Results for igt@xe_pm@s4-d3cold-basic-exec

Result: Skip

i915_display_info6 igt_runner6 results6.json results6-xe-load.json i915_display_info_post_exec6 boot6 dmesg6

DetailValue
Duration 0.42 seconds
Hostname 
shard-lnl-8
Igt-Version 
IGT-Version: 2.2-gdf2a5f148 (x86_64) (Linux: 6.18.0-lgci-xe-xe-4193-2d16d4e1aef3cb501+ x86_64)
Out 
Using IGT_SRANDOM=1764830682 for randomisation
Opened device: /dev/dri/card0
Starting subtest: s4-d3cold-basic-exec
Test requirement not met in function setup_d3, file ../tests/intel/xe_pm.c:176:
Test requirement: igt_pm_acpi_d3cold_supported(device.pci_root)
Last errno: 2, No such file or directory
Subtest s4-d3cold-basic-exec: SKIP (0.418s)
Err 
Starting subtest: s4-d3cold-basic-exec
Subtest s4-d3cold-basic-exec: SKIP (0.418s)
Dmesg
<6> [87.690257] Console: switching to colour dummy device 80x25
<6> [87.690298] [IGT] xe_pm: executing
<6> [88.731938] [IGT] xe_pm: starting subtest s4-d3cold-basic-exec
<7> [88.733099] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:211:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [88.733445] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:210:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [88.733774] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [88.734078] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [88.734361] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:210:DDI A/PHY A] [CRTC:89:pipe A]
<7> [88.734650] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [88.734913] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset
<7> [88.735165] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:89:pipe A] releasing DPLL 0
<7> [88.735528] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [88.735816] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:89:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [88.736199] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:211:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [88.736506] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:210:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [88.736754] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [88.737001] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [88.737252] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:210:DDI A/PHY A] [CRTC:89:pipe A]
<7> [88.737564] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [88.737830] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset
<7> [88.738088] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:89:pipe A] releasing DPLL 0
<7> [88.738464] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:211:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [88.738787] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:210:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [88.739061] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [88.739329] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [88.739611] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:210:DDI A/PHY A] [CRTC:89:pipe A]
<7> [88.739925] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected yes, found no)
<7> [88.740179] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset
<7> [88.740426] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:89:pipe A] releasing DPLL 0
<7> [88.740843] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0x1 (total dbuf slices 0xf), mbus joined? yes->no
<7> [88.741062] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:89:pipe A] dbuf slices 0xf -> 0x0, ddb (0 - 4096) -> (0 - 0), active pipes 0x1 -> 0x0
<7> [88.741322] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 4051) -> ( 0 - 0), size 4051 -> 0
<7> [88.741555] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb (4051 - 4096) -> ( 0 - 0), size 45 -> 0
<7> [88.741765] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7> [88.741959] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [88.742155] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [88.742353] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7> [88.742607] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:89:pipe A] data rate 0 num active planes 0
<7> [88.742846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 0 qgv_peak_bw: 38400
<7> [88.743076] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 0 qgv_peak_bw: 38400
<7> [88.743347] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [88.743597] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 0 qgv_peak_bw: 38400
<7> [88.743852] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 0
<7> [88.744107] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 21732 kHz -> 0 kHz
<7> [88.744314] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [88.744545] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 153600 kHz
<7> [88.744739] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [88.744971] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:89:pipe A] allocated DPLL 0
<7> [88.745192] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0
<7> [88.745388] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [modeset]
<7> [88.745596] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: no, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [88.745802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [88.745980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [88.746148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [88.746311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [88.746480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [88.746660] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [88.746821] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [88.746966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [88.747107] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [88.747247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [88.747382] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [88.747535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [88.747670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [88.747798] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [88.747921] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [88.748044] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [88.748162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [88.748279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [88.748395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [88.748528] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [88.748642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [88.748751] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [88.748856] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [88.748962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [88.749068] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [88.749172] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [88.749273] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [88.749373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [88.749482] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [88.749582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [88.749679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [88.749771] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [88.749861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [88.749950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [88.750037] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [88.750123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [88.750207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [88.750291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [88.750373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [88.750492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [88.750584] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [88.750669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [88.750750] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [88.750830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [88.750908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [88.750986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [88.751062] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [88.751135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [88.751210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [88.751283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [88.751355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [88.751424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [88.751511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [88.751600] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [88.751692] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [88.751783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:212] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: no
<7> [88.751876] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [88.751967] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [88.752058] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [88.752130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [88.752199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [88.752268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [88.752399] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [88.753144] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [88.753302] xe 0000:00:02.0: [drm:intel_psr_disable_locked [xe]] Disabling PSR2
<7> [88.753512] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on
<7> [88.753651] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7> [88.754272] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM
<7> [88.754376] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7> [88.956808] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 0
<7> [88.957349] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7> [88.977896] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power off
<7> [88.978217] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power off time
<7> [88.978553] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7> [88.978342] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [89.031226] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7> [89.036578] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [89.036964] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A]
<7> [89.037008] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A]
<7> [89.037421] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A]
<7> [89.038241] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0
<7> [89.038720] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7> [89.039238] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:210:DDI A/PHY A]
<7> [89.039618] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DDI TC1/PHY TC1]
<7> [89.039960] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST A]
<7> [89.040327] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:222:DP-MST B]
<7> [89.040664] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:223:DP-MST C]
<7> [89.040960] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:231:DDI TC2/PHY TC2]
<7> [89.041246] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DP-MST A]
<7> [89.041542] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:234:DP-MST B]
<7> [89.041848] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST C]
<7> [89.042150] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:239:DDI TC3/PHY TC3]
<7> [89.042448] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:241:DP-MST A]
<7> [89.042785] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:242:DP-MST B]
<7> [89.043138] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:243:DP-MST C]
<7> [89.043513] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [89.043862] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: yes -> no (pipe: *)
<7> [89.044217] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0x1
<7> [89.044741] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_A
<7> [89.045225] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:211:eDP-1]
<7> [89.045617] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:89:pipe A]
<7> [89.045985] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Post changing CDCLK to 153600 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [89.046392] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [89.046808] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=384
<7> [89.065425] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [89.065581] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [89.065937] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [89.065954] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [89.066255] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7> [89.066397] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A]
<7> [89.066641] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling always-on
<6> [89.150094] [IGT] xe_pm: finished subtest s4-d3cold-basic-exec, SKIP
<7> [89.169222] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7> [89.169723] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1]
<7> [89.170119] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [89.170428] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2]
<7> [89.170797] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [89.171069] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3]
<7> [89.171389] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4
<7> [89.172765] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:211:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7> [89.173186] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:210:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7> [89.173573] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7> [89.173977] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7> [89.174357] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:210:DDI A/PHY A] [CRTC:89:pipe A]
<7> [89.174795] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in hw.active (expected no, found yes)
<7> [89.175236] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset
<7> [89.175647] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:89:pipe A] releasing DPLL 0
<7> [89.176196] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0x1 -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7> [89.176523] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:89:pipe A] dbuf slices 0x0 -> 0xf, ddb (0 - 0) -> (0 - 4096), active pipes 0x0 -> 0x1
<7> [89.176896] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051
<7> [89.177265] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45
<7> [89.177590] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7> [89.177922] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0
<7> [89.178253] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87
<7> [89.178541] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88
<7> [89.178939] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:89:pipe A] data rate 1390840 num active planes 1
<7> [89.179343] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7> [89.179792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7> [89.180177] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [89.180626] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7> [89.181023] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7> [89.181454] xe 0000:00:02.0: [drm:intel_cdclk_update_dbuf_bw_min_cdclk [xe]] dbuf bandwidth min cdclk: 0 kHz -> 21732 kHz
<7> [89.181941] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] Can change cdclk via squashing
<7> [89.182349] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New cdclk calculated to be logical 192000 kHz, actual 192000 kHz
<7> [89.182748] xe 0000:00:02.0: [drm:intel_cdclk_atomic_check [xe]] New voltage level calculated to be logical 0, actual 0
<7> [89.183221] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:89:pipe A] allocated DPLL 0
<7> [89.183629] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0
<7> [89.183982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [modeset]
<7> [89.184331] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7> [89.184661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7> [89.185002] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7> [89.185296] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7> [89.185591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7> [89.185867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7> [89.186130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7> [89.186429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7> [89.186865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7> [89.187100] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7> [89.187333] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7> [89.187577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7> [89.187794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7> [89.188000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7> [89.188200] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7> [89.188393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7> [89.188587] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7> [89.188763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7> [89.188936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7> [89.189133] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7> [89.189316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0
<7> [89.189477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97
<7> [89.189658] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906
<7> [89.189831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [89.189978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7> [89.190123] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [89.190264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7> [89.190401] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7> [89.190535] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855
<7> [89.190706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7> [89.190834] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7> [89.190956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7> [89.191079] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7> [89.191198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no
<7> [89.191314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no,
<7> [89.191430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1.
<7> [89.191548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state:
<7> [89.191683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21
<7> [89.191809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7> [89.191935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7> [89.192049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7> [89.192152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7> [89.192253] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7> [89.192353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7> [89.192451] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7> [89.192548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7> [89.192663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [89.192762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [89.192857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7> [89.192950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7> [89.193041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7> [89.193132] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [89.193220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [89.193306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7> [89.193392] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7> [89.193476] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0
<7> [89.193568] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:212] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7> [89.193671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7> [89.193776] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7> [89.193868] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no
<7> [89.193944] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no
<7> [89.194019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no
<7> [89.194093] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no
<7> [89.194166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no
<7> [89.194303] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7> [89.194560] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7> [89.194717] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7> [89.194882] xe 0000:00:02.0: [drm:intel_set_cdclk [xe]] Pre changing CDCLK to 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7> [89.194968] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 4 (mbus joined: no)
<7> [89.195048] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7> [89.195128] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:210:DDI A/PHY A]
<7> [89.195200] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DDI TC1/PHY TC1]
<7> [89.195270] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST A]
<7> [89.195340] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:222:DP-MST B]
<7> [89.195409] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:223:DP-MST C]
<7> [89.195478] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:231:DDI TC2/PHY TC2]
<7> [89.195546] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DP-MST A]
<7> [89.195644] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:234:DP-MST B]
<7> [89.195733] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST C]
<7> [89.195819] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:239:DDI TC3/PHY TC3]
<7> [89.195902] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:241:DP-MST A]
<7> [89.195987] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:242:DP-MST B]
<7> [89.196061] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:243:DP-MST C]
<7> [89.196152] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7> [89.196302] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: *)
<7> [89.196366] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7> [89.196464] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7> [89.197705] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A]
<7> [89.197833] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0
<7> [89.199073] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power on
<7> [89.199156] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power cycle (338 ms remaining)
<7> [89.540806] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7> [89.652248] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [89.652560] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power on
<7> [89.652904] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7> [89.689345] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7> [89.689884] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7> [89.690561] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A]
<7> [89.864738] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7> [89.865083] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on
<7> [89.865366] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7> [89.867571] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7> [89.868862] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Reloading eDP link rates
<7> [89.869594] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7> [89.870758] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7> [89.871923] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7> [89.873049] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Clock recovery OK
<7> [89.873418] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7> [89.875117] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7> [89.875524] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7> [89.876333] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7> [89.876792] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7> [89.877116] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7> [89.877456] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 13892
<7> [89.893695] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7> [89.895335] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:211:eDP-1]
<7> [89.895769] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:89:pipe A]
<7> [89.898916] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<6> [89.899122] [IGT] xe_pm: exiting, ret=77
<6> [89.910521] Console: switching to colour frame buffer device 180x56
<7> [89.944710] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7> [89.945259] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7> [89.945762] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
Created at 2025-12-04 07:18:23