<5>[ 0.000000] Linux version 6.12.0-rc2-xe (builder@lgci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Wed Oct 9 20:58:30 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cb59fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cb5a000-0x000000006fed2fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fed3000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001043fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cc32000 MEMATTR=0x68eb8198 ESRT=0x68677198 MOKvar=0x6cd66000
<6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D89.2409021714 09/02/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000007] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000012] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000015] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000016] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000329] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000330] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004158] esrt: Reserving ESRT space from 0x0000000068677198 to 0x00000000686772e8.
<7>[ 0.004165] e820: update [mem 0x68677000-0x68677fff] usable ==> reserved
<6>[ 0.004184] Using GB pages for direct mapping
<6>[ 0.004833] printk: log_buf_len: 1048576 bytes
<6>[ 0.004834] printk: early log buf free: 258968(98%)
<6>[ 0.004834] Secure boot disabled
<6>[ 0.004836] ACPI: Early table checksum verification disabled
<6>[ 0.004839] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.004841] ACPI: XSDT 0x000000006FF7D228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004845] ACPI: FACP 0x000000006FFAC000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.004847] ACPI: DSDT 0x000000006FFB8000 024FCF (v02 INTEL LNL 00000002 01000013)
<6>[ 0.004849] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.004850] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.004852] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.004853] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.004854] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.004855] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.004857] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.004858] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.004859] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.004860] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.004862] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.004863] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.004864] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.004866] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.004867] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.004868] ACPI: SSDT 0x000000006FFDE000 008E92 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.004869] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.004871] ACPI: SSDT 0x000000006FFB3000 004A7D (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.004872] ACPI: SSDT 0x000000006FFB1000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.004873] ACPI: SSDT 0x000000006FFAD000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.004875] ACPI: HPET 0x000000006FFAB000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004876] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004877] ACPI: APIC 0x000000006FFA9000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.004878] ACPI: MCFG 0x000000006FFA8000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004880] ACPI: SSDT 0x000000006FFA7000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.004881] ACPI: SSDT 0x000000006FFA1000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.004882] ACPI: SSDT 0x000000006FF96000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.004883] ACPI: LPIT 0x000000006FF95000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004885] ACPI: SSDT 0x000000006FF94000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.004886] ACPI: SSDT 0x000000006FF93000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.004887] ACPI: DBGP 0x000000006FF92000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004888] ACPI: DBG2 0x000000006FF91000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004890] ACPI: NHLT 0x000000006FF90000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004891] ACPI: SSDT 0x000000006FF8E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.004892] ACPI: SSDT 0x000000006FF87000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.004893] ACPI: ECDT 0x000000006FF86000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.004894] ACPI: DMAR 0x000000006FF85000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004896] ACPI: FPDT 0x000000006FF84000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004897] ACPI: SSDT 0x000000006FF83000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.004898] ACPI: SSDT 0x000000006FF81000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.004899] ACPI: SSDT 0x000000006FF7E000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.004901] ACPI: SDEV 0x000000006FFAA000 000046 (v01 00000000 00000000)
<6>[ 0.004902] ACPI: SSDT 0x000000006FF72000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.004903] ACPI: SSDT 0x000000006FF64000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.004905] ACPI: ASF! 0x000000006FF63000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.004906] ACPI: PHAT 0x000000006FF62000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.004907] ACPI: BGRT 0x000000006FF61000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004908] ACPI: Reserving FACP table memory at [mem 0x6ffac000-0x6ffac113]
<6>[ 0.004910] ACPI: Reserving DSDT table memory at [mem 0x6ffb8000-0x6ffdcfce]
<6>[ 0.004910] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.004910] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.004911] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.004911] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.004911] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.004911] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.004912] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.004912] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.004912] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.004913] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.004913] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.004913] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.004913] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.004914] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.004914] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.004914] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6e91]
<6>[ 0.004915] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.004915] ACPI: Reserving SSDT table memory at [mem 0x6ffb3000-0x6ffb7a7c]
<6>[ 0.004915] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb240e]
<6>[ 0.004916] ACPI: Reserving SSDT table memory at [mem 0x6ffad000-0x6ffb0955]
<6>[ 0.004916] ACPI: Reserving HPET table memory at [mem 0x6ffab000-0x6ffab037]
<6>[ 0.004916] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.004916] ACPI: Reserving APIC table memory at [mem 0x6ffa9000-0x6ffa90d7]
<6>[ 0.004917] ACPI: Reserving MCFG table memory at [mem 0x6ffa8000-0x6ffa803b]
<6>[ 0.004917] ACPI: Reserving SSDT table memory at [mem 0x6ffa7000-0x6ffa76e2]
<6>[ 0.004917] ACPI: Reserving SSDT table memory at [mem 0x6ffa1000-0x6ffa6320]
<6>[ 0.004918] ACPI: Reserving SSDT table memory at [mem 0x6ff96000-0x6ffa0469]
<6>[ 0.004918] ACPI: Reserving LPIT table memory at [mem 0x6ff95000-0x6ff950cb]
<6>[ 0.004918] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff94d5b]
<6>[ 0.004919] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff931ef]
<6>[ 0.004919] ACPI: Reserving DBGP table memory at [mem 0x6ff92000-0x6ff92033]
<6>[ 0.004919] ACPI: Reserving DBG2 table memory at [mem 0x6ff91000-0x6ff91053]
<6>[ 0.004920] ACPI: Reserving NHLT table memory at [mem 0x6ff90000-0x6ff902e2]
<6>[ 0.004920] ACPI: Reserving SSDT table memory at [mem 0x6ff8e000-0x6ff8f15b]
<6>[ 0.004920] ACPI: Reserving SSDT table memory at [mem 0x6ff87000-0x6ff8d53a]
<6>[ 0.004920] ACPI: Reserving ECDT table memory at [mem 0x6ff86000-0x6ff86068]
<6>[ 0.004921] ACPI: Reserving DMAR table memory at [mem 0x6ff85000-0x6ff850d7]
<6>[ 0.004921] ACPI: Reserving FPDT table memory at [mem 0x6ff84000-0x6ff84043]
<6>[ 0.004921] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff8386c]
<6>[ 0.004922] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff82121]
<6>[ 0.004922] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff80462]
<6>[ 0.004922] ACPI: Reserving SDEV table memory at [mem 0x6ffaa000-0x6ffaa045]
<6>[ 0.004923] ACPI: Reserving SSDT table memory at [mem 0x6ff72000-0x6ff7c4f9]
<6>[ 0.004923] ACPI: Reserving SSDT table memory at [mem 0x6ff64000-0x6ff71815]
<6>[ 0.004923] ACPI: Reserving ASF! table memory at [mem 0x6ff63000-0x6ff63073]
<6>[ 0.004924] ACPI: Reserving PHAT table memory at [mem 0x6ff62000-0x6ff626df]
<6>[ 0.004924] ACPI: Reserving BGRT table memory at [mem 0x6ff61000-0x6ff61037]
<6>[ 0.004988] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005190] No NUMA configuration found
<6>[ 0.005190] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005195] NODE_DATA(0) allocated [mem 0x87f353100-0x87f37dfff]
<6>[ 0.005306] Zone ranges:
<6>[ 0.005307] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005308] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005309] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005309] Device empty
<6>[ 0.005310] Movable zone start for each node
<6>[ 0.005310] Early memory node ranges
<6>[ 0.005311] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005311] node 0: [mem 0x0000000000100000-0x000000006cb59fff]
<6>[ 0.005312] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005312] node 0: [mem 0x0000000104400000-0x000000087f7fffff]
<6>[ 0.005314] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005318] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005336] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007339] On node 0, zone DMA32: 13477 pages in unavailable ranges
<6>[ 0.035906] On node 0, zone Normal: 17408 pages in unavailable ranges
<6>[ 0.035973] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036434] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036439] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.036489] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.036491] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.036492] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.036494] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.036495] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.036506] e820: update [mem 0x69061000-0x6907bfff] usable ==> reserved
<6>[ 0.036512] TSC deadline timer available
<6>[ 0.036513] CPU topo: Max. logical packages: 1
<6>[ 0.036514] CPU topo: Max. logical dies: 1
<6>[ 0.036514] CPU topo: Max. dies per package: 1
<6>[ 0.036516] CPU topo: Max. threads per core: 1
<6>[ 0.036516] CPU topo: Num. cores per package: 8
<6>[ 0.036517] CPU topo: Num. threads per package: 8
<6>[ 0.036517] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.036529] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.036530] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.036531] PM: hibernation: Registered nosave memory: [mem 0x68677000-0x68677fff]
<6>[ 0.036532] PM: hibernation: Registered nosave memory: [mem 0x69061000-0x6907bfff]
<6>[ 0.036533] PM: hibernation: Registered nosave memory: [mem 0x6cb5a000-0x6fed2fff]
<6>[ 0.036533] PM: hibernation: Registered nosave memory: [mem 0x6fed3000-0x6ff4ffff]
<6>[ 0.036533] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.036534] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.036535] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.036535] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.036535] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.036535] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1043fffff]
<6>[ 0.036537] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.036538] Booting paravirtualized kernel on bare hardware
<6>[ 0.036540] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
<6>[ 0.036547] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.036894] percpu: Embedded 69 pages/cpu s245760 r8192 d28672 u524288
<7>[ 0.036898] pcpu-alloc: s245760 r8192 d28672 u524288 alloc=1*2097152
<7>[ 0.036899] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.036911] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<5>[ 0.036975] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.036989] random: crng init done
<6>[ 0.038838] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.039757] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.039812] Fallback order for Node 0: 0
<6>[ 0.039816] Built 1 zonelists, mobility grouping on. Total pages: 8290041
<6>[ 0.039816] Policy zone: Normal
<6>[ 0.039825] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.039826] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.039828] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.040782] software IO TLB: area num 8.
<4>[ 0.085368] **********************************************************
<4>[ 0.085369] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085369] ** **
<4>[ 0.085369] ** This system shows unhashed kernel memory addresses **
<4>[ 0.085370] ** via the console, logs, and other interfaces. This **
<4>[ 0.085370] ** might reduce the security of your system. **
<4>[ 0.085370] ** **
<4>[ 0.085370] ** If you see this message and you are not debugging **
<4>[ 0.085371] ** the kernel, report this immediately to your system **
<4>[ 0.085371] ** administrator! **
<4>[ 0.085371] ** **
<4>[ 0.085371] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085371] **********************************************************
<6>[ 0.085659] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.085985] ftrace: allocating 58139 entries in 228 pages
<6>[ 0.092693] ftrace: allocated 228 pages with 4 groups
<6>[ 0.093886] Dynamic Preempt: voluntary
<6>[ 0.094307] Running RCU self tests
<6>[ 0.094308] Running RCU synchronous self tests
<6>[ 0.094313] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.094313] rcu: RCU lockdep checking is enabled.
<6>[ 0.094313] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.094314] Trampoline variant of Tasks RCU enabled.
<6>[ 0.094314] Rude variant of Tasks RCU enabled.
<6>[ 0.094314] Tracing variant of Tasks RCU enabled.
<6>[ 0.094315] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
<6>[ 0.094315] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.094352] Running RCU synchronous self tests
<6>[ 0.094356] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.094359] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.094362] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.104032] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.104475] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.105739] Console: colour dummy device 80x25
<6>[ 0.105747] printk: legacy console [tty0] enabled
<4>[ 0.106943] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>[ 0.106950] ... MAX_LOCKDEP_SUBCLASSES: 8
<4>[ 0.106954] ... MAX_LOCK_DEPTH: 48
<4>[ 0.106957] ... MAX_LOCKDEP_KEYS: 8192
<4>[ 0.106961] ... CLASSHASH_SIZE: 4096
<4>[ 0.106965] ... MAX_LOCKDEP_ENTRIES: 524288
<4>[ 0.106968] ... MAX_LOCKDEP_CHAINS: 524288
<4>[ 0.106972] ... CHAINHASH_SIZE: 262144
<4>[ 0.106975] memory used by lock dependency info: 54145 kB
<4>[ 0.106980] memory used for stack traces: 4224 kB
<4>[ 0.106984] per task-struct memory footprint: 1920 bytes
<6>[ 0.107030] ACPI: Core revision 20240827
<6>[ 0.107907] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.107971] APIC: Switch to symmetric I/O mode setup
<6>[ 0.107977] DMAR: Host address width 38
<6>[ 0.107981] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.108008] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.108037] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.108058] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.108083] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.108104] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89804f0efda
<6>[ 0.108143] DMAR: SATC flags: 0x1
<6>[ 0.108151] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.108157] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.108161] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.110205] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.115421] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.115439] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=12441600)
<6>[ 0.115512] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.115518] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.115694] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.115699] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.115705] process: using mwait in idle threads
<6>[ 0.115712] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.115719] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.115724] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.115731] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.115738] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.115752] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.115758] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.115763] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.115768] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.115774] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.115780] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.115785] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.115790] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.115795] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.119434] Freeing SMP alternatives memory: 48K
<6>[ 0.119434] pid_max: default: 32768 minimum: 301
<6>[ 0.119434] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.119434] landlock: Up and running.
<6>[ 0.119434] Yama: becoming mindful.
<6>[ 0.119434] AppArmor: AppArmor initialized
<6>[ 0.119434] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.119434] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.119434] Running RCU synchronous self tests
<6>[ 0.119434] Running RCU synchronous self tests
<6>[ 0.119434] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.119434] Running RCU Tasks wait API self tests
<6>[ 0.119434] Running RCU Tasks Rude wait API self tests
<6>[ 0.119434] Running RCU Tasks Trace wait API self tests
<6>[ 0.119434] Performance Events: XSAVE Architectural LBR, no PEBS fmt6+, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.119434] core: cpu_core PMU driver:
<6>[ 0.119434] ... version: 6
<6>[ 0.119434] ... bit width: 48
<6>[ 0.119434] ... generic registers: 10
<6>[ 0.119434] ... value mask: 0000ffffffffffff
<6>[ 0.119434] ... max period: 00007fffffffffff
<6>[ 0.119434] ... fixed-purpose events: 4
<6>[ 0.119434] ... event mask: 0001000f000003ff
<6>[ 0.119434] signal: max sigframe size: 3632
<6>[ 0.119434] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.119434] rcu: Hierarchical SRCU implementation.
<6>[ 0.119434] rcu: Max phase no-delay instances is 1000.
<6>[ 0.119434] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.119434] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.119434] smp: Bringing up secondary CPUs ...
<6>[ 0.119434] smpboot: x86: Booting SMP configuration:
<6>[ 0.119434] .... node #0, CPUs: #1 #2 #3
<3>[ 0.119488] psi: inconsistent task state! task=1:swapper/0 cpu=0 psi_flags=4 clear=0 set=4
<4>[ 0.135962] #4
<6>[ 0.136197] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.147876] #5 #6 #7
<6>[ 0.013836] core: cpu_atom PMU driver:
<6>[ 0.013836] ... version: 6
<6>[ 0.013836] ... bit width: 48
<6>[ 0.013836] ... generic registers: 8
<6>[ 0.013836] ... value mask: 0000ffffffffffff
<6>[ 0.013836] ... max period: 00007fffffffffff
<6>[ 0.013836] ... fixed-purpose events: 6
<6>[ 0.013836] ... event mask: 00000077000000ff
<6>[ 0.151613] smp: Brought up 1 node, 8 CPUs
<6>[ 0.151700] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.156839] Memory: 32364668K/33160164K available (24576K kernel code, 5258K rwdata, 8860K rodata, 5544K init, 68808K bss, 774524K reserved, 0K cma-reserved)
<6>[ 0.156839] devtmpfs: initialized
<6>[ 0.156839] x86/mm: Memory block size: 128MB
<6>[ 0.174030] ACPI: PM: Registering ACPI NVS region [mem 0x6fed3000-0x6ff4ffff] (512000 bytes)
<6>[ 0.174030] Running RCU synchronous self tests
<6>[ 0.174030] Running RCU synchronous self tests
<6>[ 0.174030] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
<6>[ 0.174030] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.174030] pinctrl core: initialized pinctrl subsystem
<6>[ 0.175893] PM: RTC time: 11:25:34, date: 2024-10-10
<6>[ 0.176682] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.177650] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.177946] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.178231] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.178289] audit: initializing netlink subsys (disabled)
<5>[ 0.178333] audit: type=2000 audit(1728559534.060:1): state=initialized audit_enabled=0 res=1
<6>[ 0.178333] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.178333] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.178333] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.178333] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.178333] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.178333] EISA bus registered
<6>[ 0.178333] cpuidle: using governor ladder
<6>[ 0.179466] cpuidle: using governor menu
<6>[ 0.179502] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.179835] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.179862] PCI: Using configuration type 1 for base access
<6>[ 0.179993] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.179993] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.179993] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.179993] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.179993] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.254068] raid6: avx2x4 gen() 24943 MB/s
<6>[ 0.322234] raid6: avx2x2 gen() 31306 MB/s
<6>[ 0.390399] raid6: avx2x1 gen() 27527 MB/s
<6>[ 0.390410] raid6: using algorithm avx2x2 gen() 31306 MB/s
<6>[ 0.458559] raid6: .... xor() 19742 MB/s, rmw enabled
<6>[ 0.458572] raid6: using avx2x2 recovery algorithm
<6>[ 0.463186] fbcon: Taking over console
<6>[ 0.463243] ACPI: Added _OSI(Module Device)
<6>[ 0.463243] ACPI: Added _OSI(Processor Device)
<6>[ 0.463243] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.463243] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.910292] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.932115] ACPI: EC: EC started
<6>[ 0.932141] ACPI: EC: interrupt blocked
<6>[ 0.936635] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.936646] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 1.027468] Callback from call_rcu_tasks() invoked.
<6>[ 1.218007] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.218024] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.243318] ACPI: Interpreter enabled
<6>[ 1.243410] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.243417] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.248189] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.248196] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.266822] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.266872] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.340705] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.341031] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.343943] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.542352] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.554866] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.692418] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.693953] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.701930] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.711010] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.711246] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.711796] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.761434] ACPI: \: Can't tag data node
<3>[ 1.762548] ACPI: \: Can't tag data node
<3>[ 1.763668] ACPI: \: Can't tag data node
<3>[ 1.764684] ACPI: \: Can't tag data node
<3>[ 1.765783] ACPI: \: Can't tag data node
<6>[ 1.868887] ACPI: \_TZ_.FN00: New power resource
<6>[ 1.869383] ACPI: \_TZ_.FN01: New power resource
<6>[ 1.869859] ACPI: \_TZ_.FN02: New power resource
<6>[ 1.870326] ACPI: \_TZ_.FN03: New power resource
<6>[ 1.870794] ACPI: \_TZ_.FN04: New power resource
<6>[ 1.873196] ACPI: \PIN_: New power resource
<6>[ 1.876413] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 1.876428] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 1.878966] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 1.884394] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 1.892883] PCI host bridge to bus 0000:00
<6>[ 1.892913] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 1.892920] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 1.892927] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 1.892934] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 1.892941] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 1.892949] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 1.896481] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 1.897026] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 1.897079] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 1.897119] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 1.897168] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 1.897210] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 1.898380] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 1.898397] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 1.899528] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 1.899545] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 1.899562] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 1.900345] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 1.900395] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 1.900407] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 1.900425] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 1.900644] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 1.900704] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 1.905406] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 1.905461] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 1.905473] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 1.905491] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 1.905688] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 1.905749] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 1.909593] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 1.909647] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 1.909659] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 1.909678] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 1.909873] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 1.909926] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 1.914244] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 1.914263] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 1.914293] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 1.914485] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 1.914501] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 1.914517] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 1.914896] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 1.914922] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 1.915016] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 1.916489] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 1.916516] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 1.916534] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 1.916612] pci 0000:00:0d.2: supports D1 D2
<6>[ 1.916616] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.917773] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 1.917800] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 1.917818] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 1.917896] pci 0000:00:0d.3: supports D1 D2
<6>[ 1.917900] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.919083] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 1.919111] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 1.919206] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 1.921998] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 1.922042] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 1.922197] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 1.922574] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 1.922602] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 1.922702] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 1.924441] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 1.924470] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 1.924490] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 1.924802] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.924861] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.926249] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.926310] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.927722] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.927784] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.929137] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.929198] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.930522] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 1.930560] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 1.930719] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 1.933534] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 1.933565] pci 0000:00:16.3: BAR 0 [io 0x4020-0x4027]
<6>[ 1.933582] pci 0000:00:16.3: BAR 1 [mem 0x94421000-0x94421fff]
<6>[ 1.933881] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 1.933917] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 1.933925] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 1.933932] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 1.934052] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 1.934108] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 1.938289] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 1.938404] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 1.938436] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 1.938772] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 1.938933] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 1.944361] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 1.945801] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 1.945852] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 1.945913] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 1.946036] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 1.946391] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 1.946424] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 1.946453] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 1.947548] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.947614] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 1.947998] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 1.948029] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 1.948168] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 1.949403] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 1.949553] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 1.949715] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 1.949884] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 1.949910] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 1.949940] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 1.949962] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 1.950132] pci 0000:7f:00.0: supports D1 D2
<6>[ 1.950136] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.950675] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 1.957425] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 1.957833] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 1.957862] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 1.958432] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 1.958486] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.335108] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 13.492002] Low-power S0 idle used by default for system suspend
<6>[ 13.545729] ACPI: EC: interrupt unblocked
<6>[ 13.545740] ACPI: EC: event unblocked
<6>[ 13.545775] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 13.545781] ACPI: EC: GPE=0x6e
<6>[ 13.545787] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 13.545795] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 13.546248] iommu: Default domain type: Translated
<6>[ 13.546248] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 13.546248] SCSI subsystem initialized
<7>[ 13.547714] libata version 3.00 loaded.
<6>[ 13.547800] ACPI: bus type USB registered
<6>[ 13.547962] usbcore: registered new interface driver usbfs
<6>[ 13.548049] usbcore: registered new interface driver hub
<6>[ 13.548148] usbcore: registered new device driver usb
<6>[ 13.548443] pps_core: LinuxPPS API ver. 1 registered
<6>[ 13.548453] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 13.548453] PTP clock support registered
<6>[ 13.548453] EDAC MC: Ver: 3.0.0
<6>[ 13.555621] efivars: Registered efivars operations
<6>[ 13.556650] NetLabel: Initializing
<6>[ 13.556650] NetLabel: domain hash size = 128
<6>[ 13.556650] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 13.556650] NetLabel: unlabeled traffic allowed by default
<6>[ 13.560118] mctp: management component transport protocol core
<6>[ 13.560150] NET: Registered PF_MCTP protocol family
<6>[ 13.560150] PCI: Using ACPI for IRQ routing
<7>[ 13.619499] PCI: pci_cache_line_size set to 64 bytes
<6>[ 13.619915] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 13.620216] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 13.620239] e820: reserve RAM buffer [mem 0x68677000-0x6bffffff]
<7>[ 13.620247] e820: reserve RAM buffer [mem 0x69061000-0x6bffffff]
<7>[ 13.620253] e820: reserve RAM buffer [mem 0x6cb5a000-0x6fffffff]
<7>[ 13.620260] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 13.623650] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 13.623650] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 13.623650] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 13.623650] vgaarb: loaded
<6>[ 13.624142] clocksource: Switched to clocksource tsc-early
<5>[ 13.626252] VFS: Disk quotas dquot_6.6.0
<6>[ 13.626312] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 13.628361] AppArmor: AppArmor Filesystem Enabled
<6>[ 13.628780] pnp: PnP ACPI init
<6>[ 13.631087] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 13.631121] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 13.634995] system 00:02: [io 0x06a4] has been reserved
<6>[ 13.635023] system 00:02: [io 0x06a0] has been reserved
<6>[ 13.693674] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 13.693704] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 13.693733] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 13.693755] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 13.693777] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 13.693802] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 13.693827] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 13.693863] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 13.702608] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 13.710838] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 13.711251] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 13.725620] pnp: PnP ACPI: found 8 devices
<6>[ 13.749017] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 13.750290] NET: Registered PF_INET protocol family
<6>[ 13.750625] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.757394] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 13.757817] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 13.758125] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.759426] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 13.762590] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 13.766121] MPTCP token hash table entries: 32768 (order: 9, 2883584 bytes, linear)
<6>[ 13.767601] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 13.768940] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 13.770309] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 13.770430] NET: Registered PF_XDP protocol family
<6>[ 13.770463] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 13.770492] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 13.770516] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 13.770610] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 13.770628] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 13.770643] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]: assigned
<6>[ 13.770661] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 13.770784] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 13.770872] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 13.770961] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 13.771049] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 13.771123] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 13.771143] pci 0000:00:07.0: bridge window [io 0x5000-0x5fff]
<6>[ 13.771164] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 13.771191] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.771219] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 13.771235] pci 0000:00:07.1: bridge window [io 0x6000-0x6fff]
<6>[ 13.771256] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 13.771276] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.771309] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 13.771324] pci 0000:00:07.2: bridge window [io 0x7000-0x7fff]
<6>[ 13.771345] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 13.771364] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.771398] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 13.771412] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 13.771432] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 13.771461] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 13.771507] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 13.771570] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 13.771587] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 13.771601] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 13.771616] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 13.771631] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 13.771648] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
<6>[ 13.771661] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 13.771675] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.771692] pci_bus 0000:2b: resource 0 [io 0x6000-0x6fff]
<6>[ 13.771707] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 13.771721] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.771738] pci_bus 0000:55: resource 0 [io 0x7000-0x7fff]
<6>[ 13.771752] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 13.771766] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.771783] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 13.771796] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 13.771810] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 13.774614] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 13.777936] PCI: CLS 0 bytes, default 64
<6>[ 13.778098] DMAR: Intel-IOMMU force enabled due to platform opt in
<6>[ 13.778152] DMAR: No RMRR found
<6>[ 13.778180] DMAR: No ATSR found
<6>[ 13.778189] DMAR: IOMMU feature nwfs inconsistent
<6>[ 13.778194] DMAR: IOMMU feature dit inconsistent
<6>[ 13.778215] DMAR: IOMMU feature nest inconsistent
<6>[ 13.778226] DMAR: IOMMU feature sc_support inconsistent
<6>[ 13.778238] DMAR: IOMMU feature dev_iotlb_support inconsistent
<6>[ 13.778250] DMAR: dmar1: Using Queued invalidation
<6>[ 13.778307] DMAR: dmar0: Using Queued invalidation
<6>[ 13.778325] DMAR: dmar2: Using Queued invalidation
<6>[ 13.779949] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 13.780125] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 13.780275] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 13.780402] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 13.782451] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 13.784246] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 13.784403] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 13.784546] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 13.784680] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 13.784885] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 13.784985] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 13.785086] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 13.785234] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 13.785399] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 13.785572] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 13.785673] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 13.785943] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 13.786047] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 13.786147] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 13.786255] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 13.786429] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 13.786539] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 13.786666] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 13.786831] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 13.787076] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 13.787196] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 13.787298] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 13.787400] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 13.787505] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 13.787630] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 13.787777] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 13.788954] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 13.788968] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 13.788982] software IO TLB: mapped [mem 0x0000000063b5b000-0x0000000067b5b000] (64MB)
<6>[ 13.794559] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 13.794753] clocksource: Switched to clocksource tsc
<6>[ 13.795479] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 13.805794] Initialise system trusted keyrings
<5>[ 13.806477] Key type blacklist registered
<6>[ 13.806958] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 13.815363] zbud: loaded
<6>[ 13.817359] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 13.818523] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 13.818535] ntfs3: Read-only LZX/Xpress compression included
<6>[ 13.818603] fuse: init (API version 7.41)
<5>[ 13.819536] integrity: Platform Keyring initialized
<5>[ 13.819569] integrity: Machine keyring initialized
<6>[ 13.831270] xor: automatically using best checksumming function avx
<5>[ 13.831287] Key type asymmetric registered
<5>[ 13.831306] Asymmetric key parser 'x509' registered
<6>[ 13.831479] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 13.832014] io scheduler mq-deadline registered
<6>[ 13.833334] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 13.835817] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 13.836069] pcieport 0000:00:07.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 13.839492] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 13.839736] pcieport 0000:00:07.1: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 13.842639] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 13.842860] pcieport 0000:00:07.2: pciehp: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 13.845530] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 13.847757] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 13.848559] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 13.853310] Monitor-Mwait will be used to enter C-1 state
<7>[ 13.853388] Monitor-Mwait will be used to enter C-2 state
<7>[ 13.853439] Monitor-Mwait will be used to enter C-3 state
<6>[ 13.863506] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 13.863802] ACPI: button: Lid Switch [LID0]
<6>[ 13.864206] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 13.864476] ACPI: button: Sleep Button [SLPB]
<6>[ 13.864809] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 13.865605] ACPI: button: Power Button [PWRB]
<6>[ 14.309311] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 14.309335] ACPI: thermal: Thermal Zone [TZ00] (51 C)
<6>[ 14.311006] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 14.311449] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 14.313528] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 14.337680] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 14.377469] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 14.380430] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 14.405677] 0000:00:16.3: ttyS4 at I/O 0x4020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 14.410623] hpet_acpi_add: no address or irqs in _CRS
<6>[ 14.410946] Linux agpgart interface v0.103
<6>[ 14.450612] loop: module loaded
<6>[ 14.462106] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 14.478139] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 14.496191] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 14.513366] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<6>[ 14.532768] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 14.533508] tun: Universal TUN/TAP device driver, 1.6
<6>[ 14.534482] PPP generic driver version 2.4.2
<6>[ 14.535726] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.535902] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 14.536535] nvme nvme0: pci function 0000:80:00.0
<6>[ 14.537197] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.542608] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 14.542797] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 14.542931] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.545214] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 14.545258] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.545274] usb usb1: Product: xHCI Host Controller
<6>[ 14.545285] usb usb1: Manufacturer: Linux 6.12.0-rc2-xe xhci-hcd
<6>[ 14.545298] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 14.549742] hub 1-0:1.0: USB hub found
<6>[ 14.550379] hub 1-0:1.0: 1 port detected
<6>[ 14.555579] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 14.555592] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.555602] usb usb2: Product: xHCI Host Controller
<6>[ 14.555609] usb usb2: Manufacturer: Linux 6.12.0-rc2-xe xhci-hcd
<6>[ 14.555617] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 14.557835] hub 2-0:1.0: USB hub found
<6>[ 14.558096] hub 2-0:1.0: 3 ports detected
<6>[ 14.572759] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.572775] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 14.573926] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 14.574914] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 14.574930] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 14.574940] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 14.575065] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 14.575073] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.575078] usb usb3: Product: xHCI Host Controller
<6>[ 14.575083] usb usb3: Manufacturer: Linux 6.12.0-rc2-xe xhci-hcd
<6>[ 14.575087] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 14.576124] hub 3-0:1.0: USB hub found
<6>[ 14.576158] hub 3-0:1.0: 8 ports detected
<6>[ 14.587871] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 14.595184] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 14.595194] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.595200] usb usb4: Product: xHCI Host Controller
<6>[ 14.595204] usb usb4: Manufacturer: Linux 6.12.0-rc2-xe xhci-hcd
<6>[ 14.595209] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 14.596150] hub 4-0:1.0: USB hub found
<6>[ 14.596180] hub 4-0:1.0: 2 ports detected
<6>[ 14.600570] usbcore: registered new interface driver usb-storage
<6>[ 14.600678] usbcore: registered new interface driver usbserial_generic
<6>[ 14.600743] usbserial: USB Serial support registered for generic
<6>[ 14.600785] usbcore: registered new interface driver ftdi_sio
<6>[ 14.600812] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 14.600867] usbcore: registered new interface driver pl2303
<6>[ 14.600896] usbserial: USB Serial support registered for pl2303
<6>[ 14.601010] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 14.601016] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>[ 14.609812] nvme0n1: p1 p2
<3>[ 15.308987] i8042: Can't read CTR while initializing i8042
<3>[ 15.308993] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 15.311398] mousedev: PS/2 mouse device common for all mice
<6>[ 15.312285] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 15.314083] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 15.314299] rtc_cmos rtc_cmos: setting system clock to 2024-10-10T11:25:49 UTC (1728559549)
<6>[ 15.314480] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 15.314534] i2c_dev: i2c /dev entries driver
<6>[ 15.319053] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 15.319069] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 15.319080] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 15.319119] device-mapper: uevent: version 1.0.3
<6>[ 15.319453] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 15.319610] platform eisa.0: Probing EISA bus 0
<4>[ 15.319625] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 15.319643] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 15.319656] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 15.319672] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 15.319688] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 15.319703] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 15.319718] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 15.319732] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 15.319745] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 15.319754] platform eisa.0: EISA: Detected 0 cards
<6>[ 15.319764] intel_pstate: Intel P-state driver initializing
<6>[ 15.323220] Hybrid CPU capacity scaling enabled
<6>[ 15.324539] intel_pstate: HWP enabled
<6>[ 15.324549] sdhci: Secure Digital Host Controller Interface driver
<6>[ 15.324557] sdhci: Copyright(c) Pierre Ossman
<6>[ 15.327251] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 15.327530] efifb: probing for efifb
<6>[ 15.327588] efifb: framebuffer at 0x2000800000, using 20252k, total 20250k
<6>[ 15.327598] efifb: mode is 2880x1800x32, linelength=11520, pages=1
<6>[ 15.327607] efifb: scrolling: redraw
<6>[ 15.327612] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
<6>[ 15.328412] Console: switching to colour frame buffer device 180x56
<6>[ 15.332687] fb0: EFI VGA frame buffer device
<6>[ 15.333143] drop_monitor: Initializing network drop monitor service
<6>[ 15.333450] NET: Registered PF_INET6 protocol family
<6>[ 15.336223] Segment Routing with IPv6
<6>[ 15.336362] In-situ OAM (IOAM) with IPv6
<6>[ 15.336429] NET: Registered PF_PACKET protocol family
<5>[ 15.336606] Key type dns_resolver registered
<4>[ 15.341264] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 15.341779] microcode: Current revision: 0x00000115
<6>[ 15.342469] IPI shorthand broadcast: enabled
<6>[ 15.351268] sched_clock: Marking stable (15340001527, 9836394)->(15392369554, -42531633)
<6>[ 15.352029] registered taskstats version 1
<5>[ 15.353567] Loading compiled-in X.509 certificates
<6>[ 15.369545] Demotion targets for Node 0: null
<6>[ 15.369910] kmemleak: Kernel memory leak detector initialized (mem pool available: 15711)
<6>[ 15.369912] kmemleak: Automatic memory scanning thread started
<5>[ 15.370627] Key type .fscrypt registered
<5>[ 15.370709] Key type fscrypt-provisioning registered
<6>[ 15.373246] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 15.375148] Key type encrypted registered
<6>[ 15.375252] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 15.375359] ima: No TPM chip found, activating TPM-bypass!
<5>[ 15.375479] Loading compiled-in module X.509 certificates
<5>[ 15.376039] Loaded X.509 cert 'Build time autogenerated kernel key: 28c91a5fdc1cd14ab2bcb6d647d5aada18172c61'
<6>[ 15.376148] ima: Allocated hash algorithm: sha1
<6>[ 15.376201] ima: No architecture policies found
<6>[ 15.376304] evm: Initialising EVM extended attributes:
<6>[ 15.376398] evm: security.selinux
<6>[ 15.376417] evm: security.SMACK64
<6>[ 15.376436] evm: security.SMACK64EXEC
<6>[ 15.376456] evm: security.SMACK64TRANSMUTE
<6>[ 15.377494] evm: security.SMACK64MMAP
<6>[ 15.378670] evm: security.apparmor
<6>[ 15.379746] evm: security.ima
<6>[ 15.380743] evm: security.capability
<6>[ 15.381748] evm: HMAC attrs: 0x1
<6>[ 15.386134] PM: Magic number: 12:316:428
<6>[ 15.387419] printk: legacy console [netcon0] enabled
<6>[ 15.388518] netconsole: network logging started
<6>[ 15.390409] RAS: Correctable Errors collector initialized.
<6>[ 15.391651] clk: Disabling unused clocks
<6>[ 15.393086] PM: genpd: Disabling unused power domains
<6>[ 15.394403] md: Waiting for all devices to be available before autodetect
<6>[ 15.395568] md: If you don't use raid, use raid=noautodetect
<6>[ 15.396679] md: Autodetecting RAID arrays.
<6>[ 15.397794] md: autorun ...
<6>[ 15.398926] md: ... autorun DONE.
<6>[ 15.444264] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none.
<6>[ 15.445510] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 15.448207] devtmpfs: mounted
<6>[ 15.461085] Freeing unused decrypted memory: 2036K
<6>[ 15.463045] Freeing unused kernel image (initmem) memory: 5544K
<6>[ 15.464239] Write protecting the kernel read-only data: 34816k
<6>[ 15.466048] Freeing unused kernel image (rodata/data gap) memory: 1380K
<6>[ 15.471038] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 15.472240] Run /sbin/init as init process
<7>[ 15.473363] with arguments:
<7>[ 15.473364] /sbin/init
<7>[ 15.473365] with environment:
<7>[ 15.473366] HOME=/
<7>[ 15.473367] TERM=linux
<7>[ 15.473367] BOOT_IMAGE=/boot/drm_intel
<7>[ 15.517260] systemd[1]: Inserted module 'autofs4'
<7>[ 15.541220] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 15.547060] systemd[1]: Detected architecture x86-64.
<7>[ 15.554861] systemd[1]: Hostname set to <shard-lnl-4>.
<7>[ 15.723657] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 15.727225] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<7>[ 15.786894] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.818458] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.823093] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.827361] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.830738] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.834607] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 15.838436] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61...
<7>[ 15.842023] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.845575] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.849361] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.853124] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.856980] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.861128] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.866290] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.870662] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.875140] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.879573] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.884057] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.888621] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.893266] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.897955] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.902604] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.905153] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.910072] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 15.954557] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 15.965009] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 15.972484] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 15.979848] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 15.989702] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 15.996840] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 16.004373] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 16.012228] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 16.019289] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 16.023673] systemd-journald[192]: Collecting audit messages is disabled.
<7>[ 16.031189] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 16.039869] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 16.046933] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 16.053675] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 16.062834] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 16.069835] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 16.074822] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 16.080508] pstore: Using crash dump compression: deflate
<6>[ 16.082910] ACPI: bus type drm_connector registered
<7>[ 16.085750] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 16.089142] pstore: Registered efi_pstore as persistent store backend
<7>[ 16.096325] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 16.100753] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.102972] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 16.108171] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 16.117124] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 16.295012] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. Quota mode: none.
<6>[ 16.350481] Adding 8388604k swap on /swap.img. Priority:-2 extents:65 across:341704704k SS
<7>[ 16.369576] systemd-journald[192]: Received client request to flush runtime journal.
<7>[ 16.385362] systemd-journald[192]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 16.385379] systemd-journald[192]: Rotating system journal.
<6>[ 17.089880] mc: Linux media interface: v0.10
<6>[ 17.116381] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 17.125599] videodev: Linux video capture interface: v2.00
<4>[ 17.134516] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.134636] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.136960] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 17.141656] Consider using thermal netlink events interface
<6>[ 17.151516] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 17.167943] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 17.211077] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.211130] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.215356] pci 0000:00:05.0: Setting to D3hot
<6>[ 17.226103] pci 0000:00:0b.0: Setting to D3hot
<4>[ 17.237913] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 17.238118] intel_pmc_core INT33A1:00: initialized
<4>[ 17.288142] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.288214] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.371026] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.371056] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<5>[ 17.393864] audit: type=1400 audit(1728559551.571:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=372 comm="apparmor_parser"
<5>[ 17.395061] audit: type=1400 audit(1728559551.575:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=376 comm="apparmor_parser"
<5>[ 17.396398] audit: type=1400 audit(1728559551.575:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=374 comm="apparmor_parser"
<5>[ 17.401208] audit: type=1400 audit(1728559551.579:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=379 comm="apparmor_parser"
<5>[ 17.401693] audit: type=1400 audit(1728559551.579:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=378 comm="apparmor_parser"
<5>[ 17.402996] audit: type=1400 audit(1728559551.583:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=375 comm="apparmor_parser"
<5>[ 17.403410] audit: type=1400 audit(1728559551.583:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=377 comm="apparmor_parser"
<5>[ 17.405818] audit: type=1400 audit(1728559551.583:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=380 comm="apparmor_parser"
<5>[ 17.407126] audit: type=1400 audit(1728559551.587:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=381 comm="apparmor_parser"
<5>[ 17.408687] audit: type=1400 audit(1728559551.587:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=382 comm="apparmor_parser"
<4>[ 17.520149] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.520182] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.648498] ACPI: bus type thunderbolt registered
<6>[ 17.684023] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 17.704477] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 17.739439] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 17.748456] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 17.748463] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 17.748581] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 17.751558] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 17.754357] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 17.761464] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 17.785360] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 175
<6>[ 17.785368] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<4>[ 17.800914] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.800943] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.870529] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 17.892666] intel_rapl_common: Found RAPL domain package
<6>[ 17.892671] intel_rapl_common: Found RAPL domain dram
<4>[ 17.901986] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.902171] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.975633] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.975667] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 17.975674] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 17.975676] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 17.975677] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 17.975678] RAPL PMU: hw unit of domain psys 2^-14 Joules
<4>[ 17.992202] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.992227] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.994767] cryptd: max_cpu_qlen set to 1000
<6>[ 17.999208] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 18.024622] AES CTR mode by8 optimization enabled
<4>[ 18.065781] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.065810] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.095406] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:c8
<6>[ 18.095418] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 18.095535] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<4>[ 18.117326] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.117360] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.213659] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.213688] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.425621] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 18.453413] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<4>[ 18.486279] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.486312] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.592727] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.592759] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.653968] block nvme0n1: No UUID available providing old NGUID
<4>[ 18.704765] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.704797] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.710271] intel_rapl_common: Found RAPL domain package
<6>[ 18.710276] intel_rapl_common: Found RAPL domain core
<6>[ 18.710280] intel_rapl_common: Found RAPL domain dram
<6>[ 18.710282] intel_rapl_common: Found RAPL domain psys
<4>[ 18.773294] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.773324] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.779056] evm: overlay not supported
<4>[ 18.833547] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.833567] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.866960] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 18.908417] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.908450] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 19.014753] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 19.117924] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<5>[ 19.118903] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 19.118921] 0x000000000000-0x000002000000 : "BIOS"
<4>[ 19.181924] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.181959] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 19.253183] loop0: detected capacity change from 0 to 8
<6>[ 19.306206] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 19.455563] hid: raw HID events driver (C) Jiri Kosina
<6>[ 19.462245] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 19.503634] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.505827] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.509573] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.510789] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.512797] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.513752] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.519604] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.522248] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.526613] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.529605] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 19.534894] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.537715] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<4>[ 19.591796] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.591827] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 19.645821] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.646123] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 19.713025] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.713046] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 19.768042] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 19.768058] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 20.853878] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 20.853895] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 24.374007] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<6>[ 26.738577] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 26.738610] typec port0: bound usb2-port1 (ops connector_ops)
<4>[ 30.075328] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 30.075353] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 30.076069] platform INT3472:01: deferred probe pending: int3472-discrete: Failed to get GPIO
<7>[ 39.291456] systemd-journald[192]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<6>[ 39.653699] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 39.653731] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 103.000932] Console: switching to colour dummy device 80x25
<7>[ 103.000980] [IGT] xe_module_load: executing
<7>[ 103.004190] [IGT] xe_module_load: starting subtest load
<6>[ 103.156453] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 103.161980] xe 0000:00:02.0: [drm] Found LUNARLAKE (device ID 64a0) display version 20.00 stepping B0
<7>[ 103.161988] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG (20.04) media:Xe2_LPM / Xe2_HPM / Xe3_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 103.162072] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 103.162141] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 103.165551] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.29.2
<7>[ 103.168973] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x0024e3d7
<7>[ 103.169060] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 103.169127] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 103.169210] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7>[ 103.169281] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006c2
<7>[ 103.169355] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 103.169418] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 103.169475] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 103.169530] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 103.169584] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 103.169636] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 103.169687] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 103.169738] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 103.169786] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 103.169836] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 103.169927] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 103.170961] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 103.171039] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 103.175975] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 103.178583] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 103.179459] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 103.179594] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 103.179747] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000df
<7>[ 103.179863] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000000df
<7>[ 103.179972] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 103.180077] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 103.180178] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 103.181004] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.29.2
<7>[ 103.185020] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c563d7
<7>[ 103.185121] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 103.185225] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 103.185308] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000003
<7>[ 103.185390] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ad2
<7>[ 103.185469] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 103.185546] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 103.185621] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 103.185692] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 103.185762] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 103.185831] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 103.185898] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 103.185969] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 103.186046] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 103.189905] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 103.192473] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1161
<6>[ 103.193487] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 103.193566] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 103.193668] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 103.195117] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 103.195350] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 103.213323] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 18ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 103.213810] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 103.214024] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 103.214202] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 103.214371] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 103.214526] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 103.214705] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 103.214863] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 103.215044] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 103.215341] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 103.215549] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 103.215749] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 103.215944] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 103.216135] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 103.216370] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 103.216590] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 103.216844] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 103.217082] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 103.217435] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 103.217691] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 103.217937] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 103.218166] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 103.218376] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 103.218583] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 103.218778] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.218997] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.219196] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 103.219376] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.219544] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.219738] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.219919] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 103.220075] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.220232] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.220416] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.220585] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 103.220740] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.220892] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.221044] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.221213] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 103.221350] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.221480] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.221605] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.221748] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 103.221891] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 103.222014] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 103.222145] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 103.222274] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 103.223303] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 103.223518] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 103.223684] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 103.223838] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 103.223985] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 103.224129] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 103.224271] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 103.224411] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 103.224548] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 103.224702] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 103.224849] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 103.224995] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 103.225135] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 103.225304] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 103.225452] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 103.225595] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 103.225739] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 103.225881] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 103.226031] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 103.226189] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 103.226347] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 103.226504] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 103.226670] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 103.226829] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 103.226988] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 103.227146] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 103.227303] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 103.227480] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 103.227730] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 103.228032] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 103.228273] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 103.228582] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 103.228847] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 103.229100] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 103.229313] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 103.229495] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 103.229706] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 103.229890] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
<7>[ 103.229928] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 103.230135] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 103.230312] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 103.230485] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 103.231260] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 103.231572] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 103.232765] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 103.234825] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 103.235076] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 103.235241] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 103.235381] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 103.235507] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 103.235625] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 103.235736] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 103.235845] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 103.239846] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 103.239996] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 103.240110] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 103.240210] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 103.240317] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 103.240493] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x578856c4 (EVT_HTP)
<7>[ 103.240675] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 103.240839] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 103.241002] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 103.241194] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 103.241357] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 103.241518] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 103.241692] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 103.241853] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 103.242012] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 103.242170] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 103.242329] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 103.242493] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 103.242669] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 103.242833] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 103.242992] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 103.243151] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 103.243310] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 103.243470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 103.244234] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 103.249730] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 103.249993] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 103.250211] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 103.250515] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 103.250815] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 103.251167] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 103.251392] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 103.251598] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 103.251804] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 103.251992] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 103.252172] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 103.252351] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 103.252527] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 103.252703] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 103.252928] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 103.253291] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 103.253491] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 103.253675] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 103.253855] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 103.254025] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 103.254334] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<6>[ 103.254437] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.21)
<7>[ 103.254684] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 103.256189] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 103.256482] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 103.258812] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 103.259492] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 103.260424] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85
<7>[ 103.261545] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 103.262221] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 103.264658] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 103.276403] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 103.276481] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.276485] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.276488] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 103.276530] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.276532] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 103.276569] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.276572] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 103.276607] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.276688] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.276691] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.276694] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.276711] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 103.277423] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 103.277988] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 103.278110] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 103.278271] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 103.278449] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 103.278765] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 103.278952] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 103.279131] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 103.279302] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 103.279390] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 103.279502] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 103.279724] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 103.280030] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 103.280162] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 103.280597] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 103.280725] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 103.280854] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 103.281120] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 103.281260] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 103.281389] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 103.281734] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 103.281949] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 103.282094] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 103.282221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 103.282323] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 103.282486] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 103.282644] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 103.282800] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 103.282956] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 103.283113] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 103.283269] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 103.283386] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 103.283462] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 103.283536] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 103.283611] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 103.283687] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 103.283761] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 103.283836] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 103.283911] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 103.283985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 103.284059] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 103.284133] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 103.284931] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 103.285053] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 103.285154] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 103.285261] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 103.285346] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 103.285425] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 103.285501] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 103.285581] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 103.285661] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 103.285737] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 103.285811] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 103.285885] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 103.285963] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 103.286043] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 103.286119] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 103.286192] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 103.286264] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 103.286399] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 103.286482] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 103.286559] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 103.286636] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 103.286823] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 103.286902] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 103.286975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 103.287047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 103.287119] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 103.287190] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 103.287264] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 103.287376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 103.287456] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 103.287530] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 103.287602] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 103.287673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 103.287744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 103.287815] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 103.287922] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 103.288000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 103.288073] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 103.288147] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 103.288218] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 103.288288] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 103.288359] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 103.288607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 103.288717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 103.288816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 103.288910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 103.289002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 103.289092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 103.289186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 103.289276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 103.289363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 103.289449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 103.289533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 103.289617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 103.289701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 103.289784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 103.289868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, pipeline full: 0, guardband: 105 flipline: 1906, vmin vblank: 1802, vmax vblank: 1801
<7>[ 103.289952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 103.290036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 103.290120] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 103.290204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 103.290288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 103.290372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 103.290457] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 103.290542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 103.290625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 103.290708] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 103.290791] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 103.290874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 103.290957] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 103.291039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 103.291122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.291205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.291287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.291370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 103.291453] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 103.291536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.291618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.291701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.291783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 103.291866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 103.291948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 103.292181] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 103.292276] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 103.292360] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 103.292705] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 103.292787] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 103.317443] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 103.529703] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 103.529710] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 103.529712] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 103.530930] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 103.531064] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 103.531168] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 103.531257] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 103.531336] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 103.531415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 103.531489] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 103.531567] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 103.531644] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 103.531718] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 103.531791] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 103.531863] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 103.531933] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 103.532003] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 103.532072] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 103.532140] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 103.532205] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 103.532270] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 103.532334] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 103.532398] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 103.532462] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 103.532526] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 103.532590] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 103.532653] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 103.532717] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 103.532781] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 103.532854] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 103.532925] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 103.532998] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 103.533069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 103.533138] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 103.533235] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 103.533308] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 103.533392] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 103.533473] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 103.533547] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting rcs0 registers
<7>[ 103.533617] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 103.533684] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 103.533750] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 103.534028] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 103.534096] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 103.534160] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 103.534404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 103.534472] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 103.534537] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 103.534779] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 103.534843] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7>[ 103.534907] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 103.534975] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting ccs0 registers
<7>[ 103.535043] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 103.535107] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 103.535172] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 103.535779] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x0024e3d7
<7>[ 103.535859] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 103.535916] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000004
<7>[ 103.535966] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7>[ 103.536014] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006c2
<7>[ 103.536059] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 103.536103] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 103.536146] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 103.536188] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 103.536229] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 103.536270] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 103.536310] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 103.536350] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 103.536389] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 103.536464] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 103.536692] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 103.538558] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 103.561798] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 103.562531] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 103.562607] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 103.568082] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 103.570603] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 8ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 103.570898] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 103.571415] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 103.571474] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 103.571531] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 103.571583] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 103.571638] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 103.571689] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 103.571738] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 103.571785] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 103.571833] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 103.574277] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 103.574331] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 103.574382] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 103.576470] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 103.579582] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 103.579585] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 103.579587] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 103.579588] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 103.579589] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 103.579589] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 103.579590] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 103.579591] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 103.579592] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 103.579593] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 103.580179] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 103.580265] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 103.580342] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 103.580412] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 103.580479] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 103.580543] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 103.580603] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 103.580663] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 103.580723] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 103.580781] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 103.580839] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 103.580895] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 103.580950] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 103.581005] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 103.581057] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 103.581111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 103.581165] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 103.581238] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 103.581297] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 103.581361] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 103.581415] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 103.581464] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 103.581512] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 103.581560] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 103.581607] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 103.581653] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 103.581709] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 103.582217] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 103.582307] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 103.582693] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 103.582795] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 103.583396] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c563d7
<7>[ 103.583473] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 103.583540] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000004
<7>[ 103.583601] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000003
<7>[ 103.583658] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ad2
<7>[ 103.583713] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 103.583766] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 103.583819] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 103.583870] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 103.583921] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 103.583970] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 103.584020] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 103.584070] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 103.584119] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 103.584190] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 103.584276] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 103.610705] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 103.611758] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 103.611975] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 103.629310] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 17ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 103.629677] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 103.630305] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 103.632571] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 103.634366] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 103.677379] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 103.679369] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 103.679654] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 103.679978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 103.680281] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 103.680528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 103.680887] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 103.681211] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 103.681499] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 103.681779] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 103.682351] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 103.682715] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 103.683023] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 103.686619] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 103.692228] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 103.697054] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 103.697736] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 103.699692] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 103.699824] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 103.700425] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 103.701029] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 103.701082] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 103.701467] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 103.702224] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 103.702284] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 103.702642] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 103.703274] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 103.703331] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 103.703365] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 103.711318] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 103.714021] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 103.715122] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 103.715246] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 103.716559] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 103.716656] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 103.716748] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 103.716836] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 103.717031] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<7>[ 103.717440] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 103.718184] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 103.718685] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 103.718793] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 103.718903] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 103.719055] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 103.719081] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.719083] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.719084] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 103.719105] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.719106] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 103.719126] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.719127] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 103.719145] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.719167] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 103.719252] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 103.726017] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 103.726138] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 103.726611] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:189:eDP-1] status updated from unknown to connected (epoch counter 0->1)
<7>[ 103.726711] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 103.726822] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 103.726913] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 103.726992] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 103.727089] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 103.727171] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 103.727245] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 103.727340] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 103.727419] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 103.727619] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
<7>[ 103.727911] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 103.727933] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 103.728635] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 103.729124] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 103.729254] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 103.729360] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 103.729534] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 103.729559] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.729561] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.729562] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 103.729587] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.729588] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 103.729611] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.729612] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 103.729632] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.729647] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 103.729728] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 103.730391] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 103.730474] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 103.730964] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.730966] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 103.730968] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 103.730997] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 103.731011] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 103.731023] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 103.731033] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 103.731170] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 103.731180] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 103.731189] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 103.731295] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 103.731303] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 103.731309] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 103.731407] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 103.731415] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 103.731433] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 103.731448] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 103.731463] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 103.731537] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 103.731560] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 103.731574] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 103.731589] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 103.731602] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 16384x16384 config
<7>[ 103.731623] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 103.731653] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 103.731693] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<4>[ 103.736676] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 103.736695] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 103.738961] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01d72000
<6>[ 103.739837] fbcon: xedrmfb (fb0) is primary device
<7>[ 103.740665] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 103.740808] xe 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 103.740908] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 103.741009] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 103.741103] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 103.741282] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 103.741397] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 103.741492] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 103.741581] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 103.741667] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 103.741753] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 103.741843] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 103.741930] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 103.742009] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 103.742091] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 103.742182] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 103.742272] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 103.742355] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 103.742427] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 103.742500] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 103.742571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 103.742652] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 103.742722] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 103.742790] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 103.742862] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 103.742942] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 103.743021] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 103.743090] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 103.743154] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 103.743218] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 103.743288] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 103.743370] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 103.743451] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 103.743910] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 103.743999] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 103.744073] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 103.744148] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 103.744220] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 103.744291] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 103.744359] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744419] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744478] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744536] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 103.744593] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744651] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744707] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744763] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 103.744818] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744874] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744929] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.744987] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 103.745053] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.745125] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.745308] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.745374] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 103.745455] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.745515] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.745578] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 103.745633] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 103.745728] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 103.745820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 103.745911] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 103.745989] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 103.746066] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 103.746160] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 103.746253] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 103.746339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 103.746423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 103.746504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 103.746586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 103.746661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 103.746730] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 103.746800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 103.746867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 103.746932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 103.747001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 103.747066] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 103.747129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 103.747192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 103.747254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 103.747317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 103.747377] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 103.747438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 103.747497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 103.747558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 103.747617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1905, vmax: 2859, pipeline full: 0, guardband: 106 flipline: 1906, vmin vblank: 1800, vmax vblank: 2753
<7>[ 103.747675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 103.747733] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 103.747794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 103.747858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 103.747921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 103.747984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 103.748045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 103.748105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 103.748165] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 103.748229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 103.748288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 103.748345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 103.748404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 103.748466] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 103.748527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.748594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.748667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.748742] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 103.748816] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 103.748894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.748971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.749045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 103.749119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 103.749201] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:226] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 103.749275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 103.749347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 103.749407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 103.749476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 103.749536] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 103.749594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 103.749653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 103.753409] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 103.780804] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 103.780993] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 103.803751] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 103.961498] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 103.963488] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 103.975461] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 103.975449] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 103.975813] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 103.975921] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 103.976309] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 104.028585] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 104.028838] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 104.060497] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 104.060932] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 104.060999] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 104.061977] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 104.061994] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 104.063907] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 104.063923] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 104.064108] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 104.064293] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 104.064260] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 104.064480] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 104.064529] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 104.064785] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 104.065032] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 104.065296] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 104.065534] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 104.065766] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 104.065998] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 104.066273] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 104.066501] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 104.066723] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 104.066952] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 104.067199] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 104.068885] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 104.069251] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle
<7>[ 104.229879] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 104.669644] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 104.669982] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 104.670224] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 104.670482] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 104.706401] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 104.706725] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 104.706992] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 104.707347] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 104.734362] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 104.734335] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 104.734493] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 105.000782] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 105.003297] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 105.003866] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 105.006479] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 105.007812] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 105.009117] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 105.011240] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 105.012426] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 105.013851] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 105.014205] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 105.016308] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 105.016774] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 105.017654] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 105.018281] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 105.018686] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 105.019123] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 105.021922] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 105.021951] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 105.022335] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 105.035083] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 105.038085] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 105.038575] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 105.040169] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<7>[ 105.042773] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<6>[ 105.043129] Console: switching to colour frame buffer device 180x56
<7>[ 105.043292] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<6>[ 105.060371] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 105.097461] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 105.097943] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 105.098310] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 105.098647] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 105.098986] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 105.099282] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 105.099569] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 105.099843] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 105.100107] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 105.100369] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 105.100629] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 105.100936] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 105.101186] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 105.101503] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 105.101809] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 105.102061] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 105.102312] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 105.102604] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 105.102866] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 105.103125] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 105.103422] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 105.103382] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 105.103501] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<7>[ 105.103638] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 105.104548] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 105.104631] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 105.104917] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 105.105327] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 105.105680] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 105.106582] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 105.106985] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 105.107375] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 105.108556] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 105.109871] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 105.110312] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 105.110678] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 105.111325] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 105.111415] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.111418] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.111422] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 105.111488] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.111491] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 105.111550] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.111434] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 105.111552] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 105.111618] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.111673] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 105.111919] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 105.117739] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 105.118118] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 105.119136] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.119142] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.119144] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.119261] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 105.119328] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 105.119369] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 105.119404] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 105.119811] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 105.120173] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 105.120411] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 105.120635] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 105.120820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 105.120843] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 105.120863] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 105.121073] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 105.121239] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 105.121293] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 105.121312] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 105.121527] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 105.121702] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 105.121722] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 105.121775] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 105.121818] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 105.121862] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 105.122192] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 105.122265] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 105.122309] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 105.122353] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 105.122409] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 2880x1800 config
<7>[ 105.122512] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 105.126518] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 105.126685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 105.135242] xe 0000:00:02.0: [drm:drm_client_dev_hotplug [drm]] intel-fbdev: ret=0
<4>[ 105.140127] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 105.140142] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 105.142049] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 105.143781] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [xe])
<7>[ 105.143951] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 105.144198] xe 0000:00:02.0: [drm:i915_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 105.152662] xe 0000:00:02.0: [drm:drm_client_dev_restore [drm]] intel-fbdev: ret=0
<7>[ 105.152772] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 105.152823] [IGT] xe_module_load: exiting, ret=0
<7>[ 105.173282] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 105.173430] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 105.173520] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<4>[ 105.173790] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 105.173813] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 105.180053] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 105.180145] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 105.180210] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 105.180272] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 105.180333] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 105.180393] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 105.180452] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 105.180511] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 105.180569] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 105.180627] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 105.180686] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 105.180744] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 105.180800] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 105.180855] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 105.180909] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 105.180962] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 105.181014] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 105.181066] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 105.181117] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 105.181168] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 105.181219] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 105.182249] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 105.182313] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 105.182390] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 105.182465] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 105.182538] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 105.182609] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 105.182681] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 105.182752] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 105.182823] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 105.182895] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 105.182965] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 105.183036] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 105.183106] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 105.183176] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 105.183246] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<6>[ 105.191258] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 105.194910] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 105.195528] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 105.196686] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<4>[ 105.208738] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 105.208755] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 106.141398] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 106.141433] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 106.141398] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 106.345437] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 108.127996] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 108.128367] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067