<5>[ 0.000000] Linux version 6.12.0-rc1-xe (builder@lgci) (gcc (Ubuntu 13.2.0-23ubuntu4) 13.2.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Mon Sep 30 14:26:50 UTC 2024
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cb59fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cb5a000-0x000000006fed2fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fed3000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001043fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104400000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cc32000 MEMATTR=0x690a7018 ESRT=0x68668498 MOKvar=0x6cd66000
<6>[ 0.000000] efi: Remove mem253: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem255: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3221.D89.2409021714 09/02/2024
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000009] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000012] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000015] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000016] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000328] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000329] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004150] esrt: Reserving ESRT space from 0x0000000068668498 to 0x00000000686685e8.
<7>[ 0.004157] e820: update [mem 0x68668000-0x68668fff] usable ==> reserved
<6>[ 0.004176] Using GB pages for direct mapping
<6>[ 0.004804] printk: log_buf_len: 1048576 bytes
<6>[ 0.004805] printk: early log buf free: 258968(98%)
<6>[ 0.004806] Secure boot disabled
<6>[ 0.004808] ACPI: Early table checksum verification disabled
<6>[ 0.004812] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.004814] ACPI: XSDT 0x000000006FF7D228 00019C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004818] ACPI: FACP 0x000000006FFAC000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.004821] ACPI: DSDT 0x000000006FFB8000 024FCF (v02 INTEL LNL 00000002 01000013)
<6>[ 0.004822] ACPI: FACS 0x000000006FEF1000 000040
<6>[ 0.004824] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.004825] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.004826] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.004828] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.004829] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.004830] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.004832] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.004833] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.004834] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.004835] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.004837] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.004838] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.004840] ACPI: SSDT 0x000000006FFE8000 002460 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.004841] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.004842] ACPI: SSDT 0x000000006FFDE000 008E92 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.004843] ACPI: SSDT 0x000000006FFDD000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.004844] ACPI: SSDT 0x000000006FFB3000 004A7D (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.004846] ACPI: SSDT 0x000000006FFB1000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.004847] ACPI: SSDT 0x000000006FFAD000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.004848] ACPI: HPET 0x000000006FFAB000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004849] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004851] ACPI: APIC 0x000000006FFA9000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.004852] ACPI: MCFG 0x000000006FFA8000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004853] ACPI: SSDT 0x000000006FFA7000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.004854] ACPI: SSDT 0x000000006FFA1000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.004856] ACPI: SSDT 0x000000006FF96000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.004857] ACPI: LPIT 0x000000006FF95000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004858] ACPI: SSDT 0x000000006FF94000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.004859] ACPI: SSDT 0x000000006FF93000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.004861] ACPI: DBGP 0x000000006FF92000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004862] ACPI: DBG2 0x000000006FF91000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004864] ACPI: NHLT 0x000000006FF90000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.004865] ACPI: SSDT 0x000000006FF8E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.004866] ACPI: SSDT 0x000000006FF87000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.004868] ACPI: ECDT 0x000000006FF86000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.004869] ACPI: DMAR 0x000000006FF85000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004870] ACPI: FPDT 0x000000006FF84000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004871] ACPI: SSDT 0x000000006FF83000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.004873] ACPI: SSDT 0x000000006FF81000 001122 (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.004874] ACPI: SSDT 0x000000006FF7E000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.004875] ACPI: SDEV 0x000000006FFAA000 000046 (v01 00000000 00000000)
<6>[ 0.004876] ACPI: SSDT 0x000000006FF72000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.004878] ACPI: SSDT 0x000000006FF64000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.004879] ACPI: ASF! 0x000000006FF63000 000074 (v32 INTEL LNL 00000002 01000013)
<6>[ 0.004880] ACPI: PHAT 0x000000006FF62000 0006E0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.004882] ACPI: BGRT 0x000000006FF61000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.004883] ACPI: Reserving FACP table memory at [mem 0x6ffac000-0x6ffac113]
<6>[ 0.004883] ACPI: Reserving DSDT table memory at [mem 0x6ffb8000-0x6ffdcfce]
<6>[ 0.004884] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f]
<6>[ 0.004884] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.004884] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.004885] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.004885] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.004885] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.004886] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.004886] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.004886] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.004886] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.004887] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.004887] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.004887] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.004888] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea45f]
<6>[ 0.004888] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.004888] ACPI: Reserving SSDT table memory at [mem 0x6ffde000-0x6ffe6e91]
<6>[ 0.004888] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffdd0df]
<6>[ 0.004889] ACPI: Reserving SSDT table memory at [mem 0x6ffb3000-0x6ffb7a7c]
<6>[ 0.004889] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb240e]
<6>[ 0.004889] ACPI: Reserving SSDT table memory at [mem 0x6ffad000-0x6ffb0955]
<6>[ 0.004890] ACPI: Reserving HPET table memory at [mem 0x6ffab000-0x6ffab037]
<6>[ 0.004890] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.004890] ACPI: Reserving APIC table memory at [mem 0x6ffa9000-0x6ffa90d7]
<6>[ 0.004891] ACPI: Reserving MCFG table memory at [mem 0x6ffa8000-0x6ffa803b]
<6>[ 0.004891] ACPI: Reserving SSDT table memory at [mem 0x6ffa7000-0x6ffa76e2]
<6>[ 0.004891] ACPI: Reserving SSDT table memory at [mem 0x6ffa1000-0x6ffa6320]
<6>[ 0.004891] ACPI: Reserving SSDT table memory at [mem 0x6ff96000-0x6ffa0469]
<6>[ 0.004892] ACPI: Reserving LPIT table memory at [mem 0x6ff95000-0x6ff950cb]
<6>[ 0.004892] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff94d5b]
<6>[ 0.004892] ACPI: Reserving SSDT table memory at [mem 0x6ff93000-0x6ff931ef]
<6>[ 0.004893] ACPI: Reserving DBGP table memory at [mem 0x6ff92000-0x6ff92033]
<6>[ 0.004893] ACPI: Reserving DBG2 table memory at [mem 0x6ff91000-0x6ff91053]
<6>[ 0.004893] ACPI: Reserving NHLT table memory at [mem 0x6ff90000-0x6ff902e2]
<6>[ 0.004893] ACPI: Reserving SSDT table memory at [mem 0x6ff8e000-0x6ff8f15b]
<6>[ 0.004894] ACPI: Reserving SSDT table memory at [mem 0x6ff87000-0x6ff8d53a]
<6>[ 0.004894] ACPI: Reserving ECDT table memory at [mem 0x6ff86000-0x6ff86068]
<6>[ 0.004894] ACPI: Reserving DMAR table memory at [mem 0x6ff85000-0x6ff850d7]
<6>[ 0.004895] ACPI: Reserving FPDT table memory at [mem 0x6ff84000-0x6ff84043]
<6>[ 0.004895] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff8386c]
<6>[ 0.004895] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff82121]
<6>[ 0.004896] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff80462]
<6>[ 0.004896] ACPI: Reserving SDEV table memory at [mem 0x6ffaa000-0x6ffaa045]
<6>[ 0.004896] ACPI: Reserving SSDT table memory at [mem 0x6ff72000-0x6ff7c4f9]
<6>[ 0.004897] ACPI: Reserving SSDT table memory at [mem 0x6ff64000-0x6ff71815]
<6>[ 0.004897] ACPI: Reserving ASF! table memory at [mem 0x6ff63000-0x6ff63073]
<6>[ 0.004897] ACPI: Reserving PHAT table memory at [mem 0x6ff62000-0x6ff626df]
<6>[ 0.004897] ACPI: Reserving BGRT table memory at [mem 0x6ff61000-0x6ff61037]
<6>[ 0.004979] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005233] No NUMA configuration found
<6>[ 0.005233] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005239] NODE_DATA(0) allocated [mem 0x87f353100-0x87f37dfff]
<6>[ 0.005350] Zone ranges:
<6>[ 0.005350] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005351] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005352] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005353] Device empty
<6>[ 0.005353] Movable zone start for each node
<6>[ 0.005354] Early memory node ranges
<6>[ 0.005354] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005355] node 0: [mem 0x0000000000100000-0x000000006cb59fff]
<6>[ 0.005355] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005356] node 0: [mem 0x0000000104400000-0x000000087f7fffff]
<6>[ 0.005357] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005361] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005378] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007377] On node 0, zone DMA32: 13477 pages in unavailable ranges
<6>[ 0.035821] On node 0, zone Normal: 17408 pages in unavailable ranges
<6>[ 0.035886] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036568] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036574] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.036625] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.036627] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.036628] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.036630] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.036631] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.036642] e820: update [mem 0x69062000-0x6907cfff] usable ==> reserved
<6>[ 0.036648] TSC deadline timer available
<6>[ 0.036649] CPU topo: Max. logical packages: 1
<6>[ 0.036650] CPU topo: Max. logical dies: 1
<6>[ 0.036650] CPU topo: Max. dies per package: 1
<6>[ 0.036651] CPU topo: Max. threads per core: 1
<6>[ 0.036652] CPU topo: Num. cores per package: 8
<6>[ 0.036652] CPU topo: Num. threads per package: 8
<6>[ 0.036652] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.036665] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.036666] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.036667] PM: hibernation: Registered nosave memory: [mem 0x68668000-0x68668fff]
<6>[ 0.036668] PM: hibernation: Registered nosave memory: [mem 0x69062000-0x6907cfff]
<6>[ 0.036668] PM: hibernation: Registered nosave memory: [mem 0x6cb5a000-0x6fed2fff]
<6>[ 0.036669] PM: hibernation: Registered nosave memory: [mem 0x6fed3000-0x6ff4ffff]
<6>[ 0.036669] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.036670] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.036670] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.036670] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.036671] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.036671] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1043fffff]
<6>[ 0.036672] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.036673] Booting paravirtualized kernel on bare hardware
<6>[ 0.036675] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
<6>[ 0.036683] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037019] percpu: Embedded 69 pages/cpu s245760 r8192 d28672 u524288
<7>[ 0.037023] pcpu-alloc: s245760 r8192 d28672 u524288 alloc=1*2097152
<7>[ 0.037024] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037036] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global drm.debug=0xe modprobe.blacklist=i915,snd_hda_intel,xe ro
<5>[ 0.037108] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037123] random: crng init done
<6>[ 0.038942] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.039843] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.039896] Fallback order for Node 0: 0
<6>[ 0.039899] Built 1 zonelists, mobility grouping on. Total pages: 8290041
<6>[ 0.039900] Policy zone: Normal
<6>[ 0.039909] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
<6>[ 0.039909] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.039911] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.040834] software IO TLB: area num 8.
<4>[ 0.086237] **********************************************************
<4>[ 0.086238] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086238] ** **
<4>[ 0.086238] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086238] ** via the console, logs, and other interfaces. This **
<4>[ 0.086238] ** might reduce the security of your system. **
<4>[ 0.086239] ** **
<4>[ 0.086239] ** If you see this message and you are not debugging **
<4>[ 0.086239] ** the kernel, report this immediately to your system **
<4>[ 0.086239] ** administrator! **
<4>[ 0.086239] ** **
<4>[ 0.086239] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086240] **********************************************************
<6>[ 0.086512] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.086824] ftrace: allocating 58141 entries in 228 pages
<6>[ 0.093534] ftrace: allocated 228 pages with 4 groups
<6>[ 0.094721] Dynamic Preempt: voluntary
<6>[ 0.095139] Running RCU self tests
<6>[ 0.095139] Running RCU synchronous self tests
<6>[ 0.095144] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.095145] rcu: RCU lockdep checking is enabled.
<6>[ 0.095145] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.095146] Trampoline variant of Tasks RCU enabled.
<6>[ 0.095146] Rude variant of Tasks RCU enabled.
<6>[ 0.095146] Tracing variant of Tasks RCU enabled.
<6>[ 0.095146] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
<6>[ 0.095147] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.095184] Running RCU synchronous self tests
<6>[ 0.095187] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.095190] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.095193] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.104786] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.105267] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.105607] Console: colour dummy device 80x25
<6>[ 0.105615] printk: legacy console [tty0] enabled
<4>[ 0.106773] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<4>[ 0.106780] ... MAX_LOCKDEP_SUBCLASSES: 8
<4>[ 0.106784] ... MAX_LOCK_DEPTH: 48
<4>[ 0.106787] ... MAX_LOCKDEP_KEYS: 8192
<4>[ 0.106791] ... CLASSHASH_SIZE: 4096
<4>[ 0.106794] ... MAX_LOCKDEP_ENTRIES: 524288
<4>[ 0.106798] ... MAX_LOCKDEP_CHAINS: 524288
<4>[ 0.106801] ... CHAINHASH_SIZE: 262144
<4>[ 0.106805] memory used by lock dependency info: 54145 kB
<4>[ 0.106809] memory used for stack traces: 4224 kB
<4>[ 0.106813] per task-struct memory footprint: 1920 bytes
<6>[ 0.106859] ACPI: Core revision 20240827
<6>[ 0.107720] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.107802] APIC: Switch to symmetric I/O mode setup
<6>[ 0.107808] DMAR: Host address width 38
<6>[ 0.107812] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.107843] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.107875] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.107897] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.107922] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.108031] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89804f0efda
<6>[ 0.108216] DMAR: SATC flags: 0x1
<6>[ 0.108224] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.108230] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.108234] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.110298] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.115335] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.115354] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=12441600)
<6>[ 0.115427] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.115433] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.115610] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.115615] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.115623] process: using mwait in idle threads
<6>[ 0.115631] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.115639] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.115644] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.115652] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.115658] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.115673] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.115679] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.115684] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.115689] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.115696] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.115703] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.115708] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.115714] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.115719] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.119348] Freeing SMP alternatives memory: 48K
<6>[ 0.119348] pid_max: default: 32768 minimum: 301
<6>[ 0.119348] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.119348] landlock: Up and running.
<6>[ 0.119348] Yama: becoming mindful.
<6>[ 0.119348] AppArmor: AppArmor initialized
<6>[ 0.119348] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.119348] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.119348] Running RCU synchronous self tests
<6>[ 0.119348] Running RCU synchronous self tests
<6>[ 0.119348] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.119348] Running RCU Tasks wait API self tests
<6>[ 0.119348] Running RCU Tasks Rude wait API self tests
<6>[ 0.119348] Running RCU Tasks Trace wait API self tests
<6>[ 0.119348] Performance Events: XSAVE Architectural LBR, no PEBS fmt6+, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.119348] core: cpu_core PMU driver:
<6>[ 0.119348] ... version: 6
<6>[ 0.119348] ... bit width: 48
<6>[ 0.119348] ... generic registers: 10
<6>[ 0.119348] ... value mask: 0000ffffffffffff
<6>[ 0.119348] ... max period: 00007fffffffffff
<6>[ 0.119348] ... fixed-purpose events: 4
<6>[ 0.119348] ... event mask: 0001000f000003ff
<6>[ 0.119348] signal: max sigframe size: 3632
<6>[ 0.119348] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.119348] rcu: Hierarchical SRCU implementation.
<6>[ 0.119348] rcu: Max phase no-delay instances is 1000.
<6>[ 0.119348] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.119348] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.119348] smp: Bringing up secondary CPUs ...
<6>[ 0.119348] smpboot: x86: Booting SMP configuration:
<6>[ 0.119348] .... node #0, CPUs: #1 #2 #3
<3>[ 0.119423] psi: inconsistent task state! task=1:swapper/0 cpu=0 psi_flags=4 clear=0 set=4
<4>[ 0.129174] #4
<6>[ 0.129376] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.139401] #5 #6 #7
<6>[ 0.013880] core: cpu_atom PMU driver:
<6>[ 0.013880] ... version: 6
<6>[ 0.013880] ... bit width: 48
<6>[ 0.013880] ... generic registers: 8
<6>[ 0.013880] ... value mask: 0000ffffffffffff
<6>[ 0.013880] ... max period: 00007fffffffffff
<6>[ 0.013880] ... fixed-purpose events: 6
<6>[ 0.013880] ... event mask: 00000077000000ff
<6>[ 0.163497] smp: Brought up 1 node, 8 CPUs
<6>[ 0.163497] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.168267] Memory: 32364664K/33160164K available (24576K kernel code, 5258K rwdata, 8860K rodata, 5548K init, 68808K bss, 774528K reserved, 0K cma-reserved)
<6>[ 0.168267] devtmpfs: initialized
<6>[ 0.168267] x86/mm: Memory block size: 128MB
<6>[ 0.185406] ACPI: PM: Registering ACPI NVS region [mem 0x6fed3000-0x6ff4ffff] (512000 bytes)
<6>[ 0.185406] Running RCU synchronous self tests
<6>[ 0.185406] Running RCU synchronous self tests
<6>[ 0.185406] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
<6>[ 0.185406] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.185406] pinctrl core: initialized pinctrl subsystem
<6>[ 0.185406] PM: RTC time: 19:28:02, date: 2024-09-30
<6>[ 0.188092] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.189008] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.189288] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.189577] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.189631] audit: initializing netlink subsys (disabled)
<5>[ 0.189673] audit: type=2000 audit(1727724482.072:1): state=initialized audit_enabled=0 res=1
<6>[ 0.189673] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.189673] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.189673] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.189673] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.189673] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.189673] EISA bus registered
<6>[ 0.189673] cpuidle: using governor ladder
<6>[ 0.189673] cpuidle: using governor menu
<6>[ 0.189673] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.191425] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.191450] PCI: Using configuration type 1 for base access
<6>[ 0.191591] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.192152] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.192152] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.192152] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.192152] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.263353] raid6: avx2x4 gen() 82405 MB/s
<6>[ 0.331353] raid6: avx2x2 gen() 90649 MB/s
<6>[ 0.399353] raid6: avx2x1 gen() 78032 MB/s
<6>[ 0.399357] raid6: using algorithm avx2x2 gen() 90649 MB/s
<6>[ 0.467349] raid6: .... xor() 58060 MB/s, rmw enabled
<6>[ 0.467354] raid6: using avx2x2 recovery algorithm
<6>[ 0.470274] fbcon: Taking over console
<6>[ 0.470616] ACPI: Added _OSI(Module Device)
<6>[ 0.470624] ACPI: Added _OSI(Processor Device)
<6>[ 0.470631] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.470637] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.983433] ACPI: 31 ACPI AML tables successfully acquired and loaded
<6>[ 0.996099] ACPI: EC: EC started
<6>[ 0.996110] ACPI: EC: interrupt blocked
<6>[ 0.998453] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.998457] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 1.046450] Callback from call_rcu_tasks() invoked.
<6>[ 1.249649] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.249663] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.277450] ACPI: Interpreter enabled
<6>[ 1.277544] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.277550] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.282330] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.282337] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.300740] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.300792] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.342233] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.342503] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.345616] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.543121] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.550814] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.561641] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.563177] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.571720] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.581236] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.581470] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.581704] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.632965] ACPI: \: Can't tag data node
<3>[ 1.634071] ACPI: \: Can't tag data node
<3>[ 1.635173] ACPI: \: Can't tag data node
<3>[ 1.636183] ACPI: \: Can't tag data node
<3>[ 1.637275] ACPI: \: Can't tag data node
<6>[ 1.737613] ACPI: \_TZ_.FN00: New power resource
<6>[ 1.738116] ACPI: \_TZ_.FN01: New power resource
<6>[ 1.738597] ACPI: \_TZ_.FN02: New power resource
<6>[ 1.739067] ACPI: \_TZ_.FN03: New power resource
<6>[ 1.739543] ACPI: \_TZ_.FN04: New power resource
<6>[ 1.740856] ACPI: \PIN_: New power resource
<6>[ 1.745515] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 1.745531] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 1.748875] acpi PNP0A08:00: _OSC: platform does not support [AER]
<6>[ 1.756713] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME PCIeCapability LTR DPC]
<6>[ 1.766251] PCI host bridge to bus 0000:00
<6>[ 1.766282] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 1.766289] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 1.766295] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 1.766302] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 1.766309] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 1.766317] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 1.770885] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 1.771714] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 1.771893] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 1.772029] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 1.772175] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 1.772236] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 1.773422] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 1.773439] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 1.774557] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 1.774573] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 1.774590] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 1.775385] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 1.775429] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 1.775440] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 1.775457] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 1.775664] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 1.775883] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 1.779966] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 1.780015] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 1.780026] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 1.780043] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 1.780236] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 1.780471] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 1.784932] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 1.784980] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 1.784992] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 1.785009] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 1.785201] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 1.785436] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 1.789410] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 1.789429] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 1.789459] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 1.789652] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 1.789669] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 1.789685] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 1.790078] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 1.790105] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 1.790199] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 1.791678] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 1.791705] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 1.791724] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 1.791802] pci 0000:00:0d.2: supports D1 D2
<6>[ 1.791805] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.792974] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 1.793001] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 1.793019] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 1.793097] pci 0000:00:0d.3: supports D1 D2
<6>[ 1.793101] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 1.794307] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 1.794335] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 1.794435] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 1.796757] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 1.796800] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 1.796945] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 1.797338] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 1.797366] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 1.797466] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 1.799212] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 1.799241] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 1.799261] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 1.800488] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.800552] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.801976] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.802039] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.803388] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.803447] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.804818] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.804877] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 1.806154] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 1.806199] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 1.806358] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 1.808627] pci 0000:00:16.3: [8086:a873] type 00 class 0x070002 conventional PCI endpoint
<6>[ 1.808657] pci 0000:00:16.3: BAR 0 [io 0x3020-0x3027]
<6>[ 1.808674] pci 0000:00:16.3: BAR 1 [mem 0x94321000-0x94321fff]
<6>[ 1.809070] pci 0000:00:1c.0: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 1.809184] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 1.809215] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff]
<6>[ 1.809557] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 1.809723] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 1.815357] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 1.816814] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 1.816865] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 1.816925] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 1.817046] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 1.817417] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 1.817449] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 1.817479] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 1.818586] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 1.818652] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 1.819055] pci 0000:00:1f.6: [8086:550e] type 00 class 0x020000 conventional PCI endpoint
<6>[ 1.819086] pci 0000:00:1f.6: BAR 0 [mem 0x94300000-0x9431ffff]
<6>[ 1.819226] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 1.820710] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 1.820860] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 1.821025] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 1.821438] pci 0000:7f:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 1.821465] pci 0000:7f:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 1.822113] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 1.828170] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.200989] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 12.426747] Low-power S0 idle used by default for system suspend
<6>[ 12.476420] ACPI: EC: interrupt unblocked
<6>[ 12.476431] ACPI: EC: event unblocked
<6>[ 12.476467] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 12.476474] ACPI: EC: GPE=0x6e
<6>[ 12.476479] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 12.476489] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 12.476993] iommu: Default domain type: Translated
<6>[ 12.476993] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 12.476993] SCSI subsystem initialized
<7>[ 12.476993] libata version 3.00 loaded.
<6>[ 12.476993] ACPI: bus type USB registered
<6>[ 12.479400] usbcore: registered new interface driver usbfs
<6>[ 12.479435] usbcore: registered new interface driver hub
<6>[ 12.479479] usbcore: registered new device driver usb
<6>[ 12.479595] pps_core: LinuxPPS API ver. 1 registered
<6>[ 12.479599] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 12.479618] PTP clock support registered
<6>[ 12.479681] EDAC MC: Ver: 3.0.0
<6>[ 12.479997] efivars: Registered efivars operations
<6>[ 12.484902] NetLabel: Initializing
<6>[ 12.484907] NetLabel: domain hash size = 128
<6>[ 12.484911] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 12.484975] NetLabel: unlabeled traffic allowed by default
<6>[ 12.485084] mctp: management component transport protocol core
<6>[ 12.485084] NET: Registered PF_MCTP protocol family
<6>[ 12.485084] PCI: Using ACPI for IRQ routing
<7>[ 12.504949] PCI: pci_cache_line_size set to 64 bytes
<6>[ 12.505225] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 12.505352] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 12.505362] e820: reserve RAM buffer [mem 0x68668000-0x6bffffff]
<7>[ 12.505365] e820: reserve RAM buffer [mem 0x69062000-0x6bffffff]
<7>[ 12.505368] e820: reserve RAM buffer [mem 0x6cb5a000-0x6fffffff]
<7>[ 12.505370] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 12.505564] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 12.505564] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 12.505564] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
<6>[ 12.505564] vgaarb: loaded
<6>[ 12.505564] clocksource: Switched to clocksource tsc-early
<5>[ 12.505564] VFS: Disk quotas dquot_6.6.0
<6>[ 12.505564] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 12.505774] AppArmor: AppArmor Filesystem Enabled
<6>[ 12.505942] pnp: PnP ACPI init
<6>[ 12.506797] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 12.506806] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 12.508118] system 00:02: [io 0x06a4] has been reserved
<6>[ 12.508127] system 00:02: [io 0x06a0] has been reserved
<6>[ 12.530158] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 12.530171] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 12.530180] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 12.530188] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 12.530196] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved
<6>[ 12.530205] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 12.530214] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 12.530221] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 12.532882] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 12.536535] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 12.536676] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 12.540766] pnp: PnP ACPI: found 8 devices
<6>[ 12.571432] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 12.572039] NET: Registered PF_INET protocol family
<6>[ 12.572355] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.578107] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 12.578572] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 12.579012] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.580412] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 12.583533] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 12.584590] MPTCP token hash table entries: 32768 (order: 9, 2883584 bytes, linear)
<6>[ 12.586097] UDP hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 12.587438] UDP-Lite hash table entries: 16384 (order: 9, 2621440 bytes, linear)
<6>[ 12.588681] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 12.588802] NET: Registered PF_XDP protocol family
<6>[ 12.588831] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 12.588859] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 12.588881] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 12.588964] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 12.588982] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 12.588999] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 12.589016] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 12.589186] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 12.589276] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 12.589365] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 12.589454] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 12.589524] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 12.589701] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 12.589723] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 12.589748] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.589777] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 12.589791] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 12.589813] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 12.589833] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.589865] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 12.589880] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 12.589913] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 12.589933] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.589967] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 12.590014] pci 0000:00:1c.0: bridge window [mem 0x94200000-0x942fffff]
<6>[ 12.590078] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 12.590094] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 12.590108] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 12.590124] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 12.590140] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 12.590156] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 12.590169] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 12.590183] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.590201] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 12.590214] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 12.590228] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.590245] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 12.590258] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 12.590272] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.590290] pci_bus 0000:7f: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 12.592784] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 12.596320] PCI: CLS 0 bytes, default 64
<6>[ 12.596471] DMAR: Intel-IOMMU force enabled due to platform opt in
<6>[ 12.596559] DMAR: No RMRR found
<6>[ 12.596584] DMAR: No ATSR found
<6>[ 12.596595] DMAR: IOMMU feature nwfs inconsistent
<6>[ 12.596600] DMAR: IOMMU feature dit inconsistent
<6>[ 12.596619] DMAR: IOMMU feature nest inconsistent
<6>[ 12.596631] DMAR: IOMMU feature sc_support inconsistent
<6>[ 12.596643] DMAR: IOMMU feature dev_iotlb_support inconsistent
<6>[ 12.596657] DMAR: dmar1: Using Queued invalidation
<6>[ 12.596735] DMAR: dmar0: Using Queued invalidation
<6>[ 12.596755] DMAR: dmar2: Using Queued invalidation
<6>[ 12.598438] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 12.598595] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 12.598732] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 12.598860] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 12.600295] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 12.601496] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 12.601786] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 12.602146] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 12.602300] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 12.602493] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 12.602586] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 12.602680] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 12.602830] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 12.602981] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 12.603161] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 12.603260] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 12.603479] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 12.603583] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 12.603682] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 12.603781] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 12.603954] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 12.604062] pci 0000:00:16.3: Adding to iommu group 14
<6>[ 12.604251] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 12.604542] pci 0000:00:1f.0: Adding to iommu group 16
<6>[ 12.604659] pci 0000:00:1f.3: Adding to iommu group 16
<6>[ 12.604763] pci 0000:00:1f.4: Adding to iommu group 16
<6>[ 12.604865] pci 0000:00:1f.5: Adding to iommu group 16
<6>[ 12.604969] pci 0000:00:1f.6: Adding to iommu group 16
<6>[ 12.605160] pci 0000:7f:00.0: Adding to iommu group 17
<6>[ 12.607106] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 12.607122] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 12.607136] software IO TLB: mapped [mem 0x0000000063b5b000-0x0000000067b5b000] (64MB)
<6>[ 12.612245] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 12.612435] clocksource: Switched to clocksource tsc
<6>[ 12.612860] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 12.622299] Initialise system trusted keyrings
<5>[ 12.622427] Key type blacklist registered
<6>[ 12.622930] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 12.631236] zbud: loaded
<6>[ 12.633247] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 12.634190] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 12.634204] ntfs3: Read-only LZX/Xpress compression included
<6>[ 12.634278] fuse: init (API version 7.41)
<5>[ 12.635096] integrity: Platform Keyring initialized
<5>[ 12.635130] integrity: Machine keyring initialized
<6>[ 12.646900] xor: automatically using best checksumming function avx
<5>[ 12.646917] Key type asymmetric registered
<5>[ 12.646937] Asymmetric key parser 'x509' registered
<6>[ 12.647126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 12.647668] io scheduler mq-deadline registered
<6>[ 12.648988] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 12.652180] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 12.652726] pcieport 0000:00:07.0: pciehp: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 12.656998] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 12.657425] pcieport 0000:00:07.1: pciehp: Slot #7 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 12.660955] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 12.661342] pcieport 0000:00:07.2: pciehp: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
<6>[ 12.668495] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 12.669346] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 12.674598] Monitor-Mwait will be used to enter C-1 state
<7>[ 12.674677] Monitor-Mwait will be used to enter C-2 state
<7>[ 12.674728] Monitor-Mwait will be used to enter C-3 state
<6>[ 12.683720] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 12.684019] ACPI: button: Lid Switch [LID0]
<6>[ 12.684419] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 12.684711] ACPI: button: Sleep Button [SLPB]
<6>[ 12.685048] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 12.685875] ACPI: button: Power Button [PWRB]
<6>[ 12.965377] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 12.965484] ACPI: thermal: Thermal Zone [TZ00] (56 C)
<6>[ 12.971440] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 12.971448] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 12.973344] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 12.994676] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 13.009195] serial 0000:00:12.0: enabling device (0000 -> 0002)
<6>[ 13.010951] serial 0000:00:16.3: enabling device (0001 -> 0003)
<6>[ 13.033450] 0000:00:16.3: ttyS4 at I/O 0x3020 (irq = 19, base_baud = 115200) is a 16550A
<4>[ 13.035203] hpet_acpi_add: no address or irqs in _CRS
<6>[ 13.035355] Linux agpgart interface v0.103
<6>[ 13.056635] loop: module loaded
<6>[ 13.069376] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.089983] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.105986] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 13.126084] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<6>[ 13.136110] nvme 0000:7f:00.0: platform quirk: setting simple suspend
<6>[ 13.136963] nvme nvme0: pci function 0000:7f:00.0
<6>[ 13.137439] tun: Universal TUN/TAP device driver, 1.6
<6>[ 13.137751] PPP generic driver version 2.4.2
<6>[ 13.138809] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.138957] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 13.140243] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.142788] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.142823] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 13.142852] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.143350] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 13.143389] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.143406] usb usb1: Product: xHCI Host Controller
<6>[ 13.143418] usb usb1: Manufacturer: Linux 6.12.0-rc1-xe xhci-hcd
<6>[ 13.143432] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 13.145195] hub 1-0:1.0: USB hub found
<6>[ 13.145320] hub 1-0:1.0: 1 port detected
<6>[ 13.151103] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 13.151128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.151145] usb usb2: Product: xHCI Host Controller
<6>[ 13.151157] usb usb2: Manufacturer: Linux 6.12.0-rc1-xe xhci-hcd
<6>[ 13.151171] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 13.152143] hub 2-0:1.0: USB hub found
<6>[ 13.152229] hub 2-0:1.0: 3 ports detected
<6>[ 13.173258] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 13.184245] nvme0n1: p1 p2
<6>[ 13.276422] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.276472] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 13.279223] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.285109] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.285275] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 13.285402] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.286073] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
<6>[ 13.286098] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.286118] usb usb3: Product: xHCI Host Controller
<6>[ 13.286131] usb usb3: Manufacturer: Linux 6.12.0-rc1-xe xhci-hcd
<6>[ 13.286146] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 13.288708] hub 3-0:1.0: USB hub found
<6>[ 13.288814] hub 3-0:1.0: 8 ports detected
<6>[ 13.345010] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
<6>[ 13.345041] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.345059] usb usb4: Product: xHCI Host Controller
<6>[ 13.345071] usb usb4: Manufacturer: Linux 6.12.0-rc1-xe xhci-hcd
<6>[ 13.345086] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 13.346635] hub 4-0:1.0: USB hub found
<6>[ 13.346726] hub 4-0:1.0: 2 ports detected
<6>[ 13.358805] usbcore: registered new interface driver usb-storage
<6>[ 13.359006] usbcore: registered new interface driver usbserial_generic
<6>[ 13.359149] usbserial: USB Serial support registered for generic
<6>[ 13.359242] usbcore: registered new interface driver ftdi_sio
<6>[ 13.359301] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 13.359386] usbcore: registered new interface driver pl2303
<6>[ 13.359441] usbserial: USB Serial support registered for pl2303
<6>[ 13.359692] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 13.359708] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 14.227093] i8042: Can't read CTR while initializing i8042
<3>[ 14.227120] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 14.229097] mousedev: PS/2 mouse device common for all mice
<6>[ 14.230822] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 14.232483] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 14.232706] rtc_cmos rtc_cmos: setting system clock to 2024-09-30T19:28:16 UTC (1727724496)
<6>[ 14.232830] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 14.232859] i2c_dev: i2c /dev entries driver
<6>[ 14.237377] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 14.237394] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 14.237405] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 14.237439] device-mapper: uevent: version 1.0.3
<6>[ 14.237875] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
<6>[ 14.238011] platform eisa.0: Probing EISA bus 0
<4>[ 14.238023] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 14.238038] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 14.238051] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 14.238063] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 14.238075] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 14.238087] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 14.238099] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 14.238111] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 14.238123] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 14.238133] platform eisa.0: EISA: Detected 0 cards
<6>[ 14.238143] intel_pstate: Intel P-state driver initializing
<6>[ 14.242580] Hybrid CPU capacity scaling enabled
<6>[ 14.244457] intel_pstate: HWP enabled
<6>[ 14.244467] sdhci: Secure Digital Host Controller Interface driver
<6>[ 14.244478] sdhci: Copyright(c) Pierre Ossman
<6>[ 14.247818] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 14.248074] efifb: probing for efifb
<6>[ 14.248125] efifb: framebuffer at 0x2000800000, using 20252k, total 20250k
<6>[ 14.248135] efifb: mode is 2880x1800x32, linelength=11520, pages=1
<6>[ 14.248144] efifb: scrolling: redraw
<6>[ 14.248149] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
<6>[ 14.248813] Console: switching to colour frame buffer device 180x56
<6>[ 14.253133] fb0: EFI VGA frame buffer device
<6>[ 14.253498] drop_monitor: Initializing network drop monitor service
<6>[ 14.253770] NET: Registered PF_INET6 protocol family
<6>[ 14.255896] Segment Routing with IPv6
<6>[ 14.256018] In-situ OAM (IOAM) with IPv6
<6>[ 14.256073] NET: Registered PF_PACKET protocol family
<5>[ 14.256242] Key type dns_resolver registered
<4>[ 14.259240] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 14.259919] microcode: Current revision: 0x00000115
<6>[ 14.260618] IPI shorthand broadcast: enabled
<6>[ 14.269265] sched_clock: Marking stable (14256002025, 9880442)->(14306270972, -40388505)
<6>[ 14.270070] registered taskstats version 1
<5>[ 14.271664] Loading compiled-in X.509 certificates
<6>[ 14.287227] Demotion targets for Node 0: null
<6>[ 14.287593] kmemleak: Kernel memory leak detector initialized (mem pool available: 15711)
<6>[ 14.287597] kmemleak: Automatic memory scanning thread started
<5>[ 14.288239] Key type .fscrypt registered
<5>[ 14.288337] Key type fscrypt-provisioning registered
<6>[ 14.290831] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 14.293123] Key type encrypted registered
<6>[ 14.293227] AppArmor: AppArmor sha256 policy hashing enabled
<6>[ 14.293457] ima: No TPM chip found, activating TPM-bypass!
<5>[ 14.293570] Loading compiled-in module X.509 certificates
<5>[ 14.294184] Loaded X.509 cert 'Build time autogenerated kernel key: 2e3c13d1f1ef89245ce02a153746eb9ffae514a3'
<6>[ 14.294316] ima: Allocated hash algorithm: sha1
<6>[ 14.294370] ima: No architecture policies found
<6>[ 14.294480] evm: Initialising EVM extended attributes:
<6>[ 14.294588] evm: security.selinux
<6>[ 14.294607] evm: security.SMACK64
<6>[ 14.294626] evm: security.SMACK64EXEC
<6>[ 14.294646] evm: security.SMACK64TRANSMUTE
<6>[ 14.295682] evm: security.SMACK64MMAP
<6>[ 14.296704] evm: security.apparmor
<6>[ 14.297714] evm: security.ima
<6>[ 14.298717] evm: security.capability
<6>[ 14.299720] evm: HMAC attrs: 0x1
<6>[ 14.302810] PM: Magic number: 8:217:497
<6>[ 14.304139] printk: legacy console [netcon0] enabled
<6>[ 14.305255] netconsole: network logging started
<6>[ 14.307275] RAS: Correctable Errors collector initialized.
<6>[ 14.308526] clk: Disabling unused clocks
<6>[ 14.309916] PM: genpd: Disabling unused power domains
<6>[ 14.311219] md: Waiting for all devices to be available before autodetect
<6>[ 14.312420] md: If you don't use raid, use raid=noautodetect
<6>[ 14.313527] md: Autodetecting RAID arrays.
<6>[ 14.314638] md: autorun ...
<6>[ 14.315722] md: ... autorun DONE.
<6>[ 14.355390] EXT4-fs (nvme0n1p2): mounted filesystem 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f ro with ordered data mode. Quota mode: none.
<6>[ 14.356654] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 14.358750] devtmpfs: mounted
<6>[ 14.371770] Freeing unused decrypted memory: 2036K
<6>[ 14.373796] Freeing unused kernel image (initmem) memory: 5548K
<6>[ 14.376347] Write protecting the kernel read-only data: 34816k
<6>[ 14.378297] Freeing unused kernel image (rodata/data gap) memory: 1380K
<6>[ 14.383344] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 14.384557] Run /sbin/init as init process
<7>[ 14.385676] with arguments:
<7>[ 14.385677] /sbin/init
<7>[ 14.385678] with environment:
<7>[ 14.385678] HOME=/
<7>[ 14.385679] TERM=linux
<7>[ 14.385679] BOOT_IMAGE=/boot/drm_intel
<7>[ 14.426404] systemd[1]: Inserted module 'autofs4'
<7>[ 14.445509] systemd[1]: systemd 255.4-1ubuntu8.4 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 14.449324] systemd[1]: Detected architecture x86-64.
<7>[ 14.456305] systemd[1]: Hostname set to <shard-lnl-2>.
<6>[ 14.482057] usb 3-4: new high-speed USB device number 2 using xhci_hcd
<7>[ 14.622247] systemd[1]: Configuration file /run/systemd/system/systemd-networkd-wait-online.service.d/10-netplan.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<6>[ 14.624721] usb 3-4: New USB device found, idVendor=0424, idProduct=7500, bcdDevice= 1.00
<7>[ 14.626015] systemd[1]: Configuration file /run/systemd/system/netplan-ovs-cleanup.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
<6>[ 14.626361] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 14.630650] usb 3-4: Product: USB Gigabit LAN
<6>[ 14.632086] usb 3-4: Manufacturer: WS
<6>[ 14.633512] usb 3-4: SerialNumber: 000000017b
<7>[ 14.689767] systemd[1]: Queued start job for default target graphical.target.
<7>[ 14.749609] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 14.757141] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 14.761621] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 14.765119] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 14.769116] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 14.772840] systemd[1]: Expecting device dev-disk-by\x2duuid-BB99\x2d8925.device - /dev/disk/by-uuid/BB99-8925...
<7>[ 14.776610] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 14.780382] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 14.784201] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 14.788229] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 14.792178] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 14.796368] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 14.808332] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 14.812797] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 14.817390] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 14.821809] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 14.826250] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 14.830987] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 14.835675] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 14.840231] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 14.844640] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 14.847162] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 14.851820] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 14.878444] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 14.885341] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 14.892043] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 14.898958] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 14.908265] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 14.915547] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 14.922545] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 14.929695] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 14.937053] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 14.940450] systemd-journald[196]: Collecting audit messages is disabled.
<7>[ 14.948442] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 14.956852] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 14.964713] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 14.972297] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 14.980085] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<6>[ 14.987709] pstore: Using crash dump compression: deflate
<7>[ 14.987772] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<6>[ 14.992416] pstore: Registered efi_pstore as persistent store backend
<6>[ 14.996554] ACPI: bus type drm_connector registered
<7>[ 15.000063] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 15.007425] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 15.015172] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 15.020806] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.023154] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.028283] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 15.037401] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.232007] EXT4-fs (nvme0n1p2): re-mounted 54ecf01e-d16e-4105-bf1f-afe53b1d4d6f r/w. Quota mode: none.
<6>[ 15.280595] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:400424960k SS
<7>[ 15.307334] systemd-journald[196]: Received client request to flush runtime journal.
<7>[ 15.323901] systemd-journald[196]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 15.323920] systemd-journald[196]: Rotating system journal.
<6>[ 16.019880] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 16.027271] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.027293] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 16.034418] mc: Linux media interface: v0.10
<6>[ 16.044434] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 16.048865] pci 0000:00:05.0: Setting to D3hot
<6>[ 16.050474] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 16.051878] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 16.054756] videodev: Linux video capture interface: v2.00
<6>[ 16.062570] pci 0000:00:0b.0: Setting to D3hot
<6>[ 16.063618] Consider using thermal netlink events interface
<4>[ 16.076447] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.076846] intel_pmc_core INT33A1:00: initialized
<4>[ 16.112567] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.113495] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 16.178386] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.178419] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 16.250017] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.250039] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<5>[ 16.359220] audit: type=1400 audit(1727724498.623:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=403 comm="apparmor_parser"
<5>[ 16.360615] audit: type=1400 audit(1727724498.623:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=405 comm="apparmor_parser"
<5>[ 16.360944] audit: type=1400 audit(1727724498.623:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=401 comm="apparmor_parser"
<5>[ 16.361547] audit: type=1400 audit(1727724498.623:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=402 comm="apparmor_parser"
<5>[ 16.361982] audit: type=1400 audit(1727724498.627:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=400 comm="apparmor_parser"
<5>[ 16.362312] audit: type=1400 audit(1727724498.627:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=404 comm="apparmor_parser"
<5>[ 16.366207] audit: type=1400 audit(1727724498.631:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=406 comm="apparmor_parser"
<5>[ 16.369581] audit: type=1400 audit(1727724498.631:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=407 comm="apparmor_parser"
<5>[ 16.372462] audit: type=1400 audit(1727724498.635:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=410 comm="apparmor_parser"
<5>[ 16.376190] audit: type=1400 audit(1727724498.639:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=411 comm="apparmor_parser"
<4>[ 16.409340] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.409370] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 16.481087] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.481107] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 16.631850] ACPI: bus type thunderbolt registered
<6>[ 16.638928] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 16.675240] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 16.692588] idma64 idma64.2: Found Intel integrated DMA 64-bit
<4>[ 16.697657] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.697682] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 16.721211] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 16.721216] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 16.723212] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 16.729574] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 16.732846] idma64 idma64.3: Found Intel integrated DMA 64-bit
<4>[ 16.764493] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.764524] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 16.803281] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 16.821719] intel_rapl_common: Found RAPL domain package
<6>[ 16.821724] intel_rapl_common: Found RAPL domain dram
<6>[ 16.848150] smsc75xx v1.0.0
<4>[ 16.866448] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.866521] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 16.930162] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 16.930190] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 16.960262] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 16.992941] smsc75xx 3-4:1.0 eth0: register 'smsc75xx' at usb-0000:00:14.0-4, smsc75xx USB 2.0 Gigabit Ethernet, 80:3f:5d:08:f2:ce
<6>[ 16.999628] usbcore: registered new interface driver smsc75xx
<4>[ 17.053708] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.053758] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.061458] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 17.061462] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 17.061463] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 17.061463] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 17.061464] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 17.100854] cryptd: max_cpu_qlen set to 1000
<4>[ 17.148512] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.148612] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.157580] AES CTR mode by8 optimization enabled
<4>[ 17.230158] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.230188] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.345767] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.409591] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 17.439150] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 17.482213] intel_rapl_common: Found RAPL domain package
<6>[ 17.482219] intel_rapl_common: Found RAPL domain core
<6>[ 17.482222] intel_rapl_common: Found RAPL domain dram
<6>[ 17.482224] intel_rapl_common: Found RAPL domain psys
<6>[ 17.486665] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:34:08
<6>[ 17.486670] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 17.486780] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<4>[ 17.503392] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.503416] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.525459] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.625435] smsc75xx 3-4:1.0 enx803f5d08f2ce: renamed from eth0
<4>[ 17.627917] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.628982] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.701830] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.701860] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 17.705528] evm: overlay not supported
<5>[ 17.753117] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 17.753135] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 17.815090] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<4>[ 17.838637] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.838677] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 17.917479] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 17.917507] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 18.056152] loop0: detected capacity change from 0 to 8
<6>[ 18.438683] hid: raw HID events driver (C) Jiri Kosina
<6>[ 18.445641] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 18.489679] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.490900] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.492227] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.492937] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.494667] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.495257] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.499800] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.502369] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.505532] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.507457] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.509224] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.512602] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<4>[ 18.539082] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.539110] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.612886] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.613486] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.671660] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.671695] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.804090] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.804107] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 18.861242] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 18.861254] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 23.623180] smsc75xx 3-4:1.0 enx803f5d08f2ce: link up, 1000Mbps, full-duplex, lpa 0xC1E1
<6>[ 23.626672] smsc75xx 3-4:1.0 enx803f5d08f2ce: link up, 1000Mbps, full-duplex, lpa 0xC1E1
<6>[ 25.749543] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 25.749579] typec port0: bound usb2-port1 (ops connector_ops)
<4>[ 29.049683] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 29.049697] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<4>[ 29.050106] platform INT3472:01: deferred probe pending: int3472-discrete: Failed to get GPIO
<7>[ 34.204118] systemd-journald[196]: /var/log/journal/2f3359f7a7ee44999e2570762cb4c3cb/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<6>[ 37.477995] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 37.478028] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 105.494277] Console: switching to colour dummy device 80x25
<7>[ 105.494319] [IGT] xe_module_load: executing
<7>[ 105.497606] [IGT] xe_module_load: starting subtest load
<6>[ 105.641805] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 105.643840] xe 0000:00:02.0: [drm] Found LUNARLAKE (device ID 64a0) display version 20.00 stepping B0
<7>[ 105.643856] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG / Xe2_HPG (20.04) media:Xe2_LPM / Xe2_HPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 105.643969] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 105.644053] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 105.651077] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.29.2
<7>[ 105.654078] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x0024efd3
<7>[ 105.654166] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 105.654229] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 105.654292] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7>[ 105.654352] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000004ca
<7>[ 105.654412] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 105.654471] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 105.654531] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 105.654607] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 105.654671] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 105.654736] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 105.654799] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 105.654860] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 105.654912] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 105.654965] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 105.655058] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 105.656172] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 105.656268] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 105.661209] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 105.663914] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 105.664883] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 105.665013] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 105.665149] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000fb
<7>[ 105.665277] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,000000fb
<7>[ 105.665398] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 105.665520] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 105.665636] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 105.666583] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.29.2
<7>[ 105.670450] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00b50fd3
<7>[ 105.670622] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 105.670739] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 105.670834] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000003
<7>[ 105.670926] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x000016ce
<7>[ 105.671019] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 105.671127] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 105.671235] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 105.671339] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 105.671426] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 105.671513] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 105.671598] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 105.671680] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 105.671760] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 105.675319] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 105.677905] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1161
<6>[ 105.678892] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 105.679012] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 105.679160] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 105.680679] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 105.680852] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 105.698600] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 17ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 105.699032] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 105.699190] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 105.699348] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 105.699496] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 105.699637] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 105.699774] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 105.699910] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 105.700070] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018
<7>[ 105.700366] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 105.700573] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 105.700765] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 105.700949] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 105.701141] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 105.701371] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 105.701598] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 105.701850] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 105.702081] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 105.702304] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 105.702559] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 105.702791] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 105.703019] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 105.703224] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 105.703426] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 105.703620] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 105.703806] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 105.703991] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 105.704167] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 105.704367] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 105.704554] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 105.704715] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 105.704878] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 105.705072] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 105.705243] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 105.705390] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 105.705533] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 105.705666] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 105.705797] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 105.705923] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 105.706049] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 105.706167] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 105.706281] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 105.706388] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 105.706497] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 105.706647] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 105.706750] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 105.706859] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 105.707654] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 105.707789] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 105.707932] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 105.708066] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 105.708179] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 105.708286] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 105.708391] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 105.708489] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 105.708584] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 105.708685] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 105.708783] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 105.708876] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 105.708970] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 105.709062] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 105.709150] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 105.709232] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 105.709315] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 105.709402] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 105.709488] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 105.709578] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 105.709663] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 105.709745] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 105.709822] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 105.709894] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 105.709967] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 105.710039] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 105.710108] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 105.710182] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 105.710299] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 105.710455] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 105.710604] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 105.710785] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 105.710960] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 105.711092] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 105.711178] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 105.711264] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 105.711381] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 105.711469] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem
<7>[ 105.711487] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 105.711581] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 105.711667] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 105.711750] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 105.712154] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 105.712310] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 105.712745] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 105.714028] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 105.714139] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 105.714225] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 105.714292] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 105.714359] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 105.714423] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 105.714486] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 105.714567] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 105.716367] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 105.716457] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 105.716539] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 105.716617] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 105.716693] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 105.716766] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x578856c4 (EVT_HTP)
<7>[ 105.716843] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 105.716913] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 105.716982] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 105.717049] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 105.717115] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 105.717180] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 105.717250] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 105.717314] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 105.717376] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 105.717438] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 105.717500] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 105.717562] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 105.717627] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 105.717687] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 105.717749] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 105.717808] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 105.717870] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 105.717934] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 105.722842] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 105.725872] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 105.726012] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 105.726122] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 105.726310] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 105.726475] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 105.726784] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 105.726896] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 105.726997] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 105.727099] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 105.727196] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 105.727286] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 105.727370] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 105.727452] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 105.727535] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 105.727652] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 105.727863] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 105.727960] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 105.728049] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 105.728134] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 105.728218] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 105.728449] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 105.728721] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 105.730132] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<6>[ 105.730224] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.21)
<7>[ 105.730301] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 105.732196] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 105.732820] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 105.733663] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85
<7>[ 105.734619] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 105.735140] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 105.737275] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 105.747189] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 105.747234] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.747236] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.747237] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 105.747259] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.747260] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 105.747279] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.747280] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 105.747297] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.747340] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.747342] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 105.747344] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 105.747353] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 105.747894] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 105.748427] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 105.748529] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 105.748662] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 105.748785] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 105.748949] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios t1_t3 1 t8 1 t9 1 t10 500 t11_t12 6000
<7>[ 105.749045] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 6000
<7>[ 105.749130] xe 0000:00:02.0: [drm:pps_init_delays [xe]] spec t1_t3 2100 t8 500 t9 500 t10 5000 t11_t12 6100
<7>[ 105.749208] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 600
<7>[ 105.749283] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 105.749388] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 105.749602] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 105.749902] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 105.750034] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 105.750440] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 105.751252] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 105.751401] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 105.751661] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 105.751782] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 105.751894] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 105.752338] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 105.752447] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 105.752568] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 105.752663] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 105.752754] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 105.752832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 105.752906] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 105.752975] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 105.753049] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 105.753124] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 105.753198] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 105.753272] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 105.753344] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 105.753418] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 105.753486] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 105.753551] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 105.753614] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 105.753682] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 105.753748] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 105.753813] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 105.753877] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 105.755683] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 105.755869] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 105.755971] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 105.756062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 105.756154] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 105.756244] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 105.756338] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 105.756433] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 105.756509] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 105.756577] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 105.756642] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 105.756706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 105.756776] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 105.756847] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 105.756916] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 105.756983] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 105.757049] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 105.757185] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 105.757267] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 105.757330] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 105.757392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 105.757575] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 105.757642] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 105.757708] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 105.757775] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 105.757839] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 105.757897] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 105.757955] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 105.758042] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 105.758107] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 105.758168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 105.758237] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 105.758308] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 105.758379] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 105.758449] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe B data rate 0 num active planes 0
<7>[ 105.758558] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 105.758632] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 105.758702] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 105.758770] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 105.758838] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 105.758895] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 105.758952] xe 0000:00:02.0: [drm:intel_bw_crtc_update [xe]] pipe C data rate 0 num active planes 0
<7>[ 105.759157] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 105.759254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 105.759342] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 105.759420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 105.759497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 105.759573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 105.759646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 105.759717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 105.759788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 105.759852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 105.759915] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 105.759978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 105.760047] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 105.760113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 105.760179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, vmin: 1906, vmax: 1906, pipeline full: 0, guardband: 105 flipline: 1906, vmin vblank: 1802, vmax vblank: 1801
<7>[ 105.760251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 105.760325] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 105.760401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 105.760478] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 105.760556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 105.760620] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 105.760683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 105.760744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 105.760805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 105.760868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 105.760928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 105.760991] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 105.761052] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 105.761109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 105.761169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 105.761227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 105.761283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 105.761338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 105.761392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 105.761446] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 105.761501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 105.761556] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 105.761614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 105.761678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 105.761748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 105.761971] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 105.762050] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 105.762122] xe 0000:00:02.0: [drm:skl_wm_get_hw_state_and_sanitize [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 105.762360] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] pipe A/plane 1A with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 105.762446] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 105.770976] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 105.806679] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 106.007201] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 106.007204] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 106.007206] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 106.007967] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 106.008057] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 106.008137] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 106.008209] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 106.008276] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 106.008341] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 106.008402] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 106.008464] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 106.008521] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 106.008577] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 106.008633] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 106.008688] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 106.008742] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 106.008796] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 106.008849] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 106.008901] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 106.008954] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 106.009006] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 106.009057] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 106.009107] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 106.009157] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 106.009204] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 106.009250] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 106.009296] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 106.009342] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 106.009390] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 106.009443] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 106.009497] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 106.009551] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 106.009604] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 106.009657] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 106.009708] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 106.009760] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 106.009818] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 106.009876] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 106.009930] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting rcs0 registers
<7>[ 106.009981] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 106.010029] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 106.010077] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 106.010252] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 106.010306] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 106.010356] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 106.010552] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 106.010598] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 106.010642] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 106.011068] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 106.011114] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0308
<7>[ 106.011162] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 106.011213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] Whitelisting ccs0 registers
<7>[ 106.011267] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdafc-0xdaff]: allow read access
<7>[ 106.011318] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb00-0xdb1f]: allow read access
<7>[ 106.011369] xe 0000:00:02.0: [drm:xe_reg_sr_apply_whitelist [xe]] REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 106.011728] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x0024efd3
<7>[ 106.011787] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 106.011842] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000004
<7>[ 106.011894] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000003
<7>[ 106.011945] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000004ca
<7>[ 106.011995] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 106.012046] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 106.012096] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 106.012145] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 106.012191] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 106.012237] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 106.012282] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 106.012327] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 106.012370] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 106.012429] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 106.019546] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 106.021736] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 106.021813] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 106.026552] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[ 106.026686] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000092 [0x49/00]
<7>[ 106.026783] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[ 106.029539] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 106.029905] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 106.030504] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 106.030589] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 106.030670] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 106.030749] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = 0x3ca18000
<7>[ 106.030823] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 106.030895] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 106.030964] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 106.031037] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 106.033441] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 106.033524] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = 0x00000606
<7>[ 106.033604] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 106.036018] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 106.039697] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 106.039701] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 106.039702] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 106.039704] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 106.039705] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 106.039706] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 106.039707] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 106.039708] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 106.039710] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 106.039711] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 106.040512] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 106.040652] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 106.040789] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 106.040924] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 106.041054] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 106.041189] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 106.041314] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 106.041442] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 106.041562] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 106.041677] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 106.041788] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 106.041896] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 106.042001] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 106.042106] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 106.042208] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 106.042310] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 106.042409] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 106.042540] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 106.042644] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 106.042747] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 106.042848] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 106.042949] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 106.043049] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 106.043150] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 106.043276] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 106.043406] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 106.043536] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 106.044545] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 106.044714] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 106.045268] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 106.045409] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 106.046145] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00b50fd3
<7>[ 106.046310] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 106.046480] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000004
<7>[ 106.046626] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000003
<7>[ 106.046773] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x000016ce
<7>[ 106.046917] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 106.047056] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 106.047191] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 106.047323] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 106.047476] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 106.047632] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 106.047760] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 106.047884] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 106.048006] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 106.048194] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 106.059008] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 106.063201] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 106.063324] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 106.082834] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 106.083263] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 106.083923] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 106.085953] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 106.088026] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 106.130603] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 106.132431] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 106.132675] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 106.132952] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 2048) -> ( 0 - 0), size 2048 -> 0
<7>[ 106.133207] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 106.133418] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 106.133680] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 106.133934] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 106.134183] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 106.134427] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 106.134985] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 106.136040] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 106.136300] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 106.146160] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 106.151138] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 106.156431] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 106.157233] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 106.159573] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 106.159717] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 106.160430] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 106.161425] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 106.161497] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 106.161955] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 106.162566] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 106.162653] xe 0000:00:02.0: [drm:drm_sysfs_connector_add [drm]] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 106.163129] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 106.163642] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event [drm]] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 106.163682] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 106.163710] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 106.171318] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 106.174007] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 106.175745] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 106.175873] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 106.177324] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 106.177616] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 106.177711] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 106.177802] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 106.177889] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 106.178089] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<7>[ 106.178937] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 106.179463] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 106.179587] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 106.179690] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 106.180239] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 106.180270] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 106.180272] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.180273] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 106.180302] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.180303] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 106.180330] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.180332] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 106.180358] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.180398] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 106.180500] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 106.181128] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 106.181219] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 106.181682] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:189:eDP-1] status updated from unknown to connected (epoch counter 0->1)
<7>[ 106.181788] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 106.181916] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 106.182013] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 106.182096] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 106.182198] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 106.182285] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 106.182364] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 106.182472] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 106.182573] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 106.182893] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event [drm]] generating hotplug event
<7>[ 106.183153] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 106.183176] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 106.183934] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 106.184417] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 106.184522] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 106.184626] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 106.184806] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 106.184837] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 106.184839] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.184840] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 106.184870] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.184871] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 106.184899] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.184900] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 106.184927] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.184947] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 106.185046] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 106.185690] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 106.185777] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 106.186266] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 106.186268] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 106.186269] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 106.186300] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 106.186316] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 106.186329] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 106.186340] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 106.186491] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 106.186503] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 106.186513] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 106.186629] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 106.186638] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 106.186647] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 106.186758] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 106.186767] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 106.186788] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 106.186808] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 106.186824] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 106.186937] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 106.186966] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 106.186984] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 106.187000] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 106.187017] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 16384x16384 config
<7>[ 106.187043] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 106.187081] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 106.187130] xe 0000:00:02.0: [drm:intelfb_create [xe]] no BIOS fb, allocating a new one
<7>[ 106.193587] xe 0000:00:02.0: [drm:intelfb_create [xe]] allocated 2880x1800 fb: 0x01b66000
<6>[ 106.194298] fbcon: xedrmfb (fb0) is primary device
<7>[ 106.195403] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 106.195516] xe 0000:00:02.0: [drm:intel_dp_compute_config_link_bpp_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 106.195608] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 106.195698] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 106.195781] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 106.195865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 106.195947] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 106.196026] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1801, found 1800)
<7>[ 106.196106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 106.196183] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 106.196259] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 106.196338] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 106.196417] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 106.196495] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 106.196572] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 106.196645] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 106.196716] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 106.196785] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 106.196853] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 106.196919] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 106.196982] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 106.197055] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 106.197118] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 106.197181] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 106.197242] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 106.197301] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 106.197359] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 106.197417] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 106.197473] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 106.197531] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 106.197589] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 106.197658] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 106.197729] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 106.197835] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 106.197916] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level *wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm,*swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 106.197995] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 3, 1 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 106.198091] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 25, 25, 25, 25, 25, 25, 0, 0, 7, 73, 7 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 106.198177] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 106.198258] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 106.198336] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.198409] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.198653] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.198730] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 106.198803] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.198875] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.198945] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199015] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 106.199083] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199150] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199216] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199271] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 106.199326] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199382] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199440] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199498] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 106.199560] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199629] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199694] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 106.199759] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 106.200442] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 106.200563] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 106.200659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 106.200765] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 106.200869] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 106.201288] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 106.201433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 106.201542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 106.201642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 106.201739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 106.201832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 106.201927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 106.202017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 106.202106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 106.202192] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 106.202279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 106.202364] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 106.202463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 106.202553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0
<7>[ 106.202629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 106.202697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 106.202775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 106.202842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 106.202907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 106.202972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 106.203035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 106.203094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1905, vmax: 2859, pipeline full: 0, guardband: 106 flipline: 1906, vmin vblank: 1800, vmax vblank: 2753
<7>[ 106.203155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 106.203215] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 106.203276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 106.203339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 106.203402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 106.203463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 106.203522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 106.203583] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 106.203648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 106.203712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 106.203774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 106.203842] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 106.203912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 106.203984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 106.204053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 106.204122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 106.204189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 106.204252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 106.204312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 106.204371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 106.204428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 106.204481] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 106.204533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 106.204586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:226] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 106.204639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 106.204691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 106.204745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 106.204804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 106.204864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 106.204923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 106.204983] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 106.214665] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<4>[ 106.216081] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 106.216097] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<6>[ 106.234902] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 106.235165] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 106.257829] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 106.422492] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 106.424190] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 106.430609] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 106.430612] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 106.430906] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 106.430927] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 106.431190] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 106.483114] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 106.483385] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 106.510414] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 106.510774] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 106.510866] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 106.512050] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 106.512074] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 106.512311] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 106.512506] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 106.512682] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 106.512851] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 106.513016] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 106.513177] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 106.513333] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 106.513486] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 106.513636] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 106.513786] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 106.513936] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 106.514086] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 106.514235] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 106.514433] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 106.515952] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 106.516171] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle
<7>[ 106.519170] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 106.519386] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 106.519578] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 106.519772] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 106.679526] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 107.122527] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 107.122828] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 107.123078] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 107.123345] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 107.159067] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 107.159422] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 107.159746] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 107.160308] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 107.218712] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 107.218713] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 107.218715] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 107.369201] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 107.371597] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 107.371890] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 107.374112] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 107.375397] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 107.376466] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 107.377566] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 107.378632] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 107.379934] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 107.380178] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 107.382096] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 107.382378] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 107.383078] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 107.383555] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 107.383858] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 107.384209] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 107.386377] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 107.386404] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 107.386680] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 107.400255] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 107.402993] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 107.403388] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 107.404755] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<7>[ 107.407193] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 107.407667] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<6>[ 107.408073] Console: switching to colour frame buffer device 180x56
<6>[ 107.420197] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 107.475404] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 107.475885] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 107.476267] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 107.476604] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 107.476921] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 107.477222] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 107.477514] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 107.477806] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 107.478093] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 107.478419] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 107.478716] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 107.479002] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 107.479283] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 107.479559] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 107.479835] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 107.480108] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 107.480382] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 107.480658] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 107.480938] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 107.481216] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 107.481489] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 107.481762] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 107.483298] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 107.483643] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 107.484039] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 107.485497] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 107.485895] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 107.486280] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 107.489477] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 107.489533] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]]
<7>[ 107.490243] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 107.490309] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 107.490703] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 107.491683] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 107.492684] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 107.493037] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 107.493339] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 107.495548] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 107.495654] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 107.495661] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 107.495666] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 107.495752] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 107.495757] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 107.495837] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 107.495842] xe 0000:00:02.0: [drm:update_display_info.part.0 [drm]] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 107.495920] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 107.496008] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 107.496333] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 107.498433] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 107.498750] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 107.499820] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 107.499829] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 107.499834] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 107.499952] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 107.500010] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 107.500053] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 107.500092] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 107.500487] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 107.500829] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 107.501140] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 107.501521] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 107.501828] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 107.501877] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 107.501921] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 107.502228] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 107.502380] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 107.502398] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 107.502414] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 107.502603] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 107.502741] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 107.502758] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 107.502806] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:198:DP-1] enabled? no
<7>[ 107.502841] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:210:DP-2] enabled? no
<7>[ 107.502874] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:218:DP-3] enabled? no
<7>[ 107.503244] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0 [drm]] Not using firmware configuration
<7>[ 107.503363] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for cmdline mode
<7>[ 107.503433] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] looking for preferred mode, tile 0
<7>[ 107.503501] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CONNECTOR:189:eDP-1] Found mode 2880x1800
<7>[ 107.503568] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] picking CRTCs for 2880x1800 config
<7>[ 107.503680] xe 0000:00:02.0: [drm:drm_client_modeset_probe [drm]] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 107.508601] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 107.508857] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<6>[ 107.509684] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<7>[ 107.517963] xe 0000:00:02.0: [drm:drm_client_dev_hotplug [drm]] intel-fbdev: ret=0
<6>[ 107.518333] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [xe])
<7>[ 107.518671] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 107.518988] xe 0000:00:02.0: [drm:i915_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 107.535513] xe 0000:00:02.0: [drm:drm_client_dev_restore [drm]] intel-fbdev: ret=0
<7>[ 107.535624] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 107.535665] [IGT] xe_module_load: exiting, ret=0
<4>[ 107.538816] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 107.538834] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 107.554183] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 107.554307] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 107.554394] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<4>[ 107.559016] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 107.559030] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 107.559165] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 107.559251] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 107.559316] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 107.559378] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port A
<7>[ 107.559439] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 107.559499] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 107.559558] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 107.559618] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port B
<7>[ 107.559678] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 107.559737] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 107.559795] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 107.559851] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port C
<7>[ 107.559906] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 107.559961] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 107.560016] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 107.560069] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port D
<7>[ 107.560122] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 107.560175] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 107.560227] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 107.560279] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port E
<7>[ 107.560331] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 107.560383] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 107.560434] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 107.560485] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port F
<7>[ 107.560536] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 107.560587] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 107.560637] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 107.560688] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port G
<7>[ 107.560738] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 107.560788] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 107.560838] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 107.560888] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port H
<7>[ 107.560938] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 107.560987] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 107.561036] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<7>[ 107.561085] xe 0000:00:02.0: [drm:i915_audio_component_get_eld [xe]] Not valid for port I
<6>[ 107.567968] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 107.575454] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 107.576172] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 107.576729] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<4>[ 107.589024] int3472-discrete INT3472:01: power-enable \_SB.GPI0 pin number mismatch _DSM 8 resource 32
<4>[ 107.589050] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:00, deferring
<7>[ 108.531236] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 108.531253] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 108.531241] xe 0000:00:02.0: [drm:intel_tc_port_update_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 108.814974] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 110.739710] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 110.740193] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067