<5>[ 0.000000] Linux version 6.18.0-rc4-lgci-xe-xe-4074-2bc418aa7efaae562+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Nov 7 22:25:27 UTC 2025 <6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <6>[ 0.000000] KERNEL supported cpus: <6>[ 0.000000] Intel GenuineIntel <6>[ 0.000000] AMD AuthenticAMD <6>[ 0.000000] Hygon HygonGenuine <6>[ 0.000000] Centaur CentaurHauls <6>[ 0.000000] zhaoxin Shanghai <6>[ 0.000000] x86/tme: not enabled by BIOS <6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks <6>[ 0.000000] BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] APIC: Static calls initialized <6>[ 0.000000] efi: EFI v2.7 by Intel <6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 SMBIOS=0x6cbc7000 MEMATTR=0x69916018 ESRT=0x68ff8518 MOKvar=0x6ccfb000 <6>[ 0.000000] efi: Remove mem259: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved <6>[ 0.000000] efi: Remove mem261: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map <7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved <6>[ 0.000000] SMBIOS 3.8 present. <6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D99.2508051732 08/05/2025 <6>[ 0.000000] DMI: Memory slots populated: 8/8 <6>[ 0.000000] tsc: Detected 3100.000 MHz processor <6>[ 0.000000] tsc: Detected 3110.400 MHz TSC <7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000015] last_pfn = 0x87f800 max_arch_pfn = 0x400000000 <6>[ 0.000018] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs <6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT <6>[ 0.000375] x2apic: enabled by BIOS, switching to x2apic ops <6>[ 0.000377] last_pfn = 0x70000 max_arch_pfn = 0x400000000 <6>[ 0.004879] esrt: Reserving ESRT space from 0x0000000068ff8518 to 0x0000000068ff8668. <7>[ 0.004886] e820: update [mem 0x68ff8000-0x68ff8fff] usable ==> reserved <6>[ 0.004904] Using GB pages for direct mapping <6>[ 0.005540] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes <6>[ 0.005541] printk: early log buf free: 258816(98%) <6>[ 0.005542] Secure boot disabled <6>[ 0.005543] ACPI: Early table checksum verification disabled <6>[ 0.005546] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL ) <6>[ 0.005549] ACPI: XSDT 0x000000006FF70228 000194 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005553] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013) <6>[ 0.005556] ACPI: DSDT 0x000000006FFB6000 02555F (v02 INTEL LNL 00000002 01000013) <6>[ 0.005557] ACPI: FACS 0x000000006FEF1000 000040 <6>[ 0.005559] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930) <6>[ 0.005560] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930) <6>[ 0.005562] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930) <6>[ 0.005563] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930) <6>[ 0.005564] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930) <6>[ 0.005565] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930) <6>[ 0.005567] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930) <6>[ 0.005568] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930) <6>[ 0.005569] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930) <6>[ 0.005571] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930) <6>[ 0.005572] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000) <6>[ 0.005574] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930) <6>[ 0.005575] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930) <6>[ 0.005577] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930) <6>[ 0.005578] ACPI: SSDT 0x000000006FFDD000 009176 (v02 INTEL TcssSsdt 00001000 INTL 20210930) <6>[ 0.005579] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930) <6>[ 0.005580] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930) <6>[ 0.005582] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930) <6>[ 0.005583] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930) <6>[ 0.005584] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005586] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005587] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013) <6>[ 0.005588] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013) <6>[ 0.005589] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930) <6>[ 0.005591] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930) <6>[ 0.005592] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930) <6>[ 0.005593] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930) <6>[ 0.005595] ACPI: LPIT 0x000000006FF85000 0000CC (v01 INTEL LNL 00000002 01000013) <6>[ 0.005596] ACPI: SSDT 0x000000006FF84000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930) <6>[ 0.005597] ACPI: SSDT 0x000000006FF83000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930) <6>[ 0.005599] ACPI: DBGP 0x000000006FF82000 000034 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005600] ACPI: DBG2 0x000000006FF81000 000054 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005601] ACPI: NHLT 0x000000006FF80000 0002E3 (v00 INTEL LNL 00000002 01000013) <6>[ 0.005602] ACPI: SSDT 0x000000006FF7E000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930) <6>[ 0.005604] ACPI: SSDT 0x000000006FF77000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930) <6>[ 0.005605] ACPI: ECDT 0x000000006FF76000 000069 (v01 LNL 00000002 01000013) <6>[ 0.005606] ACPI: DMAR 0x000000006FF75000 0000D8 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005608] ACPI: FPDT 0x000000006FF74000 000044 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005609] ACPI: SSDT 0x000000006FF73000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930) <6>[ 0.005610] ACPI: SSDT 0x000000006FF71000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930) <6>[ 0.005612] ACPI: SSDT 0x000000006FF6D000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930) <6>[ 0.005613] ACPI: SDEV 0x000000006FFA8000 000046 (v01 00000000 00000000) <6>[ 0.005614] ACPI: SSDT 0x000000006FF62000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930) <6>[ 0.005616] ACPI: PHAT 0x000000006FF61000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D) <6>[ 0.005617] ACPI: BGRT 0x000000006FF60000 000038 (v01 INTEL LNL 00000002 01000013) <6>[ 0.005618] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113] <6>[ 0.005619] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb55e] <6>[ 0.005619] ACPI: Reserving FACS table memory at [mem 0x6fef1000-0x6fef103f] <6>[ 0.005619] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa] <6>[ 0.005620] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae] <6>[ 0.005621] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba] <6>[ 0.005622] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6] <6>[ 0.005622] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f] <6>[ 0.005623] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6175] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2] <6>[ 0.005624] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e] <6>[ 0.005625] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955] <6>[ 0.005625] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037] <6>[ 0.005625] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027] <6>[ 0.005626] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7] <6>[ 0.005626] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b] <6>[ 0.005626] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469] <6>[ 0.005627] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815] <6>[ 0.005628] ACPI: Reserving LPIT table memory at [mem 0x6ff85000-0x6ff850cb] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff84000-0x6ff84d5b] <6>[ 0.005628] ACPI: Reserving SSDT table memory at [mem 0x6ff83000-0x6ff831ef] <6>[ 0.005629] ACPI: Reserving DBGP table memory at [mem 0x6ff82000-0x6ff82033] <6>[ 0.005629] ACPI: Reserving DBG2 table memory at [mem 0x6ff81000-0x6ff81053] <6>[ 0.005629] ACPI: Reserving NHLT table memory at [mem 0x6ff80000-0x6ff802e2] <6>[ 0.005629] ACPI: Reserving SSDT table memory at [mem 0x6ff7e000-0x6ff7f15b] <6>[ 0.005630] ACPI: Reserving SSDT table memory at [mem 0x6ff77000-0x6ff7d53a] <6>[ 0.005630] ACPI: Reserving ECDT table memory at [mem 0x6ff76000-0x6ff76068] <6>[ 0.005630] ACPI: Reserving DMAR table memory at [mem 0x6ff75000-0x6ff750d7] <6>[ 0.005631] ACPI: Reserving FPDT table memory at [mem 0x6ff74000-0x6ff74043] <6>[ 0.005631] ACPI: Reserving SSDT table memory at [mem 0x6ff73000-0x6ff7386c] <6>[ 0.005631] ACPI: Reserving SSDT table memory at [mem 0x6ff71000-0x6ff723da] <6>[ 0.005631] ACPI: Reserving SSDT table memory at [mem 0x6ff6d000-0x6ff6f462] <6>[ 0.005632] ACPI: Reserving SDEV table memory at [mem 0x6ffa8000-0x6ffa8045] <6>[ 0.005632] ACPI: Reserving SSDT table memory at [mem 0x6ff62000-0x6ff6c4f9] <6>[ 0.005632] ACPI: Reserving PHAT table memory at [mem 0x6ff61000-0x6ff617bf] <6>[ 0.005633] ACPI: Reserving BGRT table memory at [mem 0x6ff60000-0x6ff60037] <6>[ 0.005703] APIC: Switched APIC routing to: cluster x2apic <6>[ 0.005902] No NUMA configuration found <6>[ 0.005903] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff] <6>[ 0.005908] NODE_DATA(0) allocated [mem 0x87f352e40-0x87f37dfff] <6>[ 0.006022] Zone ranges: <6>[ 0.006022] DMA [mem 0x0000000000001000-0x0000000000ffffff] <6>[ 0.006023] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] <6>[ 0.006024] Normal [mem 0x0000000100000000-0x000000087f7fffff] <6>[ 0.006025] Device empty <6>[ 0.006025] Movable zone start for each node <6>[ 0.006026] Early memory node ranges <6>[ 0.006026] node 0: [mem 0x0000000000001000-0x000000000009efff] <6>[ 0.006027] node 0: [mem 0x0000000000100000-0x000000006cac0fff] <6>[ 0.006027] node 0: [mem 0x000000006ffff000-0x000000006fffffff] <6>[ 0.006028] node 0: [mem 0x0000000104500000-0x000000087f7fffff] <6>[ 0.006029] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff] <6>[ 0.006034] On node 0, zone DMA: 1 pages in unavailable ranges <6>[ 0.006048] On node 0, zone DMA: 97 pages in unavailable ranges <6>[ 0.007641] On node 0, zone DMA32: 13630 pages in unavailable ranges <6>[ 0.035447] On node 0, zone Normal: 17664 pages in unavailable ranges <6>[ 0.035459] On node 0, zone Normal: 2048 pages in unavailable ranges <6>[ 0.035952] ACPI: PM-Timer IO Port: 0x1808 <6>[ 0.035958] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) <6>[ 0.036009] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 <6>[ 0.036011] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.036012] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) <6>[ 0.036015] ACPI: Using ACPI (MADT) for SMP configuration information <6>[ 0.036015] ACPI: HPET id: 0x8086a701 base: 0xfed00000 <7>[ 0.036027] e820: update [mem 0x6992d000-0x69947fff] usable ==> reserved <6>[ 0.036034] TSC deadline timer available <6>[ 0.036036] CPU topo: Max. logical packages: 1 <6>[ 0.036036] CPU topo: Max. logical dies: 1 <6>[ 0.036036] CPU topo: Max. dies per package: 1 <6>[ 0.036038] CPU topo: Max. threads per core: 1 <6>[ 0.036038] CPU topo: Num. cores per package: 8 <6>[ 0.036039] CPU topo: Num. threads per package: 8 <6>[ 0.036039] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs <6>[ 0.036052] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.036053] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff] <6>[ 0.036054] PM: hibernation: Registered nosave memory: [mem 0x68ff8000-0x68ff8fff] <6>[ 0.036055] PM: hibernation: Registered nosave memory: [mem 0x6992d000-0x69947fff] <6>[ 0.036056] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fffefff] <6>[ 0.036056] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x1044fffff] <6>[ 0.036058] [mem 0x80800000-0xfed1ffff] available for PCI devices <6>[ 0.036059] Booting paravirtualized kernel on bare hardware <6>[ 0.036060] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns <6>[ 0.036069] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 <6>[ 0.036404] percpu: Embedded 86 pages/cpu s229376 r8192 d114688 u524288 <7>[ 0.036408] pcpu-alloc: s229376 r8192 d114688 u524288 alloc=1*2097152 <7>[ 0.036409] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 <5>[ 0.036424] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global snd_hda_intel.probe_mask=0x104 xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast initcall_blacklist=simpledrm_platform_driver_init ro <7>[ 0.036523] blacklisting initcall simpledrm_platform_driver_init <5>[ 0.036541] random: crng init done <6>[ 0.038392] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) <6>[ 0.039311] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) <6>[ 0.039372] software IO TLB: area num 8. <6>[ 0.046745] Fallback order for Node 0: 0 <6>[ 0.046748] Built 1 zonelists, mobility grouping on. Total pages: 8289632 <6>[ 0.046748] Policy zone: Normal <6>[ 0.046757] mem auto-init: stack:off, heap alloc:on, heap free:off <6>[ 0.046758] stackdepot: allocating hash table via alloc_large_system_hash <6>[ 0.046760] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) <6>[ 0.047681] stackdepot: allocating space for 8192 stack pools via memblock <4>[ 0.080401] ********************************************************** <4>[ 0.080402] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080402] ** ** <4>[ 0.080402] ** This system shows unhashed kernel memory addresses ** <4>[ 0.080403] ** via the console, logs, and other interfaces. This ** <4>[ 0.080403] ** might reduce the security of your system. ** <4>[ 0.080403] ** ** <4>[ 0.080403] ** If you see this message and you are not debugging ** <4>[ 0.080403] ** the kernel, report this immediately to your system ** <4>[ 0.080404] ** administrator! ** <4>[ 0.080404] ** ** <4>[ 0.080404] ** Use hash_pointers=always to force this mode off ** <4>[ 0.080404] ** ** <4>[ 0.080404] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** <4>[ 0.080404] ********************************************************** <6>[ 0.081487] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 <6>[ 0.089704] ftrace: allocating 60601 entries in 240 pages <6>[ 0.089706] ftrace: allocated 240 pages with 4 groups <6>[ 0.091127] Dynamic Preempt: voluntary <6>[ 0.091622] Running RCU self tests <6>[ 0.091623] Running RCU synchronous self tests <6>[ 0.091624] rcu: Preemptible hierarchical RCU implementation. <6>[ 0.091624] rcu: RCU lockdep checking is enabled. <6>[ 0.091624] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. <6>[ 0.091625] Trampoline variant of Tasks RCU enabled. <6>[ 0.091625] Rude variant of Tasks RCU enabled. <6>[ 0.091625] Tracing variant of Tasks RCU enabled. <6>[ 0.091626] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. <6>[ 0.091626] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 <6>[ 0.091692] Running RCU synchronous self tests <6>[ 0.091696] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091699] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.091701] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. <6>[ 0.102225] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 <6>[ 0.102696] rcu: srcu_init: Setting srcu_struct sizes based on contention. <6>[ 0.103102] Console: colour dummy device 80x25 <6>[ 0.103110] printk: legacy console [tty0] enabled <6>[ 0.104231] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar <6>[ 0.104239] ... MAX_LOCKDEP_SUBCLASSES: 8 <6>[ 0.104242] ... MAX_LOCK_DEPTH: 48 <6>[ 0.104246] ... MAX_LOCKDEP_KEYS: 8192 <6>[ 0.104250] ... CLASSHASH_SIZE: 4096 <6>[ 0.104253] ... MAX_LOCKDEP_ENTRIES: 524288 <6>[ 0.104257] ... MAX_LOCKDEP_CHAINS: 524288 <6>[ 0.104261] ... CHAINHASH_SIZE: 262144 <6>[ 0.104264] memory used by lock dependency info: 54145 kB <6>[ 0.104268] memory used for stack traces: 4224 kB <6>[ 0.104272] per task-struct memory footprint: 1920 bytes <6>[ 0.104323] ACPI: Core revision 20250807 <6>[ 0.105197] hpet: HPET dysfunctional in PC10. Force disabled. <6>[ 0.105260] APIC: Switch to symmetric I/O mode setup <6>[ 0.105266] DMAR: Host address width 38 <6>[ 0.105270] DMAR: DRHD base: 0x000000fc800000 flags: 0x0 <6>[ 0.105304] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105336] DMAR: DRHD base: 0x000000fc810000 flags: 0x0 <6>[ 0.105356] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e <6>[ 0.105382] DMAR: DRHD base: 0x000000fc820000 flags: 0x1 <6>[ 0.105403] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda <6>[ 0.105437] DMAR: SATC flags: 0x1 <6>[ 0.105446] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2 <6>[ 0.105451] DMAR-IR: HPET id 0 under DRHD base 0xfc820000 <6>[ 0.105455] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. <6>[ 0.107510] DMAR-IR: Enabled IRQ remapping in x2apic mode <6>[ 0.112750] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 0.112768] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400) <6>[ 0.112844] CPU0: Thermal monitoring enabled (TM1) <6>[ 0.112850] x86/cpu: User Mode Instruction Prevention (UMIP) activated <6>[ 0.113032] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 <6>[ 0.113037] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 <6>[ 0.113046] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto <6>[ 0.113058] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl <6>[ 0.113065] Spectre V2 : Mitigation: Enhanced / Automatic IBRS <6>[ 0.113070] VMSCAPE: Mitigation: IBPB before exit to userspace <6>[ 0.113075] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization <6>[ 0.113083] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier <6>[ 0.113101] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' <6>[ 0.113108] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' <6>[ 0.113113] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' <6>[ 0.113119] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' <6>[ 0.113126] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers' <6>[ 0.113132] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)' <6>[ 0.113138] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 <6>[ 0.113143] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8 <6>[ 0.113148] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16 <6>[ 0.113153] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24 <6>[ 0.113157] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format. <6>[ 0.113762] Freeing SMP alternatives memory: 56K <6>[ 0.113762] pid_max: default: 32768 minimum: 301 <6>[ 0.113762] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm <6>[ 0.113762] landlock: Up and running. <6>[ 0.113762] Yama: becoming mindful. <6>[ 0.113762] AppArmor: AppArmor initialized <6>[ 0.113762] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113762] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) <6>[ 0.113762] Running RCU synchronous self tests <6>[ 0.113762] Running RCU synchronous self tests <6>[ 0.113762] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1) <6>[ 0.113762] Performance Events: XSAVE Architectural LBR, PEBS fmt6+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver. <6>[ 0.113762] core: cpu_core PMU driver: <6>[ 0.113762] ... version: 6 <6>[ 0.113762] ... bit width: 48 <6>[ 0.113762] ... generic counters: 10 <6>[ 0.113762] ... generic bitmap: 00000000000003ff <6>[ 0.113762] ... fixed-purpose counters: 4 <6>[ 0.113762] ... fixed-purpose bitmap: 000000000000000f <6>[ 0.113762] ... value mask: 0000ffffffffffff <6>[ 0.113762] ... max period: 00007fffffffffff <6>[ 0.113762] ... global_ctrl mask: 0001000f000003ff <6>[ 0.113826] signal: max sigframe size: 3632 <6>[ 0.113849] Estimated ratio of average max frequency by base frequency (times 1024): 1189 <6>[ 0.113951] rcu: Hierarchical SRCU implementation. <6>[ 0.113955] rcu: Max phase no-delay instances is 400. <6>[ 0.114095] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level <6>[ 0.115941] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. <6>[ 0.116206] smp: Bringing up secondary CPUs ... <6>[ 0.116556] smpboot: x86: Booting SMP configuration: <6>[ 0.116563] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 <6>[ 0.010884] core: cpu_atom PMU driver: <6>[ 0.010884] ... version: 6 <6>[ 0.010884] ... bit width: 48 <6>[ 0.010884] ... generic counters: 8 <6>[ 0.010884] ... generic bitmap: 00000000000000ff <6>[ 0.010884] ... fixed-purpose counters: 6 <6>[ 0.010884] ... fixed-purpose bitmap: 0000000000000077 <6>[ 0.010884] ... value mask: 0000ffffffffffff <6>[ 0.010884] ... max period: 00007fffffffffff <6>[ 0.010884] ... global_ctrl mask: 00000077000000ff <6>[ 0.125773] smp: Brought up 1 node, 8 CPUs <6>[ 0.125818] smpboot: Total of 8 processors activated (49766.40 BogoMIPS) <6>[ 0.127905] Memory: 32358224K/33158528K available (25417K kernel code, 5651K rwdata, 9540K rodata, 5704K init, 68232K bss, 777188K reserved, 0K cma-reserved) <6>[ 0.128386] devtmpfs: initialized <6>[ 0.129015] x86/mm: Memory block size: 128MB <6>[ 0.150054] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes) <6>[ 0.150847] Running RCU synchronous self tests <6>[ 0.150860] Running RCU synchronous self tests <6>[ 0.151807] Running RCU Tasks wait API self tests <6>[ 0.151839] Running RCU Tasks Rude wait API self tests <6>[ 0.151839] Running RCU Tasks Trace wait API self tests <6>[ 0.164827] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns <6>[ 0.165258] posixtimers hash table entries: 4096 (order: 6, 294912 bytes, linear) <6>[ 0.165799] futex hash table entries: 2048 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear). <6>[ 0.166155] pinctrl core: initialized pinctrl subsystem <6>[ 0.166770] PM: RTC time: 03:40:59, date: 2025-11-09 <6>[ 0.167525] NET: Registered PF_NETLINK/PF_ROUTE protocol family <6>[ 0.168492] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations <6>[ 0.168798] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations <6>[ 0.169079] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations <6>[ 0.169135] audit: initializing netlink subsys (disabled) <5>[ 0.169172] audit: type=2000 audit(1762659658.056:1): state=initialized audit_enabled=0 res=1 <6>[ 0.170254] thermal_sys: Registered thermal governor 'fair_share' <6>[ 0.170256] thermal_sys: Registered thermal governor 'bang_bang' <6>[ 0.170262] thermal_sys: Registered thermal governor 'step_wise' <6>[ 0.170267] thermal_sys: Registered thermal governor 'user_space' <6>[ 0.170272] thermal_sys: Registered thermal governor 'power_allocator' <6>[ 0.170311] cpuidle: using governor ladder <6>[ 0.170311] cpuidle: using governor menu <6>[ 0.170311] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 0.171124] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff] <6>[ 0.171153] PCI: Using configuration type 1 for base access <6>[ 0.171278] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. <6>[ 0.173046] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages <6>[ 0.173046] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page <6>[ 0.173046] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages <6>[ 0.173046] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page <6>[ 0.177608] raid6: skipped pq benchmark and selected avx2x4 <6>[ 0.177614] raid6: using avx2x2 recovery algorithm <6>[ 0.178093] fbcon: Taking over console <6>[ 0.178220] ACPI: Added _OSI(Module Device) <6>[ 0.178224] ACPI: Added _OSI(Processor Device) <6>[ 0.178228] ACPI: Added _OSI(Processor Aggregator Device) <6>[ 0.183799] Callback from call_rcu_tasks_trace() invoked. <6>[ 0.812972] ACPI: 31 ACPI AML tables successfully acquired and loaded <6>[ 0.853778] ACPI: EC: EC started <6>[ 0.853810] ACPI: EC: interrupt blocked <6>[ 0.861738] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 0.861753] ACPI: EC: Boot ECDT EC used to handle transactions <6>[ 0.899798] Callback from call_rcu_tasks() invoked. <6>[ 1.179517] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.179542] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+ <6>[ 1.251279] ACPI: Interpreter enabled <6>[ 1.251381] ACPI: PM: (supports S0 S4 S5) <6>[ 1.251386] ACPI: Using IOAPIC for interrupt routing <6>[ 1.256647] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.256654] PCI: Ignoring E820 reservations for host bridge windows <6>[ 1.275606] ACPI: Enabled 10 GPEs in block 00 to 7F <6>[ 1.275656] ACPI: Enabled 13 GPEs in block 80 to DF <6>[ 1.318518] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource <6>[ 1.318816] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource <6>[ 1.323421] ACPI: \_SB_.PC00.PAUD: New power resource <6>[ 1.662734] ACPI: \_SB_.PC00.CNVW.WRST: New power resource <6>[ 1.677148] ACPI: \_SB_.PC00.RP02.PXP_: New power resource <6>[ 1.815386] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource <6>[ 1.817305] ACPI: \_SB_.PC00.RP04.PXP_: New power resource <6>[ 1.825747] ACPI: \_SB_.PC00.RP05.PXP_: New power resource <6>[ 1.835190] ACPI: \_SB_.PC00.TBT0: New power resource <6>[ 1.835458] ACPI: \_SB_.PC00.TBT1: New power resource <6>[ 1.835721] ACPI: \_SB_.PC00.D3C_: New power resource <6>[ 2.133695] ACPI: \_TZ_.FN00: New power resource <6>[ 2.135656] ACPI: \_TZ_.FN01: New power resource <6>[ 2.137202] ACPI: \_TZ_.FN02: New power resource <6>[ 2.138734] ACPI: \_TZ_.FN03: New power resource <6>[ 2.140668] ACPI: \_TZ_.FN04: New power resource <6>[ 2.144803] ACPI: \PIN_: New power resource <6>[ 2.155063] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe]) <6>[ 2.155105] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] <6>[ 2.164774] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC] <6>[ 2.184322] PCI host bridge to bus 0000:00 <6>[ 2.184360] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] <6>[ 2.184369] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] <6>[ 2.184376] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] <6>[ 2.184383] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window] <6>[ 2.184391] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window] <6>[ 2.184400] pci_bus 0000:00: root bus resource [bus 00-fe] <6>[ 2.188743] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint <6>[ 2.189969] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint <6>[ 2.190068] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref] <6>[ 2.190078] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref] <6>[ 2.190090] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref] <6>[ 2.190142] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] <6>[ 2.191714] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint <6>[ 2.191748] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit] <6>[ 2.193214] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint <6>[ 2.193245] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit] <6>[ 2.193252] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit] <6>[ 2.194148] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port <6>[ 2.194196] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.194208] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 2.194227] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 2.194343] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold <6>[ 2.194416] pci 0000:00:07.0: PTM enabled (root), 4ns granularity <6>[ 2.198839] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port <6>[ 2.198885] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.198897] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 2.198916] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 2.199033] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold <6>[ 2.199097] pci 0000:00:07.1: PTM enabled (root), 4ns granularity <6>[ 2.203281] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port <6>[ 2.203324] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.203336] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 2.203355] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 2.203472] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold <6>[ 2.203536] pci 0000:00:07.2: PTM enabled (root), 4ns granularity <6>[ 2.208189] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint <6>[ 2.208226] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit] <6>[ 2.208240] pci 0000:00:0a.0: enabling Extended Tags <6>[ 2.208483] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint <6>[ 2.208511] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit] <6>[ 2.208519] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit] <6>[ 2.208976] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.209029] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit] <6>[ 2.209101] pci 0000:00:0d.0: PME# supported from D3hot D3cold <6>[ 2.210712] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.210763] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit] <6>[ 2.210771] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit] <6>[ 2.210830] pci 0000:00:0d.2: supports D1 D2 <6>[ 2.210834] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.212192] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint <6>[ 2.212244] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit] <6>[ 2.212252] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit] <6>[ 2.212310] pci 0000:00:0d.3: supports D1 D2 <6>[ 2.212314] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.213984] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint <6>[ 2.214042] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit] <6>[ 2.214112] pci 0000:00:12.0: PME# supported from D0 D3hot <6>[ 2.216989] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.217082] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit] <6>[ 2.217187] pci 0000:00:13.0: PME# supported from D3hot <6>[ 2.217654] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint <6>[ 2.217707] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit] <6>[ 2.217777] pci 0000:00:14.0: PME# supported from D3hot D3cold <6>[ 2.219691] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint <6>[ 2.219755] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit] <6>[ 2.219786] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit] <6>[ 2.220408] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.220506] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.231008] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.231078] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.243240] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.243327] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.260658] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.260866] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit] <6>[ 2.285030] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint <6>[ 2.285419] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit] <6>[ 2.285895] pci 0000:00:16.0: PME# supported from D3hot <6>[ 2.292443] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port <6>[ 2.292479] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.292488] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 2.292496] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 2.292624] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold <6>[ 2.292702] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity <6>[ 2.297316] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port <6>[ 2.297421] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.297452] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 2.297792] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold <6>[ 2.297996] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity <6>[ 2.303119] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint <6>[ 2.304634] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint <6>[ 2.304748] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit] <6>[ 2.304762] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit] <6>[ 2.305097] pci 0000:00:1f.3: PME# supported from D3hot D3cold <6>[ 2.305607] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint <6>[ 2.305675] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit] <6>[ 2.305687] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf] <6>[ 2.306902] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint <6>[ 2.307085] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff] <6>[ 2.307523] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 2.307704] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 2.307871] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 2.308067] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint <6>[ 2.308138] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff] <6>[ 2.308149] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit] <6>[ 2.308158] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit] <6>[ 2.308323] pci 0000:7f:00.0: supports D1 D2 <6>[ 2.308327] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 2.309249] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.310844] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 2.311289] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint <6>[ 2.311346] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit] <6>[ 2.312569] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring <6>[ 2.312636] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 2.790509] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1) <6>[ 13.541594] Low-power S0 idle used by default for system suspend <6>[ 13.595437] ACPI: EC: interrupt unblocked <6>[ 13.595448] ACPI: EC: event unblocked <6>[ 13.595486] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 <6>[ 13.595492] ACPI: EC: GPE=0x6e <6>[ 13.595499] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete <6>[ 13.595507] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events <6>[ 13.596138] iommu: Default domain type: Translated <6>[ 13.596138] iommu: DMA domain TLB invalidation policy: lazy mode <5>[ 13.601671] SCSI subsystem initialized <7>[ 13.601920] libata version 3.00 loaded. <6>[ 13.602243] ACPI: bus type USB registered <6>[ 13.602956] usbcore: registered new interface driver usbfs <6>[ 13.603105] usbcore: registered new interface driver hub <6>[ 13.603246] usbcore: registered new device driver usb <6>[ 13.603631] pps_core: LinuxPPS API ver. 1 registered <6>[ 13.603644] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <6>[ 13.603704] PTP clock support registered <6>[ 13.604181] EDAC MC: Ver: 3.0.0 <6>[ 13.605897] efivars: Registered efivars operations <6>[ 13.608284] NetLabel: Initializing <6>[ 13.608290] NetLabel: domain hash size = 128 <6>[ 13.608294] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO <6>[ 13.608364] NetLabel: unlabeled traffic allowed by default <6>[ 13.608380] mctp: management component transport protocol core <6>[ 13.608386] NET: Registered PF_MCTP protocol family <6>[ 13.608433] PCI: Using ACPI for IRQ routing <7>[ 13.628302] PCI: pci_cache_line_size set to 64 bytes <6>[ 13.628556] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window <7>[ 13.628653] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] <7>[ 13.628664] e820: reserve RAM buffer [mem 0x68ff8000-0x6bffffff] <7>[ 13.628667] e820: reserve RAM buffer [mem 0x6992d000-0x6bffffff] <7>[ 13.628670] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff] <7>[ 13.628673] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff] <6>[ 13.628987] pci 0000:00:02.0: vgaarb: setting as boot VGA device <6>[ 13.628987] pci 0000:00:02.0: vgaarb: bridge control possible <6>[ 13.628987] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none <6>[ 13.628987] vgaarb: loaded <7>[ 13.630757] Monitor-Mwait will be used to enter C-1 state <7>[ 13.630769] Monitor-Mwait will be used to enter C-2 state <7>[ 13.630773] Monitor-Mwait will be used to enter C-3 state <6>[ 13.636223] clocksource: Switched to clocksource tsc-early <5>[ 13.647680] VFS: Disk quotas dquot_6.6.0 <6>[ 13.647749] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 13.651141] AppArmor: AppArmor Filesystem Enabled <6>[ 13.651604] pnp: PnP ACPI init <6>[ 13.653833] system 00:00: [io 0x0680-0x069f] has been reserved <6>[ 13.653860] system 00:00: [io 0x164e-0x164f] has been reserved <6>[ 13.657512] system 00:02: [io 0x06a4] has been reserved <6>[ 13.657537] system 00:02: [io 0x06a0] has been reserved <6>[ 13.714195] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved <6>[ 13.714221] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved <6>[ 13.714241] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved <6>[ 13.714258] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved <6>[ 13.714271] system 00:03: [mem 0xfed20000-0xfed7ffff] has been reserved <6>[ 13.714287] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved <6>[ 13.714303] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved <6>[ 13.714316] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved <6>[ 13.719355] system 00:04: [io 0x2000-0x20fe] has been reserved <6>[ 13.723509] system 00:06: [io 0x1854-0x1857] has been reserved <6>[ 13.723795] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved <6>[ 13.731469] pnp: PnP ACPI: found 8 devices <6>[ 13.748296] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns <6>[ 13.748676] NET: Registered PF_INET protocol family <6>[ 13.748983] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.752367] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear) <6>[ 13.752691] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) <6>[ 13.752982] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) <6>[ 13.754288] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage) <6>[ 13.756361] TCP: Hash tables configured (established 262144 bind 65536) <6>[ 13.757046] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.758678] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear) <6>[ 13.760364] NET: Registered PF_UNIX/PF_LOCAL protocol family <6>[ 13.760472] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000 <6>[ 13.760491] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000 <6>[ 13.760506] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000 <6>[ 13.760582] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned <6>[ 13.760592] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned <6>[ 13.760601] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned <6>[ 13.760612] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned <6>[ 13.760644] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned <6>[ 13.760670] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned <6>[ 13.760692] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned <6>[ 13.760718] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned <6>[ 13.760762] pci 0000:00:07.0: PCI bridge to [bus 01-2a] <6>[ 13.760776] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff] <6>[ 13.760788] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff] <6>[ 13.760800] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.760815] pci 0000:00:07.1: PCI bridge to [bus 2b-54] <6>[ 13.760828] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff] <6>[ 13.760840] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff] <6>[ 13.760851] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.760867] pci 0000:00:07.2: PCI bridge to [bus 55-7e] <6>[ 13.760875] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff] <6>[ 13.760905] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff] <6>[ 13.760917] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.760933] pci 0000:00:1c.0: PCI bridge to [bus 7f] <6>[ 13.760941] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] <6>[ 13.760952] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff] <6>[ 13.760967] pci 0000:00:1c.4: PCI bridge to [bus 80] <6>[ 13.761006] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff] <6>[ 13.761053] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] <6>[ 13.761061] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] <6>[ 13.761069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] <6>[ 13.761078] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window] <6>[ 13.761087] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window] <6>[ 13.761097] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] <6>[ 13.761105] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff] <6>[ 13.761113] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref] <6>[ 13.761124] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff] <6>[ 13.761131] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff] <6>[ 13.761139] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref] <6>[ 13.761150] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff] <6>[ 13.761157] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff] <6>[ 13.761165] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref] <6>[ 13.761176] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff] <6>[ 13.761183] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff] <6>[ 13.761191] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff] <6>[ 13.762604] pci 0000:00:0d.0: enabling device (0000 -> 0002) <6>[ 13.764790] PCI: CLS 0 bytes, default 64 <6>[ 13.764961] DMAR: No RMRR found <6>[ 13.764979] DMAR: No ATSR found <6>[ 13.764986] DMAR: dmar1: Using Queued invalidation <6>[ 13.764996] DMAR: dmar0: Using Queued invalidation <6>[ 13.765004] DMAR: dmar2: Using Queued invalidation <6>[ 13.766225] pci 0000:00:04.0: Adding to iommu group 0 <6>[ 13.766348] pci 0000:00:05.0: Adding to iommu group 1 <6>[ 13.766450] pci 0000:00:0a.0: Adding to iommu group 2 <6>[ 13.766535] pci 0000:00:0b.0: Adding to iommu group 3 <6>[ 13.771313] pci 0000:00:02.0: Adding to iommu group 4 <6>[ 13.772872] pci 0000:00:00.0: Adding to iommu group 5 <6>[ 13.772984] pci 0000:00:07.0: Adding to iommu group 6 <6>[ 13.773087] pci 0000:00:07.1: Adding to iommu group 7 <6>[ 13.773178] pci 0000:00:07.2: Adding to iommu group 8 <6>[ 13.773300] pci 0000:00:0d.0: Adding to iommu group 9 <6>[ 13.773361] pci 0000:00:0d.2: Adding to iommu group 9 <6>[ 13.773423] pci 0000:00:0d.3: Adding to iommu group 9 <6>[ 13.773515] pci 0000:00:12.0: Adding to iommu group 10 <6>[ 13.773618] pci 0000:00:13.0: Adding to iommu group 11 <6>[ 13.773722] pci 0000:00:14.0: Adding to iommu group 12 <6>[ 13.773783] pci 0000:00:14.2: Adding to iommu group 12 <6>[ 13.774132] pci 0000:00:15.0: Adding to iommu group 13 <6>[ 13.774197] pci 0000:00:15.1: Adding to iommu group 13 <6>[ 13.774258] pci 0000:00:15.2: Adding to iommu group 13 <6>[ 13.774322] pci 0000:00:15.3: Adding to iommu group 13 <6>[ 13.774412] pci 0000:00:16.0: Adding to iommu group 14 <6>[ 13.774499] pci 0000:00:1c.0: Adding to iommu group 15 <6>[ 13.774607] pci 0000:00:1c.4: Adding to iommu group 16 <6>[ 13.774729] pci 0000:00:1f.0: Adding to iommu group 17 <6>[ 13.774792] pci 0000:00:1f.3: Adding to iommu group 17 <6>[ 13.774859] pci 0000:00:1f.4: Adding to iommu group 17 <6>[ 13.774929] pci 0000:00:1f.5: Adding to iommu group 17 <6>[ 13.775015] pci 0000:7f:00.0: Adding to iommu group 18 <6>[ 13.775129] pci 0000:80:00.0: Adding to iommu group 19 <6>[ 13.787456] DMAR: Intel(R) Virtualization Technology for Directed I/O <6>[ 13.787475] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 13.787484] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB) <6>[ 13.793593] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns <6>[ 13.794008] clocksource: Switched to clocksource tsc <6>[ 13.794399] platform rtc_cmos: registered platform RTC device (no PNP device found) <5>[ 13.801307] Initialise system trusted keyrings <5>[ 13.801391] Key type blacklist registered <6>[ 13.801632] workingset: timestamp_bits=36 max_order=23 bucket_order=0 <6>[ 13.812608] squashfs: version 4.0 (2009/01/31) Phillip Lougher <6>[ 13.812744] ntfs3: Enabled Linux POSIX ACLs support <6>[ 13.812752] ntfs3: Read-only LZX/Xpress compression included <5>[ 13.813382] integrity: Platform Keyring initialized <5>[ 13.813409] integrity: Machine keyring initialized <6>[ 13.820077] xor: automatically using best checksumming function avx <5>[ 13.820089] Key type asymmetric registered <5>[ 13.820102] Asymmetric key parser 'x509' registered <6>[ 13.820230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242) <6>[ 13.820533] io scheduler mq-deadline registered <6>[ 13.821587] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 13.823292] pcieport 0000:00:07.0: PME: Signaling with IRQ 126 <6>[ 13.823669] pcieport 0000:00:07.0: AER: enabled with IRQ 126 <6>[ 13.824935] pcieport 0000:00:07.1: PME: Signaling with IRQ 127 <6>[ 13.825258] pcieport 0000:00:07.1: AER: enabled with IRQ 127 <6>[ 13.826496] pcieport 0000:00:07.2: PME: Signaling with IRQ 128 <6>[ 13.826774] pcieport 0000:00:07.2: AER: enabled with IRQ 128 <6>[ 13.827895] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129 <6>[ 13.828229] pcieport 0000:00:1c.0: AER: enabled with IRQ 129 <6>[ 13.829775] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130 <6>[ 13.830156] pcieport 0000:00:1c.4: AER: enabled with IRQ 130 <6>[ 13.832056] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0 <6>[ 13.832288] ACPI: button: Lid Switch [LID0] <6>[ 13.832582] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 <6>[ 13.832798] ACPI: button: Sleep Button [SLPB] <6>[ 13.833062] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 <6>[ 13.833415] ACPI: button: Power Button [PWRB] <6>[ 14.000142] thermal LNXTHERM:00: registered as thermal_zone0 <6>[ 14.000161] ACPI: thermal: Thermal Zone [TZ00] (67 C) <6>[ 14.001696] ACPI: battery: Slot [BAT1] (battery absent) <6>[ 14.002001] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled <6>[ 14.003274] ACPI: battery: Slot [BAT0] (battery present) <6>[ 14.025465] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A <6>[ 14.042489] serial 0000:00:12.0: enabling device (0000 -> 0002) <5>[ 14.046071] hpet_acpi_add: no address or irqs in _CRS <6>[ 14.046329] Linux agpgart interface v0.103 <6>[ 14.047229] ACPI: bus type drm_connector registered <7>[ 14.048315] initcall simpledrm_platform_driver_init blacklisted <6>[ 14.067378] loop: module loaded <6>[ 14.102938] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) <6>[ 14.216894] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) <6>[ 14.516332] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) <6>[ 14.692594] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) <5>[ 14.840718] Key type psk registered <6>[ 14.845602] nvme 0000:80:00.0: platform quirk: setting simple suspend <6>[ 14.847286] nvme nvme0: pci function 0000:80:00.0 <6>[ 14.847668] tun: Universal TUN/TAP device driver, 1.6 <6>[ 14.852154] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.853064] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1 <6>[ 14.855175] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.858548] xhci_hcd 0000:00:0d.0: xHCI Host Controller <6>[ 14.858594] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2 <6>[ 14.858626] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.859335] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 14.859372] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.859390] usb usb1: Product: xHCI Host Controller <6>[ 14.859403] usb usb1: Manufacturer: Linux 6.18.0-rc4-lgci-xe-xe-4074-2bc418aa7efaae562+ xhci-hcd <6>[ 14.859424] usb usb1: SerialNumber: 0000:00:0d.0 <6>[ 14.861223] hub 1-0:1.0: USB hub found <6>[ 14.861364] hub 1-0:1.0: 1 port detected <6>[ 14.867337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 14.867357] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.867371] usb usb2: Product: xHCI Host Controller <6>[ 14.867380] usb usb2: Manufacturer: Linux 6.18.0-rc4-lgci-xe-xe-4074-2bc418aa7efaae562+ xhci-hcd <6>[ 14.867394] usb usb2: SerialNumber: 0000:00:0d.0 <6>[ 14.868344] hub 2-0:1.0: USB hub found <6>[ 14.868395] hub 2-0:1.0: 3 ports detected <6>[ 14.888904] nvme nvme0: 8/0/0 default/read/poll queues <6>[ 14.894802] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.894851] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 <6>[ 14.896851] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810 <6>[ 14.900197] xhci_hcd 0000:00:14.0: xHCI Host Controller <6>[ 14.900224] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 <6>[ 14.900246] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed <6>[ 14.900494] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18 <6>[ 14.900509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.900519] usb usb3: Product: xHCI Host Controller <6>[ 14.900526] usb usb3: Manufacturer: Linux 6.18.0-rc4-lgci-xe-xe-4074-2bc418aa7efaae562+ xhci-hcd <6>[ 14.900539] usb usb3: SerialNumber: 0000:00:14.0 <6>[ 14.901399] hub 3-0:1.0: USB hub found <6>[ 14.901454] hub 3-0:1.0: 8 ports detected <6>[ 14.901787] nvme0n1: p1 p2 <6>[ 14.931312] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18 <6>[ 14.931336] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 14.931347] usb usb4: Product: xHCI Host Controller <6>[ 14.931355] usb usb4: Manufacturer: Linux 6.18.0-rc4-lgci-xe-xe-4074-2bc418aa7efaae562+ xhci-hcd <6>[ 14.931367] usb usb4: SerialNumber: 0000:00:14.0 <6>[ 14.932231] hub 4-0:1.0: USB hub found <6>[ 14.932284] hub 4-0:1.0: 2 ports detected <6>[ 14.940422] usbcore: registered new interface driver usb-storage <6>[ 14.940610] usbcore: registered new interface driver usbserial_generic <6>[ 14.940704] usbserial: USB Serial support registered for generic <6>[ 14.940781] usbcore: registered new interface driver ftdi_sio <6>[ 14.940819] usbserial: USB Serial support registered for FTDI USB Serial Device <6>[ 14.941536] usbcore: registered new interface driver pl2303 <6>[ 14.941574] usbserial: USB Serial support registered for pl2303 <6>[ 14.941712] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 <4>[ 14.941722] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp <3>[ 15.653534] i8042: Can't read CTR while initializing i8042 <3>[ 15.653545] i8042 i8042: probe with driver i8042 failed with error -5 <6>[ 15.654756] mousedev: PS/2 mouse device common for all mice <6>[ 15.655650] rtc_cmos rtc_cmos: RTC can wake from S4 <6>[ 15.658288] rtc_cmos rtc_cmos: registered as rtc0 <6>[ 15.658496] rtc_cmos rtc_cmos: setting system clock to 2025-11-09T03:41:14 UTC (1762659674) <6>[ 15.658635] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram <6>[ 15.658674] i2c_dev: i2c /dev entries driver <6>[ 15.667131] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0) <6>[ 15.667159] softdog: soft_reboot_cmd= soft_active_on_boot=0 <4>[ 15.667180] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. <6>[ 15.667246] device-mapper: uevent: version 1.0.3 <6>[ 15.668238] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev <6>[ 15.668285] intel_pstate: Intel P-state driver initializing <6>[ 15.672740] Hybrid CPU capacity scaling enabled <6>[ 15.673140] processor cpu0: EM: created perf domain <6>[ 15.673443] processor cpu1: EM: created perf domain <6>[ 15.673726] processor cpu2: EM: created perf domain <6>[ 15.674018] processor cpu3: EM: created perf domain <6>[ 15.674316] processor cpu4: EM: created perf domain <6>[ 15.674608] processor cpu5: EM: created perf domain <6>[ 15.674929] processor cpu6: EM: created perf domain <6>[ 15.675263] processor cpu7: EM: created perf domain <6>[ 15.677062] intel_pstate: HWP enabled <6>[ 15.677073] sdhci: Secure Digital Host Controller Interface driver <6>[ 15.677083] sdhci: Copyright(c) Pierre Ossman <6>[ 15.677326] sdhci-pltfm: SDHCI platform and OF driver helper <6>[ 15.681188] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c] <6>[ 15.682070] drop_monitor: Initializing network drop monitor service <6>[ 15.682274] NET: Registered PF_INET6 protocol family <6>[ 15.683399] Segment Routing with IPv6 <6>[ 15.683438] In-situ OAM (IOAM) with IPv6 <6>[ 15.683491] NET: Registered PF_PACKET protocol family <5>[ 15.683789] Key type dns_resolver registered <4>[ 15.688653] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' <6>[ 15.689267] microcode: Current revision: 0x00000124 <6>[ 15.690288] IPI shorthand broadcast: enabled <6>[ 15.713314] sched_clock: Marking stable (15703001040, 9884634)->(15814508972, -101623298) <6>[ 15.714079] registered taskstats version 1 <5>[ 15.715630] Loading compiled-in X.509 certificates <6>[ 15.760065] Demotion targets for Node 0: null <6>[ 15.760351] kmemleak: Kernel memory leak detector initialized (mem pool available: 14946) <6>[ 15.760353] kmemleak: Automatic memory scanning thread started <5>[ 15.760625] Key type .fscrypt registered <5>[ 15.760630] Key type fscrypt-provisioning registered <6>[ 15.763563] Btrfs loaded, zoned=yes, fsverity=yes <5>[ 15.766117] Key type encrypted registered <6>[ 15.766128] AppArmor: AppArmor sha256 policy hashing enabled <6>[ 15.766263] ima: No TPM chip found, activating TPM-bypass! <5>[ 15.766287] Loading compiled-in module X.509 certificates <5>[ 15.766937] Loaded X.509 cert 'Build time autogenerated kernel key: 50d7322add9e296ff20f52ebaebfb93663dfc689' <6>[ 15.766949] ima: Allocated hash algorithm: sha256 <6>[ 15.766992] ima: No architecture policies found <6>[ 15.767073] evm: Initialising EVM extended attributes: <6>[ 15.767077] evm: security.selinux <6>[ 15.767080] evm: security.SMACK64 <6>[ 15.767083] evm: security.SMACK64EXEC <6>[ 15.767086] evm: security.SMACK64TRANSMUTE <6>[ 15.767089] evm: security.SMACK64MMAP <6>[ 15.767092] evm: security.apparmor <6>[ 15.767095] evm: security.ima <6>[ 15.767098] evm: security.capability <6>[ 15.767101] evm: HMAC attrs: 0x1 <6>[ 15.768994] PM: Magic number: 1:156:664 <6>[ 15.769168] netconsole: network logging started <6>[ 15.769736] RAS: Correctable Errors collector initialized. <6>[ 15.769870] clk: Disabling unused clocks <6>[ 15.769880] PM: genpd: Disabling unused power domains <4>[ 15.770696] check access for rdinit=/init failed: -2, ignoring <6>[ 15.770705] md: Waiting for all devices to be available before autodetect <6>[ 15.770711] md: If you don't use raid, use raid=noautodetect <6>[ 15.770717] md: Autodetecting RAID arrays. <6>[ 15.770724] md: autorun ... <6>[ 15.770727] md: ... autorun DONE. <6>[ 15.819118] EXT4-fs (nvme0n1p2): mounted filesystem ab02bed0-b378-4950-9087-63334df65791 ro with ordered data mode. Quota mode: none. <6>[ 15.819185] VFS: Mounted root (ext4 filesystem) readonly on device 259:2. <6>[ 15.819788] devtmpfs: mounted <6>[ 15.835813] Freeing unused decrypted memory: 2036K <6>[ 15.836682] Freeing unused kernel image (initmem) memory: 5704K <6>[ 15.836706] Write protecting the kernel read-only data: 36864k <6>[ 15.837459] Freeing unused kernel image (text/rodata gap) memory: 1204K <6>[ 15.837698] Freeing unused kernel image (rodata/data gap) memory: 700K <6>[ 15.842177] x86/mm: Checked W+X mappings: passed, no W+X pages found. <6>[ 15.842203] Run /sbin/init as init process <7>[ 15.842207] with arguments: <7>[ 15.842208] /sbin/init <7>[ 15.842209] with environment: <7>[ 15.842210] HOME=/ <7>[ 15.842210] TERM=linux <7>[ 15.888816] systemd[1]: Inserted module 'autofs4' <7>[ 15.909819] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) <7>[ 15.909852] systemd[1]: Detected architecture x86-64. <7>[ 15.911255] systemd[1]: Hostname set to . <7>[ 16.182593] systemd[1]: Queued start job for default target graphical.target. <7>[ 16.218484] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. <7>[ 16.221497] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. <7>[ 16.223372] systemd[1]: Created slice user.slice - User and Session Slice. <7>[ 16.223658] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. <7>[ 16.224343] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. <7>[ 16.224457] systemd[1]: Expecting device dev-disk-by\x2duuid-BBB3\x2d0D61.device - /dev/disk/by-uuid/BBB3-0D61... <7>[ 16.224537] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. <7>[ 16.224617] systemd[1]: Reached target slices.target - Slice Units. <7>[ 16.224682] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps. <7>[ 16.224747] systemd[1]: Reached target snapd.mounts.target - Mounted snaps. <7>[ 16.224813] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. <7>[ 16.225050] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs. <7>[ 16.225416] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket. <7>[ 16.225682] systemd[1]: Listening on multipathd.socket - multipathd control socket. <7>[ 16.225995] systemd[1]: Listening on syslog.socket - Syslog Socket. <7>[ 16.226245] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. <7>[ 16.226439] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. <7>[ 16.226708] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). <7>[ 16.227039] systemd[1]: Listening on systemd-journald.socket - Journal Socket. <7>[ 16.227330] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket. <7>[ 16.227513] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 16.227788] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. <7>[ 16.228056] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. <7>[ 16.231352] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... <7>[ 16.234029] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... <7>[ 16.236711] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... <7>[ 16.240152] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... <7>[ 16.246849] systemd[1]: Starting systemd-journald.service - Journal Service... <7>[ 16.250324] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... <7>[ 16.253213] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... <7>[ 16.256785] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... <7>[ 16.259729] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... <7>[ 16.262349] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... <7>[ 16.265924] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... <7>[ 16.269217] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... <7>[ 16.273543] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... <7>[ 16.278662] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... <7>[ 16.279335] systemd-journald[207]: Collecting audit messages is disabled. <7>[ 16.284593] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics... <7>[ 16.285144] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl). <6>[ 16.290537] pstore: Using crash dump compression: deflate <7>[ 16.291224] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device... <6>[ 16.292632] pstore: Registered efi_pstore as persistent store backend <6>[ 16.295705] fuse: init (API version 7.45) <7>[ 16.296386] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... <7>[ 16.296487] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 16.296553] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki). <7>[ 16.300027] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... <7>[ 16.305840] systemd[1]: Started systemd-journald.service - Journal Service. <6>[ 16.430002] EXT4-fs (nvme0n1p2): re-mounted ab02bed0-b378-4950-9087-63334df65791 r/w. <6>[ 16.454996] Adding 8388604k swap on /swap.img. Priority:-2 extents:65 across:341704704k SS <7>[ 16.465083] systemd-journald[207]: Received client request to flush runtime journal. <7>[ 16.481437] systemd-journald[207]: /var/log/journal/b767726c6704475694a1e926e667900b/system.journal: Journal file uses a different sequence number ID, rotating. <7>[ 16.481448] systemd-journald[207]: Rotating system journal. <4>[ 17.230529] nvme nvme0: using unchecked data buffer <6>[ 17.333766] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002) <6>[ 17.350359] intel_pmc_ssram_telemetry 0000:00:14.2: enabling device (0000 -> 0002) <6>[ 17.381144] input: Intel HID events as /devices/platform/INTC107B:00/input/input3 <6>[ 17.394840] intel-hid INTC107B:00: platform supports 5 button array <6>[ 17.413762] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4 <3>[ 17.532777] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121 <3>[ 17.532966] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121 <5>[ 17.534753] audit: type=1400 audit(1762659676.374:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=420 comm="apparmor_parser" <5>[ 17.535121] audit: type=1400 audit(1762659676.375:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=422 comm="apparmor_parser" <5>[ 17.535391] audit: type=1400 audit(1762659676.375:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=421 comm="apparmor_parser" <5>[ 17.537266] audit: type=1400 audit(1762659676.377:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=423 comm="apparmor_parser" <5>[ 17.539591] audit: type=1400 audit(1762659676.379:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=424 comm="apparmor_parser" <5>[ 17.542092] audit: type=1400 audit(1762659676.382:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=426 comm="apparmor_parser" <5>[ 17.544780] audit: type=1400 audit(1762659676.384:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=427 comm="apparmor_parser" <6>[ 17.545793] pci 0000:00:05.0: Setting to D3hot <5>[ 17.547422] audit: type=1400 audit(1762659676.387:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=428 comm="apparmor_parser" <5>[ 17.548154] audit: type=1400 audit(1762659676.388:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=429 comm="apparmor_parser" <5>[ 17.552376] audit: type=1400 audit(1762659676.392:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=430 comm="apparmor_parser" <6>[ 17.556920] pci 0000:00:0b.0: Setting to D3hot <6>[ 17.569650] intel_pmc_core INT33A1:00: initialized <6>[ 17.899179] ACPI: bus type thunderbolt registered <6>[ 17.918011] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002) <6>[ 17.939220] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43 <6>[ 17.939229] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS <6>[ 17.961283] idma64 idma64.0: Found Intel integrated DMA 64-bit <6>[ 17.961755] idma64 idma64.1: Found Intel integrated DMA 64-bit <6>[ 18.004665] idma64 idma64.2: Found Intel integrated DMA 64-bit <6>[ 18.005328] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0 <6>[ 18.034678] idma64 idma64.3: Found Intel integrated DMA 64-bit <6>[ 18.077589] r8169 0000:7f:00.0: enabling device (0000 -> 0003) <6>[ 18.140508] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402) <6>[ 18.143625] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer <6>[ 18.143631] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules <6>[ 18.143634] RAPL PMU: hw unit of domain package 2^-14 Joules <6>[ 18.143635] RAPL PMU: hw unit of domain dram 2^-14 Joules <6>[ 18.143636] RAPL PMU: hw unit of domain psys 2^-14 Joules <6>[ 18.148976] intel_rapl_common: Found RAPL domain package <6>[ 18.148981] intel_rapl_common: Found RAPL domain dram <6>[ 18.179942] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) <6>[ 18.184311] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.212578] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c9:30:ac, XID 541, IRQ 175 <6>[ 18.212590] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] <6>[ 18.216613] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.269190] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0 <6>[ 18.276693] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.419812] block nvme0n1: No UUID available providing old NGUID <6>[ 18.565569] /proc/cgroups lists only v1 controllers, use cgroup.controllers of root cgroup for v2 info <6>[ 18.617507] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.676736] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.680068] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin <6>[ 18.691252] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.698744] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 18.705976] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888 <6>[ 18.705985] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716 <6>[ 18.705987] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472 <6>[ 18.807306] intel_rapl_common: Found RAPL domain package <6>[ 18.807328] intel_rapl_common: Found RAPL domain core <6>[ 18.807331] intel_rapl_common: Found RAPL domain dram <6>[ 18.807333] intel_rapl_common: Found RAPL domain psys <6>[ 18.867617] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 18.892462] spi-nor spi0.0: supply vcc not found, using dummy regulator <6>[ 18.904176] loop0: detected capacity change from 0 to 8 <6>[ 18.917316] r8169 0000:7f:00.0 enp127s0: renamed from eth0 <6>[ 18.943568] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <5>[ 18.961994] Creating 1 MTD partitions on "0000:00:1f.5": <5>[ 18.962014] 0x000000000000-0x000002000000 : "BIOS" <6>[ 19.072198] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.126388] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC) <6>[ 19.285332] r8169 0000:7f:00.0 enp127s0: Link is Down <6>[ 19.379661] Consider using thermal netlink events interface <6>[ 19.551647] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.711403] hid: raw HID events driver (C) Jiri Kosina <6>[ 19.719161] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6 <6>[ 19.750486] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.756671] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.757962] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.758555] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.760211] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.761023] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.761077] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.763489] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.764014] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.764648] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.769699] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.772676] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.776735] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.777955] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.781654] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.783135] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.787691] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.787702] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on <6>[ 19.791325] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.792418] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.795538] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.795739] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on <6>[ 19.798674] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.873402] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.880567] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.883811] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.890714] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.893510] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.897182] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.902551] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.906579] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.910943] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.914421] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.918113] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.922563] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.926984] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.931646] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.935267] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.940473] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.943807] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.948518] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.953470] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 19.959000] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 21.331596] typec port0: bound usb3-port1 (ops connector_ops) <6>[ 21.331656] typec port0: bound usb2-port1 (ops connector_ops) <6>[ 21.331697] typec port0: bound usb4_port1 (ops connector_ops [thunderbolt]) <6>[ 22.368351] typec port1: bound usb3-port2 (ops connector_ops) <6>[ 22.368394] typec port1: bound usb2-port2 (ops connector_ops) <6>[ 22.368431] typec port1: bound usb4_port3 (ops connector_ops [thunderbolt]) <6>[ 22.953179] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off <6>[ 30.295532] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <4>[ 30.299731] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component <7>[ 37.464472] systemd-journald[207]: /var/log/journal/b767726c6704475694a1e926e667900b/user-1000.journal: Journal file uses a different sequence number ID, rotating. <7>[ 76.887359] [IGT] xe_module_load: executing <4>[ 76.887528] NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030 <7>[ 76.893323] [IGT] xe_module_load: starting subtest load <5>[ 77.142657] Setting dangerous option force_probe - tainting kernel <6>[ 77.145903] xe 0000:00:02.0: vgaarb: deactivate vga console <6>[ 77.147384] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0 <7>[ 77.147395] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0 <7>[ 77.147521] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**) <7>[ 77.147632] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none) <7>[ 77.149481] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes <7>[ 77.149602] xe 0000:00:02.0: [drm:intel_pch_detect [xe]] PCH not involved in display, using fake PCH type 1027 for south display <7>[ 77.149705] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled) <7>[ 77.149815] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6ff04018 <7>[ 77.149931] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0 <7>[ 77.150033] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported <7>[ 77.150143] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported <7>[ 77.150270] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported <7>[ 77.150382] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present <7>[ 77.150505] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA) <7>[ 77.150601] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM type: LPDDR5 <7>[ 77.150706] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8 <7>[ 77.150806] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num QGV points 4 <7>[ 77.150904] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num PSF GV points 0 <7>[ 77.151007] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152 <7>[ 77.151114] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296 <7>[ 77.151267] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392 <7>[ 77.151406] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520 <7>[ 77.151519] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400 <7>[ 77.151626] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800 <7>[ 77.151727] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 77.151826] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 77.151925] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400 <7>[ 77.152023] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 77.152125] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 77.152243] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 77.152367] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400 <7>[ 77.152491] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 77.152605] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 77.152708] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 77.152807] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400 <7>[ 77.152903] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 77.153002] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 77.153098] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 77.153263] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400 <7>[ 77.153402] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 77.153535] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 77.153627] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 77.153714] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400 <7>[ 77.153801] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800 <7>[ 77.153886] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400 <7>[ 77.153969] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544 <7>[ 77.154059] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz <7>[ 77.154544] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz <7>[ 77.154683] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 262 <7>[ 77.154806] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7) <7>[ 77.154917] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5) <7>[ 77.155024] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100) <7>[ 77.155133] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19) <7>[ 77.155268] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 850, min size 848) <7>[ 77.155400] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34) <7>[ 77.155512] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers <7>[ 77.155628] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148) <7>[ 77.155739] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1382, min size 1366) <7>[ 77.155850] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305) <7>[ 77.155948] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136) <7>[ 77.156045] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822) <7>[ 77.156220] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210) <7>[ 77.156370] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0 <7>[ 77.156490] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2 <7>[ 77.156583] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806 <7>[ 77.156679] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 77.156772] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 77.156864] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6 <7>[ 77.156954] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping <7>[ 77.157043] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0 <7>[ 77.157139] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 77.157254] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 77.157368] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0 <7>[ 77.157480] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a <7>[ 77.157595] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 77.157746] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1 <7>[ 77.157888] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 77.158138] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf <7>[ 77.158343] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic. <7>[ 77.158492] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on <7>[ 77.158604] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 77.158733] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00 <7>[ 77.158883] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2 <6>[ 77.158992] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=io+mem <7>[ 77.159007] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A <7>[ 77.159130] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B <7>[ 77.159251] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C <7>[ 77.159376] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D <7>[ 77.159602] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC <7>[ 77.160014] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin <7>[ 77.160792] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1 <7>[ 77.160924] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us <7>[ 77.161021] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM0 latency not provided <7>[ 77.161136] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM1 latency 100 (100.0 usec) <7>[ 77.161246] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM2 latency 100 (100.0 usec) <7>[ 77.161356] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM3 latency 100 (100.0 usec) <7>[ 77.161463] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM4 latency 93 (93.0 usec) <7>[ 77.161546] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] original WM5 latency 100 (100.0 usec) <7>[ 77.161626] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM0 latency 6 (6.0 usec) <7>[ 77.161706] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM1 latency 106 (106.0 usec) <7>[ 77.161785] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM2 latency 106 (106.0 usec) <7>[ 77.161863] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM3 latency 106 (106.0 usec) <7>[ 77.161940] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM4 latency 106 (106.0 usec) <7>[ 77.162018] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] adjusted WM5 latency 106 (106.0 usec) <7>[ 77.165702] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0: <7>[ 77.165860] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0 <7>[ 77.166002] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL) <7>[ 77.166149] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP) <7>[ 77.166287] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL) <7>[ 77.166434] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57c45700 (EVT_HTP) <7>[ 77.166586] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1: <7>[ 77.166728] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0 <7>[ 77.166869] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 77.167012] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP) <7>[ 77.167028] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available. <7>[ 77.167191] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 77.167330] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP) <7>[ 77.167468] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 77.167605] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP) <7>[ 77.167752] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2: <7>[ 77.167886] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0 <7>[ 77.168020] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 77.168165] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP) <7>[ 77.168299] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 77.168432] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP) <7>[ 77.168564] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 77.168701] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP) <7>[ 77.168854] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3: <7>[ 77.168997] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0 <7>[ 77.169139] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling) <7>[ 77.169275] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP) <7>[ 77.169407] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling) <7>[ 77.169535] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP) <7>[ 77.169659] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling) <7>[ 77.169783] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP) <7>[ 77.170226] xe 0000:00:02.0: [drm:intel_cdclk_read_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0 <7>[ 77.170395] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz <7>[ 77.170554] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz <7>[ 77.170758] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:207:DDI A/PHY A] Using AUX CH A (VBT) <7>[ 77.170999] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:207:DDI A/PHY A] <7>[ 77.171245] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2 <7>[ 77.171413] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2 <7>[ 77.171561] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless <7>[ 77.171712] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa <7>[ 77.171856] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300 <7>[ 77.171997] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002 <7>[ 77.172149] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName <7>[ 77.172290] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz <7>[ 77.172430] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0 <7>[ 77.172596] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:207:DDI A/PHY A] initial power sequencer: PPS 0 <7>[ 77.172842] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 77.172980] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 77.173119] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 77.173248] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 77.173375] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 77.173639] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 77.173936] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 77.175159] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 turning VDD on <7>[ 77.175471] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f <7>[ 77.177160] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 77.177721] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000 <7>[ 77.178536] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e <7>[ 77.179457] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3 <7>[ 77.179916] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported <6>[ 77.181341] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.29) <7>[ 77.182031] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 77.191276] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 77.191288] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 77.191290] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 77.191292] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 77.191295] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 77.191298] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 77.191300] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD monitor <5>[ 77.191306] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 77.191307] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD size 20, SAD count 0 <5>[ 77.191310] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 77.191356] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 77.191358] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 77.191359] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 77.191375] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:208:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 77.191506] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:208:eDP-1] using alternate EDID fixed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 77.191827] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:208:eDP-1] Performing OUI wait (0 ms) <7>[ 77.192166] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:208:eDP-1] Detected unsupported HDR backlight interface version 0 <7>[ 77.192297] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:208:eDP-1] DRRS type: seamless <7>[ 77.192449] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:208:eDP-1] Using native PCH PWM for backlight control (controller=0) <7>[ 77.192583] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:208:eDP-1] backlight initialized, enabled, brightness 192000/192000 <7>[ 77.192743] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000 <7>[ 77.192844] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000 <7>[ 77.192933] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100 <7>[ 77.193020] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500 <7>[ 77.193116] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200 <7>[ 77.193257] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60 <7>[ 77.193487] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:216:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT) <7>[ 77.193646] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 77.193767] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:216:DDI TC1/PHY TC1] <7>[ 77.194133] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:228:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT) <7>[ 77.194298] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 77.194433] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:228:DDI TC2/PHY TC2] <7>[ 77.194660] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:236:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT) <7>[ 77.194786] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected) <7>[ 77.194903] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:236:DDI TC3/PHY TC3] <7>[ 77.195418] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] hw state readout: enabled <7>[ 77.195537] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:146:pipe B] hw state readout: disabled <7>[ 77.195651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:204:pipe C] hw state readout: disabled <7>[ 77.195742] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] hw state readout: enabled, pipe A <7>[ 77.195831] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] hw state readout: disabled, pipe A <7>[ 77.195923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] hw state readout: disabled, pipe A <7>[ 77.196014] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] hw state readout: disabled, pipe A <7>[ 77.196110] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] hw state readout: disabled, pipe A <7>[ 77.196224] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] hw state readout: disabled, pipe A <7>[ 77.196334] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:91:plane 1B] hw state readout: disabled, pipe B <7>[ 77.196433] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:101:plane 2B] hw state readout: disabled, pipe B <7>[ 77.196516] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 3B] hw state readout: disabled, pipe B <7>[ 77.196601] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:121:plane 4B] hw state readout: disabled, pipe B <7>[ 77.196689] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:131:plane 5B] hw state readout: disabled, pipe B <7>[ 77.196778] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:141:cursor B] hw state readout: disabled, pipe B <7>[ 77.196865] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:149:plane 1C] hw state readout: disabled, pipe C <7>[ 77.196949] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:159:plane 2C] hw state readout: disabled, pipe C <7>[ 77.197036] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:169:plane 3C] hw state readout: disabled, pipe C <7>[ 77.197129] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:179:plane 4C] hw state readout: disabled, pipe C <7>[ 77.197218] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:189:plane 5C] hw state readout: disabled, pipe C <7>[ 77.197308] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:199:cursor C] hw state readout: disabled, pipe C <7>[ 77.198088] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp <7>[ 77.198226] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:207:DDI A/PHY A] hw state readout: enabled, pipe A <7>[ 77.198337] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 77.198434] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:216:DDI TC1/PHY TC1] hw state readout: disabled, pipe A <7>[ 77.198511] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:218:DP-MST A] hw state readout: disabled, pipe A <7>[ 77.198587] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST B] hw state readout: disabled, pipe B <7>[ 77.198663] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST C] hw state readout: disabled, pipe C <7>[ 77.198740] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 77.198820] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:228:DDI TC2/PHY TC2] hw state readout: disabled, pipe A <7>[ 77.198895] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:230:DP-MST A] hw state readout: disabled, pipe A <7>[ 77.198971] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:231:DP-MST B] hw state readout: disabled, pipe B <7>[ 77.199049] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:232:DP-MST C] hw state readout: disabled, pipe C <7>[ 77.199148] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected) pin assignment: - max lanes: 4 <7>[ 77.199239] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:236:DDI TC3/PHY TC3] hw state readout: disabled, pipe A <7>[ 77.199324] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:238:DP-MST A] hw state readout: disabled, pipe A <7>[ 77.199407] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:239:DP-MST B] hw state readout: disabled, pipe B <7>[ 77.199482] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:240:DP-MST C] hw state readout: disabled, pipe C <7>[ 77.199580] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:208:eDP-1] hw state readout: enabled <7>[ 77.199672] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:217:DP-1] hw state readout: disabled <7>[ 77.199760] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:229:DP-2] hw state readout: disabled <7>[ 77.199848] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:237:DP-3] hw state readout: disabled <7>[ 77.200004] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:33:plane 1A] min_cdclk 173855 kHz <7>[ 77.200102] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:43:plane 2A] min_cdclk 0 kHz <7>[ 77.200192] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:53:plane 3A] min_cdclk 0 kHz <7>[ 77.200276] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:63:plane 4A] min_cdclk 0 kHz <7>[ 77.200359] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:73:plane 5A] min_cdclk 0 kHz <7>[ 77.200436] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:83:cursor A] min_cdclk 0 kHz <7>[ 77.200512] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:88:pipe A] min_cdclk 173855 kHz <7>[ 77.200586] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:91:plane 1B] min_cdclk 0 kHz <7>[ 77.200660] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:101:plane 2B] min_cdclk 0 kHz <7>[ 77.200733] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 3B] min_cdclk 0 kHz <7>[ 77.200806] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:121:plane 4B] min_cdclk 0 kHz <7>[ 77.200877] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:131:plane 5B] min_cdclk 0 kHz <7>[ 77.200948] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:141:cursor B] min_cdclk 0 kHz <7>[ 77.201019] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:146:pipe B] min_cdclk 0 kHz <7>[ 77.201096] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:149:plane 1C] min_cdclk 0 kHz <7>[ 77.201174] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:159:plane 2C] min_cdclk 0 kHz <7>[ 77.201251] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:169:plane 3C] min_cdclk 0 kHz <7>[ 77.201328] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:179:plane 4C] min_cdclk 0 kHz <7>[ 77.201405] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:189:plane 5C] min_cdclk 0 kHz <7>[ 77.201480] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:199:cursor C] min_cdclk 0 kHz <7>[ 77.201555] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:204:pipe C] min_cdclk 0 kHz <7>[ 77.201776] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:88:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no <7>[ 77.201859] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:146:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 77.201940] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:204:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no <7>[ 77.202019] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1 <7>[ 77.202139] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0 <7>[ 77.202268] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0 <7>[ 77.202419] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no <7>[ 77.202521] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A <7>[ 77.202749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [setup_hw_state] <7>[ 77.202862] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 77.202966] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0 <7>[ 77.203061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 77.203175] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 77.203275] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 77.203373] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 77.203463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64 <7>[ 77.203553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 77.203641] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 77.203729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 77.203815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled <7>[ 77.203902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 77.203987] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0 <7>[ 77.204076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 77.204170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 1 <7>[ 77.204264] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: yes, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96 <7>[ 77.204357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 77.204442] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 77.204527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 77.204610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 77.204695] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 77.204781] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 77.204870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 77.204958] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 77.205041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 77.205136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 77.205226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 77.205313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x41eb0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000 <7>[ 77.205396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0 <7>[ 77.205475] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 77.205551] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 77.205630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 77.205709] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 77.205787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 77.205864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 77.205941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 77.206017] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 77.206104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 77.206205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 77.206306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 77.206403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 77.206484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:146:pipe B] enable: no [setup_hw_state] <7>[ 77.206564] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:204:pipe C] enable: no [setup_hw_state] <7>[ 77.206812] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:88:pipe A][PLANE:33:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800 <7>[ 77.206902] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:33:plane 1A] on [CRTC:88:pipe A] <6>[ 77.214860] xe 0000:00:02.0: [drm] Tile0: GT0: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 77.218339] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 77.218443] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000000 <7>[ 77.218521] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000000 <7>[ 77.218592] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 77.218660] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 77.218727] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 77.218792] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 77.218855] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 77.218917] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 77.218977] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 77.219037] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 77.219121] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 77.219186] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 77.219250] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 77.219314] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 77.219425] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K) <7>[ 77.230087] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 77.230942] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 77.231175] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (geometry): 00000000,00000000,000000df <7>[ 77.231270] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: dss mask (compute): 00000000,00000000,000000df <7>[ 77.231362] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU mask per DSS: 000000ff <7>[ 77.231449] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: EU type: simd16 <7>[ 77.231529] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT0: L3 bank mask: 00000000,000000ff <6>[ 77.872071] xe 0000:00:02.0: [drm] Tile0: GT0: ccs1 fused off <6>[ 77.872074] xe 0000:00:02.0: [drm] Tile0: GT0: ccs2 fused off <6>[ 77.872075] xe 0000:00:02.0: [drm] Tile0: GT0: ccs3 fused off <7>[ 77.872207] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add rcs0 whitelist to engine <7>[ 77.872322] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 77.872444] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 77.872539] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 77.872727] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs0 whitelist to engine <7>[ 77.872946] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add bcs8 whitelist to engine <7>[ 77.873104] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: Add ccs0 whitelist to engine <7>[ 77.873196] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdafc-0xdaff]: allow read access <7>[ 77.873279] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb00-0xdb1f]: allow read access <7>[ 77.873371] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT0: REG[0xdb1c-0xdb1f]: allow rw access <7>[ 77.874415] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying GT save-restore MMIOs <7>[ 77.874549] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x4148] = 0x00000000 <7>[ 77.874682] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x8828] = 0x00800000 <7>[ 77.874791] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb104] = 0x08104440 <7>[ 77.874882] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb108] = 0x30200000 <7>[ 77.874971] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb154] = 0x00020000 <7>[ 77.875057] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xb158] = 0x0000007f <7>[ 77.875141] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: flag:0x1 <7>[ 77.875221] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: mocs entries: 16 <7>[ 77.875300] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[0] 0x4000 0xc <7>[ 77.875385] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[1] 0x4004 0x10c <7>[ 77.875477] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[2] 0x4008 0x130 <7>[ 77.875577] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[3] 0x400c 0x13c <7>[ 77.875677] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[4] 0x4010 0x100 <7>[ 77.875775] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[5] 0x4014 0x100 <7>[ 77.875852] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[6] 0x4018 0x100 <7>[ 77.875928] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[7] 0x401c 0x100 <7>[ 77.876004] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[8] 0x4020 0x100 <7>[ 77.876083] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[9] 0x4024 0x100 <7>[ 77.876161] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[10] 0x4028 0x100 <7>[ 77.876238] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[11] 0x402c 0x100 <7>[ 77.876313] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[12] 0x4030 0x100 <7>[ 77.876397] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[13] 0x4034 0x100 <7>[ 77.876476] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[14] 0x4038 0x100 <7>[ 77.876555] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT0: GLOB_MOCS[15] 0x403c 0x100 <7>[ 77.876633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying rcs0 save-restore MMIOs <7>[ 77.876721] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x2050] = 0x10001000 <7>[ 77.876809] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20c4] = 0x3f7e0306 <7>[ 77.876885] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x20d4] = 0xc080c080 <7>[ 77.876964] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d0] = 0x1000dafc <7>[ 77.877038] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d4] = 0x1000db01 <7>[ 77.877113] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x24d8] = 0x0000db1c <7>[ 77.877188] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe194] = 0x00400040 <7>[ 77.877265] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe48c] = 0x02000200 <7>[ 77.877340] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe49c] = 0x40004000 <7>[ 77.877432] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4c4] = 0x08400840 <7>[ 77.877511] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe4f0] = 0x00020002 <7>[ 77.877600] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe530] = 0x00000400 <7>[ 77.877686] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7c8] = 0x00002000 <7>[ 77.877768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0xe7cc] = 0x00009000 <7>[ 77.878114] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs0 save-restore MMIOs <7>[ 77.878184] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x22050] = 0x10001000 <7>[ 77.878253] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220c4] = 0x3f7e0306 <7>[ 77.878319] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x220d4] = 0xc080c080 <7>[ 77.878662] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying bcs8 save-restore MMIOs <7>[ 77.878731] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee050] = 0x10001000 <7>[ 77.878798] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0c4] = 0x3f7e0306 <7>[ 77.878862] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x3ee0d4] = 0xc080c080 <7>[ 77.879157] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: Applying ccs0 save-restore MMIOs <7>[ 77.879224] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a050] = 0x10001000 <7>[ 77.879291] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0c4] = 0x3f7e0306 <7>[ 77.879363] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a0d4] = 0xc080c080 <7>[ 77.879431] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d0] = 0x1000dafc <7>[ 77.879495] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d4] = 0x1000db01 <7>[ 77.879558] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT0: REG[0x1a4d8] = 0x0000db1c <7>[ 77.880015] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel disabled <7>[ 77.880139] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 0] = 0x003543f7 <7>[ 77.880210] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 1] = 0x00000800 <7>[ 77.880281] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 2] = 0x00000014 <7>[ 77.880359] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 3] = 0x00000001 <7>[ 77.880427] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 4] = 0x000008d2 <7>[ 77.880499] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 5] = 0x64a00004 <7>[ 77.880571] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 6] = 0x00000000 <7>[ 77.880642] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 7] = 0x00000000 <7>[ 77.880711] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 8] = 0x00000000 <7>[ 77.880773] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[ 9] = 0x00000000 <7>[ 77.880832] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[10] = 0x00000000 <7>[ 77.880890] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[11] = 0x00000000 <7>[ 77.880947] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[12] = 0x00000000 <7>[ 77.881003] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT0: GuC param[13] = 0x00000000 <7>[ 77.881083] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT0: using 65535 GuC IDs <7>[ 77.881315] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT0: using 256 doorbells <7>[ 77.882669] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT0: reusable buffer with 2048 dwords at 0xd19000 for xe_guc_init_post_hwconfig [xe] <7>[ 77.885120] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] Tile0: GT0: capture found 42 ext-regs. <7>[ 77.903106] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT0: Updated ADS capture size 20480 (was 45056) <7>[ 77.913817] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT0: GuC load: init took 10ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034 <7>[ 77.914210] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT0: GuC CT communication channel enabled <7>[ 77.915344] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC rcs0 WA job: 4138 dwords <7>[ 77.915534] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x5588] = 0x04000400 <7>[ 77.915685] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6204] = 0x00400040 <7>[ 77.915818] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6208] = 0x00200020 <7>[ 77.915940] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x62a8] = 0x02400240 <7>[ 77.916057] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7010] = 0x40004000 <7>[ 77.916170] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x7044] = 0x04200420 <7>[ 77.916283] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x83a8] = 0x20002000 <7>[ 77.916428] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x6210] = ~0x18000|0x18000 <7>[ 77.920297] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC bcs0 WA job: 27 dwords <7>[ 77.920522] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: REG[0x22204] = ~0x7e7e|0x606 <7>[ 77.920689] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <7>[ 77.924085] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT0: LRC ccs0 WA job: 0 dwords <7>[ 77.924317] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT0: No non-register state to emit on graphics ver 20.04 <6>[ 77.930343] xe 0000:00:02.0: [drm] Tile0: GT1: Using GuC firmware from xe/lnl_guc_70.bin version 70.53.0 <7>[ 77.935981] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 77.936172] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 77.936355] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000000 <7>[ 77.936510] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 77.936659] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 77.936802] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 77.936938] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 77.937071] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 77.937203] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 77.937346] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 77.937470] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 77.937588] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 77.937706] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 77.937824] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <6>[ 77.939174] xe 0000:00:02.0: [drm] Tile0: GT1: Using HuC firmware from xe/lnl_huc.bin version 9.4.13 <6>[ 77.941434] xe 0000:00:02.0: [drm] Tile0: GT1: Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.5.1429 <6>[ 77.942573] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe]) <7>[ 77.942701] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K <7>[ 77.942855] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K) <7>[ 77.964308] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 77.964926] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 77.965290] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (geometry): 00000000,00000000,00000000 <7>[ 77.965553] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: dss mask (compute): 00000000,00000000,00000000 <7>[ 77.965804] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU mask per DSS: 00000000 <7>[ 77.966031] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: EU type: simd16 <7>[ 77.966249] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] Tile0: GT1: L3 bank mask: 00000000,0000000f <6>[ 77.966526] xe 0000:00:02.0: [drm] Tile0: GT1: vcs1 fused off <6>[ 77.966531] xe 0000:00:02.0: [drm] Tile0: GT1: vcs2 fused off <6>[ 77.966535] xe 0000:00:02.0: [drm] Tile0: GT1: vcs3 fused off <6>[ 77.966539] xe 0000:00:02.0: [drm] Tile0: GT1: vcs4 fused off <6>[ 77.966542] xe 0000:00:02.0: [drm] Tile0: GT1: vcs5 fused off <6>[ 77.966545] xe 0000:00:02.0: [drm] Tile0: GT1: vcs6 fused off <6>[ 77.966548] xe 0000:00:02.0: [drm] Tile0: GT1: vcs7 fused off <6>[ 77.966552] xe 0000:00:02.0: [drm] Tile0: GT1: vecs1 fused off <6>[ 77.966555] xe 0000:00:02.0: [drm] Tile0: GT1: vecs2 fused off <6>[ 77.966559] xe 0000:00:02.0: [drm] Tile0: GT1: vecs3 fused off <7>[ 77.966683] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vcs0 whitelist to engine <7>[ 77.967064] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add vecs0 whitelist to engine <7>[ 77.967492] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] Tile0: GT1: Add gsccs0 whitelist to engine <7>[ 77.969465] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying GT save-restore MMIOs <7>[ 77.969706] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x4148] = 0x00000000 <7>[ 77.969937] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x82a8] = 0x00800000 <7>[ 77.970163] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb604] = 0x08104440 <7>[ 77.970420] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb608] = 0x30200000 <7>[ 77.970635] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb654] = 0x00020000 <7>[ 77.970838] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0xb658] = 0x0000007f <7>[ 77.971039] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f08] = 0x00000020 <7>[ 77.971226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f10] = 0x00400000 <7>[ 77.971452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c3f1c] = 0x00000008 <7>[ 77.971625] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: flag:0x1 <7>[ 77.971792] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: mocs entries: 16 <7>[ 77.971984] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[0] 0x4000 0xc <7>[ 77.972147] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[1] 0x4004 0x10c <7>[ 77.972316] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[2] 0x4008 0x130 <7>[ 77.972463] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[3] 0x400c 0x13c <7>[ 77.972603] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[4] 0x4010 0x100 <7>[ 77.972742] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[5] 0x4014 0x100 <7>[ 77.972892] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[6] 0x4018 0x100 <7>[ 77.973044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[7] 0x401c 0x100 <7>[ 77.973194] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[8] 0x4020 0x100 <7>[ 77.973353] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[9] 0x4024 0x100 <7>[ 77.973477] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[10] 0x4028 0x100 <7>[ 77.973599] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[11] 0x402c 0x100 <7>[ 77.973723] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[12] 0x4030 0x100 <7>[ 77.973842] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[13] 0x4034 0x100 <7>[ 77.973959] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[14] 0x4038 0x100 <7>[ 77.974069] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] Tile0: GT1: GLOB_MOCS[15] 0x403c 0x100 <7>[ 77.974175] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vcs0 save-restore MMIOs <7>[ 77.974312] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c0050] = 0x10001000 <7>[ 77.974433] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c00d4] = 0xc000c000 <7>[ 77.974916] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying vecs0 save-restore MMIOs <7>[ 77.975025] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c8050] = 0x10001000 <7>[ 77.975133] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x1c80d4] = 0xc000c000 <7>[ 77.975590] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: Applying gsccs0 save-restore MMIOs <7>[ 77.975715] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a050] = 0x10001000 <7>[ 77.975830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] Tile0: GT1: REG[0x11a0d4] = 0xc000c000 <7>[ 77.976455] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel disabled <7>[ 77.976598] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 0] = 0x00df63f7 <7>[ 77.976706] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 1] = 0x00000000 <7>[ 77.976814] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 2] = 0x00000014 <7>[ 77.976917] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 3] = 0x00000001 <7>[ 77.977005] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 4] = 0x00001e16 <7>[ 77.977091] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 5] = 0x64a00004 <7>[ 77.977175] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 6] = 0x00000000 <7>[ 77.977265] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 7] = 0x00000000 <7>[ 77.977346] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 8] = 0x00000000 <7>[ 77.977425] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[ 9] = 0x00000000 <7>[ 77.977506] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[10] = 0x00000000 <7>[ 77.977585] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[11] = 0x00000000 <7>[ 77.977658] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[12] = 0x00000000 <7>[ 77.977728] xe 0000:00:02.0: [drm:guc_print_params [xe]] Tile0: GT1: GuC param[13] = 0x00000000 <7>[ 77.977819] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] Tile0: GT1: using 65535 GuC IDs <7>[ 77.977927] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] Tile0: GT1: using 256 doorbells <7>[ 77.979254] xe 0000:00:02.0: [drm:xe_guc_buf_cache_init [xe]] Tile0: GT1: reusable buffer with 2048 dwords at 0x1984000 for xe_guc_init_post_hwconfig [xe] <7>[ 78.010615] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] Tile0: GT1: Updated ADS capture size 24576 (was 45056) <7>[ 78.031281] xe 0000:00:02.0: [drm:guc_wait_ucode [xe]] Tile0: GT1: GuC load: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034 <7>[ 78.031867] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] Tile0: GT1: GuC CT communication channel enabled <7>[ 78.033414] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vcs0 WA job: 0 dwords <7>[ 78.033708] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 78.037648] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC vecs0 WA job: 0 dwords <7>[ 78.038071] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 78.041295] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] Tile0: GT1: LRC gsccs0 WA job: 0 dwords <7>[ 78.041664] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] Tile0: GT1: No non-register state to emit on graphics ver 20.04 <7>[ 78.086173] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GuC <7>[ 78.087441] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 78.087907] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 78.088422] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 78.088920] xe 0000:00:02.0: [drm:xe_pagefault_init [xe]] xe_pagefault_entry_size=64, total_num_eus=56, pf_queue->size=65536 <7>[ 78.089910] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT0: oa_unit 0, type 0, Engines: rcs0 ccs0 <7>[ 78.090371] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 1, type 2, Engines: <7>[ 78.090770] xe 0000:00:02.0: [drm:xe_oa_print_gt_oa_units [xe]] Tile0: GT1: oa_unit 2, type 1, Engines: vcs0 vecs0 <7>[ 78.092859] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 0: start 0x90008 <7>[ 78.093447] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 1: start 0x90108 <7>[ 78.093979] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 2: start 0x90208 <7>[ 78.094495] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 3: start 0x90308 <7>[ 78.094943] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:88:pipe A] FQ 4: start 0x903c8 <7>[ 78.095441] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:146:pipe B] FQ 0: start 0x98008 <7>[ 78.095917] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:146:pipe B] FQ 1: start 0x98108 <7>[ 78.096397] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:146:pipe B] FQ 2: start 0x98208 <7>[ 78.096811] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:146:pipe B] FQ 3: start 0x98308 <7>[ 78.097246] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:146:pipe B] FQ 4: start 0x983c8 <7>[ 78.097702] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:204:pipe C] FQ 0: start 0x52008 <7>[ 78.098173] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:204:pipe C] FQ 1: start 0x52108 <7>[ 78.098620] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:204:pipe C] FQ 2: start 0x52208 <7>[ 78.099048] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:204:pipe C] FQ 3: start 0x52308 <7>[ 78.099476] xe 0000:00:02.0: [drm:intel_flipq_init [xe]] [CRTC:204:pipe C] FQ 4: start 0x523c8 <7>[ 78.100339] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes <7>[ 78.100729] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:88:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1 <7>[ 78.101096] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:83:cursor A] ddb ( 0 - 0) -> (4051 - 4096), size 0 -> 45 <7>[ 78.101550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:146:pipe B] enable: no [fastset] <7>[ 78.101932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:204:pipe C] enable: no [fastset] <7>[ 78.103717] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A) <7>[ 78.103979] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes) <7>[ 78.111378] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:146:pipe B] <7>[ 78.111980] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:204:pipe C] <7>[ 78.127874] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:208:eDP-1] adding connector to sysfs <7>[ 78.132475] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:208:eDP-1] backlight device intel_backlight registered <7>[ 78.132753] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:208:eDP-1] Registered panel device 'card0-eDP-1', has fwnode: yes <7>[ 78.132973] xe 0000:00:02.0: [drm:intel_panel_register [xe]] [CONNECTOR:208:eDP-1] Panel prepare <7>[ 78.133601] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1 <7>[ 78.135073] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:208:eDP-1] generating connector hotplug event <7>[ 78.135161] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:217:DP-1] adding connector to sysfs <7>[ 78.135613] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1 <7>[ 78.136379] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:217:DP-1] generating connector hotplug event <7>[ 78.136419] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:229:DP-2] adding connector to sysfs <7>[ 78.136807] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2 <7>[ 78.137680] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:229:DP-2] generating connector hotplug event <7>[ 78.137721] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:237:DP-3] adding connector to sysfs <7>[ 78.138111] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3 <7>[ 78.138718] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:237:DP-3] generating connector hotplug event <6>[ 78.138751] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0 <7>[ 78.138783] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected <6>[ 78.148936] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no) <6>[ 78.152469] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 <7>[ 78.154246] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010) <7>[ 78.154410] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480 <7>[ 78.154721] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix <6>[ 78.154726] snd_hda_intel 0000:00:1f.3: codec_mask forced to 0x4 <6>[ 78.156243] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe]) <7>[ 78.156306] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:217:DP-1] <7>[ 78.156647] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 78.156636] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010 <7>[ 78.156823] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:217:DP-1] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 78.156970] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:229:DP-2] <7>[ 78.157185] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 78.157326] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:229:DP-2] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 78.157458] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:237:DP-3] <7>[ 78.157617] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 78.157754] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:237:DP-3] status updated from unknown to disconnected (epoch counter 0->1) <7>[ 78.157779] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:33:plane 1A] no fb, skipping <7>[ 78.157883] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 78.157906] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:146:pipe B] not active, skipping <7>[ 78.158026] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:204:pipe C] not active, skipping <7>[ 78.158155] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config <7>[ 78.158482] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 78.158754] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1] <7>[ 78.158762] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:208:eDP-1] <7>[ 78.159238] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 78.159558] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 78.159691] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 78.159824] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 78.160049] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 78.160055] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 78.160058] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 78.160059] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 78.160062] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 78.160072] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 78.160074] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD monitor <5>[ 78.160080] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 78.160081] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD size 20, SAD count 0 <5>[ 78.160085] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 78.160109] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:208:eDP-1] VRR capable: yes <7>[ 78.160243] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:208:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 78.160367] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:208:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <7>[ 78.160881] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1] status updated from unknown to connected <5>[ 78.161076] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 78.161079] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 78.161080] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 78.161135] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1] probed modes: <7>[ 78.161139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 78.161142] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 78.161146] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:DP-1] <7>[ 78.161149] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:217:DP-1] <7>[ 78.161310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:DP-1] disconnected <7>[ 78.161312] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:229:DP-2] <7>[ 78.161314] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:229:DP-2] <7>[ 78.161437] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:229:DP-2] disconnected <7>[ 78.161439] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:237:DP-3] <7>[ 78.161441] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:237:DP-3] <7>[ 78.161563] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:237:DP-3] disconnected <7>[ 78.161566] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:208:eDP-1] enabled? yes <7>[ 78.161568] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:217:DP-1] enabled? no <7>[ 78.161570] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:229:DP-2] enabled? no <7>[ 78.161572] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:237:DP-3] enabled? no <7>[ 78.161631] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 78.161647] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:208:eDP-1] found preferred mode: 2880x1800 <7>[ 78.161649] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config <7>[ 78.161660] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 78.161721] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane <7>[ 78.161728] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one <7>[ 78.162377] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01 <7>[ 78.163088] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL <7>[ 78.163097] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled <7>[ 78.164759] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event <7>[ 78.169007] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01da5000 <6>[ 78.170219] fbcon: xedrmfb (fb0) is primary device <7>[ 78.171231] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:208:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36) <7>[ 78.171435] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:207:DDI A/PHY A][CRTC:88:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000 <7>[ 78.171637] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000 <7>[ 78.171848] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0 <7>[ 78.172082] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:207:DDI A/PHY A] [CRTC:88:pipe A] <7>[ 78.172289] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288) <7>[ 78.172494] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10 <7>[ 78.172691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected: <7>[ 78.172885] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, <7>[ 78.173095] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1, <7>[ 78.173293] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1. <7>[ 78.173484] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 78.173671] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 78.173859] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0 <7>[ 78.174046] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 78.174254] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 78.174437] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 78.174618] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23 <7>[ 78.174799] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found: <7>[ 78.174989] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, <7>[ 78.175189] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1. <7>[ 78.175380] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state: <7>[ 78.175558] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21 <7>[ 78.175734] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1 <7>[ 78.175908] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0 <7>[ 78.176095] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0 <7>[ 78.176271] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1 <7>[ 78.176450] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23 <7>[ 78.176626] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30) <7>[ 78.176831] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000) <7>[ 78.177020] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:88:pipe A] fastset requirement not met in set_context_latency (expected 1, found 0) <7>[ 78.177227] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:88:pipe A] fastset requirement not met, forcing full modeset <7>[ 78.177460] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:33:plane 1A] ddb ( 0 - 0) -> ( 0 - 4051), size 0 -> 4051 <7>[ 78.177670] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm <7>[ 78.177842] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 13, 13, 13, 13, 13, 0, 0, 0, 3, 0 <7>[ 78.178012] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 313, 313, 313, 313, 313, 0, 0, 38, 73, 87 <7>[ 78.178194] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:33:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 346, 346, 346, 346, 346, 0, 0, 39, 82, 88 <7>[ 78.178360] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 78.178522] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.178686] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.178846] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:43:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.179004] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 78.179216] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.179388] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.179556] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:53:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.179719] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 78.179878] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.180033] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.180267] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:63:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.180432] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 78.180585] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.180729] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.180876] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:73:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.181024] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm <7>[ 78.181184] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.181335] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.181500] xe 0000:00:02.0: [drm:skl_print_plane_changes [xe]] [PLANE:83:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 <7>[ 78.181678] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:88:pipe A] data rate 1390840 num active planes 1 <7>[ 78.181902] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400 <7>[ 78.182102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400 <7>[ 78.182291] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 78.182477] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400 <7>[ 78.182658] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461 <7>[ 78.182935] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:88:pipe A] enable: yes [modeset] <7>[ 78.183170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB <7>[ 78.183350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0 <7>[ 78.183526] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <7>[ 78.183697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: , slave transcoder bitmask = 0x0 <7>[ 78.183866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0 <7>[ 78.184034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0 <7>[ 78.184224] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64 <7>[ 78.184391] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0 <7>[ 78.184553] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled <7>[ 78.184716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled <7>[ 78.184877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled <7>[ 78.185038] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0 <7>[ 78.185228] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4 <7>[ 78.185403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14 <7>[ 78.185566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB <7>[ 78.185718] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB <7>[ 78.185869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0 <7>[ 78.186034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range <7>[ 78.186214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined <7>[ 78.186371] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1 <7>[ 78.186530] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] framestart delay: 1, MSA timing delay: 0, set context latency: 0 <7>[ 78.186685] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, fixed rr: yes, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 104 vsync start: 103, vsync end: 97 <7>[ 78.186852] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1802, vmax vblank: 1802, vmin vtotal: 1906, vmax vtotal: 1906 <7>[ 78.187004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 78.187170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 78.187317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 78.187478] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 78.187630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa <7>[ 78.187787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710, min cdclk 173855 <7>[ 78.187922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0 <7>[ 78.188067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0 <7>[ 78.188206] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no <7>[ 78.188344] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0 <7>[ 78.188479] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000 <7>[ 78.188610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0 <7>[ 78.188740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries <7>[ 78.188870] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 78.189001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 78.189155] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 78.189291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 78.189434] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 78.189574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000 <7>[ 78.189713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 78.189858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 78.190010] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000 <7>[ 78.190162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000 <7>[ 78.190299] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sharpness strength: 0, sharpness tap size: 0, sharpness enable: 0 <7>[ 78.190433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:33:plane 1A] fb: [FB:209] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes <7>[ 78.190573] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0 <7>[ 78.190707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0 <7>[ 78.190830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:43:plane 2A] fb: [NOFB], visible: no <7>[ 78.190952] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:53:plane 3A] fb: [NOFB], visible: no <7>[ 78.191105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:63:plane 4A] fb: [NOFB], visible: no <7>[ 78.191227] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:73:plane 5A] fb: [NOFB], visible: no <7>[ 78.191362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:83:cursor A] fb: [NOFB], visible: no <6>[ 78.191852] xe 0000:00:02.0: [drm] Tile0: GT1: found GSC cv104.1.0 <7>[ 78.193215] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC FW async load completed <7>[ 78.196429] xe 0000:00:02.0: [drm:intel_alpm_disable [xe]] Disabling ALPM <7>[ 78.196576] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] <7>[ 78.206657] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 78.206787] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 78.206900] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 78.207033] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A <7>[ 78.207162] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 78.207287] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 78.207409] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 78.207530] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B <7>[ 78.207648] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 78.207763] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 78.207878] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 78.207993] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C <7>[ 78.208154] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 78.208266] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 78.208375] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 78.208482] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D <7>[ 78.208589] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 78.208696] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 78.208797] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 78.208886] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E <7>[ 78.208973] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 78.209078] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 78.209182] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 78.209285] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F <7>[ 78.209387] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 78.209479] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 78.209566] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 78.209664] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G <7>[ 78.209775] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 78.209884] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 78.209984] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 78.210087] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H <7>[ 78.210191] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 78.210294] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 78.210385] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <7>[ 78.210469] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I <6>[ 78.214899] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6 <7>[ 78.216412] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] Tile0: GT1: HuC: authenticated via GSC <6>[ 78.219683] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7 <6>[ 78.220905] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8 <6>[ 78.221733] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9 <7>[ 78.399128] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:208:eDP-1] set backlight PWM = 0 <7>[ 78.401010] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A <7>[ 78.411481] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 turn panel power off <7>[ 78.411811] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 78.412085] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power off time <7>[ 78.412309] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:207:DDI A/PHY A] - short <7>[ 78.412656] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060 <7>[ 78.464576] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000 <7>[ 78.464939] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:207:DDI A/PHY A] - short <7>[ 78.472818] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 78.473414] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A <7>[ 78.474628] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x1341b072) <7>[ 78.474598] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:207:DDI A/PHY A] <7>[ 78.475165] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:207:DDI A/PHY A] <7>[ 78.475297] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:207:DDI A/PHY A] <7>[ 78.475692] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:216:DDI TC1/PHY TC1] <7>[ 78.476223] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:218:DP-MST A] <7>[ 78.476704] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST B] <7>[ 78.477162] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST C] <7>[ 78.477641] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:228:DDI TC2/PHY TC2] <7>[ 78.478130] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:230:DP-MST A] <7>[ 78.478567] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:231:DP-MST B] <7>[ 78.479017] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:232:DP-MST C] <7>[ 78.479502] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:236:DDI TC3/PHY TC3] <7>[ 78.479991] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:238:DP-MST A] <7>[ 78.480393] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:239:DP-MST B] <7>[ 78.480835] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:240:DP-MST C] <7>[ 78.481303] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A <7>[ 78.482838] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 turn panel power on <7>[ 78.483322] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power cycle (490 ms remaining) <7>[ 78.498775] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 78.499164] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:207:DDI A/PHY A] - long <7>[ 78.499519] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10 <7>[ 78.499873] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:207:DDI A/PHY A] <7>[ 78.625768] xe 0000:00:02.0: [drm:gsc_work [xe]] Tile0: GT1: GSC proxy init completed <7>[ 78.981380] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060 <7>[ 79.051711] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 79.051854] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 wait for panel power on <7>[ 79.051981] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063 <7>[ 79.088005] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010 <7>[ 79.088152] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:207:DDI A/PHY A] - long <7>[ 79.088264] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20 <7>[ 79.088378] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:207:DDI A/PHY A] <7>[ 79.213576] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 79.213576] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 79.213576] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 79.262107] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete <7>[ 79.263773] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 turning VDD on <7>[ 79.263922] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b <7>[ 79.265652] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80 <7>[ 79.266753] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Reloading eDP link rates <7>[ 79.267269] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05 <7>[ 79.268033] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0 <7>[ 79.268868] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using DP training pattern TPS1 <7>[ 79.269684] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Clock recovery OK <7>[ 79.269816] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Using DP training pattern TPS4 <7>[ 79.270899] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful <7>[ 79.271032] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:208:eDP-1][ENCODER:207:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4 <7>[ 79.271583] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A <7>[ 79.271771] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] <7>[ 79.271869] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A <7>[ 79.271980] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:208:eDP-1] set backlight PWM = 192000 <7>[ 79.288554] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2 <7>[ 79.289763] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:208:eDP-1] <7>[ 79.289900] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:88:pipe A] <7>[ 79.290823] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp <7>[ 79.291725] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072) <7>[ 79.292188] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000 <6>[ 79.292269] Console: switching to colour frame buffer device 180x56 <7>[ 79.292503] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:208:eDP-1] set backlight level = 13892 <6>[ 79.323210] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device <7>[ 79.461178] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20 <7>[ 79.461337] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0 <7>[ 79.461461] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no <7>[ 79.461777] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes <7>[ 79.461886] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes <7>[ 79.462042] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes <7>[ 79.462178] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes <7>[ 79.462295] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes <7>[ 79.462402] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes <7>[ 79.462504] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no <7>[ 79.462605] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes <7>[ 79.462705] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no <7>[ 79.462804] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes <7>[ 79.462914] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no <7>[ 79.463043] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes <7>[ 79.463174] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no <7>[ 79.463305] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no <7>[ 79.463434] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no <7>[ 79.463534] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes <7>[ 79.463630] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes <7>[ 79.463722] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes <7>[ 79.463816] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz <7>[ 79.464716] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device <7>[ 79.464818] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC <7>[ 79.464930] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D <7>[ 79.465085] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C <7>[ 79.465238] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B <7>[ 79.465360] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 79.465476] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 79.465739] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 79.468231] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no <7>[ 79.473601] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2 <7>[ 79.488738] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0 <7>[ 79.490700] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 79.491059] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 79.505519] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event] <7>[ 79.505529] xe 0000:00:02.0: [drm:drm_client_modeset_probe] <7>[ 79.505741] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1] <7>[ 79.505748] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:208:eDP-1] <7>[ 79.506254] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00 <7>[ 79.506619] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000 <7>[ 79.506728] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 79.506827] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000 <7>[ 79.507396] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz <5>[ 79.507406] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 79.507409] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.507411] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] DisplayID extension version 0x13, primary use 0x00 <7>[ 79.507414] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc. <5>[ 79.507418] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.507420] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD monitor <5>[ 79.507429] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.507431] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:208:eDP-1] ELD size 20, SAD count 0 <5>[ 79.507434] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.507468] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:208:eDP-1] VRR capable: yes <7>[ 79.507568] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:208:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps <7>[ 79.507661] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:208:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no <5>[ 79.508290] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 79.508296] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <5>[ 79.508298] [drm] DisplayID checksum invalid, remainder is 248 (ignoring) <7>[ 79.508415] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:208:eDP-1] probed modes: <7>[ 79.508427] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa <7>[ 79.508431] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] Probed mode: "2880x1800": 120 695310 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa <7>[ 79.508436] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:DP-1] <7>[ 79.508440] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:217:DP-1] <7>[ 79.508599] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 79.508736] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 79.509071] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 79.509294] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 79.509419] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:217:DP-1] disconnected <7>[ 79.509425] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:229:DP-2] <7>[ 79.509429] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:229:DP-2] <7>[ 79.509561] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 79.509664] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:229:DP-2] disconnected <7>[ 79.509668] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:237:DP-3] <7>[ 79.509671] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:237:DP-3] <7>[ 79.509796] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt) pin assignment: - max lanes: 4 <7>[ 79.509998] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:237:DP-3] disconnected <7>[ 79.510003] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:208:eDP-1] enabled? yes <7>[ 79.510006] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:217:DP-1] enabled? no <7>[ 79.510009] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:229:DP-2] enabled? no <7>[ 79.510011] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:237:DP-3] enabled? no <7>[ 79.510129] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration <7>[ 79.510160] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:208:eDP-1] found preferred mode: 2880x1800 <7>[ 79.510163] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config <7>[ 79.510218] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:88:pipe A] desired mode 2880x1800 set (0,0) <7>[ 79.522941] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off <7>[ 79.523093] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00 <7>[ 79.538529] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0 <7>[ 79.538738] [IGT] xe_module_load: finished subtest load, SUCCESS <7>[ 79.539183] [IGT] xe_module_load: exiting, ret=0 <7>[ 79.614187] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off <7>[ 79.614367] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6 <7>[ 79.614661] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02 <7>[ 80.556233] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 80.556305] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 80.556327] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected) pin assignment: - max lanes: 4 <7>[ 82.028433] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 turning VDD off <7>[ 82.028801] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:207:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067