<5>[    0.000000] Linux version 6.14.0-rc6-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Sat Mar 15 19:34:19 UTC 2025
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   Intel GenuineIntel
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000]   Hygon HygonGenuine
<6>[    0.000000]   Centaur CentaurHauls
<6>[    0.000000]   zhaoxin   Shanghai  
<6>[    0.000000] x86/tme: not enabled by BIOS
<6>[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] APIC: Static calls initialized
<6>[    0.000000] efi: EFI v2.7 by Intel
<6>[    0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fef5000 SMBIOS=0x6cbc7000 MEMATTR=0x68f39018 ESRT=0x68f71098 MOKvar=0x6cd0c000 TPMEventLog=0x6ff5a018 
<6>[    0.000000] efi: Remove mem254: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[    0.000000] efi: Remove mem256: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[    0.000000] SMBIOS 3.8 present.
<6>[    0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D86.2501240726 01/24/2025
<6>[    0.000000] DMI: Memory slots populated: 8/8
<6>[    0.000000] tsc: Detected 3100.000 MHz processor
<6>[    0.000000] tsc: Detected 3110.400 MHz TSC
<7>[    0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[    0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[    0.000018] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
<6>[    0.000376] x2apic: enabled by BIOS, switching to x2apic ops
<6>[    0.000377] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[    0.004651] esrt: Reserving ESRT space from 0x0000000068f71098 to 0x0000000068f711e8.
<7>[    0.004658] e820: update [mem 0x68f71000-0x68f71fff] usable ==> reserved
<6>[    0.004676] Using GB pages for direct mapping
<6>[    0.005358] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[    0.005359] printk: early log buf free: 258888(98%)
<6>[    0.005359] Secure boot disabled
<6>[    0.005361] ACPI: Early table checksum verification disabled
<6>[    0.005364] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[    0.005367] ACPI: XSDT 0x000000006FF71228 0001A4 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005370] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL  LNL      00000002      01000013)
<6>[    0.005373] ACPI: DSDT 0x000000006FFB6000 0254DE (v02 INTEL  LNL      00000002      01000013)
<6>[    0.005375] ACPI: FACS 0x000000006FED9000 000040
<6>[    0.005376] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[    0.005378] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef  Cpu0Ist  00003000 INTL 20210930)
<6>[    0.005379] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef  Cpu0Hwp  00003000 INTL 20210930)
<6>[    0.005380] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20210930)
<6>[    0.005382] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20210930)
<6>[    0.005383] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef  ApIst    00003000 INTL 20210930)
<6>[    0.005384] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef  ApHwp    00003000 INTL 20210930)
<6>[    0.005386] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef  ApPsd    00003000 INTL 20210930)
<6>[    0.005387] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef  ApCst    00003000 INTL 20210930)
<6>[    0.005388] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt  00003000 INTL 20210930)
<6>[    0.005390] ACPI: DTPR 0x000000006FFEC000 000090 (v01                 00000000      00000000)
<6>[    0.005391] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL  PDatTabl 00001000 INTL 20210930)
<6>[    0.005392] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL  IgfxSsdt 00003000 INTL 20210930)
<6>[    0.005394] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL  TseSsdt  00001000 INTL 20210930)
<6>[    0.005395] ACPI: SSDT 0x000000006FFDD000 009156 (v02 INTEL  TcssSsdt 00001000 INTL 20210930)
<6>[    0.005396] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL  IpuSsdt  00001000 INTL 20210930)
<6>[    0.005397] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL  LnlMRvp1 00001000 INTL 20210930)
<6>[    0.005399] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL  I2Pm_Rvp 00001000 INTL 20210930)
<6>[    0.005400] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL  Ther_Rvp 00001000 INTL 20210930)
<6>[    0.005401] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005402] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005404] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL  LNL      00000000      01000013)
<6>[    0.005405] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005406] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL  PepoSsdt 00001000 INTL 20210930)
<6>[    0.005408] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[    0.005409] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[    0.005410] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL  Cnv_Ssdt 00001000 INTL 20210930)
<6>[    0.005411] ACPI: SSDT 0x000000006FF85000 00060E (v02 INTEL  Tpm2Tabl 00001000 INTL 20210930)
<6>[    0.005413] ACPI: TPM2 0x000000006FF84000 00004C (v04 INTEL  LNL      00000002      01000013)
<6>[    0.005414] ACPI: LPIT 0x000000006FF83000 0000CC (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005415] ACPI: SSDT 0x000000006FF82000 000D5C (v02 INTEL  PtidDevc 00001000 INTL 20210930)
<6>[    0.005416] ACPI: SSDT 0x000000006FF81000 0001F0 (v02 INTEL  TbtTypeC 00000000 INTL 20210930)
<6>[    0.005418] ACPI: DBGP 0x000000006FF80000 000034 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005419] ACPI: DBG2 0x000000006FF7F000 000054 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005420] ACPI: NHLT 0x000000006FF7E000 0002E3 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005422] ACPI: SSDT 0x000000006FF7C000 00115C (v02 INTEL  UsbCTabl 00001000 INTL 20210930)
<6>[    0.005423] ACPI: SSDT 0x000000006FF75000 00653B (v02 INTEL  EcSsdt   00000000 INTL 20210930)
<6>[    0.005424] ACPI: ECDT 0x000000006FF74000 000069 (v01        LNL      00000002      01000013)
<6>[    0.005425] ACPI: DMAR 0x000000006FF73000 0000D8 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005427] ACPI: FPDT 0x000000006FF72000 000044 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005428] ACPI: SSDT 0x000000006FFA8000 00086D (v02 INTEL  xh_lnl_m 00000000 INTL 20210930)
<6>[    0.005429] ACPI: SSDT 0x000000006FF6F000 0013DB (v02 SocGpe SocGpe   00003000 INTL 20210930)
<6>[    0.005431] ACPI: SSDT 0x000000006FF6C000 002463 (v02 SocCmn SocCmn   00003000 INTL 20210930)
<6>[    0.005432] ACPI: SDEV 0x000000006FF6B000 000046 (v01                 00000000      00000000)
<6>[    0.005433] ACPI: SSDT 0x000000006FF60000 00A4FA (v02 INTEL  St09Ssdt 00001000 INTL 20210930)
<6>[    0.005435] ACPI: PHAT 0x000000006FF5F000 0007C0 (v01 INTEL  LNL      00000005 MSFT 0100000D)
<6>[    0.005436] ACPI: BGRT 0x000000006FF5E000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005437] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113]
<6>[    0.005438] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb4dd]
<6>[    0.005438] ACPI: Reserving FACS table memory at [mem 0x6fed9000-0x6fed903f]
<6>[    0.005438] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[    0.005439] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[    0.005439] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[    0.005439] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[    0.005440] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[    0.005440] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[    0.005440] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[    0.005440] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[    0.005441] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[    0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[    0.005441] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[    0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[    0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f]
<6>[    0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[    0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6155]
<6>[    0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df]
<6>[    0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2]
<6>[    0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e]
<6>[    0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955]
<6>[    0.005444] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037]
<6>[    0.005444] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[    0.005444] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7]
<6>[    0.005445] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b]
<6>[    0.005445] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2]
<6>[    0.005445] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320]
<6>[    0.005445] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469]
<6>[    0.005446] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815]
<6>[    0.005446] ACPI: Reserving SSDT table memory at [mem 0x6ff85000-0x6ff8560d]
<6>[    0.005446] ACPI: Reserving TPM2 table memory at [mem 0x6ff84000-0x6ff8404b]
<6>[    0.005447] ACPI: Reserving LPIT table memory at [mem 0x6ff83000-0x6ff830cb]
<6>[    0.005447] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff82d5b]
<6>[    0.005447] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff811ef]
<6>[    0.005447] ACPI: Reserving DBGP table memory at [mem 0x6ff80000-0x6ff80033]
<6>[    0.005448] ACPI: Reserving DBG2 table memory at [mem 0x6ff7f000-0x6ff7f053]
<6>[    0.005448] ACPI: Reserving NHLT table memory at [mem 0x6ff7e000-0x6ff7e2e2]
<6>[    0.005448] ACPI: Reserving SSDT table memory at [mem 0x6ff7c000-0x6ff7d15b]
<6>[    0.005449] ACPI: Reserving SSDT table memory at [mem 0x6ff75000-0x6ff7b53a]
<6>[    0.005449] ACPI: Reserving ECDT table memory at [mem 0x6ff74000-0x6ff74068]
<6>[    0.005449] ACPI: Reserving DMAR table memory at [mem 0x6ff73000-0x6ff730d7]
<6>[    0.005449] ACPI: Reserving FPDT table memory at [mem 0x6ff72000-0x6ff72043]
<6>[    0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ffa8000-0x6ffa886c]
<6>[    0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ff6f000-0x6ff703da]
<6>[    0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ff6c000-0x6ff6e462]
<6>[    0.005451] ACPI: Reserving SDEV table memory at [mem 0x6ff6b000-0x6ff6b045]
<6>[    0.005451] ACPI: Reserving SSDT table memory at [mem 0x6ff60000-0x6ff6a4f9]
<6>[    0.005451] ACPI: Reserving PHAT table memory at [mem 0x6ff5f000-0x6ff5f7bf]
<6>[    0.005451] ACPI: Reserving BGRT table memory at [mem 0x6ff5e000-0x6ff5e037]
<6>[    0.005520] APIC: Switched APIC routing to: cluster x2apic
<6>[    0.005729] No NUMA configuration found
<6>[    0.005729] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[    0.005735] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[    0.005846] Zone ranges:
<6>[    0.005847]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.005848]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.005848]   Normal   [mem 0x0000000100000000-0x000000087f7fffff]
<6>[    0.005849]   Device   empty
<6>[    0.005850] Movable zone start for each node
<6>[    0.005850] Early memory node ranges
<6>[    0.005851]   node   0: [mem 0x0000000000001000-0x000000000009efff]
<6>[    0.005851]   node   0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[    0.005852]   node   0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[    0.005852]   node   0: [mem 0x0000000104500000-0x000000087f7fffff]
<6>[    0.005853] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[    0.005858] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[    0.005875] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[    0.007893] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[    0.036382] On node 0, zone Normal: 17664 pages in unavailable ranges
<6>[    0.036447] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[    0.036911] ACPI: PM-Timer IO Port: 0x1808
<6>[    0.036916] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[    0.036965] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[    0.036967] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.036968] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[    0.036970] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[    0.036971] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[    0.036982] e820: update [mem 0x68f52000-0x68f6cfff] usable ==> reserved
<6>[    0.036988] TSC deadline timer available
<6>[    0.036990] CPU topo: Max. logical packages:   1
<6>[    0.036991] CPU topo: Max. logical dies:       1
<6>[    0.036991] CPU topo: Max. dies per package:   1
<6>[    0.036992] CPU topo: Max. threads per core:   1
<6>[    0.036993] CPU topo: Num. cores per package:     8
<6>[    0.036993] CPU topo: Num. threads per package:   8
<6>[    0.036993] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[    0.037005] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.037006] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[    0.037007] PM: hibernation: Registered nosave memory: [mem 0x68f52000-0x68f6cfff]
<6>[    0.037008] PM: hibernation: Registered nosave memory: [mem 0x68f71000-0x68f71fff]
<6>[    0.037009] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[    0.037009] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[    0.037009] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[    0.037010] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[    0.037011] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[    0.037011] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[    0.037011] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[    0.037011] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1044fffff]
<6>[    0.037013] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[    0.037014] Booting paravirtualized kernel on bare hardware
<6>[    0.037016] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[    0.037024] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[    0.037354] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[    0.037358] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[    0.037359] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
<5>[    0.037372] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[    0.037447] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[    0.037462] random: crng init done
<6>[    0.039310] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[    0.040233] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[    0.040288] Fallback order for Node 0: 0 
<6>[    0.040291] Built 1 zonelists, mobility grouping on.  Total pages: 8289632
<6>[    0.040292] Policy zone: Normal
<6>[    0.040301] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[    0.040302] stackdepot: allocating hash table via alloc_large_system_hash
<6>[    0.040303] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[    0.041243] software IO TLB: area num 8.
<4>[    0.087328] **********************************************************
<4>[    0.087329] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.087329] **                                                      **
<4>[    0.087329] ** This system shows unhashed kernel memory addresses   **
<4>[    0.087330] ** via the console, logs, and other interfaces. This    **
<4>[    0.087330] ** might reduce the security of your system.            **
<4>[    0.087330] **                                                      **
<4>[    0.087330] ** If you see this message and you are not debugging    **
<4>[    0.087331] ** the kernel, report this immediately to your system   **
<4>[    0.087331] ** administrator!                                       **
<4>[    0.087331] **                                                      **
<4>[    0.087331] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.087331] **********************************************************
<6>[    0.088399] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[    0.088732] ftrace: allocating 59560 entries in 233 pages
<6>[    0.113966] ftrace: allocated 233 pages with 5 groups
<6>[    0.115202] Dynamic Preempt: voluntary
<6>[    0.115640] Running RCU self tests
<6>[    0.115640] Running RCU synchronous self tests
<6>[    0.115641] rcu: Preemptible hierarchical RCU implementation.
<6>[    0.115641] rcu: 	RCU lockdep checking is enabled.
<6>[    0.115641] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[    0.115642] 	Trampoline variant of Tasks RCU enabled.
<6>[    0.115642] 	Rude variant of Tasks RCU enabled.
<6>[    0.115642] 	Tracing variant of Tasks RCU enabled.
<6>[    0.115643] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[    0.115643] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[    0.115682] Running RCU synchronous self tests
<6>[    0.115687] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115690] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115692] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.125726] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[    0.126179] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.126483] Console: colour dummy device 80x25
<6>[    0.126491] printk: legacy console [tty0] enabled
<6>[    0.127685] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[    0.127693] ... MAX_LOCKDEP_SUBCLASSES:  8
<6>[    0.127697] ... MAX_LOCK_DEPTH:          48
<6>[    0.127700] ... MAX_LOCKDEP_KEYS:        8192
<6>[    0.127704] ... CLASSHASH_SIZE:          4096
<6>[    0.127708] ... MAX_LOCKDEP_ENTRIES:     524288
<6>[    0.127712] ... MAX_LOCKDEP_CHAINS:      524288
<6>[    0.127715] ... CHAINHASH_SIZE:          262144
<6>[    0.127719]  memory used by lock dependency info: 54145 kB
<6>[    0.127723]  memory used for stack traces: 4224 kB
<6>[    0.127727]  per task-struct memory footprint: 1920 bytes
<6>[    0.127780] ACPI: Core revision 20240827
<6>[    0.128655] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[    0.128718] APIC: Switch to symmetric I/O mode setup
<6>[    0.128723] DMAR: Host address width 38
<6>[    0.128727] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[    0.128758] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128789] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[    0.128812] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128838] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[    0.128858] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[    0.128889] DMAR: SATC flags: 0x1
<6>[    0.128897] DMAR-IR: IOAPIC id 2 under DRHD base  0xfc820000 IOMMU 2
<6>[    0.128902] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[    0.128906] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[    0.130741] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[    0.135633] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[    0.135652] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[    0.135725] CPU0: Thermal monitoring enabled (TM1)
<6>[    0.135732] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[    0.135908] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[    0.135913] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[    0.135923] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[    0.135932] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[    0.135937] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[    0.135945] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[    0.135952] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[    0.135969] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[    0.135975] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[    0.135981] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[    0.135986] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[    0.135992] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[    0.135998] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
<6>[    0.136003] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
<6>[    0.136008] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
<6>[    0.136013] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[    0.136646] Freeing SMP alternatives memory: 48K
<6>[    0.136646] pid_max: default: 32768 minimum: 301
<6>[    0.136646] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[    0.136646] landlock: Up and running.
<6>[    0.136646] Yama: becoming mindful.
<6>[    0.136646] AppArmor: AppArmor initialized
<6>[    0.136646] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136646] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136646] Running RCU synchronous self tests
<6>[    0.136646] Running RCU synchronous self tests
<6>[    0.136646] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[    0.136646] Running RCU Tasks wait API self tests
<6>[    0.136646] Running RCU Tasks Rude wait API self tests
<6>[    0.136646] Running RCU Tasks Trace wait API self tests
<6>[    0.136646] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[    0.136646] core: cpu_core PMU driver: 
<6>[    0.136651] ... version:                6
<6>[    0.136655] ... bit width:              48
<6>[    0.136658] ... generic registers:      10
<6>[    0.136662] ... value mask:             0000ffffffffffff
<6>[    0.136666] ... max period:             00007fffffffffff
<6>[    0.136670] ... fixed-purpose events:   4
<6>[    0.136674] ... event mask:             0001000f000003ff
<6>[    0.136705] signal: max sigframe size: 3632
<6>[    0.136726] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[    0.136813] rcu: Hierarchical SRCU implementation.
<6>[    0.136817] rcu: 	Max phase no-delay instances is 400.
<6>[    0.136953] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[    0.138748] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[    0.138999] smp: Bringing up secondary CPUs ...
<6>[    0.139345] smpboot: x86: Booting SMP configuration:
<6>[    0.139352] .... node  #0, CPUs:      #1 #2 #3
<6>[    0.142796] Callback from call_rcu_tasks_trace() invoked.
<4>[    0.146111]  #4 #5 #6 #7
<6>[    0.010306] core: cpu_atom PMU driver: 
<6>[    0.010306] ... version:                6
<6>[    0.010306] ... bit width:              48
<6>[    0.010306] ... generic registers:      8
<6>[    0.010306] ... value mask:             0000ffffffffffff
<6>[    0.010306] ... max period:             00007fffffffffff
<6>[    0.010306] ... fixed-purpose events:   6
<6>[    0.010306] ... event mask:             00000077000000ff
<6>[    0.155769] smp: Brought up 1 node, 8 CPUs
<6>[    0.156666] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[    0.158721] Memory: 32360136K/33158528K available (24294K kernel code, 5580K rwdata, 9276K rodata, 5624K init, 68408K bss, 775236K reserved, 0K cma-reserved)
<6>[    0.159152] devtmpfs: initialized
<6>[    0.159745] x86/mm: Memory block size: 128MB
<6>[    0.175224] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[    0.176041] Running RCU synchronous self tests
<6>[    0.176053] Running RCU synchronous self tests
<6>[    0.176070] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.176070] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[    0.176070] pinctrl core: initialized pinctrl subsystem
<6>[    0.177004] PM: RTC time: 11:52:43, date: 2025-03-18
<6>[    0.177848] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.178898] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.179201] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.179480] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.179539] audit: initializing netlink subsys (disabled)
<5>[    0.179719] audit: type=2000 audit(1742298763.044:1): state=initialized audit_enabled=0 res=1
<6>[    0.180321] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.180323] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.180330] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.180334] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.180338] thermal_sys: Registered thermal governor 'power_allocator'
<6>[    0.180381] EISA bus registered
<6>[    0.180692] cpuidle: using governor ladder
<6>[    0.180708] cpuidle: using governor menu
<6>[    0.180751] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    0.181117] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[    0.181143] PCI: Using configuration type 1 for base access
<6>[    0.181687] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[    0.182817] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[    0.182817] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[    0.182817] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[    0.182817] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[    0.201647] raid6: avx2x4   gen() 77433 MB/s
<6>[    0.218648] raid6: avx2x2   gen() 82759 MB/s
<6>[    0.235648] raid6: avx2x1   gen() 71274 MB/s
<6>[    0.235652] raid6: using algorithm avx2x2 gen() 82759 MB/s
<6>[    0.252648] raid6: .... xor() 57435 MB/s, rmw enabled
<6>[    0.252652] raid6: using avx2x2 recovery algorithm
<6>[    0.255885] fbcon: Taking over console
<6>[    0.257107] ACPI: Added _OSI(Module Device)
<6>[    0.257158] ACPI: Added _OSI(Processor Device)
<6>[    0.257202] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.257247] ACPI: Added _OSI(Processor Aggregator Device)
<6>[    0.645393] ACPI: 32 ACPI AML tables successfully acquired and loaded
<6>[    0.658968] ACPI: EC: EC started
<6>[    0.658980] ACPI: EC: interrupt blocked
<6>[    0.661815] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[    0.661821] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[    0.675679] Callback from call_rcu_tasks() invoked.
<6>[    0.919025] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    0.919039] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    0.944788] ACPI: Interpreter enabled
<6>[    0.944881] ACPI: PM: (supports S0 S4 S5)
<6>[    0.944886] ACPI: Using IOAPIC for interrupt routing
<6>[    0.950334] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    0.950342] PCI: Ignoring E820 reservations for host bridge windows
<6>[    0.968890] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[    0.968940] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[    1.008617] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[    1.008895] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[    1.011569] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[    1.212561] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[    1.225101] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[    1.384160] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[    1.385699] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[    1.393999] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[    1.403096] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[    1.403337] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[    1.403570] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[    1.515361] ACPI: \: Can't tag data node
<3>[    1.517987] ACPI: \: Can't tag data node
<3>[    1.520992] ACPI: \: Can't tag data node
<3>[    1.523606] ACPI: \: Can't tag data node
<3>[    1.526169] ACPI: \: Can't tag data node
<6>[    1.715056] ACPI: \_TZ_.FN00: New power resource
<6>[    1.716221] ACPI: \_TZ_.FN01: New power resource
<6>[    1.717348] ACPI: \_TZ_.FN02: New power resource
<6>[    1.718514] ACPI: \_TZ_.FN03: New power resource
<6>[    1.719734] ACPI: \_TZ_.FN04: New power resource
<6>[    1.722999] ACPI: \PIN_: New power resource
<6>[    1.730807] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[    1.730839] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[    1.738421] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[    1.750753] PCI host bridge to bus 0000:00
<6>[    1.750791] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    1.750800] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    1.750808] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    1.750816] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[    1.750825] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[    1.750835] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[    1.754230] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[    1.754795] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[    1.754887] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[    1.754895] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[    1.754904] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[    1.754948] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[    1.756143] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[    1.756173] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[    1.757442] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[    1.757472] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[    1.757480] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[    1.758287] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[    1.758334] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    1.758346] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[    1.758364] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[    1.758485] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[    1.758546] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[    1.762658] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[    1.762701] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    1.762713] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[    1.762731] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[    1.762847] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[    1.762903] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[    1.766984] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[    1.767035] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    1.767046] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[    1.767065] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[    1.767185] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[    1.767234] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[    1.771402] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[    1.771439] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[    1.771453] pci 0000:00:0a.0: enabling Extended Tags
<6>[    1.771648] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[    1.771677] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[    1.771684] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[    1.772064] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    1.772117] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[    1.772188] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[    1.773991] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    1.774044] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[    1.774052] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[    1.774110] pci 0000:00:0d.2: supports D1 D2
<6>[    1.774114] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    1.775273] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    1.775325] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[    1.775333] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[    1.775391] pci 0000:00:0d.3: supports D1 D2
<6>[    1.775395] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    1.776603] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[    1.776690] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[    1.777151] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[    1.779495] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[    1.779591] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[    1.779701] pci 0000:00:13.0: PME# supported from D3hot
<6>[    1.780079] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    1.780132] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[    1.780199] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[    1.782147] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[    1.782211] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[    1.782220] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[    1.782508] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    1.782618] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    1.784000] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    1.784107] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    1.785736] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    1.785837] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    1.787126] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    1.787236] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    1.788465] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[    1.788555] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[    1.788679] pci 0000:00:16.0: PME# supported from D3hot
<6>[    1.791324] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[    1.791358] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    1.791366] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[    1.791373] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[    1.791496] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    1.791552] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[    1.795952] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[    1.796058] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    1.796089] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[    1.796426] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[    1.796587] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[    1.801429] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[    1.803344] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[    1.803460] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[    1.803474] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[    1.803585] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[    1.803971] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[    1.804039] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[    1.804051] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
<6>[    1.805154] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    1.805338] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[    1.805557] pci 0000:00:1f.6: [8086:550f] type 00 class 0x020000 conventional PCI endpoint
<6>[    1.805642] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[    1.805730] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[    1.809674] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    1.810048] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    1.810394] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    1.810804] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[    1.810920] pci 0000:7f:00.0: BAR 0 [io  0x3000-0x30ff]
<6>[    1.810940] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[    1.810959] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[    1.811230] pci 0000:7f:00.0: supports D1 D2
<6>[    1.811240] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    1.812505] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    1.815058] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    1.816071] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[    1.816172] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[    1.819111] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    1.819229] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.272943] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[   11.985770] Low-power S0 idle used by default for system suspend
<6>[   12.037654] ACPI: EC: interrupt unblocked
<6>[   12.037665] ACPI: EC: event unblocked
<6>[   12.037699] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[   12.037705] ACPI: EC: GPE=0x6e
<6>[   12.037711] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[   12.037720] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[   12.038838] iommu: Default domain type: Translated
<6>[   12.038844] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[   12.039954] SCSI subsystem initialized
<7>[   12.039992] libata version 3.00 loaded.
<6>[   12.039992] ACPI: bus type USB registered
<6>[   12.039992] usbcore: registered new interface driver usbfs
<6>[   12.039992] usbcore: registered new interface driver hub
<6>[   12.039992] usbcore: registered new device driver usb
<6>[   12.040974] pps_core: LinuxPPS API ver. 1 registered
<6>[   12.040979] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[   12.040996] PTP clock support registered
<6>[   12.041058] EDAC MC: Ver: 3.0.0
<6>[   12.043742] efivars: Registered efivars operations
<6>[   12.045759] NetLabel: Initializing
<6>[   12.045763] NetLabel:  domain hash size = 128
<6>[   12.045766] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
<6>[   12.045833] NetLabel:  unlabeled traffic allowed by default
<6>[   12.045846] mctp: management component transport protocol core
<6>[   12.045851] NET: Registered PF_MCTP protocol family
<6>[   12.045885] PCI: Using ACPI for IRQ routing
<7>[   12.094907] PCI: pci_cache_line_size set to 64 bytes
<6>[   12.095232] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[   12.095438] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[   12.095460] e820: reserve RAM buffer [mem 0x68f52000-0x6bffffff]
<7>[   12.095467] e820: reserve RAM buffer [mem 0x68f71000-0x6bffffff]
<7>[   12.095473] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[   12.095480] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[   12.096673] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[   12.096696] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[   12.096707] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[   12.096738] vgaarb: loaded
<6>[   12.098035] clocksource: Switched to clocksource tsc-early
<5>[   12.109385] VFS: Disk quotas dquot_6.6.0
<6>[   12.109429] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[   12.111205] AppArmor: AppArmor Filesystem Enabled
<6>[   12.111559] pnp: PnP ACPI init
<6>[   12.113359] system 00:00: [io  0x0680-0x069f] has been reserved
<6>[   12.113385] system 00:00: [io  0x164e-0x164f] has been reserved
<6>[   12.116605] system 00:02: [io  0x06a4] has been reserved
<6>[   12.116627] system 00:02: [io  0x06a0] has been reserved
<6>[   12.165537] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[   12.165564] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[   12.165593] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[   12.165614] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[   12.165638] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[   12.165661] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[   12.165685] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[   12.165705] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[   12.173355] system 00:04: [io  0x2000-0x20fe] has been reserved
<6>[   12.179401] system 00:06: [io  0x1854-0x1857] has been reserved
<6>[   12.179730] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[   12.190895] pnp: PnP ACPI: found 8 devices
<6>[   12.213960] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[   12.214460] NET: Registered PF_INET protocol family
<6>[   12.214738] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   12.218753] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[   12.219032] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[   12.219285] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   12.220257] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[   12.221838] TCP: Hash tables configured (established 262144 bind 65536)
<6>[   12.222392] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   12.223217] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   12.223926] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[   12.223995] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[   12.224007] pci 0000:00:07.1: bridge window [io  0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[   12.224017] pci 0000:00:07.2: bridge window [io  0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[   12.224057] pci 0000:00:07.0: bridge window [io  0x4000-0x4fff]: assigned
<6>[   12.224063] pci 0000:00:07.1: bridge window [io  0x5000-0x5fff]: assigned
<6>[   12.224068] pci 0000:00:07.2: bridge window [io  0x6000-0x6fff]: assigned
<6>[   12.224074] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[   12.224124] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[   12.224170] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[   12.224216] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[   12.224264] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[   12.224294] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[   12.224305] pci 0000:00:07.0:   bridge window [io  0x4000-0x4fff]
<6>[   12.224323] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[   12.224331] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   12.224350] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[   12.224355] pci 0000:00:07.1:   bridge window [io  0x5000-0x5fff]
<6>[   12.224364] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[   12.224372] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   12.224384] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[   12.224389] pci 0000:00:07.2:   bridge window [io  0x6000-0x6fff]
<6>[   12.224398] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[   12.224406] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   12.224418] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[   12.224423] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[   12.224431] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[   12.224444] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[   12.224480] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[   12.224515] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<6>[   12.224520] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<6>[   12.224525] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[   12.224530] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[   12.224534] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[   12.224540] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
<6>[   12.224544] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[   12.224549] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   12.224554] pci_bus 0000:2b: resource 0 [io  0x5000-0x5fff]
<6>[   12.224559] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[   12.224563] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   12.224569] pci_bus 0000:55: resource 0 [io  0x6000-0x6fff]
<6>[   12.224573] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[   12.224578] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   12.224583] pci_bus 0000:7f: resource 0 [io  0x3000-0x3fff]
<6>[   12.224588] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[   12.224593] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[   12.225479] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[   12.226885] PCI: CLS 0 bytes, default 64
<6>[   12.226985] DMAR: No RMRR found
<6>[   12.226999] DMAR: No ATSR found
<6>[   12.227003] DMAR: dmar1: Using Queued invalidation
<6>[   12.227065] DMAR: dmar0: Using Queued invalidation
<6>[   12.227073] DMAR: dmar2: Using Queued invalidation
<6>[   12.228040] pci 0000:00:04.0: Adding to iommu group 0
<6>[   12.228107] pci 0000:00:05.0: Adding to iommu group 1
<6>[   12.228166] pci 0000:00:0a.0: Adding to iommu group 2
<6>[   12.228215] pci 0000:00:0b.0: Adding to iommu group 3
<6>[   12.231030] pci 0000:00:02.0: Adding to iommu group 4
<6>[   12.232179] pci 0000:00:00.0: Adding to iommu group 5
<6>[   12.232234] pci 0000:00:07.0: Adding to iommu group 6
<6>[   12.232291] pci 0000:00:07.1: Adding to iommu group 7
<6>[   12.232351] pci 0000:00:07.2: Adding to iommu group 8
<6>[   12.232418] pci 0000:00:0d.0: Adding to iommu group 9
<6>[   12.232475] pci 0000:00:0d.2: Adding to iommu group 9
<6>[   12.232849] pci 0000:00:0d.3: Adding to iommu group 9
<6>[   12.233249] pci 0000:00:12.0: Adding to iommu group 10
<6>[   12.233302] pci 0000:00:13.0: Adding to iommu group 11
<6>[   12.233371] pci 0000:00:14.0: Adding to iommu group 12
<6>[   12.233405] pci 0000:00:14.2: Adding to iommu group 12
<6>[   12.233482] pci 0000:00:15.0: Adding to iommu group 13
<6>[   12.233517] pci 0000:00:15.1: Adding to iommu group 13
<6>[   12.233553] pci 0000:00:15.2: Adding to iommu group 13
<6>[   12.233590] pci 0000:00:15.3: Adding to iommu group 13
<6>[   12.233640] pci 0000:00:16.0: Adding to iommu group 14
<6>[   12.233688] pci 0000:00:1c.0: Adding to iommu group 15
<6>[   12.233758] pci 0000:00:1c.4: Adding to iommu group 16
<6>[   12.233840] pci 0000:00:1f.0: Adding to iommu group 17
<6>[   12.233876] pci 0000:00:1f.3: Adding to iommu group 17
<6>[   12.233916] pci 0000:00:1f.4: Adding to iommu group 17
<6>[   12.233956] pci 0000:00:1f.5: Adding to iommu group 17
<6>[   12.233993] pci 0000:00:1f.6: Adding to iommu group 17
<6>[   12.234042] pci 0000:7f:00.0: Adding to iommu group 18
<6>[   12.234117] pci 0000:80:00.0: Adding to iommu group 19
<6>[   12.242260] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[   12.242268] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[   12.242273] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[   12.247249] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[   12.247491] clocksource: Switched to clocksource tsc
<6>[   12.248216] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[   12.257760] Initialise system trusted keyrings
<5>[   12.257888] Key type blacklist registered
<6>[   12.258267] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[   12.273437] zbud: loaded
<6>[   12.275315] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[   12.275494] ntfs3: Enabled Linux POSIX ACLs support
<6>[   12.275505] ntfs3: Read-only LZX/Xpress compression included
<5>[   12.276080] integrity: Platform Keyring initialized
<5>[   12.276110] integrity: Machine keyring initialized
<6>[   12.286757] xor: automatically using best checksumming function   avx       
<5>[   12.286773] Key type asymmetric registered
<5>[   12.286792] Asymmetric key parser 'x509' registered
<6>[   12.286968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[   12.287566] io scheduler mq-deadline registered
<6>[   12.289570] ledtrig-cpu: registered to indicate activity on CPUs
<6>[   12.291970] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[   12.292656] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[   12.294577] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[   12.295213] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[   12.297129] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[   12.297730] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[   12.299499] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[   12.300100] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[   12.307220] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[   12.307974] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[   12.308901] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[   12.312796] Monitor-Mwait will be used to enter C-1 state
<7>[   12.312925] Monitor-Mwait will be used to enter C-2 state
<7>[   12.312973] Monitor-Mwait will be used to enter C-3 state
<6>[   12.324592] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[   12.325709] ACPI: button: Lid Switch [LID0]
<6>[   12.326616] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[   12.326875] ACPI: button: Sleep Button [SLPB]
<6>[   12.327201] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[   12.328068] ACPI: button: Power Button [PWRB]
<6>[   12.480239] thermal LNXTHERM:00: registered as thermal_zone0
<6>[   12.480249] ACPI: thermal: Thermal Zone [TZ00] (54 C)
<6>[   12.482860] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[   12.483035] ACPI: battery: Slot [BAT1] (battery absent)
<6>[   12.484791] ACPI: battery: Slot [BAT0] (battery present)
<6>[   12.507708] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[   12.540275] serial 0000:00:12.0: enabling device (0000 -> 0002)
<4>[   12.545292] hpet_acpi_add: no address or irqs in _CRS
<6>[   12.545492] Linux agpgart interface v0.103
<6>[   12.579023] ACPI: bus type drm_connector registered
<6>[   12.605328] loop: module loaded
<6>[   12.651389] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[   12.835369] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[   12.983398] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[   13.108442] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[   13.226836] Key type psk registered
<6>[   13.228662] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[   13.229558] tun: Universal TUN/TAP device driver, 1.6
<6>[   13.229904] nvme nvme0: pci function 0000:80:00.0
<6>[   13.231322] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   13.231446] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[   13.233379] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   13.236362] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   13.236394] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[   13.236425] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   13.238126] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   13.238156] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.238167] usb usb1: Product: xHCI Host Controller
<6>[   13.238175] usb usb1: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   13.238183] usb usb1: SerialNumber: 0000:00:0d.0
<6>[   13.239338] hub 1-0:1.0: USB hub found
<6>[   13.239418] hub 1-0:1.0: 1 port detected
<6>[   13.243119] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   13.243136] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.243147] usb usb2: Product: xHCI Host Controller
<6>[   13.243154] usb usb2: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   13.243162] usb usb2: SerialNumber: 0000:00:0d.0
<6>[   13.244452] hub 2-0:1.0: USB hub found
<6>[   13.244497] hub 2-0:1.0: 3 ports detected
<6>[   13.265793] nvme nvme0: 8/0/0 default/read/poll queues
<6>[   13.268950] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   13.268995] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[   13.272249] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   13.274881] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   13.274920] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[   13.274950] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   13.275317] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   13.275337] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.275351]  nvme0n1: p1 p2
<6>[   13.275362] usb usb3: Product: xHCI Host Controller
<6>[   13.275375] usb usb3: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   13.275389] usb usb3: SerialNumber: 0000:00:14.0
<6>[   13.276435] hub 3-0:1.0: USB hub found
<6>[   13.276508] hub 3-0:1.0: 8 ports detected
<6>[   13.319805] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   13.319831] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.319841] usb usb4: Product: xHCI Host Controller
<6>[   13.319849] usb usb4: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   13.319858] usb usb4: SerialNumber: 0000:00:14.0
<6>[   13.320609] hub 4-0:1.0: USB hub found
<6>[   13.320664] hub 4-0:1.0: 2 ports detected
<6>[   13.328400] usbcore: registered new interface driver usb-storage
<6>[   13.328535] usbcore: registered new interface driver usbserial_generic
<6>[   13.328634] usbserial: USB Serial support registered for generic
<6>[   13.328687] usbcore: registered new interface driver ftdi_sio
<6>[   13.328720] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[   13.328772] usbcore: registered new interface driver pl2303
<6>[   13.328812] usbserial: USB Serial support registered for pl2303
<6>[   13.328926] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[   13.328936] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[   14.039440] i8042: Can't read CTR while initializing i8042
<3>[   14.039452] i8042 i8042: probe with driver i8042 failed with error -5
<6>[   14.039925] mousedev: PS/2 mouse device common for all mice
<6>[   14.040891] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[   14.042723] rtc_cmos rtc_cmos: registered as rtc0
<6>[   14.042943] rtc_cmos rtc_cmos: setting system clock to 2025-03-18T11:52:57 UTC (1742298777)
<6>[   14.043118] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[   14.043172] i2c_dev: i2c /dev entries driver
<6>[   14.047430] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[   14.047448] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[   14.047459] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[   14.047501] device-mapper: uevent: version 1.0.3
<6>[   14.047805] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[   14.047938] platform eisa.0: Probing EISA bus 0
<4>[   14.047952] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[   14.047967] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[   14.047979] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[   14.047991] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[   14.048002] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[   14.048013] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[   14.048025] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[   14.048036] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[   14.048047] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[   14.048057] platform eisa.0: EISA: Detected 0 cards
<6>[   14.048067] intel_pstate: Intel P-state driver initializing
<6>[   14.051762] Hybrid CPU capacity scaling enabled
<6>[   14.053374] intel_pstate: HWP enabled
<6>[   14.053384] sdhci: Secure Digital Host Controller Interface driver
<6>[   14.053393] sdhci: Copyright(c) Pierre Ossman
<6>[   14.053533] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[   14.056128] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[   14.057180] drop_monitor: Initializing network drop monitor service
<6>[   14.057725] NET: Registered PF_INET6 protocol family
<6>[   14.061105] Segment Routing with IPv6
<6>[   14.061175] In-situ OAM (IOAM) with IPv6
<6>[   14.061236] NET: Registered PF_PACKET protocol family
<5>[   14.061563] Key type dns_resolver registered
<4>[   14.065535] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[   14.066088] microcode: Current revision: 0x0000011c
<6>[   14.066695] IPI shorthand broadcast: enabled
<6>[   14.084471] sched_clock: Marking stable (14075000695, 9306076)->(14146363322, -62056551)
<6>[   14.085145] registered taskstats version 1
<5>[   14.086731] Loading compiled-in X.509 certificates
<6>[   14.113690] Demotion targets for Node 0: null
<6>[   14.113934] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[   14.113937] kmemleak: Automatic memory scanning thread started
<5>[   14.114158] Key type .fscrypt registered
<5>[   14.114163] Key type fscrypt-provisioning registered
<6>[   14.116761] Btrfs loaded, zoned=yes, fsverity=yes
<5>[   14.116900] Key type trusted registered
<5>[   14.118957] Key type encrypted registered
<6>[   14.118967] AppArmor: AppArmor sha256 policy hashing enabled
<5>[   14.119055] Loading compiled-in module X.509 certificates
<5>[   14.119870] Loaded X.509 cert 'Build time autogenerated kernel key: 3d9a6cf531f8595078217ee9ab9d8d470854b8d4'
<6>[   14.119886] ima: Allocated hash algorithm: sha256
<6>[   14.138029] ima: No architecture policies found
<6>[   14.138258] evm: Initialising EVM extended attributes:
<6>[   14.138269] evm: security.selinux
<6>[   14.138276] evm: security.SMACK64
<6>[   14.138283] evm: security.SMACK64EXEC
<6>[   14.138290] evm: security.SMACK64TRANSMUTE
<6>[   14.138299] evm: security.SMACK64MMAP
<6>[   14.138315] evm: security.apparmor
<6>[   14.138323] evm: security.ima
<6>[   14.138330] evm: security.capability
<6>[   14.138338] evm: HMAC attrs: 0x1
<6>[   14.142948] PM:   Magic number: 1:838:883
<6>[   14.143284] printk: legacy console [netcon0] enabled
<6>[   14.143300] netconsole: network logging started
<6>[   14.144451] RAS: Correctable Errors collector initialized.
<6>[   14.145498] clk: Disabling unused clocks
<6>[   14.145529] PM: genpd: Disabling unused power domains
<6>[   14.146512] md: Waiting for all devices to be available before autodetect
<6>[   14.146528] md: If you don't use raid, use raid=noautodetect
<6>[   14.146541] md: Autodetecting RAID arrays.
<6>[   14.146560] md: autorun ...
<6>[   14.146568] md: ... autorun DONE.
<6>[   14.202069] EXT4-fs (nvme0n1p2): mounted filesystem 9a25468b-c3fd-45e2-b59f-4eab10a53c55 ro with ordered data mode. Quota mode: none.
<6>[   14.202147] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[   14.202905] devtmpfs: mounted
<6>[   14.214535] Freeing unused decrypted memory: 2028K
<6>[   14.215412] Freeing unused kernel image (initmem) memory: 5624K
<6>[   14.215434] Write protecting the kernel read-only data: 34816k
<6>[   14.215803] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[   14.216064] Freeing unused kernel image (rodata/data gap) memory: 964K
<6>[   14.220981] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[   14.221007] Run /sbin/init as init process
<7>[   14.221012]   with arguments:
<7>[   14.221013]     /sbin/init
<7>[   14.221014]   with environment:
<7>[   14.221014]     HOME=/
<7>[   14.221015]     TERM=linux
<7>[   14.221016]     BOOT_IMAGE=/boot/drm_intel
<7>[   14.267487] systemd[1]: Inserted module 'autofs4'
<7>[   14.286251] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[   14.286292] systemd[1]: Detected architecture x86-64.
<7>[   14.287803] systemd[1]: Hostname set to <shard-lnl-8>.
<7>[   14.545765] systemd[1]: Queued start job for default target graphical.target.
<7>[   14.592400] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[   14.596955] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[   14.599653] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[   14.600084] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[   14.601086] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[   14.601258] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA9\x2dCAA8.device - /dev/disk/by-uuid/BBA9-CAA8...
<7>[   14.601388] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[   14.601506] systemd[1]: Reached target slices.target - Slice Units.
<7>[   14.601609] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[   14.601722] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[   14.601827] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[   14.602170] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[   14.602661] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[   14.602998] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[   14.603358] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[   14.603643] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[   14.603851] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[   14.604141] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[   14.604537] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[   14.604804] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[   14.604972] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   14.605236] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[   14.605494] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[   14.608517] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[   14.610938] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[   14.613463] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[   14.616150] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[   14.621596] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[   14.624878] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[   14.628182] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[   14.631838] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[   14.636018] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[   14.638765] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[   14.641723] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[   14.645696] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[   14.650427] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[   14.654849] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[   14.659803] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[   14.660127] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[   14.660667] systemd-journald[212]: Collecting audit messages is disabled.
<7>[   14.665187] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[   14.667693] pstore: Using crash dump compression: deflate
<6>[   14.668447] pstore: Registered efi_pstore as persistent store backend
<7>[   14.670617] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[   14.670725] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   14.670795] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   14.676160] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[   14.681002] fuse: init (API version 7.42)
<7>[   14.697175] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[   14.866896] EXT4-fs (nvme0n1p2): re-mounted 9a25468b-c3fd-45e2-b59f-4eab10a53c55 r/w. Quota mode: none.
<6>[   14.900244] Adding 8388604k swap on /swap.img.  Priority:-2 extents:66 across:274595840k SS
<7>[   14.918629] systemd-journald[212]: Received client request to flush runtime journal.
<7>[   14.937768] systemd-journald[212]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[   14.937786] systemd-journald[212]: Rotating system journal.
<4>[   15.614885] nvme nvme0: using unchecked data buffer
<6>[   15.678829] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[   15.689832] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.689857] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.689881] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.689906] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.689931] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.689955] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.689980] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690004] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690029] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690054] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690078] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690103] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690127] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690152] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690177] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690201] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690226] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690262] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690286] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690317] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690336] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690361] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690385] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690410] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690435] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690463] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690483] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690526] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690547] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690571] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690596] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690620] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690661] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690681] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690705] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690730] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690755] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.690779] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727107] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727132] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727156] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727181] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727205] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727230] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727266] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727291] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727467] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727509] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727534] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727564] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727631] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727655] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727680] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727708] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727733] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727753] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727778] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727802] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727827] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727852] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727876] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727901] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727925] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727939] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727952] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727964] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.727977] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.728000] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   15.731116] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[   15.746106] intel-hid INTC107B:00: platform supports 5 button array
<4>[   15.753049] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753073] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753093] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753113] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753133] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753153] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753173] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753243] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753264] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753284] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753304] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753502] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753520] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753540] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753560] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753580] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753600] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753620] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753664] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753684] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753703] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753723] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753761] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753781] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753801] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753834] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753854] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753874] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753894] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753916] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753936] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753955] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753975] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.753995] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.754015] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.754035] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.754055] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.754075] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.754095] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   15.756440] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[   15.781548] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.781573] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   15.800224] pci 0000:00:05.0: Setting to D3hot
<6>[   15.811367] pci 0000:00:0b.0: Setting to D3hot
<4>[   15.818266] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818292] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818417] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818435] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818454] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818475] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818494] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818514] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818534] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818590] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818611] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818656] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818676] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818710] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818729] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818749] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818769] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818803] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818825] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818845] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818865] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818887] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818906] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818926] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818946] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.818992] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819028] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819049] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819068] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819103] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819123] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819143] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819163] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819182] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819202] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819222] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819243] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819262] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819282] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819302] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819327] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819342] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819362] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819382] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.819402] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   15.823391] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[   15.823643] intel_pmc_core INT33A1:00:  initialized
<3>[   15.833093] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[   15.847497] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<5>[   15.990900] audit: type=1400 audit(1742298779.446:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=442 comm="apparmor_parser"
<5>[   15.991528] audit: type=1400 audit(1742298779.446:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=438 comm="apparmor_parser"
<5>[   15.992256] audit: type=1400 audit(1742298779.447:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=445 comm="apparmor_parser"
<5>[   15.992754] audit: type=1400 audit(1742298779.448:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=444 comm="apparmor_parser"
<5>[   15.993039] audit: type=1400 audit(1742298779.448:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=439 comm="apparmor_parser"
<5>[   15.993368] audit: type=1400 audit(1742298779.449:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=446 comm="apparmor_parser"
<5>[   15.993689] audit: type=1400 audit(1742298779.449:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=440 comm="apparmor_parser"
<5>[   15.993988] audit: type=1400 audit(1742298779.449:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=443 comm="apparmor_parser"
<5>[   15.999694] audit: type=1400 audit(1742298779.455:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=450 comm="apparmor_parser"
<5>[   16.000178] audit: type=1400 audit(1742298779.455:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=451 comm="apparmor_parser"
<6>[   16.222533] ACPI: bus type thunderbolt registered
<6>[   16.223853] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[   16.239216] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[   16.239620] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[   16.247890] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[   16.247899] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[   16.254441] e1000e: Intel(R) PRO/1000 Network Driver
<6>[   16.254449] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[   16.262209] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[   16.265657] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[   16.268148] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[   16.274194] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[   16.287284] intel_rapl_common: Found RAPL domain package
<6>[   16.287293] intel_rapl_common: Found RAPL domain dram
<6>[   16.302194] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[   16.326374] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[   16.370973] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[   16.405187] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[   16.446920] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[   16.477982] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[   16.477995] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[   16.477997] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[   16.477998] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[   16.477999] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[   16.490650] cryptd: max_cpu_qlen set to 1000
<6>[   16.568746] AES CTR mode by8 optimization enabled
<6>[   16.585838] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, e4:fa:c4:a4:ee:2f, XID 541, IRQ 180
<6>[   16.585844] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[   16.732976] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<4>[   16.772132] block nvme0n1: No UUID available providing old NGUID
<6>[   16.819223] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:91
<6>[   16.819233] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[   16.819361] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[   16.966207] intel_rapl_common: Found RAPL domain package
<6>[   16.966214] intel_rapl_common: Found RAPL domain core
<6>[   16.966217] intel_rapl_common: Found RAPL domain dram
<6>[   16.966219] intel_rapl_common: Found RAPL domain psys
<6>[   17.023680] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[   17.049539] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[   17.049544] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[   17.049546] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[   17.051217] evm: overlay not supported
<6>[   17.209787] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[   17.335500] loop0: detected capacity change from 0 to 8
<6>[   17.337156] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<4>[   17.343941] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[   17.370804] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[   17.373030] 0x000000000000-0x000002000000 : "BIOS"
<6>[   17.471407] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[   17.632303] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[   17.714017] Consider using thermal netlink events interface
<6>[   18.051502] hid: raw HID events driver (C) Jiri Kosina
<6>[   18.057698] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[   18.092505] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.094567] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.096863] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.097939] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.099890] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.100833] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.106629] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.110634] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.114749] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.117646] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.121005] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.124111] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.010877] typec port0: bound usb3-port1 (ops connector_ops)
<6>[   19.010919] typec port0: bound usb2-port1 (ops connector_ops)
<6>[   20.003243] typec port1: bound usb3-port2 (ops connector_ops)
<6>[   20.003281] typec port1: bound usb2-port2 (ops connector_ops)
<6>[   21.239856] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<4>[   28.785822] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<7>[   36.148491] systemd-journald[212]: /var/log/journal/2b6a2c75c75941a29794878cc3195815/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[   52.093207] [IGT] xe_module_load: executing
<7>[   52.104908] [IGT] xe_module_load: starting subtest load
<5>[   52.300331] Setting dangerous option force_probe - tainting kernel
<6>[   52.303209] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[   52.304800] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[   52.304810] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE  64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[   52.304910] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[   52.304993] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[   52.310321] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[   52.314465] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[   52.314583] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[   52.314666] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[   52.314731] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   52.314795] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[   52.314856] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   52.314916] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   52.314976] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   52.315036] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   52.315095] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   52.315152] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   52.315207] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   52.315261] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   52.315321] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   52.315386] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   52.315507] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[   52.316571] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   52.316669] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   52.321366] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[   52.321491] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000092 [0x49/00]
<7>[   52.321563] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[   52.324332] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   52.325354] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   52.325440] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[   52.325545] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[   52.325623] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,0000007f
<7>[   52.325696] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     000000ff
<7>[   52.325769] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   52.325840] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,000000ff
<6>[   52.326475] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[   52.330438] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[   52.330540] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   52.330624] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[   52.330707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   52.330788] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[   52.330868] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   52.330949] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   52.331028] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   52.331103] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   52.331177] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   52.331250] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   52.331329] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   52.331400] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   52.331470] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[   52.334040] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[   52.337053] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1345
<6>[   52.338055] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[   52.338146] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   52.338257] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[   52.339747] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   52.339907] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[   52.339981] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   52.359364] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   52.359817] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   52.360006] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[   52.360191] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[   52.360428] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,00000000
<7>[   52.360602] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     00000000
<7>[   52.360760] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   52.360931] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,0000000f
<7>[   52.361616] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[   52.361937] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[   52.362222] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6feec018
<7>[   52.362567] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[   52.362876] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[   52.363121] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[   52.363398] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[   52.363627] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[   52.363893] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[   52.364105] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[   52.364437] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[   52.364696] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[   52.364943] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[   52.365196] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[   52.365459] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[   52.365731] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[   52.365961] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[   52.366175] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[   52.366396] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   52.366628] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   52.366831] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[   52.367022] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   52.367237] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   52.367447] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   52.367654] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[   52.367828] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   52.367995] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   52.368151] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   52.368305] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[   52.368474] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   52.368615] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   52.368752] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   52.368903] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[   52.369055] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   52.369186] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   52.369336] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   52.369462] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[   52.369576] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   52.369690] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   52.369802] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   52.369917] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[   52.370443] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[   52.370587] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE      ", BDB version 260
<7>[   52.370716] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[   52.370837] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[   52.370953] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[   52.371065] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[   52.371184] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[   52.371293] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[   52.371409] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[   52.371519] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[   52.371620] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[   52.371716] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[   52.371810] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[   52.371903] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[   52.371996] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[   52.372083] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[   52.372171] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[   52.372264] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[   52.372364] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[   52.372457] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   52.372554] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   52.372649] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   52.372732] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[   52.372809] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[   52.372887] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   52.372960] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   52.373033] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   52.373110] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[   52.373225] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   52.373388] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[   52.373546] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   52.373708] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[   52.373873] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[   52.373999] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[   52.374086] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   52.374174] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   52.374294] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[   52.374406] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[   52.374445] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[   52.374585] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[   52.374703] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[   52.374805] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[   52.375161] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[   52.375322] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[   52.375872] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[   52.375973] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[   52.376061] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[   52.376139] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[   52.376215] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[   52.376288] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[   52.376377] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[   52.376470] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[   52.378748] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[   52.378862] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x8f074 = 0x86fc0
<7>[   52.378965] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[   52.379070] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[   52.379183] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[   52.379292] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[   52.379469] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[   52.379625] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f074 = 0x97fc0
<7>[   52.379779] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   52.379930] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[   52.380077] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   52.380222] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[   52.380381] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   52.380527] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[   52.380674] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[   52.380809] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f474 = 0x9ffc0
<7>[   52.380944] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   52.381076] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[   52.381044] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[   52.381210] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   52.381348] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[   52.381481] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   52.381611] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[   52.381748] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[   52.381874] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f874 = 0x547c0
<7>[   52.382006] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   52.382144] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[   52.382303] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   52.382465] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[   52.382601] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   52.382734] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[   52.383863] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   52.383996] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[   52.384123] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[   52.384333] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[   52.384705] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[   52.384948] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[   52.385104] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[   52.385251] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[   52.385482] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[   52.385651] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[   52.385803] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[   52.385940] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[   52.386074] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[   52.386205] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[   52.387027] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[   52.387277] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   52.387427] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   52.387564] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   52.387701] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   52.387836] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   52.388118] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   52.388442] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   52.390365] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   52.390722] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[   52.393663] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<6>[   52.394035] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[   52.394356] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID  HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[   52.395196] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[   52.396658] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[   52.397197] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[   52.399595] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   52.409130] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   52.409141] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.409142] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.409144] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   52.409146] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.409148] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   52.409153] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.409155] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   52.409157] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.409194] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.409195] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.409196] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.409205] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.409774] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[   52.410332] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[   52.410454] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[   52.410601] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[   52.410737] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[   52.410905] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   52.411011] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   52.411111] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   52.411208] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   52.411303] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   52.411446] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   52.411668] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[   52.411857] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   52.411975] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[   52.412274] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[   52.412423] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   52.412563] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[   52.412778] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[   52.412891] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   52.412998] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[   52.413402] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[   52.413551] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[   52.413681] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[   52.413764] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[   52.413844] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[   52.413923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[   52.414001] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[   52.414078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[   52.414154] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[   52.414230] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[   52.414307] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[   52.414413] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[   52.414516] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[   52.414617] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[   52.414699] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[   52.414779] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[   52.414852] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[   52.414923] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[   52.414995] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[   52.415065] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[   52.415137] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[   52.415911] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[   52.416012] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[   52.416087] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[   52.416164] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[   52.416230] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[   52.416294] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[   52.416378] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[   52.416469] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[   52.416566] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[   52.416648] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[   52.416718] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[   52.416784] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[   52.416853] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[   52.416925] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[   52.416991] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[   52.417055] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[   52.417118] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[   52.417203] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[   52.417281] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[   52.417367] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[   52.417464] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[   52.417640] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[   52.417744] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[   52.417836] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[   52.417908] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[   52.417972] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[   52.418036] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[   52.418098] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[   52.418160] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[   52.418221] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[   52.418282] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[   52.418360] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[   52.418438] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[   52.418515] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[   52.418590] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[   52.418657] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[   52.418716] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[   52.418776] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[   52.418839] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[   52.419052] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[   52.419125] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   52.419196] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   52.419266] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1
<7>[   52.419400] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7>[   52.419517] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7>[   52.419663] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[   52.419766] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[   52.419941] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[   52.420041] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   52.420139] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[   52.420226] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   52.420308] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   52.420423] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   52.420527] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   52.420628] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[   52.420713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   52.420788] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   52.420861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   52.420934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[   52.421005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   52.421076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[   52.421147] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   52.421216] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[   52.421287] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[   52.421376] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   52.421468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.421559] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.421645] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.421715] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.421789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.421867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   52.421945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   52.422026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   52.422105] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   52.422184] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   52.422257] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[   52.422338] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[   52.422427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   52.422516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.422606] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.422681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.422747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.422812] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.422877] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.422942] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.423005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.423067] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.423131] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.423195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[   52.423265] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[   52.423545] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[   52.423654] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[   52.463535] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[   52.535417] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[   52.672418] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[   52.672421] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[   52.672422] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[   52.672519] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[   52.672615] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   52.672700] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   52.672774] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   52.672870] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[   52.672951] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[   52.673039] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[   52.673101] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   52.673163] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   52.673222] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   52.674070] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[   52.674132] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[   52.674199] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[   52.674261] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[   52.674327] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[   52.674393] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[   52.674458] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[   52.674529] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[   52.674598] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[   52.674664] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[   52.674731] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[   52.674797] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[   52.674860] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[   52.674919] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[   52.674978] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[   52.675036] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[   52.675094] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[   52.675153] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[   52.675212] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[   52.675270] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[   52.675337] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[   52.675395] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[   52.675454] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[   52.675517] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[   52.675579] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[   52.675640] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[   52.675711] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[   52.675772] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[   52.675831] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[   52.675887] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[   52.675943] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[   52.676001] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[   52.676060] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[   52.676120] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[   52.676179] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[   52.676238] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[   52.676300] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[   52.676371] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[   52.676718] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[   52.676773] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[   52.676824] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[   52.677052] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[   52.677103] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[   52.677153] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[   52.677353] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[   52.677426] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[   52.677500] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[   52.677571] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[   52.677632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[   52.677691] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[   52.678044] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[   52.678108] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[   52.678170] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[   52.678229] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   52.678288] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[   52.678358] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   52.678419] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   52.678486] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   52.678550] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   52.678613] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   52.678675] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   52.678730] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   52.678779] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   52.678828] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   52.678897] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[   52.679038] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[   52.681943] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[   52.694829] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[   52.695587] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   52.695682] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   52.700385] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000086 [0x43/00]
<7>[   52.700521] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000092 [0x49/00]
<7>[   52.700606] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x80000534 [0x1A/05]
<7>[   52.703350] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 7ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   52.703677] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   52.704417] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[   52.704488] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[   52.704557] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[   52.704621] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[   52.704683] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[   52.704741] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[   52.704795] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[   52.704848] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[   52.704903] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7>[   52.708028] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[   52.708131] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7>[   52.708200] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[   52.710050] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[   52.714710] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[   52.714713] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[   52.714715] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[   52.714715] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[   52.714716] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[   52.714717] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[   52.714718] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[   52.714719] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[   52.714719] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[   52.714720] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[   52.714744] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[   52.714865] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[   52.714965] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[   52.715544] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[   52.715642] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[   52.715725] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[   52.715805] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[   52.715882] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[   52.715960] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[   52.716035] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[   52.716111] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[   52.716183] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[   52.716256] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[   52.716342] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[   52.716437] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[   52.716529] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[   52.716618] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[   52.716686] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[   52.716751] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[   52.716814] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[   52.716876] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[   52.716937] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[   52.716996] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[   52.717055] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[   52.717113] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[   52.717170] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[   52.717227] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[   52.717284] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[   52.717367] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[   52.717446] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[   52.717522] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[   52.717597] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[   52.717683] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[   52.718422] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[   52.718511] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[   52.718883] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[   52.718963] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[   52.719458] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[   52.719544] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   52.719624] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[   52.719695] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   52.719763] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[   52.719830] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   52.719894] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   52.719956] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   52.720017] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   52.720077] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   52.720135] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   52.720193] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   52.720250] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   52.720306] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[   52.720440] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[   52.720541] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[   52.736321] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[   52.737333] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   52.737747] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   52.757634] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   52.758070] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   52.759004] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.760964] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.762915] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   52.805874] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[   52.808552] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[   52.808816] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[   52.809109] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb (   0 -    0) -> (4054 - 4096), size    0 ->   42
<7>[   52.809370] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   52.809649] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   52.809920] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.810181] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.810456] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   52.812032] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[   52.813135] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[   52.813397] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[   52.820652] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[   52.830902] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[   52.835923] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[   52.836674] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[   52.839304] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[   52.839396] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[   52.839825] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[   52.840463] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[   52.840501] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[   52.840830] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[   52.841262] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[   52.841288] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[   52.841652] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[   52.842077] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[   52.842097] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[   52.842120] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[   52.849579] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
<6>[   52.852047] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[   52.853845] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[   52.853794] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[   52.853909] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[   52.855097] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   52.855234] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.855362] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   52.855493] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   52.855646] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.855744] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   52.855830] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   52.855938] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.856028] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   52.856112] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[   52.856304] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[   52.856453] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[   52.856553] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[   52.856646] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[   52.856805] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   52.856999] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   52.857014] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   52.857649] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   52.858184] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   52.858341] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   52.858469] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   52.858677] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   52.858684] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.858685] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.858687] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   52.858690] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.858691] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   52.858696] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.858697] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   52.858700] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.858724] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   52.858843] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   52.859504] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   52.859617] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   52.860612] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[   52.860825] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.860827] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.860828] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.860858] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   52.860870] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.860881] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   52.860891] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   52.861035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   52.861045] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   52.861053] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   52.861175] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   52.861182] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   52.861188] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   52.861293] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   52.861300] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   52.861302] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   52.861304] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   52.861305] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   52.861398] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   52.861415] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[   52.861418] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[   52.861430] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   52.861624] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[   52.861638] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<7>[   52.862612] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[   52.868405] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01d97000
<6>[   52.869159] fbcon: xedrmfb (fb0) is primary device
<7>[   52.869953] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[   52.870071] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[   52.870171] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[   52.870274] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[   52.870395] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[   52.870523] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[   52.870648] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[   52.870762] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[   52.870860] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, 
<7>[   52.870960] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[   52.871052] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[   52.871143] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   52.871232] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   52.871329] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[   52.871442] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   52.871554] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   52.871663] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   52.871748] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[   52.871833] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[   52.871920] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, 
<7>[   52.872004] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[   52.872089] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   52.872172] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   52.872256] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[   52.872373] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   52.872484] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   52.872596] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   52.872692] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[   52.872781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[   52.872877] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[   52.872966] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[   52.873088] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 -    0) -> (   0 - 4054), size    0 -> 4054
<7>[   52.873180] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[   52.873269] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   lines    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    1,  12,  12,  12,  11,  12,   0,   0,   0,   3,    0
<7>[   52.873376] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]  blocks    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   24, 289, 289, 289, 265, 289,   0,   0,  38,  73,   87
<7>[   52.873483] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   28, 319, 319, 319, 293, 319,   0,   0,  39,  82,   88
<7>[   52.873582] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.873680] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.873760] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.873833] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.873906] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.873978] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874051] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874125] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874198] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.874269] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874349] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874437] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874525] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.874611] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874695] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874765] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874835] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   52.874905] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.874974] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.875036] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   52.875102] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[   52.875203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   52.875299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   52.875422] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.875528] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   52.875631] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   52.875747] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[   52.875851] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[   52.875933] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   52.876013] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[   52.876091] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   52.876166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   52.876242] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   52.876324] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   52.876422] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[   52.876520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   52.876616] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   52.876701] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   52.876780] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[   52.876858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   52.876934] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[   52.877011] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[   52.877087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     pixelformat: RGB
<7>[   52.877162] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     colorimetry: sRGB
<7>[   52.877238] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     bpc: 0
<7>[   52.877317] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     dynamic range: VESA range
<7>[   52.877404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     content type: Not defined
<7>[   52.877500] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   52.877597] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[   52.877686] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[   52.877764] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   52.877838] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.877914] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.877988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.878061] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   52.878130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   52.878196] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   52.878261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   52.878329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   52.878410] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   52.878492] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   52.878574] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[   52.878650] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[   52.878713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   52.878774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.878835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.878895] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.878959] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.879027] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.879094] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   52.879160] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.879233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.879304] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   52.879400] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   52.879483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[   52.879566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[   52.879647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[   52.879727] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[   52.879794] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[   52.879860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[   52.879925] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[   52.879990] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[   52.880695] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] 
<6>[   52.910254] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[   52.910633] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[   52.933501] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[   53.087528] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[   53.088061] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[   53.109568] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   53.109648] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[   53.109865] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   53.109938] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[   53.110273] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[   53.162612] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   53.162936] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   53.190969] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   53.191412] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[   53.191368] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.192007] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[   53.192019] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.192303] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[   53.192638] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[   53.192881] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[   53.193116] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[   53.193349] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[   53.193560] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[   53.193771] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[   53.193979] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[   53.194227] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[   53.194473] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[   53.194687] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[   53.194901] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[   53.195112] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[   53.195349] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   53.196181] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   53.196431] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   53.196685] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[   53.196973] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.196992] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[   53.197231] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (495 ms remaining)
<7>[   53.344255] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[   53.695672] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[   53.715810] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   53.716108] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[   53.716439] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[   53.752902] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   53.753228] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   53.753542] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[   53.753971] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   53.864703] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.864732] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.864768] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.002535] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   54.004697] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   54.005022] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[   54.008375] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   54.009674] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[   54.010888] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[   54.012100] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[   54.013240] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[   54.014632] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[   54.014955] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[   54.016625] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[   54.016936] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[   54.017691] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[   54.018185] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] 
<7>[   54.018552] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[   54.018970] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[   54.021107] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[   54.021128] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[   54.021469] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[   54.035092] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[   54.037453] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[   54.037809] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[   54.039121] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[   54.041495] Console: switching to colour frame buffer device 180x56
<6>[   54.056247] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[   54.066526] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[   54.066907] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[   54.067188] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[   54.067489] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[   54.067733] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[   54.067963] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[   54.068182] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[   54.068420] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[   54.068634] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[   54.068841] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[   54.069045] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[   54.069244] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[   54.069466] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[   54.069675] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[   54.069868] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[   54.070069] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[   54.070279] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[   54.070506] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[   54.070704] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[   54.070900] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[   54.071090] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[   54.071274] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[   54.071600] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] 
<7>[   54.071640] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   54.072201] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   54.072232] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   54.072700] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[   54.072941] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[   54.073260] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[   54.073638] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[   54.073998] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[   54.074325] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   54.074783] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   54.075570] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   54.075810] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   54.075997] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   54.076498] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   54.076512] [drm] DisplayID checksum invalid, remainder is 248
<5>[   54.076516] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.076519] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   54.076526] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.076530] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   54.076542] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.076545] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   54.076552] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.076592] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   54.076840] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   54.077745] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   54.077962] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   54.078257] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[   54.079659] [drm] DisplayID checksum invalid, remainder is 248
<5>[   54.079664] [drm] DisplayID checksum invalid, remainder is 248
<5>[   54.079667] [drm] DisplayID checksum invalid, remainder is 248
<7>[   54.079732] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   54.080836] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   54.080862] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   54.080931] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[   54.080883] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   54.082388] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   54.082685] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   54.082912] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   54.083198] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   54.083752] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   54.083782] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   54.083805] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   54.084076] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   54.084291] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   54.084824] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   54.084849] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   54.085154] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   54.085398] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   54.085420] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   54.085429] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   54.085434] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   54.085438] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   54.087279] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   54.087753] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[   54.087763] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[   54.088562] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<6>[   54.089510] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[   54.090606] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[   54.092124] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[   54.093207] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   54.093536] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[   54.103911] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[   54.119110] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[   54.119557] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[   54.120363] [IGT] xe_module_load: exiting, ret=0
<7>[   54.145728] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   54.146140] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   54.146614] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   54.146889] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   54.147149] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   54.147435] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   54.147713] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   54.147990] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   54.148270] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   54.148564] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   54.148844] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   54.149124] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   54.149433] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   54.149716] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   54.149997] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   54.150279] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   54.150583] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   54.150895] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   54.151186] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   54.151486] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   54.151777] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   54.152069] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   54.152368] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   54.152652] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   54.152927] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   54.153202] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   54.153522] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   54.153803] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   54.154081] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   54.154373] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   54.154654] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   54.154927] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   54.155204] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   54.155500] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   54.155783] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   54.156046] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[   54.172804] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[   54.174979] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[   54.176527] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[   54.178062] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[   54.192386] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   54.192675] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   54.192873] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   54.253101] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[   54.253226] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[   55.143402] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   55.143420] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   55.143399] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   55.229307] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   56.617128] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[   56.617476] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067