Results for igt@xe_module_load@load

Result: Pass

igt_runner0 results0.json guc_logs0.tar i915_display_info_post_exec0 boot0 dmesg0

DetailValue
Duration 1.35 seconds
Igt-Version
IGT-Version: 2.3-gbef147d2a (x86_64) (Linux: 7.0.0-rc2-lgci-xe-xe-4655-cfc20c776480fda8c-debug+ x86_64)
Out
Using IGT_SRANDOM=1772575567 for randomisation
Starting subtest: load
Opened device: /dev/dri/card0
Subtest load: SUCCESS (1.347s)
Err
Starting subtest: load
Subtest load: SUCCESS (1.347s)
Dmesg
<6> [174.792534] [IGT] xe_module_load: executing
<4> [174.792581] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030
<6> [174.797191] [IGT] xe_module_load: starting subtest load
<6> [174.955921] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0
<4> [174.955930] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [174.955932] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [174.955935] nvme 0000:05:00.0: [ 0] RxErr (First)
<6> [175.060524] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:05:00.0
<4> [175.060530] nvme 0000:05:00.0: PCIe Bus Error: severity=Correctable, type=Physical Layer, (Receiver ID)
<4> [175.060532] nvme 0000:05:00.0: device [15b7:5017] error status/mask=00000001/0000e000
<4> [175.060534] nvme 0000:05:00.0: [ 0] RxErr (First)
<5> [175.133139] Setting dangerous option force_probe - tainting kernel
<6> [175.134097] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0
<4> [175.134107] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
<4> [175.134111] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001000/00002000
<4> [175.134114] pcieport 0000:00:06.0: [12] Timeout
<6> [175.136105] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0 (no details found
<6> [175.136108] pcieport 0000:00:06.0: AER: Correctable error message received from 0000:00:06.0
<4> [175.136110] pcieport 0000:00:06.0: PCIe Bus Error: severity=Correctable, type=Data Link Layer, (Transmitter ID)
<4> [175.136111] pcieport 0000:00:06.0: device [8086:464d] error status/mask=00001100/00002000
<4> [175.136113] pcieport 0000:00:06.0: [ 8] Rollover
<4> [175.136114] pcieport 0000:00:06.0: [12] Timeout
<6> [175.136120] pcieport 0000:00:06.0: AER: Multiple Correctable error message received from 0000:00:06.0 (no details found
<6> [175.138636] xe 0000:03:00.0: vgaarb: deactivate vga console
<6> [175.140367] xe 0000:03:00.0: [drm] Running in SR-IOV PF mode
<7> [175.140402] xe 0000:03:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [175.141257] xe 0000:03:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [175.141266] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [175.141378] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [175.141474] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [175.141574] xe 0000:03:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<6> [175.145033] xe 0000:03:00.0: [drm] VISIBLE VRAM: 0x0000005400000000, 0x0000000400000000
<6> [175.145143] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [175.145145] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<6> [175.145147] xe 0000:03:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [175.145148] xe 0000:03:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000005400000000-56fb800000]
<7> [175.145273] xe 0000:03:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [175.145416] xe 0000:03:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [175.145542] xe 0000:03:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [175.145873] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [175.145991] xe 0000:03:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [175.146205] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [175.146324] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [175.146435] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [175.146546] xe 0000:03:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [175.146861] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [175.146994] xe 0000:03:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [175.147107] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [175.147215] xe 0000:03:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [175.147528] xe 0000:03:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [175.148003] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [175.161606] xe 0000:03:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [175.161721] xe 0000:03:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [175.161829] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [175.161974] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [175.162085] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [175.162194] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [175.162300] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [175.162401] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [175.162498] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [175.162614] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [175.162726] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [175.162827] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [175.162931] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [175.163030] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [175.163129] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [175.163222] xe 0000:03:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [175.163316] xe 0000:03:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [175.163409] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [175.163519] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [175.163627] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [175.163734] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [175.163836] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [175.163939] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [175.164041] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [175.164141] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [175.164236] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [175.164335] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [175.164429] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [175.164527] xe 0000:03:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [175.164632] xe 0000:03:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [175.164968] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [175.165121] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [175.165462] xe 0000:03:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [175.165635] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [175.166035] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [175.166151] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [175.166466] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [175.166599] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [175.166927] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [175.167058] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [175.167161] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [175.167476] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [175.167582] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [175.167705] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [175.167811] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [175.168281] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [175.168979] xe 0000:03:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [175.169462] xe 0000:03:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [175.169815] xe 0000:03:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [175.169937] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [175.170041] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [175.170138] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [175.170233] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [175.170327] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [175.170421] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [175.170513] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [175.170602] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [175.170699] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [175.170794] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [175.170883] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [175.170977] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [175.171061] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [175.171145] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [175.171228] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [175.171311] xe 0000:03:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [175.173645] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [175.173777] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [175.173890] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [175.174021] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [175.174125] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [175.174225] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [175.174331] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [175.174430] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [175.174528] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [175.174627] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [175.174735] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [175.174839] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [175.174950] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [175.175050] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [175.175156] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [175.175253] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [175.175352] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [175.175452] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [175.175571] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [175.175624] xe 0000:03:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<7> [175.175677] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [175.175784] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [175.175890] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [175.176005] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [175.176105] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [175.176204] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [175.176308] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [175.176413] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [175.176511] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [175.176608] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [175.176704] xe 0000:03:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [175.185482] xe 0000:03:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [175.185640] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [175.185758] xe 0000:03:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [175.186038] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:506:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [175.186548] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:506:DDI TC1/PHY F]
<6> [175.187105] xe 0000:03:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [175.187077] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:506:DDI TC1/PHY F]
<7> [175.187201] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:506:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [175.187754] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [175.187898] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC2/PHY G]
<7> [175.188220] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:525:DDI TC2/PHY G]
<7> [175.188336] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:525:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [175.188745] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:537:DDI TC3/PHY H]
<7> [175.188847] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:537:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [175.189306] xe 0000:03:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [175.189445] xe 0000:03:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:541:DDI TC4/PHY I]
<7> [175.189747] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY I]
<7> [175.189863] xe 0000:03:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [175.190633] xe 0000:03:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [175.190797] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: disabled
<7> [175.191155] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled
<7> [175.191300] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] hw state readout: disabled
<7> [175.191641] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] hw state readout: disabled
<7> [175.191740] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A
<7> [175.191838] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A
<7> [175.192153] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A
<7> [175.192253] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A
<7> [175.192349] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A
<7> [175.192647] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A
<7> [175.192740] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B
<7> [175.192833] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B
<7> [175.193136] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B
<7> [175.193238] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B
<7> [175.193336] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B
<7> [175.193631] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B
<7> [175.193726] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C
<7> [175.193830] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C
<7> [175.194140] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C
<7> [175.194235] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C
<7> [175.194329] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C
<7> [175.194631] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] hw state readout: disabled, pipe C
<7> [175.194730] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D
<7> [175.194825] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D
<7> [175.195131] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D
<7> [175.195223] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D
<7> [175.195315] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D
<7> [175.195620] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] hw state readout: disabled, pipe D
<7> [175.195721] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:506:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [175.195815] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST A] hw state readout: disabled, pipe A
<7> [175.195906] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST B] hw state readout: disabled, pipe B
<7> [175.196011] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST C] hw state readout: disabled, pipe C
<7> [175.196101] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST D] hw state readout: disabled, pipe D
<7> [175.196396] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [175.196486] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A
<7> [175.196574] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B
<7> [175.196663] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C
<7> [175.196751] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D
<7> [175.197167] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [175.197520] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [175.197627] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST A] hw state readout: disabled, pipe A
<7> [175.197722] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST B] hw state readout: disabled, pipe B
<7> [175.197820] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST C] hw state readout: disabled, pipe C
<7> [175.198521] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST D] hw state readout: disabled, pipe D
<7> [175.198619] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [175.198734] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [175.198842] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [175.199163] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [175.199278] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [175.199386] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [175.199690] xe 0000:03:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [175.199801] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:507:DP-1] hw state readout: disabled
<7> [175.200131] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:520:HDMI-A-1] hw state readout: disabled
<7> [175.200240] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-2] hw state readout: disabled
<7> [175.200344] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:HDMI-A-2] hw state readout: disabled
<7> [175.200649] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:538:HDMI-A-3] hw state readout: disabled
<7> [175.200752] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:DP-3] hw state readout: disabled
<7> [175.200854] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:550:HDMI-A-4] hw state readout: disabled
<7> [175.200965] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 0 kHz
<7> [175.201071] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz
<7> [175.201173] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz
<7> [175.201269] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz
<7> [175.201371] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz
<7> [175.201473] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz
<7> [175.201567] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 0 kHz
<7> [175.201660] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz
<7> [175.201752] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz
<7> [175.201845] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz
<7> [175.201945] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz
<7> [175.202035] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz
<7> [175.202126] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz
<7> [175.202215] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz
<7> [175.202303] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] min_cdclk 0 kHz
<7> [175.202394] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] min_cdclk 0 kHz
<7> [175.202485] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] min_cdclk 0 kHz
<7> [175.202573] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] min_cdclk 0 kHz
<7> [175.202666] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] min_cdclk 0 kHz
<7> [175.202767] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] min_cdclk 0 kHz
<7> [175.202867] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] min_cdclk 0 kHz
<7> [175.202972] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] min_cdclk 0 kHz
<7> [175.203076] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] min_cdclk 0 kHz
<7> [175.203174] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] min_cdclk 0 kHz
<7> [175.203266] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] min_cdclk 0 kHz
<7> [175.203356] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] min_cdclk 0 kHz
<7> [175.203445] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] min_cdclk 0 kHz
<7> [175.203532] xe 0000:03:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] min_cdclk 0 kHz
<7> [175.203830] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [175.203948] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [175.204050] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [175.204144] xe 0000:03:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [175.204234] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [175.204359] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [175.204472] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [175.204578] xe 0000:03:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [175.204921] xe 0000:03:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [175.205104] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [setup_hw_state]
<7> [175.205219] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]
<7> [175.205328] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [setup_hw_state]
<7> [175.205437] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [setup_hw_state]
<7> [175.205546] xe 0000:03:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [175.210471] xe 0000:03:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [175.215675] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x006601cf
<7> [175.215796] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [175.215886] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [175.215987] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [175.216067] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000020c2
<7> [175.216146] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [175.216223] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [175.216297] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [175.216373] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [175.216449] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [175.216523] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [175.216595] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [175.216667] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [175.216739] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [175.216811] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [175.216936] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [175.227923] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [175.228886] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [175.229161] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [175.229259] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [175.229348] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [175.229436] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [175.229520] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [175.314226] xe 0000:03:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [175.314228] xe 0000:03:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [175.314389] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [175.314496] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access
<7> [175.314603] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access
<7> [175.314704] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [175.314793] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [175.314876] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [175.315030] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [175.315148] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [175.315290] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [175.315382] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [175.315468] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [175.315550] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [175.315680] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [175.315760] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [175.315841] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [175.315927] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [175.317270] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [175.317358] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [175.317453] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [175.317542] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x11111440
<7> [175.317629] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [175.317712] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [175.317800] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [175.317887] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [175.317987] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [175.318077] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [175.318158] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [175.318236] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [175.318314] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [175.318391] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [175.318467] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [175.318545] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [175.318623] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [175.318701] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [175.318780] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [175.318858] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [175.318973] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [175.319049] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [175.319123] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [175.319196] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [175.319271] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [175.319349] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [175.319441] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [175.319526] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [175.319606] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [175.319687] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [175.319765] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [175.319844] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [175.319937] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [175.320029] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [175.320110] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [175.320191] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [175.320271] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [175.320358] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [175.320441] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [175.320531] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [175.320623] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [175.320708] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [175.320789] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [175.321104] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [175.321195] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [175.321281] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [175.321358] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [175.321824] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [175.321914] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [175.322007] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [175.322089] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [175.322384] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [175.322460] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [175.322535] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [175.322609] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [175.322686] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [175.322763] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [175.322837] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [175.323162] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [175.323246] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [175.323325] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [175.323401] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [175.323476] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [175.323549] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [175.323622] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [175.324304] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [175.329760] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0196f1cf
<7> [175.329857] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [175.329954] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [175.330044] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [175.330128] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000c00
<7> [175.330209] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [175.330282] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [175.330352] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [175.330424] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [175.330495] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [175.330570] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [175.330647] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [175.330723] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [175.330803] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [175.330905] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [175.331095] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [175.332860] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe8c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [175.334851] xe 0000:03:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [175.335857] xe 0000:03:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [175.356317] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [175.366968] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [175.367266] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [175.368761] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [175.368890] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [175.368995] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040
<7> [175.369078] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [175.369160] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [175.369242] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [175.369325] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [175.369406] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [175.369487] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [175.369569] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [175.372844] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [175.372958] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [175.373052] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [175.376302] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [175.376406] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [175.379553] xe 0000:03:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [175.380227] xe 0000:03:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [175.383963] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x023701cf
<7> [175.384073] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [175.384163] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [175.384246] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [175.384326] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00005ae2
<7> [175.384407] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [175.384489] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [175.384567] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [175.384643] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [175.384719] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [175.384791] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [175.384863] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [175.384948] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [175.385021] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [175.386275] xe 0000:03:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [175.386707] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [175.386836] xe 0000:03:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [175.397918] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [175.398251] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [175.398354] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [175.398442] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [175.398527] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [175.398609] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [175.398689] xe 0000:03:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [175.398776] xe 0000:03:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [175.398777] xe 0000:03:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [175.398778] xe 0000:03:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [175.398779] xe 0000:03:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [175.398780] xe 0000:03:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [175.398781] xe 0000:03:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [175.398782] xe 0000:03:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [175.398783] xe 0000:03:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [175.398786] xe 0000:03:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [175.398997] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [175.399104] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [175.399213] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [175.399311] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [175.399412] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [175.399505] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [175.399594] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [175.399681] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [175.399766] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [175.399853] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [175.400065] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [175.400149] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [175.400243] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [175.400338] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [175.400431] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [175.400519] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [175.400606] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [175.400693] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [175.400781] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [175.400876] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [175.401069] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [175.401157] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [175.401246] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [175.401334] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [175.401424] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [175.401510] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [175.401595] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [175.401686] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [175.401777] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [175.401866] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [175.402063] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [175.402148] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [175.402243] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [175.402333] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [175.402423] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [175.402510] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [175.402598] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [175.402694] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [175.402786] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [175.402875] xe 0000:03:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [175.404450] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [175.404575] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [175.404687] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [175.404791] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [175.404883] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [175.404985] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [175.405072] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [175.405159] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [175.405250] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [175.405338] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [175.405421] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [175.405501] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [175.405582] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [175.405662] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [175.405745] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [175.405826] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [175.405906] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [175.405999] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [175.406076] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [175.406152] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [175.406228] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [175.406304] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [175.406377] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [175.406453] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [175.406532] xe 0000:03:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [175.406611] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [175.406705] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [175.406794] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [175.406881] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [175.406976] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [175.407069] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [175.407155] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [175.407238] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [175.407319] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [175.407400] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [175.407483] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [175.407571] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [175.407793] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [175.407883] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [175.407979] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [175.408063] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [175.408146] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [175.408236] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [175.408323] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [175.408406] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [175.408487] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [175.408568] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [175.408651] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [175.408735] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [175.408930] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [175.409012] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [175.409097] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [175.409181] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [175.409261] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [175.409341] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [175.409421] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [175.409502] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [175.409589] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [175.409675] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [175.409757] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [175.409838] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [175.410113] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [175.410267] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [175.410378] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [175.410471] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [175.410556] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [175.410639] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [175.410722] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [175.410813] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [175.410899] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [175.411002] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [175.411083] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [175.411164] xe 0000:03:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [175.411589] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [175.415786] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x036561cf
<7> [175.415891] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [175.415996] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [175.416082] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [175.416165] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000046e0
<7> [175.416248] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [175.416329] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [175.416407] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [175.416483] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [175.416557] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [175.416631] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [175.416703] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [175.416775] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [175.416849] xe 0000:03:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [175.416952] xe 0000:03:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [175.417054] xe 0000:03:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [175.418336] xe 0000:03:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2bf5000 for xe_guc_buf_cache_init_with_size [xe]
<7> [175.438465] xe 0000:03:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [175.449617] xe 0000:03:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [175.449963] xe 0000:03:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [175.450573] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [175.450675] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [175.452216] xe 0000:03:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [175.452316] xe 0000:03:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [175.463919] xe 0000:03:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [175.464376] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [175.464565] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [175.464738] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [175.464897] xe 0000:03:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [175.466719] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [175.466855] xe 0000:03:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [175.467424] xe 0000:03:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [175.467498] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [175.467659] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [175.467778] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [175.467891] xe 0000:03:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [175.468578] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008
<7> [175.468723] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108
<7> [175.468853] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208
<7> [175.468978] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308
<7> [175.469084] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8
<7> [175.469196] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008
<7> [175.469303] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108
<7> [175.469414] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208
<7> [175.469516] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308
<7> [175.469614] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8
<7> [175.469711] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 0: start 0x52008
<7> [175.469812] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 1: start 0x52108
<7> [175.469927] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 2: start 0x52208
<7> [175.470064] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 3: start 0x52308
<7> [175.470182] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 4: start 0x523c8
<7> [175.470290] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 0: start 0x59008
<7> [175.470387] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 1: start 0x59108
<7> [175.470480] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 2: start 0x59208
<7> [175.470572] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 3: start 0x59308
<7> [175.470681] xe 0000:03:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 4: start 0x593c8
<7> [175.470984] xe 0000:03:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [175.471139] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [175.471332] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [175.471507] xe 0000:03:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [175.471696] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [fastset]
<7> [175.471815] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]
<7> [175.471961] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [fastset]
<7> [175.472069] xe 0000:03:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [fastset]
<7> [175.472836] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [175.472987] xe 0000:03:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [175.473426] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [175.473605] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [175.473857] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [175.474307] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [175.474413] xe 0000:03:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [175.474668] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [175.474882] xe 0000:03:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<5> [175.478001] Creating 4 MTD partitions on "xe.nvm.768":
<5> [175.478026] 0x000000000000-0x000000001000 : "xe.nvm.768.DESCRIPTOR"
<7> [175.482556] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:DP-1] adding connector to sysfs
<7> [175.484683] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card0-DP-1
<5> [175.485129] 0x000000001000-0x00000054e000 : "xe.nvm.768.GSC"
<7> [175.491213] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:DP-1] generating connector hotplug event
<7> [175.491529] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:520:HDMI-A-1] adding connector to sysfs
<7> [175.494923] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:520:HDMI-A-1] generating connector hotplug event
<7> [175.495134] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-2] adding connector to sysfs
<7> [175.497874] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card0-DP-2
<7> [175.502519] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-2] generating connector hotplug event
<7> [175.502698] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:HDMI-A-2] adding connector to sysfs
<5> [175.504525] 0x00000054e000-0x00000074e000 : "xe.nvm.768.OptionROM"
<7> [175.504770] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:HDMI-A-2] generating connector hotplug event
<7> [175.504970] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:538:HDMI-A-3] adding connector to sysfs
<7> [175.506344] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:538:HDMI-A-3] generating connector hotplug event
<7> [175.506470] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:DP-3] adding connector to sysfs
<7> [175.507994] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [175.508323] mei_lb xe.mei-gscfi.768-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:03:00.0 (ops xe_late_bind_component_ops [xe])
<7> [175.508429] xe 0000:03:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card0-DP-3
<7> [175.509804] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [175.511368] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [175.513890] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:DP-3] generating connector hotplug event
<7> [175.514076] xe 0000:03:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:550:HDMI-A-4] adding connector to sysfs
<7> [175.515303] xe 0000:03:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:550:HDMI-A-4] generating connector hotplug event
<5> [175.515540] 0x00000074e000-0x00000075e000 : "xe.nvm.768.DAM"
<7> [175.520980] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [175.521656] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<6> [175.524946] [drm] Initialized xe 1.1.0 for 0000:03:00.0 on minor 0
<7> [175.525055] xe 0000:03:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [175.525238] xe 0000:03:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [175.527155] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [175.527627] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:150:pipe A] not active, skipping
<7> [175.527772] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping
<7> [175.527899] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:386:pipe C] not active, skipping
<7> [175.528036] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:504:pipe D] not active, skipping
<7> [175.528186] xe 0000:03:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [175.528519] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [175.531463] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:507:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [175.531655] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [175.535951] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:520:HDMI-A-1] status updated from unknown to disconnected (epoch counter 0->1)
<7> [175.536122] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [175.540441] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [175.540623] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [175.544806] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:HDMI-A-2] status updated from unknown to disconnected (epoch counter 0->1)
<7> [175.544940] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [175.549088] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:538:HDMI-A-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [175.549201] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [175.553328] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7> [175.553446] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [175.557713] xe 0000:03:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:550:HDMI-A-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [175.558099] xe 0000:03:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [175.558248] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [175.558267] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [175.562736] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [175.562774] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [175.562778] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [175.566939] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [175.566950] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [175.566956] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [175.569924] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [175.571234] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [175.571242] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [175.571245] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [175.575504] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [175.575508] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [175.575511] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [175.579709] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] disconnected
<7> [175.579713] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [175.579716] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [175.583918] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [175.583922] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [175.583925] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [175.588090] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [175.588094] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [175.588100] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-1] enabled? no
<7> [175.588102] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-1] enabled? no
<7> [175.588104] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [175.588106] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-2] enabled? no
<7> [175.588108] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-3] enabled? no
<7> [175.588109] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [175.588111] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-4] enabled? no
<7> [175.588207] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [175.588219] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [175.588266] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [175.588277] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [175.589440] xe 0000:03:00.0: [drm:drm_client_modeset_probe]
<7> [175.589414] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [175.589546] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [175.589643] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1]
<7> [175.589662] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [175.589649] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-1]
<7> [175.589770] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [175.589884] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [175.590002] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [175.590110] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [175.590213] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [175.590315] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [175.590424] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [175.590529] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [175.590633] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [175.590735] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [175.590835] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [175.590938] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [175.591037] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [175.591136] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [175.591239] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [175.591343] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [175.591443] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [175.591548] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [175.591660] xe 0000:03:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [175.591781] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [175.591902] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x80000000)
<7> [175.592334] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [175.592492] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0xa0000000)
<7> [175.592665] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [175.592822] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0xa8000000)
<7> [175.592950] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [175.593091] xe 0000:03:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [175.593259] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [175.593871] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-1] disconnected
<7> [175.593883] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1]
<7> [175.593887] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-1]
<7> [175.598089] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-1] disconnected
<7> [175.598095] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2]
<7> [175.598098] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-2]
<7> [175.602332] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-2] disconnected
<7> [175.602338] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2]
<7> [175.602341] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-2]
<7> [175.606496] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-2] disconnected
<7> [175.606501] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3]
<7> [175.606504] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-3]
<7> [175.607918] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [175.608169] xe 0000:03:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [175.608383] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6> [175.610302] xe 0000:03:00.0: [drm] Using mailbox commands for power limits
<7> [175.610634] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-3] disconnected
<7> [175.610639] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3]
<7> [175.610642] xe 0000:03:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-3]
<7> [175.610756] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [175.610934] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [175.611040] xe 0000:03:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<6> [175.611475] xe 0000:03:00.0: [drm] PL2 is supported on channel 0
<7> [175.611510] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [175.611796] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [175.611973] xe 0000:03:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [175.614460] xe 0000:03:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
<7> [175.614875] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-3] disconnected
<7> [175.615027] check_position_fix: snd_hda_intel 0000:04:00.0: Using SKL position fix
<7> [175.615027] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4]
<7> [175.615038] xe 0000:03:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-4]
<7> [175.619346] xe 0000:03:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-4] disconnected
<7> [175.619355] xe 0000:03:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [175.619364] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-1] enabled? no
<7> [175.619368] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-1] enabled? no
<7> [175.619371] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-2] enabled? no
<7> [175.619375] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-2] enabled? no
<7> [175.619378] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-3] enabled? no
<7> [175.619382] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-3] enabled? no
<7> [175.619386] xe 0000:03:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-4] enabled? no
<7> [175.619498] xe 0000:03:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [175.619510] xe 0000:03:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [175.619560] xe 0000:03:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [175.619585] xe 0000:03:00.0: [drm] Cannot find any crtc or sizes
<7> [175.619619] xe 0000:03:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [175.619605] snd_hda_intel 0000:04:00.0: bound 0000:03:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [175.619628] xe 0000:03:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [175.620110] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7> [175.620236] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [175.620421] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [175.620565] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [175.620815] xe 0000:03:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [175.621354] xe 0000:03:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [175.621466] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [175.621626] xe 0000:03:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<6> [175.622043] xe 0000:0a:00.0: [drm] Running in SR-IOV PF mode
<7> [175.622104] xe 0000:0a:00.0: [drm:xe_device_probe_early [xe]] wedged_mode: setting mode (1) upon-critical-error
<6> [175.623017] xe 0000:0a:00.0: [drm] Found battlemage (device ID e20b) discrete display version 14.01 stepping B0
<7> [175.623028] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE G21 e20b:0000 dgfx:1 gfx:Xe2_HPG (20.01) media:Xe2_HPM (13.01) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:1
<7> [175.623140] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] Stepping = (G:A0, M:A1, B:**)
<7> [175.623237] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] SR-IOV support: yes (mode: SR-IOV PF)
<7> [175.623336] xe 0000:0a:00.0: [drm:xe_pm_init_early [xe]] d3cold: ACPI _PR3 not present
<3> [175.626649] snd_hda_intel 0000:04:00.0: Unknown capability 0
<7> [175.626664] azx_first_init: snd_hda_intel 0000:04:00.0: chipset global capabilities = 0x4101
<6> [175.626743] xe 0000:0a:00.0: [drm] VISIBLE VRAM: 0x0000004000000000, 0x0000000400000000
<7> [175.626833] azx_init_pci: snd_hda_intel 0000:04:00.0: Clearing TCSEL
<6> [175.626845] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [175.626847] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<6> [175.626849] xe 0000:0a:00.0: [drm] VRAM[0]: Actual physical size 0x0000000300000000, usable size exclude stolen 0x00000002fb800000, CPU accessible size 0x00000002fb800000
<6> [175.626851] xe 0000:0a:00.0: [drm] VRAM[0]: DPA range: [0x0000000000000000-300000000], io range: [0x0000004000000000-42fb800000]
<7> [175.626942] azx_init_pci: snd_hda_intel 0000:04:00.0: SCH snoop: Enabled
<7> [175.626989] xe 0000:0a:00.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 33554432 bytes
<7> [175.627131] xe 0000:0a:00.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1026 for south display
<7> [175.627255] xe 0000:0a:00.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7> [175.627577] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x0
<7> [175.627686] xe 0000:0a:00.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion not supported!
<7> [175.627798] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM type: GDDR
<7> [175.627921] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] DRAM channels: 6
<7> [175.628030] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num QGV points 2
<7> [175.628134] xe 0000:0a:00.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0
<7> [175.628433] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [175.628567] xe 0000:0a:00.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=19000 tRP=0 tRDPRE=0 tRAS=0 tRCD=0 tRC=0
<7> [175.628675] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 0: deratedbw=33600 peakbw: 48000
<7> [175.628780] xe 0000:0a:00.0: [drm:xe2_hpd_get_bw_info.isra.0 [xe]] QGV 1: deratedbw=53000 peakbw: 456000
<7> [175.629090] xe 0000:0a:00.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7> [175.629512] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7> [175.645672] xe 0000:0a:00.0: [drm:oprom_get_vbt [xe]] Found valid VBT in SPI flash
<7> [175.645800] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] VBT signature "$VBT BATTLEMAGE ", BDB version 257
<7> [175.645923] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7> [175.646037] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7> [175.646149] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7> [175.646320] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7> [175.646465] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 814, min size 850)
<7> [175.646589] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7> [175.646697] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7> [175.646858] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7> [175.647019] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7> [175.647141] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7> [175.647259] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7> [175.647384] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7> [175.647492] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7> [175.647595] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<7> [175.647696] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7> [175.647804] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [175.647921] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [175.648036] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d2
<7> [175.648143] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x60d6
<7> [175.648247] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7> [175.648345] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [175.648441] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port D VBT DP max link rate: 1350000
<7> [175.648537] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [175.648637] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port E VBT DP max link rate: 1000000
<7> [175.648737] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [175.648838] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 DSI:0 DP++:1 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7> [175.648944] xe 0000:0a:00.0: [drm:intel_bios_init [xe]] Port G VBT DP max link rate: 1000000
<7> [175.649045] xe 0000:0a:00.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 4000000a
<7> [175.649372] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [175.649517] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7> [175.649861] xe 0000:0a:00.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [175.650214] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [175.650461] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [175.650576] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [175.650883] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7> [175.651044] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [175.651362] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [175.651492] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [175.651599] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7> [175.651915] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [175.652021] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7> [175.652147] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [175.652250] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7> [175.652591] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating enabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0x00000000)
<7> [175.653070] xe 0000:0a:00.0: [drm:intel_dmc_init [xe]] Loading i915/bmg_dmc.bin
<7> [175.653424] xe 0000:0a:00.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7> [175.653762] xe 0000:0a:00.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 200 us
<7> [175.653886] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM0 latency 10 (10.0 usec)
<7> [175.654350] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7> [175.654501] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7> [175.654616] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7> [175.654725] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x1240108 (EVT_HTP)
<7> [175.654717] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 40 (40.0 usec)
<7> [175.654835] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f038 = 0xc003b200 (EVT_CTL)
<7> [175.654899] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 130 (130.0 usec)
<7> [175.654954] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f008 = 0x40303fe4 (EVT_HTP)
<7> [175.655061] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7> [175.655079] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 130 (130.0 usec)
<7> [175.655163] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x96fc0
<7> [175.655263] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f034 = 0xc003df00 (EVT_CTL) (disabling)
<7> [175.655244] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 250 (250.0 usec)
<7> [175.655362] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f004 = 0x22e422ac (EVT_HTP)
<7> [175.655408] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 250 (250.0 usec)
<7> [175.655460] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f038 = 0xc003e000 (EVT_CTL) (disabling)
<7> [175.655564] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f008 = 0x23d823a0 (EVT_HTP)
<7> [175.655570] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM6 latency not provided
<7> [175.655666] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f03c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [175.655729] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] original WM7 latency not provided
<7> [175.655766] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f00c = 0x25ac2494 (EVT_HTP)
<7> [175.655867] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7> [175.655887] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 10 (10.0 usec)
<7> [175.655977] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9efc0
<7> [175.656053] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 40 (40.0 usec)
<7> [175.656080] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f434 = 0xc003df00 (EVT_CTL) (disabling)
<7> [175.656190] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f404 = 0xa7dca7a4 (EVT_HTP)
<7> [175.656211] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 130 (130.0 usec)
<7> [175.656294] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f438 = 0xc003e000 (EVT_CTL) (disabling)
<7> [175.656395] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f408 = 0xa8d0a898 (EVT_HTP)
<7> [175.656368] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 130 (130.0 usec)
<7> [175.656494] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f43c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [175.656523] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 250 (250.0 usec)
<7> [175.656593] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f40c = 0xaaa4a98c (EVT_HTP)
<7> [175.656696] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7> [175.656680] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 250 (250.0 usec)
<7> [175.656793] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x53fc0
<7> [175.656836] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM6 latency not provided
<7> [175.656893] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f83c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [175.657004] xe 0000:0a:00.0: [drm:intel_print_wm_latency [xe]] adjusted WM7 latency not provided
<7> [175.657022] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f80c = 0x25202408 (EVT_HTP)
<7> [175.657304] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] DMC 4:
<7> [175.657405] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5fc74 = 0x5afc0
<7> [175.657503] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5fc3c = 0xc0032c00 (EVT_CTL) (disabling)
<7> [175.657607] xe 0000:0a:00.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5fc0c = 0x95209408 (EVT_HTP)
<7> [175.664069] xe 0000:0a:00.0: [drm:intel_crtc_init [xe]] 4 display pipes available.
<6> [175.667948] xe 0000:0a:00.0: [drm] Finished loading DMC firmware i915/bmg_dmc.bin (v2.6)
<7> [175.673584] xe 0000:0a:00.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 652800 kHz, VCO 1305600 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 3
<7> [175.673809] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7> [175.674014] xe 0000:0a:00.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7> [175.674472] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:506:DDI TC1/PHY F] Using AUX CH USBC1 (VBT)
<7> [175.674958] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:506:DDI TC1/PHY F]
<7> [175.675682] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:506:DDI TC1/PHY F]
<7> [175.675867] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:506:DDI TC1/PHY F] Using DDC pin 0x9 (VBT)
<7> [175.676444] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:525:DDI TC2/PHY G] Using AUX CH USBC2 (VBT)
<7> [175.676585] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:525:DDI TC2/PHY G]
<7> [175.676899] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:525:DDI TC2/PHY G]
<7> [175.677047] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:525:DDI TC2/PHY G] Using DDC pin 0xa (VBT)
<7> [175.677450] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:537:DDI TC3/PHY H]
<7> [175.677550] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:537:DDI TC3/PHY H] Using DDC pin 0xb (VBT)
<7> [175.677943] xe 0000:0a:00.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:541:DDI TC4/PHY I] Using AUX CH USBC4 (VBT)
<7> [175.678095] xe 0000:0a:00.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:541:DDI TC4/PHY I]
<7> [175.678382] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [175.678425] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] Adding HDMI connector on [ENCODER:541:DDI TC4/PHY I]
<7> [175.678557] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [175.678576] xe 0000:0a:00.0: [drm:intel_hdmi_init_connector [xe]] [ENCODER:541:DDI TC4/PHY I] Using DDC pin 0xc (VBT)
<7> [175.678725] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [175.678841] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7> [175.678960] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [175.679061] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [175.679086] xe 0000:0a:00.0: [drm:intel_vga_disable [xe]] VGA plane is disabled
<7> [175.679160] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [175.679258] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7> [175.679275] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] hw state readout: disabled
<7> [175.679360] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [175.679464] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [175.679565] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [175.679632] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] hw state readout: disabled
<7> [175.679663] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7> [175.679759] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [175.679788] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] hw state readout: disabled
<7> [175.679852] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [175.679967] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [175.680064] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7> [175.680144] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] hw state readout: disabled
<7> [175.680152] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [175.680239] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [175.680244] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] hw state readout: disabled, pipe A
<7> [175.680326] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [175.680410] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7> [175.680418] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] hw state readout: disabled, pipe A
<7> [175.680495] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [175.680579] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [175.680595] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] hw state readout: disabled, pipe A
<7> [175.680662] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [175.680693] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] hw state readout: disabled, pipe A
<7> [175.680756] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7> [175.680845] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [175.680940] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [175.681034] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [175.681072] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] hw state readout: disabled, pipe A
<7> [175.681129] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7> [175.681178] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] hw state readout: disabled, pipe A
<7> [175.681221] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [175.681314] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [175.681405] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [175.681467] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] hw state readout: disabled, pipe B
<7> [175.681502] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7> [175.681573] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] hw state readout: disabled, pipe B
<7> [175.681620] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [175.681754] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [175.681872] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [175.681917] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] hw state readout: disabled, pipe B
<7> [175.682053] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] hw state readout: disabled, pipe B
<7> [175.682132] xe 0000:03:00.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7> [175.682232] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] hw state readout: disabled, pipe B
<7> [175.682548] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] hw state readout: disabled, pipe B
<7> [175.682718] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [175.682701] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] hw state readout: disabled, pipe C
<7> [175.683046] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] hw state readout: disabled, pipe C
<7> [175.683199] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] hw state readout: disabled, pipe C
<7> [175.683508] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] hw state readout: disabled, pipe C
<7> [175.683648] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] hw state readout: disabled, pipe C
<7> [175.683980] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] hw state readout: disabled, pipe C
<7> [175.684330] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] hw state readout: disabled, pipe D
<7> [175.684462] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] hw state readout: disabled, pipe D
<7> [175.684780] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] hw state readout: disabled, pipe D
<7> [175.684900] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] hw state readout: disabled, pipe D
<7> [175.685226] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] hw state readout: disabled, pipe D
<7> [175.685335] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] hw state readout: disabled, pipe D
<7> [175.685438] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:506:DDI TC1/PHY F] hw state readout: disabled, pipe A
<7> [175.685532] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:508:DP-MST A] hw state readout: disabled, pipe A
<7> [175.685628] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:509:DP-MST B] hw state readout: disabled, pipe B
<7> [175.685727] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:510:DP-MST C] hw state readout: disabled, pipe C
<7> [175.685828] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:511:DP-MST D] hw state readout: disabled, pipe D
<7> [175.686138] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:525:DDI TC2/PHY G] hw state readout: disabled, pipe A
<7> [175.686237] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:527:DP-MST A] hw state readout: disabled, pipe A
<7> [175.686333] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:528:DP-MST B] hw state readout: disabled, pipe B
<7> [175.686455] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:529:DP-MST C] hw state readout: disabled, pipe C
<7> [175.686553] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:530:DP-MST D] hw state readout: disabled, pipe D
<7> [175.686848] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:537:DDI TC3/PHY H] hw state readout: disabled, pipe A
<7> [175.686979] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:541:DDI TC4/PHY I] hw state readout: disabled, pipe A
<7> [175.687075] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:543:DP-MST A] hw state readout: disabled, pipe A
<7> [175.687168] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:544:DP-MST B] hw state readout: disabled, pipe B
<7> [175.687269] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:545:DP-MST C] hw state readout: disabled, pipe C
<7> [175.687389] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:546:DP-MST D] hw state readout: disabled, pipe D
<7> [175.687511] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x0, on 0
<7> [175.687651] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [175.687764] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1
<7> [175.688076] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0
<7> [175.688205] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0
<7> [175.688523] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0
<7> [175.688819] xe 0000:0a:00.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0
<7> [175.688935] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:507:DP-4] hw state readout: disabled
<7> [175.689130] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:520:HDMI-A-5] hw state readout: disabled
<7> [175.689448] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:526:DP-5] hw state readout: disabled
<7> [175.689572] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:534:HDMI-A-6] hw state readout: disabled
<7> [175.689752] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:538:HDMI-A-7] hw state readout: disabled
<7> [175.689938] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:542:DP-6] hw state readout: disabled
<7> [175.690245] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:550:HDMI-A-8] hw state readout: disabled
<7> [175.690345] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:34:plane 1A] min_cdclk 0 kHz
<7> [175.690441] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:64:plane 2A] min_cdclk 0 kHz
<7> [175.690535] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:94:plane 3A] min_cdclk 0 kHz
<7> [175.690629] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:124:plane 4A] min_cdclk 0 kHz
<7> [175.690719] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:134:plane 5A] min_cdclk 0 kHz
<7> [175.690808] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:144:cursor A] min_cdclk 0 kHz
<7> [175.690900] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:150:pipe A] min_cdclk 0 kHz
<7> [175.691012] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:152:plane 1B] min_cdclk 0 kHz
<6> [175.691157] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input4
<7> [175.691117] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:182:plane 2B] min_cdclk 0 kHz
<7> [175.691217] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:212:plane 3B] min_cdclk 0 kHz
<7> [175.691310] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:242:plane 4B] min_cdclk 0 kHz
<7> [175.691404] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:252:plane 5B] min_cdclk 0 kHz
<7> [175.691496] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:262:cursor B] min_cdclk 0 kHz
<7> [175.691597] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:268:pipe B] min_cdclk 0 kHz
<7> [175.691747] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:270:plane 1C] min_cdclk 0 kHz
<7> [175.691865] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:300:plane 2C] min_cdclk 0 kHz
<7> [175.691974] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:330:plane 3C] min_cdclk 0 kHz
<7> [175.692070] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:360:plane 4C] min_cdclk 0 kHz
<7> [175.692163] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:370:plane 5C] min_cdclk 0 kHz
<7> [175.692254] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:380:cursor C] min_cdclk 0 kHz
<7> [175.692345] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:386:pipe C] min_cdclk 0 kHz
<7> [175.692435] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:388:plane 1D] min_cdclk 0 kHz
<7> [175.692524] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:418:plane 2D] min_cdclk 0 kHz
<6> [175.692600] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input5
<7> [175.692617] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:448:plane 3D] min_cdclk 0 kHz
<7> [175.692708] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:478:plane 4D] min_cdclk 0 kHz
<7> [175.692800] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:488:plane 5D] min_cdclk 0 kHz
<7> [175.692890] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:498:cursor D] min_cdclk 0 kHz
<7> [175.693018] xe 0000:0a:00.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:504:pipe D] min_cdclk 0 kHz
<7> [175.693332] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:150:pipe A] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [175.693471] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:268:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [175.693583] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:386:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<6> [175.693710] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input6
<7> [175.693689] xe 0000:0a:00.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:504:pipe D] dbuf slices 0x0, ddb (0 - 0), active pipes 0x0, mbus joined: no
<7> [175.693813] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 0 num active planes 0
<7> [175.693949] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7> [175.694065] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7> [175.694175] xe 0000:0a:00.0: [drm:intel_bw_update_hw_state [xe]] pipe D data rate 0 num active planes 0
<7> [175.694502] xe 0000:0a:00.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: disabled, CMTG B: n/a, Transcoder A secondary: no, Transcoder B secondary: no
<7> [175.694670] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [setup_hw_state]
<7> [175.694804] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [setup_hw_state]
<7> [175.694920] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [setup_hw_state]
<6> [175.694997] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/0000:04:00.0/sound/card0/input7
<7> [175.695044] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [setup_hw_state]
<7> [175.695149] xe 0000:0a:00.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling
<6> [175.698730] xe 0000:0a:00.0: [drm] Tile0: GT0: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [175.704028] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x006601cf
<7> [175.704152] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000
<7> [175.704246] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000
<7> [175.704328] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [175.704406] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000020c2
<7> [175.704482] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [175.704557] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [175.704630] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [175.704704] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [175.704776] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [175.704849] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [175.704930] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [175.705004] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [175.705076] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [175.705148] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [175.705275] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7> [175.715930] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [175.716753] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [175.716884] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,00000000,000fffff
<7> [175.716988] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,00000000,000fffff
<7> [175.717072] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff
<7> [175.717152] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16
<7> [175.717230] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,00ffffff
<6> [175.805096] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs2 fused off
<6> [175.805099] xe 0000:0a:00.0: [drm] Tile0: GT0: ccs3 fused off
<7> [175.805225] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine
<7> [175.805342] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x6210-0x6217]: allow rw access
<7> [175.805445] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0x62a8-0x62af]: allow rw access
<7> [175.805543] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [175.805632] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [175.805718] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [175.805835] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine
<7> [175.805958] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine
<7> [175.806101] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine
<7> [175.806187] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [175.806279] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [175.806366] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [175.806500] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs1 whitelist to engine
<7> [175.806578] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access
<7> [175.806658] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access
<7> [175.806737] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7> [175.808132] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs
<7> [175.808237] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000
<7> [175.808337] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000
<7> [175.808429] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb0c8] = 0x11111440
<7> [175.808518] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440
<7> [175.808607] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000
<7> [175.808695] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f
<7> [175.808783] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1
<7> [175.808871] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16
<7> [175.808972] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc
<7> [175.809069] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c
<7> [175.809161] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130
<7> [175.809243] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c
<7> [175.809321] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100
<7> [175.809407] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100
<7> [175.809497] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100
<7> [175.809593] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100
<7> [175.809684] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100
<7> [175.809772] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100
<7> [175.809859] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100
<7> [175.809953] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100
<7> [175.810039] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100
<7> [175.810128] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100
<7> [175.810213] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100
<7> [175.810301] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100
<7> [175.810386] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs
<7> [175.810479] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000
<7> [175.810569] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306
<7> [175.810660] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080
<7> [175.810753] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x00006210
<7> [175.810837] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x000062a8
<7> [175.810924] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x1000dafc
<7> [175.811050] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24dc] = 0x1000db01
<7> [175.811137] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24e0] = 0x0000db1c
<7> [175.811215] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040
<7> [175.811298] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200
<7> [175.811378] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000
<7> [175.811460] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x10401040
<7> [175.811549] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002
<7> [175.811647] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400
<7> [175.811752] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x04002000
<7> [175.811853] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000
<7> [175.811958] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x14800] = 0x00020002
<7> [175.812333] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs
<7> [175.812427] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000
<7> [175.812516] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306
<7> [175.812600] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080
<7> [175.812977] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs
<7> [175.813066] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000
<7> [175.813150] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306
<7> [175.813231] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080
<7> [175.813581] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs
<7> [175.813675] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000
<7> [175.813763] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0308
<7> [175.813848] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080
<7> [175.813944] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc
<7> [175.814025] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01
<7> [175.814107] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c
<7> [175.814495] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs1 save-restore MMIOs
<7> [175.814594] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c050] = 0x10001000
<7> [175.814682] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0c4] = 0x3f7e0308
<7> [175.814765] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c0d4] = 0xc080c080
<7> [175.814850] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d0] = 0x1000dafc
<7> [175.814941] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d4] = 0x1000db01
<7> [175.815024] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1c4d8] = 0x0000db1c
<7> [175.815594] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled
<7> [175.822241] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x0196f1cf
<7> [175.822344] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800
<7> [175.822428] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014
<7> [175.822507] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001
<7> [175.822584] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x00000c00
<7> [175.822661] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0xe20b0000
<7> [175.822736] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000
<7> [175.822813] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000
<7> [175.822888] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000
<7> [175.822980] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000
<7> [175.823056] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000
<7> [175.823134] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000
<7> [175.823210] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000
<7> [175.823286] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000
<7> [175.823381] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs
<7> [175.823482] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells
<7> [175.825539] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2097152 dwords at 0xe8c000 for xe_guc_buf_cache_init_with_size [xe]
<7> [175.827226] xe 0000:0a:00.0: [drm:xe_migrate_init [xe]] Migrate min chunk size is 0x00010000
<7> [175.829001] xe 0000:0a:00.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 120 ext-regs.
<7> [175.850359] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 49152)
<7> [175.861219] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 2150MHz (req = 2133MHz), before = 2150MHz, status = 0x8002F034
<7> [175.861634] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled
<7> [175.862734] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4146 dwords
<7> [175.862840] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400
<7> [175.862945] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040
<7> [175.863027] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020
<7> [175.863108] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240
<7> [175.863187] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000
<7> [175.863266] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420
<7> [175.863349] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7300] = 0x10001000
<7> [175.863435] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000
<7> [175.863520] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x3f18000|0x3f18000 (MCR)
<7> [175.866580] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords
<7> [175.866671] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606
<7> [175.866752] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [175.869489] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords
<7> [175.869582] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.01
<7> [175.873593] xe 0000:0a:00.0: [drm:xe_gt_apply_ccs_mode [xe]] Tile0: GT0: CCS_MODE=fff0fc0 config:00400000, num_engines:1, num_slices:2
<6> [175.874937] xe 0000:0a:00.0: [drm] Tile0: GT1: Using GuC firmware from xe/bmg_guc_70.bin version 70.58.0
<7> [175.878703] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x023701cf
<7> [175.878814] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [175.878905] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000
<7> [175.879007] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [175.879089] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00005ae2
<7> [175.879170] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [175.879249] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [175.879324] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [175.879400] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [175.879473] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [175.879546] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [175.879621] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [175.879692] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [175.879763] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<6> [175.880368] xe 0000:0a:00.0: [drm] Tile0: GT1: Using HuC firmware from xe/bmg_huc.bin version 8.2.10
<7> [175.880810] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] WOPCM: 4096K
<7> [175.880953] xe 0000:0a:00.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7> [175.891924] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 9ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [175.892464] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [175.892577] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000,00000000
<7> [175.892667] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000,00000000
<7> [175.892750] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 000000ff
<7> [175.892831] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16
<7> [175.892917] xe 0000:0a:00.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,00000000
<6> [175.893017] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs1 fused off
<6> [175.893018] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs3 fused off
<6> [175.893020] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs4 fused off
<6> [175.893021] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs5 fused off
<6> [175.893022] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs6 fused off
<6> [175.893023] xe 0000:0a:00.0: [drm] Tile0: GT1: vcs7 fused off
<6> [175.893024] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs2 fused off
<6> [175.893025] xe 0000:0a:00.0: [drm] Tile0: GT1: vecs3 fused off
<7> [175.893029] xe 0000:0a:00.0: [drm:xe_hw_engines_init_early [xe]] Tile0: GT1: GSC FW not used, disabling gsccs
<7> [175.893230] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine
<7> [175.893337] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [175.893444] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [175.893539] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [175.893631] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [175.893720] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [175.893815] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [175.893914] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [175.894007] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [175.894096] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [175.894275] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs2 whitelist to engine
<7> [175.894360] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [175.894455] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [175.894544] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [175.894635] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [175.894722] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [175.894808] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [175.894894] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [175.895000] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [175.895089] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [175.895281] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine
<7> [175.895371] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [175.895460] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [175.895547] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [175.895642] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [175.895734] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [175.895825] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [175.895917] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [175.896002] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [175.896088] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [175.896270] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs1 whitelist to engine
<7> [175.896353] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39319c-0x39319f]: allow read access
<7> [175.896439] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931a0-0x3931bf]: allow read access
<7> [175.896530] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3931d0-0x3931d7]: allow rw access
<7> [175.896623] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39419c-0x39419f]: allow read access
<7> [175.896711] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941a0-0x3941bf]: allow read access
<7> [175.896796] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3941d0-0x3941d7]: allow rw access
<7> [175.896883] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x39499c-0x39499f]: allow read access
<7> [175.896976] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949a0-0x3949bf]: allow read access
<7> [175.897061] xe 0000:0a:00.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: REG[0x3949d0-0x3949d7]: allow rw access
<7> [175.898311] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs
<7> [175.898423] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000
<7> [175.898526] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xc50c] = 0x00010002
<7> [175.898621] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020
<7> [175.898715] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00800008
<7> [175.898806] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f08] = 0x00000020
<7> [175.898898] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d3f1c] = 0x00800008
<7> [175.899008] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1
<7> [175.899105] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16
<7> [175.899194] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc
<7> [175.899280] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c
<7> [175.899363] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130
<7> [175.899451] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c
<7> [175.899536] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100
<7> [175.899615] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100
<7> [175.899694] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100
<7> [175.899773] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100
<7> [175.899849] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100
<7> [175.899936] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100
<7> [175.900023] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100
<7> [175.900107] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100
<7> [175.900192] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100
<7> [175.900276] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100
<7> [175.900356] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100
<7> [175.900436] xe 0000:0a:00.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100
<7> [175.900514] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs
<7> [175.900607] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000
<7> [175.900697] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000
<7> [175.900784] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d0] = 0x1039319c
<7> [175.900873] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d4] = 0x103931a1
<7> [175.900967] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04d8] = 0x003931d0
<7> [175.901052] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04dc] = 0x1039419c
<7> [175.901135] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e0] = 0x103941a1
<7> [175.901225] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e4] = 0x003941d0
<7> [175.901311] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04e8] = 0x1039499c
<7> [175.901394] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04ec] = 0x103949a1
<7> [175.901475] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c04f0] = 0x003949d0
<7> [175.901710] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs2 save-restore MMIOs
<7> [175.901799] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d0050] = 0x10001000
<7> [175.901880] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d00d4] = 0xc000c000
<7> [175.901973] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d0] = 0x1039319c
<7> [175.902053] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d4] = 0x103931a1
<7> [175.902131] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04d8] = 0x003931d0
<7> [175.902208] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04dc] = 0x1039419c
<7> [175.902287] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e0] = 0x103941a1
<7> [175.902364] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e4] = 0x003941d0
<7> [175.902439] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04e8] = 0x1039499c
<7> [175.902515] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04ec] = 0x103949a1
<7> [175.902592] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d04f0] = 0x003949d0
<7> [175.902801] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs
<7> [175.902883] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000
<7> [175.902973] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000
<7> [175.903059] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d0] = 0x1039319c
<7> [175.903140] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d4] = 0x103931a1
<7> [175.903224] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84d8] = 0x003931d0
<7> [175.903305] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84dc] = 0x1039419c
<7> [175.903384] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e0] = 0x103941a1
<7> [175.903461] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e4] = 0x003941d0
<7> [175.903546] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84e8] = 0x1039499c
<7> [175.903632] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84ec] = 0x103949a1
<7> [175.903715] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c84f0] = 0x003949d0
<7> [175.903943] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs1 save-restore MMIOs
<7> [175.904027] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d8050] = 0x10001000
<7> [175.904107] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d80d4] = 0xc000c000
<7> [175.904186] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d0] = 0x1039319c
<7> [175.904265] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d4] = 0x103931a1
<7> [175.904348] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84d8] = 0x003931d0
<7> [175.904429] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84dc] = 0x1039419c
<7> [175.904507] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e0] = 0x103941a1
<7> [175.904583] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e4] = 0x003941d0
<7> [175.904659] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84e8] = 0x1039499c
<7> [175.904736] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84ec] = 0x103949a1
<7> [175.904814] xe 0000:0a:00.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1d84f0] = 0x003949d0
<7> [175.905247] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled
<7> [175.910776] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x036561cf
<7> [175.910869] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000
<7> [175.910970] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014
<7> [175.911059] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001
<7> [175.911140] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x000046e0
<7> [175.911218] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0xe20b0000
<7> [175.911294] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000
<7> [175.911371] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000
<7> [175.911449] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000
<7> [175.911524] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000
<7> [175.911599] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000
<7> [175.911674] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000
<7> [175.911748] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000
<7> [175.911825] xe 0000:0a:00.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000
<7> [175.911933] xe 0000:0a:00.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs
<7> [175.912038] xe 0000:0a:00.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells
<7> [175.913258] xe 0000:0a:00.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2097152 dwords at 0x2bf5000 for xe_guc_buf_cache_init_with_size [xe]
<7> [175.934036] xe 0000:0a:00.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 20480 (was 49152)
<7> [175.944903] xe 0000:0a:00.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 10ms, freq = 1500MHz (req = 1500MHz), before = 1500MHz, status = 0x8002F034
<7> [175.945348] xe 0000:0a:00.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled
<7> [175.946046] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords
<7> [175.946144] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [175.948457] xe 0000:0a:00.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords
<7> [175.948560] xe 0000:0a:00.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.01
<7> [175.960951] xe 0000:0a:00.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC
<7> [175.961416] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [175.961602] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [175.961771] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<7> [175.961950] xe 0000:0a:00.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=160, pf_queue->size=131072
<5> [175.969764] Creating 4 MTD partitions on "xe.nvm.2560":
<5> [175.969786] 0x000000000000-0x000000001000 : "xe.nvm.2560.DESCRIPTOR"
<5> [175.979364] 0x000000001000-0x00000054e000 : "xe.nvm.2560.GSC"
<5> [175.988142] 0x00000054e000-0x00000074e000 : "xe.nvm.2560.OptionROM"
<5> [175.993917] 0x00000074e000-0x00000075e000 : "xe.nvm.2560.DAM"
<7> [175.999891] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [176.002223] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [176.002246] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Number of Fans: 7
<7> [176.002387] xe 0000:0a:00.0: [drm:xe_late_bind_init [xe]] Request late binding firmware xe/fan_control_8086_e20b_8086_1100.bin
<6> [176.002629] xe 0000:0a:00.0: [drm] Using fan_control firmware from xe/fan_control_8086_e20b_8086_1100.bin version 203.0.0.0
<7> [176.002677] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 ccs1
<7> [176.002794] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines:
<7> [176.002887] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0
<7> [176.003023] xe 0000:0a:00.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 3, type 1, Engines: vcs2 vecs1
<7> [176.003386] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 0: start 0x90008
<7> [176.003523] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 1: start 0x90108
<7> [176.003641] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 2: start 0x90208
<7> [176.003750] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 3: start 0x90308
<7> [176.003855] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:150:pipe A] FQ 4: start 0x903c8
<7> [176.003965] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 0: start 0x98008
<7> [176.004063] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 1: start 0x98108
<7> [176.004156] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 2: start 0x98208
<7> [176.004249] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 3: start 0x98308
<7> [176.004341] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:268:pipe B] FQ 4: start 0x983c8
<7> [176.004444] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 0: start 0x52008
<7> [176.004547] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 1: start 0x52108
<7> [176.004645] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 2: start 0x52208
<7> [176.004742] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 3: start 0x52308
<7> [176.004837] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:386:pipe C] FQ 4: start 0x523c8
<7> [176.004937] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 0: start 0x59008
<7> [176.005025] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [176.005028] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 1: start 0x59108
<7> [176.005119] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 2: start 0x59208
<7> [176.005214] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 3: start 0x59308
<7> [176.005317] xe 0000:0a:00.0: [drm:intel_flipq_init [xe]] [CRTC:504:pipe D] FQ 4: start 0x593c8
<7> [176.005592] xe 0000:0a:00.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? no->no
<7> [176.005726] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 33600 required 0 qgv_peak_bw: 48000
<7> [176.005851] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 53000 required 0 qgv_peak_bw: 48000
<7> [176.005979] xe 0000:0a:00.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 48000 for required data rate: 0
<7> [176.006123] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:150:pipe A] enable: no [fastset]
<7> [176.006242] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:268:pipe B] enable: no [fastset]
<7> [176.006351] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:386:pipe C] enable: no [fastset]
<7> [176.006456] xe 0000:0a:00.0: [drm:intel_crtc_state_dump [xe]] [CRTC:504:pipe D] enable: no [fastset]
<7> [176.007078] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff30f2 0x28d32a71)
<7> [176.007452] xe 0000:0a:00.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<6> [176.007736] mei_lb xe.mei-gscfi.2560-e2c2afa2-3817-4d19-9d95-06b16b588a5d: bound 0000:0a:00.0 (ops xe_late_bind_component_ops [xe])
<7> [176.007823] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:150:pipe A]
<7> [176.008177] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:268:pipe B]
<7> [176.008377] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [176.008429] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:386:pipe C]
<7> [176.009056] xe 0000:0a:00.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:504:pipe D]
<7> [176.009421] xe 0000:0a:00.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1e03010 0x28d00071)
<7> [176.012532] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:507:DP-4] adding connector to sysfs
<7> [176.013096] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY F bus for card1-DP-4
<7> [176.014229] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:507:DP-4] generating connector hotplug event
<7> [176.014279] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:520:HDMI-A-5] adding connector to sysfs
<7> [176.014611] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:520:HDMI-A-5] generating connector hotplug event
<7> [176.014646] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:526:DP-5] adding connector to sysfs
<7> [176.015409] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY G bus for card1-DP-5
<7> [176.017348] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:526:DP-5] generating connector hotplug event
<7> [176.017421] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:534:HDMI-A-6] adding connector to sysfs
<7> [176.017875] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:534:HDMI-A-6] generating connector hotplug event
<7> [176.017960] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:538:HDMI-A-7] adding connector to sysfs
<7> [176.018507] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:538:HDMI-A-7] generating connector hotplug event
<7> [176.018614] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:542:DP-6] adding connector to sysfs
<7> [176.019655] xe 0000:0a:00.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC4/DDI TC4/PHY I bus for card1-DP-6
<7> [176.020730] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:542:DP-6] generating connector hotplug event
<7> [176.020795] xe 0000:0a:00.0: [drm:drm_sysfs_connector_add] [CONNECTOR:550:HDMI-A-8] adding connector to sysfs
<7> [176.021234] xe 0000:0a:00.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:550:HDMI-A-8] generating connector hotplug event
<6> [176.021285] [drm] Initialized xe 1.1.0 for 0000:0a:00.0 on minor 1
<7> [176.021378] xe 0000:0a:00.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7> [176.021582] xe 0000:0a:00.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=1632
<7> [176.023568] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:150:pipe A] not active, skipping
<7> [176.023740] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:268:pipe B] not active, skipping
<7> [176.023902] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:386:pipe C] not active, skipping
<7> [176.024225] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [176.025074] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] [CRTC:504:pipe D] not active, skipping
<7> [176.025248] xe 0000:0a:00.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7> [176.025561] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [176.028500] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:507:DP-4] status updated from unknown to disconnected (epoch counter 0->1)
<7> [176.028692] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [176.032899] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:520:HDMI-A-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [176.033080] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [176.037333] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:526:DP-5] status updated from unknown to disconnected (epoch counter 0->1)
<7> [176.037518] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [176.041983] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:534:HDMI-A-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [176.042169] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<7> [176.046368] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:538:HDMI-A-7] status updated from unknown to disconnected (epoch counter 0->1)
<7> [176.046549] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<7> [176.050761] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:542:DP-6] status updated from unknown to disconnected (epoch counter 0->1)
<7> [176.050940] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [176.055127] xe 0000:0a:00.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:550:HDMI-A-8] status updated from unknown to disconnected (epoch counter 0->1)
<7> [176.055623] xe 0000:0a:00.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7> [176.056040] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4]
<7> [176.056051] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [176.060303] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4] disconnected
<7> [176.060314] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5]
<7> [176.060319] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [176.064621] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5] disconnected
<7> [176.064629] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5]
<7> [176.064634] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [176.068942] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5] disconnected
<7> [176.068952] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6]
<7> [176.068958] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [176.073279] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6] disconnected
<7> [176.073284] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7]
<7> [176.073287] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<7> [176.077491] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7] disconnected
<7> [176.077495] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6]
<7> [176.077499] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<7> [176.081748] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6] disconnected
<7> [176.081757] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8]
<7> [176.081761] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [176.086039] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8] disconnected
<7> [176.086045] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [176.086049] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-4] enabled? no
<7> [176.086052] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-5] enabled? no
<7> [176.086054] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-5] enabled? no
<7> [176.086057] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-6] enabled? no
<7> [176.086060] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-7] enabled? no
<7> [176.086062] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-6] enabled? no
<7> [176.086065] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-8] enabled? no
<7> [176.086090] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [176.086099] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [176.086155] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [176.086162] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [176.087289] xe 0000:0a:00.0: [drm:drm_client_modeset_probe]
<7> [176.087220] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 14.01
<7> [176.087418] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7> [176.087596] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7> [176.087761] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7> [176.087855] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4]
<7> [176.087936] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7> [176.087868] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:507:DP-4]
<7> [176.088107] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7> [176.088266] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7> [176.088444] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7> [176.088796] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7> [176.089221] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7> [176.089580] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7> [176.089859] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7> [176.090243] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7> [176.090442] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7> [176.090619] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7> [176.090801] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7> [176.090994] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7> [176.091180] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7> [176.091354] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7> [176.091519] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7> [176.091680] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7> [176.091850] xe 0000:0a:00.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7> [176.092361] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:507:DP-4] disconnected
<7> [176.092378] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5]
<7> [176.092386] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:520:HDMI-A-5]
<7> [176.097029] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:520:HDMI-A-5] disconnected
<7> [176.097039] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5]
<7> [176.097045] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:526:DP-5]
<7> [176.101542] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:526:DP-5] disconnected
<7> [176.101549] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6]
<7> [176.101554] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:534:HDMI-A-6]
<7> [176.105839] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:534:HDMI-A-6] disconnected
<7> [176.105846] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7]
<7> [176.105850] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:538:HDMI-A-7]
<7> [176.105974] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware
<7> [176.110098] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:538:HDMI-A-7] disconnected
<7> [176.110104] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6]
<7> [176.110108] xe 0000:0a:00.0: [drm:intel_dp_detect [xe]] [CONNECTOR:542:DP-6]
<6> [176.113121] xe 0000:0a:00.0: [drm] Using mailbox commands for power limits
<7> [176.113647] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal info read val 0x3c78647d val1 0x69
<7> [176.113812] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] thermal config count 0x9
<7> [176.113935] xe 0000:0a:00.0: [drm:xe_hwmon_register [xe]] Register xe hwmon interface
<7> [176.114044] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [176.114192] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x1 (CLKGATE_DIS_DSSDSC=0x02000000)
<6> [176.114400] xe 0000:0a:00.0: [drm] PL2 is supported on channel 0
<7> [176.114358] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7> [176.114444] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 0
<7> [176.114561] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x2 (CLKGATE_DIS_DSSDSC=0x0a000000)
<7> [176.114719] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL2 is unsupported on channel 1
<7> [176.114747] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7> [176.114903] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x4 (CLKGATE_DIS_DSSDSC=0x2a000000)
<7> [176.114937] xe 0000:0a:00.0: [drm:xe_hwmon_is_visible [xe]] PL1 is unsupported on channel 1
<7> [176.115140] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7> [176.115296] xe 0000:0a:00.0: [drm:dss_pipe_gating_enable_disable [xe]] DSS clock gating disabled for pipe_mask=0x8 (CLKGATE_DIS_DSSDSC=0xaa000000)
<7> [176.115529] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7> [176.115732] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [176.115979] xe 0000:0a:00.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [176.116138] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [176.116668] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:542:DP-6] disconnected
<7> [176.116675] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8]
<7> [176.116679] xe 0000:0a:00.0: [drm:intel_hdmi_detect [xe]] [CONNECTOR:550:HDMI-A-8]
<7> [176.117970] check_position_fix: snd_hda_intel 0000:0b:00.0: Using SKL position fix
<7> [176.121037] xe 0000:0a:00.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:550:HDMI-A-8] disconnected
<7> [176.121046] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] No connectors reported connected with modes
<7> [176.121055] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:507:DP-4] enabled? no
<7> [176.121058] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:520:HDMI-A-5] enabled? no
<7> [176.121061] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:526:DP-5] enabled? no
<7> [176.121064] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:534:HDMI-A-6] enabled? no
<7> [176.121067] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:538:HDMI-A-7] enabled? no
<7> [176.121070] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:542:DP-6] enabled? no
<7> [176.121072] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] [CONNECTOR:550:HDMI-A-8] enabled? no
<7> [176.121206] xe 0000:0a:00.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7> [176.121224] xe 0000:0a:00.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7> [176.121289] xe 0000:0a:00.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
<6> [176.121301] xe 0000:0a:00.0: [drm] Cannot find any crtc or sizes
<7> [176.121334] xe 0000:0a:00.0: [drm:drm_client_hotplug] fbdev: ret=0
<6> [176.121268] snd_hda_intel 0000:0b:00.0: bound 0000:0a:00.0 (ops intel_audio_component_bind_ops [xe])
<7> [176.121472] xe 0000:0a:00.0: [drm:intel_power_well_disable [xe]] disabling always-on
<7> [176.121778] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [176.122031] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [176.123054] xe 0000:0a:00.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [176.123310] xe 0000:0a:00.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7> [176.123763] xe 0000:0a:00.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7> [176.126642] xe 0000:0a:00.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<3> [176.131054] snd_hda_intel 0000:0b:00.0: Unknown capability 0
<7> [176.144437] xe 0000:03:00.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [176.144504] [IGT] xe_module_load: finished subtest load, SUCCESS
<6> [176.144695] [IGT] xe_module_load: exiting, ret=0
<7> [176.147262] xe 0000:0a:00.0: [drm:xe_late_bind_work [xe]] Load fan_control firmware successful
Created at 2026-03-03 22:16:25