Results for igt@kms_setmode@basic@pipe-b-edp-1

Result: Fail

i915_display_info9 igt_runner9 results9.json results9-xe-load.json guc_logs9.tar i915_display_info_post_exec9 boot9 dmesg9

DetailValue
Duration 4.78 seconds
Hostname
shard-lnl-5
Igt-Version
IGT-Version: 2.4-g75c0acd70 (x86_64) (Linux: 7.0.0-lgci-xe-xe-4897-c8bad7becc008716c-debug+ x86_64)
Out
Starting dynamic subtest: pipe-B-eDP-1
  Test id#2 CRTC count 1
    CRTC[270] [Pipe B] Mode: 2880x1800@60Hz Connectors: eDP-1[393]
Expected frametime: 16664us; measured 16512.2us +- 13.448us accuracy 0.02% [0.42 scanlines]
vblank interval differs from modeline! expected 16664.0us, measured 16512us +- 13.448us, difference 151.8us (11.3 sigma, 17.4 scanlines)
Timing check failed on attempt 1, retrying...
Expected frametime: 16664us; measured 16545.8us +- 10.273us accuracy 0.02% [0.32 scanlines]
vblank interval differs from modeline! expected 16664.0us, measured 16546us +- 10.273us, difference 118.2us (11.5 sigma, 13.5 scanlines)
Timing check failed on attempt 2, retrying...
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 ../tests/kms_setmode.c:533 test_one_combination()
  #2 ../tests/kms_setmode.c:976 __igt_unique____real_main1031()
  #3 ../tests/kms_setmode.c:1031 main()
  #4 [__libc_init_first+0x8a]
  #5 [__libc_start_main+0x8b]
  #6 [_start+0x25]
Dynamic subtest pipe-B-eDP-1: FAIL (4.776s)
Testing: basic 2 connector combinations
Subtest basic: FAIL (10.683s)
Err
Starting dynamic subtest: pipe-B-eDP-1
(kms_setmode:2613) CRITICAL: Test assertion failure function test_crtc_config, file ../tests/kms_setmode.c:698:
(kms_setmode:2613) CRITICAL: Failed assertion: status
(kms_setmode:2613) CRITICAL: VBlank timing test failed after 2 attempt(s)
Dynamic subtest pipe-B-eDP-1 failed.
**** DEBUG ****
(kms_setmode:2613) INFO:   Test id#2 CRTC count 1
(kms_setmode:2613) INFO:     CRTC[270] [Pipe B] Mode: 2880x1800@60Hz Connectors: eDP-1[393]
(kms_setmode:2613) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=2880, height=1800, format=XR24(0x34325258), modifier=0x0, size=0)
(kms_setmode:2613) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=3, pitch=11520)
(kms_setmode:2613) ioctl_wrappers-DEBUG: Test requirement passed: igt_has_fb_modifiers(fd)
(kms_setmode:2613) intel_allocator_simple-DEBUG: Using simple allocator
(kms_setmode:2613) intel_allocator_simple-DEBUG: <ial: 0x5f0d096237c0, fd: 5> objects: 3, reserved_areas: 0
(kms_setmode:2613) intel_allocator_simple-DEBUG: <ial: 0x5f0d096237c0, fd: 5> objects: 3, reserved_areas: 0
(kms_setmode:2613) intel_allocator_simple-DEBUG: Using simple allocator
(kms_setmode:2613) intel_allocator_simple-DEBUG: <ial: 0x5f0d0963b450, fd: 5> objects: 3, reserved_areas: 0
(kms_setmode:2613) intel_allocator_simple-DEBUG: <ial: 0x5f0d0963b450, fd: 5> objects: 3, reserved_areas: 0
(kms_setmode:2613) intel_allocator_simple-DEBUG: Using simple allocator
(kms_setmode:2613) intel_allocator_simple-DEBUG: <ial: 0x5f0d096237c0, fd: 5> objects: 3, reserved_areas: 0
(kms_setmode:2613) intel_allocator_simple-DEBUG: <ial: 0x5f0d096237c0, fd: 5> objects: 3, reserved_areas: 0
(kms_setmode:2613) intel_allocator_simple-DEBUG: Using simple allocator
(kms_setmode:2613) intel_allocator_simple-DEBUG: <ial: 0x5f0d096237c0, fd: 5> objects: 3, reserved_areas: 0
(kms_setmode:2613) intel_allocator_simple-DEBUG: <ial: 0x5f0d096237c0, fd: 5> objects: 3, reserved_areas: 0
(kms_setmode:2613) i915/intel_drrs-DEBUG: Manually disabling DRRS. 0
(kms_setmode:2613) i915/intel_drrs-DEBUG: Test requirement passed: dir >= 0
(kms_setmode:2613) INFO: Expected frametime: 16664us; measured 16512.2us +- 13.448us accuracy 0.02% [0.42 scanlines]
(kms_setmode:2613) INFO: vblank interval differs from modeline! expected 16664.0us, measured 16512us +- 13.448us, difference 151.8us (11.3 sigma, 17.4 scanlines)
(kms_setmode:2613) INFO: Timing check failed on attempt 1, retrying...
(kms_setmode:2613) INFO: Expected frametime: 16664us; measured 16545.8us +- 10.273us accuracy 0.02% [0.32 scanlines]
(kms_setmode:2613) INFO: vblank interval differs from modeline! expected 16664.0us, measured 16546us +- 10.273us, difference 118.2us (11.5 sigma, 13.5 scanlines)
(kms_setmode:2613) INFO: Timing check failed on attempt 2, retrying...
(kms_setmode:2613) CRITICAL: Test assertion failure function test_crtc_config, file ../tests/kms_setmode.c:698:
(kms_setmode:2613) CRITICAL: Failed assertion: status
(kms_setmode:2613) CRITICAL: VBlank timing test failed after 2 attempt(s)
(kms_setmode:2613) igt_core-INFO: Stack trace:
(kms_setmode:2613) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_setmode:2613) igt_core-INFO:   #1 ../tests/kms_setmode.c:533 test_one_combination()
(kms_setmode:2613) igt_core-INFO:   #2 ../tests/kms_setmode.c:976 __igt_unique____real_main1031()
(kms_setmode:2613) igt_core-INFO:   #3 ../tests/kms_setmode.c:1031 main()
(kms_setmode:2613) igt_core-INFO:   #4 [__libc_init_first+0x8a]
(kms_setmode:2613) igt_core-INFO:   #5 [__libc_start_main+0x8b]
(kms_setmode:2613) igt_core-INFO:   #6 [_start+0x25]
****  END  ****
Dynamic subtest pipe-B-eDP-1: FAIL (4.776s)
Subtest basic: FAIL (10.683s)
Dmesg
<6> [116.272184] [IGT] kms_setmode: starting dynamic subtest pipe-B-eDP-1
<7> [116.272834] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [116.332043] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:270:pipe B]
<7> [116.332093] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CONNECTOR:393:eDP-1]
<7> [116.332210] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [116.332407] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:270:pipe B] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [116.332505] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [116.332610] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [116.332705] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:270:pipe B]
<7> [116.332798] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected no, found yes)
<7> [116.332889] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected no, found yes)
<7> [116.333017] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected -1, found 1)
<7> [116.333136] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 0, found 4)
<7> [116.333247] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [116.333344] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [116.333433] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [116.333519] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [116.333606] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [116.333693] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [116.333779] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [116.333864] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [116.333964] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [116.334073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [116.334181] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [116.334277] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [116.334356] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [116.334434] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [116.334512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [116.334589] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [116.334666] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [116.334742] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [116.334818] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [116.334893] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [116.335026] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [116.335124] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [116.335221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [116.335309] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [116.335383] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [116.335458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [116.335531] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [116.335605] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [116.335678] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [116.335751] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [116.335825] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dpll_hw_state
<7> [116.335898] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [116.335990] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 0, ssc_enabled: no, use_c10: no, tbt_mode: no
<7> [116.336090] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c20pll_hw_state:
<7> [116.336190] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx[0] = 0x0000, tx[1] = 0x0000, tx[2] = 0x0000
<7> [116.336283] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cmn[0] = 0x0000, cmn[1] = 0x0000, cmn[2] = 0x0000, cmn[3] = 0x0000
<7> [116.336360] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[0] = 0x0000
<7> [116.336436] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[1] = 0x0000
<7> [116.336510] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[2] = 0x0000
<7> [116.336583] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[3] = 0x0000
<7> [116.336656] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[4] = 0x0000
<7> [116.336729] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[5] = 0x0000
<7> [116.336802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[6] = 0x0000
<7> [116.336875] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[7] = 0x0000
<7> [116.336948] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[8] = 0x0000
<7> [116.337051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mplla[9] = 0x0000
<7> [116.337146] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] mpllb[10] = 0x0000
<7> [116.337252] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] vdr: custom width: 0x00, serdes rate: 0x00, hdmi rate: 0x00
<7> [116.337360] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [116.337443] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [116.337520] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [116.337591] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [116.337663] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [116.337734] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [116.337805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [116.337877] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [116.337948] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [116.338049] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [116.338147] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [116.338245] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [116.338333] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [116.338411] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [116.338485] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [116.338563] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset
<7> [116.338689] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [116.338758] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x2
<7> [116.338853] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [116.338921] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [116.338998] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [116.339074] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [116.339147] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [116.339220] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [116.339312] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 1390840 num active planes 1
<7> [116.339396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [116.339479] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [116.339562] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [116.339643] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [116.339724] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [116.339805] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 0 kHz -> 173855 kHz
<7> [116.339904] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [116.339991] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [116.340125] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [116.340256] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:270:pipe B] allocated DPLL 0
<7> [116.340359] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:270:pipe B] reserving DPLL 0
<7> [116.340451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: yes [modeset]
<7> [116.340532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [116.340612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: B, pipe bpp: 30, dithering: 0
<7> [116.340690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [116.340768] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [116.340846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [116.340922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [116.341000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [116.341173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [116.341274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [116.341370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [116.341450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [116.341525] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [116.341601] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [116.341678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [116.341753] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [116.341829] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [116.341905] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [116.341980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [116.342084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [116.342187] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [116.342287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [116.342387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [116.342465] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [116.342540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [116.342615] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [116.342690] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [116.342764] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [116.342839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [116.342914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [116.342988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [116.343087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [116.343193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [116.343287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [116.343372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [116.343447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [116.343519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [116.343592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [116.343663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [116.343735] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [116.343807] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [116.343879] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [116.343951] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [116.344030] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [116.344148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [116.344254] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [116.344346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [116.344426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [116.344500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [116.344571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [116.344642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.344713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.344787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.344862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [116.344936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [116.345010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.345105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.345200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [116.345294] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [116.345382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [FB:432] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [116.345459] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [116.345532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [116.345605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no
<7> [116.345678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no
<7> [116.345750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no
<7> [116.345823] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no
<7> [116.345894] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no
<7> [116.348723] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [116.348819] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [116.349056] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [116.349283] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [116.349464] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [116.349658] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa2000000)
<7> [116.349780] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [116.349887] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [116.349983] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [116.350074] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [116.350216] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [116.350305] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [116.350383] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [116.350459] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [116.350534] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [116.350602] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [116.350670] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [116.350738] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [116.350806] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [116.350874] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [116.350940] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [116.351007] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [116.351098] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [116.351287] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [116.351360] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [116.351474] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [116.352815] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x2, on? 0) for [CRTC:270:pipe B]
<7> [116.352913] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [116.354919] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [116.355001] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (359 ms remaining)
<7> [116.726474] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [116.763285] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [116.763690] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [116.764147] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [116.800417] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [116.800894] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [116.801373] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [116.801973] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [116.975278] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [116.975733] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [116.976183] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [116.978320] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [116.979973] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [116.981023] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [116.982343] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [116.983924] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [116.985309] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [116.985800] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [116.987491] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [116.987943] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [116.988887] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe B
<7> [116.989540] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [116.989949] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe B
<7> [116.990549] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892
<7> [117.006458] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [117.008441] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [117.008986] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]
<7> [117.030621] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [117.031253] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [117.031839] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [119.535772] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off
<7> [119.536111] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<6> [121.049092] [IGT] kms_setmode: finished subtest pipe-B-eDP-1, FAIL
<7> [121.049491] xe 0000:00:02.0: [drm:drm_mode_rmfb_work_fn] Removing [FB:432] from all active usage due to RMFB ioctl
<7> [121.049604] xe 0000:00:02.0: [drm:atomic_remove_fb] Disabling [PLANE:154:plane 1B] because [FB:432] is removed
<7> [121.049709] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:154:plane 1B] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [121.050060] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [121.050299] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [121.050527] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [121.050771] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:154:plane 1B] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [121.051051] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:270:pipe B] data rate 0 num active planes 0
<7> [121.051341] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [121.051621] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [121.051876] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [121.052154] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [121.052389] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [121.053034] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [121.053260] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [121.053531] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [121.055830] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [121.056099] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [121.073042] xe 0000:00:02.0: [drm:drm_mode_setcrtc] [CRTC:270:pipe B]
<7> [121.073399] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.enable (expected yes, found no)
<7> [121.073905] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.active (expected yes, found no)
<7> [121.074418] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in cpu_transcoder (expected 1, found -1)
<7> [121.074833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in lane_count (expected 4, found 0)
<7> [121.075259] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 0, data 0/0 link 0/0)
<7> [121.075676] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [121.076023] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [121.076393] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [121.076769] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [121.077121] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [121.077407] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [121.077719] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [121.077989] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [121.078275] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [121.078560] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [121.078805] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [121.079049] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [121.079334] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [121.079644] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [121.079904] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [121.080176] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [121.080458] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [121.080737] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [121.081015] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [121.081327] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [121.081613] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [121.081891] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [121.082189] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [121.082462] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [121.082736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [121.082988] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [121.083309] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [121.083557] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [121.083802] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [121.084073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [121.084380] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 0)
<7> [121.084597] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 0)
<7> [121.084806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:270:pipe B] fastset requirement not met in port_clock (expected 432000, found 0)
<7> [121.085010] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:270:pipe B] fastset requirement not met, forcing full modeset
<7> [121.085219] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:270:pipe B] releasing DPLL 0
<7> [121.085482] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [121.085667] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:270:pipe B] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x2 -> 0x0
<7> [121.085871] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:264:cursor B] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [121.086049] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:270:pipe B] min cdclk: 173855 kHz -> 0 kHz
<7> [121.086274] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [121.086469] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [121.086662] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [121.086906] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:270:pipe B] enable: no [modeset]
<7> [121.087117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:154:plane 1B] fb: [NOFB], visible: no
<7> [121.087305] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:184:plane 2B] fb: [NOFB], visible: no
<7> [121.087469] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:214:plane 3B] fb: [NOFB], visible: no
<7> [121.087632] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:244:plane 4B] fb: [NOFB], visible: no
<7> [121.087789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:254:plane 5B] fb: [NOFB], visible: no
<7> [121.087935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:264:cursor B] fb: [NOFB], visible: no
<7> [121.088263] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [121.088437] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [121.291604] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [121.292283] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe B
<7> [121.307058] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [121.307614] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [121.307548] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [121.308078] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [121.308139] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [121.359190] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [121.359599] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x2, on? 1) for [CRTC:270:pipe B]
<7> [121.359658] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [121.360104] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [121.360559] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [121.361050] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [121.361164] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [121.361717] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [121.362348] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [121.362756] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [121.363186] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [121.363607] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [121.364025] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [121.364371] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [121.364702] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [121.365098] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [121.365501] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [121.365830] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [121.366215] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [121.366565] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [121.366903] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [121.367230] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [121.367652] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [121.368001] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [121.368368] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [121.368971] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [121.369411] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [121.369879] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [121.370438] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:270:pipe B]
<7> [121.370792] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [121.371211] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [121.371525] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [121.373429] [IGT] kms_setmode: finished subtest basic, FAIL
<7> [121.379884] xe 0000:00:02.0: [drm:compute_baseline_pipe_bpp [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [121.380197] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [121.380420] xe 0000:00:02.0: [drm:intel_dp_compute_output_format [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [121.380653] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [121.380865] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [121.381103] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [121.381306] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [121.381498] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [121.381680] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [121.381880] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [121.382072] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [121.382237] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [121.382396] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [121.382553] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [121.382723] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [121.382888] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [121.383088] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [121.383221] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [121.383349] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [121.383476] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [121.383602] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [121.383725] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [121.383843] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [121.383958] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [121.384090] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [121.384199] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [121.384306] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [121.384411] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [121.384515] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [121.384633] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [121.384747] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [121.384855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [121.384961] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [121.385249] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [121.385347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [121.385441] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [121.385534] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [121.385636] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [121.385738] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [121.385838] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [121.385924] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [121.386012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [121.386094] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [121.386188] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [121.386347] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [121.386421] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [121.386483] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [121.386545] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [121.386602] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [121.386659] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [121.386717] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [121.386771] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [121.386848] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1
<7> [121.386944] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [121.387194] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [121.387284] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [121.387365] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [121.387445] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [121.387526] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [121.387632] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [121.387714] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [121.387793] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [121.387897] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [121.387985] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [121.388088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [121.388176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [121.388259] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [121.388339] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [121.388418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [121.388497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [121.388575] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [121.388652] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [121.388729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [121.388805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [121.388880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [121.388956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [121.389037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum hblank: 0
<7> [121.389115] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [121.389191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [121.389267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [121.389342] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [121.389417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [121.389491] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [121.389564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [121.389639] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [121.389712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [121.389786] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [121.389859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [121.389939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [121.390012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [121.390114] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [121.390143] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [121.390197] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [121.390276] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [121.390282] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [121.390349] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [121.390377] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [121.390423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pixel rate 347710, min cdclk 173855, min voltage level 0
<7> [121.390497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [121.390500] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [121.390569] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0, sharpness_strength: 0
<7> [121.390646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe src: 2880x1800+0+0
<7> [121.390728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [121.390805] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [121.390885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [121.390964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [121.391049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [121.391128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [121.391213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [121.391310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [121.391394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [121.391475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [121.391548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [121.391621] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [121.391694] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [121.391767] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [121.391839] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [121.391911] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [121.391984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [121.392069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [121.392144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [121.392225] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [121.392306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [121.392378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [121.392450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [121.392522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [121.392593] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [121.392663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [121.392736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [121.392806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [121.392877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [121.392948] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [121.393019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [121.393105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [121.393184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [121.393345] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [121.393453] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [121.393687] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [121.393819] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [121.393946] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [121.394061] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [121.394167] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [121.394264] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [121.394349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [121.394420] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [121.394490] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [121.394556] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [121.394620] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [121.394686] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [121.394752] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [121.394819] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [121.394885] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [121.394950] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [121.395015] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [121.395094] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [121.395162] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [121.395251] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [121.395416] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [121.395485] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [121.395594] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [121.397027] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [121.397179] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [121.397197] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [121.397272] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [121.397354] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [121.397455] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [121.399325] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [121.399419] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (461 ms remaining)
<7> [121.871235] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [121.929525] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [121.929913] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [121.930295] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [121.966730] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [121.967127] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [121.967453] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [121.967857] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [122.139298] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [122.139999] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [122.140456] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [122.143783] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [122.145575] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [122.146620] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [122.147979] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [122.149550] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [122.150817] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [122.151301] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [122.153019] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [122.153498] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [122.154849] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [122.155604] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [122.156086] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [122.156677] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 13892
<7> [122.172547] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [122.175043] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [122.175620] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [122.179028] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [122.179613] [IGT] kms_setmode: exiting, ret=98
<6> [122.189405] Console: switching to colour frame buffer device 180x56
Created at 2026-04-14 01:05:33