<5>[ 0.000000] Linux version 6.14.0-rc6-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Mar 13 20:36:38 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fef5000 SMBIOS=0x6cbc7000 MEMATTR=0x68f39018 ESRT=0x68f71098 MOKvar=0x6cd0c000 TPMEventLog=0x6ff5a018
<6>[ 0.000000] efi: Remove mem252: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem254: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D86.2501240726 01/24/2025
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000008] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000018] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000374] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000375] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004647] esrt: Reserving ESRT space from 0x0000000068f71098 to 0x0000000068f711e8.
<7>[ 0.004655] e820: update [mem 0x68f71000-0x68f71fff] usable ==> reserved
<6>[ 0.004672] Using GB pages for direct mapping
<6>[ 0.005348] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005349] printk: early log buf free: 258888(98%)
<6>[ 0.005349] Secure boot disabled
<6>[ 0.005351] ACPI: Early table checksum verification disabled
<6>[ 0.005354] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005357] ACPI: XSDT 0x000000006FF71228 0001A4 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005361] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005363] ACPI: DSDT 0x000000006FFB6000 0254DE (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005365] ACPI: FACS 0x000000006FED9000 000040
<6>[ 0.005366] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005368] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005369] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005370] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005372] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005373] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005374] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005376] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005377] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005378] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005379] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005381] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005382] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005383] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005385] ACPI: SSDT 0x000000006FFDD000 009156 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005389] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005390] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005391] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005392] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005394] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005395] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005396] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005398] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005399] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005401] ACPI: SSDT 0x000000006FF85000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005403] ACPI: TPM2 0x000000006FF84000 00004C (v04 INTEL LNL 00000002 01000013)
<6>[ 0.005404] ACPI: LPIT 0x000000006FF83000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005405] ACPI: SSDT 0x000000006FF82000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005407] ACPI: SSDT 0x000000006FF81000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005408] ACPI: DBGP 0x000000006FF80000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005409] ACPI: DBG2 0x000000006FF7F000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005410] ACPI: NHLT 0x000000006FF7E000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005412] ACPI: SSDT 0x000000006FF7C000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005413] ACPI: SSDT 0x000000006FF75000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005414] ACPI: ECDT 0x000000006FF74000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005416] ACPI: DMAR 0x000000006FF73000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005417] ACPI: FPDT 0x000000006FF72000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005418] ACPI: SSDT 0x000000006FFA8000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005420] ACPI: SSDT 0x000000006FF6F000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005421] ACPI: SSDT 0x000000006FF6C000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005422] ACPI: SDEV 0x000000006FF6B000 000046 (v01 00000000 00000000)
<6>[ 0.005423] ACPI: SSDT 0x000000006FF60000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005425] ACPI: PHAT 0x000000006FF5F000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005426] ACPI: BGRT 0x000000006FF5E000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005427] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113]
<6>[ 0.005428] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb4dd]
<6>[ 0.005429] ACPI: Reserving FACS table memory at [mem 0x6fed9000-0x6fed903f]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005429] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005430] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005431] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005432] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f]
<6>[ 0.005432] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6155]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df]
<6>[ 0.005433] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e]
<6>[ 0.005434] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955]
<6>[ 0.005434] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037]
<6>[ 0.005434] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005435] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7]
<6>[ 0.005435] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2]
<6>[ 0.005435] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815]
<6>[ 0.005436] ACPI: Reserving SSDT table memory at [mem 0x6ff85000-0x6ff8560d]
<6>[ 0.005437] ACPI: Reserving TPM2 table memory at [mem 0x6ff84000-0x6ff8404b]
<6>[ 0.005437] ACPI: Reserving LPIT table memory at [mem 0x6ff83000-0x6ff830cb]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff82d5b]
<6>[ 0.005437] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff811ef]
<6>[ 0.005438] ACPI: Reserving DBGP table memory at [mem 0x6ff80000-0x6ff80033]
<6>[ 0.005438] ACPI: Reserving DBG2 table memory at [mem 0x6ff7f000-0x6ff7f053]
<6>[ 0.005438] ACPI: Reserving NHLT table memory at [mem 0x6ff7e000-0x6ff7e2e2]
<6>[ 0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ff7c000-0x6ff7d15b]
<6>[ 0.005439] ACPI: Reserving SSDT table memory at [mem 0x6ff75000-0x6ff7b53a]
<6>[ 0.005439] ACPI: Reserving ECDT table memory at [mem 0x6ff74000-0x6ff74068]
<6>[ 0.005439] ACPI: Reserving DMAR table memory at [mem 0x6ff73000-0x6ff730d7]
<6>[ 0.005440] ACPI: Reserving FPDT table memory at [mem 0x6ff72000-0x6ff72043]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ffa8000-0x6ffa886c]
<6>[ 0.005440] ACPI: Reserving SSDT table memory at [mem 0x6ff6f000-0x6ff703da]
<6>[ 0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff6c000-0x6ff6e462]
<6>[ 0.005441] ACPI: Reserving SDEV table memory at [mem 0x6ff6b000-0x6ff6b045]
<6>[ 0.005441] ACPI: Reserving SSDT table memory at [mem 0x6ff60000-0x6ff6a4f9]
<6>[ 0.005441] ACPI: Reserving PHAT table memory at [mem 0x6ff5f000-0x6ff5f7bf]
<6>[ 0.005442] ACPI: Reserving BGRT table memory at [mem 0x6ff5e000-0x6ff5e037]
<6>[ 0.005507] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005709] No NUMA configuration found
<6>[ 0.005709] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005714] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005826] Zone ranges:
<6>[ 0.005826] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005827] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005828] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005829] Device empty
<6>[ 0.005829] Movable zone start for each node
<6>[ 0.005830] Early memory node ranges
<6>[ 0.005830] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005831] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005832] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005832] node 0: [mem 0x0000000104500000-0x000000087f7fffff]
<6>[ 0.005833] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005838] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005855] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007904] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036404] On node 0, zone Normal: 17664 pages in unavailable ranges
<6>[ 0.036470] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036953] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.036959] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037010] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037011] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037013] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037015] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037016] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037027] e820: update [mem 0x68f52000-0x68f6cfff] usable ==> reserved
<6>[ 0.037033] TSC deadline timer available
<6>[ 0.037035] CPU topo: Max. logical packages: 1
<6>[ 0.037036] CPU topo: Max. logical dies: 1
<6>[ 0.037036] CPU topo: Max. dies per package: 1
<6>[ 0.037037] CPU topo: Max. threads per core: 1
<6>[ 0.037038] CPU topo: Num. cores per package: 8
<6>[ 0.037038] CPU topo: Num. threads per package: 8
<6>[ 0.037038] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037051] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037052] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037053] PM: hibernation: Registered nosave memory: [mem 0x68f52000-0x68f6cfff]
<6>[ 0.037053] PM: hibernation: Registered nosave memory: [mem 0x68f71000-0x68f71fff]
<6>[ 0.037054] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037054] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037055] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037055] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037056] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037056] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037056] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037056] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1044fffff]
<6>[ 0.037058] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037059] Booting paravirtualized kernel on bare hardware
<6>[ 0.037061] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037069] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037394] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037398] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037400] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037412] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[ 0.037490] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037503] random: crng init done
<6>[ 0.039347] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040267] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040321] Fallback order for Node 0: 0
<6>[ 0.040324] Built 1 zonelists, mobility grouping on. Total pages: 8289632
<6>[ 0.040325] Policy zone: Normal
<6>[ 0.040335] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[ 0.040336] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040337] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041255] software IO TLB: area num 8.
<4>[ 0.086978] **********************************************************
<4>[ 0.086979] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086980] ** **
<4>[ 0.086980] ** This system shows unhashed kernel memory addresses **
<4>[ 0.086980] ** via the console, logs, and other interfaces. This **
<4>[ 0.086980] ** might reduce the security of your system. **
<4>[ 0.086981] ** **
<4>[ 0.086981] ** If you see this message and you are not debugging **
<4>[ 0.086981] ** the kernel, report this immediately to your system **
<4>[ 0.086981] ** administrator! **
<4>[ 0.086982] ** **
<4>[ 0.086982] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.086982] **********************************************************
<6>[ 0.088058] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088383] ftrace: allocating 59560 entries in 233 pages
<6>[ 0.113770] ftrace: allocated 233 pages with 5 groups
<6>[ 0.114995] Dynamic Preempt: voluntary
<6>[ 0.115437] Running RCU self tests
<6>[ 0.115438] Running RCU synchronous self tests
<6>[ 0.115439] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115439] rcu: RCU lockdep checking is enabled.
<6>[ 0.115439] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115440] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115440] Rude variant of Tasks RCU enabled.
<6>[ 0.115440] Tracing variant of Tasks RCU enabled.
<6>[ 0.115441] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115441] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115479] Running RCU synchronous self tests
<6>[ 0.115483] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115486] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115488] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125602] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.126054] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126389] Console: colour dummy device 80x25
<6>[ 0.126398] printk: legacy console [tty0] enabled
<6>[ 0.127601] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127609] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127612] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127616] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127619] ... CLASSHASH_SIZE: 4096
<6>[ 0.127623] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127627] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127631] ... CHAINHASH_SIZE: 262144
<6>[ 0.127634] memory used by lock dependency info: 54145 kB
<6>[ 0.127639] memory used for stack traces: 4224 kB
<6>[ 0.127643] per task-struct memory footprint: 1920 bytes
<6>[ 0.127694] ACPI: Core revision 20240827
<6>[ 0.128569] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128633] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128639] DMAR: Host address width 38
<6>[ 0.128644] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128681] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128719] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128742] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128771] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128796] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128832] DMAR: SATC flags: 0x1
<6>[ 0.128842] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128848] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128853] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130912] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135941] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135959] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.136034] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.136041] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.136221] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.136226] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.136235] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.136243] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.136247] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136255] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136261] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136277] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136283] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136287] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136292] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136298] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136304] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136309] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136314] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136319] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136953] Freeing SMP alternatives memory: 48K
<6>[ 0.136953] pid_max: default: 32768 minimum: 301
<6>[ 0.136953] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136953] landlock: Up and running.
<6>[ 0.136953] Yama: becoming mindful.
<6>[ 0.136953] AppArmor: AppArmor initialized
<6>[ 0.136953] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136953] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136953] Running RCU synchronous self tests
<6>[ 0.136953] Running RCU synchronous self tests
<6>[ 0.136953] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136953] Running RCU Tasks wait API self tests
<6>[ 0.136953] Running RCU Tasks Rude wait API self tests
<6>[ 0.136953] Running RCU Tasks Trace wait API self tests
<6>[ 0.136953] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136961] core: cpu_core PMU driver:
<6>[ 0.136970] ... version: 6
<6>[ 0.136975] ... bit width: 48
<6>[ 0.136978] ... generic registers: 10
<6>[ 0.136982] ... value mask: 0000ffffffffffff
<6>[ 0.136986] ... max period: 00007fffffffffff
<6>[ 0.136990] ... fixed-purpose events: 4
<6>[ 0.136994] ... event mask: 0001000f000003ff
<6>[ 0.137023] signal: max sigframe size: 3632
<6>[ 0.137045] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.137128] rcu: Hierarchical SRCU implementation.
<6>[ 0.137132] rcu: Max phase no-delay instances is 400.
<6>[ 0.137267] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139051] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.139306] smp: Bringing up secondary CPUs ...
<6>[ 0.139647] smpboot: x86: Booting SMP configuration:
<6>[ 0.139653] .... node #0, CPUs: #1 #2 #3
<6>[ 0.143163] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.147468] #4 #5 #6 #7
<6>[ 0.010717] core: cpu_atom PMU driver:
<6>[ 0.010717] ... version: 6
<6>[ 0.010717] ... bit width: 48
<6>[ 0.010717] ... generic registers: 8
<6>[ 0.010717] ... value mask: 0000ffffffffffff
<6>[ 0.010717] ... max period: 00007fffffffffff
<6>[ 0.010717] ... fixed-purpose events: 6
<6>[ 0.010717] ... event mask: 00000077000000ff
<6>[ 0.159077] smp: Brought up 1 node, 8 CPUs
<6>[ 0.159077] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.161066] Memory: 32360156K/33158528K available (24294K kernel code, 5580K rwdata, 9276K rodata, 5624K init, 68408K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.161979] devtmpfs: initialized
<6>[ 0.162204] x86/mm: Memory block size: 128MB
<6>[ 0.177530] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.178342] Running RCU synchronous self tests
<6>[ 0.178354] Running RCU synchronous self tests
<6>[ 0.178371] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.178371] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.178371] pinctrl core: initialized pinctrl subsystem
<6>[ 0.179316] PM: RTC time: 11:52:07, date: 2025-03-14
<6>[ 0.180148] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.181099] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.181402] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.181694] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.181757] audit: initializing netlink subsys (disabled)
<5>[ 0.182022] audit: type=2000 audit(1741953127.046:1): state=initialized audit_enabled=0 res=1
<6>[ 0.182708] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.182710] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.182716] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.182720] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.182725] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.182767] EISA bus registered
<6>[ 0.182958] cpuidle: using governor ladder
<6>[ 0.182986] cpuidle: using governor menu
<6>[ 0.183055] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.183425] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.183451] PCI: Using configuration type 1 for base access
<6>[ 0.183968] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.185217] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.185217] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.185217] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.185217] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.204957] raid6: avx2x4 gen() 77979 MB/s
<6>[ 0.221955] raid6: avx2x2 gen() 82558 MB/s
<6>[ 0.238954] raid6: avx2x1 gen() 76294 MB/s
<6>[ 0.238958] raid6: using algorithm avx2x2 gen() 82558 MB/s
<6>[ 0.255955] raid6: .... xor() 57328 MB/s, rmw enabled
<6>[ 0.255959] raid6: using avx2x2 recovery algorithm
<6>[ 0.259134] fbcon: Taking over console
<6>[ 0.260344] ACPI: Added _OSI(Module Device)
<6>[ 0.260396] ACPI: Added _OSI(Processor Device)
<6>[ 0.260439] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.260483] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.788712] ACPI: 32 ACPI AML tables successfully acquired and loaded
<6>[ 0.810929] ACPI: EC: EC started
<6>[ 0.810956] ACPI: EC: interrupt blocked
<6>[ 0.814779] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.814788] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 0.896140] Callback from call_rcu_tasks() invoked.
<6>[ 1.122880] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.122890] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.151772] ACPI: Interpreter enabled
<6>[ 1.151875] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.151880] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.160668] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.160692] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.216174] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.216259] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.292412] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.292693] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.295729] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.601963] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 1.614507] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 1.752535] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 1.754109] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 1.762381] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 1.771895] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 1.772135] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 1.772371] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 1.826293] ACPI: \: Can't tag data node
<3>[ 1.827436] ACPI: \: Can't tag data node
<3>[ 1.828566] ACPI: \: Can't tag data node
<3>[ 1.829604] ACPI: \: Can't tag data node
<3>[ 1.830728] ACPI: \: Can't tag data node
<6>[ 1.972310] ACPI: \_TZ_.FN00: New power resource
<6>[ 1.973747] ACPI: \_TZ_.FN01: New power resource
<6>[ 1.975147] ACPI: \_TZ_.FN02: New power resource
<6>[ 1.976540] ACPI: \_TZ_.FN03: New power resource
<6>[ 1.977915] ACPI: \_TZ_.FN04: New power resource
<6>[ 1.981821] ACPI: \PIN_: New power resource
<6>[ 1.992088] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 1.992130] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.001480] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.026311] PCI host bridge to bus 0000:00
<6>[ 2.026400] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.026423] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.026444] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.026466] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.026488] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.026513] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.035081] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.036420] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.036557] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.036578] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.036601] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.036689] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.042990] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.043072] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 2.046675] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.046749] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.046771] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 2.049068] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.049153] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.049178] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.049215] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.049452] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.049548] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.060939] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.061096] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.061122] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.061159] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.061469] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.061551] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.073740] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.073825] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.073850] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.073887] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.074108] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.074187] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.086263] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.086350] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 2.086385] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.086869] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.086939] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.086959] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 2.088006] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.088109] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 2.088250] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.092846] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.092953] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 2.093048] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 2.093534] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.093546] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.096941] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.097108] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 2.097128] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 2.097295] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.097306] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.100789] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.100897] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 2.101098] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.108380] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.108552] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 2.108747] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.110151] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.110257] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 2.110395] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.115664] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.115780] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 2.115802] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 2.116467] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.116744] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.120830] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.121197] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.125065] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.125344] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.129371] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.129650] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.133559] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.133734] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 2.133922] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.141243] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.141319] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.141338] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.141360] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.141599] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.141687] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.153965] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.153965] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.153965] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.154964] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.154964] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.168694] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.172670] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.172905] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 2.172942] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 2.173246] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.174610] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.174793] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 2.174822] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.177952] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.178221] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.178720] pci 0000:00:1f.6: [8086:550f] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.178888] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.179077] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.182978] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.183353] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.183720] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.184126] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.184247] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.184269] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.184290] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.184565] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.184576] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.185805] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.188097] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.188755] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.188873] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.192190] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.192333] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.692556] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 12.696420] Low-power S0 idle used by default for system suspend
<6>[ 12.748543] ACPI: EC: interrupt unblocked
<6>[ 12.748554] ACPI: EC: event unblocked
<6>[ 12.748589] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 12.748595] ACPI: EC: GPE=0x6e
<6>[ 12.748601] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 12.748610] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 12.749090] iommu: Default domain type: Translated
<6>[ 12.749090] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 12.750824] SCSI subsystem initialized
<7>[ 12.751089] libata version 3.00 loaded.
<6>[ 12.752189] ACPI: bus type USB registered
<6>[ 12.752904] usbcore: registered new interface driver usbfs
<6>[ 12.753248] usbcore: registered new interface driver hub
<6>[ 12.753662] usbcore: registered new device driver usb
<6>[ 12.754176] pps_core: LinuxPPS API ver. 1 registered
<6>[ 12.754189] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 12.754242] PTP clock support registered
<6>[ 12.755397] EDAC MC: Ver: 3.0.0
<6>[ 12.758015] efivars: Registered efivars operations
<6>[ 12.761109] NetLabel: Initializing
<6>[ 12.761120] NetLabel: domain hash size = 128
<6>[ 12.761130] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 12.761289] NetLabel: unlabeled traffic allowed by default
<6>[ 12.761324] mctp: management component transport protocol core
<6>[ 12.761337] NET: Registered PF_MCTP protocol family
<6>[ 12.761418] PCI: Using ACPI for IRQ routing
<7>[ 12.824391] PCI: pci_cache_line_size set to 64 bytes
<6>[ 12.824807] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 12.825006] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 12.825026] e820: reserve RAM buffer [mem 0x68f52000-0x6bffffff]
<7>[ 12.825033] e820: reserve RAM buffer [mem 0x68f71000-0x6bffffff]
<7>[ 12.825039] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 12.825046] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 12.826028] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 12.826059] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 12.826074] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 12.826121] vgaarb: loaded
<6>[ 12.828390] clocksource: Switched to clocksource tsc-early
<5>[ 12.840856] VFS: Disk quotas dquot_6.6.0
<6>[ 12.840891] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 12.842168] AppArmor: AppArmor Filesystem Enabled
<6>[ 12.842385] pnp: PnP ACPI init
<6>[ 12.843423] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 12.843436] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 12.844768] system 00:02: [io 0x06a4] has been reserved
<6>[ 12.844777] system 00:02: [io 0x06a0] has been reserved
<6>[ 12.863162] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 12.863173] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 12.863185] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 12.863193] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 12.863202] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 12.863212] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 12.863221] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 12.863229] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 12.866040] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 12.868342] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 12.868489] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 12.873817] pnp: PnP ACPI: found 8 devices
<6>[ 12.907708] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 12.908364] NET: Registered PF_INET protocol family
<6>[ 12.908692] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.914481] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 12.914983] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 12.915385] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.916789] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 12.919945] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 12.920692] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.922394] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.924168] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 12.924310] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 12.924339] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 12.924362] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 12.924466] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 12.924484] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 12.924500] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 12.924517] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 12.924669] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 12.924794] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 12.924882] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 12.924971] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 12.925044] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 12.925065] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 12.925087] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 12.925107] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.925135] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 12.925150] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 12.925172] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 12.925192] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.925223] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 12.925238] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 12.925258] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 12.925278] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.925308] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 12.925322] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 12.925342] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 12.925371] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 12.925417] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 12.925480] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 12.925495] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 12.925509] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 12.925525] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 12.925541] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 12.925558] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 12.925572] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 12.925587] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.925605] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 12.925618] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 12.925632] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.925649] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 12.925664] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 12.925678] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.925696] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 12.925708] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 12.925732] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 12.928117] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 12.931556] PCI: CLS 0 bytes, default 64
<6>[ 12.931766] DMAR: No RMRR found
<6>[ 12.931793] DMAR: No ATSR found
<6>[ 12.931803] DMAR: dmar1: Using Queued invalidation
<6>[ 12.931884] DMAR: dmar0: Using Queued invalidation
<6>[ 12.931906] DMAR: dmar2: Using Queued invalidation
<6>[ 12.933914] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 12.934094] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 12.934249] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 12.934384] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 12.943439] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 12.948216] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 12.948376] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 12.948533] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 12.948674] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 12.948885] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 12.948987] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 12.949086] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 12.949243] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 12.949400] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 12.949580] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 12.949685] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 12.949930] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 12.950038] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 12.950149] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 12.950253] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 12.950411] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 12.950542] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 12.950701] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 12.950955] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 12.951063] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 12.951181] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 12.951294] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 12.951403] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 12.951544] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 12.951706] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 12.973664] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 12.973752] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 12.973807] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 12.980226] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 12.980422] clocksource: Switched to clocksource tsc
<6>[ 12.981168] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 12.986432] Initialise system trusted keyrings
<5>[ 12.986511] Key type blacklist registered
<6>[ 12.987128] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 13.004978] zbud: loaded
<6>[ 13.007294] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 13.007477] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 13.007489] ntfs3: Read-only LZX/Xpress compression included
<5>[ 13.008139] integrity: Platform Keyring initialized
<5>[ 13.008182] integrity: Machine keyring initialized
<6>[ 13.019716] xor: automatically using best checksumming function avx
<5>[ 13.019739] Key type asymmetric registered
<5>[ 13.019759] Asymmetric key parser 'x509' registered
<6>[ 13.019953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 13.021085] io scheduler mq-deadline registered
<6>[ 13.025129] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 13.026668] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 13.027323] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 13.029709] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 13.030574] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 13.031673] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 13.032372] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 13.034468] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 13.035252] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 13.037024] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 13.037880] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 13.039328] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 13.044589] Monitor-Mwait will be used to enter C-1 state
<7>[ 13.044676] Monitor-Mwait will be used to enter C-2 state
<7>[ 13.044688] Monitor-Mwait will be used to enter C-3 state
<6>[ 13.051519] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 13.051961] ACPI: button: Lid Switch [LID0]
<6>[ 13.052416] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 13.052696] ACPI: button: Sleep Button [SLPB]
<6>[ 13.053118] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 13.053677] ACPI: button: Power Button [PWRB]
<6>[ 13.203691] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 13.203714] ACPI: thermal: Thermal Zone [TZ00] (52 C)
<6>[ 13.206105] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 13.208112] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 13.210313] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 13.231215] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 13.268068] serial 0000:00:12.0: enabling device (0000 -> 0002)
<4>[ 13.273229] hpet_acpi_add: no address or irqs in _CRS
<6>[ 13.273422] Linux agpgart interface v0.103
<6>[ 13.306664] ACPI: bus type drm_connector registered
<6>[ 13.348116] loop: module loaded
<6>[ 13.421786] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.527829] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.658847] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 13.782880] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 13.897121] Key type psk registered
<6>[ 13.899239] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 13.899886] nvme nvme0: pci function 0000:80:00.0
<6>[ 13.901938] tun: Universal TUN/TAP device driver, 1.6
<6>[ 13.904650] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.904936] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 13.907596] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.911151] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.911191] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 13.911223] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.911846] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.911883] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.911902] usb usb1: Product: xHCI Host Controller
<6>[ 13.911915] usb usb1: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.911930] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 13.913439] hub 1-0:1.0: USB hub found
<6>[ 13.913583] hub 1-0:1.0: 1 port detected
<6>[ 13.919960] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.919987] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.920005] usb usb2: Product: xHCI Host Controller
<6>[ 13.920019] usb usb2: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.920034] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 13.921240] hub 2-0:1.0: USB hub found
<6>[ 13.921309] hub 2-0:1.0: 3 ports detected
<6>[ 13.936931] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 13.946145] nvme0n1: p1 p2
<6>[ 13.953961] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.954001] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 13.956747] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.958474] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.958499] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 13.958522] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.958804] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.958820] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.958830] usb usb3: Product: xHCI Host Controller
<6>[ 13.958837] usb usb3: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.958846] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 13.959539] hub 3-0:1.0: USB hub found
<6>[ 13.959591] hub 3-0:1.0: 8 ports detected
<6>[ 13.988624] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.988647] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.988657] usb usb4: Product: xHCI Host Controller
<6>[ 13.988665] usb usb4: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.988673] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 13.989340] hub 4-0:1.0: USB hub found
<6>[ 13.989392] hub 4-0:1.0: 2 ports detected
<6>[ 13.996656] usbcore: registered new interface driver usb-storage
<6>[ 13.996838] usbcore: registered new interface driver usbserial_generic
<6>[ 13.996981] usbserial: USB Serial support registered for generic
<6>[ 13.997040] usbcore: registered new interface driver ftdi_sio
<6>[ 13.997076] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 13.997130] usbcore: registered new interface driver pl2303
<6>[ 13.997171] usbserial: USB Serial support registered for pl2303
<6>[ 13.997309] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 13.997320] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 14.709169] i8042: Can't read CTR while initializing i8042
<3>[ 14.709180] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 14.710176] mousedev: PS/2 mouse device common for all mice
<6>[ 14.711123] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 14.712806] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 14.713024] rtc_cmos rtc_cmos: setting system clock to 2025-03-14T11:52:22 UTC (1741953142)
<6>[ 14.713185] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 14.713237] i2c_dev: i2c /dev entries driver
<6>[ 14.716327] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 14.716344] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 14.716354] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 14.716393] device-mapper: uevent: version 1.0.3
<6>[ 14.716682] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 14.716806] platform eisa.0: Probing EISA bus 0
<4>[ 14.716817] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 14.716831] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 14.716844] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 14.716855] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 14.716866] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 14.716878] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 14.716889] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 14.716900] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 14.716911] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 14.716921] platform eisa.0: EISA: Detected 0 cards
<6>[ 14.716930] intel_pstate: Intel P-state driver initializing
<6>[ 14.720419] Hybrid CPU capacity scaling enabled
<6>[ 14.721838] intel_pstate: HWP enabled
<6>[ 14.721846] sdhci: Secure Digital Host Controller Interface driver
<6>[ 14.721854] sdhci: Copyright(c) Pierre Ossman
<6>[ 14.722003] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 14.724203] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 14.724970] drop_monitor: Initializing network drop monitor service
<6>[ 14.725169] NET: Registered PF_INET6 protocol family
<6>[ 14.734344] Segment Routing with IPv6
<6>[ 14.734393] In-situ OAM (IOAM) with IPv6
<6>[ 14.734438] NET: Registered PF_PACKET protocol family
<5>[ 14.734559] Key type dns_resolver registered
<4>[ 14.745323] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 14.745962] microcode: Current revision: 0x0000011c
<6>[ 14.746595] IPI shorthand broadcast: enabled
<6>[ 14.755866] sched_clock: Marking stable (14746001603, 9717267)->(14835244097, -79525227)
<6>[ 14.756675] registered taskstats version 1
<5>[ 14.758039] Loading compiled-in X.509 certificates
<6>[ 14.786717] Demotion targets for Node 0: null
<6>[ 14.787077] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 14.787139] kmemleak: Automatic memory scanning thread started
<5>[ 14.787296] Key type .fscrypt registered
<5>[ 14.787301] Key type fscrypt-provisioning registered
<6>[ 14.789899] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 14.790032] Key type trusted registered
<5>[ 14.792188] Key type encrypted registered
<6>[ 14.792199] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 14.792300] Loading compiled-in module X.509 certificates
<5>[ 14.792928] Loaded X.509 cert 'Build time autogenerated kernel key: 92d3685cd497c839ab566243307548c87338c73e'
<6>[ 14.792943] ima: Allocated hash algorithm: sha256
<6>[ 14.810844] ima: No architecture policies found
<6>[ 14.811106] evm: Initialising EVM extended attributes:
<6>[ 14.811118] evm: security.selinux
<6>[ 14.811127] evm: security.SMACK64
<6>[ 14.811136] evm: security.SMACK64EXEC
<6>[ 14.811144] evm: security.SMACK64TRANSMUTE
<6>[ 14.811154] evm: security.SMACK64MMAP
<6>[ 14.811162] evm: security.apparmor
<6>[ 14.811170] evm: security.ima
<6>[ 14.811178] evm: security.capability
<6>[ 14.811186] evm: HMAC attrs: 0x1
<6>[ 14.816428] PM: Magic number: 1:538:883
<6>[ 14.816859] printk: legacy console [netcon0] enabled
<6>[ 14.816877] netconsole: network logging started
<6>[ 14.818303] RAS: Correctable Errors collector initialized.
<6>[ 14.818645] clk: Disabling unused clocks
<6>[ 14.818672] PM: genpd: Disabling unused power domains
<6>[ 14.820565] md: Waiting for all devices to be available before autodetect
<6>[ 14.820582] md: If you don't use raid, use raid=noautodetect
<6>[ 14.820595] md: Autodetecting RAID arrays.
<6>[ 14.820615] md: autorun ...
<6>[ 14.820624] md: ... autorun DONE.
<6>[ 14.876144] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none.
<6>[ 14.876214] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 14.876778] devtmpfs: mounted
<6>[ 14.887915] Freeing unused decrypted memory: 2028K
<6>[ 14.888876] Freeing unused kernel image (initmem) memory: 5624K
<6>[ 14.889036] Write protecting the kernel read-only data: 34816k
<6>[ 14.889476] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[ 14.889738] Freeing unused kernel image (rodata/data gap) memory: 964K
<6>[ 14.894676] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 14.894704] Run /sbin/init as init process
<7>[ 14.894709] with arguments:
<7>[ 14.894710] /sbin/init
<7>[ 14.894711] with environment:
<7>[ 14.894711] HOME=/
<7>[ 14.894712] TERM=linux
<7>[ 14.894713] BOOT_IMAGE=/boot/drm_intel
<7>[ 14.941890] systemd[1]: Inserted module 'autofs4'
<7>[ 14.961932] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 14.962007] systemd[1]: Detected architecture x86-64.
<7>[ 14.964357] systemd[1]: Hostname set to <shard-lnl-5>.
<7>[ 15.213941] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.268434] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.273240] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.276064] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.276485] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.277503] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 15.277673] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC...
<7>[ 15.277803] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.277923] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.278022] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.278119] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.278218] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.278564] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.279045] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.279374] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.279741] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.280020] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.280226] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.280513] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.280822] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.281101] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.281264] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.281520] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.281836] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 15.285074] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 15.287511] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 15.290093] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 15.292793] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 15.298049] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 15.301824] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 15.304903] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 15.309153] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 15.312919] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 15.315635] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 15.318343] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 15.321855] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 15.325475] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 15.330959] systemd-journald[214]: Collecting audit messages is disabled.
<7>[ 15.331622] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<7>[ 15.336825] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 15.338797] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<7>[ 15.344035] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<6>[ 15.344097] pstore: Using crash dump compression: deflate
<6>[ 15.345382] pstore: Registered efi_pstore as persistent store backend
<7>[ 15.349529] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 15.349699] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.349781] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.353368] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<6>[ 15.355166] fuse: init (API version 7.42)
<7>[ 15.359976] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.524391] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. Quota mode: none.
<6>[ 15.556959] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:411435008k SS
<7>[ 15.573072] systemd-journald[214]: Received client request to flush runtime journal.
<7>[ 15.592103] systemd-journald[214]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 15.592123] systemd-journald[214]: Rotating system journal.
<4>[ 16.245265] nvme nvme0: using unchecked data buffer
<4>[ 16.357785] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.357811] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.357835] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.357859] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.357884] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.357909] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.357933] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.357958] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.357982] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358007] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358032] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358056] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358081] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358105] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358130] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358155] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358179] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358216] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358240] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358264] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358289] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358314] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358338] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358363] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358387] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358416] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358436] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358492] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358512] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358537] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358562] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358586] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358621] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358645] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358670] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358694] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358765] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.358783] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.391636] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.391660] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.391684] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.391709] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.391739] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.391758] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.391795] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.391819] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392031] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392062] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392078] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392106] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392167] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392179] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392192] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392208] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392244] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392269] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392293] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392318] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392343] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392367] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392392] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392416] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392441] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392466] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392490] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392515] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392539] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.392564] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.399892] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<6>[ 16.406094] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 16.415537] intel-hid INTC107B:00: platform supports 5 button array
<6>[ 16.415843] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<4>[ 16.416445] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416464] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416484] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416504] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416524] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416544] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416564] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416680] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416700] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416725] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416746] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416765] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416785] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416805] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416825] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416845] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416865] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416885] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416953] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416973] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.416993] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417013] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417094] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417106] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417119] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417157] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417170] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417182] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417195] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417219] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417232] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417244] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417257] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417269] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417282] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417294] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417307] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417319] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.417332] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.458655] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.458680] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.465381] pci 0000:00:05.0: Setting to D3hot
<6>[ 16.476766] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.488801] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.488993] intel_pmc_core INT33A1:00: initialized
<4>[ 16.512714] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512741] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512761] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512780] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512800] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512820] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512840] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512860] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512880] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512936] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.512956] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513024] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513045] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513078] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513098] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513118] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513138] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513184] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513216] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513236] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513256] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513288] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513308] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513328] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513348] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513391] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513435] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513455] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513475] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513508] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513529] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513549] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513569] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513589] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513609] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513628] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513648] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513668] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513688] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513708] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513736] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513754] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513774] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513794] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.513814] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 16.572745] audit: type=1400 audit(1741953144.357:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=437 comm="apparmor_parser"
<5>[ 16.572971] audit: type=1400 audit(1741953144.358:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=435 comm="apparmor_parser"
<5>[ 16.573548] audit: type=1400 audit(1741953144.358:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=429 comm="apparmor_parser"
<5>[ 16.574505] audit: type=1400 audit(1741953144.359:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=433 comm="apparmor_parser"
<5>[ 16.578537] audit: type=1400 audit(1741953144.363:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=436 comm="apparmor_parser"
<5>[ 16.580091] audit: type=1400 audit(1741953144.365:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=432 comm="apparmor_parser"
<5>[ 16.587764] audit: type=1400 audit(1741953144.372:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=434 comm="apparmor_parser"
<5>[ 16.592196] audit: type=1400 audit(1741953144.377:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=430 comm="apparmor_parser"
<5>[ 16.604594] audit: type=1400 audit(1741953144.389:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=444 comm="apparmor_parser"
<5>[ 16.605729] audit: type=1400 audit(1741953144.390:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-run" pid=445 comm="apparmor_parser"
<3>[ 16.609409] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 16.650443] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 16.936045] ACPI: bus type thunderbolt registered
<6>[ 16.942544] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 16.949145] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 16.949943] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 16.962351] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 16.971518] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 16.977007] intel_rapl_common: Found RAPL domain package
<6>[ 16.977015] intel_rapl_common: Found RAPL domain dram
<6>[ 16.981490] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 16.984779] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 16.984788] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 17.001343] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 17.001351] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 17.004944] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 17.010431] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 17.015338] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 17.016799] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 17.089009] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 17.154600] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 17.154608] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 17.154609] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 17.154610] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 17.154612] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 17.154613] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 17.161467] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 179
<6>[ 17.161473] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 17.161925] cryptd: max_cpu_qlen set to 1000
<6>[ 17.207732] AES CTR mode by8 optimization enabled
<4>[ 17.228591] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.335057] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 17.451987] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.512589] evm: overlay not supported
<6>[ 17.630435] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 17.631346] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:90
<6>[ 17.631350] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 17.631488] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 17.655690] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 17.655696] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 17.655697] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 17.781814] loop0: detected capacity change from 0 to 8
<6>[ 17.986331] intel_rapl_common: Found RAPL domain package
<6>[ 17.986337] intel_rapl_common: Found RAPL domain core
<6>[ 17.986339] intel_rapl_common: Found RAPL domain uncore
<6>[ 17.986341] intel_rapl_common: Found RAPL domain dram
<6>[ 17.986343] intel_rapl_common: Found RAPL domain psys
<6>[ 18.178832] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<6>[ 18.221277] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<4>[ 18.234211] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 18.281222] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 18.281237] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 18.403195] Consider using thermal netlink events interface
<6>[ 18.548872] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 18.674546] hid: raw HID events driver (C) Jiri Kosina
<6>[ 18.681121] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 18.710236] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 18.720513] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.722649] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.725436] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.727422] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.729241] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.729834] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.736531] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.740377] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.744515] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.747318] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.750488] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.752932] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.615877] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 19.615913] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 20.600343] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 20.600455] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 22.283023] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<4>[ 29.294057] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<7>[ 36.280933] systemd-journald[214]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 74.655173] [IGT] xe_module_load: executing
<7>[ 74.660566] [IGT] xe_module_load: starting subtest load
<5>[ 74.849823] Setting dangerous option force_probe - tainting kernel
<6>[ 74.852746] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 74.854485] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 74.854495] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 74.854607] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 74.854707] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 74.859246] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 74.863429] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 74.863524] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 74.863591] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 74.863654] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 74.863713] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 74.863803] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 74.863878] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 74.863950] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 74.864020] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 74.864078] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 74.864134] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 74.864184] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 74.864234] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 74.864283] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 74.864331] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 74.864424] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 74.865600] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 74.874778] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 74.875683] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 74.875756] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 74.875844] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 74.875912] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 74.875975] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 74.876037] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 74.876097] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 74.876833] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 74.881088] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 74.881176] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 74.881233] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 74.881287] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 74.881337] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 74.881387] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 74.881436] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 74.881484] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 74.881531] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 74.881578] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 74.881623] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 74.881668] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 74.881713] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 74.881785] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 74.883200] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 74.885536] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1345
<6>[ 74.886596] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 74.886701] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 74.886830] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 74.888312] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 74.888559] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 74.907849] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 74.908147] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 74.908219] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 74.908285] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 74.908345] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 74.908402] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 74.908459] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 74.908514] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 74.908929] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 74.909092] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 74.909220] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6feec018
<7>[ 74.909334] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 74.909414] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 74.909493] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 74.909569] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 74.909645] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 74.909742] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 74.909856] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 74.909984] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 74.910089] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 74.910178] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 74.910270] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 74.910359] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 74.910446] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 74.910527] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 74.910607] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 74.910685] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 74.910796] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 74.910899] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 74.911000] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 74.911099] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 74.911179] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 74.911255] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 74.911331] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 74.911406] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 74.911481] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 74.911556] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 74.911630] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 74.911703] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 74.911800] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 74.911899] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 74.911997] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 74.912091] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 74.912172] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 74.912241] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 74.912309] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 74.912376] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 74.912442] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 74.912513] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 74.913207] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 74.913290] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 74.913374] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 74.913462] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 74.913541] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 74.913606] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 74.913676] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 74.913755] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 74.913844] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 74.913946] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 74.914048] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 74.914150] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 74.914233] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 74.914300] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 74.914371] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 74.914431] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 74.914491] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 74.914550] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 74.914609] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 74.914675] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 74.914746] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 74.914830] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 74.914916] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 74.914997] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 74.915077] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 74.915146] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 74.915205] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 74.915268] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 74.915364] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 74.915501] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 74.915614] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 74.915953] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 74.916138] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 74.916289] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 74.916380] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 74.916475] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 74.916604] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 74.916692] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 74.916718] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 74.916855] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 74.916967] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 74.917075] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 74.917409] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 74.917564] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 74.918192] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 74.918296] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 74.918384] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 74.918464] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 74.918540] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 74.918614] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 74.918687] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 74.918773] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 74.920459] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 74.920568] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 74.920665] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 74.920772] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 74.920888] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 74.920997] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 74.921110] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 74.921197] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 74.921282] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 74.921366] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 74.921463] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 74.921561] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 74.921657] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 74.921758] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 74.921860] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 74.921954] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 74.922047] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 74.922136] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 74.922223] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 74.922311] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 74.922395] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 74.922470] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 74.922552] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 74.922626] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 74.922705] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 74.922807] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 74.922902] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 74.922996] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 74.923087] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 74.923178] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 74.924584] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 74.927217] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 74.927348] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 74.927471] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 74.927674] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 74.927885] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 74.928078] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 74.928215] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 74.928346] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 74.928466] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 74.928594] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 74.928727] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 74.928843] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 74.928952] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 74.929061] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 74.929192] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 74.929430] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 74.929553] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 74.929661] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 74.929774] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 74.929876] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 74.930129] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 74.930412] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 74.931806] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 74.932138] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<6>[ 74.934316] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 74.934936] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 74.935564] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 74.936447] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 74.937818] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 74.938342] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 74.940470] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 74.949763] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 74.949773] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 74.949775] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 74.949776] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 74.949779] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 74.949780] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 74.949785] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 74.949786] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 74.949789] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 74.949826] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 74.949828] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 74.949829] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 74.949838] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 74.950427] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 74.950960] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 74.951083] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 74.951230] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 74.951360] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 74.951527] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 74.951643] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 74.951762] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 74.951870] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 74.951975] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 74.952107] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 74.952335] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 74.952515] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 74.952642] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 74.953021] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 74.953171] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 74.953307] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 74.953528] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 74.953645] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 74.953760] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 74.954234] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 74.954354] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 74.954476] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 74.954564] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 74.954649] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 74.954739] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 74.954836] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 74.954931] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 74.955026] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 74.955109] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 74.955185] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 74.955261] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 74.955336] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 74.955410] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 74.955476] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 74.955544] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 74.955612] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 74.955684] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 74.955769] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 74.955855] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 74.955947] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 74.956734] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 74.956847] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 74.956931] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 74.957021] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 74.957106] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 74.957179] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 74.957249] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 74.957323] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 74.957402] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 74.957468] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 74.957531] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 74.957594] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 74.957664] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 74.957749] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 74.957841] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 74.957928] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 74.958015] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 74.958111] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 74.958191] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 74.958267] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 74.958351] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 74.958512] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 74.958590] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 74.958658] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 74.958728] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 74.958801] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 74.958879] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 74.958958] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 74.959036] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 74.959112] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 74.959197] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 74.959279] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 74.959360] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 74.959439] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 74.959502] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 74.959562] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 74.959623] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 74.959682] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 74.959754] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 74.959982] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 74.960075] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 74.960153] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 74.960231] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 74.960321] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7>[ 74.960412] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7>[ 74.960535] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 74.960629] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 74.960831] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 74.960964] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 74.961085] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 74.961185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 74.961286] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 74.961385] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 74.961482] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 74.961563] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 74.961638] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 74.961711] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 74.961809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 74.961899] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 74.961988] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 74.962076] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 74.962159] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 74.962232] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 74.962306] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 74.962374] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 74.962445] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 74.962518] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 74.962592] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 74.962669] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 74.962758] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 74.962854] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 74.962947] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 74.963036] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 74.963117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 74.963189] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 74.963262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 74.963347] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 74.963429] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 74.963511] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 74.963594] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 74.963661] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 74.963729] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 74.963804] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 74.963885] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 74.963970] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 74.964059] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 74.964140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 74.964211] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 74.964283] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 74.964354] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 74.964597] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 74.964696] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 74.984101] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<7>[ 75.015949] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<6>[ 75.192305] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 75.192310] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 75.192311] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 75.192465] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 75.192583] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 75.192677] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 75.192781] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 75.192916] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 75.193028] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 75.193182] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 75.193261] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 75.193338] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 75.193407] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 75.194677] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 75.194757] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 75.194839] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 75.194921] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 75.195004] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 75.195075] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 75.195143] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 75.195211] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 75.195276] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 75.195339] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 75.195404] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 75.195466] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 75.195527] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 75.195586] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 75.195645] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 75.195703] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 75.195768] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 75.195828] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 75.195893] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 75.195964] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 75.196037] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 75.196111] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 75.196184] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 75.196251] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 75.196315] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 75.196376] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 75.196437] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 75.196499] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 75.196559] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 75.196617] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 75.196674] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 75.196738] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 75.196800] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 75.196866] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 75.196943] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 75.197019] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 75.197098] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 75.197169] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 75.197572] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 75.197634] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 75.197690] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 75.198208] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 75.198268] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 75.198321] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 75.198661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 75.198715] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 75.198786] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 75.198858] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 75.198926] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 75.198994] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 75.200017] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 75.200164] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 75.200245] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 75.200321] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 75.200394] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 75.200464] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 75.200532] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 75.200598] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 75.200662] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 75.200717] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 75.200793] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 75.200857] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 75.200914] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 75.200969] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 75.201058] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 75.201266] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 75.204654] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 75.230732] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 75.231537] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 75.231611] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 75.240786] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 75.241203] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 75.242334] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 75.242415] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 75.242485] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 75.242547] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 75.242610] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 75.242670] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 75.242749] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 75.242820] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 75.242894] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7>[ 75.247004] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 75.247074] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7>[ 75.247142] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 75.251238] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 75.256375] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 75.256378] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 75.256379] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 75.256380] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 75.256381] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 75.256382] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 75.256382] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 75.256383] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 75.256384] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 75.256385] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 75.256448] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 75.256605] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 75.256770] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 75.258434] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 75.258533] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 75.258626] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 75.258704] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 75.258798] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 75.258896] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 75.258990] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 75.259074] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[ 75.259145] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[ 75.259213] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[ 75.259280] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 75.259348] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 75.259414] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 75.259480] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 75.259544] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 75.259607] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 75.259671] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 75.259738] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 75.259823] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 75.259905] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 75.259983] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 75.260054] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 75.260112] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 75.260169] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 75.260225] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 75.260281] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 75.260336] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 75.260390] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 75.260443] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 75.260507] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 75.261221] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 75.261307] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 75.261746] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 75.261841] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 75.262609] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 75.262677] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 75.262745] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 75.262825] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 75.262905] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 75.262982] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 75.263054] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 75.263109] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 75.263161] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 75.263212] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 75.263261] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 75.263311] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 75.263359] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 75.263406] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 75.263491] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 75.263594] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 75.291258] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 75.292403] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 75.292547] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 75.311765] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 19ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 75.312102] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 75.313155] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 75.315049] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 75.316913] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 75.358764] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 75.360113] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 75.360249] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 75.360389] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 75.360480] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 75.360582] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 75.360674] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 75.360781] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 75.360898] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 75.361787] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 75.361945] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 75.362052] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 75.365144] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 75.372709] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 75.375819] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 75.376357] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 75.378244] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 75.378365] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 75.379230] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 75.380448] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 75.380541] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 75.381456] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 75.382507] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 75.382605] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 75.383419] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 75.384655] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 75.384732] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 75.384773] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 75.412467] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 75.421458] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 75.423646] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 75.423802] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 75.425974] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[ 75.425964] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 75.426179] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 75.426355] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 75.426499] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 75.426641] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 75.426767] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 75.426882] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 75.427015] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 75.427135] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 75.427245] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<6>[ 75.427385] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 75.427805] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 75.427862] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 75.427964] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 75.428064] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 75.428161] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<7>[ 75.428439] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 75.428848] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 75.428867] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 75.429720] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 75.430254] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 75.430377] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 75.430498] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 75.430732] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 75.430738] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.430741] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.430742] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 75.430744] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.430746] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 75.430750] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.430752] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 75.430755] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.430783] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 75.430919] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 75.431598] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 75.431732] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 75.432455] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01
<7>[ 75.432762] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<7>[ 75.433027] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<5>[ 75.433377] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.433379] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 75.433380] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 75.433440] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 75.433454] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 75.433465] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 75.433475] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 75.433643] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 75.433654] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 75.433663] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 75.433820] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 75.433829] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 75.433836] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 75.433985] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 75.433995] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 75.433998] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 75.434000] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 75.434002] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 75.434104] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 75.434133] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[ 75.434135] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 75.434155] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 75.434198] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL
<7>[ 75.434206] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled
<7>[ 75.434268] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 75.434349] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<7>[ 75.442166] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01d96000
<6>[ 75.443573] fbcon: xedrmfb (fb0) is primary device
<7>[ 75.445302] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 75.445433] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 75.445541] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 75.445669] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 75.445804] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 75.445927] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 75.446048] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 75.446163] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 75.446275] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 75.446390] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 75.446504] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 75.446615] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 75.446719] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 75.446838] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 75.446945] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 75.447051] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 75.447155] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 75.447259] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 75.447362] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 75.447469] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 75.447571] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 75.447674] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 75.447775] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 75.447881] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 75.447984] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 75.448085] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 75.448183] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 75.448280] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 75.448377] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 75.448487] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 75.448595] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 75.448781] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 75.448904] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 75.449023] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 75.449130] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 75.449230] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 75.449332] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 75.449430] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.449527] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.449626] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.449710] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 75.449805] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.449895] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.449983] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.450068] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 75.450153] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.450237] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.450319] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.450415] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 75.450510] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.450592] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.450680] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.450774] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 75.450854] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.450932] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.451011] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 75.451090] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 75.451209] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 75.451324] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 75.451434] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 75.451539] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 75.451630] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 75.451746] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 75.451903] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 75.452028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 75.452140] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 75.452243] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 75.452346] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 75.452447] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 75.452548] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 75.452647] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 75.452749] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 75.452845] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 75.452939] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 75.453034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 75.453127] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 75.453220] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 75.453312] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 75.453404] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 75.453498] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 75.453591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 75.453684] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 75.453792] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 75.453892] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 75.453989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 75.454083] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 75.454176] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 75.454268] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 75.454360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 75.454449] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 75.454539] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 75.454634] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 75.454737] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 75.454828] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 75.454923] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 75.455005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 75.455087] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 75.455168] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 75.455249] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 75.455329] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 75.455413] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 75.455501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.455591] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.455680] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.455778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 75.455865] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 75.455950] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.456034] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.456117] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 75.456198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 75.456280] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 75.456361] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 75.456438] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 75.456516] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 75.456598] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 75.456682] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 75.456778] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 75.456861] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 75.457661] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<6>[ 75.461176] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 75.461407] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<7>[ 75.471537] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 75.471647] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 75.471748] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 75.471863] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 75.471975] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 75.472085] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 75.472185] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 75.472272] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 75.472352] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 75.472429] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 75.472506] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 75.472581] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 75.472661] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 75.472747] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 75.472844] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 75.472941] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 75.473035] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 75.473113] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 75.473191] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 75.473277] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 75.473369] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 75.473459] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 75.473549] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 75.473634] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 75.473703] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 75.473793] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 75.473883] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 75.473970] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 75.474055] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 75.474126] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 75.474203] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 75.474280] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 75.474355] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 75.474430] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 75.474504] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 75.474574] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 75.480174] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 75.481058] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 75.481502] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 75.481922] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 75.484010] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 75.663887] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 75.664116] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 75.665372] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 75.665492] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 75.665620] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000003 PP_CONTROL: 0x00000060
<7>[ 75.665800] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 75.665931] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 75.718066] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 75.718180] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 75.746765] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 75.747339] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 75.747380] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 75.748269] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 75.748285] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 75.749077] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 75.749188] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 75.749278] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 75.749355] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 75.749429] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 75.749499] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 75.749565] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 75.749630] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 75.749695] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 75.749770] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 75.749836] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 75.749899] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 75.749962] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 75.750037] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 75.751424] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 75.751517] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (496 ms remaining)
<7>[ 75.752389] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 75.752507] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 75.752607] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 75.752712] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 75.889897] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 76.255882] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 76.296126] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 76.296630] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 76.297090] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 76.333175] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 76.333632] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 76.334014] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 76.334515] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 76.456855] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 76.456855] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 76.456855] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 76.623680] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 76.625909] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 76.626237] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 76.629999] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 76.631333] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 76.632642] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 76.633902] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 76.635069] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 76.636504] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 76.636838] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 76.638644] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 76.638968] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 76.639793] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 76.640387] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 76.640780] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 76.641229] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 76.644090] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 76.644120] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 76.644470] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 76.657215] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 76.660584] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 76.661170] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 76.662822] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 76.666289] Console: switching to colour frame buffer device 180x56
<6>[ 76.682492] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 76.702821] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 76.703198] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 76.703270] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 76.703274] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 76.703597] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 76.703884] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 76.704136] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 76.704402] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 76.704373] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 76.704455] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 76.704603] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 76.704846] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 76.705076] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 76.705294] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 76.705511] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 76.705745] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 76.705964] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 76.706179] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 76.706392] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 76.706285] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 76.706604] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 76.706845] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 76.707057] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 76.707268] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 76.707273] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 76.707479] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 76.707693] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 76.707741] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 76.707933] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 76.708172] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 76.708939] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 76.708958] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 76.708964] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 76.708969] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 76.708978] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 76.708983] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 76.708998] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 76.709003] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 76.709012] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 76.709068] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 76.709451] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 76.709474] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 76.709839] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 76.710179] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 76.710581] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 76.711151] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 76.711481] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 76.711717] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 76.711966] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 76.714061] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 76.714566] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<5>[ 76.717113] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 76.717124] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 76.717130] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 76.717251] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 76.717315] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 76.717355] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 76.717390] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 76.717961] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 76.718418] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 76.718460] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 76.718492] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 76.719115] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 76.719547] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 76.719585] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 76.719617] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 76.720115] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 76.720587] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 76.720622] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 76.720635] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 76.720641] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 76.720649] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 76.721125] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 76.721188] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[ 76.721197] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 76.721430] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 76.721568] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<7>[ 76.728443] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 76.733192] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 76.733631] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 76.741602] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 76.774205] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 76.774301] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 76.774387] [IGT] xe_module_load: exiting, ret=0
<7>[ 76.823779] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 76.823941] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 76.823986] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 76.824045] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 76.824104] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 77.735821] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 77.735787] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 77.735787] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 79.273096] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 79.273472] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067