Results for igt@kms_vrr@max-min@pipe-a-edp-1

Result: Fail

i915_display_info15 igt_runner15 results15.json results15-xe-load.json guc_logs15.tar i915_display_info_post_exec15 boot15 dmesg15

DetailValue
Duration 6.54 seconds
Hostname 
shard-lnl-4
Igt-Version 
IGT-Version: 2.3-g88eca2563 (x86_64) (Linux: 7.0.0-rc5-lgci-xe-xe-4764-a5c5cfbd8c7054ac6-debug+ x86_64)
Out 
Using IGT_SRANDOM=1774315513 for randomisation
Opened device: /dev/dri/card0
Starting subtest: max-min
Default Mode:   2880x1800: 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa 
Starting dynamic subtest: pipe-A-eDP-1
VRR Test execution on eDP-1, PIPE_A with VRR range: (40-120) Hz
Override Mode:   2880x1800: 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa 
Requested rate[0]: 12500000 ns (80.00 Hz), Expected rate between: 12345679 ns (81.00 Hz) to 12658228 ns (79.00 Hz)
Completed 21 flips, 16 were in threshold for [(80 Hz) 12500000ns]
Requested rate[0]: 8333333 ns (120.00 Hz), Expected rate between: 8264462 ns (121.00 Hz) to 8403361 ns (119.00 Hz)
Requested rate[1]: 23809523 ns (42.00 Hz), Expected rate between: 23255814 ns (43.00 Hz) to 24390244 ns (41.00 Hz)
Completed 312 flips, 231 were in threshold for [(120 Hz) 8333333ns,(42 Hz) 23809523ns]
Stack trace:
  #0 ../lib/igt_core.c:2075 __igt_fail_assert()
  #1 ../tests/kms_vrr.c:746 test_basic()
  #2 ../tests/kms_vrr.c:1119 run_vrr_test.constprop.0()
  #3 ../tests/kms_vrr.c:1205 __igt_unique____real_main1167()
  #4 ../tests/kms_vrr.c:1167 main()
  #5 [__libc_init_first+0x8a]
  #6 [__libc_start_main+0x8b]
  #7 [_start+0x25]
Dynamic subtest pipe-A-eDP-1: FAIL (6.541s)
Subtest max-min: FAIL (6.855s)
Err 
Starting subtest: max-min
Starting dynamic subtest: pipe-A-eDP-1
(kms_vrr:3222) CRITICAL: Test assertion failure function test_basic, file ../tests/kms_vrr.c:746:
(kms_vrr:3222) CRITICAL: Failed assertion: result > 75
(kms_vrr:3222) CRITICAL: Refresh rates (120/42 Hz) 8333333ns/23809523ns: Target VRR on threshold not reached, result was 74%
Dynamic subtest pipe-A-eDP-1 failed.
**** DEBUG ****
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 23858000 (41.91 Hz)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_fb(433)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 8335000 (119.98 Hz)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 23754000 (42.10 Hz)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_fb(433)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 8333000 (120.00 Hz)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 23822000 (41.98 Hz)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_fb(433)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 8333000 (120.00 Hz)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 23899000 (41.84 Hz)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_fb(433)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 433
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b1/433
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 8330000 (120.05 Hz)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_fb(432)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: plane_set_size (2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
(kms_vrr:3222) igt_kms-DEBUG: display: A.0: fb_set_size(2880x1800)
(kms_vrr:3222) igt_kms-DEBUG: display: commit {
(kms_vrr:3222) igt_kms-DEBUG: display:     populating plane data: A.0, fb 432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_X" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_Y" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_W" to 0xb400000/188743680
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "SRC_H" to 0x7080000/117964800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_W" to 0xb40/2880
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_H" to 0x708/1800
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "FB_ID" to 0x1b0/432
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "CRTC_ID" to 0x97/151
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_ENCODING" to 0x1/1
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Setting property "COLOR_RANGE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: plane A.0: Ignoring property "COLOR_PIPELINE" to 0x0/0
(kms_vrr:3222) igt_kms-DEBUG: display: }
(kms_vrr:3222) DEBUG: event_ns - last_event_ns: 23800000 (42.02 Hz)
(kms_vrr:3222) INFO: Completed 312 flips, 231 were in threshold for [(120 Hz) 8333333ns,(42 Hz) 23809523ns]
(kms_vrr:3222) CRITICAL: Test assertion failure function test_basic, file ../tests/kms_vrr.c:746:
(kms_vrr:3222) CRITICAL: Failed assertion: result > 75
(kms_vrr:3222) CRITICAL: Refresh rates (120/42 Hz) 8333333ns/23809523ns: Target VRR on threshold not reached, result was 74%
(kms_vrr:3222) igt_core-INFO: Stack trace:
(kms_vrr:3222) igt_core-INFO:   #0 ../lib/igt_core.c:2075 __igt_fail_assert()
(kms_vrr:3222) igt_core-INFO:   #1 ../tests/kms_vrr.c:746 test_basic()
(kms_vrr:3222) igt_core-INFO:   #2 ../tests/kms_vrr.c:1119 run_vrr_test.constprop.0()
(kms_vrr:3222) igt_core-INFO:   #3 ../tests/kms_vrr.c:1205 __igt_unique____real_main1167()
(kms_vrr:3222) igt_core-INFO:   #4 ../tests/kms_vrr.c:1167 main()
(kms_vrr:3222) igt_core-INFO:   #5 [__libc_init_first+0x8a]
(kms_vrr:3222) igt_core-INFO:   #6 [__libc_start_main+0x8b]
(kms_vrr:3222) igt_core-INFO:   #7 [_start+0x25]
****  END  ****
Dynamic subtest pipe-A-eDP-1: FAIL (6.541s)
Subtest max-min: FAIL (6.855s)
Dmesg
<6> [127.279291] Console: switching to colour dummy device 80x25
<6> [127.279596] [IGT] kms_vrr: executing
<7> [127.285023] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]
<7> [127.285032] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]
<7> [127.285194] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [127.285311] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected
<7> [127.285559] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2]
<7> [127.285562] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]
<7> [127.285677] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [127.285761] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected
<7> [127.285984] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3]
<7> [127.285987] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]
<7> [127.286112] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [127.286311] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected
<7> [127.286628] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1]
<7> [127.286631] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:393:eDP-1]
<7> [127.286730] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [127.286833] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [127.287256] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7> [127.287572] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7> [127.287680] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [127.287884] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7> [127.288241] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5> [127.288255] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [127.288260] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [127.288264] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] DisplayID extension version 0x13, primary use 0x00
<7> [127.288274] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5> [127.288283] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [127.288288] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD monitor
<5> [127.288297] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [127.288301] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:393:eDP-1] ELD size 20, SAD count 0
<5> [127.288309] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [127.288339] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] VRR capable: yes
<7> [127.288612] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7> [127.288861] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:393:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5> [127.289200] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [127.289203] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<5> [127.289205] [drm] DisplayID checksum invalid, remainder is 248 (ignoring)
<7> [127.289283] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:393:eDP-1] probed modes:
<7> [127.289288] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [127.289292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [127.289305] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1]
<7> [127.289309] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:402:DP-1]
<7> [127.289449] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:402:DP-1] disconnected
<7> [127.289457] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2]
<7> [127.289459] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:414:DP-2]
<7> [127.289572] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:414:DP-2] disconnected
<7> [127.289581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3]
<7> [127.289583] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:422:DP-3]
<7> [127.289697] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:422:DP-3] disconnected
<6> [127.290095] [IGT] kms_vrr: starting subtest max-min
<6> [127.291432] [IGT] kms_vrr: starting dynamic subtest pipe-A-eDP-1
<7> [127.292080] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:432]
<7> [127.316276] xe 0000:00:02.0: [drm:drm_mode_addfb2] [FB:433]
<7> [127.379567] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [127.379714] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 695310 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [127.379812] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2607413 available 3240000
<7> [127.379916] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [127.380012] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [127.380107] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6329869/8388608 link 421991/524288, found tu 64, data 6750791/8388608 link 450052/524288)
<7> [127.380226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state
<7> [127.380345] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [127.380460] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [127.380556] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [127.380641] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [127.380725] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [127.380806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [127.380888] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [127.380968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [127.381049] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [127.381128] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [127.381226] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [127.381327] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [127.381426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [127.381511] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,
<7> [127.381588] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 61440, rem: 0, den: 1,
<7> [127.381665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 210, tx_clk_div: 0.
<7> [127.381741] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [127.381818] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [127.381894] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [127.381968] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [127.382041] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [127.382114] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [127.382202] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [127.382299] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 347710, found 695309)
<7> [127.382396] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 347710, found 695309)
<7> [127.382484] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 432000, found 810000)
<7> [127.382560] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in min_voltage_level (expected 0, found 1)
<7> [127.382638] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [127.382716] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [127.382822] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4051) -> ( 0 - 4011), size 4051 -> 4011
<7> [127.382890] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4051 - 4096) -> (4011 - 4096), size 45 -> 85
<7> [127.382962] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [127.383032] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 2, 25, 25, 25, 25, 25, 0, 0, 0, 5, 0
<7> [127.383102] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 49, 601, 601, 601, 601, 601, 0, 0, 63, 121, 135
<7> [127.383170] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 55, 663, 663, 663, 663, 663, 0, 0, 64, 135, 136
<7> [127.383254] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 2781236 num active planes 1
<7> [127.383366] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 2921 qgv_peak_bw: 38400
<7> [127.383473] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 2921 qgv_peak_bw: 38400
<7> [127.383555] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [127.383636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 2921 qgv_peak_bw: 38400
<7> [127.383717] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 2921
<7> [127.383811] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 173855 kHz -> 347655 kHz
<7> [127.383906] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 43457 kHz
<7> [127.383988] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via crawling and squashing
<7> [127.384070] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 360000 kHz, actual 360000 kHz
<7> [127.384149] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 1, actual 1
<7> [127.384278] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [127.384392] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [127.384504] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [127.384597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [127.384686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [127.384775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [127.384862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [127.384942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [127.385020] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [127.385098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6750791, data_n: 8388608, link_m: 450052, link_n: 524288, tu: 64
<7> [127.385180] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [127.385281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [127.385379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [127.385473] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [127.385549] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [127.385623] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [127.385701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [127.385776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [127.385850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [127.385923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [127.385997] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [127.386071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [127.386144] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [127.386243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [127.386338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [127.386434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [127.386519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [127.386599] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [127.386677] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [127.386750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [127.386824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 120 695309 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [127.386898] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [127.386971] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pipe src: 2880x1800+0+0, pixel rate 695309, min cdclk 347655
<7> [127.387048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 35, ips linetime: 0
<7> [127.387124] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [127.387351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [127.387467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [127.387554] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [127.387629] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,
<7> [127.387703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,
<7> [127.387778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.
<7> [127.387853] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [127.387926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [127.388000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [127.388074] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [127.388146] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [127.388403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [127.388511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [127.388605] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [127.388693] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [127.388766] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [127.388837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [127.388916] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [127.388995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [127.389073] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [127.389152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [127.389252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [127.389346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [127.389441] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [127.389517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [127.389589] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [127.389660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:432] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [127.389734] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [127.389806] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [127.389878] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [127.389949] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [127.390022] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [127.390095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [127.390173] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [127.392119] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [127.392865] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [127.392999] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [127.393701] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [127.393812] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [127.600382] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [127.601221] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [127.611705] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [127.612106] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [127.612582] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [127.664598] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [127.665045] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [127.673605] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [127.674241] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [127.674372] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [127.675874] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [127.676438] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [127.677008] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1801071 0x16832a72)
<7> [127.677520] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 360000 kHz, VCO 960000 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 1
<7> [127.678123] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 6 (mbus joined: yes)
<7> [127.678580] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=900
<7> [127.679031] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [127.679426] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [127.679780] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [127.680171] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [127.680504] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [127.680828] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [127.681149] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [127.681535] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [127.681918] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [127.682331] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [127.682673] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [127.682992] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [127.683392] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [127.683706] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:402:DP-1]
<7> [127.684086] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:414:DP-2]
<7> [127.684503] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:422:DP-3]
<7> [127.684904] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [127.686319] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [127.686735] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [127.689068] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [127.689309] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (485 ms remaining)
<7> [127.698984] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [127.699272] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [127.699530] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [127.699960] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [128.176390] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [128.257907] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [128.258413] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [128.258849] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [128.294595] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [128.294936] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [128.295263] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [128.295845] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [128.336276] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [128.336250] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [128.336260] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4
<7> [128.469307] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [128.469882] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [128.470420] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [128.472754] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [128.474397] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [128.475318] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 07
<7> [128.476600] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [128.478106] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [128.479475] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [128.479925] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [128.481511] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [128.481959] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 810000, lane count = 4
<7> [128.482913] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [128.483483] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [128.483917] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [128.484469] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000
<7> [128.492029] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [128.493948] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [128.494498] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [128.498539] xe 0000:00:02.0: [drm:i915_fifo_underrun_reset_write [xe]] Re-arming FIFO underruns on pipe A
<7> [128.499261] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [128.499685] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 695310 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [128.500025] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 810000 bpp input 30 compressed 0.0000 HDR no link rate required 2607413 available 3240000
<7> [128.500383] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [128.500692] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [128.501138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [fastset]
<7> [128.501507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [128.501790] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [128.502083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [128.502357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [128.502594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [128.502824] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [128.503041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6750791, data_n: 8388608, link_m: 450052, link_n: 524288, tu: 64
<7> [128.503271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [128.503477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [128.503682] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [128.503882] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7> [128.504071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [128.504270] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7> [128.504445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [128.504612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [128.504775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: no, vmin: 1906, vmax: 5718, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [128.504932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 5614, vmin vtotal: 1906, vmax vtotal: 5718
<7> [128.505086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [128.505269] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [128.505411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [128.505554] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [128.505697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 120 695309 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [128.505833] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=695309, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [128.505962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 810000, pipe src: 2880x1800+0+0, pixel rate 695309, min cdclk 347655
<7> [128.506089] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 35, ips linetime: 0
<7> [128.506283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [128.506403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [128.506519] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [128.506635] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [128.506749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: yes,
<7> [128.506857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 61440, rem: 0, den: 1,
<7> [128.506964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 210, tx_clk_div: 0.
<7> [128.507067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [128.507174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [128.507274] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [128.507370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [128.507468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [128.507561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [128.507655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [128.507748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [128.507838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [128.507925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [128.508011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [128.508096] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [128.508184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [128.508278] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [128.508369] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [128.508462] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [128.508542] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [128.508624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [128.508706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [128.508801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [128.508899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:432] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [128.508996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [128.509072] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [128.509184] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [128.529684] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 10600448 bytes of contiguous stolen space for FBC, limit: 2
<7> [128.529927] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:35:plane 1A]
<7> [128.533822] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [128.534107] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [128.828195] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [128.828598] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [128.828702] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [128.829538] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [128.829757] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [128.856323] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [128.856497] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [128.856591] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [128.861025] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [128.861168] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [128.887203] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [128.887419] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [128.887517] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [128.893180] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [128.893334] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [128.919287] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [128.919468] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [128.919560] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [128.925272] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [128.925392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [128.951267] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [128.951483] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [128.951604] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [128.957430] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [128.957588] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [128.984231] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [128.984437] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [128.984536] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [128.989470] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [128.989583] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.016185] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.016357] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.016454] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.021636] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.021793] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.048294] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.048474] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.048568] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.053805] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.053921] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.080309] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.080488] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.080581] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.085941] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.086059] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.112294] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.112484] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.112580] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.118085] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.118240] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.144312] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.144491] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.144583] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.150244] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.150386] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.176294] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.176479] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.176574] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.182372] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.182482] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.208322] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.208496] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.208591] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.214463] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.214597] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.240295] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.240468] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.240563] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.246628] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.246754] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.273208] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.273390] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.273484] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.278833] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.278967] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.305289] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.305483] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.305577] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.310959] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.311099] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.337314] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.337493] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.337586] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.343066] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.343182] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.369303] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.369478] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.369573] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.375308] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.375441] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.401297] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.401485] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.401579] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.407390] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.407533] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.433301] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.433479] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.433573] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.439471] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.439580] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.466199] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.466394] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.466502] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.471673] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.471803] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.498288] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.498471] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.498563] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.503807] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.503913] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.530287] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.530462] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.530557] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.535954] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.536056] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.562297] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.562472] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.562564] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.568161] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.568307] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.594298] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.594471] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.594566] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.600246] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.600383] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.626290] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.626464] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.626559] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.632361] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.632477] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.658296] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.658471] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.658565] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.664481] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.664607] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.691308] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.691478] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.691573] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.696577] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.696684] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.723220] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.723450] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.723568] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.728850] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.729001] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.755316] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.755494] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.755589] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.760950] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.761066] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.787297] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.787472] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.787566] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.793165] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.793309] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.819292] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.819472] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.819566] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.825023] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.825116] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.851224] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.851410] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.851528] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.859085] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.859218] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.893300] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.893525] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.893621] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.897417] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.897536] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.924305] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.924483] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.924575] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.929276] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.929371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.956311] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.956449] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.956546] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.961428] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.961525] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [129.988301] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [129.988462] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [129.988558] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [129.993611] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [129.993698] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.020289] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.020438] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.020533] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.025697] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.025798] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.052313] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.052472] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.052569] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.057844] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.057931] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.084322] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.084483] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.084577] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.089980] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.090067] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.116309] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.116468] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.116565] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.122140] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.122241] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.149319] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.149462] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.149555] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.154948] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.155048] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.181208] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.181344] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.181453] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.187077] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.187163] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.213191] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.213369] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.213489] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.218585] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.218672] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.245299] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.245438] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.245532] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.250708] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.250793] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.277317] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.277483] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.277578] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.282852] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.282940] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.309299] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.309458] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.309554] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.314983] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.315066] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.341291] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.341428] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.341526] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.347163] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.347256] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.374289] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.374433] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.374529] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.379936] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.380019] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.406291] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.406450] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.406550] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.412090] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.412175] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.438302] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.438462] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.438556] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.443587] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.443672] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.470306] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.470442] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.470536] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.475688] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.475771] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.502305] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.502442] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.502538] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.507849] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.507944] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.512495] xe 0000:00:02.0: [drm:intel_dp_dump_link_status [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] ln0_1:0x77 ln2_3:0x77 align:0x80 sink:0x1 adj_req0_1:0x0 adj_req2_3:0x0
<7> [130.512628] xe 0000:00:02.0: [drm:intel_dp_needs_link_retrain [xe]] [ENCODER:392:DDI A/PHY A] 8b/10b link not ok, retraining
<7> [130.534284] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.534420] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.534516] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.540000] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.540082] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.566279] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.566416] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.566513] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.572127] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.572218] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.599291] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.599432] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.599527] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.604273] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.604359] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.631311] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.631470] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.631567] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.636427] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.636515] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.663282] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.663419] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.663514] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.668594] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.668677] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.695304] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.695465] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.695558] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.700689] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.700771] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.727299] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.727457] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.727555] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.732840] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.732924] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.759302] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.759460] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.759560] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.764987] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.765068] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.791280] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.791418] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.791517] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.797772] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.797854] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.824304] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.824464] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.824568] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.829951] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.830037] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.856280] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.856417] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.856512] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.861407] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.861488] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.888305] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.888457] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.888550] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.893611] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.893693] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.920324] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.920482] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.920577] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.925705] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.925787] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.952307] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.952467] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.952562] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.958438] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.958523] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [130.984287] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [130.984443] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [130.984543] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [130.989997] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [130.990081] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.017295] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.017455] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.017553] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.022766] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.022850] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.049240] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.049498] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.049620] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.054963] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.055049] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.081184] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.081312] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.081403] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.086431] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.086515] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.113200] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.113322] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.113413] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.118584] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.118666] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.145191] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.145304] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.145392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.150694] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.150774] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.177185] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.177302] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.177393] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.183431] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.183545] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.209181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.209287] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.209365] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.215631] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.215722] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.242196] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.242303] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.242380] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.247101] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.247188] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.274192] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.274305] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.274384] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.279265] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.279346] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.306183] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.306304] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.306396] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.311405] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.311492] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.338181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.338306] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.338393] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.344211] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.344312] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.370186] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.370295] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.370371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.376324] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.376435] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.402181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.402305] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.402393] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.408455] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.408553] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.434194] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.434306] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.434390] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.440617] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.440702] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.467181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.467291] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.467371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.472748] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.472830] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.499181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.499310] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.499401] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.504264] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.504354] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.531181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.531293] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.531371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.536432] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.536514] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.563189] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.563309] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.563397] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.569218] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.569308] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.595197] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.595307] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.595387] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.601310] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.601400] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.627180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.627287] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.627366] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.632828] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.632906] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.659179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.659285] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.659362] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.664974] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.665052] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.691183] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.691298] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.691385] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.697754] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.697845] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.724192] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.724314] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.724392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.729253] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.729333] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.756189] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.756307] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.756394] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.761424] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.761525] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.788181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.788297] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.788376] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.794216] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.794305] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.820180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.820286] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.820363] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.825687] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.825766] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.852189] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.852306] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.852394] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.857821] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.857903] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.884192] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.884306] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.884385] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.890598] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.890689] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.917184] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.917304] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.917392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.922109] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.922207] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.949182] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.949298] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.949375] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.954940] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.955032] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [131.981180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [131.981297] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [131.981380] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [131.986403] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [131.986485] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.013180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.013293] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.013372] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.018570] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.018649] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.045180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.045292] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.045375] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.050687] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.050764] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.077186] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.077304] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.077398] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.083437] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.083544] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.109180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.109288] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.109365] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.115576] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.115659] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.142184] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.142297] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.142375] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.147133] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.147229] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.174192] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.174319] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.174406] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.179508] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.179607] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.206185] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.206343] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.206426] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.212098] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.212221] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.238188] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.238331] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.238411] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.243589] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.243669] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.270180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.270302] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.270386] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.276324] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.276407] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.302190] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.302303] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.302385] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.308446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.308535] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.334180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.334291] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.334371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.340615] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.340695] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.367196] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.367315] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.367391] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.372770] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.372854] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.399180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.399288] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.399371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.404435] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.404517] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.431197] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.431312] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.431398] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.437085] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.437168] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.463180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.463289] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.463373] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.468580] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.468661] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.495182] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.495293] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.495380] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.500691] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.500769] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.527180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.527302] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.527402] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.532830] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.532911] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.559179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.559301] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.559392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.565601] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.565685] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.592182] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.592284] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.592364] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.597335] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.597421] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.624179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.624293] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.624379] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.629940] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.630030] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.656180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.656283] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.656362] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.662048] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.662125] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.688208] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.688320] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.688411] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.694220] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.694309] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.720187] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.720295] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.720376] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.726303] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.726393] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.752182] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.752290] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.752370] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.758449] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.758549] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.784180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.784289] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.784372] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.790632] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.790711] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.817179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.817284] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.817365] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.822104] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.822193] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.849177] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.849299] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.849383] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.854287] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.854372] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.881193] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.881325] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.881404] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.887067] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.887146] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.913179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.913288] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.913367] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.919220] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.919304] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.945181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.945284] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.945362] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.950677] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.950754] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [132.977190] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [132.977304] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [132.977393] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [132.983433] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [132.983520] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.009177] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.009309] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.009412] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.015635] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.015716] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.042179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.042297] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.042373] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.047751] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.047830] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.072176] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD off
<7> [133.072382] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067
<7> [133.074179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.074295] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.074384] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.079912] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.079995] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.106190] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.106312] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.106400] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.112072] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.112155] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.138180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.138300] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.138380] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.144226] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.144312] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.170180] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.170287] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.170367] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.176354] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.176455] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.202179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.202283] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.202362] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.208443] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.208530] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.234186] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.234295] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.234376] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.240610] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.240691] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.267339] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.267481] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.267570] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.272118] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.272212] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.299194] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.299341] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.299448] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.304946] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.305031] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.331183] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.331329] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.331410] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.337097] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.337221] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.363190] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.363304] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.363381] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.369250] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.369347] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.395175] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.395292] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.395381] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.401313] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.401404] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.427177] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.427292] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.427379] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.433439] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.433536] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.459182] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.459299] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.459382] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.465638] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.465728] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.492181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.492297] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.492385] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.497747] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.497829] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.524186] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.524307] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.524384] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.529921] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.530012] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.556182] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.556301] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.556390] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.561408] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.561490] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.588188] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.588307] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.588392] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.594204] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.594290] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.620179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.620297] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.620391] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.626317] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.626405] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.652175] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.652286] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.652371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.658451] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.658564] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.684179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.684288] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.684371] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.690624] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.690719] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.717177] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.717284] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.717365] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.722749] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.722834] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.749181] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.749303] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.749383] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.754915] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.754997] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.781194] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.781320] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.781409] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.787085] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.787186] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.813175] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.813285] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.813370] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.819212] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.819317] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<6> [133.832477] [IGT] kms_vrr: finished subtest pipe-A-eDP-1, FAIL
<7> [133.832810] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected yes, found no)
<7> [133.832976] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [133.833073] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected 0, found -1)
<7> [133.833209] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 4, found 0)
<7> [133.833319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 6750791/8388608 link 450052/524288, found tu 0, data 0/0 link 0/0)
<7> [133.833440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000100, found 0x00000000)
<7> [133.833539] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 1, found 0)
<7> [133.833628] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 2880, found 0)
<7> [133.833714] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 3040, found 0)
<7> [133.833800] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 2880, found 0)
<7> [133.833886] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 3040, found 0)
<7> [133.833972] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 2928, found 0)
<7> [133.834059] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 2960, found 0)
<7> [133.834154] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 1800, found 0)
<7> [133.834248] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 1800, found 0)
<7> [133.834339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 1803, found 0)
<7> [133.834430] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 1809, found 0)
<7> [133.834512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 1906, found 0)
<7> [133.834592] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 1906, found 0)
<7> [133.834672] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 2880, found 0)
<7> [133.834752] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 3040, found 0)
<7> [133.834830] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 2880, found 0)
<7> [133.834908] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 3040, found 0)
<7> [133.834985] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 2928, found 0)
<7> [133.835062] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 2960, found 0)
<7> [133.835138] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 1800, found 0)
<7> [133.835241] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 1800, found 0)
<7> [133.835339] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 1803, found 0)
<7> [133.835437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 1809, found 0)
<7> [133.835521] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 1906, found 0)
<7> [133.835598] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 1906, found 0)
<7> [133.835673] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 1, found 0)
<7> [133.835748] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 2, found 0)
<7> [133.835824] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 8, found 0)
<7> [133.835898] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 30, found 0)
<7> [133.835971] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 695309, found 0)
<7> [133.836045] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 695309, found 0)
<7> [133.836121] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 810000, found 0)
<7> [133.836267] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in min_voltage_level (expected 1, found 0)
<7> [133.836368] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [133.836467] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:151:pipe A] releasing DPLL 0
<7> [133.836578] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [133.836644] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [133.836730] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 4011) -> ( 0 - 0), size 4011 -> 0
<7> [133.836795] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb (4011 - 4096) -> ( 0 - 0), size 85 -> 0
<7> [133.836858] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [133.836916] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 2, 25, 25, 25, 25, 25, 0, 0, 0, 5, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [133.836970] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 49, 601, 601, 601, 601, 601, 0, 0, 63, 121, 135 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [133.837024] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 55, 663, 663, 663, 663, 663, 0, 0, 64, 135, 136 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [133.837090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 0 num active planes 0
<7> [133.837244] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [133.837370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [133.837474] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [133.837556] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [133.837636] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [133.837716] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 347655 kHz -> 0 kHz
<7> [133.837811] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 43457 kHz -> 0 kHz
<7> [133.837895] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via crawling and squashing
<7> [133.837977] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 153600 kHz, actual 153600 kHz
<7> [133.838057] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [133.838162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: no [modeset]
<7> [133.838186] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [133.838252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [NOFB], visible: no
<7> [133.838306] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [133.838341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [133.838396] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [133.838428] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [133.838512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [133.838589] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [133.838668] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [133.838808] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [133.838897] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [133.855885] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [133.856011] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [134.064252] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 0
<7> [134.064660] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [134.064963] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [134.065621] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [134.075694] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power off
<7> [134.075997] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [134.076165] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [134.076357] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [134.076610] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [134.128372] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [134.128649] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [134.128748] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:151:pipe A]
<7> [134.128886] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [134.129071] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - short
<7> [134.129465] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [134.130187] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [134.130613] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [134.131063] xe 0000:00:02.0: [drm:__intel_fbc_disable [xe]] Disabling FBC on [PLANE:35:plane 1A]
<7> [134.131788] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [134.132105] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [134.132455] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [134.132748] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [134.133029] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [134.133351] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [134.133625] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [134.133898] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [134.134194] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [134.134462] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [134.134744] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [134.135003] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [134.135306] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [134.135572] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [134.135968] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 3 (mbus joined: no)
<7> [134.136324] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [134.136593] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [134.137086] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [134.137531] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [134.137994] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [134.138340] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [134.138749] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [134.139920] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<6> [134.145641] [IGT] kms_vrr: finished subtest max-min, FAIL
<7> [134.146736] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:393:eDP-1] Limiting target display pipe bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [134.147045] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:392:DDI A/PHY A][CRTC:151:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 min link_bpp 18.0000 max link_bpp 30.0000
<7> [134.147353] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 HDR no link rate required 1303913 available 1728000
<7> [134.147630] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [134.147892] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:392:DDI A/PHY A] [CRTC:151:pipe A]
<7> [134.148141] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.enable (expected no, found yes)
<7> [134.148396] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [134.148618] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in cpu_transcoder (expected -1, found 0)
<7> [134.148833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in lane_count (expected 0, found 4)
<7> [134.149037] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dp_m_n (expected tu 0 data 0/0 link 0/0, found tu 64, data 6329869/8388608 link 421991/524288)
<7> [134.149250] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in output_types (expected 0x00000000, found 0x00000100)
<7> [134.149440] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in framestart_delay (expected 0, found 1)
<7> [134.149617] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hdisplay (expected 0, found 2880)
<7> [134.149790] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_htotal (expected 0, found 3040)
<7> [134.149955] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_start (expected 0, found 2880)
<7> [134.150123] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hblank_end (expected 0, found 3040)
<7> [134.150333] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_start (expected 0, found 2928)
<7> [134.150504] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_hsync_end (expected 0, found 2960)
<7> [134.150654] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vdisplay (expected 0, found 1800)
<7> [134.150806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_start (expected 0, found 1800)
<7> [134.150952] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_start (expected 0, found 1803)
<7> [134.151117] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vsync_end (expected 0, found 1809)
<7> [134.151298] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vtotal (expected 0, found 1906)
<7> [134.151437] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_vblank_end (expected 0, found 1906)
<7> [134.151577] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hdisplay (expected 0, found 2880)
<7> [134.151711] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_htotal (expected 0, found 3040)
<7> [134.151858] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_start (expected 0, found 2880)
<7> [134.151996] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hblank_end (expected 0, found 3040)
<7> [134.152118] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_start (expected 0, found 2928)
<7> [134.152453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_hsync_end (expected 0, found 2960)
<7> [134.152571] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vdisplay (expected 0, found 1800)
<7> [134.152683] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_start (expected 0, found 1800)
<7> [134.152792] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_start (expected 0, found 1803)
<7> [134.152899] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vsync_end (expected 0, found 1809)
<7> [134.153003] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vtotal (expected 0, found 1906)
<7> [134.153106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_vblank_end (expected 0, found 1906)
<7> [134.153219] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pixel_multiplier (expected 0, found 1)
<7> [134.153319] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (2) (expected 0, found 2)
<7> [134.153417] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.flags (8) (expected 0, found 8)
<7> [134.153512] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in dpll_hw_state
<7> [134.153605] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7> [134.153697] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [134.153791] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: yes,
<7> [134.153879] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 61440, rem: 0, den: 1,
<7> [134.153965] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 210, tx_clk_div: 0.
<7> [134.154051] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [134.154135] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [134.154246] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x34, pll[1] = 0x0, pll[2] = 0x84, pll[3] = 0x1
<7> [134.154347] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [134.154445] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [134.154530] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xf0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x0
<7> [134.154616] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0xf, pll[18] = 0xe5, pll[19] = 0x23
<7> [134.154699] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7> [134.154781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [134.154860] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: fracen: no,
<7> [134.154936] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1.
<7> [134.155012] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state:
<7> [134.155087] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21
<7> [134.155164] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [134.155259] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [134.155352] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [134.155446] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [134.155522] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [134.155593] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in pipe_bpp (expected 0, found 30)
<7> [134.155665] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.pipe_mode.crtc_clock (expected 0, found 347710)
<7> [134.155736] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in hw.adjusted_mode.crtc_clock (expected 0, found 347710)
<7> [134.155806] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:151:pipe A] fastset requirement not met in port_clock (expected 0, found 432000)
<7> [134.155877] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:151:pipe A] fastset requirement not met, forcing full modeset
<7> [134.155984] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [134.156049] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:151:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [134.156118] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:35:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [134.156263] xe 0000:00:02.0: [drm:skl_print_plane_ddb_changes [xe]] [PLANE:145:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [134.156343] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [134.156414] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [134.156480] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [134.156538] xe 0000:00:02.0: [drm:skl_print_plane_wm_changes [xe]] [PLANE:35:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [134.156604] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:151:pipe A] data rate 1390840 num active planes 1
<7> [134.156688] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [134.156773] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [134.156855] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [134.156937] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [134.157019] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [134.157100] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] [CRTC:151:pipe A] min cdclk: 0 kHz -> 173855 kHz
<7> [134.157212] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz
<7> [134.157318] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [134.157420] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [134.157518] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [134.157617] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:151:pipe A] allocated DPLL 0
<7> [134.157693] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:151:pipe A] reserving DPLL 0
<7> [134.157773] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:151:pipe A] enable: yes [modeset]
<7> [134.157857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [134.157938] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [134.158018] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [134.158098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [134.158194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [134.158190] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [134.158298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [134.158367] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [134.158399] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [134.158488] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [134.158496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [134.158580] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [134.158617] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [134.158663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [134.158748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [134.158848] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [134.158947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [134.159043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [134.159118] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [134.159211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [134.159310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [134.159408] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [134.159495] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [134.159570] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [134.159644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [134.159717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [134.159792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [134.159866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: dc balance: no, vmin: 0 vmax: 0 guardband: 0, slope: 0 max increase: 0 max decrease: 0 vblank target: 0
<7> [134.159940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [134.160014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [134.160090] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [134.160184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [134.160286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [134.160387] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [134.160488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [134.160566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [134.160642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [134.160718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [134.160794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [134.160869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: fracen: no,
<7> [134.160944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [134.161019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [134.161093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [134.161287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [134.161402] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [134.161506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [134.161590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [134.161664] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [134.161739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [134.161813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [134.161886] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [134.161959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [134.162031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [134.162104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [134.162207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [134.162303] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [134.162398] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [134.162488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [134.162562] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [134.162636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [134.162710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [134.162645] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [134.162783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:35:plane 1A] fb: [FB:394] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [134.162857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [134.162870] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [134.162931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [134.162986] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [134.163007] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:65:plane 2A] fb: [NOFB], visible: no
<7> [134.163079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:95:plane 3A] fb: [NOFB], visible: no
<7> [134.163130] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [134.163164] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:125:plane 4A] fb: [NOFB], visible: no
<7> [134.163260] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:135:plane 5A] fb: [NOFB], visible: no
<7> [134.163359] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:145:cursor A] fb: [NOFB], visible: no
<7> [134.163523] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [134.163629] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [134.163872] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [134.164000] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [134.164128] xe 0000:00:02.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [134.164263] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7> [134.164355] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [134.164470] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [134.164554] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [134.164637] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:392:DDI A/PHY A]
<7> [134.164704] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:401:DDI TC1/PHY TC1]
<7> [134.164769] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:403:DP-MST A]
<7> [134.164834] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:404:DP-MST B]
<7> [134.164899] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:405:DP-MST C]
<7> [134.164962] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:413:DDI TC2/PHY TC2]
<7> [134.165027] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:415:DP-MST A]
<7> [134.165093] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:416:DP-MST B]
<7> [134.165164] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:417:DP-MST C]
<7> [134.165245] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:421:DDI TC3/PHY TC3]
<7> [134.165325] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:423:DP-MST A]
<7> [134.165405] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:424:DP-MST B]
<7> [134.165484] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:425:DP-MST C]
<7> [134.165569] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [134.165725] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [134.165786] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [134.165888] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [134.167188] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:151:pipe A]
<7> [134.167274] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [134.169207] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turn panel power on
<7> [134.169297] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power cycle (460 ms remaining)
<7> [134.632665] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [134.659067] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [134.659594] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 wait for panel power on
<7> [134.660075] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [134.695930] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [134.696395] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:392:DDI A/PHY A] - long
<7> [134.696744] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7> [134.697322] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:392:DDI A/PHY A]
<7> [134.868789] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [134.869260] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 turning VDD on
<7> [134.869571] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:392:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [134.871725] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [134.873311] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [134.874107] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [134.875384] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [134.876842] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [134.877997] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Clock recovery OK
<7> [134.878503] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [134.880015] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [134.880458] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:393:eDP-1][ENCODER:392:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [134.881434] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [134.881934] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [134.882337] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [134.882786] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:393:eDP-1] set backlight PWM = 192000
<7> [134.898810] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [134.900657] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:393:eDP-1]
<7> [134.901092] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:151:pipe A]
<7> [134.904298] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [134.905963] [IGT] kms_vrr: exiting, ret=98
<6> [134.915690] Console: switching to colour frame buffer device 180x56
Created at 2026-03-24 01:56:59