<5>[    0.000000] Linux version 6.14.0-rc6-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Mar 14 19:05:34 UTC 2025
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   Intel GenuineIntel
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000]   Hygon HygonGenuine
<6>[    0.000000]   Centaur CentaurHauls
<6>[    0.000000]   zhaoxin   Shanghai  
<6>[    0.000000] x86/tme: not enabled by BIOS
<6>[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] APIC: Static calls initialized
<6>[    0.000000] efi: EFI v2.7 by Intel
<6>[    0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fef5000 SMBIOS=0x6cbc7000 MEMATTR=0x68f39018 ESRT=0x68f71098 MOKvar=0x6cd0c000 TPMEventLog=0x6ff5a018 
<6>[    0.000000] efi: Remove mem254: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[    0.000000] efi: Remove mem256: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[    0.000000] SMBIOS 3.8 present.
<6>[    0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D86.2501240726 01/24/2025
<6>[    0.000000] DMI: Memory slots populated: 8/8
<6>[    0.000000] tsc: Detected 3100.000 MHz processor
<6>[    0.000000] tsc: Detected 3110.400 MHz TSC
<7>[    0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[    0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[    0.000018] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
<6>[    0.000371] x2apic: enabled by BIOS, switching to x2apic ops
<6>[    0.000372] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[    0.004641] esrt: Reserving ESRT space from 0x0000000068f71098 to 0x0000000068f711e8.
<7>[    0.004649] e820: update [mem 0x68f71000-0x68f71fff] usable ==> reserved
<6>[    0.004667] Using GB pages for direct mapping
<6>[    0.005352] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[    0.005353] printk: early log buf free: 258888(98%)
<6>[    0.005354] Secure boot disabled
<6>[    0.005355] ACPI: Early table checksum verification disabled
<6>[    0.005359] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[    0.005361] ACPI: XSDT 0x000000006FF71228 0001A4 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005365] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL  LNL      00000002      01000013)
<6>[    0.005368] ACPI: DSDT 0x000000006FFB6000 0254DE (v02 INTEL  LNL      00000002      01000013)
<6>[    0.005370] ACPI: FACS 0x000000006FED9000 000040
<6>[    0.005371] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[    0.005372] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef  Cpu0Ist  00003000 INTL 20210930)
<6>[    0.005374] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef  Cpu0Hwp  00003000 INTL 20210930)
<6>[    0.005375] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20210930)
<6>[    0.005376] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20210930)
<6>[    0.005378] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef  ApIst    00003000 INTL 20210930)
<6>[    0.005379] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef  ApHwp    00003000 INTL 20210930)
<6>[    0.005381] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef  ApPsd    00003000 INTL 20210930)
<6>[    0.005382] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef  ApCst    00003000 INTL 20210930)
<6>[    0.005383] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt  00003000 INTL 20210930)
<6>[    0.005384] ACPI: DTPR 0x000000006FFEC000 000090 (v01                 00000000      00000000)
<6>[    0.005386] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL  PDatTabl 00001000 INTL 20210930)
<6>[    0.005387] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL  IgfxSsdt 00003000 INTL 20210930)
<6>[    0.005388] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL  TseSsdt  00001000 INTL 20210930)
<6>[    0.005390] ACPI: SSDT 0x000000006FFDD000 009156 (v02 INTEL  TcssSsdt 00001000 INTL 20210930)
<6>[    0.005391] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL  IpuSsdt  00001000 INTL 20210930)
<6>[    0.005392] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL  LnlMRvp1 00001000 INTL 20210930)
<6>[    0.005394] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL  I2Pm_Rvp 00001000 INTL 20210930)
<6>[    0.005395] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL  Ther_Rvp 00001000 INTL 20210930)
<6>[    0.005396] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005397] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005399] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL  LNL      00000000      01000013)
<6>[    0.005400] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005401] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL  PepoSsdt 00001000 INTL 20210930)
<6>[    0.005403] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[    0.005404] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[    0.005405] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL  Cnv_Ssdt 00001000 INTL 20210930)
<6>[    0.005406] ACPI: SSDT 0x000000006FF85000 00060E (v02 INTEL  Tpm2Tabl 00001000 INTL 20210930)
<6>[    0.005408] ACPI: TPM2 0x000000006FF84000 00004C (v04 INTEL  LNL      00000002      01000013)
<6>[    0.005409] ACPI: LPIT 0x000000006FF83000 0000CC (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005410] ACPI: SSDT 0x000000006FF82000 000D5C (v02 INTEL  PtidDevc 00001000 INTL 20210930)
<6>[    0.005412] ACPI: SSDT 0x000000006FF81000 0001F0 (v02 INTEL  TbtTypeC 00000000 INTL 20210930)
<6>[    0.005413] ACPI: DBGP 0x000000006FF80000 000034 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005414] ACPI: DBG2 0x000000006FF7F000 000054 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005416] ACPI: NHLT 0x000000006FF7E000 0002E3 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005417] ACPI: SSDT 0x000000006FF7C000 00115C (v02 INTEL  UsbCTabl 00001000 INTL 20210930)
<6>[    0.005418] ACPI: SSDT 0x000000006FF75000 00653B (v02 INTEL  EcSsdt   00000000 INTL 20210930)
<6>[    0.005420] ACPI: ECDT 0x000000006FF74000 000069 (v01        LNL      00000002      01000013)
<6>[    0.005421] ACPI: DMAR 0x000000006FF73000 0000D8 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005422] ACPI: FPDT 0x000000006FF72000 000044 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005423] ACPI: SSDT 0x000000006FFA8000 00086D (v02 INTEL  xh_lnl_m 00000000 INTL 20210930)
<6>[    0.005425] ACPI: SSDT 0x000000006FF6F000 0013DB (v02 SocGpe SocGpe   00003000 INTL 20210930)
<6>[    0.005426] ACPI: SSDT 0x000000006FF6C000 002463 (v02 SocCmn SocCmn   00003000 INTL 20210930)
<6>[    0.005428] ACPI: SDEV 0x000000006FF6B000 000046 (v01                 00000000      00000000)
<6>[    0.005429] ACPI: SSDT 0x000000006FF60000 00A4FA (v02 INTEL  St09Ssdt 00001000 INTL 20210930)
<6>[    0.005430] ACPI: PHAT 0x000000006FF5F000 0007C0 (v01 INTEL  LNL      00000005 MSFT 0100000D)
<6>[    0.005432] ACPI: BGRT 0x000000006FF5E000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005433] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113]
<6>[    0.005433] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb4dd]
<6>[    0.005434] ACPI: Reserving FACS table memory at [mem 0x6fed9000-0x6fed903f]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[    0.005435] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[    0.005435] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[    0.005435] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[    0.005437] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f]
<6>[    0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[    0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6155]
<6>[    0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df]
<6>[    0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2]
<6>[    0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e]
<6>[    0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955]
<6>[    0.005439] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037]
<6>[    0.005440] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[    0.005440] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7]
<6>[    0.005440] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b]
<6>[    0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2]
<6>[    0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320]
<6>[    0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469]
<6>[    0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815]
<6>[    0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ff85000-0x6ff8560d]
<6>[    0.005442] ACPI: Reserving TPM2 table memory at [mem 0x6ff84000-0x6ff8404b]
<6>[    0.005442] ACPI: Reserving LPIT table memory at [mem 0x6ff83000-0x6ff830cb]
<6>[    0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff82d5b]
<6>[    0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff811ef]
<6>[    0.005443] ACPI: Reserving DBGP table memory at [mem 0x6ff80000-0x6ff80033]
<6>[    0.005443] ACPI: Reserving DBG2 table memory at [mem 0x6ff7f000-0x6ff7f053]
<6>[    0.005444] ACPI: Reserving NHLT table memory at [mem 0x6ff7e000-0x6ff7e2e2]
<6>[    0.005444] ACPI: Reserving SSDT table memory at [mem 0x6ff7c000-0x6ff7d15b]
<6>[    0.005444] ACPI: Reserving SSDT table memory at [mem 0x6ff75000-0x6ff7b53a]
<6>[    0.005444] ACPI: Reserving ECDT table memory at [mem 0x6ff74000-0x6ff74068]
<6>[    0.005445] ACPI: Reserving DMAR table memory at [mem 0x6ff73000-0x6ff730d7]
<6>[    0.005445] ACPI: Reserving FPDT table memory at [mem 0x6ff72000-0x6ff72043]
<6>[    0.005445] ACPI: Reserving SSDT table memory at [mem 0x6ffa8000-0x6ffa886c]
<6>[    0.005446] ACPI: Reserving SSDT table memory at [mem 0x6ff6f000-0x6ff703da]
<6>[    0.005446] ACPI: Reserving SSDT table memory at [mem 0x6ff6c000-0x6ff6e462]
<6>[    0.005446] ACPI: Reserving SDEV table memory at [mem 0x6ff6b000-0x6ff6b045]
<6>[    0.005447] ACPI: Reserving SSDT table memory at [mem 0x6ff60000-0x6ff6a4f9]
<6>[    0.005447] ACPI: Reserving PHAT table memory at [mem 0x6ff5f000-0x6ff5f7bf]
<6>[    0.005447] ACPI: Reserving BGRT table memory at [mem 0x6ff5e000-0x6ff5e037]
<6>[    0.005515] APIC: Switched APIC routing to: cluster x2apic
<6>[    0.005722] No NUMA configuration found
<6>[    0.005723] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[    0.005727] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[    0.005838] Zone ranges:
<6>[    0.005838]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.005839]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.005840]   Normal   [mem 0x0000000100000000-0x000000087f7fffff]
<6>[    0.005841]   Device   empty
<6>[    0.005841] Movable zone start for each node
<6>[    0.005842] Early memory node ranges
<6>[    0.005842]   node   0: [mem 0x0000000000001000-0x000000000009efff]
<6>[    0.005843]   node   0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[    0.005843]   node   0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[    0.005844]   node   0: [mem 0x0000000104500000-0x000000087f7fffff]
<6>[    0.005845] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[    0.005849] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[    0.005866] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[    0.007890] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[    0.036409] On node 0, zone Normal: 17664 pages in unavailable ranges
<6>[    0.036474] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[    0.036959] ACPI: PM-Timer IO Port: 0x1808
<6>[    0.036965] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[    0.037016] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[    0.037018] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.037019] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[    0.037021] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[    0.037022] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[    0.037033] e820: update [mem 0x68f52000-0x68f6cfff] usable ==> reserved
<6>[    0.037040] TSC deadline timer available
<6>[    0.037042] CPU topo: Max. logical packages:   1
<6>[    0.037042] CPU topo: Max. logical dies:       1
<6>[    0.037042] CPU topo: Max. dies per package:   1
<6>[    0.037044] CPU topo: Max. threads per core:   1
<6>[    0.037044] CPU topo: Num. cores per package:     8
<6>[    0.037044] CPU topo: Num. threads per package:   8
<6>[    0.037045] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[    0.037057] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.037058] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[    0.037059] PM: hibernation: Registered nosave memory: [mem 0x68f52000-0x68f6cfff]
<6>[    0.037060] PM: hibernation: Registered nosave memory: [mem 0x68f71000-0x68f71fff]
<6>[    0.037061] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[    0.037061] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[    0.037061] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[    0.037062] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[    0.037062] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[    0.037063] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[    0.037063] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[    0.037063] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1044fffff]
<6>[    0.037065] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[    0.037065] Booting paravirtualized kernel on bare hardware
<6>[    0.037067] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[    0.037075] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[    0.037410] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[    0.037414] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[    0.037415] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
<5>[    0.037429] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[    0.037511] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[    0.037526] random: crng init done
<6>[    0.039366] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[    0.040270] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[    0.040324] Fallback order for Node 0: 0 
<6>[    0.040326] Built 1 zonelists, mobility grouping on.  Total pages: 8289632
<6>[    0.040327] Policy zone: Normal
<6>[    0.040336] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[    0.040337] stackdepot: allocating hash table via alloc_large_system_hash
<6>[    0.040339] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[    0.041285] software IO TLB: area num 8.
<4>[    0.087047] **********************************************************
<4>[    0.087048] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.087049] **                                                      **
<4>[    0.087049] ** This system shows unhashed kernel memory addresses   **
<4>[    0.087049] ** via the console, logs, and other interfaces. This    **
<4>[    0.087049] ** might reduce the security of your system.            **
<4>[    0.087050] **                                                      **
<4>[    0.087050] ** If you see this message and you are not debugging    **
<4>[    0.087050] ** the kernel, report this immediately to your system   **
<4>[    0.087050] ** administrator!                                       **
<4>[    0.087050] **                                                      **
<4>[    0.087050] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.087050] **********************************************************
<6>[    0.088119] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[    0.088437] ftrace: allocating 59560 entries in 233 pages
<6>[    0.113650] ftrace: allocated 233 pages with 5 groups
<6>[    0.114879] Dynamic Preempt: voluntary
<6>[    0.115324] Running RCU self tests
<6>[    0.115324] Running RCU synchronous self tests
<6>[    0.115325] rcu: Preemptible hierarchical RCU implementation.
<6>[    0.115325] rcu: 	RCU lockdep checking is enabled.
<6>[    0.115326] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[    0.115327] 	Trampoline variant of Tasks RCU enabled.
<6>[    0.115327] 	Rude variant of Tasks RCU enabled.
<6>[    0.115327] 	Tracing variant of Tasks RCU enabled.
<6>[    0.115327] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[    0.115328] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[    0.115365] Running RCU synchronous self tests
<6>[    0.115368] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115371] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115374] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.125435] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[    0.125886] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.126218] Console: colour dummy device 80x25
<6>[    0.126226] printk: legacy console [tty0] enabled
<6>[    0.127480] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[    0.127488] ... MAX_LOCKDEP_SUBCLASSES:  8
<6>[    0.127491] ... MAX_LOCK_DEPTH:          48
<6>[    0.127495] ... MAX_LOCKDEP_KEYS:        8192
<6>[    0.127499] ... CLASSHASH_SIZE:          4096
<6>[    0.127502] ... MAX_LOCKDEP_ENTRIES:     524288
<6>[    0.127506] ... MAX_LOCKDEP_CHAINS:      524288
<6>[    0.127510] ... CHAINHASH_SIZE:          262144
<6>[    0.127513]  memory used by lock dependency info: 54145 kB
<6>[    0.127518]  memory used for stack traces: 4224 kB
<6>[    0.127522]  per task-struct memory footprint: 1920 bytes
<6>[    0.127572] ACPI: Core revision 20240827
<6>[    0.128462] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[    0.128525] APIC: Switch to symmetric I/O mode setup
<6>[    0.128531] DMAR: Host address width 38
<6>[    0.128535] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[    0.128569] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128598] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[    0.128621] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128647] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[    0.128669] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[    0.128703] DMAR: SATC flags: 0x1
<6>[    0.128711] DMAR-IR: IOAPIC id 2 under DRHD base  0xfc820000 IOMMU 2
<6>[    0.128716] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[    0.128720] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[    0.130772] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[    0.135867] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[    0.135885] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[    0.135960] CPU0: Thermal monitoring enabled (TM1)
<6>[    0.135966] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[    0.136143] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[    0.136147] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[    0.136157] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[    0.136164] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[    0.136168] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[    0.136176] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[    0.136182] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[    0.136197] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[    0.136203] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[    0.136208] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[    0.136213] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[    0.136219] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[    0.136225] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
<6>[    0.136230] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
<6>[    0.136235] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
<6>[    0.136240] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[    0.136880] Freeing SMP alternatives memory: 48K
<6>[    0.136880] pid_max: default: 32768 minimum: 301
<6>[    0.136880] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[    0.136880] landlock: Up and running.
<6>[    0.136880] Yama: becoming mindful.
<6>[    0.136880] AppArmor: AppArmor initialized
<6>[    0.136880] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136880] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136880] Running RCU synchronous self tests
<6>[    0.136880] Running RCU synchronous self tests
<6>[    0.136880] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[    0.136880] Running RCU Tasks wait API self tests
<6>[    0.136880] Running RCU Tasks Rude wait API self tests
<6>[    0.136880] Running RCU Tasks Trace wait API self tests
<6>[    0.136880] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[    0.136880] core: cpu_core PMU driver: 
<6>[    0.136884] ... version:                6
<6>[    0.136888] ... bit width:              48
<6>[    0.136891] ... generic registers:      10
<6>[    0.136895] ... value mask:             0000ffffffffffff
<6>[    0.136900] ... max period:             00007fffffffffff
<6>[    0.136904] ... fixed-purpose events:   4
<6>[    0.136907] ... event mask:             0001000f000003ff
<6>[    0.136937] signal: max sigframe size: 3632
<6>[    0.136958] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[    0.137045] rcu: Hierarchical SRCU implementation.
<6>[    0.137049] rcu: 	Max phase no-delay instances is 400.
<6>[    0.137188] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[    0.138983] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[    0.139238] smp: Bringing up secondary CPUs ...
<6>[    0.139591] smpboot: x86: Booting SMP configuration:
<6>[    0.139598] .... node  #0, CPUs:      #1 #2 #3
<6>[    0.141910] Callback from call_rcu_tasks_trace() invoked.
<4>[    0.142293]  #4 #5 #6 #7
<6>[    0.010811] core: cpu_atom PMU driver: 
<6>[    0.010811] ... version:                6
<6>[    0.010811] ... bit width:              48
<6>[    0.010811] ... generic registers:      8
<6>[    0.010811] ... value mask:             0000ffffffffffff
<6>[    0.010811] ... max period:             00007fffffffffff
<6>[    0.010811] ... fixed-purpose events:   6
<6>[    0.010811] ... event mask:             00000077000000ff
<6>[    0.152017] smp: Brought up 1 node, 8 CPUs
<6>[    0.153190] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[    0.154996] Memory: 32359928K/33158528K available (24294K kernel code, 5580K rwdata, 9276K rodata, 5624K init, 68408K bss, 775236K reserved, 0K cma-reserved)
<6>[    0.156754] devtmpfs: initialized
<6>[    0.157042] x86/mm: Memory block size: 128MB
<6>[    0.172426] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[    0.173188] Running RCU synchronous self tests
<6>[    0.173200] Running RCU synchronous self tests
<6>[    0.173216] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.173216] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[    0.173216] pinctrl core: initialized pinctrl subsystem
<6>[    0.174148] PM: RTC time: 09:46:23, date: 2025-03-15
<6>[    0.175001] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.176029] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.176322] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.176609] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.176668] audit: initializing netlink subsys (disabled)
<5>[    0.176953] audit: type=2000 audit(1742031983.041:1): state=initialized audit_enabled=0 res=1
<6>[    0.177557] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.177559] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.177565] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.177569] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.177573] thermal_sys: Registered thermal governor 'power_allocator'
<6>[    0.177618] EISA bus registered
<6>[    0.177645] cpuidle: using governor ladder
<6>[    0.177883] cpuidle: using governor menu
<6>[    0.177982] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    0.178346] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[    0.178373] PCI: Using configuration type 1 for base access
<6>[    0.178510] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[    0.180135] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[    0.180135] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[    0.180135] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[    0.180135] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[    0.199880] raid6: avx2x4   gen() 78036 MB/s
<6>[    0.216880] raid6: avx2x2   gen() 83346 MB/s
<6>[    0.233880] raid6: avx2x1   gen() 71094 MB/s
<6>[    0.233885] raid6: using algorithm avx2x2 gen() 83346 MB/s
<6>[    0.250881] raid6: .... xor() 52761 MB/s, rmw enabled
<6>[    0.250886] raid6: using avx2x2 recovery algorithm
<6>[    0.253801] fbcon: Taking over console
<6>[    0.254039] ACPI: Added _OSI(Module Device)
<6>[    0.254047] ACPI: Added _OSI(Processor Device)
<6>[    0.254053] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.254060] ACPI: Added _OSI(Processor Aggregator Device)
<6>[    0.756650] ACPI: 32 ACPI AML tables successfully acquired and loaded
<6>[    0.780142] ACPI: EC: EC started
<6>[    0.780167] ACPI: EC: interrupt blocked
<6>[    0.784449] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[    0.784459] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[    0.890912] Callback from call_rcu_tasks() invoked.
<6>[    1.077733] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.077748] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.105493] ACPI: Interpreter enabled
<6>[    1.105591] ACPI: PM: (supports S0 S4 S5)
<6>[    1.105596] ACPI: Using IOAPIC for interrupt routing
<6>[    1.113889] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    1.113909] PCI: Ignoring E820 reservations for host bridge windows
<6>[    1.165650] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[    1.165725] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[    1.247875] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[    1.248159] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[    1.251083] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[    1.584471] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[    1.599249] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[    1.735616] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[    1.737424] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[    1.752546] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[    1.778897] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[    1.779583] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[    1.780279] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[    1.889450] ACPI: \: Can't tag data node
<3>[    1.891424] ACPI: \: Can't tag data node
<3>[    1.892855] ACPI: \: Can't tag data node
<3>[    1.893955] ACPI: \: Can't tag data node
<3>[    1.895169] ACPI: \: Can't tag data node
<6>[    2.039807] ACPI: \_TZ_.FN00: New power resource
<6>[    2.040297] ACPI: \_TZ_.FN01: New power resource
<6>[    2.040768] ACPI: \_TZ_.FN02: New power resource
<6>[    2.041241] ACPI: \_TZ_.FN03: New power resource
<6>[    2.041720] ACPI: \_TZ_.FN04: New power resource
<6>[    2.043353] ACPI: \PIN_: New power resource
<6>[    2.046557] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[    2.046572] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[    2.050075] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[    2.069937] PCI host bridge to bus 0000:00
<6>[    2.071113] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    2.071148] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    2.071176] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    2.071196] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[    2.071217] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[    2.071245] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[    2.079144] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[    2.080501] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[    2.080639] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[    2.080660] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[    2.080682] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[    2.080769] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[    2.084015] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[    2.084086] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[    2.087229] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[    2.087298] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[    2.087317] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[    2.089381] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[    2.089463] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.089487] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[    2.089522] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[    2.089738] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[    2.089824] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[    2.102187] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[    2.102270] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.102294] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[    2.102328] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[    2.102531] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[    2.102609] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[    2.110631] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[    2.110676] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.110689] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[    2.110707] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[    2.110843] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[    2.110897] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[    2.115034] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[    2.115076] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[    2.115092] pci 0000:00:0a.0: enabling Extended Tags
<6>[    2.115334] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[    2.115368] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[    2.115377] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[    2.115851] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.115911] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[    2.115996] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[    2.118306] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.118369] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[    2.118380] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[    2.118453] pci 0000:00:0d.2: supports D1 D2
<6>[    2.118459] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.120185] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.120242] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[    2.120252] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[    2.120317] pci 0000:00:0d.3: supports D1 D2
<6>[    2.120322] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.121720] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[    2.121779] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[    2.121851] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[    2.124804] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.124886] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[    2.124989] pci 0000:00:13.0: PME# supported from D3hot
<6>[    2.125375] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.125427] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[    2.125495] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[    2.127489] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[    2.127553] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[    2.127562] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[    2.127866] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.127986] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.129351] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.129444] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.130777] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.130944] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.132339] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.132433] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.133719] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.133810] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[    2.133926] pci 0000:00:16.0: PME# supported from D3hot
<6>[    2.136464] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[    2.136498] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.136506] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[    2.136514] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[    2.136635] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    2.136691] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[    2.141297] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[    2.141403] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.141434] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[    2.141774] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[    2.142112] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[    2.147035] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[    2.148434] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[    2.148549] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[    2.148564] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[    2.148673] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[    2.149069] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[    2.149137] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[    2.149149] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
<6>[    2.154218] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.154721] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[    2.155217] pci 0000:00:1f.6: [8086:550f] type 00 class 0x020000 conventional PCI endpoint
<6>[    2.155391] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[    2.155579] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[    2.158902] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.159250] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.159595] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.159976] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[    2.160090] pci 0000:7f:00.0: BAR 0 [io  0x3000-0x30ff]
<6>[    2.160110] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[    2.160128] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[    2.160384] pci 0000:7f:00.0: supports D1 D2
<6>[    2.160394] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.161581] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.163389] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.164935] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[    2.165039] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[    2.168451] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.168571] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.627164] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[   12.927560] Low-power S0 idle used by default for system suspend
<6>[   12.979313] ACPI: EC: interrupt unblocked
<6>[   12.979324] ACPI: EC: event unblocked
<6>[   12.979358] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[   12.979365] ACPI: EC: GPE=0x6e
<6>[   12.979370] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[   12.979379] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[   12.980299] iommu: Default domain type: Translated
<6>[   12.980299] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[   12.981720] SCSI subsystem initialized
<7>[   12.982135] libata version 3.00 loaded.
<6>[   12.982244] ACPI: bus type USB registered
<6>[   12.982318] usbcore: registered new interface driver usbfs
<6>[   12.982352] usbcore: registered new interface driver hub
<6>[   12.982394] usbcore: registered new device driver usb
<6>[   12.982524] pps_core: LinuxPPS API ver. 1 registered
<6>[   12.982528] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[   12.982550] PTP clock support registered
<6>[   12.982891] EDAC MC: Ver: 3.0.0
<6>[   12.983896] efivars: Registered efivars operations
<6>[   12.986475] NetLabel: Initializing
<6>[   12.986487] NetLabel:  domain hash size = 128
<6>[   12.986498] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
<6>[   12.986650] NetLabel:  unlabeled traffic allowed by default
<6>[   12.986686] mctp: management component transport protocol core
<6>[   12.986699] NET: Registered PF_MCTP protocol family
<6>[   12.986777] PCI: Using ACPI for IRQ routing
<7>[   13.036636] PCI: pci_cache_line_size set to 64 bytes
<6>[   13.036908] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[   13.037165] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[   13.037186] e820: reserve RAM buffer [mem 0x68f52000-0x6bffffff]
<7>[   13.037194] e820: reserve RAM buffer [mem 0x68f71000-0x6bffffff]
<7>[   13.037200] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[   13.037206] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[   13.039230] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[   13.039230] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[   13.039230] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[   13.039230] vgaarb: loaded
<6>[   13.040677] clocksource: Switched to clocksource tsc-early
<5>[   13.050395] VFS: Disk quotas dquot_6.6.0
<6>[   13.050445] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[   13.052452] AppArmor: AppArmor Filesystem Enabled
<6>[   13.052852] pnp: PnP ACPI init
<6>[   13.054920] system 00:00: [io  0x0680-0x069f] has been reserved
<6>[   13.054945] system 00:00: [io  0x164e-0x164f] has been reserved
<6>[   13.058086] system 00:02: [io  0x06a4] has been reserved
<6>[   13.058106] system 00:02: [io  0x06a0] has been reserved
<6>[   13.107303] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[   13.107330] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[   13.107356] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[   13.107376] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[   13.107397] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[   13.107419] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[   13.107442] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[   13.107461] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[   13.114236] system 00:04: [io  0x2000-0x20fe] has been reserved
<6>[   13.118409] system 00:06: [io  0x1854-0x1857] has been reserved
<6>[   13.118682] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[   13.126393] pnp: PnP ACPI: found 8 devices
<6>[   13.140712] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[   13.141940] NET: Registered PF_INET protocol family
<6>[   13.142236] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   13.145473] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[   13.145782] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[   13.146003] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   13.147030] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[   13.149013] TCP: Hash tables configured (established 262144 bind 65536)
<6>[   13.149704] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   13.151113] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   13.152787] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[   13.152922] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[   13.152941] pci 0000:00:07.1: bridge window [io  0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[   13.152955] pci 0000:00:07.2: bridge window [io  0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[   13.153026] pci 0000:00:07.0: bridge window [io  0x4000-0x4fff]: assigned
<6>[   13.153036] pci 0000:00:07.1: bridge window [io  0x5000-0x5fff]: assigned
<6>[   13.153045] pci 0000:00:07.2: bridge window [io  0x6000-0x6fff]: assigned
<6>[   13.153056] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[   13.153111] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[   13.153166] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[   13.153216] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[   13.153272] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[   13.153317] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[   13.153331] pci 0000:00:07.0:   bridge window [io  0x4000-0x4fff]
<6>[   13.153343] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[   13.153355] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   13.153370] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[   13.153379] pci 0000:00:07.1:   bridge window [io  0x5000-0x5fff]
<6>[   13.153390] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[   13.153401] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   13.153417] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[   13.153425] pci 0000:00:07.2:   bridge window [io  0x6000-0x6fff]
<6>[   13.153437] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[   13.153448] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   13.153464] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[   13.153472] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[   13.153483] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[   13.153498] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[   13.153534] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[   13.153581] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<6>[   13.153590] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<6>[   13.153598] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[   13.153607] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[   13.153615] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[   13.153625] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
<6>[   13.153632] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[   13.153640] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   13.153650] pci_bus 0000:2b: resource 0 [io  0x5000-0x5fff]
<6>[   13.153658] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[   13.153666] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   13.153676] pci_bus 0000:55: resource 0 [io  0x6000-0x6fff]
<6>[   13.153683] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[   13.153691] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   13.153701] pci_bus 0000:7f: resource 0 [io  0x3000-0x3fff]
<6>[   13.153708] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[   13.153717] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[   13.155181] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[   13.157362] PCI: CLS 0 bytes, default 64
<6>[   13.157505] DMAR: No RMRR found
<6>[   13.157520] DMAR: No ATSR found
<6>[   13.157526] DMAR: dmar1: Using Queued invalidation
<6>[   13.157555] DMAR: dmar0: Using Queued invalidation
<6>[   13.157567] DMAR: dmar2: Using Queued invalidation
<6>[   13.158712] pci 0000:00:04.0: Adding to iommu group 0
<6>[   13.158826] pci 0000:00:05.0: Adding to iommu group 1
<6>[   13.158910] pci 0000:00:0a.0: Adding to iommu group 2
<6>[   13.158985] pci 0000:00:0b.0: Adding to iommu group 3
<6>[   13.163275] pci 0000:00:02.0: Adding to iommu group 4
<6>[   13.164938] pci 0000:00:00.0: Adding to iommu group 5
<6>[   13.165028] pci 0000:00:07.0: Adding to iommu group 6
<6>[   13.165118] pci 0000:00:07.1: Adding to iommu group 7
<6>[   13.165198] pci 0000:00:07.2: Adding to iommu group 8
<6>[   13.165305] pci 0000:00:0d.0: Adding to iommu group 9
<6>[   13.165356] pci 0000:00:0d.2: Adding to iommu group 9
<6>[   13.165407] pci 0000:00:0d.3: Adding to iommu group 9
<6>[   13.165490] pci 0000:00:12.0: Adding to iommu group 10
<6>[   13.165572] pci 0000:00:13.0: Adding to iommu group 11
<6>[   13.165663] pci 0000:00:14.0: Adding to iommu group 12
<6>[   13.165718] pci 0000:00:14.2: Adding to iommu group 12
<6>[   13.165834] pci 0000:00:15.0: Adding to iommu group 13
<6>[   13.165890] pci 0000:00:15.1: Adding to iommu group 13
<6>[   13.165942] pci 0000:00:15.2: Adding to iommu group 13
<6>[   13.165998] pci 0000:00:15.3: Adding to iommu group 13
<6>[   13.166080] pci 0000:00:16.0: Adding to iommu group 14
<6>[   13.166152] pci 0000:00:1c.0: Adding to iommu group 15
<6>[   13.166247] pci 0000:00:1c.4: Adding to iommu group 16
<6>[   13.166375] pci 0000:00:1f.0: Adding to iommu group 17
<6>[   13.166431] pci 0000:00:1f.3: Adding to iommu group 17
<6>[   13.166488] pci 0000:00:1f.4: Adding to iommu group 17
<6>[   13.166546] pci 0000:00:1f.5: Adding to iommu group 17
<6>[   13.166602] pci 0000:00:1f.6: Adding to iommu group 17
<6>[   13.166678] pci 0000:7f:00.0: Adding to iommu group 18
<6>[   13.166780] pci 0000:80:00.0: Adding to iommu group 19
<6>[   13.180208] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[   13.180304] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[   13.180376] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[   13.186037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[   13.186273] clocksource: Switched to clocksource tsc
<6>[   13.186753] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[   13.192027] Initialise system trusted keyrings
<5>[   13.192126] Key type blacklist registered
<6>[   13.192538] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[   13.203126] zbud: loaded
<6>[   13.204524] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[   13.204669] ntfs3: Enabled Linux POSIX ACLs support
<6>[   13.204677] ntfs3: Read-only LZX/Xpress compression included
<5>[   13.205191] integrity: Platform Keyring initialized
<5>[   13.205216] integrity: Machine keyring initialized
<6>[   13.211441] xor: automatically using best checksumming function   avx       
<5>[   13.211452] Key type asymmetric registered
<5>[   13.211467] Asymmetric key parser 'x509' registered
<6>[   13.211606] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[   13.212157] io scheduler mq-deadline registered
<6>[   13.213097] ledtrig-cpu: registered to indicate activity on CPUs
<6>[   13.214674] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[   13.214981] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[   13.216191] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[   13.216450] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[   13.217623] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[   13.217912] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[   13.218983] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[   13.219231] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[   13.220677] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[   13.220989] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[   13.221555] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[   13.224385] Monitor-Mwait will be used to enter C-1 state
<7>[   13.224531] Monitor-Mwait will be used to enter C-2 state
<7>[   13.224583] Monitor-Mwait will be used to enter C-3 state
<6>[   13.230465] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[   13.230665] ACPI: button: Lid Switch [LID0]
<6>[   13.230924] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[   13.231101] ACPI: button: Sleep Button [SLPB]
<6>[   13.231305] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[   13.231725] ACPI: button: Power Button [PWRB]
<6>[   13.417592] thermal LNXTHERM:00: registered as thermal_zone0
<6>[   13.417677] ACPI: thermal: Thermal Zone [TZ00] (55 C)
<6>[   13.422804] ACPI: battery: Slot [BAT1] (battery absent)
<6>[   13.423775] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[   13.425050] ACPI: battery: Slot [BAT0] (battery present)
<6>[   13.448930] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[   13.471980] serial 0000:00:12.0: enabling device (0000 -> 0002)
<4>[   13.475414] hpet_acpi_add: no address or irqs in _CRS
<6>[   13.475506] Linux agpgart interface v0.103
<6>[   13.507050] ACPI: bus type drm_connector registered
<6>[   13.548247] loop: module loaded
<6>[   13.616884] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[   13.827842] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[   13.933111] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[   14.086919] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[   14.202380] Key type psk registered
<6>[   14.204752] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[   14.205654] tun: Universal TUN/TAP device driver, 1.6
<6>[   14.205800] nvme nvme0: pci function 0000:80:00.0
<6>[   14.206580] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   14.206694] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[   14.208706] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   14.211083] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   14.211118] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[   14.211141] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   14.211566] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   14.211589] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.211600] usb usb1: Product: xHCI Host Controller
<6>[   14.211607] usb usb1: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   14.211616] usb usb1: SerialNumber: 0000:00:0d.0
<6>[   14.214341] hub 1-0:1.0: USB hub found
<6>[   14.214431] hub 1-0:1.0: 1 port detected
<6>[   14.218163] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   14.218181] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.218192] usb usb2: Product: xHCI Host Controller
<6>[   14.218199] usb usb2: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   14.218208] usb usb2: SerialNumber: 0000:00:0d.0
<6>[   14.219722] hub 2-0:1.0: USB hub found
<6>[   14.219782] hub 2-0:1.0: 3 ports detected
<6>[   14.240955] nvme nvme0: 8/0/0 default/read/poll queues
<6>[   14.244079] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   14.244121] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[   14.246655] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   14.248978] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   14.249008] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[   14.249032] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   14.249301] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   14.249315] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.249325] usb usb3: Product: xHCI Host Controller
<6>[   14.249332] usb usb3: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   14.249341] usb usb3: SerialNumber: 0000:00:14.0
<6>[   14.250894] hub 3-0:1.0: USB hub found
<6>[   14.250953] hub 3-0:1.0: 8 ports detected
<6>[   14.254464]  nvme0n1: p1 p2
<6>[   14.280662] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   14.280685] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   14.280696] usb usb4: Product: xHCI Host Controller
<6>[   14.280703] usb usb4: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   14.280712] usb usb4: SerialNumber: 0000:00:14.0
<6>[   14.282118] hub 4-0:1.0: USB hub found
<6>[   14.282175] hub 4-0:1.0: 2 ports detected
<6>[   14.289593] usbcore: registered new interface driver usb-storage
<6>[   14.289754] usbcore: registered new interface driver usbserial_generic
<6>[   14.290200] usbserial: USB Serial support registered for generic
<6>[   14.290260] usbcore: registered new interface driver ftdi_sio
<6>[   14.290294] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[   14.290349] usbcore: registered new interface driver pl2303
<6>[   14.290394] usbserial: USB Serial support registered for pl2303
<6>[   14.290528] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[   14.290538] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[   15.002272] i8042: Can't read CTR while initializing i8042
<3>[   15.002285] i8042 i8042: probe with driver i8042 failed with error -5
<6>[   15.003716] mousedev: PS/2 mouse device common for all mice
<6>[   15.004829] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[   15.006618] rtc_cmos rtc_cmos: registered as rtc0
<6>[   15.006841] rtc_cmos rtc_cmos: setting system clock to 2025-03-15T09:46:38 UTC (1742031998)
<6>[   15.007004] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[   15.007056] i2c_dev: i2c /dev entries driver
<6>[   15.011757] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[   15.011775] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[   15.011786] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[   15.011837] device-mapper: uevent: version 1.0.3
<6>[   15.012299] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[   15.012422] platform eisa.0: Probing EISA bus 0
<4>[   15.012434] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[   15.012449] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[   15.012461] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[   15.012472] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[   15.012484] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[   15.012495] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[   15.012506] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[   15.012518] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[   15.012529] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[   15.012538] platform eisa.0: EISA: Detected 0 cards
<6>[   15.012547] intel_pstate: Intel P-state driver initializing
<6>[   15.016369] Hybrid CPU capacity scaling enabled
<6>[   15.017786] intel_pstate: HWP enabled
<6>[   15.017797] sdhci: Secure Digital Host Controller Interface driver
<6>[   15.017805] sdhci: Copyright(c) Pierre Ossman
<6>[   15.017956] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[   15.020763] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[   15.022130] drop_monitor: Initializing network drop monitor service
<6>[   15.022538] NET: Registered PF_INET6 protocol family
<6>[   15.028539] Segment Routing with IPv6
<6>[   15.028651] In-situ OAM (IOAM) with IPv6
<6>[   15.028758] NET: Registered PF_PACKET protocol family
<5>[   15.029416] Key type dns_resolver registered
<4>[   15.035927] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[   15.036734] microcode: Current revision: 0x0000011c
<6>[   15.037944] IPI shorthand broadcast: enabled
<6>[   15.055721] sched_clock: Marking stable (15045001167, 9811112)->(15139898566, -85086287)
<6>[   15.056903] registered taskstats version 1
<5>[   15.058336] Loading compiled-in X.509 certificates
<6>[   15.085222] Demotion targets for Node 0: null
<6>[   15.085515] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[   15.085522] kmemleak: Automatic memory scanning thread started
<5>[   15.085700] Key type .fscrypt registered
<5>[   15.085705] Key type fscrypt-provisioning registered
<6>[   15.088275] Btrfs loaded, zoned=yes, fsverity=yes
<5>[   15.088385] Key type trusted registered
<5>[   15.090327] Key type encrypted registered
<6>[   15.090334] AppArmor: AppArmor sha256 policy hashing enabled
<5>[   15.090402] Loading compiled-in module X.509 certificates
<5>[   15.091161] Loaded X.509 cert 'Build time autogenerated kernel key: a5b089a75eb368add3b09e7758283129b5a35066'
<6>[   15.091171] ima: Allocated hash algorithm: sha256
<6>[   15.109196] ima: No architecture policies found
<6>[   15.109339] evm: Initialising EVM extended attributes:
<6>[   15.109346] evm: security.selinux
<6>[   15.109350] evm: security.SMACK64
<6>[   15.109354] evm: security.SMACK64EXEC
<6>[   15.109358] evm: security.SMACK64TRANSMUTE
<6>[   15.109363] evm: security.SMACK64MMAP
<6>[   15.109368] evm: security.apparmor
<6>[   15.109372] evm: security.ima
<6>[   15.109375] evm: security.capability
<6>[   15.109380] evm: HMAC attrs: 0x1
<6>[   15.111777] PM:   Magic number: 1:298:778
<6>[   15.111998] printk: legacy console [netcon0] enabled
<6>[   15.112005] netconsole: network logging started
<6>[   15.112690] RAS: Correctable Errors collector initialized.
<6>[   15.112837] clk: Disabling unused clocks
<6>[   15.112848] PM: genpd: Disabling unused power domains
<6>[   15.113376] md: Waiting for all devices to be available before autodetect
<6>[   15.113382] md: If you don't use raid, use raid=noautodetect
<6>[   15.113387] md: Autodetecting RAID arrays.
<6>[   15.113395] md: autorun ...
<6>[   15.113398] md: ... autorun DONE.
<6>[   15.156363] EXT4-fs (nvme0n1p2): mounted filesystem ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 ro with ordered data mode. Quota mode: none.
<6>[   15.156432] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[   15.157059] devtmpfs: mounted
<6>[   15.167472] Freeing unused decrypted memory: 2028K
<6>[   15.168370] Freeing unused kernel image (initmem) memory: 5624K
<6>[   15.168391] Write protecting the kernel read-only data: 34816k
<6>[   15.168970] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[   15.169383] Freeing unused kernel image (rodata/data gap) memory: 964K
<6>[   15.174502] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[   15.174526] Run /sbin/init as init process
<7>[   15.174530]   with arguments:
<7>[   15.174532]     /sbin/init
<7>[   15.174532]   with environment:
<7>[   15.174533]     HOME=/
<7>[   15.174534]     TERM=linux
<7>[   15.174534]     BOOT_IMAGE=/boot/drm_intel
<7>[   15.228107] systemd[1]: Inserted module 'autofs4'
<7>[   15.245832] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[   15.245875] systemd[1]: Detected architecture x86-64.
<7>[   15.246959] systemd[1]: Hostname set to <shard-lnl-1>.
<7>[   15.488779] systemd[1]: Queued start job for default target graphical.target.
<7>[   15.522001] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[   15.523941] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[   15.525217] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[   15.525476] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[   15.526112] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[   15.526225] systemd[1]: Expecting device dev-disk-by\x2duuid-47B0\x2dB6FF.device - /dev/disk/by-uuid/47B0-B6FF...
<7>[   15.526303] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[   15.526377] systemd[1]: Reached target slices.target - Slice Units.
<7>[   15.526447] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[   15.526512] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[   15.526579] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[   15.526864] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[   15.527516] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[   15.527826] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[   15.528166] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[   15.528439] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[   15.528641] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[   15.529024] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[   15.529333] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[   15.529603] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[   15.529774] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.530057] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[   15.530298] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[   15.533487] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[   15.535933] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[   15.538479] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[   15.541190] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[   15.546822] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[   15.550023] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[   15.553800] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[   15.556995] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[   15.560130] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[   15.562982] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[   15.566161] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[   15.569132] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[   15.574175] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[   15.576518] systemd-journald[213]: Collecting audit messages is disabled.
<7>[   15.579290] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[   15.584518] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[   15.584723] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[   15.590114] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[   15.592149] pstore: Using crash dump compression: deflate
<6>[   15.597184] pstore: Registered efi_pstore as persistent store backend
<7>[   15.599033] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[   15.599149] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.599225] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   15.602724] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[   15.604595] fuse: init (API version 7.42)
<7>[   15.609321] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[   15.751709] EXT4-fs (nvme0n1p2): re-mounted ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 r/w. Quota mode: none.
<6>[   15.781481] Adding 8388604k swap on /swap.img.  Priority:-2 extents:52 across:429129728k SS
<7>[   15.793662] systemd-journald[213]: Received client request to flush runtime journal.
<7>[   15.812016] systemd-journald[213]: /var/log/journal/834d840f209d4e2294628ae19454e8da/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[   15.812037] systemd-journald[213]: Rotating system journal.
<4>[   16.486548] nvme nvme0: using unchecked data buffer
<6>[   16.610761] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[   16.632573] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632601] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632623] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632647] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632672] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632696] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632721] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632746] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632770] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632795] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632849] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632868] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632892] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632917] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632942] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632966] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.632991] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633027] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633052] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633076] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633101] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633125] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633150] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633174] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633199] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633227] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633248] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633291] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633311] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633336] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633360] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633385] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633420] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633444] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633468] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633493] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633517] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.633542] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.657021] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<4>[   16.663424] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663448] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663472] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663497] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663522] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663546] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663583] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663607] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663844] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663915] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663950] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.663998] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664119] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664132] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664144] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664160] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664185] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664197] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664210] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664222] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664235] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664247] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664260] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664272] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664285] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664297] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664310] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664322] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664335] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.664347] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.668047] intel-hid INTC107B:00: platform supports 5 button array
<4>[   16.672767] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring
<6>[   16.679634] pci 0000:00:05.0: Setting to D3hot
<6>[   16.684084] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[   16.691047] pci 0000:00:0b.0: Setting to D3hot
<4>[   16.699175] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699194] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699214] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699226] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699239] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699251] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699264] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699327] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699347] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699367] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699380] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699392] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699405] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699417] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699430] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699442] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699455] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699467] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699488] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699501] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699513] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699526] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699553] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699573] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699586] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699612] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699624] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699636] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699649] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699663] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699676] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699688] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699701] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699713] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699726] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699738] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699751] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699763] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.699776] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.703788] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[   16.704088] intel_pmc_core INT33A1:00:  initialized
<4>[   16.787579] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.787603] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<3>[   16.802141] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[   16.816980] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<4>[   16.822973] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.822996] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823016] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823036] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823056] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823076] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823096] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823116] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823136] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823179] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823199] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823239] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823259] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823291] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823310] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823330] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823350] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823376] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823398] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823419] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823439] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823461] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823481] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823501] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823521] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823554] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823597] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823617] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823637] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823671] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823691] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823711] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823731] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823751] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823771] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823791] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.823811] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.824085] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.824104] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.824124] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.824144] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.824164] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.824184] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.824204] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.824224] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[   16.844669] audit: type=1400 audit(1742032000.336:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=432 comm="apparmor_parser"
<5>[   16.847392] audit: type=1400 audit(1742032000.339:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=433 comm="apparmor_parser"
<5>[   16.848489] audit: type=1400 audit(1742032000.340:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=434 comm="apparmor_parser"
<5>[   16.849490] audit: type=1400 audit(1742032000.341:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=436 comm="apparmor_parser"
<5>[   16.850448] audit: type=1400 audit(1742032000.342:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=438 comm="apparmor_parser"
<5>[   16.850704] audit: type=1400 audit(1742032000.342:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=435 comm="apparmor_parser"
<5>[   16.854424] audit: type=1400 audit(1742032000.346:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=439 comm="apparmor_parser"
<5>[   16.857383] audit: type=1400 audit(1742032000.349:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=441 comm="apparmor_parser"
<5>[   16.859777] audit: type=1400 audit(1742032000.351:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=440 comm="apparmor_parser"
<5>[   16.861560] audit: type=1400 audit(1742032000.353:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=442 comm="apparmor_parser"
<6>[   17.155524] ACPI: bus type thunderbolt registered
<6>[   17.197699] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[   17.210373] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[   17.213356] e1000e: Intel(R) PRO/1000 Network Driver
<6>[   17.213360] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[   17.215862] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[   17.221861] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[   17.222050] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[   17.227404] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[   17.227412] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[   17.244423] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[   17.271261] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[   17.315256] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[   17.336047] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[   17.340081] intel_rapl_common: Found RAPL domain package
<6>[   17.340086] intel_rapl_common: Found RAPL domain dram
<6>[   17.349546] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[   17.369259] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[   17.404419] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[   17.406110] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[   17.406115] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[   17.406117] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[   17.406118] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[   17.406119] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[   17.406120] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[   17.460727] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 9c:a2:f4:61:fe:e9, XID 541, IRQ 176
<6>[   17.460737] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[   17.466004] cryptd: max_cpu_qlen set to 1000
<6>[   17.547613] AES CTR mode by8 optimization enabled
<6>[   17.634832] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<4>[   17.644886] block nvme0n1: No UUID available providing old NGUID
<6>[   17.747083] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:30:89
<6>[   17.747089] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[   17.750610] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[   17.904115] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[   17.929252] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[   17.929257] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[   17.929259] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[   18.069784] evm: overlay not supported
<6>[   18.148591] intel_rapl_common: Found RAPL domain package
<6>[   18.148597] intel_rapl_common: Found RAPL domain core
<6>[   18.148914] intel_rapl_common: Found RAPL domain uncore
<6>[   18.149190] intel_rapl_common: Found RAPL domain dram
<6>[   18.149193] intel_rapl_common: Found RAPL domain psys
<4>[   18.202438] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[   18.357929] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<5>[   18.373761] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[   18.373784] 0x000000000000-0x000002000000 : "BIOS"
<6>[   18.377106] loop0: detected capacity change from 0 to 8
<6>[   18.433006] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[   18.565402] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[   18.685574] Consider using thermal netlink events interface
<6>[   18.724176] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[   18.928340] hid: raw HID events driver (C) Jiri Kosina
<6>[   18.934545] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[   18.972162] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.973440] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.974765] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.977046] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.978206] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.978788] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.984793] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.989027] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.993600] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.997583] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   19.000739] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.003451] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   20.005044] typec port0: bound usb3-port1 (ops connector_ops)
<6>[   20.005097] typec port0: bound usb2-port1 (ops connector_ops)
<6>[   20.988893] typec port1: bound usb3-port2 (ops connector_ops)
<6>[   20.988928] typec port1: bound usb2-port2 (ops connector_ops)
<6>[   23.537786] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<4>[   29.299251] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<7>[   34.839175] systemd-journald[213]: /var/log/journal/834d840f209d4e2294628ae19454e8da/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[   50.905788] [IGT] xe_module_load: executing
<7>[   50.917438] [IGT] xe_module_load: starting subtest load
<5>[   51.114881] Setting dangerous option force_probe - tainting kernel
<6>[   51.117700] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[   51.119414] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[   51.119427] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE  64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[   51.119553] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[   51.119642] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[   51.124960] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[   51.128971] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[   51.129080] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[   51.129160] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[   51.129232] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   51.129298] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[   51.129363] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   51.129426] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   51.129486] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   51.129546] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   51.129604] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   51.129661] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   51.129716] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   51.129770] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   51.129832] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   51.129892] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   51.130010] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[   51.131192] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   51.131268] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   51.140890] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   51.141848] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   51.141962] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[   51.142100] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000ef
<7>[   51.142201] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,000000ef
<7>[   51.142307] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     000000ff
<7>[   51.142413] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   51.142512] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,000000ff
<6>[   51.143225] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[   51.147334] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[   51.147442] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   51.147529] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[   51.147611] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   51.147690] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[   51.147769] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   51.147864] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   51.147942] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   51.148018] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   51.148094] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   51.148170] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   51.148249] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   51.148326] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   51.148402] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[   51.150437] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[   51.154453] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1345
<6>[   51.155691] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[   51.155901] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   51.156146] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[   51.158196] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   51.158434] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   51.178191] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   51.178636] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   51.178836] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[   51.179023] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[   51.179192] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,00000000
<7>[   51.179386] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     00000000
<7>[   51.179564] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   51.179747] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,0000000f
<7>[   51.180482] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[   51.180871] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[   51.181195] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6feec018
<7>[   51.181517] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[   51.181782] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[   51.182050] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[   51.182289] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[   51.182544] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[   51.182826] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[   51.183057] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[   51.183384] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[   51.183676] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[   51.183973] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[   51.184261] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[   51.184596] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[   51.184922] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[   51.185190] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[   51.185450] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[   51.185718] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.185970] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.186197] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[   51.186419] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.186644] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.186865] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.187078] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[   51.187285] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.187478] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.187665] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.187858] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[   51.188059] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.188232] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.188400] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.188562] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[   51.188722] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.188925] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.189086] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.189247] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[   51.189406] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   51.189555] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   51.189702] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   51.189858] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[   51.190631] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[   51.190894] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE      ", BDB version 260
<7>[   51.191102] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[   51.191317] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[   51.191509] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[   51.191709] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[   51.191903] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[   51.192070] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[   51.192227] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[   51.192404] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[   51.192600] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[   51.192764] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[   51.192946] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[   51.193115] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[   51.193288] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[   51.193468] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[   51.193685] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[   51.193910] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[   51.194131] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[   51.194337] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.194530] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.194722] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   51.194932] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[   51.195112] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[   51.195291] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.195470] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.195646] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   51.195880] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[   51.196184] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   51.196553] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[   51.196852] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   51.197161] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[   51.197517] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[   51.197838] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[   51.198110] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   51.198358] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   51.198644] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[   51.198907] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[   51.198959] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[   51.199291] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[   51.199575] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[   51.199826] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[   51.200841] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[   51.201192] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[   51.203537] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[   51.203798] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[   51.204024] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[   51.204211] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[   51.204223] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[   51.204383] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[   51.204432] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x8f074 = 0x86fc0
<7>[   51.204551] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[   51.204626] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[   51.204713] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[   51.204811] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[   51.204875] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[   51.205001] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[   51.205163] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[   51.205327] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[   51.205476] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f074 = 0x97fc0
<7>[   51.205624] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.205769] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[   51.205925] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.206060] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[   51.206188] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.206312] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[   51.206441] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[   51.206565] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f474 = 0x9ffc0
<7>[   51.206686] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.206799] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[   51.206928] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.207039] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[   51.207148] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.207260] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[   51.207380] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[   51.207488] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f874 = 0x547c0
<7>[   51.207594] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   51.207697] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[   51.207795] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   51.207908] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[   51.208000] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   51.208090] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[   51.214048] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<6>[   51.219000] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[   51.219043] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   51.219339] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[   51.219615] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[   51.219937] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[   51.220297] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[   51.221191] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[   51.221511] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[   51.221772] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[   51.222130] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[   51.222436] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[   51.222686] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[   51.222954] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[   51.223200] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[   51.223446] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[   51.223745] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[   51.224098] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   51.224350] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   51.224592] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   51.225082] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   51.225316] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   51.225593] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   51.225974] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   51.227544] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   51.227826] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[   51.230362] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   51.231043] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID  HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[   51.232014] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[   51.233745] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[   51.235256] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[   51.237980] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   51.248932] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   51.249191] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.249195] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.249198] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   51.249204] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.249207] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   51.249217] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.249219] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   51.249224] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.249363] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.249366] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.249368] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.249385] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   51.250340] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[   51.250926] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[   51.251119] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[   51.251375] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[   51.251621] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[   51.251860] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   51.251963] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   51.252045] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   51.252120] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   51.252191] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   51.252291] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   51.252505] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[   51.252691] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   51.252845] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[   51.253283] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[   51.253414] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   51.253539] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[   51.253832] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[   51.253955] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   51.254079] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[   51.254643] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[   51.254788] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[   51.254920] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[   51.254998] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[   51.255071] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[   51.255141] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[   51.255211] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[   51.255279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[   51.255347] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[   51.255415] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[   51.255483] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[   51.255551] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[   51.255619] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[   51.255687] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[   51.255756] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[   51.255832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[   51.255904] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[   51.255972] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[   51.256039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[   51.256106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[   51.256174] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[   51.256968] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[   51.257089] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[   51.257187] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[   51.257282] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[   51.257361] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[   51.257433] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[   51.257503] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[   51.257576] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[   51.257655] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[   51.257727] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[   51.257795] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[   51.257868] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[   51.257938] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[   51.258013] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[   51.258082] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[   51.258147] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[   51.258211] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[   51.258312] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[   51.258386] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[   51.258455] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[   51.258523] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[   51.258759] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[   51.258845] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[   51.258912] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[   51.258976] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[   51.259039] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[   51.259103] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[   51.259166] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[   51.259228] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[   51.259291] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[   51.259355] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[   51.259417] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[   51.259480] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[   51.259542] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[   51.259605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[   51.259667] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[   51.259730] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[   51.259792] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[   51.259860] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[   51.260075] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[   51.260162] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   51.260237] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   51.260307] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1
<7>[   51.260425] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7>[   51.260526] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7>[   51.260660] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[   51.260757] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[   51.260960] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[   51.261063] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   51.261152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[   51.261233] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   51.261311] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   51.261389] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   51.261463] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   51.261537] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[   51.261610] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   51.261683] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   51.261755] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   51.261837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[   51.261912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   51.261986] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[   51.262059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   51.262136] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[   51.262209] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[   51.262282] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   51.262354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   51.262426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   51.262497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   51.262571] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   51.262644] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   51.262716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   51.262787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   51.262864] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   51.262936] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   51.263008] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   51.263078] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[   51.263150] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[   51.263221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   51.263292] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   51.263363] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.263435] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.263506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.263576] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   51.263646] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   51.263717] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.263787] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.263867] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.263940] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   51.264012] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[   51.264084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[   51.264394] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[   51.264501] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[   51.282040] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[   51.353260] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[   51.496966] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[   51.496970] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[   51.496971] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[   51.497091] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[   51.497279] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   51.497369] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   51.497449] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   51.497546] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[   51.497636] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[   51.497736] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[   51.497808] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   51.497905] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   51.497977] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   51.498859] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[   51.498956] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[   51.499040] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[   51.499120] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[   51.499193] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[   51.499262] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[   51.499332] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[   51.499405] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[   51.499475] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[   51.499541] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[   51.499607] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[   51.499671] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[   51.499734] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[   51.499795] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[   51.499864] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[   51.499929] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[   51.500004] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[   51.500079] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[   51.500152] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[   51.500225] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[   51.500283] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[   51.500340] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[   51.500399] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[   51.500457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[   51.500514] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[   51.500569] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[   51.500632] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[   51.500695] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[   51.500758] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[   51.500822] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[   51.500894] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[   51.500972] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[   51.501050] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[   51.501125] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[   51.501186] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[   51.501245] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[   51.501310] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[   51.501374] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[   51.501628] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[   51.501698] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[   51.501761] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[   51.502098] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[   51.502176] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[   51.502237] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[   51.502474] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[   51.502527] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[   51.502578] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[   51.502629] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[   51.502678] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[   51.502727] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[   51.503181] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[   51.503252] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[   51.503314] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[   51.503373] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   51.503429] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[   51.503484] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   51.503538] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   51.503591] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   51.503643] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   51.503695] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   51.503745] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   51.503796] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   51.503864] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   51.503930] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   51.504015] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[   51.504304] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[   51.506633] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[   51.519715] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[   51.520472] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   51.520544] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   51.529884] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   51.530252] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   51.531129] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[   51.531215] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[   51.531292] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[   51.531363] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[   51.531433] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[   51.531501] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[   51.531566] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[   51.531633] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[   51.531701] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7>[   51.535005] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[   51.535116] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7>[   51.535222] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[   51.536917] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[   51.542037] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[   51.542040] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[   51.542041] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[   51.542042] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[   51.542043] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[   51.542044] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[   51.542045] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[   51.542046] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[   51.542047] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[   51.542048] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[   51.542076] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[   51.542203] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[   51.542301] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[   51.542974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[   51.543083] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[   51.543193] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[   51.543291] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[   51.543372] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[   51.543452] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[   51.543533] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[   51.543615] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[   51.543688] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[   51.543760] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[   51.543843] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[   51.543936] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[   51.544028] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[   51.544116] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[   51.544188] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[   51.544254] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[   51.544320] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[   51.544385] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[   51.544454] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[   51.544522] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[   51.544590] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[   51.544656] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[   51.544718] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[   51.544778] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[   51.544847] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[   51.544926] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[   51.545006] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[   51.545090] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[   51.545177] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[   51.545254] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[   51.546006] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[   51.546119] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[   51.546541] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[   51.546613] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[   51.547144] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[   51.547220] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   51.547282] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[   51.547343] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   51.547401] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[   51.547458] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   51.547515] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   51.547570] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   51.547624] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   51.547678] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   51.547731] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   51.547784] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   51.547853] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   51.547924] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[   51.548014] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[   51.548118] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[   51.565738] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[   51.566896] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   51.566997] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[   51.567075] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   51.586868] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   51.587365] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   51.588665] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   51.592294] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   51.595265] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   51.638865] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[   51.641082] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[   51.641593] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[   51.641930] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb (   0 -    0) -> (4054 - 4096), size    0 ->   42
<7>[   51.642203] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   51.642501] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   51.642789] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   51.643115] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   51.643385] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   51.645007] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[   51.645359] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[   51.645602] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[   51.650945] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[   51.660513] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[   51.666221] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[   51.666948] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[   51.669217] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[   51.669319] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[   51.669849] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[   51.670664] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[   51.670708] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[   51.671121] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[   51.671759] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[   51.671807] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[   51.672178] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[   51.672678] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[   51.672702] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[   51.672726] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[   51.680420] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
<6>[   51.682983] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[   51.683799] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[   51.684008] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[   51.684403] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[   51.685572] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[   51.685659] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[   51.685741] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[   51.685828] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[   51.686051] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   51.686269] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   51.686283] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   51.686906] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   51.687439] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   51.687587] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   51.687720] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   51.687971] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   51.687976] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.687978] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.687979] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   51.687982] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.687983] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   51.687987] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.687988] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   51.687991] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.688012] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   51.688123] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   51.688787] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   51.688912] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   51.689961] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[   51.690377] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.690380] [drm] DisplayID checksum invalid, remainder is 248
<5>[   51.690381] [drm] DisplayID checksum invalid, remainder is 248
<7>[   51.690409] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   51.690421] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   51.690431] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   51.690439] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   51.690602] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   51.690723] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected
<7>[   51.690733] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   51.690741] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   51.690748] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   51.690893] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   51.691016] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected
<7>[   51.691027] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   51.691035] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   51.691043] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   51.691172] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   51.691273] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected
<7>[   51.691281] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   51.691288] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   51.691290] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   51.691292] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   51.691294] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   51.691371] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   51.691385] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[   51.691386] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[   51.691400] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   51.691464] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[   51.691490] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<7>[   51.691493] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   51.691686] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   51.691811] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   51.692251] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[   51.698839] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01d97000
<6>[   51.699677] fbcon: xedrmfb (fb0) is primary device
<7>[   51.700566] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[   51.700692] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[   51.700802] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[   51.700947] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[   51.701073] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[   51.701201] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[   51.701317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[   51.701419] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[   51.701522] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, 
<7>[   51.701625] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[   51.701727] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[   51.701851] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   51.701972] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   51.702086] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[   51.702197] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   51.702298] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   51.702379] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   51.702459] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[   51.702538] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[   51.702625] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, 
<7>[   51.702703] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[   51.702779] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   51.702873] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   51.702972] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[   51.703067] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   51.703155] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   51.703229] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   51.703300] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[   51.703371] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[   51.703455] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[   51.703538] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[   51.703663] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 -    0) -> (   0 - 4054), size    0 -> 4054
<7>[   51.703754] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[   51.703851] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   lines    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    1,  12,  12,  12,  11,  12,   0,   0,   0,   3,    0
<7>[   51.703965] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]  blocks    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   24, 289, 289, 289, 265, 289,   0,   0,  38,  73,   87
<7>[   51.704062] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   28, 319, 319, 319, 293, 319,   0,   0,  39,  82,   88
<7>[   51.704151] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   51.704221] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704290] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704358] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704425] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   51.704491] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704557] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704622] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704686] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   51.704748] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704811] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704905] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.704987] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   51.705068] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.705145] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.705212] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.705274] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   51.705334] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.705395] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.705457] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   51.705524] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[   51.705615] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   51.705702] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   51.705787] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   51.705892] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   51.705999] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   51.706121] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[   51.706250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[   51.706345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   51.706436] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[   51.706517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   51.706598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   51.706679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   51.706759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   51.706843] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[   51.706945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   51.707045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   51.707138] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   51.707212] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[   51.707285] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   51.707357] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[   51.707427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[   51.707498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     pixelformat: RGB
<7>[   51.707567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     colorimetry: sRGB
<7>[   51.707636] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     bpc: 0
<7>[   51.707703] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     dynamic range: VESA range
<7>[   51.707770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     content type: Not defined
<7>[   51.707846] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   51.707932] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[   51.708019] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[   51.708106] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   51.708181] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   51.708250] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   51.708321] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   51.708393] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   51.708464] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   51.708532] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   51.708601] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   51.708667] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   51.708732] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   51.708795] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   51.708902] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[   51.708993] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[   51.709084] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   51.709166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   51.709238] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.709300] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.709360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.709420] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   51.709480] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   51.709545] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.709613] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.709681] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   51.709747] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   51.709813] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[   51.709909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[   51.709996] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[   51.710081] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[   51.710163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[   51.710244] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[   51.710310] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[   51.710375] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[   51.711109] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] 
<6>[   51.745387] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[   51.745917] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[   51.768874] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[   51.912976] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[   51.913700] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[   51.919570] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[   51.919642] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   51.919892] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[   51.919961] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   51.920252] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[   51.972770] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   51.973094] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   52.003073] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   52.003527] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[   52.004638] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.004670] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[   52.004989] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[   52.005016] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.005272] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[   52.005517] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[   52.005766] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[   52.006031] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[   52.006321] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[   52.006557] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[   52.006795] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[   52.007073] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[   52.007368] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[   52.007594] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[   52.007810] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[   52.008061] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[   52.008366] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   52.008452] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   52.008764] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   52.009055] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[   52.009383] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.009973] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[   52.010295] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (494 ms remaining)
<7>[   52.181071] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[   52.513141] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x00000000 PP_CONTROL: 0x00000060
<7>[   52.513496] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   52.513767] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[   52.514089] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[   52.550374] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   52.550769] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   52.551134] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[   52.551528] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   52.713760] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   52.713756] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   52.713886] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   52.842192] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   52.844986] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   52.845307] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[   52.848592] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   52.849924] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[   52.851351] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[   52.852861] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[   52.854162] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[   52.855588] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[   52.856006] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[   52.857791] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[   52.858194] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[   52.858922] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[   52.859504] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] 
<7>[   52.859915] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[   52.860351] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[   52.862491] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[   52.862515] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[   52.862924] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[   52.876330] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[   52.878835] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[   52.879227] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[   52.880628] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[   52.883166] Console: switching to colour frame buffer device 180x56
<6>[   52.897805] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[   52.921025] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[   52.921384] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[   52.921666] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[   52.921965] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[   52.922216] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[   52.922480] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[   52.922704] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[   52.922947] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[   52.923158] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[   52.923377] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[   52.923579] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[   52.923776] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[   52.924002] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[   52.924215] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[   52.924406] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[   52.924590] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[   52.924769] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[   52.925024] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[   52.925228] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[   52.925425] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[   52.925617] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[   52.925830] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[   52.926269] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] 
<7>[   52.926313] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   52.927125] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   52.927360] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   52.928169] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[   52.928483] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[   52.928784] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[   52.929205] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[   52.929597] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[   52.929980] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   52.930333] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   52.930674] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   52.930959] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   52.931372] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   52.932201] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   52.932512] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   52.932810] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   52.933494] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   52.933512] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.933517] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.933520] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   52.933527] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.933531] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   52.933542] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.933546] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   52.933553] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.933599] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   52.933882] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   52.934793] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   52.935099] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   52.935623] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[   52.936692] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.936699] [drm] DisplayID checksum invalid, remainder is 248
<5>[   52.936703] [drm] DisplayID checksum invalid, remainder is 248
<7>[   52.936795] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   52.936918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   52.936942] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   52.936965] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   52.937329] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.937649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   52.937676] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   52.937697] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   52.938013] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.938235] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   52.938258] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   52.938279] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   52.938550] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   52.938773] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   52.938793] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   52.938801] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   52.938805] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   52.938809] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   52.938946] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[   52.939081] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   52.939120] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[   52.939126] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[   52.939360] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   52.943068] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   52.943429] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[   52.962337] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<6>[   52.962345] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[   52.964467] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[   52.965564] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[   52.978143] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[   52.978444] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[   52.978734] [IGT] xe_module_load: exiting, ret=0
<7>[   53.026087] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.026369] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.026615] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.026834] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   53.027045] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.027247] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.027468] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.027665] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   53.028028] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.028239] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.028443] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.028690] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   53.028923] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.029123] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.029348] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.029533] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   53.029718] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.029925] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.030146] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.030354] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   53.030541] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.030736] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.030946] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.031130] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   53.031310] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.031491] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.031702] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.031921] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   53.032107] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.032276] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.032440] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.032602] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   53.032765] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.032949] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.033110] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.033270] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   53.041490] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   53.042178] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   53.042347] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<6>[   53.057177] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[   53.068070] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[   53.069173] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[   53.070777] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[   53.103630] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[   53.103757] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[   53.993162] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.993246] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   53.993338] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   54.121801] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   55.467174] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[   55.467666] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067