<5>[ 0.000000] Linux version 6.12.0-rc2-xe (builder@lgci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Wed Oct 9 20:58:30 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cb59fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cb5a000-0x000000006fed2fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fed3000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001043fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cc32000 MEMATTR=0x68eb8198 ESRT=0x68677198 MOKvar=0x6cd66000
<6>[ 0.000000] efi: Remove mem253: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem255: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D89.2409021714 09/02/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000012] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000015] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000016] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000328] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000329] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004157] esrt: Reserving ESRT space from 0x0000000068677198 to 0x00000000686772e8.
<7>[ 0.004164] e820: update [mem 0x68677000-0x68677fff] usable ==> reserved
<6>[ 0.004182] Using GB pages for direct mapping
<6>[ 0.004818] printk: log_buf_len: 1048576 bytes
<6>[ 0.004819] printk: early log buf free: 258968(98%)
<6>[ 0.004819] Secure boot disabled
<6>[ 0.004821] ACPI: Early table checksum verification disabled
<6>[ 0.004823] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.004826] ACPI: XSDT 0x000000006FF7D228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004829] ACPI: FACP 0x000000006FFAC000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.004832] ACPI: DSDT 0x000000006FFB8000 024FCF (v02 INTEL LNL 00000002 01000013)
<6>[ 0.004834] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.004835] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.004837] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.004838] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.004839] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.004840] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.004842] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.004843] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.004845] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.004846] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.004847] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.004848] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.004850] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.004851] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.004852] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.004854] ACPI: SSDT 0x000000006FFDE000 008E92 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.004855] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.004856] ACPI: SSDT 0x000000006FFB3000 004A7D (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.004857] ACPI: SSDT 0x000000006FFB1000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.004859] ACPI: SSDT 0x000000006FFAD000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.004860] ACPI: HPET 0x000000006FFAB000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004861] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004862] ACPI: APIC 0x000000006FFA9000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.004864] ACPI: MCFG 0x000000006FFA8000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004865] ACPI: SSDT 0x000000006FFA7000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.004866] ACPI: SSDT 0x000000006FFA1000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.004867] ACPI: SSDT 0x000000006FF96000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.004869] ACPI: LPIT 0x000000006FF95000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004870] ACPI: SSDT 0x000000006FF94000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.004871] ACPI: SSDT 0x000000006FF93000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.004872] ACPI: DBGP 0x000000006FF92000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004874] ACPI: DBG2 0x000000006FF91000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004875] ACPI: NHLT 0x000000006FF90000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004876] ACPI: SSDT 0x000000006FF8E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.004877] ACPI: SSDT 0x000000006FF87000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.004879] ACPI: ECDT 0x000000006FF86000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.004880] ACPI: DMAR 0x000000006FF85000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004881] ACPI: FPDT 0x000000006FF84000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004883] ACPI: SSDT 0x000000006FF83000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.004884] ACPI: SSDT 0x000000006FF81000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.004885] ACPI: SSDT 0x000000006FF7E000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.004886] ACPI: SDEV 0x000000006FFAA000 000046 (v01 00000000 00000000)
<6>[ 0.004888] ACPI: SSDT 0x000000006FF72000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.004889] ACPI: SSDT 0x000000006FF64000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.004890] ACPI: ASF! 0x000000006FF63000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.004891] ACPI: PHAT 0x000000006FF62000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.004893] ACPI: BGRT 0x000000006FF61000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004894] ACPI: Reserving FACP table memory at [mem 0x6ffac000-0x6ffac113]
<6>[ 0.004895] ACPI: Reserving DSDT table memory at [mem 0x6ffb8000-0x6ffdcfce]
<6>[ 0.004895] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.004895] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.004896] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.004896] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.004896] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.004897] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.004897] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.004897] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.004897] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.004898] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.004898] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.004898] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.004899] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.004899] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.004899] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.004899] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6e91]
<6>[ 0.004900] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.004900] ACPI: Reserving SSDT table memory at [mem 0x6ffb3000-0x6ffb7a7c]
<6>[ 0.004900] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb240e]
<6>[ 0.004901] ACPI: Reserving SSDT table memory at [mem 0x6ffad000-0x6ffb0955]
<6>[ 0.004901] ACPI: Reserving HPET table memory at [mem 0x6ffab000-0x6ffab037]
<6>[ 0.004901] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.004902] ACPI: Reserving APIC table memory at [mem 0x6ffa9000-0x6ffa90d7]
<6>[ 0.004902] ACPI: Reserving MCFG table memory at [mem 0x6ffa8000-0x6ffa803b]
<6>[ 0.004902] ACPI: Reserving SSDT table memory at [mem 0x6ffa7000-0x6ffa76e2]
<6>[ 0.004903] ACPI: Reserving SSDT table memory at [mem 0x6ffa1000-0x6ffa6320]
<6>[ 0.004903] ACPI: Reserving SSDT table memory at [mem 0x6ff96000-0x6ffa0469]
<6>[ 0.004903] ACPI: Reserving LPIT table memory at [mem 0x6ff95000-0x6ff950cb]
<6>[ 0.004903] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff94d5b]
<6>[ 0.004904] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff931ef]
<6>[ 0.004904] ACPI: Reserving DBGP table memory at [mem 0x6ff92000-0x6ff92033]
<6>[ 0.004904] ACPI: Reserving DBG2 table memory at [mem 0x6ff91000-0x6ff91053]
<6>[ 0.004905] ACPI: Reserving NHLT table memory at [mem 0x6ff90000-0x6ff902e2]
<6>[ 0.004905] ACPI: Reserving SSDT table memory at [mem 0x6ff8e000-0x6ff8f15b]
<6>[ 0.004905] ACPI: Reserving SSDT table memory at [mem 0x6ff87000-0x6ff8d53a]
<6>[ 0.004905] ACPI: Reserving ECDT table memory at [mem 0x6ff86000-0x6ff86068]
<6>[ 0.004906] ACPI: Reserving DMAR table memory at [mem 0x6ff85000-0x6ff850d7]
<6>[ 0.004906] ACPI: Reserving FPDT table memory at [mem 0x6ff84000-0x6ff84043]
<6>[ 0.004906] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff8386c]
<6>[ 0.004907] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff82121]
<6>[ 0.004907] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff80462]
<6>[ 0.004907] ACPI: Reserving SDEV table memory at [mem 0x6ffaa000-0x6ffaa045]
<6>[ 0.004908] ACPI: Reserving SSDT table memory at [mem 0x6ff72000-0x6ff7c4f9]
<6>[ 0.004908] ACPI: Reserving SSDT table memory at [mem 0x6ff64000-0x6ff71815]
<6>[ 0.004908] ACPI: Reserving ASF! table memory at [mem 0x6ff63000-0x6ff63073]
<6>[ 0.004909] ACPI: Reserving PHAT table memory at [mem 0x6ff62000-0x6ff626df]
<6>[ 0.004909] ACPI: Reserving BGRT table memory at [mem 0x6ff61000-0x6ff61037]
<6>[ 0.004969] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005171] No NUMA configuration found
<6>[ 0.005171] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005177] NODE_DATA(0) allocated [mem 0x87f353100-0x87f37dfff]
<6>[ 0.005287] Zone ranges:
<6>[ 0.005287] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005288] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005289] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005290] Device empty
<6>[ 0.005290] Movable zone start for each node
<6>[ 0.005291] Early memory node ranges
<6>[ 0.005291] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005292] node 0: [mem 0x0000000000100000-0x000000006cb59fff]
<6>[ 0.005292] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005293] node 0: [mem 0x0000000104400000-0x000000087f7fffff]
<6>[ 0.005294] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005298] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005316] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007299] On node 0, zone DMA32: 13477 pages in unavailable ranges
<6>[ 0.035669] On node 0, zone Normal: 17408 pages in unavailable ranges
<6>[ 0.035735] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036193] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036199] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.036249] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.036251] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.036252] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.036254] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.036255] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.036265] e820: update [mem 0x69061000-0x6907bfff] usable ==> reserved
<6>[ 0.036271] TSC deadline timer available
<6>[ 0.036273] CPU topo: Max. logical packages: 1
<6>[ 0.036274] CPU topo: Max. logical dies: 1
<6>[ 0.036274] CPU topo: Max. dies per package: 1
<6>[ 0.036275] CPU topo: Max. threads per core: 1
<6>[ 0.036276] CPU topo: Num. cores per package: 8
<6>[ 0.036276] CPU topo: Num. threads per package: 8
<6>[ 0.036276] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.036288] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.036290] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.036290] PM: hibernation: Registered nosave memory: [mem 0x68677000-0x68677fff]
<6>[ 0.036291] PM: hibernation: Registered nosave memory: [mem 0x69061000-0x6907bfff]
<6>[ 0.036292] PM: hibernation: Registered nosave memory: [mem 0x6cb5a000-0x6fed2fff]
<6>[ 0.036292] PM: hibernation: Registered nosave memory: [mem 0x6fed3000-0x6ff4ffff]
<6>[ 0.036293] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.036294] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.036294] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.036294] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.036294] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.036295] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1043fffff]
<6>[ 0.036296] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.036297] Booting paravirtualized kernel on bare hardware
<6>[ 0.036299] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
<6>[ 0.036307] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.036645] percpu: Embedded 69 pages/cpu s245760 r8192 d28672 u524288
<7>[ 0.036649] pcpu-alloc: s245760 r8192 d28672 u524288 alloc=1*2097152
<7>[ 0.036651] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.036664] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<5>[ 0.036731] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.036745] random: crng init done
<6>[ 0.038591] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.039508] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.039562] Fallback order for Node 0: 0
<6>[ 0.039565] Built 1 zonelists, mobility grouping on. Total pages: 8290041
<6>[ 0.039565] Policy zone: Normal
<6>[ 0.039574] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.039575] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.039576] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.040501] software IO TLB: area num 8.
<4>[ 0.085241] **********************************************************
<4>[ 0.085242] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085242] ** **
<4>[ 0.085242] ** This system shows unhashed kernel memory addresses **
<4>[ 0.085243] ** via the console, logs, and other interfaces. This **
<4>[ 0.085243] ** might reduce the security of your system. **
<4>[ 0.085243] ** **
<4>[ 0.085243] ** If you see this message and you are not debugging **
<4>[ 0.085243] ** the kernel, report this immediately to your system **
<4>[ 0.085243] ** administrator! **
<4>[ 0.085244] ** **
<4>[ 0.085244] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085244] **********************************************************
<6>[ 0.085541] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.085867] ftrace: allocating 58139 entries in 228 pages
<6>[ 0.092591] ftrace: allocated 228 pages with 4 groups
<6>[ 0.093747] Dynamic Preempt: voluntary
<6>[ 0.094165] Running RCU self tests
<6>[ 0.094166] Running RCU synchronous self tests
<6>[ 0.094171] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.094171] rcu: RCU lockdep checking is enabled.
<6>[ 0.094172] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.094172] Trampoline variant of Tasks RCU enabled.
<6>[ 0.094173] Rude variant of Tasks RCU enabled.
<6>[ 0.094173] Tracing variant of Tasks RCU enabled.
<6>[ 0.094173] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
<6>[ 0.094173] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.094210] Running RCU synchronous self tests
<6>[ 0.094214] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.094217] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.094219] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.103847] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.104288] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.104611] Console: colour dummy device 80x25
<6>[ 0.104619] printk: legacy console [tty0] enabled
<4>[ 0.105778] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>[ 0.105785] ... MAX_LOCKDEP_SUBCLASSES: 8
<4>[ 0.105789] ... MAX_LOCK_DEPTH: 48
<4>[ 0.105792] ... MAX_LOCKDEP_KEYS: 8192
<4>[ 0.105796] ... CLASSHASH_SIZE: 4096
<4>[ 0.105799] ... MAX_LOCKDEP_ENTRIES: 524288
<4>[ 0.105803] ... MAX_LOCKDEP_CHAINS: 524288
<4>[ 0.105807] ... CHAINHASH_SIZE: 262144
<4>[ 0.105810] memory used by lock dependency info: 54145 kB
<4>[ 0.105815] memory used for stack traces: 4224 kB
<4>[ 0.105818] per task-struct memory footprint: 1920 bytes
<6>[ 0.105865] ACPI: Core revision 20240827
<6>[ 0.106703] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.106766] APIC: Switch to symmetric I/O mode setup
<6>[ 0.106772] DMAR: Host address width 38
<6>[ 0.106776] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.106803] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.106831] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.106854] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.106883] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.106906] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89804f0efda
<6>[ 0.106946] DMAR: SATC flags: 0x1
<6>[ 0.106955] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.106961] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.106966] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.109024] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.114181] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.114199] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=12441600)
<6>[ 0.114272] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.114278] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.114456] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.114461] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.114468] process: using mwait in idle threads
<6>[ 0.114476] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.114484] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.114489] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.114496] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.114503] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.114518] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.114524] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.114529] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.114535] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.114541] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.114548] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.114553] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.114559] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.114565] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.118194] Freeing SMP alternatives memory: 48K
<6>[ 0.118194] pid_max: default: 32768 minimum: 301
<6>[ 0.118194] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.118194] landlock: Up and running.
<6>[ 0.118194] Yama: becoming mindful.
<6>[ 0.118194] AppArmor: AppArmor initialized
<6>[ 0.118194] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.118194] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.118194] Running RCU synchronous self tests
<6>[ 0.118194] Running RCU synchronous self tests
<6>[ 0.118194] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.118194] Running RCU Tasks wait API self tests
<6>[ 0.118194] Running RCU Tasks Rude wait API self tests
<6>[ 0.118194] Running RCU Tasks Trace wait API self tests
<6>[ 0.118194] Performance Events: XSAVE Architectural LBR, no PEBS fmt6+, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.118194] core: cpu_core PMU driver:
<6>[ 0.118194] ... version: 6
<6>[ 0.118194] ... bit width: 48
<6>[ 0.118194] ... generic registers: 10
<6>[ 0.118194] ... value mask: 0000ffffffffffff
<6>[ 0.118194] ... max period: 00007fffffffffff
<6>[ 0.118194] ... fixed-purpose events: 4
<6>[ 0.118194] ... event mask: 0001000f000003ff
<6>[ 0.118194] signal: max sigframe size: 3632
<6>[ 0.118194] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.118194] rcu: Hierarchical SRCU implementation.
<6>[ 0.118194] rcu: Max phase no-delay instances is 1000.
<6>[ 0.118194] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.118194] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.118194] smp: Bringing up secondary CPUs ...
<6>[ 0.118194] smpboot: x86: Booting SMP configuration:
<6>[ 0.118194] .... node #0, CPUs: #1 #2 #3
<3>[ 0.118270] psi: inconsistent task state! task=1:swapper/0 cpu=0 psi_flags=4 clear=0 set=4
<4>[ 0.130652] #4
<6>[ 0.130867] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.138568] #5 #6 #7
<6>[ 0.013722] core: cpu_atom PMU driver:
<6>[ 0.013722] ... version: 6
<6>[ 0.013722] ... bit width: 48
<6>[ 0.013722] ... generic registers: 8
<6>[ 0.013722] ... value mask: 0000ffffffffffff
<6>[ 0.013722] ... max period: 00007fffffffffff
<6>[ 0.013722] ... fixed-purpose events: 6
<6>[ 0.013722] ... event mask: 00000077000000ff
<6>[ 0.158365] smp: Brought up 1 node, 8 CPUs
<6>[ 0.158646] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.163552] Memory: 32364664K/33160164K available (24576K kernel code, 5258K rwdata, 8860K rodata, 5544K init, 68808K bss, 774528K reserved, 0K cma-reserved)
<6>[ 0.163552] devtmpfs: initialized
<6>[ 0.163552] x86/mm: Memory block size: 128MB
<6>[ 0.182232] ACPI: PM: Registering ACPI NVS region [mem 0x6fed3000-0x6ff4ffff] (512000 bytes)
<6>[ 0.182618] Running RCU synchronous self tests
<6>[ 0.182629] Running RCU synchronous self tests
<6>[ 0.182646] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
<6>[ 0.182646] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.182646] pinctrl core: initialized pinctrl subsystem
<6>[ 0.182960] PM: RTC time: 15:35:34, date: 2024-10-10
<6>[ 0.183769] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.184690] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.184981] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.185263] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.185322] audit: initializing netlink subsys (disabled)
<5>[ 0.186272] audit: type=2000 audit(1728574534.072:1): state=initialized audit_enabled=0 res=1
<6>[ 0.186861] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.186863] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.186869] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.186874] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.186878] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.186919] EISA bus registered
<6>[ 0.186945] cpuidle: using governor ladder
<6>[ 0.186945] cpuidle: using governor menu
<6>[ 0.186945] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.187315] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.187342] PCI: Using configuration type 1 for base access
<6>[ 0.187464] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.187464] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.187464] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.187464] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.187464] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.261298] raid6: avx2x4 gen() 29444 MB/s
<6>[ 0.329478] raid6: avx2x2 gen() 31771 MB/s
<6>[ 0.397662] raid6: avx2x1 gen() 28890 MB/s
<6>[ 0.397672] raid6: using algorithm avx2x2 gen() 31771 MB/s
<6>[ 0.465851] raid6: .... xor() 24239 MB/s, rmw enabled
<6>[ 0.465861] raid6: using avx2x2 recovery algorithm
<6>[ 0.466650] fbcon: Taking over console
<6>[ 0.466872] ACPI: Added _OSI(Module Device)
<6>[ 0.466881] ACPI: Added _OSI(Processor Device)
<6>[ 0.466890] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.466899] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.876254] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.888712] ACPI: EC: EC started
<6>[ 0.888725] ACPI: EC: interrupt blocked
<6>[ 0.891304] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.891309] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.913421] Callback from call_rcu_tasks() invoked.
<6>[ 1.197695] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.197722] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.242860] ACPI: Interpreter enabled
<6>[ 1.243038] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.243050] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.250672] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.250686] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.276170] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.276241] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.345233] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.345718] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.350914] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.687879] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.711027] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.871125] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.873702] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.889179] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.904441] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.904853] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.905245] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.989734] ACPI: \: Can't tag data node
<3>[ 1.991540] ACPI: \: Can't tag data node
<3>[ 1.993333] ACPI: \: Can't tag data node
<3>[ 1.995035] ACPI: \: Can't tag data node
<3>[ 1.996829] ACPI: \: Can't tag data node
<6>[ 2.169868] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.170701] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.171485] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.172248] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.173017] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.175189] ACPI: \PIN_: New power resource
<6>[ 2.182341] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.182372] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.186361] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 2.195218] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 2.210037] PCI host bridge to bus 0000:00
<6>[ 2.210092] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.210105] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.210116] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.210128] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.210140] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.210154] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.214823] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.215677] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.215735] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.215778] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.215830] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.215885] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.218208] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.218208] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 2.220701] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.220725] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.220744] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 2.221978] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.222026] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.222040] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.222061] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.222355] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.222430] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.228755] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.228802] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.228816] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.228837] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.229082] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.229147] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.236918] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.236967] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.236981] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.237001] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.237259] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.237325] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.244353] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.244380] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 2.244412] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.244685] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.244706] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.244725] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 2.245308] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.245339] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 2.245438] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.248343] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.248376] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 2.248397] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 2.248483] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.248490] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.250389] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.250420] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 2.250441] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 2.250527] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.250533] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.252419] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.252451] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 2.252553] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.258207] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.258207] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 2.258207] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.258207] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.258207] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 2.258207] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.260707] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.260740] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 2.260763] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 2.261144] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.261211] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.263339] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.263413] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.266207] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.266207] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.268351] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.268419] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.271164] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.271214] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 2.271376] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.275010] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 2.275044] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 2.275063] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 2.275429] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.275467] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.275478] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.275489] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.275624] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.275689] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.283378] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.283482] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.283523] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.283843] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.284008] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.291516] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.293544] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.293599] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 2.293663] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 2.293795] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.295063] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.295100] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 2.295133] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.296885] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.296934] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.297302] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.297338] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.297485] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.299424] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.299639] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.299855] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.300081] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.300111] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.300143] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.300167] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.300359] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.300365] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.301158] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.314285] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.314770] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.314800] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.315577] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.315642] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.736404] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 13.876196] Low-power S0 idle used by default for system suspend
<6>[ 13.927269] ACPI: EC: interrupt unblocked
<6>[ 13.927280] ACPI: EC: event unblocked
<6>[ 13.927314] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 13.927321] ACPI: EC: GPE=0x6e
<6>[ 13.927326] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 13.927335] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 13.927799] iommu: Default domain type: Translated
<6>[ 13.927799] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 13.927799] SCSI subsystem initialized
<7>[ 13.927799] libata version 3.00 loaded.
<6>[ 13.927799] ACPI: bus type USB registered
<6>[ 13.927799] usbcore: registered new interface driver usbfs
<6>[ 13.927799] usbcore: registered new interface driver hub
<6>[ 13.927799] usbcore: registered new device driver usb
<6>[ 13.931877] pps_core: LinuxPPS API ver. 1 registered
<6>[ 13.931882] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 13.931904] PTP clock support registered
<6>[ 13.931971] EDAC MC: Ver: 3.0.0
<6>[ 13.935357] efivars: Registered efivars operations
<6>[ 13.935357] NetLabel: Initializing
<6>[ 13.935357] NetLabel: domain hash size = 128
<6>[ 13.935357] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 13.935357] NetLabel: unlabeled traffic allowed by default
<6>[ 13.935357] mctp: management component transport protocol core
<6>[ 13.935357] NET: Registered PF_MCTP protocol family
<6>[ 13.938241] PCI: Using ACPI for IRQ routing
<7>[ 13.957869] PCI: pci_cache_line_size set to 64 bytes
<6>[ 13.958153] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 13.958313] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 13.958322] e820: reserve RAM buffer [mem 0x68677000-0x6bffffff]
<7>[ 13.958325] e820: reserve RAM buffer [mem 0x69061000-0x6bffffff]
<7>[ 13.958328] e820: reserve RAM buffer [mem 0x6cb5a000-0x6fffffff]
<7>[ 13.958330] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 13.958506] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 13.958506] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 13.958506] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 13.958506] vgaarb: loaded
<6>[ 13.958506] clocksource: Switched to clocksource tsc-early
<5>[ 13.968656] VFS: Disk quotas dquot_6.6.0
<6>[ 13.968678] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 13.969442] AppArmor: AppArmor Filesystem Enabled
<6>[ 13.969596] pnp: PnP ACPI init
<6>[ 13.971236] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 13.971246] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 13.972419] system 00:02: [io 0x06a4] has been reserved
<6>[ 13.972427] system 00:02: [io 0x06a0] has been reserved
<6>[ 13.991632] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 13.991642] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 13.991652] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 13.991660] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 13.991668] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 13.991677] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 13.991686] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 13.991693] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 13.995584] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 13.997894] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 13.998036] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 14.003028] pnp: PnP ACPI: found 8 devices
<6>[ 14.034003] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 14.034595] NET: Registered PF_INET protocol family
<6>[ 14.034923] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 14.040000] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 14.040433] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 14.040816] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 14.042095] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 14.045159] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 14.046238] MPTCP token hash table entries: 32768 (order: 9, 2883584 bytes, linear)
<6>[ 14.047633] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 14.048969] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 14.050375] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 14.050488] NET: Registered PF_XDP protocol family
<6>[ 14.050517] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 14.050545] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 14.050569] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 14.050660] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 14.050678] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 14.050693] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 14.050711] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 14.050832] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 14.050919] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 14.051006] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 14.051092] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 14.051166] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 14.051185] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 14.051207] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 14.051234] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 14.051261] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 14.051275] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 14.051296] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 14.051315] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 14.051348] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 14.051362] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 14.051383] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 14.051403] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 14.051440] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 14.051454] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 14.051474] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 14.051501] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 14.051548] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 14.051611] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 14.051627] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 14.051641] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 14.051656] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 14.051671] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 14.051687] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 14.051700] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 14.051713] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 14.051730] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 14.051743] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 14.051757] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 14.051773] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 14.051787] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 14.051801] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 14.051819] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 14.051832] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 14.051847] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 14.054772] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 14.058170] PCI: CLS 0 bytes, default 64
<6>[ 14.058319] DMAR: Intel-IOMMU force enabled due to platform opt in
<6>[ 14.058428] DMAR: No RMRR found
<6>[ 14.058458] DMAR: No ATSR found
<6>[ 14.058467] DMAR: IOMMU feature nwfs inconsistent
<6>[ 14.058471] DMAR: IOMMU feature dit inconsistent
<6>[ 14.058488] DMAR: IOMMU feature nest inconsistent
<6>[ 14.058500] DMAR: IOMMU feature sc_support inconsistent
<6>[ 14.058511] DMAR: IOMMU feature dev_iotlb_support inconsistent
<6>[ 14.058524] DMAR: dmar1: Using Queued invalidation
<6>[ 14.058610] DMAR: dmar0: Using Queued invalidation
<6>[ 14.058627] DMAR: dmar2: Using Queued invalidation
<6>[ 14.060535] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 14.060700] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 14.060839] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 14.060958] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 14.062600] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 14.063832] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 14.063978] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 14.064107] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 14.064232] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 14.064436] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 14.064532] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 14.064627] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 14.064777] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 14.064932] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 14.065112] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 14.065211] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 14.065426] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 14.065522] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 14.065619] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 14.065715] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 14.065892] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 14.065993] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 14.066128] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 14.066290] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 14.066538] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 14.066646] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 14.066751] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 14.066864] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 14.066976] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 14.067106] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 14.067269] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 14.068396] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 14.068411] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 14.068423] software IO TLB: mapped [mem 0x0000000063b5b000-0x0000000067b5b000] (64MB)
<6>[ 14.075312] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 14.075390] clocksource: Switched to clocksource tsc
<6>[ 14.075586] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 14.084678] Initialise system trusted keyrings
<5>[ 14.084796] Key type blacklist registered
<6>[ 14.085251] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 14.093295] zbud: loaded
<6>[ 14.095194] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 14.096299] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 14.096311] ntfs3: Read-only LZX/Xpress compression included
<6>[ 14.096381] fuse: init (API version 7.41)
<5>[ 14.097315] integrity: Platform Keyring initialized
<5>[ 14.097356] integrity: Machine keyring initialized
<6>[ 14.108431] xor: automatically using best checksumming function avx
<5>[ 14.108446] Key type asymmetric registered
<5>[ 14.108463] Asymmetric key parser 'x509' registered
<6>[ 14.108626] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 14.109161] io scheduler mq-deadline registered
<6>[ 14.110799] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 14.113088] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 14.113327] pcieport 0000:00:07.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 14.116740] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 14.116984] pcieport 0000:00:07.1: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 14.119811] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 14.120021] pcieport 0000:00:07.2: pciehp: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 14.122654] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 14.124531] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 14.125229] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 14.129790] Monitor-Mwait will be used to enter C-1 state
<7>[ 14.129869] Monitor-Mwait will be used to enter C-2 state
<7>[ 14.130321] Monitor-Mwait will be used to enter C-3 state
<6>[ 14.138540] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 14.138817] ACPI: button: Lid Switch [LID0]
<6>[ 14.139198] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 14.139458] ACPI: button: Sleep Button [SLPB]
<6>[ 14.139769] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 14.140529] ACPI: button: Power Button [PWRB]
<6>[ 14.497170] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 14.497258] ACPI: thermal: Thermal Zone [TZ00] (55 C)
<6>[ 14.500734] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 14.501426] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 14.503549] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 14.525841] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 14.563826] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 14.567244] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 14.594682] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 14.599841] hpet_acpi_add: no address or irqs in _CRS
<6>[ 14.600097] Linux agpgart interface v0.103
<6>[ 14.634863] loop: module loaded
<6>[ 14.645961] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 14.664812] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 14.690211] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 14.709844] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<6>[ 14.729325] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 14.730725] nvme nvme0: pci function 0000:80:00.0
<6>[ 14.732559] tun: Universal TUN/TAP device driver, 1.6
<6>[ 14.733014] PPP generic driver version 2.4.2
<6>[ 14.734169] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.734354] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 14.735685] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.738426] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.738475] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 14.738516] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.739376] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 14.739420] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.739438] usb usb1: Product: xHCI Host Controller
<6>[ 14.739450] usb usb1: Manufacturer: Linux 6.12.0-rc2-xe xhci-hcd
<6>[ 14.739464] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 14.741028] hub 1-0:1.0: USB hub found
<6>[ 14.741145] hub 1-0:1.0: 1 port detected
<6>[ 14.746637] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 14.746657] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.746669] usb usb2: Product: xHCI Host Controller
<6>[ 14.746678] usb usb2: Manufacturer: Linux 6.12.0-rc2-xe xhci-hcd
<6>[ 14.746688] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 14.747368] hub 2-0:1.0: USB hub found
<6>[ 14.747414] hub 2-0:1.0: 3 ports detected
<6>[ 14.769648] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 14.772595] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.772633] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 14.773935] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.776024] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.776052] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 14.776069] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.776334] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 14.776349] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.776359] usb usb3: Product: xHCI Host Controller
<6>[ 14.776366] usb usb3: Manufacturer: Linux 6.12.0-rc2-xe xhci-hcd
<6>[ 14.776375] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 14.777066] hub 3-0:1.0: USB hub found
<6>[ 14.777120] hub 3-0:1.0: 8 ports detected
<6>[ 14.783763] nvme0n1: p1 p2
<6>[ 14.823987] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 14.824016] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.824034] usb usb4: Product: xHCI Host Controller
<6>[ 14.824046] usb usb4: Manufacturer: Linux 6.12.0-rc2-xe xhci-hcd
<6>[ 14.824060] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 14.825584] hub 4-0:1.0: USB hub found
<6>[ 14.825663] hub 4-0:1.0: 2 ports detected
<6>[ 14.844009] usbcore: registered new interface driver usb-storage
<6>[ 14.844743] usbcore: registered new interface driver usbserial_generic
<6>[ 14.845223] usbserial: USB Serial support registered for generic
<6>[ 14.845258] usbcore: registered new interface driver ftdi_sio
<6>[ 14.845282] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 14.845316] usbcore: registered new interface driver pl2303
<6>[ 14.845338] usbserial: USB Serial support registered for pl2303
<6>[ 14.845441] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 14.845446] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 15.553829] i8042: Can't read CTR while initializing i8042
<3>[ 15.553836] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 15.555412] mousedev: PS/2 mouse device common for all mice
<6>[ 15.556259] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 15.557656] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 15.557926] rtc_cmos rtc_cmos: setting system clock to 2024-10-10T15:35:49 UTC (1728574549)
<6>[ 15.558030] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 15.558059] i2c_dev: i2c /dev entries driver
<6>[ 15.564429] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 15.564438] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 15.564444] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 15.564466] device-mapper: uevent: version 1.0.3
<6>[ 15.564673] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 15.564747] platform eisa.0: Probing EISA bus 0
<4>[ 15.564753] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 15.564762] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 15.564770] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 15.564778] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 15.564787] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 15.564793] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 15.564800] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 15.564808] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 15.564815] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 15.564820] platform eisa.0: EISA: Detected 0 cards
<6>[ 15.564826] intel_pstate: Intel P-state driver initializing
<6>[ 15.567355] Hybrid CPU capacity scaling enabled
<6>[ 15.568301] intel_pstate: HWP enabled
<6>[ 15.568306] sdhci: Secure Digital Host Controller Interface driver
<6>[ 15.568313] sdhci: Copyright(c) Pierre Ossman
<6>[ 15.571688] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 15.571895] efifb: probing for efifb
<6>[ 15.571939] efifb: framebuffer at 0x2000800000, using 20252k, total 20250k
<6>[ 15.571947] efifb: mode is 2880x1800x32, linelength=11520, pages=1
<6>[ 15.571953] efifb: scrolling: redraw
<6>[ 15.571957] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
<6>[ 15.572590] Console: switching to colour frame buffer device 180x56
<6>[ 15.576870] fb0: EFI VGA frame buffer device
<6>[ 15.577250] drop_monitor: Initializing network drop monitor service
<6>[ 15.577522] NET: Registered PF_INET6 protocol family
<6>[ 15.580099] Segment Routing with IPv6
<6>[ 15.580229] In-situ OAM (IOAM) with IPv6
<6>[ 15.580288] NET: Registered PF_PACKET protocol family
<5>[ 15.580460] Key type dns_resolver registered
<4>[ 15.583592] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 15.584177] microcode: Current revision: 0x00000115
<6>[ 15.585094] IPI shorthand broadcast: enabled
<6>[ 15.595046] sched_clock: Marking stable (15584002822, 9722351)->(15640728576, -47003403)
<6>[ 15.595789] registered taskstats version 1
<5>[ 15.597370] Loading compiled-in X.509 certificates
<6>[ 15.614633] Demotion targets for Node 0: null
<6>[ 15.615001] kmemleak: Kernel memory leak detector initialized (mem pool available: 15711)
<6>[ 15.615015] kmemleak: Automatic memory scanning thread started
<5>[ 15.615594] Key type .fscrypt registered
<5>[ 15.615699] Key type fscrypt-provisioning registered
<6>[ 15.618194] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 15.620282] Key type encrypted registered
<6>[ 15.620386] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 15.620585] ima: No TPM chip found, activating TPM-bypass!
<5>[ 15.620704] Loading compiled-in module X.509 certificates
<5>[ 15.621395] Loaded X.509 cert 'Build time autogenerated kernel key: 28c91a5fdc1cd14ab2bcb6d647d5aada18172c61'
<6>[ 15.621522] ima: Allocated hash algorithm: sha1
<6>[ 15.621575] ima: No architecture policies found
<6>[ 15.621677] evm: Initialising EVM extended attributes:
<6>[ 15.621706] evm: security.selinux
<6>[ 15.621746] evm: security.SMACK64
<6>[ 15.621765] evm: security.SMACK64EXEC
<6>[ 15.621785] evm: security.SMACK64TRANSMUTE
<6>[ 15.622822] evm: security.SMACK64MMAP
<6>[ 15.623844] evm: security.apparmor
<6>[ 15.624854] evm: security.ima
<6>[ 15.625853] evm: security.capability
<6>[ 15.626855] evm: HMAC attrs: 0x1
<6>[ 15.629781] PM: Magic number: 12:396:588
<6>[ 15.631090] printk: legacy console [netcon0] enabled
<6>[ 15.632209] netconsole: network logging started
<6>[ 15.634224] RAS: Correctable Errors collector initialized.
<6>[ 15.635485] clk: Disabling unused clocks
<6>[ 15.636890] PM: genpd: Disabling unused power domains
<6>[ 15.638221] md: Waiting for all devices to be available before autodetect
<6>[ 15.639401] md: If you don't use raid, use raid=noautodetect
<6>[ 15.640510] md: Autodetecting RAID arrays.
<6>[ 15.641623] md: autorun ...
<6>[ 15.642737] md: ... autorun DONE.
<6>[ 15.687684] EXT4-fs (nvme0n1p2): mounted filesystem 7dfac1f5-10ea-4066-a63e-e14654e0601e ro with ordered data mode. Quota mode: none.
<6>[ 15.688946] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 15.691430] devtmpfs: mounted
<6>[ 15.704108] Freeing unused decrypted memory: 2036K
<6>[ 15.706132] Freeing unused kernel image (initmem) memory: 5544K
<6>[ 15.707340] Write protecting the kernel read-only data: 34816k
<6>[ 15.709220] Freeing unused kernel image (rodata/data gap) memory: 1380K
<6>[ 15.714256] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 15.715475] Run /sbin/init as init process
<7>[ 15.716597] with arguments:
<7>[ 15.716598] /sbin/init
<7>[ 15.716599] with environment:
<7>[ 15.716600] HOME=/
<7>[ 15.716601] TERM=linux
<7>[ 15.716601] BOOT_IMAGE=/boot/drm_intel
<7>[ 15.758572] systemd[1]: Inserted module 'autofs4'
<7>[ 15.780472] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 15.784302] systemd[1]: Detected architecture x86-64.
<7>[ 15.791402] systemd[1]: Hostname set to <shard-lnl-7>.
<7>[ 15.947222] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 15.951246] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 16.038735] systemd[1]: Queued start job for default target graphical.target.
<7>[ 16.067925] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 16.074279] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 16.079999] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 16.084085] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 16.089006] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 16.093308] systemd[1]: Expecting device dev-disk-by\x2duuid-BB9D\x2d0E2E.device - /dev/disk/by-uuid/BB9D-0E2E...
<7>[ 16.097435] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 16.101673] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 16.105534] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 16.109290] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 16.113167] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 16.117575] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 16.122612] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 16.126998] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 16.131462] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 16.135874] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 16.140357] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 16.145082] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 16.149728] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 16.154402] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 16.159117] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.161773] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 16.166602] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 16.202642] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 16.211175] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 16.218192] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 16.225331] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 16.234884] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 16.241613] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 16.248926] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 16.256420] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 16.263712] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 16.269539] systemd-journald[195]: Collecting audit messages is disabled.
<7>[ 16.276425] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 16.283906] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 16.291629] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 16.298955] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 16.306218] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 16.313015] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 16.317586] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 16.319093] pstore: Using crash dump compression: deflate
<6>[ 16.324606] ACPI: bus type drm_connector registered
<6>[ 16.327184] pstore: Registered efi_pstore as persistent store backend
<7>[ 16.329712] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 16.337301] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 16.341758] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.343973] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.349629] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 16.358324] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 16.569220] EXT4-fs (nvme0n1p2): re-mounted 7dfac1f5-10ea-4066-a63e-e14654e0601e r/w. Quota mode: none.
<6>[ 16.632077] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:320602112k SS
<7>[ 16.651930] systemd-journald[195]: Received client request to flush runtime journal.
<7>[ 16.667720] systemd-journald[195]: /var/log/journal/d99f231fc73949389b52e126c183b290/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 16.667737] systemd-journald[195]: Rotating system journal.
<6>[ 17.284143] mc: Linux media interface: v0.10
<6>[ 17.314015] videodev: Linux video capture interface: v2.00
<4>[ 17.329475] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.329497] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.346934] Consider using thermal netlink events interface
<6>[ 17.349096] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 17.357347] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 17.365039] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 17.378060] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 17.385646] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.385711] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.447766] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.447796] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.488666] pci 0000:00:05.0: Setting to D3hot
<4>[ 17.500400] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.500430] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.500727] pci 0000:00:0b.0: Setting to D3hot
<4>[ 17.512814] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 17.513024] intel_pmc_core INT33A1:00: initialized
<5>[ 17.605754] audit: type=1400 audit(1728574551.539:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=367 comm="apparmor_parser"
<5>[ 17.605770] audit: type=1400 audit(1728574551.539:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=364 comm="apparmor_parser"
<5>[ 17.605776] audit: type=1400 audit(1728574551.539:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=369 comm="apparmor_parser"
<5>[ 17.605782] audit: type=1400 audit(1728574551.539:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=366 comm="apparmor_parser"
<5>[ 17.605813] audit: type=1400 audit(1728574551.543:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=365 comm="apparmor_parser"
<5>[ 17.606926] audit: type=1400 audit(1728574551.543:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=363 comm="apparmor_parser"
<5>[ 17.608951] audit: type=1400 audit(1728574551.543:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=370 comm="apparmor_parser"
<5>[ 17.611069] audit: type=1400 audit(1728574551.547:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=371 comm="apparmor_parser"
<5>[ 17.613607] audit: type=1400 audit(1728574551.547:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=372 comm="apparmor_parser"
<5>[ 17.617917] audit: type=1400 audit(1728574551.555:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=373 comm="apparmor_parser"
<4>[ 17.669151] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.669174] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.718745] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.718766] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.896339] ACPI: bus type thunderbolt registered
<6>[ 17.926710] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 17.942611] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 17.942615] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 17.942726] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 17.946273] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 17.948287] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 17.968918] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 17.982680] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 17.983427] intel_rapl_common: Found RAPL domain package
<6>[ 17.983433] intel_rapl_common: Found RAPL domain dram
<6>[ 17.989336] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 18.004709] idma64 idma64.3: Found Intel integrated DMA 64-bit
<4>[ 18.013752] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.013780] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.055068] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a5:0e:fc, XID 541, IRQ 175
<6>[ 18.055074] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<4>[ 18.116906] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.116928] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.159905] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 18.159911] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 18.159914] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 18.159916] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 18.159917] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 18.172376] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 18.175648] cryptd: max_cpu_qlen set to 1000
<6>[ 18.176069] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<4>[ 18.177743] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.177768] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.245155] AES CTR mode by8 optimization enabled
<6>[ 18.292709] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:30:95
<6>[ 18.292715] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 18.292830] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<4>[ 18.296376] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.296410] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.410165] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.410195] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.651160] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 18.677836] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<4>[ 18.711413] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.711433] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.773284] block nvme0n1: No UUID available providing old NGUID
<4>[ 18.818351] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.818375] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.818939] intel_rapl_common: Found RAPL domain package
<6>[ 18.818944] intel_rapl_common: Found RAPL domain core
<6>[ 18.818947] intel_rapl_common: Found RAPL domain dram
<6>[ 18.819269] intel_rapl_common: Found RAPL domain psys
<6>[ 18.894574] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 18.912762] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.912790] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.978196] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.978223] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.986448] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 19.038550] evm: overlay not supported
<5>[ 19.054153] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 19.054172] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 19.146760] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<4>[ 19.158568] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.158592] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 19.334223] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 19.680515] hid: raw HID events driver (C) Jiri Kosina
<6>[ 19.687554] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 19.700171] loop0: detected capacity change from 0 to 8
<6>[ 19.732647] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.734704] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.736312] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.737116] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.739318] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.743286] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.752737] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.759253] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.763831] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.767357] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.770725] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.773168] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<4>[ 19.780113] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.780138] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 20.856248] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 20.856276] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 23.731892] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<6>[ 26.885141] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 26.885166] typec port0: bound usb2-port1 (ops connector_ops)
<4>[ 30.320615] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 30.320632] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 30.321289] platform INT3472:01: deferred probe pending: int3472-discrete: Failed to get GPIO
<7>[ 36.483814] systemd-journald[195]: /var/log/journal/d99f231fc73949389b52e126c183b290/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<6>[ 39.952617] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 39.952639] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 103.266493] Console: switching to colour dummy device 80x25
<7>[ 103.266536] [IGT] xe_module_load: executing
<7>[ 103.271019] [IGT] xe_module_load: starting subtest load
<6>[ 103.423391] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 103.424749] xe 0000:00:02.0: [drm] Found LUNARLAKE (device ID 64a0) display version 20.00 stepping B0
<7>[ 103.424757] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 103.424835] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 103.424902] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 103.439425] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.29.2
<7>[ 103.442738] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x0024e3d7
<7>[ 103.442847] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 103.442944] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 103.443031] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7>[ 103.443109] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006c2
<7>[ 103.443184] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 103.443262] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 103.443339] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 103.443413] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 103.443484] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 103.443557] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 103.443627] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 103.443695] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 103.443762] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 103.443829] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 103.443962] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 103.445183] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 103.450648] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 103.453374] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 8ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 103.454486] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 103.454661] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 103.454871] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 103.455046] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 103.455194] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 103.455332] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 103.455465] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 103.456419] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.29.2
<7>[ 103.460712] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c563d7
<7>[ 103.460887] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 103.461031] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 103.461222] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000003
<7>[ 103.461362] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ad2
<7>[ 103.461513] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 103.461643] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 103.461770] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 103.461896] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 103.462018] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 103.462142] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 103.462285] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 103.462416] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 103.462534] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 103.464848] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 103.468156] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1161
<6>[ 103.469339] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 103.469474] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 103.469647] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 103.471274] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 103.471431] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 103.489215] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 17ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 103.489639] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 103.489802] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 103.489964] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 103.490113] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 103.490258] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 103.490402] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 103.490545] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 103.490728] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 103.491005] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 103.491214] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 103.491414] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 103.491609] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 103.491799] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 103.492032] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 103.492239] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 103.492480] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 103.492721] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 103.492965] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 103.493232] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 103.493478] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 103.493706] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 103.493922] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 103.494129] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 103.494330] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.494560] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.494751] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 103.494943] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.495168] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.495359] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.495567] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 103.495742] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.495918] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.496090] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.496262] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 103.496430] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.496604] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.496820] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.497010] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 103.497237] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.497406] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.497566] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.497716] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 103.497864] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.498007] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.498146] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.498292] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 103.498966] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 103.499130] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 103.499285] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 103.499435] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 103.499572] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 103.499704] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 103.499854] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 103.499999] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 103.500117] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 103.500248] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 103.500391] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 103.500506] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 103.500614] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 103.500723] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 103.500830] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 103.500937] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 103.501044] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 103.501161] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 103.501269] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 103.501378] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 103.501478] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 103.501589] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 103.501701] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 103.501796] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 103.501887] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 103.501973] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 103.502061] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 103.502158] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 103.502310] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 103.502515] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 103.502681] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 103.502870] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 103.503053] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 103.503202] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 103.503307] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 103.503409] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 103.503543] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 103.503646] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
<7>[ 103.503665] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 103.503777] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 103.503871] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 103.503964] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 103.504394] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 103.504562] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 103.505065] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 103.506739] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 103.506850] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 103.506936] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 103.507003] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 103.507070] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 103.507134] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 103.507197] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 103.507260] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 103.510468] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 103.510595] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 103.510697] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 103.510802] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 103.510903] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 103.510997] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x578856c4 (EVT_HTP)
<7>[ 103.511084] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 103.511162] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 103.511239] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 103.511354] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 103.511491] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 103.511628] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 103.511768] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 103.511901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 103.512035] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 103.512175] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 103.512312] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 103.512448] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 103.512582] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 103.512712] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 103.512838] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 103.512961] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 103.513079] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 103.513226] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 103.513830] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 103.517817] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 103.517995] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 103.518139] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 103.518364] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 103.518567] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 103.518811] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 103.518957] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 103.519091] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 103.519228] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 103.519351] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 103.519467] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 103.519581] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 103.519692] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 103.519801] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 103.519948] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 103.520195] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 103.520317] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 103.520426] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 103.520530] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 103.520631] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 103.520884] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 103.521221] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 103.522701] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 103.523017] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<6>[ 103.524234] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.21)
<7>[ 103.525410] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 103.526047] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 103.526914] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85
<7>[ 103.527903] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 103.528442] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 103.530611] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 103.540867] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 103.540909] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.540911] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.540913] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 103.540933] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.540935] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 103.540953] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.540954] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 103.540971] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.541014] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.541016] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.541017] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.541027] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 103.541589] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 103.542129] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 103.542232] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 103.542374] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 103.542500] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 103.542665] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 103.542761] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 103.542849] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 103.542933] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 103.543013] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 103.543122] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 103.543343] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 103.543648] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 103.543787] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 103.544211] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 103.544339] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 103.544458] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 103.544731] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 103.544855] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 103.544980] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 103.545833] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 103.545977] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 103.546106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 103.546192] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 103.546273] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 103.546380] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 103.546520] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 103.546661] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 103.546801] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 103.546938] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 103.547076] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 103.547213] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 103.547350] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 103.547487] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 103.547625] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 103.547770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 103.547913] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 103.548055] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 103.548201] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 103.548318] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 103.548393] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 103.549215] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 103.549342] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 103.549449] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 103.549546] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 103.549630] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 103.549708] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 103.549784] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 103.549862] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 103.549942] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 103.550018] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 103.550092] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 103.550165] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 103.550240] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 103.550317] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 103.550390] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 103.550461] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 103.550532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 103.550671] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 103.550757] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 103.550833] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 103.550908] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 103.551168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 103.551248] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 103.551321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 103.551392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 103.551463] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 103.551534] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 103.551605] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 103.551716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 103.551795] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 103.551869] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 103.551941] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 103.552012] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 103.552083] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 103.552153] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 103.552261] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 103.552343] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 103.552418] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 103.552491] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 103.552563] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 103.552634] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 103.552705] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 103.552953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 103.553063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 103.553175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 103.553275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 103.553371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 103.553461] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 103.553549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 103.553636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 103.553723] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 103.553809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 103.553895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 103.553979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 103.554062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 103.554146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 103.554229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, pipeline full: 0, guardband: 105 flipline: 1906, vmin vblank: 1802, vmax vblank: 1801
<7>[ 103.554314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 103.554399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 103.554483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 103.554568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 103.554652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 103.554736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 103.554819] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 103.554901] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 103.554984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 103.555067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 103.555151] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 103.555234] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 103.555317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 103.555399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 103.555484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.555567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.555650] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.555734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 103.555816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 103.555897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.555979] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.556061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.556143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 103.556226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 103.556309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 103.556542] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 103.556637] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 103.556720] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 103.557024] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 103.557105] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 103.557779] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 103.593341] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 103.796656] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 103.796661] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 103.796662] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 103.797725] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 103.797839] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 103.797932] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 103.798010] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 103.798081] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 103.798148] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 103.798211] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 103.798276] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 103.798336] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 103.798394] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 103.798453] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 103.798511] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 103.798567] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 103.798624] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 103.798678] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 103.798732] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 103.798788] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 103.798846] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 103.798902] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 103.798957] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 103.799010] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 103.799061] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 103.799112] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 103.799163] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 103.799213] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 103.799262] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 103.799318] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 103.799374] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 103.799430] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 103.799487] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 103.799541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 103.799595] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 103.799650] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 103.799711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 103.799771] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 103.799827] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting rcs0 registers
<7>[ 103.799879] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 103.799930] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 103.799979] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 103.800441] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 103.800498] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 103.800551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 103.800728] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 103.800774] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 103.800819] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 103.801028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 103.801071] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7>[ 103.801116] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 103.801175] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting ccs0 registers
<7>[ 103.801229] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 103.801281] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 103.801342] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 103.801858] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x0024e3d7
<7>[ 103.801925] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 103.801985] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000004
<7>[ 103.802044] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7>[ 103.802101] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006c2
<7>[ 103.802156] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 103.802213] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 103.802269] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 103.802322] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 103.802376] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 103.802426] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 103.802476] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 103.802525] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 103.802573] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 103.802640] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 103.802902] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 103.804500] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 103.850422] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 103.851235] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 103.851311] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 103.856078] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 103.856167] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x800001EC [0x76/01]
<7>[ 103.856237] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 103.858993] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 103.859312] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 103.859973] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 103.860036] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 103.860098] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 103.860154] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 103.860214] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 103.860268] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 103.860321] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 103.860373] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 103.860427] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 103.863148] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 103.863209] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 103.863261] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 103.864520] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 103.867950] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 103.867955] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 103.867956] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 103.867957] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 103.867958] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 103.867959] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 103.867960] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 103.867960] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 103.867961] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 103.867962] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 103.868570] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 103.868735] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 103.868843] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 103.868950] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 103.869052] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 103.869166] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 103.869263] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 103.869363] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 103.869460] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 103.869555] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 103.869650] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 103.869746] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 103.869842] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 103.869932] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 103.870021] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 103.870108] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 103.870191] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 103.870272] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 103.870353] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 103.870434] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 103.870513] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 103.870597] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 103.870678] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 103.870761] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 103.870837] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 103.870912] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 103.871008] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 103.872113] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 103.872241] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 103.872746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 103.872889] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 103.873550] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c563d7
<7>[ 103.873669] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 103.873782] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000004
<7>[ 103.873891] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000003
<7>[ 103.873998] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ad2
<7>[ 103.874101] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 103.874203] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 103.874303] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 103.874399] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 103.874496] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 103.874586] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 103.874677] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 103.874764] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 103.874847] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 103.874956] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 103.875095] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 103.900627] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 103.901783] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 103.901886] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 103.921187] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 103.921640] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 103.922402] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 103.923756] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 103.925172] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 103.965711] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 103.967321] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 103.967590] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 103.967868] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 103.968123] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 103.968329] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 103.968579] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 103.968821] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 103.969057] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 103.969325] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 103.969822] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 103.970118] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 103.970329] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 103.985897] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 103.990407] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 103.995457] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 103.996436] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 103.999390] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 103.999574] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 104.000270] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 104.001276] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 104.001363] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 104.001996] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 104.002920] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 104.002988] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 104.003495] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 104.004081] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 104.004133] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 104.004161] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 104.012158] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 104.014823] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 104.015951] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 104.016070] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 104.017422] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 104.017520] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 104.017612] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 104.017699] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 104.017897] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<7>[ 104.018108] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 104.018132] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 104.018830] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 104.019333] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 104.019457] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 104.019567] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 104.019762] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 104.019788] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 104.019790] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.019791] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 104.019814] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.019815] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 104.019837] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.019838] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 104.019859] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.019883] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 104.019983] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 104.020632] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 104.020732] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 104.021480] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 104.021729] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 104.021731] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 104.021733] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.021766] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 104.021779] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 104.021791] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 104.021802] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 104.021970] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 104.022093] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 104.022105] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 104.022114] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 104.022122] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 104.022242] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 104.022334] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 104.022342] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 104.022349] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 104.022356] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 104.022466] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 104.022573] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 104.022583] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 104.022591] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 104.022635] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 104.022653] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 104.022671] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 104.022767] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 104.022798] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 104.022815] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 104.022832] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 104.022847] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 16384x16384 config
<7>[ 104.022869] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 104.023111] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 104.023432] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
<7>[ 104.023713] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 104.023856] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 104.024013] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 104.024501] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 104.024621] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 104.024730] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 104.024938] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 104.024969] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 104.024970] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.024971] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 104.024995] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.024997] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 104.025018] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.025020] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 104.025040] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 104.025060] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 104.025169] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 104.025830] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 104.025927] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 104.026843] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 104.026982] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 104.027105] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 104.030699] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d72000
<6>[ 104.031801] fbcon: xedrmfb (fb0) is primary device
<7>[ 104.032858] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 104.032996] xe 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 104.033108] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 104.033351] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 104.033478] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 104.033599] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 104.033705] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 104.033809] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 104.033912] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 104.034012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 104.034112] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 104.034216] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 104.034318] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 104.034420] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 104.034522] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 104.034624] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 104.034727] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 104.034830] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 104.034932] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 104.035033] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 104.035141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 104.035252] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 104.035360] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 104.035462] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 104.035557] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 104.035654] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 104.035745] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 104.035836] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 104.035924] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 104.036012] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 104.036097] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 104.036195] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 104.036293] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 104.036438] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 104.036549] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 104.036660] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 104.036757] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 104.036846] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 104.036931] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 104.037013] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037093] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037218] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037297] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 104.037373] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037446] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037518] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037575] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 104.037628] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037682] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037734] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037788] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 104.037841] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037893] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037943] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.037994] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 104.038046] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.038114] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.038185] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 104.038258] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 104.038594] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 104.038699] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 104.038801] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 104.038899] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 104.038995] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 104.039111] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 104.039239] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 104.039338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 104.039435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 104.039530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 104.039623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 104.039716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 104.039808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 104.039902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 104.039997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 104.040089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 104.040179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 104.040266] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 104.040340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 104.040411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 104.040480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 104.040547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 104.040614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 104.040678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 104.040742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 104.040804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 104.040867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1905, vmax: 2859, pipeline full: 0, guardband: 106 flipline: 1906, vmin vblank: 1800, vmax vblank: 2753
<7>[ 104.040926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 104.040984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 104.041042] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 104.041107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 104.041283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 104.041377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 104.041457] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 104.041524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 104.041590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 104.041648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 104.041706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 104.041762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 104.041818] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 104.041874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 104.041933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 104.042003] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 104.042072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 104.042143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 104.042215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 104.042275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 104.042332] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 104.042387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 104.042441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 104.042502] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:226] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 104.042567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 104.042626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 104.042686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 104.042742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 104.042798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 104.042853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 104.042917] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<4>[ 104.044845] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 104.044880] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 104.055186] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 104.069231] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 104.069398] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 104.092162] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 104.261284] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 104.262731] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 104.273782] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 104.273968] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 104.274103] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 104.274357] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 104.274410] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 104.326688] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 104.326949] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 104.357907] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 104.358325] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 104.358376] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 104.359681] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 104.359676] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 104.359933] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 104.360177] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 104.360380] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 104.360573] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 104.360761] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 104.360944] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 104.361193] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 104.361380] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 104.361567] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 104.361775] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 104.361963] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 104.362144] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 104.362318] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 104.362519] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 104.364119] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 104.364387] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle
<7>[ 104.364943] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 104.365176] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 104.365389] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 104.365602] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 104.514350] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 104.977532] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 104.977863] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 104.978089] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 104.978324] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 105.014797] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 105.015122] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 105.015393] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 105.015669] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 105.042104] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 105.042091] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 105.042228] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 105.307720] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 105.310569] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 105.310918] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 105.313178] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 105.314473] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 105.315714] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 105.317011] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 105.318235] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 105.319723] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 105.320095] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 105.322128] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 105.322450] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 105.323203] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 105.323711] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 105.324043] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 105.324463] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 105.326563] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 105.326585] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 105.326893] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 105.340574] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 105.342980] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 105.343348] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 105.344708] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 105.347186] Console: switching to colour frame buffer device 180x56
<6>[ 105.363435] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 105.397933] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 105.398186] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 105.398239] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<7>[ 105.398237] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 105.398489] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 105.398718] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 105.398934] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 105.398933] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 105.398994] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 105.399139] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 105.399334] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 105.399527] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 105.399714] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 105.399899] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 105.400080] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 105.400257] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 105.400421] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 105.400584] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 105.400747] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 105.400910] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 105.401000] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 105.401090] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 105.401325] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 105.401516] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 105.401700] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 105.401882] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 105.402099] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 105.402821] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 105.402944] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 105.403072] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 105.403171] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 105.403378] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 105.403404] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 105.403713] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 105.403916] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 105.403992] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.403996] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.404000] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 105.404059] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.404063] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 105.404116] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.404120] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<7>[ 105.404044] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<5>[ 105.404169] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.404216] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 105.404331] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 105.404455] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 105.405362] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 105.405604] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 105.406341] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.406346] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.406350] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.406430] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 105.406463] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 105.406486] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 105.406507] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 105.406786] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 105.407037] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 105.407262] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 105.407554] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 105.407682] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 105.407818] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 105.407843] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 105.407864] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 105.408144] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 105.408388] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 105.408411] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 105.408431] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 105.408714] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 105.408964] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 105.408985] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 105.409031] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 105.409072] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 105.409132] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 105.409415] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 105.409510] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 105.409563] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 105.409607] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 105.409646] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 2880x1800 config
<7>[ 105.409739] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 105.413590] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 105.413841] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<6>[ 105.425079] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<7>[ 105.425837] xe 0000:00:02.0: [drm:drm_client_dev_hotplug [drm]] intel-fbdev: ret=0
<6>[ 105.440750] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [xe])
<4>[ 105.441931] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 105.441951] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 105.444938] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 105.445202] xe 0000:00:02.0: [drm:i915_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 105.457635] xe 0000:00:02.0: [drm:drm_client_dev_restore [drm]] intel-fbdev: ret=0
<7>[ 105.457781] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 105.457838] [IGT] xe_module_load: exiting, ret=0
<4>[ 105.461651] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 105.461669] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 105.464389] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 105.464515] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 105.487356] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 105.487446] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 105.487511] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 105.487574] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 105.487633] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 105.487691] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 105.487748] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 105.487805] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 105.487860] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 105.487914] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 105.487968] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 105.488021] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 105.488074] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 105.488127] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 105.488179] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 105.488231] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 105.488282] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 105.488334] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 105.488385] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 105.488436] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 105.488487] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 105.488538] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 105.488590] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 105.488642] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 105.488693] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 105.488744] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 105.488794] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 105.488843] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 105.488894] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 105.488943] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 105.488993] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 105.489042] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 105.490262] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 105.490320] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 105.490374] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 105.490423] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<6>[ 105.501977] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 105.503090] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 105.503781] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 105.505307] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 105.513587] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 105.513724] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 105.513829] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<4>[ 105.515876] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 105.515897] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 106.417393] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 106.417524] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 106.417582] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 106.622135] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 108.628399] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 108.628976] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067