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.227057] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.227323] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.229945] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.426883] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.434689] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.444177] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.445719] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.453998] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.465644] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.465880] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.466112] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.516867] ACPI: \: Can't tag data node
<3>[ 1.517964] ACPI: \: Can't tag data node
<3>[ 1.519066] ACPI: \: Can't tag data node
<3>[ 1.520064] ACPI: \: Can't tag data node
<3>[ 1.521149] ACPI: \: Can't tag data node
<6>[ 1.623088] ACPI: \_TZ_.FN00: New power resource
<6>[ 1.624215] ACPI: \_TZ_.FN01: New power resource
<6>[ 1.624687] ACPI: \_TZ_.FN02: New power resource
<6>[ 1.625149] ACPI: \_TZ_.FN03: New power resource
<6>[ 1.625611] ACPI: \_TZ_.FN04: New power resource
<6>[ 1.626881] ACPI: \PIN_: New power resource
<6>[ 1.630057] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 1.630071] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 1.633513] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 1.640842] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 1.650034] PCI host bridge to bus 0000:00
<6>[ 1.650065] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 1.650072] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 1.650079] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 1.650086] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 1.650093] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 1.650101] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 1.654108] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 1.654928] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 1.655107] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 1.655233] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 1.655380] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 1.655442] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 1.656647] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 1.656664] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 1.657796] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 1.657813] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 1.657830] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 1.658727] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 1.658775] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 1.658786] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 1.658803] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 1.659007] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 1.659185] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 1.663271] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 1.663318] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 1.663329] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 1.663347] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 1.663538] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 1.663619] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 1.667593] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 1.667644] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 1.667655] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 1.667672] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 1.667862] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 1.668099] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 1.672873] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 1.672894] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 1.672926] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 1.673119] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 1.673136] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 1.673152] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 1.673549] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 1.673575] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 1.673669] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 1.675129] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 1.675155] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 1.675174] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 1.675252] pci 0000:00:0d.2: supports D1 D2
<6>[ 1.675255] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.676424] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 1.676451] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 1.676469] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 1.676547] pci 0000:00:0d.3: supports D1 D2
<6>[ 1.676551] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.677758] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 1.677785] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 1.677879] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 1.680164] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 1.680207] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 1.680347] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 1.680732] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 1.680758] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 1.680851] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 1.682581] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 1.682608] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 1.682626] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 1.682950] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.683012] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.686819] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.686880] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.688242] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.688303] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.689657] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.689722] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.691022] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 1.691067] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 1.692018] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 1.694264] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 1.694294] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027]
<6>[ 1.694311] pci 0000:00:16.3: BAR 1 [mem 0x94321000-0x94321fff]
<6>[ 1.694718] pci 0000:00:1c.0: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 1.694832] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 1.694863] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff]
<6>[ 1.695205] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 1.695371] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 1.699910] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 1.701210] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 1.701261] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 1.701322] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 1.701442] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 1.701811] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 1.701840] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 1.701867] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 1.702962] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.703003] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 1.703299] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 1.703326] pci 0000:00:1f.6: BAR 0 [mem 0x94300000-0x9431ffff]
<6>[ 1.703449] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 1.704908] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 1.705058] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 1.705206] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 1.705627] pci 0000:7f:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 1.705654] pci 0000:7f:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 1.706300] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 1.711373] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.084684] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 13.763925] Low-power S0 idle used by default for system suspend
<6>[ 13.860310] ACPI: EC: interrupt unblocked
<6>[ 13.860335] ACPI: EC: event unblocked
<6>[ 13.863139] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 13.863139] ACPI: EC: GPE=0x6e
<6>[ 13.863139] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 13.863139] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 13.863534] iommu: Default domain type: Translated
<6>[ 13.863534] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 13.863893] SCSI subsystem initialized
<7>[ 13.867224] libata version 3.00 loaded.
<6>[ 13.867403] ACPI: bus type USB registered
<6>[ 13.867524] usbcore: registered new interface driver usbfs
<6>[ 13.867588] usbcore: registered new interface driver hub
<6>[ 13.867666] usbcore: registered new device driver usb
<6>[ 13.867866] pps_core: LinuxPPS API ver. 1 registered
<6>[ 13.867874] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 13.867906] PTP clock support registered
<6>[ 13.868023] EDAC MC: Ver: 3.0.0
<6>[ 13.868023] efivars: Registered efivars operations
<6>[ 13.872961] NetLabel: Initializing
<6>[ 13.872971] NetLabel: domain hash size = 128
<6>[ 13.872978] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 13.873085] NetLabel: unlabeled traffic allowed by default
<6>[ 13.873283] mctp: management component transport protocol core
<6>[ 13.873283] NET: Registered PF_MCTP protocol family
<6>[ 13.873283] PCI: Using ACPI for IRQ routing
<7>[ 13.887220] PCI: pci_cache_line_size set to 64 bytes
<6>[ 13.887826] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 13.887826] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 13.887826] e820: reserve RAM buffer [mem 0x68fd5000-0x6bffffff]
<7>[ 13.887826] e820: reserve RAM buffer [mem 0x69030000-0x6bffffff]
<7>[ 13.887826] e820: reserve RAM buffer [mem 0x6cb5a000-0x6fffffff]
<7>[ 13.887826] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 13.887999] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 13.887999] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 13.887999] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 13.887999] vgaarb: loaded
<6>[ 13.891496] clocksource: Switched to clocksource tsc-early
<5>[ 13.893092] VFS: Disk quotas dquot_6.6.0
<6>[ 13.893131] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 13.893938] AppArmor: AppArmor Filesystem Enabled
<6>[ 13.894204] pnp: PnP ACPI init
<6>[ 13.895480] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 13.895498] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 13.897637] system 00:02: [io 0x06a4] has been reserved
<6>[ 13.897652] system 00:02: [io 0x06a0] has been reserved
<6>[ 13.928276] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 13.928299] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 13.928316] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 13.928330] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 13.928343] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 13.928358] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 13.928373] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 13.928386] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 13.937523] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 13.945313] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 13.946187] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 13.959766] pnp: PnP ACPI: found 8 devices
<6>[ 13.986105] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 13.986673] NET: Registered PF_INET protocol family
<6>[ 13.986947] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.990670] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 13.990913] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 13.991096] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.991965] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 13.993243] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 13.993825] MPTCP token hash table entries: 32768 (order: 9, 2883584 bytes, linear)
<6>[ 13.994538] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 13.995116] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 13.995608] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 13.995655] NET: Registered PF_XDP protocol family
<6>[ 13.995670] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 13.995680] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 13.995688] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 13.995722] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 13.995728] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 13.995733] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 13.995739] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 13.995808] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 13.995858] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 13.995908] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 13.995959] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 13.995987] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 13.996016] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 13.996025] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 13.996033] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.996045] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 13.996051] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 13.996067] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 13.996075] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.996086] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 13.996092] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 13.996101] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 13.996109] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.996121] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 13.996157] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff]
<6>[ 13.996203] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 13.996208] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 13.996213] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 13.996218] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 13.996223] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 13.996229] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 13.996233] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 13.996237] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.996243] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 13.996248] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 13.996252] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.996258] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 13.996262] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 13.996266] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.996272] pci_bus 0000:7f: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 13.997260] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 13.999159] PCI: CLS 0 bytes, default 64
<6>[ 13.999242] DMAR: Intel-IOMMU force enabled due to platform opt in
<6>[ 13.999265] DMAR: No RMRR found
<6>[ 13.999323] DMAR: No ATSR found
<6>[ 13.999327] DMAR: IOMMU feature nwfs inconsistent
<6>[ 13.999330] DMAR: IOMMU feature dit inconsistent
<6>[ 13.999336] DMAR: IOMMU feature nest inconsistent
<6>[ 13.999340] DMAR: IOMMU feature sc_support inconsistent
<6>[ 13.999344] DMAR: IOMMU feature dev_iotlb_support inconsistent
<6>[ 13.999349] DMAR: dmar1: Using Queued invalidation
<6>[ 13.999390] DMAR: dmar0: Using Queued invalidation
<6>[ 13.999397] DMAR: dmar2: Using Queued invalidation
<6>[ 14.000488] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 14.000550] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 14.000606] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 14.000657] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 14.001499] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 14.002164] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 14.002380] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 14.002434] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 14.002478] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 14.002542] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 14.002573] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 14.002604] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 14.002657] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 14.002709] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 14.002768] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 14.002800] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 14.002870] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 14.002906] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 14.002940] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 14.002974] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 14.003031] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 14.003064] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 14.003153] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 14.003230] pci 0000:00:1f.0: Adding to iommu group 16
<6>[ 14.003266] pci 0000:00:1f.3: Adding to iommu group 16
<6>[ 14.003299] pci 0000:00:1f.4: Adding to iommu group 16
<6>[ 14.003333] pci 0000:00:1f.5: Adding to iommu group 16
<6>[ 14.003367] pci 0000:00:1f.6: Adding to iommu group 16
<6>[ 14.003457] pci 0000:7f:00.0: Adding to iommu group 17
<6>[ 14.004497] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 14.004502] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 14.004507] software IO TLB: mapped [mem 0x0000000063b5b000-0x0000000067b5b000] (64MB)
<6>[ 14.012032] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 14.012155] clocksource: Switched to clocksource tsc
<6>[ 14.012253] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 14.015636] Initialise system trusted keyrings
<5>[ 14.015683] Key type blacklist registered
<6>[ 14.016055] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 14.019148] zbud: loaded
<6>[ 14.020007] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 14.020782] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 14.020786] ntfs3: Read-only LZX/Xpress compression included
<6>[ 14.020813] fuse: init (API version 7.41)
<5>[ 14.021574] integrity: Platform Keyring initialized
<5>[ 14.021588] integrity: Machine keyring initialized
<6>[ 14.025491] xor: automatically using best checksumming function avx
<5>[ 14.025497] Key type asymmetric registered
<5>[ 14.025504] Asymmetric key parser 'x509' registered
<6>[ 14.025577] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 14.025996] io scheduler mq-deadline registered
<6>[ 14.026601] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 14.027751] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 14.027847] pcieport 0000:00:07.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 14.030224] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 14.030310] pcieport 0000:00:07.1: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 14.032103] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 14.032202] pcieport 0000:00:07.2: pciehp: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 14.033856] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 14.034296] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 14.035947] Monitor-Mwait will be used to enter C-1 state
<7>[ 14.035953] Monitor-Mwait will be used to enter C-2 state
<7>[ 14.035956] Monitor-Mwait will be used to enter C-3 state
<6>[ 14.048810] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 14.049942] ACPI: button: Lid Switch [LID0]
<6>[ 14.051542] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 14.052657] ACPI: button: Sleep Button [SLPB]
<6>[ 14.055174] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 14.055812] ACPI: button: Power Button [PWRB]
<6>[ 14.382126] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 14.382137] ACPI: thermal: Thermal Zone [TZ00] (51 C)
<6>[ 14.383273] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 14.384673] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 14.386735] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 14.406857] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 14.446899] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 14.449809] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 14.474193] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 14.485653] hpet_acpi_add: no address or irqs in _CRS
<6>[ 14.485919] Linux agpgart interface v0.103
<6>[ 14.521232] loop: module loaded
<6>[ 14.533357] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 14.548952] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 14.567947] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 14.589372] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<6>[ 14.615291] nvme 0000:7f:00.0: platform quirk: setting simple suspend
<6>[ 14.616823] nvme nvme0: pci function 0000:7f:00.0
<6>[ 14.616838] tun: Universal TUN/TAP device driver, 1.6
<6>[ 14.617937] PPP generic driver version 2.4.2
<6>[ 14.619450] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.619601] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 14.620926] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.623609] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.623654] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 14.623684] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.624173] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 14.624207] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.624225] usb usb1: Product: xHCI Host Controller
<6>[ 14.624237] usb usb1: Manufacturer: Linux 6.12.0-rc3-xe xhci-hcd
<6>[ 14.624253] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 14.627415] hub 1-0:1.0: USB hub found
<6>[ 14.627532] hub 1-0:1.0: 1 port detected
<6>[ 14.633059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 14.633079] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.633097] usb usb2: Product: xHCI Host Controller
<6>[ 14.633106] usb usb2: Manufacturer: Linux 6.12.0-rc3-xe xhci-hcd
<6>[ 14.633116] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 14.634531] hub 2-0:1.0: USB hub found
<6>[ 14.634599] hub 2-0:1.0: 3 ports detected
<6>[ 14.652282] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 14.657963] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.658020] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 14.659253] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.660932] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.660956] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 14.660977] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.661193] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 14.661208] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.661218] usb usb3: Product: xHCI Host Controller
<6>[ 14.661225] usb usb3: Manufacturer: Linux 6.12.0-rc3-xe xhci-hcd
<6>[ 14.661234] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 14.661858] nvme0n1: p1 p2
<6>[ 14.662730] hub 3-0:1.0: USB hub found
<6>[ 14.662783] hub 3-0:1.0: 8 ports detected
<6>[ 14.692448] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 14.692471] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.692481] usb usb4: Product: xHCI Host Controller
<6>[ 14.692489] usb usb4: Manufacturer: Linux 6.12.0-rc3-xe xhci-hcd
<6>[ 14.692497] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 14.695332] hub 4-0:1.0: USB hub found
<6>[ 14.695414] hub 4-0:1.0: 2 ports detected
<6>[ 14.707633] usbcore: registered new interface driver usb-storage
<6>[ 14.707847] usbcore: registered new interface driver usbserial_generic
<6>[ 14.707994] usbserial: USB Serial support registered for generic
<6>[ 14.708096] usbcore: registered new interface driver ftdi_sio
<6>[ 14.708165] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 14.708256] usbcore: registered new interface driver pl2303
<6>[ 14.708321] usbserial: USB Serial support registered for pl2303
<6>[ 14.708573] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 14.708591] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 15.564239] i8042: Can't read CTR while initializing i8042
<3>[ 15.564258] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 15.566326] mousedev: PS/2 mouse device common for all mice
<6>[ 15.570503] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 15.573532] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 15.573815] rtc_cmos rtc_cmos: setting system clock to 2024-10-15T12:43:37 UTC (1728996217)
<6>[ 15.574132] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 15.574223] i2c_dev: i2c /dev entries driver
<6>[ 15.580139] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 15.580167] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 15.580186] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 15.580246] device-mapper: uevent: version 1.0.3
<6>[ 15.580911] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 15.581197] platform eisa.0: Probing EISA bus 0
<4>[ 15.581217] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 15.581240] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 15.581263] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 15.581284] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 15.581304] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 15.581325] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 15.581346] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 15.581366] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 15.581387] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 15.581404] platform eisa.0: EISA: Detected 0 cards
<6>[ 15.581420] intel_pstate: Intel P-state driver initializing
<6>[ 15.584944] Hybrid CPU capacity scaling enabled
<6>[ 15.585918] intel_pstate: HWP enabled
<6>[ 15.585925] sdhci: Secure Digital Host Controller Interface driver
<6>[ 15.585932] sdhci: Copyright(c) Pierre Ossman
<6>[ 15.588013] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 15.588206] efifb: probing for efifb
<6>[ 15.588247] efifb: framebuffer at 0x2000800000, using 20252k, total 20250k
<6>[ 15.588255] efifb: mode is 2880x1800x32, linelength=11520, pages=1
<6>[ 15.588262] efifb: scrolling: redraw
<6>[ 15.588266] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
<6>[ 15.588812] Console: switching to colour frame buffer device 180x56
<6>[ 15.593084] fb0: EFI VGA frame buffer device
<6>[ 15.593520] drop_monitor: Initializing network drop monitor service
<6>[ 15.593805] NET: Registered PF_INET6 protocol family
<6>[ 15.597139] Segment Routing with IPv6
<6>[ 15.597266] In-situ OAM (IOAM) with IPv6
<6>[ 15.597327] NET: Registered PF_PACKET protocol family
<5>[ 15.597812] Key type dns_resolver registered
<4>[ 15.601281] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 15.602066] microcode: Current revision: 0x00000115
<6>[ 15.602877] IPI shorthand broadcast: enabled
<6>[ 15.615285] sched_clock: Marking stable (15604002181, 9086436)->(15657409440, -44320823)
<6>[ 15.616099] registered taskstats version 1
<5>[ 15.617483] Loading compiled-in X.509 certificates
<6>[ 15.633167] Demotion targets for Node 0: null
<6>[ 15.633444] kmemleak: Kernel memory leak detector initialized (mem pool available: 15711)
<6>[ 15.633446] kmemleak: Automatic memory scanning thread started
<5>[ 15.634228] Key type .fscrypt registered
<5>[ 15.634345] Key type fscrypt-provisioning registered
<6>[ 15.636779] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 15.639943] Key type encrypted registered
<6>[ 15.640055] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 15.640261] ima: No TPM chip found, activating TPM-bypass!
<5>[ 15.640382] Loading compiled-in module X.509 certificates
<5>[ 15.641078] Loaded X.509 cert 'Build time autogenerated kernel key: ddb072bbdfa684fd5837b4bfc215d885f05af034'
<6>[ 15.641227] ima: Allocated hash algorithm: sha1
<6>[ 15.641289] ima: No architecture policies found
<6>[ 15.641412] evm: Initialising EVM extended attributes:
<6>[ 15.641537] evm: security.selinux
<6>[ 15.641556] evm: security.SMACK64
<6>[ 15.641575] evm: security.SMACK64EXEC
<6>[ 15.641595] evm: security.SMACK64TRANSMUTE
<6>[ 15.642638] evm: security.SMACK64MMAP
<6>[ 15.643665] evm: security.apparmor
<6>[ 15.644679] evm: security.ima
<6>[ 15.645711] evm: security.capability
<6>[ 15.646720] evm: HMAC attrs: 0x1
<6>[ 15.649836] PM: Magic number: 12:109:734
<6>[ 15.650958] hwmon hwmon1: hash matches
<6>[ 15.652201] printk: legacy console [netcon0] enabled
<6>[ 15.653344] netconsole: network logging started
<6>[ 15.655080] RAS: Correctable Errors collector initialized.
<6>[ 15.656404] clk: Disabling unused clocks
<6>[ 15.658351] PM: genpd: Disabling unused power domains
<6>[ 15.659696] md: Waiting for all devices to be available before autodetect
<6>[ 15.660878] md: If you don't use raid, use raid=noautodetect
<6>[ 15.662568] md: Autodetecting RAID arrays.
<6>[ 15.663744] md: autorun ...
<6>[ 15.664832] md: ... autorun DONE.
<6>[ 15.705308] EXT4-fs (nvme0n1p2): mounted filesystem f759a4d4-0fa4-47c1-9d9b-f58f114e0a71 ro with ordered data mode. Quota mode: none.
<6>[ 15.706559] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 15.708728] devtmpfs: mounted
<6>[ 15.723029] Freeing unused decrypted memory: 2036K
<6>[ 15.725060] Freeing unused kernel image (initmem) memory: 5552K
<6>[ 15.726417] Write protecting the kernel read-only data: 34816k
<6>[ 15.728345] Freeing unused kernel image (rodata/data gap) memory: 1384K
<6>[ 15.733458] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 15.734697] Run /sbin/init as init process
<7>[ 15.735817] with arguments:
<7>[ 15.735818] /sbin/init
<7>[ 15.735818] with environment:
<7>[ 15.735819] HOME=/
<7>[ 15.735820] TERM=linux
<7>[ 15.735821] BOOT_IMAGE=/boot/drm_intel
<7>[ 15.776742] systemd[1]: Inserted module 'autofs4'
<7>[ 15.795230] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 15.799329] systemd[1]: Detected architecture x86-64.
<6>[ 15.801540] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
<7>[ 15.807545] systemd[1]: Hostname set to <shard-lnl-3>.
<6>[ 15.822554] usb 4-2: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=31.00
<6>[ 15.823917] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=6
<6>[ 15.825215] usb 4-2: Product: USB 10/100/1G/2.5G LAN
<6>[ 15.826481] usb 4-2: Manufacturer: Realtek
<6>[ 15.827732] usb 4-2: SerialNumber: 001000001
<7>[ 15.980018] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 15.983333] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 16.045333] systemd[1]: Queued start job for default target graphical.target.
<7>[ 16.096258] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 16.103278] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 16.107853] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 16.111243] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 16.115162] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 16.118978] systemd[1]: Expecting device dev-disk-by\x2duuid-481C\x2d2D4A.device - /dev/disk/by-uuid/481C-2D4A...
<7>[ 16.122791] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 16.126604] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 16.130719] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 16.134638] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 16.138614] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 16.142918] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 16.147437] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 16.151909] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 16.156412] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 16.160824] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 16.165290] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 16.169911] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 16.174617] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 16.179196] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 16.183642] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.186149] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 16.190784] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 16.233929] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 16.243996] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 16.251411] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 16.258816] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 16.268478] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 16.275620] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 16.283038] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 16.290406] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 16.297763] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 16.298620] systemd-journald[200]: Collecting audit messages is disabled.
<7>[ 16.308889] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 16.317033] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 16.325738] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 16.332715] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 16.339589] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 16.347054] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 16.351802] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 16.357451] pstore: Using crash dump compression: deflate
<7>[ 16.360054] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 16.360282] ACPI: bus type drm_connector registered
<6>[ 16.361672] pstore: Registered efi_pstore as persistent store backend
<7>[ 16.372568] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 16.377110] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.379337] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.385007] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 16.393684] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 16.621073] EXT4-fs (nvme0n1p2): re-mounted f759a4d4-0fa4-47c1-9d9b-f58f114e0a71 r/w. Quota mode: none.
<6>[ 16.679956] Adding 8388604k swap on /swap.img. Priority:-2 extents:52 across:433217532k SS
<7>[ 16.697256] systemd-journald[200]: Received client request to flush runtime journal.
<7>[ 16.712578] systemd-journald[200]: /var/log/journal/78833d7dfe2d4e2fb998725030f36ed0/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 16.712589] systemd-journald[200]: Rotating system journal.
<6>[ 17.391919] mc: Linux media interface: v0.10
<4>[ 17.397213] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.397317] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.413257] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 17.423582] Consider using thermal netlink events interface
<6>[ 17.426823] videodev: Linux video capture interface: v2.00
<4>[ 17.434386] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.434547] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.450513] pci 0000:00:05.0: Setting to D3hot
<6>[ 17.462159] pci 0000:00:0b.0: Setting to D3hot
<4>[ 17.472948] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.472966] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.473224] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 17.473521] intel_pmc_core INT33A1:00: initialized
<6>[ 17.477365] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 17.488864] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 17.516134] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 17.548683] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.548717] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.653463] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.653496] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<5>[ 17.655565] audit: type=1400 audit(1728996219.575:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=369 comm="apparmor_parser"
<5>[ 17.657289] audit: type=1400 audit(1728996219.579:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=371 comm="apparmor_parser"
<5>[ 17.657632] audit: type=1400 audit(1728996219.579:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=376 comm="apparmor_parser"
<5>[ 17.658253] audit: type=1400 audit(1728996219.579:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=370 comm="apparmor_parser"
<5>[ 17.658728] audit: type=1400 audit(1728996219.579:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=372 comm="apparmor_parser"
<5>[ 17.659015] audit: type=1400 audit(1728996219.579:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=368 comm="apparmor_parser"
<5>[ 17.659267] audit: type=1400 audit(1728996219.579:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=375 comm="apparmor_parser"
<5>[ 17.659490] audit: type=1400 audit(1728996219.579:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=374 comm="apparmor_parser"
<5>[ 17.661226] audit: type=1400 audit(1728996219.583:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=377 comm="apparmor_parser"
<5>[ 17.663795] audit: type=1400 audit(1728996219.583:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=378 comm="apparmor_parser"
<4>[ 17.767714] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.767735] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.888483] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.888510] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.970191] ACPI: bus type thunderbolt registered
<6>[ 18.078335] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 18.078341] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 18.082358] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 18.082425] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 18.083431] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 18.096192] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 18.109587] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 18.125616] idma64 idma64.3: Found Intel integrated DMA 64-bit
<4>[ 18.140708] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.140735] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.203190] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.203219] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.255207] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 18.267390] intel_rapl_common: Found RAPL domain package
<6>[ 18.267398] intel_rapl_common: Found RAPL domain dram
<6>[ 18.278561] usbcore: registered new device driver r8152-cfgselector
<6>[ 18.356640] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 18.356645] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 18.356647] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 18.356648] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 18.356649] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 18.377973] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 18.378104] cryptd: max_cpu_qlen set to 1000
<6>[ 18.424641] AES CTR mode by8 optimization enabled
<4>[ 18.489917] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.489947] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.535818] r8152-cfgselector 4-2: reset SuperSpeed USB device number 2 using xhci_hcd
<4>[ 18.599392] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.599414] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.633461] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<4>[ 18.653014] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.653042] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.660938] r8152 4-2:1.0 eth0: v1.12.13
<6>[ 18.661050] usbcore: registered new interface driver r8152
<6>[ 18.718562] intel_rapl_common: Found RAPL domain package
<6>[ 18.718568] intel_rapl_common: Found RAPL domain core
<6>[ 18.718589] usbcore: registered new interface driver cdc_ether
<6>[ 18.718899] intel_rapl_common: Found RAPL domain dram
<6>[ 18.718901] intel_rapl_common: Found RAPL domain psys
<6>[ 18.727825] usbcore: registered new interface driver cdc_ncm
<4>[ 18.730755] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.730782] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.732261] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:34:25
<6>[ 18.732267] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 18.732400] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 18.780145] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<4>[ 18.784637] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.784671] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.810089] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 18.863596] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<4>[ 18.888635] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.888665] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.918046] block nvme0n1: No UUID available providing old NGUID
<5>[ 18.934222] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 18.934236] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 18.970896] r8152 4-2:1.0 enx00e04c402a2b: renamed from eth0
<4>[ 18.996676] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.996719] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 19.042549] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.042576] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 19.124442] evm: overlay not supported
<4>[ 19.303567] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.303603] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 19.359036] loop0: detected capacity change from 0 to 8
<6>[ 19.843923] hid: raw HID events driver (C) Jiri Kosina
<6>[ 19.850635] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 19.894339] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.896402] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.898789] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.899914] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.901914] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.902884] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.908390] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.912900] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.916834] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.920127] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.922043] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.923634] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<4>[ 19.939161] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.939188] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 20.031022] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 20.031057] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 20.089730] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 20.089766] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 21.122886] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 21.122912] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 21.931190] r8152 4-2:1.0 enx00e04c402a2b: carrier on
<6>[ 26.775229] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 26.775286] typec port0: bound usb2-port1 (ops connector_ops)
<4>[ 30.322893] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 30.322907] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 30.323701] platform INT3472:01: deferred probe pending: int3472-discrete: Failed to get GPIO
<7>[ 31.490020] systemd-journald[200]: /var/log/journal/78833d7dfe2d4e2fb998725030f36ed0/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<6>[ 38.884002] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 38.884035] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 55.749983] Console: switching to colour dummy device 80x25
<7>[ 55.750029] [IGT] xe_module_load: executing
<7>[ 55.756064] [IGT] xe_module_load: starting subtest load
<6>[ 55.907834] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 55.909324] xe 0000:00:02.0: [drm] Found LUNARLAKE (device ID 64a0) display version 20.00 stepping B0
<7>[ 55.909336] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 55.909437] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 55.909525] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 55.922838] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.29.2
<7>[ 55.926380] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x0024e3d7
<7>[ 55.926458] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 55.926518] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 55.926575] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7>[ 55.926630] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006c2
<7>[ 55.926684] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 55.926736] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 55.926788] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 55.926838] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 55.926889] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 55.926940] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 55.926990] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 55.927038] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 55.927085] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 55.927132] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 55.927215] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 55.928301] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 55.933203] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 55.933317] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 55.936088] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 55.936880] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 55.936958] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 55.937051] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000fe
<7>[ 55.937135] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000000fe
<7>[ 55.937201] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 55.937263] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 55.937324] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 55.938072] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.29.2
<7>[ 55.941647] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c563d7
<7>[ 55.941705] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 55.941755] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 55.941806] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000003
<7>[ 55.941856] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ad2
<7>[ 55.941907] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 55.941952] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 55.941994] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 55.942035] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 55.942076] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 55.942117] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 55.942157] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 55.942197] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 55.942237] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 55.943376] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 55.945058] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1161
<6>[ 55.946027] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 55.946094] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 55.946179] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 55.947594] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 55.947809] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 55.965268] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 17ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 55.965766] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 55.965929] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 55.966092] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 55.966243] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 55.966384] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 55.966522] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 55.966657] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 55.966825] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 55.967152] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 55.967352] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 55.967546] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 55.967743] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 55.967936] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 55.968168] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 55.968407] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 55.968676] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 55.968919] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 55.969196] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 55.969452] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 55.969696] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 55.969930] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 55.970150] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 55.970356] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 55.970558] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 55.970754] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 55.970951] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 55.971151] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 55.971353] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 55.971553] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 55.971799] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 55.972008] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 55.972202] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 55.972397] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 55.972593] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 55.972815] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 55.973018] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 55.973244] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 55.973442] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 55.973634] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 55.973864] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 55.974061] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 55.974247] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 55.974425] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 55.974599] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 55.974771] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 55.974985] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 55.975932] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 55.976218] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 55.976465] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 55.976709] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 55.976921] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 55.977147] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 55.977359] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 55.977605] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 55.977801] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 55.978003] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 55.978200] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 55.978373] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 55.978543] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 55.978711] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 55.978910] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 55.979095] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 55.979260] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 55.979425] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 55.979590] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 55.979765] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 55.979990] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 55.980185] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 55.980382] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 55.980546] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 55.980709] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 55.980869] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 55.981027] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 55.981234] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 55.981527] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 55.981854] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 55.982188] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 55.982496] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 55.982851] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 55.983135] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 55.983425] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 55.983663] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 55.983932] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 55.984162] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
<7>[ 55.984201] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 55.984464] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 55.984671] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 55.984876] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 55.985667] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 55.985957] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 55.987168] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 55.991028] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 55.991223] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 55.991393] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 55.991554] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 55.991701] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 55.991845] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x578856c4 (EVT_HTP)
<7>[ 55.991997] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 55.992128] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 55.992254] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 55.992376] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 55.992492] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 55.992605] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 55.992720] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 55.992829] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 55.992931] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 55.993035] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 55.993156] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 55.993187] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 55.993259] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 55.993362] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 55.993400] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 55.993458] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 55.993528] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 55.993558] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 55.993638] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 55.993656] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 55.993741] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 55.993751] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 55.993838] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 55.993844] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 55.993928] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 55.994018] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 55.999040] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 56.003460] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 56.003635] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 56.003797] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 56.004033] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 56.004263] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<6>[ 56.004617] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.21)
<7>[ 56.004598] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 56.004856] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 56.005069] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 56.005329] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 56.005539] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 56.005731] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 56.005922] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 56.006112] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 56.006300] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 56.006530] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 56.006796] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 56.006999] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 56.007193] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 56.007377] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 56.007554] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 56.007761] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 56.008020] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 56.009180] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 56.009457] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 56.013086] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 56.013788] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 56.014666] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85
<7>[ 56.015765] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 56.016379] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 56.018745] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 56.030174] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 56.030230] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.030232] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.030234] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 56.030272] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.030274] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 56.030309] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.030311] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 56.030341] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.030384] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.030386] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.030387] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.030397] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 56.030993] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 56.031580] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 56.031688] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 56.031821] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 56.031956] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 56.032121] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 56.032201] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 56.032275] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 56.032347] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 56.032418] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 56.032523] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 56.032691] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 56.032842] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 56.032954] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 56.033902] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 56.034018] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 56.034124] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 56.034326] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 56.034429] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 56.034522] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 56.034871] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 56.034992] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 56.035101] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 56.035177] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 56.035248] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 56.035318] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 56.035388] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 56.035455] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 56.035521] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 56.035586] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 56.035650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 56.035712] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 56.035774] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 56.035834] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 56.035894] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 56.035952] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 56.036010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 56.036068] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 56.036124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 56.036182] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 56.036239] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 56.036994] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 56.037087] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 56.037534] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 56.037739] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 56.037739] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 56.037804] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 56.037867] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 56.037927] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 56.037989] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 56.038053] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 56.038110] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 56.038168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 56.038223] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 56.038282] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 56.038341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 56.038398] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 56.038455] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 56.038513] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 56.038613] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 56.038686] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 56.038753] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 56.038819] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 56.038976] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 56.039034] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 56.039089] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 56.039142] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 56.039193] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 56.039244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 56.039295] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 56.039377] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 56.039439] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 56.039498] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 56.039556] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 56.039613] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 56.039673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 56.039731] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 56.039819] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 56.039880] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 56.039937] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 56.039989] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 56.040040] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 56.040090] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 56.040141] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 56.040326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 56.040417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 56.040504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 56.040585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 56.040657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 56.040727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 56.040795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 56.040863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 56.040929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 56.040993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 56.041057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 56.041134] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 56.041216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 56.041295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 56.041375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, pipeline full: 0, guardband: 105 flipline: 1906, vmin vblank: 1802, vmax vblank: 1801
<7>[ 56.041449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 56.041517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 56.041587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 56.041657] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 56.041726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 56.041791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 56.041857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 56.041918] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 56.041976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 56.042032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 56.042088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 56.042144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 56.042198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 56.042252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 56.042309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.042367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.042426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.042485] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 56.042542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 56.042597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.042651] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.042705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.042756] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 56.042808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 56.042860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 56.043059] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 56.043136] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 56.043211] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 56.043444] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 56.043514] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 56.069314] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 56.277268] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 56.277272] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 56.277273] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 56.278111] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 56.278208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 56.278289] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 56.278360] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 56.278427] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 56.278493] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 56.278555] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 56.278619] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 56.278677] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 56.278734] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 56.278792] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 56.278849] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 56.278903] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 56.278958] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 56.279015] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 56.279070] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 56.279124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 56.279177] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 56.279229] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 56.279279] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 56.279329] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 56.279376] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 56.279424] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 56.279472] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 56.279520] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 56.279564] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 56.279618] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 56.279673] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 56.279727] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 56.279785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 56.279844] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 56.279900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 56.279954] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 56.280012] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 56.280068] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 56.280121] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting rcs0 registers
<7>[ 56.280170] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 56.280218] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 56.280264] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 56.280452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 56.280515] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 56.280569] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 56.280855] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 56.280908] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 56.280961] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 56.281147] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 56.281194] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7>[ 56.281241] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 56.281288] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting ccs0 registers
<7>[ 56.281337] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 56.281383] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 56.281428] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 56.281755] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x0024e3d7
<7>[ 56.281814] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 56.281869] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000004
<7>[ 56.281923] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7>[ 56.281976] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006c2
<7>[ 56.282028] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 56.282079] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 56.282128] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 56.282176] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 56.282222] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 56.282267] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 56.282311] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 56.282355] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 56.282398] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 56.282457] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 56.282589] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 56.284433] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 56.306738] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 56.307529] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 56.307600] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 56.313095] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 56.314542] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000634 [0x1A/06]
<7>[ 56.314773] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 56.315060] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 56.315621] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 56.315679] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 56.315737] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 56.315793] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 56.315855] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 56.315912] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 56.315969] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 56.316023] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 56.316074] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 56.319028] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 56.319107] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 56.319175] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 56.320700] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 56.323108] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 56.323110] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 56.323111] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 56.323111] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 56.323112] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 56.323113] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 56.323113] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 56.323114] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 56.323115] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 56.323116] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 56.323675] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 56.323778] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 56.323857] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 56.323926] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 56.323992] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 56.324057] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 56.324118] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 56.324180] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 56.324240] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 56.324299] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 56.324358] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 56.324418] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 56.324479] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 56.324538] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 56.324597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 56.324657] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 56.324714] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 56.324771] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 56.324825] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 56.324880] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 56.324933] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 56.324986] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 56.325039] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 56.325090] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 56.325140] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 56.325189] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 56.325251] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 56.326161] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 56.326246] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 56.326706] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 56.326788] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 56.327428] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c563d7
<7>[ 56.327512] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 56.327592] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000004
<7>[ 56.327670] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000003
<7>[ 56.327745] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ad2
<7>[ 56.327818] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 56.327893] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 56.327968] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 56.328038] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 56.328107] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 56.328174] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 56.328240] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 56.328305] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 56.328370] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 56.328456] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 56.328560] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 56.355119] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 56.356264] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 56.356404] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 56.376708] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 56.377139] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 56.377923] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 56.380444] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 56.382238] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 56.421292] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 56.422604] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 56.422938] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 56.423228] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 56.423483] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 56.423716] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 56.424000] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 56.424285] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 56.424591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 56.424874] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 56.425788] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 56.426119] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 56.426346] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 56.433070] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 56.437778] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 56.443253] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 56.444031] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 56.446261] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 56.446415] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 56.447011] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 56.447847] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 56.447916] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 56.448343] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 56.449119] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 56.449182] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 56.449535] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 56.449984] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 56.450027] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 56.450058] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 56.457954] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 56.460712] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 56.461917] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 56.462044] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 56.463430] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 56.463558] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 56.463660] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 56.463749] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 56.463859] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 56.463911] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 56.463966] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 56.464014] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 56.464064] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 56.464110] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 56.464190] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 56.464203] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 56.464313] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 56.464410] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
<7>[ 56.464966] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<7>[ 56.465297] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 56.465325] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 56.466955] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 56.467506] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 56.467619] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 56.467719] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 56.467980] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 56.468017] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.468020] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.468021] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 56.468077] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.468079] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 56.468102] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.468104] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 56.468124] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.468171] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 56.468282] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 56.468955] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 56.469056] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 56.469536] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 56.469926] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.469929] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 56.469931] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 56.469979] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 56.469991] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 56.470002] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 56.470013] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 56.470166] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 56.470179] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 56.470188] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 56.470314] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 56.470325] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 56.470334] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 56.470456] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 56.470467] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 56.470493] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 56.470512] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 56.470530] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 56.470776] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 56.470817] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 56.470835] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 56.470852] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 56.470869] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 16384x16384 config
<7>[ 56.470896] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 56.470941] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 56.471013] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<4>[ 56.482633] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 56.482649] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 56.495238] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
<7>[ 56.498746] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d72000
<6>[ 56.499691] fbcon: xedrmfb (fb0) is primary device
<7>[ 56.500568] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 56.500679] xe 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 56.500770] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 56.500873] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 56.500985] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 56.501091] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 56.501182] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 56.501263] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 56.501341] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 56.501416] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 56.501491] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 56.501575] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 56.501662] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 56.501749] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 56.501840] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 56.501940] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 56.502039] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 56.502136] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 56.502216] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 56.502291] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 56.502364] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 56.502438] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 56.502510] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 56.502583] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 56.502653] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 56.502723] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 56.502794] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 56.502864] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 56.502934] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 56.503007] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 56.503078] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 56.503155] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 56.503231] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 56.503580] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 56.503674] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 56.503766] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 56.503868] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 56.503955] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 56.504041] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 56.504125] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.504209] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.504291] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.504372] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 56.504452] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.504533] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.504615] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.504694] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 56.504771] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.504847] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.504921] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.505000] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 56.505081] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.505154] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.505223] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.505291] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 56.505359] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.505427] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.505493] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 56.505560] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 56.505675] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 56.505772] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 56.505854] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 56.505937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 56.506013] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 56.506104] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 56.506198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 56.506279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 56.506357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 56.506432] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 56.506507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 56.506578] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 56.506646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 56.506715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 56.506782] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 56.506851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 56.506921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 56.506989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 56.507059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 56.507127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 56.507196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 56.507303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 56.507388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 56.507471] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 56.507552] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 56.507632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 56.507697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1905, vmax: 2859, pipeline full: 0, guardband: 106 flipline: 1906, vmin vblank: 1800, vmax vblank: 2753
<7>[ 56.507762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 56.507826] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 56.507888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 56.507949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 56.508010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 56.508070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 56.508130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 56.508191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 56.508251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 56.508314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 56.508380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 56.508444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 56.508505] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 56.508566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 56.508625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.508683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.508741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.508799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 56.508857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 56.508914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.508979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.509046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 56.509115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 56.509182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 56.509256] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 56.509329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 56.509399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 56.509459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 56.509522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 56.509580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 56.509636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 56.517431] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 56.524225] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 56.524343] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 56.546901] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 56.718453] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 56.719915] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 56.738639] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 56.738710] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 56.739045] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 56.739107] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 56.739434] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 56.791781] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 56.792036] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 56.816066] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 56.816404] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 56.816469] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 56.817097] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 56.817111] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 56.817368] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 56.817615] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 56.817822] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 56.818019] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 56.818210] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 56.818396] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 56.818581] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 56.818762] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 56.818974] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 56.819159] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 56.819339] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 56.819508] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 56.819676] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 56.819879] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 56.821402] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 56.821657] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle
<7>[ 56.828696] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 56.828899] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 56.829064] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 56.829259] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 56.971037] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 57.427615] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 57.427994] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 57.428285] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 57.428590] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 57.462983] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 57.463025] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 57.463139] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 57.464932] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 57.465229] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 57.465487] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 57.465882] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 57.729711] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 57.732884] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 57.733242] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 57.735559] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 57.736850] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 57.737931] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 57.739120] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 57.740264] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 57.742209] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 57.742542] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 57.744736] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 57.745163] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 57.745976] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 57.746478] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 57.746806] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 57.747165] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 57.749122] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 57.749146] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 57.749483] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 57.763276] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 57.765751] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 57.766118] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 57.767485] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<7>[ 57.769539] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 57.769965] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<6>[ 57.770172] Console: switching to colour frame buffer device 180x56
<6>[ 57.784108] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 57.804357] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 57.804713] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 57.805010] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 57.805298] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 57.805454] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 57.805497] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<7>[ 57.805582] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 57.805850] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 57.806123] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 57.806107] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 57.806187] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 57.806353] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 57.806597] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 57.806838] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 57.807286] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 57.807520] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 57.807749] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 57.807732] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 57.807979] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 57.808240] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 57.808465] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 57.808592] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 57.808689] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 57.808911] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 57.808975] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 57.809145] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 57.809295] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 57.809388] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 57.809678] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 57.809898] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 57.809991] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 57.809996] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.809908] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 57.810001] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 57.810077] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.810081] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 57.810153] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.810158] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 57.810226] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.810279] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 57.810607] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 57.811689] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 57.811987] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 57.812840] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 57.812845] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 57.812849] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.812931] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 57.812820] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 57.812975] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 57.813005] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 57.813031] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 57.813162] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 57.813507] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 57.814270] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 57.814620] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 57.814977] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 57.815405] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 57.815747] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 57.816054] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 57.816412] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 57.816738] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 57.816774] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 57.816802] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 57.817139] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 57.817393] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 57.817414] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 57.817432] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 57.817678] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 57.817901] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 57.817920] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 57.817964] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 57.818001] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 57.818036] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 57.818171] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 57.818264] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 57.818352] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 57.818421] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 57.818484] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 57.818545] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 2880x1800 config
<7>[ 57.818643] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 57.823102] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 57.823410] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 57.830181] xe 0000:00:02.0: [drm:drm_client_dev_hotplug [drm]] intel-fbdev: ret=0
<7>[ 57.830557] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 57.830624] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<6>[ 57.831580] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<7>[ 57.832115] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 57.832207] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 57.833925] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 57.834983] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 57.835283] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 57.835569] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 57.836301] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 57.836377] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 57.836381] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.836384] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 57.836441] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.836444] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 57.836497] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.836499] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 57.836547] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.836594] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 57.836803] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 57.837993] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 57.838178] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 57.842148] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 57.842157] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 57.842202] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 57.842348] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 57.842444] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 57.842482] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 57.842527] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 57.842959] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 57.842995] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 57.843022] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 57.843303] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 57.843313] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 57.843322] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 57.843444] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 57.843454] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 57.843500] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 57.843521] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 57.843542] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 57.844160] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 57.844235] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 57.844260] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 57.844282] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 57.844304] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 2880x1800 config
<7>[ 57.844361] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<6>[ 57.845669] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [xe])
<7>[ 57.852743] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 57.853097] xe 0000:00:02.0: [drm:i915_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 57.863772] xe 0000:00:02.0: [drm:drm_client_dev_hotplug [drm]] intel-fbdev: ret=0
<4>[ 57.877134] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 57.877157] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 57.886297] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 57.886384] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 57.886447] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 57.886509] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 57.886569] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 57.886628] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 57.886687] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 57.886745] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 57.886804] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 57.886862] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 57.886919] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 57.886975] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 57.887030] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 57.887085] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 57.887139] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 57.887191] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 57.887244] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 57.887295] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 57.887347] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 57.887398] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 57.887449] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 57.887499] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 57.887550] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 57.887600] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 57.887650] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 57.887699] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 57.887748] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 57.887800] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 57.887849] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 57.887897] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 57.887946] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 57.887994] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 57.888042] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 57.888091] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 57.888139] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 57.888188] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<6>[ 57.893523] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 57.897566] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<7>[ 57.898410] xe 0000:00:02.0: [drm:drm_client_dev_restore [drm]] intel-fbdev: ret=0
<6>[ 57.898471] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<7>[ 57.898543] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 57.898608] [IGT] xe_module_load: exiting, ret=0
<6>[ 57.899500] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<4>[ 57.910313] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 57.910340] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 57.916833] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 57.916983] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 57.917072] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<4>[ 57.933420] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 57.933436] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 58.840297] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 58.840350] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 58.840350] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 58.947099] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 60.922338] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 60.922651] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067