<5>[    0.000000] Linux version 6.14.0-rc6-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Mar 14 19:05:34 UTC 2025
<6>[    0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[    0.000000] KERNEL supported cpus:
<6>[    0.000000]   Intel GenuineIntel
<6>[    0.000000]   AMD AuthenticAMD
<6>[    0.000000]   Hygon HygonGenuine
<6>[    0.000000]   Centaur CentaurHauls
<6>[    0.000000]   zhaoxin   Shanghai  
<6>[    0.000000] x86/tme: not enabled by BIOS
<6>[    0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[    0.000000] BIOS-provided physical RAM map:
<6>[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[    0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[    0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[    0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved
<6>[    0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable
<6>[    0.000000] NX (Execute Disable) protection: active
<6>[    0.000000] APIC: Static calls initialized
<6>[    0.000000] efi: EFI v2.7 by Intel
<6>[    0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fef5000 SMBIOS=0x6cbc7000 MEMATTR=0x68f39018 ESRT=0x68f71098 MOKvar=0x6cd0c000 TPMEventLog=0x6ff5a018 
<6>[    0.000000] efi: Remove mem254: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[    0.000000] efi: Remove mem256: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[    0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[    0.000000] SMBIOS 3.8 present.
<6>[    0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D86.2501240726 01/24/2025
<6>[    0.000000] DMI: Memory slots populated: 8/8
<6>[    0.000000] tsc: Detected 3100.000 MHz processor
<6>[    0.000000] tsc: Detected 3110.400 MHz TSC
<7>[    0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[    0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[    0.000013] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[    0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[    0.000018] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
<6>[    0.000376] x2apic: enabled by BIOS, switching to x2apic ops
<6>[    0.000377] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[    0.004650] esrt: Reserving ESRT space from 0x0000000068f71098 to 0x0000000068f711e8.
<7>[    0.004657] e820: update [mem 0x68f71000-0x68f71fff] usable ==> reserved
<6>[    0.004675] Using GB pages for direct mapping
<6>[    0.005352] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[    0.005353] printk: early log buf free: 258888(98%)
<6>[    0.005354] Secure boot disabled
<6>[    0.005355] ACPI: Early table checksum verification disabled
<6>[    0.005359] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[    0.005361] ACPI: XSDT 0x000000006FF71228 0001A4 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005365] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL  LNL      00000002      01000013)
<6>[    0.005368] ACPI: DSDT 0x000000006FFB6000 0254DE (v02 INTEL  LNL      00000002      01000013)
<6>[    0.005369] ACPI: FACS 0x000000006FED9000 000040
<6>[    0.005371] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[    0.005372] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef  Cpu0Ist  00003000 INTL 20210930)
<6>[    0.005373] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef  Cpu0Hwp  00003000 INTL 20210930)
<6>[    0.005375] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef  Cpu0Psd  00003000 INTL 20210930)
<6>[    0.005376] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef  Cpu0Cst  00003001 INTL 20210930)
<6>[    0.005377] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef  ApIst    00003000 INTL 20210930)
<6>[    0.005379] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef  ApHwp    00003000 INTL 20210930)
<6>[    0.005380] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef  ApPsd    00003000 INTL 20210930)
<6>[    0.005381] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef  ApCst    00003000 INTL 20210930)
<6>[    0.005383] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt  00003000 INTL 20210930)
<6>[    0.005384] ACPI: DTPR 0x000000006FFEC000 000090 (v01                 00000000      00000000)
<6>[    0.005385] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL  PDatTabl 00001000 INTL 20210930)
<6>[    0.005387] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL  IgfxSsdt 00003000 INTL 20210930)
<6>[    0.005388] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL  TseSsdt  00001000 INTL 20210930)
<6>[    0.005389] ACPI: SSDT 0x000000006FFDD000 009156 (v02 INTEL  TcssSsdt 00001000 INTL 20210930)
<6>[    0.005390] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL  IpuSsdt  00001000 INTL 20210930)
<6>[    0.005392] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL  LnlMRvp1 00001000 INTL 20210930)
<6>[    0.005393] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL  I2Pm_Rvp 00001000 INTL 20210930)
<6>[    0.005394] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL  Ther_Rvp 00001000 INTL 20210930)
<6>[    0.005395] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005397] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005398] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL  LNL      00000000      01000013)
<6>[    0.005399] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005401] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL  PepoSsdt 00001000 INTL 20210930)
<6>[    0.005402] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[    0.005403] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[    0.005404] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL  Cnv_Ssdt 00001000 INTL 20210930)
<6>[    0.005406] ACPI: SSDT 0x000000006FF85000 00060E (v02 INTEL  Tpm2Tabl 00001000 INTL 20210930)
<6>[    0.005407] ACPI: TPM2 0x000000006FF84000 00004C (v04 INTEL  LNL      00000002      01000013)
<6>[    0.005408] ACPI: LPIT 0x000000006FF83000 0000CC (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005410] ACPI: SSDT 0x000000006FF82000 000D5C (v02 INTEL  PtidDevc 00001000 INTL 20210930)
<6>[    0.005411] ACPI: SSDT 0x000000006FF81000 0001F0 (v02 INTEL  TbtTypeC 00000000 INTL 20210930)
<6>[    0.005412] ACPI: DBGP 0x000000006FF80000 000034 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005413] ACPI: DBG2 0x000000006FF7F000 000054 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005415] ACPI: NHLT 0x000000006FF7E000 0002E3 (v00 INTEL  LNL      00000002      01000013)
<6>[    0.005416] ACPI: SSDT 0x000000006FF7C000 00115C (v02 INTEL  UsbCTabl 00001000 INTL 20210930)
<6>[    0.005417] ACPI: SSDT 0x000000006FF75000 00653B (v02 INTEL  EcSsdt   00000000 INTL 20210930)
<6>[    0.005418] ACPI: ECDT 0x000000006FF74000 000069 (v01        LNL      00000002      01000013)
<6>[    0.005420] ACPI: DMAR 0x000000006FF73000 0000D8 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005421] ACPI: FPDT 0x000000006FF72000 000044 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005422] ACPI: SSDT 0x000000006FFA8000 00086D (v02 INTEL  xh_lnl_m 00000000 INTL 20210930)
<6>[    0.005424] ACPI: SSDT 0x000000006FF6F000 0013DB (v02 SocGpe SocGpe   00003000 INTL 20210930)
<6>[    0.005425] ACPI: SSDT 0x000000006FF6C000 002463 (v02 SocCmn SocCmn   00003000 INTL 20210930)
<6>[    0.005426] ACPI: SDEV 0x000000006FF6B000 000046 (v01                 00000000      00000000)
<6>[    0.005428] ACPI: SSDT 0x000000006FF60000 00A4FA (v02 INTEL  St09Ssdt 00001000 INTL 20210930)
<6>[    0.005429] ACPI: PHAT 0x000000006FF5F000 0007C0 (v01 INTEL  LNL      00000005 MSFT 0100000D)
<6>[    0.005430] ACPI: BGRT 0x000000006FF5E000 000038 (v01 INTEL  LNL      00000002      01000013)
<6>[    0.005431] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113]
<6>[    0.005432] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb4dd]
<6>[    0.005433] ACPI: Reserving FACS table memory at [mem 0x6fed9000-0x6fed903f]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[    0.005433] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[    0.005434] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[    0.005435] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[    0.005435] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[    0.005435] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[    0.005435] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[    0.005436] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[    0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6155]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df]
<6>[    0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2]
<6>[    0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e]
<6>[    0.005438] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955]
<6>[    0.005438] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037]
<6>[    0.005439] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[    0.005439] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7]
<6>[    0.005439] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b]
<6>[    0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2]
<6>[    0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320]
<6>[    0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469]
<6>[    0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815]
<6>[    0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff85000-0x6ff8560d]
<6>[    0.005441] ACPI: Reserving TPM2 table memory at [mem 0x6ff84000-0x6ff8404b]
<6>[    0.005441] ACPI: Reserving LPIT table memory at [mem 0x6ff83000-0x6ff830cb]
<6>[    0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff82d5b]
<6>[    0.005442] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff811ef]
<6>[    0.005442] ACPI: Reserving DBGP table memory at [mem 0x6ff80000-0x6ff80033]
<6>[    0.005442] ACPI: Reserving DBG2 table memory at [mem 0x6ff7f000-0x6ff7f053]
<6>[    0.005442] ACPI: Reserving NHLT table memory at [mem 0x6ff7e000-0x6ff7e2e2]
<6>[    0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ff7c000-0x6ff7d15b]
<6>[    0.005443] ACPI: Reserving SSDT table memory at [mem 0x6ff75000-0x6ff7b53a]
<6>[    0.005443] ACPI: Reserving ECDT table memory at [mem 0x6ff74000-0x6ff74068]
<6>[    0.005444] ACPI: Reserving DMAR table memory at [mem 0x6ff73000-0x6ff730d7]
<6>[    0.005444] ACPI: Reserving FPDT table memory at [mem 0x6ff72000-0x6ff72043]
<6>[    0.005444] ACPI: Reserving SSDT table memory at [mem 0x6ffa8000-0x6ffa886c]
<6>[    0.005444] ACPI: Reserving SSDT table memory at [mem 0x6ff6f000-0x6ff703da]
<6>[    0.005445] ACPI: Reserving SSDT table memory at [mem 0x6ff6c000-0x6ff6e462]
<6>[    0.005445] ACPI: Reserving SDEV table memory at [mem 0x6ff6b000-0x6ff6b045]
<6>[    0.005445] ACPI: Reserving SSDT table memory at [mem 0x6ff60000-0x6ff6a4f9]
<6>[    0.005446] ACPI: Reserving PHAT table memory at [mem 0x6ff5f000-0x6ff5f7bf]
<6>[    0.005446] ACPI: Reserving BGRT table memory at [mem 0x6ff5e000-0x6ff5e037]
<6>[    0.005516] APIC: Switched APIC routing to: cluster x2apic
<6>[    0.005725] No NUMA configuration found
<6>[    0.005725] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[    0.005731] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[    0.005843] Zone ranges:
<6>[    0.005844]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
<6>[    0.005845]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
<6>[    0.005845]   Normal   [mem 0x0000000100000000-0x000000087f7fffff]
<6>[    0.005846]   Device   empty
<6>[    0.005846] Movable zone start for each node
<6>[    0.005847] Early memory node ranges
<6>[    0.005847]   node   0: [mem 0x0000000000001000-0x000000000009efff]
<6>[    0.005848]   node   0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[    0.005849]   node   0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[    0.005849]   node   0: [mem 0x0000000104500000-0x000000087f7fffff]
<6>[    0.005850] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[    0.005855] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[    0.005873] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[    0.007900] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[    0.036398] On node 0, zone Normal: 17664 pages in unavailable ranges
<6>[    0.036468] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[    0.036924] ACPI: PM-Timer IO Port: 0x1808
<6>[    0.036930] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[    0.036980] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[    0.036982] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[    0.036983] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[    0.036985] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[    0.036986] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[    0.036997] e820: update [mem 0x68f52000-0x68f6cfff] usable ==> reserved
<6>[    0.037004] TSC deadline timer available
<6>[    0.037005] CPU topo: Max. logical packages:   1
<6>[    0.037006] CPU topo: Max. logical dies:       1
<6>[    0.037006] CPU topo: Max. dies per package:   1
<6>[    0.037007] CPU topo: Max. threads per core:   1
<6>[    0.037008] CPU topo: Num. cores per package:     8
<6>[    0.037008] CPU topo: Num. threads per package:   8
<6>[    0.037008] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[    0.037021] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[    0.037022] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[    0.037023] PM: hibernation: Registered nosave memory: [mem 0x68f52000-0x68f6cfff]
<6>[    0.037024] PM: hibernation: Registered nosave memory: [mem 0x68f71000-0x68f71fff]
<6>[    0.037024] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[    0.037025] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[    0.037025] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[    0.037026] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[    0.037026] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[    0.037026] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[    0.037027] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[    0.037027] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1044fffff]
<6>[    0.037028] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[    0.037029] Booting paravirtualized kernel on bare hardware
<6>[    0.037031] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[    0.037039] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[    0.037381] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[    0.037386] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[    0.037388] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7 
<5>[    0.037401] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[    0.037484] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[    0.037497] random: crng init done
<6>[    0.039334] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[    0.040251] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[    0.040305] Fallback order for Node 0: 0 
<6>[    0.040308] Built 1 zonelists, mobility grouping on.  Total pages: 8289632
<6>[    0.040309] Policy zone: Normal
<6>[    0.040320] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[    0.040321] stackdepot: allocating hash table via alloc_large_system_hash
<6>[    0.040322] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[    0.041268] software IO TLB: area num 8.
<4>[    0.087060] **********************************************************
<4>[    0.087062] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.087062] **                                                      **
<4>[    0.087062] ** This system shows unhashed kernel memory addresses   **
<4>[    0.087062] ** via the console, logs, and other interfaces. This    **
<4>[    0.087063] ** might reduce the security of your system.            **
<4>[    0.087063] **                                                      **
<4>[    0.087063] ** If you see this message and you are not debugging    **
<4>[    0.087063] ** the kernel, report this immediately to your system   **
<4>[    0.087063] ** administrator!                                       **
<4>[    0.087063] **                                                      **
<4>[    0.087064] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
<4>[    0.087064] **********************************************************
<6>[    0.088130] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[    0.088457] ftrace: allocating 59560 entries in 233 pages
<6>[    0.113697] ftrace: allocated 233 pages with 5 groups
<6>[    0.114899] Dynamic Preempt: voluntary
<6>[    0.115342] Running RCU self tests
<6>[    0.115342] Running RCU synchronous self tests
<6>[    0.115343] rcu: Preemptible hierarchical RCU implementation.
<6>[    0.115343] rcu: 	RCU lockdep checking is enabled.
<6>[    0.115343] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[    0.115344] 	Trampoline variant of Tasks RCU enabled.
<6>[    0.115344] 	Rude variant of Tasks RCU enabled.
<6>[    0.115345] 	Tracing variant of Tasks RCU enabled.
<6>[    0.115345] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[    0.115345] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[    0.115383] Running RCU synchronous self tests
<6>[    0.115388] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115392] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.115394] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[    0.125397] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[    0.125845] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[    0.126157] Console: colour dummy device 80x25
<6>[    0.126166] printk: legacy console [tty0] enabled
<6>[    0.127416] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[    0.127423] ... MAX_LOCKDEP_SUBCLASSES:  8
<6>[    0.127427] ... MAX_LOCK_DEPTH:          48
<6>[    0.127431] ... MAX_LOCKDEP_KEYS:        8192
<6>[    0.127434] ... CLASSHASH_SIZE:          4096
<6>[    0.127438] ... MAX_LOCKDEP_ENTRIES:     524288
<6>[    0.127441] ... MAX_LOCKDEP_CHAINS:      524288
<6>[    0.127445] ... CHAINHASH_SIZE:          262144
<6>[    0.127449]  memory used by lock dependency info: 54145 kB
<6>[    0.127453]  memory used for stack traces: 4224 kB
<6>[    0.127457]  per task-struct memory footprint: 1920 bytes
<6>[    0.127511] ACPI: Core revision 20240827
<6>[    0.128387] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[    0.128450] APIC: Switch to symmetric I/O mode setup
<6>[    0.128456] DMAR: Host address width 38
<6>[    0.128460] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[    0.128495] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128527] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[    0.128550] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[    0.128575] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[    0.128599] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[    0.128635] DMAR: SATC flags: 0x1
<6>[    0.128644] DMAR-IR: IOAPIC id 2 under DRHD base  0xfc820000 IOMMU 2
<6>[    0.128650] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[    0.128655] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[    0.130718] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[    0.135804] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[    0.135823] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[    0.135895] CPU0: Thermal monitoring enabled (TM1)
<6>[    0.135901] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[    0.136074] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[    0.136079] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[    0.136089] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[    0.136096] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[    0.136101] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[    0.136108] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[    0.136115] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[    0.136131] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[    0.136138] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[    0.136144] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[    0.136149] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[    0.136156] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[    0.136162] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
<6>[    0.136168] x86/fpu: xstate_offset[9]:  832, xstate_sizes[9]:    8
<6>[    0.136174] x86/fpu: xstate_offset[11]:  840, xstate_sizes[11]:   16
<6>[    0.136180] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[    0.136817] Freeing SMP alternatives memory: 48K
<6>[    0.136817] pid_max: default: 32768 minimum: 301
<6>[    0.136817] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[    0.136817] landlock: Up and running.
<6>[    0.136817] Yama: becoming mindful.
<6>[    0.136817] AppArmor: AppArmor initialized
<6>[    0.136817] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136817] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[    0.136817] Running RCU synchronous self tests
<6>[    0.136817] Running RCU synchronous self tests
<6>[    0.136817] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[    0.136817] Running RCU Tasks wait API self tests
<6>[    0.136817] Running RCU Tasks Rude wait API self tests
<6>[    0.136817] Running RCU Tasks Trace wait API self tests
<6>[    0.136817] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline,  AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[    0.136822] core: cpu_core PMU driver: 
<6>[    0.136830] ... version:                6
<6>[    0.136833] ... bit width:              48
<6>[    0.136837] ... generic registers:      10
<6>[    0.136841] ... value mask:             0000ffffffffffff
<6>[    0.136845] ... max period:             00007fffffffffff
<6>[    0.136849] ... fixed-purpose events:   4
<6>[    0.136853] ... event mask:             0001000f000003ff
<6>[    0.136883] signal: max sigframe size: 3632
<6>[    0.136904] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[    0.136992] rcu: Hierarchical SRCU implementation.
<6>[    0.136997] rcu: 	Max phase no-delay instances is 400.
<6>[    0.137136] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[    0.138959] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[    0.139220] smp: Bringing up secondary CPUs ...
<6>[    0.139569] smpboot: x86: Booting SMP configuration:
<6>[    0.139576] .... node  #0, CPUs:      #1 #2 #3 #4 #5
<6>[    0.142959] Callback from call_rcu_tasks_trace() invoked.
<4>[    0.145902]  #6 #7
<6>[    0.010814] core: cpu_atom PMU driver: 
<6>[    0.010814] ... version:                6
<6>[    0.010814] ... bit width:              48
<6>[    0.010814] ... generic registers:      8
<6>[    0.010814] ... value mask:             0000ffffffffffff
<6>[    0.010814] ... max period:             00007fffffffffff
<6>[    0.010814] ... fixed-purpose events:   6
<6>[    0.010814] ... event mask:             00000077000000ff
<6>[    0.149978] smp: Brought up 1 node, 8 CPUs
<6>[    0.151100] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[    0.152950] Memory: 32360116K/33158528K available (24294K kernel code, 5580K rwdata, 9276K rodata, 5624K init, 68408K bss, 775236K reserved, 0K cma-reserved)
<6>[    0.153994] devtmpfs: initialized
<6>[    0.154077] x86/mm: Memory block size: 128MB
<6>[    0.169896] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[    0.170344] Running RCU synchronous self tests
<6>[    0.170357] Running RCU synchronous self tests
<6>[    0.170378] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.170378] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[    0.170826] pinctrl core: initialized pinctrl subsystem
<6>[    0.171318] PM: RTC time: 07:34:09, date: 2025-03-15
<6>[    0.172170] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[    0.173095] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[    0.173396] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[    0.173678] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[    0.173735] audit: initializing netlink subsys (disabled)
<5>[    0.173889] audit: type=2000 audit(1742024049.038:1): state=initialized audit_enabled=0 res=1
<6>[    0.174498] thermal_sys: Registered thermal governor 'fair_share'
<6>[    0.174500] thermal_sys: Registered thermal governor 'bang_bang'
<6>[    0.174506] thermal_sys: Registered thermal governor 'step_wise'
<6>[    0.174511] thermal_sys: Registered thermal governor 'user_space'
<6>[    0.174515] thermal_sys: Registered thermal governor 'power_allocator'
<6>[    0.174851] EISA bus registered
<6>[    0.174878] cpuidle: using governor ladder
<6>[    0.174878] cpuidle: using governor menu
<6>[    0.174919] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[    0.175281] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[    0.175307] PCI: Using configuration type 1 for base access
<6>[    0.175857] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[    0.177079] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[    0.177079] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[    0.177079] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[    0.177079] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[    0.197819] raid6: avx2x4   gen() 77868 MB/s
<6>[    0.214818] raid6: avx2x2   gen() 83018 MB/s
<6>[    0.231819] raid6: avx2x1   gen() 71241 MB/s
<6>[    0.231823] raid6: using algorithm avx2x2 gen() 83018 MB/s
<6>[    0.248819] raid6: .... xor() 57548 MB/s, rmw enabled
<6>[    0.248824] raid6: using avx2x2 recovery algorithm
<6>[    0.252072] fbcon: Taking over console
<6>[    0.253327] ACPI: Added _OSI(Module Device)
<6>[    0.253379] ACPI: Added _OSI(Processor Device)
<6>[    0.253424] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[    0.253468] ACPI: Added _OSI(Processor Aggregator Device)
<6>[    0.758216] ACPI: 32 ACPI AML tables successfully acquired and loaded
<6>[    0.771817] ACPI: EC: EC started
<6>[    0.771818] ACPI: EC: interrupt blocked
<6>[    0.774538] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[    0.774543] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[    0.775905] Callback from call_rcu_tasks() invoked.
<6>[    1.102678] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.102686] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[    1.131651] ACPI: Interpreter enabled
<6>[    1.131745] ACPI: PM: (supports S0 S4 S5)
<6>[    1.131750] ACPI: Using IOAPIC for interrupt routing
<6>[    1.145014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[    1.145039] PCI: Ignoring E820 reservations for host bridge windows
<6>[    1.191004] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[    1.191054] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[    1.246579] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[    1.247432] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[    1.255456] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[    1.637278] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[    1.656618] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[    1.816613] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[    1.818160] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[    1.826590] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[    1.836046] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[    1.836289] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[    1.836523] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[    1.961614] ACPI: \: Can't tag data node
<3>[    1.964548] ACPI: \: Can't tag data node
<3>[    1.967481] ACPI: \: Can't tag data node
<3>[    1.969869] ACPI: \: Can't tag data node
<3>[    1.972440] ACPI: \: Can't tag data node
<6>[    2.225237] ACPI: \_TZ_.FN00: New power resource
<6>[    2.225731] ACPI: \_TZ_.FN01: New power resource
<6>[    2.226212] ACPI: \_TZ_.FN02: New power resource
<6>[    2.226688] ACPI: \_TZ_.FN03: New power resource
<6>[    2.227166] ACPI: \_TZ_.FN04: New power resource
<6>[    2.228476] ACPI: \PIN_: New power resource
<6>[    2.231838] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[    2.231853] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[    2.235354] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[    2.244596] PCI host bridge to bus 0000:00
<6>[    2.244627] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
<6>[    2.244634] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
<6>[    2.244642] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[    2.244649] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[    2.244656] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[    2.244664] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[    2.247823] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[    2.248396] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[    2.248488] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[    2.248496] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[    2.248505] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[    2.248549] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[    2.249739] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[    2.249768] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[    2.252847] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[    2.252931] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[    2.252954] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[    2.255503] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[    2.255598] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.255628] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[    2.255674] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[    2.255897] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[    2.255979] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[    2.267478] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[    2.267563] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.267587] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[    2.267622] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[    2.267833] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[    2.267910] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[    2.279547] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[    2.279634] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.279658] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[    2.279695] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[    2.279911] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[    2.279987] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[    2.290483] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[    2.290549] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[    2.290577] pci 0000:00:0a.0: enabling Extended Tags
<6>[    2.290975] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[    2.291032] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[    2.291049] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[    2.291883] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.291973] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[    2.292096] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[    2.298763] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.299062] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[    2.299135] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[    2.299525] pci 0000:00:0d.2: supports D1 D2
<6>[    2.299570] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.302415] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[    2.302473] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[    2.302483] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[    2.302550] pci 0000:00:0d.3: supports D1 D2
<6>[    2.302555] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.304365] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[    2.304441] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[    2.304531] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[    2.308581] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.308697] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[    2.308867] pci 0000:00:13.0: PME# supported from D3hot
<6>[    2.309419] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[    2.309480] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[    2.309558] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[    2.311630] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[    2.311694] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[    2.311703] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[    2.312001] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.312109] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.313857] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.313957] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.315289] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.315401] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.316723] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.316882] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[    2.318150] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[    2.318241] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[    2.318342] pci 0000:00:16.0: PME# supported from D3hot
<6>[    2.320696] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[    2.320730] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.320738] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[    2.320745] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[    2.321065] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[    2.321123] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[    2.325667] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[    2.325772] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.325804] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[    2.326127] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[    2.326288] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[    2.333617] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[    2.336417] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[    2.336649] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[    2.336683] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[    2.336904] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[    2.337729] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[    2.337907] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[    2.337931] pci 0000:00:1f.4: BAR 4 [io  0xefa0-0xefbf]
<6>[    2.338817] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[    2.338817] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[    2.340162] pci 0000:00:1f.6: [8086:550f] type 00 class 0x020000 conventional PCI endpoint
<6>[    2.340334] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[    2.340521] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[    2.345515] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[    2.345861] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[    2.346213] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[    2.346610] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[    2.346726] pci 0000:7f:00.0: BAR 0 [io  0x3000-0x30ff]
<6>[    2.346747] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[    2.346767] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[    2.347034] pci 0000:7f:00.0: supports D1 D2
<6>[    2.347044] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[    2.348266] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.350236] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[    2.352482] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[    2.352767] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[    2.356433] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[    2.356551] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[    2.765947] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[   12.216333] Low-power S0 idle used by default for system suspend
<6>[   12.267542] ACPI: EC: interrupt unblocked
<6>[   12.267552] ACPI: EC: event unblocked
<6>[   12.267587] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[   12.267594] ACPI: EC: GPE=0x6e
<6>[   12.267599] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[   12.267607] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[   12.268109] iommu: Default domain type: Translated
<6>[   12.268109] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[   12.270151] SCSI subsystem initialized
<7>[   12.270186] libata version 3.00 loaded.
<6>[   12.270186] ACPI: bus type USB registered
<6>[   12.270221] usbcore: registered new interface driver usbfs
<6>[   12.270307] usbcore: registered new interface driver hub
<6>[   12.270417] usbcore: registered new device driver usb
<6>[   12.270728] pps_core: LinuxPPS API ver. 1 registered
<6>[   12.270739] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[   12.270789] PTP clock support registered
<6>[   12.272817] EDAC MC: Ver: 3.0.0
<6>[   12.274872] efivars: Registered efivars operations
<6>[   12.282525] NetLabel: Initializing
<6>[   12.282531] NetLabel:  domain hash size = 128
<6>[   12.282535] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
<6>[   12.282601] NetLabel:  unlabeled traffic allowed by default
<6>[   12.282615] mctp: management component transport protocol core
<6>[   12.282620] NET: Registered PF_MCTP protocol family
<6>[   12.282655] PCI: Using ACPI for IRQ routing
<7>[   12.301526] PCI: pci_cache_line_size set to 64 bytes
<6>[   12.301805] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[   12.301936] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[   12.301946] e820: reserve RAM buffer [mem 0x68f52000-0x6bffffff]
<7>[   12.301949] e820: reserve RAM buffer [mem 0x68f71000-0x6bffffff]
<7>[   12.301952] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[   12.301954] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[   12.302855] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[   12.302866] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[   12.302871] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[   12.302886] vgaarb: loaded
<6>[   12.304782] clocksource: Switched to clocksource tsc-early
<5>[   12.316706] VFS: Disk quotas dquot_6.6.0
<6>[   12.316760] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[   12.318846] AppArmor: AppArmor Filesystem Enabled
<6>[   12.319213] pnp: PnP ACPI init
<6>[   12.321129] system 00:00: [io  0x0680-0x069f] has been reserved
<6>[   12.321156] system 00:00: [io  0x164e-0x164f] has been reserved
<6>[   12.324350] system 00:02: [io  0x06a4] has been reserved
<6>[   12.324376] system 00:02: [io  0x06a0] has been reserved
<6>[   12.377548] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[   12.377574] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[   12.377603] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[   12.377626] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[   12.377655] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[   12.377680] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[   12.377705] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[   12.377726] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[   12.385676] system 00:04: [io  0x2000-0x20fe] has been reserved
<6>[   12.392762] system 00:06: [io  0x1854-0x1857] has been reserved
<6>[   12.393154] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[   12.405290] pnp: PnP ACPI: found 8 devices
<6>[   12.430673] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[   12.431273] NET: Registered PF_INET protocol family
<6>[   12.431601] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   12.438104] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[   12.438498] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[   12.438764] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[   12.440109] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[   12.443238] TCP: Hash tables configured (established 262144 bind 65536)
<6>[   12.443988] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   12.445592] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[   12.447287] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[   12.447417] pci 0000:00:07.0: bridge window [io  0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[   12.447445] pci 0000:00:07.1: bridge window [io  0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[   12.447466] pci 0000:00:07.2: bridge window [io  0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[   12.447554] pci 0000:00:07.0: bridge window [io  0x4000-0x4fff]: assigned
<6>[   12.447571] pci 0000:00:07.1: bridge window [io  0x5000-0x5fff]: assigned
<6>[   12.447586] pci 0000:00:07.2: bridge window [io  0x6000-0x6fff]: assigned
<6>[   12.447603] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[   12.447724] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[   12.447810] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[   12.447919] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[   12.448006] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[   12.448076] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[   12.448095] pci 0000:00:07.0:   bridge window [io  0x4000-0x4fff]
<6>[   12.448116] pci 0000:00:07.0:   bridge window [mem 0x8e000000-0x93ffffff]
<6>[   12.448141] pci 0000:00:07.0:   bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   12.448168] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[   12.448182] pci 0000:00:07.1:   bridge window [io  0x5000-0x5fff]
<6>[   12.448203] pci 0000:00:07.1:   bridge window [mem 0x88000000-0x8dffffff]
<6>[   12.448222] pci 0000:00:07.1:   bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   12.448256] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[   12.448271] pci 0000:00:07.2:   bridge window [io  0x6000-0x6fff]
<6>[   12.448291] pci 0000:00:07.2:   bridge window [mem 0x82000000-0x87ffffff]
<6>[   12.448310] pci 0000:00:07.2:   bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   12.448345] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[   12.448359] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
<6>[   12.448378] pci 0000:00:1c.0:   bridge window [mem 0x94300000-0x943fffff]
<6>[   12.448405] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[   12.448451] pci 0000:00:1c.4:   bridge window [mem 0x94200000-0x942fffff]
<6>[   12.448512] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
<6>[   12.448527] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
<6>[   12.448541] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[   12.448556] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[   12.448570] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[   12.448587] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
<6>[   12.448600] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[   12.448614] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[   12.448631] pci_bus 0000:2b: resource 0 [io  0x5000-0x5fff]
<6>[   12.448644] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[   12.448658] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[   12.448673] pci_bus 0000:55: resource 0 [io  0x6000-0x6fff]
<6>[   12.448687] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[   12.448700] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[   12.448716] pci_bus 0000:7f: resource 0 [io  0x3000-0x3fff]
<6>[   12.448729] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[   12.448744] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[   12.451035] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[   12.454352] PCI: CLS 0 bytes, default 64
<6>[   12.454545] DMAR: No RMRR found
<6>[   12.454611] DMAR: No ATSR found
<6>[   12.454620] DMAR: dmar1: Using Queued invalidation
<6>[   12.454676] DMAR: dmar0: Using Queued invalidation
<6>[   12.454694] DMAR: dmar2: Using Queued invalidation
<6>[   12.456571] pci 0000:00:04.0: Adding to iommu group 0
<6>[   12.456740] pci 0000:00:05.0: Adding to iommu group 1
<6>[   12.456900] pci 0000:00:0a.0: Adding to iommu group 2
<6>[   12.457024] pci 0000:00:0b.0: Adding to iommu group 3
<6>[   12.465810] pci 0000:00:02.0: Adding to iommu group 4
<6>[   12.468478] pci 0000:00:00.0: Adding to iommu group 5
<6>[   12.468615] pci 0000:00:07.0: Adding to iommu group 6
<6>[   12.468761] pci 0000:00:07.1: Adding to iommu group 7
<6>[   12.469388] pci 0000:00:07.2: Adding to iommu group 8
<6>[   12.469573] pci 0000:00:0d.0: Adding to iommu group 9
<6>[   12.469660] pci 0000:00:0d.2: Adding to iommu group 9
<6>[   12.469748] pci 0000:00:0d.3: Adding to iommu group 9
<6>[   12.469891] pci 0000:00:12.0: Adding to iommu group 10
<6>[   12.470027] pci 0000:00:13.0: Adding to iommu group 11
<6>[   12.470188] pci 0000:00:14.0: Adding to iommu group 12
<6>[   12.470282] pci 0000:00:14.2: Adding to iommu group 12
<6>[   12.470482] pci 0000:00:15.0: Adding to iommu group 13
<6>[   12.470577] pci 0000:00:15.1: Adding to iommu group 13
<6>[   12.470672] pci 0000:00:15.2: Adding to iommu group 13
<6>[   12.470765] pci 0000:00:15.3: Adding to iommu group 13
<6>[   12.470913] pci 0000:00:16.0: Adding to iommu group 14
<6>[   12.471034] pci 0000:00:1c.0: Adding to iommu group 15
<6>[   12.471183] pci 0000:00:1c.4: Adding to iommu group 16
<6>[   12.471406] pci 0000:00:1f.0: Adding to iommu group 17
<6>[   12.471505] pci 0000:00:1f.3: Adding to iommu group 17
<6>[   12.471602] pci 0000:00:1f.4: Adding to iommu group 17
<6>[   12.471702] pci 0000:00:1f.5: Adding to iommu group 17
<6>[   12.471804] pci 0000:00:1f.6: Adding to iommu group 17
<6>[   12.471945] pci 0000:7f:00.0: Adding to iommu group 18
<6>[   12.472101] pci 0000:80:00.0: Adding to iommu group 19
<6>[   12.493032] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[   12.493092] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[   12.493143] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[   12.497684] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[   12.497969] clocksource: Switched to clocksource tsc
<6>[   12.498067] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[   12.502573] Initialise system trusted keyrings
<5>[   12.502655] Key type blacklist registered
<6>[   12.503088] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[   12.517258] zbud: loaded
<6>[   12.519139] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[   12.519278] ntfs3: Enabled Linux POSIX ACLs support
<6>[   12.519286] ntfs3: Read-only LZX/Xpress compression included
<5>[   12.519767] integrity: Platform Keyring initialized
<5>[   12.519792] integrity: Machine keyring initialized
<6>[   12.528611] xor: automatically using best checksumming function   avx       
<5>[   12.528625] Key type asymmetric registered
<5>[   12.528641] Asymmetric key parser 'x509' registered
<6>[   12.528786] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[   12.529055] io scheduler mq-deadline registered
<6>[   12.529946] ledtrig-cpu: registered to indicate activity on CPUs
<6>[   12.530977] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[   12.531202] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[   12.533424] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[   12.534041] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[   12.534924] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[   12.535136] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[   12.536643] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[   12.537306] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[   12.539036] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[   12.539799] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[   12.540560] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[   12.544116] Monitor-Mwait will be used to enter C-1 state
<7>[   12.544242] Monitor-Mwait will be used to enter C-2 state
<7>[   12.544290] Monitor-Mwait will be used to enter C-3 state
<6>[   12.550734] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[   12.551017] ACPI: button: Lid Switch [LID0]
<6>[   12.551396] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[   12.551649] ACPI: button: Sleep Button [SLPB]
<6>[   12.551984] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[   12.552384] ACPI: button: Power Button [PWRB]
<6>[   12.701783] thermal LNXTHERM:00: registered as thermal_zone0
<6>[   12.701805] ACPI: thermal: Thermal Zone [TZ00] (57 C)
<6>[   12.704308] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[   12.707132] ACPI: battery: Slot [BAT1] (battery absent)
<6>[   12.709595] ACPI: battery: Slot [BAT0] (battery present)
<6>[   12.729899] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[   12.758863] serial 0000:00:12.0: enabling device (0000 -> 0002)
<4>[   12.772448] hpet_acpi_add: no address or irqs in _CRS
<6>[   12.772903] Linux agpgart interface v0.103
<6>[   12.810838] ACPI: bus type drm_connector registered
<6>[   12.839482] loop: module loaded
<6>[   12.917910] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[   13.113054] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[   13.253938] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[   13.361241] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[   13.478093] Key type psk registered
<6>[   13.483184] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[   13.484409] nvme nvme0: pci function 0000:80:00.0
<6>[   13.484510] tun: Universal TUN/TAP device driver, 1.6
<6>[   13.485733] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   13.485934] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[   13.488410] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   13.491258] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[   13.491300] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[   13.491330] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   13.492034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   13.492067] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.492083] usb usb1: Product: xHCI Host Controller
<6>[   13.492095] usb usb1: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   13.492108] usb usb1: SerialNumber: 0000:00:0d.0
<6>[   13.493944] hub 1-0:1.0: USB hub found
<6>[   13.494147] hub 1-0:1.0: 1 port detected
<6>[   13.500622] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   13.500646] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.500662] usb usb2: Product: xHCI Host Controller
<6>[   13.500674] usb usb2: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   13.500687] usb usb2: SerialNumber: 0000:00:0d.0
<6>[   13.502329] hub 2-0:1.0: USB hub found
<6>[   13.502408] hub 2-0:1.0: 3 ports detected
<6>[   13.523045] nvme nvme0: 8/0/0 default/read/poll queues
<6>[   13.536155]  nvme0n1: p1 p2
<6>[   13.575572] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   13.575623] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[   13.577786] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[   13.580837] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[   13.580873] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[   13.580906] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[   13.581252] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[   13.581274] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.581291] usb usb3: Product: xHCI Host Controller
<6>[   13.581303] usb usb3: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   13.581317] usb usb3: SerialNumber: 0000:00:14.0
<6>[   13.582923] hub 3-0:1.0: USB hub found
<6>[   13.583009] hub 3-0:1.0: 8 ports detected
<6>[   13.635154] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[   13.635164] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   13.635170] usb usb4: Product: xHCI Host Controller
<6>[   13.635175] usb usb4: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[   13.635180] usb usb4: SerialNumber: 0000:00:14.0
<6>[   13.636164] hub 4-0:1.0: USB hub found
<6>[   13.636199] hub 4-0:1.0: 2 ports detected
<6>[   13.640433] usbcore: registered new interface driver usb-storage
<6>[   13.640514] usbcore: registered new interface driver usbserial_generic
<6>[   13.640566] usbserial: USB Serial support registered for generic
<6>[   13.640600] usbcore: registered new interface driver ftdi_sio
<6>[   13.640621] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[   13.640653] usbcore: registered new interface driver pl2303
<6>[   13.640676] usbserial: USB Serial support registered for pl2303
<6>[   13.640749] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[   13.640755] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[   14.353016] i8042: Can't read CTR while initializing i8042
<3>[   14.353022] i8042 i8042: probe with driver i8042 failed with error -5
<6>[   14.355184] mousedev: PS/2 mouse device common for all mice
<6>[   14.356196] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[   14.358090] rtc_cmos rtc_cmos: registered as rtc0
<6>[   14.358312] rtc_cmos rtc_cmos: setting system clock to 2025-03-15T07:34:23 UTC (1742024063)
<6>[   14.358493] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[   14.358548] i2c_dev: i2c /dev entries driver
<6>[   14.363409] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[   14.363425] softdog:              soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[   14.363436] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[   14.363484] device-mapper: uevent: version 1.0.3
<6>[   14.363825] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[   14.363958] platform eisa.0: Probing EISA bus 0
<4>[   14.363973] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[   14.363988] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[   14.364000] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[   14.364011] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[   14.364023] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[   14.364034] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[   14.364046] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[   14.364057] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[   14.364069] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[   14.364078] platform eisa.0: EISA: Detected 0 cards
<6>[   14.364089] intel_pstate: Intel P-state driver initializing
<6>[   14.367522] Hybrid CPU capacity scaling enabled
<6>[   14.369134] intel_pstate: HWP enabled
<6>[   14.369142] sdhci: Secure Digital Host Controller Interface driver
<6>[   14.369150] sdhci: Copyright(c) Pierre Ossman
<6>[   14.369293] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[   14.371933] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[   14.372966] drop_monitor: Initializing network drop monitor service
<6>[   14.373262] NET: Registered PF_INET6 protocol family
<6>[   14.377163] Segment Routing with IPv6
<6>[   14.377220] In-situ OAM (IOAM) with IPv6
<6>[   14.377278] NET: Registered PF_PACKET protocol family
<5>[   14.377548] Key type dns_resolver registered
<4>[   14.381505] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[   14.382120] microcode: Current revision: 0x0000011c
<6>[   14.383065] IPI shorthand broadcast: enabled
<6>[   14.394347] sched_clock: Marking stable (14384001463, 9814147)->(14464787534, -70971924)
<6>[   14.395097] registered taskstats version 1
<5>[   14.396356] Loading compiled-in X.509 certificates
<6>[   14.424352] Demotion targets for Node 0: null
<6>[   14.424636] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[   14.424639] kmemleak: Automatic memory scanning thread started
<5>[   14.424875] Key type .fscrypt registered
<5>[   14.424881] Key type fscrypt-provisioning registered
<6>[   14.427648] Btrfs loaded, zoned=yes, fsverity=yes
<5>[   14.427772] Key type trusted registered
<5>[   14.429856] Key type encrypted registered
<6>[   14.429868] AppArmor: AppArmor sha256 policy hashing enabled
<5>[   14.430096] Loading compiled-in module X.509 certificates
<5>[   14.430974] Loaded X.509 cert 'Build time autogenerated kernel key: a5b089a75eb368add3b09e7758283129b5a35066'
<6>[   14.430995] ima: Allocated hash algorithm: sha256
<6>[   14.448942] ima: No architecture policies found
<6>[   14.449217] evm: Initialising EVM extended attributes:
<6>[   14.449229] evm: security.selinux
<6>[   14.449238] evm: security.SMACK64
<6>[   14.449246] evm: security.SMACK64EXEC
<6>[   14.449254] evm: security.SMACK64TRANSMUTE
<6>[   14.449264] evm: security.SMACK64MMAP
<6>[   14.449272] evm: security.apparmor
<6>[   14.449280] evm: security.ima
<6>[   14.449287] evm: security.capability
<6>[   14.449296] evm: HMAC attrs: 0x1
<6>[   14.454358] PM:   Magic number: 1:877:571
<6>[   14.454465] acpi INTC109D:00: hash matches
<6>[   14.454765] printk: legacy console [netcon0] enabled
<6>[   14.454782] netconsole: network logging started
<6>[   14.455976] RAS: Correctable Errors collector initialized.
<6>[   14.457080] clk: Disabling unused clocks
<6>[   14.457115] PM: genpd: Disabling unused power domains
<6>[   14.458225] md: Waiting for all devices to be available before autodetect
<6>[   14.458244] md: If you don't use raid, use raid=noautodetect
<6>[   14.458259] md: Autodetecting RAID arrays.
<6>[   14.458279] md: autorun ...
<6>[   14.458288] md: ... autorun DONE.
<6>[   14.512077] EXT4-fs (nvme0n1p2): mounted filesystem ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 ro with ordered data mode. Quota mode: none.
<6>[   14.512146] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[   14.513281] devtmpfs: mounted
<6>[   14.524829] Freeing unused decrypted memory: 2028K
<6>[   14.525754] Freeing unused kernel image (initmem) memory: 5624K
<6>[   14.525777] Write protecting the kernel read-only data: 34816k
<6>[   14.526163] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[   14.526424] Freeing unused kernel image (rodata/data gap) memory: 964K
<6>[   14.531233] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[   14.531260] Run /sbin/init as init process
<7>[   14.531264]   with arguments:
<7>[   14.531265]     /sbin/init
<7>[   14.531266]   with environment:
<7>[   14.531267]     HOME=/
<7>[   14.531267]     TERM=linux
<7>[   14.531268]     BOOT_IMAGE=/boot/drm_intel
<7>[   14.576692] systemd[1]: Inserted module 'autofs4'
<7>[   14.595867] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[   14.595961] systemd[1]: Detected architecture x86-64.
<7>[   14.597670] systemd[1]: Hostname set to <shard-lnl-1>.
<7>[   14.830649] systemd[1]: Queued start job for default target graphical.target.
<7>[   14.874655] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[   14.879324] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[   14.882148] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[   14.882559] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[   14.883543] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[   14.883710] systemd[1]: Expecting device dev-disk-by\x2duuid-47B0\x2dB6FF.device - /dev/disk/by-uuid/47B0-B6FF...
<7>[   14.883841] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[   14.883966] systemd[1]: Reached target slices.target - Slice Units.
<7>[   14.884073] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[   14.884169] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[   14.884269] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[   14.884610] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[   14.885387] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[   14.885770] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[   14.886206] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[   14.886486] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[   14.886697] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[   14.887099] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[   14.887403] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[   14.887663] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[   14.887845] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   14.888132] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[   14.888372] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[   14.910843] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[   14.916561] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[   14.920692] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[   14.923785] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[   14.928587] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[   14.931576] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[   14.934934] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[   14.939188] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[   14.943172] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[   14.946416] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[   14.949425] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[   14.954450] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[   14.956597] systemd-journald[214]: Collecting audit messages is disabled.
<7>[   14.959629] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[   14.962946] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[   14.970225] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[   14.970436] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[   14.973848] pstore: Using crash dump compression: deflate
<7>[   14.975012] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[   14.976737] pstore: Registered efi_pstore as persistent store backend
<7>[   14.980605] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[   14.980768] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   14.980947] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[   14.984254] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[   14.988182] fuse: init (API version 7.42)
<7>[   14.991236] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[   15.143688] EXT4-fs (nvme0n1p2): re-mounted ae92fef7-5a02-4ec6-9d86-98e4e30b66f8 r/w. Quota mode: none.
<6>[   15.184179] Adding 8388604k swap on /swap.img.  Priority:-2 extents:52 across:429129728k SS
<7>[   15.198489] systemd-journald[214]: Received client request to flush runtime journal.
<7>[   15.218164] systemd-journald[214]: /var/log/journal/834d840f209d4e2294628ae19454e8da/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[   15.218180] systemd-journald[214]: Rotating system journal.
<4>[   15.873134] nvme nvme0: using unchecked data buffer
<6>[   15.965655] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[   16.025074] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025101] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025125] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025150] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025174] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025199] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025224] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025248] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025273] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025297] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025322] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025347] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025371] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025396] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025421] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025445] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025470] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025506] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025530] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025555] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025579] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025604] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025629] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025653] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025678] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025707] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025727] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025770] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025790] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025821] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025840] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025864] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025899] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025923] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025947] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025972] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.025997] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.026021] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.062412] int3472-discrete INT3472:01: cannot find GPIO chip INTC105D:01, deferring
<4>[   16.071865] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.071890] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.071915] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.071939] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.071964] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.071989] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072025] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072049] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072149] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072188] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072212] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072243] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072310] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072334] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072359] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072387] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072412] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072432] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072456] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072481] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072506] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072530] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072555] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072579] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072604] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072629] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072653] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072678] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072703] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.072727] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[   16.077487] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[   16.079480] pci 0000:00:05.0: Setting to D3hot
<6>[   16.090226] intel-hid INTC107B:00: platform supports 5 button array
<6>[   16.091625] pci 0000:00:0b.0: Setting to D3hot
<4>[   16.100259] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100283] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100303] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100323] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100342] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100362] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100382] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100456] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100476] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100496] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100516] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100536] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100556] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100576] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100595] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100615] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100635] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100655] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100698] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100718] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100738] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100758] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.100805] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101091] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101112] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101158] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101178] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101198] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101218] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101250] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101270] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101290] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101310] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101330] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101349] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101369] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101389] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101409] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.101429] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.105266] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[   16.105650] intel_pmc_core INT33A1:00:  initialized
<6>[   16.122097] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[   16.146611] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.146635] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<5>[   16.197251] audit: type=1400 audit(1742024065.337:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=430 comm="apparmor_parser"
<5>[   16.197812] audit: type=1400 audit(1742024065.337:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=433 comm="apparmor_parser"
<5>[   16.198521] audit: type=1400 audit(1742024065.338:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=432 comm="apparmor_parser"
<3>[   16.199721] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<5>[   16.204973] audit: type=1400 audit(1742024065.345:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=434 comm="apparmor_parser"
<3>[   16.205692] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<5>[   16.209274] audit: type=1400 audit(1742024065.349:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=435 comm="apparmor_parser"
<5>[   16.210666] audit: type=1400 audit(1742024065.350:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=436 comm="apparmor_parser"
<4>[   16.211863] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.211895] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.211917] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.211934] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.211954] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.211974] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.211994] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212014] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212033] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212069] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212090] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212135] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212155] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212199] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[   16.212218] audit: type=1400 audit(1742024065.352:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=437 comm="apparmor_parser"
<4>[   16.212219] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212239] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212259] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212305] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212337] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212357] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212377] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212409] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212429] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212449] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212469] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212515] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212558] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212578] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212598] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212632] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212652] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212672] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212692] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212712] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212732] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212752] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212772] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212792] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212812] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212846] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212864] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212884] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212904] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212924] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[   16.212944] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[   16.214135] audit: type=1400 audit(1742024065.354:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=438 comm="apparmor_parser"
<5>[   16.217969] audit: type=1400 audit(1742024065.357:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=439 comm="apparmor_parser"
<5>[   16.218943] audit: type=1400 audit(1742024065.359:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=440 comm="apparmor_parser"
<6>[   16.593223] ACPI: bus type thunderbolt registered
<6>[   16.611710] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[   16.633258] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[   16.635155] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[   16.635161] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[   16.656080] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[   16.669455] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[   16.669623] e1000e: Intel(R) PRO/1000 Network Driver
<6>[   16.669628] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[   16.669726] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[   16.682890] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[   16.683535] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[   16.684299] intel_rapl_common: Found RAPL domain package
<6>[   16.684307] intel_rapl_common: Found RAPL domain dram
<6>[   16.694166] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[   16.702829] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[   16.730844] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[   16.758478] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[   16.879428] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[   16.879435] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[   16.879436] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[   16.879437] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[   16.879439] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[   16.879440] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[   16.881236] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 9c:a2:f4:61:fe:e9, XID 541, IRQ 176
<6>[   16.881242] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[   16.919812] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[   16.964156] cryptd: max_cpu_qlen set to 1000
<6>[   17.045017] AES CTR mode by8 optimization enabled
<4>[   17.074240] block nvme0n1: No UUID available providing old NGUID
<6>[   17.132765] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[   17.302099] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:30:89
<6>[   17.302105] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[   17.302265] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[   17.353294] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[   17.380071] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[   17.380080] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[   17.380083] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[   17.401245] evm: overlay not supported
<6>[   17.472474] intel_rapl_common: Found RAPL domain package
<6>[   17.472480] intel_rapl_common: Found RAPL domain core
<6>[   17.472482] intel_rapl_common: Found RAPL domain uncore
<6>[   17.472484] intel_rapl_common: Found RAPL domain dram
<6>[   17.472486] intel_rapl_common: Found RAPL domain psys
<6>[   17.721948] loop0: detected capacity change from 0 to 8
<4>[   17.766490] spi-nor spi0.0: supply vcc not found, using dummy regulator
<6>[   17.767228] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[   17.809172] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<5>[   17.882202] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[   17.882221] 0x000000000000-0x000002000000 : "BIOS"
<6>[   18.184529] Consider using thermal netlink events interface
<6>[   18.214979] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[   18.374094] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[   18.392202] hid: raw HID events driver (C) Jiri Kosina
<6>[   18.399531] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[   18.438100] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.440222] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.443204] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.444379] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.445993] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.447113] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.453026] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.457244] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.461186] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.463960] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on 
<6>[   18.467843] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   18.470724] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on 
<6>[   19.126515] typec port0: bound usb3-port1 (ops connector_ops)
<6>[   19.126540] typec port0: bound usb2-port1 (ops connector_ops)
<6>[   20.030730] typec port1: bound usb3-port2 (ops connector_ops)
<6>[   20.030754] typec port1: bound usb2-port2 (ops connector_ops)
<6>[   23.559728] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<4>[   28.790963] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<7>[   36.318538] systemd-journald[214]: /var/log/journal/834d840f209d4e2294628ae19454e8da/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[   74.837902] [IGT] xe_module_load: executing
<7>[   74.844608] [IGT] xe_module_load: starting subtest load
<5>[   75.038196] Setting dangerous option force_probe - tainting kernel
<6>[   75.041032] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[   75.042588] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[   75.042600] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE  64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[   75.042715] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[   75.042817] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[   75.047606] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[   75.051760] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[   75.051879] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[   75.051947] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[   75.052012] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   75.052074] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[   75.052136] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   75.052196] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   75.052264] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   75.052336] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   75.052410] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   75.052484] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   75.052557] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   75.052629] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   75.052703] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   75.052774] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   75.052877] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[   75.054037] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   75.054117] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   75.063337] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   75.064249] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   75.064322] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[   75.064408] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,000000ef
<7>[   75.064477] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,000000ef
<7>[   75.064544] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     000000ff
<7>[   75.064610] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   75.064678] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,000000ff
<6>[   75.065400] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[   75.069929] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[   75.070009] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   75.070060] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[   75.070110] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   75.070159] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[   75.070207] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   75.070254] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   75.070300] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   75.070380] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   75.070440] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   75.070501] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   75.070563] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   75.070624] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   75.070685] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[   75.072691] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[   75.075563] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1345
<6>[   75.076670] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[   75.076771] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[   75.076867] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[   75.078341] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   75.078522] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[   75.078607] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   75.098426] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   75.098763] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   75.098827] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[   75.098890] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[   75.098948] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute):  00000000,00000000,00000000
<7>[   75.099002] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS:     00000000
<7>[   75.099055] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type:             simd16
<7>[   75.099106] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask:        00000000,0000000f
<7>[   75.099542] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[   75.099701] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[   75.099830] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6feec018
<7>[   75.099950] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[   75.100035] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[   75.100111] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[   75.100186] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[   75.100261] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[   75.100358] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[   75.100460] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[   75.100593] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[   75.100713] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[   75.100819] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[   75.100921] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[   75.101016] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[   75.101106] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[   75.101194] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[   75.101287] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[   75.101380] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   75.101497] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   75.101606] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[   75.101709] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   75.101799] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   75.101880] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   75.101963] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[   75.102047] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   75.102130] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   75.102224] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   75.102319] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[   75.102420] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   75.102513] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   75.102602] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   75.102691] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[   75.102773] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   75.102846] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   75.102920] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   75.102991] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[   75.103063] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[   75.103136] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[   75.103208] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[   75.103286] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[   75.103768] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[   75.103864] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE      ", BDB version 260
<7>[   75.103950] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[   75.104041] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[   75.104133] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[   75.104225] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[   75.104308] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[   75.104385] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[   75.104477] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[   75.104578] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[   75.104672] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[   75.104764] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[   75.104843] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[   75.104917] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[   75.104991] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[   75.105059] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[   75.105128] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[   75.105198] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[   75.105271] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[   75.105350] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   75.105432] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   75.105533] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[   75.105621] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[   75.105704] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[   75.105780] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   75.105848] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   75.105911] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[   75.105975] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[   75.106072] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   75.106200] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[   75.106324] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   75.106484] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[   75.106672] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[   75.106810] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[   75.106905] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   75.107011] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[   75.107151] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[   75.107247] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[   75.107272] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[   75.107386] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[   75.107507] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[   75.107627] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[   75.108025] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[   75.108196] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[   75.108873] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[   75.108972] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[   75.109057] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[   75.109135] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[   75.109209] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[   75.109283] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[   75.109355] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[   75.109432] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[   75.111247] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[   75.111375] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x8f074 = 0x86fc0
<7>[   75.111494] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[   75.111612] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[   75.111725] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[   75.111821] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[   75.111915] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[   75.112000] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f074 = 0x97fc0
<7>[   75.112085] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   75.112169] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[   75.112254] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   75.112340] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[   75.112422] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   75.112529] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[   75.112629] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[   75.112719] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f474 = 0x9ffc0
<7>[   75.112802] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   75.112877] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[   75.112953] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   75.113034] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[   75.113122] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   75.113209] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[   75.113301] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[   75.113378] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[0]: 0x5f874 = 0x547c0
<7>[   75.113457] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[   75.113550] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[   75.113646] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[   75.113741] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[   75.113833] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[   75.113919] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]]  mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[   75.118368] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[   75.122073] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[   75.122231] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[   75.122357] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[   75.122570] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[   75.122768] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[   75.122970] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[   75.123091] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[   75.123208] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[   75.123327] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[   75.123451] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[   75.123591] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[   75.123699] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[   75.123802] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[   75.123904] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[   75.124026] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[   75.124259] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   75.124371] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   75.124486] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   75.124594] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   75.124701] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<6>[   75.124816] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[   75.124838] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   75.125002] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   75.126456] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   75.126637] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[   75.128615] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   75.129219] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID  HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[   75.130065] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[   75.131432] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[   75.131973] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[   75.134111] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   75.143457] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   75.143468] [drm] DisplayID checksum invalid, remainder is 248
<5>[   75.143470] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.143471] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   75.143474] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.143475] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   75.143480] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.143481] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   75.143483] [drm] DisplayID checksum invalid, remainder is 248
<5>[   75.143518] [drm] DisplayID checksum invalid, remainder is 248
<5>[   75.143519] [drm] DisplayID checksum invalid, remainder is 248
<5>[   75.143520] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.143536] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   75.144115] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[   75.144678] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[   75.144803] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[   75.144952] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[   75.145086] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[   75.145235] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[   75.145323] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[   75.145407] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[   75.145490] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[   75.145590] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[   75.145729] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[   75.145952] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[   75.146122] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   75.146247] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[   75.146589] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[   75.146737] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   75.146872] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[   75.147071] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[   75.147185] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[   75.147294] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[   75.147726] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[   75.147877] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[   75.147994] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[   75.148078] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[   75.148162] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[   75.148245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[   75.148325] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[   75.148408] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[   75.148489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[   75.148583] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[   75.148683] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[   75.148781] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[   75.148873] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[   75.148949] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[   75.149022] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[   75.149094] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[   75.149165] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[   75.149236] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[   75.149306] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[   75.149376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[   75.149446] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[   75.150213] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[   75.150318] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[   75.150400] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[   75.150479] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[   75.150561] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[   75.150651] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[   75.150741] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[   75.150833] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[   75.150913] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[   75.150981] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[   75.151048] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[   75.151114] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[   75.151183] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[   75.151255] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[   75.151321] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[   75.151386] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[   75.151454] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[   75.151555] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[   75.151650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[   75.151742] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[   75.151832] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[   75.152008] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[   75.152085] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[   75.152155] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[   75.152224] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[   75.152286] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[   75.152348] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[   75.152411] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[   75.152472] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[   75.152532] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[   75.152614] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[   75.152702] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[   75.152788] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[   75.152869] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[   75.152938] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[   75.153001] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[   75.153064] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[   75.153126] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[   75.153186] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[   75.153394] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[   75.153468] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   75.153541] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[   75.153636] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1
<7>[   75.153755] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7>[   75.153870] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7>[   75.153992] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[   75.154079] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[   75.154249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[   75.154334] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   75.154416] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[   75.154496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   75.154581] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   75.154684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   75.154785] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   75.154880] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[   75.154956] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   75.155031] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   75.155104] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   75.155178] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[   75.155251] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   75.155323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[   75.155396] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   75.155468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[   75.155540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[   75.155637] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   75.155736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   75.155835] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   75.155924] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   75.156001] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   75.156073] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   75.156143] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   75.156213] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   75.156282] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   75.156350] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   75.156418] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   75.156484] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[   75.156550] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[   75.156643] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   75.156728] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   75.156814] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.156899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.156970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.157039] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   75.157109] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   75.157179] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.157247] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.157314] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.157379] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   75.157443] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[   75.157509] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[   75.157809] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[   75.157926] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[   75.205882] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[   75.269975] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[   75.404247] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[   75.404252] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[   75.404253] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[   75.404524] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[   75.404643] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   75.404745] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   75.404826] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   75.404928] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[   75.405019] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[   75.405111] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[   75.405174] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[   75.405237] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[   75.405297] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[   75.406892] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[   75.406962] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[   75.407035] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[   75.407108] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[   75.407174] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[   75.407240] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[   75.407304] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[   75.407383] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[   75.407461] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[   75.407534] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[   75.407609] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[   75.407682] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[   75.407752] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[   75.407816] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[   75.407874] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[   75.407934] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[   75.407994] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[   75.408053] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[   75.408111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[   75.408167] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[   75.408224] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[   75.408279] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[   75.408340] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[   75.408396] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[   75.408457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[   75.408516] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[   75.408586] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[   75.408656] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[   75.408728] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[   75.408794] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[   75.408853] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[   75.408912] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[   75.408974] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[   75.409036] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[   75.409098] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[   75.409158] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[   75.409220] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[   75.409281] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[   75.409721] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[   75.409791] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[   75.409861] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[   75.410124] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[   75.410176] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[   75.410226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[   75.410647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[   75.410715] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[   75.410782] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[   75.410844] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[   75.410903] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[   75.410956] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[   75.411522] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[   75.411614] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[   75.411685] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[   75.411750] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[   75.411810] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[   75.411869] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[   75.411925] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[   75.411978] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[   75.412028] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[   75.412078] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[   75.412126] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[   75.412174] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[   75.412222] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[   75.412268] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[   75.412358] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[   75.412582] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[   75.415915] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[   75.453531] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[   75.454322] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[   75.454400] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[   75.463572] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[   75.463939] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[   75.465084] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[   75.465172] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[   75.465251] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[   75.465321] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[   75.465389] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[   75.465456] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[   75.465546] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[   75.465619] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[   75.465693] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7>[   75.469418] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[   75.469526] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7>[   75.469618] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[   75.472872] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[   75.476903] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[   75.476906] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[   75.476907] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[   75.476908] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[   75.476909] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[   75.476910] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[   75.476911] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[   75.476911] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[   75.476912] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[   75.476913] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[   75.476949] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[   75.477089] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[   75.477224] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[   75.478197] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[   75.478285] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[   75.478364] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[   75.478440] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[   75.478514] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[   75.478612] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[   75.478704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[   75.478796] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[   75.478881] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[   75.478960] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[   75.479031] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[   75.479100] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[   75.479167] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[   75.479233] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[   75.479299] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[   75.479366] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[   75.479432] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[   75.479495] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[   75.479576] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[   75.479657] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[   75.479733] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[   75.479810] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[   75.479884] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[   75.479946] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[   75.480002] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[   75.480057] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[   75.480113] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[   75.480166] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[   75.480219] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[   75.480284] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[   75.480998] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[   75.481095] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[   75.481521] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[   75.481636] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[   75.482313] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[   75.482395] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[   75.482462] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[   75.482527] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[   75.482613] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[   75.482693] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[   75.482767] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[   75.482838] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[   75.482909] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[   75.482969] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[   75.483021] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[   75.483073] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[   75.483123] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[   75.483171] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[   75.483242] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[   75.483332] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[   75.506656] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[   75.507638] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[   75.508056] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[   75.527714] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[   75.528060] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[   75.528911] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   75.531057] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   75.533234] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[   75.575859] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[   75.577200] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[   75.577294] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[   75.577411] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb (   0 -    0) -> (4054 - 4096), size    0 ->   42
<7>[   75.577495] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   75.577591] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   75.577692] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   75.577792] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   75.577921] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   75.578813] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[   75.578970] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[   75.579083] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[   75.588491] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[   75.595619] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[   75.598690] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[   75.599300] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[   75.601119] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[   75.601242] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[   75.602051] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[   75.603276] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[   75.603367] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[   75.604185] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[   75.605152] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[   75.605240] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[   75.605916] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[   75.606853] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[   75.606926] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[   75.606961] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[   75.630545] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
<6>[   75.634818] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[   75.638676] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[   75.638836] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[   75.641682] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[   75.641795] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[   75.641900] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[   75.642001] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[   75.642207] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   75.642371] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   75.642521] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   75.642648] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   75.642790] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   75.642909] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   75.643025] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   75.643165] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   75.643281] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[   75.643341] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[   75.643391] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[   75.644058] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   75.644516] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   75.644535] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   75.645447] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   75.645946] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   75.646075] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   75.646194] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   75.646404] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   75.646409] [drm] DisplayID checksum invalid, remainder is 248
<5>[   75.646410] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.646412] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   75.646414] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.646415] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   75.646419] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.646421] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   75.646423] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.646448] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   75.646559] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   75.647226] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   75.647349] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   75.648359] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[   75.648591] [drm] DisplayID checksum invalid, remainder is 248
<5>[   75.648594] [drm] DisplayID checksum invalid, remainder is 248
<5>[   75.648595] [drm] DisplayID checksum invalid, remainder is 248
<7>[   75.648626] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   75.648638] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   75.648649] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   75.648658] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   75.648817] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   75.648827] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   75.648835] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   75.648958] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   75.648965] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   75.648972] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   75.649096] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   75.649105] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   75.649108] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   75.649110] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   75.649112] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   75.649188] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   75.649214] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[   75.649216] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[   75.649233] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   75.649348] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[   75.649368] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<6>[   75.649389] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[   75.650053] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[   75.651370] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[   75.654775] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01
<7>[   75.655375] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL
<7>[   75.655382] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled
<7>[   75.657515] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01d97000
<6>[   75.658783] fbcon: xedrmfb (fb0) is primary device
<7>[   75.660321] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[   75.660478] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[   75.660607] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[   75.660740] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[   75.660865] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[   75.660988] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[   75.661119] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[   75.661237] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[   75.661354] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes, 
<7>[   75.661473] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[   75.661590] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[   75.661704] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   75.661817] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   75.661929] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[   75.662040] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   75.662160] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   75.662271] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   75.662380] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[   75.662490] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[   75.662605] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no, 
<7>[   75.662716] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[   75.662824] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[   75.662928] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[   75.663032] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[   75.663144] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[   75.663245] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[   75.663344] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[   75.663445] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[   75.663544] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[   75.663656] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[   75.663765] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[   75.663928] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb (   0 -    0) -> (   0 - 4054), size    0 -> 4054
<7>[   75.664051] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[   75.664173] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]   lines    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    1,  12,  12,  12,  11,  12,   0,   0,   0,   3,    0
<7>[   75.664278] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A]  blocks    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   24, 289, 289, 289, 265, 289,   0,   0,  38,  73,   87
<7>[   75.664379] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->   28, 319, 319, 319, 293, 319,   0,   0,  39,  82,   88
<7>[   75.664479] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   75.664574] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.664668] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.664760] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.664851] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   75.664937] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665009] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665081] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665178] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   75.665262] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665346] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665427] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665496] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   75.665563] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665630] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665701] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665776] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   level  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm ->  wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[   75.665849] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]   lines    1,   1,   1,   1,   1,   1,   0,   0,   1,   1,    1 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665922] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A]  blocks    7,   7,   7,   7,   7,   7,   0,   0,   7,   7,    7 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.665992] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0 ->    0,   0,   0,   0,   0,   0,   0,   0,   0,   0,    0
<7>[   75.666068] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[   75.666195] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[   75.666310] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[   75.666421] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   75.666532] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[   75.666642] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[   75.666780] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[   75.666947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[   75.667075] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[   75.667199] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[   75.667307] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[   75.667415] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[   75.667521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[   75.667625] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[   75.667729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[   75.667832] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[   75.667927] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[   75.668025] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[   75.668130] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[   75.668229] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[   75.668327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[   75.668425] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[   75.668521] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     pixelformat: RGB
<7>[   75.668617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     colorimetry: sRGB
<7>[   75.668713] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     bpc: 0
<7>[   75.668792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     dynamic range: VESA range
<7>[   75.668869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]]     content type: Not defined
<7>[   75.668945] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[   75.669026] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[   75.669126] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[   75.669221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7>[   75.669313] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   75.669404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   75.669493] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   75.669582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[   75.669670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[   75.669757] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[   75.669836] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[   75.669907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[   75.669978] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[   75.670048] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[   75.670125] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[   75.670210] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[   75.670295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[   75.670385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   75.670477] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.670566] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.670654] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.670739] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[   75.670826] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[   75.670909] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.670995] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.671080] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[   75.671177] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[   75.671261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[   75.671345] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[   75.671427] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] 	src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[   75.671507] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[   75.671585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[   75.671662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[   75.671744] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[   75.671830] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[   75.672525] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]] 
<6>[   75.678697] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[   75.678943] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[   75.689864] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   75.690021] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   75.690129] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   75.690228] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[   75.690312] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   75.690390] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   75.690465] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   75.690538] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[   75.690609] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   75.690679] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   75.690748] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   75.690816] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[   75.690885] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   75.690954] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   75.691023] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   75.691092] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[   75.691162] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   75.691238] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   75.691314] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   75.691387] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[   75.691458] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   75.691528] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   75.691596] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   75.691663] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[   75.691730] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   75.691797] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   75.691864] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   75.691931] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[   75.691998] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   75.692065] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   75.692134] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   75.692206] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[   75.692274] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   75.692342] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   75.692410] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[   75.692477] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[   75.697279] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[   75.698143] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[   75.699167] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[   75.699853] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[   75.701597] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[   75.880893] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[   75.881192] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[   75.892397] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[   75.892567] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[   75.892573] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   75.892698] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000003 PP_CONTROL: 0x00000060
<7>[   75.892699] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   75.945290] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[   75.945422] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[   75.974055] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   75.974322] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   75.974355] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[   75.975314] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   75.975405] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[   75.975598] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[   75.975722] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[   75.975824] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[   75.975914] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[   75.976000] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[   75.976105] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[   75.976214] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[   75.976324] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[   75.976431] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[   75.976525] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[   75.976605] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[   75.976681] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[   75.976756] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[   75.976837] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[   75.978064] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[   75.978173] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (497 ms remaining)
<7>[   75.980812] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   75.980920] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   75.981004] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[   75.981114] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   76.107943] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[   76.481628] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[   76.523531] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   76.523840] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[   76.524128] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[   76.560418] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[   76.560713] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[   76.560985] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[   76.561317] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[   76.706815] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   76.706814] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   76.706815] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   76.852550] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[   76.854697] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[   76.855018] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[   76.858086] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[   76.859338] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[   76.860381] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[   76.861439] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[   76.862491] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[   76.863658] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[   76.863919] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[   76.865514] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[   76.865768] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[   76.866514] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[   76.866901] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]] 
<7>[   76.867179] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[   76.867495] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[   76.869316] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[   76.869335] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[   76.869642] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[   76.883638] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[   76.885935] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[   76.886294] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[   76.887672] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[   76.890256] Console: switching to colour frame buffer device 180x56
<6>[   76.905898] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[   76.927587] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[   76.927762] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]] 
<7>[   76.927810] xe 0000:00:02.0: [drm:drm_client_modeset_probe] 
<7>[   76.927965] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[   76.928366] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[   76.928648] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[   76.928689] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[   76.928761] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[   76.929127] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[   76.929502] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[   76.929894] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[   76.930241] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[   76.930428] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[   76.930617] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[   76.930974] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[   76.931328] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[   76.931396] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[   76.931705] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[   76.931853] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   76.932054] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[   76.932250] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[   76.932398] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[   76.932769] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[   76.932981] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[   76.933001] [drm] DisplayID checksum invalid, remainder is 248
<5>[   76.933007] [drm] DisplayID checksum invalid, remainder is 248
<7>[   76.933011] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[   76.933019] [drm] DisplayID checksum invalid, remainder is 248
<7>[   76.933023] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor 
<5>[   76.933037] [drm] DisplayID checksum invalid, remainder is 248
<7>[   76.933041] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[   76.933049] [drm] DisplayID checksum invalid, remainder is 248
<7>[   76.933107] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[   76.933170] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[   76.933465] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[   76.933498] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[   76.933896] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[   76.934304] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[   76.934594] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[   76.934643] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[   76.934944] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[   76.934954] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[   76.935255] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[   76.936625] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<5>[   76.937035] [drm] DisplayID checksum invalid, remainder is 248
<5>[   76.937043] [drm] DisplayID checksum invalid, remainder is 248
<5>[   76.937048] [drm] DisplayID checksum invalid, remainder is 248
<7>[   76.937142] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[   76.936976] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[   76.937185] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[   76.937217] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[   76.937246] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[   76.937353] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[   76.937848] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[   76.938312] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[   76.938742] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[   76.939121] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   76.939450] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   76.939837] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   76.940381] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[   76.940857] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[   76.940897] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[   76.940925] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[   76.941399] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[   76.941779] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[   76.941810] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[   76.941836] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[   76.942290] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[   76.942643] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[   76.942672] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[   76.942682] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[   76.942687] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[   76.942693] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[   76.943051] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[   76.943109] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[   76.943116] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[   76.943210] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[   76.945421] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[   76.945885] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[   76.947326] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[   76.952208] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[   76.969124] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[   76.969398] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[   76.969601] [IGT] xe_module_load: exiting, ret=0
<7>[   77.042028] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[   77.042141] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[   77.051260] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[   77.051376] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[   77.051454] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[   77.989100] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[   77.989074] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[   77.989077] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[   79.465005] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[   79.465328] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067