<5>[ 0.000000] Linux version 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Nov 28 11:26:07 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem265: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem267: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000377] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000378] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004875] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004883] e820: update [mem 0x68ff8000-0x68ff8fff] usable ==> reserved <6>[ 0.004900] Using GB pages for direct mapping <6>[ 0.005531] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005532] printk: early log buf free: 258816(98%) <6>[ 0.005533] Secure boot disabled <6>[ 0.005534] ACPI: Early table checksum verification disabled <6>[ 0.005537] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005540] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005544] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005547] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005549] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005550] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005552] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005553] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005554] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005556] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005557] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005559] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005560] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005561] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005563] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005564] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005565] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005567] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005568] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005569] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005571] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005572] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005573] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005575] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005576] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005577] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005579] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005580] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005581] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005584] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005585] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005587] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005588] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005589] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005590] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005592] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005593] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005594] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005596] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005597] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005598] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005600] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005601] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005602] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005604] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005605] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005606] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005608] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005609] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005610] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005611] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005611] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005612] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005613] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005614] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005614] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005614] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005615] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005615] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005615] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005615] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005616] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005617] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005617] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005617] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005617] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005618] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005618] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005618] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005620] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005620] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005621] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005621] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005622] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005622] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005623] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005624] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005624] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005625] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005694] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005895] No NUMA configuration found <6>[ 0.005896] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005901] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006016] Zone ranges: <6>[ 0.006016] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006017] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006018] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006019] Device empty <6>[ 0.006019] Movable zone start for each node <6>[ 0.006020] Early memory node ranges <6>[ 0.006020] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006021] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006021] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006022] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006023] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006028] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006042] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007641] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035464] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035472] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.035964] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.035970] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036021] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036023] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036024] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036026] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036027] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036038] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036045] TSC deadline timer available <6>[ 0.036047] CPU topo: Max. logical packages: 1 <6>[ 0.036047] CPU topo: Max. logical dies: 1 <6>[ 0.036047] CPU topo: Max. dies per package: 1 <6>[ 0.036049] CPU topo: Max. threads per core: 1 <6>[ 0.036049] CPU topo: Num. cores per package: 8 <6>[ 0.036049] CPU topo: Num. threads per package: 8 <6>[ 0.036050] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036061] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036062] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036063] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.036064] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036065] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036066] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036067] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036068] Booting paravirtualized kernel on bare hardware <6>[ 0.036070] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036078] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036414] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.036418] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036420] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036434] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036531] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036549] random: crng init done <6>[ 0.038374] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039283] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039345] software IO TLB: area num 8. <6>[ 0.046705] Fallback order for Node 0: 0 <6>[ 0.046709] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046709] Policy zone: Normal <6>[ 0.046719] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046719] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046722] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047639] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.079311] ********************************************************** <4>[ 0.079312] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079312] ** ** <4>[ 0.079312] ** This system shows unhashed kernel memory addresses ** <4>[ 0.079313] ** via the console, logs, and other interfaces. This ** <4>[ 0.079313] ** might reduce the security of your system. ** <4>[ 0.079313] ** ** <4>[ 0.079313] ** If you see this message and you are not debugging ** <4>[ 0.079313] ** the kernel, report this immediately to your system ** <4>[ 0.079313] ** administrator! ** <4>[ 0.079314] ** ** <4>[ 0.079314] ** Use hash_pointers=always to force this mode off ** <4>[ 0.079314] ** ** <4>[ 0.079314] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.079314] ********************************************************** <6>[ 0.080436] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.088689] ftrace: allocating 60622 entries in 240 pages <6>[ 0.088690] ftrace: allocated 240 pages with 4 groups <6>[ 0.090120] Dynamic Preempt: voluntary <6>[ 0.090617] Running RCU self tests <6>[ 0.090618] Running RCU synchronous self tests <6>[ 0.090618] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.090619] rcu: RCU lockdep checking is enabled. <6>[ 0.090619] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.090620] Trampoline variant of Tasks RCU enabled. <6>[ 0.090620] Rude variant of Tasks RCU enabled. <6>[ 0.090620] Tracing variant of Tasks RCU enabled. <6>[ 0.090620] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.090621] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.090686] Running RCU synchronous self tests <6>[ 0.090689] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090692] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.090695] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.100982] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.101451] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.101870] Console: colour dummy device 80x25 <6>[ 0.101879] printk: legacy console [tty0] enabled <6>[ 0.103002] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.103010] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.103013] ... MAX_LOCK_DEPTH: 48 <6>[ 0.103017] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.103020] ... CLASSHASH_SIZE: 4096 <6>[ 0.103024] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.103028] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.103031] ... CHAINHASH_SIZE: 262144 <6>[ 0.103035] memory used by lock dependency info: 54145 kB <6>[ 0.103039] memory used for stack traces: 4224 kB <6>[ 0.103043] per task-struct memory footprint: 1920 bytes <6>[ 0.103093] ACPI: Core revision 20250807 <6>[ 0.103979] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.104043] APIC: Switch to symmetric I/O mode setup <6>[ 0.104049] DMAR: Host address width 38 <6>[ 0.104052] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.104081] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104111] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.104131] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.104157] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.104178] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.104212] DMAR: SATC flags: 0x1 <6>[ 0.104222] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.104227] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.104231] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.106274] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.111275] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.111293] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.111368] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.111374] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.111549] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.111554] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.111563] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.111574] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.111582] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.111587] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.111592] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.111601] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.111618] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.111625] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.111630] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.111635] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.111642] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.111648] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.111656] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.111661] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.111667] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.111672] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.111678] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.112288] Freeing SMP alternatives memory: 56K <6>[ 0.112288] pid_max: default: 32768 minimum: 301 <6>[ 0.112288] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.112288] landlock: Up and running. <6>[ 0.112288] Yama: becoming mindful. <6>[ 0.112288] AppArmor: AppArmor initialized <6>[ 0.112288] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112288] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.112288] Running RCU synchronous self tests <6>[ 0.112288] Running RCU synchronous self tests <6>[ 0.112288] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.112288] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.112288] core: cpu_core PMU driver: <6>[ 0.112288] ... version: 6 <6>[ 0.112288] ... bit width: 48 <6>[ 0.112288] ... generic counters: 10 <6>[ 0.112288] ... generic bitmap: 00000000000003ff <6>[ 0.112288] ... fixed-purpose counters: 4 <6>[ 0.112288] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.112288] ... value mask: 0000ffffffffffff <6>[ 0.112288] ... max period: 00007fffffffffff <6>[ 0.112288] ... global_ctrl mask: 0001000f000003ff <6>[ 0.112349] signal: max sigframe size: 3632 <6>[ 0.112374] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.112473] rcu: Hierarchical SRCU implementation. <6>[ 0.112478] rcu: Max phase no-delay instances is 400. <6>[ 0.112623] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.114569] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.114845] smp: Bringing up secondary CPUs ... <6>[ 0.115200] smpboot: x86: Booting SMP configuration: <6>[ 0.115207] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010651] core: cpu_atom PMU driver: <6>[ 0.010651] ... version: 6 <6>[ 0.010651] ... bit width: 48 <6>[ 0.010651] ... generic counters: 8 <6>[ 0.010651] ... generic bitmap: 00000000000000ff <6>[ 0.010651] ... fixed-purpose counters: 6 <6>[ 0.010651] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010651] ... value mask: 0000ffffffffffff <6>[ 0.010651] ... max period: 00007fffffffffff <6>[ 0.010651] ... global_ctrl mask: 00000077000000ff <6>[ 0.127440] smp: Brought up 1 node, 8 CPUs <6>[ 0.127757] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.129429] Memory: 32358404K/33158528K available (25429K kernel code, 5652K rwdata, 9544K rodata, 5704K init, 68232K bss, 777192K reserved, 0K cma-reserved) <6>[ 0.129908] devtmpfs: initialized <6>[ 0.130563] x86/mm: Memory block size: 128MB <6>[ 0.151367] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.151858] Running RCU synchronous self tests <6>[ 0.151871] Running RCU synchronous self tests <6>[ 0.152369] Running RCU Tasks wait API self tests <6>[ 0.153356] Running RCU Tasks Rude wait API self tests <6>[ 0.153356] Running RCU Tasks Trace wait API self tests <6>[ 0.166350] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.166780] posixtimers hash table entries: 4096 (order: 7, 294912 bytes, linear) <6>[ 0.166972] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.168097] pinctrl core: initialized pinctrl subsystem <6>[ 0.169832] PM: RTC time: 15:15:16, date: 2025-11-28 <6>[ 0.171628] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.174109] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.174604] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.175062] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.175202] audit: initializing netlink subsys (disabled) <5>[ 0.175645] audit: type=2000 audit(1764342915.064:1): state=initialized audit_enabled=0 res=1 <6>[ 0.177665] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.177669] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.177685] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.177699] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.177713] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.177803] cpuidle: using governor ladder <6>[ 0.177803] cpuidle: using governor menu <6>[ 0.178462] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.179642] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.179706] PCI: Using configuration type 1 for base access <6>[ 0.180031] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.183369] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.183386] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.183401] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.183417] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.185326] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.190771] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.190787] raid6: using avx2x2 recovery algorithm <6>[ 0.192021] fbcon: Taking over console <6>[ 0.192307] ACPI: Added _OSI(Module Device) <6>[ 0.192319] ACPI: Added _OSI(Processor Device) <6>[ 0.192330] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.757120] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.800284] ACPI: EC: EC started <6>[ 0.800290] ACPI: EC: interrupt blocked <6>[ 0.807431] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.807445] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.897412] Callback from call_rcu_tasks() invoked. <6>[ 1.109135] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.109148] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.187024] ACPI: Interpreter enabled <6>[ 1.187277] ACPI: PM: (supports S0 S4 S5) <6>[ 1.187290] ACPI: Using IOAPIC for interrupt routing <6>[ 1.202277] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.202291] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.261744] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.261824] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.340120] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.340420] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.343580] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.707091] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.742791] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.921113] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.922858] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.930994] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.940528] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.940794] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.941057] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.189313] ACPI: \_TZ_.FN00: New power resource <6>[ 2.191221] ACPI: \_TZ_.FN01: New power resource <6>[ 2.192748] ACPI: \_TZ_.FN02: New power resource <6>[ 2.194248] ACPI: \_TZ_.FN03: New power resource <6>[ 2.196111] ACPI: \_TZ_.FN04: New power resource <6>[ 2.200191] ACPI: \PIN_: New power resource <6>[ 2.210367] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.210436] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.218772] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.245699] PCI host bridge to bus 0000:00 <6>[ 2.245785] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.245807] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.245826] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.245847] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.245868] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.245891] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.254692] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.256253] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.256390] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.256412] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.256434] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.256522] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.260351] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.260422] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.264352] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.264424] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.264445] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.267217] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.267297] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.267324] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.267362] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.267579] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.267720] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.280428] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.280509] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.280536] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.280574] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.280788] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.280908] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.293566] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.293645] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.293670] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.293707] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.293918] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.294040] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.311157] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.311252] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.311290] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.311934] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.312007] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.312028] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.313338] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.313442] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.313586] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.318401] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.318515] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.318539] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.318678] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.318688] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.321288] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.321288] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.321288] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.321288] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.321288] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.326245] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.326367] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.326520] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.334192] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.334355] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.334546] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.336298] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.336298] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.336334] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.342015] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.342131] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.342151] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.342878] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.343154] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.358250] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.358469] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.382652] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.383005] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.407331] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.407560] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.423174] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.423339] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.423533] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.429802] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.429880] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.429900] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.429919] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.430153] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.430285] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.444092] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.444230] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.444286] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.444771] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.445061] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.459717] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.464133] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.464363] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.464400] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.464641] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.465947] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.466129] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.466158] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.470110] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.470468] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.471681] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.472132] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.472566] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.473024] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.473145] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.473167] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.473187] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.473468] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.473479] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.475195] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.477755] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.481300] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.481300] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.481302] pci 0000:80:00.0: 15.753 Gb/s available PCIe bandwidth, limited by 16.0 GT/s PCIe x1 link at 0000:00:1c.4 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link) <6>[ 2.484236] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.484377] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.968962] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 12.704262] Low-power S0 idle used by default for system suspend <6>[ 12.757832] ACPI: EC: interrupt unblocked <6>[ 12.757843] ACPI: EC: event unblocked <6>[ 12.757879] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 12.757885] ACPI: EC: GPE=0x6e <6>[ 12.757890] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 12.757899] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 12.758644] iommu: Default domain type: Translated <6>[ 12.758644] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 12.764244] SCSI subsystem initialized <7>[ 12.764449] libata version 3.00 loaded. <6>[ 12.764792] ACPI: bus type USB registered <6>[ 12.765304] usbcore: registered new interface driver usbfs <6>[ 12.765442] usbcore: registered new interface driver hub <6>[ 12.765570] usbcore: registered new device driver usb <6>[ 12.765960] pps_core: LinuxPPS API ver. 1 registered <6>[ 12.765972] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 12.766038] PTP clock support registered <6>[ 12.766400] EDAC MC: Ver: 3.0.0 <6>[ 12.769477] efivars: Registered efivars operations <6>[ 12.772908] NetLabel: Initializing <6>[ 12.772918] NetLabel: domain hash size = 128 <6>[ 12.772928] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 12.773093] NetLabel: unlabeled traffic allowed by default <6>[ 12.773132] mctp: management component transport protocol core <6>[ 12.773145] NET: Registered PF_MCTP protocol family <6>[ 12.773259] PCI: Using ACPI for IRQ routing <7>[ 12.834512] PCI: pci_cache_line_size set to 64 bytes <6>[ 12.834809] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 12.834976] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 12.835002] e820: reserve RAM buffer [mem 0x68ff8000-0x6bffffff] <7>[ 12.835012] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 12.835020] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 12.835028] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 12.836524] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 12.836524] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 12.836524] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 12.836524] vgaarb: loaded <7>[ 12.840653] Monitor-Mwait will be used to enter C-1 state <7>[ 12.840680] Monitor-Mwait will be used to enter C-2 state <7>[ 12.840680] Monitor-Mwait will be used to enter C-3 state <6>[ 12.851910] clocksource: Switched to clocksource tsc-early <5>[ 12.853616] VFS: Disk quotas dquot_6.6.0 <6>[ 12.853687] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 12.856621] AppArmor: AppArmor Filesystem Enabled <6>[ 12.857075] pnp: PnP ACPI init <6>[ 12.859415] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 12.859446] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 12.863611] system 00:02: [io 0x06a4] has been reserved <6>[ 12.863637] system 00:02: [io 0x06a0] has been reserved <6>[ 12.926308] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 12.926335] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 12.926355] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 12.926370] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 12.926383] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 12.926399] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 12.926415] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 12.926429] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 12.931560] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 12.936260] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 12.936536] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 12.944043] pnp: PnP ACPI: found 8 devices <6>[ 12.960860] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 12.961431] NET: Registered PF_INET protocol family <6>[ 12.961754] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 12.964915] tcp_listen_portaddr_hash hash table entries: 16384 (order: 9, 1179648 bytes, linear) <6>[ 12.965243] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 12.965510] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 12.966851] TCP bind hash table entries: 65536 (order: 12, 9437184 bytes, vmalloc hugepage) <6>[ 12.968935] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 12.969594] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 12.971252] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 12.972945] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 12.973046] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 12.973063] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 12.973078] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 12.973145] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 12.973155] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 12.973165] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 12.973175] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 12.973205] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 12.973230] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 12.973256] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 12.973279] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 12.973326] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 12.973340] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 12.973352] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 12.973364] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 12.973380] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 12.973390] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 12.973402] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 12.973414] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 12.973429] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 12.973438] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 12.973449] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 12.973461] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 12.973477] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 12.973485] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 12.973496] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 12.973511] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 12.973550] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 12.973598] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 12.973607] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 12.973615] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 12.973624] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 12.973633] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 12.973643] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 12.973650] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 12.973671] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 12.973682] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 12.973689] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 12.973697] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 12.973707] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 12.973715] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 12.973723] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 12.973733] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 12.973740] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 12.973749] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 12.975193] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 12.977372] PCI: CLS 0 bytes, default 64 <6>[ 12.977509] DMAR: No RMRR found <6>[ 12.977524] DMAR: No ATSR found <6>[ 12.977530] DMAR: dmar1: Using Queued invalidation <6>[ 12.977541] DMAR: dmar0: Using Queued invalidation <6>[ 12.977550] DMAR: dmar2: Using Queued invalidation <6>[ 12.978789] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 12.978914] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 12.979016] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 12.979100] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 12.983626] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 12.985775] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 12.985878] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 12.985973] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 12.986064] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 12.986185] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 12.986252] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 12.986314] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 12.986409] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 12.986510] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 12.986620] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 12.986688] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 12.986813] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 12.986873] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 12.986935] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 12.987002] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 12.987093] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 12.987183] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 12.987293] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 12.987417] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 12.987484] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 12.987549] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 12.987612] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 12.987707] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 12.987822] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 13.000084] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 13.000102] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 13.000112] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 13.005856] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 13.006188] clocksource: Switched to clocksource tsc <6>[ 13.006588] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 13.014231] Initialise system trusted keyrings <5>[ 13.014330] Key type blacklist registered <6>[ 13.014986] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 13.026569] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 13.026833] ntfs3: Enabled Linux POSIX ACLs support <6>[ 13.026841] ntfs3: Read-only LZX/Xpress compression included <5>[ 13.027896] integrity: Platform Keyring initialized <5>[ 13.027921] integrity: Machine keyring initialized <6>[ 13.034554] xor: automatically using best checksumming function avx <5>[ 13.034566] Key type asymmetric registered <5>[ 13.034582] Asymmetric key parser 'x509' registered <6>[ 13.034732] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 13.035310] io scheduler mq-deadline registered <6>[ 13.036709] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 13.038398] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 13.039003] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 13.040294] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 13.040835] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 13.042102] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 13.042614] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 13.045361] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 13.045939] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 13.047516] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 13.048112] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 13.050197] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 13.050439] ACPI: button: Lid Switch [LID0] <6>[ 13.050752] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 13.050967] ACPI: button: Sleep Button [SLPB] <6>[ 13.051229] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 13.051722] ACPI: button: Power Button [PWRB] <6>[ 13.228531] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 13.228555] ACPI: thermal: Thermal Zone [TZ00] (61 C) <6>[ 13.229401] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 13.231423] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 13.233550] ACPI: battery: Slot [BAT0] (battery present) <6>[ 13.256799] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 13.305814] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 13.313969] hpet_acpi_add: no address or irqs in _CRS <6>[ 13.315410] Linux agpgart interface v0.103 <6>[ 13.317546] ACPI: bus type drm_connector registered <7>[ 13.319600] initcall simpledrm_platform_driver_init blacklisted <6>[ 13.355208] loop: module loaded <6>[ 13.436829] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 13.590318] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 13.702580] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 13.844023] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 14.068815] Key type psk registered <6>[ 14.073405] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 14.075079] tun: Universal TUN/TAP device driver, 1.6 <6>[ 14.075094] nvme nvme0: pci function 0000:80:00.0 <6>[ 14.078861] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.079079] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 14.081638] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.085306] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.085347] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 14.085378] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.086313] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 14.086367] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.086385] usb usb1: Product: xHCI Host Controller <6>[ 14.086397] usb usb1: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ xhci-hcd <6>[ 14.086417] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 14.088670] hub 1-0:1.0: USB hub found <6>[ 14.088816] hub 1-0:1.0: 1 port detected <6>[ 14.095513] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 14.095537] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.095554] usb usb2: Product: xHCI Host Controller <6>[ 14.095566] usb usb2: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ xhci-hcd <6>[ 14.095586] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 14.097585] hub 2-0:1.0: USB hub found <6>[ 14.097688] hub 2-0:1.0: 3 ports detected <6>[ 14.120694] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 14.134226] nvme0n1: p1 p2 <6>[ 14.139765] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.139836] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 14.141791] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.144289] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.144325] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 14.144352] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.144765] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 14.144790] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.144807] usb usb3: Product: xHCI Host Controller <6>[ 14.144820] usb usb3: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ xhci-hcd <6>[ 14.144840] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 14.146205] hub 3-0:1.0: USB hub found <6>[ 14.146288] hub 3-0:1.0: 8 ports detected <6>[ 14.178566] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 14.178587] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.178598] usb usb4: Product: xHCI Host Controller <6>[ 14.178606] usb usb4: Manufacturer: Linux 6.18.0-rc7-lgci-xe-xe-4166-e1c1b3e03e356d1e2+ xhci-hcd <6>[ 14.178618] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 14.179451] hub 4-0:1.0: USB hub found <6>[ 14.179499] hub 4-0:1.0: 2 ports detected <6>[ 14.187038] usbcore: registered new interface driver usb-storage <6>[ 14.187263] usbcore: registered new interface driver usbserial_generic <6>[ 14.187429] usbserial: USB Serial support registered for generic <6>[ 14.187516] usbcore: registered new interface driver ftdi_sio <6>[ 14.187556] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 14.187632] usbcore: registered new interface driver pl2303 <6>[ 14.187677] usbserial: USB Serial support registered for pl2303 <6>[ 14.187834] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 14.187845] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 14.899469] i8042: Can't read CTR while initializing i8042 <3>[ 14.899480] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 14.900064] mousedev: PS/2 mouse device common for all mice <6>[ 14.901290] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 14.903313] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 14.903533] rtc_cmos rtc_cmos: setting system clock to 2025-11-28T15:15:30 UTC (1764342930) <6>[ 14.903748] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 14.903809] i2c_dev: i2c /dev entries driver <6>[ 14.909373] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 14.909388] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 14.909399] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 14.909446] device-mapper: uevent: version 1.0.3 <6>[ 14.909830] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 14.909849] intel_pstate: Intel P-state driver initializing <6>[ 14.913697] Hybrid CPU capacity scaling enabled <6>[ 14.914060] processor cpu0: EM: created perf domain <6>[ 14.914323] processor cpu1: EM: created perf domain <6>[ 14.914573] processor cpu2: EM: created perf domain <6>[ 14.914829] processor cpu3: EM: created perf domain <6>[ 14.915081] processor cpu4: EM: created perf domain <6>[ 14.915322] processor cpu5: EM: created perf domain <6>[ 14.915564] processor cpu6: EM: created perf domain <6>[ 14.915812] processor cpu7: EM: created perf domain <6>[ 14.916918] intel_pstate: HWP enabled <6>[ 14.916931] sdhci: Secure Digital Host Controller Interface driver <6>[ 14.916939] sdhci: Copyright(c) Pierre Ossman <6>[ 14.917165] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 14.920717] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 14.922081] drop_monitor: Initializing network drop monitor service <6>[ 14.922413] NET: Registered PF_INET6 protocol family <6>[ 14.924066] Segment Routing with IPv6 <6>[ 14.924105] In-situ OAM (IOAM) with IPv6 <6>[ 14.924152] NET: Registered PF_PACKET protocol family <5>[ 14.924318] Key type dns_resolver registered <4>[ 14.928002] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 14.928284] microcode: Current revision: 0x00000124 <6>[ 14.928812] IPI shorthand broadcast: enabled <6>[ 14.946458] sched_clock: Marking stable (14936002094, 9651261)->(15033378017, -87724662) <6>[ 14.947278] registered taskstats version 1 <5>[ 14.948386] Loading compiled-in X.509 certificates <6>[ 14.992554] Demotion targets for Node 0: null <6>[ 14.992798] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 14.992802] kmemleak: Automatic memory scanning thread started <5>[ 14.993027] Key type .fscrypt registered <5>[ 14.993032] Key type fscrypt-provisioning registered <6>[ 14.995974] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 14.998097] Key type encrypted registered <6>[ 14.998104] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 14.998200] ima: No TPM chip found, activating TPM-bypass! <5>[ 14.998213] Loading compiled-in module X.509 certificates <5>[ 14.998781] Loaded X.509 cert 'Build time autogenerated kernel key: 8564dbba486f992279ec1f05932a2a15fc602e4c' <6>[ 14.998792] ima: Allocated hash algorithm: sha256 <6>[ 14.998837] ima: No architecture policies found <6>[ 14.998923] evm: Initialising EVM extended attributes: <6>[ 14.998928] evm: security.selinux <6>[ 14.998931] evm: security.SMACK64 <6>[ 14.998934] evm: security.SMACK64EXEC <6>[ 14.998938] evm: security.SMACK64TRANSMUTE <6>[ 14.998941] evm: security.SMACK64MMAP <6>[ 14.998945] evm: security.apparmor <6>[ 14.998948] evm: security.ima <6>[ 14.998951] evm: security.capability <6>[ 14.998954] evm: HMAC attrs: 0x1 <6>[ 15.000881] PM: Magic number: 1:447:286 <6>[ 15.001055] netconsole: network logging started <6>[ 15.001608] RAS: Correctable Errors collector initialized. <6>[ 15.002099] clk: Disabling unused clocks <6>[ 15.002110] PM: genpd: Disabling unused power domains <4>[ 15.002524] check access for rdinit=/init failed: -2, ignoring <6>[ 15.002531] md: Waiting for all devices to be available before autodetect <6>[ 15.002537] md: If you don't use raid, use raid=noautodetect <6>[ 15.002542] md: Autodetecting RAID arrays. <6>[ 15.002550] md: autorun ... <6>[ 15.002553] md: ... autorun DONE. <6>[ 15.045599] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none. <6>[ 15.045673] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 15.046171] devtmpfs: mounted <6>[ 15.063064] Freeing unused decrypted memory: 2036K <6>[ 15.063915] Freeing unused kernel image (initmem) memory: 5704K <6>[ 15.063940] Write protecting the kernel read-only data: 36864k <6>[ 15.064518] Freeing unused kernel image (text/rodata gap) memory: 1192K <6>[ 15.064735] Freeing unused kernel image (rodata/data gap) memory: 696K <6>[ 15.069360] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 15.069385] Run /sbin/init as init process <7>[ 15.069390] with arguments: <7>[ 15.069390] /sbin/init <7>[ 15.069391] with environment: <7>[ 15.069392] HOME=/ <7>[ 15.069393] TERM=linux <7>[ 15.117205] systemd[1]: Inserted module 'autofs4' <7>[ 15.142261] systemd[1]: systemd 255.4-1ubuntu8.8 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 15.142297] systemd[1]: Detected architecture x86-64. <7>[ 15.143779] systemd[1]: Hostname set to . <7>[ 15.406750] systemd[1]: Queued start job for default target graphical.target. <7>[ 15.441573] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 15.443458] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 15.444842] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 15.445085] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 15.445710] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 15.445816] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC... <7>[ 15.445892] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 15.445971] systemd[1]: Reached target slices.target - Slice Units. <7>[ 15.446036] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 15.446099] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 15.446166] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 15.446391] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 15.446798] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 15.447069] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 15.447361] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 15.447602] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 15.447808] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 15.448081] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 15.448385] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 15.448658] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 15.448840] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.449113] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 15.449370] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 15.452781] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 15.455388] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 15.457992] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 15.460806] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 15.467802] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 15.471201] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 15.474202] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 15.478080] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 15.480508] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 15.484765] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 15.488548] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 15.490681] systemd-journald[206]: Collecting audit messages is disabled. <7>[ 15.493067] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 15.497081] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 15.500134] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 15.504276] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 15.504482] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <7>[ 15.509913] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 15.514564] pstore: Using crash dump compression: deflate <6>[ 15.516938] pstore: Registered efi_pstore as persistent store backend <7>[ 15.517095] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 15.517203] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 15.517276] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <6>[ 15.518060] fuse: init (API version 7.45) <7>[ 15.524050] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 15.529967] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 15.656901] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. <6>[ 15.683953] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:411435008k SS <7>[ 15.700306] systemd-journald[206]: Received client request to flush runtime journal. <7>[ 15.715180] systemd-journald[206]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 15.715198] systemd-journald[206]: Rotating system journal. <4>[ 16.414982] nvme nvme0: using unchecked data buffer <6>[ 16.578407] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 16.600392] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 16.603378] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 16.606089] intel-hid INTC107B:00: platform supports 5 button array <6>[ 16.613255] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <3>[ 16.713606] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 16.713876] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <5>[ 16.752765] audit: type=1400 audit(1764342932.347:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=422 comm="apparmor_parser" <5>[ 16.753621] audit: type=1400 audit(1764342932.348:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=424 comm="apparmor_parser" <5>[ 16.754001] audit: type=1400 audit(1764342932.349:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=423 comm="apparmor_parser" <5>[ 16.754311] audit: type=1400 audit(1764342932.349:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=425 comm="apparmor_parser" <5>[ 16.755268] audit: type=1400 audit(1764342932.350:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=428 comm="apparmor_parser" <5>[ 16.756359] audit: type=1400 audit(1764342932.351:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=429 comm="apparmor_parser" <5>[ 16.757272] audit: type=1400 audit(1764342932.352:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=426 comm="apparmor_parser" <5>[ 16.758415] audit: type=1400 audit(1764342932.353:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=431 comm="apparmor_parser" <5>[ 16.758788] audit: type=1400 audit(1764342932.354:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=427 comm="apparmor_parser" <5>[ 16.760663] audit: type=1400 audit(1764342932.355:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=432 comm="apparmor_parser" <6>[ 17.116588] ACPI: bus type thunderbolt registered <6>[ 17.119753] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 17.125038] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 17.126924] pci 0000:00:05.0: Setting to D3hot <6>[ 17.138071] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 17.139021] intel_pmc_core INT33A1:00: initialized <6>[ 17.141246] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 17.141254] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 17.164406] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 17.185291] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 17.274356] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 17.280823] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 17.292999] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 17.297219] intel_rapl_common: Found RAPL domain package <6>[ 17.297225] intel_rapl_common: Found RAPL domain dram <6>[ 17.328111] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer <6>[ 17.328116] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 17.328117] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 17.328118] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 17.328119] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules <6>[ 17.328120] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 17.378261] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 17.380398] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.388950] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.403412] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 175 <6>[ 17.403424] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 17.406738] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.472831] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 17.478247] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 17.613855] block nvme0n1: No UUID available providing old NGUID <6>[ 17.731303] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.796579] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 17.831949] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.834501] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.881026] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 17.883599] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 17.904468] evm: overlay not supported <6>[ 17.907359] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 17.907368] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 17.907370] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 17.955041] intel_rapl_common: Found RAPL domain package <6>[ 17.955047] intel_rapl_common: Found RAPL domain core <6>[ 17.955049] intel_rapl_common: Found RAPL domain uncore <6>[ 17.955050] intel_rapl_common: Found RAPL domain dram <6>[ 17.955052] intel_rapl_common: Found RAPL domain psys <6>[ 18.122945] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.150691] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 18.181561] loop0: detected capacity change from 0 to 8 <4>[ 18.183751] spi-nor spi0.0: supply vcc not found, using dummy regulator <5>[ 18.223620] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 18.223662] 0x000000000000-0x000002000000 : "BIOS" <6>[ 18.233603] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.250324] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.287763] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 18.451518] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 18.649119] Consider using thermal netlink events interface <6>[ 18.686503] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.912824] hid: raw HID events driver (C) Jiri Kosina <6>[ 18.920469] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 18.956344] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.960094] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.961498] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.961626] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.963294] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.964074] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.964077] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.965389] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.967089] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.967930] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.970196] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.973462] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.976439] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.978339] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.980746] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.982851] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.985750] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.986468] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 18.988712] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.990106] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.993588] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.993594] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 18.998358] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.075973] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.079632] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.083433] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.089015] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.094109] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.099469] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.104341] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.109176] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.113895] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.117014] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.120465] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.126347] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.131453] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.137072] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.143214] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.148020] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.153794] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.159629] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.164347] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.172337] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 22.059625] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <7>[ 28.655858] systemd-journald[206]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <6>[ 29.265063] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 29.266527] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <3>[ 29.750906] ucsi_acpi USBC000:00: failed to reset PPM! <3>[ 29.750961] ucsi_acpi USBC000:00: error -ETIMEDOUT: PPM init failed <7>[ 54.301678] [IGT] xe_module_load: executing <4>[ 54.301732] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 54.311874] [IGT] xe_module_load: starting subtest load <5>[ 54.590207] Setting dangerous option force_probe - tainting kernel <6>[ 54.593376] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 54.595079] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 54.595090] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 54.595232] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 54.595341] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 54.597242] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 54.597386] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 54.597506] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 54.597625] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 54.597764] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 54.597895] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 54.598006] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 54.598103] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 54.598189] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 54.598288] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 54.598376] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 54.598481] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 54.598585] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 54.598693] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 54.598830] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 54.598976] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 54.599090] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 54.599202] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 54.599307] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 54.599411] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 54.599514] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.599616] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.599742] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 54.599877] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.600002] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.600113] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.600224] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 54.600336] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.600447] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.600550] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.600658] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 54.600793] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.600926] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.601039] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.601137] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 54.601234] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.601330] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.601425] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.601519] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 54.601610] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 54.601725] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 54.601844] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 54.601970] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 54.602301] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 54.602402] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 54.602495] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 54.602590] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 54.602690] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 54.602810] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 54.602945] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 54.603058] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 54.603160] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 54.603265] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 54.603370] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 54.603471] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 54.603566] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 54.603664] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 54.603785] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 54.603899] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 54.604003] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 54.604088] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 54.604175] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.604261] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.604346] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 54.604430] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 54.604511] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 54.604593] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.604675] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.604780] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 54.604889] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 54.605025] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 54.605172] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 54.605312] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 54.605627] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 54.605828] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 54.605989] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 54.606100] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 54.606214] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 54.606359] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 54.606466] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io+mem:owns=io+mem <7>[ 54.606482] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 54.606598] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 54.606713] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 54.606843] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 54.607078] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 54.607451] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 54.607875] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 54.608035] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 54.608133] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 54.608222] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 54.608311] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 54.608397] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 54.608482] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 54.608565] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 54.608648] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 54.608763] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 54.608871] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 54.608975] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 54.609063] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 54.609145] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 54.611404] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 54.611539] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 54.611670] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 54.611813] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 54.611951] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 54.612085] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 54.612222] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 54.612350] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 54.612475] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.612598] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 54.612792] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.613014] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 54.613235] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.613454] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 54.613691] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 54.613905] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 54.614154] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.614371] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 54.614579] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.614812] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 54.615023] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.615233] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 54.615453] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 54.615673] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 54.615880] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 54.615898] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 54.616083] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 54.616278] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 54.616474] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 54.616672] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 54.616866] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 54.620688] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 54.620948] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 54.621193] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 54.621496] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:210:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 54.621892] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:210:DDI A/PHY A] <7>[ 54.622256] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 54.622495] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 54.622742] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 54.622976] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 54.623222] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 54.623443] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 54.623670] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 54.623892] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 54.624115] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 54.624369] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:210:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 54.624730] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 54.624935] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 54.625134] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 54.625328] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 54.625518] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 54.625866] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 54.626240] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 54.627736] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on <6>[ 54.628157] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 54.628104] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 54.666694] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 54.678699] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 54.702681] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 54.726677] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 54.738677] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <7>[ 54.798701] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 55.146708] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 55.146719] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.146721] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.146722] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 55.146724] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 55.146726] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.146727] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 55.146731] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.146732] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 55.146734] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.146769] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.146771] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 55.146772] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 55.146784] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:211:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 55.146894] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:211:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.158678] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:211:eDP-1] Performing OUI wait (0 ms) <7>[ 55.170681] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:211:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 55.170803] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:211:eDP-1] DRRS type: seamless <7>[ 55.170932] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:211:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 55.171068] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:211:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 55.171241] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 55.171346] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 55.171445] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 55.171541] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 55.171638] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 55.171784] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 55.171993] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:219:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 55.172182] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 55.172321] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:219:DDI TC1/PHY TC1] <7>[ 55.172702] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:231:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 55.172847] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 55.172971] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:231:DDI TC2/PHY TC2] <7>[ 55.173222] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:239:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 55.173367] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 55.173494] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:239:DDI TC3/PHY TC3] <7>[ 55.174000] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:89:pipe A] hw state readout: enabled <7>[ 55.174134] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe B] hw state readout: disabled <7>[ 55.174265] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:207:pipe C] hw state readout: disabled <7>[ 55.174371] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 55.174475] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 55.174568] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 55.174672] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 55.174786] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 55.174901] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 55.175007] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:92:plane 1B] hw state readout: disabled, pipe B <7>[ 55.175095] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 2B] hw state readout: disabled, pipe B <7>[ 55.175181] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 3B] hw state readout: disabled, pipe B <7>[ 55.175271] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:122:plane 4B] hw state readout: disabled, pipe B <7>[ 55.175364] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:132:plane 5B] hw state readout: disabled, pipe B <7>[ 55.175470] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:142:cursor B] hw state readout: disabled, pipe B <7>[ 55.175578] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1C] hw state readout: disabled, pipe C <7>[ 55.175695] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:161:plane 2C] hw state readout: disabled, pipe C <7>[ 55.175806] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:171:plane 3C] hw state readout: disabled, pipe C <7>[ 55.175914] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 4C] hw state readout: disabled, pipe C <7>[ 55.176010] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:191:plane 5C] hw state readout: disabled, pipe C <7>[ 55.176106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:201:cursor C] hw state readout: disabled, pipe C <7>[ 55.177033] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 55.177159] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:210:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 55.177264] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 55.177363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 55.177449] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST A] hw state readout: disabled, pipe A <7>[ 55.177532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:222:DP-MST B] hw state readout: disabled, pipe B <7>[ 55.177613] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:223:DP-MST C] hw state readout: disabled, pipe C <7>[ 55.177715] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 55.177827] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:231:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 55.177932] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:233:DP-MST A] hw state readout: disabled, pipe A <7>[ 55.178033] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:234:DP-MST B] hw state readout: disabled, pipe B <7>[ 55.178120] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:235:DP-MST C] hw state readout: disabled, pipe C <7>[ 55.178203] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 55.178286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:239:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 55.178372] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:241:DP-MST A] hw state readout: disabled, pipe A <7>[ 55.178458] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:242:DP-MST B] hw state readout: disabled, pipe B <7>[ 55.178543] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:243:DP-MST C] hw state readout: disabled, pipe C <7>[ 55.179409] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 55.179519] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 0 hw state readout: pipe_mask 0x1, on 1 <7>[ 55.179630] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] DPLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 55.179755] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TBT PLL hw state readout: pipe_mask 0x0, on 1 <7>[ 55.179888] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 1 hw state readout: pipe_mask 0x0, on 0 <7>[ 55.180018] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 2 hw state readout: pipe_mask 0x0, on 0 <7>[ 55.180132] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 3 hw state readout: pipe_mask 0x0, on 0 <7>[ 55.180234] xe 0000:00:02.0: [drm:intel_dpll_readout_hw_state [xe]] TC PLL 4 hw state readout: pipe_mask 0x0, on 0 <7>[ 55.180357] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:211:eDP-1] hw state readout: enabled <7>[ 55.180478] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:220:DP-1] hw state readout: disabled <7>[ 55.180593] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:232:DP-2] hw state readout: disabled <7>[ 55.180719] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:240:DP-3] hw state readout: disabled <7>[ 55.180943] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 55.181067] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 55.181171] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 55.181262] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 55.181347] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 55.181433] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 55.181526] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:89:pipe A] min_cdclk 173855 kHz <7>[ 55.181618] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:92:plane 1B] min_cdclk 0 kHz <7>[ 55.181728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 2B] min_cdclk 0 kHz <7>[ 55.181841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:112:plane 3B] min_cdclk 0 kHz <7>[ 55.181954] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:122:plane 4B] min_cdclk 0 kHz <7>[ 55.182047] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:132:plane 5B] min_cdclk 0 kHz <7>[ 55.182130] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:142:cursor B] min_cdclk 0 kHz <7>[ 55.182216] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:148:pipe B] min_cdclk 0 kHz <7>[ 55.182305] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:151:plane 1C] min_cdclk 0 kHz <7>[ 55.182403] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:161:plane 2C] min_cdclk 0 kHz <7>[ 55.182507] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:171:plane 3C] min_cdclk 0 kHz <7>[ 55.182608] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:plane 4C] min_cdclk 0 kHz <7>[ 55.182720] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:191:plane 5C] min_cdclk 0 kHz <7>[ 55.182822] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:201:cursor C] min_cdclk 0 kHz <7>[ 55.182923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:207:pipe C] min_cdclk 0 kHz <7>[ 55.183174] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:89:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 55.183264] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:148:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 55.183349] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:207:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 55.183432] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 55.183551] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 55.183678] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 55.183851] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 55.183993] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 55.184346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [setup_hw_state] <7>[ 55.184480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 55.184598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 55.184726] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 55.184864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 55.184998] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 55.185113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 55.185224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 55.185336] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 55.185447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 55.185579] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 55.185721] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 55.185850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 55.185977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 55.186097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 55.186207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 55.186315] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 55.186419] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 55.186516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.186612] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.186732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 55.186855] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 55.186976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 55.187084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 55.187174] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 55.187272] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 55.187370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 55.187467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 55.187565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 55.187665] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 270000, fracen: yes, <7>[ 55.187775] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] quot: 40960, rem: 0, den: 1, <7>[ 55.187890] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 55.188004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 55.188119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 55.188232] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 55.188327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 55.188417] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 55.188512] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 55.188614] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 55.188741] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 55.188863] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 55.188982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 55.189092] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.189191] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.189288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.189384] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 55.189480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 55.189573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.189680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.189792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 55.189904] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 55.190014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 55.190101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe B] enable: no [setup_hw_state] <7>[ 55.190185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:207:pipe C] enable: no [setup_hw_state] <7>[ 55.190276] xe 0000:00:02.0: [drm:intel_dpll_sanitize_state [xe]] TBT PLL enabled but not in use, disabling <7>[ 55.190676] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:89:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 55.190814] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:89:pipe A] <6>[ 55.195908] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 55.199602] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 55.199738] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 55.199855] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 55.199969] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 55.200056] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 55.200139] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 55.200218] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 55.200294] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 55.200369] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 55.200443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 55.200515] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 55.200586] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 55.200667] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 55.200757] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 55.200847] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 55.200994] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 55.211713] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 55.212561] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 55.212789] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,0000007f <7>[ 55.212909] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,0000007f <7>[ 55.213015] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 55.213104] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 55.213175] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 55.853750] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 55.853753] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 55.853754] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 55.853883] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 55.854012] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 55.854126] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 55.854240] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 55.854383] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 55.854501] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 55.854631] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 55.854733] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 55.854828] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 55.854980] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 55.856171] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 55.856280] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 55.856385] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 55.856485] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 55.856579] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 55.856678] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 55.856767] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 55.856864] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 55.856954] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 55.857039] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 55.857125] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 55.857211] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 55.857297] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 55.857382] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 55.857470] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 55.857554] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 55.857637] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 55.857729] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 55.857814] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 55.857908] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 55.857996] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 55.858080] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 55.858163] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 55.858245] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 55.858325] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 55.858403] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 55.858486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 55.858571] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 55.858654] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 55.858747] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 55.858830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 55.858917] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 55.858999] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 55.859079] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 55.859159] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 55.859238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 55.859318] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 55.859403] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 55.859490] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 55.859577] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 55.859994] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 55.860080] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 55.860161] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 55.860239] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 55.860544] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 55.860632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 55.860717] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 55.860794] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 55.861105] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 55.861180] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 55.861255] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 55.861329] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 55.861404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 55.861478] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 55.861552] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 55.862176] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 55.862303] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 55.862388] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 55.862475] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 55.862560] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 55.862643] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 55.862740] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 55.862815] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 55.862889] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 55.862960] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 55.863032] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 55.863104] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 55.863178] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 55.863255] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 55.863334] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 55.863431] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 55.863618] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 55.865037] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 55.867907] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 55.883417] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 55.893852] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 55.894179] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 55.895355] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 55.895498] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 55.895606] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 55.895713] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 55.895799] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 55.895890] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 55.895976] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 55.896056] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 55.896141] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 55.899533] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 55.899692] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 55.899816] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 55.902302] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 55.902448] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 55.906514] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 55.911022] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 55.911207] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 55.911362] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 55.911508] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 55.911647] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 55.911811] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 55.911950] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 55.912083] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 55.912213] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 55.912341] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 55.912467] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 55.912593] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 55.912740] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 55.912891] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 55.914715] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 55.917531] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 55.918705] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 55.918848] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 55.919028] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 55.939833] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 55.940449] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 55.940829] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 55.941121] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 55.941393] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 55.941711] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 55.941982] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 55.942236] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 55.942240] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 55.942243] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 55.942245] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 55.942248] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 55.942250] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 55.942253] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 55.942255] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 55.942258] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 55.942260] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 55.942391] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 55.942854] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 55.943305] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 55.945566] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 55.945914] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 55.946229] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 55.946513] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 55.946799] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 55.947061] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 55.947304] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 55.947604] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 55.947854] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 55.948073] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 55.948286] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 55.948498] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 55.948774] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 55.948975] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 55.949169] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 55.949358] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 55.949556] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 55.949759] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 55.949935] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 55.950100] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 55.950263] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 55.950431] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 55.950581] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 55.950743] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 55.950887] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 55.951045] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 55.951181] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 55.951313] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 55.951444] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 55.951589] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 55.951746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 55.952296] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 55.952441] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 55.952582] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 55.953054] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 55.953209] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 55.953338] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 55.954023] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 55.954205] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 55.954325] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 55.954433] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 55.954534] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 55.954631] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 55.954738] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 55.954827] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 55.954913] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 55.954995] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 55.955075] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 55.955154] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 55.955231] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 55.955306] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 55.955382] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 55.955491] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 55.955600] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 55.957247] xe 0000:00:02.0: [drm:guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_buf_cache_init_with_size [xe] <7>[ 55.975195] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 55.996541] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 55.997055] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 55.998268] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 55.998537] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 56.001649] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 56.001917] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 56.004798] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 56.005045] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 56.047697] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 56.048958] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 56.049456] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 56.049992] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 56.050502] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 56.051542] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 56.052010] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 56.052435] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 56.054460] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 0: start 0x90008 <7>[ 56.055013] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 1: start 0x90108 <7>[ 56.055509] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 2: start 0x90208 <7>[ 56.056093] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 3: start 0x90308 <7>[ 56.056573] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:89:pipe A] FQ 4: start 0x903c8 <7>[ 56.057076] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 0: start 0x98008 <7>[ 56.057597] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 1: start 0x98108 <7>[ 56.058120] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 2: start 0x98208 <7>[ 56.058565] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 3: start 0x98308 <7>[ 56.059034] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:148:pipe B] FQ 4: start 0x983c8 <7>[ 56.059508] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 0: start 0x52008 <7>[ 56.059968] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 1: start 0x52108 <7>[ 56.060379] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 2: start 0x52208 <7>[ 56.060784] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 3: start 0x52308 <7>[ 56.061143] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:207:pipe C] FQ 4: start 0x523c8 <7>[ 56.062005] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 56.062356] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:89:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 56.062694] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 56.063087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:148:pipe B] enable: no [fastset] <7>[ 56.063436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:207:pipe C] enable: no [fastset] <7>[ 56.065040] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 56.065276] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 56.075498] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:148:pipe B] <7>[ 56.076021] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:207:pipe C] <7>[ 56.091397] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:211:eDP-1] adding connector to sysfs <7>[ 56.096678] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:211:eDP-1] backlight device intel_backlight registered <7>[ 56.096983] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:211:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 56.097214] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:211:eDP-1] Panel prepare <7>[ 56.097921] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 56.100112] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:211:eDP-1] generating connector hotplug event <7>[ 56.100229] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:220:DP-1] adding connector to sysfs <7>[ 56.100878] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 56.101834] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:220:DP-1] generating connector hotplug event <7>[ 56.101900] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:232:DP-2] adding connector to sysfs <7>[ 56.102491] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 56.103468] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:232:DP-2] generating connector hotplug event <7>[ 56.103526] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:240:DP-3] adding connector to sysfs <7>[ 56.104130] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 56.105015] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:240:DP-3] generating connector hotplug event <6>[ 56.105076] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 56.105148] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 56.121925] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 56.127804] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 56.130231] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 56.130427] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 56.130752] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 56.130759] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 56.132315] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 56.132591] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 56.132738] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:148:pipe B] not active, skipping <7>[ 56.132860] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:207:pipe C] not active, skipping <7>[ 56.132975] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 56.133747] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 56.134192] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 56.134438] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 56.134448] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 56.134774] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:220:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 56.134918] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 56.135076] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 56.135203] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:232:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 56.135323] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 56.135471] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 56.135603] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:240:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 56.135829] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 56.135923] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 56.136004] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 56.137534] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 56.137899] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 56.138040] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 56.138169] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 56.138564] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 56.138573] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.138576] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.138577] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 56.138580] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 56.138583] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.138585] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 56.138673] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.138675] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 56.138678] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.138869] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 56.139069] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 56.139006] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 56.139134] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 56.139883] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] status updated from unknown to connected <7>[ 56.140126] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 56.140136] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 56.140275] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <5>[ 56.140751] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.140755] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 56.140757] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 56.140811] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 56.140822] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 56.140825] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 56.140830] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 56.140834] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 56.141061] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 56.141066] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 56.141070] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 56.141239] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 56.141243] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 56.141246] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 56.141410] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 56.141414] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 56.141417] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 56.141419] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 56.141421] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 56.141548] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 56.141570] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 56.141573] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 56.141584] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 56.141713] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 56.141729] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 56.148825] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 56.152684] fbcon: xedrmfb (fb0) is primary device <7>[ 56.154590] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:211:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <6>[ 56.154713] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 56.154830] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:210:DDI A/PHY A][CRTC:89:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 56.154985] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 56.155149] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 56.155302] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:210:DDI A/PHY A] [CRTC:89:pipe A] <7>[ 56.155330] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 56.155453] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 56.155601] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in dpll_hw_state <7>[ 56.155755] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 56.155897] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 56.156039] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 270000, fracen: yes, <7>[ 56.156177] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] quot: 40960, rem: 0, den: 1, <7>[ 56.156313] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 56.156447] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 56.156579] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 56.156728] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 56.156865] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 56.156997] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 56.157128] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 56.157254] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 56.157378] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 56.157483] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 56.157588] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 56.157728] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 56.157855] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] c10pll_rawhw_state: <7>[ 56.157980] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] tx: 0x10, cmn: 0x21 <7>[ 56.158105] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 56.158232] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 56.158360] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 56.158487] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 56.158615] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 56.158754] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 56.158886] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 56.159021] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:89:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 56.159153] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:89:pipe A] fastset requirement not met, forcing full modeset <7>[ 56.159282] xe 0000:00:02.0: [drm:intel_dpll_crtc_put [xe]] [CRTC:89:pipe A] releasing DPLL 0 <7>[ 56.159456] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 56.159595] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 56.159735] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 56.159855] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 56.159971] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 56.160085] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 56.160196] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.160309] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.160435] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.160561] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 56.160679] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.160787] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.160906] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.161024] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 56.161133] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.161241] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.161349] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.161454] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 56.161555] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.161729] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.161829] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.161938] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 56.162050] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.162155] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.162262] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 56.162379] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:89:pipe A] data rate 1390840 num active planes 1 <7>[ 56.162522] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 56.162669] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 56.162813] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 56.162953] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 56.163090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 56.163278] xe 0000:00:02.0: [drm:intel_find_dpll [xe]] [CRTC:89:pipe A] allocated DPLL 0 <7>[ 56.163423] xe 0000:00:02.0: [drm:intel_dpll_crtc_get [xe]] [CRTC:89:pipe A] reserving DPLL 0 <7>[ 56.163563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:89:pipe A] enable: yes [modeset] <7>[ 56.163710] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 56.163849] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 56.163984] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 56.164116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 56.164248] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 56.164378] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 56.164507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 56.164637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 56.164780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 56.164908] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 56.165035] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 56.165162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 56.165288] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 56.165415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 56.165547] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 56.165689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 56.165820] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 56.165945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 56.166069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 56.166198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 56.166326] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 56.166450] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 56.166581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 56.166724] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 56.166852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 56.166976] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 56.167111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 56.167235] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 56.167363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 56.167489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 56.167618] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 56.167749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 56.167867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 56.167982] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cx0pll_hw_state: lane_count: 4, ssc_enabled: no, use_c10: yes, tbt_mode: no <7>[ 56.168097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_hw_state: clock: 432000, fracen: no, <7>[ 56.168211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 56.168322] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] c10pll_rawhw_state: <7>[ 56.168433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] tx: 0x10, cmn: 0x21 <7>[ 56.168544] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 56.168653] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 56.168779] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 56.168889] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 56.169008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 56.169128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 56.169249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 56.169367] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 56.169489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.169616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.169748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.169861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 56.169972] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 56.170095] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.170214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.170325] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 56.170436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 56.170545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 56.170667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:212] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 56.170784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 56.170903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 56.171019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 56.171136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 56.171252] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 56.171368] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 56.171484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <7>[ 56.177041] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 56.177213] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 56.177863] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <7>[ 56.185324] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 56.185456] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 56.185572] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 56.185696] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 56.185842] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 56.185984] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 56.186102] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 56.186219] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 56.186330] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 56.186435] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 56.186539] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 56.186641] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 56.186776] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 56.186908] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 56.187018] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 56.187119] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 56.187226] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 56.187335] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 56.187443] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 56.187551] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 56.187662] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 56.187786] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 56.187913] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 56.188021] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 56.188117] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 56.188212] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 56.188307] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 56.188402] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 56.188497] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 56.188594] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 56.188732] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 56.188861] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 56.188988] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 56.189087] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 56.189180] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 56.189281] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 56.194990] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <6>[ 56.196962] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 56.200492] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 56.201431] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 56.382794] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 0 <7>[ 56.384118] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 56.394120] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power off <7>[ 56.394591] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 56.394654] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 56.395128] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - short <7>[ 56.395137] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 56.446170] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 56.446661] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disable DPLL 0 (active 0x1, on? 1) for [CRTC:89:pipe A] <7>[ 56.446715] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 56.447144] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 56.447547] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - short <7>[ 56.447661] xe 0000:00:02.0: [drm:intel_dpll_disable [xe]] disabling DPLL 0 <7>[ 56.447954] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 56.448049] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 56.448698] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 56.449312] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:210:DDI A/PHY A] <7>[ 56.449615] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DDI TC1/PHY TC1] <7>[ 56.449908] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST A] <7>[ 56.450228] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:222:DP-MST B] <7>[ 56.450489] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:223:DP-MST C] <7>[ 56.450783] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:231:DDI TC2/PHY TC2] <7>[ 56.451107] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:233:DP-MST A] <7>[ 56.451377] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:234:DP-MST B] <7>[ 56.451634] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:235:DP-MST C] <7>[ 56.451955] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:239:DDI TC3/PHY TC3] <7>[ 56.452227] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:241:DP-MST A] <7>[ 56.452481] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:242:DP-MST B] <7>[ 56.452758] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:243:DP-MST C] <7>[ 56.453077] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 56.454627] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enable DPLL 0 (active 0x1, on? 0) for [CRTC:89:pipe A] <7>[ 56.455057] xe 0000:00:02.0: [drm:intel_dpll_enable [xe]] enabling DPLL 0 <7>[ 56.457027] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turn panel power on <7>[ 56.457437] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power cycle (489 ms remaining) <7>[ 56.482048] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 56.482444] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - long <7>[ 56.482809] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 56.483191] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 56.585753] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 56.928862] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 57.010037] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 57.010474] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 57.010862] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 57.047200] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 57.047794] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:210:DDI A/PHY A] - long <7>[ 57.048298] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 57.048911] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:210:DDI A/PHY A] <7>[ 57.135301] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.135300] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.135324] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 57.222253] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 57.222717] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD on <7>[ 57.223175] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 57.225339] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 57.226604] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 57.227603] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 57.228935] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 57.230219] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 57.231503] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 57.231964] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 57.233551] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 57.234055] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:211:eDP-1][ENCODER:210:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 57.235002] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 57.235655] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 57.236073] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 57.236623] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:211:eDP-1] set backlight PWM = 192000 <7>[ 57.252696] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 57.254931] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:211:eDP-1] <7>[ 57.255512] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:89:pipe A] <7>[ 57.257207] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 57.258923] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <6>[ 57.260733] Console: switching to colour frame buffer device 180x56 <7>[ 57.260598] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <7>[ 57.261450] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:211:eDP-1] set backlight level = 13892 <6>[ 57.293654] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 57.294415] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 57.295483] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 57.296015] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 57.296487] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 57.297110] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 57.297513] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 57.297916] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 57.298257] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 57.298606] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 57.298913] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 57.299203] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 57.299480] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 57.299778] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 57.300042] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 57.300294] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 57.300556] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 57.300827] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 57.301050] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 57.301267] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 57.301506] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 57.301715] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 57.301911] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 57.302575] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 57.302618] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 57.302906] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 57.303108] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 57.303347] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 57.303441] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 57.303469] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 57.303577] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 57.303823] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 57.304589] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 57.305275] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.306609] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.307967] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.308337] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 57.308601] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.308845] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.309611] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 57.309623] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.309627] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.309629] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 57.309633] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 57.309637] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.309640] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 57.309655] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.309658] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 57.309662] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.309699] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 57.309847] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 57.309968] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 57.310220] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <5>[ 57.310737] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.310742] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.310743] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.310955] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 57.311012] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.311023] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.311034] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 57.311045] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 57.311511] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.311873] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 57.311888] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 57.311897] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 57.312240] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.312503] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 57.312513] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 57.312521] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 57.312827] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 57.313085] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 57.313093] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 57.313102] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 57.313108] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 57.313113] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 57.313639] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 57.313703] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 57.313711] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 57.313791] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 57.316544] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 57.316822] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 57.319481] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 57.352267] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.352833] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.353330] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.353941] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 57.353983] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 57.355373] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] <7>[ 57.355404] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:211:eDP-1] <7>[ 57.356482] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 57.357219] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 57.357651] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.358093] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 57.358818] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 57.358834] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.358840] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.358844] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 57.358852] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 57.358858] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.358862] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD monitor <5>[ 57.358880] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.358898] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:211:eDP-1] ELD size 20, SAD count 0 <5>[ 57.358905] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.358963] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] VRR capable: yes <7>[ 57.359366] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 57.359761] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:211:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 57.360975] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.360982] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 57.360986] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 57.361165] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:211:eDP-1] probed modes: <7>[ 57.361190] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 57.361200] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 57.361210] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] <7>[ 57.361219] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:220:DP-1] <7>[ 57.361633] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:220:DP-1] disconnected <7>[ 57.361643] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] <7>[ 57.361650] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:232:DP-2] <7>[ 57.362042] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:232:DP-2] disconnected <7>[ 57.362051] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] <7>[ 57.362058] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:240:DP-3] <7>[ 57.362448] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:240:DP-3] disconnected <7>[ 57.362454] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] enabled? yes <7>[ 57.362462] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:220:DP-1] enabled? no <7>[ 57.362468] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:232:DP-2] enabled? no <7>[ 57.362473] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:240:DP-3] enabled? no <7>[ 57.362670] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 57.362706] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:211:eDP-1] found preferred mode: 2880x1800 <7>[ 57.362724] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 57.362794] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:89:pipe A] desired mode 2880x1800 set (0,0) <7>[ 57.365383] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 57.365664] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 57.369881] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 57.386862] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.387339] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.387811] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 57.394155] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 57.395909] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 57.405200] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 57.405760] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 57.406697] [IGT] xe_module_load: exiting, ret=0 <7>[ 57.411879] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 57.437021] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 57.437556] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 57.438037] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 58.367104] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.367159] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 58.367288] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 59.793723] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 turning VDD off <7>[ 59.794132] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:210:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067