<5>[ 0.000000] Linux version 6.14.0-rc6-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Fri Mar 14 19:05:34 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fef5000 SMBIOS=0x6cbc7000 MEMATTR=0x68f39018 ESRT=0x68f71098 MOKvar=0x6cd0c000 TPMEventLog=0x6ff5a018
<6>[ 0.000000] efi: Remove mem256: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem258: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D86.2501240726 01/24/2025
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000011] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000377] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000378] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004650] esrt: Reserving ESRT space from 0x0000000068f71098 to 0x0000000068f711e8.
<7>[ 0.004658] e820: update [mem 0x68f71000-0x68f71fff] usable ==> reserved
<6>[ 0.004677] Using GB pages for direct mapping
<6>[ 0.005375] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005377] printk: early log buf free: 258888(98%)
<6>[ 0.005377] Secure boot disabled
<6>[ 0.005379] ACPI: Early table checksum verification disabled
<6>[ 0.005382] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005385] ACPI: XSDT 0x000000006FF71228 0001A4 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005389] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005391] ACPI: DSDT 0x000000006FFB6000 0254DE (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005393] ACPI: FACS 0x000000006FED9000 000040
<6>[ 0.005394] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005396] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005397] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005399] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005401] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005403] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005404] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005405] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005407] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005408] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005409] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005411] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005412] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005413] ACPI: SSDT 0x000000006FFDD000 009156 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005414] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005416] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005417] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005418] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005420] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005421] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005422] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005423] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005425] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005426] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005427] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005428] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005430] ACPI: SSDT 0x000000006FF85000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005431] ACPI: TPM2 0x000000006FF84000 00004C (v04 INTEL LNL 00000002 01000013)
<6>[ 0.005432] ACPI: LPIT 0x000000006FF83000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005434] ACPI: SSDT 0x000000006FF82000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005435] ACPI: SSDT 0x000000006FF81000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005436] ACPI: DBGP 0x000000006FF80000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005437] ACPI: DBG2 0x000000006FF7F000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005439] ACPI: NHLT 0x000000006FF7E000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005440] ACPI: SSDT 0x000000006FF7C000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005441] ACPI: SSDT 0x000000006FF75000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005443] ACPI: ECDT 0x000000006FF74000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005444] ACPI: DMAR 0x000000006FF73000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005445] ACPI: FPDT 0x000000006FF72000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005446] ACPI: SSDT 0x000000006FFA8000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005448] ACPI: SSDT 0x000000006FF6F000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005449] ACPI: SSDT 0x000000006FF6C000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005450] ACPI: SDEV 0x000000006FF6B000 000046 (v01 00000000 00000000)
<6>[ 0.005452] ACPI: SSDT 0x000000006FF60000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005453] ACPI: PHAT 0x000000006FF5F000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005454] ACPI: BGRT 0x000000006FF5E000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005455] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113]
<6>[ 0.005456] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb4dd]
<6>[ 0.005457] ACPI: Reserving FACS table memory at [mem 0x6fed9000-0x6fed903f]
<6>[ 0.005457] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005457] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005457] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005459] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005459] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005459] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005459] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005460] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005460] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005460] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f]
<6>[ 0.005460] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6155]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df]
<6>[ 0.005461] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2]
<6>[ 0.005462] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e]
<6>[ 0.005462] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955]
<6>[ 0.005462] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037]
<6>[ 0.005462] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005463] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7]
<6>[ 0.005463] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b]
<6>[ 0.005463] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2]
<6>[ 0.005464] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320]
<6>[ 0.005464] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469]
<6>[ 0.005464] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815]
<6>[ 0.005464] ACPI: Reserving SSDT table memory at [mem 0x6ff85000-0x6ff8560d]
<6>[ 0.005465] ACPI: Reserving TPM2 table memory at [mem 0x6ff84000-0x6ff8404b]
<6>[ 0.005465] ACPI: Reserving LPIT table memory at [mem 0x6ff83000-0x6ff830cb]
<6>[ 0.005465] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff82d5b]
<6>[ 0.005465] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff811ef]
<6>[ 0.005466] ACPI: Reserving DBGP table memory at [mem 0x6ff80000-0x6ff80033]
<6>[ 0.005466] ACPI: Reserving DBG2 table memory at [mem 0x6ff7f000-0x6ff7f053]
<6>[ 0.005466] ACPI: Reserving NHLT table memory at [mem 0x6ff7e000-0x6ff7e2e2]
<6>[ 0.005467] ACPI: Reserving SSDT table memory at [mem 0x6ff7c000-0x6ff7d15b]
<6>[ 0.005467] ACPI: Reserving SSDT table memory at [mem 0x6ff75000-0x6ff7b53a]
<6>[ 0.005467] ACPI: Reserving ECDT table memory at [mem 0x6ff74000-0x6ff74068]
<6>[ 0.005467] ACPI: Reserving DMAR table memory at [mem 0x6ff73000-0x6ff730d7]
<6>[ 0.005468] ACPI: Reserving FPDT table memory at [mem 0x6ff72000-0x6ff72043]
<6>[ 0.005468] ACPI: Reserving SSDT table memory at [mem 0x6ffa8000-0x6ffa886c]
<6>[ 0.005468] ACPI: Reserving SSDT table memory at [mem 0x6ff6f000-0x6ff703da]
<6>[ 0.005469] ACPI: Reserving SSDT table memory at [mem 0x6ff6c000-0x6ff6e462]
<6>[ 0.005469] ACPI: Reserving SDEV table memory at [mem 0x6ff6b000-0x6ff6b045]
<6>[ 0.005469] ACPI: Reserving SSDT table memory at [mem 0x6ff60000-0x6ff6a4f9]
<6>[ 0.005469] ACPI: Reserving PHAT table memory at [mem 0x6ff5f000-0x6ff5f7bf]
<6>[ 0.005470] ACPI: Reserving BGRT table memory at [mem 0x6ff5e000-0x6ff5e037]
<6>[ 0.005537] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005745] No NUMA configuration found
<6>[ 0.005745] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005750] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005861] Zone ranges:
<6>[ 0.005861] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005862] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005863] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005863] Device empty
<6>[ 0.005864] Movable zone start for each node
<6>[ 0.005865] Early memory node ranges
<6>[ 0.005865] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005866] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005866] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005867] node 0: [mem 0x0000000104500000-0x000000087f7fffff]
<6>[ 0.005868] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005872] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005889] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007905] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036388] On node 0, zone Normal: 17664 pages in unavailable ranges
<6>[ 0.036454] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036946] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036952] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037002] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037004] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037005] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037008] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037009] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037020] e820: update [mem 0x68f52000-0x68f6cfff] usable ==> reserved
<6>[ 0.037026] TSC deadline timer available
<6>[ 0.037027] CPU topo: Max. logical packages: 1
<6>[ 0.037028] CPU topo: Max. logical dies: 1
<6>[ 0.037028] CPU topo: Max. dies per package: 1
<6>[ 0.037029] CPU topo: Max. threads per core: 1
<6>[ 0.037030] CPU topo: Num. cores per package: 8
<6>[ 0.037030] CPU topo: Num. threads per package: 8
<6>[ 0.037030] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037043] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037044] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037045] PM: hibernation: Registered nosave memory: [mem 0x68f52000-0x68f6cfff]
<6>[ 0.037046] PM: hibernation: Registered nosave memory: [mem 0x68f71000-0x68f71fff]
<6>[ 0.037047] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037047] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037047] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037048] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037049] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037049] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037049] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037050] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1044fffff]
<6>[ 0.037051] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037052] Booting paravirtualized kernel on bare hardware
<6>[ 0.037054] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037063] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037397] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037402] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037403] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037417] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[ 0.037502] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037516] random: crng init done
<6>[ 0.039350] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040255] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040310] Fallback order for Node 0: 0
<6>[ 0.040312] Built 1 zonelists, mobility grouping on. Total pages: 8289632
<6>[ 0.040313] Policy zone: Normal
<6>[ 0.040323] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[ 0.040323] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040325] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041258] software IO TLB: area num 8.
<4>[ 0.087432] **********************************************************
<4>[ 0.087433] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.087433] ** **
<4>[ 0.087434] ** This system shows unhashed kernel memory addresses **
<4>[ 0.087434] ** via the console, logs, and other interfaces. This **
<4>[ 0.087434] ** might reduce the security of your system. **
<4>[ 0.087434] ** **
<4>[ 0.087434] ** If you see this message and you are not debugging **
<4>[ 0.087435] ** the kernel, report this immediately to your system **
<4>[ 0.087435] ** administrator! **
<4>[ 0.087435] ** **
<4>[ 0.087435] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.087435] **********************************************************
<6>[ 0.088509] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088825] ftrace: allocating 59560 entries in 233 pages
<6>[ 0.114060] ftrace: allocated 233 pages with 5 groups
<6>[ 0.115278] Dynamic Preempt: voluntary
<6>[ 0.115721] Running RCU self tests
<6>[ 0.115722] Running RCU synchronous self tests
<6>[ 0.115722] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115723] rcu: RCU lockdep checking is enabled.
<6>[ 0.115723] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115724] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115724] Rude variant of Tasks RCU enabled.
<6>[ 0.115724] Tracing variant of Tasks RCU enabled.
<6>[ 0.115724] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115725] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115763] Running RCU synchronous self tests
<6>[ 0.115767] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115770] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115772] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125779] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.126235] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126565] Console: colour dummy device 80x25
<6>[ 0.126573] printk: legacy console [tty0] enabled
<6>[ 0.127794] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127802] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127805] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127809] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127812] ... CLASSHASH_SIZE: 4096
<6>[ 0.127816] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127820] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127824] ... CHAINHASH_SIZE: 262144
<6>[ 0.127827] memory used by lock dependency info: 54145 kB
<6>[ 0.127832] memory used for stack traces: 4224 kB
<6>[ 0.127836] per task-struct memory footprint: 1920 bytes
<6>[ 0.127888] ACPI: Core revision 20240827
<6>[ 0.128792] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128856] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128862] DMAR: Host address width 38
<6>[ 0.128866] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128897] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128932] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128955] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128982] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.129004] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.129038] DMAR: SATC flags: 0x1
<6>[ 0.129048] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.129053] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.129058] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.131100] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.136140] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.136159] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.136233] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.136239] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.136419] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.136424] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.136434] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.136442] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.136448] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136456] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136463] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136480] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136487] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136492] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136497] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136503] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136509] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136514] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136519] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136524] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.137153] Freeing SMP alternatives memory: 48K
<6>[ 0.137153] pid_max: default: 32768 minimum: 301
<6>[ 0.137153] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.137153] landlock: Up and running.
<6>[ 0.137153] Yama: becoming mindful.
<6>[ 0.137153] AppArmor: AppArmor initialized
<6>[ 0.137153] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.137153] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.137153] Running RCU synchronous self tests
<6>[ 0.137153] Running RCU synchronous self tests
<6>[ 0.137153] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.137153] Running RCU Tasks wait API self tests
<6>[ 0.137153] Running RCU Tasks Rude wait API self tests
<6>[ 0.137153] Running RCU Tasks Trace wait API self tests
<6>[ 0.137153] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.137153] core: cpu_core PMU driver:
<6>[ 0.137158] ... version: 6
<6>[ 0.137162] ... bit width: 48
<6>[ 0.137165] ... generic registers: 10
<6>[ 0.137169] ... value mask: 0000ffffffffffff
<6>[ 0.137173] ... max period: 00007fffffffffff
<6>[ 0.137177] ... fixed-purpose events: 4
<6>[ 0.137181] ... event mask: 0001000f000003ff
<6>[ 0.137211] signal: max sigframe size: 3632
<6>[ 0.137232] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.137319] rcu: Hierarchical SRCU implementation.
<6>[ 0.137323] rcu: Max phase no-delay instances is 400.
<6>[ 0.137462] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139288] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.139541] smp: Bringing up secondary CPUs ...
<6>[ 0.139888] smpboot: x86: Booting SMP configuration:
<6>[ 0.139894] .... node #0, CPUs: #1 #2 #3
<6>[ 0.143369] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.146721] #4 #5 #6 #7
<6>[ 0.010733] core: cpu_atom PMU driver:
<6>[ 0.010733] ... version: 6
<6>[ 0.010733] ... bit width: 48
<6>[ 0.010733] ... generic registers: 8
<6>[ 0.010733] ... value mask: 0000ffffffffffff
<6>[ 0.010733] ... max period: 00007fffffffffff
<6>[ 0.010733] ... fixed-purpose events: 6
<6>[ 0.010733] ... event mask: 00000077000000ff
<6>[ 0.155283] smp: Brought up 1 node, 8 CPUs
<6>[ 0.156287] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.158287] Memory: 32360004K/33158528K available (24294K kernel code, 5580K rwdata, 9276K rodata, 5624K init, 68408K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.158718] devtmpfs: initialized
<6>[ 0.159334] x86/mm: Memory block size: 128MB
<6>[ 0.175705] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.176487] Running RCU synchronous self tests
<6>[ 0.176500] Running RCU synchronous self tests
<6>[ 0.176516] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.176516] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.176516] pinctrl core: initialized pinctrl subsystem
<6>[ 0.177454] PM: RTC time: 05:16:51, date: 2025-03-15
<6>[ 0.178348] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.179285] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.179588] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.179889] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.179950] audit: initializing netlink subsys (disabled)
<5>[ 0.180244] audit: type=2000 audit(1742015811.044:1): state=initialized audit_enabled=0 res=1
<6>[ 0.180899] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.180901] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.180907] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.180912] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.180916] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.180958] EISA bus registered
<6>[ 0.181158] cpuidle: using governor ladder
<6>[ 0.181186] cpuidle: using governor menu
<6>[ 0.181257] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.181622] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.181649] PCI: Using configuration type 1 for base access
<6>[ 0.181789] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.183417] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.183417] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.183417] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.183417] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.206155] raid6: avx2x4 gen() 57509 MB/s
<6>[ 0.223154] raid6: avx2x2 gen() 82940 MB/s
<6>[ 0.240159] raid6: avx2x1 gen() 75093 MB/s
<6>[ 0.240163] raid6: using algorithm avx2x2 gen() 82940 MB/s
<6>[ 0.257154] raid6: .... xor() 57804 MB/s, rmw enabled
<6>[ 0.257159] raid6: using avx2x2 recovery algorithm
<6>[ 0.259153] fbcon: Taking over console
<6>[ 0.259457] ACPI: Added _OSI(Module Device)
<6>[ 0.259465] ACPI: Added _OSI(Processor Device)
<6>[ 0.259472] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.259479] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.815086] ACPI: 32 ACPI AML tables successfully acquired and loaded
<6>[ 0.854823] ACPI: EC: EC started
<6>[ 0.854848] ACPI: EC: interrupt blocked
<6>[ 0.862133] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.862146] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.901691] Callback from call_rcu_tasks() invoked.
<6>[ 1.194424] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.194434] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.220845] ACPI: Interpreter enabled
<6>[ 1.220935] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.220939] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.226193] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.226200] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.244798] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.244848] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.323574] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.324362] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.333035] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.680888] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.694300] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.831295] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.833143] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.841283] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.850364] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.850603] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.850839] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.963958] ACPI: \: Can't tag data node
<3>[ 1.965087] ACPI: \: Can't tag data node
<3>[ 1.966225] ACPI: \: Can't tag data node
<3>[ 1.967263] ACPI: \: Can't tag data node
<3>[ 1.968380] ACPI: \: Can't tag data node
<6>[ 2.159052] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.159970] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.160783] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.162438] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.163227] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.165433] ACPI: \PIN_: New power resource
<6>[ 2.170928] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.170957] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.176370] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.191520] PCI host bridge to bus 0000:00
<6>[ 2.191578] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.191592] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.191604] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.191617] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.191630] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.191644] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.196164] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.197170] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.197170] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.197170] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.197170] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.197170] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.199509] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.199543] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 2.202174] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.202214] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.202227] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 2.203644] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.203688] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.203702] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.203723] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.203869] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.203939] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.210538] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.210586] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.210601] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.210621] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.210758] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.210812] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.217455] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.217500] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.217514] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.217534] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.217669] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.217722] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.225563] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.225615] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 2.225634] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.225901] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.225940] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.225951] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 2.226497] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.226560] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 2.226644] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.229283] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.229358] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 2.229370] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 2.229455] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.229462] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.231472] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.231550] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 2.231563] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 2.231652] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.231658] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.233772] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.233847] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 2.233933] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.237114] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.237230] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 2.237704] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.238095] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.238147] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 2.238212] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.239963] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.240027] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 2.240036] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 2.240328] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.240439] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.241908] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.242019] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.243382] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.243492] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.244832] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.244943] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.246385] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.246483] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 2.246579] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.248932] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.248965] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.248973] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.248981] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.249104] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.249378] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.253708] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.253812] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.253843] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.254204] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.254594] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.259535] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.260949] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.261064] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 2.261079] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 2.261215] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.262011] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.262079] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 2.262092] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.263208] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.263391] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.263627] pci 0000:00:1f.6: [8086:550f] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.263712] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.263802] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.265072] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.265472] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.265630] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.265806] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.265878] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.265888] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.265897] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.266061] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.266065] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.266628] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.268454] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.269205] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.269262] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.270393] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.270451] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.704307] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 12.852317] Low-power S0 idle used by default for system suspend
<6>[ 12.938381] ACPI: EC: interrupt unblocked
<6>[ 12.938405] ACPI: EC: event unblocked
<6>[ 12.938448] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 12.938459] ACPI: EC: GPE=0x6e
<6>[ 12.938470] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 12.938486] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 12.940421] iommu: Default domain type: Translated
<6>[ 12.940421] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 12.942441] SCSI subsystem initialized
<7>[ 12.942540] libata version 3.00 loaded.
<6>[ 12.942540] ACPI: bus type USB registered
<6>[ 12.942540] usbcore: registered new interface driver usbfs
<6>[ 12.942574] usbcore: registered new interface driver hub
<6>[ 12.942637] usbcore: registered new device driver usb
<6>[ 12.943217] pps_core: LinuxPPS API ver. 1 registered
<6>[ 12.943225] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 12.943257] PTP clock support registered
<6>[ 12.944417] EDAC MC: Ver: 3.0.0
<6>[ 12.949266] efivars: Registered efivars operations
<6>[ 12.951893] NetLabel: Initializing
<6>[ 12.951904] NetLabel: domain hash size = 128
<6>[ 12.951911] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 12.952022] NetLabel: unlabeled traffic allowed by default
<6>[ 12.952046] mctp: management component transport protocol core
<6>[ 12.952054] NET: Registered PF_MCTP protocol family
<6>[ 12.952115] PCI: Using ACPI for IRQ routing
<7>[ 12.968714] PCI: pci_cache_line_size set to 64 bytes
<6>[ 12.969001] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 12.969142] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 12.969157] e820: reserve RAM buffer [mem 0x68f52000-0x6bffffff]
<7>[ 12.969161] e820: reserve RAM buffer [mem 0x68f71000-0x6bffffff]
<7>[ 12.969165] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 12.969169] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 12.969547] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 12.969547] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 12.969547] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 12.969547] vgaarb: loaded
<6>[ 12.970287] clocksource: Switched to clocksource tsc-early
<5>[ 12.971632] VFS: Disk quotas dquot_6.6.0
<6>[ 12.971668] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 12.972974] AppArmor: AppArmor Filesystem Enabled
<6>[ 12.973257] pnp: PnP ACPI init
<6>[ 12.974663] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 12.974684] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 12.976759] system 00:02: [io 0x06a4] has been reserved
<6>[ 12.976776] system 00:02: [io 0x06a0] has been reserved
<6>[ 13.007696] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 13.007727] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 13.007751] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 13.007765] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 13.007781] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 13.007796] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 13.007811] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 13.007824] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 13.012994] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 13.016675] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 13.016921] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 13.024898] pnp: PnP ACPI: found 8 devices
<6>[ 13.038886] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 13.039944] NET: Registered PF_INET protocol family
<6>[ 13.040197] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.043783] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 13.044090] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 13.044352] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 13.045387] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 13.047445] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 13.048054] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 13.049402] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 13.050776] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 13.050878] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 13.050895] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 13.050910] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 13.050970] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 13.050980] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 13.050989] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 13.051000] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 13.051055] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 13.051110] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 13.051163] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 13.051217] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 13.051262] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 13.051276] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 13.051288] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 13.051299] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.051322] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 13.051331] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 13.051342] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 13.051353] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.051369] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 13.051377] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 13.051389] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 13.051400] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.051423] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 13.051431] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 13.051442] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 13.051456] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 13.051494] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 13.051543] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 13.051552] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 13.051560] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 13.051568] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 13.051577] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 13.051587] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 13.051594] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 13.051602] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 13.051612] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 13.051619] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 13.051627] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 13.051637] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 13.051644] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 13.051652] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 13.051662] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 13.051670] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 13.051678] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 13.052987] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 13.055096] PCI: CLS 0 bytes, default 64
<6>[ 13.055227] DMAR: No RMRR found
<6>[ 13.055240] DMAR: No ATSR found
<6>[ 13.055246] DMAR: dmar1: Using Queued invalidation
<6>[ 13.055272] DMAR: dmar0: Using Queued invalidation
<6>[ 13.055282] DMAR: dmar2: Using Queued invalidation
<6>[ 13.056329] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 13.056425] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 13.056506] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 13.056576] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 13.060640] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 13.062277] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 13.062363] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 13.062449] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 13.062527] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 13.062633] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 13.062683] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 13.062749] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 13.062830] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 13.062912] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 13.063001] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 13.063054] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 13.063165] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 13.063221] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 13.063275] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 13.063330] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 13.063409] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 13.063479] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 13.063571] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 13.063693] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 13.063754] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 13.063808] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 13.063865] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 13.063924] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 13.064001] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 13.064100] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 13.076967] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 13.076983] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 13.076992] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 13.083403] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 13.083635] clocksource: Switched to clocksource tsc
<6>[ 13.084544] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 13.091492] Initialise system trusted keyrings
<5>[ 13.091582] Key type blacklist registered
<6>[ 13.092069] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 13.101878] zbud: loaded
<6>[ 13.103300] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 13.103442] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 13.103450] ntfs3: Read-only LZX/Xpress compression included
<5>[ 13.103967] integrity: Platform Keyring initialized
<5>[ 13.103993] integrity: Machine keyring initialized
<6>[ 13.110201] xor: automatically using best checksumming function avx
<5>[ 13.110212] Key type asymmetric registered
<5>[ 13.110226] Asymmetric key parser 'x509' registered
<6>[ 13.110369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 13.110889] io scheduler mq-deadline registered
<6>[ 13.112476] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 13.114214] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 13.114755] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 13.115973] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 13.116455] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 13.117649] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 13.118135] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 13.119222] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 13.119678] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 13.121184] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 13.121724] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 13.122324] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 13.125265] Monitor-Mwait will be used to enter C-1 state
<7>[ 13.125411] Monitor-Mwait will be used to enter C-2 state
<7>[ 13.125469] Monitor-Mwait will be used to enter C-3 state
<6>[ 13.132117] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 13.132320] ACPI: button: Lid Switch [LID0]
<6>[ 13.132570] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 13.132748] ACPI: button: Sleep Button [SLPB]
<6>[ 13.132955] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 13.133360] ACPI: button: Power Button [PWRB]
<6>[ 13.264211] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 13.264234] ACPI: thermal: Thermal Zone [TZ00] (48 C)
<6>[ 13.266776] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 13.268283] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 13.272251] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 13.291489] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 13.327770] serial 0000:00:12.0: enabling device (0000 -> 0002)
<4>[ 13.332886] hpet_acpi_add: no address or irqs in _CRS
<6>[ 13.333089] Linux agpgart interface v0.103
<6>[ 13.364762] ACPI: bus type drm_connector registered
<6>[ 13.392214] loop: module loaded
<6>[ 13.439806] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.530761] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.667858] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 13.793888] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 13.913565] Key type psk registered
<6>[ 13.916386] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 13.917115] tun: Universal TUN/TAP device driver, 1.6
<6>[ 13.917156] nvme nvme0: pci function 0000:80:00.0
<6>[ 13.918845] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.918958] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 13.920904] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.922789] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.922817] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 13.922839] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.923355] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.923378] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.923388] usb usb1: Product: xHCI Host Controller
<6>[ 13.923395] usb usb1: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.923404] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 13.924865] hub 1-0:1.0: USB hub found
<6>[ 13.924989] hub 1-0:1.0: 1 port detected
<6>[ 13.928817] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.928836] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.928848] usb usb2: Product: xHCI Host Controller
<6>[ 13.928856] usb usb2: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.928866] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 13.929636] hub 2-0:1.0: USB hub found
<6>[ 13.929688] hub 2-0:1.0: 3 ports detected
<6>[ 13.952887] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 13.959253] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.959312] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 13.961835] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.964809] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.964849] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 13.964889] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.965286] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.965310] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.965327] usb usb3: Product: xHCI Host Controller
<6>[ 13.965340] usb usb3: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.965355] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 13.966953] hub 3-0:1.0: USB hub found
<6>[ 13.967032] hub 3-0:1.0: 8 ports detected
<6>[ 13.968546] nvme0n1: p1 p2
<6>[ 14.022997] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 14.023027] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 14.023045] usb usb4: Product: xHCI Host Controller
<6>[ 14.023057] usb usb4: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 14.023071] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 14.024178] hub 4-0:1.0: USB hub found
<6>[ 14.024246] hub 4-0:1.0: 2 ports detected
<6>[ 14.036513] usbcore: registered new interface driver usb-storage
<6>[ 14.036723] usbcore: registered new interface driver usbserial_generic
<6>[ 14.036892] usbserial: USB Serial support registered for generic
<6>[ 14.036984] usbcore: registered new interface driver ftdi_sio
<6>[ 14.037044] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 14.037128] usbcore: registered new interface driver pl2303
<6>[ 14.037189] usbserial: USB Serial support registered for pl2303
<6>[ 14.037387] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 14.037403] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 14.755720] i8042: Can't read CTR while initializing i8042
<3>[ 14.755778] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 14.759701] mousedev: PS/2 mouse device common for all mice
<6>[ 14.765812] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 14.769494] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 14.769825] rtc_cmos rtc_cmos: setting system clock to 2025-03-15T05:17:05 UTC (1742015825)
<6>[ 14.770217] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 14.770351] i2c_dev: i2c /dev entries driver
<6>[ 14.779354] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 14.779388] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 14.779411] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 14.779488] device-mapper: uevent: version 1.0.3
<6>[ 14.780409] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 14.780665] platform eisa.0: Probing EISA bus 0
<4>[ 14.780691] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 14.780721] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 14.780763] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 14.780790] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 14.780816] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 14.780841] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 14.780867] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 14.780892] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 14.780917] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 14.780938] platform eisa.0: EISA: Detected 0 cards
<6>[ 14.780958] intel_pstate: Intel P-state driver initializing
<6>[ 14.784249] Hybrid CPU capacity scaling enabled
<6>[ 14.785155] intel_pstate: HWP enabled
<6>[ 14.785160] sdhci: Secure Digital Host Controller Interface driver
<6>[ 14.785166] sdhci: Copyright(c) Pierre Ossman
<6>[ 14.785265] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 14.787137] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 14.787780] drop_monitor: Initializing network drop monitor service
<6>[ 14.787989] NET: Registered PF_INET6 protocol family
<6>[ 14.790231] Segment Routing with IPv6
<6>[ 14.790269] In-situ OAM (IOAM) with IPv6
<6>[ 14.790311] NET: Registered PF_PACKET protocol family
<5>[ 14.790430] Key type dns_resolver registered
<4>[ 14.793347] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 14.793622] microcode: Current revision: 0x0000011c
<6>[ 14.794049] IPI shorthand broadcast: enabled
<6>[ 14.804146] sched_clock: Marking stable (14794002381, 9733488)->(14885942847, -82206978)
<6>[ 14.804872] registered taskstats version 1
<5>[ 14.805827] Loading compiled-in X.509 certificates
<6>[ 14.834461] Demotion targets for Node 0: null
<6>[ 14.834635] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 14.834639] kmemleak: Automatic memory scanning thread started
<5>[ 14.834841] Key type .fscrypt registered
<5>[ 14.834846] Key type fscrypt-provisioning registered
<6>[ 14.837396] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 14.837504] Key type trusted registered
<5>[ 14.839279] Key type encrypted registered
<6>[ 14.839288] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 14.839401] Loading compiled-in module X.509 certificates
<5>[ 14.840134] Loaded X.509 cert 'Build time autogenerated kernel key: a5b089a75eb368add3b09e7758283129b5a35066'
<6>[ 14.840145] ima: Allocated hash algorithm: sha256
<6>[ 14.858460] ima: No architecture policies found
<6>[ 14.858601] evm: Initialising EVM extended attributes:
<6>[ 14.858607] evm: security.selinux
<6>[ 14.858611] evm: security.SMACK64
<6>[ 14.858615] evm: security.SMACK64EXEC
<6>[ 14.858619] evm: security.SMACK64TRANSMUTE
<6>[ 14.858624] evm: security.SMACK64MMAP
<6>[ 14.858628] evm: security.apparmor
<6>[ 14.858632] evm: security.ima
<6>[ 14.858636] evm: security.capability
<6>[ 14.858640] evm: HMAC attrs: 0x1
<6>[ 14.860963] PM: Magic number: 1:356:264
<6>[ 14.861098] memory memory134: hash matches
<6>[ 14.861217] printk: legacy console [netcon0] enabled
<6>[ 14.861223] netconsole: network logging started
<6>[ 14.861814] RAS: Correctable Errors collector initialized.
<6>[ 14.861972] clk: Disabling unused clocks
<6>[ 14.861984] PM: genpd: Disabling unused power domains
<6>[ 14.862520] md: Waiting for all devices to be available before autodetect
<6>[ 14.862527] md: If you don't use raid, use raid=noautodetect
<6>[ 14.862534] md: Autodetecting RAID arrays.
<6>[ 14.862822] md: autorun ...
<6>[ 14.862827] md: ... autorun DONE.
<6>[ 14.905546] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none.
<6>[ 14.905610] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 14.906414] devtmpfs: mounted
<6>[ 14.917620] Freeing unused decrypted memory: 2028K
<6>[ 14.918528] Freeing unused kernel image (initmem) memory: 5624K
<6>[ 14.918551] Write protecting the kernel read-only data: 34816k
<6>[ 14.919022] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[ 14.919283] Freeing unused kernel image (rodata/data gap) memory: 964K
<6>[ 14.923958] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 14.923983] Run /sbin/init as init process
<7>[ 14.923988] with arguments:
<7>[ 14.923989] /sbin/init
<7>[ 14.923990] with environment:
<7>[ 14.923990] HOME=/
<7>[ 14.923991] TERM=linux
<7>[ 14.923992] BOOT_IMAGE=/boot/drm_intel
<7>[ 14.971749] systemd[1]: Inserted module 'autofs4'
<7>[ 14.993368] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 14.993421] systemd[1]: Detected architecture x86-64.
<7>[ 14.995295] systemd[1]: Hostname set to <shard-lnl-5>.
<7>[ 15.259132] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.298439] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.300362] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.301615] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.301868] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.302475] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 15.302584] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC...
<7>[ 15.302664] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.302751] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.302825] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.302892] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.302964] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.303205] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.303568] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.303839] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.304143] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.304381] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.304568] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.304843] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.305149] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.305407] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.305574] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.305860] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.306124] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 15.309096] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 15.311649] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 15.314438] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 15.317596] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 15.323529] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 15.326894] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 15.329679] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 15.332490] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 15.335772] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 15.338319] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 15.341148] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 15.343837] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 15.348746] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 15.354996] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 15.360839] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 15.361039] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 15.361515] systemd-journald[212]: Collecting audit messages is disabled.
<7>[ 15.366149] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 15.370206] pstore: Using crash dump compression: deflate
<7>[ 15.373444] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 15.373552] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.373624] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<6>[ 15.374336] fuse: init (API version 7.42)
<7>[ 15.379025] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 15.379934] pstore: Registered efi_pstore as persistent store backend
<7>[ 15.385551] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.540769] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. Quota mode: none.
<6>[ 15.572970] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:411435008k SS
<7>[ 15.584818] systemd-journald[212]: Received client request to flush runtime journal.
<7>[ 15.599176] systemd-journald[212]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 15.599187] systemd-journald[212]: Rotating system journal.
<4>[ 16.278155] nvme nvme0: using unchecked data buffer
<4>[ 16.424251] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424274] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424299] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424323] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424348] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424373] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424397] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424422] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424446] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424471] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424496] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424520] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424545] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424570] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424594] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424619] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424643] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424680] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424704] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424728] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424757] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424778] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424802] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424827] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424852] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424888] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424912] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.424984] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425007] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425032] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425056] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425081] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425129] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425153] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425177] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425202] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425226] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.425251] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.434587] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 16.438258] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438282] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438307] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438335] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438356] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438380] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438417] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438441] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438653] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438723] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438771] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438819] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438948] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438972] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.438996] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439033] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439061] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439073] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439086] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439098] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439111] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439123] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439136] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439148] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439161] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439173] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439186] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439198] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439211] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.439223] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459460] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459484] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459504] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459524] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459544] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459564] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459584] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459660] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459680] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459700] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459720] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459814] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459831] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459851] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459871] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.459882] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<4>[ 16.459892] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459911] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459932] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459979] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.459999] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460019] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460039] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460089] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460109] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460128] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460165] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460185] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460204] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460224] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460246] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460266] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460286] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460306] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460326] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460346] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460366] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460385] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460405] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.460425] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.475286] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 16.483969] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 16.513423] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513447] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.538102] pci 0000:00:05.0: Setting to D3hot
<6>[ 16.549902] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.558399] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558428] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558448] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558468] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558487] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558507] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558527] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558547] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558567] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558623] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558643] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558712] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558731] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558784] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558804] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558824] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558844] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558890] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558922] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558942] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558962] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.558984] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559004] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559023] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559043] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559080] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559115] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559135] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559155] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559189] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559209] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559229] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559249] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559269] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559289] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559309] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559329] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559348] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559368] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559388] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559408] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559428] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559448] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559468] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.559488] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.562548] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.562914] intel_pmc_core INT33A1:00: initialized
<5>[ 16.639639] audit: type=1400 audit(1742015827.367:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=432 comm="apparmor_parser"
<5>[ 16.639659] audit: type=1400 audit(1742015827.367:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=433 comm="apparmor_parser"
<5>[ 16.640859] audit: type=1400 audit(1742015827.368:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=430 comm="apparmor_parser"
<5>[ 16.641252] audit: type=1400 audit(1742015827.369:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=429 comm="apparmor_parser"
<5>[ 16.641492] audit: type=1400 audit(1742015827.369:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=431 comm="apparmor_parser"
<5>[ 16.648533] audit: type=1400 audit(1742015827.376:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=434 comm="apparmor_parser"
<5>[ 16.651911] audit: type=1400 audit(1742015827.380:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=435 comm="apparmor_parser"
<5>[ 16.654236] audit: type=1400 audit(1742015827.382:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=436 comm="apparmor_parser"
<5>[ 16.661796] audit: type=1400 audit(1742015827.390:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=439 comm="apparmor_parser"
<5>[ 16.667081] audit: type=1400 audit(1742015827.395:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=441 comm="apparmor_parser"
<3>[ 16.709564] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 16.711677] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 16.937465] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 16.937979] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 16.951299] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 16.965665] ACPI: bus type thunderbolt registered
<6>[ 16.987247] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 17.013227] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 17.013231] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 17.013315] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 17.018947] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 17.047186] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 17.071884] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 17.071889] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 17.075140] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 17.102425] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 17.102869] intel_rapl_common: Found RAPL domain package
<6>[ 17.102876] intel_rapl_common: Found RAPL domain dram
<6>[ 17.131320] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 17.164534] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 176
<6>[ 17.164543] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 17.196840] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 17.212894] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
<6>[ 17.212902] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 17.212904] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 17.212905] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 17.212907] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 17.236235] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 17.258593] cryptd: max_cpu_qlen set to 1000
<6>[ 17.267238] AES CTR mode by8 optimization enabled
<4>[ 17.461133] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.467836] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.609798] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:90
<6>[ 17.609810] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 17.609938] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 17.723049] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 17.724538] evm: overlay not supported
<6>[ 17.749213] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 17.749222] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 17.749224] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 17.996854] loop0: detected capacity change from 0 to 8
<6>[ 17.999358] intel_rapl_common: Found RAPL domain package
<6>[ 17.999364] intel_rapl_common: Found RAPL domain core
<6>[ 17.999367] intel_rapl_common: Found RAPL domain dram
<6>[ 17.999368] intel_rapl_common: Found RAPL domain psys
<6>[ 18.016238] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 18.039457] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 18.055285] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 18.060284] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 18.072726] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 18.410765] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 18.485529] Consider using thermal netlink events interface
<6>[ 18.569996] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 18.748891] hid: raw HID events driver (C) Jiri Kosina
<6>[ 18.755004] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 18.790305] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.792594] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.794870] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.796020] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.798094] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.799019] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.803949] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.806641] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.809293] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.811924] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.814031] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.815771] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.640245] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 19.640309] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 20.615783] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 20.615819] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 22.150383] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<4>[ 29.298438] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<7>[ 36.458301] systemd-journald[212]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 52.226172] [IGT] xe_module_load: executing
<7>[ 52.236217] [IGT] xe_module_load: starting subtest load
<5>[ 52.428840] Setting dangerous option force_probe - tainting kernel
<6>[ 52.432028] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 52.433705] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 52.433714] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 52.433825] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 52.433907] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 52.438092] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 52.442175] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 52.442267] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 52.442341] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 52.442412] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 52.442481] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 52.442548] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 52.442614] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 52.442679] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 52.442753] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 52.442816] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 52.442878] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 52.442941] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 52.443000] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 52.443057] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 52.443114] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 52.443215] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 52.444113] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 52.444190] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 52.453797] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 52.454806] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 52.454925] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 52.455067] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 52.455189] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 52.455310] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 52.455412] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 52.455510] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 52.456229] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 52.460268] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 52.460351] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 52.460414] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 52.460474] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 52.460531] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 52.460588] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 52.460644] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 52.460701] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 52.460811] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 52.460872] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 52.460930] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 52.460984] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 52.461038] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 52.461090] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 52.462300] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 52.464275] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1345
<6>[ 52.465116] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 52.465202] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 52.465297] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 52.466733] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 52.466901] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000068 [0x34/00]
<7>[ 52.466972] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 52.486788] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 52.487274] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 52.487493] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 52.487715] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 52.487969] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 52.488165] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 52.488353] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 52.488577] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 52.489404] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 52.489779] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 52.490097] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6feec018
<7>[ 52.490411] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 52.490660] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 52.490909] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 52.491171] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 52.491388] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 52.491632] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 52.491850] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 52.492110] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 52.492339] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 52.492569] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 52.492812] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 52.493037] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 52.493254] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 52.493454] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 52.493678] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 52.493871] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 52.494050] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 52.494222] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 52.494378] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 52.494530] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 52.494698] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 52.494876] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 52.495032] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 52.495167] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 52.495301] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 52.495431] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 52.495576] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 52.495722] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 52.495866] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 52.496004] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 52.496140] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 52.496256] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 52.496374] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 52.496495] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 52.496611] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 52.496724] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 52.496854] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 52.496985] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 52.497540] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 52.497676] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 52.497820] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 52.497942] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 52.498048] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 52.498146] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 52.498251] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 52.498344] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 52.498433] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 52.498535] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 52.498635] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 52.498732] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 52.498846] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 52.498943] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 52.499035] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 52.499120] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 52.499203] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 52.499283] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 52.499362] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 52.499445] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 52.499528] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 52.499606] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 52.499682] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 52.499762] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 52.499844] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 52.499923] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 52.500000] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 52.500078] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 52.500190] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 52.500347] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 52.500488] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 52.500627] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 52.500801] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 52.500930] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 52.501023] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 52.501117] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 52.501237] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 52.501326] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 52.501349] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 52.501446] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 52.501537] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 52.501631] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 52.501976] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 52.502134] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 52.502613] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 52.502713] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 52.502812] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 52.502897] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 52.502979] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 52.503058] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 52.503132] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 52.503202] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 52.506459] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 52.506562] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 52.506656] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 52.506755] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 52.506867] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 52.506978] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 52.507093] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 52.507199] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 52.507302] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 52.507403] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 52.507487] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 52.507582] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 52.507682] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 52.507793] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 52.508237] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 52.508375] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 52.508499] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 52.508624] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 52.508753] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 52.508878] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 52.509000] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 52.509120] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 52.509242] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 52.509358] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 52.509475] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 52.509596] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 52.509720] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 52.509871] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 52.509991] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 52.510108] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 52.510238] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 52.513577] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 52.513750] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 52.513871] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 52.514058] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 52.514242] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 52.514463] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 52.514585] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 52.514687] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 52.514804] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 52.514901] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 52.514989] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 52.515075] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 52.515159] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 52.515241] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 52.515401] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 52.515634] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 52.515755] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 52.515855] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 52.515939] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 52.516018] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 52.516246] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 52.516538] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 52.517842] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 52.518178] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 52.521055] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<6>[ 52.521389] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 52.521778] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 52.522647] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 52.524421] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 52.524976] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 52.527778] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.537248] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.537263] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.537265] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.537267] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.537270] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.537272] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.537277] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.537279] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.537281] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.537326] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.537328] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.537329] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.537338] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.537901] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 52.538446] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 52.538550] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 52.538688] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 52.538833] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 52.539001] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 52.539101] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 52.539184] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 52.539259] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 52.539328] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 52.539428] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 52.539651] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 52.539849] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 52.539995] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 52.540479] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 52.540606] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 52.540730] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 52.541015] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 52.541133] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 52.541257] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 52.541840] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 52.541985] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 52.542108] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 52.542184] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 52.542258] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 52.542328] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 52.542398] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 52.542467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 52.542537] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 52.542605] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 52.542673] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 52.542747] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 52.542820] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 52.542889] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 52.542955] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 52.543023] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 52.543089] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 52.543156] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 52.543222] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 52.543288] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 52.543354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 52.544169] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 52.544299] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 52.544396] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 52.544489] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 52.544568] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 52.544638] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 52.544705] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 52.544786] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 52.544866] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 52.544937] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 52.545003] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 52.545067] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 52.545136] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 52.545210] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 52.545275] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 52.545339] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 52.545401] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 52.545504] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 52.545581] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 52.545650] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 52.545717] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 52.545999] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 52.546071] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 52.546134] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 52.546197] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 52.546259] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 52.546322] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 52.546385] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 52.546447] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 52.546510] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 52.546573] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 52.546634] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 52.546696] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 52.546765] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 52.546830] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 52.546892] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 52.546954] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 52.547017] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 52.547079] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 52.547292] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 52.547379] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 52.547456] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 52.547525] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 52.547645] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7>[ 52.547754] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7>[ 52.547895] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 52.547994] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 52.548218] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 52.548323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 52.548412] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 52.548496] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 52.548577] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 52.548655] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 52.548730] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 52.548815] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 52.548897] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 52.548974] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 52.549049] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 52.549122] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 52.549195] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 52.549267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 52.549340] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 52.549411] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 52.549483] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 52.549555] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 52.549630] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 52.549705] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 52.549783] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 52.549857] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 52.549928] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 52.549999] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 52.550070] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 52.550140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 52.550211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 52.550284] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 52.550355] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 52.550426] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 52.550497] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 52.550570] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 52.550642] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.550712] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.550789] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.550860] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 52.550930] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 52.551000] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.551071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.551141] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 52.551211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 52.551281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 52.551351] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 52.551760] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 52.551870] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 52.591846] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 52.663800] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 52.800822] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 52.800826] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 52.800827] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 52.800951] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 52.801102] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 52.801188] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 52.801266] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 52.801359] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 52.801446] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 52.801543] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 52.801611] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 52.801681] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 52.801764] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 52.802622] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 52.802696] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 52.802779] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 52.802850] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 52.802919] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 52.802990] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 52.803061] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 52.803133] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 52.803200] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 52.803265] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 52.803331] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 52.803395] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 52.803457] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 52.803519] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 52.803578] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 52.803638] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 52.803697] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 52.803766] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 52.803824] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 52.803883] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 52.803940] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 52.803996] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 52.804053] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 52.804111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 52.804169] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 52.804226] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 52.804289] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 52.804351] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 52.804413] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 52.804471] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 52.804528] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 52.804588] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 52.804647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 52.804704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 52.804771] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 52.804832] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 52.804900] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 52.804966] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 52.805234] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 52.805292] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 52.805346] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 52.805542] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 52.805596] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 52.805647] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 52.805845] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 52.805902] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 52.805956] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 52.806011] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 52.806069] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 52.806130] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 52.806568] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 52.806637] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 52.806699] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 52.806769] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 52.806828] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 52.806891] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 52.806955] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 52.807017] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 52.807078] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 52.807140] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 52.807195] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 52.807248] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 52.807301] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 52.807353] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 52.807424] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 52.807648] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 52.810350] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 52.823521] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 52.824113] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 52.824194] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 52.833979] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 52.834343] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 52.836378] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 52.836471] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 52.836555] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 52.836632] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 52.836710] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 52.836801] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 52.836876] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 52.836950] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 52.837026] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7>[ 52.840149] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 52.840246] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7>[ 52.840342] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 52.842964] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 52.846127] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 52.846130] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 52.846131] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 52.846132] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 52.846133] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 52.846134] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 52.846134] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 52.846135] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 52.846136] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 52.846137] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 52.846163] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 52.846278] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 52.846384] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 52.847003] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 52.847099] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 52.847188] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 52.847275] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 52.847357] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 52.847439] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 52.847519] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 52.847602] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[ 52.847678] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[ 52.847756] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[ 52.847840] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 52.847927] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 52.848011] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 52.848095] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 52.848181] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 52.848265] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 52.848346] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 52.848426] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 52.848504] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 52.848581] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 52.848656] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 52.848728] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 52.848817] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 52.848889] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 52.848963] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 52.849042] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 52.849115] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 52.849187] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 52.849258] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 52.849349] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 52.850132] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 52.850253] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 52.850700] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 52.850823] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 52.851405] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 52.851516] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 52.851623] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 52.851726] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 52.851851] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 52.851950] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 52.852045] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 52.852141] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 52.852234] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 52.852324] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 52.852414] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 52.852505] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 52.852593] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 52.852680] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 52.852821] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 52.852967] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 52.870011] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 52.871112] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 52.871256] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 52.891064] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 52.891499] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 52.892470] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 52.894857] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 52.898208] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 52.941408] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 52.945035] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 52.945417] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 52.945832] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 52.946167] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 52.946539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 52.946973] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.947332] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 52.947681] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 52.949632] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 52.950043] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 52.950372] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 52.952071] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 52.963727] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 52.969752] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 52.970630] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 52.973780] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 52.973897] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 52.974430] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 52.975377] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 52.975426] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 52.975903] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 52.976612] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 52.976650] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 52.977058] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 52.977698] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 52.977727] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 52.977822] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 52.985507] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 52.987950] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 52.989458] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 52.989635] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[ 52.989591] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 52.990812] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.990975] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.991110] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 52.991212] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.991326] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.991420] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 52.991506] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.991614] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.991706] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 52.991815] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 52.991785] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 52.991903] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 52.992012] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 52.992117] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 52.992317] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.992560] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.992575] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.993408] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.993982] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.994144] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.994251] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.994695] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.994705] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.994707] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.994709] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.994712] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.994714] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.994722] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.994724] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.994727] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.994788] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.994888] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.995578] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.995684] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 52.997009] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 52.997249] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.997252] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.997253] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.997294] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.997310] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.997321] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.997331] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.997508] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.997520] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.997528] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.997662] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.997672] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.997680] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.997808] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.997818] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.997824] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.997826] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.997828] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.997969] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.997995] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[ 52.997998] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 52.998026] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.998122] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 52.998141] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<7>[ 52.999264] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 53.005650] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01d96000
<6>[ 53.006533] fbcon: xedrmfb (fb0) is primary device
<7>[ 53.007681] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 53.007836] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 53.007966] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 53.008090] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 53.008205] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 53.008317] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 53.008427] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 53.008531] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 53.008631] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 53.008731] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 53.008861] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 53.008975] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 53.009086] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 53.009196] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 53.009304] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 53.009408] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 53.009497] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 53.009587] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 53.009691] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 53.009815] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 53.009920] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 53.010025] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 53.010128] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 53.010231] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 53.010339] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 53.010440] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 53.010526] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 53.010603] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 53.010677] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 53.010781] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 53.010892] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 53.011049] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 53.011161] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 53.011260] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 53.011351] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 53.011436] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 53.011520] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.011601] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.011683] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.011772] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.011869] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.011967] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012063] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012150] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012237] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.012321] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012405] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012479] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012551] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.012622] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012692] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012771] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.012854] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 53.012936] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.013018] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.013102] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 53.013180] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 53.013293] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 53.013396] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 53.013486] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 53.013574] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 53.013659] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 53.013778] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 53.013926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 53.014033] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 53.014128] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 53.014214] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 53.014298] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 53.014380] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 53.014464] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 53.014546] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 53.014626] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 53.014707] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 53.014808] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 53.014907] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 53.015004] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 53.015097] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 53.015182] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 53.015261] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 53.015341] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 53.015424] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 53.015506] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 53.015585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 53.015663] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 53.015748] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 53.015837] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 53.015926] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 53.016014] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.016098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 53.016166] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.016230] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 53.016295] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 53.016358] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 53.016421] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 53.016489] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 53.016558] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 53.016624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 53.016691] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 53.016770] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 53.016858] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 53.016947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.017036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.017116] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.017186] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.017255] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.017323] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 53.017390] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.017455] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.017520] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 53.017585] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 53.017649] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 53.017716] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 53.017803] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 53.017890] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 53.017974] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 53.018057] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 53.018135] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 53.018202] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 53.018732] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 53.045862] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 53.046321] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 53.069178] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 53.223938] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 53.224559] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 53.245314] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 53.245671] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 53.245692] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 53.246061] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 53.246116] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 53.298273] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 53.298586] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 53.328986] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 53.329578] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 53.329641] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 53.331045] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 53.331074] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 53.332291] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 53.332608] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 53.332894] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 53.332935] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 53.333135] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 53.333360] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 53.333298] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 53.333578] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 53.333640] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 53.333821] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 53.334042] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 53.334008] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 53.334254] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 53.334459] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 53.334665] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 53.334890] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 53.335093] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 53.335330] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 53.336801] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 53.337093] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (493 ms remaining)
<7>[ 53.479070] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 53.831888] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 53.913799] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 53.914211] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 53.914596] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 53.950851] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 53.951306] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 53.951705] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 53.952166] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 54.057707] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.057707] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.057708] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.151809] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 54.153888] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 54.154175] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 54.158343] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 54.159662] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 54.160911] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 54.162155] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 54.163264] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 54.164609] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 54.164904] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 54.166612] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 54.166901] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 54.167636] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 54.168202] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 54.168554] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 54.168987] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 54.171644] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 54.171673] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 54.172070] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 54.185011] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 54.188263] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 54.188840] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 54.190421] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 54.193850] Console: switching to colour frame buffer device 180x56
<6>[ 54.209796] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 54.220859] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 54.221131] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 54.221206] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 54.221382] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 54.221783] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 54.222114] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 54.222414] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 54.222567] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 54.222625] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 54.222706] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 54.223007] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 54.223284] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 54.223551] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 54.223830] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 54.224094] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 54.224356] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 54.224613] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 54.224888] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 54.224871] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 54.225145] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 54.225399] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 54.225653] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 54.225924] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 54.225861] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 54.226179] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 54.226241] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.226435] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 54.226568] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 54.226691] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 54.226963] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 54.227805] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 54.227832] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.227841] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.227848] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 54.227859] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.227867] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 54.227892] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.227899] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 54.227913] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.227990] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 54.228280] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 54.228547] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 54.228911] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 54.229314] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 54.230273] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 54.230691] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 54.231204] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 54.231655] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 54.231996] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 54.234246] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.234263] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 54.234269] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 54.234401] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 54.234467] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 54.234504] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 54.234538] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 54.235090] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 54.235529] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 54.235924] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 54.236362] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.236849] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 54.236900] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 54.236933] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 54.237356] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.237792] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 54.237833] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 54.237862] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 54.238274] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 54.238651] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 54.238686] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 54.238704] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 54.238713] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 54.238720] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 54.239243] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 54.239561] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 54.239661] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[ 54.239671] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 54.239824] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 54.245482] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 54.246046] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 54.247307] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[ 54.256854] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<6>[ 54.257569] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 54.259057] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<7>[ 54.259685] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 54.286228] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 54.286589] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 54.286908] [IGT] xe_module_load: exiting, ret=0
<7>[ 54.312238] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 54.312396] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 54.312493] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 54.312586] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 54.312674] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 54.312773] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 54.312863] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 54.312949] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 54.313037] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 54.313125] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 54.313214] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 54.313299] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 54.313385] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 54.313470] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 54.313554] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 54.313637] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 54.313721] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 54.313816] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 54.313903] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 54.313991] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 54.314075] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 54.314158] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 54.314240] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 54.314323] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 54.314406] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 54.314488] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 54.314570] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 54.314653] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 54.314749] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 54.314845] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 54.314935] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 54.315020] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 54.315105] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 54.315187] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 54.315269] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 54.315350] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 54.320762] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 54.322684] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 54.323220] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 54.323814] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 54.344252] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 54.344406] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 54.344504] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 54.363931] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 54.364054] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 55.272054] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.272203] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.272355] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 55.369593] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 56.745220] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 56.745571] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067