Result:
igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0
| Detail | Value |
|---|---|
| Duration | 0.33 seconds |
| Igt-Version |
IGT-Version: 2.4-ge19e6a73e (x86_64) (Linux: 7.0.0-lgci-xe-xe-4897-c8bad7becc008716c-debug+ x86_64) |
| Out |
Using IGT_SRANDOM=1776128081 for randomisation Opened device: /dev/dri/card0 Starting subtest: basic-flip-after-cursor-atomic Using pipe A & eDP-1 Stack trace: #0 ../lib/igt_core.c:2075 __igt_fail_assert() #1 ../lib/igt_kms.c:4966 do_display_commit() #2 ../lib/igt_kms.c:5072 igt_display_commit2() #3 ../tests/kms_cursor_legacy.c:781 basic_flip_cursor() #4 ../tests/kms_cursor_legacy.c:2072 __igt_unique____real_main1862() #5 ../tests/kms_cursor_legacy.c:1862 main() #6 [__libc_init_first+0x8a] #7 [__libc_start_main+0x8b] #8 [_start+0x25] Subtest basic-flip-after-cursor-atomic: FAIL (0.330s) |
| Err |
Starting subtest: basic-flip-after-cursor-atomic (kms_cursor_legacy:1298) igt_kms-CRITICAL: Test assertion failure function do_display_commit, file ../lib/igt_kms.c:4966: (kms_cursor_legacy:1298) igt_kms-CRITICAL: Failed assertion: ret == 0 (kms_cursor_legacy:1298) igt_kms-CRITICAL: Last errno: 22, Invalid argument (kms_cursor_legacy:1298) igt_kms-CRITICAL: error: -22 != 0 Subtest basic-flip-after-cursor-atomic failed. **** DEBUG **** (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.1: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.1: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.1: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.1: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.1: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: B.2, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "COLOR_ENCODING" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "COLOR_RANGE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.2: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: B.3, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "COLOR_ENCODING" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "COLOR_RANGE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.3: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: B.4, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "COLOR_ENCODING" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "COLOR_RANGE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.4: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: B.5, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane B.5: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: Pipe C: Setting property "CTM" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: Pipe C: Setting property "GAMMA_LUT" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: Pipe C: Setting property "DEGAMMA_LUT" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: Pipe C: Setting property "MODE_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: Pipe C: Setting property "ACTIVE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: Pipe C: Setting property "VRR_ENABLED" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: Pipe C: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: C.0, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "COLOR_ENCODING" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "COLOR_RANGE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.0: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: C.1, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "COLOR_ENCODING" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "COLOR_RANGE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.1: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: C.2, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "COLOR_ENCODING" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "COLOR_RANGE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.2: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: C.3, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "COLOR_ENCODING" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "COLOR_RANGE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.3: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: C.4, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "COLOR_ENCODING" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "COLOR_RANGE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "pixel blend mode" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "alpha" to 0xffff/65535 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Setting property "SCALING_FILTER" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.4: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: populating plane data: C.5, fb 0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "SRC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "SRC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "SRC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "SRC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "CRTC_X" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "CRTC_Y" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "CRTC_W" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "CRTC_H" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "FB_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "rotation" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Setting property "FB_DAMAGE_CLIPS" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: plane C.5: Ignoring property "COLOR_PIPELINE" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: eDP-1: preparing atomic, CRTC: A (kms_cursor_legacy:1298) igt_kms-DEBUG: eDP-1: Setting property "CRTC_ID" to 0x97/151 (kms_cursor_legacy:1298) igt_kms-DEBUG: eDP-1: Setting property "Broadcast RGB" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: eDP-1: Setting property "HDR_OUTPUT_METADATA" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: HDMI-A-1: preparing atomic, CRTC: None (kms_cursor_legacy:1298) igt_kms-DEBUG: HDMI-A-1: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: HDMI-A-1: Setting property "Broadcast RGB" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: HDMI-A-1: Setting property "Content Protection" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: HDMI-A-1: Setting property "HDR_OUTPUT_METADATA" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: DP-1: preparing atomic, CRTC: None (kms_cursor_legacy:1298) igt_kms-DEBUG: DP-1: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: DP-1: Setting property "Broadcast RGB" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: DP-1: Setting property "Content Protection" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: DP-1: Setting property "HDR_OUTPUT_METADATA" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: DP-2: preparing atomic, CRTC: None (kms_cursor_legacy:1298) igt_kms-DEBUG: DP-2: Setting property "CRTC_ID" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: DP-2: Setting property "Broadcast RGB" to 0x1/1 (kms_cursor_legacy:1298) igt_kms-DEBUG: DP-2: Setting property "Content Protection" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: DP-2: Setting property "HDR_OUTPUT_METADATA" to 0x0/0 (kms_cursor_legacy:1298) igt_kms-DEBUG: display: } (kms_cursor_legacy:1298) igt_kms-CRITICAL: Test assertion failure function do_display_commit, file ../lib/igt_kms.c:4966: (kms_cursor_legacy:1298) igt_kms-CRITICAL: Failed assertion: ret == 0 (kms_cursor_legacy:1298) igt_kms-CRITICAL: Last errno: 22, Invalid argument (kms_cursor_legacy:1298) igt_kms-CRITICAL: error: -22 != 0 (kms_cursor_legacy:1298) igt_core-INFO: Stack trace: (kms_cursor_legacy:1298) igt_core-INFO: #0 ../lib/igt_core.c:2075 __igt_fail_assert() (kms_cursor_legacy:1298) igt_core-INFO: #1 ../lib/igt_kms.c:4966 do_display_commit() (kms_cursor_legacy:1298) igt_core-INFO: #2 ../lib/igt_kms.c:5072 igt_display_commit2() (kms_cursor_legacy:1298) igt_core-INFO: #3 ../tests/kms_cursor_legacy.c:781 basic_flip_cursor() (kms_cursor_legacy:1298) igt_core-INFO: #4 ../tests/kms_cursor_legacy.c:2072 __igt_unique____real_main1862() (kms_cursor_legacy:1298) igt_core-INFO: #5 ../tests/kms_cursor_legacy.c:1862 main() (kms_cursor_legacy:1298) igt_core-INFO: #6 [__libc_init_first+0x8a] (kms_cursor_legacy:1298) igt_core-INFO: #7 [__libc_start_main+0x8b] (kms_cursor_legacy:1298) igt_core-INFO: #8 [_start+0x25] **** END **** Subtest basic-flip-after-cursor-atomic: FAIL (0.330s) |
| Dmesg |
<6> [830.053711] Console: switching to colour dummy device 80x25
<6> [830.053776] [IGT] kms_cursor_legacy: executing
<7> [830.060769] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [830.060785] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:399:HDMI-A-1]
<7> [830.065000] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [830.065394] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [830.065401] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:408:DP-1]
<7> [830.065595] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [830.065944] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [830.065949] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-2]
<7> [830.066124] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<7> [830.066576] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1]
<7> [830.066582] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:390:eDP-1]
<7> [830.067094] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<7> [830.067464] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [830.067618] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [830.067824] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [830.068088] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 60 Hz
<7> [830.068100] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<7> [830.068105] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD monitor
<7> [830.068111] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:390:eDP-1] ELD size 20, SAD count 0
<7> [830.068151] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:390:eDP-1] VRR capable: yes
<7> [830.068376] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:390:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [830.068581] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:390:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7> [830.069067] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:390:eDP-1] probed modes:
<7> [830.069074] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [830.069097] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1]
<7> [830.069102] xe 0000:00:02.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:399:HDMI-A-1]
<7> [830.073284] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:399:HDMI-A-1] disconnected
<7> [830.073310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1]
<7> [830.073316] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:408:DP-1]
<7> [830.073537] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:408:DP-1] disconnected
<7> [830.073556] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2]
<7> [830.073561] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:417:DP-2]
<7> [830.073770] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:417:DP-2] disconnected
<7> [830.074684] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to f
<7> [830.074896] xe 0000:00:02.0: [drm:intel_psr_debug_set [xe]] Invalid debug mask f
<7> [830.075119] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to 43
<7> [830.076626] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:390:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [830.076941] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:389:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 596200 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [830.077177] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2235750 available 3240000
<7> [830.077423] xe 0000:00:02.0: [drm:intel_psr_compute_config [xe]] Selective update disabled by flag
<7> [830.077623] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [830.077846] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:389:DDI A/PHY A] [CRTC:151:pipe A]
<7> [830.078076] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 0, found 1)
<7> [830.078303] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [830.078520] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [830.078849] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [830.079031] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [830.079214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [830.079448] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [830.079652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [830.079850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [830.080046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [830.080250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [830.080436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [830.080618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5788527, data_n: 8388608, link_m: 385901, link_n: 524288, tu: 64
<7> [830.080800] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [830.080980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [830.081153] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [830.081366] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [830.081539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [830.081705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [830.081862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 2, length 8
<7> [830.082020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [830.082176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [830.082336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [830.082488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [830.082641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [830.082793] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [830.082939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1
<7> [830.083083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 2484, vmax: 2484, flipline: 2484, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [830.083228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 2402, vmax vblank: 2402, vmin vtotal: 2484, vmax vtotal: 2484
<7> [830.084444] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [830.084725] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [830.084891] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [830.085049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa
<7> [830.085207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2400": 60 596199 3840 3888 3920 4000 2400 2403 2408 2484 0x40 0xa
<7> [830.085385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa
<7> [830.085549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pixel rate 596199, min cdclk 298100, min voltage level 1
<7> [830.085710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 54, ips linetime: 0
<7> [830.085864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [830.086015] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 3840x2400+0+0
<7> [830.086169] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [830.086608] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [830.086798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [830.086952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [830.087089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,
<7> [830.087220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,
<7> [830.087372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.
<7> [830.087503] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [830.087629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [830.087755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [830.087881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [830.088005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [830.088126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [830.088260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [830.088381] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [830.088498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [830.088615] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [830.088731] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [830.088847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [830.088959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [830.089071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [830.089182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [830.089304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [830.089414] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [830.089524] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [830.089632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [830.089740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:391] 3840x2400 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [830.089847] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [830.089953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 3840.000000x2400.000000+0.000000+0.000000 dst: 3840x2400+0+0
<7> [830.090058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [830.090163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [830.090272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [830.090375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [830.090476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [830.090744] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [830.090920] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [830.091794] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [830.105048] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [830.105165] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [830.314620] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:390:eDP-1] set backlight PWM = 0
<7> [830.315139] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [830.321777] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 turn panel power off
<7> [830.322118] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [830.322490] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [830.372951] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [830.373331] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [830.374401] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [830.374586] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [830.374663] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:389:DDI A/PHY A] - long
<7> [830.374880] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [830.375186] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [830.375455] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [830.375916] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:389:DDI A/PHY A]
<7> [830.376120] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:398:DDI B/PHY B]
<7> [830.376323] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:407:DDI TC1/PHY TC1]
<7> [830.376535] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:409:DP-MST A]
<7> [830.376737] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST B]
<7> [830.376912] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DP-MST C]
<7> [830.377084] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DDI TC2/PHY TC2]
<7> [830.377266] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST A]
<7> [830.377437] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST B]
<7> [830.377607] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DP-MST C]
<7> [830.377855] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [830.379251] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [830.379534] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [830.381768] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 turn panel power on
<7> [830.381988] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power cycle (492 ms remaining)
<7> [830.882494] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [830.912485] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [830.912799] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power on
<7> [830.913064] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [830.998599] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [830.998954] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:389:DDI A/PHY A] - long
<7> [830.999218] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [830.999654] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [831.114373] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [831.114429] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [831.114507] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [831.114770] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 turning VDD on
<7> [831.115082] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [831.117052] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 41 00 00 01 c0 02 00 02 00 00 0b 80
<7> [831.118375] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [831.119066] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [831.120100] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [831.121194] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [831.122232] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Clock recovery OK
<7> [831.122511] xe 0000:00:02.0: [drm:intel_dp_training_pattern [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] 8.1 Gbps link rate without sink TPS4 support
<7> [831.122808] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [831.124359] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [831.124854] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Link Training passed at link rate = 810000, lane count = 4
<7> [831.125682] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [831.126346] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [831.126689] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [831.127090] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:390:eDP-1] Performing OUI wait (0 ms)
<7> [831.128825] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:390:eDP-1] set backlight PWM = 13818
<7> [831.133274] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 9830400 bytes of contiguous stolen space for FBC, limit: 4
<7> [831.133708] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:35:plane 1A]
<7> [831.143180] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR1
<7> [831.144878] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:390:eDP-1]
<7> [831.145303] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<6> [831.151194] [IGT] kms_cursor_legacy: starting subtest basic-flip-after-cursor-atomic
<7> [831.166309] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [831.166742] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [831.167060] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [831.186528] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:428]
<7> [831.424963] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:429]
<6> [831.481443] [IGT] kms_cursor_legacy: finished subtest basic-flip-after-cursor-atomic, FAIL
<7> [831.481994] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to f
<7> [831.482508] xe 0000:00:02.0: [drm:intel_psr_debug_set [xe]] Invalid debug mask f
<7> [831.483000] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to 44
<7> [831.483986] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:390:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [831.484356] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:389:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 596200 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [831.484637] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2235750 available 3240000
<7> [831.484905] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [831.485160] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:389:DDI A/PHY A] [CRTC:151:pipe A]
<7> [831.485445] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [831.485695] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [831.485938] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [831.486566] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:390:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [831.486832] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:389:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 596200 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [831.487058] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2235750 available 3240000
<7> [831.487342] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [831.487587] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:389:DDI A/PHY A] [CRTC:151:pipe A]
<7> [831.487838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0)
<7> [831.488075] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [831.488326] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [831.488638] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [831.488855] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [831.489079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [831.489354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [831.489605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [831.489853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [831.490098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [831.490360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [831.490605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [831.490849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5788527, data_n: 8388608, link_m: 385901, link_n: 524288, tu: 64
<7> [831.491094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [831.491379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [831.491627] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [831.491856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [831.492084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [831.492330] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [831.492561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [831.492789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [831.493018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [831.493259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [831.493487] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [831.493717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [831.493944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [831.494171] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [831.494413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 2484, vmax: 2484, flipline: 2484, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [831.494644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 2402, vmax vblank: 2402, vmin vtotal: 2484, vmax vtotal: 2484
<7> [831.494862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [831.495077] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [831.495316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [831.495533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa
<7> [831.495750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2400": 60 596199 3840 3888 3920 4000 2400 2403 2408 2484 0x40 0xa
<7> [831.495965] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa
<7> [831.496180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pixel rate 596199, min cdclk 298100, min voltage level 1
<7> [831.496410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 54, ips linetime: 0
<7> [831.496626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [831.496840] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 3840x2400+0+0
<7> [831.497054] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [831.497281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [831.497496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [831.497707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [831.497910] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,
<7> [831.498111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,
<7> [831.498324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.
<7> [831.498528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [831.498728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [831.498929] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [831.499131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [831.499344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [831.499546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [831.499748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [831.499952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [831.500156] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [831.500365] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [831.500560] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [831.500750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [831.500942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [831.501133] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [831.501335] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [831.501526] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [831.501717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [831.501907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [831.502096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [831.502300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:391] 3840x2400 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [831.502496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [831.502687] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 3840.000000x2400.000000+0.000000+0.000000 dst: 3840x2400+0+0
<7> [831.502871] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [831.503051] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [831.503246] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [831.503431] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [831.503613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [831.503876] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [831.504741] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [831.505051] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR1
<7> [831.527333] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [831.527746] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [831.730425] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:390:eDP-1] set backlight PWM = 0
<7> [831.731119] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [831.744641] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 turn panel power off
<7> [831.745096] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [831.745506] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [831.796431] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [831.796874] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [831.797519] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [831.797875] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [831.798227] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [831.798410] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [831.798865] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [831.799319] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:35:plane 1A]
<7> [831.801627] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:389:DDI A/PHY A]
<7> [831.801938] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:398:DDI B/PHY B]
<7> [831.802248] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:407:DDI TC1/PHY TC1]
<7> [831.802529] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:409:DP-MST A]
<7> [831.802798] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:410:DP-MST B]
<7> [831.803060] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:411:DP-MST C]
<7> [831.803348] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DDI TC2/PHY TC2]
<7> [831.803611] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:418:DP-MST A]
<7> [831.803873] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:419:DP-MST B]
<7> [831.804132] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:420:DP-MST C]
<7> [831.804516] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [831.806093] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [831.806529] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [831.808747] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 turn panel power on
<7> [831.809020] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power cycle (488 ms remaining)
<7> [832.306425] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [832.316992] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [832.317476] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 wait for panel power on
<7> [832.317834] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [832.403298] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000008a, pins 0x00000010, long 0x00000010
<7> [832.403660] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [832.404126] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:389:DDI A/PHY A]
<7> [832.521021] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [832.521565] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 turning VDD on
<7> [832.521957] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:389:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [832.524245] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e c4 41 00 00 01 c0 02 00 02 00 00 0b 80
<7> [832.525752] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [832.526591] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [832.527747] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [832.529044] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [832.530220] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Clock recovery OK
<7> [832.530564] xe 0000:00:02.0: [drm:intel_dp_training_pattern [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] 8.1 Gbps link rate without sink TPS4 support
<7> [832.530884] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Using DP training pattern TPS3
<7> [832.532370] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [832.532689] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:390:eDP-1][ENCODER:389:DDI A/PHY A][DPRX] Link Training passed at link rate = 810000, lane count = 4
<7> [832.533398] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [832.533912] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [832.534324] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [832.534773] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:390:eDP-1] Performing OUI wait (0 ms)
<7> [832.535445] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:390:eDP-1] set backlight PWM = 13818
<7> [832.550918] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [832.552979] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:390:eDP-1]
<7> [832.553452] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [832.584491] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [832.585571] [IGT] kms_cursor_legacy: exiting, ret=98
<7> [832.586503] xe 0000:00:02.0: [drm:i915_edp_psr_debug_set [xe]] Setting PSR debug to 0
<7> [832.587188] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:390:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [832.587665] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:389:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 596200 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [832.588059] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2235750 available 3240000
<7> [832.588519] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [832.588921] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:389:DDI A/PHY A] [CRTC:151:pipe A]
<7> [832.589450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [fastset]
<7> [832.589852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [832.590262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [832.590652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [832.591038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [832.591545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [832.591933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [832.592336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 5788527, data_n: 8388608, link_m: 385901, link_n: 524288, tu: 64
<7> [832.592698] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [832.593050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: enabled
<7> [832.593548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [832.593893] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [832.594254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [832.594593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [832.594936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [832.595318] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [832.595660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [832.595984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [832.596327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [832.596652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [832.596976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [832.597313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [832.597637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 2484, vmax: 2484, flipline: 2484, pipeline full: 0, guardband: 82 vsync start: 81, vsync end: 76
<7> [832.597963] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 2402, vmax vblank: 2402, vmin vtotal: 2484, vmax vtotal: 2484
<7> [832.598301] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [832.598626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [832.598952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "3840x2400": 60 596200 3840 3888 3920 4000 2400 2403 2408 2484 0x48 0xa
<7> [832.599292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa
<7> [832.599607] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "3840x2400": 60 596199 3840 3888 3920 4000 2400 2403 2408 2484 0x40 0xa
<7> [832.599905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=596199, hd=3840 hb=3840-4000 hs=3888-3920 ht=4000, vd=2400 vb=2402-2484 vs=2403-2408 vt=2484, flags=0xa
<7> [832.600216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pixel rate 596199, min cdclk 298100, min voltage level 1
<7> [832.600513] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 54, ips linetime: 0
<7> [832.600808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 1, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [832.601104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 3840x2400+0+0
<7> [832.601427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [832.601726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [832.602022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [832.602345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [832.602423] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [832.602643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,
<7> [832.602847] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [832.602939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,
<7> [832.603241] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [832.603249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.
<7> [832.603550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [832.603844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [832.604138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [832.604450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [832.604744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [832.605040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [832.605351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [832.605648] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [832.605944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [832.606251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [832.606538] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [832.606809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [832.607080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [832.607366] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [832.607639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [832.607913] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [832.608200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [832.608473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [832.608746] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [832.609018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:391] 3840x2400 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [832.609309] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [832.609584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 3840.000000x2400.000000+0.000000+0.000000 dst: 3840x2400+0+0
<7> [832.609928] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [832.610247] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [832.617766] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:390:eDP-1]
<7> [832.618232] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<6> [832.634694] Console: switching to colour frame buffer device 240x75
<7> [832.668293] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [832.668719] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [832.669035] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
|