<5>[ 0.000000] Linux version 6.14.0-rc7-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Mar 21 10:13:08 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fef5000 SMBIOS=0x6cbc7000 MEMATTR=0x68f39018 ESRT=0x68f71098 MOKvar=0x6cd0c000 TPMEventLog=0x6ff5a018
<6>[ 0.000000] efi: Remove mem256: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem258: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D86.2501240726 01/24/2025
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000364] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000365] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004644] esrt: Reserving ESRT space from 0x0000000068f71098 to 0x0000000068f711e8.
<7>[ 0.004652] e820: update [mem 0x68f71000-0x68f71fff] usable ==> reserved
<6>[ 0.004671] Using GB pages for direct mapping
<6>[ 0.005319] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005321] printk: early log buf free: 258888(98%)
<6>[ 0.005321] Secure boot disabled
<6>[ 0.005322] ACPI: Early table checksum verification disabled
<6>[ 0.005326] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005328] ACPI: XSDT 0x000000006FF71228 0001A4 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005332] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005335] ACPI: DSDT 0x000000006FFB6000 0254DE (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005337] ACPI: FACS 0x000000006FED9000 000040
<6>[ 0.005338] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005339] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005341] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005342] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005343] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005345] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005346] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005347] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005349] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005350] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005351] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005353] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005354] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005355] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005357] ACPI: SSDT 0x000000006FFDD000 009156 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005358] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005359] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005361] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005362] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005363] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005364] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005366] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005367] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005368] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005370] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005371] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005372] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005373] ACPI: SSDT 0x000000006FF85000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005375] ACPI: TPM2 0x000000006FF84000 00004C (v04 INTEL LNL 00000002 01000013)
<6>[ 0.005376] ACPI: LPIT 0x000000006FF83000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005377] ACPI: SSDT 0x000000006FF82000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005378] ACPI: SSDT 0x000000006FF81000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005380] ACPI: DBGP 0x000000006FF80000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005381] ACPI: DBG2 0x000000006FF7F000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005382] ACPI: NHLT 0x000000006FF7E000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005383] ACPI: SSDT 0x000000006FF7C000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005385] ACPI: SSDT 0x000000006FF75000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005386] ACPI: ECDT 0x000000006FF74000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005388] ACPI: DMAR 0x000000006FF73000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005389] ACPI: FPDT 0x000000006FF72000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005390] ACPI: SSDT 0x000000006FFA8000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005391] ACPI: SSDT 0x000000006FF6F000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005393] ACPI: SSDT 0x000000006FF6C000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005394] ACPI: SDEV 0x000000006FF6B000 000046 (v01 00000000 00000000)
<6>[ 0.005395] ACPI: SSDT 0x000000006FF60000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005397] ACPI: PHAT 0x000000006FF5F000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005398] ACPI: BGRT 0x000000006FF5E000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005399] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113]
<6>[ 0.005400] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb4dd]
<6>[ 0.005400] ACPI: Reserving FACS table memory at [mem 0x6fed9000-0x6fed903f]
<6>[ 0.005400] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005401] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005401] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005401] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005402] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005402] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005402] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005402] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005403] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005403] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005403] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005404] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005404] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f]
<6>[ 0.005404] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005404] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6155]
<6>[ 0.005405] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df]
<6>[ 0.005405] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2]
<6>[ 0.005405] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e]
<6>[ 0.005406] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955]
<6>[ 0.005406] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037]
<6>[ 0.005406] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005406] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7]
<6>[ 0.005407] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2]
<6>[ 0.005407] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815]
<6>[ 0.005408] ACPI: Reserving SSDT table memory at [mem 0x6ff85000-0x6ff8560d]
<6>[ 0.005409] ACPI: Reserving TPM2 table memory at [mem 0x6ff84000-0x6ff8404b]
<6>[ 0.005409] ACPI: Reserving LPIT table memory at [mem 0x6ff83000-0x6ff830cb]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff82d5b]
<6>[ 0.005409] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff811ef]
<6>[ 0.005410] ACPI: Reserving DBGP table memory at [mem 0x6ff80000-0x6ff80033]
<6>[ 0.005410] ACPI: Reserving DBG2 table memory at [mem 0x6ff7f000-0x6ff7f053]
<6>[ 0.005410] ACPI: Reserving NHLT table memory at [mem 0x6ff7e000-0x6ff7e2e2]
<6>[ 0.005410] ACPI: Reserving SSDT table memory at [mem 0x6ff7c000-0x6ff7d15b]
<6>[ 0.005411] ACPI: Reserving SSDT table memory at [mem 0x6ff75000-0x6ff7b53a]
<6>[ 0.005411] ACPI: Reserving ECDT table memory at [mem 0x6ff74000-0x6ff74068]
<6>[ 0.005411] ACPI: Reserving DMAR table memory at [mem 0x6ff73000-0x6ff730d7]
<6>[ 0.005412] ACPI: Reserving FPDT table memory at [mem 0x6ff72000-0x6ff72043]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6ffa8000-0x6ffa886c]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6ff6f000-0x6ff703da]
<6>[ 0.005412] ACPI: Reserving SSDT table memory at [mem 0x6ff6c000-0x6ff6e462]
<6>[ 0.005413] ACPI: Reserving SDEV table memory at [mem 0x6ff6b000-0x6ff6b045]
<6>[ 0.005413] ACPI: Reserving SSDT table memory at [mem 0x6ff60000-0x6ff6a4f9]
<6>[ 0.005413] ACPI: Reserving PHAT table memory at [mem 0x6ff5f000-0x6ff5f7bf]
<6>[ 0.005414] ACPI: Reserving BGRT table memory at [mem 0x6ff5e000-0x6ff5e037]
<6>[ 0.005481] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005690] No NUMA configuration found
<6>[ 0.005691] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005696] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005808] Zone ranges:
<6>[ 0.005809] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005810] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005811] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005811] Device empty
<6>[ 0.005812] Movable zone start for each node
<6>[ 0.005813] Early memory node ranges
<6>[ 0.005813] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005814] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005814] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005815] node 0: [mem 0x0000000104500000-0x000000087f7fffff]
<6>[ 0.005816] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005820] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005837] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007865] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036350] On node 0, zone Normal: 17664 pages in unavailable ranges
<6>[ 0.036415] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036898] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036904] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.036953] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.036955] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.036956] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.036958] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.036959] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.036970] e820: update [mem 0x68f52000-0x68f6cfff] usable ==> reserved
<6>[ 0.036976] TSC deadline timer available
<6>[ 0.036978] CPU topo: Max. logical packages: 1
<6>[ 0.036978] CPU topo: Max. logical dies: 1
<6>[ 0.036978] CPU topo: Max. dies per package: 1
<6>[ 0.036980] CPU topo: Max. threads per core: 1
<6>[ 0.036980] CPU topo: Num. cores per package: 8
<6>[ 0.036980] CPU topo: Num. threads per package: 8
<6>[ 0.036981] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.036993] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.036994] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.036995] PM: hibernation: Registered nosave memory: [mem 0x68f52000-0x68f6cfff]
<6>[ 0.036996] PM: hibernation: Registered nosave memory: [mem 0x68f71000-0x68f71fff]
<6>[ 0.036996] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.036997] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.036997] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.036998] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.036998] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.036998] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.036999] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.036999] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1044fffff]
<6>[ 0.037000] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037001] Booting paravirtualized kernel on bare hardware
<6>[ 0.037003] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037012] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037353] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037357] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037359] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037371] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[ 0.037448] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037462] random: crng init done
<6>[ 0.039300] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040219] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040274] Fallback order for Node 0: 0
<6>[ 0.040276] Built 1 zonelists, mobility grouping on. Total pages: 8289632
<6>[ 0.040277] Policy zone: Normal
<6>[ 0.040287] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[ 0.040288] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040290] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041223] software IO TLB: area num 8.
<4>[ 0.085900] **********************************************************
<4>[ 0.085901] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085902] ** **
<4>[ 0.085902] ** This system shows unhashed kernel memory addresses **
<4>[ 0.085902] ** via the console, logs, and other interfaces. This **
<4>[ 0.085902] ** might reduce the security of your system. **
<4>[ 0.085903] ** **
<4>[ 0.085903] ** If you see this message and you are not debugging **
<4>[ 0.085903] ** the kernel, report this immediately to your system **
<4>[ 0.085903] ** administrator! **
<4>[ 0.085903] ** **
<4>[ 0.085903] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.085903] **********************************************************
<6>[ 0.087007] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.087325] ftrace: allocating 59560 entries in 233 pages
<6>[ 0.112871] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114091] Dynamic Preempt: voluntary
<6>[ 0.114532] Running RCU self tests
<6>[ 0.114533] Running RCU synchronous self tests
<6>[ 0.114533] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.114534] rcu: RCU lockdep checking is enabled.
<6>[ 0.114534] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.114535] Trampoline variant of Tasks RCU enabled.
<6>[ 0.114535] Rude variant of Tasks RCU enabled.
<6>[ 0.114535] Tracing variant of Tasks RCU enabled.
<6>[ 0.114536] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.114536] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.114574] Running RCU synchronous self tests
<6>[ 0.114579] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.114582] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.114585] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.124531] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.124982] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.125309] Console: colour dummy device 80x25
<6>[ 0.125318] printk: legacy console [tty0] enabled
<6>[ 0.126520] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.126528] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.126531] ... MAX_LOCK_DEPTH: 48
<6>[ 0.126535] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.126539] ... CLASSHASH_SIZE: 4096
<6>[ 0.126542] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.126546] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.126550] ... CHAINHASH_SIZE: 262144
<6>[ 0.126554] memory used by lock dependency info: 54145 kB
<6>[ 0.126558] memory used for stack traces: 4224 kB
<6>[ 0.126562] per task-struct memory footprint: 1920 bytes
<6>[ 0.126613] ACPI: Core revision 20240827
<6>[ 0.127518] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.127581] APIC: Switch to symmetric I/O mode setup
<6>[ 0.127588] DMAR: Host address width 38
<6>[ 0.127592] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.127630] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.127666] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.127692] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.127719] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.127741] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.127774] DMAR: SATC flags: 0x1
<6>[ 0.127783] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.127788] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.127793] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.129845] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.134847] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.134866] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.134940] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.134946] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.135125] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.135130] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.135141] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.135150] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.135155] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.135163] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.135171] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.135186] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.135192] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.135197] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.135202] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.135207] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.135213] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.135218] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.135223] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.135228] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.135860] Freeing SMP alternatives memory: 48K
<6>[ 0.135860] pid_max: default: 32768 minimum: 301
<6>[ 0.135860] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.135860] landlock: Up and running.
<6>[ 0.135860] Yama: becoming mindful.
<6>[ 0.135860] AppArmor: AppArmor initialized
<6>[ 0.135860] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.135860] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.135860] Running RCU synchronous self tests
<6>[ 0.135860] Running RCU synchronous self tests
<6>[ 0.135860] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.135860] Running RCU Tasks wait API self tests
<6>[ 0.135860] Running RCU Tasks Rude wait API self tests
<6>[ 0.135860] Running RCU Tasks Trace wait API self tests
<6>[ 0.135860] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.135860] core: cpu_core PMU driver:
<6>[ 0.135870] ... version: 6
<6>[ 0.135874] ... bit width: 48
<6>[ 0.135878] ... generic registers: 10
<6>[ 0.135881] ... value mask: 0000ffffffffffff
<6>[ 0.135886] ... max period: 00007fffffffffff
<6>[ 0.135890] ... fixed-purpose events: 4
<6>[ 0.135893] ... event mask: 0001000f000003ff
<6>[ 0.135924] signal: max sigframe size: 3632
<6>[ 0.135945] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.136029] rcu: Hierarchical SRCU implementation.
<6>[ 0.136033] rcu: Max phase no-delay instances is 400.
<6>[ 0.136172] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.137977] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.138234] smp: Bringing up secondary CPUs ...
<6>[ 0.138577] smpboot: x86: Booting SMP configuration:
<6>[ 0.138584] .... node #0, CPUs: #1 #2 #3
<6>[ 0.142065] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.144872] #4 #5 #6 #7
<6>[ 0.010690] core: cpu_atom PMU driver:
<6>[ 0.010690] ... version: 6
<6>[ 0.010690] ... bit width: 48
<6>[ 0.010690] ... generic registers: 8
<6>[ 0.010690] ... value mask: 0000ffffffffffff
<6>[ 0.010690] ... max period: 00007fffffffffff
<6>[ 0.010690] ... fixed-purpose events: 6
<6>[ 0.010690] ... event mask: 00000077000000ff
<6>[ 0.152000] smp: Brought up 1 node, 8 CPUs
<6>[ 0.153098] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.154975] Memory: 32359948K/33158528K available (24294K kernel code, 5580K rwdata, 9276K rodata, 5628K init, 68404K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.156644] devtmpfs: initialized
<6>[ 0.157408] x86/mm: Memory block size: 128MB
<6>[ 0.175910] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.176330] Running RCU synchronous self tests
<6>[ 0.176342] Running RCU synchronous self tests
<6>[ 0.176359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.176359] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.176868] pinctrl core: initialized pinctrl subsystem
<6>[ 0.177368] PM: RTC time: 14:31:12, date: 2025-03-21
<6>[ 0.178223] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.179221] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.179533] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.179824] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.179889] audit: initializing netlink subsys (disabled)
<5>[ 0.180029] audit: type=2000 audit(1742567472.045:1): state=initialized audit_enabled=0 res=1
<6>[ 0.180996] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.180998] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.181005] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.181009] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.181013] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.181054] EISA bus registered
<6>[ 0.181081] cpuidle: using governor ladder
<6>[ 0.181081] cpuidle: using governor menu
<6>[ 0.181081] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.181919] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.181946] PCI: Using configuration type 1 for base access
<6>[ 0.182089] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.183909] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.183915] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.183920] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.183925] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.202861] raid6: avx2x4 gen() 75316 MB/s
<6>[ 0.219862] raid6: avx2x2 gen() 82845 MB/s
<6>[ 0.236861] raid6: avx2x1 gen() 76580 MB/s
<6>[ 0.236865] raid6: using algorithm avx2x2 gen() 82845 MB/s
<6>[ 0.253861] raid6: .... xor() 57751 MB/s, rmw enabled
<6>[ 0.253866] raid6: using avx2x2 recovery algorithm
<6>[ 0.254482] fbcon: Taking over console
<6>[ 0.255390] ACPI: Added _OSI(Module Device)
<6>[ 0.255390] ACPI: Added _OSI(Processor Device)
<6>[ 0.255390] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.255390] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.691122] ACPI: 32 ACPI AML tables successfully acquired and loaded
<6>[ 0.704429] ACPI: EC: EC started
<6>[ 0.704442] ACPI: EC: interrupt blocked
<6>[ 0.707089] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.707094] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.784898] Callback from call_rcu_tasks() invoked.
<6>[ 1.025475] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.025499] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.101949] ACPI: Interpreter enabled
<6>[ 1.102201] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.102214] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.112566] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.112583] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.134842] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.134892] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.208082] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.208938] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.217523] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.613465] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.655191] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.864237] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.866686] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.878454] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.887190] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.887439] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.887681] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.970530] ACPI: \: Can't tag data node
<3>[ 1.972431] ACPI: \: Can't tag data node
<3>[ 1.974638] ACPI: \: Can't tag data node
<3>[ 1.976318] ACPI: \: Can't tag data node
<3>[ 1.978500] ACPI: \: Can't tag data node
<6>[ 2.146763] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.147615] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.148384] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.149176] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.150390] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.152615] ACPI: \PIN_: New power resource
<6>[ 2.158737] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.158766] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.163958] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.179507] PCI host bridge to bus 0000:00
<6>[ 2.179569] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.179583] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.179595] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.179607] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.179620] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.179634] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.182860] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.184404] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.184500] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.184513] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.184526] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.184582] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.186490] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.186523] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 2.188733] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.188767] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.188778] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 2.190028] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.190069] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.190083] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.190103] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.190247] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.190309] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.197300] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.197344] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.197359] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.197379] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.197509] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.197564] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.203811] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.203855] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.203930] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.203951] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.204256] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.204311] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.210580] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.210623] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 2.210641] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.210923] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.210956] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.210967] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 2.211559] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.211613] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 2.211692] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.215094] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.215155] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 2.215168] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 2.215241] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.215248] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.218975] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.219036] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 2.219046] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 2.219119] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.219123] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.220496] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.220554] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 2.220624] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.223356] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.223447] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 2.223549] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.223938] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.223991] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 2.224059] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.225890] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.225953] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 2.225962] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 2.226254] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.226366] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.227746] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.227857] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.229201] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.229311] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.230658] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.230763] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.232093] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.232184] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 2.232281] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.234862] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.234896] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.234904] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.234912] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.235036] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.235093] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.239449] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.239554] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.239585] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.239922] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.240084] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.245065] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.246482] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.246598] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 2.246613] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 2.246724] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.247141] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.247209] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 2.247221] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.248341] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.248524] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.248759] pci 0000:00:1f.6: [8086:550f] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.248843] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.248931] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.250604] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.250768] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.250921] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.251103] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.251175] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.251186] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.251195] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.251358] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.251362] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.251918] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.254300] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.254888] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.254946] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.256039] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.256097] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.719758] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 12.652878] Low-power S0 idle used by default for system suspend
<6>[ 12.704542] ACPI: EC: interrupt unblocked
<6>[ 12.704553] ACPI: EC: event unblocked
<6>[ 12.704589] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 12.704596] ACPI: EC: GPE=0x6e
<6>[ 12.704603] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 12.704612] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 12.705208] iommu: Default domain type: Translated
<6>[ 12.705208] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 12.708120] SCSI subsystem initialized
<7>[ 12.709221] libata version 3.00 loaded.
<6>[ 12.709221] ACPI: bus type USB registered
<6>[ 12.709287] usbcore: registered new interface driver usbfs
<6>[ 12.709373] usbcore: registered new interface driver hub
<6>[ 12.709475] usbcore: registered new device driver usb
<6>[ 12.709772] pps_core: LinuxPPS API ver. 1 registered
<6>[ 12.709783] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 12.709830] PTP clock support registered
<6>[ 12.711085] EDAC MC: Ver: 3.0.0
<6>[ 12.713216] efivars: Registered efivars operations
<6>[ 12.716136] NetLabel: Initializing
<6>[ 12.716146] NetLabel: domain hash size = 128
<6>[ 12.716157] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 12.716328] NetLabel: unlabeled traffic allowed by default
<6>[ 12.716367] mctp: management component transport protocol core
<6>[ 12.716380] NET: Registered PF_MCTP protocol family
<6>[ 12.716460] PCI: Using ACPI for IRQ routing
<7>[ 12.778589] PCI: pci_cache_line_size set to 64 bytes
<6>[ 12.778889] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 12.779185] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 12.779204] e820: reserve RAM buffer [mem 0x68f52000-0x6bffffff]
<7>[ 12.779212] e820: reserve RAM buffer [mem 0x68f71000-0x6bffffff]
<7>[ 12.779219] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 12.779227] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 12.780933] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 12.780964] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 12.780980] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 12.781026] vgaarb: loaded
<6>[ 12.783394] clocksource: Switched to clocksource tsc-early
<5>[ 12.794252] VFS: Disk quotas dquot_6.6.0
<6>[ 12.794276] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 12.795160] AppArmor: AppArmor Filesystem Enabled
<6>[ 12.795324] pnp: PnP ACPI init
<6>[ 12.796194] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 12.796205] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 12.797462] system 00:02: [io 0x06a4] has been reserved
<6>[ 12.797470] system 00:02: [io 0x06a0] has been reserved
<6>[ 12.816260] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 12.816271] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 12.816282] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 12.816290] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 12.816300] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 12.816308] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 12.816317] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 12.816325] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 12.818972] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 12.821287] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 12.821431] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 12.826314] pnp: PnP ACPI: found 8 devices
<6>[ 12.846875] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 12.847579] NET: Registered PF_INET protocol family
<6>[ 12.847760] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.849644] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 12.849794] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 12.849953] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.850772] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 12.851827] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 12.852238] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.852935] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.853553] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 12.853616] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 12.853627] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 12.853635] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 12.853673] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 12.853679] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 12.853684] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 12.853786] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 12.853835] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 12.853881] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 12.853929] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 12.853975] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 12.854007] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 12.854017] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 12.854027] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 12.854035] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.854046] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 12.854052] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 12.854068] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 12.854076] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.854088] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 12.854094] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 12.854103] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 12.854111] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.854123] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 12.854128] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 12.854137] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 12.854149] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 12.854185] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 12.854231] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 12.854236] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 12.854240] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 12.854246] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 12.854251] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 12.854256] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 12.854261] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 12.854266] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.854272] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 12.854276] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 12.854281] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.854287] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 12.854291] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 12.854296] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.854302] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 12.854306] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 12.854311] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 12.855198] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 12.856623] PCI: CLS 0 bytes, default 64
<6>[ 12.856727] DMAR: No RMRR found
<6>[ 12.856735] DMAR: No ATSR found
<6>[ 12.856739] DMAR: dmar1: Using Queued invalidation
<6>[ 12.856805] DMAR: dmar0: Using Queued invalidation
<6>[ 12.856819] DMAR: dmar2: Using Queued invalidation
<6>[ 12.857902] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 12.857968] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 12.858025] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 12.858073] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 12.860895] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 12.864968] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 12.865646] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 12.866237] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 12.866321] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 12.866432] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 12.866491] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 12.866555] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 12.866652] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 12.866738] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 12.866837] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 12.866893] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 12.867012] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 12.867066] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 12.867123] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 12.867183] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 12.867266] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 12.867337] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 12.867437] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 12.867561] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 12.867618] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 12.867675] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 12.867740] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 12.867795] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 12.867872] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 12.867969] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 12.881183] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 12.881205] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 12.881213] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 12.886890] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 12.887054] clocksource: Switched to clocksource tsc
<6>[ 12.887217] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 12.892604] Initialise system trusted keyrings
<5>[ 12.892699] Key type blacklist registered
<6>[ 12.893004] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 12.902841] zbud: loaded
<6>[ 12.904328] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 12.904467] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 12.904475] ntfs3: Read-only LZX/Xpress compression included
<5>[ 12.905001] integrity: Platform Keyring initialized
<5>[ 12.905031] integrity: Machine keyring initialized
<6>[ 12.911243] xor: automatically using best checksumming function avx
<5>[ 12.911256] Key type asymmetric registered
<5>[ 12.911280] Asymmetric key parser 'x509' registered
<6>[ 12.911432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 12.911899] io scheduler mq-deadline registered
<6>[ 12.913018] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 12.914801] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 12.915182] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 12.916392] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 12.916776] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 12.917998] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 12.918321] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 12.919416] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 12.919755] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 12.921263] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 12.921626] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 12.922223] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 12.925251] Monitor-Mwait will be used to enter C-1 state
<7>[ 12.925383] Monitor-Mwait will be used to enter C-2 state
<7>[ 12.925438] Monitor-Mwait will be used to enter C-3 state
<6>[ 12.931395] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 12.931580] ACPI: button: Lid Switch [LID0]
<6>[ 12.931832] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 12.931995] ACPI: button: Sleep Button [SLPB]
<6>[ 12.932197] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 12.932582] ACPI: button: Power Button [PWRB]
<6>[ 13.102796] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 13.102814] ACPI: thermal: Thermal Zone [TZ00] (68 C)
<6>[ 13.103980] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 13.104239] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 13.105231] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 13.127553] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 13.142621] serial 0000:00:12.0: enabling device (0000 -> 0002)
<4>[ 13.151982] hpet_acpi_add: no address or irqs in _CRS
<6>[ 13.152159] Linux agpgart interface v0.103
<6>[ 13.184087] ACPI: bus type drm_connector registered
<6>[ 13.207180] loop: module loaded
<6>[ 13.254895] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.418765] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.549832] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 13.676800] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 13.791156] Key type psk registered
<6>[ 13.794699] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 13.795436] nvme nvme0: pci function 0000:80:00.0
<6>[ 13.795565] tun: Universal TUN/TAP device driver, 1.6
<6>[ 13.796434] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.796569] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 13.798494] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.800287] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.800312] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 13.800331] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.800716] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.800739] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.800749] usb usb1: Product: xHCI Host Controller
<6>[ 13.800756] usb usb1: Manufacturer: Linux 6.14.0-rc7-xe+ xhci-hcd
<6>[ 13.800765] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 13.801628] hub 1-0:1.0: USB hub found
<6>[ 13.801715] hub 1-0:1.0: 1 port detected
<6>[ 13.806139] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.806157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.806167] usb usb2: Product: xHCI Host Controller
<6>[ 13.806175] usb usb2: Manufacturer: Linux 6.14.0-rc7-xe+ xhci-hcd
<6>[ 13.806183] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 13.806864] hub 2-0:1.0: USB hub found
<6>[ 13.806914] hub 2-0:1.0: 3 ports detected
<6>[ 13.830484] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.830532] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 13.830726] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 13.832397] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.834155] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.834187] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 13.834208] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.834445] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.834459] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.834469] usb usb3: Product: xHCI Host Controller
<6>[ 13.834476] usb usb3: Manufacturer: Linux 6.14.0-rc7-xe+ xhci-hcd
<6>[ 13.834485] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 13.835270] hub 3-0:1.0: USB hub found
<6>[ 13.835332] hub 3-0:1.0: 8 ports detected
<6>[ 13.838663] nvme0n1: p1 p2
<6>[ 13.863416] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.863439] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.863449] usb usb4: Product: xHCI Host Controller
<6>[ 13.863457] usb usb4: Manufacturer: Linux 6.14.0-rc7-xe+ xhci-hcd
<6>[ 13.863466] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 13.864097] hub 4-0:1.0: USB hub found
<6>[ 13.864146] hub 4-0:1.0: 2 ports detected
<6>[ 13.871589] usbcore: registered new interface driver usb-storage
<6>[ 13.871760] usbcore: registered new interface driver usbserial_generic
<6>[ 13.871901] usbserial: USB Serial support registered for generic
<6>[ 13.871959] usbcore: registered new interface driver ftdi_sio
<6>[ 13.871995] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 13.872057] usbcore: registered new interface driver pl2303
<6>[ 13.872095] usbserial: USB Serial support registered for pl2303
<6>[ 13.872231] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 13.872241] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 14.583611] i8042: Can't read CTR while initializing i8042
<3>[ 14.583623] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 14.584360] mousedev: PS/2 mouse device common for all mice
<6>[ 14.585251] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 14.587139] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 14.587362] rtc_cmos rtc_cmos: setting system clock to 2025-03-21T14:31:27 UTC (1742567487)
<6>[ 14.587534] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 14.587592] i2c_dev: i2c /dev entries driver
<6>[ 14.591853] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 14.591870] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 14.591880] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 14.591926] device-mapper: uevent: version 1.0.3
<6>[ 14.592243] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 14.592381] platform eisa.0: Probing EISA bus 0
<4>[ 14.592393] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 14.592407] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 14.592419] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 14.592430] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 14.592442] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 14.592453] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 14.592464] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 14.592475] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 14.592486] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 14.592495] platform eisa.0: EISA: Detected 0 cards
<6>[ 14.592505] intel_pstate: Intel P-state driver initializing
<6>[ 14.595471] Hybrid CPU capacity scaling enabled
<6>[ 14.596585] intel_pstate: HWP enabled
<6>[ 14.596594] sdhci: Secure Digital Host Controller Interface driver
<6>[ 14.596602] sdhci: Copyright(c) Pierre Ossman
<6>[ 14.596845] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 14.599628] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 14.601100] drop_monitor: Initializing network drop monitor service
<6>[ 14.601463] NET: Registered PF_INET6 protocol family
<6>[ 14.605117] Segment Routing with IPv6
<6>[ 14.605193] In-situ OAM (IOAM) with IPv6
<6>[ 14.605259] NET: Registered PF_PACKET protocol family
<5>[ 14.605523] Key type dns_resolver registered
<4>[ 14.609600] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 14.609930] microcode: Current revision: 0x0000011c
<6>[ 14.610614] IPI shorthand broadcast: enabled
<6>[ 14.626337] sched_clock: Marking stable (14616001048, 9690456)->(14704027305, -78335801)
<6>[ 14.627085] registered taskstats version 1
<5>[ 14.628483] Loading compiled-in X.509 certificates
<6>[ 14.657075] Demotion targets for Node 0: null
<6>[ 14.657291] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 14.657294] kmemleak: Automatic memory scanning thread started
<5>[ 14.657507] Key type .fscrypt registered
<5>[ 14.657512] Key type fscrypt-provisioning registered
<6>[ 14.660174] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 14.660296] Key type trusted registered
<5>[ 14.662237] Key type encrypted registered
<6>[ 14.662251] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 14.662356] Loading compiled-in module X.509 certificates
<5>[ 14.663163] Loaded X.509 cert 'Build time autogenerated kernel key: 958adc91f370cb5a17dfde9ce226dd92824a58b1'
<6>[ 14.663178] ima: Allocated hash algorithm: sha256
<6>[ 14.681408] ima: No architecture policies found
<6>[ 14.681632] evm: Initialising EVM extended attributes:
<6>[ 14.681644] evm: security.selinux
<6>[ 14.681651] evm: security.SMACK64
<6>[ 14.681658] evm: security.SMACK64EXEC
<6>[ 14.681665] evm: security.SMACK64TRANSMUTE
<6>[ 14.681673] evm: security.SMACK64MMAP
<6>[ 14.681680] evm: security.apparmor
<6>[ 14.681687] evm: security.ima
<6>[ 14.681703] evm: security.capability
<6>[ 14.681710] evm: HMAC attrs: 0x1
<6>[ 14.686494] PM: Magic number: 1:522:536
<6>[ 14.686542] tty ttyS16: hash matches
<6>[ 14.686583] port serial8250:0.15: hash matches
<6>[ 14.686943] printk: legacy console [netcon0] enabled
<6>[ 14.686960] netconsole: network logging started
<6>[ 14.688119] RAS: Correctable Errors collector initialized.
<6>[ 14.689231] clk: Disabling unused clocks
<6>[ 14.689262] PM: genpd: Disabling unused power domains
<6>[ 14.690378] md: Waiting for all devices to be available before autodetect
<6>[ 14.690393] md: If you don't use raid, use raid=noautodetect
<6>[ 14.690406] md: Autodetecting RAID arrays.
<6>[ 14.690425] md: autorun ...
<6>[ 14.690433] md: ... autorun DONE.
<6>[ 14.747480] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none.
<6>[ 14.747551] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 14.748258] devtmpfs: mounted
<6>[ 14.758813] Freeing unused decrypted memory: 2028K
<6>[ 14.759707] Freeing unused kernel image (initmem) memory: 5628K
<6>[ 14.759729] Write protecting the kernel read-only data: 34816k
<6>[ 14.760196] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[ 14.760520] Freeing unused kernel image (rodata/data gap) memory: 964K
<6>[ 14.764996] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 14.765590] Run /sbin/init as init process
<7>[ 14.765595] with arguments:
<7>[ 14.765596] /sbin/init
<7>[ 14.765597] with environment:
<7>[ 14.765598] HOME=/
<7>[ 14.765598] TERM=linux
<7>[ 14.765599] BOOT_IMAGE=/boot/drm_intel
<7>[ 14.810830] systemd[1]: Inserted module 'autofs4'
<7>[ 14.828599] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 14.828641] systemd[1]: Detected architecture x86-64.
<7>[ 14.830094] systemd[1]: Hostname set to <shard-lnl-5>.
<7>[ 15.110771] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.150651] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.155284] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.158375] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.158844] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.159979] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 15.160172] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC...
<7>[ 15.160313] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.160443] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.160547] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.160651] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.160763] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.161139] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.161657] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.162023] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.162416] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.162781] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.163012] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.163332] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.163654] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.163937] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.164115] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.164377] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.164615] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 15.167830] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 15.170360] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 15.173066] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 15.175822] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 15.181383] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 15.185253] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 15.188306] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 15.191861] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 15.195410] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 15.197945] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 15.200632] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 15.203595] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 15.211309] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 15.217261] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 15.217975] systemd-journald[212]: Collecting audit messages is disabled.
<7>[ 15.221830] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 15.222048] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 15.223577] pstore: Using crash dump compression: deflate
<6>[ 15.225289] pstore: Registered efi_pstore as persistent store backend
<7>[ 15.226924] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 15.231636] fuse: init (API version 7.42)
<7>[ 15.232367] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 15.232485] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.232556] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.236841] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 15.242413] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.388864] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. Quota mode: none.
<6>[ 15.416812] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:411435008k SS
<7>[ 15.428490] systemd-journald[212]: Received client request to flush runtime journal.
<7>[ 15.446162] systemd-journald[212]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 15.446176] systemd-journald[212]: Rotating system journal.
<4>[ 16.138817] nvme nvme0: using unchecked data buffer
<6>[ 16.246910] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 16.331302] pci 0000:00:05.0: Setting to D3hot
<6>[ 16.342130] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 16.343239] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.354754] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.354920] intel_pmc_core INT33A1:00: initialized
<6>[ 16.356262] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 16.357021] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<3>[ 16.420221] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 16.421928] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<5>[ 16.475258] audit: type=1400 audit(1742567489.386:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=429 comm="apparmor_parser"
<5>[ 16.475979] audit: type=1400 audit(1742567489.387:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=433 comm="apparmor_parser"
<5>[ 16.476857] audit: type=1400 audit(1742567489.387:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=430 comm="apparmor_parser"
<5>[ 16.477950] audit: type=1400 audit(1742567489.389:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=428 comm="apparmor_parser"
<5>[ 16.480160] audit: type=1400 audit(1742567489.391:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=434 comm="apparmor_parser"
<5>[ 16.480646] audit: type=1400 audit(1742567489.391:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=431 comm="apparmor_parser"
<5>[ 16.480963] audit: type=1400 audit(1742567489.392:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=432 comm="apparmor_parser"
<5>[ 16.481334] audit: type=1400 audit(1742567489.392:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=439 comm="apparmor_parser"
<5>[ 16.483307] audit: type=1400 audit(1742567489.394:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=436 comm="apparmor_parser"
<5>[ 16.484065] audit: type=1400 audit(1742567489.395:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=440 comm="apparmor_parser"
<6>[ 16.768832] ACPI: bus type thunderbolt registered
<6>[ 16.796599] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 16.811964] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 16.814516] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 16.832577] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 16.840580] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 16.840586] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 16.865857] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 16.877805] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 16.877809] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 16.895851] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 16.897685] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 16.897774] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 16.925066] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 16.960073] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 16.969011] intel_rapl_common: Found RAPL domain package
<6>[ 16.969017] intel_rapl_common: Found RAPL domain dram
<6>[ 17.025341] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 176
<6>[ 17.025350] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 17.046785] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 17.078680] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 17.088752] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 17.088757] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 17.088759] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 17.088760] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 17.088761] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 17.088762] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 17.173175] cryptd: max_cpu_qlen set to 1000
<6>[ 17.189389] AES CTR mode by8 optimization enabled
<6>[ 17.238230] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 17.263464] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 17.263470] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 17.263472] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<4>[ 17.291583] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.395221] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.490424] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:90
<6>[ 17.490430] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 17.490543] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 17.553514] evm: overlay not supported
<6>[ 17.855830] intel_rapl_common: Found RAPL domain package
<6>[ 17.855837] intel_rapl_common: Found RAPL domain core
<6>[ 17.855839] intel_rapl_common: Found RAPL domain uncore
<6>[ 17.855841] intel_rapl_common: Found RAPL domain dram
<6>[ 17.855843] intel_rapl_common: Found RAPL domain psys
<6>[ 17.915325] loop0: detected capacity change from 0 to 8
<4>[ 17.923064] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[ 17.948753] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 17.968037] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[ 17.981485] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 17.981509] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 18.280668] hid: raw HID events driver (C) Jiri Kosina
<6>[ 18.290608] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 18.320445] Consider using thermal netlink events interface
<6>[ 18.325793] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 18.333111] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.337717] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.339587] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.340442] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.342150] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.343339] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.348863] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.353945] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.358434] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.361623] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.365150] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.367550] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.485142] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 19.534401] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 19.534423] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 20.557672] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 20.557703] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 23.554832] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<4>[ 28.779903] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<7>[ 29.148280] systemd-journald[212]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 51.265937] [IGT] xe_module_load: executing
<7>[ 51.276201] [IGT] xe_module_load: starting subtest load
<5>[ 51.466389] Setting dangerous option force_probe - tainting kernel
<6>[ 51.469240] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 51.470957] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 51.470969] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 51.471076] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 51.471166] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 51.475075] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 51.479230] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 51.479321] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 51.479388] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 51.479451] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.479511] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 51.479569] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.479626] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.479681] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.479762] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.479833] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.479904] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.479971] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.480031] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.480081] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.480131] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.480226] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 51.481474] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.490758] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.491841] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.491936] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 51.492052] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 51.492137] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 51.492220] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 51.492299] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.492375] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 51.493013] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 51.497177] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 51.497267] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.497336] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 51.497403] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.497467] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 51.497532] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.497594] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.497657] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.497733] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.497805] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.497876] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.497946] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.498014] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.498077] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 51.499604] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 51.502312] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1345
<6>[ 51.503343] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 51.503485] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 51.503662] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 51.505152] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.505669] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.526170] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 21ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.526796] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.527068] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 51.527351] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 51.527610] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 51.527900] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 51.528200] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 51.528488] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 51.529496] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 51.530008] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 51.530400] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6feec018
<7>[ 51.530814] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 51.531141] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 51.531443] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 51.531802] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 51.532089] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 51.532429] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 51.532715] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 51.533069] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 51.533411] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 51.533767] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 51.534125] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 51.534539] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 51.534947] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 51.535284] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 51.535613] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 51.535969] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.536284] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.536583] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 51.536905] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.537206] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.537486] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.537765] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 51.538024] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.538314] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.538568] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.538821] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 51.539048] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.539279] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.539555] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.539807] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 51.540033] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.540258] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.540471] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.540678] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 51.540933] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 51.541125] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 51.541313] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 51.541512] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 51.542479] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 51.542794] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 51.543036] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 51.543276] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 51.543470] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 51.543642] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 51.543834] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 51.543991] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 51.544137] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 51.544300] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 51.544459] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 51.544594] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 51.544728] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 51.544858] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 51.544981] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 51.545097] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 51.545217] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 51.545347] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 51.545471] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 51.545594] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.545736] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.545870] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 51.545986] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 51.546101] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 51.546220] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.546322] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.546415] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 51.546511] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 51.546663] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.546860] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 51.547040] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.547245] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 51.547458] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 51.547620] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 51.547757] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 51.547872] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 51.548013] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 51.548123] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 51.548149] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 51.548272] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 51.548373] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 51.548469] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 51.548737] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 51.548903] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 51.549856] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 51.549959] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 51.550050] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 51.550130] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 51.550208] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 51.550284] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 51.550359] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 51.550432] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 51.551628] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 51.551741] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 51.551835] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 51.551934] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 51.552026] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 51.552110] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 51.552199] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 51.552278] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 51.552357] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.552433] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 51.552508] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.552581] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 51.552654] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.552738] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 51.552820] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 51.552891] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 51.552961] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.553035] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 51.553110] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.553186] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 51.553260] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.553342] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 51.553435] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 51.553520] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 51.553605] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 51.553706] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 51.553804] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 51.553901] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 51.553994] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 51.554086] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 51.556200] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 51.559120] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 51.559277] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 51.559426] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 51.559649] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 51.559882] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 51.560097] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 51.560239] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 51.560376] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 51.560516] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 51.560647] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 51.561036] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 51.561161] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 51.561282] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 51.561400] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 51.561546] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 51.561806] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.561941] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.562065] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.562185] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.562304] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.562576] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.562887] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.564514] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 51.564839] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<6>[ 51.565312] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 51.566898] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 51.567503] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 51.568403] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 51.569715] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 51.570241] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 51.572332] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.582508] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.582519] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.582521] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.582522] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.582525] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.582527] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.582532] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.582533] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.582536] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.582573] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.582574] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.582576] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.582584] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.583149] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 51.583704] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 51.583844] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 51.583993] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 51.584096] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 51.584223] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 51.584310] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 51.584392] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 51.584472] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 51.584551] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 51.584662] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 51.584874] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 51.585067] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.585189] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.585481] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 51.585601] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.585723] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.585970] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 51.586096] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 51.586208] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.586651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 51.586808] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 51.586953] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 51.587050] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 51.587132] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 51.587212] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 51.587291] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 51.587370] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 51.587447] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 51.587525] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 51.587602] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 51.587681] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 51.587776] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 51.587873] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 51.587972] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 51.588055] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 51.588130] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 51.588201] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 51.588271] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 51.588341] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 51.588410] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 51.589175] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 51.589278] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 51.589352] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 51.589429] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 51.589494] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.589558] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.589623] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.589706] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 51.589799] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 51.589888] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.589962] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.590030] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.590098] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 51.590171] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 51.590236] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 51.590300] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 51.590363] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 51.590450] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 51.590525] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 51.590599] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 51.590673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 51.590863] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 51.590959] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 51.591044] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 51.591113] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 51.591178] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 51.591242] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 51.591305] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 51.591367] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 51.591429] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 51.591490] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 51.591550] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 51.591611] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 51.591676] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 51.591751] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 51.591820] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 51.591890] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 51.591960] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 51.592024] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 51.592236] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 51.592310] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.592383] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 51.592453] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 51.592546] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7>[ 51.592635] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7>[ 51.592761] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 51.592857] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 51.593039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 51.593139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.593236] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 51.593323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.593403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.593483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.593561] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.593644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 51.593740] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.593837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.593934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.594023] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 51.594098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.594170] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 51.594242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.594313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 51.594385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 51.594456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 51.594527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.594604] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.594678] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.594762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.594843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.594922] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.594999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.595069] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.595137] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.595205] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.595271] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 51.595338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 51.595403] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.595467] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.595533] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.595602] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.595675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.595759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.595835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.595909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.595985] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.596053] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.596119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.596185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 51.596251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 51.596481] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 51.596563] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 51.630887] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 51.702727] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 51.844836] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 51.844840] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 51.844841] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 51.844953] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 51.845123] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.845208] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.845281] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.845373] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 51.845466] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 51.845557] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 51.845619] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 51.845681] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 51.845757] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 51.846547] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 51.846620] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 51.846700] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 51.846764] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 51.846830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 51.846911] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 51.846986] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 51.847055] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 51.847124] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 51.847189] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.847253] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.847316] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.847376] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.847435] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.847493] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.847551] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.847608] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.847668] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.847737] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.847799] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.847857] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.847921] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.847983] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.848044] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.848103] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.848158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 51.848218] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x2050] = 0x10001000
<7>[ 51.848279] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 51.848337] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 51.848396] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 51.848453] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 51.848510] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 51.848571] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 51.848633] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 51.848693] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 51.848769] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 51.848830] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 51.848901] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 51.848969] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 51.849205] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 51.849266] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x22050] = 0x10001000
<7>[ 51.849320] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 51.849371] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 51.849604] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 51.849661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee050] = 0x10001000
<7>[ 51.849728] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 51.849784] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 51.850097] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 51.850153] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a050] = 0x10001000
<7>[ 51.850204] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 51.850253] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 51.850304] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 51.850354] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 51.850404] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 51.850804] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 51.850879] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 51.850951] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 51.851017] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 51.851076] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 51.851132] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 51.851186] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 51.851238] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 51.851290] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 51.851340] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 51.851389] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 51.851437] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 51.851484] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 51.851532] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 51.851596] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 51.851785] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 51.854111] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 51.867867] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 51.868632] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 51.868722] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 51.877927] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.878354] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 51.879657] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 51.879824] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 51.879952] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 51.880066] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 51.880179] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 51.880288] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 51.880396] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 51.880506] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 51.880639] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7>[ 51.886848] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 51.887073] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7>[ 51.887270] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 51.891617] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 51.898708] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 51.898714] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 51.898717] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 51.898719] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 51.898721] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 51.898723] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 51.898725] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 51.898727] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 51.898729] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 51.898731] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 51.898796] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 51.899089] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 51.899358] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 51.901033] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 51.901291] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 51.901550] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 51.901819] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 51.902058] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 51.902345] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 51.902563] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 51.902880] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[ 51.903085] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[ 51.903292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[ 51.903494] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 51.903686] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 51.903899] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 51.904071] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 51.904238] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 51.904428] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 51.904602] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 51.904765] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 51.904908] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 51.905072] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 51.905215] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 51.905347] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 51.905474] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 51.905600] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 51.905747] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 51.905866] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 51.905980] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 51.906093] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 51.906207] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 51.906337] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c0050] = 0x10001000
<7>[ 51.906462] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 51.907582] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 51.907742] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c8050] = 0x10001000
<7>[ 51.907874] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 51.908286] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 51.908407] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a050] = 0x10001000
<7>[ 51.908509] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 51.909159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 51.909275] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 51.909368] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 51.909454] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 51.909533] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 51.909609] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 51.909683] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 51.909774] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 51.909841] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 51.909907] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 51.909971] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 51.910033] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 51.910093] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 51.910153] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 51.910235] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 51.910331] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 51.929342] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 51.930463] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 51.930606] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[ 51.930677] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 51.951177] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 51.951639] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 51.952823] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.955928] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.960185] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 52.002751] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 52.005668] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 52.006126] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 52.006564] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 52.006943] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 52.007404] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 52.007820] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.008210] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.008586] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 52.010852] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 52.011259] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 52.011629] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 52.024422] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 52.038043] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 52.044757] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 52.045938] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 52.049649] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 52.049810] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 52.050535] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 52.051663] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 52.051743] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 52.052332] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 52.053225] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 52.053280] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 52.053756] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 52.054516] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 52.054550] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 52.054600] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 52.062331] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 52.064662] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 52.065730] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 52.065846] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 52.066304] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[ 52.067181] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<6>[ 52.067206] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 52.067267] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 52.067348] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 52.067426] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 52.067653] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.067763] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 52.068159] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.068176] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.068932] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.069455] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.069583] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.069717] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.069932] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.069938] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.069939] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.069941] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.069943] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.069945] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.069949] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.069950] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.069953] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.069973] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.070085] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.070737] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.070875] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 52.071890] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<7>[ 52.071919] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01
<5>[ 52.072162] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.072165] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.072167] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.072201] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.072216] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.072228] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.072239] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.072434] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.072581] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[ 52.072592] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.072601] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.072610] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.072685] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL
<7>[ 52.072692] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled
<7>[ 52.072772] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.072900] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[ 52.072910] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.072918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.072926] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.073059] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.073164] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[ 52.073171] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.073178] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.073181] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.073182] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.073184] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.073382] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.073401] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[ 52.073403] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 52.073590] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.073669] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 52.073686] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<7>[ 52.073690] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.073930] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 52.073983] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.074112] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.081002] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01d97000
<6>[ 52.082268] fbcon: xedrmfb (fb0) is primary device
<7>[ 52.083420] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 52.083568] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 52.083677] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 52.083816] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 52.083940] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 52.084063] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 52.084183] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 52.084295] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 52.084388] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 52.084485] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 52.084589] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 52.084708] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 52.084820] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 52.084930] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 52.085040] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 52.085147] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 52.085254] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 52.085415] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 52.085578] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 52.085765] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 52.085928] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 52.086083] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 52.086237] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 52.086389] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 52.086540] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 52.086691] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 52.086866] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 52.087018] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 52.087167] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 52.087332] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 52.087495] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 52.087737] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 52.087927] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 52.088088] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 52.088238] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 52.088396] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 52.088539] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.088677] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.088830] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.088966] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.089098] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.089244] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.089374] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.089506] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.089642] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.089789] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.089924] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.090073] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.090205] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.090311] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.090398] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.090480] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.090562] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 52.090642] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.090730] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.090813] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 52.090897] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 52.091031] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 52.091165] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 52.091283] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.091396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.091508] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 52.091639] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 52.091801] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 52.091931] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 52.092041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 52.092148] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 52.092255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 52.092355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 52.092456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 52.092555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 52.092654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 52.092762] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 52.092859] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 52.092955] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 52.093050] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 52.093141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 52.093219] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 52.093295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 52.093372] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 52.093447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 52.093522] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 52.093597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 52.093671] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 52.093763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 52.093858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 52.093953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 52.094046] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.094129] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.094204] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 52.094279] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 52.094353] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 52.094426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 52.094494] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 52.094565] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 52.094637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 52.094713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 52.094799] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 52.094883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 52.094964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 52.095043] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 52.095111] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.095181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.095251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.095324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 52.095407] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 52.095498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.095586] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.095659] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.095745] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 52.095832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 52.095920] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 52.096006] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 52.096086] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 52.096163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 52.096241] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 52.096317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 52.096394] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 52.096886] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7>[ 52.104814] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.104992] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.105098] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.105191] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 52.105273] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.105348] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.105421] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.105493] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 52.105565] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.105637] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.105728] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.105805] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 52.105878] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.105948] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.106017] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.106085] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 52.106152] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.106220] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.106288] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.106357] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 52.106425] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.106493] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.106561] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.106629] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 52.106703] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<6>[ 52.106737] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 52.106772] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.106840] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.106908] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 52.106932] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 52.106976] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.107043] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.107111] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.107178] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 52.107246] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.107313] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.107380] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 52.107447] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 52.111053] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 52.111613] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 52.112090] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 52.112567] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 52.129652] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 52.303963] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 52.305028] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 52.308255] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 52.308530] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 52.308782] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 52.309084] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 52.309286] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 52.361339] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 52.361759] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 52.392938] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.393494] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 52.393458] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.394657] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.394675] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 52.395078] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 52.395415] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 52.395730] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 52.396042] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 52.395998] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.396323] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 52.396376] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.396592] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 52.396738] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 52.396883] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 52.397099] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.397194] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 52.397452] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 52.397716] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 52.397964] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 52.398210] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 52.398456] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 52.398744] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 52.399902] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 52.400255] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining)
<7>[ 52.539561] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 52.902837] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[ 52.903227] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.903567] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 52.903994] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 52.940062] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.940441] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.940784] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 52.941152] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 53.095513] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.095513] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.095513] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.132857] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 53.136946] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 53.137455] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 53.142351] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 53.143719] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 53.145052] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 53.146405] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 53.147562] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 53.149036] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 53.149355] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 53.151178] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 53.151479] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 53.152297] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 53.152925] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 53.153321] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 53.153785] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 53.156496] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 53.156525] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 53.156897] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 53.169679] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 53.172821] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 53.173302] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 53.174917] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 53.178134] Console: switching to colour frame buffer device 180x56
<6>[ 53.191907] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 53.197770] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 53.198576] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 53.198904] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 53.199164] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 53.199424] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 53.199683] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 53.199952] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 53.200204] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 53.200449] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 53.200687] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 53.200953] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 53.201195] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 53.201430] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 53.201663] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 53.201916] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 53.202159] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 53.202377] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 53.202591] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 53.202823] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 53.203035] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 53.203245] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 53.203455] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 53.204689] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 53.204779] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 53.204950] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 53.205290] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 53.205675] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 53.206954] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 53.207336] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 53.207555] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 53.207942] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 53.208273] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 53.211692] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 53.212843] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 53.213306] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 53.213820] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 53.214975] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 53.215000] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.215009] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.215016] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 53.215027] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.215033] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 53.215053] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.215060] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 53.215069] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.215134] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 53.215569] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 53.216758] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 53.217192] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 53.217858] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[ 53.219540] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.219550] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 53.219555] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 53.219647] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 53.220100] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.220139] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 53.220180] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 53.222629] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 53.223128] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 53.223534] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 53.224053] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.224756] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 53.224802] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 53.224839] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 53.225276] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.225659] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 53.225715] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 53.225751] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 53.226181] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 53.226524] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 53.226560] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 53.226572] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 53.226579] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 53.226585] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 53.227071] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 53.227156] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[ 53.227166] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 53.227306] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 53.231316] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 53.231742] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 53.237843] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 53.253997] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 53.254158] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 53.254274] [IGT] xe_module_load: exiting, ret=0
<7>[ 53.314201] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 53.314328] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 53.326752] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 53.326904] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 53.327006] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 54.248111] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.248114] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.248131] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.784470] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 55.784824] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067