<5>[ 0.000000] Linux version 6.14.0-rc6-xe+ (builder@lgci) (gcc (Ubuntu 13.3.0-6ubuntu2~24.04) 13.3.0, GNU ld (GNU Binutils for Ubuntu) 2.42) #1 SMP PREEMPT_DYNAMIC Thu Mar 13 20:36:38 UTC 2025
<6>[ 0.000000] Command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<6>[ 0.000000] KERNEL supported cpus:
<6>[ 0.000000] Intel GenuineIntel
<6>[ 0.000000] AMD AuthenticAMD
<6>[ 0.000000] Hygon HygonGenuine
<6>[ 0.000000] Centaur CentaurHauls
<6>[ 0.000000] zhaoxin Shanghai
<6>[ 0.000000] x86/tme: not enabled by BIOS
<6>[ 0.000000] x86/split lock detection: #AC: crashing the kernel on kernel split_locks and warning on user-space split_locks
<6>[ 0.000000] BIOS-provided physical RAM map:
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006cac0fff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x000000006cac1000-0x000000006fe67fff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x000000006fe68000-0x000000006ff4ffff] ACPI NVS
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ff50000-0x000000006fffefff] ACPI data
<6>[ 0.000000] BIOS-e820: [mem 0x000000006ffff000-0x000000006fffffff] usable
<6>[ 0.000000] BIOS-e820: [mem 0x0000000070000000-0x00000000807fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed7ffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x00000000ff200000-0x00000001044fffff] reserved
<6>[ 0.000000] BIOS-e820: [mem 0x0000000104500000-0x000000087f7fffff] usable
<6>[ 0.000000] NX (Execute Disable) protection: active
<6>[ 0.000000] APIC: Static calls initialized
<6>[ 0.000000] efi: EFI v2.7 by Intel
<6>[ 0.000000] efi: ACPI=0x6fffe000 ACPI 2.0=0x6fffe014 TPMFinalLog=0x6fef5000 SMBIOS=0x6cbc7000 MEMATTR=0x68f39018 ESRT=0x68f71098 MOKvar=0x6cd0c000 TPMEventLog=0x6ff5a018
<6>[ 0.000000] efi: Remove mem254: MMIO range=[0xc0000000-0xcfffffff] (256MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xc0000000-0xcfffffff] reserved
<6>[ 0.000000] efi: Remove mem256: MMIO range=[0xff200000-0xffffffff] (14MB) from e820 map
<7>[ 0.000000] e820: remove [mem 0xff200000-0xffffffff] reserved
<6>[ 0.000000] SMBIOS 3.8 present.
<6>[ 0.000000] DMI: Intel Corporation Lunar Lake Client Platform/LNL-M LP5 RVP1, BIOS LNLMFWI1.R00.3223.D86.2501240726 01/24/2025
<6>[ 0.000000] DMI: Memory slots populated: 8/8
<6>[ 0.000000] tsc: Detected 3100.000 MHz processor
<6>[ 0.000000] tsc: Detected 3110.400 MHz TSC
<7>[ 0.000009] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
<7>[ 0.000010] e820: remove [mem 0x000a0000-0x000fffff] usable
<6>[ 0.000014] last_pfn = 0x87f800 max_arch_pfn = 0x400000000
<6>[ 0.000017] MTRR map: 6 entries (3 fixed + 3 variable; max 23), built from 10 variable MTRRs
<6>[ 0.000019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
<6>[ 0.000374] x2apic: enabled by BIOS, switching to x2apic ops
<6>[ 0.000375] last_pfn = 0x70000 max_arch_pfn = 0x400000000
<6>[ 0.004646] esrt: Reserving ESRT space from 0x0000000068f71098 to 0x0000000068f711e8.
<7>[ 0.004654] e820: update [mem 0x68f71000-0x68f71fff] usable ==> reserved
<6>[ 0.004672] Using GB pages for direct mapping
<6>[ 0.005365] printk: log buffer data + meta data: 1048576 + 3670016 = 4718592 bytes
<6>[ 0.005366] printk: early log buf free: 258888(98%)
<6>[ 0.005367] Secure boot disabled
<6>[ 0.005368] ACPI: Early table checksum verification disabled
<6>[ 0.005372] ACPI: RSDP 0x000000006FFFE014 000024 (v02 INTEL )
<6>[ 0.005374] ACPI: XSDT 0x000000006FF71228 0001A4 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005378] ACPI: FACP 0x000000006FFAA000 000114 (v06 INTEL LNL 00000002 01000013)
<6>[ 0.005381] ACPI: DSDT 0x000000006FFB6000 0254DE (v02 INTEL LNL 00000002 01000013)
<6>[ 0.005383] ACPI: FACS 0x000000006FED9000 000040
<6>[ 0.005384] ACPI: SSDT 0x000000006FFFC000 000388 (v02 PmaxDv Pmax_Dev 00000001 INTL 20210930)
<6>[ 0.005386] ACPI: SSDT 0x000000006FFFB000 0006AA (v02 PmRef Cpu0Ist 00003000 INTL 20210930)
<6>[ 0.005387] ACPI: SSDT 0x000000006FFFA000 0005FB (v02 PmRef Cpu0Hwp 00003000 INTL 20210930)
<6>[ 0.005388] ACPI: SSDT 0x000000006FFF9000 0001AB (v02 PmRef Cpu0Psd 00003000 INTL 20210930)
<6>[ 0.005389] ACPI: SSDT 0x000000006FFF8000 000394 (v02 PmRef Cpu0Cst 00003001 INTL 20210930)
<6>[ 0.005391] ACPI: SSDT 0x000000006FFF6000 001BAF (v02 PmRef ApIst 00003000 INTL 20210930)
<6>[ 0.005392] ACPI: SSDT 0x000000006FFF4000 001620 (v02 PmRef ApHwp 00003000 INTL 20210930)
<6>[ 0.005393] ACPI: SSDT 0x000000006FFF2000 001349 (v02 PmRef ApPsd 00003000 INTL 20210930)
<6>[ 0.005395] ACPI: SSDT 0x000000006FFF1000 000FBB (v02 PmRef ApCst 00003000 INTL 20210930)
<6>[ 0.005396] ACPI: SSDT 0x000000006FFED000 003BD7 (v02 CpuRef CpuSsdt 00003000 INTL 20210930)
<6>[ 0.005397] ACPI: DTPR 0x000000006FFEC000 000090 (v01 00000000 00000000)
<6>[ 0.005399] ACPI: SSDT 0x000000006FFEB000 000FE2 (v02 INTEL PDatTabl 00001000 INTL 20210930)
<6>[ 0.005400] ACPI: SSDT 0x000000006FFE8000 002450 (v02 INTEL IgfxSsdt 00003000 INTL 20210930)
<6>[ 0.005401] ACPI: SSDT 0x000000006FFE7000 0000A5 (v02 INTEL TseSsdt 00001000 INTL 20210930)
<6>[ 0.005403] ACPI: SSDT 0x000000006FFDD000 009156 (v02 INTEL TcssSsdt 00001000 INTL 20210930)
<6>[ 0.005404] ACPI: SSDT 0x000000006FFDC000 0000E0 (v02 INTEL IpuSsdt 00001000 INTL 20210930)
<6>[ 0.005405] ACPI: SSDT 0x000000006FFB1000 004AC3 (v02 INTEL LnlMRvp1 00001000 INTL 20210930)
<6>[ 0.005406] ACPI: SSDT 0x000000006FFAF000 00140F (v02 INTEL I2Pm_Rvp 00001000 INTL 20210930)
<6>[ 0.005408] ACPI: SSDT 0x000000006FFAB000 003956 (v02 INTEL Ther_Rvp 00001000 INTL 20210930)
<6>[ 0.005409] ACPI: HPET 0x000000006FFA9000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005410] ACPI: WSMT 0x000000006FFFD000 000028 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005412] ACPI: APIC 0x000000006FFA7000 0000D8 (v06 INTEL LNL 00000000 01000013)
<6>[ 0.005413] ACPI: MCFG 0x000000006FFA6000 00003C (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005414] ACPI: SSDT 0x000000006FFA5000 0006E3 (v02 INTEL PepoSsdt 00001000 INTL 20210930)
<6>[ 0.005416] ACPI: SSDT 0x000000006FF9F000 005321 (v02 DptfTb DptfTabl 00001000 INTL 20210930)
<6>[ 0.005417] ACPI: SSDT 0x000000006FF94000 00A46A (v02 MiCaTb MiCaTabl 00001000 INTL 20210930)
<6>[ 0.005418] ACPI: SSDT 0x000000006FF86000 00D816 (v02 INTEL Cnv_Ssdt 00001000 INTL 20210930)
<6>[ 0.005419] ACPI: SSDT 0x000000006FF85000 00060E (v02 INTEL Tpm2Tabl 00001000 INTL 20210930)
<6>[ 0.005421] ACPI: TPM2 0x000000006FF84000 00004C (v04 INTEL LNL 00000002 01000013)
<6>[ 0.005422] ACPI: LPIT 0x000000006FF83000 0000CC (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005423] ACPI: SSDT 0x000000006FF82000 000D5C (v02 INTEL PtidDevc 00001000 INTL 20210930)
<6>[ 0.005424] ACPI: SSDT 0x000000006FF81000 0001F0 (v02 INTEL TbtTypeC 00000000 INTL 20210930)
<6>[ 0.005426] ACPI: DBGP 0x000000006FF80000 000034 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005427] ACPI: DBG2 0x000000006FF7F000 000054 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005428] ACPI: NHLT 0x000000006FF7E000 0002E3 (v00 INTEL LNL 00000002 01000013)
<6>[ 0.005429] ACPI: SSDT 0x000000006FF7C000 00115C (v02 INTEL UsbCTabl 00001000 INTL 20210930)
<6>[ 0.005431] ACPI: SSDT 0x000000006FF75000 00653B (v02 INTEL EcSsdt 00000000 INTL 20210930)
<6>[ 0.005432] ACPI: ECDT 0x000000006FF74000 000069 (v01 LNL 00000002 01000013)
<6>[ 0.005433] ACPI: DMAR 0x000000006FF73000 0000D8 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005435] ACPI: FPDT 0x000000006FF72000 000044 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005436] ACPI: SSDT 0x000000006FFA8000 00086D (v02 INTEL xh_lnl_m 00000000 INTL 20210930)
<6>[ 0.005437] ACPI: SSDT 0x000000006FF6F000 0013DB (v02 SocGpe SocGpe 00003000 INTL 20210930)
<6>[ 0.005438] ACPI: SSDT 0x000000006FF6C000 002463 (v02 SocCmn SocCmn 00003000 INTL 20210930)
<6>[ 0.005440] ACPI: SDEV 0x000000006FF6B000 000046 (v01 00000000 00000000)
<6>[ 0.005441] ACPI: SSDT 0x000000006FF60000 00A4FA (v02 INTEL St09Ssdt 00001000 INTL 20210930)
<6>[ 0.005442] ACPI: PHAT 0x000000006FF5F000 0007C0 (v01 INTEL LNL 00000005 MSFT 0100000D)
<6>[ 0.005444] ACPI: BGRT 0x000000006FF5E000 000038 (v01 INTEL LNL 00000002 01000013)
<6>[ 0.005445] ACPI: Reserving FACP table memory at [mem 0x6ffaa000-0x6ffaa113]
<6>[ 0.005446] ACPI: Reserving DSDT table memory at [mem 0x6ffb6000-0x6ffdb4dd]
<6>[ 0.005446] ACPI: Reserving FACS table memory at [mem 0x6fed9000-0x6fed903f]
<6>[ 0.005446] ACPI: Reserving SSDT table memory at [mem 0x6fffc000-0x6fffc387]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6fffb000-0x6fffb6a9]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6fffa000-0x6fffa5fa]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6fff9000-0x6fff91aa]
<6>[ 0.005447] ACPI: Reserving SSDT table memory at [mem 0x6fff8000-0x6fff8393]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6fff6000-0x6fff7bae]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6fff4000-0x6fff561f]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6fff2000-0x6fff3348]
<6>[ 0.005448] ACPI: Reserving SSDT table memory at [mem 0x6fff1000-0x6fff1fba]
<6>[ 0.005449] ACPI: Reserving SSDT table memory at [mem 0x6ffed000-0x6fff0bd6]
<6>[ 0.005449] ACPI: Reserving DTPR table memory at [mem 0x6ffec000-0x6ffec08f]
<6>[ 0.005449] ACPI: Reserving SSDT table memory at [mem 0x6ffeb000-0x6ffebfe1]
<6>[ 0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ffe8000-0x6ffea44f]
<6>[ 0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ffe7000-0x6ffe70a4]
<6>[ 0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ffdd000-0x6ffe6155]
<6>[ 0.005450] ACPI: Reserving SSDT table memory at [mem 0x6ffdc000-0x6ffdc0df]
<6>[ 0.005451] ACPI: Reserving SSDT table memory at [mem 0x6ffb1000-0x6ffb5ac2]
<6>[ 0.005451] ACPI: Reserving SSDT table memory at [mem 0x6ffaf000-0x6ffb040e]
<6>[ 0.005451] ACPI: Reserving SSDT table memory at [mem 0x6ffab000-0x6ffae955]
<6>[ 0.005451] ACPI: Reserving HPET table memory at [mem 0x6ffa9000-0x6ffa9037]
<6>[ 0.005452] ACPI: Reserving WSMT table memory at [mem 0x6fffd000-0x6fffd027]
<6>[ 0.005452] ACPI: Reserving APIC table memory at [mem 0x6ffa7000-0x6ffa70d7]
<6>[ 0.005452] ACPI: Reserving MCFG table memory at [mem 0x6ffa6000-0x6ffa603b]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6ffa5000-0x6ffa56e2]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6ff9f000-0x6ffa4320]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6ff94000-0x6ff9e469]
<6>[ 0.005453] ACPI: Reserving SSDT table memory at [mem 0x6ff86000-0x6ff93815]
<6>[ 0.005454] ACPI: Reserving SSDT table memory at [mem 0x6ff85000-0x6ff8560d]
<6>[ 0.005454] ACPI: Reserving TPM2 table memory at [mem 0x6ff84000-0x6ff8404b]
<6>[ 0.005454] ACPI: Reserving LPIT table memory at [mem 0x6ff83000-0x6ff830cb]
<6>[ 0.005454] ACPI: Reserving SSDT table memory at [mem 0x6ff82000-0x6ff82d5b]
<6>[ 0.005455] ACPI: Reserving SSDT table memory at [mem 0x6ff81000-0x6ff811ef]
<6>[ 0.005455] ACPI: Reserving DBGP table memory at [mem 0x6ff80000-0x6ff80033]
<6>[ 0.005455] ACPI: Reserving DBG2 table memory at [mem 0x6ff7f000-0x6ff7f053]
<6>[ 0.005456] ACPI: Reserving NHLT table memory at [mem 0x6ff7e000-0x6ff7e2e2]
<6>[ 0.005456] ACPI: Reserving SSDT table memory at [mem 0x6ff7c000-0x6ff7d15b]
<6>[ 0.005456] ACPI: Reserving SSDT table memory at [mem 0x6ff75000-0x6ff7b53a]
<6>[ 0.005456] ACPI: Reserving ECDT table memory at [mem 0x6ff74000-0x6ff74068]
<6>[ 0.005457] ACPI: Reserving DMAR table memory at [mem 0x6ff73000-0x6ff730d7]
<6>[ 0.005457] ACPI: Reserving FPDT table memory at [mem 0x6ff72000-0x6ff72043]
<6>[ 0.005457] ACPI: Reserving SSDT table memory at [mem 0x6ffa8000-0x6ffa886c]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ff6f000-0x6ff703da]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ff6c000-0x6ff6e462]
<6>[ 0.005458] ACPI: Reserving SDEV table memory at [mem 0x6ff6b000-0x6ff6b045]
<6>[ 0.005458] ACPI: Reserving SSDT table memory at [mem 0x6ff60000-0x6ff6a4f9]
<6>[ 0.005459] ACPI: Reserving PHAT table memory at [mem 0x6ff5f000-0x6ff5f7bf]
<6>[ 0.005459] ACPI: Reserving BGRT table memory at [mem 0x6ff5e000-0x6ff5e037]
<6>[ 0.005528] APIC: Switched APIC routing to: cluster x2apic
<6>[ 0.005737] No NUMA configuration found
<6>[ 0.005737] Faking a node at [mem 0x0000000000000000-0x000000087f7fffff]
<6>[ 0.005742] NODE_DATA(0) allocated [mem 0x87f352fc0-0x87f37dfff]
<6>[ 0.005852] Zone ranges:
<6>[ 0.005853] DMA [mem 0x0000000000001000-0x0000000000ffffff]
<6>[ 0.005854] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
<6>[ 0.005854] Normal [mem 0x0000000100000000-0x000000087f7fffff]
<6>[ 0.005855] Device empty
<6>[ 0.005856] Movable zone start for each node
<6>[ 0.005856] Early memory node ranges
<6>[ 0.005857] node 0: [mem 0x0000000000001000-0x000000000009efff]
<6>[ 0.005857] node 0: [mem 0x0000000000100000-0x000000006cac0fff]
<6>[ 0.005858] node 0: [mem 0x000000006ffff000-0x000000006fffffff]
<6>[ 0.005858] node 0: [mem 0x0000000104500000-0x000000087f7fffff]
<6>[ 0.005860] Initmem setup node 0 [mem 0x0000000000001000-0x000000087f7fffff]
<6>[ 0.005864] On node 0, zone DMA: 1 pages in unavailable ranges
<6>[ 0.005882] On node 0, zone DMA: 97 pages in unavailable ranges
<6>[ 0.007921] On node 0, zone DMA32: 13630 pages in unavailable ranges
<6>[ 0.036446] On node 0, zone Normal: 17664 pages in unavailable ranges
<6>[ 0.036514] On node 0, zone Normal: 2048 pages in unavailable ranges
<6>[ 0.036995] ACPI: PM-Timer IO Port: 0x1808
<6>[ 0.037000] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1])
<6>[ 0.037051] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
<6>[ 0.037053] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>[ 0.037054] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<6>[ 0.037056] ACPI: Using ACPI (MADT) for SMP configuration information
<6>[ 0.037057] ACPI: HPET id: 0x8086a701 base: 0xfed00000
<7>[ 0.037068] e820: update [mem 0x68f52000-0x68f6cfff] usable ==> reserved
<6>[ 0.037074] TSC deadline timer available
<6>[ 0.037076] CPU topo: Max. logical packages: 1
<6>[ 0.037076] CPU topo: Max. logical dies: 1
<6>[ 0.037077] CPU topo: Max. dies per package: 1
<6>[ 0.037078] CPU topo: Max. threads per core: 1
<6>[ 0.037079] CPU topo: Num. cores per package: 8
<6>[ 0.037079] CPU topo: Num. threads per package: 8
<6>[ 0.037079] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
<6>[ 0.037092] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
<6>[ 0.037093] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
<6>[ 0.037094] PM: hibernation: Registered nosave memory: [mem 0x68f52000-0x68f6cfff]
<6>[ 0.037095] PM: hibernation: Registered nosave memory: [mem 0x68f71000-0x68f71fff]
<6>[ 0.037095] PM: hibernation: Registered nosave memory: [mem 0x6cac1000-0x6fe67fff]
<6>[ 0.037096] PM: hibernation: Registered nosave memory: [mem 0x6fe68000-0x6ff4ffff]
<6>[ 0.037096] PM: hibernation: Registered nosave memory: [mem 0x6ff50000-0x6fffefff]
<6>[ 0.037097] PM: hibernation: Registered nosave memory: [mem 0x70000000-0x807fffff]
<6>[ 0.037097] PM: hibernation: Registered nosave memory: [mem 0x80800000-0xfed1ffff]
<6>[ 0.037097] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfed7ffff]
<6>[ 0.037098] PM: hibernation: Registered nosave memory: [mem 0xfed80000-0xffffffff]
<6>[ 0.037098] PM: hibernation: Registered nosave memory: [mem 0x100000000-0x1044fffff]
<6>[ 0.037100] [mem 0x80800000-0xfed1ffff] available for PCI devices
<6>[ 0.037100] Booting paravirtualized kernel on bare hardware
<6>[ 0.037102] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
<6>[ 0.037110] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
<6>[ 0.037444] percpu: Embedded 91 pages/cpu s249856 r8192 d114688 u524288
<7>[ 0.037448] pcpu-alloc: s249856 r8192 d114688 u524288 alloc=1*2097152
<7>[ 0.037449] pcpu-alloc: [0] 0 1 2 3 [0] 4 5 6 7
<5>[ 0.037462] Kernel command line: BOOT_IMAGE=/boot/drm_intel root=/dev/nvme0n1p2 rootwait fsck.repair=yes nmi_watchdog=panic,auto panic=5 softdog.soft_panic=5 log_buf_len=1M trace_clock=global xe.force_probe=* i915.force_probe=* drm.debug=0xe modprobe.blacklist=xe,i915,ast ro
<5>[ 0.037541] Unknown kernel command line parameters "BOOT_IMAGE=/boot/drm_intel", will be passed to user space.
<5>[ 0.037555] random: crng init done
<6>[ 0.039418] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
<6>[ 0.040336] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
<6>[ 0.040391] Fallback order for Node 0: 0
<6>[ 0.040394] Built 1 zonelists, mobility grouping on. Total pages: 8289632
<6>[ 0.040395] Policy zone: Normal
<6>[ 0.040404] mem auto-init: stack:off, heap alloc:on, heap free:off
<6>[ 0.040405] stackdepot: allocating hash table via alloc_large_system_hash
<6>[ 0.040406] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
<6>[ 0.041334] software IO TLB: area num 8.
<4>[ 0.087097] **********************************************************
<4>[ 0.087098] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.087098] ** **
<4>[ 0.087098] ** This system shows unhashed kernel memory addresses **
<4>[ 0.087099] ** via the console, logs, and other interfaces. This **
<4>[ 0.087099] ** might reduce the security of your system. **
<4>[ 0.087099] ** **
<4>[ 0.087099] ** If you see this message and you are not debugging **
<4>[ 0.087099] ** the kernel, report this immediately to your system **
<4>[ 0.087100] ** administrator! **
<4>[ 0.087100] ** **
<4>[ 0.087100] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
<4>[ 0.087100] **********************************************************
<6>[ 0.088156] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
<6>[ 0.088474] ftrace: allocating 59560 entries in 233 pages
<6>[ 0.113859] ftrace: allocated 233 pages with 5 groups
<6>[ 0.115077] Dynamic Preempt: voluntary
<6>[ 0.115524] Running RCU self tests
<6>[ 0.115524] Running RCU synchronous self tests
<6>[ 0.115525] rcu: Preemptible hierarchical RCU implementation.
<6>[ 0.115525] rcu: RCU lockdep checking is enabled.
<6>[ 0.115525] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
<6>[ 0.115526] Trampoline variant of Tasks RCU enabled.
<6>[ 0.115526] Rude variant of Tasks RCU enabled.
<6>[ 0.115526] Tracing variant of Tasks RCU enabled.
<6>[ 0.115527] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
<6>[ 0.115527] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
<6>[ 0.115565] Running RCU synchronous self tests
<6>[ 0.115570] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115573] RCU Tasks Rude: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.115576] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8.
<6>[ 0.125607] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
<6>[ 0.126058] rcu: srcu_init: Setting srcu_struct sizes based on contention.
<6>[ 0.126393] Console: colour dummy device 80x25
<6>[ 0.126401] printk: legacy console [tty0] enabled
<6>[ 0.127616] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
<6>[ 0.127623] ... MAX_LOCKDEP_SUBCLASSES: 8
<6>[ 0.127627] ... MAX_LOCK_DEPTH: 48
<6>[ 0.127630] ... MAX_LOCKDEP_KEYS: 8192
<6>[ 0.127634] ... CLASSHASH_SIZE: 4096
<6>[ 0.127638] ... MAX_LOCKDEP_ENTRIES: 524288
<6>[ 0.127642] ... MAX_LOCKDEP_CHAINS: 524288
<6>[ 0.127645] ... CHAINHASH_SIZE: 262144
<6>[ 0.127649] memory used by lock dependency info: 54145 kB
<6>[ 0.127653] memory used for stack traces: 4224 kB
<6>[ 0.127657] per task-struct memory footprint: 1920 bytes
<6>[ 0.127709] ACPI: Core revision 20240827
<6>[ 0.128583] hpet: HPET dysfunctional in PC10. Force disabled.
<6>[ 0.128647] APIC: Switch to symmetric I/O mode setup
<6>[ 0.128652] DMAR: Host address width 38
<6>[ 0.128656] DMAR: DRHD base: 0x000000fc800000 flags: 0x0
<6>[ 0.128687] DMAR: dmar0: reg_base_addr fc800000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128719] DMAR: DRHD base: 0x000000fc810000 flags: 0x0
<6>[ 0.128740] DMAR: dmar1: reg_base_addr fc810000 ver 7:1 cap e9de008cee690402 ecap 1aca9a00f0ef5e
<6>[ 0.128765] DMAR: DRHD base: 0x000000fc820000 flags: 0x1
<6>[ 0.128787] DMAR: dmar2: reg_base_addr fc820000 ver 7:1 cap e9de008cee690402 ecap 1ac89800f0efda
<6>[ 0.128820] DMAR: SATC flags: 0x1
<6>[ 0.128829] DMAR-IR: IOAPIC id 2 under DRHD base 0xfc820000 IOMMU 2
<6>[ 0.128834] DMAR-IR: HPET id 0 under DRHD base 0xfc820000
<6>[ 0.128838] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
<6>[ 0.130895] DMAR-IR: Enabled IRQ remapping in x2apic mode
<6>[ 0.135945] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 0.135963] Calibrating delay loop (skipped), value calculated using timer frequency.. 6220.80 BogoMIPS (lpj=3110400)
<6>[ 0.136035] CPU0: Thermal monitoring enabled (TM1)
<6>[ 0.136041] x86/cpu: User Mode Instruction Prevention (UMIP) activated
<6>[ 0.136215] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
<6>[ 0.136220] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
<6>[ 0.136230] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
<6>[ 0.136237] Spectre V2 : Mitigation: Enhanced / Automatic IBRS
<6>[ 0.136242] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
<6>[ 0.136249] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
<6>[ 0.136257] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
<6>[ 0.136273] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
<6>[ 0.136280] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
<6>[ 0.136286] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
<6>[ 0.136291] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
<6>[ 0.136298] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
<6>[ 0.136305] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
<6>[ 0.136311] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
<6>[ 0.136316] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
<6>[ 0.136322] x86/fpu: Enabled xstate features 0xa07, context size is 856 bytes, using 'compacted' format.
<6>[ 0.136958] Freeing SMP alternatives memory: 48K
<6>[ 0.136958] pid_max: default: 32768 minimum: 301
<6>[ 0.136958] LSM: initializing lsm=capability,landlock,yama,apparmor,ima,evm
<6>[ 0.136958] landlock: Up and running.
<6>[ 0.136958] Yama: becoming mindful.
<6>[ 0.136958] AppArmor: AppArmor initialized
<6>[ 0.136958] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136958] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
<6>[ 0.136958] Running RCU synchronous self tests
<6>[ 0.136958] Running RCU synchronous self tests
<6>[ 0.136958] smpboot: CPU0: Intel(R) Core(TM) Ultra 5 238V (family: 0x6, model: 0xbd, stepping: 0x1)
<6>[ 0.136958] Running RCU Tasks wait API self tests
<6>[ 0.136958] Running RCU Tasks Rude wait API self tests
<6>[ 0.136958] Running RCU Tasks Trace wait API self tests
<6>[ 0.136958] Performance Events: XSAVE Architectural LBR, PEBS fmt4+-baseline, AnyThread deprecated, Lunarlake Hybrid events, 32-deep LBR, full-width counters, Intel PMU driver.
<6>[ 0.136958] core: cpu_core PMU driver:
<6>[ 0.136962] ... version: 6
<6>[ 0.136966] ... bit width: 48
<6>[ 0.136969] ... generic registers: 10
<6>[ 0.136973] ... value mask: 0000ffffffffffff
<6>[ 0.136977] ... max period: 00007fffffffffff
<6>[ 0.136981] ... fixed-purpose events: 4
<6>[ 0.136985] ... event mask: 0001000f000003ff
<6>[ 0.137015] signal: max sigframe size: 3632
<6>[ 0.137036] Estimated ratio of average max frequency by base frequency (times 1024): 1189
<6>[ 0.137120] rcu: Hierarchical SRCU implementation.
<6>[ 0.137124] rcu: Max phase no-delay instances is 400.
<6>[ 0.137261] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
<6>[ 0.139055] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
<6>[ 0.139316] smp: Bringing up secondary CPUs ...
<6>[ 0.139664] smpboot: x86: Booting SMP configuration:
<6>[ 0.139670] .... node #0, CPUs: #1 #2 #3
<6>[ 0.143154] Callback from call_rcu_tasks_trace() invoked.
<4>[ 0.146052] #4 #5 #6 #7
<6>[ 0.010712] core: cpu_atom PMU driver:
<6>[ 0.010712] ... version: 6
<6>[ 0.010712] ... bit width: 48
<6>[ 0.010712] ... generic registers: 8
<6>[ 0.010712] ... value mask: 0000ffffffffffff
<6>[ 0.010712] ... max period: 00007fffffffffff
<6>[ 0.010712] ... fixed-purpose events: 6
<6>[ 0.010712] ... event mask: 00000077000000ff
<6>[ 0.157003] smp: Brought up 1 node, 8 CPUs
<6>[ 0.157052] smpboot: Total of 8 processors activated (49766.40 BogoMIPS)
<6>[ 0.159162] Memory: 32360156K/33158528K available (24294K kernel code, 5580K rwdata, 9276K rodata, 5624K init, 68408K bss, 775236K reserved, 0K cma-reserved)
<6>[ 0.160787] devtmpfs: initialized
<6>[ 0.161072] x86/mm: Memory block size: 128MB
<6>[ 0.176412] ACPI: PM: Registering ACPI NVS region [mem 0x6fe68000-0x6ff4ffff] (950272 bytes)
<6>[ 0.177141] Running RCU synchronous self tests
<6>[ 0.177152] Running RCU synchronous self tests
<6>[ 0.177169] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.177169] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
<6>[ 0.177289] pinctrl core: initialized pinctrl subsystem
<6>[ 0.178165] PM: RTC time: 08:05:47, date: 2025-03-14
<6>[ 0.179111] NET: Registered PF_NETLINK/PF_ROUTE protocol family
<6>[ 0.180019] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
<6>[ 0.180329] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
<6>[ 0.180614] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
<6>[ 0.180679] audit: initializing netlink subsys (disabled)
<5>[ 0.181034] audit: type=2000 audit(1741939547.045:1): state=initialized audit_enabled=0 res=1
<6>[ 0.181671] thermal_sys: Registered thermal governor 'fair_share'
<6>[ 0.181673] thermal_sys: Registered thermal governor 'bang_bang'
<6>[ 0.181680] thermal_sys: Registered thermal governor 'step_wise'
<6>[ 0.181684] thermal_sys: Registered thermal governor 'user_space'
<6>[ 0.181689] thermal_sys: Registered thermal governor 'power_allocator'
<6>[ 0.181731] EISA bus registered
<6>[ 0.181759] cpuidle: using governor ladder
<6>[ 0.181759] cpuidle: using governor menu
<6>[ 0.182072] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
<6>[ 0.182438] PCI: ECAM [mem 0xc0000000-0xcfffffff] (base 0xc0000000) for domain 0000 [bus 00-ff]
<6>[ 0.182464] PCI: Using configuration type 1 for base access
<6>[ 0.182606] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
<6>[ 0.184226] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
<6>[ 0.184226] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
<6>[ 0.184226] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
<6>[ 0.184226] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
<6>[ 0.207959] raid6: avx2x4 gen() 74690 MB/s
<6>[ 0.224960] raid6: avx2x2 gen() 76979 MB/s
<6>[ 0.241958] raid6: avx2x1 gen() 73757 MB/s
<6>[ 0.241962] raid6: using algorithm avx2x2 gen() 76979 MB/s
<6>[ 0.258959] raid6: .... xor() 57662 MB/s, rmw enabled
<6>[ 0.258963] raid6: using avx2x2 recovery algorithm
<6>[ 0.261901] fbcon: Taking over console
<6>[ 0.262193] ACPI: Added _OSI(Module Device)
<6>[ 0.262201] ACPI: Added _OSI(Processor Device)
<6>[ 0.262207] ACPI: Added _OSI(3.0 _SCP Extensions)
<6>[ 0.262214] ACPI: Added _OSI(Processor Aggregator Device)
<6>[ 0.911679] ACPI: 32 ACPI AML tables successfully acquired and loaded
<6>[ 0.934934] ACPI: EC: EC started
<6>[ 0.934946] ACPI: EC: interrupt blocked
<6>[ 0.938562] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 0.938569] ACPI: EC: Boot ECDT EC used to handle transactions
<6>[ 1.008237] Callback from call_rcu_tasks() invoked.
<6>[ 1.294038] ACPI: USB4 _OSC: OS supports USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.294059] ACPI: USB4 _OSC: OS controls USB3+ DisplayPort+ PCIe+ XDomain+
<6>[ 1.343683] ACPI: Interpreter enabled
<6>[ 1.343779] ACPI: PM: (supports S0 S4 S5)
<6>[ 1.343784] ACPI: Using IOAPIC for interrupt routing
<6>[ 1.356111] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
<6>[ 1.356140] PCI: Ignoring E820 reservations for host bridge windows
<6>[ 1.387665] ACPI: Enabled 10 GPEs in block 00 to 7F
<6>[ 1.387715] ACPI: Enabled 13 GPEs in block 80 to DF
<6>[ 1.472842] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.BTRT: New power resource
<6>[ 1.473624] ACPI: \_SB_.PC00.XHCI.RHUB.HS06.DBTR: New power resource
<6>[ 1.482164] ACPI: \_SB_.PC00.PAUD: New power resource
<6>[ 1.997958] ACPI: \_SB_.PC00.CNVW.WRST: New power resource
<6>[ 2.026196] ACPI: \_SB_.PC00.RP02.PXP_: New power resource
<6>[ 2.171198] ACPI: \_SB_.PC00.RP03.PXSX.WRST: New power resource
<6>[ 2.173091] ACPI: \_SB_.PC00.RP04.PXP_: New power resource
<6>[ 2.181393] ACPI: \_SB_.PC00.RP05.PXP_: New power resource
<6>[ 2.190553] ACPI: \_SB_.PC00.TBT0: New power resource
<6>[ 2.190794] ACPI: \_SB_.PC00.TBT1: New power resource
<6>[ 2.191028] ACPI: \_SB_.PC00.D3C_: New power resource
<3>[ 2.265623] ACPI: \: Can't tag data node
<3>[ 2.266898] ACPI: \: Can't tag data node
<3>[ 2.268035] ACPI: \: Can't tag data node
<3>[ 2.269085] ACPI: \: Can't tag data node
<3>[ 2.270204] ACPI: \: Can't tag data node
<6>[ 2.373709] ACPI: \_TZ_.FN00: New power resource
<6>[ 2.374205] ACPI: \_TZ_.FN01: New power resource
<6>[ 2.374686] ACPI: \_TZ_.FN02: New power resource
<6>[ 2.375546] ACPI: \_TZ_.FN03: New power resource
<6>[ 2.376039] ACPI: \_TZ_.FN04: New power resource
<6>[ 2.377334] ACPI: \PIN_: New power resource
<6>[ 2.380745] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-fe])
<6>[ 2.380760] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
<6>[ 2.384184] acpi PNP0A08:00: _OSC: OS now controls [SHPCHotplug PME AER PCIeCapability LTR DPC]
<6>[ 2.393241] PCI host bridge to bus 0000:00
<6>[ 2.393271] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
<6>[ 2.393279] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
<6>[ 2.393285] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
<6>[ 2.393293] pci_bus 0000:00: root bus resource [mem 0x80800000-0xbfffffff window]
<6>[ 2.393300] pci_bus 0000:00: root bus resource [mem 0x2000000000-0x3fbfffffff window]
<6>[ 2.393308] pci_bus 0000:00: root bus resource [bus 00-fe]
<6>[ 2.396366] pci 0000:00:00.0: [8086:6400] type 00 class 0x060000 conventional PCI endpoint
<6>[ 2.396926] pci 0000:00:02.0: [8086:64a0] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
<6>[ 2.397013] pci 0000:00:02.0: BAR 0 [mem 0x3814000000-0x3814ffffff 64bit pref]
<6>[ 2.397021] pci 0000:00:02.0: BAR 2 [mem 0x2000000000-0x200fffffff 64bit pref]
<6>[ 2.397030] pci 0000:00:02.0: ROM [mem 0xffe00000-0xffffffff pref]
<6>[ 2.397074] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
<6>[ 2.398262] pci 0000:00:04.0: [8086:641d] type 00 class 0x118000 conventional PCI endpoint
<6>[ 2.398291] pci 0000:00:04.0: BAR 0 [mem 0x3815300000-0x381531ffff 64bit]
<6>[ 2.399583] pci 0000:00:05.0: [8086:645d] type 00 class 0x048000 PCIe Root Complex Integrated Endpoint
<6>[ 2.399613] pci 0000:00:05.0: BAR 0 [mem 0x3812000000-0x3813ffffff 64bit]
<6>[ 2.399620] pci 0000:00:05.0: BAR 4 [mem 0x3815373000-0x3815373fff 64bit]
<6>[ 2.400412] pci 0000:00:07.0: [8086:a84e] type 01 class 0x060400 PCIe Root Port
<6>[ 2.400456] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.400468] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 2.400486] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 2.400606] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
<6>[ 2.400660] pci 0000:00:07.0: PTM enabled (root), 4ns granularity
<6>[ 2.404816] pci 0000:00:07.1: [8086:a84f] type 01 class 0x060400 PCIe Root Port
<6>[ 2.404865] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.404877] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 2.404896] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 2.405011] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
<6>[ 2.405068] pci 0000:00:07.1: PTM enabled (root), 4ns granularity
<6>[ 2.409076] pci 0000:00:07.2: [8086:a860] type 01 class 0x060400 PCIe Root Port
<6>[ 2.409126] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.409138] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 2.409156] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 2.409277] pci 0000:00:07.2: PME# supported from D0 D3hot D3cold
<6>[ 2.409334] pci 0000:00:07.2: PTM enabled (root), 4ns granularity
<6>[ 2.413530] pci 0000:00:0a.0: [8086:647d] type 00 class 0x118000 PCIe Root Complex Integrated Endpoint
<6>[ 2.413566] pci 0000:00:0a.0: BAR 0 [mem 0x3815350000-0x381535ffff 64bit]
<6>[ 2.413581] pci 0000:00:0a.0: enabling Extended Tags
<6>[ 2.413776] pci 0000:00:0b.0: [8086:643e] type 00 class 0x120000 PCIe Root Complex Integrated Endpoint
<6>[ 2.413805] pci 0000:00:0b.0: BAR 0 [mem 0x3810000000-0x3811ffffff 64bit]
<6>[ 2.413812] pci 0000:00:0b.0: BAR 4 [mem 0x3815372000-0x3815372fff 64bit]
<6>[ 2.414190] pci 0000:00:0d.0: [8086:a831] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.414243] pci 0000:00:0d.0: BAR 0 [mem 0x3815340000-0x381534ffff 64bit]
<6>[ 2.414313] pci 0000:00:0d.0: PME# supported from D3hot D3cold
<6>[ 2.416070] pci 0000:00:0d.2: [8086:a833] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.416122] pci 0000:00:0d.2: BAR 0 [mem 0x38152c0000-0x38152fffff 64bit]
<6>[ 2.416130] pci 0000:00:0d.2: BAR 2 [mem 0x3815371000-0x3815371fff 64bit]
<6>[ 2.416188] pci 0000:00:0d.2: supports D1 D2
<6>[ 2.416192] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.417370] pci 0000:00:0d.3: [8086:a834] type 00 class 0x0c0340 conventional PCI endpoint
<6>[ 2.417423] pci 0000:00:0d.3: BAR 0 [mem 0x3815280000-0x38152bffff 64bit]
<6>[ 2.417431] pci 0000:00:0d.3: BAR 2 [mem 0x3815370000-0x3815370fff 64bit]
<6>[ 2.417488] pci 0000:00:0d.3: supports D1 D2
<6>[ 2.417492] pci 0000:00:0d.3: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.418683] pci 0000:00:12.0: [8086:a845] type 00 class 0x070000 conventional PCI endpoint
<6>[ 2.418741] pci 0000:00:12.0: BAR 0 [mem 0x3815330000-0x381533ffff 64bit]
<6>[ 2.418809] pci 0000:00:12.0: PME# supported from D0 D3hot
<6>[ 2.421286] pci 0000:00:13.0: [8086:a862] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.421375] pci 0000:00:13.0: BAR 0 [mem 0x381536f000-0x381536ffff 64bit]
<6>[ 2.421478] pci 0000:00:13.0: PME# supported from D3hot
<6>[ 2.421858] pci 0000:00:14.0: [8086:a87d] type 00 class 0x0c0330 conventional PCI endpoint
<6>[ 2.421911] pci 0000:00:14.0: BAR 0 [mem 0x3815320000-0x381532ffff 64bit]
<6>[ 2.421977] pci 0000:00:14.0: PME# supported from D3hot D3cold
<6>[ 2.423952] pci 0000:00:14.2: [8086:a87f] type 00 class 0x050000 conventional PCI endpoint
<6>[ 2.424014] pci 0000:00:14.2: BAR 0 [mem 0x3815360000-0x3815367fff 64bit]
<6>[ 2.424023] pci 0000:00:14.2: BAR 2 [mem 0x381536e000-0x381536efff 64bit]
<6>[ 2.424313] pci 0000:00:15.0: [8086:a878] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.424415] pci 0000:00:15.0: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.425778] pci 0000:00:15.1: [8086:a879] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.425887] pci 0000:00:15.1: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.427223] pci 0000:00:15.2: [8086:a87a] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.427333] pci 0000:00:15.2: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.428675] pci 0000:00:15.3: [8086:a87b] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.428773] pci 0000:00:15.3: BAR 0 [mem 0x00000000-0x00000fff 64bit]
<6>[ 2.430253] pci 0000:00:16.0: [8086:a870] type 00 class 0x078000 conventional PCI endpoint
<6>[ 2.430345] pci 0000:00:16.0: BAR 0 [mem 0x3815369000-0x3815369fff 64bit]
<6>[ 2.430446] pci 0000:00:16.0: PME# supported from D3hot
<6>[ 2.432790] pci 0000:00:1c.0: [8086:a839] type 01 class 0x060400 PCIe Root Port
<6>[ 2.432824] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.432832] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 2.432839] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 2.432961] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>[ 2.433017] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
<6>[ 2.437673] pci 0000:00:1c.4: [8086:a83c] type 01 class 0x060400 PCIe Root Port
<6>[ 2.437778] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.437809] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 2.438144] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
<6>[ 2.438306] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
<6>[ 2.443364] pci 0000:00:1f.0: [8086:a807] type 00 class 0x060100 conventional PCI endpoint
<6>[ 2.444750] pci 0000:00:1f.3: [8086:a828] type 00 class 0x040100 conventional PCI endpoint
<6>[ 2.444865] pci 0000:00:1f.3: BAR 0 [mem 0x3815200000-0x381527ffff 64bit]
<6>[ 2.444880] pci 0000:00:1f.3: BAR 4 [mem 0x3815000000-0x38151fffff 64bit]
<6>[ 2.444992] pci 0000:00:1f.3: PME# supported from D3hot D3cold
<6>[ 2.445380] pci 0000:00:1f.4: [8086:a822] type 00 class 0x0c0500 conventional PCI endpoint
<6>[ 2.445447] pci 0000:00:1f.4: BAR 0 [mem 0x3815368000-0x38153680ff 64bit]
<6>[ 2.445460] pci 0000:00:1f.4: BAR 4 [io 0xefa0-0xefbf]
<6>[ 2.446566] pci 0000:00:1f.5: [8086:a823] type 00 class 0x0c8000 conventional PCI endpoint
<6>[ 2.446748] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]
<6>[ 2.446969] pci 0000:00:1f.6: [8086:550f] type 00 class 0x020000 conventional PCI endpoint
<6>[ 2.447053] pci 0000:00:1f.6: BAR 0 [mem 0x94400000-0x9441ffff]
<6>[ 2.447141] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
<6>[ 2.448415] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 2.448583] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 2.448734] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 2.448912] pci 0000:7f:00.0: [10ec:8161] type 00 class 0x020000 PCIe Endpoint
<6>[ 2.448983] pci 0000:7f:00.0: BAR 0 [io 0x3000-0x30ff]
<6>[ 2.448993] pci 0000:7f:00.0: BAR 2 [mem 0x94304000-0x94304fff 64bit]
<6>[ 2.449002] pci 0000:7f:00.0: BAR 4 [mem 0x94300000-0x94303fff 64bit]
<6>[ 2.449166] pci 0000:7f:00.0: supports D1 D2
<6>[ 2.449170] pci 0000:7f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>[ 2.449721] pci 0000:00:1c.0: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.451268] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 2.451679] pci 0000:80:00.0: [15b7:5011] type 00 class 0x010802 PCIe Endpoint
<6>[ 2.451736] pci 0000:80:00.0: BAR 0 [mem 0x94200000-0x94203fff 64bit]
<6>[ 2.452829] pci 0000:00:1c.4: ASPM: current common clock configuration is inconsistent, reconfiguring
<6>[ 2.452888] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 2.823500] ACPI: \_SB_.PEPD: Duplicate LPS0 _DSM functions (mask: 0x1)
<6>[ 12.222806] Low-power S0 idle used by default for system suspend
<6>[ 12.274921] ACPI: EC: interrupt unblocked
<6>[ 12.274931] ACPI: EC: event unblocked
<6>[ 12.274959] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
<6>[ 12.274966] ACPI: EC: GPE=0x6e
<6>[ 12.274971] ACPI: \_SB_.PC00.LPCB.H_EC: Boot ECDT EC initialization complete
<6>[ 12.274980] ACPI: \_SB_.PC00.LPCB.H_EC: EC: Used to handle transactions and events
<6>[ 12.275368] iommu: Default domain type: Translated
<6>[ 12.275368] iommu: DMA domain TLB invalidation policy: lazy mode
<5>[ 12.278373] SCSI subsystem initialized
<7>[ 12.279077] libata version 3.00 loaded.
<6>[ 12.279350] ACPI: bus type USB registered
<6>[ 12.279350] usbcore: registered new interface driver usbfs
<6>[ 12.279350] usbcore: registered new interface driver hub
<6>[ 12.279350] usbcore: registered new device driver usb
<6>[ 12.279633] pps_core: LinuxPPS API ver. 1 registered
<6>[ 12.279645] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 12.279694] PTP clock support registered
<6>[ 12.281009] EDAC MC: Ver: 3.0.0
<6>[ 12.283229] efivars: Registered efivars operations
<6>[ 12.286445] NetLabel: Initializing
<6>[ 12.286445] NetLabel: domain hash size = 128
<6>[ 12.286445] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
<6>[ 12.286960] NetLabel: unlabeled traffic allowed by default
<6>[ 12.286960] mctp: management component transport protocol core
<6>[ 12.286960] NET: Registered PF_MCTP protocol family
<6>[ 12.286960] PCI: Using ACPI for IRQ routing
<7>[ 12.350315] PCI: pci_cache_line_size set to 64 bytes
<6>[ 12.350734] pci 0000:00:1f.5: BAR 0 [mem 0xfe010000-0xfe010fff]: can't claim; no compatible bridge window
<7>[ 12.350966] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
<7>[ 12.350985] e820: reserve RAM buffer [mem 0x68f52000-0x6bffffff]
<7>[ 12.350993] e820: reserve RAM buffer [mem 0x68f71000-0x6bffffff]
<7>[ 12.350999] e820: reserve RAM buffer [mem 0x6cac1000-0x6fffffff]
<7>[ 12.351005] e820: reserve RAM buffer [mem 0x87f800000-0x87fffffff]
<6>[ 12.352477] pci 0000:00:02.0: vgaarb: setting as boot VGA device
<6>[ 12.352477] pci 0000:00:02.0: vgaarb: bridge control possible
<6>[ 12.352477] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
<6>[ 12.352477] vgaarb: loaded
<6>[ 12.353305] clocksource: Switched to clocksource tsc-early
<5>[ 12.366297] VFS: Disk quotas dquot_6.6.0
<6>[ 12.366359] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
<6>[ 12.368540] AppArmor: AppArmor Filesystem Enabled
<6>[ 12.368938] pnp: PnP ACPI init
<6>[ 12.370991] system 00:00: [io 0x0680-0x069f] has been reserved
<6>[ 12.371018] system 00:00: [io 0x164e-0x164f] has been reserved
<6>[ 12.374562] system 00:02: [io 0x06a4] has been reserved
<6>[ 12.374586] system 00:02: [io 0x06a0] has been reserved
<6>[ 12.431793] system 00:03: [mem 0xfedc0000-0xfedc7fff] has been reserved
<6>[ 12.431821] system 00:03: [mem 0xd8000000-0xd8000fff] has been reserved
<6>[ 12.431852] system 00:03: [mem 0x00000000-0x00000fff] could not be reserved
<6>[ 12.431875] system 00:03: [mem 0xc0000000-0xcfffffff] has been reserved
<6>[ 12.431902] system 00:03: [mem 0xfed20000-0xfed7ffff] could not be reserved
<6>[ 12.431928] system 00:03: [mem 0xfc800000-0xfc81ffff] could not be reserved
<6>[ 12.431954] system 00:03: [mem 0xfed45000-0xfed8ffff] could not be reserved
<6>[ 12.431976] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
<6>[ 12.440515] system 00:04: [io 0x2000-0x20fe] has been reserved
<6>[ 12.447917] system 00:06: [io 0x1854-0x1857] has been reserved
<6>[ 12.448303] system 00:07: [mem 0x00000000-0x0009cfff] could not be reserved
<6>[ 12.461957] pnp: PnP ACPI: found 8 devices
<6>[ 12.479811] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
<6>[ 12.480182] NET: Registered PF_INET protocol family
<6>[ 12.480490] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.483684] tcp_listen_portaddr_hash hash table entries: 16384 (order: 8, 1179648 bytes, linear)
<6>[ 12.484080] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
<6>[ 12.484418] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
<6>[ 12.485651] TCP bind hash table entries: 65536 (order: 11, 9437184 bytes, vmalloc hugepage)
<6>[ 12.487806] TCP: Hash tables configured (established 262144 bind 65536)
<6>[ 12.488458] UDP hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.490112] UDP-Lite hash table entries: 16384 (order: 10, 4194304 bytes, linear)
<6>[ 12.491791] NET: Registered PF_UNIX/PF_LOCAL protocol family
<6>[ 12.491920] pci 0000:00:07.0: bridge window [io 0x1000-0x0fff] to [bus 01-2a] add_size 1000
<6>[ 12.491938] pci 0000:00:07.1: bridge window [io 0x1000-0x0fff] to [bus 2b-54] add_size 1000
<6>[ 12.491953] pci 0000:00:07.2: bridge window [io 0x1000-0x0fff] to [bus 55-7e] add_size 1000
<6>[ 12.492022] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]: assigned
<6>[ 12.492032] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]: assigned
<6>[ 12.492041] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]: assigned
<6>[ 12.492052] pci 0000:00:15.0: BAR 0 [mem 0x381536a000-0x381536afff 64bit]: assigned
<6>[ 12.492107] pci 0000:00:15.1: BAR 0 [mem 0x381536b000-0x381536bfff 64bit]: assigned
<6>[ 12.492158] pci 0000:00:15.2: BAR 0 [mem 0x381536c000-0x381536cfff 64bit]: assigned
<6>[ 12.492208] pci 0000:00:15.3: BAR 0 [mem 0x381536d000-0x381536dfff 64bit]: assigned
<6>[ 12.492258] pci 0000:00:1f.5: BAR 0 [mem 0x80800000-0x80800fff]: assigned
<6>[ 12.492301] pci 0000:00:07.0: PCI bridge to [bus 01-2a]
<6>[ 12.492315] pci 0000:00:07.0: bridge window [io 0x4000-0x4fff]
<6>[ 12.492327] pci 0000:00:07.0: bridge window [mem 0x8e000000-0x93ffffff]
<6>[ 12.492339] pci 0000:00:07.0: bridge window [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.492354] pci 0000:00:07.1: PCI bridge to [bus 2b-54]
<6>[ 12.492366] pci 0000:00:07.1: bridge window [io 0x5000-0x5fff]
<6>[ 12.492378] pci 0000:00:07.1: bridge window [mem 0x88000000-0x8dffffff]
<6>[ 12.492389] pci 0000:00:07.1: bridge window [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.492404] pci 0000:00:07.2: PCI bridge to [bus 55-7e]
<6>[ 12.492413] pci 0000:00:07.2: bridge window [io 0x6000-0x6fff]
<6>[ 12.492424] pci 0000:00:07.2: bridge window [mem 0x82000000-0x87ffffff]
<6>[ 12.492435] pci 0000:00:07.2: bridge window [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.492451] pci 0000:00:1c.0: PCI bridge to [bus 7f]
<6>[ 12.492459] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
<6>[ 12.492470] pci 0000:00:1c.0: bridge window [mem 0x94300000-0x943fffff]
<6>[ 12.492484] pci 0000:00:1c.4: PCI bridge to [bus 80]
<6>[ 12.492521] pci 0000:00:1c.4: bridge window [mem 0x94200000-0x942fffff]
<6>[ 12.492564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
<6>[ 12.492572] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
<6>[ 12.492580] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
<6>[ 12.492589] pci_bus 0000:00: resource 7 [mem 0x80800000-0xbfffffff window]
<6>[ 12.492598] pci_bus 0000:00: resource 8 [mem 0x2000000000-0x3fbfffffff window]
<6>[ 12.492608] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
<6>[ 12.492615] pci_bus 0000:01: resource 1 [mem 0x8e000000-0x93ffffff]
<6>[ 12.492623] pci_bus 0000:01: resource 2 [mem 0x2010000000-0x280fffffff 64bit pref]
<6>[ 12.492633] pci_bus 0000:2b: resource 0 [io 0x5000-0x5fff]
<6>[ 12.492640] pci_bus 0000:2b: resource 1 [mem 0x88000000-0x8dffffff]
<6>[ 12.492648] pci_bus 0000:2b: resource 2 [mem 0x2810000000-0x300fffffff 64bit pref]
<6>[ 12.492658] pci_bus 0000:55: resource 0 [io 0x6000-0x6fff]
<6>[ 12.492665] pci_bus 0000:55: resource 1 [mem 0x82000000-0x87ffffff]
<6>[ 12.492673] pci_bus 0000:55: resource 2 [mem 0x3010000000-0x380fffffff 64bit pref]
<6>[ 12.492683] pci_bus 0000:7f: resource 0 [io 0x3000-0x3fff]
<6>[ 12.492690] pci_bus 0000:7f: resource 1 [mem 0x94300000-0x943fffff]
<6>[ 12.492698] pci_bus 0000:80: resource 1 [mem 0x94200000-0x942fffff]
<6>[ 12.494173] pci 0000:00:0d.0: enabling device (0000 -> 0002)
<6>[ 12.496364] PCI: CLS 0 bytes, default 64
<6>[ 12.496503] DMAR: No RMRR found
<6>[ 12.496518] DMAR: No ATSR found
<6>[ 12.496524] DMAR: dmar1: Using Queued invalidation
<6>[ 12.496552] DMAR: dmar0: Using Queued invalidation
<6>[ 12.496563] DMAR: dmar2: Using Queued invalidation
<6>[ 12.497693] pci 0000:00:04.0: Adding to iommu group 0
<6>[ 12.497799] pci 0000:00:05.0: Adding to iommu group 1
<6>[ 12.497888] pci 0000:00:0a.0: Adding to iommu group 2
<6>[ 12.497965] pci 0000:00:0b.0: Adding to iommu group 3
<6>[ 12.502108] pci 0000:00:02.0: Adding to iommu group 4
<6>[ 12.503502] pci 0000:00:00.0: Adding to iommu group 5
<6>[ 12.503590] pci 0000:00:07.0: Adding to iommu group 6
<6>[ 12.503676] pci 0000:00:07.1: Adding to iommu group 7
<6>[ 12.503772] pci 0000:00:07.2: Adding to iommu group 8
<6>[ 12.503882] pci 0000:00:0d.0: Adding to iommu group 9
<6>[ 12.503942] pci 0000:00:0d.2: Adding to iommu group 9
<6>[ 12.503992] pci 0000:00:0d.3: Adding to iommu group 9
<6>[ 12.504072] pci 0000:00:12.0: Adding to iommu group 10
<6>[ 12.504149] pci 0000:00:13.0: Adding to iommu group 11
<6>[ 12.504239] pci 0000:00:14.0: Adding to iommu group 12
<6>[ 12.504292] pci 0000:00:14.2: Adding to iommu group 12
<6>[ 12.504404] pci 0000:00:15.0: Adding to iommu group 13
<6>[ 12.504458] pci 0000:00:15.1: Adding to iommu group 13
<6>[ 12.504512] pci 0000:00:15.2: Adding to iommu group 13
<6>[ 12.504567] pci 0000:00:15.3: Adding to iommu group 13
<6>[ 12.504652] pci 0000:00:16.0: Adding to iommu group 14
<6>[ 12.504727] pci 0000:00:1c.0: Adding to iommu group 15
<6>[ 12.504821] pci 0000:00:1c.4: Adding to iommu group 16
<6>[ 12.504941] pci 0000:00:1f.0: Adding to iommu group 17
<6>[ 12.504995] pci 0000:00:1f.3: Adding to iommu group 17
<6>[ 12.505048] pci 0000:00:1f.4: Adding to iommu group 17
<6>[ 12.505107] pci 0000:00:1f.5: Adding to iommu group 17
<6>[ 12.505160] pci 0000:00:1f.6: Adding to iommu group 17
<6>[ 12.505234] pci 0000:7f:00.0: Adding to iommu group 18
<6>[ 12.505331] pci 0000:80:00.0: Adding to iommu group 19
<6>[ 12.518310] DMAR: Intel(R) Virtualization Technology for Directed I/O
<6>[ 12.518331] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
<6>[ 12.518340] software IO TLB: mapped [mem 0x0000000063ac2000-0x0000000067ac2000] (64MB)
<6>[ 12.524860] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2cd5a8bb032, max_idle_ns: 440795365915 ns
<6>[ 12.524923] clocksource: Switched to clocksource tsc
<6>[ 12.525087] platform rtc_cmos: registered platform RTC device (no PNP device found)
<5>[ 12.530263] Initialise system trusted keyrings
<5>[ 12.530363] Key type blacklist registered
<6>[ 12.530742] workingset: timestamp_bits=36 max_order=23 bucket_order=0
<6>[ 12.541137] zbud: loaded
<6>[ 12.542551] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 12.542691] ntfs3: Enabled Linux POSIX ACLs support
<6>[ 12.542699] ntfs3: Read-only LZX/Xpress compression included
<5>[ 12.543224] integrity: Platform Keyring initialized
<5>[ 12.543252] integrity: Machine keyring initialized
<6>[ 12.549583] xor: automatically using best checksumming function avx
<5>[ 12.549595] Key type asymmetric registered
<5>[ 12.549608] Asymmetric key parser 'x509' registered
<6>[ 12.549761] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
<6>[ 12.550263] io scheduler mq-deadline registered
<6>[ 12.551361] ledtrig-cpu: registered to indicate activity on CPUs
<6>[ 12.553079] pcieport 0000:00:07.0: PME: Signaling with IRQ 126
<6>[ 12.553638] pcieport 0000:00:07.0: AER: enabled with IRQ 126
<6>[ 12.554886] pcieport 0000:00:07.1: PME: Signaling with IRQ 127
<6>[ 12.555357] pcieport 0000:00:07.1: AER: enabled with IRQ 127
<6>[ 12.556565] pcieport 0000:00:07.2: PME: Signaling with IRQ 128
<6>[ 12.557090] pcieport 0000:00:07.2: AER: enabled with IRQ 128
<6>[ 12.558196] pcieport 0000:00:1c.0: PME: Signaling with IRQ 129
<6>[ 12.558684] pcieport 0000:00:1c.0: AER: enabled with IRQ 129
<6>[ 12.560179] pcieport 0000:00:1c.4: PME: Signaling with IRQ 130
<6>[ 12.560805] pcieport 0000:00:1c.4: AER: enabled with IRQ 130
<6>[ 12.561420] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
<7>[ 12.564445] Monitor-Mwait will be used to enter C-1 state
<7>[ 12.564591] Monitor-Mwait will be used to enter C-2 state
<7>[ 12.564642] Monitor-Mwait will be used to enter C-3 state
<6>[ 12.572499] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/PNP0C09:00/PNP0C0D:00/input/input0
<6>[ 12.572697] ACPI: button: Lid Switch [LID0]
<6>[ 12.572998] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
<6>[ 12.573157] ACPI: button: Sleep Button [SLPB]
<6>[ 12.573364] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
<6>[ 12.573936] ACPI: button: Power Button [PWRB]
<6>[ 12.757446] thermal LNXTHERM:00: registered as thermal_zone0
<6>[ 12.757471] ACPI: thermal: Thermal Zone [TZ00] (55 C)
<6>[ 12.760108] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
<6>[ 12.761738] ACPI: battery: Slot [BAT1] (battery absent)
<6>[ 12.762946] ACPI: battery: Slot [BAT0] (battery present)
<6>[ 12.785509] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
<6>[ 12.823622] serial 0000:00:12.0: enabling device (0000 -> 0002)
<4>[ 12.829195] hpet_acpi_add: no address or irqs in _CRS
<6>[ 12.829387] Linux agpgart interface v0.103
<6>[ 12.872898] ACPI: bus type drm_connector registered
<6>[ 12.916644] loop: module loaded
<6>[ 12.988785] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
<6>[ 13.150838] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
<6>[ 13.314096] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
<6>[ 13.531793] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
<5>[ 13.716555] Key type psk registered
<6>[ 13.724460] nvme 0000:80:00.0: platform quirk: setting simple suspend
<6>[ 13.725340] tun: Universal TUN/TAP device driver, 1.6
<6>[ 13.725543] nvme nvme0: pci function 0000:80:00.0
<6>[ 13.726608] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.726825] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 1
<6>[ 13.729403] xhci_hcd 0000:00:0d.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.732800] xhci_hcd 0000:00:0d.0: xHCI Host Controller
<6>[ 13.732841] xhci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
<6>[ 13.732873] xhci_hcd 0000:00:0d.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.733558] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.733595] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.733615] usb usb1: Product: xHCI Host Controller
<6>[ 13.733628] usb usb1: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.733643] usb usb1: SerialNumber: 0000:00:0d.0
<6>[ 13.735639] hub 1-0:1.0: USB hub found
<6>[ 13.735784] hub 1-0:1.0: 1 port detected
<6>[ 13.742414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.742440] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.742458] usb usb2: Product: xHCI Host Controller
<6>[ 13.742471] usb usb2: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.742486] usb usb2: SerialNumber: 0000:00:0d.0
<6>[ 13.744264] hub 2-0:1.0: USB hub found
<6>[ 13.744355] hub 2-0:1.0: 3 ports detected
<6>[ 13.763901] nvme nvme0: 8/0/0 default/read/poll queues
<6>[ 13.788909] nvme0n1: p1 p2
<6>[ 13.792696] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.793008] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
<6>[ 13.795375] xhci_hcd 0000:00:14.0: hcc params 0x20007fc1 hci version 0x120 quirks 0x0000000200009810
<6>[ 13.798537] xhci_hcd 0000:00:14.0: xHCI Host Controller
<6>[ 13.798573] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
<6>[ 13.798610] xhci_hcd 0000:00:14.0: Host supports USB 3.2 Enhanced SuperSpeed
<6>[ 13.798952] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.14
<6>[ 13.798974] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.798991] usb usb3: Product: xHCI Host Controller
<6>[ 13.799004] usb usb3: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.799018] usb usb3: SerialNumber: 0000:00:14.0
<6>[ 13.800549] hub 3-0:1.0: USB hub found
<6>[ 13.800640] hub 3-0:1.0: 8 ports detected
<6>[ 13.828217] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.14
<6>[ 13.828227] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 13.828233] usb usb4: Product: xHCI Host Controller
<6>[ 13.828237] usb usb4: Manufacturer: Linux 6.14.0-rc6-xe+ xhci-hcd
<6>[ 13.828242] usb usb4: SerialNumber: 0000:00:14.0
<6>[ 13.829137] hub 4-0:1.0: USB hub found
<6>[ 13.829171] hub 4-0:1.0: 2 ports detected
<6>[ 13.833613] usbcore: registered new interface driver usb-storage
<6>[ 13.833698] usbcore: registered new interface driver usbserial_generic
<6>[ 13.833753] usbserial: USB Serial support registered for generic
<6>[ 13.833784] usbcore: registered new interface driver ftdi_sio
<6>[ 13.833805] usbserial: USB Serial support registered for FTDI USB Serial Device
<6>[ 13.833836] usbcore: registered new interface driver pl2303
<6>[ 13.833861] usbserial: USB Serial support registered for pl2303
<6>[ 13.833937] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>[ 13.833943] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<3>[ 14.546259] i8042: Can't read CTR while initializing i8042
<3>[ 14.546266] i8042 i8042: probe with driver i8042 failed with error -5
<6>[ 14.548310] mousedev: PS/2 mouse device common for all mice
<6>[ 14.550210] rtc_cmos rtc_cmos: RTC can wake from S4
<6>[ 14.553404] rtc_cmos rtc_cmos: registered as rtc0
<6>[ 14.553682] rtc_cmos rtc_cmos: setting system clock to 2025-03-14T08:06:01 UTC (1741939561)
<6>[ 14.554011] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
<6>[ 14.554110] i2c_dev: i2c /dev entries driver
<6>[ 14.561321] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=5 (nowayout=0)
<6>[ 14.561348] softdog: soft_reboot_cmd=<not set> soft_active_on_boot=0
<4>[ 14.561367] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
<6>[ 14.561427] device-mapper: uevent: version 1.0.3
<6>[ 14.561906] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
<6>[ 14.562126] platform eisa.0: Probing EISA bus 0
<4>[ 14.562152] platform eisa.0: EISA: Cannot allocate resource for mainboard
<4>[ 14.562178] platform eisa.0: Cannot allocate resource for EISA slot 1
<4>[ 14.562202] platform eisa.0: Cannot allocate resource for EISA slot 2
<4>[ 14.562223] platform eisa.0: Cannot allocate resource for EISA slot 3
<4>[ 14.562245] platform eisa.0: Cannot allocate resource for EISA slot 4
<4>[ 14.562266] platform eisa.0: Cannot allocate resource for EISA slot 5
<4>[ 14.562286] platform eisa.0: Cannot allocate resource for EISA slot 6
<4>[ 14.562309] platform eisa.0: Cannot allocate resource for EISA slot 7
<4>[ 14.562330] platform eisa.0: Cannot allocate resource for EISA slot 8
<6>[ 14.562347] platform eisa.0: EISA: Detected 0 cards
<6>[ 14.562363] intel_pstate: Intel P-state driver initializing
<6>[ 14.565217] Hybrid CPU capacity scaling enabled
<6>[ 14.566498] intel_pstate: HWP enabled
<6>[ 14.566504] sdhci: Secure Digital Host Controller Interface driver
<6>[ 14.566510] sdhci: Copyright(c) Pierre Ossman
<6>[ 14.566620] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 14.569053] Relocating firmware framebuffer to offset 0x0000000000800000[d] within [mem 0x2000000000-0x200fffffff flags 0x14220c]
<6>[ 14.569790] drop_monitor: Initializing network drop monitor service
<6>[ 14.569987] NET: Registered PF_INET6 protocol family
<6>[ 14.572425] Segment Routing with IPv6
<6>[ 14.572461] In-situ OAM (IOAM) with IPv6
<6>[ 14.572508] NET: Registered PF_PACKET protocol family
<5>[ 14.572693] Key type dns_resolver registered
<4>[ 14.576278] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
<6>[ 14.576825] microcode: Current revision: 0x0000011c
<6>[ 14.577612] IPI shorthand broadcast: enabled
<6>[ 14.587745] sched_clock: Marking stable (14578002593, 9712046)->(14657490561, -69775922)
<6>[ 14.588547] registered taskstats version 1
<5>[ 14.589718] Loading compiled-in X.509 certificates
<6>[ 14.617104] Demotion targets for Node 0: null
<6>[ 14.617390] kmemleak: Kernel memory leak detector initialized (mem pool available: 14949)
<6>[ 14.617395] kmemleak: Automatic memory scanning thread started
<5>[ 14.617574] Key type .fscrypt registered
<5>[ 14.617579] Key type fscrypt-provisioning registered
<6>[ 14.620179] Btrfs loaded, zoned=yes, fsverity=yes
<5>[ 14.620299] Key type trusted registered
<5>[ 14.623139] Key type encrypted registered
<6>[ 14.623147] AppArmor: AppArmor sha256 policy hashing enabled
<5>[ 14.623262] Loading compiled-in module X.509 certificates
<5>[ 14.623843] Loaded X.509 cert 'Build time autogenerated kernel key: 92d3685cd497c839ab566243307548c87338c73e'
<6>[ 14.623856] ima: Allocated hash algorithm: sha256
<6>[ 14.641797] ima: No architecture policies found
<6>[ 14.641935] evm: Initialising EVM extended attributes:
<6>[ 14.641941] evm: security.selinux
<6>[ 14.641945] evm: security.SMACK64
<6>[ 14.641949] evm: security.SMACK64EXEC
<6>[ 14.641953] evm: security.SMACK64TRANSMUTE
<6>[ 14.641958] evm: security.SMACK64MMAP
<6>[ 14.641962] evm: security.apparmor
<6>[ 14.641966] evm: security.ima
<6>[ 14.641969] evm: security.capability
<6>[ 14.641973] evm: HMAC attrs: 0x1
<6>[ 14.644314] PM: Magic number: 1:393:68
<6>[ 14.644432] memory memory229: hash matches
<6>[ 14.644468] memory memory96: hash matches
<6>[ 14.644564] printk: legacy console [netcon0] enabled
<6>[ 14.644571] netconsole: network logging started
<6>[ 14.645151] RAS: Correctable Errors collector initialized.
<6>[ 14.645288] clk: Disabling unused clocks
<6>[ 14.645298] PM: genpd: Disabling unused power domains
<6>[ 14.646129] md: Waiting for all devices to be available before autodetect
<6>[ 14.646137] md: If you don't use raid, use raid=noautodetect
<6>[ 14.646143] md: Autodetecting RAID arrays.
<6>[ 14.646151] md: autorun ...
<6>[ 14.646155] md: ... autorun DONE.
<6>[ 14.687198] EXT4-fs (nvme0n1p2): mounted filesystem e14561b2-a821-43fb-816a-3be81f76b65f ro with ordered data mode. Quota mode: none.
<6>[ 14.687264] VFS: Mounted root (ext4 filesystem) readonly on device 259:2.
<6>[ 14.688203] devtmpfs: mounted
<6>[ 14.699290] Freeing unused decrypted memory: 2028K
<6>[ 14.700218] Freeing unused kernel image (initmem) memory: 5624K
<6>[ 14.700240] Write protecting the kernel read-only data: 34816k
<6>[ 14.700625] Freeing unused kernel image (text/rodata gap) memory: 280K
<6>[ 14.700906] Freeing unused kernel image (rodata/data gap) memory: 964K
<6>[ 14.705425] x86/mm: Checked W+X mappings: passed, no W+X pages found.
<6>[ 14.705447] Run /sbin/init as init process
<7>[ 14.705452] with arguments:
<7>[ 14.705452] /sbin/init
<7>[ 14.705453] with environment:
<7>[ 14.705454] HOME=/
<7>[ 14.705455] TERM=linux
<7>[ 14.705455] BOOT_IMAGE=/boot/drm_intel
<7>[ 14.749812] systemd[1]: Inserted module 'autofs4'
<7>[ 14.767700] systemd[1]: systemd 255.4-1ubuntu8.5 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
<7>[ 14.767824] systemd[1]: Detected architecture x86-64.
<7>[ 14.769938] systemd[1]: Hostname set to <shard-lnl-5>.
<7>[ 15.006453] systemd[1]: Queued start job for default target graphical.target.
<7>[ 15.041447] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
<7>[ 15.043111] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
<7>[ 15.044306] systemd[1]: Created slice user.slice - User and Session Slice.
<7>[ 15.044540] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
<7>[ 15.045137] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
<7>[ 15.045243] systemd[1]: Expecting device dev-disk-by\x2duuid-BBA4\x2d5DAC.device - /dev/disk/by-uuid/BBA4-5DAC...
<7>[ 15.045323] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
<7>[ 15.045400] systemd[1]: Reached target slices.target - Slice Units.
<7>[ 15.045463] systemd[1]: Reached target snapd.mounts-pre.target - Mounting snaps.
<7>[ 15.045524] systemd[1]: Reached target snapd.mounts.target - Mounted snaps.
<7>[ 15.045589] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
<7>[ 15.045840] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
<7>[ 15.046234] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
<7>[ 15.046518] systemd[1]: Listening on multipathd.socket - multipathd control socket.
<7>[ 15.046830] systemd[1]: Listening on syslog.socket - Syslog Socket.
<7>[ 15.047075] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
<7>[ 15.047259] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
<7>[ 15.047525] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
<7>[ 15.047909] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
<7>[ 15.048178] systemd[1]: Listening on systemd-networkd.socket - Network Service Netlink Socket.
<7>[ 15.048350] systemd[1]: systemd-pcrextend.socket - TPM2 PCR Extension (Varlink) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.048609] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
<7>[ 15.048867] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
<7>[ 15.051946] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
<7>[ 15.054295] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
<7>[ 15.056958] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
<7>[ 15.059506] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
<7>[ 15.065002] systemd[1]: Starting systemd-journald.service - Journal Service...
<7>[ 15.068298] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
<7>[ 15.071874] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
<7>[ 15.075517] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
<7>[ 15.078367] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
<7>[ 15.081028] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
<7>[ 15.083890] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
<7>[ 15.087381] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
<7>[ 15.093099] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
<7>[ 15.095507] systemd-journald[213]: Collecting audit messages is disabled.
<7>[ 15.097335] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
<6>[ 15.110428] pstore: Using crash dump compression: deflate
<6>[ 15.111845] pstore: Registered efi_pstore as persistent store backend
<7>[ 15.115478] systemd[1]: Starting modprobe@nvme_fabrics.service - Load Kernel Module nvme_fabrics...
<7>[ 15.115609] systemd[1]: netplan-ovs-cleanup.service - OpenVSwitch configuration for cleanup was skipped because of an unmet condition check (ConditionFileIsExecutable=/usr/bin/ovs-vsctl).
<6>[ 15.115855] fuse: init (API version 7.42)
<7>[ 15.120015] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
<7>[ 15.123959] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
<7>[ 15.124045] systemd[1]: systemd-pcrmachine.service - TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.124109] systemd[1]: systemd-tpm2-setup-early.service - TPM2 SRK Setup (Early) was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
<7>[ 15.127454] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
<7>[ 15.132639] systemd[1]: Started systemd-journald.service - Journal Service.
<6>[ 15.287352] EXT4-fs (nvme0n1p2): re-mounted e14561b2-a821-43fb-816a-3be81f76b65f r/w. Quota mode: none.
<6>[ 15.320394] Adding 8388604k swap on /swap.img. Priority:-2 extents:66 across:411435008k SS
<7>[ 15.340135] systemd-journald[213]: Received client request to flush runtime journal.
<7>[ 15.356981] systemd-journald[213]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/system.journal: Journal file uses a different sequence number ID, rotating.
<7>[ 15.356998] systemd-journald[213]: Rotating system journal.
<4>[ 15.983149] nvme nvme0: using unchecked data buffer
<6>[ 16.146048] intel_vsec 0000:00:0a.0: enabling device (0000 -> 0002)
<4>[ 16.147891] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.147915] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.147940] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.147964] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.147989] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148014] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148038] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148063] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148087] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148112] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148137] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148161] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148186] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148210] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148235] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148260] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148284] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148321] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148345] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148369] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148394] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148419] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148443] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148468] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148492] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148529] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148553] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148624] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148637] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148649] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148662] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148674] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148710] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148736] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148753] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148778] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148803] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.148827] gpio gpiochip0: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.173692] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.173720] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.173741] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.173766] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.173790] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.173815] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.173851] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.173875] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174017] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174072] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174104] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174143] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174239] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174264] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174288] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174324] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174360] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174385] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174409] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174434] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174459] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174483] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174508] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174532] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174557] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174582] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174606] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174631] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174655] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.174680] gpio gpiochip1: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.200709] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.200880] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.200900] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.200920] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.200940] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.200960] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.200980] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201097] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201116] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201136] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201156] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201176] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201196] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201216] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201236] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201256] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201276] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201296] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201364] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201384] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201404] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201424] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201504] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201524] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201544] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201600] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201620] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201640] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201660] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201692] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201722] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201740] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201760] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201780] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201800] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201820] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201840] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201860] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.201880] gpio gpiochip2: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.212193] input: Intel HID events as /devices/platform/INTC107B:00/input/input3
<6>[ 16.221813] intel-hid INTC107B:00: platform supports 5 button array
<4>[ 16.227801] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.227825] gpio gpiochip3: gpiochip_add_data_with_key: get_direction failed: -22
<6>[ 16.232790] input: Intel HID 5 button array as /devices/platform/INTC107B:00/input/input4
<6>[ 16.245823] pci 0000:00:05.0: Setting to D3hot
<6>[ 16.257770] pci 0000:00:0b.0: Setting to D3hot
<4>[ 16.270175] intel_pmc_core INT33A1:00: Assuming a default substate order for this platform
<6>[ 16.270340] intel_pmc_core INT33A1:00: initialized
<4>[ 16.271506] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271534] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271554] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271574] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271594] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271614] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271634] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271653] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271673] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271743] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271763] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271813] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271834] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271878] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271898] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271918] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271938] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.271984] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272006] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272026] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272046] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272067] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272088] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272107] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272127] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272161] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272188] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272209] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272229] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272252] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272272] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272294] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272317] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272338] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272357] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272377] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272397] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272417] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272437] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272457] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272477] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272497] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272517] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272536] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<4>[ 16.272556] gpio gpiochip4: gpiochip_add_data_with_key: get_direction failed: -22
<5>[ 16.353075] audit: type=1400 audit(1741939563.298:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=429 comm="apparmor_parser"
<5>[ 16.353466] audit: type=1400 audit(1741939563.298:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=430 comm="apparmor_parser"
<5>[ 16.354652] audit: type=1400 audit(1741939563.299:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=431 comm="apparmor_parser"
<5>[ 16.355955] audit: type=1400 audit(1741939563.301:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=432 comm="apparmor_parser"
<5>[ 16.358443] audit: type=1400 audit(1741939563.303:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=433 comm="apparmor_parser"
<5>[ 16.359675] audit: type=1400 audit(1741939563.304:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=434 comm="apparmor_parser"
<5>[ 16.360690] audit: type=1400 audit(1741939563.305:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=435 comm="apparmor_parser"
<5>[ 16.363237] audit: type=1400 audit(1741939563.308:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=436 comm="apparmor_parser"
<5>[ 16.365439] audit: type=1400 audit(1741939563.310:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=437 comm="apparmor_parser"
<5>[ 16.369010] audit: type=1400 audit(1741939563.314:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=438 comm="apparmor_parser"
<3>[ 16.381054] int3472-tps68470 i2c-INT3472:06: TPS68470 init error -121
<3>[ 16.443596] int3472-tps68470 i2c-INT3472:06: probe with driver int3472-tps68470 failed with error -121
<6>[ 16.701854] ACPI: bus type thunderbolt registered
<6>[ 16.737609] idma64 idma64.0: Found Intel integrated DMA 64-bit
<6>[ 16.739731] idma64 idma64.1: Found Intel integrated DMA 64-bit
<6>[ 16.751583] e1000e: Intel(R) PRO/1000 Network Driver
<6>[ 16.751588] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 16.751676] e1000e 0000:00:1f.6: enabling device (0000 -> 0002)
<6>[ 16.754635] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
<6>[ 16.759385] r8169 0000:7f:00.0: enabling device (0000 -> 0003)
<6>[ 16.762579] idma64 idma64.2: Found Intel integrated DMA 64-bit
<6>[ 16.783557] intel_vpu 0000:00:0b.0: enabling device (0000 -> 0002)
<6>[ 16.788941] idma64 idma64.3: Found Intel integrated DMA 64-bit
<6>[ 16.800526] intel_vpu 0000:00:0b.0: [drm] Firmware: intel/vpu/vpu_40xx_v0.0.bin, version: Jun 11 2024*LNL*ci_tag_ud202424_vpu_rc_20240611_0003*f3e8a8f27471d4127d8d92a8dc679b861ef43e43
<6>[ 16.800534] intel_vpu 0000:00:0b.0: [drm] Scheduler mode: OS
<6>[ 16.818030] proc_thermal_pci 0000:00:04.0: enabling device (0400 -> 0402)
<6>[ 16.818325] intel_rapl_common: Found RAPL domain package
<6>[ 16.818329] intel_rapl_common: Found RAPL domain dram
<6>[ 16.913257] r8169 0000:7f:00.0 eth0: RTL8168h/8111h, 50:91:e3:c8:f7:85, XID 541, IRQ 175
<6>[ 16.913267] r8169 0000:7f:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
<6>[ 16.928418] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
<6>[ 16.928422] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
<6>[ 16.928424] RAPL PMU: hw unit of domain package 2^-14 Joules
<6>[ 16.928425] RAPL PMU: hw unit of domain dram 2^-14 Joules
<6>[ 16.928426] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
<6>[ 16.928427] RAPL PMU: hw unit of domain psys 2^-14 Joules
<6>[ 16.939016] [drm] Initialized intel_vpu 1.0.0 for 0000:00:0b.0 on minor 0
<6>[ 16.945076] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
<6>[ 16.959383] cryptd: max_cpu_qlen set to 1000
<6>[ 16.979866] proc_thermal_pci 0000:00:04.0: msi enabled:1 msix enabled:0
<6>[ 17.015682] AES CTR mode by8 optimization enabled
<4>[ 17.146652] block nvme0n1: No UUID available providing old NGUID
<6>[ 17.174852] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
<6>[ 17.254794] e1000e 0000:00:1f.6 eth1: (PCI Express:2.5GT/s:Width x1) 90:49:fa:0a:35:90
<6>[ 17.254804] e1000e 0000:00:1f.6 eth1: Intel(R) PRO/1000 Network Connection
<6>[ 17.254998] e1000e 0000:00:1f.6 eth1: MAC: 16, PHY: 12, PBA No: FFFFFF-0FF
<6>[ 17.423544] intel_ish_ipc 0000:00:12.0: ISH loader: load firmware: intel/ish/ish_lnlm.bin
<6>[ 17.450444] intel_ish_ipc 0000:00:12.0: ISH loader: firmware loaded. size:997888
<6>[ 17.450451] intel_ish_ipc 0000:00:12.0: ISH loader: FW base version: 5.8.0.7716
<6>[ 17.450453] intel_ish_ipc 0000:00:12.0: ISH loader: FW project version: 5.8.0.12472
<6>[ 17.469213] evm: overlay not supported
<6>[ 17.650558] intel_rapl_common: Found RAPL domain package
<6>[ 17.650564] intel_rapl_common: Found RAPL domain core
<6>[ 17.650566] intel_rapl_common: Found RAPL domain uncore
<6>[ 17.650569] intel_rapl_common: Found RAPL domain dram
<6>[ 17.650570] intel_rapl_common: Found RAPL domain psys
<6>[ 17.651980] loop0: detected capacity change from 0 to 8
<6>[ 17.821950] r8169 0000:7f:00.0 enp127s0: renamed from eth0
<6>[ 17.838662] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth1
<4>[ 17.841623] spi-nor spi0.0: supply vcc not found, using dummy regulator
<5>[ 17.920313] Creating 1 MTD partitions on "0000:00:1f.5":
<5>[ 17.920340] 0x000000000000-0x000002000000 : "BIOS"
<6>[ 18.093845] Consider using thermal netlink events interface
<6>[ 18.171823] Generic FE-GE Realtek PHY r8169-0-7f00:00: attached PHY driver (mii_bus:phy_addr=r8169-0-7f00:00, irq=MAC)
<6>[ 18.330066] r8169 0000:7f:00.0 enp127s0: Link is Down
<6>[ 18.453541] hid: raw HID events driver (C) Jiri Kosina
<6>[ 18.459568] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
<6>[ 18.495210] hid-generic 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.498453] hid-generic 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.499949] hid-generic 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.500603] hid-generic 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.501802] hid-generic 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.502401] hid-generic 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.506566] hid-sensor-hub 001F:8087:0AC2.0001: hidraw0: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.509263] hid-sensor-hub 001F:8087:0AC2.0002: hidraw1: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.512055] hid-sensor-hub 001F:8087:0AC2.0003: hidraw2: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.514512] hid-sensor-hub 001F:8087:0AC2.0004: hidraw3: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC2] on
<6>[ 18.516355] hid-sensor-hub 001F:8087:0AC3.0005: hidraw4: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 18.518418] hid-sensor-hub 001F:8087:0AC3.0006: hidraw5: SENSOR HUB HID v2.00 Device [hid-ishtp 8087:0AC3] on
<6>[ 19.487312] typec port0: bound usb3-port1 (ops connector_ops)
<6>[ 19.487350] typec port0: bound usb2-port1 (ops connector_ops)
<6>[ 20.482630] typec port1: bound usb3-port2 (ops connector_ops)
<6>[ 20.482670] typec port1: bound usb2-port2 (ops connector_ops)
<6>[ 21.897240] r8169 0000:7f:00.0 enp127s0: Link is Up - 1Gbps/Full - flow control off
<7>[ 28.156526] systemd-journald[213]: /var/log/journal/50de536483fd4db8b6bcf2f985230a3b/user-1000.journal: Journal file uses a different sequence number ID, rotating.
<4>[ 28.778552] pci 0000:00:1f.3: deferred probe pending: snd_hda_intel: couldn't bind with audio component
<7>[ 50.280478] [IGT] xe_module_load: executing
<7>[ 50.289257] [IGT] xe_module_load: starting subtest load
<5>[ 50.480154] Setting dangerous option force_probe - tainting kernel
<6>[ 50.483071] xe 0000:00:02.0: vgaarb: deactivate vga console
<6>[ 50.484837] xe 0000:00:02.0: [drm] Found lunarlake (device ID 64a0) integrated display version 20.00 stepping B0
<7>[ 50.484848] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] LUNARLAKE 64a0:0004 dgfx:0 gfx:Xe2_LPG (20.04) media:Xe2_LPM (20.00) display:yes dma_m_s:46 tc:1 gscfi:0 cscfi:0
<7>[ 50.484956] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] Stepping = (G:B0, M:B0, B:**)
<7>[ 50.485035] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] SR-IOV support: no (mode: none)
<6>[ 50.489079] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 50.493194] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 50.493293] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000000
<7>[ 50.493371] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000000
<7>[ 50.493442] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 50.493512] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 50.493579] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 50.493643] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 50.493707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 50.493825] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 50.493891] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 50.493955] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 50.494018] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 50.494078] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 50.494139] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 50.494201] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.494319] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [6144K, 832K)
<7>[ 50.495496] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 50.495604] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 50.504791] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.505935] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 50.506099] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT safe-mode enabled
<7>[ 50.506296] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,0000007f
<7>[ 50.506477] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,0000007f
<7>[ 50.506628] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 000000ff
<7>[ 50.506797] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.506942] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,000000ff
<6>[ 50.507941] xe 0000:00:02.0: [drm] Using GuC firmware from xe/lnl_guc_70.bin version 70.40.2
<7>[ 50.512478] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 50.512635] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 50.512792] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000000
<7>[ 50.512921] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 50.513047] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 50.513166] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 50.513304] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 50.513449] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 50.513568] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 50.513700] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 50.513857] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 50.513971] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 50.514086] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 50.514199] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<6>[ 50.516300] xe 0000:00:02.0: [drm] Using HuC firmware from xe/lnl_huc.bin version 9.4.13
<6>[ 50.519748] xe 0000:00:02.0: [drm] Using GSC firmware from xe/lnl_gsc_1.bin version 104.0.0.1345
<6>[ 50.520846] mei_gsc_proxy 0000:00:16.0-0f73db04-97ab-4125-b893-e904ad0d5464: bound 0000:00:02.0 (ops xe_gsc_proxy_component_ops [xe])
<7>[ 50.520985] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] WOPCM: 2048K
<7>[ 50.521158] xe 0000:00:02.0: [drm:xe_wopcm_init [xe]] GuC WOPCM is already locked [5136K, 832K)
<7>[ 50.522943] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 50.523109] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 50.543066] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.543585] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 50.543859] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT safe-mode enabled
<7>[ 50.544087] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (geometry): 00000000,00000000,00000000
<7>[ 50.544299] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology dss mask (compute): 00000000,00000000,00000000
<7>[ 50.544497] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU mask per DSS: 00000000
<7>[ 50.544688] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology EU type: simd16
<7>[ 50.544917] xe 0000:00:02.0: [drm:xe_gt_topology_init [xe]] GT topology L3 bank mask: 00000000,0000000f
<7>[ 50.545644] xe 0000:00:02.0: [drm:xe_ttm_stolen_mgr_init [xe]] Initialized stolen memory support with 58720256 bytes
<7>[ 50.546038] xe 0000:00:02.0: [drm:intel_dmc_wl_init [xe]] Sanitized enable_dmc_wl value: 0 (disabled)
<7>[ 50.546373] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] graphic opregion physical addr: 0x6feec018
<7>[ 50.546734] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ACPI OpRegion version 3.2.0
<7>[ 50.547047] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Public ACPI methods supported
<7>[ 50.547315] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE supported
<7>[ 50.547582] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] ASLE extension supported
<7>[ 50.547861] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Mailbox #2 for backlight present
<7>[ 50.548209] xe 0000:00:02.0: [drm:intel_opregion_setup [xe]] Found valid VBT in ACPI OpRegion (RVDA)
<7>[ 50.548455] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Num qgv points 4
<7>[ 50.548773] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] DRAM channels: 8
<7>[ 50.549062] xe 0000:00:02.0: [drm:intel_dram_detect [xe]] Watermark level 0 adjustment needed: yes
<7>[ 50.549354] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 0: DCLK=2400 tRP=48 tRDPRE=40 tRAS=104 tRCD=48 tRC=152
<7>[ 50.549661] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 1: DCLK=4800 tRP=88 tRDPRE=72 tRAS=208 tRCD=88 tRC=296
<7>[ 50.549974] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 2: DCLK=6400 tRP=120 tRDPRE=80 tRAS=272 tRCD=120 tRC=392
<7>[ 50.550298] xe 0000:00:02.0: [drm:icl_get_qgv_points.constprop.0 [xe]] QGV 3: DCLK=8534 tRP=160 tRDPRE=96 tRAS=360 tRCD=160 tRC=520
<7>[ 50.550571] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 0: num_planes=0 deratedbw=23530 peakbw: 38400
<7>[ 50.550839] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 1: num_planes=0 deratedbw=36260 peakbw: 76800
<7>[ 50.551082] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.551314] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW0 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.551561] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 0: num_planes=0 deratedbw=27998 peakbw: 38400
<7>[ 50.551806] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.552022] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.552229] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW1 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.552424] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 0: num_planes=0 deratedbw=30935 peakbw: 38400
<7>[ 50.552619] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.552837] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.553028] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW2 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.553216] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 0: num_planes=0 deratedbw=32647 peakbw: 38400
<7>[ 50.553394] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.553599] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.553774] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW3 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.553926] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 0: num_planes=0 deratedbw=33577 peakbw: 38400
<7>[ 50.554074] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.554217] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.554356] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW4 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.554490] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 0: num_planes=0 deratedbw=34061 peakbw: 38400
<7>[ 50.554617] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 1: num_planes=0 deratedbw=38000 peakbw: 76800
<7>[ 50.554752] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 2: num_planes=0 deratedbw=38000 peakbw: 102400
<7>[ 50.554882] xe 0000:00:02.0: [drm:tgl_get_bw_info.isra.0 [xe]] BW5 / QGV 3: num_planes=0 deratedbw=38000 peakbw: 136544
<7>[ 50.555014] xe 0000:00:02.0: [drm:intel_display_device_info_runtime_init [xe]] rawclk rate: 38400 kHz
<7>[ 50.555652] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Set default to SSC at 120000 kHz
<7>[ 50.555815] xe 0000:00:02.0: [drm:intel_bios_init [xe]] VBT signature "$VBT LUNARLAKE ", BDB version 260
<7>[ 50.555955] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 1 (size 10, min size 7)
<7>[ 50.556093] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 2 (size 405, min size 5)
<7>[ 50.556224] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 9 (size 100, min size 100)
<7>[ 50.556347] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 12 (size 19, min size 19)
<7>[ 50.556467] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 27 (size 848, min size 848)
<7>[ 50.556581] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 40 (size 34, min size 34)
<7>[ 50.556685] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Generating LFP data table pointers
<7>[ 50.556816] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 41 (size 148, min size 148)
<7>[ 50.556925] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 42 (size 1366, min size 1366)
<7>[ 50.557025] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 43 (size 305, min size 305)
<7>[ 50.557122] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 44 (size 136, min size 136)
<7>[ 50.557220] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 52 (size 822, min size 822)
<7>[ 50.557317] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found BDB block 56 (size 210, min size 210)
<7>[ 50.557406] xe 0000:00:02.0: [drm:intel_bios_init [xe]] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120000 display_clock_mode 1 fdi_rx_polarity_inverted 0
<7>[ 50.557497] xe 0000:00:02.0: [drm:intel_bios_init [xe]] crt_ddc_bus_pin: 2
<7>[ 50.557584] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Expected child device config size for VBT version 260 not known; assuming 40
<7>[ 50.557671] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x1806
<7>[ 50.557780] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.557885] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.557982] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Found VBT child device with type 0x68c6
<7>[ 50.558072] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Skipping SDVO device mapping
<7>[ 50.558158] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port A VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:1 DSI:0 DP++:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
<7>[ 50.558240] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port D VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.558321] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port E VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.558399] xe 0000:00:02.0: [drm:intel_bios_init [xe]] Port F VBT info: CRT:0 DVI:0 HDMI:0 DP:1 eDP:0 DSI:0 DP++:0 LSPCON:0 USB-Type-C:1 TBT:1 DSC:0
<7>[ 50.558480] xe 0000:00:02.0: [drm:intel_power_domains_init [xe]] Allowed DC state mask 0a
<7>[ 50.558601] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.558769] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_1
<7>[ 50.558911] xe 0000:00:02.0: [drm:intel_cdclk_init_hw [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.559074] xe 0000:00:02.0: [drm:gen9_dbuf_slices_update [xe]] Updating dbuf slices to 0xf
<7>[ 50.559243] xe 0000:00:02.0: [drm:icl_display_core_init [xe]] Unknown memory configuration; disabling address buddy logic.
<7>[ 50.559373] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling always-on
<7>[ 50.559472] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 50.559576] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 00
<7>[ 50.559703] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_2
<6>[ 50.559819] xe 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=none:owns=mem
<7>[ 50.559843] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_A
<7>[ 50.559968] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_B
<7>[ 50.560063] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_C
<7>[ 50.560146] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PW_D
<7>[ 50.560497] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling PICA_TC
<7>[ 50.560657] xe 0000:00:02.0: [drm:intel_dmc_init [xe]] Loading i915/xe2lpd_dmc.bin
<7>[ 50.562046] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 0:
<7>[ 50.562149] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x8f074 = 0x86fc0
<7>[ 50.562239] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x8f034 = 0xc003b400 (EVT_CTL)
<7>[ 50.562326] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x8f004 = 0x4240408 (EVT_HTP)
<7>[ 50.562410] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x8f044 = 0xc0023200 (EVT_CTL)
<7>[ 50.562491] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x8f014 = 0x57b856f4 (EVT_HTP)
<7>[ 50.562577] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 1:
<7>[ 50.562655] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f074 = 0x97fc0
<7>[ 50.562743] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f040 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.562844] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f010 = 0x28542840 (EVT_HTP)
<7>[ 50.562944] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f03c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.562986] xe 0000:00:02.0: [drm:intel_fbc_init [xe]] Sanitized enable_fbc value: 1
<7>[ 50.563043] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f00c = 0x29802864 (EVT_HTP)
<7>[ 50.563128] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f044 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.563121] xe 0000:00:02.0: [drm:skl_wm_init [xe]] SAGV supported: yes, original SAGV block time: 12 us
<7>[ 50.563207] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f014 = 0x398c394c (EVT_HTP)
<7>[ 50.563217] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM0 latency 7 (7.0 usec)
<7>[ 50.563285] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 2:
<7>[ 50.563296] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM1 latency 101 (101.0 usec)
<7>[ 50.563358] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f474 = 0x9ffc0
<7>[ 50.563371] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM2 latency 101 (101.0 usec)
<7>[ 50.563432] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f440 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.563446] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM3 latency 101 (101.0 usec)
<7>[ 50.563512] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f410 = 0xa9bca9a8 (EVT_HTP)
<7>[ 50.563522] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM4 latency 94 (94.0 usec)
<7>[ 50.563590] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f43c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.563596] xe 0000:00:02.0: [drm:intel_print_wm_latency [xe]] Gen9 Plane WM5 latency 101 (101.0 usec)
<7>[ 50.563680] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f40c = 0xaae8a9cc (EVT_HTP)
<7>[ 50.563795] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f444 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.563894] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f414 = 0xbabcba7c (EVT_HTP)
<7>[ 50.563993] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] DMC 3:
<7>[ 50.564072] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[0]: 0x5f874 = 0x547c0
<7>[ 50.564151] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[1]: 0x5f840 = 0xc0033100 (EVT_CTL) (disabling)
<7>[ 50.564226] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[2]: 0x5f810 = 0x26dc26c8 (EVT_HTP)
<7>[ 50.564299] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[3]: 0x5f83c = 0xc0032d00 (EVT_CTL) (disabling)
<7>[ 50.564371] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[4]: 0x5f80c = 0x280826ec (EVT_HTP)
<7>[ 50.564442] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[5]: 0x5f844 = 0xc0033200 (EVT_CTL) (disabling)
<7>[ 50.564513] xe 0000:00:02.0: [drm:dmc_load_work_fn [xe]] mmio[6]: 0x5f814 = 0x37dc379c (EVT_HTP)
<7>[ 50.567723] xe 0000:00:02.0: [drm:intel_display_driver_probe_nogem [xe]] 3 display pipes available.
<7>[ 50.570432] xe 0000:00:02.0: [drm:intel_cdclk_dump_config [xe]] Current CDCLK 192000 kHz, VCO 614400 kHz, ref 38400 kHz, bypass 19200 kHz, voltage level 0
<7>[ 50.570588] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max CD clock rate: 652800 kHz
<7>[ 50.570743] xe 0000:00:02.0: [drm:intel_update_max_cdclk [xe]] Max dotclock rate: 1305600 kHz
<7>[ 50.570970] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:188:DDI A/PHY A] Using AUX CH A (VBT)
<7>[ 50.571202] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding eDP connector on [ENCODER:188:DDI A/PHY A]
<7>[ 50.571420] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel type (VBT): 2
<7>[ 50.571583] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Selected panel type (VBT): 2
<7>[ 50.571737] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] DRRS supported mode is seamless
<7>[ 50.571871] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Found panel mode in BIOS VBT legacy lfp table: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
<7>[ 50.572019] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT initial LVDS value 300
<7>[ 50.572147] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel manufacturer name: MS_, product code: 3, serial number: 3, year of manufacture: 2002
<7>[ 50.572274] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Panel name: LFP_PanelName
<7>[ 50.572399] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] Seamless DRRS min refresh rate: 0 Hz
<7>[ 50.572523] xe 0000:00:02.0: [drm:intel_bios_init_panel [xe]] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 6, level 255, controller 0
<7>[ 50.572670] xe 0000:00:02.0: [drm:intel_pps_init [xe]] [ENCODER:188:DDI A/PHY A] initial power sequencer: PPS 0
<7>[ 50.572993] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.573120] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.573239] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.573355] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.573467] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.573734] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.574232] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<6>[ 50.575859] xe 0000:00:02.0: [drm] Finished loading DMC firmware i915/xe2lpd_dmc.bin (v2.28)
<7>[ 50.575863] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 50.576020] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006f
<7>[ 50.577869] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 50.578481] xe 0000:00:02.0: [drm:drm_dp_dump_desc [drm_display_helper]] AUX A/DDI A/PHY A: DP sink: OUI 38-ec-11 dev-ID HW-rev 7.3 SW-rev 0.0 quirks 0x0000
<7>[ 50.579308] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] eDP DPCD: 05 83 85 04 1e
<7>[ 50.580691] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] eDP panel supports PSR version 3
<7>[ 50.581242] xe 0000:00:02.0: [drm:intel_psr_init_dpcd [xe]] PSR2 supported
<7>[ 50.583369] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 50.593207] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 50.593218] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.593220] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.593221] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 50.593224] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.593225] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 50.593230] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.593231] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 50.593234] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.593274] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.593275] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 50.593276] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 50.593284] xe 0000:00:02.0: [drm:intel_panel_add_edid_fixed_modes [xe]] [CONNECTOR:189:eDP-1] using preferred EDID fixed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 50.593829] xe 0000:00:02.0: [drm:intel_dp_wait_source_oui [xe]] [CONNECTOR:189:eDP-1] Performing OUI wait (0 ms)
<7>[ 50.594379] xe 0000:00:02.0: [drm:intel_dp_aux_init_backlight_funcs [xe]] [CONNECTOR:189:eDP-1] Detected unsupported HDR backlight interface version 0
<7>[ 50.594505] xe 0000:00:02.0: [drm:intel_panel_init [xe]] [CONNECTOR:189:eDP-1] DRRS type: none
<7>[ 50.594654] xe 0000:00:02.0: [drm:cnp_setup_backlight [xe]] [CONNECTOR:189:eDP-1] Using native PCH PWM for backlight control (controller=0)
<7>[ 50.594825] xe 0000:00:02.0: [drm:intel_backlight_setup [xe]] [CONNECTOR:189:eDP-1] backlight initialized, enabled, brightness 192000/192000
<7>[ 50.595010] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] bios power_up 1 backlight_on 1 backlight_off 1 power_down 500 power_cycle 5000
<7>[ 50.595110] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] vbt power_up 2000 backlight_on 10 backlight_off 2000 power_down 500 power_cycle 5000
<7>[ 50.595202] xe 0000:00:02.0: [drm:intel_pps_dump_state [xe]] spec power_up 2100 backlight_on 500 backlight_off 500 power_down 5000 power_cycle 5100
<7>[ 50.595286] xe 0000:00:02.0: [drm:pps_init_delays [xe]] panel power up delay 200, power down delay 50, power cycle delay 500
<7>[ 50.595368] xe 0000:00:02.0: [drm:pps_init_delays [xe]] backlight on delay 1, off delay 200
<7>[ 50.595480] xe 0000:00:02.0: [drm:pps_init_registers [xe]] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x60
<7>[ 50.595659] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:197:DDI TC1/PHY TC1] Using AUX CH USBC1 (VBT)
<7>[ 50.595830] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port D/TC#1: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.595975] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 50.596291] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:209:DDI TC2/PHY TC2] Using AUX CH USBC2 (VBT)
<7>[ 50.596410] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port E/TC#2: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.596520] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 50.596764] xe 0000:00:02.0: [drm:intel_dp_aux_ch [xe]] [ENCODER:217:DDI TC3/PHY TC3] Using AUX CH USBC3 (VBT)
<7>[ 50.596913] xe 0000:00:02.0: [drm:tc_phy_get_current_mode [xe]] Port F/TC#3: PHY mode: tbt-alt (ready: no, owned: no, HPD: disconnected)
<7>[ 50.597049] xe 0000:00:02.0: [drm:intel_dp_init_connector [xe]] Adding DP connector on [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 50.597447] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:82:pipe A] hw state readout: enabled
<7>[ 50.597568] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:134:pipe B] hw state readout: disabled
<7>[ 50.597685] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CRTC:186:pipe C] hw state readout: disabled
<7>[ 50.597790] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] hw state readout: enabled, pipe A
<7>[ 50.597896] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] hw state readout: disabled, pipe A
<7>[ 50.597998] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] hw state readout: disabled, pipe A
<7>[ 50.598081] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] hw state readout: disabled, pipe A
<7>[ 50.598168] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] hw state readout: disabled, pipe A
<7>[ 50.598243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] hw state readout: disabled, pipe A
<7>[ 50.598318] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] hw state readout: disabled, pipe B
<7>[ 50.598392] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] hw state readout: disabled, pipe B
<7>[ 50.598467] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] hw state readout: disabled, pipe B
<7>[ 50.598540] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] hw state readout: disabled, pipe B
<7>[ 50.598614] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] hw state readout: disabled, pipe B
<7>[ 50.598687] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] hw state readout: disabled, pipe B
<7>[ 50.598780] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] hw state readout: disabled, pipe C
<7>[ 50.598879] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] hw state readout: disabled, pipe C
<7>[ 50.598977] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] hw state readout: disabled, pipe C
<7>[ 50.599062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] hw state readout: disabled, pipe C
<7>[ 50.599135] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] hw state readout: disabled, pipe C
<7>[ 50.599206] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] hw state readout: disabled, pipe C
<7>[ 50.599976] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
<7>[ 50.600090] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:188:DDI A/PHY A] hw state readout: enabled, pipe A
<7>[ 50.600165] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port D/TC#1: sanitize mode (disconnected)
<7>[ 50.600243] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:197:DDI TC1/PHY TC1] hw state readout: disabled, pipe A
<7>[ 50.600311] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:199:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.600376] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:200:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.600440] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:201:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.600507] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port E/TC#2: sanitize mode (disconnected)
<7>[ 50.600579] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:209:DDI TC2/PHY TC2] hw state readout: disabled, pipe A
<7>[ 50.600643] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:211:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.600706] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:212:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.600793] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:213:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.600884] xe 0000:00:02.0: [drm:intel_tc_port_sanitize_mode [xe]] Port F/TC#3: sanitize mode (disconnected)
<7>[ 50.600982] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:217:DDI TC3/PHY TC3] hw state readout: disabled, pipe A
<7>[ 50.601062] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:219:DP-MST A] hw state readout: disabled, pipe A
<7>[ 50.601130] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:220:DP-MST B] hw state readout: disabled, pipe B
<7>[ 50.601196] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [ENCODER:221:DP-MST C] hw state readout: disabled, pipe C
<7>[ 50.601285] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:189:eDP-1] hw state readout: enabled
<7>[ 50.601357] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:198:DP-1] hw state readout: disabled
<7>[ 50.601426] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:210:DP-2] hw state readout: disabled
<7>[ 50.601493] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [CONNECTOR:218:DP-3] hw state readout: disabled
<7>[ 50.601637] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:32:plane 1A] min_cdclk 173855 kHz
<7>[ 50.601708] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:41:plane 2A] min_cdclk 0 kHz
<7>[ 50.601807] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:50:plane 3A] min_cdclk 0 kHz
<7>[ 50.601900] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:59:plane 4A] min_cdclk 0 kHz
<7>[ 50.601981] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:68:plane 5A] min_cdclk 0 kHz
<7>[ 50.602052] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:77:cursor A] min_cdclk 0 kHz
<7>[ 50.602115] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:84:plane 1B] min_cdclk 0 kHz
<7>[ 50.602181] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:93:plane 2B] min_cdclk 0 kHz
<7>[ 50.602245] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:102:plane 3B] min_cdclk 0 kHz
<7>[ 50.602309] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:111:plane 4B] min_cdclk 0 kHz
<7>[ 50.602373] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:120:plane 5B] min_cdclk 0 kHz
<7>[ 50.602436] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:129:cursor B] min_cdclk 0 kHz
<7>[ 50.602497] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:136:plane 1C] min_cdclk 0 kHz
<7>[ 50.602558] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:145:plane 2C] min_cdclk 0 kHz
<7>[ 50.602618] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:154:plane 3C] min_cdclk 0 kHz
<7>[ 50.602679] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:163:plane 4C] min_cdclk 0 kHz
<7>[ 50.602763] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:172:plane 5C] min_cdclk 0 kHz
<7>[ 50.602842] xe 0000:00:02.0: [drm:intel_modeset_setup_hw_state [xe]] [PLANE:181:cursor C] min_cdclk 0 kHz
<7>[ 50.603071] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:82:pipe A] dbuf slices 0x3, ddb (0 - 2048), active pipes 0x1, mbus joined: no
<7>[ 50.603145] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:134:pipe B] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.603218] xe 0000:00:02.0: [drm:skl_wm_get_hw_state [xe]] [CRTC:186:pipe C] dbuf slices 0x0, ddb (0 - 0), active pipes 0x1, mbus joined: no
<7>[ 50.603289] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe A data rate 1390840 num active planes 1
<7>[ 50.603380] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe B data rate 0 num active planes 0
<7>[ 50.603468] xe 0000:00:02.0: [drm:intel_bw_update_hw_state [xe]] pipe C data rate 0 num active planes 0
<7>[ 50.603586] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] CMTG readout: CMTG A: enabled, CMTG B: disabled, Transcoder A secondary: yes, Transcoder B secondary: no
<7>[ 50.603675] xe 0000:00:02.0: [drm:intel_cmtg_sanitize [xe]] Disabling CMTG A
<7>[ 50.603888] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [setup_hw_state]
<7>[ 50.604005] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 50.604101] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 24, dithering: 0
<7>[ 50.604185] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 50.604267] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 50.604348] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 50.604430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 50.604510] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 8102230, data_n: 8388608, link_m: 675185, link_n: 524288, tu: 64
<7>[ 50.604590] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 50.604670] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 50.604760] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 50.604850] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: disabled, selective update: disabled, panel replay: disabled, selective fetch: disabled
<7>[ 50.604938] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 50.605023] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x0
<7>[ 50.605099] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 50.605172] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 1, framestart delay: 1, MSA timing delay: 0
<7>[ 50.605244] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 105 vsync start: 103, vsync end: 96
<7>[ 50.605316] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1801, vmax vblank: 1801, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 50.605386] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.605456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.605526] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.605595] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 50.605662] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1801-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 50.605736] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 270000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 50.605809] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 50.605881] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 50.605953] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 50.606023] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 50.606088] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x0, dpll_md: 0xf42110, fp0: 0xf8, fp1: 0x1000000
<7>[ 50.606152] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x20000000 gamma_mode: 0x20000000 gamma_enable: 0 csc_enable: 0
<7>[ 50.606221] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 50.606291] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.606362] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.606433] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.606501] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.606567] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.606633] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 50.606697] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.606774] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.606844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 50.606912] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 50.606980] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:134:pipe B] enable: no [setup_hw_state]
<7>[ 50.607045] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:186:pipe C] enable: no [setup_hw_state]
<7>[ 50.607273] xe 0000:00:02.0: [drm:skl_get_initial_plane_config [xe]] [CRTC:82:pipe A][PLANE:32:plane 1A] with fb: size=2880x1800@32, offset=fec00000, pitch 11520, size 0x13c6800
<7>[ 50.607366] xe 0000:00:02.0: [drm:intel_plane_disable_noatomic [xe]] Disabling [PLANE:32:plane 1A] on [CRTC:82:pipe A]
<7>[ 50.647815] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT1: GuC CT safe-mode canceled
<7>[ 50.711831] xe 0000:00:02.0: [drm:safe_mode_worker_func [xe]] GT0: GuC CT safe-mode canceled
<6>[ 50.845011] xe 0000:00:02.0: [drm] ccs1 fused off
<6>[ 50.845014] xe 0000:00:02.0: [drm] ccs2 fused off
<6>[ 50.845015] xe 0000:00:02.0: [drm] ccs3 fused off
<7>[ 50.845116] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add rcs0 whitelist to engine
<7>[ 50.845207] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 50.845295] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 50.845375] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 50.845469] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs0 whitelist to engine
<7>[ 50.845558] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add bcs8 whitelist to engine
<7>[ 50.845655] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: Add ccs0 whitelist to engine
<7>[ 50.845734] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdafc-0xdaff]: allow read access
<7>[ 50.845809] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb00-0xdb1f]: allow read access
<7>[ 50.845880] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT0: REG[0xdb1c-0xdb1f]: allow rw access
<7>[ 50.846681] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying GT save-restore MMIOs
<7>[ 50.846768] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x4148] = 0x00000000
<7>[ 50.846850] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x8828] = 0x00800000
<7>[ 50.846930] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb104] = 0x08104440
<7>[ 50.847005] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb108] = 0x30200000
<7>[ 50.847077] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb154] = 0x00020000
<7>[ 50.847146] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xb158] = 0x0000007f
<7>[ 50.847217] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: flag:0x1
<7>[ 50.847284] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: mocs entries: 16
<7>[ 50.847350] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[0] 0x4000 0xc
<7>[ 50.847417] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 50.847483] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[2] 0x4008 0x130
<7>[ 50.847547] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 50.847611] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[4] 0x4010 0x100
<7>[ 50.847674] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[5] 0x4014 0x100
<7>[ 50.847742] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[6] 0x4018 0x100
<7>[ 50.847805] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[7] 0x401c 0x100
<7>[ 50.847871] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[8] 0x4020 0x100
<7>[ 50.847938] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[9] 0x4024 0x100
<7>[ 50.848004] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[10] 0x4028 0x100
<7>[ 50.848068] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[11] 0x402c 0x100
<7>[ 50.848132] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[12] 0x4030 0x100
<7>[ 50.848191] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[13] 0x4034 0x100
<7>[ 50.848248] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[14] 0x4038 0x100
<7>[ 50.848304] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT0: GLOB_MOCS[15] 0x403c 0x100
<7>[ 50.848360] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying rcs0 save-restore MMIOs
<7>[ 50.848423] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20c4] = 0x3f7e0306
<7>[ 50.848486] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x20d4] = 0xc080c080
<7>[ 50.848548] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d0] = 0x1000dafc
<7>[ 50.848609] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d4] = 0x1000db01
<7>[ 50.848668] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x24d8] = 0x0000db1c
<7>[ 50.848736] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe194] = 0x00400040
<7>[ 50.848805] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe48c] = 0x02000200
<7>[ 50.848872] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe49c] = 0x40004000
<7>[ 50.848938] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4c4] = 0x08000800
<7>[ 50.849002] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe4f0] = 0x00020002
<7>[ 50.849070] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7c8] = 0x00002000
<7>[ 50.849131] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0xe7cc] = 0x00009000
<7>[ 50.849409] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs0 save-restore MMIOs
<7>[ 50.849464] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220c4] = 0x3f7e0306
<7>[ 50.849518] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x220d4] = 0xc080c080
<7>[ 50.849712] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying bcs8 save-restore MMIOs
<7>[ 50.849785] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0c4] = 0x3f7e0306
<7>[ 50.849843] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x3ee0d4] = 0xc080c080
<7>[ 50.850191] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: Applying ccs0 save-restore MMIOs
<7>[ 50.850245] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0c4] = 0x3f7e0306
<7>[ 50.850296] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a0d4] = 0xc080c080
<7>[ 50.850349] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d0] = 0x1000dafc
<7>[ 50.850402] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d4] = 0x1000db01
<7>[ 50.850455] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT0: REG[0x1a4d8] = 0x0000db1c
<7>[ 50.850820] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 0] = 0x002533d7
<7>[ 50.850889] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 1] = 0x00000800
<7>[ 50.850955] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 2] = 0x00000014
<7>[ 50.851019] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 3] = 0x00000001
<7>[ 50.851080] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 4] = 0x000006cc
<7>[ 50.851136] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 5] = 0x64a00004
<7>[ 50.851193] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 6] = 0x00000000
<7>[ 50.851249] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 7] = 0x00000000
<7>[ 50.851306] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 8] = 0x00000000
<7>[ 50.851362] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[ 9] = 0x00000000
<7>[ 50.851416] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[10] = 0x00000000
<7>[ 50.851468] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[11] = 0x00000000
<7>[ 50.851520] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[12] = 0x00000000
<7>[ 50.851570] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT0: GuC param[13] = 0x00000000
<7>[ 50.851636] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT0: using 65535 GuC IDs
<7>[ 50.851771] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT0: using 256 doorbells
<7>[ 50.854913] xe 0000:00:02.0: [drm:xe_guc_capture_steered_list_init [xe]] GT0: capture found 42 ext-regs.
<7>[ 50.867625] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT0: ADS capture alloc size changed from 45056 to 20480
<7>[ 50.868384] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000064 [0x32/00]
<7>[ 50.868473] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: load still in progress, timeouts = 0, freq = 1850MHz (req 1850MHz), status = 0x00000072 [0x39/00]
<7>[ 50.877934] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT0: init took 9ms, freq = 1850MHz (req = 1850MHz), before = 1850MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.878380] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT0: GuC CT communication channel enabled
<7>[ 50.879546] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA rcs0 save-restore batch
<7>[ 50.879682] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x5588] = 0x04000400
<7>[ 50.879831] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6204] = 0x00400040
<7>[ 50.879948] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6208] = 0x00200020
<7>[ 50.880065] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x62a8] = 0x02400240
<7>[ 50.880178] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7010] = 0x40004000
<7>[ 50.880285] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x7044] = 0x04200420
<7>[ 50.880398] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x83a8] = 0x20002000
<7>[ 50.880536] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x6210] = ~0x18000|0x18000
<7>[ 50.886242] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: LRC WA bcs0 save-restore batch
<7>[ 50.886472] xe 0000:00:02.0: [drm:xe_gt_record_default_lrcs [xe]] GT0: REG[0x22204] = ~0x7e7e|0x606
<7>[ 50.886678] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<7>[ 50.890420] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT0: No non-register state to emit on graphics ver 20.04
<6>[ 50.897782] xe 0000:00:02.0: [drm] vcs1 fused off
<6>[ 50.897791] xe 0000:00:02.0: [drm] vcs2 fused off
<6>[ 50.897794] xe 0000:00:02.0: [drm] vcs3 fused off
<6>[ 50.897796] xe 0000:00:02.0: [drm] vcs4 fused off
<6>[ 50.897799] xe 0000:00:02.0: [drm] vcs5 fused off
<6>[ 50.897801] xe 0000:00:02.0: [drm] vcs6 fused off
<6>[ 50.897803] xe 0000:00:02.0: [drm] vcs7 fused off
<6>[ 50.897806] xe 0000:00:02.0: [drm] vecs1 fused off
<6>[ 50.897808] xe 0000:00:02.0: [drm] vecs2 fused off
<6>[ 50.897811] xe 0000:00:02.0: [drm] vecs3 fused off
<7>[ 50.897870] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vcs0 whitelist to engine
<7>[ 50.898213] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add vecs0 whitelist to engine
<7>[ 50.898542] xe 0000:00:02.0: [drm:whitelist_apply_to_hwe [xe]] GT1: Add gsccs0 whitelist to engine
<7>[ 50.900223] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying GT save-restore MMIOs
<7>[ 50.900485] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x4148] = 0x00000000
<7>[ 50.900771] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x82a8] = 0x00800000
<7>[ 50.901021] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb604] = 0x08104440
<7>[ 50.901239] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb608] = 0x30200000
<7>[ 50.901453] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb654] = 0x00020000
<7>[ 50.901661] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0xb658] = 0x0000007f
<7>[ 50.901887] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f08] = 0x00000020
<7>[ 50.902071] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f10] = 0x00400000
<7>[ 50.902289] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c3f1c] = 0x00000008
<7>[ 50.902491] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: flag:0x1
<7>[ 50.902710] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: mocs entries: 16
<7>[ 50.902961] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[0] 0x4000 0xc
<7>[ 50.903170] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[1] 0x4004 0x10c
<7>[ 50.903379] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[2] 0x4008 0x130
<7>[ 50.903594] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[3] 0x400c 0x13c
<7>[ 50.903817] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[4] 0x4010 0x100
<7>[ 50.904005] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[5] 0x4014 0x100
<7>[ 50.904183] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[6] 0x4018 0x100
<7>[ 50.904384] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[7] 0x401c 0x100
<7>[ 50.904581] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[8] 0x4020 0x100
<7>[ 50.904753] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[9] 0x4024 0x100
<7>[ 50.904903] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[10] 0x4028 0x100
<7>[ 50.905051] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[11] 0x402c 0x100
<7>[ 50.905195] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[12] 0x4030 0x100
<7>[ 50.905331] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[13] 0x4034 0x100
<7>[ 50.905466] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[14] 0x4038 0x100
<7>[ 50.905602] xe 0000:00:02.0: [drm:xe_mocs_init [xe]] GT1: GLOB_MOCS[15] 0x403c 0x100
<7>[ 50.905749] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vcs0 save-restore MMIOs
<7>[ 50.905920] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c00d4] = 0xc000c000
<7>[ 50.907242] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying vecs0 save-restore MMIOs
<7>[ 50.907418] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x1c80d4] = 0xc000c000
<7>[ 50.907951] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: Applying gsccs0 save-restore MMIOs
<7>[ 50.908139] xe 0000:00:02.0: [drm:xe_reg_sr_apply_mmio [xe]] GT1: REG[0x11a0d4] = 0xc000c000
<7>[ 50.908971] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 0] = 0x00c603d7
<7>[ 50.909099] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 1] = 0x00000000
<7>[ 50.909220] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 2] = 0x00000014
<7>[ 50.909338] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 3] = 0x00000001
<7>[ 50.909454] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 4] = 0x00001ae6
<7>[ 50.909575] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 5] = 0x64a00004
<7>[ 50.909707] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 6] = 0x00000000
<7>[ 50.909890] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 7] = 0x00000000
<7>[ 50.910007] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 8] = 0x00000000
<7>[ 50.910124] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[ 9] = 0x00000000
<7>[ 50.910247] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[10] = 0x00000000
<7>[ 50.910369] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[11] = 0x00000000
<7>[ 50.910488] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[12] = 0x00000000
<7>[ 50.910611] xe 0000:00:02.0: [drm:guc_print_params [xe]] GT1: GuC param[13] = 0x00000000
<7>[ 50.910797] xe 0000:00:02.0: [drm:xe_guc_id_mgr_init [xe]] GT1: using 65535 GuC IDs
<7>[ 50.910966] xe 0000:00:02.0: [drm:xe_guc_db_mgr_init [xe]] GT1: using 256 doorbells
<7>[ 50.936014] xe 0000:00:02.0: [drm:xe_guc_ads_populate [xe]] GT1: ADS capture alloc size changed from 45056 to 24576
<7>[ 50.937156] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000064 [0x32/00]
<7>[ 50.937322] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: load still in progress, timeouts = 0, freq = 800MHz (req 800MHz), status = 0x00000072 [0x39/00]
<7>[ 50.957207] xe 0000:00:02.0: [drm:__xe_guc_upload [xe]] GT1: init took 20ms, freq = 800MHz (req = 800MHz), before = 800MHz, status = 0x8002F034, timeouts = 0
<7>[ 50.957701] xe 0000:00:02.0: [drm:xe_guc_ct_enable [xe]] GT1: GuC CT communication channel enabled
<7>[ 50.959484] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 50.962182] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 50.965393] xe 0000:00:02.0: [drm:xe_lrc_emit_hwe_state_instructions [xe]] GT1: No non-register state to emit on graphics ver 20.04
<7>[ 51.008773] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GuC
<7>[ 51.012617] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] Enabled dbuf slices 0xf -> 0xf (total dbuf slices 0xf), mbus joined? no->yes
<7>[ 51.013043] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [CRTC:82:pipe A] dbuf slices 0x3 -> 0xf, ddb (0 - 2048) -> (0 - 4096), active pipes 0x1 -> 0x1
<7>[ 51.013473] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] ddb ( 0 - 0) -> (4054 - 4096), size 0 -> 42
<7>[ 51.013846] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.014299] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.014690] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.015124] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.015500] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.017705] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0xffff0072 0x13410e72)
<7>[ 51.018177] xe 0000:00:02.0: [drm:intel_dbuf_mbus_join_update [xe]] Changing mbus joined: no -> yes (pipe: A)
<7>[ 51.018545] xe 0000:00:02.0: [drm:intel_dbuf_mdclk_cdclk_ratio_update [xe]] Updating dbuf ratio to 8 (mbus joined: yes)
<7>[ 51.030593] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc010e72)
<7>[ 51.043058] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:189:eDP-1] adding connector to sysfs
<7>[ 51.050332] xe 0000:00:02.0: [drm:intel_backlight_device_register [xe]] [CONNECTOR:189:eDP-1] backlight device intel_backlight registered
<7>[ 51.051233] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX A/DDI A/PHY A bus for card0-eDP-1
<7>[ 51.054101] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:189:eDP-1] generating connector hotplug event
<7>[ 51.054205] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:198:DP-1] adding connector to sysfs
<7>[ 51.054744] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC1/DDI TC1/PHY TC1 bus for card0-DP-1
<7>[ 51.055602] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:198:DP-1] generating connector hotplug event
<7>[ 51.055652] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:210:DP-2] adding connector to sysfs
<7>[ 51.056081] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC2/DDI TC2/PHY TC2 bus for card0-DP-2
<7>[ 51.056646] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:210:DP-2] generating connector hotplug event
<7>[ 51.056684] xe 0000:00:02.0: [drm:drm_sysfs_connector_add] [CONNECTOR:218:DP-3] adding connector to sysfs
<7>[ 51.057098] xe 0000:00:02.0: [drm:intel_dp_connector_register [xe]] registering AUX USBC3/DDI TC3/PHY TC3 bus for card0-DP-3
<7>[ 51.057635] xe 0000:00:02.0: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:218:DP-3] generating connector hotplug event
<6>[ 51.057665] [drm] Initialized xe 1.1.0 for 0000:00:02.0 on minor 0
<7>[ 51.057691] xe 0000:00:02.0: [drm:intel_opregion_resume [xe]] 4 outputs detected
<6>[ 51.064859] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
<6>[ 51.067186] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
<7>[ 51.068376] xe 0000:00:02.0: [drm:intel_audio_init [xe]] use AUD_FREQ_CNTRL of 0x8010 (init value 0x8010)
<7>[ 51.068511] xe 0000:00:02.0: [drm:intel_audio_cdclk_change_post.part.0 [xe]] aud_ts_cdclk set to M=60, N=480
<7>[ 51.068972] check_position_fix: snd_hda_intel 0000:00:1f.3: Using SKL position fix
<7>[ 51.069976] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.070142] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.070297] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:198:DP-1] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.070400] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.070523] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.070626] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:210:DP-2] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.070729] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.070799] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [PLANE:32:plane 1A] no fb, skipping
<7>[ 51.070869] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 51.070935] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:134:pipe B] not active, skipping
<7>[ 51.070988] xe 0000:00:02.0: [drm:intel_hotplug_detect_connector [xe]] [CONNECTOR:218:DP-3] status updated from unknown to disconnected (epoch counter 0->1)
<7>[ 51.071044] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] [CRTC:186:pipe C] not active, skipping
<7>[ 51.071101] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.071150] xe 0000:00:02.0: [drm:intel_fbdev_setup [xe]] no active fbs found, not using BIOS config
<6>[ 51.071223] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [xe])
<7>[ 51.071676] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 51.071727] xe 0000:00:02.0: [drm:intel_audio_component_get_power [xe]] restored AUD_FREQ_CNTRL to 0x8010
<7>[ 51.072134] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 51.072182] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 51.073168] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 51.073691] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 51.073832] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.073954] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 51.074173] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 51.074179] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.074181] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.074182] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 51.074185] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.074187] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 51.074192] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.074193] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 51.074196] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.074221] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 51.074360] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 51.075059] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 51.075177] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 51.075887] azx_first_init: snd_hda_intel 0000:00:1f.3: chipset global capabilities = 0x9b01
<7>[ 51.076397] azx_init_pci: snd_hda_intel 0000:00:1f.3: Clearing TCSEL
<7>[ 51.076405] azx_init_pci: snd_hda_intel 0000:00:1f.3: SCH snoop: Enabled
<7>[ 51.077292] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] status updated from unknown to connected
<5>[ 51.077704] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.077706] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 51.077707] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 51.077789] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 51.077866] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.077878] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 51.077888] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 51.078064] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 51.078072] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 51.078079] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 51.078196] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 51.078203] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 51.078209] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 51.078323] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 51.078330] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 51.078333] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 51.078334] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 51.078335] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 51.078401] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 51.078414] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[ 51.078416] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 16384x16384 config
<7>[ 51.078426] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 51.078488] xe 0000:00:02.0: [drm:__drm_fb_helper_initial_config_and_unlock [drm_kms_helper]] test CRTC 0 primary plane
<7>[ 51.078500] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] no BIOS fb, allocating a new one
<7>[ 51.079989] xe 0000:00:02.0: [drm:drm_sysfs_hotplug_event] generating hotplug event
<7>[ 51.085615] xe 0000:00:02.0: [drm:intel_fbdev_driver_fbdev_probe [xe]] allocated 2880x1800 fb: 0x01d96000
<6>[ 51.087335] fbcon: xedrmfb (fb0) is primary device
<7>[ 51.088575] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CONNECTOR:189:eDP-1] Limiting display bpp to 30 (EDID bpp 30, max requested bpp 36, max platform bpp 36)
<7>[ 51.088734] xe 0000:00:02.0: [drm:intel_dp_compute_config_limits [xe]] [ENCODER:188:DDI A/PHY A][CRTC:82:pipe A] DP link limits: pixel clock 347710 kHz DSC off max lanes 4 max rate 810000 max pipe_bpp 30 max link_bpp 30.0000
<7>[ 51.088876] xe 0000:00:02.0: [drm:intel_dp_compute_link_config [xe]] DP lane count 4 clock 432000 bpp input 30 compressed 0.0000 link rate required 1303913 available 1728000
<7>[ 51.089140] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] hw max bpp: 30, pipe bpp: 30, dithering: 0
<7>[ 51.089389] xe 0000:00:02.0: [drm:intel_ddi_compute_config_late [xe]] [ENCODER:188:DDI A/PHY A] [CRTC:82:pipe A]
<7>[ 51.089634] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dp_m_n (expected tu 64 data 8102230/8388608 link 675185/524288, found tu 64, data 6329869/8388608 link 421991/524288)
<7>[ 51.089910] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in dpll_hw_state.cx0pll C10
<7>[ 51.090106] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] expected:
<7>[ 51.090293] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: yes,
<7>[ 51.090479] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] quot: 40960, rem: 0, den: 1,
<7>[ 51.090658] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 140, tx_clk_div: 1.
<7>[ 51.090850] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.091058] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.091276] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0xf4, pll[1] = 0x0, pll[2] = 0xf8, pll[3] = 0x0
<7>[ 51.091492] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.091730] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.091958] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0xa0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.092193] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x84, pll[17] = 0x4f, pll[18] = 0xe5, pll[19] = 0x23
<7>[ 51.092426] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] found:
<7>[ 51.092643] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_hw_state: fracen: no,
<7>[ 51.092871] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] multiplier: 225, tx_clk_div: 1.
<7>[ 51.093071] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] c10pll_rawhw_state:
<7>[ 51.093265] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] tx: 0x10, cmn: 0x21
<7>[ 51.093457] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[0] = 0x4, pll[1] = 0x0, pll[2] = 0xa2, pll[3] = 0x1
<7>[ 51.093648] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[4] = 0x0, pll[5] = 0x0, pll[6] = 0x0, pll[7] = 0x0
<7>[ 51.093857] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[8] = 0x0, pll[9] = 0x1, pll[10] = 0x0, pll[11] = 0x0
<7>[ 51.094038] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[12] = 0x0, pll[13] = 0x0, pll[14] = 0x0, pll[15] = 0x1
<7>[ 51.094178] xe 0000:00:02.0: [drm:intel_cx0pll_dump_hw_state [xe]] pll[16] = 0x85, pll[17] = 0xf, pll[18] = 0xe6, pll[19] = 0x23
<7>[ 51.094316] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in pipe_bpp (expected 24, found 30)
<7>[ 51.094464] xe 0000:00:02.0: [drm:intel_pipe_config_compare [xe]] [CRTC:82:pipe A] fastset requirement not met in port_clock (expected 270000, found 432000)
<7>[ 51.094610] xe 0000:00:02.0: [drm:intel_atomic_check [xe]] [CRTC:82:pipe A] fastset requirement not met, forcing full modeset
<7>[ 51.094832] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] ddb ( 0 - 0) -> ( 0 - 4054), size 0 -> 4054
<7>[ 51.094976] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> *wm0,*wm1,*wm2,*wm3,*wm4,*wm5, wm6, wm7,*twm,*swm,*stwm
<7>[ 51.095100] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] lines 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 1, 12, 12, 12, 11, 12, 0, 0, 0, 3, 0
<7>[ 51.095221] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] blocks 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 24, 289, 289, 289, 265, 289, 0, 0, 38, 73, 87
<7>[ 51.095339] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:32:plane 1A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 28, 319, 319, 319, 293, 319, 0, 0, 39, 82, 88
<7>[ 51.095455] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.095568] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.095679] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.095800] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:41:plane 2A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.095906] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.096001] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.096088] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.096170] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:50:plane 3A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.096249] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.096335] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.096427] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.096518] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:59:plane 4A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.096614] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.096703] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.096809] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.096892] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:68:plane 5A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.097005] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] level wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm -> wm0, wm1, wm2, wm3, wm4, wm5, wm6, wm7, twm, swm, stwm
<7>[ 51.097164] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] lines 1, 1, 1, 1, 1, 1, 0, 0, 1, 1, 1 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.097312] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] blocks 7, 7, 7, 7, 7, 7, 0, 0, 7, 7, 7 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.097449] xe 0000:00:02.0: [drm:skl_compute_wm [xe]] [PLANE:77:cursor A] min_ddb 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
<7>[ 51.097595] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] [CRTC:82:pipe A] data rate 1390840 num active planes 1
<7>[ 51.097814] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 0: max bw 23530 required 1461 qgv_peak_bw: 38400
<7>[ 51.097976] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 1: max bw 36260 required 1461 qgv_peak_bw: 38400
<7>[ 51.098098] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 2: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.098218] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] QGV point 3: max bw 38000 required 1461 qgv_peak_bw: 38400
<7>[ 51.098335] xe 0000:00:02.0: [drm:intel_bw_atomic_check [xe]] Matching peaks QGV bw: 38400 for required data rate: 1461
<7>[ 51.098467] xe 0000:00:02.0: [drm:intel_bw_calc_min_cdclk [xe]] new bandwidth min cdclk (27165 kHz) > old min cdclk (0 kHz)
<7>[ 51.098617] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [CRTC:82:pipe A] enable: yes [modeset]
<7>[ 51.098759] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] active: yes, output_types: EDP (0x100), output format: RGB, sink format: RGB
<7>[ 51.098874] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] cpu_transcoder: A, pipe bpp: 30, dithering: 0
<7>[ 51.099028] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] MST master transcoder: <invalid>
<7>[ 51.099193] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port sync: master transcoder: <invalid>, slave transcoder bitmask = 0x0
<7>[ 51.099360] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] joiner: no, pipes: 0x0
<7>[ 51.099526] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] splitter: disabled, link count 0, overlap 0
<7>[ 51.099689] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m_n: lanes: 4; data_m: 6329869, data_n: 8388608, link_m: 421991, link_n: 524288, tu: 64
<7>[ 51.099866] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dp m2_n2: lanes: 4; data_m: 0, data_n: 0, link_m: 0, link_n: 0, tu: 0
<7>[ 51.099989] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] fec: disabled, enhanced framing: disabled
<7>[ 51.100098] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] sdp split: disabled
<7>[ 51.100207] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] psr: enabled, selective update: enabled, panel replay: disabled, selective fetch: enabled
<7>[ 51.100302] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] minimum HBlank: 0
<7>[ 51.100395] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] audio: 0, infoframes: 0, infoframes enabled: 0x4
<7>[ 51.100488] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] DP SDP: VSC, revision 4, length 14
<7>[ 51.100582] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pixelformat: RGB
<7>[ 51.100675] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] colorimetry: sRGB
<7>[ 51.100784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] bpc: 0
<7>[ 51.100883] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dynamic range: VESA range
<7>[ 51.100977] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] content type: Not defined
<7>[ 51.101071] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] scanline offset: 1
<7>[ 51.101163] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vblank delay: 0, framestart delay: 1, MSA timing delay: 0
<7>[ 51.101253] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: no, vmin: 1906, vmax: 1906, flipline: 1906, pipeline full: 0, guardband: 106 vsync start: 103, vsync end: 97
<7>[ 51.101343] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] vrr: vmin vblank: 1800, vmax vblank: 1800, vmin vtotal: 1906, vmax vtotal: 1906
<7>[ 51.101430] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] requested mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.101517] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] adjusted mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 51.101603] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.101688] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x40 0xa
<7>[ 51.101784] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] crtc timings: clock=347710, hd=2880 hb=2880-3040 hs=2928-2960 ht=3040, vd=1800 vb=1800-1906 vs=1803-1809 vt=1906, flags=0xa
<7>[ 51.101869] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] port clock: 432000, pipe src: 2880x1800+0+0, pixel rate 347710
<7>[ 51.101951] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] linetime: 70, ips linetime: 0
<7>[ 51.102032] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] num_scalers: 2, scaler_users: 0x0, scaler_id: -1, scaling_filter: 0
<7>[ 51.102113] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pch pfit: 0x0+0+0, disabled, force thru: no
<7>[ 51.102194] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] ips: 0, double wide: 0, drrs: 0
<7>[ 51.102281] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] dpll_hw_state: dpll: 0x69780, dpll_md: 0x42110, fp0: 0x1a2, fp1: 0x1000000
<7>[ 51.102370] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] csc_mode: 0x0 gamma_mode: 0x0 gamma_enable: 0 csc_enable: 0
<7>[ 51.102456] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pre csc lut: 0 entries, post csc lut: 0 entries
<7>[ 51.102541] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.102624] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.102706] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.102802] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.102882] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] output csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.102962] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: pre offsets: 0x0000 0x0000 0x0000
<7>[ 51.103040] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.103119] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.103198] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: coefficients: 0x0000 0x0000 0x0000
<7>[ 51.103262] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] pipe csc: post offsets: 0x0000 0x0000 0x0000
<7>[ 51.103327] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:32:plane 1A] fb: [FB:190] 2880x1800 format = XR24 little-endian (0x34325258) modifier = 0x0, visible: yes
<7>[ 51.103397] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] rotation: 0x1, scaler: -1, scaling_filter: 0
<7>[ 51.103468] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] src: 2880.000000x1800.000000+0.000000+0.000000 dst: 2880x1800+0+0
<7>[ 51.103540] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:41:plane 2A] fb: [NOFB], visible: no
<7>[ 51.103609] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:50:plane 3A] fb: [NOFB], visible: no
<7>[ 51.103679] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:59:plane 4A] fb: [NOFB], visible: no
<7>[ 51.103763] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:68:plane 5A] fb: [NOFB], visible: no
<7>[ 51.103844] xe 0000:00:02.0: [drm:intel_crtc_state_dump [xe]] [PLANE:77:cursor A] fb: [NOFB], visible: no
<7>[ 51.104576] xe 0000:00:02.0: [drm:intel_edp_backlight_off [xe]]
<7>[ 51.106456] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 51.106563] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 51.106666] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 51.106779] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port A
<7>[ 51.106899] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 51.107016] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 51.107108] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 51.107192] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port B
<7>[ 51.107272] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 51.107352] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 51.107430] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 51.107507] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port C
<7>[ 51.107583] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 51.107658] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 51.107738] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 51.107822] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port D
<7>[ 51.107901] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 51.107978] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 51.108054] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 51.108123] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port E
<7>[ 51.108192] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 51.108260] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 51.108327] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 51.108394] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port F
<7>[ 51.108461] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 51.108527] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 51.108592] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 51.108658] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port G
<7>[ 51.108728] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 51.108800] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 51.108881] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 51.108959] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port H
<7>[ 51.109038] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 51.109109] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 51.109178] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<7>[ 51.109248] xe 0000:00:02.0: [drm:intel_audio_component_get_eld [xe]] Not valid for port I
<6>[ 51.113555] xe 0000:00:02.0: [drm] GT1: found GSC cv104.1.0
<7>[ 51.114303] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC FW async load completed
<6>[ 51.115438] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
<6>[ 51.116358] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
<6>[ 51.116663] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
<6>[ 51.117199] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
<7>[ 51.137874] xe 0000:00:02.0: [drm:xe_huc_auth [xe]] GT1: HuC: authenticated via GSC
<7>[ 51.313386] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 0
<7>[ 51.314123] xe 0000:00:02.0: [drm:intel_disable_transcoder [xe]] disabling pipe A
<7>[ 51.335973] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.336140] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power off
<7>[ 51.336372] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.336527] xe 0000:00:02.0: [drm:intel_pps_off_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power off time
<7>[ 51.336958] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb0000000 value: 0x00000000 PP_STATUS: 0xa0000002 PP_CONTROL: 0x00000060
<7>[ 51.389174] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x00000009, pins 0x00000010, long 0x00000000
<7>[ 51.389531] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - short
<7>[ 51.419798] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 51.420340] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling AUX_A
<7>[ 51.420297] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.421346] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring short hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.421347] xe 0000:00:02.0: [drm:intel_pmdemand_program_params [xe]] initiate pmdemand request values: (0x1800071 0xc01b072)
<7>[ 51.421783] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:188:DDI A/PHY A]
<7>[ 51.422178] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:197:DDI TC1/PHY TC1]
<7>[ 51.422543] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:199:DP-MST A]
<7>[ 51.422931] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:200:DP-MST B]
<7>[ 51.423282] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:201:DP-MST C]
<7>[ 51.423631] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:209:DDI TC2/PHY TC2]
<7>[ 51.423829] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 51.424011] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:211:DP-MST A]
<7>[ 51.424208] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 51.424407] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:212:DP-MST B]
<7>[ 51.424597] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 10
<7>[ 51.424762] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:213:DP-MST C]
<7>[ 51.425002] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 51.425148] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:217:DDI TC3/PHY TC3]
<7>[ 51.425477] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:219:DP-MST A]
<7>[ 51.425830] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:220:DP-MST B]
<7>[ 51.426184] xe 0000:00:02.0: [drm:intel_modeset_verify_disabled [xe]] [ENCODER:221:DP-MST C]
<7>[ 51.426558] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling AUX_A
<7>[ 51.428173] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turn panel power on
<7>[ 51.428534] xe 0000:00:02.0: [drm:wait_panel_power_cycle [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power cycle (492 ms remaining)
<7>[ 51.550914] xe 0000:00:02.0: [drm:gsc_work [xe]] GT1: GSC proxy init completed
<7>[ 51.928008] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb800000f value: 0x00000000 PP_STATUS: 0x08000001 PP_CONTROL: 0x00000060
<7>[ 52.007892] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.008366] xe 0000:00:02.0: [drm:intel_pps_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 wait for panel power on
<7>[ 52.008848] xe 0000:00:02.0: [drm:wait_panel_status [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 mask: 0xb000000f value: 0x80000008 PP_STATUS: 0x9000000a PP_CONTROL: 0x00000063
<7>[ 52.044930] xe 0000:00:02.0: [drm:icp_irq_handler [xe]] hotplug event received, stat 0x00010000, dig 0x0000000a, pins 0x00000010, long 0x00000010
<7>[ 52.045340] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] digital hpd on [ENCODER:188:DDI A/PHY A] - long
<7>[ 52.045736] xe 0000:00:02.0: [drm:intel_hpd_irq_handler [xe]] Received HPD interrupt on PIN 4 - cnt: 20
<7>[ 52.046209] xe 0000:00:02.0: [drm:intel_dp_hpd_pulse [xe]] ignoring long hpd on eDP [ENCODER:188:DDI A/PHY A]
<7>[ 52.136795] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.136794] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.136795] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 52.263898] xe 0000:00:02.0: [drm:wait_panel_status [xe]] Wait complete
<7>[ 52.266293] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD on
<7>[ 52.266787] xe 0000:00:02.0: [drm:intel_pps_vdd_on_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x0000006b
<7>[ 52.270404] xe 0000:00:02.0: [drm:drm_dp_read_dpcd_caps [drm_display_helper]] AUX A/DDI A/PHY A: DPCD: 14 1e 44 c1 00 00 01 c0 02 00 02 00 00 0b 80
<7>[ 52.271711] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Reloading eDP link rates
<7>[ 52.273018] xe 0000:00:02.0: [drm:intel_dp_start_link_train [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using LINK_RATE_SET value 05
<7>[ 52.274253] xe 0000:00:02.0: [drm:intel_dp_set_signal_levels [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] 8b/10b, lanes: 4, vswing levels: 0/0/0/0, pre-emphasis levels: 0/0/0/0
<7>[ 52.275420] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS1
<7>[ 52.276785] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Clock recovery OK
<7>[ 52.277201] xe 0000:00:02.0: [drm:intel_dp_program_link_training_pattern [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Using DP training pattern TPS4
<7>[ 52.278989] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Channel EQ done. DP Training successful
<7>[ 52.279328] xe 0000:00:02.0: [drm:intel_dp_link_train_phy [xe]] [CONNECTOR:189:eDP-1][ENCODER:188:DDI A/PHY A][DPRX] Link Training passed at link rate = 432000, lane count = 4
<7>[ 52.280144] xe 0000:00:02.0: [drm:intel_enable_transcoder [xe]] enabling pipe A
<7>[ 52.280751] xe 0000:00:02.0: [drm:intel_edp_backlight_on [xe]]
<7>[ 52.281145] xe 0000:00:02.0: [drm:intel_backlight_enable [xe]] pipe A
<7>[ 52.281537] xe 0000:00:02.0: [drm:intel_backlight_set_pwm_level [xe]] [CONNECTOR:189:eDP-1] set backlight PWM = 192000
<6>[ 52.283932] xe 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
<7>[ 52.283952] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] reserved 11059200 bytes of contiguous stolen space for FBC, limit: 2
<7>[ 52.284278] xe 0000:00:02.0: [drm:intel_fbc_update [xe]] Enabling FBC on [PLANE:32:plane 1A]
<7>[ 52.297685] xe 0000:00:02.0: [drm:intel_psr_post_plane_update [xe]] Enabling PSR2
<7>[ 52.300599] xe 0000:00:02.0: [drm:verify_connector_state [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.301133] xe 0000:00:02.0: [drm:intel_modeset_verify_crtc [xe]] [CRTC:82:pipe A]
<7>[ 52.302684] xe 0000:00:02.0: [drm:intel_edp_fixup_vbt_bpp [xe]] pipe has 30 bpp for eDP panel, overriding BIOS-provided max 24 bpp
<6>[ 52.305561] Console: switching to colour frame buffer device 180x56
<6>[ 52.319766] xe 0000:00:02.0: [drm] fb0: xedrmfb frame buffer device
<7>[ 52.329988] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display version: 20
<7>[ 52.330520] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: display stepping: B0
<7>[ 52.331005] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: cursor_needs_physical: no
<7>[ 52.331365] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_crawl: yes
<7>[ 52.331689] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_cdclk_squash: yes
<7>[ 52.332043] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ddi: yes
<7>[ 52.332325] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dp_mst: yes
<7>[ 52.332584] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsb: yes
<7>[ 52.332854] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_fpga_dbg: yes
<7>[ 52.333088] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_gmch: no
<7>[ 52.333304] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hotplug: yes
<7>[ 52.333562] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hti: no
<7>[ 52.333822] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_ipc: yes
<7>[ 52.334030] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_overlay: no
<7>[ 52.334221] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr: yes
<7>[ 52.334404] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_psr_hw_tracking: no
<7>[ 52.334584] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: overlay_needs_physical: no
<7>[ 52.334785] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: supports_tv: no
<7>[ 52.335021] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_hdcp: yes
<7>[ 52.335220] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dmc: yes
<7>[ 52.335402] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: has_dsc: yes
<7>[ 52.335573] xe 0000:00:02.0: [drm:intel_display_driver_register [xe]] i915 display info: rawclk rate: 38400 kHz
<7>[ 52.335861] xe 0000:00:02.0: [drm:drm_fb_helper_hotplug_event [drm_kms_helper]]
<7>[ 52.335893] xe 0000:00:02.0: [drm:drm_client_modeset_probe]
<7>[ 52.336582] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1]
<7>[ 52.336612] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:189:eDP-1]
<7>[ 52.337250] [drm:intel_dsm_detect.isra.0 [xe]] no _DSM method for intel device
<7>[ 52.337458] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PICA_TC
<7>[ 52.337670] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_D
<7>[ 52.337990] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_C
<7>[ 52.338498] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_B
<7>[ 52.339114] xe 0000:00:02.0: [drm:intel_dp_read_dsc_dpcd [xe]] DSC DPCD: 00 11 00 76 0b 01 01 80 00 01 06 66 08 00 00 00
<7>[ 52.339752] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] source rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000, 810000
<7>[ 52.340053] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] sink rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.340437] xe 0000:00:02.0: [drm:intel_dp_print_rates [xe]] common rates: 162000, 216000, 243000, 270000, 324000, 432000, 540000, 810000
<7>[ 52.341256] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Supported Monitor Refresh rate range is 40 Hz - 120 Hz
<5>[ 52.341277] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.341283] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.341288] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] Assigning EDID-1.4 digital sink color depth as 10 bpc.
<5>[ 52.341297] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.341303] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD monitor
<5>[ 52.341322] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.341327] xe 0000:00:02.0: [drm:update_display_info.part.0] [CONNECTOR:189:eDP-1] ELD size 20, SAD count 0
<5>[ 52.341336] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.341393] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] VRR capable: yes
<7>[ 52.341700] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] DFP max bpc 0, max dotclock 0, TMDS clock 0-0, PCON Max FRL BW 0Gbps
<7>[ 52.342944] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] PCON ENCODER DSC DPCD: 00 00 00 00 00 00 00 00 00 00 00 00 00
<7>[ 52.343274] xe 0000:00:02.0: [drm:intel_dp_set_edid [xe]] [CONNECTOR:189:eDP-1] RGB->YcbCr conversion? no, YCbCr 4:2:0 allowed? yes, YCbCr 4:4:4->4:2:0 conversion? no
<7>[ 52.343395] xe 0000:00:02.0: [drm:xe_pci_probe [xe]] d3cold: capable=no
<5>[ 52.346086] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.346095] [drm] DisplayID checksum invalid, remainder is 248
<5>[ 52.346100] [drm] DisplayID checksum invalid, remainder is 248
<7>[ 52.346204] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:189:eDP-1] probed modes:
<7>[ 52.346277] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] Probed mode: "2880x1800": 60 347710 2880 2928 2960 3040 1800 1803 1809 1906 0x48 0xa
<7>[ 52.346315] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1]
<7>[ 52.346348] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:198:DP-1]
<7>[ 52.347444] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.347923] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.348283] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 52.348694] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.350861] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:198:DP-1] disconnected
<7>[ 52.350918] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2]
<7>[ 52.350962] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:210:DP-2]
<7>[ 52.351394] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.351794] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:210:DP-2] disconnected
<7>[ 52.351838] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3]
<7>[ 52.351875] xe 0000:00:02.0: [drm:intel_dp_detect [xe]] [CONNECTOR:218:DP-3]
<7>[ 52.352299] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (disconnected -> tbt-alt)
<7>[ 52.352687] xe 0000:00:02.0: [drm:drm_helper_probe_single_connector_modes [drm_kms_helper]] [CONNECTOR:218:DP-3] disconnected
<7>[ 52.352765] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] enabled? yes
<7>[ 52.352778] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:198:DP-1] enabled? no
<7>[ 52.352785] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:210:DP-2] enabled? no
<7>[ 52.352792] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:218:DP-3] enabled? no
<7>[ 52.353378] xe 0000:00:02.0: [drm:drm_client_firmware_config.isra.0] Not using firmware configuration
<7>[ 52.353672] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CONNECTOR:189:eDP-1] found preferred mode: 2880x1800
<7>[ 52.353681] xe 0000:00:02.0: [drm:drm_client_modeset_probe] picking CRTCs for 2880x1800 config
<7>[ 52.353896] xe 0000:00:02.0: [drm:drm_client_modeset_probe] [CRTC:82:pipe A] desired mode 2880x1800 set (0,0)
<7>[ 52.358344] xe 0000:00:02.0: [drm:intel_power_well_enable [xe]] enabling DC_off
<7>[ 52.358741] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 02 to 00
<7>[ 52.361439] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling PW_2
<7>[ 52.364814] xe 0000:00:02.0: [drm:drm_client_hotplug] fbdev: ret=0
<7>[ 52.398175] xe 0000:00:02.0: [drm:drm_client_dev_restore] fbdev: ret=0
<7>[ 52.398294] [IGT] xe_module_load: finished subtest load, SUCCESS
<7>[ 52.398392] [IGT] xe_module_load: exiting, ret=0
<7>[ 52.442002] xe 0000:00:02.0: [drm:intel_backlight_device_update_status [xe]] updating intel_backlight, brightness=9600/192000
<7>[ 52.442135] xe 0000:00:02.0: [drm:intel_panel_actually_set_backlight [xe]] [CONNECTOR:189:eDP-1] set backlight level = 13892
<7>[ 52.455754] xe 0000:00:02.0: [drm:intel_power_well_disable [xe]] disabling DC_off
<7>[ 52.455901] xe 0000:00:02.0: [drm:skl_enable_dc6 [xe]] Enabling DC6
<7>[ 52.456005] xe 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [xe]] Setting DC state from 00 to 02
<7>[ 53.351938] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port D/TC#1: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.417201] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port F/TC#3: TC port mode reset (tbt-alt -> disconnected)
<7>[ 53.417337] xe 0000:00:02.0: [drm:intel_tc_port_reset_mode [xe]] Port E/TC#2: TC port mode reset (tbt-alt -> disconnected)
<7>[ 54.889250] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 turning VDD off
<7>[ 54.890224] xe 0000:00:02.0: [drm:intel_pps_vdd_off_sync_unlocked [xe]] [ENCODER:188:DDI A/PHY A] PPS 0 PP_STATUS: 0x80000008 PP_CONTROL: 0x00000067